8 Unicode in Win32 Thorsten Engel (done)
9 VSS Thorsten Engel (in beta testing)
10 Version 1.37 Kern (see below)
11 ========================================================
14 #3 Migration (Move, Copy, Archive Jobs)
15 (probably not this version)
16 #7 Single Job Writing to Multiple Storage Devices
17 (probably not this version)
19 ## Create a new GUI chapter explaining all the GUI programs.
22 - Make "update slots" when pointing to Autochanger, remove
23 all Volumes from other drives. "update slots all-drives"?
27 04-Jul 13:01 MainSD: Rufus.2005-07-04_01.05.02 Warning: Director wanted Volume
29 Current Volume "DLT-04Jul05" not acceptable because:
30 1997 Volume "DLT-13Feb04" not in catalog.
31 04-Jul 13:01 MainSD: Please mount Volume "DLT-04Jul05" on Storage Device
32 "HP DLT 80" (/dev/nst0) for Job Rufus.2005-07-04_01.05.02
33 - Remove old spool files on startup.
34 - Exclude SD spool/working directory.
35 - Finish TLS implementation.
36 - Refuse to prune last valid Full backup. Same goes for Catalog.
37 - --without-openssl breaks at least on Solaris.
39 - Make a callback when Rerun failed levels is called.
40 - Give Python program access to Scheduled jobs.
41 - Add setting Volume State via Python.
42 - Python script to save with Python, not save, save with Bacula.
43 - Python script to do backup.
45 - Change the Priority, Client, Storage, JobStatus (error)
46 at the start of a job.
47 - Why is SpoolDirectory = /home/bacula/spool; not reported
48 as an error when writing a DVD?
49 - Make bootstrap file handle multiple MediaTypes (SD)
50 - Remove all old Device resource code in Dir and code to pass it
51 back in SD -- better, rework it to pass back device statistics.
52 - Check locking of resources -- be sure to lock devices where previously
53 resources were locked.
54 - The last part is left in the spool dir.
57 - Port limiting -m in iptables to prevent DoS attacks
58 could cause broken pipes on Bacula.
59 - Document that Bootstrap files can be written with cataloging
61 - Pruning with Admin job.
62 - Add better documentation on how restores can be done
64 1) ADIC, DLT, FastStor 4000, 7*20GB
65 2) Sun, DDS, (Suns name unknown - Archive Python DDS drive), 1.2GB
66 3) Wangtek, QIC, 6525ES, 525MB (fixed block size 1k, block size etc.
67 driver dependent - aic7xxx works, ncr53c8xx with problems)
68 4) HP, DDS-2, C1553A, 6*4GB
70 to activate, check or disable the hardware compression feature on my
71 exb-8900 i use the exabyte "MammothTool" you can get it here:
72 http://www.exabyte.com/support/online/downloads/index.cfm
73 There is a solaris version of this tool. With option -C 0 or 1 you can
74 disable or activate compression. Start this tool without any options for
76 - Linux Sony LIB-D81, AIT-3 library works.
77 - Document PostgreSQL performance problems bug 131.
79 - Document that ChangerDevice is used for Alert command.
80 - Document new CDROM directory.
81 - Document Heartbeat Interval in the dealing with firewalls section.
82 - Document the multiple-drive-changer.txt script.
85 - In restore don't compare byte count on a raw device -- directory
86 entry does not contain bytes.
87 - To mark files as deleted, run essentially a Verify to disk, and
88 when a file is found missing (MarkId != JobId), then create
89 a new File record with FileIndex == -1. This could be done
90 by the FD at the same time as the backup.
94 MA = (last_MA * 3 + rate) / 4
95 rate = (bytes - last_bytes) / (runtime - last_runtime)
96 - Max Vols limit in Pool off by one?
97 - Implement Files/Bytes,... stats for restore job.
98 - Implement Total Bytes Written, ... for restore job.
99 - Despool attributes simultaneously with data in a separate
100 thread, rejoined at end of data spooling.
101 - 7. Implement new Console commands to allow offlining/reserving drives,
102 and possibly manipulating the autochanger (much asked for).
103 - Add start/end date editing in messages (%t %T, %e?) ...
104 - Add ClientDefs similar to JobDefs.
105 - Print more info when bextract -p accepts a bad block.
106 - Fix FD JobType to be set before RunBeforeJob in FD.
107 - Look at adding full Volume and Pool information to a Volume
108 label so that bscan can get *all* the info.
109 - If the user puts "Purge Oldest Volume = yes" or "Recycle Oldest Volume = yes"
110 and there is only one volume in the pool, refuse to do it -- otherwise
111 he fills the Volume, then immediately starts reusing it.
112 - Implement copies and stripes.
113 - Add history file to console.
114 - Each file on tape creates a JobMedia record. Peter has 4 million
115 files spread over 10000 tape files and four tapes. A restore takes
116 16 hours to build the restore list.
117 - Add and option to check if the file size changed during backup.
118 - Make sure SD deletes spool files on error exit.
119 - Delete old spool files when SD starts.
120 - When labeling tapes, if you enter 000026, Bacula uses
121 the tape index rather than the Volume name 000026.
122 - Add offline tape command to Bacula console.
124 Enter MediaId or Volume name: 32
125 Enter new Volume name: DLT-20Dec04
126 Automatically selected Pool: Default
127 Connecting to Storage daemon DLTDrive at 192.168.68.104:9103 ...
128 Sending relabel command from "DLT-28Jun03" to "DLT-20Dec04" ...
129 block.c:552 Write error at 0:0 on device /dev/nst0. ERR=Bad file descriptor.
130 Error writing final EOF to tape. This tape may not be readable.
131 dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
132 askdir.c:219 NULL Volume name. This shouldn't happen!!!
133 3912 Failed to label Volume: ERR=dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
134 Label command failed for Volume DLT-20Dec04.
135 Do not forget to mount the drive!!!
136 - Bug: if a job is manually scheduled to run later, it does not appear
137 in any status report and cannot be cancelled.
140 - Add Pool/Storage override regression test.
141 - Add delete JobId to regression.
142 - Add a regression test for dbcheck.
143 - New test to add bscan to four-concurrent-jobs regression,
144 i.e. after the four-concurrent jobs zap the
145 database as is done in the bscan-test, then use bscan to
146 restore the database, do a restore and compare with the
148 - Add restore of specific JobId to regression (item 3
149 on the restore prompt)
150 - Add IPv6 to regression
151 - Add database test to regression. Test each function like delete,
154 - AntiVir can slow down backups on Win32 systems.
155 - Win32 systems with FAT32 can be much slower than NTFS for
156 more than 1000 files per directory.
160 - A HOLD command to stop all jobs from starting.
161 - A PAUSE command to pause all running jobs ==> release the
163 - Media Type = LTO,LTO-2,LTO-3
164 Media Type Read = LTO,LTO2,LTO3
165 Media Type Write = LTO2, LTO3
167 === From Carsten Menke <bootsy52@gmx.net>
169 Following is a list of what I think in the situations where I'm faced with,
170 could be a usefull enhancement to bacula, which I'm certain other users will
171 benefit from as well.
173 1. NextJob/NextJobs Directive within a Job Resource in the form of
174 NextJobs = job1,job2.
177 I currently solved the problem with running multiple jobs each after each
178 by setting the Max Wait Time for a job to 8 hours, and give
179 the jobs different Priorities. However, there scenarios where
180 1 Job is directly depending on another job, so if the former job fails,
181 the job after it needn't to be run
182 while maybe other jobs should run despite of that
185 A Backup Job and a Verify job, if the backup job fails there is no need to run
186 the verify job, as the backup job already failed. However, one may like
187 to backup the Catalog to disk despite of that the main backup job failed.
190 I see that this is related to the Event Handlers which are on the ToDo
191 list, also it is maybe a good idea to check for the return value and
192 execute different actions based on the return value
195 3. offline capability to bconsole
198 Currently I use a script which I execute within the last Job via the
199 RunAfterJob Directive, to release and eject the tape.
200 So I have to call bconsole "release=Storage-Name" and afterwards
201 mt -f /dev/nst0 eject to get the tape out.
203 If I have multiple Storage Devices, than these may not be /dev/nst0 and
204 I have to modify the script or call it with parameters etc.
205 This would actually not be needed, as everything is already defined
206 in bacula-sd.conf and if I can invoke bconsole with the
207 storage name via $1 in the script than I'm done and information is
210 4. %s for Storage Name added to the chars being substituted in "RunAfterJob"
214 For the reason mentioned in 3. to have the ability to call a
215 script with /scripts/foobar %s and in the script use $1
216 to pass the Storage Name to bconsole
218 5. Setting Volume State within a Job Resource
221 Instead of using "Maximum Volume Jobs" in the Pool Resource,
222 I would have the possibilty to define
223 in a Job Resource that after this certain job is run, the Volume State
224 should be set to "Volume State = Used", this give more flexibility (IMHO).
226 6. Localization of Bacula Messages
229 Unfortunatley many,many people I work with don't speak english very well.
230 So if at least the Reporting messages would be localized then they
231 would understand that they have to change the tape,etc. etc.
233 I volunteer to do the german translations, and if I can convince my wife also
234 french and Morre (western african language).
236 7. OK, this is evil, probably bound to security risks and maybe not possible
237 due to the design of bacula.
239 Implementation of Backtics ( `command` ) for shell comand execution to
240 the "Label Format" Directive.
244 Currently I have defined BACULA_DAY_OF_WEEK="day1|day2..." resulting in
245 Label Format = "HolyBackup-${BACULA_DAY_OF_WEEK[${WeekDay}]}". If I could
246 use backticks than I could use "Label Format = HolyBackup-`date +%A` to have
247 the localized name for the day of the week appended to the
248 format string. Then I have the tape labeled automatically with weekday
249 name in the correct language.
251 - Yes, that is surely the case. I probably should turn those into Warning
252 errors. In addition, you just made me think that it might not be bad to
253 add an option to check the file size after backing up the file and
254 report if it changes. This would be done as an option because it would
257 Kern, good idea. If you do do that, mention in the output: file
258 shrunk, or file expanded, just to make it obvious to the user
259 (without having to the refer to file size), just how the file size
262 Would this option be for all file, or just one file? Or a fileset?
263 - Make output from status use html table tags for nicely
264 presenting in a browser.
265 - Can one write tapes faster with 8192 byte block sizes?
266 - Document security problems with the same password for everyone in
267 rpm and Win32 releases.
268 - Browse generations of files.
269 - I've seen an error when my catalog's File table fills up. I
270 then have to recreate the File table with a larger maximum row
271 size. Relevant information is at
272 http://dev.mysql.com/doc/mysql/en/Full_table.html ; I think the
273 "Installing and Configuring MySQL" chapter should talk a bit
274 about this potential problem, and recommend a solution.
275 - For Solaris must use POSIX awk.
276 - Want speed of writing to tape while despooling.
277 - Supported autochanger:
285 Wangtek 6525ES (SCSI-1 QIC drive, 525MB), under Linux 2.4.something,
286 bacula 1.36.0/1 works with blocksize 16k INSIDE bacula-sd.conf.
287 - Add regex from http://www.pcre.org to Bacula for Win32.
288 - Use only shell tools no make in CDROM package.
289 - Include within include does it work?
290 - Implement a Pool of type Cleaning?
291 - Implement VolReadTime and VolWriteTime in SD
292 - Modify Backing up Your Database to include a bootstrap file.
293 - Think about making certain database errors fatal.
294 - Look at correcting the time jump in the scheduler for daylight
295 savings time changes.
296 - Add a "real" timer to network connections.
297 - Promote to Full = Time period
298 - Check dates entered by user for correctness (month/day/... ranges)
299 - Compress restore Volume listing by date and first file.
300 - Look at patches/bacula_db.b2z postgresql that loops during restore.
302 - Perhaps add read/write programs and/or plugins to FileSets.
303 - How to handle backing up portables ...
304 - Add some sort of guaranteed Interval for upgrading jobs.
305 - Can we write the state file after every job terminates? On Win32
306 the system crashes and the state file is not updated.
309 Documentation to do: (any release a little bit at a time)
310 - Doc to do unmount before removing magazine.
311 - Alternative to static linking "ldd prog" save all binaries listed,
312 restore them and point LD_LIBRARY_PATH to them.
313 - Document add "</dev/null >/dev/null 2>&1" to the bacula-fd command line
314 - Document query file format.
315 - Add more documentation for bsr files.
316 - Document problems with Verify and pruning.
317 - Document how to use multiple databases.
318 - VXA drives have a "cleaning required"
319 indicator, but Exabyte recommends preventive cleaning after every 75
322 In this context, it should be noted that Exabyte has a command-line
323 vxatool utility available for free download. (The current version is
324 vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
325 test the drive, unload tapes, change drive settings, flash new firmware,
327 Of particular interest in this context is that vxatool <device> -i will
328 report, among other details, the time since last cleaning in tape motion
329 minutes. This information can be retrieved (and settings changed, for
330 that matter) through the generic-SCSI device even when Bacula has the
331 regular tape device locked. (Needless to say, I don't recommend
332 changing tape settings while a job is running.)
333 - Lookup HP cleaning recommendations.
334 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
335 - Document doing table repair
338 ===================================
339 - Add macro expansions in JobDefs.
340 Run Before Job = "SomeFile %{Level} %{Client}"
341 Write Bootstrap="/some/dir/%{JobName}_%{Client}.bsr"
342 - Use non-blocking network I/O but if no data is available, use
344 - Use gather write() for network I/O.
345 - Autorestart on crash.
346 - Add bandwidth limiting.
347 - Add acks every once and a while from the SD to keep
348 the line from timing out.
349 - When an error in input occurs and conio beeps, you can back
350 up through the prompt.
351 - Detect fixed tape block mode during positioning by looking at
352 block numbers in btape "test". Possibly adjust in Bacula.
353 - Fix list volumes to output volume retention in some other
354 units, perhaps via a directive.
355 - If opening a tape in read/write mode fails attempt to open
356 it in read-only mode, and mark the tape for read only.
357 - Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
358 with multiple priorities.
359 - If you use restore replace=never, the directory attributes for
360 non-existent directories will not be restored properly.
362 - see lzma401.zip in others directory for new compression
364 - Minimal autochanger handling in Bacula and in btape.
365 - Look into how tar does not save sockets and the possiblity of
366 not saving them in Bacula (Martin Simmons reported this).
367 - Fix restore jobs so that multiple jobs can run if they
368 are not using the same tape(s).
369 - Allow the user to select JobType for manual pruning/purging.
370 - bscan does not put first of two volumes back with all info in
372 - Implement the FreeBSD nodump flag in chflags.
373 - Figure out how to make named console messages go only to that
374 console and to the non-restricted console (new console class?).
375 - Make restricted console prompt for password if *ask* is set or
376 perhaps if password is undefined.
377 - Implement "from ISO-date/time every x hours/days/weeks/months" in
380 ==== from Marc Schoechlin
381 - the help-command should be more verbose
382 (it should explain the paramters of the different
384 -> its time-comsuming to consult the manual anytime
385 you need a special parameter
386 -> maybe its more easy to maintain this, if the
387 descriptions of that commands are outsourced to
389 - the cd-command should allow complete paths
390 i.e. cd /foo/bar/foo/bar
391 -> if a customer mails me the path to a certain file,
392 its faster to enter the specified directory
393 - if the password is not configured in bconsole.conf
394 you should be asked for it.
395 -> sometimes you like to do restore on a customer-machine
396 which shouldnt know the password for bacula.
397 -> adding the password to the file favours admins
398 to forget to remove the password after usage
400 the protection of that file is less important
401 - long-listed-output of commands should be scrollable
402 like the unix more/less-command does
403 -> if someone runs 200 and more machines, the lists could
404 be a little long and complex
405 - command-output should be shown column by column
406 to reduce scrolling and to increase clarity
408 - lsmark should list the selected files with full
410 - wildcards for selecting and file and directories would be nice
411 - any actions should be interuptable with STRG+C
412 - command-expansion would be pretty cool
414 - When the replace Never option is set, new directory permissions
415 are not restored. See bug 213. To fix this requires creating a
416 list of newly restored directories so that those directory
417 permissions *can* be restored.
418 - Compaction of Disk space by "migrating" Volumes that have pruned
419 Jobs (what criteria? size, #jobs, time).
420 - Add prune all command
421 - Document fact that purge can destroy a part of a restore by purging
422 one volume while others remain valid -- perhaps mark Jobs.
423 - Add multiple-media-types.txt
424 - look at mxt-changer.html
425 - Make ? do a help command (no return needed).
426 - Implement restore directory.
427 - Document streams and how to implement them.
428 - Try not to re-backup a file if a new hard link is added.
429 - Add feature to backup hard links only, but not the data.
430 - Fix stream handling to be simpler.
431 - Add Priority and Bootstrap to Run a Job.
432 - Eliminate Restore "Run Restore Job" prompt by allowing new "run command
434 - Remove View FileSet button from Run a Job dialog.
435 - Handle prompt for restore job at end of Restore command.
436 - Add display of total selected files to Restore window.
437 - Add tree pane to left of window.
438 - Add progress meter.
439 - Max wait time or max run time causes seg fault -- see runtime-bug.txt
440 - Document writing to a CD/DVD with Bacula.
441 - Add a "base" package to the window installer for pthreadsVCE.dll
442 which is needed by all packages.
443 - Add message to user to check for fixed block size when the forward
444 space test fails in btape.
445 - When unmarking a directory check if all files below are unmarked and
446 then remove the + flag -- in the restore tree.
447 - Possibly implement: Action = Unmount Device="TapeDrive1" in Admin jobs.
448 - Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
449 - Revisit the question of multiple Volumes (disk) on a single device.
450 - Add a block copy option to bcopy.
451 - Investigate adding Mac Resource Forks.
452 - Finish work on Gnome restore GUI.
453 - Fix "llist jobid=xx" where no fileset or client exists.
454 - For each job type (Admin, Restore, ...) require only the really necessary
455 fields.- Pass Director resource name as an option to the Console.
456 - Add a "batch" mode to the Console (no unsolicited queries, ...).
457 - Add a .list all files in the restore tree (probably also a list all files)
458 Do both a long and short form.
459 - Allow browsing the catalog to see all versions of a file (with
460 stat data on each file).
461 - Restore attributes of directory if replace=never set but directory
463 - Use SHA1 on authentication if possible.
464 - See comtest-xxx.zip for Windows code to talk to USB.
465 - Add John's appended files:
466 Appended = { /files/server/logs/http/*log }
467 and such files would be treated as follows.On a FULL backup, they would
468 be backed up like any other file.On an INCREMENTAL backup, where a
469 previous INCREMENTAL or FULL was already in thecatalogue and the length
470 of the file wasgreater than the length of the last backup, only thedata
471 added since the last backup will be dumped.On an INCREMENTAL backup, if
472 the length of the file is less than thelength of the file with the same
473 name last backed up, the completefile is dumped.On Windows systems, with
474 creation date of files, we can be evensmarter about this and not count
475 entirely upon the length.On a restore, the full and all incrementals
476 since it will beapplied in sequence to restore the file.
477 - Check new HAVE_WIN32 open bits.
478 - Check if the tape has moved before writing.
479 - Handling removable disks -- see below:
480 - Keep track of tape use time, and report when cleaning is necessary.
481 - Add FromClient and ToClient keywords on restore command (or
482 BackupClient RestoreClient).
483 - Implement a JobSet, which groups any number of jobs. If the
484 JobSet is started, all the jobs are started together.
485 Allow Pool, Level, and Schedule overrides.
486 - Enhance cancel to timeout BSOCK packets after a specific delay.
487 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
488 ua_status.!!! Thanks to Alan Brown for this tip.
489 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
490 correctly for multiple simultaneous jobs.
491 - Correct code so that FileSet MD5 is calculated for < and | filename
493 - Implement the Media record flag that indicates that the Volume does disk
495 - Implement VolAddr, which is used when Volume is addressed like a disk,
496 and form it from VolFile and VolBlock.
497 - Make multiple restore jobs for multiple media types specifying
498 the proper storage type.
499 - Fix fast block rejection (stored/read_record.c:118). It passes a null
500 pointer (rec) to try_repositioning().
501 - Look at extracting Win data from BackupRead.
502 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
503 which would take precidence over the Catalog "JobRetention".
504 - Implement Label Format in Add and Label console commands.
505 - Possibly up network buffers to 65K. Put on variable.
506 - Put email tape request delays on one or more variables. User wants
507 to cancel the job after a certain time interval. Maximum Mount Wait?
508 - Job, Client, Device, Pool, or Volume?
509 Is it possible to make this a directive which is *optional* in multiple
510 resources, like Level? If so, I think I'd make it an optional directive
511 in Job, Client, and Pool, with precedence such that Job overrides Client
512 which in turn overrides Pool.
514 - New Storage specifications:
515 - Want to write to multiple storage devices simultaneously
516 - Want to write to multiple storage devices sequentially (in one job)
517 - Want to read/write simultaneously
518 - Key is MediaType -- it must match
520 Passed to SD as a sort of BSR record called Storage Specification
524 MediaType -> Next MediaType
526 Device -> Next Device
528 Allow multiple Storage specifications
536 Allow Multiple Pool specifications (note, Pool currently
538 Allow Multiple MediaType specifications in Dir conf
539 Allow Multiple Device specifications in Dir conf
540 Perhaps keep this in a single SSR
541 Tie a Volume to a specific device by using a MediaType that
542 is contained in only one device.
543 In SD allow Device to have Multiple MediaTypes
545 - Ideas from Jerry Scharf:
546 First let's point out some big pluses that bacula has for this
548 more importantly it's active. Thank you so much for that
549 even more important, it's not flaky
550 it has an open access catalog, opening many possibilities
551 it's pushing toward heterogeneous systems capability
553 Macintosh file client
554 macs are an interesting niche, but I fear a server is a rathole
555 working bare iron recovery for windows
556 the option for inc/diff backups not reset on fileset revision
557 a) use both change and inode update time against base time
558 b) do the full catalog check (expensive but accurate)
559 sizing guide (how much system is needed to back up N systems/files)
560 consultants on using bacula in building a disaster recovery system
562 or how to get at fancy things that one could do with bacula
563 logwatch code for bacula logs (or similar)
564 linux distro inclusion of bacula (brings good and bad, but necessary)
565 win2k/XP server capability (icky but you asked)
566 support for Oracle database ??
568 - Look at adding SQL server and Exchange support for Windows.
569 - Make dev->file and dev->block_num signed integers so that -1 can
570 be an invalid value which happens with BSR.
571 - Create VolAddr for disk files in place of VolFile and VolBlock. This
572 is needed to properly specify ranges.
573 - Add progress of files/bytes to SD and FD.
574 - Print warning message if FileId > 4 billion
575 - do a "messages" before the first prompt in Console
576 - Client does not show busy during Estimate command.
577 - Implement Console mtx commands.
578 - Implement a Mount Command and an Unmount Command where
579 the users could specify a system command to be performed
580 to do the mount, after which Bacula could attempt to
581 read the device. This is for Removeable media such as a CDROM.
582 - Most likely, this mount command would be invoked explicitly
583 by the user using the current Console "mount" and "unmount"
584 commands -- the Storage Daemon would do the right thing
585 depending on the exact nature of the device.
586 - As with tape drives, when Bacula wanted a new removable
587 disk mounted, it would unmount the old one, and send a message
588 to the user, who would then use "mount" as described above
589 once he had actually inserted the disk.
590 - Implement dump/print label to UA
591 - Spool to disk only when the tape is full, then when a tape is hung move
593 - bextract is sending everything to the log file ****FIXME****
594 - Allow multiple Storage specifications (or multiple names on
595 a single Storage specification) in the Job record. Thus a job
596 can be backed up to a number of storage devices.
597 - Implement some way for the File daemon to contact the Director
598 to start a job or pass its DHCP obtained IP number.
599 - Implement a query tape prompt/replace feature for a console
600 - Copy console @ code to gnome2-console
601 - Make AES the only encryption algorithm see
602 http://csrc.nist.gov/CryptoToolkit/aes/). It's
603 an officially adopted standard, has survived peer
604 review, and provides keys up to 256 bits.
605 - Take a careful look at SetACL http://setacl.sourceforge.net
606 - Make tree walk routines like cd, ls, ... more user friendly
607 by handling spaces better.
608 - Make sure that Bacula rechecks the tape after the 20 min wait.
609 - Set IO_NOWAIT on Bacula TCP/IP packets.
610 - Try doing a raw partition backup and restore by mounting a
613 Yes, it would allow to highly automatic the request for new tapes. If a
614 tape is empty, bacula reads the barcodes (native or simulated), and if
615 an unused tape is found, it runs the label command with all the
616 necessary parameters.
618 By the way can bacula automatically "move" an empty/purged volume say
619 in the "short" pool to the "long" pool if this pool runs out of volume
621 - What to do about "list files job=xxx".
622 - Get and test MySQL 4.0
623 - Look at how fuser works and /proc/PID/fd that is how Nic found the
624 file descriptor leak in Bacula.
625 - Implement WrapCounters in Counters.
626 - Add heartbeat from FD to SD if hb interval expires.
627 - Can we dynamically change FileSets?
628 - If pool specified to label command and Label Format is specified,
629 automatically generate the Volume name.
630 - Why can't SQL do the filename sort for restore?
631 - Add ExhautiveRestoreSearch
632 - Look at the possibility of loading only the necessary
633 data into the restore tree (i.e. do it one directory at a
634 time as the user walks through the tree).
635 - Possibly use the hash code if the user selects all for a restore command.
636 - Fix "restore all" to bypass building the tree.
637 - Prohibit backing up archive device (findlib/find_one.c:128)
638 - Implement Release Device in the Job resource to unmount a drive.
639 - Implement Acquire Device in the Job resource to mount a drive,
640 be sure this works with admin jobs so that the user can get
641 prompted to insert the correct tape. Possibly some way to say to
642 run the job but don't save the files.
643 - Make things like list where a file is saved case independent for
646 - Use autochanger to handle multiple devices.
647 - On Windows with very long path names, it may be impossible to create
648 a file (and thus restore it) because the total length is too long.
649 We must cd into the directory then create the file without the
651 - Implement a Recycle command
652 - Test a second language e.g. french.
653 - Start working on Base jobs.
654 - Implement UnsavedFiles DB record.
655 - From Phil Stracchino:
656 It would probably be a per-client option, and would be called
657 something like, say, "Automatically purge obsoleted jobs". What it
658 would do is, when you successfully complete a Differential backup of a
659 client, it would automatically purge all Incremental backups for that
660 client that are rendered redundant by that Differential. Likewise,
661 when a Full backup on a client completed, it would automatically purge
662 all Differential and Incremental jobs obsoleted by that Full backup.
663 This would let people minimize the number of tapes they're keeping on
664 hand without having to master the art of retention times.
665 - When doing a Backup send all attributes back to the Director, who
666 would then figure out what files have been deleted.
667 - Currently in mount.c:236 the SD simply creates a Volume. It should have
668 explicit permission to do so. It should also mark the tape in error
669 if there is an error.
670 - Cancel waiting for Client connect in SD if FD goes away.
672 - Implement timeout in response() when it should come quickly.
673 - Implement a Slot priority (loaded/not loaded).
674 - Implement "vacation" Incremental only saves.
675 - Implement create "FileSet"?
676 - Add prefixlinks to where or not where absolute links to FD.
677 - Issue message to mount a new tape before the rewind.
678 - Simplified client job initiation for portables.
679 - If SD cannot open a drive, make it periodically retry.
680 - Add more of the config info to the tape label.
682 - If tape is marked read-only, then try opening it read-only rather than
683 failing, and remember that it cannot be written.
684 - Refine SD waiting output:
685 Device is being positioned
686 > Device is being positioned for append
687 > Device is being positioned to file x
689 - Figure out some way to estimate output size and to avoid splitting
690 a backup across two Volumes -- this could be useful for writing CDROMs
691 where you really prefer not to have it split -- not serious.
692 - Have SD compute MD5 or SHA1 and compare to what FD computes.
693 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
694 actual data on the Volume and compare it.
695 - Implement Bacula plugins -- design API
696 - Make bcopy read through bad tape records.
697 - Program files (i.e. execute a program to read/write files).
698 Pass read date of last backup, size of file last time.
699 - Add Signature type to File DB record.
700 - CD into subdirectory when open()ing files for backup to
701 speed up things. Test with testfind().
702 - Priority job to go to top of list.
703 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
704 - Implement some way for the Console to dynamically create a job.
705 - Solaris -I on tar for include list
706 - Need a verbose mode in restore, perhaps to bsr.
707 - bscan without -v is too quiet -- perhaps show jobs.
708 - Add code to reject whole blocks if not wanted on restore.
709 - Check if we can increase Bacula FD priorty in Win2000
710 - Make sure the MaxVolFiles is fully implemented in SD
711 - Check if both CatalogFiles and UseCatalog are set to SD.
712 - Possibly add email to Watchdog if drive is unmounted too
713 long and a job is waiting on the drive.
714 - After unmount, if restore job started, ask to mount.
715 - Add UA rc and history files.
716 - put termcap (used by console) in ./configure and
717 allow -with-termcap-dir.
718 - Fix Autoprune for Volumes to respect need for full save.
719 - Compare tape to Client files (attributes, or attributes and data)
720 - Make all database Ids 64 bit.
721 - Allow console commands to detach or run in background.
722 - Fix status delay on storage daemon during rewind.
723 - Add SD message variables to control operator wait time
724 - Maximum Operator Wait
725 - Minimum Message Interval
726 - Maximum Message Interval
727 - Send Operator message when cannot read tape label.
728 - Verify level=Volume (scan only), level=Data (compare of data to file).
729 Verify level=Catalog, level=InitCatalog
731 - Add keyword search to show command in Console.
732 - Events : tape has more than xxx bytes.
733 - Complete code in Bacula Resources -- this will permit
734 reading a new config file at any time.
735 - Handle ctl-c in Console
736 - Implement script driven addition of File daemon to config files.
737 - Think about how to make Bacula work better with File (non-tape) archives.
738 - Write Unix emulator for Windows.
739 - Put memory utilization in Status output of each daemon
740 if full status requested or if some level of debug on.
741 - Make database type selectable by .conf files i.e. at runtime
742 - Set flag for uname -a. Add to Volume label.
743 - Restore files modified after date
744 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
745 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
746 - Timout a job or terminate if link goes down, or reopen link and query.
747 - Concept of precious tapes (cannot be reused).
748 - Make bcopy copy with a single tape drive.
749 - Permit changing ownership during restore.
752 > My suggestion: Add a feature on the systray menu-icon menu to request
753 > an immediate backup now. This would be useful for laptop users who may
754 > not be on the network when the regular scheduled backup is run.
756 > My wife's suggestion: Add a setting to the win32 client to allow it to
757 > shut down the machine after backup is complete (after, of course,
758 > displaying a "System will shut down in one minute, click here to cancel"
759 > warning dialog). This would be useful for sites that want user
760 > woorkstations to be shut down overnight to save power.
763 - Autolabel should be specified by DIR instead of SD.
766 - AutoScan (check checksum of tape)
767 - Format command = "format /dev/nst0"
771 - Seek resolution (usually corresponds to buffer size)
772 - EODErrorCode=ENOSPC or code
773 - Partial Read error code
774 - Partial write error code
775 - Nonformatted read error
776 - Nonformatted write error
777 - WriteProtected error
781 - IgnoreCloseErrors=yes
791 - FD sends unsaved file list to Director at end of job (see
793 - File daemon should build list of files skipped, and then
794 at end of save retry and report any errors.
795 - Write a Storage daemon that uses pipes and
796 standard Unix programs to write to the tape.
798 - Need something that monitors the JCR queue and
799 times out jobs by asking the deamons where they are.
800 - Enhance Jmsg code to permit buffering and saving to disk.
801 - device driver = "xxxx" for drives.
803 - Ensure that /dev/null works
804 - Need report class for messages. Perhaps
805 report resource where report=group of messages
806 - enhance scan_attrib and rename scan_jobtype, and
807 fill in code for "since" option
808 - Director needs a time after which the report status is sent
809 anyway -- or better yet, a retry time for the job.
810 - Don't reschedule a job if previous incarnation is still running.
811 - Some way to automatically backup everything is needed????
812 - Need a structure for pending actions:
814 - termination status (part of buffered msgs?)
816 Read, Write, Clean, Delete
817 - Login to Bacula; Bacula users with different permissions:
818 owner, group, user, quotas
819 - Store info on each file system type (probably in the job header on tape.
820 This could be the output of df; or perhaps some sort of /etc/mtab record.
822 ========= ideas ===============
823 From: "Jerry K. Schieffer" <jerry@skylinetechnology.com>
824 To: <kern@sibbald.com>
825 Subject: RE: [Bacula-users] future large programming jobs
826 Date: Thu, 26 Feb 2004 11:34:54 -0600
828 I noticed the subject thread and thought I would offer the following
829 merely as sources of ideas, i.e. something to think about, not even as
830 strong as a request. In my former life (before retiring) I often
831 dealt with backups and storage management issues/products as a
832 developer and as a consultant. I am currently migrating my personal
833 network from amanda to bacula specifically because of the ability to
834 cross media boundaries during storing backups.
835 Are you familiar with the commercial product called ADSM (I think IBM
836 now sells it under the Tivoli label)? It has a couple of interesting
837 ideas that may apply to the following topics.
839 1. Migration: Consider that when you need to restore a system, there
840 may be pressure to hurry. If all the information for a single client
841 can eventually end up on the same media (and in chronological order),
842 the restore is facillitated by not having to search past information
843 from other clients. ADSM has the concept of "client affinity" that
844 may be associated with it's storage pools. It seems to me that this
845 concept (as an optional feature) might fit in your architecture for
848 ADSM also has the concept of defining one or more storage pools as
849 "copy pools" (almost mirrors, but only in the sense of contents).
850 These pools provide the ability to have duplicte data stored both
851 onsite and offsite. The copy process can be scheduled to be handled
852 by their storage manager during periods when there is no backup
853 activity. Again, the migration process might be a place to consider
854 implementing something like this.
857 > It strikes me that it would be very nice to be able to do things
859 > have the Job(s) backing up the machines run, and once they have all
860 > completed, start a migration job to copy the data from disks Volumes
862 > a tape library and then to offsite storage. Maybe this can already
864 > done with some careful scheduling and Job prioritzation; the events
865 > mechanism described below would probably make it very easy.
867 This is the goal. In the first step (before events), you simply
869 the Migration to tape later.
871 2. Base jobs: In ADSM, each copy of each stored file is tracked in
872 the database. Once a file (unique by path and metadata such as dates,
873 size, ownership, etc.) is in a copy pool, no more copies are made. In
874 other words, when you start ADSM, it begins like your concept of a
875 base job. After that it is in the "incremental" mode. You can
876 configure the number of "generations" of files to be retained, plus a
877 retention date after which even old generations are purged. The
878 database tracks the contents of media and projects the percentage of
879 each volume that is valid. When the valid content of a volume drops
880 below a configured percentage, the valid data are migrated to another
881 volume and the old volume is marked as empty. Note, this requires
882 ADSM to have an idea of the contents of a client, i.e. marking the
883 database when an existing file was deleted, but this would solve your
884 issue of restoring a client without restoring deleted files.
886 This is pretty far from what bacula now does, but if you are going to
887 rip things up for Base jobs,.....
888 Also, the benefits of this are huge for very large shops, especially
889 with media robots, but are a pain for shops with manual media
893 > Base jobs sound pretty useful, but I'm not dying for them.
895 Nobody is dying for them, but when you see what it does, you will die
898 3. Restoring deleted files: Since I think my comments in (2) above
899 have low probability of implementation, I'll also suggest that you
900 could approach the issue of deleted files by a mechanism of having the
901 fd report to the dir, a list of all files on the client for every
902 backup job. The dir could note in the database entry for each file
903 the date that the file was seen. Then if a restore as of date X takes
904 place, only files that exist from before X until after X would be
905 restored. Probably the major cost here is the extra date container in
906 each row of the files table.
908 Thanks for "listening". I hope some of this helps. If you want to
909 contact me, please send me an email - I read some but not all of the
910 mailing list traffic and might miss a reply there.
912 Please accept my compliments for bacula. It is doing a great job for
913 me!! I sympathize with you in the need to wrestle with excelence in
914 execution vs. excelence in feature inclusion.
919 ==============================
922 - Design at hierarchial storage for Bacula. Migration and Clone.
923 - Implement FSM (File System Modules).
924 - Audit M_ error codes to ensure they are correct and consistent.
925 - Add variable break characters to lex analyzer.
926 Either a bit mask or a string of chars so that
927 the caller can change the break characters.
928 - Make a single T_BREAK to replace T_COMMA, etc.
929 - Ensure that File daemon and Storage daemon can
930 continue a save if the Director goes down (this
931 is NOT currently the case). Must detect socket error,
932 buffer messages for later.
933 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
934 - Add ability to backup to two Storage devices (two SD sessions) at
935 the same time -- e.g. onsite, offsite.
936 - Add the ability to consolidate old backup sets (basically do a restore
937 to tape and appropriately update the catalog). Compress Volume sets.
938 Might need to spool via file is only one drive is available.
939 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
940 someway to do so with every volume that has less than x% valid
944 Migration: Move a backup from one Volume to another
945 Clone: Copy a backup -- two Volumes
947 Bacula Migration is based on Jobs (apparently Networker is file by file).
949 Migration triggered by:
953 Highwater mark (keep total size)
958 ======================================================
960 It is somewhat like a Full save becomes an incremental since
961 the Base job (or jobs) plus other non-base files.
963 - A Base backup is same as Full backup, just different type.
964 - New BaseFiles table that contains:
966 BaseJobId - Base JobId referenced for this FileId (needed ???)
967 JobId - JobId currently running
968 FileId - File not backed up, exists in Base Job
969 FileIndex - FileIndex from Base Job.
970 i.e. for each base file that exists but is not saved because
971 it has not changed, the File daemon sends the JobId, BaseId,
972 FileId, FileIndex back to the Director who creates the DB entry.
973 - To initiate a Base save, the Director sends the FD
974 the FileId, and full filename for each file in the Base.
975 - When the FD finds a Base file, he requests the Director to
976 send him the full File entry (stat packet plus MD5), or
977 conversely, the FD sends it to the Director and the Director
978 says yes or no. This can be quite rapid if the FileId is kept
979 by the FD for each Base Filename.
980 - It is probably better to have the comparison done by the FD
981 despite the fact that the File entry must be sent across the
983 - An alternative would be to send the FD the whole File entry
984 from the start. The disadvantage is that it requires a lot of
985 space. The advantage is that it requires less communications
987 - The Job record must be updated to indicate that one or more
989 - At end of Job, FD returns:
990 1. Count of base files/bytes not written to tape (i.e. matches)
991 2. Count of base file that were saved i.e. had changed.
992 - No tape record would be written for a Base file that matches, in the
993 same way that no tape record is written for Incremental jobs where
994 the file is not saved because it is unchanged.
995 - On a restore, all the Base file records must explicitly be
996 found from the BaseFile tape. I.e. for each Full save that is marked
997 to have one or more Base Jobs, search the BaseFile for all occurrences
999 - An optimization might be to make the BaseFile have:
1005 This would avoid the need to explicitly fetch each File record for
1006 the Base job. The Base Job record will be fetched to get the
1007 VolSessionId and VolSessionTime.
1008 =========================================================
1011 ==========================================================
1013 For each Incremental job that is run, there may be files that
1014 were found but not saved because they were locked (this applies
1015 only to Windows). Such a system could send back to the Director
1016 a list of Unsaved files.
1018 - New UnSavedFiles table that contains:
1022 - Then in the next Incremental job, the list of Unsaved Files will be
1023 feed to the FD, who will ensure that they are explicitly chosen even
1024 if standard date/time check would not have selected them.
1025 =============================================================
1029 Multiple drive autochanger data: see Alan Brown
1030 mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
1031 Unloading Data Transfer Element into Storage Element 1...source Element
1032 Address 480 is Empty
1034 (drive 0 was empty and so was slot 1)
1035 > mtx -f xxx load 15 0
1036 no response, just returns to the command prompt when complete.
1037 > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
1038 Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
1039 Data Transfer Element 1:Empty
1040 Storage Element 1:Empty
1041 Storage Element 2:Full :VolumeTag=HX002
1042 Storage Element 3:Full :VolumeTag=HX003
1043 Storage Element 4:Full :VolumeTag=HX004
1044 Storage Element 5:Full :VolumeTag=HX005
1045 Storage Element 6:Full :VolumeTag=HX006
1046 Storage Element 7:Full :VolumeTag=HX007
1047 Storage Element 8:Full :VolumeTag=HX008
1048 Storage Element 9:Full :VolumeTag=HX009
1049 Storage Element 10:Full :VolumeTag=HX010
1050 Storage Element 11:Empty
1051 Storage Element 12:Empty
1052 Storage Element 13:Empty
1053 Storage Element 14:Empty
1054 Storage Element 15:Empty
1055 Storage Element 16:Empty....
1056 Storage Element 28:Empty
1057 Storage Element 29:Full :VolumeTag=CLNU01L1
1058 Storage Element 30:Empty....
1059 Storage Element 57:Empty
1060 Storage Element 58:Full :VolumeTag=NEX261L2
1061 Storage Element 59 IMPORT/EXPORT:Empty
1062 Storage Element 60 IMPORT/EXPORT:Empty
1064 Unloading Data Transfer Element into Storage Element 15...done
1066 (just to verify it remembers where it came from, however it can be
1067 overrriden with mtx unload {slotnumber} to go to any storage slot.)
1069 There needs to be a table of drive # to devices somewhere - If there are
1070 multiple changers or drives there may not be a 1:1 correspondance between
1071 changer drive number and system device name - and depending on the way the
1072 drives are hooked up to scsi busses, they may not be linearly numbered
1073 from an offset point either.something like
1075 Autochanger drives = 2
1076 Autochanger drive 0 = /dev/nst1
1077 Autochanger drive 1 = /dev/nst2
1078 IMHO, it would be _safest_ to use explicit mtx unload commands at all
1079 times, not just for multidrive changers. For a 1 drive changer, that's
1085 MTX's manpage (1.2.15):
1086 unload [<slotnum>] [ <drivenum> ]
1087 Unloads media from drive <drivenum> into slot
1088 <slotnum>. If <drivenum> is omitted, defaults to
1089 drive 0 (as do all commands). If <slotnum> is
1090 omitted, defaults to the slot that the drive was
1091 loaded from. Note that there's currently no way
1092 to say 'unload drive 1's media to the slot it
1093 came from', other than to explicitly use that
1094 slot number as the destination.AB
1100 undef# camcontrol devlist
1101 <WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
1102 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
1103 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
1105 tapeinfo -f /dev/sg0 with a bad tape in drive 1:
1106 [kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
1107 Product Type: Tape Drive
1109 Product ID: 'C5713A '
1111 Attached Changer: No
1112 TapeAlert[3]: Hard Error: Uncorrectable read/write error.
1113 TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
1120 Medium Type: Not Loaded
1123 DataCompEnabled: yes
1124 DataCompCapable: yes
1125 DataDeCompEnabled: yes
1132 Handling removable disks
1134 From: Karl Cunningham <karlc@keckec.com>
1136 My backups are only to hard disk these days, in removable bays. This is my
1137 idea of how a backup to hard disk would work more smoothly. Some of these
1138 things Bacula does already, but I mention them for completeness. If others
1139 have better ways to do this, I'd like to hear about it.
1141 1. Accommodate several disks, rotated similar to how tapes are. Identified
1142 by partition volume ID or perhaps by the name of a subdirectory.
1143 2. Abort & notify the admin if the wrong disk is in the bay.
1144 3. Write backups to different subdirectories for each machine to be backed
1146 4. Volumes (files) get created as needed in the proper subdirectory, one
1148 5. When a disk is recycled, remove or zero all old backup files. This is
1149 important as the disk being recycled may be close to full. This may be
1150 better done manually since the backup files for many machines may be
1151 scattered in many subdirectories.
1156 - Save mount point for directories not traversed with onefs=yes.
1157 - Add seconds to start and end times in the Job report output.
1158 - if 2 concurrent backups are attempted on the same tape
1159 drive (autoloader) into different tape pools, one of them will exit
1160 fatally instead of halting until the drive is idle
1161 - Update StartTime if job held in Job Queue.
1162 - Look at www.nu2.nu/pebuilder as a helper for full windows
1163 bare metal restore. (done by Scott)
1164 - Fix orphanned buffers:
1165 Orphaned buffer: 24 bytes allocated at line 808 of rufus-dir job.c
1166 Orphaned buffer: 40 bytes allocated at line 45 of rufus-dir alist.c
1167 - Implement Preben's suggestion to add
1168 File System Types = ext2, ext3
1169 to FileSets, thus simplifying backup of *all* local partitions.
1170 - Try to open a device on each Job if it was not opened
1171 when the SD started.
1172 - Add dump of VolSessionId/Time and FileIndex with bls.
1173 - If Bacula does not find the right tape in the Autochanger,
1174 then mark the tape in error and move on rather than asking
1175 for operator intervention.
1176 - Cancel command should include JobId in list of Jobs.
1177 - Add performance testing hooks
1178 - Bootstrap from JobMedia records.
1179 - Implement WildFile and WildDir to solve problem of
1180 saving only *.doc files.
1182 Please use the "label" command to create a new Volume for:
1183 Storage: DDS-4-changer
1187 The defined Storage resources are:
1188 - Copy Changer Device and Changer Command from Autochanger
1189 to Device resource in SD if none given in Device resource.
1190 - 1. Automatic use of more than one drive in an autochanger (done)
1191 - 2. Automatic selection of the correct drive for each Job (i.e.
1192 selects a drive with an appropriate Volume for the Job) (done)
1193 - 6. Allow multiple simultaneous Jobs referencing the same pool write
1194 to several tapes (some new directive(s) are are probably needed for
1197 - Key on Storage rather than Pool (done)
1198 - Allow multiple drives to use same Pool (change jobq.c DIR) (done).
1199 - Synchronize multiple drives so that not more
1200 than one loads a tape and any time (done)
1201 - 4. Use Changer Device and Changer Command specified in the
1202 Autochanger resource, if none is found in the Device resource.
1203 You can continue to specify them in the Device resource if you want
1204 or need them to be different for each device.
1205 - 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
1206 that can allow a Device be part of an Autochanger, and hence the changer
1207 script protected, but if set to no, will prevent the Device from being
1208 automatically selected from the changer. This allows the device to
1209 be directly accessed through its Device name, but not through the
1211 #6 Select one from among Multiple Storage Devices for Job
1212 #5 Events that call a Python program
1213 (Implemented in Dir/SD)
1214 - Make sure the Device name is in the Query packet returned.
1215 - Don't start a second file job if one is already running.
1216 - Implement EOF/EOV labels for ANSI labels
1217 - Implement IBM labels.
1218 - When Python creates a new label, the tape is immediately
1219 recycled and no label created. This happens when using
1220 autolabeling -- even when Python doesn't generate the name.
1221 - Scratch Pool where the volumes can be re-assigned to any Pool.
1222 - 28-Mar 23:19 rufus-sd: acquire.c:379 Device "DDS-4" (/dev/nst0)
1223 is busy reading. Job 6 canceled.
1224 - Remove separate thread for opening devices in SD. On the other
1225 hand, don't block waiting for open() for devices.
1226 - Fix code to either handle updating NumVol or to calculate it in
1228 - Ensure that you cannot exclude a directory or a file explicitly
1230 #4 Embedded Python Scripting
1231 (Implemented in Dir/SD/FD)
1232 - Add Python writable variable for changing the Priority,
1233 Client, Storage, JobStatus (error), ...
1236 - Add disk seeking on restore; turn off seek on tapes.
1238 - Look at dird_conf.c:1000: warning: `int size'
1239 might be used uninitialized in this function
1240 - Indicate when a Job is purged/pruned during restore.
1241 - Implement some way to turn off automatic pruning in Jobs.
1242 - Implement a way an Admin Job can prune, possibly multiple
1243 clients -- Python script?
1244 - Look at Preben's acl.c error handling code.
1245 - SD crashes after a tape restore then doing a backup.
1246 - If drive is opened read/write, close it and re-open
1247 read-only if doing a restore, and vice-versa.
1249 data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
1250 > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
1251 > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
1252 > Prozess verwendet wird.
1253 Restore restores all files, but then fails at the end trying
1254 to set the attributes of e:
1255 from failed jobs.- Resolve the problem between Device name and Archive name,
1256 and fix SD messages.
1257 - Tell the "restore" user when browsing is no longer possible.
1258 - Add a restore directory-x
1259 - Write non-optimized bsrs from the JobMedia and Media records,
1260 even after Files are pruned.
1261 - Delete Stripe and Copy from VolParams to save space.
1262 - Fix option 2 of restore -- list where file is backed up -- require Client,
1263 then list last 20 backups.
1264 - Finish implementation of passing all Storage and Device needs to
1266 - Move test for max wait time exceeded in job.c up -- Peter's idea.
1267 ## Consider moving docs to their own project.
1268 ## Move rescue to its own project.
1269 - Add client version to the Client name line that prints in
1271 - Fix the Rescue CDROM.
1272 - By the way: on page http://www.bacula.org/?page=tapedrives , at the
1273 bottom, the link to "Tape Testing Chapter" is broken. It goes to
1274 /html-manual/... while the others point to /rel-manual/...
1275 - Device resource needs the "name" of the SD.
1276 - Specify a single directory to restore.
1277 - Implement MediaType keyword in bsr?
1278 - Add a date and time stamp at the beginning of every line in the
1279 Job report (Volker Sauer).
1280 - Add level to estimate command.
1281 - Add "limit=n" for "list jobs"
1282 - Make bootstrap filename unique.
1283 - Make Dmsg look at global before calling subroutine.
1285 it seems to be complaining about 12:00pm which should be a valid 12
1286 hour time. I changed the time to 11:59am and everything works fine.
1287 Also 12:00am works fine. 0:00pm also works (which I don't think
1288 should). None of the values 12:00pm - 12:59pm work for that matter.
1289 - Require restore via the restore command or make a restore Job
1290 get the bootstrap file.
1291 - Implement Maximum Job Spool Size
1292 - Fix 3993 error in SD. It forgets to look at autochanger
1293 resource for device command, ...
1294 - 3. Prevent two drives requesting the same Volume in any given
1295 autochanger, by checking if a Volume is mounted on another drive
1297 - Upgrade to MySQL 4.1.12 See:
1298 http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
1299 - Add # Job Level date to bsr file
1300 - Implement "PreferMountedVolumes = yes|no" in Job resource.
1301 ## Integrate web-bacula into a new Bacula project with
1303 - Cleaning tapes should have Status "Cleaning" rather than append.
1304 - Make sure that Python has access to Client address/port so that
1305 it can check if Clients are alive.
1306 - Review all items in "restore".
1307 - Fix PostgreSQL GROUP BY problems in restore.
1308 - Fix PostgreSQL sql problems in bugs.