2 Release Notes for Bacula 1.38.3
4 Bacula code: Total files = 424 Total lines = 140,955 (*.h *.c *.in)
5 20,440 additional lines of code since version 1.36.3
8 - This is mainly a bug release fix. In addition, the multiple drive
9 reservation algorithm has been rewritten.
10 - Simplify the O_NONBLOCK open() code for tape drives,
11 and always open nonblocking.
12 - Do not wait for open() if EIO returned (shouldn't happen).
13 - Eliminate 3 argument to tape open().
14 - Correct the slot # edited in the 3995 Bad autochanger unload
16 - With -S on bscan (show progress) do not divide by zero.
17 - Make cancel pthread_cond_signal() pthread_cond_broadcast().
18 - When dcr is freed, also broadcast dev->wait_next_vol signal.
19 - Remove unused code in wait_for_device.
20 - Make wait_for_device() always return after 60 seconds of wait.
21 - Use localhost if no network configured
22 - Eliminated duplicate MaxVolBytes in cat update -- bug 509.
23 - Update specs to include mysql4 define.
24 - Return rec->FileIndex in dcr->VolLastIndex for normal
25 and partial records in read_record(). This allows bscan
26 to get FileIndex at EOT correct.
27 - Fix butil.c to correctly set dcr -- fixes seg fault in bls.
28 - Apply patch supplied by user (slightly modified) to fix
29 correct detection of holes in block devices and FIFOs.
31 - Apply patch supplied by user (slightly modified)
32 to fix SD hang with multiple pools and bad client
34 - Add nagios plugin to the examples directory. Submitted by
36 - Remove warning message about multiple saves of hardlinked files
37 from find_one.c as it can generate too many warning messages.
38 - Reset timeout values before select() per patch from
39 Frank Sweetser for problems with non-blocking sockets.
40 - Unlink the state file if either reading or writing it gets
41 errors. Hopefully this will fix Win32 exit problems.
42 - Get next volume from Scratch pool before creating a volume.
43 - Set new Pool defaults in Vol when moved from Scratch Pool.
44 - Remove argument from create_bacula_database for SQLite as it
46 - Fix reservation so that mutexes are properly applied.
47 - Rework reservation algorithm so that two drives can be used
49 - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
50 If this patch is applied, the number of days can be specified with
51 "list nextvol days=xx"
54 My use case is to be able to preview the next scheduled job (and the
55 next tape to be used) on fridays if there are no scheduled jobs during
57 - Fix font code in gnome2 console user patch. Fixes bug #501.
58 - Fix malformatted bnet error message that caused seg fault
60 - Applied user patch to improve README.vc8 in src/win32.
61 - Ensure that StorageId is stored in Media record when ever possible.
62 - Remove old code from winservice.cpp
63 - Break on error in scan.
64 - Fix typo in signal.c
65 - Separate read/write DCR in SD. Add jcr->read_dcr.
66 - Cleanup how find_device() works.
67 - Remove abs() in bfile.c so that it compiles on Solaris. Bug #491.
70 - Fix crash in tray-monitor when daemon disconnects. Bug #479.
71 - Fix bnet-server bug found on OpenBSD. Bug #486
72 - Fix cancel failure bug. Bug #481
73 - Fix failure when Pool name has spaces. Bug #487
74 - Fix SD crash in autochanger code. Mutex failure. Bug #488
75 - Fix a couple of free()s in src/filed/acl.c
76 - Fix memory overrun in bfile.c in building OS X resource
77 fork filename. Bug #489
78 - Add Pool name to SD status output.
79 - Add Python install dir for Solaris to configure. Bug #492
82 - Corrected ACL for Solaris (David Duchscher and Attila Fulop).
83 - Add bacula_mail_summary.sh to examples directory. It makes
84 a single email summary of any number of jobs. Submitted
86 - Unmount command now unloads autochanger.
87 - Fix hang in FD (Martin Simmons)
88 - Fix Win98 stat() problem in FD (Thorsten Engel)
89 - Fix update slots which did not clear missing tapes.
90 - Fix autostart install for FreeBSD (user reported)
91 - Fix several problems with PostgreSQL scripts (Eric Bollinger)
92 - Critical: allow restore of the first file of non-portable Win32 backup.
93 - Important: with muliple concurrent jobs the autochanger could get
94 confused because of a missing mutex.
95 - Fix accessing last slot in label and update slots.
96 - Modify configure.in to add execute option to sqlite3 catalog
98 - Create update_xxx_table_8_to_9 scripts for updatedb
99 - Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
100 autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
101 - Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
102 by user. Fixes bug #456.
103 - AMD64 users see compiler bug warning below!!!!!!!!!
105 Major Changes in 1.38:
106 - Fixed out of order Volumes in restore.
107 - Improved algorithm for reserving drives in multiple drive
108 autochangers. Autochange users MUST use the new Autochanger
109 resource in the Storage daemon.
110 - There is a new database format that is not compatible
111 with previous databases. You must upgrade if converting
112 from 1.36.x. No changes from version 1.37.30.
113 - The Director, Storage daemon, and File daemons are
114 Deamons are not compatible with prior versions.
115 All FDs must be upgraded at the same time.
116 - Support for ANSI/IBM labels.
117 - Faster database inserts due to combining the MD5/SHA1 into
118 the attributes record, eliminating one INSERT/file backed up.
119 - Python Event support has been added. See below for
120 configuration and details. The implementation is somewhat minimal,
121 so the functionality is not complete. The Python interface
122 has not been extensively tested, so please consider it BETA.
123 - DVD writing support, using parts, and some new directives in
124 the Device resource of the Storage configuration file thanks
125 to Nicolas Boichat. Please note that this code is still
126 BETA and should be carefully tested before using in
128 - Seven new options keywords in a FileSet resource:
129 ignorecase, fstype, hfsplussupport, wilddir, wildfile, regexdir,
130 and regexfile thanks to Pruben Guldberg). See below for details.
131 - Restore of all files for a Job or set of jobs even if the file
132 records have been removed from the catalog.
133 - Restore of a directory (non-recursive, i.e. only one level).
134 - Support for TLS (ssl) between all the daemon connections thanks
136 - Any Volume in the Pool named Scratch may be reassigned to any
137 other Pool when a new Volume is needed.
138 - You may clone a Job and thus write (almost) the same data
139 to multiple Volumes simultaneously (see below). Actually,
140 any Job may start any other Job with this mechanism, so it
141 also be used to group jobs.
142 - Unicode filename support for Win32 (thanks to Thorsten Engel)
143 - Volume Shadow Copy support for Win32 thus the capability to
144 backup exclusively opened files (thanks to Thorsten Engel).
145 A VSS enabled Win32 FD is available. You must explicitly
146 turn on VSS with "Enable VSS = yes" in your FileSet resource.
147 - New manual format with an index (thanks to Karl Cunningham).
148 - New Web site format (thanks to Michael Scherer).
150 - Web-bacula, previously a separate project by Juan Luis Frances,
151 is now included in the Bacula GUI release. This is a management
152 level tool for reporting the state of Bacula jobs.
153 - The code is now Internationalized so that it can be localized
154 in native languages. Thanks to Nicolas Boichat.
157 - New Job directive "Prefer Mounted Volumes = yes|no" causes the
158 SD to select either an Autochanger or a drive with a valid
159 Volume already mounted in preference. If none is available,
160 it will select the first available drive.
161 - New Run directive in Job resource of DIR. It permits
162 cloning of jobs. To clone a copy of the current job, use
163 Run = "job-name level=%l since=\"%s\""
164 Note, job-name is normally the same name as the job that
165 is running but there is no restriction on what you put. If you
166 want to start the job by hand and use job overrides such as
167 storage=xxx, realize that the job will be started with the
168 default storage values not the overrides. The level=%l guarantees
169 that the chosen level of the job is the same, and the since=...
170 ensures that the job uses *exactly* the same time/date for incremental
171 and differential jobs. The since=... is ignored when level=Full.
172 A cloned job will not start additional clones, so it is not possible
174 - New Options keywords in a FileSet directive (backported to 1.36.3):
176 Will do a wild card match against directories (files will not
179 Will do a wild card match against files (directories will not
182 Will do a regular expression match against directories (files
183 will not be matched).
185 Will do a regular expression match against files( directories
186 will not be matched).
187 - IgnoreCase = yes | no
188 Will ignore case in wild card and regular expression matches.
189 This is handy for Windows where filename case is not significant.
191 where string is a filesystem type: ext2, jfs, ntfs, proc,
192 reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. For ext3
193 systems, use ext2. You may have multiple fstype directives
194 and thus permit multiple filesystem types. If the type
195 specified on the fstype directive does not match the
196 filesystem for a particular directive, that directory will
197 not be backed up. This directive can be used to prevent
198 backing up non-local filesystems.
199 - HFS Plus Support = yes | no
200 If set, Mac OS X resource forks will be saved and restored.
201 - Label Type = ANSI | IBM | Bacula
202 Implemented in Director Pool resource and in SD Device resource.
203 If it is specified in the SD Device resource, it will take
204 precedence over the value passed from the Director to the SD.
205 - Check Labels = yes | no
206 Implemented in the SD Device resource. If you intend to read
207 ANSI or IBM labels, this *must* be set. Even if the volume
208 is not ANSI labeled, you can set this to yes, and Bacula will
209 check the label type.
210 - Scripts Directory = <directory> name. Defines the directory from
211 which Bacula scripts will be called for events. In fact, Bacula
212 appends this name to the standard Python list of search directories,
213 so the script could also be in any of the Python system directories.
214 - In FileSet, you can exclude backing up of hardlinks (if you have
215 a lot, it can be very expensive), by using:
217 in the Options section. Patch supplied by David R Bosso. Thanks.
218 - MaximumPartSize = bytes (SD, Device resource)
219 Defines the maximum part size.
220 - Requires Mount = Yes/No (SD, Device resource)
221 Defines if the device require to be mounted to be read, and if it
222 must be written in a special way. If it set, the following directives
223 must be defined in the same Device resource:
224 + Mount Point = directory
225 Directory where the device must be mounted.
226 + Mount Command = name-string
227 Command that must be executed to mount the device. Before the command
228 is executed, %a is replaced with the Archive Device, and %m with the
230 + Unmount Command = name-string
231 Command that must be executed to unmount the device. Before the
232 command is executed, %a is replaced with the Archive Device, and
233 %m with the Mount Point.
234 + Write Part Command = name-string
235 Command that must be executed to write a part to the device. Before
236 the command is executed, %a is replaced with the Archive Device, %m
237 with the Mount Point, %n with the current part number (0-based),
238 and %v with the current part filename.
239 + Free Space Command = name-string
240 Command that must be executed to check how much free space is left
241 on the device. Before the command is executed, %a is replaced with
242 the Archive Device, %m with the Mount Point, %n with the current part
243 number (0-based), and %v with the current part filename.
244 - Write Part After Job = Yes/No (DIR, Job Resource, and Schedule Resource)
245 If this directive is set to yes (default no), a new part file will be
246 created after the job is finished.
247 - A pile of new Directives to support TLS. Please see the TLS chapter
251 - "python restart" restarts the Python interpreter. Rather brutal, make
252 sure no Python scripts are running. This permits you to change
253 a Python script and get Bacula to use the new script.
255 New configure options:
256 - --with-libintl-prefix for defining alternate locations for
257 the NLS internationalization libraries. Not normally required.
258 - --datadir for defining where the language files will be installed
259 required only if you do not want the default /usr/share.
262 - If you use an Autochanger, you MUST update your SD conf file
263 to use the new Autochanger resource. Otherwise, certain commands
264 such as "update slots" may not work.
265 - You must add --with-python=[DIR] to the configure command line
266 if you want Python support. Python 2.2, 2.3 and 2.4 should be
267 automatically detected if in the standard place.
268 - When linking with --with-python, there are a few warnings that
270 - You must either create a new catalog database or upgrade your
271 old database. After installation, run from your scripts
274 ./upgrade_bacula_tables
276 You can also find this script in the <bacula-source>/src/cats
278 - The Director, Storage daemon, and File daemons are
279 Deamons are not compatible with prior versions.
280 All FDs must be upgraded at the same time.
281 - You must add --with-openssl to the configure command line if
282 you want TLS communications encryption support.
283 - Disk seeking during restores does not yet work correctly in
284 all cases, so it is turned off.
285 - Note, with gcc (GCC) 4.0.1 20050727 (Red Hat 4.0.1-5) on an
286 AMD64 CPU running 64 bit CentOS4, there is a compiler bug that
287 generates bad code that causes Bacula to segment fault.
288 Typically you will see this in the Storage daemon first. The
289 solution is to compile Bacula ensuring that no optimization is
290 turned on (normally it is -O2).
291 This same compiler bug has been reported and confirmed with
292 gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux) running on
293 an AMD64 CPU. This for the moment, I would recommend that all
294 users of GCC 4.0.1 or greater turn off all optimization when
299 - Security fixes for temp files created in mtx-changer, during
300 ./configure, and during making of Rescue disk.
301 - A new script, dvd-handler, in the scripts directory,
302 which is designed to be used as parameters to Write Part Command and
303 Free Space Command. They need the dvd+rw-tools to be installed
304 (http://fy.chalmers.se/~appro/linux/DVD+RW/) AND, the growisofs
305 program must be patched using the
306 <bacula-source>/patches/dvd+rw-tools-5.21.4.10.8.bacula.patch
307 You must have Python installed to run the scripts.
308 - Part files support: File volumes can now be split into multiple
309 files, called "parts".
310 - For the details of the Python scripting support, please see the new
311 Python Scripting chapter in the manual.