git.sur5r.net Git - u-boot/blob - arch/arm/dts/imx7ulp.dtsi

   1 /*
   2  * Copyright 2015-2016 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <dt-bindings/clock/imx7ulp-clock.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include "skeleton.dtsi"
  13 #include "imx7ulp-pinfunc.h"
  14
  15 / {
  16         interrupt-parent = <&intc>;
  17
  18         aliases {
  19                 gpio0 = &gpio0;
  20                 gpio1 = &gpio1;
  21                 gpio2 = &gpio2;
  22                 gpio3 = &gpio3;
  23                 mmc0 = &usdhc0;
  24                 mmc1 = &usdhc1;
  25                 serial0 = &lpuart4;
  26                 serial1 = &lpuart5;
  27                 serial2 = &lpuart6;
  28                 serial3 = &lpuart7;
  29                 usbphy0 = &usbphy1;
  30                 i2c0 = &lpi2c4;
  31                 i2c1 = &lpi2c5;
  32                 i2c2 = &lpi2c6;
  33                 i2c3 = &lpi2c7;
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39
  40                 cpu0: cpu@0 {
  41                         compatible = "arm,cortex-a7";
  42                         device_type = "cpu";
  43                         reg = <0>;
  44                 };
  45         };
  46
  47         reserved-memory {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 ranges;
  51
  52                 /* global autoconfigured region for contiguous allocations */
  53                 linux,cma {
  54                         compatible = "shared-dma-pool";
  55                         reusable;
  56                         size = <0xC000000>;
  57                         alignment = <0x2000>;
  58                         linux,cma-default;
  59                 };
  60
  61                 rpmsg_reserved: rpmsg@9FFF0000 {
  62                         no-map;
  63                         reg = <0x9FF00000 0x100000>;
  64                 };
  65
  66         };
  67
  68         intc: interrupt-controller@40021000 {
  69                 compatible = "arm,cortex-a7-gic";
  70                 #interrupt-cells = <3>;
  71                 interrupt-controller;
  72                 reg = <0x40021000 0x1000>,
  73                       <0x40022000 0x100>;
  74         };
  75
  76         clocks {
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79
  80                 ckil: clock@0 {
  81                         compatible = "fixed-clock";
  82                         #clock-cells = <0>;
  83                         clock-frequency = <32768>;
  84                         clock-output-names = "ckil";
  85                 };
  86
  87                 osc: clock@1 {
  88                         compatible = "fixed-clock";
  89                         #clock-cells = <0>;
  90                         clock-frequency = <24000000>;
  91                         clock-output-names = "osc";
  92                 };
  93
  94                 sirc: clock@2 {
  95                         compatible = "fixed-clock";
  96                         #clock-cells = <0>;
  97                         clock-frequency = <16000000>;
  98                         clock-output-names = "sirc";
  99                 };
 100
 101                 firc: clock@3 {
 102                         compatible = "fixed-clock";
 103                         #clock-cells = <0>;
 104                         clock-frequency = <48000000>;
 105                         clock-output-names = "firc";
 106                 };
 107
 108                 upll: clock@4 {
 109                         compatible = "fixed-clock";
 110                         #clock-cells = <0>;
 111                         clock-frequency = <480000000>;
 112                         clock-output-names = "upll";
 113                 };
 114
 115                 mpll: clock@5 {
 116                         compatible = "fixed-clock";
 117                         #clock-cells = <0>;
 118                         clock-frequency = <480000000>;
 119                         clock-output-names = "mpll";
 120                 };
 121         };
 122
 123         sram: sram@20000000 {
 124                 compatible = "fsl,lpm-sram";
 125                 reg = <0x1fffc000 0x4000>;
 126         };
 127
 128         ahbbridge0: ahb-bridge0@40000000 {
 129                 compatible = "fsl,aips-bus", "simple-bus";
 130                 #address-cells = <1>;
 131                 #size-cells = <1>;
 132                 reg = <0x40000000 0x800000>;
 133                 ranges;
 134
 135                 edma0: dma-controller@40080000 {
 136                         #dma-cells = <2>;
 137                         compatible = "nxp,imx7ulp-edma";
 138                         reg = <0x40080000 0x2000>,
 139                                 <0x40210000 0x1000>;
 140                         dma-channels = <32>;
 141                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 142                                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 143                                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 144                                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
 145                                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 146                                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
 147                                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 148                                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 149                                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 150                                         <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 151                                         <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 152                                         <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 153                                         <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 154                                         <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 155                                         <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 156                                         <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 157                                         <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 158                         clock-names = "dma", "dmamux0";
 159                         clocks = <&clks IMX7ULP_CLK_DMA1>, <&clks IMX7ULP_CLK_DMA_MUX1>;
 160                 };
 161
 162                 mu: mu@40220000 {
 163                         compatible = "fsl,imx7ulp-mu", "fsl,imx6sx-mu";
 164                         reg = <0x40220000 0x1000>;
 165                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 166                                         <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 167                         status = "okay";
 168                 };
 169
 170                 nmi: nmi@40220000 {
 171                         compatible = "fsl,imx7ulp-nmi";
 172                         reg = <0x40220000 0x1000>;
 173                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 174                         status = "okay";
 175                 };
 176
 177                 rpmsg: rpmsg{
 178                         compatible = "fsl,imx7ulp-rpmsg";
 179                         memory-region = <&rpmsg_reserved>;
 180                         status = "disabled";
 181                 };
 182
 183                 snvs: snvs@40230000 {
 184                         compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
 185                         reg = <0x40230000 0x10000>;
 186
 187                         snvs_rtc: snvs-rtc-lp{
 188                                 compatible = "fsl,sec-v4.0-mon-rtc-lp";
 189                                 regmap =<&snvs>;
 190                                 offset = <0x34>;
 191                                 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 192                                 clock-names = "snvs-rtc";
 193                                 clocks = <&clks IMX7ULP_CLK_SNVS>;
 194                         };
 195                 };
 196
 197                 tpm5: tpm@40260000 {
 198                         compatible = "fsl,imx7ulp-tpm";
 199                         reg = <0x40260000 0x1000>;
 200                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 201                         clocks = <&clks IMX7ULP_CLK_LPTPM5>;
 202                 };
 203
 204                 lpit: 1@40270000 {
 205                         compatible = "fsl,imx-lpit";
 206                         reg = <0x40270000 0x1000>;
 207                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 208                         /*    clocks = <&lpclk>;*/
 209                         clocks = <&clks IMX7ULP_CLK_LPIT1>;
 210                         assigned-clock-rates = <48000000>;
 211                         assigned-clocks = <&clks IMX7ULP_CLK_LPIT1>;
 212                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 213                 };
 214
 215                 lpi2c4: lpi2c4@402B0000 {
 216                         compatible = "fsl,imx7ulp-lpi2c";
 217                         reg = <0x402B0000 0x10000>;
 218                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 219                         clocks = <&clks IMX7ULP_CLK_LPI2C4>;
 220                         clock-names = "ipg";
 221                         assigned-clocks = <&clks IMX7ULP_CLK_LPI2C4>;
 222                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 223                         assigned-clock-rates = <48000000>;
 224                         status = "disabled";
 225                 };
 226
 227                 lpi2c5: lpi2c4@402C0000 {
 228                         compatible = "fsl,imx7ulp-lpi2c";
 229                         reg = <0x402C0000 0x10000>;
 230                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 231                         clocks = <&clks IMX7ULP_CLK_LPI2C5>;
 232                         clock-names = "ipg";
 233                         assigned-clocks = <&clks IMX7ULP_CLK_LPI2C5>;
 234                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 235                         assigned-clock-rates = <48000000>;
 236                         status = "disabled";
 237                 };
 238
 239                 lpspi2: lpspi@40290000 {
 240                         compatible = "fsl,imx7ulp-spi";
 241                         reg = <0x40290000 0x10000>;
 242                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 243                         clocks = <&clks IMX7ULP_CLK_LPSPI2>;
 244                         clock-names = "ipg";
 245                         assigned-clocks = <&clks IMX7ULP_CLK_LPSPI2>;
 246                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 247                         assigned-clock-rates = <48000000>;
 248                         status = "disabled";
 249                 };
 250
 251                 lpspi3: lpspi@402A0000 {
 252                         compatible = "fsl,imx7ulp-spi";
 253                         reg = <0x402A0000 0x10000>;
 254                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 255                         clocks = <&clks IMX7ULP_CLK_LPSPI3>;
 256                         clock-names = "ipg";
 257                         assigned-clocks = <&clks IMX7ULP_CLK_LPSPI3>;
 258                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 259                         assigned-clock-rates = <48000000>;
 260                         status = "disabled";
 261                 };
 262
 263                 lpuart4: serial@402D0000 {
 264                         compatible = "fsl,imx7ulp-lpuart";
 265                         reg = <0x402D0000 0x1000>;
 266                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 267                         clocks = <&clks IMX7ULP_CLK_LPUART4>;
 268                         clock-names = "ipg";
 269                         assigned-clocks = <&clks IMX7ULP_CLK_LPUART4>;
 270                         assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>;
 271                         assigned-clock-rates = <24000000>;
 272                         status = "disabled";
 273                 };
 274
 275                 lpuart5: serial@402E0000 {
 276                         compatible = "fsl,imx7ulp-lpuart";
 277                         reg = <0x402E0000 0x1000>;
 278                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 279                         clocks = <&clks IMX7ULP_CLK_LPUART5>;
 280                         clock-names = "ipg";
 281                         assigned-clocks = <&clks IMX7ULP_CLK_LPUART5>;
 282                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 283                         assigned-clock-rates = <48000000>;
 284                         dmas = <&edma0 0 20>, <&edma0 0 19>;
 285                         dma-names = "tx","rx";
 286                         status = "disabled";
 287                 };
 288
 289                 usbotg1: usb@40330000 {
 290                         compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
 291                                 "fsl,imx27-usb";
 292                         reg = <0x40330000 0x200>;
 293                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 294                         clocks = <&clks IMX7ULP_CLK_USB0>;
 295                         fsl,usbphy = <&usbphy1>;
 296                         fsl,usbmisc = <&usbmisc1 0>;
 297                         ahb-burst-config = <0x0>;
 298                         tx-burst-size-dword = <0x8>;
 299                         rx-burst-size-dword = <0x8>;
 300                         status = "disabled";
 301                 };
 302
 303                 usbmisc1: usbmisc@40330200 {
 304                         #index-cells = <1>;
 305                         compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
 306                                 "fsl,imx6q-usbmisc";
 307                         reg = <0x40330200 0x200>;
 308                 };
 309
 310                 usbphy1: usbphy@0x40350000 {
 311                         compatible = "fsl,imx7ulp-usbphy",
 312                                 "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 313                         reg = <0x40350000 0x1000>;
 314                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 315                         clocks = <&clks IMX7ULP_CLK_USB_PHY>;
 316                         nxp,sim = <&sim>;
 317                 };
 318
 319                 usdhc0: usdhc@40370000 {
 320                         compatible = "fsl,imx7ulp-usdhc";
 321                         reg = <0x40370000 0x10000>;
 322                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 323                         clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
 324                                  <&clks IMX7ULP_CLK_NIC1_DIV>,
 325                                  <&clks IMX7ULP_CLK_USDHC0>;
 326                         clock-names ="ipg", "ahb", "per";
 327                         bus-width = <4>;
 328                         fsl,tuning-start-tap = <20>;
 329                         fsl,tuning-step= <2>;
 330                         status = "disabled";
 331                 };
 332
 333                 usdhc1: usdhc@40380000 {
 334                         compatible = "fsl,imx7ulp-usdhc";
 335                         reg = <0x40380000 0x10000>;
 336                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 337                         clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
 338                                  <&clks IMX7ULP_CLK_NIC1_DIV>,
 339                                  <&clks IMX7ULP_CLK_USDHC1>;
 340                         clock-names ="ipg", "ahb", "per";
 341                         bus-width = <4>;
 342                         fsl,tuning-start-tap = <20>;
 343                         fsl,tuning-step= <2>;
 344                         status = "disabled";
 345                 };
 346
 347                 wdog1: wdog@403D0000 {
 348                         compatible = "fsl,imx7ulp-wdt";
 349                         reg = <0x403D0000 0x10000>;
 350                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 351                         clocks = <&clks IMX7ULP_CLK_WDG1>;
 352                         assigned-clocks = <&clks IMX7ULP_CLK_WDG1>;
 353                         assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>;
 354                         /*
 355                          * As the 1KHz LPO clock rate is not trimed,the actually clock
 356                          * is about 667Hz, so the init timeout 60s should set 40*1000
 357                          * in the TOVAL register.
 358                          */
 359                         timeout-sec = <40>;
 360                 };
 361
 362                 wdog2: wdog@40430000 {
 363                         compatible = "fsl,imx7ulp-wdt";
 364                         reg = <0x40430000 0x10000>;
 365                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 366                         clocks = <&clks IMX7ULP_CLK_WDG2>;
 367                         assigned-clocks = <&clks IMX7ULP_CLK_WDG2>;
 368                         assigned-clocks-parents = <&clks IMX7ULP_CLK_FIRC>;
 369                         timeout-sec = <40>;
 370                 };
 371
 372                 clks: scg1@403E0000 {
 373                         compatible = "fsl,imx7ulp-scg1";
 374                         reg = <0x403E0000 0x10000>;
 375                         clocks = <&ckil>, <&osc>, <&sirc>,
 376                                 <&firc>, <&upll>, <&mpll>;
 377                         clock-names = "ckil", "osc", "sirc",
 378                                 "firc", "upll", "mpll";
 379                         #clock-cells = <1>;
 380                         assigned-clocks = <&clks IMX7ULP_CLK_LPTPM5>,
 381                                           <&clks IMX7ULP_CLK_USDHC1>;
 382                         assigned-clock-parents = <&clks IMX7ULP_CLK_OSC>,
 383                                                  <&clks IMX7ULP_CLK_NIC1_DIV>;
 384                 };
 385
 386                 pcc2: pcc2@403F0000 {
 387                         compatible  = "fsl,imx7ulp-pcc2";
 388                         reg = <0x403F0000 0x10000>;
 389                 };
 390
 391                 pmc1: pmc1@40400000 {
 392                         compatible = "fsl,imx7ulp-pmc1";
 393                         reg = <0x40400000 0x1000>;
 394                 };
 395
 396                 smc1: smc1@40410000 {
 397                         compatible = "fsl,imx7ulp-smc1";
 398                         reg = <0x40410000 0x1000>;
 399                 };
 400
 401         };
 402
 403         ahbbridge1: ahb-bridge1@40800000 {
 404                 compatible = "fsl,aips-bus", "simple-bus";
 405                 #address-cells = <1>;
 406                 #size-cells = <1>;
 407                 reg = <0x40800000 0x800000>;
 408                 ranges;
 409
 410                 lpi2c6: lpi2c6@40A40000 {
 411                         compatible = "fsl,imx7ulp-lpi2c";
 412                         reg = <0x40A40000 0x10000>;
 413                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 414                         clocks = <&clks IMX7ULP_CLK_LPI2C6>;
 415                         clock-names = "ipg";
 416                         assigned-clocks = <&clks IMX7ULP_CLK_LPI2C6>;
 417                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 418                         assigned-clock-rates = <48000000>;
 419                         status = "disabled";
 420                 };
 421
 422                 lpi2c7: lpi2c7@40A50000 {
 423                         compatible = "fsl,imx7ulp-lpi2c";
 424                         reg = <0x40A50000 0x10000>;
 425                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 426                         clocks = <&clks IMX7ULP_CLK_LPI2C7>;
 427                         clock-names = "ipg";
 428                         assigned-clocks = <&clks IMX7ULP_CLK_LPI2C7>;
 429                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 430                         assigned-clock-rates = <48000000>;
 431                         status = "disabled";
 432                 };
 433
 434                 lpuart6: serial@40A60000 {
 435                         compatible = "fsl,imx7ulp-lpuart";
 436                         reg = <0x40A60000 0x1000>;
 437                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 438                         clocks = <&clks IMX7ULP_CLK_LPUART6>;
 439                         clock-names = "ipg";
 440                         assigned-clocks = <&clks IMX7ULP_CLK_LPUART6>;
 441                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 442                         assigned-clock-rates = <48000000>;
 443                         dmas = <&edma0 0 22>, <&edma0 0 21>;
 444                         dma-names = "tx","rx";
 445                         status = "disabled";
 446                 };
 447
 448                 lpuart7: serial@40A70000 {
 449                         compatible = "fsl,imx7ulp-lpuart";
 450                         reg = <0x40A70000 0x1000>;
 451                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 452                         clocks = <&clks IMX7ULP_CLK_LPUART7>;
 453                         clock-names = "ipg";
 454                         assigned-clocks = <&clks IMX7ULP_CLK_LPUART7>;
 455                         assigned-clock-parents = <&clks IMX7ULP_CLK_FIRC>;
 456                         assigned-clock-rates = <50000000>;
 457                         dmas = <&edma0 0 24>, <&edma0 0 23>;
 458                         dma-names = "tx","rx";
 459                         status = "disabled";
 460                 };
 461
 462                 lcdif: lcdif@40AA0000 {
 463                         compatible = "fsl,imx7ulp-lcdif";
 464                         reg = <0x40aa0000 0x10000>;
 465                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 466                         clocks = <&clks IMX7ULP_CLK_DUMMY>,
 467                                  <&clks IMX7ULP_CLK_LCDIF>,
 468                                  <&clks IMX7ULP_CLK_DUMMY>;
 469                         clock-names = "axi", "pix", "disp_axi";
 470                         status = "disabled";
 471                 };
 472
 473                 mipi_dsi: mipi_dsi@40A90000 {
 474                         compatible = "fsl,imx7ulp-mipi-dsi";
 475                         reg = <0x40A90000 0x10000>;
 476                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 477                         clocks = <&clks IMX7ULP_CLK_DSI>;
 478                         clock-names = "mipi_dsi_clk";
 479                         sim = <&sim>;
 480                         status = "disabled";
 481                 };
 482
 483                 mmdc: mmdc@40ab0000 {
 484                         compatible = "fsl,imx7ulp-mmdc";
 485                         reg = <0x40ab0000 0x4000>;
 486                 };
 487
 488                 pcc3: pcc3@40B30000 {
 489                         compatible  = "fsl,imx7ulp-pcc3";
 490                         reg = <0x40B30000 0x10000>;
 491                 };
 492
 493                 iomuxc: iomuxc@4103D000 {
 494                         compatible = "fsl,imx7ulp-iomuxc-0";
 495                         reg = <0x4103D000 0x1000>;
 496                         fsl,mux_mask = <0xf00>;
 497                         status = "disabled";
 498                 };
 499
 500                 iomuxc1: iomuxc1@40ac0000 {
 501                         compatible = "fsl,imx7ulp-iomuxc-1";
 502                         reg = <0x40ac0000 0x1000>;
 503                         fsl,mux_mask = <0xf00>;
 504                 };
 505
 506                 gpio0: gpio@40ae0000 {
 507                         compatible = "fsl,imx7ulp-gpio";
 508                         reg = <0x40ae0000 0x1000 0x400F0000 0x40>;
 509                         gpio-controller;
 510                         #gpio-cells = <2>;
 511                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 512                         interrupt-controller;
 513                         #interrupt-cells = <2>;
 514                         gpio-ranges = <&iomuxc1 0 0 32>;
 515                 };
 516
 517                 gpio1: gpio@40af0000 {
 518                         compatible = "fsl,imx7ulp-gpio";
 519                         reg = <0x40af0000 0x1000 0x400F0040 0x40>;
 520                         gpio-controller;
 521                         #gpio-cells = <2>;
 522                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 523                         interrupt-controller;
 524                         #interrupt-cells = <2>;
 525                         gpio-ranges = <&iomuxc1 0 32 32>;
 526                 };
 527
 528                 gpio2: gpio@40b00000 {
 529                         compatible = "fsl,imx7ulp-gpio";
 530                         reg = <0x40b00000 0x1000 0x400F0080 0x40>;
 531                         gpio-controller;
 532                         #gpio-cells = <2>;
 533                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 534                         interrupt-controller;
 535                         #interrupt-cells = <2>;
 536                         gpio-ranges = <&iomuxc1 0 64 32>;
 537                 };
 538
 539                 gpio3: gpio@40b10000 {
 540                         compatible = "fsl,imx7ulp-gpio";
 541                         reg = <0x40b10000 0x1000 0x400F00c0 0x40>;
 542                         gpio-controller;
 543                         #gpio-cells = <2>;
 544                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 545                         interrupt-controller;
 546                         #interrupt-cells = <2>;
 547                         gpio-ranges = <&iomuxc1 0 96 32>;
 548                 };
 549
 550                 pmc0: pmc0@410a1000 {
 551                         compatible = "fsl,imx7ulp-pmc0";
 552                         reg = <0x410a1000 0x1000>;
 553                 };
 554
 555                 sim: sim@410a3000 {
 556                         compatible = "fsl,imx7ulp-sim", "syscon";
 557                         reg = <0x410a3000 0x1000>;
 558                 };
 559
 560                 qspi1: qspi@410A5000 {
 561                         #address-cells = <1>;
 562                         #size-cells = <0>;
 563                         compatible = "fsl,imx7ulp-qspi";
 564                         reg = <0x410A5000 0x10000>, <0xC0000000 0x10000000>;
 565                         reg-names = "QuadSPI", "QuadSPI-memory";
 566                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 567                         clocks = <&clks IMX7ULP_CLK_DUMMY>,
 568                                  <&clks IMX7ULP_CLK_DUMMY>;
 569                         clock-names = "qspi_en", "qspi";
 570                         status = "disabled";
 571                 };
 572
 573                 gpu: gpu@41800000 {
 574                         compatible = "fsl,imx6q-gpu";
 575                         reg = <0x41800000 0x80000>, <0x41880000 0x80000>,
 576                                 <0x60000000 0x40000000>, <0x0 0x4000000>;
 577                         reg-names = "iobase_3d", "iobase_2d",
 578                                 "phys_baseaddr", "contiguous_mem";
 579                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
 580                                 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 581                         interrupt-names = "irq_3d", "irq_2d";
 582                         clocks = <&clks IMX7ULP_CLK_GPU3D>,
 583                                 <&clks IMX7ULP_CLK_NIC1_DIV>,
 584                                 <&clks IMX7ULP_CLK_GPU_DIV>,
 585                                 <&clks IMX7ULP_CLK_GPU2D>,
 586                                 <&clks IMX7ULP_CLK_NIC1_DIV>,
 587                                 <&clks IMX7ULP_CLK_NIC1_DIV>;
 588                         clock-names = "gpu3d_clk", "gpu3d_shader_clk",
 589                                 "gpu3d_axi_clk", "gpu2d_clk",
 590                                 "gpu2d_shader_clk", "gpu2d_axi_clk";
 591                 };
 592         };
 593
 594   imx_ion {
 595     compatible = "fsl,mxc-ion";
 596     fsl,heap-id = <0>;
 597   };
 598 };