1 Technical notes on version 2.2.x
5 kes Permit multiple simultaneous restores -- experiment.
7 kes Backport development stream SD reservation system changes.
11 kes Move final volume swapping code to DCR method and
12 call it from acquire_for_read().
13 kes When wrong volume is mounted during read, unload_autochanger.
15 kes Stop searching for Volumes in SD askdir if DIR returns the
16 same volume name twice in a row.
18 kes Tweak the swap Volume from one drive to another code so that
20 kes Resolve several problems with recycling that broke the new
21 code (these problems are in 2.2.9 as well).
22 kes Remove the volume lock when calling the sysop code.
23 kes Don't mark a reserved volume with no writers as unused otherwise
26 kes Rework class structures for VOLRES, DCR, and DEVICE to make
27 the method names a bit more logical, and for more logically
28 handling the responsibilities.
30 kes Remove redundant code in terminating the scheduler that just
31 causes a seg fault in many cases.
32 kes Cleanup releasing a volume and make it a DCR method.
33 kes Improve algorithm for detecting pre-reserved volume and
36 kes Tweak volume swapping code so it works.
37 kes Correct name overloading in mount.c
38 kes Replace released flag in VOLRES with reserved and add access
39 methods for the VOLRES class.
40 kes Prevent volume from being released while being swapped.
41 kes Refactor parts of stored/mount.c
43 ebl Add sanity checks for VolWriteTime and VolReadTime
44 ebl Take care of bad clock changes while computing VolWriteTime
45 and VolReadTime. This should fix or limit #1066
46 kes Correct error string numbers in dird/catreq.c
47 kes Restructure reserving, acquiring, and mounting volumes. Calls to
48 autochanger are deferred for mount.c -- simplifes the code.
50 kes Do not prune any running job. It just fails the job.
51 kes Lock the volumes when changing dev->reserved_device and marking
52 the volume unused otherwise the device can get reserved by
53 another job before the volume is released, thus blocking it.
56 Beta Release Version 2.2.9-b7
58 kes Close bat console windows first to eliminate error message
60 kes Remove useless code in Scheduler that causes seg fault on
62 kes Correct some SD catalog request error messages.
63 kes Don't allow pruning of any running job.
64 kes Turn off code in read_record that causes a seg fault in the SD
65 when reading past an EOS_LABEL.
66 kes Turn off unloading the autochanger in reserve.c as it just
68 kes Lock volumes when unreserving a device.
69 kes Do not mark volume unused when recycling.
70 kes When acquiring, don't mark volume unused if it is reserved (busy).
72 Beta Release Version 2.2.9-b6
74 kes Eliminate ./configure warning on po directory
75 kes Fix bug #1063, reuse of freed ptr in list nextvol.
76 kes Release regex compile buffer in filed/job.c
77 kes Add proper type of const char in sql_create.c
78 kes Turn off debug in daemon termination routines
79 kes Move free_volume_list() before devices are freed in stored.c
80 kes Fix reference to uninitalized stack variables in bregex.c.
81 This should correct bug #1067.
83 kes Fix possible seg fault in SD when freeing a volume entry.
85 kes Apply patch from bug #1069 that corrects spurious error messages
86 when ACLs enabled on SGI but no ACL exists.
87 ebl Fix a storage deamon segfault at debug level 500.
89 Beta Release Version 2.2.9-b5 -- not released
91 Beta Release Version 2.2.9-b4
93 kes Re-enable code to remember last volume mounted on a non-tape
95 kes Add patch supplied in bug #1068 that fixes a SD crash when using
96 a Virtual autochanger.
97 kes Generate correct JobMedia records during spooling/despooling when
98 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
99 <tih@hamartun.priv.no> for excellent analysis and testing.
101 Beta releae version 2.2.9-b3
103 kes Rework certain SD locking based on gdb tracebacks of deadlocks
104 sent by Eric. This code now uses only the volume_lock() rather
105 than the reservations lock when at EOM and acquiring a new
107 kes Ensure only one exit point in several subroutines.
109 Beta release version 2.2.9-b2
111 kes Fix to initial tape drive open to release the volume name
113 Beta Release Version 2.2.9-b1
115 kes Fix to JobMedia fix.
116 kes Fix bug pointed out by Peter Much that causes the StorageId to
117 be updated when reading a tape (during migration, it could have
118 been incorrectly set to the write StorageId).
120 kes Implement autostart scripts for Debian
122 kes Fix mtx-changer.in for broken Debian mt program.
124 kes Massive commit of all fixes and back ports to create 2.2.9
126 kes Apply doc fix from bug #1062.
127 kes Resolve crash and improper restore wx-console Win32 restore
128 GUI. Fixes bug #1065.
129 kes Update Win32 wxWidgets to latest version.
130 kes Attempt to do correct handling of Win32 mount points. Should
132 kes Fix Win32 FD backup/restore memory leak due to improper termination
133 of BackupRead/Write. This fixes bug# 1038.
134 kes Add const to AIX prototype for initgroups()
136 kes Undo bug #1047 heap overrun fix as it is not correct.
138 kes Fix creating first JobMedia record during Migration to include
139 proper index. This caused slow restores of migrated jobs.
141 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
142 and do not strip paths on symbolic links.
143 kes Set catalog backup database and user name from values specified on
144 the ./configure line.
145 ebl Apply patch to correct bug #1031, about wrong pool source information
148 Release Version 2.2.8
150 kes Apply patch from Martin to correct bug #1040, bscan sets existing
152 kes Fixed important spelling error in doc -- bug #1045.
154 kes Move initialization of read/write res lock earlier in the code.
155 This fixes the crash with a null conf file. This fixes bug
157 kes Redefine CURES in lib/parse_conf to be URES and move it all
158 into lib/parse_conf.c -- this responds to bug #1042, but does
159 not fix it. The fix is not to compile with FORTIFY_SOURCE.
160 kes Backport fix de-referencing a NULL pointer in the scanner from
161 the trunk SVN. I don't think this was reported as a bug.
163 Beta release Version 2.2.8
165 kes Re-enable the new job code editing (%f).
167 kes Fix bsnprintf for float point numbers. I broke recently when
168 parameterizing some variables.
170 kes Move Heartbeat documentation from Job to Director resource.
171 This fixes bug #1033.
173 kes Fix existing switch drive SD code to call autochanger to release
174 any old volume. This must be done to keep the autochanger from
175 releasing subsequently newly reserved volumes in doing a close().
176 This should possibly fix bugs #1032 and #1018.
177 kes Apply big backport of current SVN SD code that corrects a number
178 of race conditions. This is a first step in fixing bug #1018.
180 ebl Fixes bug #1028 where "Selection Type" option was not usable
184 Release Version 2.2.7
186 kes Partial back out (disabled) %f job code editing because it
187 does not build on Win32.
188 kes Fix seg fault Frank Sweetser reports in regression testing
189 on his systems. The problem was that the original author of
190 bsnprintf.c did not take into account the side effects of
191 using ++x in the argument to a #define.
193 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
194 that implements double quoting include names in conf files,
195 and also allows piping input by having the first character
196 be a vertical bar (|).
197 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
198 that implement %f in RunScripts to pass the FileSet name.
199 kes Skip leading | when lex input comes from a pipe as suggested
200 by Michael Stapelberg <michael@stapelberg.de>.
202 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
203 Nerijus Baliunas <nerijus@users.sourceforge.net>
205 kes This patch corrects a problem where the maximum concurrent storage
206 jobs counter gets out of sync during restore jobs causing jobs to
207 'wait on max Storage jobs'. This patch fixes bug #1009.
209 kes Add new include to postgresql.c suggested by Marc Cousins so
210 that it compiles correctly with pgre version 8.3. Also fix
211 misuse of %x with pointer (should be %p).
213 kes This patch fixes bcopy so that it produces correct Volumes.
215 kes This patch eliminates spurious output to the console during a VerifyVolume
216 job that contains encrypted data. It fixes bug #1024.
218 kes This patch prevents the 'status dir' command from trying to use a scratch
219 volume and possibly moving it from one pool to another. This patch fixes
222 kes Fix --archivedir addition to configure. Replace it with
223 --with-archivedir in configure.in This fixes the regression
225 kes This patch fixes bug #1012 where the job is canceled because
226 of Max Run Time exceeded when the job has not yet started.
228 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
229 one 'part' to write. Instead of each part being stored on disk,
230 written to DVD, then deleted from disk, all parts are written to disk,
231 and only the last is written and deleted from disk.
233 kes Correct typos in disk-changer.in
235 kes This patch fixes the status command to include the formating string for
236 JS_AttrInserting. It fixes bug #1021.
237 kes This patch should fix the Mac OS X build problem on the latest
238 Darwin, where sys/types.h was not included correctly (apparently
239 due to a change in the Mac headers). The solution was to explicitly
240 ensure that it is defined for the ./configure.
241 This patch also has a rebuild of configure that includes the Debian
242 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
243 kes This patch should ensure that queued messages to the console are
244 displayed as soon as possible. It should fix bug #1007, but has been
245 reported not to work.
247 kes This patch fixes the infinite loop when trying to increase the
248 maximum number of volumes in a Pool during the add command.
249 This patch fixes bug #1008.
251 Release Version 2.2.6
253 kes Get fix for joblist bug in bat from trunk.
255 kes This patch fixes bug #1003 where putting the message output from
256 a Verify job into the catalog results in a recursive loop. The problem
257 seems to show up only with postgresql (to be verified).
259 kes Fix bug #942 where lots of emails where generated when the heartbeat
260 interval was low and Bacula wanted a different tape from the one in
263 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
264 which was updated during a restore (or a reading migration) bug #982
266 ebl Use qmake-qt4 instead of qmake when available (debian system).
268 kes Add a security warning to src/cats/make_catalog_backup.in indicating
269 that passing the password via the command line (arg 3) is insecure.
270 This responds to bug #990 (it doesn't fix it).
271 kes Apply 2.2.5-postgresql-errors.patch
272 kes Remove unneeded File table index on JobId, which is already
273 present as the first index of another multi-index.
275 kes Set default debug_level to zero. This corrects bugs #991 and #993.
276 kes Fix a crash in bat when it cannot connect to the Director for example
277 if the Director is not running.
279 kes Activate Close button on tray-monitor window. This fixes
282 kes Fix spurious warning message printed when creating a volume with
283 a LabelFormat. This fixes bug #976.
285 Release Version 2.2.5
287 kes Add JobId in place of Job name in all the Jmsg() output.
288 kes Correct the APP_DESC for the Win32 storage service (remove an e).
290 kes Add new SD despooling attributes and Dir inserting attributes
291 job status codes. This fixes bug #961.
292 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
294 kes Fix doc issue. This fixes bug #963.
295 kes Fix listing performance problems in bat. Pointed out by
297 ebl Fix replace on restore. This fixes bug #969
298 kes Fix bat code that tests for Win32. This should fix bug #968
299 kes Query 5 list wrong Vol after migration. This fixes bug #960
301 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
302 in back porting from 2.3.x
304 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
305 The details are included in the notes in this file.
307 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
308 messages; it fixes a problem opening the SQLite3 database when multiple
309 simultaneous jobs were running; it fixes a bug with certain versions of
310 MySQL where batch inserts failed because of table name character case
311 (upper/lower) differences.
312 kes Fix race condition that drops final block written to volume.
313 This happens in rare cases with multiple simultaneous jobs
314 when the Volume fills. This fixes bug #964. May be related
315 to bug #935 and possibly #903.
317 kes Fix FD->SD authorization failure, which was due to spurious
318 wakeups from a pthread_cond_timedwait(). Simply check the
319 predicate before continuing. This fixes bug #953
320 dvl Add new configuration item --archivedir
321 dvl Adjust regression tests to use tmp not /tmp. This will allow
322 multiple concurrent runs of the regression tests.
324 kes Fix race condition that drops final block written to volume.
325 This happens in rare cases with multiple simultaneous jobs
326 when the Volume fills. This fixes bug #964. May be related
327 to bug #935 and possibly #903.
328 kes Eliminate more strerror() and replace with bstrerror().
329 kes Remove BSD getopt and replace with unrestricted IBM version.
330 kes Fix Win32 build for changed calling sequences.
332 kes Fix FD->SD authorization failure, which was due to spurious
333 wakeups from a pthread_cond_timedwait(). Simply check the
334 predicate before continuing. This fixes bug #953.
335 kes Add const char where needed (more to do).
337 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
338 kes Don't overwrite error message in check_tables_version.
340 kes Unlock batch insert tables with same calls used elsewhere.
341 kes Allow starting 59 jobs a second.
342 kes Make SD session key more random.
343 kes Add retry for SQLite opening db if it fails. Probably helps
345 kes Suppress extra error messages during batch insert failure.
347 kes Put some FD auth code on dbglvl rather than fixed.
348 kes Return insert attributes error message in db msg buffer to avoid
349 false error messages. Helps fix bug #966.
350 kes Separate batch init error messages. Probably helps fix bug #966.
351 kes If Dir gets an error during inserting attributes, cancel SD.
352 This reduces unnecessary error messages.
354 ebl Cleanup batch insert code. Probably fixes bug #965.
356 kes Turn off some code when batch insert not enabled.
357 kes Edit FD name in connect error messages.
359 kes Add code to handle tray monitor separated from Win32 FD.
360 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
362 kes Fix ANSI tape labeling. This fixes bug #954.
363 kes Increase the max block size to 4MB fixes bug #957.
364 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
365 is not properly mounted (recognized) during a poll.
366 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
367 Job that has differences reports Verify OK.
369 Release Version 2.2.4
371 kes Increase size of name string when FD making connection to SD.
374 kes Add code to try to fix bug #908.
375 kes Add waits to multiple exit detection code to try to force pid
376 file to always be deleted.
377 kes Restore good dev.tar.gz to rescue set appropriate binary property.
379 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
380 trying to switch drives by checking for blocking before unblocking.
382 kes Cancel storage daemon in all cases where FD reports error. This
383 should fix virtually all cases of bug #920.
385 kes Fix error message that was clobbered when Dir tells SD it does not
386 have write permission on Volume. This should fix a minor point
387 in bug #942, but not the main problem.
388 kes Add code to cancel job in SD if FD connection fails. This should
390 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
391 kes Fix migration code to get correct Volume name with multiple volumes
392 by skipping |. Fixes bug #936.
393 kes Implement patch supplied by Landon to fix bug #944 where using
394 TLS with bconsole uses 99+% of the CPU.
395 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
397 kes Move patches into patches directory.
399 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
402 ebl Using "m" in bconsole will show messages like before,
403 and not memory usage.
405 Release Version 2.2.3
406 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
409 kes Fix bug #935, and probably also bug #903 where files were not
410 restored. MediaId was not properly set in JobMedia record after
413 kes Add ./configure search in qwt-qt4 for qwt package
414 kes Apply Martin Simmons patch that should turn off the new API usage
415 when batch insert is turned off allowing building on older
418 Release Version 2.2.2
420 ebl Detect if new PosgreSQL batch insert API is present.
421 kes Correct incorrect mempool call causing Director crash.
422 sb Update spec files for 2.2.1 release
424 Release Version 2.2.1
426 kes Update POTFILES.in
427 kes Cleanup a few underquoted AC_DEFUNs in configure
428 kes Apply patch from Martin Simmons that adds a test for va_copy to
431 kes Fix bug 921 by increasing the number of tries to create a new volume
433 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
434 can be called multiple times. Implement a version for machines
435 without va_copy() that gets a big buffer.
437 kes Integrate more portable zone offset code into bsmtp.c
438 Submitted by Attila Fülöp.
440 kes Fix bad SD->FD return status reported by
441 (James Harper) <james.harper@bendigoit.com.au>
442 ebl Fix a bug in read_close_session which return random status
443 thanks to James Harper
445 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
446 and directory names during restore of single file/directories.
447 kes Add sanity checks to .sql command when string is empty. Hopefully
448 that will resolve Dirks Director crash.
450 kes Apply patch submitted by Martin Simmons that corrects a seg fault
451 in the bsmtp chat subroutine when debug is >= 10.
453 kes Fix Director crash when running bat SQL queries.
454 kes Add David's notes on Item 8: Copy pools.
456 kes Rework projects file to be current and ready for a vote.
457 kes Enhance lex scanner error message.
459 kes Tweak LICENSE file to mention BSD code.
460 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
461 if specified on the ./configure.
462 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
463 This class is intended to allow us to open a second bsock to the
464 Director while in the restore subdialog.
466 kes Fix configure to create bat Makefile before creating dependencies.
467 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
468 kes Add a tooltip to the tray monitor.
469 dvl Set the Director's PID file before dropping privs. This fixes
472 kes Update AUTHORs file
473 kes Increase the default max concurrent jobs to 20 in FD and SD to
474 correspond with the default .conf files.
475 kes Rewrite the Win32 service routines. This eliminates the 3 copies
476 some different, of the same file created by RN when porting the
478 kes Rearrange some of the Win32 directories and the placement of the files
480 kes Set DEVELOPER flag in version.h
482 ========================================================================
483 Release Version 2.2.0
485 kes Apply a second doc patch from Marc.
486 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
487 improves the tips section that discusses how to setup multiple
490 kes Update bat README file.
491 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
492 corrects a typo in the Recycle status check in db_find_next_volume().
493 This will probably fix a number of annoying problems with multiple
495 kes Modify most of dird/msgchan.c to use bsock class calls rather than
496 bnet calls -- no functionality change.
498 kes Modify the Verify output to specify if files are missing on
499 the Volume(s) or disk. Fixes confusion in bug #916.
500 kes When more than one Volume is read in a migration job, the last
501 Volume bytes reported are from the last read volume rather than
502 the last written volume. Fixed. This fixes bug #910.
503 kes Fix display of Recycle flag after update volume=foo recycle=yes.
504 It previously printed New Recyle flag is: no. This fixes bug
507 kes Correct seg fault when switching tape drives during restore.
508 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
509 be used until after 2.2.0 release.
511 kes Remove fnmatch() in SD that permitted wild card specifications.
514 kes Fix %g in filename returned by SQL for browse tree reported by
516 kes Fix configure so that it puts config.out in the cwd rather than
518 kes Attempt to fix the locking problem reported by Eric in bug #906.
519 kes Make berrno class to leave errno unchanged after constructor call.
520 kes Make bnet_server use the heap rather than the stack to allocate
521 its socket fd pointers to avoid a crash at termination. Problem
522 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
524 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
525 and putting it in depkgs-qt along with Qt4.3.
527 kes Rework code in acquire.c that switches drives for reading when
528 the Media Type does not match. This should fix bug #906
530 ebl Fix a director segfault during job setup #907
531 kes Correct seg fault in postgresql when first operation returns no
532 rows. Fixes Dirks File browser problem seg fault with bat.
534 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
535 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
538 kes Implement PopUp YES/NO dialog for bat.
540 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
542 kes Correct RunScript to terminate job in FD on failure.
543 kes Change abort_on_error and AbortJobOnError to fail_on_error
544 and FailJobOnError in RunScripts.
545 kes Minor tweaks of code formating in RunScripts, principally to
546 avoid depassing 80 columns.
548 kes Eliminate one #ifdef Win32 in bsmtp
549 kes Implement grow tool to grow a file for testing very large databases.
550 kes Add big-vol-test to test Bacula seeking with > 5GB.
553 kes Modify find_next_volume() to return all values in Media record.
554 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
558 kes Update Release notes
560 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
561 Warning, in previous beta version, all media get from scratch keep their
564 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
565 This should fix bug #842. Made a note to look at removing the temp
566 files at the end of the install.
567 kes Add ability to mount and unmount a file device providing it is
568 marked as being removable and has the appropriate mount and unmount
569 commands defined in the Device resource. This fixes bug #830.
570 kes When applying a storage override, release all previous storage
571 definitions rather than just prepending the new storage.
572 This should prevent a good deal of confusion.
574 kes Implement ./configure search for qwt libraries.
576 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
577 Win32 FD. This should fix bug #893.
578 kes Remove an unnecessary beep in Win32 init code.
579 kes Update copyright dates in Win32 executable about boxes.
580 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
581 code with a BSD getopt.c and getopt.h.
582 kes Remove sched.h from the Win32 compat directory -- not used.
583 kes Remove the Exit menu item from the Win32 tray monitor. If you really
584 need to shut it down, do it through the services panel or the command
586 kes Remove some inappropriate Bacula FSFE copyrights.
587 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
588 kes Fix regress config non-portable test as pointed out by
589 Florian Heigl <florian.heigl@gmail.com>
590 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
591 as pointed out by Florian Heigl <florian.heigl@gmail.com>
593 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
594 Reported by Frank Sweetser.
598 kes Fix client-only build.
599 kes Integrate client-only fixes for bsys (initgroups) and conio from
600 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
601 kes Make arguments to get_scratch_volume() in same order as other
603 kes Rework the prune_volumes() subroutine so that after purging and
604 no volume found in desired pool, it will check for a scratch
605 volume. This prevents recycling the whole scratch pool.
606 kes Add code to status storage to print boffset_t (largefile support).
608 kes Move qwt (Graphics libarary for Qt4) to depkgs.
609 kes You now need a --with-qwt=<dir> to be able to build bat.
610 kes Update src/win32/cats/bacula_cats.def to include the new
611 db_get_query_dbids() call on Win32.
613 kes Correct a problem when selecting a scratch volume and moving
614 it to another pool that lost some columns.
615 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
616 kes Enhance Autochanger error messages to include Volume and device name.
617 kes Rework prune_volumes() code to take account of InChanger flag,
618 and to handle recycling volumes going to the Scratch pool and
619 current pool because the RecyclePool directive.
620 kes Implement a better and more efficient db_get_query_dbids() to
621 handle creating and passing back a list of DBIds.
625 kes Start work on new more efficient DBId subroutine. First use
626 will be for recycling volume to Scratch inchanger.
627 kes Increase number of JobIds in pruning from 1000 to 10000.
628 This to be replaced by above routine.
629 kes Begin implementation of building Qt4 on Win32.
630 kes Correct typo in fix I added for bad TLS shutdown.
631 kes Pull 2.0.3 patches into patches directory.
632 kes Update Release notes. Include qt-console in line count.
633 kes Update Projects file.
635 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
636 bug in migration code where a job that spanned two volumes
639 kes Implement new BST_DESPOOLING blocked state. Change from locking
640 during despooling in SD to blocking. This means that other threads
641 can work with the device structure, in particular the reservations
642 system while despooling.
644 kes Fix return in reservation message queue that missed clearing
645 the jcr lock (implemented 26Jun07 below).
646 kes Rename a number of dev methods to make locking function names
648 kes Document locking in lock.c. Move lock structures to new file
651 kes Move reservations message lock to lock jcr only this
653 kes Move main SD locking code into lock.c (new file).
654 kes Update Win32 build to include lock.c
658 kes Dirk committed the qwt library code for drawing graphs in bat.
659 kes Tweak install of qwt so that it is integrated with ./configure.
661 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
662 out by Eric (my typo).
663 ebl Fix configure.in to get batch mode enable
664 kes Return correct string from authenticate.cpp in bat when connecting
666 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
667 spurious line drops when using TLS.
668 kes Do not file reparse points when restoring a file that already
671 kes Implement Windows reparse points -- similar to directories, but
672 we do not descend into it. This is a first cut. They seem to
673 be backed up, but restore is not yet tested.
674 kes Remove restore_blocking in tls code when shutting a socket to leave
675 it in blocking mode. Hopefully this will fix the encryption bug
676 reported by Frank Sweetser.
677 kes When opening a file for backup, tell the OS that we are going to
678 read it sequentially -- optimization.
679 kes Change variable names in authenticate_director() to not conflict
680 with member names in bat. Caused great confusion with compiler,
683 kes Queue openssl error messages in case of comm problem.
684 kes Do shutdown() call if socket terminated.
685 kes Remove some duplicated code in tls.c
686 kes Move more of the bsock member variables into private and access
688 kes Add Frank Sweetser's tls-test to the regression suite.
690 kes Add Swedish sv.po file
692 kes Don't print clock skew message in FD if less than 3 seconds diff.
693 kes Add a bit of VSS info to status client.
694 kes Implement a first cut of Vista VSS, using Win2003 code.
699 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
700 loaded tape but uses first drive).
701 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
702 This was indeed a Win32 issue.
704 kes Simplify search of autochanger for in-use Volume.
705 kes Fix exit condition of check for in-use volume. kes Remove
706 inappropriate my_postgresql_free_result() in db_close()
708 kes Fix bad return in FD when encryption signature not found.
709 Probably caused a crash.
710 kes Inhibit missing encryption signature error messages for
711 file types where no signature computed.
712 kes Correct inverted check on autochanger in reservation system.
713 kes Tweak debug code in autochanger reservation.
715 kes Add some additional locking in the cats directory in subroutines
716 that modify packet variables called from batch insert.
717 kes Rework how dcrs are allocated. new_dcr() can now be called
718 with an existing pointer, and it will simply clean it up.
719 This allows the reservation system to test various different
720 devices, and will permit easy device changes.
721 kes A bunch of changes all over to handle new new_dcr() calling
723 kes Work more on the Volume management in the SD. Remember Volumes
724 for tape drives and for autochangers (even virtual disk changers).
725 kes When looking at the Volume list to reserve a drive, handle
726 autochanger names correctly by interating through the changer
727 devices. Also call the Director to see if a Volume is suitable
729 kes Fix some bugs in bscan. Make sure all media records are written.
730 Make sure that valid JobMedia records are written for disk files.
731 Previously they were completely wrong.
732 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
733 that the URLs don't change and so that the developers will all
734 work off the same copy. Rebuild from scrach.
735 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
739 kes Fix seg fault in FD from incorrect digest size.
740 kes Fix argument to non-OpenSSL crypto.c subroutine.
744 kes Remove a few malloc()s from the encryption code.
745 kes Use the class calls to bsock in filed/backup.c and restore.c in
746 place of the old bnet_xxx code.
747 kes Implement code that does an on the fly calculation of the
748 signing digest during restore of encrypted files. It makes
749 a best guess at the algorithm, and if it is not correct, will
750 then revert to the old code which reads the file after it is
752 kes Implement at least one missing crypto stream in stream_to_ascii()
753 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
754 #877 where a reload with bad syntax causes Dir to exit.
756 Cut: 2.1.14 beta (not released)
758 kes Do not free a volume on a tape drive until another volume is
759 mounted and read, or the autochanger unloads the volume.
760 This should help the SD re-use volumes that are already mounted,
761 and should fix bug #886.
762 kes Apply patch from user brettedgar that allows gnome2-console include
763 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
764 kes Apply patch from Lucien Weller that fixes day of week calculation
765 because of DST flag problem. Fixes bug #887.
767 kes Move find_next_appendable_volume() to after acquiring a valid device
768 in reserve.c. This fixes bug #864 -- confirmed by reporter.
770 kes Unable to reproduce bug 872. However added additional testing for
772 kes Bug #874 resolved by documenting SQLite limitations.
773 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
774 kes Bug #881 resolved by removing typo in mtx-changer script.
775 kes Made Frank Sweetser's wiki the official Bacula wiki with his
776 approval. Added a link to the wiki on the web page, and implemented
777 a backup from http://paramount.ind.wpi.edu
779 kes Fix update allfrompool to pass pool name.
781 kes Convert to pure GPL v2 license.
782 kes Fix sscanf problems reported by Peter Buschman that caused
783 a bus error on Solaris.
784 kes Rework (simplify) the select prompt in bat.
785 kes Move get_jobid_from_tid() into lib and create a
787 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
788 should definitely fix the problem of lost error messages in the
790 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
791 kes Eliminate tcpd.h from the project. Enclose the #include from the
792 library with extern C ...
793 kes Add print of signal name when a signal is trapped.
797 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
799 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
800 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
801 makes SQLit3 run 30 times faster, though a bit less safe.
802 kes Implement --with-batch-insert in configure and detection of thread
803 safe libraries. It is on by default, but turned off if no thread
804 safe library (e.g. SQLite 2) is available.
806 kes Fix Bacula PostgreSQL buffer overruns.
807 kes Do better checking for NULL results returned from PostgreSQL;
808 implement retry for failed queries; clear results buffer after
809 failed query. Hopefully this will correct the PostgreSQL failures.
811 kes Implement algorithm to handle only one appendable volume with
812 Prefer Mounted Volumes = no.
813 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
814 returned from a query.
815 kes Make volume lock recursive.
816 kes Implement an additional volume reservation algorithm that
817 starts by considering all reserved volumes then uses the
818 old brute force algorithm of searching the resources to
819 find a suitable device.
820 kes Add new reservations debug code and refine the old code.
821 kes Update the win32/dll/bacula.defs file.
823 kes Tweak reservations algorithm to permit a few more cases, i.e.
824 volume reserved, but on different drive, ...
825 kes Enhance SD status to include Pool and Media Type for drive in a
826 more readable format (a bit longer).
827 kes Fix PostgreSQL double free.
829 kes Minor refactoring of restore decryption code.
830 kes Add code to smartall.c to detect double free of a buffer.
832 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
833 so that bsmtp will create a correct email address (mailbox only).
834 kes Modify 'memory' command so that the buffers are listed as 'In use'
835 to avoid confusion with Orphaned buffers.
836 kes I reworked the OpenSSL include/lib flags to be handled in
837 the standard Bacula way, which should fix bug #863 concerning
838 non-standard OpenSSL libraries.
840 kes Implement Help Browser window for bat.
841 kes Fix reload bug that reset StorageId to zero.
843 kes Fix TLS #ifdefing when TLS turned off.
844 kes Ensure that when labelling a tape with Slot=0 that InChanger
846 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
848 kes Add StartTime to final uar_sel_jobid_temp query so that we can
849 add DISTINCT (required by PostgreSQL).
850 kes Implement BSOCK authenticate_director() method. Eventually will
851 authenicate all daemons.
852 kes Move several more functions into the BSOCK class.
854 kes Add code to tell the OS that we no longer need a cached
855 file that we were reading. In findlib/bfile.c. Also,
856 only cache files that we are reading. Thanks to
857 Tobias Oetiker <tobi@oetiker.ch> for the idea.
858 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
859 kes Implement script to automatically generate cats and dll .def
861 kes Update README.mingw32 to include new .def file generation.
862 kes Correct typo in UTF-8 error message as reported by:
863 jhernandez <julianhernandez@gmail.com>
864 kes Add additional sm_check() code on debug level 1.
865 kes Set default debug level to 1.
866 kes Trap SIGABRT in attempt to get traceback.
868 kes Reduce bat connect timeout from 30 to 15 seconds.
869 kes More restructuring and implementing BSOCK class in place of
871 kes Remove a few unnecessary malloc() tests in crypto code.
872 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
873 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
874 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
876 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
878 kes Fix Verify InitCatalog. The attributes were not pointing to the
879 correct saved location.
880 kes Implement message callback so that GUI is sure to get all
881 daemon messages. Currently displayed in a dialog in bat.
882 kes Ignore SIGUSR2 (Bacula timer) in bat.
883 kes Apply regress patch from bug #859 to allow regress to work
884 with Solaris compiler.
886 kes Begin adding TLS support to bat.
887 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
888 clean up lex.c and make it more readable.
890 kes Move more bnet functions into the BSOCK class.
891 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
892 kes Complete change of berrno strerror() method to bstrerror()
896 kes Cleanup incorrect email addresses in bsmtp.
897 kes Make bat display initial messages rather than discard them.
899 kes First cut of adding .mod to the run command.
900 kes Implement auto display of messages in bat.
901 kes Enhanced preferences to allow all Bacula output to be
904 kes Fixed bug #856 autochanger documentation.
905 kes Rework bsmtp date editing for Win32. This fixes bug #854.
906 kes Add new cats entry point so Win32 builds.
908 kes Attempt to fix bsmtp date editing on OSes without %z editing.
909 kes Do better checking for the MySQL 64 bit libraries looking for both
910 .a and .so libraries.
911 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
912 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
913 kes Require the thread safe version of MySQL during configure. Thanks
914 to Andre Noll for pointing this out.
915 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
916 continuing in migration code.
917 kes Apply implementation of tray-monitor font derived from gnome-console
918 submitted by Andreas Piesk <a.piesk@gmx.net>
920 kes Eliminate important memory loss in SQLite
921 kes Fixed the batch insert MySQL thread specific data that was not
922 being freed. See cats/mysql.c:db_thread_cleanup().
923 kes Fix restore before command.
924 kes Convert old hdr.name to name() in a few places.
925 kes Implement update jobid command.
926 kes Return all time_t dates in db_get_job_record()
927 kes Stop watchdog in SD earlier.
928 kes Put Pool just after Storage in please mount message.
929 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
932 kes Update the po files.
933 kes Fix Verify InitCatalog by making it cache attributes.
935 kes Change name bacula-bat to bat for man 1 page to correspond to
937 kes Check for client and store NULL pointers in status command. This
939 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
940 kes Fix sign extended editing of %p.
941 kes Clean out a little old #ifdefing in cats/mysql.c
943 kes If time diff between DIR and FD is more than 600 seconds convert
944 INFO message to WARNING.
945 kes Implement heap size display in status for all daemons.
946 kes Attempt to fix MySQL db open memory loss (not successfull).
947 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
948 kes Eliminate memory loss in MySQL (possibly other SQLs) during
949 Query. This looks like a MySQL but but by doing extra releases,
950 the memory goes away. This should fix bug #847.
952 kes When backup fails, cancel SD before waiting for sd termination.
953 kes If SD is waiting for FD to connect during cancel, wake up the
955 kes Fix fsf code so that errno is correctly reported.
956 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
958 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
959 the original jobb's FileSetId.
960 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
961 spooling in migration jobs. Not yet tested.
962 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
963 reading conf file from a pipe. However, do it with open_bpipe()
964 rather than popen. Not yet tested.
966 kes Fix an ugly bug where the VolCatBytes were getting updated
968 kes Implement bconsole memory command that prints current memory
969 usage, plus smartalloc dump.
970 kes Clarify some error messages in backup, admin, and migrate.
971 kes Shrink label dialog to smaller size.
972 kes Invert Cancel OK buttons on restore to be OK Cancel.
973 kes More strerror() to bstrerror() conversions.
975 kes Start implementing bstrerror() in place of strerror().
976 kes First cut at stripping path -- seems to work.
978 kes Prevent door and port files from being restored (mostly
980 kes Free an unreleased buffer in compat code.
981 kes Change console Job name from *Console* to -Console- to eliminate
982 Win32 filename problems. Put Win32 path separator when creating
983 Console file. This fixes bug #846.
984 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
986 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
988 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
989 to force Win32 error message.
991 kes First cut strip path. The data should be passed to the FD,
992 but nothing is done with it yet.
993 kes Enhance the digest and signature routines in the crypto
994 library to accept a JCR and to use it to print error messages
995 so that they will go in the Job report rather than the daemon's
997 kes Simplify some of the verify signature code.
998 kes Simplify a few of the alternative returns in the signature
1001 ebl Use only POSIX regex instead of GNU regex in breg.c for
1002 File relocation. It fix broken freebsd compilation.
1003 kes Convert all other Dir files to use ne ua class message
1005 kes Tentative fix for missing digest signature in bug 807.
1006 kes Correct handle problem in new win32_ftruncate routine.
1007 kes Convert ua_purge.c and ua_update.c to use new ua class
1008 message routines for bat.
1010 kes Correct incorrect installation of LICENSE in Win32 installer.
1011 kes Display LICENSE at the beginning of the Win32 install.
1012 kes Attempt to correct the need for the png files to be installed
1014 kes Reapply my bat.conf install script in qt-console. I think I
1015 editted bat.pro instead of bat.pro.in and it was lost.
1016 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1017 the /var/lock/subsys for subsysdir. Also corrects typos in the
1020 kes First cut update job.
1021 kes Correct configure to include qmake of src/qt-console directory.
1023 kes Make restore job yes/mod/no print in one command so GUI works.
1024 kes First cut implementing backup and restore client.
1025 kes Correct editing in Verify output that caused a seg fault.
1027 kes Insure that bat.conf is not overwritten during installation.
1028 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1029 while I was implementing migration in March 2006 !
1031 ebl Cleanup file relocation, using char *RegexWhere instead of
1032 char *where + bool where_use_regexp
1033 kes Update some manpages and add bat manpage.
1034 kes Make a first cut at converting bacula.spec.in for bwx-console
1036 kes Apply patch from John Goerzen to add hostname as fourth argument
1037 to make_catalog_backup script.
1038 kes Fix typos I introduced into bsmtp.c
1039 kes Make pm_strxxx() routines handle input of NULL pointer. This
1040 is to protect from NULL pointers returned from SQL databases.
1041 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1042 kes Add more debug to FIFO code -- fix fifo regression test.
1044 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1045 kes Add thread timer to bnet_connect() to break from OS if wait time
1048 kes Update Win32 build to include new files, new symbols, and
1050 kes Implement socket level heartbeat (tcp_keepidle)
1051 ebl Commit File relocation patch
1052 kes Make bat have 'make install' target.
1053 kes Warn during install if old gnome-console binary found.
1054 kes Warn during install if old wx-console binary found.
1055 kes Add -8 option to bsmtp command line to add content type utf-8.
1056 Fixes bug #809. (Character coding problem in bsmtp).
1057 kes If < is found in target (from, to, cc) then do not enclose the
1058 target in < > in bsmtp. Fixes bug #772 (malformed address).
1059 kes When printing certain items in dbcheck, stop after 300000.
1060 Fixes bug #822. (dbcheck loops).
1061 kes Incorrect status in Dir after waiting for mount with poll set.
1064 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1066 kes Print waiting to reserve a device every 5 mins.
1068 kes Don't call close_part in label.c if tape and relabel.
1069 kes Don't free volume if busy in close() -- should help with
1071 ebl Fix #824 RunScript bug (After script could be execute twice)
1072 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1073 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1074 Add a regression script to test RunScript
1076 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1079 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1080 deprecated. No additional bugs will be fixed, and they will be dropped
1081 in a future release (probably 2.4.0).
1082 kes Change name of wx-console to bwx-console to make it more Bacula
1084 kes Change the name of gnome-console to bgnome-console to make it
1087 kes Some time in March, a Feature Request with patch from Jorj Bauer
1088 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1090 The ability for the director to validate a Client (FD) CN against
1091 an arbitrary set of patterns rather than the hostname, with
1092 A new 'TLS Allowed CN' set of directives which are implemented
1093 in the Client resource. Then pattern matching is used in place
1094 of hostname matching against the Certificate's CN. As an example, we
1095 have certificates which (a) use a local CA, and (b) have a CN of the
1097 kes Add new/changed entry points to Win32 build
1098 kes Create unaccepted-projects for projects that are not accepted.
1099 kes Simplify locking in the reservations system.
1100 kes Add more debug code in reservations.
1101 kes Make sure error condition on reserving a volume is handled correctly.
1102 kes Correct handling of volume_in_use.
1103 kes Correct handling of initializing a device.
1104 kes Move handling of broadcasting releasing a device into release_device().
1105 kes Correct attaching dcr to dev so that it is only done if device
1106 is properly initiated.
1108 kes Locking debug level tweaks in SD.
1109 kes Tweak new Volume code.
1111 kes Add exec external-command [wait-seconds] to bconsole. This
1112 executes the external-command. Note! normally external-command
1113 should be enclosed in double quotes.
1114 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1115 it should normally be off in a production system.
1117 kes Implement die command for SD so that we can force it to dump.
1118 kes Implement SD lock debug code.
1119 kes Implement new algorithm for keeping Volume list in SD. It
1120 is now owned by the device.
1122 kes Implement new code for freeing in use volumes that should
1123 resolve if not all, some of the problems of multiple drive
1124 tape conflicts described in bug 801.
1126 kes Fix gui/bacula-web/images files in svn.
1127 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1129 ebl Fix a bug in batch mode (in string escape)
1130 kes Correct migration prune SQL typo that crept in in a
1131 recent 2.1.x change.
1133 kes Move bnet_despool() into class in bsock.c
1134 kes Modify job report to include director name and Build OS.
1135 kes Move drop root privilege and check_catalog() before fork.
1136 kes Add update database scripts (version 9 to 10) to updatedb directory.
1138 ebl Check size and age of each file after its backup to see if
1139 it has changed during backup, if 'checkfilechanges' is set.
1140 The FD will do an extra check (stat(2)) after
1141 each file backup. mtime, ctime and size are compared with
1142 'before backup' information. If time or size mismatch, an
1143 error message will be generated. You must upgrade FD to use it.
1145 kes Make database name and user configurable
1146 --with-db-name=xxx --with-db-user=xxx
1147 kes Add back database type to message.c for debugging.
1149 kes Implement dir_sql() which issues an SQL query.
1150 kes Modify bat medialist to use dir_sql() and do some minor C++
1151 formatting as well as eliminating a number of pointers, simplifing
1154 kes Fix some of the mtx-changer grep commands for tape label readers.
1155 kes Convert a number of bsendmsg into the appropriate send/warning/error
1156 message class calls.
1157 kes Suppress the using database message in the .sql command.
1158 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1160 kes Add context menu for floating a window.
1161 kes Some minor cleanup and name changes in qt-console
1162 kes Add doing mt setblk 0 in Win32 mtx-changer.
1163 kes Apply Martin's bug fix to move definition of ENODATA for
1165 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1166 sqlite2 and sqlite3.
1168 kes More pruning cleanup.
1169 kes Turn on wait_for_drive by default in mtx-changer.
1170 kes Turn on Batch insert code by default as it now passes regression.
1171 kes Add ./configure --enable-bat to enable building of Bat.
1172 No install yet though.
1174 kes Implement a new .sql command for bat.
1175 kes Implement code to turn off pruning in obtaining the next volume.
1176 Pruning is turned off for the status dir command, but turned on
1177 for SD requests and for the list nextvolume command.
1179 kes Correct Qmsg() that was not updated correctly when committing a
1180 previous change (probably the recent TLS patch).
1182 kes Write new subroutine is_volume_purged() that explicitly checks
1183 if the Volume is purged, and if so marks it as such. This should
1184 resolve problems reported about needing to mount twice to recycle
1186 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1187 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1188 amount of duplicated code.
1189 kes Do volume pruning only for the Media Type desired (reduces pruning time
1190 if multiple Media Types are in the same pool).
1191 kes Implement more detailed info in the Job report for the Bacula version
1193 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1195 ebl Add bbatch tool to bench database and insert mode.
1196 Fix sql quote stuff in batch mode
1197 Fix sql stuff for mysql
1199 kes Correct problems with am/pm scheduling. Fixes bug #808.
1200 kes Implement new prunning code that prunes up to 1000 jobs at
1201 the same time. The same technique can be applied to a number
1202 of other prune/purge subroutines.
1203 kes Add an insanity check when starting a new tape job to ensure
1204 that the tape position has not been changed. If so fail the
1206 kes Fix Win32 build for dlls to add the folllowing:
1207 src/lib/bsock.c -- new file with new entry points
1208 src/lib/dlist.c -- new entry points
1209 src/cats/sql_create.c -- new entry point
1210 src/cats/sql_cmds.c -- new DATA item exported
1212 ebl batch mode cleanup bscan-test is ok now.
1213 kes Implement SD code to check length of disk volume before appending.
1215 kes Correct return status on db_batch... routines.
1216 kes Add call to db_write_batch_file_records() to migration code.
1217 ebl Fix AfterJob timing
1218 kes Move the checking of the database in initializion of the Director
1219 to after we drop privileges. This avoids the need for both root
1220 and bacula access to the DB.
1221 kes Correct a misplaced variable definition in src/filed/backup.c
1222 kes Correct how the new batch insert db_create_attributes_record()
1223 uses the arguments. Caused a seg fault in bscan.
1224 kes Implement lock() and unlock() methods in DEVICE class.
1225 Implement block() and set_block(xx) methods in DEVICE class.
1226 kes Modify bnet_connect() so that it uses time() to check for the
1227 wait time expiring (on some OSes, some system calls may not
1228 return immediately).
1229 kes Modify Verify to obtain the previous JobId when it is actually
1230 running rather than at schedule time (as it was in 1.38.x).
1231 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1233 kes When checking pid in pid file, continue running if the pid is
1234 the same as ours. This occurs on IRIX after a system crash.
1237 kes Extend new GUI API.
1238 kes Make the ua structure a class, and implement send_msg(),
1239 error_msg(), warning_msg(), and info_msg().
1241 kes Apply fix from for building wx-console on the Mac from
1243 kes Implement new select mechanism for GUI programs.
1244 kes Reorganize initialization of stackedWidgets in bat.
1246 kes Add updated nagios plugin supplied by Christian Masopust.
1248 kes More bat implementation.
1249 kes File migrate bug with Pool Occupancy using mediaid instead
1250 of jobids. Fixes bug #795.
1251 kes Fix orphaned buffers in filed backup and verify due to
1252 crypto buffers not freed during errors. Fixes bug #789.
1253 kes Extend new GUI api code to tree commands.
1254 kes Ensure that tree and dot commands check console ACLs.
1255 kes Permit marking directory with trailing slash.
1256 kes Allow 20 console connections (instead of only 10).
1258 kes Add smartctl call to bacula-sd.conf as an example of getting
1261 kes Modify jobq.c to let simultaneous restore jobs run. This may
1262 cause them to fail if they cannot get a drive.
1263 kes Add Client Connect Wait to Storage daemon to permit users to
1264 modify the time the SD waits for a FD connection.
1266 kes Correct virtual changer check which was backwards. This caused
1267 volumes to be unloaded into slots already occupied.
1269 kes Apply Command ACL filter to JobId list in restore command.
1270 kes Correct typeo in var.c patch.
1272 kes Don't let Bacula prune File or Job records for the current Job.
1273 kes Fix variable substitution pad + inc bug reported (with patch)
1276 kes Correct SQLite log table index as reported by Luca Berra.
1278 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1280 kes Begin implementing new comm signals for API.
1281 kes Fix a few places in lib/message.c where the open fd may
1283 kes Continue implementing lib/bsock.c (real class). Make jcr,
1284 who, host, and port private. There are new methods to access
1285 them for non-class use. This required touching a number of files.
1287 kes Add LANG=C to autoconf/randpass so it works with languages other
1288 than English. Fixes bug #788.
1290 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1292 You will not be able to generate Include/Exclude list any more.
1293 It will be fixed soon.
1294 If you want to use this, you can apply
1295 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1297 kes Restore of sockets created false error messages because Bacula
1298 no longer restores sockets, but the code was still trying to
1299 set the attributes on a non-existent file. Reported by a user.
1300 ebl finish RecyclePool feature
1301 Media will takes Pool.RecyclePool
1302 when moving from Scratch to a Pool or when user will do
1303 update volume=xxx frompool
1304 To use it, add RecyclePool = aPool to your Pool resource
1307 RecyclePool = Scratch
1311 kes Expand new BSOCK class adding signal() and new BNET signals.
1312 kes Begin enhancing the dot commands adding a new API function
1313 that returns more information and will make it easier
1314 to interface to the Director from a program.
1316 kes Make DEVICE fd private. Its new name is m_fd, and can be
1317 obtained with dev->fd() outside the class. This is the
1318 first of many DEVICE members to be made private.
1319 kes Implement Michael Renner's idea on having a virtual disk
1320 changer. I made some minor modifications (e.g. I did not
1321 implement the Virtual Changer directive, but simply set
1322 the Changer Command to an empty string.
1324 kes Implement a BSOCK send() method that writes the whole record
1325 in a single write() request rather than in two.
1326 ebl add update volume=xxx recyclepool=yyyy
1327 volume takes recyclepool from pool when using update volume=xxx from pool
1329 kes Fix encryption deblocking bug, which caused some restored files
1330 to be truncated. This fixes bug #763.
1331 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1332 kes Fix 12am/pm bug as reported in bug #782.
1334 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1335 ebl Use btime_t instead of uint64_t in media patch.
1337 kes Optimize the use of the database a bit in the Status dir command.
1338 Only open it when needed, ensure that if any previous database
1339 was opened, it is closed.
1341 kes Correct VolCatBytes bug from media patch.
1342 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1343 in the case of orphaned records.
1344 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1345 and File records in 300K chunks to be more efficient. This
1346 idea came from Juan Luis Frances (if I remember right).
1347 kes Apply Eric's scratch patch that moves a purged Volume to
1348 the RecyclePool. Question: how is RecyclePool set? what
1349 happens to the ScratchPool?
1350 kes Apply Eric's media patch that collects read/write media
1351 times as well as byte counts. This patch requires a
1352 simultaneous upgrade of the DIR and SD. Note, there
1353 should be some way to turn off timing. I'm not sure
1354 times are in Bacula units.
1355 kes Apply Eric's batch-insert patch.
1357 kes Update projects list.
1359 kes Implement Include/Exclude file lists in FD as dlists using
1360 the new dlistString class. This permits efficiently having
1361 large include/exclude lists and completes project Item 25.
1362 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1363 console is authorized to cancel the job. This fixes bug
1365 kes Modify SD so that the VolCatJobs medium record is updated
1366 at the beginning of a Job rather than the end. This
1367 fixes bug #775 where exceeding MaxVolJobs caused jobs
1369 kes Added a mutex around getting and setting Volume information
1370 so that multiple simultaneous jobs will single thread.
1372 Switch to using Subversion
1373 kes Remove src/pygtk-console/ from configure
1375 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1376 plus the entrypoints.
1377 kes Apply patch supplied that corrects debug print
1378 in canceling jobs for max run time. Supplied as
1379 part of bug #621, which was previously fixed.
1381 kes Test on job_canceled() and sd_msg_thread_done inside
1382 loop starting the message thread to avoid a race condition.
1384 kes Remove rl_catch_signal from console.c as it conflicted
1385 with the header definition. Fixes bug #765.
1386 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1388 kes Clarify some stored/acquire messages to indicate if the
1389 problem is with read or append.
1391 kes Fix memory leak with storage ids in cats/sql_get.c
1392 kes Terminate watchdog earlier to avoid reference to released
1393 memory -- reported by Jason Austin.
1394 kes Move closing the database from jobq.c to the director daemon
1395 termination routine. This fixes memory leaks for shadow jobs
1396 (i.e. migration jobs).
1397 kes Free up the unique jobid chain items in migrate.c. This fixes
1398 a memory leak problem.
1399 kes Convert some ugly looking for statements to use foreach_alist
1400 in findlib/find.c. This will facilitate converting the structures
1401 to use dlist (for large include/exclude lists).
1402 kes Fix a bug in the btree.c and btree.h routines, then rename them
1403 rblist and add them to be built in src/lib. Include some new
1404 methods written by Rudolf Cejka that make the code more readable
1405 (hides some of the ugly casting).
1406 kes Add set_next() and set_prev() methods which make the code much more
1407 readable. Also add a new dlistString class that facilitates storing
1408 strings in dlists. To be used in the large include/exclude lists.
1409 kes Make some trivial modifications to lib/tree.h that use rblist
1410 rather than dlist for storing the tree links. This was suggested
1411 by Rudolf Cejka. The result of this is that the restore tree now
1412 uses red-black binary trees rather than simple linked lists. This
1413 should give rather dramatic speed improvements for directories
1414 contining large numbers of directories/files (more than 10000).
1416 kes Fix maxruntime bug #621.
1418 ebl Implement the include JobID in spool file name project.
1419 kes Reorder projects file in order determined by Jan 2007 vote.
1420 kes Implement item #12 on project list -- quick release of FD by
1422 kes Fix open of SQLite3 db where user does not have write permission
1423 so that DIR does not crash. Fixes bug #761.
1425 kes Add back missing @ in Win32 Makefile.
1426 kes Change 'Device not configured to autolabel' from INFO
1428 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1429 which should restart an indefinite # of times.
1430 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1431 other DIR specifications.
1433 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1434 Fix path quoting in SQLite scripts.
1435 Fix problems with SHGetFolderPath.
1437 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1439 kes Fix Job restart on error bug that promotes an Inc to a Full
1440 backup. This should fix bug #755.
1441 kes Add qt-console and first cut of code.
1445 kes Fix Bacula->Documentation link on Win32 to point to index.html
1446 instead of bacula.html. Fixed bug #750.
1447 kes Return JobId in db_get_job_record() when JobId==0. This should
1449 kes Do not release source pointers when restarting a failed job.
1451 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1452 This *should* fix bug #747.
1453 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1456 kes Modify USTORE constructor to set an empty store_source string,
1457 and don't copy the store_source string in a cancel. Hopefully
1458 this will fix Arno's seg fault, bug #744.
1459 kes Add back code to disable conio in configure. Fixes bug #743.
1460 kes Correct the Options scanner in the FD to correctly handle
1461 SHA1 option, which was eating the next option. Reported by
1463 kes Add code to indicate when the SD is spooling, spool wait, and
1464 despooling as requested by Alan Brown.
1466 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob