2 * Copyright (C) 2011 Andes Technology Corporation
3 * Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
6 * SPDX-License-Identifier: GPL-2.0+
12 /* Hardware register bases */
15 #define CONFIG_FTAHBC020S_BASE 0x90100000
16 /* Static Memory Controller (SRAM) */
17 #define CONFIG_FTSMC020_BASE 0x90200000
18 /* FTSDMC021 SDRAM Controller */
19 #define CONFIG_FTSDMC021_BASE 0x90300000
21 #define CONFIG_FTDMAC020_BASE 0x90400000
22 /* AHB-to-APB Bridge */
23 #define CONFIG_FTAPBBRG020S_01_BASE 0x90500000
25 #define CONFIG_FTLCDC100_BASE 0x90600000
27 #define CONFIG_RESERVED_01_BASE 0x90700000
29 #define CONFIG_RESERVED_02_BASE 0x90800000
31 #define CONFIG_FTMAC100_BASE 0x90900000
32 /* External USB host */
33 #define CONFIG_EXT_USB_HOST_BASE 0x90A00000
35 #define CONFIG_USB_DEV_BASE 0x90B00000
36 /* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
37 #define CONFIG_EXT_AHBPCIBRG_BASE 0x90C00000
39 #define CONFIG_RESERVED_03_BASE 0x90D00000
40 /* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
41 #define CONFIG_EXT_AHBAPBBRG_BASE 0x90E00000
42 /* External AHB slave1 (LCD) */
43 #define CONFIG_EXT_AHBSLAVE01_BASE 0x90F00000
44 /* External AHB slave2 (FUSBH200) */
45 #define CONFIG_EXT_AHBSLAVE02_BASE 0x92000000
48 #define CONFIG_DEBUG_LED 0x902FFFFC
50 /* APB Device definitions */
52 /* Power Management Unit */
53 #define CONFIG_FTPMU010_BASE 0x98100000
54 /* BT UART 2/IrDA (UART 01 in Linux) */
55 #define CONFIG_FTUART010_01_BASE 0x98300000
57 #define CONFIG_FTTMR010_BASE 0x98400000
59 #define CONFIG_FTWDT010_BASE 0x98500000
61 #define CONFIG_FTRTC010_BASE 0x98600000
63 #define CONFIG_FTGPIO010_BASE 0x98700000
64 /* Interrupt Controller */
65 #define CONFIG_FTINTC010_BASE 0x98800000
67 #define CONFIG_FTIIC010_BASE 0x98A00000
69 #define CONFIG_RESERVED_04_BASE 0x98C00000
70 /* Compat Flash Controller */
71 #define CONFIG_FTCFC010_BASE 0x98D00000
73 #define CONFIG_FTSDC010_BASE 0x98E00000
75 /* Synchronous Serial Port Controller (SSP) I2S/AC97 */
76 #define CONFIG_FTSSP010_02_BASE 0x99400000
77 /* ST UART ? SSP 02 (UART 02 in Linux) */
78 #define CONFIG_FTUART010_02_BASE 0x99600000
80 /* The following address was not defined in Linux */
83 #define CONFIG_FTUART010_03_BASE 0x98200000
84 /* Synchronous Serial Port Controller (SSP) 01 */
85 #define CONFIG_FTSSP010_01_BASE 0x98B00000
87 #define CONFIG_IRDA_BASE 0x98900000
88 /* PWM - Pulse Width Modulator Controller */
89 #define CONFIG_PMW_BASE 0x99100000
91 #endif /* __AG101_H */