1 Technical notes on version 1.39
6 kes Complete hopefully the last of the copyright transfer changes.
7 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
8 that migration writing to multiple volumes doesn't mess up reading
9 Volumes. This should fix bug #720 -- multivol migration fails.
10 kes Make migration SQL look only for Type='B' jobs to migrate. This should
11 fix bug #724 jobs getting migrated twice.
12 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
13 kes Implement dev->clear_cap() and dev->set_cap() methods.
14 kes Turn off disk seeking on restore for DVDs since I am not 100%
17 kes Implement code that should properly set that a job was migrated,
18 if the migration was successful even if there were no file to
20 kes Apply Richard's patch to fix building or filed/restore.c without
22 kes Ensure that at least one block is written by the SD even if the
23 FD dies or fails -- should fix bug #728.
24 kes Convert stored/record.c ASSERT into a soft fail if the length of
25 a record is too insanely long. This should fix bug #???
27 kes Fix automatic labeling of File volumes, which was broken by new
28 removable device code.
30 kes Remove typedef uLong for HP in baconfig.h. It broke things.
31 lf Fix job byte reporting -- the digest code runs in verify.c and
32 increases this value. The better solution is to digest the
33 stream as we receive it, thus removing the need to re-read
34 from disk at all, but that requires more extensive and
35 potentially destabilizing changes.
36 lf This commit fixes backup and restore of HFS+ resource forks.
37 lf Add a long-missing 'break' statement in HFS+ attribute
38 handling that resulted in restore failures.
40 ebl Fix runscript to always execute command after all job type.
42 Version 1.39.30 released:
44 kes Mark build-depkgs-mingw3 executable in configure process.
45 kes Update autoconf/config.h.in to include LOCALEDIR
46 kes Undefine NLS settings for wxWidgets as there is a conflict with
47 their way of doing things.
48 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
49 kes Change a bunch of ->hdr.name to ->name()
50 kes Straighten out handling of read and write pools for Migration, including
51 getting the code in the proper order.
52 kes Improve migration error messages and debug output.
53 kes Shorten code path in migration if nothing found to do.
54 kes Implement read/write pool in migration job report.
55 kes Move ua_run.c select_job_level code into a subroutine (readability).
56 kes Move ua_run.c display_job_parameters into a subroutine.
57 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
58 restore dependent on a valid catalog containing the Volume name.
60 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
61 make it easier for the user to change.
62 kes Fail any backup job that tries to use encryption and sparse options.
63 Hopefully this is a temporary change.
64 kes Correct the EndJob return string for non-backup jobs.
65 kes Review the encryption restore code.
66 kes Implement a new encryption regression test with compression.
67 kes Modify migrate not to fail if nothing found to migrate.
68 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
69 because they were not always set correctly.
71 kes Update configure.in to include python 2.5 search.
72 kes Back out unwanted migration change reported by Richard Mortimer.
74 kes Make migration with no files to migrate set normal termination.
75 kes Change message when job manually started to say Job queued. ...
76 kes Add job report indication of whether or not VSS and Encryption were
78 kes Modify sparseBlock variable name to make the code clearer.
79 kes Add more sparse tests to regress using gigaslam sparse file
81 kes Enable data encryption code.
82 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
83 only two blocks -- i.e. it is a real sparse file.
85 kes Enable disk seeking on restore.
86 kes Implement the SD 'Block Positioning = yes|no' directive. This
87 allows the user to turn off block level seeking, but restores
89 kes Change the word illegal to read invalid in a few places.
90 kes Fix Win32 build, which broke when I added parse_args_only in
91 lib. I'm not sure I got the entry point right for msvc.
92 kes Turn off data encryption. It can be enabled by defining
93 DATA_ENCRYPTION in src/version.h and recompiling.
94 kes Implement flag to turn off data encryption feature.
95 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
97 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
98 The main problem was that signatures were being generated on blocks
99 of zeros, which is unnecessary.
101 kes Fix scanner (next_arg) to handle leading double quote correctly.
102 kes Modify cd command in restore tree to look at full argument without
103 keywords. This fixes bug #716.
105 kes Do not update Migrated Job type if migration does not terminate
106 normally. This fixes bug #719.
107 kes Update ReleaseNotes
108 kes Purge Job records from the catalog for Migration. This was
109 not properly done previously. This fixes bug #718.
111 kes Initialize msg_type to M_INFO in migration. Pointed out by
113 kes Add some fflush() statements for debug output. This should not
114 really be necessary and defeats buffering but users continue
117 kes More copyright changes.
118 kes Make sure we don't detach from the despool read device since it
119 is a temporary structure where the condition variables are not
120 initialized. Bug #711.
122 kes Add Bacula version+date to Client record. This is a very minor
123 security problem in that passing the version facilitates a hacker's
124 life, but it will make support easier.
125 kes Implement fixes to make disk seeking work. Currently turned
126 off in version.h pending reserch on what problems it will cause
127 because of the previous bsnprinf() sign extension bug.
129 kes Add Landon's refactor of restore Feature request to the
131 kes Tweak debug levels and messages for examining the disk
134 kes Cleanup some of the error termination code in migration.
135 kes Separate read/write source strings to keep track of where
136 storage devices are used in a job.
137 kes Implement a new method of keeping track of which storage
138 device is used in a Job. USTORE keeps both a pointer to the
139 resource and to the source string.
140 kes Modify all code to use new storage set subroutines in job.c
141 kes Modify migrate.c so that the definitive selection of the storage
142 resource is done in the do_migration_init() routine prior to
143 the job going into the job queue. This permits accurate
144 deadlock detection (same read and write storage resource).
145 kes Remove bfill from btape (I think it was a left over stub).
147 kes Make sure that the storage for a job is pulled first from
148 the Pool and if not from the Job.
149 kes Ensure that either the Pool or the Job specifies a Storage
152 kes Start applying new FSFE copyright.
154 kes Add additional error messages in acquiring a drive for read.
155 kes Make WritePartAfterJob the default so that the last DVD part
156 always gets written to the DVD by default.
157 kes Add additional error messages in migration.
158 kes Suppress redundant error messages in migration (possibly more to do).
159 kes Apply Martin's fix (updated to 1.39) that takes into account
160 run storage overrides in the Director status display.
161 kes Implement, but turn off the submitted code that sets the EOT
162 model on FreeBSD machines. Turning on this code is too risky at
163 this point in the development.
165 kes Implement unique dbid routine for migration to prevent the same
166 JobId from being migrated twice. This should fix bug #709.
168 kes Apply Jaime Ventura's 'mail on success' patch.
169 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
170 if memory usage gets too big.
171 kes Tweak migration to ensure that read/write devices are different.
173 kes Create an AUTHORS file to list Bacula contributors.
174 kes Add Richard Stallman's four GPL freedoms to LICENSE
175 kes Require the conf file to have a valid NextPool for writing the
178 ebl Enable RecycleCount in catalog.
179 ebl Fix "echo python | bconsole" segfault
181 kes Implement code to pass the MediaId to the SD. The SD then uses
182 this MediaId when creating JobMedia records. This fixes a bug
183 with Migration where the MediaId got set to the second Volume
184 read rather than the write Volume. Possibly (unlikely) fixes
186 kes Remove NextPool from Job resource.
187 kes Edit a few numbers in the restore dialog with commas.
188 kes Note, the DIR<->SD protocol has changed.
190 kes Replace () by {} in configure.in for proper HP configuration.
191 kes Shorten some lines over 80 characters in filed/backup.c
192 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
194 Version 1.39.28 released:
196 kes Change error message 'illegal' to 'invalid' -- bug #707
197 kes Add rather primitive device resource deadlock detection in
198 the job queue handler. It detects the same read and write device
199 for migration and cancels the job.
200 kes Start adding a unique_dbid_hander() routine in migration to avoid
201 duplicate mediaids and duplicate jobids.
202 kes Add patch from bug #708 to permit relative paths such as ../xxx
203 in the restore tree routine.
204 kes Add Eric Bollengier's patch to reduce locking time in the SD after
205 despooling, and thus many jobs finish faster.
206 kes Correct locking order of reservations lock and device mutex in
207 reserve.c -- this should correct Arno's deadlock that occurred
208 when doing mount/unmount at the same time a job is reserving a
211 rbn Fixed problems with encryption when combined with compression
212 or sparse files. Unfortunately this means that all previous
213 encrypted backups can't be restored.
214 rbn Fixed problem in bfgets with Windows and Mac end of lines.
215 rbn Fixed bug in Windows version of close_bpipe() that cause programs
216 like bsmtp() to hang waiting for the pipe to be closed. Fixed
217 binary file type problems in open_bpipe().
218 rbn Fixed a number of bugs in the mysql DB scripts.
220 ebl Fix broken runscript on director. (RunBefore, RunAfter)
221 ebl Use M_ERROR instead of M_FATAL in runscript.c
223 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
224 rbn Ignore UTF-8 marker at the start of .conf files.
225 rbn Add stab2cv to 3rd party dependencies. This is a utility I
226 wrote that is licensed under the GPL and available on SourceForge.
227 It converts the stab debugging info generated by gcc into Codeview
228 format. Currently it just translates function names to global
229 symbols. This is sufficient to get reasonable stack traces from
230 Dr Watson and to look at minidumps.
231 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
232 rbn Enable Windows XP look and feel for the tray icons and wx-console.
233 rbn Add Windows specific FileSet example to bacula-dir.conf.
234 rbn Reorganize Start menu so that documentation and configuration are
237 rbn Change daemons and utilities so that if -c is omitted from the
238 command line AND there is no configuration file in the current
239 directory then the 'standard' configuration file (eg
240 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
241 doesn't contain any path separators AND there is no configuration
242 file by that name in the current directory then the 'standard'
243 configuration file directory will be searched for a file by that
245 rbn Fixed restore on Windows so that backslashes as path separators works.
246 rbn Add missing query.sql file to Windows installer.
247 rbn Fixed Windows versions of catalog backup scripts.
249 kes Fix optional files in Makefile.in of src/filed that caused
250 a syntax error when using no optional files.
252 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
253 messages; there is no reason to attempt to load a private key.
254 from master key files.
256 Version 1.39.26 released:
258 kes Apply the three patches from Richard Mortimer.
259 bacula-reposition.patch, bacula-tape-reopen.patch, and
260 bacula-eod.patch. This corrects tape positioning on older devices,
261 and also a problem with btape.
262 kes Apply fix from bug report #696 where writing to a FIFO does not
263 work due to a dumb typo.
264 kes Unlock the tape door before the file descriptor is released. This
265 should fix lots of somewhat subtle failures when using an autochanger.
267 kes Correct mtx-changer bug that I introduced in a recent commit, and
268 pointed out by Robert Nelson -- thanks.
269 rbn Fix Windows' daemons so that messages print to stdout if not
270 running as a service.
271 rbn Add daemon name to trace file name (eg bacula-dir.trace).
272 rbn Fix environment variable expansion in directory names on Windows.
273 rbn Fix autochanger support in fill command.
274 rbn Update SQL scripts to match Unix versions.
275 rbn Fix daemon usage displays.
276 rbn Cleanup bacula-dir.conf template.
277 rbn Install openssl.cnf so that the openssl.exe installed in the
278 Bacula\bin directory can be used to generate keys and
279 certificates for TLS and encryption.
280 rbn Fix cleanup of spool files on Windows.
281 rbn Remove /silent option from daemons on Windows. The new default
282 is the same as the old /silent. To enable the message boxes that
283 previously were suppressed by /silent you must add /debug instead.
284 NOTE: As a result of this change, the first time you upgrade from
285 a previous version of 1.39.x you will receive the message
286 boxes when the remove of the old services succeeds. This
287 is the same behaviour as when migrating from a version prior
289 However, going forward, these message boxes will not appear on
290 upgrades or new installs.
291 rbn Add new /debug option. This option enables the message boxes that
292 previously were suppressed by the /silent option. In addition the
293 daemons running as services will open a console window if this
295 rbn Fix bug with service not being removed on migrated installs. This
296 should correct those cases where the file daemon install was failing
297 when upgrading from versions prior to 1.39.x.
300 kes Turn on heap reporting in Dir with zero debug level.
301 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
302 send the same message to stdout.
304 kes Begin work on new GUI "console".
305 kes Make configure look in non-standard MySQL library directory
307 kes Make mtx-changer automatically configure the autochanger wait
308 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
310 kes Correct drop_sqlite_tables.in script to not delete the database.
311 kes When writing to a log file, close and reopen the file descriptor
312 if there is an error writing the file.
313 kes Modify the autochanger loaded?, load, and unload commands to print
314 the full text of any mtx output if there is an error. Helps to
315 ease diagnosis of autochanger problems.
316 kes Correct a few Win32 errno returns in the VSS code so that hopefully
317 a resonable Win32 error message will be printed.
318 kes Convert a few strcat()... to bstrncat() in the Win32 code.
320 rbn Added Windows version of bsmtp.
321 rbn Fixed path search for Windows so that Bacula\bin is automatically
322 searched for programs and scripts.
323 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
326 Version 1.39.24 beta released:
328 rbn Fix restore problem with c:\ prefix bug #676.
329 rbn Verify that drive letter is valid on restore.
330 rbn Fix re-open() options for tape.
331 kes Apply dvd find volume patch from Richard Mortimer.
332 kes Eliminate the dvd specific mount routines using only the
334 kes Make update_free_space a method of DEVICE and rename
337 kes Require a messages command acl to be able to receive messages
339 kes Add console, system, and scan job types in util.c.
341 kes Print the Volume purged message only for real jobs to keep
342 from cluttering up the daemon messages.
343 kes Lock the tape drive door while Bacula is using the device.
344 kes Add back the 'No Jobs running' message to FD and SD status because
345 my regression script depends on it, and I'm too lazy to change the
347 kes Start using structure assignments (not too happy about it ...).
348 kes Fix a bug in the tools Makefile that broke on Solaris.
349 kes Unload any autochanger drive during a 'release' command.
351 kes Enhance error message when restoring without bootstrap file.
352 kes Check restored size only for regular files.
353 kes Store Python job level in job record in Dir.
354 kes Add back code to open tape device nonblocking, but if rewind fails
355 release file descriptor.
356 kes Modify acquire.c to first try autoloading the device. Also, ask operator
357 to mount tape if drive cannot be opened.
358 rbn Made Windows service tray status windows resizable.
359 rbn Fixed horizontal scrolling of text in status window.
360 rbn Preserve horizontal and vertical scroll position while
361 updating. This prevents the display being reset to the
362 top line every 5 seconds.
363 rbn Fix Windows cross-compile compatibilty problems with
364 *nix variants such as OS X without the zic command.
365 rbn Eliminate dependency on man2html.
367 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
369 kes Fix a compiler warning in compat.cpp
370 kes Change strcpy to bstrncpy in compat.cpp
371 kes Remove some broken code in bdb_list.c
372 kes Fix, hopefully the last, ACL problem in the restore command.
373 kes Update the README.mingw32
374 kes Add new version of upgrade-win32-client.txt to examples directory.
375 Submitted by Michel Meyers.
376 kes Print an INFO message in the job report when a Volume is marked Purged.
377 rbn Fixed handling of external program and script execution
378 so that the format of the command line is more flexible.
379 Now executable path names containing spaces are translated
380 to the equivalent short name automatically. The result is
381 passed to cmd.exe with the quotes removed.
383 kes Apply the recycle patch from Richard Mortimer.
384 kes Convert a few if statements in dev.c to switch statements.
385 kes Start using print_errmsg instead of bstrerror().
386 kes Print a job message in SD when a job is marked to be canceled.
388 kes All code added back. Fixed block.c read/write to loop only 3
389 times. This apparently keeps the OS from crashing (at least
391 kes The kernel bug still persists. Backup something then immediately
392 do a bscan on the same tape, and the kernel will crash.
393 kes Simplifed tape open(). It no longer uses nonblocking mode, which
394 means that opening with no tape loaded will probably take at least
395 6 minutes before an error is reported.
396 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
397 when doing set_os_device_parameters.
398 kes Report open error in mount.c
399 kes Remove all .exe files from the installer directory on make clean.
401 kes Start adding back removed code.
402 kes Back out a number of changes because backups to tape crash my
404 kes Remove the inetd code from the File daemon.
406 kes Add -c option to pg_dump so that it initializes tables when
408 kes Fix FirstWritten time on Volume to be obtained from SD so that
409 it is the actual time the volume was first written.
410 kes Minor Makefile changes.
411 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
412 ebl Add yes keyword to prune/purge command
414 kes Correct a test in block.c that prevented restore of a DVD from
415 looking at the last part in the spool directory.
416 kes Make some error messages clearer mostly by using the word DVD
417 in the message. Improve infor message in read_record for DVDs.
418 kes Remove DVD kludges in dircmd.c label/relabel.
419 kes Move the dvd relabel code from dircmd.c into
420 write_new_volume_label_to_dvd() adding a relabel argument.
421 kes Rewrite the truncate_dvd() code to be much simpler and
422 more logical. First blow away any spool part, then create a
423 new empty part and write to the DVD.
424 kes Rewrite the can_write_on_non_blank_dvd() code making it
425 only ensure that no valid data is on the DVD -- i.e. it
428 kes Minor Makefile fixes.
429 kes Put attach_dcr_to_dev in a subroutine.
430 kes Make attaching/detaching to/from a device use a flag and
431 only detach if actually attached.
432 kes Add dvd-simulator.in to scripts directory and add to configure.
433 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
434 This could be a cause of a number of drive reservation problems.
435 Note, this code is now in attach_dcr_to_dev().
436 kes Suppress doing Volume updates if it is a system job. This should
437 prevent the DVD label blocking.
438 kes Clear the freespace ok flag in a couple of strategic places.
440 kes Put removing zero sized spool part file in subroutine and
441 call from release_device().
442 kes Add Richard's patch for relabel to dircmd.c, but save and restore
444 kes Rework a lot of subroutines in dev.c to take dcr as an
445 argument. This is done to eliminate the usage of attached_dcrs
447 kes Change truncated_dvd to blank_dvd, which seems more suitable.
448 kes Apply most of Richard Mortimer's truncate patch.
449 kes Create lseek() method for DEVICE that takes dcr as an
450 argument. This is to eliminate the use of attached_dcrs in
451 lseek(). The calls to lseek_dev() must still be changed.
453 kes Apply Richard Mortimer's patches for printing an error
454 message in btape when a DVD is used, and to initialize traceback.
455 kes Added error message to btape when trying to access a file.
456 kes Move prototype of update_slots() to protos.h.
458 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
459 and FDJobStatus to the Director Python variables.
460 kes Make sure valid argument passed to str_to_utime() where Arno
462 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
463 I.e. part of two different patches.
465 kes Modify disk changer to simulate some of the error conditions
467 kes Make sure the close() call in the SD tools is just before the
469 kes Implement dir_get_volume_info() in bls using the patch from
470 Richard Mortimer but call find_num_dvd_parts().
471 kes Implement find_num_dvd_parts() that mounts and scans a DVD
472 and counts the parts.
473 kes Move the omode code in open_dvd() up so that the cannot
474 write on blank disk can check can be bypassed for read mode.
477 kes Disable normal data spooling for DVD writing which uses
478 a different spooling mechanism.
479 kes Apply patch from Richard Mortimer to ensure that the number
480 of DVD parts is correctly updated.
481 rbn Save installer details log in the Bacula directory as
483 rbn Add installer generation of client and storage templates
484 suitable for @inclusion on the director.
485 rbn Mark previously installed components for Win32 read-only since
486 deselection doesn't do anything.
488 Version 1.39.22 beta released:
490 kes Fix logic error in handling error return from mtx-changer
492 kes Make status from SD aware of -1 (unknown) Slot status.
493 kes At Eric's suggestion make both the 'slots' and 'drive' commands
494 to the Storage daemon work even if the drive is busy.
495 kes Make two separate Win32 menu links for starting bconsole and
496 wx-console in winbacula.nsi
497 kes Apply DVD part_spooled patch from Richard Mortimer
498 richm@oldelvet.org.uk
499 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
500 rbn Fixed problems migrating settings from previous releases in
501 Win32 installer. Add Readme.txt with an option to show it on
502 the installer Finish page.
504 kes Use get_catalog_resource() to open catalog database
505 to ensure that ACLs are respected and that user is
506 correctly prompted for database.
507 kes Integrate multiple console/director patch from
508 Carsten Paeth calle@calle.in-berlin.de
509 ebl Add character substitution in Job/JobDefs WriteBootStrap.
510 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
511 kes Apply patch supplied in bug #656 to pass priority field
512 in the run dialog to the Director in gnome console
513 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
514 this will fix bug #627 where Bacula eventually gets
515 confused about what Volume it wants.
516 kes Add a new close_part() class in the SD to save the device
517 state around open/close_part/open for DVD writing. This
518 should fix the num_dvd_parts getting zeroed as reported by
520 kes Apply patch from Richard Mortimer that correct edit code
521 for debug output of st_size.
522 ebl Add support of encrypted data stream to bscan.
523 display data_len instead of data content (may be binary)
525 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
526 bcopy. Fixes bug #669 reported by Eric.
527 kes Fix incorrect number of arguments in SQL statement in
528 sql_get.c as reported by Eric.
530 kes Update examples directory.
531 kes Remove unused variable in winservice.cpp
532 kes Make Win32 make command build installer.
533 rbn Add new Install Type page, used to select between Automatic
534 and Custom installs. Automatic installs only prompt for
535 configuration items that can't be reasonably defaulted.
536 rbn Added Bacula logo to page headers.
537 rbn Added Upgrade support
538 - Configuration and component selection are migrated from
540 - Configuration of upgraded components is preserved and
542 - Configuration of new components is handled according to
543 the Automatic / Custom selection.
544 - Component selection is defaulted to previously selected
546 rbn Installation of Server components is disabled on
547 Windows 95, 98 and ME.
548 rbn Added URLs for support, info and upgrades to Bacula entry
549 in Add/Remove Programs.
550 rbn Added Version info to Bacula entry in Add/Remove Programs.
552 kes Correct dvd code that breaks tape labeling.
553 kes Implement Enabled on update slots.
555 kes When doing a label, pass the VolBytes back to the Director,
556 which puts it in the catalog.
557 kes Print an error message if the user attempts to prune an
559 kes Need to start using %ld when sscanfing 32 bit values.
561 kes Correct the counting of VolCatBytes for DVDs.
562 kes Add code to mount.c to require that VolCatBytes corresponds to
563 what is actually found when doing an append.
564 kes Update freespace only after writing on the DVD.
565 kes Remove code that blows away the current part in the spool file.
567 kes Apply new dvd-handler patch from Richard Mortimer.
568 kes Tweak so that debug level 20 shows only DVD commands.
569 kes Correct spooled_part flag in dev.c close() so that it is cleared
570 when the spool file is deleted or does not exist.
571 kes Print part number in read_records when eof hit (restore).
572 rbn Installer default changed to start services on new install.
574 kes Make find with no args in tree restore return error rather than
575 stopping the selection. Fixes bug #665
576 kes Rework DVD writing to ensure that the last part is written
577 on open_next_part when dealing with a spool file.
578 kes Correct the lseek_dev() routine to handle end point correctly
579 (bug introduced by me).
580 kes Allow part number to exceed num_dvd_parts in lseek_dev().
581 rbn Change make_session_key on Windows to use WIN32 APIs to produce
583 rbn Add new tool scsilist.exe which displays the changer, tape and
584 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
585 to add them to bacula-sd.conf.
587 kes Apply dvd-handler patch from Richard Mortimer.
588 kes Apply dvd error check patch from Richard Mortimer.
589 kes Apply bpipe race patch from Richard Mortimer.
590 kes Rework how DVD labels are handled and set append only
591 when part > num_dvd_parts.
593 kes Rework many features of DVD writing and reading. Added many error
594 messages. Most importantly changed part to represent the current
595 part number base zero. This makes current DVD writing incompatible
596 with previous version.
598 kes Add host:port to connect failure messages to FD and SD from Dir.
599 kes Add WhereACL to console ACL list. If nothing is specified, only
600 the default is permitted for restore. Otherwise, *all* allows any
601 path, or you can specify permitted paths. This should allow control
602 over where users can restore files. This is untested.
603 kes Modified message to add a ? (as in loaded?) when querying the autochanger
604 for what Slot is loaded.
605 kes Fixed the use of Slot, so that is more correctly maintained, thus
606 eliminating unneeded duplicate calls to determine what Slot is loaded.
608 kes Install man pages with 'make install'
609 kes wx-console crashes because of differences between Bacula and wxWidgets
610 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
612 kes correct improper indenting in wx-console/console_conf.c
613 kes update wx-console header copyrights
614 kes Fix bug #658 where wx-console mangles file/directory names containing
617 kes Add Media.Enabled flag to client backups for dotcmds.c
618 kes Enforce Media.Enabled=1 for a current restore to work.
619 kes Require restore case 3 to have sqlquery permission to work.
620 kes Remove obsolete del_MAC sql command.
621 kes Ensure that bscan creates Volumes with Enabled=1.
623 Version 1.39.20 beta released:
625 kes Correct missing Client table reference in SQL pointed out by
628 kes Fix Win32 build (new entrypoint, start baculafd).
630 kes Add -n option to bconsole to turn off conio.
631 kes Print JobIds to be migrated in Job Report.
632 kes Add additional user supplied notes to the messages part of
633 bacula-dir.conf concerning multiple email addresses.
634 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
635 kes Add more recent Feature requests to Projects file.
637 kes Apply Maritn's fix to src/win32/Makefile.
638 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
639 kes Implement pruning for Migration and migrated jobs.
640 kes Implement PoolOccupancy migration.
641 kes Implement PoolTime migration.
643 kes If doing a mount, look for a slot, and if specified pass it to
644 the SD so that it can load the autochanger.
645 kes Return DVD=1 flag if a label command is done to a DVD. This
646 permits setting VolParts to 1.
647 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
648 rework ua_label code based on DVD media type to use DVD flag returned.
650 kes Eliminate some compile warnings in dird_conf.c
651 kes Format the bytes field in the terminated jobs part of the status
652 command for the three daemons with suffixes to reduce print size
653 of backup bytes. Suggested by a user.
654 kes When not descending into a directory, print the File= name that
655 triggered it -- makes why not descending a bit clearer.
656 kes Do not unload autochanger when doing a list command -- basic code
657 from Eric Bollengier.
659 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
660 to build-depkgs-mingw32. It now handles two options -h to display
661 help and -C to reextract the source and apply the patches. The -C
662 option is useful for updating the source after new patches are
664 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
665 This allows updating to new versions without having to modify the
666 script and makes it easier to figure out which packages and which
668 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
669 as build-depkgs-mingw32 except they are built using Microsoft Visual C
670 and placed in the depkgs-msvc directory. There is also an
671 External-msvc file to describe the packages.
673 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
675 kes Fix bug #462 incorrect error message printed when client script called
676 from File= was not found.
677 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
678 do a rewind on Solaris when no tape is in the drive (Solaris does not
679 have the detailed errno found on Linux). Added Solaris specific code.
680 Note, this may apply to other OSes as well.
682 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
683 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
684 fix bug 648 - update sqlite script patches, lock out gnome2console
685 builds for platforms with gtk+ < 2.4.
686 Updated build_rpm.sh - add remote source directory, add switch for
687 signing, refine file names.
688 Updated spec file again for Mandriva build as they have this curious
689 custom of silently converting all manpages to bzip2 format just before
690 the final packaging step.
692 rbn Fixed the Windows Makefiles so that they won't accidentally try and
693 pickup binaries for the Unix build. This allows both the Unix
694 build and the Windows build to be built in the same tree without
695 interfering with each other.
696 rbn Fixed error handling and cleaned up mtx-changer.cmd.
697 rbn Added the rest of the database scripts. These are installed but are
698 not yet edited for variable replacement.
699 rbn Broke out the cats functionality from bacula.dll and put into new
700 separate dlls for each database type. At installation time the
701 correct one is copied to bacula_cats.dll.
702 rbn Eliminate the need to install the mysql.dll on client only builds.
703 rbn Moved dird/sql_cmds.c into the cats directory so all the database
704 specific #ifdefs were in the cats directory.
705 rbn Added a new sql_cmds.h with all the declarations for the variables
706 exported from sql_cmds.c.
707 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
708 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
710 kes Correct improperly formatted list command output reported by Dan.
712 kes Correct despool time calculation.
714 kes Remove previous changes to compat.cpp as they create problems.
715 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
716 kes Attempt to fix problems with the msg_queue crashing on Solaris
717 when Bacula is terminating, but problems remain.
718 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
719 name editing problems with too many \\?\es.
720 kes Fix some Bacula source code style problems in compat.cpp.
721 kes Add debug code to compat.cpp and convert non-Bacula debug code
724 kes Change the name of the technical notes file from kes-1.39 to
725 technotes-1.39. Prefix my messages with 'kes '.
726 kes Allow dequeue_messages() to be called twice. Should fix bug
728 kes Add Job type to bscan Job information output.
730 kes Update copyright date in program files, and for the most part
732 kes Implement %q in bsnprintf.c apparently I forgot it.
734 kes Make disk-changer sed command compatible with FreeBSD.
735 kes Make a first cut at a ReleaseNotes and ChangeLog for a
737 kes Make make clean descend into the src/win32 directory.
738 kes Fix some #ifdefing so that Solaris and FreeBSD compile
739 sys/stat.h was turned off.
740 kes Use suffix editing for new transfer rate messages.
741 kes Attempt to come up with a workaround which seems to be an OS
742 bug where write() returns EBUSY. IMO this should not happen.
743 It triggered in truncatebug test. The workaround retries using
745 kes Eliminate a strerror() call in a class method that failed with
747 kes Use rm -rf rather than rmdir to delete the src/win32/release
748 directory during make clean.
750 kes Make bscan ignore ACL streams.
751 kes Update projects files with new Feature Requests.
752 kes Generate current English and French manuals and upload
754 kes Update the home page to include the new British/French flags to
755 switch between translations. Work done by Alexandre Baron.
756 kes Make disk-changer script print an error message if the changer
757 directory is not defined.
758 kes Create a generic DB routine for getting an int (32/64 bit) from
760 kes Add more migration code.
761 kes Add a few more files to .cvsignore here and there.
762 kes Minor fixes for SD write rate and despooling rate.
763 kes Turn off new test code in src/console.c
767 kes Incremented the version number to signify that all of Robert's code
768 for Win32 that was in the branch is now integrated into the HEAD,
769 and that Eric has submitted code that we hope will provide limited
770 backward compatibility with 1.38 file daemons (more testing to be
772 kes I rationalized a few of the names of the variables (mainly jcr names)
773 that are used during migration as keeping three different jcrs at the
774 same time clear in ones head is not easy.
778 eb Tweak new runscript feature to work with 1.38.x FDs.
779 eb Correct crypto.c to fix segfault when restoring an encrypted stream
780 on fd which don't use rsa keys.
781 eb Add yes/no English keywords on localized yes/no questions.
783 kes Several important commits from Robert Nelson for code cleanup and
785 kes Modify console.c so that when conio is enabled, it converts \n to
786 \n\r before outputting to the console. Hopefully this will fix
787 the problems with expect in Perl that Eric saw.
789 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
791 kes Add Comment field to llist of a volume.
792 kes Allow true/false in some yes/no questions.
793 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
794 kes Remove a few /n's when scanning commands from another daemon. This
795 permits adding additional fields later.
796 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
797 kes Update README.mingw
799 kes Tweak authentication to work with 1.38.x FDs.
800 kes Tweak catalog make scripts.
801 kes Fix catalog upgrade scripts so that they work.
802 kes Correct despooling debug code to eliminate race condition.
804 kes Add additional fields as specified by Arno to LocationLog.
805 kes Add comment field to the Media record.
806 kes Add Time field to the Log record.
807 kes Correct migration SQL (thanks to Bill Moran) so that it
808 runs with PostgreSQL also.
809 kes Add spooling/despooling info in status output of SD.
811 kes Spend a lot of time integrating mkcdrec with the rescue disk.
812 kes Add VOLMGMT message class for volume management messages (none yet).
813 kes Add CATALOG as a destination. It goes into the LOG table.
814 kes Implement the Log table in the DB.
815 kes Implement the Location Log table in the DB (for user use).
816 kes At Eric's request add a run_scripts() just after blast_data in
819 kes Add Enabled column to Location, correct some typos in DB schemas.
820 kes Correct bug I introduced into RunScripts enum.
821 kes Add log table to Catalog
822 kes Purge original job migrated if the migration terminates normally.
823 kes Cleanup purging of files/jobs so that it is done only in a
825 kes Add new VOLMGMT message class.
826 kes Add Catalog message destination (user conf code remains to be written).
828 kes Modify read_record and friends to properly deal with migration
830 kes Update debug code in read_record.
832 ======================= Warning ==========================
833 Separate read and write storage in Jobs in the Director. This
834 is a major rewrite of some of the low level code and hence has
835 a high probability of introducing bugs.
836 ==========================================================
838 kes Move the job init code up to *before* the job is put into
839 the job queue (resource allocation queue). This permits the
840 job to establish whether it will read or write or do both.
841 kes Add name() methods to all the resource classes.
842 kes Implement separate read and write storage resource
843 allocation/deallocation in jobq.c
845 ======================= Warning ==========================
846 Implemented new method of getting the default Storage from the Media
847 record rather than from the MediaType for restore. As a fall
848 back, if no Storage is defined, use the MediaType. This
849 eliminates most all prompts if there are multiple MediaTypes
850 used. This is an important and fundamental change.
851 ==========================================================
853 kes Add more detail (Storage, Device) to list of volumes printed
855 kes More code in migrate. In particular start multiple jobs if
857 kes Probably overkill, but ensure that the bsr is unique even within a
859 kes Rework bsys.c drop() so that it now should work as expected.
860 kes Update a bunch of old copyrights -kes particularly in .h files.
861 kes Remove src/lib/bshm.c/h
865 ======================= Warning ==========================
866 All hash codes in the database are now kept in world
867 compatible base64 format (no = filling). This means that
868 all FileSets will be updated and if you are running
869 verify jobs, you must do an InitCatalog.
870 Authentication uses the new algorithm, but should be
871 backward compatible with 1.38.x
872 ===========================================================
874 kes Modify the authentication routines so that the 1.39.15 Director
875 always runs with the compatible binary to base64 code (same as
876 the rest of the world). It will however detect if an SD or
877 FD is running the old code and if that is the case, will use
878 the old algorithm for authentication. However, all consoles must
879 use the compatible algorithm, and all data entered into the database
880 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
881 use the compatible algorithm.
882 kes Rename the cram_md5 routine names to be slightly more appropriate
883 to what they are doing (challenge and respond).
884 kes Robert committed his #ifdef and header cleanup.
886 kes Fix a compiler warning in files/backup.c
887 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
889 kes Robert committed his low impact changes.
890 kes I removed a size_t from the jcr.h definition.
891 kes Update the tape regression scripts (still to be tested).
892 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
893 kes Require done or quit to exit from in memory tree restore.
895 kes Write install/uninstall of new manpages. There are now a
896 pile of man pages. Some of which need a lot of work.
898 ======================= Warning ==========================
899 The --mandir ./configure option now points to the top level
900 man directory. The man files will be installed under
901 mandir/man8 and mandir/man1 as appropriate.
902 ==========================================================
904 kes Add complete text of GPL to LICENSE.
905 kes Implement job report that indicates where Storage and Pool
906 came from -kes with overrides and Pool storage and NextPool,
907 it is all very complicated.
908 kes Create a few common subroutines for backup.c and migrate.c
909 kes Eliminate warning messages from tray-monitor.c
911 kes Apply fix for scheduler for missing unlock_jobs().
912 kes Clean out autoconf caches before rebuilding configure
913 kes Fix the FreeBSD pthreads lib define updated by Dan.
914 kes Add missing semicolon in src/console/console.c
915 kes Add Robert's enhanced version of build-win32-cross-tools
916 as well as his patch file.
917 kes Note, the new gcc options are likely to break building of
918 wx-console or the tray-monitor ...
920 kes Implement Robert's suggestion to suppress printing compile lines.
921 kes Detect GCC correctly (I hope)
922 kes If using GCC (actually g++) add the following compiler flags
923 -fno-strict-aliasing -fno-exceptions -fno-rtti
925 ===================== Warning =============================
926 Turn on new bsnprintf() code. This could cause print output
928 ===========================================================
930 kes Fix crypto when not using openssl. I previously overlooked this.
931 kes Eliminate crypto type punning problems by eliminating void * and
932 using uint8_t * instead.
933 kes Harden authentication failure in FD by single threading errors
934 and forcing a 6 second wait.
936 ===================== Warning =============================
937 Removed 'Accept Any Volume' directive.
938 ===========================================================
940 kes Major cleanup and simplification of regress using shell functions
941 (more tests to be converted to new format)
942 kes Add detection of 64 bit Irix as indicated by user.
943 kes Increment catalog database id from 9 to 10.
944 kes Add a few of the new database fields to the various C++
946 kes Implement code to fill in the most important new fields (e.g.
948 kes Ensure that most of the new fields are in create/get/insert/update.
949 More work to be done.
951 kes Update some very old licenses in src/cats.
952 kes Modify the database format for handling Migration jobs:
953 Add PriorJobId, RealEndTime to Job table
955 Remove Stripe from JobMedia record (not used, wasting space)
956 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
957 Add Cost to Location table.
958 kes Delete mac_record subroutines.
959 kes Add new table values to create/update/get routines as appropriate.
960 kes Update the update_tables and make_tables scripts.
961 kes Make a first cut in using a union where multiple pointers (actually
962 pointers to pointers) are stored.
963 kes Make some changes to base64.c suggested by Robert and others and add
964 a small amount of documentation.
965 kes Add some changes suggested by Peter for Solaris (bregex...)
966 kes Make runscript.h always built because it needs to be pulled into
967 more places. In particular its RES was left out of a union.
968 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
969 This makes it slightly easier to detect uninitialized variables.
971 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
972 sometimes creates install problems.
973 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
974 Nelson's code. More to do.
975 kes Convert a few store_bit to store_bool in filed_conf.c.
976 kes DVD tweak to block.c as supplied by Uwe Muessel.
978 kes Modify configure.in to check for typeof().
979 kes In findlib/attribs.c use typeof instead of templates if possible.
981 kes Implement partial error messages for src/filed/acl.c
982 kes Fix return code to fail when doing update barcodes and
983 Pool resource is not found. This previously caused Volumes
984 to be labeled as cleaning tapes.
985 kes Small updates to projects.
987 kes Add Eric Bollengier patch for new RunScript directive. It breaks
988 compatibility between dird and fd.
990 kes Prevent DVD code from rewriting label if the device cannot be
992 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
993 fix Debian build bug.
994 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
995 kes Integrate manpages contributed by Jose Luis.
996 kes Update projects file.
997 kes Add manpages Makefile.in to configure.in
998 kes Remove installation of bacula.8 in scripts directory.
1000 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1002 O_NOATIME is a open() flag which makes it possible to read a file without
1003 updating the inode atime (and also without the inode ctime update which
1004 happens if you try to set the atime back to its previous value). It also
1005 prevents a race condition when two programs are reading the same file, but
1006 only one does not want to change the atime. It's most useful for backup
1007 programs and file integrity checkers (and bacula can fit on both
1010 Recent versions of the Linux kernel and glibc have support for it (the
1011 glibc support being mostly copying the O_NOATIME definition to
1012 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1013 it does nothing (since the kernel ignores unknown flags).
1015 If the kernel has support for it, trying to use it either works, fails
1016 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1017 are not either the owner of the file or root). A simple way to prevent the
1018 failure is to open the file without the flag and set it later with
1019 fcntl(F_SETFL), ignoring any EPERM errors.
1020 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1021 of restarted jobs to complete (due to a destroyed pthreads conditional
1022 variable used by the message thread).
1023 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1025 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1026 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1027 colons in query.sql file.
1028 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1029 not to create orphans.
1030 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1031 in restore long listing.
1032 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1033 of incorrect MarkedId.
1034 kes Apply patch from adioso bug #616 to correct text in manual (replace
1035 Director with File daemon).
1036 kes Rework a few of the zlib changes so that they build properly.
1039 kes Move DIR 'run' command to SD before starting the message thread
1040 as suggested by Cristopher Hull to avoid a race deadlock from
1041 two threads using the bsock structure.
1042 kes Modify LICENSE to correct some problems pointed out by Debian.
1044 kes Correct EOF with no \n lex.c problem.
1045 kes Tweak compat.h compat.cpp and merge with apcupsd
1046 kes Add additional INFO messages if autochanger cannot be used.
1049 kes Simplify Win32 Makefile
1050 kes Correct count of buffers/bytes used by smartall.c
1051 kes Updated compat.h after porting apcupsd to MinGW.
1053 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1054 started adding Makefile ...
1055 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1057 kes Reloading a bad configuration file doesn't kill director any more.
1058 Thanks to fix from Eric Bollengier.
1060 kes Fix problem of accents with new Win32 code.
1061 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1062 works in the MinGW build with the exception that there
1063 is a problem with accented characters -kes i.e. there is
1064 some mapping problem with wide characters.
1065 kes The code no longer compiles with Microsoft VC++.
1067 kes Start implementing Christopher's St.Bernard code.
1068 kes Add Christopher's mods for opening files.
1069 kes Strip \r \n from Win32 error messages (Christopher)
1070 kes Add more info about Win32 system if unknown (Christopher)
1071 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1072 kes Fix a number of incorrect strings marked for translation, when
1073 they should not be (e.g. commands).
1074 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1075 Patches supplied by user in bugs #608 and #599.
1076 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1077 listing. This fixes some problems with Win32 printing incorrect
1079 kes Correct the clock shift comm time calculation between the DIR
1080 and the FD. It was added rather than subtracted.
1081 kes Strip all backslashes in filenames to be restored on Win32
1082 machines -kes the names should all be in Unix format, and if
1083 there are any backslashes it is most likely due to an improper
1084 FileSet definition, and the files will not otherwise be
1086 kes Remove lib/regex.c (replaced by bregex.c).
1087 kes Delete src/win32/License.txt
1088 kes Modify installer to install LICENSE
1090 kes Fix bug in build-win32-cross-tools script reported by Howard
1091 kes Implement cross compiled bconsole
1093 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1094 kes Write first cut of README.mingw32
1095 kes Add back ua_label barcode fix from Rufolf Cejka.
1096 kes Integrate the majority of the Mingw cross-tools submission
1097 made by Howard Thomson. Everything compiles, with zlib, openssl,
1098 and VSS turned off. Linking needs a pthreads library ...
1100 kes Add 'Dir Status' button to the gnome console.
1101 kes More work on migration.
1102 kes Restore non-compatible base64 coding to permit compatibility.
1103 kes Display heap stats in Storage daemon without debug level.
1105 kes Integrate most of the MinGW changes -kes more to do.
1107 kes Implement using pg_config for finding PostgreSQL files.
1108 Fixes bug #600. Patch supplied by user.
1109 kes Remove -t option from mktemp in mtx_changer.in and use
1110 working directory. Fixes bug #578.
1111 kes Update job start time after the any run before job so that
1112 files created by the script are only backed up once. Fixes
1114 kes Strip trailing newline only from filenames entered in
1115 the restore command when reading a file. This permits
1116 the user to enter filenames with trailing spaces. Fixes
1117 bug #549. The user supplied a patch that I modified slightly.
1118 kes Use the most recent time (st_mtime, st_ctime) in the dir
1119 command in restore. This gives the user a better idea of what
1120 the newest file really is. This fixes bug #574. The fix
1121 was suggested by the user.
1122 kes Implement a compatible version of base64. This permits external
1123 programs to duplicate Bacula's base64 algorithm using standard
1124 routines. This fixes bugs #296, and 565. Patch submitted by
1126 ================= Note ========================
1127 Previous Signatures stored in the database are no longer
1128 compatible with this. The main downside is for Verify jobs,
1129 and doing an InitCatalog run will fix the problem. Also, the
1130 authentication between the deamons is changed, so all daemons
1131 must be simultaneously upgraded.
1132 ==============================================
1133 If you don't like this fix, set:
1134 const bool compatible = true;
1136 const bool compatible = false;
1139 kes Ensure that DB signature is never NULL.
1140 kes Ensure that DB table names are not translated.
1141 kes Fix scheduler to handle time skew (eg daylight savings).
1142 kes Fix scheduler to use lock_jobs() to avoid most problems
1143 with reload. Window is now milliseconds.
1145 kes Apply patch from Christopher Hull
1146 kes Allow multiple connections to database with different
1148 kes Invalidate the scheduler when doing a reload. Fixes seg
1149 fault, but still 60 second window.
1150 kes Additional info in Reschedule message.
1151 kes Use set_jcr_job_status() everywhere to prevent loss of
1153 kes Display peer IP in FD if error from connecting DIR.
1154 kes Don't increment file count for DIRBEGIN.
1155 kes Replace illegal characters in Win32 filename by _.
1156 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1157 kes Hash hard link filenames rather than linked list.
1158 kes Fix for security failure in chdir on Win32.
1159 kes Add CreateDirectoryA/W win32 API entry points.
1160 kes Add /silent option to Win32 FD for Install/Remove service.
1161 kes Always print Heap statistics in FD.
1163 kes Remove the -f option from the chown in Makefile.in for more
1165 kes Change setting the group in Makefile.in to use chgrp for
1167 kes Implement a write_store and read_store to replace
1168 dirstore in reserve.c
1169 kes Implement a Bacula read/write lock for Python rather
1170 than using the Python lock to avoid recursive problems.
1171 kes Correct the uninstall directory names in filed/Makefile.in
1172 as reported by a user.
1174 kes Correct some problems with database creation (new tables).
1175 kes Replace a bunch of old 0x%x by %p.
1176 kes Get first cut of Migration with Job selection working.
1178 kes Change store_bit() to store_bool() for the Spooling in
1179 dird_conf.c -kes bug reported by Robert Nelson.
1181 kes Correct Makefile bug found by Dan Langille.
1183 kes Correct Makefile for Solaris /bin/sh
1184 kes Correct mtx-changer.in for Solaris /bin/sh
1185 kes Abort if a conf resource does not have a Name =
1187 kes Change the name of the regex program to bregex.
1188 kes Add the bwild program to the tools directory. It is similar
1189 to the bregex program.
1190 kes Implement create bregex.h and bregex.c in src/lib from the
1191 Python regexp program.
1192 kes Use the new bregex.c to implement Regex expressions on Win32.
1194 kes More work on migration.
1195 kes Implement wild program in tools directory for testing
1196 wild-cards. Almost identical to the regex program.
1197 kes Up port VSS single thread locking code.
1198 kes Replace N_(..) by NT_(...) to inhibit translation of
1200 kes Modify Makefile to change the permissions on Working Directory
1201 to 770 if the directory is created.
1202 kes Do not fail the Makefile if changing the permissions or
1203 owner/group on WorkingDir fails.
1204 kes Remove early selection of Scratch Volumes in the recycling
1206 kes Correct the old recycling algorithm so that Scratch Volumes
1207 are selected when looking for a Volume in the changer.
1208 kes Correct a typo in the Verify SQL reported by Joe Park.
1210 kes Remove automatic case folding on Windows FDs. You must
1211 explictly use the 'Ignore Case = yes' option.
1212 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1213 scratch volume in an Autochanger early in the 'recycling'
1216 kes Make weof() and clrerror() methods of class DEVICE.
1218 kes Tweak license to include Microsoft restrictions.
1219 kes Move mysql.reconnect to after real_connect(). Thanks to
1220 Frank Sweetser for the patch.
1221 kes Disallow a backslash in a File = directive (Windows junk)
1222 unless the string is quoted.
1223 kes Apply Eric's patch to ua_label.c so that daemon protocol
1225 kes Add NT_ definition for strings that should not be translated.
1226 kes Apply NT_() to ua_label.c
1227 kes Remove timed wait for VSS on Win2K3 as it is not yet
1229 kes Correct bacula.in script to reference bacula-ctl-xx in the
1230 sysconfig directory rather than the bin directory.
1232 kes Fix a long standing bug in the bacula start/stop scripts.
1233 kes Attempt to add the new bacula-ctl-* files to the rpm.
1234 kes Switch to using typeof() for list traversing to avoid
1235 as many FC5 g++ compiler warnings as possible.
1237 kes Split the bacula start/start script into four files:
1238 bacula -kes starts and stops calling other scripts
1239 bacula-ctl-dir -kes starts/stops the director
1240 bacula-ctl-fd -kes starts/stops the File daemon
1241 bacula-ctl-sd -kes starts/stops the Storage daemon
1243 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1244 kes Correct editing of JobId from int to int64 in fd_cmds.c
1245 kes Eliminate FileSet name race with bash_spaces() and multiple
1246 threads by bashing in a local.
1247 kes Fix error return from 'use storage' to print a correct error
1248 message rather than nothing.
1249 kes Correct false re-read last block error message when two jobs
1250 are simultaneously writing at the end of a tape.
1251 kes Simplify exit conditions in the reserve.c code to avoid
1252 possible non-release of reservation_lock().
1253 kes Suffle lock order in reserve to avoid deadlock between
1254 reservation lock and device mutex.
1256 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1257 tracking this down for me !!!! as it broke the Win32 build.
1259 kes Integrate addition of line count limitation to bsmtp -l from
1260 Sebastian Stark <stark at tuebingen.mpg.de>
1262 kes Implement regex test program in tools directory.
1263 kes Attempt to fix time problem with bsmtp with foreign langs.
1264 kes Add strip_trailing_newline() submitted by user.
1265 kes Implement regex matching in migrate.c
1267 kes Fix bug #537 to allow arbitrary time to mount a volume for
1268 restore, if polling is turned on.
1269 kes If dir_user or dir-group is specified in ./configure apply it to
1270 the working-dir. Fixes bug #533.
1271 kes If rescheduling a job cancel the previous incarnation with the SD.
1272 Fixes bugs #566 and 557.
1273 kes Fix bug #567 do_message() definition type conflict.
1276 kes Add more jcr methods and make mutex and use_count private.
1277 kes Create lock/unlock methods for jcr.
1278 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1279 records to get to seek position.
1280 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1281 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1282 terminates correctly by doing pthread_kill(). Do not destroy
1283 SD cond wait variable between executions of the job. Use local
1284 mutex for cond variable to avoid blocking jcr chain. Fix poor
1285 use of jcr use count in jobq.c for restarted jobs.
1286 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1287 lib/jcr.c -kes prevents locking the jcr chaing.
1288 kes Apply patch from bug #564, which corrects listing volumes with
1289 multiple autochangers. Apply same fix to next volume list.
1290 kes Fix bug #562 where restore bootstrap file is not unique.
1291 kes More details in implementing David's migration syntax proposal.
1292 kes Save and restore dcr when swapping drives so that if we have
1293 a write dcr it is not lost.
1294 kes Use new routine lock_reservations() to lock the reservations
1295 system, and call it while looking for a volume in askdir.c.
1296 This could possibly fix bug #543.
1297 kes Stop SD command loop if job is canceled.
1300 kes Remove old code from findlib/create_file.c
1301 kes Rename mac.c migrate.c
1302 kes Add user friendly display of VolBytes in job report.
1303 kes Rename target... to previous... to make it a bit easier to
1305 kes Add selection type and selection pattern to Migration (idea
1306 given by David Boyes).
1309 kes The po files should now be current.
1310 kes Fix new sql_use_result() code to properly release the
1311 buffers in all cases.
1312 kes Use the keyword ujobid to mean the unique job id; job or jobname
1313 to mean the Job name given on the Name directive, and jobid to
1314 be the numeric (non-unique) job id.
1315 kes Allow listing by any of the above.
1316 kes Add the user friendly job report code for reporting job elapsed time
1317 and rates with suffexes from John Kodis <kodis at comcast.net>.
1318 kes Add Priority and JobLevel as Python settable items.
1319 kes Use TEMPORARY table creation where the table is created by
1321 kes Add new code submitted by Eric for waiting on specific jobid.
1322 kes Add ACL checking for the dot commands.
1323 kes Fix restore of writable FIFOs.
1324 kes Fix a bug in bpipe where the string was freed too early.
1326 kes Modify the Python class examples to inherit object -kes new way
1327 of defining classes. Patch from Felix Schwarz.
1328 kes Implement jobuid to replace old usage of job in keywords as
1329 suggested by Eric Bollengier.
1330 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1331 wait (wait for all jobs to stop)
1333 wait jobuid=unique id
1335 kes Implement write variables for Python to set Priority (anytime), and
1336 Job Level, only during JobInit event.
1338 kes Fix the block listing bug pointed out by Arno.
1339 kes Update the po files at Eric's request.
1341 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1342 accept time qualifiers.
1343 kes Make catalog respect ACL.
1344 kes Add recycle count to Media record.
1346 Changes to 1.39.6-beta1 24Feb04
1348 kes Add Rudolf Cejka's new rc-chio-changer.
1349 kes Implement pulling Volume from Scratch Pool if the
1350 Volume is in the autochanger.
1351 kes Implement additional command arguments for update Volume.
1355 kes Back port changes to 1.38.5
1356 kes Fix recycle SQL for StorageId.
1357 kes Fix misplaced quote in mtx-changer script.
1359 kes Note. Your database must be updated, or you must create
1360 a new database. I have not yet incremented the database level.
1361 kes Add Location table.
1362 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1364 kes Implement create/get mac record in database for adding extended
1365 Migration data to the job record.
1366 kes Add new MAC table to update/make database scripts.
1367 kes Return Storage name used when getting VolumeNames for a job.
1368 kes Change bsr file keyword Storage to Device, which is more accurate.
1369 kes Ensure that Mac records are pruned/purged.
1370 kes Tweak SD tools to deal with changing media type.
1371 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1372 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1373 that the subroutine can switch devices, and hence dcrs.
1374 kes Modify the multiple MediaType read code to re-use the same
1375 dcr when switching devices. This makes the code much more
1377 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1378 from a table for restore.
1379 kes Add Storage name to VolParams, but it really should be Device.
1381 kes Add disk-changer to scripts directory + configure/Makefile
1382 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1383 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1384 kes Implement new store_bool that stores in a bool.
1385 kes Add true/false to yes/no conf directives.
1386 kes Make first cut at changing appropriate store_yesno to store_bool.
1387 kes Complete implementation of Pool storage devices.
1388 kes Move starting clones to job.c
1389 kes Move create_restore_bootstrap_file() to job.c
1390 kes Make copy_storage() more general to be able to handle
1392 kes Cleanup a lot of migration code for manual running, including
1394 kes Move getting a scratch Volume into a subroutine.
1395 kes Make all places a Volume that is added to a pool to
1397 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1398 kes Fix segfault in restore command when no value specified.
1399 kes Start adding code to handle multiple MediaTypes in restore.
1400 kes Eliminate race condition in getting Volume name for
1401 two drive autochanger.
1402 kes More debug code in autochanger.
1403 kes Add storage keyword to bootstrap file, add parsing.
1404 kes Move slot in bsr file into Volume record as there will be
1405 a different slot for each Volume.
1406 kes Create reserve.h
1408 kes Implement Pool storage overrides.
1410 kes Implement first cut of Migration.
1411 kes Implement mysql_use_result() from patch by Karl Hakimian.
1412 This reduces significantly the memory consumption during
1413 the restore tree building, and hence runs faster too.
1414 kes Implement StorageId patch supplied by user (reggie) in bug
1415 #536. This should permit Bacula to work correctly with two
1417 kes Implement Job listing variations suggested by a user.
1418 kes Move updating bootstrap code in backup.c to subroutine
1419 update_bootstrap_file().
1420 kes Add new job status elapsed time and bytes written user
1421 friendly job report output patch sent by John Kodis
1422 <kodis at comcast.ne>.
1423 kes Implement a storage list in Pools.
1424 kes Separate out setup_job() code from run_job().
1425 kes Get migration working -kes lots of changes in mac.c in both
1427 kes Apply patch from user (Eric Bollengier I think) that fixes a
1428 DIR crash when no arguments are supplied to a dot command.
1429 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1430 kes Fix command arg name->volume in label command of gnome-console.
1431 kes Fix SD acquire.c to release correct DCR by explicitly testing
1432 on the dcr address rather than trying to devine if it is a read
1433 or write dcr. This failed in error conditions when the device was
1437 kes Apply user supplied patch for more readable rate output
1439 kes Continue implementing migration.
1440 kes Implement support for removable filesystems in SD.
1441 kes Ensure that btraceback scripts can be read by anyone.
1442 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1443 kes Correct bug where canceling restore before the FD contacts
1444 the SD causes the drive to be left in read mode.
1445 kes Move ofline_or_rewind into DEVICE::close().
1446 kes Eliminate close_device.
1447 kes Convert several dev subroutines to methods (e.g. bsf,
1449 kes Eliminate force_close_device().
1450 kes Implement Device Type directive in Device resource that
1451 can have values File, Tape, Fifo, DVD, or Prog.
1452 kes Add has_cap() method to Device.
1455 kes Add patch from bug #527 to allow RedHat user to specify
1456 options/user/group for starting each daemon in
1457 /etc/sysconf/bacula.
1459 kes Add two new queries to query.sql provided by Arno. One
1460 list volumes known to the Storage device, and the other
1461 lists volumes possibly needing replacement (error, ...).
1463 kes Add periodic (every 24 hours) garbage collection of memory
1464 pool by releasing free buffers.
1466 kes Correct bug counting sized (for display only) in smartall.c
1467 kes Print FD mempool stats if debug > 0 rather than 5.
1469 kes Make db_lock() mutex error fail the job rather than abort
1470 Bacula. Canceling the job caused the mutex to fail.
1471 kes Correct bug in alist.c that re-allocated the list if the
1472 number of items goes to zero.
1473 kes Move the reservation system thread locking to the top level
1474 so that one job at a time tries all possible drives before
1476 kes Implement a reservation 'fail' message queue that is built
1477 and destroyed on each pass through the reservation system.
1478 These messages are displayed in a 'Jobs waiting to reserve
1479 a drive' list during a 'status storage='. Note, multiple
1480 messages will generally print for each JobId because they
1481 represent the different problems with either the same drive
1482 or different drives. If this output proves too confusing
1483 of voluminous, I will display it only when debug level 1
1484 or greater is enabled in the SD.
1486 kes Add enable/disable job=<job-name>. This command prevents
1487 the specified job from being scheduled. Even when disabled,
1488 the job can be manually started from the console.
1489 kes During 'update slots' clear all InChanger flags where the
1490 StorageId is zero (old Media records).
1492 Beta release 1.38.4:
1494 kes Fix autochanger code to strip leading spaces from returned
1495 slots number. Remove bc from chio-changer.
1496 kes Back port a bit of 1.39 crypto code to reduce diffs.
1497 kes Fix first call to autochanger that missed close()ing the
1498 drive. Put close() just before each run_program(). Fixes
1501 kes Add PoolId to Job record when updating it at job start time.
1503 kes Pull in more code from 1.39 so that there are fewer file
1504 differences (the new ua_dotcmds.c, base64.h, crypto.h
1505 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1506 util.c. Aside from ua_dotcmds.c these are mostly crypto
1508 kes Implement new method of walking the jcr chain. The
1509 incr/dec of the use_count is done within the walking
1510 routines. This should prevent a jcr from being freed
1511 from under the walk routines.
1516 kes Start implementing Verify list output.
1517 kes Move the suitable_drive flag to a better place to prevent
1518 premature termination of the reservation if all drives
1519 are busy -kes should fix Arno's diff/inc pool failures.
1521 kes Add mutex to single thread VSS code in Win32.
1523 kes Simplify code in askdir.c that waits for creating an appendable
1524 volume so that it can handle multiple returns from the wait
1526 kes Modify the wait code to permit multiple returns.
1527 kes Return a zero when 'autochanger drives' is called and
1528 it is not an autochanger.
1529 kes Make rewind_dev() a method taking a DCR as an argument.
1530 This permits closing and reopening the drive if the
1531 rewind fails as happens if the drive was loaded while the
1532 file descriptor was open. This refreshes the file descriptor.
1533 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1534 if the device is open or not. This should eliminate
1536 kes Return error if reserve cannot find at least one suitable device.
1537 kes Make wait_for_sysop() return correct state information.
1538 kes Fix Win32 state file problem. write was not using compat
1539 code. This should fix bug #500.
1541 kes Modify gui on command to set only GUI mode and not batch.
1542 kes Modify .messages command to always print messages regardless
1544 kes If GUI mode is on, suppress automatic printing of
1546 kes Delete old bnet packet code.
1547 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1548 wx-console. -kes not implemented because bconsole must be updated.
1549 kes Modify restore command in wx-console to set gui on and to use
1550 only .messages instead of messages. Hopefully this fixes bug
1552 kes Fix seg fault in exit of acquire when canceling a job --
1553 reported by Wolfgang Denk
1554 kes Pull in latest reservation system changes from 1.38
1555 kes Make .messages command always print messages regardless
1556 of the automessages flag.
1558 kes Fix seg fault if user labels a drive directory bug #513
1559 kes Remove quotes around Version as it breaks things.
1561 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1562 kes Apply sparse code fix for raw drives and fifos. Bug 506
1563 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1565 kes Correct reservation system to do a last ditch try
1566 for any mounted volume, then anyone anywhere.
1567 kes Add quotes around table Version because of
1568 error in MySQL 4.1.15 -kes bug report submitted.
1569 kes Correct some minor problems with btape in the fill
1571 kes Updates to ssh-tunnel from Joshua Kugler.
1572 kes Added a report.pl program from Jonas Bjorklund.
1573 kes Simplify the O_NONBLOCK open() code for tape drives,
1574 and always open nonblocking.
1575 kes Do not wait for open() if EIO returned (shouldn't happen).
1576 kes Eliminate 3 argument to tape open().
1577 kes Correct the slot # edited in the 3995 Bad autochanger unload
1579 kes With -S on bscan (show progress) do not divide by zero.
1581 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1582 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1583 kes Remove unused code in wait_for_device.
1584 kes Make wait_for_device() always return after 60 seconds of wait.
1588 kes Add stubs for non-crypto build.
1590 kes Use localhost if no network configured
1592 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1593 kes Remove debug print.
1594 kes Add bail_out in error during state file reading.
1596 kes Merge changes made to 1.38.3 into HEAD
1597 kes Add stubs for pygtk-console code
1598 kes Create Makefile.in for pygtk-console code
1600 kes Merge updates into 1.38 branch
1601 kes Update specs to include mysql4 define.
1602 kes Fix when attributes are sent, must be after binit().
1603 kes Stop read_record() if status not ok in second loop.
1604 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1605 and partial records in read_record(). This allows bscan
1606 to get FileIndex at EOT correct.
1607 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1609 kes Fix Win32 built to work with new crypto code.
1610 kes Apply patch supplied by user (slightly modified) to fix
1611 correct detection of holes in block devices and FIFOs.
1613 kes Apply patch supplied by user (slightly modified)
1614 to fix SD hang with multiple pools and bad client
1615 IP. Fixes bug # 508.
1617 kes Add nagios plugin to the examples directory. Submitted by
1619 kes Remove warning message about multiple saves of hardlinked files
1620 from find_one.c as it can generate too many warning messages.
1621 kes Modify most restore error messages to be queued so that they
1622 appear at the end of the job rather than mixted with the restore
1623 listing where they could be 'lost'.
1625 kes Reset timeout values before select() per patch from
1626 Frank Sweetser for problems with non-blocking sockets.
1627 kes Unlink the state file if either reading or writing it gets
1628 errors. Hopefully this will fix Win32 exit problems.
1629 kes Add sanity check in append.c to ensure that dcr is not NULL.
1630 This can happen if multiple drive autochanger SCSI control
1631 channel and drive indicies do not correspond.
1633 kes Get next volume from Scratch pool before creating a volume.
1634 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1635 kes Remove argument from create_bacula_database for SQLite as it
1637 kes Add back index code so that two drive autochangers can get
1639 kes Change a bunch of debug levels to aid debugging autochangers.
1640 kes Fix reservation so that mutexes are properly applied.
1641 kes Rework reservation algorithm so that two drives can be used
1644 kes Landon merged his data encription changes into the HEAD
1645 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1646 If this patch is applied, the number of days can be specified with
1647 'list nextvol days=xx'
1649 'status dir days=xx'
1650 My use case is to be able to preview the next scheduled job (and the
1651 next tape to be used) on fridays if there are no scheduled jobs during
1655 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1656 kes Fix malformatted bnet error message that caused seg fault
1658 kes Applied user patch to improve README.vc8 in src/win32.
1660 kes Add Migrate, Copy, Archive Job types (some where there)
1661 kes Correct some more editing of JobId's (for 64 bit compatibility).
1662 kes Ensure that StorageId is stored in Media record when ever possible.
1663 kes Add Migration Job to Job.
1664 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1665 Next Pool to Pool resource.
1666 kes Add more code to mac.c (migration archive copy).
1667 kes Change Start Storage daemon job to require read and write storage
1669 kes Pass read storage data to SD as well as write storage data.
1670 kes Remove old code from winservice.cpp
1671 kes Break on error in scan.
1672 kes Fix typo in signal.c
1673 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1674 kes Cleanup how find_device() works.
1675 kes Add read output to Status in SD.
1678 kes Add red-black btree routines
1680 kes Remove abs() in bfile.c so that it compiles on Solaris.
1683 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1684 kes Fix bnet-server bug found on OpenBSD. Bug #486
1685 kes Fix cancel failure bug. Bug #481
1686 kes Fix failure when Pool name has spaces. Bug #487
1687 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1688 kes Fix a couple of free()s in src/filed/acl.c
1689 kes Fix memory overrun in bfile.c in building OS X resource
1690 fork filename. Bug #489
1691 kes Add Pool name to SD status output.
1693 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1694 kes Make sure to set storage before trying to set drive.
1695 kes Add bacula_mail_summary.sh to examples directory. It makes
1696 a single email summary of any number of jobs. Submitted
1698 kes Make sure when we do a mount to unblock the device even
1699 if the drive could not be opened.
1701 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1702 and correct a few minor problems to make it build on Linux.
1704 kes Remove delete of CVS from all Makefiles
1705 kes Fix seg fault when clicking on Add button in wx-console
1706 restore panel. Bug #470.
1707 kes Fix copyright date and URL typo -kes bug #468.
1708 kes Change autostart install for FreeBSD to look for rc.conf
1709 rather than rc.local as suggested fix for bug #466.
1710 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1711 grant on status. Bug #465
1712 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1713 update script. Bug #464
1714 kes Tweak #ifdefing a bit in new Win32 stream code.
1715 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1716 kes Add documentation of performance #defines