]> git.sur5r.net Git - bacula/bacula/blob - bacula/ChangeLog
fcc4b88c51e15863535e651b69caa3e2e848f120
[bacula/bacula] / bacula / ChangeLog
1               Technical notes on version 1.39  
2
3 General:
4
5 Version 1.39.32 released: 
6 20Dec06
7 kes  Fix a couple of compiler warnings in wx-console
8 kes  Apply the immutable patch for FreeBSD hardlinked files supplied
9      by Olivier Lehmann.
10 kes  Add Volume name to Forward spacing message.
11 kes  Update migration job start time (so it is not zero) to prevent
12      immediate recycling of the job.  This *should* fix bug #733.
13 19Dec06
14 ebl  Fix runscript configuration parsing bug.
15 17Dec06
16 kes  Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
17      Remove NLS kludge from baconfig.h.  This fixes bug #729.
18 kes  Allow seeking on DVD.
19 kes  Add additional messages when Job canceled automatically for
20      max run time or max start wait exceeded.  This fixes bug #621.
21 kes  Update maxruntime-test in regression script to properly test
22      max run time -- from info given in bug #621.
23 kes  Simplify automatic cancel code.
24 kes  Add check for job_canceled() in FD when contacting SD so that if
25      job is canceled from max runtime, it terminates faster.
26 16Dec06
27 kes  Save and restore volume name in stored/mount.c fixed bug #712
28      where wrong tape was requested in a mount.
29 kes  Implement cleaner orphan buffer dumping with buf address.
30 kes  Fix orphaned buffer when canceling job waiting on op intervention.
31 kes  Update projects file for next vote.
32 kes  Implement a fix (more could be done) for bug #728 where a double
33      EOF is writing on the Volume when spooling is enabled and the    
34      connection with the FD fails (FD crash, comm error).
35 kes  Disable attempting to autolabel when polling and device is not
36      a tape. This fixes bug #730 where polling with a removable disk
37      not mounted caused lots of new Volumes to be created then marked
38      in error.
39 15Dec06
40 kes  Enable VSS by default.
41
42 Version 1.39.30 released: 
43 14Dec06
44 kes  Complete hopefully the last of the copyright transfer changes.
45 kes  Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
46      that migration writing to multiple volumes doesn't mess up reading
47      Volumes. This should fix bug #720 -- multivol migration fails.
48 kes  Make migration SQL look only for Type='B' jobs to migrate.  This should
49      fix bug #724 jobs getting migrated twice.
50 kes  Convert remaining dev_cap(dev, ...) to use dev->has_cap().
51 kes  Implement dev->clear_cap() and dev->set_cap() methods.
52 kes  Turn off disk seeking on restore for DVDs since I am not 100%
53      sure it works.
54 13Dec06
55 kes  Implement code that should properly set that a job was migrated,    
56      if the migration was successful even if there were no file to
57      migrate.
58 kes  Apply Richard's patch to fix building or filed/restore.c without
59      OpenSSL support.
60 kes  Ensure that at least one block is written by the SD even if the
61      FD dies or fails -- should fix bug #728.
62 kes  Convert stored/record.c ASSERT into a soft fail if the length of   
63      a record is too insanely long. This should fix bug #???
64 12Dec06
65 kes  Fix automatic labeling of File volumes, which was broken by new
66      removable device code.
67 10Dec06
68 kes  Remove typedef uLong for HP in baconfig.h.  It broke things.
69 lf   Fix job byte reporting -- the digest code runs in verify.c and
70      increases this value.  The better solution is to digest the
71      stream as we receive it, thus removing the need to re-read
72      from disk at all, but that requires more extensive and
73      potentially destabilizing changes.
74 lf   This commit fixes backup and restore of HFS+ resource forks.
75 lf   Add a long-missing 'break' statement in HFS+ attribute
76      handling that resulted in restore failures.
77 09Dec06
78 ebl  Fix runscript to always execute command after all job type.
79
80 Version 1.39.30 released: 
81 08Dec06
82 kes  Mark build-depkgs-mingw3 executable in configure process.
83 kes  Update autoconf/config.h.in to include LOCALEDIR
84 kes  Undefine NLS settings for wxWidgets as there is a conflict with
85      their way of doing things.
86 kes  Implement a rpool and rpool_source in jcr.h for Migration jobs.
87 kes  Change a bunch of ->hdr.name to ->name()
88 kes  Straighten out handling of read and write pools for Migration, including
89      getting the code in the proper order.
90 kes  Improve migration error messages and debug output.
91 kes  Shorten code path in migration if nothing found to do.
92 kes  Implement read/write pool in migration job report.
93 kes  Move ua_run.c select_job_level code into a subroutine (readability).
94 kes  Move ua_run.c display_job_parameters into a subroutine.
95 kes  Do not bash dcr->VolumeName in get_volume_info() because it makes
96      restore dependent on a valid catalog containing the Volume name.
97 06Dec06
98 kes  Put make_catalog_backup SQL_BINDIR in an environment variable to
99      make it easier for the user to change.
100 kes  Fail any backup job that tries to use encryption and sparse options.
101      Hopefully this is a temporary change.
102 kes  Correct the EndJob return string for non-backup jobs.
103 kes  Review the encryption restore code.
104 kes  Implement a new encryption regression test with compression.
105 kes  Modify migrate not to fail if nothing found to migrate. 
106 kes  Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
107      because they were not always set correctly.
108 05Dec06
109 kes  Update configure.in to include python 2.5 search.
110 kes  Back out unwanted migration change reported by Richard Mortimer.
111 04Dec06
112 kes  Make migration with no files to migrate set normal termination.
113 kes  Change message when job manually started to say Job queued. ... 
114 kes  Add job report indication of whether or not VSS and Encryption were
115      used by the FD.
116 kes  Modify sparseBlock variable name to make the code clearer.
117 kes  Add more sparse tests to regress using gigaslam sparse file
118      generator.
119 kes  Enable data encryption code.
120 kes  Add gigaslam.c to src/tools. It creates a 1GB file that contains
121      only two blocks -- i.e. it is a real sparse file.
122 03Dec06
123 kes  Enable disk seeking on restore.
124 kes  Implement the SD 'Block Positioning = yes|no' directive. This
125      allows the user to turn off block level seeking, but restores
126      will be much slower.
127 kes  Change the word illegal to read invalid in a few places.
128 kes  Fix Win32 build, which broke when I added parse_args_only in
129      lib. I'm not sure I got the entry point right for msvc.
130 kes  Turn off data encryption. It can be enabled by defining
131      DATA_ENCRYPTION in src/version.h and recompiling.
132 kes  Implement flag to turn off data encryption feature.
133 kes  Move unserial code in restore.c to a subroutine. Add a bit of debug
134      code.
135 kes  Rework a bit of code in backup.c to handle sparse blocks correctly.
136      The main problem was that signatures were being generated on blocks
137      of zeros, which is unnecessary.
138 02Dec06
139 kes  Fix scanner (next_arg) to handle leading double quote correctly.     
140 kes  Modify cd command in restore tree to look at full argument without
141      keywords.  This fixes bug #716.
142 01Dec06
143 kes  Do not update Migrated Job type if migration does not terminate
144      normally. This fixes bug #719.
145 kes  Update ReleaseNotes
146 kes  Purge Job records from the catalog for Migration. This was
147      not properly done previously. This fixes bug #718.
148 28Nov06
149 kes  Initialize msg_type to M_INFO in migration. Pointed out by
150      Robert Nelson.
151 kes  Add some fflush() statements for debug output. This should not
152      really be necessary and defeats buffering but users continue
153      to complain.
154 27Nov06
155 kes  More copyright changes.
156 kes  Make sure we don't detach from the despool read device since it
157      is a temporary structure where the condition variables are not
158      initialized.  Bug #711.
159 26Nov06
160 kes  Add Bacula version+date to Client record. This is a very minor
161      security problem in that passing the version facilitates a hacker's
162      life, but it will make support easier.
163 kes  Implement fixes to make disk seeking work.  Currently turned
164      off in version.h pending reserch on what problems it will cause
165      because of the previous bsnprinf() sign extension bug.
166 25Nov06
167 kes  Add Landon's refactor of restore Feature request to the
168      projects file.
169 kes  Tweak debug levels and messages for examining the disk
170      seek problem.
171 22Nov06
172 kes  Cleanup some of the error termination code in migration.
173 kes  Separate read/write source strings to keep track of where
174      storage devices are used in a job.
175 kes  Implement a new method of keeping track of which storage 
176      device is used in a Job.  USTORE keeps both a pointer to the
177      resource and to the source string.
178 kes  Modify all code to use new storage set subroutines in job.c
179 kes  Modify migrate.c so that the definitive selection of the storage
180      resource is done in the do_migration_init() routine prior to
181      the job going into the job queue.  This permits accurate 
182      deadlock detection (same read and write storage resource).
183 kes  Remove bfill from btape (I think it was a left over stub).
184 22Nov06
185 kes  Make sure that the storage for a job is pulled first from
186      the Pool and if not from the Job.  
187 kes  Ensure that either the Pool or the Job specifies a Storage
188      resource.
189 21Nov06 
190 kes  Start applying new FSFE copyright.
191 20Nov06
192 kes  Add additional error messages in acquiring a drive for read.   
193 kes  Make WritePartAfterJob the default so that the last DVD part 
194      always gets written to the DVD by default.
195 kes  Add additional error messages in migration. 
196 kes  Suppress redundant error messages in migration (possibly more to do).
197 kes  Apply Martin's fix (updated to 1.39) that takes into account
198      run storage overrides in the Director status display.
199 kes  Implement, but turn off the submitted code that sets the EOT
200      model on FreeBSD machines. Turning on this code is too risky at
201      this point in the development.
202 19Nov06
203 kes  Implement unique dbid routine for migration to prevent the same
204      JobId from being migrated twice. This should fix bug #709.
205 18Nov06
206 kes  Apply Jaime Ventura's 'mail on success' patch.
207 kes  Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
208      if memory usage gets too big.
209 kes  Tweak migration to ensure that read/write devices are different.
210 17Nov06
211 kes  Create an AUTHORS file to list Bacula contributors.
212 kes  Add Richard Stallman's four GPL freedoms to LICENSE 
213 kes  Require the conf file to have a valid NextPool for writing the
214      migration output.
215 16Nov06
216 ebl  Enable RecycleCount in catalog.
217 ebl  Fix "echo python | bconsole" segfault
218 14Nov06
219 kes  Implement code to pass the MediaId to the SD. The SD then uses
220      this MediaId when creating JobMedia records. This fixes a bug
221      with Migration where the MediaId got set to the second Volume
222      read rather than the write Volume.  Possibly (unlikely) fixes
223      bug #709.
224 kes  Remove NextPool from Job resource.
225 kes  Edit a few numbers in the restore dialog with commas.
226 kes  Note, the DIR<->SD protocol has changed.
227 13Nov06
228 kes  Replace () by {} in configure.in for proper HP configuration.
229 kes  Shorten some lines over 80 characters in filed/backup.c
230 kes  Cast sizeof() in filed/backup.c to avoid compiler warning.
231
232 Version 1.39.28 released: 
233 12Nov06
234 kes  Change error message 'illegal' to 'invalid' -- bug #707
235 kes  Add rather primitive device resource deadlock detection in
236      the job queue handler. It detects the same read and write device
237      for migration and cancels the job. 
238 kes  Start adding a unique_dbid_hander() routine in migration to avoid
239      duplicate mediaids and duplicate jobids.
240 kes  Add patch from bug #708 to permit relative paths such as ../xxx
241      in the restore tree routine.
242 kes  Add Eric Bollengier's patch to reduce locking time in the SD after
243      despooling, and thus many jobs finish faster.
244 kes  Correct locking order of reservations lock and device mutex in
245      reserve.c -- this should correct Arno's deadlock that occurred
246      when doing mount/unmount at the same time a job is reserving a
247      drive.
248 05Nov06
249 rbn  Fixed problems with encryption when combined with compression 
250      or sparse files.  Unfortunately this means that all previous 
251      encrypted backups can't be restored.
252 rbn  Fixed problem in bfgets with Windows and Mac end of lines.
253 rbn  Fixed bug in Windows version of close_bpipe() that cause programs
254      like bsmtp() to hang waiting for the pipe to be closed.  Fixed 
255      binary file type problems in open_bpipe().
256 rbn  Fixed a number of bugs in the mysql DB scripts.
257 03Nov06
258 ebl  Fix broken runscript on director. (RunBefore, RunAfter)
259 ebl  Use M_ERROR instead of M_FATAL in runscript.c
260 31Oct06
261 ebl  Small fix src/dird/job.c to add JobErrors count to catalog.
262 rbn  Ignore UTF-8 marker at the start of .conf files.
263 rbn  Add stab2cv to 3rd party dependencies.  This is a utility I 
264      wrote that is licensed under the GPL and available on SourceForge.  
265      It converts the stab debugging info generated by gcc into Codeview 
266      format.  Currently it just translates function names to global 
267      symbols.  This is sufficient to get reasonable stack traces from 
268      Dr Watson and to look at minidumps.
269 rbn  Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
270 rbn  Enable Windows XP look and feel for the tray icons and wx-console.
271 rbn  Add Windows specific FileSet example to bacula-dir.conf.
272 rbn  Reorganize Start menu so that documentation and configuration are 
273      in subfolders.
274 21Oct06
275 rbn  Change daemons and utilities so that if -c is omitted from the 
276      command line AND there is no configuration file in the current 
277      directory then the 'standard' configuration file (eg 
278      /etc/bacula/bacula-*.conf) will be used.  If the argument to -c 
279      doesn't contain any path separators AND there is no configuration 
280      file by that name in the current directory then the 'standard' 
281      configuration file directory will be searched for a file by that 
282      name.
283 rbn  Fixed restore on Windows so that backslashes as path separators works.
284 rbn  Add missing query.sql file to Windows installer.
285 rbn  Fixed Windows versions of catalog backup scripts.
286 20Oct06
287 kes  Fix optional files in Makefile.in of src/filed that caused
288      a syntax error when using no optional files.
289 15Oct06
290 lf   Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
291      messages; there is no reason to attempt to load a private key.
292      from master key files.  
293
294 Version 1.39.26 released: 
295 12Oct06
296 kes  Apply the three patches from Richard Mortimer. 
297      bacula-reposition.patch, bacula-tape-reopen.patch, and
298      bacula-eod.patch. This corrects tape positioning on older devices,
299      and also a problem with btape.
300 kes  Apply fix from bug report #696 where writing to a FIFO does not
301      work due to a dumb typo.
302 kes  Unlock the tape door before the file descriptor is released. This
303      should fix lots of somewhat subtle failures when using an autochanger.
304 11Oct06
305 kes  Correct mtx-changer bug that I introduced in a recent commit, and
306      pointed out by Robert Nelson -- thanks.
307 rbn  Fix Windows' daemons so that messages print to stdout if not 
308      running as a service.
309 rbn  Add daemon name to trace file name (eg bacula-dir.trace).
310 rbn  Fix environment variable expansion in directory names on Windows.
311 rbn  Fix autochanger support in fill command.
312 rbn  Update SQL scripts to match Unix versions.
313 rbn  Fix daemon usage displays.
314 rbn  Cleanup bacula-dir.conf template.
315 rbn  Install openssl.cnf so that the openssl.exe installed in the
316      Bacula\bin directory can be used to generate keys and 
317      certificates for TLS and encryption.
318 rbn  Fix cleanup of spool files on Windows.
319 rbn  Remove /silent option from daemons on Windows.  The new default 
320      is the same as the old /silent.  To enable the message boxes that 
321      previously were suppressed by /silent you must add /debug instead.
322      NOTE: As a result of this change, the first time you upgrade from 
323            a previous version of 1.39.x you will receive the message 
324            boxes when the remove of the old services succeeds.  This 
325            is the same behaviour as when migrating from a version prior 
326            to 1.39.0.
327      However, going forward, these message boxes will not appear on 
328      upgrades or new installs.
329 rbn  Add new /debug option. This option enables the message boxes that 
330      previously were suppressed by the /silent option.  In addition the 
331      daemons running as services will open a console window if this 
332      option is used.
333 rbn  Fix bug with service not being removed on migrated installs.  This 
334      should correct those cases where the file daemon install was failing
335      when upgrading from versions prior to 1.39.x.
336
337 08Oct06
338 kes  Turn on heap reporting in Dir with zero debug level.
339 kes  Send a message to the sys log when Bacula forces a SEG FAULT, and
340      send the same message to stdout.
341 07Oct06
342 kes  Begin work on new GUI "console".
343 kes  Make configure look in non-standard MySQL library directory 
344      for Solaris.
345 kes  Make mtx-changer automatically configure the autochanger wait
346      procedure for Solaris, FreeBSD, and Linux.  Previously, only Linux
347      was implemented.
348 kes  Correct drop_sqlite_tables.in script to not delete the database.
349 kes  When writing to a log file, close and reopen the file descriptor
350      if there is an error writing the file.
351 kes  Modify the autochanger loaded?, load, and unload commands to print
352      the full text of any mtx output if there is an error.  Helps to
353      ease diagnosis of autochanger problems.
354 kes  Correct a few Win32 errno returns in the VSS code so that hopefully
355      a resonable Win32 error message will be printed.
356 kes  Convert a few strcat()... to bstrncat() in the Win32 code.
357 06Oct06
358 rbn  Added Windows version of bsmtp.
359 rbn  Fixed path search for Windows so that Bacula\bin is automatically 
360      searched for programs and scripts.
361 rbn  Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
362      Windows specific.
363
364 Version 1.39.24 beta released:
365 02Oct06
366 rbn  Fix restore problem with c:\ prefix bug #676.
367 rbn  Verify that drive letter is valid on restore.
368 rbn  Fix re-open() options for tape.
369 kes  Apply dvd find volume patch from Richard Mortimer.
370 kes  Eliminate the dvd specific mount routines using only the
371      dev->mount/unmount.
372 kes  Make update_free_space a method of DEVICE and rename 
373      update_freespace.
374 01Oct06
375 kes  Require a messages command acl to be able to receive messages
376      in a console.
377 kes  Add console, system, and scan job types in util.c.
378 28Sep06
379 kes  Print the Volume purged message only for real jobs to keep
380      from cluttering up the daemon messages.
381 kes  Lock the tape drive door while Bacula is using the device.
382 kes  Add back the 'No Jobs running' message to FD and SD status because
383      my regression script depends on it, and I'm too lazy to change the
384      scripts.
385 kes  Start using structure assignments (not too happy about it ...).
386 kes  Fix a bug in the tools Makefile that broke on Solaris.
387 kes  Unload any autochanger drive during a 'release' command.
388 26Sep06
389 kes  Enhance error message when restoring without bootstrap file.
390 kes  Check restored size only for regular files.
391 kes  Store Python job level in job record in Dir.
392 kes  Add back code to open tape device nonblocking, but if rewind fails
393      release file descriptor.
394 kes  Modify acquire.c to first try autoloading the device. Also, ask operator
395      to mount tape if drive cannot be opened.
396 rbn  Made Windows service tray status windows resizable.
397 rbn  Fixed horizontal scrolling of text in status window.
398 rbn  Preserve horizontal and vertical scroll position while 
399      updating.  This prevents the display being reset to the
400      top line every 5 seconds.
401 rbn  Fix Windows cross-compile compatibilty problems with 
402      *nix variants such as OS X without the zic command.
403 rbn  Eliminate dependency on man2html.
404 25Sep06
405 kes  Update src/win32/dll/bacula.def for change in BPIPE definition for
406      Win32 build.                 
407 kes  Fix a compiler warning in compat.cpp
408 kes  Change strcpy to bstrncpy in compat.cpp
409 kes  Remove some broken code in bdb_list.c
410 kes  Fix, hopefully the last, ACL problem in the restore command.
411 kes  Update the README.mingw32
412 kes  Add new version of upgrade-win32-client.txt to examples directory.
413      Submitted by Michel Meyers.
414 kes  Print an INFO message in the job report when a Volume is marked Purged.
415 rbn  Fixed handling of external program and script execution
416      so that the format of the command line is more flexible.
417      Now executable path names containing spaces are translated
418      to the equivalent short name automatically.  The result is
419      passed to cmd.exe with the quotes removed.
420 24Sep06
421 kes  Apply the recycle patch from Richard Mortimer.
422 kes  Convert a few if statements in dev.c to switch statements.
423 kes  Start using print_errmsg instead of bstrerror().
424 kes  Print a job message in SD when a job is marked to be canceled.
425 23Sep06
426 kes  All code added back. Fixed block.c read/write to loop only 3
427      times. This apparently keeps the OS from crashing (at least     
428      most of the time).
429 kes  The kernel bug still persists. Backup something then immediately
430      do a bscan on the same tape, and the kernel will crash.     
431 kes  Simplifed tape open().  It no longer uses nonblocking mode, which 
432      means that opening with no tape loaded will probably take at least
433      6 minutes before an error is reported.
434 kes  Do not use MTSETDRVBUFFER if not running as root.  Do a MTRESET
435      when doing set_os_device_parameters.
436 kes  Report open error in mount.c
437 kes  Remove all .exe files from the installer directory on make clean.
438 20Sep06
439 kes  Start adding back removed code.
440 kes  Back out a number of changes because backups to tape crash my
441      system.
442 kes  Remove the inetd code from the File daemon.
443 18Sep06
444 kes  Add -c option to pg_dump so that it initializes tables when   
445      restored.
446 kes  Fix FirstWritten time on Volume to be obtained from SD so that
447      it is the actual time the volume was first written.
448 kes  Minor Makefile changes.
449 kes  Handle EBUSY during read(). Improve how EBUSY is handled in write().
450 ebl  Add yes keyword to prune/purge command
451 16Sep06
452 kes  Correct a test in block.c that prevented restore of a DVD from
453      looking at the last part in the spool directory.
454 kes  Make some error messages clearer mostly by using the word DVD
455      in the message. Improve infor message in read_record for DVDs.
456 kes  Remove DVD kludges in dircmd.c label/relabel.
457 kes  Move the dvd relabel code from dircmd.c into      
458      write_new_volume_label_to_dvd() adding a relabel argument.
459 kes  Rewrite the truncate_dvd() code to be much simpler and
460      more logical. First blow away any spool part, then create a
461      new empty part and write to the DVD.
462 kes  Rewrite the can_write_on_non_blank_dvd() code making it
463      only ensure that no valid data is on the DVD -- i.e. it
464      can be overwritten.
465 15Sep06
466 kes  Minor Makefile fixes.
467 kes  Put attach_dcr_to_dev in a subroutine.
468 kes  Make attaching/detaching to/from a device use a flag and 
469      only detach if actually attached.
470 kes  Add dvd-simulator.in to scripts directory and add to configure.
471 kes  Fix code in acquire.c that checks fd != 0 to use dev->is_open().  
472      This could be a cause of a number of drive reservation problems.
473      Note, this code is now in attach_dcr_to_dev().
474 kes  Suppress doing Volume updates if it is a system job.  This should
475      prevent the DVD label blocking.
476 kes  Clear the freespace ok flag in a couple of strategic places.
477 14Sep06
478 kes  Put removing zero sized spool part file in subroutine and
479      call from release_device().
480 kes  Add Richard's patch for relabel to dircmd.c, but save and restore
481      dev Volume name.
482 kes  Rework a lot of subroutines in dev.c to take dcr as an
483      argument. This is done to eliminate the usage of attached_dcrs
484      in lseek().
485 kes  Change truncated_dvd to blank_dvd, which seems more suitable.
486 kes  Apply most of Richard Mortimer's truncate patch.
487 kes  Create lseek() method for DEVICE that takes dcr as an
488      argument. This is to eliminate the use of attached_dcrs in
489      lseek().  The calls to lseek_dev() must still be changed.
490 13Sep06
491 kes  Apply Richard Mortimer's patches for printing an error 
492      message in btape when a DVD is used, and to initialize traceback.
493 kes  Added error message to btape when trying to access a file.
494 kes  Move prototype of update_slots() to protos.h.
495 12Sep06
496 kes  Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
497      and FDJobStatus to the Director Python variables.
498 kes  Make sure valid argument passed to str_to_utime() where Arno
499      had a seg fault.
500 kes  Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
501      I.e. part of two different patches.
502 11Sep06
503 kes  Modify disk changer to simulate some of the error conditions
504      of mtx-changer.
505 kes  Make sure the close() call in the SD tools is just before the
506      getchar() call.
507 kes  Implement dir_get_volume_info() in bls using the patch from
508      Richard Mortimer but call find_num_dvd_parts().
509 kes  Implement find_num_dvd_parts() that mounts and scans a DVD
510      and counts the parts. 
511 kes  Move the omode code in open_dvd() up so that the cannot
512      write on blank disk can check can be bypassed for read mode.
513      Not yet implemented.
514 10Sep06
515 kes  Disable normal data spooling for DVD writing which uses  
516      a different spooling mechanism.
517 kes  Apply patch from Richard Mortimer to ensure that the number
518      of DVD parts is correctly updated.
519 rbn  Save installer details log in the Bacula directory as 
520      install.log.
521 rbn  Add installer generation of client and storage templates
522      suitable for @inclusion on the director.
523 rbn  Mark previously installed components for Win32 read-only since 
524      deselection doesn't do anything.
525
526 Version 1.39.22 beta released:
527 08Sep06
528 kes  Fix logic error in handling error return from mtx-changer 
529      script.
530 kes  Make status from SD aware of -1 (unknown) Slot status.
531 kes  At Eric's suggestion make both the 'slots' and 'drive' commands
532      to the Storage daemon work even if the drive is busy.
533 kes  Make two separate Win32 menu links for starting bconsole and
534      wx-console in winbacula.nsi
535 kes  Apply DVD part_spooled patch from Richard Mortimer 
536      richm@oldelvet.org.uk 
537 kes  Put installer/Readme.txt into Win32 EOL format for Notebook.
538 rbn  Fixed problems migrating settings from previous releases in
539      Win32 installer. Add Readme.txt with an option to show it on 
540      the installer Finish page.
541 07Sep06
542 kes  Use get_catalog_resource() to open catalog database
543      to ensure that ACLs are respected and that user is
544      correctly prompted for database.
545 kes  Integrate multiple console/director patch from 
546      Carsten Paeth calle@calle.in-berlin.de
547 ebl  Add character substitution in Job/JobDefs WriteBootStrap.
548      You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
549 kes  Apply patch supplied in bug #656 to pass priority field
550      in the run dialog to the Director in gnome console
551 kes  Restore DCR after VOL_NAME_ERROR in mount.c.  Hopefully
552      this will fix bug #627 where Bacula eventually gets 
553      confused about what Volume it wants.
554 kes  Add a new close_part() class in the SD to save the device
555      state around open/close_part/open for DVD writing.  This
556      should fix the num_dvd_parts getting zeroed as reported by
557      Richard Mortimer.
558 kes  Apply patch from Richard Mortimer that correct edit code
559      for debug output of st_size.
560 ebl  Add support of encrypted data stream to bscan.
561      display data_len instead of data content (may be binary)
562 06Sep06
563 kes  Add dev->close() in dir_ask_sysop_to_mount_volume() in
564      bcopy. Fixes bug #669 reported by Eric.
565 kes  Fix incorrect number of arguments in SQL statement in
566      sql_get.c as reported by Eric.
567 kes  Manual updates.
568 kes  Update examples directory.
569 kes  Remove unused variable in winservice.cpp
570 kes  Make Win32 make command build installer.
571 rbn  Add new Install Type page, used to select between Automatic
572      and Custom installs.  Automatic installs only prompt for
573      configuration items that can't be reasonably defaulted.
574 rbn  Added Bacula logo to page headers.
575 rbn  Added Upgrade support
576      - Configuration and component selection are migrated from
577        pre-1.39 installs.
578      - Configuration of upgraded components is preserved and 
579        not prompted for
580      - Configuration of new components is handled according to
581        the Automatic / Custom selection.
582      - Component selection is defaulted to previously selected 
583        components.
584 rbn  Installation of Server components is disabled on 
585      Windows 95, 98 and ME.
586 rbn  Added URLs for support, info and upgrades to Bacula entry
587      in Add/Remove Programs.
588 rbn  Added Version info to Bacula entry in Add/Remove Programs.
589 04Sep06
590 kes  Correct dvd code that breaks tape labeling.      
591 kes  Implement Enabled on update slots.
592 02Sep06
593 kes  When doing a label, pass the VolBytes back to the Director,
594      which puts it in the catalog.
595 kes  Print an error message if the user attempts to prune an
596      archived Volume.
597 kes  Need to start using %ld when sscanfing 32 bit values.
598 kes  Update the free
599 kes  Correct the counting of VolCatBytes for DVDs. 
600 kes  Add code to mount.c to require that VolCatBytes corresponds to
601      what is actually found when doing an append.
602 kes  Update freespace only after writing on the DVD.
603 kes  Remove code that blows away the current part in the spool file.
604 01Sep06
605 kes  Apply new dvd-handler patch from Richard Mortimer.
606 kes  Tweak so that debug level 20 shows only DVD commands.
607 kes  Correct spooled_part flag in dev.c close() so that it is cleared
608      when the spool file is deleted or does not exist.
609 kes  Print part number in read_records when eof hit (restore).
610 rbn  Installer default changed to start services on new install.
611 31Aug06
612 kes  Make find with no args in tree restore return error rather than
613      stopping the selection. Fixes bug #665
614 kes  Rework DVD writing to ensure that the last part is written
615      on open_next_part when dealing with a spool file.
616 kes  Correct the lseek_dev() routine to handle end point correctly
617      (bug introduced by me).
618 kes  Allow part number to exceed num_dvd_parts in lseek_dev().
619 rbn  Change make_session_key on Windows to use WIN32 APIs to produce 
620      a better seed.
621 rbn  Add new tool scsilist.exe which displays the changer, tape and 
622      CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required 
623      to add them to bacula-sd.conf.
624 30Aug06
625 kes  Apply dvd-handler patch from Richard Mortimer.
626 kes  Apply dvd error check patch from Richard Mortimer.
627 kes  Apply bpipe race patch from Richard Mortimer.
628 kes  Rework how DVD labels are handled and set append only
629      when part > num_dvd_parts.
630 27Aug06
631 kes  Rework many features of DVD writing and reading. Added many error
632      messages.  Most importantly changed part to represent the current
633      part number base zero. This makes current DVD writing incompatible
634      with previous version.
635 26Aug06
636 kes  Add host:port to connect failure messages to FD and SD from Dir.
637 kes  Add WhereACL to console ACL list.  If nothing is specified, only
638      the default is permitted for restore. Otherwise, *all* allows any
639      path, or you can specify permitted paths. This should allow control
640      over where users can restore files. This is untested.
641 kes  Modified message to add a ? (as in loaded?) when querying the autochanger
642      for what Slot is loaded.  
643 kes  Fixed the use of Slot, so that is more correctly maintained, thus
644      eliminating unneeded duplicate calls to determine what Slot is loaded.
645 25Aug06
646 kes  Install man pages with 'make install'
647 kes  wx-console crashes because of differences between Bacula and wxWidgets
648      malloc()/free().  Tweak wx-console to use bmalloc()/bfree() for Bacula
649      calls.     
650 kes  correct improper indenting in wx-console/console_conf.c
651 kes  update wx-console header copyrights
652 kes  Fix bug #658 where wx-console mangles file/directory names containing
653      commas.
654 24Aug06
655 kes  Add Media.Enabled flag to client backups for dotcmds.c
656 kes  Enforce Media.Enabled=1 for a current restore to work.
657 kes  Require restore case 3 to have sqlquery permission to work.
658 kes  Remove obsolete del_MAC sql command.
659 kes  Ensure that bscan creates Volumes with Enabled=1.
660
661 Version 1.39.20 beta released:
662 22Aug06
663 kes  Correct missing Client table reference in SQL pointed out by
664      Marc.
665 21Aug06
666 kes  Fix Win32 build (new entrypoint, start baculafd).
667 20Aug06
668 kes  Add -n option to bconsole to turn off conio.
669 kes  Print JobIds to be migrated in Job Report.
670 kes  Add additional user supplied notes to the messages part of 
671      bacula-dir.conf concerning multiple email addresses.
672 kes  Fix an incorrect comment pointed out by a user in dvd_handler.in
673 kes  Add more recent Feature requests to Projects file.
674 19Aug06
675 kes  Apply Maritn's fix to src/win32/Makefile.
676 kes  Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
677 kes  Implement pruning for Migration and migrated jobs.
678 kes  Implement PoolOccupancy migration.
679 kes  Implement PoolTime migration.
680 16Aug06
681 kes  If doing a mount, look for a slot, and if specified pass it to
682      the SD so that it can load the autochanger.
683 kes  Return DVD=1 flag if a label command is done to a DVD. This
684      permits setting VolParts to 1.
685 kes  Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
686      rework ua_label code based on DVD media type to use DVD flag returned.
687 15Aug06
688 kes  Eliminate some compile warnings in dird_conf.c
689 kes  Format the bytes field in the terminated jobs part of the status
690      command for the three daemons with suffixes to reduce print size 
691      of backup bytes.  Suggested by a user.
692 kes  When not descending into a directory, print the File= name that
693      triggered it -- makes why not descending a bit clearer.
694 kes  Do not unload autochanger when doing a list command -- basic code
695      from Eric Bollengier.
696 12Aug06
697 rbn  Reworked the MinGW32 build-dependencies script, it has been renamed
698      to build-depkgs-mingw32.  It now handles two options -h to display
699      help and -C to reextract the source and apply the patches.  The -C
700      option is useful for updating the source after new patches are 
701      released.
702 rbn  Moved the 3rd party package URLs to a separate file External-mingw32.
703      This allows updating to new versions without having to modify the
704      script and makes it easier to figure out which packages and which
705      versions are used.
706 rbn  Added a new script build-depkgs-msvc.cmd which does the same thing
707      as build-depkgs-mingw32 except they are built using Microsoft Visual C
708      and placed in the depkgs-msvc directory.  There is also an 
709      External-msvc file to describe the packages.
710 08Aug06
711 rbn  Fix Windows cross-compile compatibilty problems with FreeBSD.
712 07Aug06
713 kes  Fix bug #462 incorrect error message printed when client script called
714      from File= was not found.
715 kes  Fix bug #558 (waiting for feedback) where Bacula needs too much time to
716      do a rewind on Solaris when no tape is in the drive (Solaris does not
717      have the detailed errno found on Linux).  Added Solaris specific code.
718      Note, this may apply to other OSes as well.
719 06Aug06
720 kes  Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
721 dsb  Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
722      fix bug 648 - update sqlite script patches, lock out gnome2console
723      builds for platforms with gtk+ < 2.4.
724      Updated build_rpm.sh - add remote source directory, add switch for 
725      signing, refine file names.
726      Updated spec file again for Mandriva build as they have this curious
727      custom of silently converting all manpages to bzip2 format just before
728      the final packaging step.
729 05Aug06
730 rbn  Fixed the Windows Makefiles so that they won't accidentally try and
731      pickup binaries for the Unix build.  This allows both the Unix
732      build and the Windows build to be built in the same tree without
733      interfering with each other.
734 rbn  Fixed error handling and cleaned up mtx-changer.cmd.
735 rbn  Added the rest of the database scripts.  These are installed but are
736      not yet edited for variable replacement.
737 rbn  Broke out the cats functionality from bacula.dll and put into new
738      separate dlls for each database type.  At installation time the
739      correct one is copied to bacula_cats.dll.
740 rbn  Eliminate the need to install the mysql.dll on client only builds.
741 rbn  Moved dird/sql_cmds.c into the cats directory so all the database
742      specific #ifdefs were in the cats directory.
743 rbn  Added a new sql_cmds.h with all the declarations for the variables
744      exported from sql_cmds.c.
745 rbn  Moved catalog_db[] from lib/message.c to a new routine db_get_type()
746      which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
747      src/cats.
748 kes  Correct improperly formatted list command output reported by Dan.
749 04Aug06
750 kes  Correct despool time calculation.
751 03Aug06
752 kes  Remove previous changes to compat.cpp as they create problems.
753 kes  Use old style MD5 for FileSets to avoid Full saves on every Job.
754 kes  Attempt to fix problems with the msg_queue crashing on Solaris
755      when Bacula is terminating, but problems remain.
756 kes  Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
757      name editing problems with too many \\?\es.
758 kes  Fix some Bacula source code style problems in compat.cpp.
759 kes  Add debug code to compat.cpp and convert non-Bacula debug code
760      to Bacula style.
761 02Aug06
762 kes  Change the name of the technical notes file from kes-1.39 to
763      technotes-1.39.  Prefix my messages with 'kes  '.
764 kes  Allow dequeue_messages() to be called twice. Should fix bug  
765      # 649.
766 kes  Add Job type to bscan Job information output.
767 01Aug06
768 kes  Update copyright date in program files, and for the most part
769      put it on a #define.
770 kes  Implement %q in bsnprintf.c apparently I forgot it.
771 31Jul06
772 kes  Make disk-changer sed command compatible with FreeBSD.
773 kes  Make a first cut at a ReleaseNotes and ChangeLog for a 
774      beta release.
775 kes  Make make clean descend into the src/win32 directory.
776 kes  Fix some #ifdefing so that Solaris and FreeBSD compile 
777      sys/stat.h was turned off.
778 kes  Use suffix editing for new transfer rate messages.
779 kes  Attempt to come up with a workaround which seems to be an OS
780      bug where write() returns EBUSY.  IMO this should not happen.
781      It triggered in truncatebug test. The workaround retries using
782      a 100 ms wait.
783 kes  Eliminate a strerror() call in a class method that failed with
784      older C++ compilers.
785 kes  Use rm -rf rather than rmdir to delete the src/win32/release
786      directory during make clean.
787 30Jul06
788 kes  Make bscan ignore ACL streams.
789 kes  Update projects files with new Feature Requests.
790 kes  Generate current English and French manuals and upload
791      them to the site.
792 kes  Update the home page to include the new British/French flags to
793      switch between translations. Work done by Alexandre Baron.
794 kes  Make disk-changer script print an error message if the changer
795      directory is not defined.
796 kes  Create a generic DB routine for getting an int (32/64 bit) from
797      the DB.
798 kes  Add more migration code.
799 kes  Add a few more files to .cvsignore here and there.
800 kes  Minor fixes for SD write rate and despooling rate.
801 kes  Turn off new test code in src/console.c
802
803 Version 1.39.18
804 29Jul06
805 kes  Incremented the version number to signify that all of Robert's code
806      for Win32 that was in the branch is now integrated into the HEAD,
807      and that Eric has submitted code that we hope will provide limited
808      backward compatibility with 1.38 file daemons (more testing to be
809      done).
810 kes  I rationalized a few of the names of the variables (mainly jcr names)
811      that are used during migration as keeping three different jcrs at the
812      same time clear in ones head is not easy.
813
814 Version 1.39.17
815 28Jul06
816 eb   Tweak new runscript feature to work with 1.38.x FDs. 
817 eb   Correct crypto.c to fix segfault when restoring an encrypted stream 
818      on fd which don't use rsa keys.
819 eb   Add yes/no English keywords on localized yes/no questions.
820 27Jul06
821 kes  Several important commits from Robert Nelson for code cleanup and
822      Win32 build.
823 kes  Modify console.c so that when conio is enabled, it converts \n to
824      \n\r before outputting to the console.  Hopefully this will fix
825      the problems with expect in Perl that Eric saw.
826 24Jul06
827 kes  Change cats/sql.c to eliminate %-*s format, which I think is turned
828      off in bsnprintf.
829 kes  Add Comment field to llist of a volume.
830 kes  Allow true/false in some yes/no questions.
831 kes  Implement update volume enable=(on|off|true|false|archived|0|1|2)
832 kes  Remove a few /n's when scanning commands from another daemon. This
833      permits adding additional fields later.
834 kes  Modify dbcheck to handle ctl-d and to delete Log table entries.
835 kes  Update README.mingw
836 22Jul06
837 kes  Tweak authentication to work with 1.38.x FDs. 
838 kes  Tweak catalog make scripts.
839 kes  Fix catalog upgrade scripts so that they work.
840 kes  Correct despooling debug code to eliminate race condition.
841 19Jul06
842 kes  Add additional fields as specified by Arno to LocationLog.
843 kes  Add comment field to the Media record.
844 kes  Add Time field to the Log record.
845 kes  Correct migration SQL (thanks to Bill Moran) so that it
846      runs with PostgreSQL also.
847 kes  Add spooling/despooling info in status output of SD.
848 17Jul06
849 kes  Spend a lot of time integrating mkcdrec with the rescue disk.
850 kes  Add VOLMGMT message class for volume management messages (none yet).
851 kes  Add CATALOG as a destination.     It goes into the LOG table.
852 kes  Implement the Log table in the DB.
853 kes  Implement the Location Log table in the DB (for user use).
854 kes  At Eric's request add a run_scripts() just after blast_data in
855      src/filed/job.c
856 10Jul06
857 kes  Add Enabled column to Location, correct some typos in DB schemas.
858 kes  Correct bug I introduced into RunScripts enum.
859 kes  Add log table to Catalog
860 kes  Purge original job migrated if the migration terminates normally.
861 kes  Cleanup purging of files/jobs so that it is done only in a 
862      single subroutine.
863 kes  Add new VOLMGMT message class.
864 kes  Add Catalog message destination (user conf code remains to be written).
865 09Jul06
866 kes  Modify read_record and friends to properly deal with migration         
867      needs.
868 kes  Update debug code in read_record.       
869 08Jul06
870      ======================= Warning ==========================
871      Separate read and write storage in Jobs in the Director. This
872      is a major rewrite of some of the low level code and hence has
873      a high probability of introducing bugs.
874      ==========================================================
875
876 kes  Move the job init code up to *before* the job is put into
877      the job queue (resource allocation queue). This permits the
878      job to establish whether it will read or write or do both.
879 kes  Add name() methods to all the resource classes.
880 kes  Implement separate read and write storage resource 
881      allocation/deallocation in jobq.c
882
883      ======================= Warning ==========================
884      Implemented new method of getting the default Storage from the Media
885      record rather than from the MediaType for restore.  As a fall
886      back, if no Storage is defined, use the MediaType.  This
887      eliminates most all prompts if there are multiple MediaTypes
888      used. This is an important and fundamental change.
889      ==========================================================
890
891 kes  Add more detail (Storage, Device) to list of volumes printed
892      for restore.
893 kes  More code in migrate. In particular start multiple jobs if
894      migrating a volume.
895 kes  Probably overkill, but ensure that the bsr is unique even within a 
896      job in FD and SD.
897 kes  Rework bsys.c drop() so that it now should work as expected.
898 kes  Update a bunch of old copyrights -kes  particularly in .h files.
899 kes  Remove src/lib/bshm.c/h
900 05Jul06
901 kes  Migration fixes
902 04Jul06
903      ======================= Warning ==========================
904         All hash codes in the database are now kept in world
905         compatible base64 format (no = filling). This means that
906         all FileSets will be updated and if you are running
907         verify jobs, you must do an InitCatalog.
908         Authentication uses the new algorithm, but should be
909         backward compatible with 1.38.x
910      ===========================================================
911
912 kes  Modify the authentication routines so that the 1.39.15 Director
913      always runs with the compatible binary to base64 code (same as
914      the rest of the world).  It will however detect if an SD or
915      FD is running the old code and if that is the case, will use
916      the old algorithm for authentication.  However, all consoles must
917      use the compatible algorithm, and all data entered into the database
918      (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
919      use the compatible algorithm.
920 kes  Rename the cram_md5 routine names to be slightly more appropriate
921      to what they are doing (challenge and respond).
922 kes  Robert committed his #ifdef and header cleanup.
923 30Jun06
924 kes  Fix a compiler warning in files/backup.c
925 kes  Cleanup NOT NULL vs DEFAULT 0 in database creation.
926 kes  Tweak btape.
927 kes  Robert committed his low impact changes.
928 kes  I removed a size_t from the jcr.h definition.
929 kes  Update the tape regression scripts (still to be tested).
930 kes  Add gcc and gcc-c++ requires to srm as suggested by a user.
931 kes  Require done or quit to exit from in memory tree restore.
932 26Jun06
933 kes  Write install/uninstall of new manpages. There are now a
934      pile of man pages. Some of which need a lot of work.
935
936      ======================= Warning ==========================
937         The --mandir ./configure option now points to the top level
938         man directory.  The man files will be installed under
939         mandir/man8 and mandir/man1 as appropriate.
940      ==========================================================
941
942 kes  Add complete text of GPL to LICENSE.
943 kes  Implement job report that indicates where Storage and Pool
944      came from -kes  with overrides and Pool storage and NextPool,
945      it is all very complicated.
946 kes  Create a few common subroutines for backup.c and migrate.c
947 kes  Eliminate warning messages from tray-monitor.c
948 25Jun06
949 kes  Apply fix for scheduler for missing unlock_jobs().
950 kes  Clean out autoconf caches before rebuilding configure
951 kes  Fix the FreeBSD pthreads lib define updated by Dan.
952 kes  Add missing semicolon in src/console/console.c
953 kes  Add Robert's enhanced version of build-win32-cross-tools
954      as well as his patch file.
955 kes  Note, the new gcc options are likely to break building of
956      wx-console or the tray-monitor ...
957 24Jun06
958 kes  Implement Robert's suggestion to suppress printing compile lines.
959 kes  Detect GCC correctly (I hope)
960 kes  If using GCC (actually g++) add the following compiler flags
961      -fno-strict-aliasing -fno-exceptions -fno-rtti
962
963      ===================== Warning =============================
964      Turn on new bsnprintf() code.  This could cause print output
965      to look different.
966      ===========================================================
967
968 kes  Fix crypto when not using openssl. I previously overlooked this.
969 kes  Eliminate crypto type punning problems by eliminating void * and
970      using uint8_t * instead.
971 kes  Harden authentication failure in FD by single threading errors
972      and forcing a 6 second wait.
973
974      ===================== Warning =============================
975           Removed  'Accept Any Volume' directive.
976      ===========================================================
977
978 kes  Major cleanup and simplification of regress using shell functions
979      (more tests to be converted to new format)   
980 kes  Add detection of 64 bit Irix as indicated by user.
981 kes  Increment catalog database id from 9 to 10.
982 kes  Add a few of the new database fields to the various C++
983      structures.
984 kes  Implement code to fill in the most important new fields (e.g.
985      Media Enable).
986 kes  Ensure that most of the new fields are in create/get/insert/update.
987      More work to be done.
988 22Jun06
989 kes  Update some very old licenses in src/cats.
990 kes  Modify the database format for handling Migration jobs:
991       Add PriorJobId, RealEndTime to Job table
992       Delete MAC table
993       Remove Stripe from JobMedia record (not used, wasting space)
994       Add ScratchPoolId, RecyclePoolId, Enabled to Media record
995       Add Cost to Location table.
996 kes  Delete mac_record subroutines.
997 kes  Add new table values to create/update/get routines as appropriate.
998 kes  Update the update_tables and make_tables scripts.
999 kes  Make a first cut in using a union where multiple pointers (actually
1000      pointers to pointers) are stored.
1001 kes  Make some changes to base64.c suggested by Robert and others and add
1002      a small amount of documentation.
1003 kes  Add some changes suggested by Peter for Solaris (bregex...)
1004 kes  Make runscript.h always built because it needs to be pulled into
1005      more places.  In particular its RES was left out of a union.
1006 kes  Renumber the enum{} list in runscript.h to avoid starting from zero.
1007      This makes it slightly easier to detect uninitialized variables.
1008 14Jun06
1009 kes  Remove xpg4 lib from FreeBSD build as it is no longer needed and
1010      sometimes creates install problems.
1011 kes  Change a couple of %T in strftime to %H:%M:%S as seen in Robert
1012      Nelson's code.  More to do.
1013 kes  Convert a few store_bit to store_bool in filed_conf.c.       
1014 kes  DVD tweak to block.c as supplied by Uwe Muessel.
1015 04Jun06
1016 kes  Modify configure.in to check for typeof().
1017 kes  In findlib/attribs.c use typeof instead of templates if possible.
1018 01Jun06
1019 kes  Implement partial error messages for src/filed/acl.c
1020 kes  Fix return code to fail when doing update barcodes and
1021      Pool resource is not found. This previously caused Volumes
1022      to be labeled as cleaning tapes.
1023 kes  Small updates to projects.
1024 27May06
1025 kes  Add Eric Bollengier patch for new RunScript directive. It breaks
1026      compatibility between dird and fd.
1027 26May06
1028 kes  Prevent DVD code from rewriting label if the device cannot be
1029      opened read/write.
1030 kes  Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1031      fix Debian build bug.
1032 kes  Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1033 kes  Integrate manpages contributed by Jose Luis.
1034 kes  Update projects file.
1035 kes  Add manpages Makefile.in to configure.in
1036 kes  Remove installation of bacula.8 in scripts directory.
1037 24May06
1038 kes  Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1039      support.
1040        O_NOATIME is a open() flag which makes it possible to read a file without
1041        updating the inode atime (and also without the inode ctime update which
1042        happens if you try to set the atime back to its previous value). It also
1043        prevents a race condition when two programs are reading the same file, but
1044        only one does not want to change the atime. It's most useful for backup
1045        programs and file integrity checkers (and bacula can fit on both
1046        categories).
1047
1048        Recent versions of the Linux kernel and glibc have support for it (the
1049        glibc support being mostly copying the O_NOATIME definition to
1050        bits/fcntl.h). If there's no support for it on the kernel, trying to use
1051        it does nothing (since the kernel ignores unknown flags).
1052
1053        If the kernel has support for it, trying to use it either works, fails
1054        silently (mostly in remote filesystems), or returns errno=EPERM (if you
1055        are not either the owner of the file or root). A simple way to prevent the
1056        failure is to open the file without the flag and set it later with
1057        fcntl(F_SETFL), ignoring any EPERM errors.
1058 kes  Applied patch posted by Jaime Ventura to bug #570 to correct failure
1059      of restarted jobs to complete (due to a destroyed pthreads conditional
1060      variable used by the message thread).
1061 kes  Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1062      set to zero. 
1063 kes  Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1064 kes  Apply patch from Rudolf Cejka bug #614 to removed trailing
1065      colons in query.sql file.
1066 kes  Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1067      not to create orphans.
1068 kes  Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1069      in restore long listing.
1070 kes  Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1071      of incorrect MarkedId.
1072 kes  Apply patch from adioso bug #616 to correct text in manual (replace
1073      Director with File daemon).
1074 kes  Rework a few of the zlib changes so that they build properly.
1075
1076 21May06
1077 kes  Move DIR 'run' command to SD before starting the message thread
1078      as suggested by Cristopher Hull to avoid a race deadlock from
1079      two threads using the bsock structure.
1080 kes  Modify LICENSE to correct some problems pointed out by Debian.
1081 05May06
1082 kes  Correct EOF with no \n lex.c problem.
1083 kes  Tweak compat.h compat.cpp and merge with apcupsd
1084 kes  Add additional INFO messages if autochanger cannot be used.
1085
1086 02May06
1087 kes  Simplify Win32 Makefile
1088 kes  Correct count of buffers/bytes used by smartall.c
1089 kes  Updated compat.h after porting apcupsd to MinGW.
1090 01May06
1091 kes  Work on getting wx-console building on MinGW. wxWidgets now builds
1092      started adding Makefile ...
1093 kes  Moved MinGW library objects to src/win32/lib to reduce clutter.
1094 30Apr06
1095 kes  Reloading a bad configuration file doesn't kill director any more.
1096      Thanks to fix from Eric Bollengier.
1097 29Apr06
1098 kes  Fix problem of accents with new Win32 code.
1099 kes  Integrate Howard's VSS patch. Tweak it a bit. VSS now
1100      works in the MinGW build with the exception that there
1101      is a problem with accented characters -kes  i.e. there is
1102      some mapping problem with wide characters.
1103 kes  The code no longer compiles with Microsoft VC++.
1104 28Apr06
1105 kes  Start implementing Christopher's St.Bernard code.
1106 kes  Add Christopher's mods for opening files.
1107 kes  Strip \r \n from Win32 error messages (Christopher)
1108 kes  Add more info about Win32 system if unknown (Christopher)
1109 kes  Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1110 kes  Fix a number of incorrect strings marked for translation, when
1111      they should not be (e.g. commands).
1112 kes  Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1113      Patches supplied by user in bugs #608 and #599.
1114 kes  Use most recent of st_ctime and st_mtime in restore tree DIR
1115      listing. This fixes some problems with Win32 printing incorrect
1116      values.
1117 kes  Correct the clock shift comm time calculation between the DIR
1118      and the FD. It was added rather than subtracted.
1119 kes  Strip all backslashes in filenames to be restored on Win32
1120      machines -kes  the names should all be in Unix format, and if
1121      there are any backslashes it is most likely due to an improper
1122      FileSet definition, and the files will not otherwise be 
1123      restorable.
1124 kes  Remove lib/regex.c (replaced by bregex.c).
1125 kes  Delete src/win32/License.txt
1126 kes  Modify installer to install LICENSE
1127 26Apr06
1128 kes  Fix bug in build-win32-cross-tools script reported by Howard
1129 kes  Implement cross compiled bconsole
1130 25Apr06
1131 kes  Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1132 kes  Write first cut of README.mingw32
1133 kes  Add back ua_label barcode fix from Rufolf Cejka.
1134 kes  Integrate the majority of the Mingw cross-tools submission
1135      made by Howard Thomson. Everything compiles, with zlib, openssl,
1136      and VSS turned off. Linking needs a pthreads library ...
1137 23Apr06
1138 kes  Add 'Dir Status' button to the gnome console.
1139 kes  More work on migration.
1140 kes  Restore non-compatible base64 coding to permit compatibility.
1141 kes  Display heap stats in Storage daemon without debug level.
1142 22Apr06
1143 kes  Integrate most of the MinGW changes -kes  more to do.
1144 21Apr06
1145 kes  Implement using pg_config for finding PostgreSQL files.
1146      Fixes bug #600. Patch supplied by user.
1147 kes  Remove -t option from mktemp in mtx_changer.in and use
1148      working directory. Fixes bug #578.
1149 kes  Update job start time after the any run before job so that
1150      files created by the script are only backed up once. Fixes
1151      bug #599.
1152 kes  Strip trailing newline only from filenames entered in
1153      the restore command when reading a file. This permits
1154      the user to enter filenames with trailing spaces. Fixes
1155      bug #549. The user supplied a patch that I modified slightly.
1156 kes  Use the most recent time (st_mtime, st_ctime) in the dir
1157      command in restore. This gives the user a better idea of what
1158      the newest file really is. This fixes bug #574. The fix
1159      was suggested by the user.
1160 kes  Implement a compatible version of base64. This permits external
1161      programs to duplicate Bacula's base64 algorithm using standard
1162      routines. This fixes bugs #296, and 565. Patch submitted by   
1163      author of bug #565.  
1164      ================= Note ========================
1165      Previous Signatures stored in the database are no longer
1166      compatible with this. The main downside is for Verify jobs,
1167      and doing an InitCatalog run will fix the problem. Also, the
1168      authentication between the deamons is changed, so all daemons
1169      must be simultaneously upgraded.
1170      ==============================================
1171      If you don't like this fix, set:
1172        const bool compatible = true;
1173      to
1174        const bool compatible = false;
1175      in src/lib/base64.c
1176 20Apr06
1177 kes  Ensure that DB signature is never NULL.
1178 kes  Ensure that DB table names are not translated.
1179 kes  Fix scheduler to handle time skew (eg daylight savings).
1180 kes  Fix scheduler to use lock_jobs() to avoid most problems
1181      with reload. Window is now milliseconds.
1182 19Apr06
1183 kes  Apply patch from Christopher Hull
1184      kes  Allow multiple connections to database with different
1185        parameters.
1186      kes  Invalidate the scheduler when doing a reload. Fixes seg
1187        fault, but still 60 second window.
1188      kes  Additional info in Reschedule message.
1189      kes  Use set_jcr_job_status() everywhere to prevent loss of
1190        cancel, error.
1191      kes  Display peer IP in FD if error from connecting DIR.
1192      kes  Don't increment file count for DIRBEGIN.
1193      kes  Replace illegal characters in Win32 filename by _.
1194      kes  Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1195      kes  Hash hard link filenames rather than linked list.
1196      kes  Fix for security failure in chdir on Win32.
1197      kes  Add CreateDirectoryA/W win32 API entry points.
1198 kes  Add /silent option to Win32 FD for Install/Remove service.
1199 kes  Always print Heap statistics in FD.
1200 18Apr06
1201 kes  Remove the -f option from the chown in Makefile.in for more
1202      portability.
1203 kes  Change setting the group in Makefile.in to use chgrp for
1204      more portability.
1205 kes  Implement a write_store and read_store to replace
1206      dirstore in reserve.c
1207 kes  Implement a Bacula read/write lock for Python rather
1208      than using the Python lock to avoid recursive problems.
1209 kes  Correct the uninstall directory names in filed/Makefile.in
1210      as reported by a user.
1211 17Apr06
1212 kes  Correct some problems with database creation (new tables).
1213 kes  Replace a bunch of old 0x%x by %p.
1214 kes  Get first cut of Migration with Job selection working.
1215 16Apr06
1216 kes  Change store_bit() to store_bool() for the Spooling in 
1217      dird_conf.c -kes  bug reported by Robert Nelson.
1218 15Apr06
1219 kes  Correct Makefile bug found by Dan Langille.
1220 14Apr06
1221 kes  Correct Makefile for Solaris /bin/sh
1222 kes  Correct mtx-changer.in for Solaris /bin/sh
1223 kes  Abort if a conf resource does not have a Name =
1224 12Apr06
1225 kes  Change the name of the regex program to bregex.
1226 kes  Add the bwild program to the tools directory. It is similar
1227      to the bregex program.
1228 kes  Implement create bregex.h and bregex.c in src/lib from the
1229      Python regexp program.  
1230 kes  Use the new bregex.c to implement Regex expressions on Win32.
1231 11Apr06
1232 kes  More work on migration.
1233 kes  Implement wild program in tools directory for testing
1234      wild-cards. Almost identical to the regex program.
1235 kes  Up port VSS single thread locking code.
1236 kes  Replace N_(..) by NT_(...) to inhibit translation of
1237      commands.
1238 kes  Modify Makefile to change the permissions on Working Directory
1239      to 770 if the directory is created.
1240 kes  Do not fail the Makefile if changing the permissions or 
1241      owner/group on WorkingDir fails.
1242 kes  Remove early selection of Scratch Volumes in the recycling
1243      algorithm.
1244 kes  Correct the old recycling algorithm so that Scratch Volumes
1245      are selected when looking for a Volume in the changer.
1246 kes  Correct a typo in the Verify SQL reported by Joe Park.
1247 10Apr06
1248 kes  Remove automatic case folding on Windows FDs. You must
1249      explictly use the 'Ignore Case = yes' option.
1250 kes  Remove the code added to 1.38.6 and 1.38.7 that pulls a
1251      scratch volume in an Autochanger early in the 'recycling'
1252      algorithm.  
1253 09Apr06
1254 kes  Make weof() and clrerror() methods of class DEVICE.
1255 08Apr06
1256 kes  Tweak license to include Microsoft restrictions.
1257 kes  Move mysql.reconnect to after real_connect().     Thanks to
1258      Frank Sweetser for the patch.
1259 kes  Disallow a backslash in a File = directive (Windows junk)
1260      unless the string is quoted.                     
1261 kes  Apply Eric's patch to ua_label.c so that daemon protocol
1262      is not translated.
1263 kes  Add NT_ definition for strings that should not be translated.
1264 kes  Apply NT_() to ua_label.c
1265 kes  Remove timed wait for VSS on Win2K3 as it is not yet
1266      implemented.
1267 kes  Correct bacula.in script to reference bacula-ctl-xx in the
1268      sysconfig directory rather than the bin directory.
1269 26Mar06
1270 kes  Fix a long standing bug in the bacula start/stop scripts.
1271 kes  Attempt to add the new bacula-ctl-* files to the rpm.
1272 kes  Switch to using typeof() for list traversing to avoid
1273      as many FC5 g++ compiler warnings as possible.
1274 25Mar06
1275 kes  Split the bacula start/start script into four files:
1276       bacula         -kes  starts and stops calling other scripts
1277       bacula-ctl-dir -kes  starts/stops the director
1278       bacula-ctl-fd  -kes  starts/stops the File daemon
1279       bacula-ctl-sd  -kes  starts/stops the Storage daemon
1280 24Mar06
1281 kes  Create datestyle fix for PostgreSQL. Fixes bug #574.
1282 kes  Correct editing of JobId from int to int64 in fd_cmds.c
1283 kes  Eliminate FileSet name race with bash_spaces() and multiple
1284      threads by bashing in a local.
1285 kes  Fix error return from 'use storage' to print a correct error
1286      message rather than nothing.
1287 kes  Correct false re-read last block error message when two jobs 
1288      are simultaneously writing at the end of a tape.
1289 kes  Simplify exit conditions in the reserve.c code to avoid     
1290      possible non-release of reservation_lock().
1291 kes  Suffle lock order in reserve to avoid deadlock between
1292      reservation lock and device mutex.
1293 21Mar06
1294 kes  Initialize jcr mutex before first use. Thanks to Thorsten for
1295      tracking this down for me !!!! as it broke the Win32 build.
1296 20Mar06
1297 kes  Integrate addition of line count limitation to bsmtp -l from
1298      Sebastian Stark <stark at tuebingen.mpg.de>
1299 17Mar06
1300 kes  Implement regex test program in tools directory.
1301 kes  Attempt to fix time problem with bsmtp with foreign langs.
1302 kes  Add strip_trailing_newline() submitted by user.
1303 kes  Implement regex matching in migrate.c
1304 16Mar06
1305 kes  Fix bug #537 to allow arbitrary time to mount a volume for
1306      restore, if polling is turned on.     
1307 kes  If dir_user or dir-group is specified in ./configure apply it to
1308      the working-dir. Fixes bug #533.
1309 kes  If rescheduling a job cancel the previous incarnation with the SD.
1310      Fixes bugs #566 and 557.
1311 kes  Fix bug #567 do_message() definition type conflict.
1312
1313 14Mar06
1314 kes  Add more jcr methods and make mutex and use_count private.
1315 kes  Create lock/unlock methods for jcr.
1316 kes  Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1317      records to get to seek position.
1318 kes  Integrate patch from bug #561 to correct conio.c signal definitions.
1319 kes  Fix Rescheduling failed Jobs. Ensure that SD message thread 
1320      terminates correctly by doing pthread_kill(). Do not destroy
1321      SD cond wait variable between executions of the job. Use local
1322      mutex for cond variable to avoid blocking jcr chain. Fix poor 
1323      use of jcr use count in jobq.c for restarted jobs.
1324 kes  Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1325      lib/jcr.c -kes  prevents locking the jcr chaing.
1326 kes  Apply patch from bug #564, which corrects listing volumes with
1327      multiple autochangers. Apply same fix to next volume list.
1328 kes  Fix bug #562 where restore bootstrap file is not unique.
1329 kes  More details in implementing David's migration syntax proposal.
1330 kes  Save and restore dcr when swapping drives so that if we have
1331      a write dcr it is not lost.
1332 kes  Use new routine lock_reservations() to lock the reservations
1333      system, and call it while looking for a volume in askdir.c.
1334      This could possibly fix bug #543.
1335 kes  Stop SD command loop if job is canceled.
1336
1337 08Mar06
1338 kes  Remove old code from findlib/create_file.c
1339 kes  Rename mac.c migrate.c
1340 kes  Add user friendly display of VolBytes in job report.
1341 kes  Rename target... to previous... to make it a bit easier to
1342      understand.
1343 kes  Add selection type and selection pattern to Migration (idea
1344      given by David Boyes). 
1345
1346 04Mar06
1347 kes  The po files should now be current.
1348 kes  Fix new sql_use_result() code to properly release the
1349      buffers in all cases.
1350 kes  Use the keyword ujobid to mean the unique job id; job or jobname
1351      to mean the Job name given on the Name directive, and jobid to
1352      be the numeric (non-unique) job id.
1353 kes  Allow listing by any of the above.
1354 kes  Add the user friendly job report code for reporting job elapsed time
1355      and rates with suffexes from John Kodis <kodis at comcast.net>.
1356 kes  Add Priority and JobLevel as Python settable items.
1357 kes  Use TEMPORARY table creation where the table is created by
1358      Bacula.
1359 kes  Add new code submitted by Eric for waiting on specific jobid.
1360 kes  Add ACL checking for the dot commands.
1361 kes  Fix restore of writable FIFOs.
1362 kes  Fix a bug in bpipe where the string was freed too early.
1363 27Feb06
1364 kes  Modify the Python class examples to inherit object -kes  new way
1365      of defining classes. Patch from Felix Schwarz.
1366 kes  Implement jobuid to replace old usage of job in keywords as
1367      suggested by Eric Bollengier.
1368 kes  Apply patch for enhancing wait from Eric Bollengier. On can now:
1369       wait  (wait for all jobs to stop)
1370       wait jobid=nn
1371       wait jobuid=unique id
1372       wait job=job-name
1373 kes  Implement write variables for Python to set Priority (anytime), and
1374      Job Level, only during JobInit event.
1375 26Feb06
1376 kes  Fix the block listing bug pointed out by Arno.
1377 kes  Update the po files at Eric's request.
1378 24Feb06
1379 kes  Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to 
1380      accept time qualifiers.
1381 kes  Make catalog respect ACL.
1382 kes  Add recycle count to Media record.
1383
1384 Changes to 1.39.6-beta1 24Feb04
1385 23Feb06
1386 kes  Add Rudolf Cejka's new rc-chio-changer.
1387 kes  Implement pulling Volume from Scratch Pool if the
1388      Volume is in the autochanger.
1389 kes  Implement additional command arguments for update Volume.
1390
1391 Changes to 1.39.5 
1392 22Feb06
1393 kes  Back port changes to 1.38.5
1394 kes  Fix recycle SQL for StorageId.
1395 kes  Fix misplaced quote in mtx-changer script.
1396 20Feb06
1397 kes  Note. Your database must be updated, or you must create 
1398      a new database. I have not yet incremented the database level.
1399 kes  Add Location table. 
1400 kes  Add LocationId, DeviceId, and MediaTypeId to Media record.
1401 18Feb06
1402 kes  Implement create/get mac record in database for adding extended
1403      Migration data to the job record.
1404 kes  Add new MAC table to update/make database scripts.
1405 kes  Return Storage name used when getting VolumeNames for a job.
1406 kes  Change bsr file keyword Storage to Device, which is more accurate.
1407 kes  Ensure that Mac records are pruned/purged.
1408 kes  Tweak SD tools to deal with changing media type.
1409 kes  Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1410 kes  Pass pointer to dcr pointer to acquire_device_for_read() so
1411      that the subroutine can switch devices, and hence dcrs.
1412 kes  Modify the multiple MediaType read code to re-use the same
1413      dcr when switching devices. This makes the code much more
1414      robust.
1415 kes  Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1416      from a table for restore.
1417 kes  Add Storage name to VolParams, but it really should be Device.
1418 14Feb06
1419 kes  Add disk-changer to scripts directory + configure/Makefile
1420 kes  Eliminate PoolId from jcr -kes  it is in jcr->jr.PoolId
1421 kes  Implement store_bit scanner to replace store_yesno.     Mostly done.
1422 kes  Implement new store_bool that stores in a bool. 
1423 kes  Add true/false to yes/no conf directives.
1424 kes  Make first cut at changing appropriate store_yesno to store_bool.
1425 kes  Complete implementation of Pool storage devices.
1426 kes  Move starting clones to job.c
1427 kes  Move create_restore_bootstrap_file() to job.c
1428 kes  Make copy_storage() more general to be able to handle
1429      Pool storage.
1430 kes  Cleanup a lot of migration code for manual running, including
1431      using Pool storage.
1432 kes  Move getting a scratch Volume into a subroutine.
1433 kes  Make all places a Volume that is added to a pool to 
1434      respect max vols.
1435 kes  Fix bug in autochanger recycle code (improper edit 64 bit).
1436 kes  Fix segfault in restore command when no value specified.
1437 kes  Start adding code to handle multiple MediaTypes in restore.
1438 kes  Eliminate race condition in getting Volume name for
1439      two drive autochanger.
1440 kes  More debug code in autochanger.
1441 kes  Add storage keyword to bootstrap file, add parsing.
1442 kes  Move slot in bsr file into Volume record as there will be
1443      a different slot for each Volume.
1444 kes  Create reserve.h
1445 07Feb06
1446 kes  Implement Pool storage overrides.
1447 06Feb06
1448 kes  Implement first cut of Migration.
1449 kes  Implement mysql_use_result() from patch by Karl Hakimian.
1450      This reduces significantly the memory consumption during
1451      the restore tree building, and hence runs faster too.
1452 kes  Implement StorageId patch supplied by user (reggie) in bug
1453      #536.  This should permit Bacula to work correctly with two
1454      autochangers.
1455 kes  Implement Job listing variations suggested by a user.
1456 kes  Move updating bootstrap code in backup.c to subroutine
1457      update_bootstrap_file().
1458 kes  Add new job status elapsed time and bytes written user
1459      friendly job report output patch sent by John Kodis
1460      <kodis at comcast.ne>.
1461 kes  Implement a storage list in Pools.
1462 kes  Separate out setup_job() code from run_job().
1463 kes  Get migration working -kes  lots of changes in mac.c in both
1464      DIR and SD.
1465 kes  Apply patch from user (Eric Bollengier I think) that fixes a     
1466      DIR crash when no arguments are supplied to a dot command.
1467 kes  Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1468 kes  Fix command arg name->volume in label command of gnome-console.
1469 kes  Fix SD acquire.c to release correct DCR by explicitly testing
1470      on the dcr address rather than trying to devine if it is a read
1471      or write dcr.  This failed in error conditions when the device was
1472      not fully setup.
1473  
1474 30Jan06
1475 kes  Apply user supplied patch for more readable rate output
1476      in job report.
1477 kes  Continue implementing migration.
1478 kes  Implement support for removable filesystems in SD.
1479 kes  Ensure that btraceback scripts can be read by anyone.
1480 kes  Replace dvd-freespace and dvd-writepart by dvd-handler.
1481 kes  Correct bug where canceling restore before the FD contacts
1482      the SD causes the drive to be left in read mode.
1483 kes  Move ofline_or_rewind into DEVICE::close().
1484 kes  Eliminate close_device.
1485 kes  Convert several dev subroutines to methods (e.g. bsf,
1486      eod, ...)
1487 kes  Eliminate force_close_device().
1488 kes  Implement Device Type directive in Device resource that
1489      can have values File, Tape, Fifo, DVD, or Prog.
1490 kes  Add has_cap() method to Device.
1491 Changes to 1.39.4
1492 17Jan06
1493 kes  Add patch from bug #527 to allow RedHat user to specify
1494      options/user/group for starting each daemon in      
1495      /etc/sysconf/bacula.
1496 16Jan06
1497 kes  Add two new queries to query.sql provided by Arno. One
1498      list volumes known to the Storage device, and the other
1499      lists volumes possibly needing replacement (error, ...).
1500 15Jan06
1501 kes  Add periodic (every 24 hours) garbage collection of memory 
1502      pool by releasing free buffers.
1503 14Jan06
1504 kes  Correct bug counting sized (for display only) in smartall.c
1505 kes  Print FD mempool stats if debug > 0 rather than 5.
1506 12Jan06
1507 kes  Make db_lock() mutex error fail the job rather than abort
1508      Bacula.  Canceling the job caused the mutex to fail.
1509 kes  Correct bug in alist.c that re-allocated the list if the
1510      number of items goes to zero.
1511 kes  Move the reservation system thread locking to the top level
1512      so that one job at a time tries all possible drives before
1513      waiting.
1514 kes  Implement a reservation 'fail' message queue that is built            
1515      and destroyed on each pass through the reservation system.
1516      These messages are displayed in a 'Jobs waiting to reserve
1517      a drive' list during a 'status storage='.  Note, multiple
1518      messages will generally print for each JobId because they
1519      represent the different problems with either the same drive
1520      or different drives.  If this output proves too confusing
1521      of voluminous, I will display it only when debug level 1
1522      or greater is enabled in the SD.
1523 11Jan06
1524 kes  Add enable/disable job=<job-name>.     This command prevents
1525      the specified job from being scheduled. Even when disabled,
1526      the job can be manually started from the console.
1527 kes  During 'update slots' clear all InChanger flags where the
1528      StorageId is zero (old Media records).
1529
1530 Beta release 1.38.4:
1531 09Jan06
1532 kes  Fix autochanger code to strip leading spaces from returned
1533      slots number. Remove bc from chio-changer.
1534 kes  Back port a bit of 1.39 crypto code to reduce diffs.
1535 kes  Fix first call to autochanger that missed close()ing the
1536      drive. Put close() just before each run_program().  Fixes
1537      Arno's changer bug.
1538 07Jan06
1539 kes  Add PoolId to Job record when updating it at job start time.
1540 06Jan06
1541 kes  Pull in more code from 1.39 so that there are fewer file
1542      differences (the new ua_dotcmds.c, base64.h, crypto.h
1543      hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c 
1544      util.c. Aside from ua_dotcmds.c these are mostly crypto
1545      upgrades.
1546 kes  Implement new method of walking the jcr chain. The
1547      incr/dec of the use_count is done within the walking
1548      routines.  This should prevent a jcr from being freed
1549      from under the walk routines.
1550
1551
1552 Changes to 1.39.3:
1553 04Jan06
1554 kes  Start implementing Verify list output.
1555 kes  Move the suitable_drive flag to a better place to prevent
1556      premature termination of the reservation if all drives
1557      are busy -kes  should fix Arno's diff/inc pool failures.
1558 26Dec05
1559 kes  Add mutex to single thread VSS code in Win32.
1560 22Dec05
1561 kes  Simplify code in askdir.c that waits for creating an appendable
1562      volume so that it can handle multiple returns from the wait
1563      code.
1564 kes  Modify the wait code to permit multiple returns.
1565 kes  Return a zero when 'autochanger drives' is called and
1566      it is not an autochanger.
1567 kes  Make rewind_dev() a method taking a DCR as an argument.
1568      This permits closing and reopening the drive if the
1569      rewind fails as happens if the drive was loaded while the
1570      file descriptor was open. This refreshes the file descriptor.
1571 kes  Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1572      if the device is open or not.  This should eliminate
1573      Arnos problem.
1574 kes  Return error if reserve cannot find at least one suitable device.
1575 kes  Make wait_for_sysop() return correct state information.
1576 kes  Fix Win32 state file problem. write was not using compat
1577      code. This should fix bug #500.
1578 21Dec05
1579 kes  Modify gui on command to set only GUI mode and not batch.
1580 kes  Modify .messages command to always print messages regardless
1581      of the mode.
1582 kes  If GUI mode is on, suppress automatic printing of 
1583      You have messages. 
1584 kes  Delete old bnet packet code.
1585 kes  Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1586      wx-console. -kes  not implemented because bconsole must be updated.
1587 kes  Modify restore command in wx-console to set gui on and to use
1588      only .messages instead of messages.  Hopefully this fixes bug
1589      #514.
1590 kes  Fix seg fault in exit of acquire when canceling a job --
1591      reported by Wolfgang Denk
1592 kes  Pull in latest reservation system changes from 1.38
1593 kes  Make .messages command always print messages regardless
1594      of the automessages flag.
1595 17Dec05
1596 kes  Fix seg fault if user labels a drive directory bug #513
1597 kes  Remove quotes around Version as it breaks things.
1598 16Dec05
1599 kes  Merge in Aleksandar Milivojevic's mods to the spec file.
1600 kes  Apply sparse code fix for raw drives and fifos. Bug 506
1601 kes  Thorsten fixed Unicode cd problem with wx-console bug 505.
1602 14Dec05
1603 kes  Correct reservation system to do a last ditch try
1604      for any mounted volume, then anyone anywhere.
1605 kes  Add quotes around table Version because of
1606      error in MySQL 4.1.15 -kes  bug report submitted.
1607 kes  Correct some minor problems with btape in the fill
1608      command.
1609 kes  Updates to ssh-tunnel from Joshua Kugler.
1610 kes  Added a report.pl program from Jonas Bjorklund.               
1611 kes  Simplify the O_NONBLOCK open() code for tape drives,
1612      and always open nonblocking.
1613 kes  Do not wait for open() if EIO returned (shouldn't happen).
1614 kes  Eliminate 3 argument to tape open().
1615 kes  Correct the slot # edited in the 3995 Bad autochanger unload
1616      message.
1617 kes  With -S on bscan (show progress) do not divide by zero.
1618 13Dec05
1619 kes  Make cancel pthread_cond_signal() pthread_cond_broadcast().
1620 kes  When dcr is freed, also broadcast dev->wait_next_vol signal.
1621 kes  Remove unused code in wait_for_device.     
1622 kes  Make wait_for_device() always return after 60 seconds of wait.
1623
1624 Changes to 1.39.2:
1625 13Dec05
1626 kes  Add stubs for non-crypto build.
1627 12Dec05
1628 kes  Use localhost if no network configured
1629 11Dec05
1630 kes  Eliminated duplicate MaxVolBytes in cat update -kes  bug 509.
1631 kes  Remove debug print.
1632 kes  Add bail_out in error during state file reading.
1633 10Dec05
1634 kes  Merge changes made to 1.38.3 into HEAD
1635 kes  Add stubs for pygtk-console code
1636 kes  Create Makefile.in for pygtk-console code
1637 09Dec05
1638 kes  Merge updates into 1.38 branch
1639 kes  Update specs to include mysql4 define.
1640 kes  Fix when attributes are sent, must be after binit().
1641 kes  Stop read_record() if status not ok in second loop.
1642 kes  Return rec->FileIndex in dcr->VolLastIndex for normal
1643      and partial records in read_record().  This allows bscan
1644      to get FileIndex at EOT correct.
1645 kes  Fix butil.c to correctly set dcr -kes  fixes seg fault in bls.
1646 08Dec05
1647 kes  Fix Win32 built to work with new crypto code.
1648 kes  Apply patch supplied by user (slightly modified) to fix
1649      correct detection of holes in block devices and FIFOs. 
1650      Bug # 506.
1651 kes  Apply patch supplied by user (slightly modified) 
1652      to fix SD hang with multiple pools and bad client
1653      IP. Fixes bug # 508.
1654 07Dec05
1655 kes  Add nagios plugin to the examples directory. Submitted by
1656      Christian Masopust.
1657 kes  Remove warning message about multiple saves of hardlinked files
1658      from find_one.c as it can generate too many warning messages.
1659 kes  Modify most restore error messages to be queued so that they
1660      appear at the end of the job rather than mixted with the restore
1661      listing where they could be 'lost'.
1662 06Dec05
1663 kes  Reset timeout values before select() per patch from 
1664      Frank Sweetser for problems with non-blocking sockets.
1665 kes  Unlink the state file if either reading or writing it gets
1666      errors.  Hopefully this will fix Win32 exit problems.
1667 kes  Add sanity check in append.c to ensure that dcr is not NULL.
1668      This can happen if multiple drive autochanger SCSI control
1669      channel and drive indicies do not correspond.
1670 05Dec05
1671 kes  Get next volume from Scratch pool before creating a volume.
1672 kes  Set new Pool defaults in Vol when moved from Scratch Pool.
1673 kes  Remove argument from create_bacula_database for SQLite as it
1674      caused an error.
1675 kes  Add back index code so that two drive autochangers can get
1676      a second tape.
1677 kes  Change a bunch of debug levels to aid debugging autochangers.
1678 kes  Fix reservation so that mutexes are properly applied.
1679 kes  Rework reservation algorithm so that two drives can be used
1680      at the same time.
1681 04Dec05
1682 kes  Landon merged his data encription changes into the HEAD
1683 kes  Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at 
1684      If this patch is applied, the number of days can be specified with
1685      'list nextvol days=xx'
1686      or
1687      'status dir days=xx'
1688      My use case is to be able to preview the next scheduled job (and the 
1689      next tape to be used) on fridays if there are no scheduled jobs during 
1690      the weekend.
1691 Changes to 1.39.1:
1692 03Dec05
1693 kes  Fix font code in gnome2 console user patch. Fixes bug #501.
1694 kes  Fix malformatted bnet error message that caused seg fault
1695      fixes bug 502
1696 kes  Applied user patch to improve README.vc8 in src/win32.
1697 29Nov05
1698 kes  Add Migrate, Copy, Archive Job types (some where there)
1699 kes  Correct some more editing of JobId's (for 64 bit compatibility).
1700 kes  Ensure that StorageId is stored in Media record when ever possible.
1701 kes  Add Migration Job to Job.
1702 kes  Add Migration Time, Migration High Bytes, Migration Low Bytes
1703      Next Pool to Pool resource.
1704 kes  Add more code to mac.c (migration archive copy).
1705 kes  Change Start Storage daemon job to require read and write storage
1706      pointers.
1707 kes  Pass read storage data to SD as well as write storage data.
1708 kes  Remove old code from winservice.cpp
1709 kes  Break on error in scan.
1710 kes  Fix typo in signal.c
1711 kes  Separate read/write DCR in SD.     Add jcr->read_dcr.
1712 kes  Cleanup how find_device() works.
1713 kes  Add read output to Status in SD.
1714 Changes to 1.39.0:
1715 23Nov05
1716 kes  Add red-black btree routines
1717 21Nov05
1718 kes  Remove abs() in bfile.c so that it compiles on Solaris. 
1719      Bug #491.
1720 20Nov05
1721 kes  Fix crash in tray-monitor when daemon disconnects. Bug #479.
1722 kes  Fix bnet-server bug found on OpenBSD. Bug #486
1723 kes  Fix cancel failure bug. Bug #481
1724 kes  Fix failure when Pool name has spaces. Bug #487      
1725 kes  Fix SD crash in autochanger code. Mutex failure. Bug #488
1726 kes  Fix a couple of free()s in src/filed/acl.c
1727 kes  Fix memory overrun in bfile.c in building OS X resource
1728      fork filename. Bug #489 
1729 kes  Add Pool name to SD status output.
1730 14Nov05
1731 kes  Apply SunOS patch for ACLs submitted by David Duchscher.                     
1732 kes  Make sure to set storage before trying to set drive.
1733 kes  Add bacula_mail_summary.sh to examples directory. It makes
1734      a single email summary of any number of jobs. Submitted
1735      by Adrew J. Millar.
1736 kes  Make sure when we do a mount to unblock the device even
1737      if the drive could not be opened.  
1738 13Nov05
1739 kes  Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1740      and correct a few minor problems to make it build on Linux.
1741 10Nov05
1742 kes  Remove delete of CVS from all Makefiles
1743 kes  Fix seg fault when clicking on Add button in wx-console
1744      restore panel.  Bug #470.
1745 kes  Fix copyright date and URL typo -kes  bug #468.
1746 kes  Change autostart install for FreeBSD to look for rc.conf     
1747      rather than rc.local as suggested fix for bug #466.
1748 kes  Apply patch supplied by Eric Bollengier to fix PostgreSQL       
1749      grant on status. Bug #465
1750 kes  Apply patch supplied by Eric Bollengier to fix PostgreSQL
1751      update script. Bug #464
1752 kes  Tweak #ifdefing a bit in new Win32 stream code.
1753 kes  Fix #ifdeffing for FD_NO_SEND_TEST.
1754 kes  Add documentation of performance #defines