1 Technical notes on version 1.39
5 Version 1.39.32 released:
7 kes Take first catalog if gui is set, or if using dotcmd.
8 kes Fix a couple of compiler warnings in wx-console
9 kes Apply the immutable patch for FreeBSD hardlinked files supplied
11 kes Add Volume name to Forward spacing message.
12 kes Update migration job start time (so it is not zero) to prevent
13 immediate recycling of the job. This *should* fix bug #733.
15 ebl Fix runscript configuration parsing bug.
17 kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
18 Remove NLS kludge from baconfig.h. This fixes bug #729.
19 kes Allow seeking on DVD.
20 kes Add additional messages when Job canceled automatically for
21 max run time or max start wait exceeded. This fixes bug #621.
22 kes Update maxruntime-test in regression script to properly test
23 max run time -- from info given in bug #621.
24 kes Simplify automatic cancel code.
25 kes Add check for job_canceled() in FD when contacting SD so that if
26 job is canceled from max runtime, it terminates faster.
28 kes Save and restore volume name in stored/mount.c fixed bug #712
29 where wrong tape was requested in a mount.
30 kes Implement cleaner orphan buffer dumping with buf address.
31 kes Fix orphaned buffer when canceling job waiting on op intervention.
32 kes Update projects file for next vote.
33 kes Implement a fix (more could be done) for bug #728 where a double
34 EOF is writing on the Volume when spooling is enabled and the
35 connection with the FD fails (FD crash, comm error).
36 kes Disable attempting to autolabel when polling and device is not
37 a tape. This fixes bug #730 where polling with a removable disk
38 not mounted caused lots of new Volumes to be created then marked
41 kes Enable VSS by default.
43 Version 1.39.30 released:
45 kes Complete hopefully the last of the copyright transfer changes.
46 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
47 that migration writing to multiple volumes doesn't mess up reading
48 Volumes. This should fix bug #720 -- multivol migration fails.
49 kes Make migration SQL look only for Type='B' jobs to migrate. This should
50 fix bug #724 jobs getting migrated twice.
51 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
52 kes Implement dev->clear_cap() and dev->set_cap() methods.
53 kes Turn off disk seeking on restore for DVDs since I am not 100%
56 kes Implement code that should properly set that a job was migrated,
57 if the migration was successful even if there were no file to
59 kes Apply Richard's patch to fix building or filed/restore.c without
61 kes Ensure that at least one block is written by the SD even if the
62 FD dies or fails -- should fix bug #728.
63 kes Convert stored/record.c ASSERT into a soft fail if the length of
64 a record is too insanely long. This should fix bug #???
66 kes Fix automatic labeling of File volumes, which was broken by new
67 removable device code.
69 kes Remove typedef uLong for HP in baconfig.h. It broke things.
70 lf Fix job byte reporting -- the digest code runs in verify.c and
71 increases this value. The better solution is to digest the
72 stream as we receive it, thus removing the need to re-read
73 from disk at all, but that requires more extensive and
74 potentially destabilizing changes.
75 lf This commit fixes backup and restore of HFS+ resource forks.
76 lf Add a long-missing 'break' statement in HFS+ attribute
77 handling that resulted in restore failures.
79 ebl Fix runscript to always execute command after all job type.
81 Version 1.39.30 released:
83 kes Mark build-depkgs-mingw3 executable in configure process.
84 kes Update autoconf/config.h.in to include LOCALEDIR
85 kes Undefine NLS settings for wxWidgets as there is a conflict with
86 their way of doing things.
87 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
88 kes Change a bunch of ->hdr.name to ->name()
89 kes Straighten out handling of read and write pools for Migration, including
90 getting the code in the proper order.
91 kes Improve migration error messages and debug output.
92 kes Shorten code path in migration if nothing found to do.
93 kes Implement read/write pool in migration job report.
94 kes Move ua_run.c select_job_level code into a subroutine (readability).
95 kes Move ua_run.c display_job_parameters into a subroutine.
96 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
97 restore dependent on a valid catalog containing the Volume name.
99 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
100 make it easier for the user to change.
101 kes Fail any backup job that tries to use encryption and sparse options.
102 Hopefully this is a temporary change.
103 kes Correct the EndJob return string for non-backup jobs.
104 kes Review the encryption restore code.
105 kes Implement a new encryption regression test with compression.
106 kes Modify migrate not to fail if nothing found to migrate.
107 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
108 because they were not always set correctly.
110 kes Update configure.in to include python 2.5 search.
111 kes Back out unwanted migration change reported by Richard Mortimer.
113 kes Make migration with no files to migrate set normal termination.
114 kes Change message when job manually started to say Job queued. ...
115 kes Add job report indication of whether or not VSS and Encryption were
117 kes Modify sparseBlock variable name to make the code clearer.
118 kes Add more sparse tests to regress using gigaslam sparse file
120 kes Enable data encryption code.
121 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
122 only two blocks -- i.e. it is a real sparse file.
124 kes Enable disk seeking on restore.
125 kes Implement the SD 'Block Positioning = yes|no' directive. This
126 allows the user to turn off block level seeking, but restores
128 kes Change the word illegal to read invalid in a few places.
129 kes Fix Win32 build, which broke when I added parse_args_only in
130 lib. I'm not sure I got the entry point right for msvc.
131 kes Turn off data encryption. It can be enabled by defining
132 DATA_ENCRYPTION in src/version.h and recompiling.
133 kes Implement flag to turn off data encryption feature.
134 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
136 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
137 The main problem was that signatures were being generated on blocks
138 of zeros, which is unnecessary.
140 kes Fix scanner (next_arg) to handle leading double quote correctly.
141 kes Modify cd command in restore tree to look at full argument without
142 keywords. This fixes bug #716.
144 kes Do not update Migrated Job type if migration does not terminate
145 normally. This fixes bug #719.
146 kes Update ReleaseNotes
147 kes Purge Job records from the catalog for Migration. This was
148 not properly done previously. This fixes bug #718.
150 kes Initialize msg_type to M_INFO in migration. Pointed out by
152 kes Add some fflush() statements for debug output. This should not
153 really be necessary and defeats buffering but users continue
156 kes More copyright changes.
157 kes Make sure we don't detach from the despool read device since it
158 is a temporary structure where the condition variables are not
159 initialized. Bug #711.
161 kes Add Bacula version+date to Client record. This is a very minor
162 security problem in that passing the version facilitates a hacker's
163 life, but it will make support easier.
164 kes Implement fixes to make disk seeking work. Currently turned
165 off in version.h pending reserch on what problems it will cause
166 because of the previous bsnprinf() sign extension bug.
168 kes Add Landon's refactor of restore Feature request to the
170 kes Tweak debug levels and messages for examining the disk
173 kes Cleanup some of the error termination code in migration.
174 kes Separate read/write source strings to keep track of where
175 storage devices are used in a job.
176 kes Implement a new method of keeping track of which storage
177 device is used in a Job. USTORE keeps both a pointer to the
178 resource and to the source string.
179 kes Modify all code to use new storage set subroutines in job.c
180 kes Modify migrate.c so that the definitive selection of the storage
181 resource is done in the do_migration_init() routine prior to
182 the job going into the job queue. This permits accurate
183 deadlock detection (same read and write storage resource).
184 kes Remove bfill from btape (I think it was a left over stub).
186 kes Make sure that the storage for a job is pulled first from
187 the Pool and if not from the Job.
188 kes Ensure that either the Pool or the Job specifies a Storage
191 kes Start applying new FSFE copyright.
193 kes Add additional error messages in acquiring a drive for read.
194 kes Make WritePartAfterJob the default so that the last DVD part
195 always gets written to the DVD by default.
196 kes Add additional error messages in migration.
197 kes Suppress redundant error messages in migration (possibly more to do).
198 kes Apply Martin's fix (updated to 1.39) that takes into account
199 run storage overrides in the Director status display.
200 kes Implement, but turn off the submitted code that sets the EOT
201 model on FreeBSD machines. Turning on this code is too risky at
202 this point in the development.
204 kes Implement unique dbid routine for migration to prevent the same
205 JobId from being migrated twice. This should fix bug #709.
207 kes Apply Jaime Ventura's 'mail on success' patch.
208 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
209 if memory usage gets too big.
210 kes Tweak migration to ensure that read/write devices are different.
212 kes Create an AUTHORS file to list Bacula contributors.
213 kes Add Richard Stallman's four GPL freedoms to LICENSE
214 kes Require the conf file to have a valid NextPool for writing the
217 ebl Enable RecycleCount in catalog.
218 ebl Fix "echo python | bconsole" segfault
220 kes Implement code to pass the MediaId to the SD. The SD then uses
221 this MediaId when creating JobMedia records. This fixes a bug
222 with Migration where the MediaId got set to the second Volume
223 read rather than the write Volume. Possibly (unlikely) fixes
225 kes Remove NextPool from Job resource.
226 kes Edit a few numbers in the restore dialog with commas.
227 kes Note, the DIR<->SD protocol has changed.
229 kes Replace () by {} in configure.in for proper HP configuration.
230 kes Shorten some lines over 80 characters in filed/backup.c
231 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
233 Version 1.39.28 released:
235 kes Change error message 'illegal' to 'invalid' -- bug #707
236 kes Add rather primitive device resource deadlock detection in
237 the job queue handler. It detects the same read and write device
238 for migration and cancels the job.
239 kes Start adding a unique_dbid_hander() routine in migration to avoid
240 duplicate mediaids and duplicate jobids.
241 kes Add patch from bug #708 to permit relative paths such as ../xxx
242 in the restore tree routine.
243 kes Add Eric Bollengier's patch to reduce locking time in the SD after
244 despooling, and thus many jobs finish faster.
245 kes Correct locking order of reservations lock and device mutex in
246 reserve.c -- this should correct Arno's deadlock that occurred
247 when doing mount/unmount at the same time a job is reserving a
250 rbn Fixed problems with encryption when combined with compression
251 or sparse files. Unfortunately this means that all previous
252 encrypted backups can't be restored.
253 rbn Fixed problem in bfgets with Windows and Mac end of lines.
254 rbn Fixed bug in Windows version of close_bpipe() that cause programs
255 like bsmtp() to hang waiting for the pipe to be closed. Fixed
256 binary file type problems in open_bpipe().
257 rbn Fixed a number of bugs in the mysql DB scripts.
259 ebl Fix broken runscript on director. (RunBefore, RunAfter)
260 ebl Use M_ERROR instead of M_FATAL in runscript.c
262 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
263 rbn Ignore UTF-8 marker at the start of .conf files.
264 rbn Add stab2cv to 3rd party dependencies. This is a utility I
265 wrote that is licensed under the GPL and available on SourceForge.
266 It converts the stab debugging info generated by gcc into Codeview
267 format. Currently it just translates function names to global
268 symbols. This is sufficient to get reasonable stack traces from
269 Dr Watson and to look at minidumps.
270 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
271 rbn Enable Windows XP look and feel for the tray icons and wx-console.
272 rbn Add Windows specific FileSet example to bacula-dir.conf.
273 rbn Reorganize Start menu so that documentation and configuration are
276 rbn Change daemons and utilities so that if -c is omitted from the
277 command line AND there is no configuration file in the current
278 directory then the 'standard' configuration file (eg
279 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
280 doesn't contain any path separators AND there is no configuration
281 file by that name in the current directory then the 'standard'
282 configuration file directory will be searched for a file by that
284 rbn Fixed restore on Windows so that backslashes as path separators works.
285 rbn Add missing query.sql file to Windows installer.
286 rbn Fixed Windows versions of catalog backup scripts.
288 kes Fix optional files in Makefile.in of src/filed that caused
289 a syntax error when using no optional files.
291 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
292 messages; there is no reason to attempt to load a private key.
293 from master key files.
295 Version 1.39.26 released:
297 kes Apply the three patches from Richard Mortimer.
298 bacula-reposition.patch, bacula-tape-reopen.patch, and
299 bacula-eod.patch. This corrects tape positioning on older devices,
300 and also a problem with btape.
301 kes Apply fix from bug report #696 where writing to a FIFO does not
302 work due to a dumb typo.
303 kes Unlock the tape door before the file descriptor is released. This
304 should fix lots of somewhat subtle failures when using an autochanger.
306 kes Correct mtx-changer bug that I introduced in a recent commit, and
307 pointed out by Robert Nelson -- thanks.
308 rbn Fix Windows' daemons so that messages print to stdout if not
309 running as a service.
310 rbn Add daemon name to trace file name (eg bacula-dir.trace).
311 rbn Fix environment variable expansion in directory names on Windows.
312 rbn Fix autochanger support in fill command.
313 rbn Update SQL scripts to match Unix versions.
314 rbn Fix daemon usage displays.
315 rbn Cleanup bacula-dir.conf template.
316 rbn Install openssl.cnf so that the openssl.exe installed in the
317 Bacula\bin directory can be used to generate keys and
318 certificates for TLS and encryption.
319 rbn Fix cleanup of spool files on Windows.
320 rbn Remove /silent option from daemons on Windows. The new default
321 is the same as the old /silent. To enable the message boxes that
322 previously were suppressed by /silent you must add /debug instead.
323 NOTE: As a result of this change, the first time you upgrade from
324 a previous version of 1.39.x you will receive the message
325 boxes when the remove of the old services succeeds. This
326 is the same behaviour as when migrating from a version prior
328 However, going forward, these message boxes will not appear on
329 upgrades or new installs.
330 rbn Add new /debug option. This option enables the message boxes that
331 previously were suppressed by the /silent option. In addition the
332 daemons running as services will open a console window if this
334 rbn Fix bug with service not being removed on migrated installs. This
335 should correct those cases where the file daemon install was failing
336 when upgrading from versions prior to 1.39.x.
339 kes Turn on heap reporting in Dir with zero debug level.
340 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
341 send the same message to stdout.
343 kes Begin work on new GUI "console".
344 kes Make configure look in non-standard MySQL library directory
346 kes Make mtx-changer automatically configure the autochanger wait
347 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
349 kes Correct drop_sqlite_tables.in script to not delete the database.
350 kes When writing to a log file, close and reopen the file descriptor
351 if there is an error writing the file.
352 kes Modify the autochanger loaded?, load, and unload commands to print
353 the full text of any mtx output if there is an error. Helps to
354 ease diagnosis of autochanger problems.
355 kes Correct a few Win32 errno returns in the VSS code so that hopefully
356 a resonable Win32 error message will be printed.
357 kes Convert a few strcat()... to bstrncat() in the Win32 code.
359 rbn Added Windows version of bsmtp.
360 rbn Fixed path search for Windows so that Bacula\bin is automatically
361 searched for programs and scripts.
362 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
365 Version 1.39.24 beta released:
367 rbn Fix restore problem with c:\ prefix bug #676.
368 rbn Verify that drive letter is valid on restore.
369 rbn Fix re-open() options for tape.
370 kes Apply dvd find volume patch from Richard Mortimer.
371 kes Eliminate the dvd specific mount routines using only the
373 kes Make update_free_space a method of DEVICE and rename
376 kes Require a messages command acl to be able to receive messages
378 kes Add console, system, and scan job types in util.c.
380 kes Print the Volume purged message only for real jobs to keep
381 from cluttering up the daemon messages.
382 kes Lock the tape drive door while Bacula is using the device.
383 kes Add back the 'No Jobs running' message to FD and SD status because
384 my regression script depends on it, and I'm too lazy to change the
386 kes Start using structure assignments (not too happy about it ...).
387 kes Fix a bug in the tools Makefile that broke on Solaris.
388 kes Unload any autochanger drive during a 'release' command.
390 kes Enhance error message when restoring without bootstrap file.
391 kes Check restored size only for regular files.
392 kes Store Python job level in job record in Dir.
393 kes Add back code to open tape device nonblocking, but if rewind fails
394 release file descriptor.
395 kes Modify acquire.c to first try autoloading the device. Also, ask operator
396 to mount tape if drive cannot be opened.
397 rbn Made Windows service tray status windows resizable.
398 rbn Fixed horizontal scrolling of text in status window.
399 rbn Preserve horizontal and vertical scroll position while
400 updating. This prevents the display being reset to the
401 top line every 5 seconds.
402 rbn Fix Windows cross-compile compatibilty problems with
403 *nix variants such as OS X without the zic command.
404 rbn Eliminate dependency on man2html.
406 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
408 kes Fix a compiler warning in compat.cpp
409 kes Change strcpy to bstrncpy in compat.cpp
410 kes Remove some broken code in bdb_list.c
411 kes Fix, hopefully the last, ACL problem in the restore command.
412 kes Update the README.mingw32
413 kes Add new version of upgrade-win32-client.txt to examples directory.
414 Submitted by Michel Meyers.
415 kes Print an INFO message in the job report when a Volume is marked Purged.
416 rbn Fixed handling of external program and script execution
417 so that the format of the command line is more flexible.
418 Now executable path names containing spaces are translated
419 to the equivalent short name automatically. The result is
420 passed to cmd.exe with the quotes removed.
422 kes Apply the recycle patch from Richard Mortimer.
423 kes Convert a few if statements in dev.c to switch statements.
424 kes Start using print_errmsg instead of bstrerror().
425 kes Print a job message in SD when a job is marked to be canceled.
427 kes All code added back. Fixed block.c read/write to loop only 3
428 times. This apparently keeps the OS from crashing (at least
430 kes The kernel bug still persists. Backup something then immediately
431 do a bscan on the same tape, and the kernel will crash.
432 kes Simplifed tape open(). It no longer uses nonblocking mode, which
433 means that opening with no tape loaded will probably take at least
434 6 minutes before an error is reported.
435 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
436 when doing set_os_device_parameters.
437 kes Report open error in mount.c
438 kes Remove all .exe files from the installer directory on make clean.
440 kes Start adding back removed code.
441 kes Back out a number of changes because backups to tape crash my
443 kes Remove the inetd code from the File daemon.
445 kes Add -c option to pg_dump so that it initializes tables when
447 kes Fix FirstWritten time on Volume to be obtained from SD so that
448 it is the actual time the volume was first written.
449 kes Minor Makefile changes.
450 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
451 ebl Add yes keyword to prune/purge command
453 kes Correct a test in block.c that prevented restore of a DVD from
454 looking at the last part in the spool directory.
455 kes Make some error messages clearer mostly by using the word DVD
456 in the message. Improve infor message in read_record for DVDs.
457 kes Remove DVD kludges in dircmd.c label/relabel.
458 kes Move the dvd relabel code from dircmd.c into
459 write_new_volume_label_to_dvd() adding a relabel argument.
460 kes Rewrite the truncate_dvd() code to be much simpler and
461 more logical. First blow away any spool part, then create a
462 new empty part and write to the DVD.
463 kes Rewrite the can_write_on_non_blank_dvd() code making it
464 only ensure that no valid data is on the DVD -- i.e. it
467 kes Minor Makefile fixes.
468 kes Put attach_dcr_to_dev in a subroutine.
469 kes Make attaching/detaching to/from a device use a flag and
470 only detach if actually attached.
471 kes Add dvd-simulator.in to scripts directory and add to configure.
472 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
473 This could be a cause of a number of drive reservation problems.
474 Note, this code is now in attach_dcr_to_dev().
475 kes Suppress doing Volume updates if it is a system job. This should
476 prevent the DVD label blocking.
477 kes Clear the freespace ok flag in a couple of strategic places.
479 kes Put removing zero sized spool part file in subroutine and
480 call from release_device().
481 kes Add Richard's patch for relabel to dircmd.c, but save and restore
483 kes Rework a lot of subroutines in dev.c to take dcr as an
484 argument. This is done to eliminate the usage of attached_dcrs
486 kes Change truncated_dvd to blank_dvd, which seems more suitable.
487 kes Apply most of Richard Mortimer's truncate patch.
488 kes Create lseek() method for DEVICE that takes dcr as an
489 argument. This is to eliminate the use of attached_dcrs in
490 lseek(). The calls to lseek_dev() must still be changed.
492 kes Apply Richard Mortimer's patches for printing an error
493 message in btape when a DVD is used, and to initialize traceback.
494 kes Added error message to btape when trying to access a file.
495 kes Move prototype of update_slots() to protos.h.
497 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
498 and FDJobStatus to the Director Python variables.
499 kes Make sure valid argument passed to str_to_utime() where Arno
501 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
502 I.e. part of two different patches.
504 kes Modify disk changer to simulate some of the error conditions
506 kes Make sure the close() call in the SD tools is just before the
508 kes Implement dir_get_volume_info() in bls using the patch from
509 Richard Mortimer but call find_num_dvd_parts().
510 kes Implement find_num_dvd_parts() that mounts and scans a DVD
511 and counts the parts.
512 kes Move the omode code in open_dvd() up so that the cannot
513 write on blank disk can check can be bypassed for read mode.
516 kes Disable normal data spooling for DVD writing which uses
517 a different spooling mechanism.
518 kes Apply patch from Richard Mortimer to ensure that the number
519 of DVD parts is correctly updated.
520 rbn Save installer details log in the Bacula directory as
522 rbn Add installer generation of client and storage templates
523 suitable for @inclusion on the director.
524 rbn Mark previously installed components for Win32 read-only since
525 deselection doesn't do anything.
527 Version 1.39.22 beta released:
529 kes Fix logic error in handling error return from mtx-changer
531 kes Make status from SD aware of -1 (unknown) Slot status.
532 kes At Eric's suggestion make both the 'slots' and 'drive' commands
533 to the Storage daemon work even if the drive is busy.
534 kes Make two separate Win32 menu links for starting bconsole and
535 wx-console in winbacula.nsi
536 kes Apply DVD part_spooled patch from Richard Mortimer
537 richm@oldelvet.org.uk
538 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
539 rbn Fixed problems migrating settings from previous releases in
540 Win32 installer. Add Readme.txt with an option to show it on
541 the installer Finish page.
543 kes Use get_catalog_resource() to open catalog database
544 to ensure that ACLs are respected and that user is
545 correctly prompted for database.
546 kes Integrate multiple console/director patch from
547 Carsten Paeth calle@calle.in-berlin.de
548 ebl Add character substitution in Job/JobDefs WriteBootStrap.
549 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
550 kes Apply patch supplied in bug #656 to pass priority field
551 in the run dialog to the Director in gnome console
552 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
553 this will fix bug #627 where Bacula eventually gets
554 confused about what Volume it wants.
555 kes Add a new close_part() class in the SD to save the device
556 state around open/close_part/open for DVD writing. This
557 should fix the num_dvd_parts getting zeroed as reported by
559 kes Apply patch from Richard Mortimer that correct edit code
560 for debug output of st_size.
561 ebl Add support of encrypted data stream to bscan.
562 display data_len instead of data content (may be binary)
564 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
565 bcopy. Fixes bug #669 reported by Eric.
566 kes Fix incorrect number of arguments in SQL statement in
567 sql_get.c as reported by Eric.
569 kes Update examples directory.
570 kes Remove unused variable in winservice.cpp
571 kes Make Win32 make command build installer.
572 rbn Add new Install Type page, used to select between Automatic
573 and Custom installs. Automatic installs only prompt for
574 configuration items that can't be reasonably defaulted.
575 rbn Added Bacula logo to page headers.
576 rbn Added Upgrade support
577 - Configuration and component selection are migrated from
579 - Configuration of upgraded components is preserved and
581 - Configuration of new components is handled according to
582 the Automatic / Custom selection.
583 - Component selection is defaulted to previously selected
585 rbn Installation of Server components is disabled on
586 Windows 95, 98 and ME.
587 rbn Added URLs for support, info and upgrades to Bacula entry
588 in Add/Remove Programs.
589 rbn Added Version info to Bacula entry in Add/Remove Programs.
591 kes Correct dvd code that breaks tape labeling.
592 kes Implement Enabled on update slots.
594 kes When doing a label, pass the VolBytes back to the Director,
595 which puts it in the catalog.
596 kes Print an error message if the user attempts to prune an
598 kes Need to start using %ld when sscanfing 32 bit values.
600 kes Correct the counting of VolCatBytes for DVDs.
601 kes Add code to mount.c to require that VolCatBytes corresponds to
602 what is actually found when doing an append.
603 kes Update freespace only after writing on the DVD.
604 kes Remove code that blows away the current part in the spool file.
606 kes Apply new dvd-handler patch from Richard Mortimer.
607 kes Tweak so that debug level 20 shows only DVD commands.
608 kes Correct spooled_part flag in dev.c close() so that it is cleared
609 when the spool file is deleted or does not exist.
610 kes Print part number in read_records when eof hit (restore).
611 rbn Installer default changed to start services on new install.
613 kes Make find with no args in tree restore return error rather than
614 stopping the selection. Fixes bug #665
615 kes Rework DVD writing to ensure that the last part is written
616 on open_next_part when dealing with a spool file.
617 kes Correct the lseek_dev() routine to handle end point correctly
618 (bug introduced by me).
619 kes Allow part number to exceed num_dvd_parts in lseek_dev().
620 rbn Change make_session_key on Windows to use WIN32 APIs to produce
622 rbn Add new tool scsilist.exe which displays the changer, tape and
623 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
624 to add them to bacula-sd.conf.
626 kes Apply dvd-handler patch from Richard Mortimer.
627 kes Apply dvd error check patch from Richard Mortimer.
628 kes Apply bpipe race patch from Richard Mortimer.
629 kes Rework how DVD labels are handled and set append only
630 when part > num_dvd_parts.
632 kes Rework many features of DVD writing and reading. Added many error
633 messages. Most importantly changed part to represent the current
634 part number base zero. This makes current DVD writing incompatible
635 with previous version.
637 kes Add host:port to connect failure messages to FD and SD from Dir.
638 kes Add WhereACL to console ACL list. If nothing is specified, only
639 the default is permitted for restore. Otherwise, *all* allows any
640 path, or you can specify permitted paths. This should allow control
641 over where users can restore files. This is untested.
642 kes Modified message to add a ? (as in loaded?) when querying the autochanger
643 for what Slot is loaded.
644 kes Fixed the use of Slot, so that is more correctly maintained, thus
645 eliminating unneeded duplicate calls to determine what Slot is loaded.
647 kes Install man pages with 'make install'
648 kes wx-console crashes because of differences between Bacula and wxWidgets
649 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
651 kes correct improper indenting in wx-console/console_conf.c
652 kes update wx-console header copyrights
653 kes Fix bug #658 where wx-console mangles file/directory names containing
656 kes Add Media.Enabled flag to client backups for dotcmds.c
657 kes Enforce Media.Enabled=1 for a current restore to work.
658 kes Require restore case 3 to have sqlquery permission to work.
659 kes Remove obsolete del_MAC sql command.
660 kes Ensure that bscan creates Volumes with Enabled=1.
662 Version 1.39.20 beta released:
664 kes Correct missing Client table reference in SQL pointed out by
667 kes Fix Win32 build (new entrypoint, start baculafd).
669 kes Add -n option to bconsole to turn off conio.
670 kes Print JobIds to be migrated in Job Report.
671 kes Add additional user supplied notes to the messages part of
672 bacula-dir.conf concerning multiple email addresses.
673 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
674 kes Add more recent Feature requests to Projects file.
676 kes Apply Maritn's fix to src/win32/Makefile.
677 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
678 kes Implement pruning for Migration and migrated jobs.
679 kes Implement PoolOccupancy migration.
680 kes Implement PoolTime migration.
682 kes If doing a mount, look for a slot, and if specified pass it to
683 the SD so that it can load the autochanger.
684 kes Return DVD=1 flag if a label command is done to a DVD. This
685 permits setting VolParts to 1.
686 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
687 rework ua_label code based on DVD media type to use DVD flag returned.
689 kes Eliminate some compile warnings in dird_conf.c
690 kes Format the bytes field in the terminated jobs part of the status
691 command for the three daemons with suffixes to reduce print size
692 of backup bytes. Suggested by a user.
693 kes When not descending into a directory, print the File= name that
694 triggered it -- makes why not descending a bit clearer.
695 kes Do not unload autochanger when doing a list command -- basic code
696 from Eric Bollengier.
698 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
699 to build-depkgs-mingw32. It now handles two options -h to display
700 help and -C to reextract the source and apply the patches. The -C
701 option is useful for updating the source after new patches are
703 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
704 This allows updating to new versions without having to modify the
705 script and makes it easier to figure out which packages and which
707 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
708 as build-depkgs-mingw32 except they are built using Microsoft Visual C
709 and placed in the depkgs-msvc directory. There is also an
710 External-msvc file to describe the packages.
712 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
714 kes Fix bug #462 incorrect error message printed when client script called
715 from File= was not found.
716 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
717 do a rewind on Solaris when no tape is in the drive (Solaris does not
718 have the detailed errno found on Linux). Added Solaris specific code.
719 Note, this may apply to other OSes as well.
721 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
722 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
723 fix bug 648 - update sqlite script patches, lock out gnome2console
724 builds for platforms with gtk+ < 2.4.
725 Updated build_rpm.sh - add remote source directory, add switch for
726 signing, refine file names.
727 Updated spec file again for Mandriva build as they have this curious
728 custom of silently converting all manpages to bzip2 format just before
729 the final packaging step.
731 rbn Fixed the Windows Makefiles so that they won't accidentally try and
732 pickup binaries for the Unix build. This allows both the Unix
733 build and the Windows build to be built in the same tree without
734 interfering with each other.
735 rbn Fixed error handling and cleaned up mtx-changer.cmd.
736 rbn Added the rest of the database scripts. These are installed but are
737 not yet edited for variable replacement.
738 rbn Broke out the cats functionality from bacula.dll and put into new
739 separate dlls for each database type. At installation time the
740 correct one is copied to bacula_cats.dll.
741 rbn Eliminate the need to install the mysql.dll on client only builds.
742 rbn Moved dird/sql_cmds.c into the cats directory so all the database
743 specific #ifdefs were in the cats directory.
744 rbn Added a new sql_cmds.h with all the declarations for the variables
745 exported from sql_cmds.c.
746 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
747 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
749 kes Correct improperly formatted list command output reported by Dan.
751 kes Correct despool time calculation.
753 kes Remove previous changes to compat.cpp as they create problems.
754 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
755 kes Attempt to fix problems with the msg_queue crashing on Solaris
756 when Bacula is terminating, but problems remain.
757 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
758 name editing problems with too many \\?\es.
759 kes Fix some Bacula source code style problems in compat.cpp.
760 kes Add debug code to compat.cpp and convert non-Bacula debug code
763 kes Change the name of the technical notes file from kes-1.39 to
764 technotes-1.39. Prefix my messages with 'kes '.
765 kes Allow dequeue_messages() to be called twice. Should fix bug
767 kes Add Job type to bscan Job information output.
769 kes Update copyright date in program files, and for the most part
771 kes Implement %q in bsnprintf.c apparently I forgot it.
773 kes Make disk-changer sed command compatible with FreeBSD.
774 kes Make a first cut at a ReleaseNotes and ChangeLog for a
776 kes Make make clean descend into the src/win32 directory.
777 kes Fix some #ifdefing so that Solaris and FreeBSD compile
778 sys/stat.h was turned off.
779 kes Use suffix editing for new transfer rate messages.
780 kes Attempt to come up with a workaround which seems to be an OS
781 bug where write() returns EBUSY. IMO this should not happen.
782 It triggered in truncatebug test. The workaround retries using
784 kes Eliminate a strerror() call in a class method that failed with
786 kes Use rm -rf rather than rmdir to delete the src/win32/release
787 directory during make clean.
789 kes Make bscan ignore ACL streams.
790 kes Update projects files with new Feature Requests.
791 kes Generate current English and French manuals and upload
793 kes Update the home page to include the new British/French flags to
794 switch between translations. Work done by Alexandre Baron.
795 kes Make disk-changer script print an error message if the changer
796 directory is not defined.
797 kes Create a generic DB routine for getting an int (32/64 bit) from
799 kes Add more migration code.
800 kes Add a few more files to .cvsignore here and there.
801 kes Minor fixes for SD write rate and despooling rate.
802 kes Turn off new test code in src/console.c
806 kes Incremented the version number to signify that all of Robert's code
807 for Win32 that was in the branch is now integrated into the HEAD,
808 and that Eric has submitted code that we hope will provide limited
809 backward compatibility with 1.38 file daemons (more testing to be
811 kes I rationalized a few of the names of the variables (mainly jcr names)
812 that are used during migration as keeping three different jcrs at the
813 same time clear in ones head is not easy.
817 eb Tweak new runscript feature to work with 1.38.x FDs.
818 eb Correct crypto.c to fix segfault when restoring an encrypted stream
819 on fd which don't use rsa keys.
820 eb Add yes/no English keywords on localized yes/no questions.
822 kes Several important commits from Robert Nelson for code cleanup and
824 kes Modify console.c so that when conio is enabled, it converts \n to
825 \n\r before outputting to the console. Hopefully this will fix
826 the problems with expect in Perl that Eric saw.
828 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
830 kes Add Comment field to llist of a volume.
831 kes Allow true/false in some yes/no questions.
832 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
833 kes Remove a few /n's when scanning commands from another daemon. This
834 permits adding additional fields later.
835 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
836 kes Update README.mingw
838 kes Tweak authentication to work with 1.38.x FDs.
839 kes Tweak catalog make scripts.
840 kes Fix catalog upgrade scripts so that they work.
841 kes Correct despooling debug code to eliminate race condition.
843 kes Add additional fields as specified by Arno to LocationLog.
844 kes Add comment field to the Media record.
845 kes Add Time field to the Log record.
846 kes Correct migration SQL (thanks to Bill Moran) so that it
847 runs with PostgreSQL also.
848 kes Add spooling/despooling info in status output of SD.
850 kes Spend a lot of time integrating mkcdrec with the rescue disk.
851 kes Add VOLMGMT message class for volume management messages (none yet).
852 kes Add CATALOG as a destination. It goes into the LOG table.
853 kes Implement the Log table in the DB.
854 kes Implement the Location Log table in the DB (for user use).
855 kes At Eric's request add a run_scripts() just after blast_data in
858 kes Add Enabled column to Location, correct some typos in DB schemas.
859 kes Correct bug I introduced into RunScripts enum.
860 kes Add log table to Catalog
861 kes Purge original job migrated if the migration terminates normally.
862 kes Cleanup purging of files/jobs so that it is done only in a
864 kes Add new VOLMGMT message class.
865 kes Add Catalog message destination (user conf code remains to be written).
867 kes Modify read_record and friends to properly deal with migration
869 kes Update debug code in read_record.
871 ======================= Warning ==========================
872 Separate read and write storage in Jobs in the Director. This
873 is a major rewrite of some of the low level code and hence has
874 a high probability of introducing bugs.
875 ==========================================================
877 kes Move the job init code up to *before* the job is put into
878 the job queue (resource allocation queue). This permits the
879 job to establish whether it will read or write or do both.
880 kes Add name() methods to all the resource classes.
881 kes Implement separate read and write storage resource
882 allocation/deallocation in jobq.c
884 ======================= Warning ==========================
885 Implemented new method of getting the default Storage from the Media
886 record rather than from the MediaType for restore. As a fall
887 back, if no Storage is defined, use the MediaType. This
888 eliminates most all prompts if there are multiple MediaTypes
889 used. This is an important and fundamental change.
890 ==========================================================
892 kes Add more detail (Storage, Device) to list of volumes printed
894 kes More code in migrate. In particular start multiple jobs if
896 kes Probably overkill, but ensure that the bsr is unique even within a
898 kes Rework bsys.c drop() so that it now should work as expected.
899 kes Update a bunch of old copyrights -kes particularly in .h files.
900 kes Remove src/lib/bshm.c/h
904 ======================= Warning ==========================
905 All hash codes in the database are now kept in world
906 compatible base64 format (no = filling). This means that
907 all FileSets will be updated and if you are running
908 verify jobs, you must do an InitCatalog.
909 Authentication uses the new algorithm, but should be
910 backward compatible with 1.38.x
911 ===========================================================
913 kes Modify the authentication routines so that the 1.39.15 Director
914 always runs with the compatible binary to base64 code (same as
915 the rest of the world). It will however detect if an SD or
916 FD is running the old code and if that is the case, will use
917 the old algorithm for authentication. However, all consoles must
918 use the compatible algorithm, and all data entered into the database
919 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
920 use the compatible algorithm.
921 kes Rename the cram_md5 routine names to be slightly more appropriate
922 to what they are doing (challenge and respond).
923 kes Robert committed his #ifdef and header cleanup.
925 kes Fix a compiler warning in files/backup.c
926 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
928 kes Robert committed his low impact changes.
929 kes I removed a size_t from the jcr.h definition.
930 kes Update the tape regression scripts (still to be tested).
931 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
932 kes Require done or quit to exit from in memory tree restore.
934 kes Write install/uninstall of new manpages. There are now a
935 pile of man pages. Some of which need a lot of work.
937 ======================= Warning ==========================
938 The --mandir ./configure option now points to the top level
939 man directory. The man files will be installed under
940 mandir/man8 and mandir/man1 as appropriate.
941 ==========================================================
943 kes Add complete text of GPL to LICENSE.
944 kes Implement job report that indicates where Storage and Pool
945 came from -kes with overrides and Pool storage and NextPool,
946 it is all very complicated.
947 kes Create a few common subroutines for backup.c and migrate.c
948 kes Eliminate warning messages from tray-monitor.c
950 kes Apply fix for scheduler for missing unlock_jobs().
951 kes Clean out autoconf caches before rebuilding configure
952 kes Fix the FreeBSD pthreads lib define updated by Dan.
953 kes Add missing semicolon in src/console/console.c
954 kes Add Robert's enhanced version of build-win32-cross-tools
955 as well as his patch file.
956 kes Note, the new gcc options are likely to break building of
957 wx-console or the tray-monitor ...
959 kes Implement Robert's suggestion to suppress printing compile lines.
960 kes Detect GCC correctly (I hope)
961 kes If using GCC (actually g++) add the following compiler flags
962 -fno-strict-aliasing -fno-exceptions -fno-rtti
964 ===================== Warning =============================
965 Turn on new bsnprintf() code. This could cause print output
967 ===========================================================
969 kes Fix crypto when not using openssl. I previously overlooked this.
970 kes Eliminate crypto type punning problems by eliminating void * and
971 using uint8_t * instead.
972 kes Harden authentication failure in FD by single threading errors
973 and forcing a 6 second wait.
975 ===================== Warning =============================
976 Removed 'Accept Any Volume' directive.
977 ===========================================================
979 kes Major cleanup and simplification of regress using shell functions
980 (more tests to be converted to new format)
981 kes Add detection of 64 bit Irix as indicated by user.
982 kes Increment catalog database id from 9 to 10.
983 kes Add a few of the new database fields to the various C++
985 kes Implement code to fill in the most important new fields (e.g.
987 kes Ensure that most of the new fields are in create/get/insert/update.
988 More work to be done.
990 kes Update some very old licenses in src/cats.
991 kes Modify the database format for handling Migration jobs:
992 Add PriorJobId, RealEndTime to Job table
994 Remove Stripe from JobMedia record (not used, wasting space)
995 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
996 Add Cost to Location table.
997 kes Delete mac_record subroutines.
998 kes Add new table values to create/update/get routines as appropriate.
999 kes Update the update_tables and make_tables scripts.
1000 kes Make a first cut in using a union where multiple pointers (actually
1001 pointers to pointers) are stored.
1002 kes Make some changes to base64.c suggested by Robert and others and add
1003 a small amount of documentation.
1004 kes Add some changes suggested by Peter for Solaris (bregex...)
1005 kes Make runscript.h always built because it needs to be pulled into
1006 more places. In particular its RES was left out of a union.
1007 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
1008 This makes it slightly easier to detect uninitialized variables.
1010 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
1011 sometimes creates install problems.
1012 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
1013 Nelson's code. More to do.
1014 kes Convert a few store_bit to store_bool in filed_conf.c.
1015 kes DVD tweak to block.c as supplied by Uwe Muessel.
1017 kes Modify configure.in to check for typeof().
1018 kes In findlib/attribs.c use typeof instead of templates if possible.
1020 kes Implement partial error messages for src/filed/acl.c
1021 kes Fix return code to fail when doing update barcodes and
1022 Pool resource is not found. This previously caused Volumes
1023 to be labeled as cleaning tapes.
1024 kes Small updates to projects.
1026 kes Add Eric Bollengier patch for new RunScript directive. It breaks
1027 compatibility between dird and fd.
1029 kes Prevent DVD code from rewriting label if the device cannot be
1031 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1032 fix Debian build bug.
1033 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1034 kes Integrate manpages contributed by Jose Luis.
1035 kes Update projects file.
1036 kes Add manpages Makefile.in to configure.in
1037 kes Remove installation of bacula.8 in scripts directory.
1039 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1041 O_NOATIME is a open() flag which makes it possible to read a file without
1042 updating the inode atime (and also without the inode ctime update which
1043 happens if you try to set the atime back to its previous value). It also
1044 prevents a race condition when two programs are reading the same file, but
1045 only one does not want to change the atime. It's most useful for backup
1046 programs and file integrity checkers (and bacula can fit on both
1049 Recent versions of the Linux kernel and glibc have support for it (the
1050 glibc support being mostly copying the O_NOATIME definition to
1051 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1052 it does nothing (since the kernel ignores unknown flags).
1054 If the kernel has support for it, trying to use it either works, fails
1055 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1056 are not either the owner of the file or root). A simple way to prevent the
1057 failure is to open the file without the flag and set it later with
1058 fcntl(F_SETFL), ignoring any EPERM errors.
1059 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1060 of restarted jobs to complete (due to a destroyed pthreads conditional
1061 variable used by the message thread).
1062 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1064 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1065 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1066 colons in query.sql file.
1067 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1068 not to create orphans.
1069 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1070 in restore long listing.
1071 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1072 of incorrect MarkedId.
1073 kes Apply patch from adioso bug #616 to correct text in manual (replace
1074 Director with File daemon).
1075 kes Rework a few of the zlib changes so that they build properly.
1078 kes Move DIR 'run' command to SD before starting the message thread
1079 as suggested by Cristopher Hull to avoid a race deadlock from
1080 two threads using the bsock structure.
1081 kes Modify LICENSE to correct some problems pointed out by Debian.
1083 kes Correct EOF with no \n lex.c problem.
1084 kes Tweak compat.h compat.cpp and merge with apcupsd
1085 kes Add additional INFO messages if autochanger cannot be used.
1088 kes Simplify Win32 Makefile
1089 kes Correct count of buffers/bytes used by smartall.c
1090 kes Updated compat.h after porting apcupsd to MinGW.
1092 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1093 started adding Makefile ...
1094 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1096 kes Reloading a bad configuration file doesn't kill director any more.
1097 Thanks to fix from Eric Bollengier.
1099 kes Fix problem of accents with new Win32 code.
1100 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1101 works in the MinGW build with the exception that there
1102 is a problem with accented characters -kes i.e. there is
1103 some mapping problem with wide characters.
1104 kes The code no longer compiles with Microsoft VC++.
1106 kes Start implementing Christopher's St.Bernard code.
1107 kes Add Christopher's mods for opening files.
1108 kes Strip \r \n from Win32 error messages (Christopher)
1109 kes Add more info about Win32 system if unknown (Christopher)
1110 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1111 kes Fix a number of incorrect strings marked for translation, when
1112 they should not be (e.g. commands).
1113 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1114 Patches supplied by user in bugs #608 and #599.
1115 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1116 listing. This fixes some problems with Win32 printing incorrect
1118 kes Correct the clock shift comm time calculation between the DIR
1119 and the FD. It was added rather than subtracted.
1120 kes Strip all backslashes in filenames to be restored on Win32
1121 machines -kes the names should all be in Unix format, and if
1122 there are any backslashes it is most likely due to an improper
1123 FileSet definition, and the files will not otherwise be
1125 kes Remove lib/regex.c (replaced by bregex.c).
1126 kes Delete src/win32/License.txt
1127 kes Modify installer to install LICENSE
1129 kes Fix bug in build-win32-cross-tools script reported by Howard
1130 kes Implement cross compiled bconsole
1132 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1133 kes Write first cut of README.mingw32
1134 kes Add back ua_label barcode fix from Rufolf Cejka.
1135 kes Integrate the majority of the Mingw cross-tools submission
1136 made by Howard Thomson. Everything compiles, with zlib, openssl,
1137 and VSS turned off. Linking needs a pthreads library ...
1139 kes Add 'Dir Status' button to the gnome console.
1140 kes More work on migration.
1141 kes Restore non-compatible base64 coding to permit compatibility.
1142 kes Display heap stats in Storage daemon without debug level.
1144 kes Integrate most of the MinGW changes -kes more to do.
1146 kes Implement using pg_config for finding PostgreSQL files.
1147 Fixes bug #600. Patch supplied by user.
1148 kes Remove -t option from mktemp in mtx_changer.in and use
1149 working directory. Fixes bug #578.
1150 kes Update job start time after the any run before job so that
1151 files created by the script are only backed up once. Fixes
1153 kes Strip trailing newline only from filenames entered in
1154 the restore command when reading a file. This permits
1155 the user to enter filenames with trailing spaces. Fixes
1156 bug #549. The user supplied a patch that I modified slightly.
1157 kes Use the most recent time (st_mtime, st_ctime) in the dir
1158 command in restore. This gives the user a better idea of what
1159 the newest file really is. This fixes bug #574. The fix
1160 was suggested by the user.
1161 kes Implement a compatible version of base64. This permits external
1162 programs to duplicate Bacula's base64 algorithm using standard
1163 routines. This fixes bugs #296, and 565. Patch submitted by
1165 ================= Note ========================
1166 Previous Signatures stored in the database are no longer
1167 compatible with this. The main downside is for Verify jobs,
1168 and doing an InitCatalog run will fix the problem. Also, the
1169 authentication between the deamons is changed, so all daemons
1170 must be simultaneously upgraded.
1171 ==============================================
1172 If you don't like this fix, set:
1173 const bool compatible = true;
1175 const bool compatible = false;
1178 kes Ensure that DB signature is never NULL.
1179 kes Ensure that DB table names are not translated.
1180 kes Fix scheduler to handle time skew (eg daylight savings).
1181 kes Fix scheduler to use lock_jobs() to avoid most problems
1182 with reload. Window is now milliseconds.
1184 kes Apply patch from Christopher Hull
1185 kes Allow multiple connections to database with different
1187 kes Invalidate the scheduler when doing a reload. Fixes seg
1188 fault, but still 60 second window.
1189 kes Additional info in Reschedule message.
1190 kes Use set_jcr_job_status() everywhere to prevent loss of
1192 kes Display peer IP in FD if error from connecting DIR.
1193 kes Don't increment file count for DIRBEGIN.
1194 kes Replace illegal characters in Win32 filename by _.
1195 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1196 kes Hash hard link filenames rather than linked list.
1197 kes Fix for security failure in chdir on Win32.
1198 kes Add CreateDirectoryA/W win32 API entry points.
1199 kes Add /silent option to Win32 FD for Install/Remove service.
1200 kes Always print Heap statistics in FD.
1202 kes Remove the -f option from the chown in Makefile.in for more
1204 kes Change setting the group in Makefile.in to use chgrp for
1206 kes Implement a write_store and read_store to replace
1207 dirstore in reserve.c
1208 kes Implement a Bacula read/write lock for Python rather
1209 than using the Python lock to avoid recursive problems.
1210 kes Correct the uninstall directory names in filed/Makefile.in
1211 as reported by a user.
1213 kes Correct some problems with database creation (new tables).
1214 kes Replace a bunch of old 0x%x by %p.
1215 kes Get first cut of Migration with Job selection working.
1217 kes Change store_bit() to store_bool() for the Spooling in
1218 dird_conf.c -kes bug reported by Robert Nelson.
1220 kes Correct Makefile bug found by Dan Langille.
1222 kes Correct Makefile for Solaris /bin/sh
1223 kes Correct mtx-changer.in for Solaris /bin/sh
1224 kes Abort if a conf resource does not have a Name =
1226 kes Change the name of the regex program to bregex.
1227 kes Add the bwild program to the tools directory. It is similar
1228 to the bregex program.
1229 kes Implement create bregex.h and bregex.c in src/lib from the
1230 Python regexp program.
1231 kes Use the new bregex.c to implement Regex expressions on Win32.
1233 kes More work on migration.
1234 kes Implement wild program in tools directory for testing
1235 wild-cards. Almost identical to the regex program.
1236 kes Up port VSS single thread locking code.
1237 kes Replace N_(..) by NT_(...) to inhibit translation of
1239 kes Modify Makefile to change the permissions on Working Directory
1240 to 770 if the directory is created.
1241 kes Do not fail the Makefile if changing the permissions or
1242 owner/group on WorkingDir fails.
1243 kes Remove early selection of Scratch Volumes in the recycling
1245 kes Correct the old recycling algorithm so that Scratch Volumes
1246 are selected when looking for a Volume in the changer.
1247 kes Correct a typo in the Verify SQL reported by Joe Park.
1249 kes Remove automatic case folding on Windows FDs. You must
1250 explictly use the 'Ignore Case = yes' option.
1251 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1252 scratch volume in an Autochanger early in the 'recycling'
1255 kes Make weof() and clrerror() methods of class DEVICE.
1257 kes Tweak license to include Microsoft restrictions.
1258 kes Move mysql.reconnect to after real_connect(). Thanks to
1259 Frank Sweetser for the patch.
1260 kes Disallow a backslash in a File = directive (Windows junk)
1261 unless the string is quoted.
1262 kes Apply Eric's patch to ua_label.c so that daemon protocol
1264 kes Add NT_ definition for strings that should not be translated.
1265 kes Apply NT_() to ua_label.c
1266 kes Remove timed wait for VSS on Win2K3 as it is not yet
1268 kes Correct bacula.in script to reference bacula-ctl-xx in the
1269 sysconfig directory rather than the bin directory.
1271 kes Fix a long standing bug in the bacula start/stop scripts.
1272 kes Attempt to add the new bacula-ctl-* files to the rpm.
1273 kes Switch to using typeof() for list traversing to avoid
1274 as many FC5 g++ compiler warnings as possible.
1276 kes Split the bacula start/start script into four files:
1277 bacula -kes starts and stops calling other scripts
1278 bacula-ctl-dir -kes starts/stops the director
1279 bacula-ctl-fd -kes starts/stops the File daemon
1280 bacula-ctl-sd -kes starts/stops the Storage daemon
1282 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1283 kes Correct editing of JobId from int to int64 in fd_cmds.c
1284 kes Eliminate FileSet name race with bash_spaces() and multiple
1285 threads by bashing in a local.
1286 kes Fix error return from 'use storage' to print a correct error
1287 message rather than nothing.
1288 kes Correct false re-read last block error message when two jobs
1289 are simultaneously writing at the end of a tape.
1290 kes Simplify exit conditions in the reserve.c code to avoid
1291 possible non-release of reservation_lock().
1292 kes Suffle lock order in reserve to avoid deadlock between
1293 reservation lock and device mutex.
1295 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1296 tracking this down for me !!!! as it broke the Win32 build.
1298 kes Integrate addition of line count limitation to bsmtp -l from
1299 Sebastian Stark <stark at tuebingen.mpg.de>
1301 kes Implement regex test program in tools directory.
1302 kes Attempt to fix time problem with bsmtp with foreign langs.
1303 kes Add strip_trailing_newline() submitted by user.
1304 kes Implement regex matching in migrate.c
1306 kes Fix bug #537 to allow arbitrary time to mount a volume for
1307 restore, if polling is turned on.
1308 kes If dir_user or dir-group is specified in ./configure apply it to
1309 the working-dir. Fixes bug #533.
1310 kes If rescheduling a job cancel the previous incarnation with the SD.
1311 Fixes bugs #566 and 557.
1312 kes Fix bug #567 do_message() definition type conflict.
1315 kes Add more jcr methods and make mutex and use_count private.
1316 kes Create lock/unlock methods for jcr.
1317 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1318 records to get to seek position.
1319 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1320 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1321 terminates correctly by doing pthread_kill(). Do not destroy
1322 SD cond wait variable between executions of the job. Use local
1323 mutex for cond variable to avoid blocking jcr chain. Fix poor
1324 use of jcr use count in jobq.c for restarted jobs.
1325 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1326 lib/jcr.c -kes prevents locking the jcr chaing.
1327 kes Apply patch from bug #564, which corrects listing volumes with
1328 multiple autochangers. Apply same fix to next volume list.
1329 kes Fix bug #562 where restore bootstrap file is not unique.
1330 kes More details in implementing David's migration syntax proposal.
1331 kes Save and restore dcr when swapping drives so that if we have
1332 a write dcr it is not lost.
1333 kes Use new routine lock_reservations() to lock the reservations
1334 system, and call it while looking for a volume in askdir.c.
1335 This could possibly fix bug #543.
1336 kes Stop SD command loop if job is canceled.
1339 kes Remove old code from findlib/create_file.c
1340 kes Rename mac.c migrate.c
1341 kes Add user friendly display of VolBytes in job report.
1342 kes Rename target... to previous... to make it a bit easier to
1344 kes Add selection type and selection pattern to Migration (idea
1345 given by David Boyes).
1348 kes The po files should now be current.
1349 kes Fix new sql_use_result() code to properly release the
1350 buffers in all cases.
1351 kes Use the keyword ujobid to mean the unique job id; job or jobname
1352 to mean the Job name given on the Name directive, and jobid to
1353 be the numeric (non-unique) job id.
1354 kes Allow listing by any of the above.
1355 kes Add the user friendly job report code for reporting job elapsed time
1356 and rates with suffexes from John Kodis <kodis at comcast.net>.
1357 kes Add Priority and JobLevel as Python settable items.
1358 kes Use TEMPORARY table creation where the table is created by
1360 kes Add new code submitted by Eric for waiting on specific jobid.
1361 kes Add ACL checking for the dot commands.
1362 kes Fix restore of writable FIFOs.
1363 kes Fix a bug in bpipe where the string was freed too early.
1365 kes Modify the Python class examples to inherit object -kes new way
1366 of defining classes. Patch from Felix Schwarz.
1367 kes Implement jobuid to replace old usage of job in keywords as
1368 suggested by Eric Bollengier.
1369 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1370 wait (wait for all jobs to stop)
1372 wait jobuid=unique id
1374 kes Implement write variables for Python to set Priority (anytime), and
1375 Job Level, only during JobInit event.
1377 kes Fix the block listing bug pointed out by Arno.
1378 kes Update the po files at Eric's request.
1380 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1381 accept time qualifiers.
1382 kes Make catalog respect ACL.
1383 kes Add recycle count to Media record.
1385 Changes to 1.39.6-beta1 24Feb04
1387 kes Add Rudolf Cejka's new rc-chio-changer.
1388 kes Implement pulling Volume from Scratch Pool if the
1389 Volume is in the autochanger.
1390 kes Implement additional command arguments for update Volume.
1394 kes Back port changes to 1.38.5
1395 kes Fix recycle SQL for StorageId.
1396 kes Fix misplaced quote in mtx-changer script.
1398 kes Note. Your database must be updated, or you must create
1399 a new database. I have not yet incremented the database level.
1400 kes Add Location table.
1401 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1403 kes Implement create/get mac record in database for adding extended
1404 Migration data to the job record.
1405 kes Add new MAC table to update/make database scripts.
1406 kes Return Storage name used when getting VolumeNames for a job.
1407 kes Change bsr file keyword Storage to Device, which is more accurate.
1408 kes Ensure that Mac records are pruned/purged.
1409 kes Tweak SD tools to deal with changing media type.
1410 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1411 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1412 that the subroutine can switch devices, and hence dcrs.
1413 kes Modify the multiple MediaType read code to re-use the same
1414 dcr when switching devices. This makes the code much more
1416 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1417 from a table for restore.
1418 kes Add Storage name to VolParams, but it really should be Device.
1420 kes Add disk-changer to scripts directory + configure/Makefile
1421 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1422 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1423 kes Implement new store_bool that stores in a bool.
1424 kes Add true/false to yes/no conf directives.
1425 kes Make first cut at changing appropriate store_yesno to store_bool.
1426 kes Complete implementation of Pool storage devices.
1427 kes Move starting clones to job.c
1428 kes Move create_restore_bootstrap_file() to job.c
1429 kes Make copy_storage() more general to be able to handle
1431 kes Cleanup a lot of migration code for manual running, including
1433 kes Move getting a scratch Volume into a subroutine.
1434 kes Make all places a Volume that is added to a pool to
1436 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1437 kes Fix segfault in restore command when no value specified.
1438 kes Start adding code to handle multiple MediaTypes in restore.
1439 kes Eliminate race condition in getting Volume name for
1440 two drive autochanger.
1441 kes More debug code in autochanger.
1442 kes Add storage keyword to bootstrap file, add parsing.
1443 kes Move slot in bsr file into Volume record as there will be
1444 a different slot for each Volume.
1445 kes Create reserve.h
1447 kes Implement Pool storage overrides.
1449 kes Implement first cut of Migration.
1450 kes Implement mysql_use_result() from patch by Karl Hakimian.
1451 This reduces significantly the memory consumption during
1452 the restore tree building, and hence runs faster too.
1453 kes Implement StorageId patch supplied by user (reggie) in bug
1454 #536. This should permit Bacula to work correctly with two
1456 kes Implement Job listing variations suggested by a user.
1457 kes Move updating bootstrap code in backup.c to subroutine
1458 update_bootstrap_file().
1459 kes Add new job status elapsed time and bytes written user
1460 friendly job report output patch sent by John Kodis
1461 <kodis at comcast.ne>.
1462 kes Implement a storage list in Pools.
1463 kes Separate out setup_job() code from run_job().
1464 kes Get migration working -kes lots of changes in mac.c in both
1466 kes Apply patch from user (Eric Bollengier I think) that fixes a
1467 DIR crash when no arguments are supplied to a dot command.
1468 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1469 kes Fix command arg name->volume in label command of gnome-console.
1470 kes Fix SD acquire.c to release correct DCR by explicitly testing
1471 on the dcr address rather than trying to devine if it is a read
1472 or write dcr. This failed in error conditions when the device was
1476 kes Apply user supplied patch for more readable rate output
1478 kes Continue implementing migration.
1479 kes Implement support for removable filesystems in SD.
1480 kes Ensure that btraceback scripts can be read by anyone.
1481 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1482 kes Correct bug where canceling restore before the FD contacts
1483 the SD causes the drive to be left in read mode.
1484 kes Move ofline_or_rewind into DEVICE::close().
1485 kes Eliminate close_device.
1486 kes Convert several dev subroutines to methods (e.g. bsf,
1488 kes Eliminate force_close_device().
1489 kes Implement Device Type directive in Device resource that
1490 can have values File, Tape, Fifo, DVD, or Prog.
1491 kes Add has_cap() method to Device.
1494 kes Add patch from bug #527 to allow RedHat user to specify
1495 options/user/group for starting each daemon in
1496 /etc/sysconf/bacula.
1498 kes Add two new queries to query.sql provided by Arno. One
1499 list volumes known to the Storage device, and the other
1500 lists volumes possibly needing replacement (error, ...).
1502 kes Add periodic (every 24 hours) garbage collection of memory
1503 pool by releasing free buffers.
1505 kes Correct bug counting sized (for display only) in smartall.c
1506 kes Print FD mempool stats if debug > 0 rather than 5.
1508 kes Make db_lock() mutex error fail the job rather than abort
1509 Bacula. Canceling the job caused the mutex to fail.
1510 kes Correct bug in alist.c that re-allocated the list if the
1511 number of items goes to zero.
1512 kes Move the reservation system thread locking to the top level
1513 so that one job at a time tries all possible drives before
1515 kes Implement a reservation 'fail' message queue that is built
1516 and destroyed on each pass through the reservation system.
1517 These messages are displayed in a 'Jobs waiting to reserve
1518 a drive' list during a 'status storage='. Note, multiple
1519 messages will generally print for each JobId because they
1520 represent the different problems with either the same drive
1521 or different drives. If this output proves too confusing
1522 of voluminous, I will display it only when debug level 1
1523 or greater is enabled in the SD.
1525 kes Add enable/disable job=<job-name>. This command prevents
1526 the specified job from being scheduled. Even when disabled,
1527 the job can be manually started from the console.
1528 kes During 'update slots' clear all InChanger flags where the
1529 StorageId is zero (old Media records).
1531 Beta release 1.38.4:
1533 kes Fix autochanger code to strip leading spaces from returned
1534 slots number. Remove bc from chio-changer.
1535 kes Back port a bit of 1.39 crypto code to reduce diffs.
1536 kes Fix first call to autochanger that missed close()ing the
1537 drive. Put close() just before each run_program(). Fixes
1540 kes Add PoolId to Job record when updating it at job start time.
1542 kes Pull in more code from 1.39 so that there are fewer file
1543 differences (the new ua_dotcmds.c, base64.h, crypto.h
1544 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1545 util.c. Aside from ua_dotcmds.c these are mostly crypto
1547 kes Implement new method of walking the jcr chain. The
1548 incr/dec of the use_count is done within the walking
1549 routines. This should prevent a jcr from being freed
1550 from under the walk routines.
1555 kes Start implementing Verify list output.
1556 kes Move the suitable_drive flag to a better place to prevent
1557 premature termination of the reservation if all drives
1558 are busy -kes should fix Arno's diff/inc pool failures.
1560 kes Add mutex to single thread VSS code in Win32.
1562 kes Simplify code in askdir.c that waits for creating an appendable
1563 volume so that it can handle multiple returns from the wait
1565 kes Modify the wait code to permit multiple returns.
1566 kes Return a zero when 'autochanger drives' is called and
1567 it is not an autochanger.
1568 kes Make rewind_dev() a method taking a DCR as an argument.
1569 This permits closing and reopening the drive if the
1570 rewind fails as happens if the drive was loaded while the
1571 file descriptor was open. This refreshes the file descriptor.
1572 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1573 if the device is open or not. This should eliminate
1575 kes Return error if reserve cannot find at least one suitable device.
1576 kes Make wait_for_sysop() return correct state information.
1577 kes Fix Win32 state file problem. write was not using compat
1578 code. This should fix bug #500.
1580 kes Modify gui on command to set only GUI mode and not batch.
1581 kes Modify .messages command to always print messages regardless
1583 kes If GUI mode is on, suppress automatic printing of
1585 kes Delete old bnet packet code.
1586 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1587 wx-console. -kes not implemented because bconsole must be updated.
1588 kes Modify restore command in wx-console to set gui on and to use
1589 only .messages instead of messages. Hopefully this fixes bug
1591 kes Fix seg fault in exit of acquire when canceling a job --
1592 reported by Wolfgang Denk
1593 kes Pull in latest reservation system changes from 1.38
1594 kes Make .messages command always print messages regardless
1595 of the automessages flag.
1597 kes Fix seg fault if user labels a drive directory bug #513
1598 kes Remove quotes around Version as it breaks things.
1600 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1601 kes Apply sparse code fix for raw drives and fifos. Bug 506
1602 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1604 kes Correct reservation system to do a last ditch try
1605 for any mounted volume, then anyone anywhere.
1606 kes Add quotes around table Version because of
1607 error in MySQL 4.1.15 -kes bug report submitted.
1608 kes Correct some minor problems with btape in the fill
1610 kes Updates to ssh-tunnel from Joshua Kugler.
1611 kes Added a report.pl program from Jonas Bjorklund.
1612 kes Simplify the O_NONBLOCK open() code for tape drives,
1613 and always open nonblocking.
1614 kes Do not wait for open() if EIO returned (shouldn't happen).
1615 kes Eliminate 3 argument to tape open().
1616 kes Correct the slot # edited in the 3995 Bad autochanger unload
1618 kes With -S on bscan (show progress) do not divide by zero.
1620 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1621 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1622 kes Remove unused code in wait_for_device.
1623 kes Make wait_for_device() always return after 60 seconds of wait.
1627 kes Add stubs for non-crypto build.
1629 kes Use localhost if no network configured
1631 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1632 kes Remove debug print.
1633 kes Add bail_out in error during state file reading.
1635 kes Merge changes made to 1.38.3 into HEAD
1636 kes Add stubs for pygtk-console code
1637 kes Create Makefile.in for pygtk-console code
1639 kes Merge updates into 1.38 branch
1640 kes Update specs to include mysql4 define.
1641 kes Fix when attributes are sent, must be after binit().
1642 kes Stop read_record() if status not ok in second loop.
1643 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1644 and partial records in read_record(). This allows bscan
1645 to get FileIndex at EOT correct.
1646 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1648 kes Fix Win32 built to work with new crypto code.
1649 kes Apply patch supplied by user (slightly modified) to fix
1650 correct detection of holes in block devices and FIFOs.
1652 kes Apply patch supplied by user (slightly modified)
1653 to fix SD hang with multiple pools and bad client
1654 IP. Fixes bug # 508.
1656 kes Add nagios plugin to the examples directory. Submitted by
1658 kes Remove warning message about multiple saves of hardlinked files
1659 from find_one.c as it can generate too many warning messages.
1660 kes Modify most restore error messages to be queued so that they
1661 appear at the end of the job rather than mixted with the restore
1662 listing where they could be 'lost'.
1664 kes Reset timeout values before select() per patch from
1665 Frank Sweetser for problems with non-blocking sockets.
1666 kes Unlink the state file if either reading or writing it gets
1667 errors. Hopefully this will fix Win32 exit problems.
1668 kes Add sanity check in append.c to ensure that dcr is not NULL.
1669 This can happen if multiple drive autochanger SCSI control
1670 channel and drive indicies do not correspond.
1672 kes Get next volume from Scratch pool before creating a volume.
1673 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1674 kes Remove argument from create_bacula_database for SQLite as it
1676 kes Add back index code so that two drive autochangers can get
1678 kes Change a bunch of debug levels to aid debugging autochangers.
1679 kes Fix reservation so that mutexes are properly applied.
1680 kes Rework reservation algorithm so that two drives can be used
1683 kes Landon merged his data encription changes into the HEAD
1684 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1685 If this patch is applied, the number of days can be specified with
1686 'list nextvol days=xx'
1688 'status dir days=xx'
1689 My use case is to be able to preview the next scheduled job (and the
1690 next tape to be used) on fridays if there are no scheduled jobs during
1694 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1695 kes Fix malformatted bnet error message that caused seg fault
1697 kes Applied user patch to improve README.vc8 in src/win32.
1699 kes Add Migrate, Copy, Archive Job types (some where there)
1700 kes Correct some more editing of JobId's (for 64 bit compatibility).
1701 kes Ensure that StorageId is stored in Media record when ever possible.
1702 kes Add Migration Job to Job.
1703 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1704 Next Pool to Pool resource.
1705 kes Add more code to mac.c (migration archive copy).
1706 kes Change Start Storage daemon job to require read and write storage
1708 kes Pass read storage data to SD as well as write storage data.
1709 kes Remove old code from winservice.cpp
1710 kes Break on error in scan.
1711 kes Fix typo in signal.c
1712 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1713 kes Cleanup how find_device() works.
1714 kes Add read output to Status in SD.
1717 kes Add red-black btree routines
1719 kes Remove abs() in bfile.c so that it compiles on Solaris.
1722 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1723 kes Fix bnet-server bug found on OpenBSD. Bug #486
1724 kes Fix cancel failure bug. Bug #481
1725 kes Fix failure when Pool name has spaces. Bug #487
1726 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1727 kes Fix a couple of free()s in src/filed/acl.c
1728 kes Fix memory overrun in bfile.c in building OS X resource
1729 fork filename. Bug #489
1730 kes Add Pool name to SD status output.
1732 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1733 kes Make sure to set storage before trying to set drive.
1734 kes Add bacula_mail_summary.sh to examples directory. It makes
1735 a single email summary of any number of jobs. Submitted
1737 kes Make sure when we do a mount to unblock the device even
1738 if the drive could not be opened.
1740 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1741 and correct a few minor problems to make it build on Linux.
1743 kes Remove delete of CVS from all Makefiles
1744 kes Fix seg fault when clicking on Add button in wx-console
1745 restore panel. Bug #470.
1746 kes Fix copyright date and URL typo -kes bug #468.
1747 kes Change autostart install for FreeBSD to look for rc.conf
1748 rather than rc.local as suggested fix for bug #466.
1749 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1750 grant on status. Bug #465
1751 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1752 update script. Bug #464
1753 kes Tweak #ifdefing a bit in new Win32 stream code.
1754 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1755 kes Add documentation of performance #defines
projects / bacula / bacula / blob