8 prompt "AM33xx board select"
11 config TARGET_AM335X_EVM
12 bool "Support am335x_evm"
13 select BOARD_LATE_INIT
17 select TI_I2C_BOARD_DETECT
21 imply SPL_GPIO_SUPPORT
23 imply SPL_LIBCOMMON_SUPPORT
24 imply SPL_LIBDISK_SUPPORT
25 imply SPL_LIBGENERIC_SUPPORT
27 imply SPL_NAND_SUPPORT
28 imply SPL_POWER_SUPPORT
29 imply SPL_SERIAL_SUPPORT
30 imply SPL_WATCHDOG_SUPPORT
31 imply SPL_YMODEM_SUPPORT
32 imply SPL_SYS_MALLOC_SIMPLE
33 imply SPL_SEPARATE_BSS
35 imply SPL_DM_SEQ_ALIAS
38 This option specifies support for the AM335x
39 GP and HS EVM development platforms. The AM335x
40 GP EVM is a standalone test, development, and
41 evaluation module system that enables developers
42 to write software and develop hardware around
43 an AM335x processor subsystem.
45 config TARGET_AM335X_BALTOS
46 bool "Support am335x_baltos"
47 select BOARD_LATE_INIT
52 config TARGET_AM335X_IGEP003X
53 bool "Support am335x_igep003x"
54 select BOARD_LATE_INIT
59 config TARGET_AM335X_SHC
60 bool "Support am335x based shc board from bosch"
61 select BOARD_LATE_INIT
66 config TARGET_AM335X_SL50
67 bool "Support am335x_sl50"
68 select BOARD_LATE_INIT
74 bool "Support bav335x"
75 select BOARD_LATE_INIT
79 The BAV335x OEM Network Processor integrates all the functions of an
80 embedded network computer in a small, easy to use SODIMM module which
81 incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
82 processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
83 ethernet with simple connection to external connectors.
85 For more information, visit: http://birdland.com/oem
87 config TARGET_CHILIBOARD
88 bool "Grinn chiliBoard"
89 select AM33XX_CHILISOM
90 select BOARD_LATE_INIT
95 bool "Support cm_t335"
101 bool "Support pcm051"
106 config TARGET_PENGWYN
107 bool "Support pengwyn"
113 bool "Support pepper"
124 config TARGET_AM43XX_EVM
125 bool "Support am43xx_evm"
126 select BOARD_LATE_INIT
127 select TI_I2C_BOARD_DETECT
133 imply SPL_ENV_SUPPORT
134 imply SPL_EXT_SUPPORT
135 imply SPL_FAT_SUPPORT
136 imply SPL_GPIO_SUPPORT
137 imply SPL_I2C_SUPPORT
138 imply SPL_LIBCOMMON_SUPPORT
139 imply SPL_LIBDISK_SUPPORT
140 imply SPL_LIBGENERIC_SUPPORT
141 imply SPL_MMC_SUPPORT
142 imply SPL_NAND_SUPPORT
143 imply SPL_POWER_SUPPORT
144 imply SPL_SERIAL_SUPPORT
145 imply SPL_WATCHDOG_SUPPORT
146 imply SPL_YMODEM_SUPPORT
148 This option specifies support for the AM43xx
149 GP and HS EVM development platforms.The AM437x
150 GP EVM is a standalone test, development, and
151 evaluation module system that enables developers
152 to write software and develop hardware around
153 an AM43xx processor subsystem.
157 config ISW_ENTRY_ADDR
158 hex "Address in memory or XIP flash of bootloader entry point"
160 After any reset, the boot ROM on the AM43XX SOC
161 searches the boot media for a valid boot image.
162 For non-XIP devices, the ROM then copies the
163 image into internal memory.
164 For all boot modes, after the ROM processes the
165 boot image it eventually computes the entry
166 point address depending on the device type
167 (secure/non-secure), boot media (xip/non-xip) and
169 default 0x402F4000 if AM43XX
170 default 0x402F0400 if AM33XX
172 config PUB_ROM_DATA_SIZE
173 hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
175 During the device boot, the public ROM uses the top of
176 the public L3 OCMC RAM to store r/w data like stack,
177 heap, globals etc. When the ROM is copying the boot
178 image from the boot media into memory, the image must
179 not spill over into this area. This value can be used
180 during compile time to determine the maximum size of a
181 boot image. Once the ROM transfers control to the boot
182 image, this area is no longer used, and can be reclaimed
183 for run time use by the boot image.