6 - !!! Cannot restore two jobs a the same time that were
7 written simultaneously unless they were totally spooled.
8 - Document cleaning up the spool files:
9 db, pid, state, bsr, mail, conmsg, spool
10 - Document the multiple-drive-changer.txt script.
11 - Pruning with Admin job.
12 - Does WildFile match against full name? Doc.
13 - %d and %v only valid on Director, not for ClientRunBefore/After.
14 - During tests with the 260 char fix code, I found one problem:
15 if the system "sees" a long path once, it seems to forget it's
16 working drive (e.g. c:\), which will lead to a problem during
17 the next job (create bootstrap file will fail). Here is the
18 workaround: specify absolute working and pid directory in
19 bacula-fd.conf (e.g. c:\bacula\working instead of
21 - Document techniques for restoring large numbers of files.
22 - Document setting my.cnf to big file usage.
23 - Add example of proper index output to doc. show index from File;
24 - Correct the Include syntax in the m4.xxx files in examples/conf
25 - Document JobStatus and Termination codes.
26 - Fix the error with the "DVI file can't be opened" while
27 building the French PDF.
28 - Document more DVD stuff
36 - Document all the little details of setting up certificates for
37 the Bacula data encryption code.
38 - Document more precisely how to use master keys -- especially
39 for disaster recovery.
42 - Migration from other vendors
46 - Backup conf/exe (all daemons)
47 - Backup up system state
48 - Detect state change of system (verify)
49 - Synthetic Full, Diff, Inc (Virtual, Reconstructed)
51 - Modules for Databases, Exchange, ...
52 - Novell NSS backup http://www.novell.com/coolsolutions/tools/18952.html
53 - Compliance norms that compare restored code hash code.
54 - When glibc crash, get address with
56 - How to sync remote offices.
58 http://www.microsoft.com/technet/itshowcase/content/exchbkup.mspx
61 - Use E'xxx' to escape PostgreSQL strings.
62 - No where in restore causes kaboom.
63 - Performance: multiple spool files for a single job.
64 - Performance: despool attributes when despooling data (problem
65 multiplexing Dir connection).
66 - Make restore use the in-use volume reservation algorithm.
67 - Look at mincore: http://insights.oetiker.ch/linux/fadvise.html
68 - Unicode input http://en.wikipedia.org/wiki/Byte_Order_Mark
69 - How does restore JobId=nnn work? (Dirk)
70 - What does: restore select fileset="TestSet" client="workplay-fd" pool="Default"
71 > storage="File2" before="2007-02-05 23:05:04" do? (Dirk)
73 - Implement update jobid=
74 - Mention Eric and Marc's work + Marc's doc.
76 - When Pool specifies Storage command override does not work.
77 - Implement wait_for_sysop() message display in wait_for_device(), which
78 now prints warnings too often.
80 - Ensure that each device in an Autochanger has a different
82 - Add Catalog = to Pool resource so that pools will exist
83 in only one catalog -- currently Pools are "global".
84 - Look at sg_logs -a /dev/sg0 for getting soft errors.
85 - btape "test" command with Offline on Unmount = yes
87 This test is essential to Bacula.
89 I'm going to write one record in file 0,
90 two records in file 1,
91 and three records in file 2
93 02-Feb 11:00 btape: ABORTING due to ERROR in dev.c:715
94 dev.c:714 Bad call to rewind. Device "LTO" (/dev/nst0) not open
95 02-Feb 11:00 btape: Fatal Error because: Bacula interrupted by signal 11: Segmentation violation
96 Kaboom! btape, btape got signal 11. Attempting traceback.
98 - Encryption -- email from Landon
99 > The backup encryption algorithm is currently not configurable, and is
100 > set to AES_128_CBC in src/filed/backup.c. The encryption code
101 > supports a number of different ciphers (as well as adding arbitrary
102 > new ones) -- only a small bit of code would be required to map a
103 > configuration string value to a CRYPTO_CIPHER_* value, if anyone is
104 > interested in implementing this functionality.
106 - Ensure that moving a purged Volume in ua_purge.c to the RecyclePool
107 does the right thing.
108 - Why doesn't @"xxx abc" work in a conf file?
109 - Figure out some way to "automatically" backup conf changes.
110 - Add the OS version back to the Win32 client info.
111 - Restarted jobs have a NULL in the from field.
112 - Modify SD status command to indicate when the SD is writing
113 to a DVD (the device is not open -- see bug #732).
114 - Look at the possibility of adding "SET NAMES UTF8" for MySQL,
115 and possibly changing the blobs into varchar.
116 - Ensure that the SD re-reads the Media record if the JobFiles
117 does not match -- it may have been updated by another job.
118 - Look at moving the Storage directive from the Job to the
119 Pool in the default conf files.
121 - Test Volume compatibility between machine architectures
122 - Encryption documentation
123 - Wrong jobbytes with query 12 (todo)
124 - bacula-1.38.2-ssl.patch
125 - Bare-metal recovery Windows (todo)
129 - Average tape size from Eric
130 SELECT COALESCE(media_avg_size.volavg,0) * count(Media.MediaId) AS volmax, GROUP BY Media.MediaType, Media.PoolId, media_avg_size.volavg
131 count(Media.MediaId) AS volnum,
132 sum(Media.VolBytes) AS voltotal,
133 Media.PoolId AS PoolId,
134 Media.MediaType AS MediaType
136 LEFT JOIN (SELECT avg(Media.VolBytes) AS volavg,
137 Media.MediaType AS MediaType
139 WHERE Media.VolStatus = 'Full'
140 GROUP BY Media.MediaType
141 ) AS media_avg_size ON (Media.MediaType = media_avg_size.MediaType)
142 GROUP BY Media.MediaType, Media.PoolId, media_avg_size.volavg
146 - Add doc for bweb -- especially Installation
148 http://www.orangecrate.com/modules.php?name=News&file=article&sid=501
150 - FD-SD quick disconnect
151 - Despool attributes in separate thread
154 - Check why restore repeatedly sends Rechdrs between
155 each data chunk -- according to James Harper 9Jan07.
156 - Building the in memory restore tree is slow.
159 - Full at least once a month, ...
160 - Cancel Inc if Diff/Full running
161 - More intelligent re-run
162 - New/deleted file backup
164 - Incremental backup -- rsync, Stow
168 - Look at mondo/mindi
169 - Don't restore Solaris Door files:
170 #define S_IFDOOR in st_mode.
171 see: http://docs.sun.com/app/docs/doc/816-5173/6mbb8ae23?a=view#indexterm-360
172 - Make Bacula by default not backup tmpfs, procfs, sysfs, ...
173 - Fix hardlinked immutable files when linking a second file, the
174 immutable flag must be removed prior to trying to link it.
175 - Implement Python event for backing up/restoring a file.
176 - Change dbcheck to tell users to use native tools for fixing
177 broken databases, and to ensure they have the proper indexes.
178 - add udev rules for Bacula devices.
179 - If a job terminates, the DIR connection can close before the
180 Volume info is updated, leaving the File count wrong.
181 - Look at why SIGPIPE during connection can cause seg fault in
182 writing the daemon message, when Dir dropped to bacula:bacula
183 - Look at zlib 32 => 64 problems.
184 - Possibly turn on St. Bernard code.
185 - Fix bextract to restore ACLs, or better yet, use common routines.
186 - Do we migrate appendable Volumes?
187 - Remove queue.c code.
188 - Print warning message if LANG environment variable does not specify
190 - New dot commands from Arno.
191 .show device=xxx lists information from one storage device, including
192 devices (I'm not even sure that information exists in the DIR...)
193 .move eject device=xxx mostly the same as 'unmount xxx' but perhaps with
194 better machine-readable output like "Ok" or "Error busy"
195 .move eject device=xxx toslot=yyy the same as above, but with a new
196 target slot. The catalog should be updated accordingly.
197 .move transfer device=xxx fromslot=yyy toslot=zzz
200 - Article: http://www.heise.de/open/news/meldung/83231
201 - Article: http://www.golem.de/0701/49756.html
202 - Article: http://lwn.net/Articles/209809/
203 - Article: http://www.onlamp.com/pub/a/onlamp/2004/01/09/bacula.html
204 - Article: http://www.linuxdevcenter.com/pub/a/linux/2005/04/07/bacula.html
205 - Article: http://www.osreviews.net/reviews/admin/bacula
206 - Article: http://www.debianhelp.co.uk/baculaweb.htm
208 - Wikis mentioning Bacula
209 http://wiki.finkproject.org/index.php/Admin:Backups
210 http://wiki.linuxquestions.org/wiki/Bacula
211 http://www.openpkg.org/product/packages/?package=bacula
212 http://www.iterating.com/products/Bacula
213 http://net-snmp.sourceforge.net/wiki/index.php/Net-snmp_extensions
214 http://www.section6.net/wiki/index.php/Using_Bacula_for_Tape_Backups
215 http://bacula.darwinports.com/
216 http://wiki.mandriva.com/en/Releases/Corporate/Server_4/Notes#Bacula
217 http://en.wikipedia.org/wiki/Bacula
220 http://www.devco.net/pubwiki/Bacula/
221 http://paramount.ind.wpi.edu/wiki/doku.php
222 http://gentoo-wiki.com/HOWTO_Backup
223 http://www.georglutz.de/wiki/Bacula
224 http://www.clarkconnect.com/wiki/index.php?title=Modules_-_LAN_Backup/Recovery
225 http://linuxwiki.de/Bacula (in German)
227 - Possibly allow SD to spool even if a tape is not mounted.
228 - It appears to me that you have run into some sort of race
229 condition where two threads want to use the same Volume and they
230 were both given access. Normally that is no problem. However,
231 one thread wanted the particular Volume in drive 0, but it was
232 loaded into drive 1 so it decided to unload it from drive 1 and
233 then loaded it into drive 0, while the second thread went on
234 thinking that the Volume could be used in drive 1 not realizing
235 that in between time, it was loaded in drive 0.
236 I'll look at the code to see if there is some way we can avoid
237 this kind of problem. Probably the best solution is to make the
238 first thread simply start using the Volume in drive 1 rather than
239 transferring it to drive 0.
240 - Fix re-read of last block to check if job has actually written
241 a block, and check if block was written by a different job
242 (i.e. multiple simultaneous jobs writing).
243 - Figure out how to configure query.sql. Suggestion to use m4:
244 == changequote.m4 ===
245 changequote(`[',`]')dnl
246 ==== query.sql.in ===
247 :List next 20 volumes to expire
249 Pool.Name AS PoolName,
254 [ FROM_UNIXTIME(UNIX_TIMESTAMP(Media.LastWritten) Media.VolRetention) AS Expire, ])dnl
256 [ media.lastwritten + interval '1 second' * media.volretention as expire, ])dnl
260 ON Media.PoolId=Pool.PoolId
261 WHERE Media.LastWritten>0
265 Command: m4 -DmySQL changequote.m4 query.sql.in >query.sql
267 The problem is that it requires m4, which is not present on all machines
269 - Given all the problems with FIFOs, I think the solution is to do something a
270 little different, though I will look at the code and see if there is not some
271 simple solution (i.e. some bug that was introduced). What might be a better
272 solution would be to use a FIFO as a sort of "key" to tell Bacula to read and
273 write data to a program rather than the FIFO. For example, suppose you
278 Then, I could imagine if you backup and restore this file with a direct
279 reference as is currently done for fifos, instead, during backup Bacula will
282 /home/kern/my-fifo.backup
284 and read the data that my-fifo.backup writes to stdout. For restore, Bacula
287 /home/kern/my-fifo.restore
289 and send the data backed up to stdout. These programs can either be an
290 executable or a shell script and they need only read/write to stdin/stdout.
292 I think this would give a lot of flexibility to the user without making any
293 significant changes to Bacula.
298 select FilenameId from Filename where Name='';
299 # Get list of all directories referenced in a Backup.
300 select Path.Path from Path,File where File.JobId=nnn and
301 File.FilenameId=(FilenameId-from-above) and File.PathId=Path.PathId
302 order by Path.Path ASC;
304 - Look into using Dart for testing
305 http://public.kitware.com/Dart/HTML/Index.shtml
307 - Look into replacing autotools with cmake
308 http://www.cmake.org/HTML/Index.html
310 === Migration from David ===
311 What I'd like to see:
314 Name = "<poolname>-migrate"
318 Migration Selection Type = LowestUtil | OldestVol | PoolOccupancy |
319 Client | PoolResidence | Volume | JobName | SQLquery
320 Migration Selection Pattern = "regexp"
321 Next Pool = <override>
324 There should be no need for a Level (migration is always Full, since you
325 don't calculate differential/incremental differences for migration),
326 Storage should be determined by the volume types in the pool, and Client
327 is really a selection issue. Migration should always occur to the
328 NextPool defined in the pool definition. If no nextpool is defined, the
329 job should end with a reason of "no place to go". If Next Pool statement
330 is present, we override the check in the pool definition and use the
333 Here's how I'd define Migration Selection Types:
336 Client -- Migrate data from selected client only. Migration Selection
337 Pattern regexp provides pattern to select client names, eg ^FS00* makes
338 all client names starting with FS00 eligible for migration.
340 Jobname -- Migration all jobs matching name. Migration Selection Pattern
341 regexp provides pattern to select jobnames existing in pool.
343 Volume -- Migrate all data on specified volumes. Migration Selection
344 Pattern regexp provides selection criteria for volumes to be migrated.
345 Volumes must exist in pool to be eligible for migration.
349 LowestUtil -- Identify the volume in the pool with the least data on it
350 and empty it. No Migration Selection Pattern required.
352 OldestVol -- Identify the LRU volume with data written, and empty it. No
353 Migration Selection Pattern required.
355 PoolOccupancy -- if pool occupancy exceeds <highmig>, migrate volumes
356 (starting with most full volumes) until pool occupancy drops below
357 <lowmig>. Pool highmig and lowmig values are in pool definition, no
358 Migration Selection Pattern required.
362 SQLQuery -- Migrate all jobuids returned by the supplied SQL query.
363 Migration Selection Pattern contains SQL query to execute; should return
364 a list of 1 or more jobuids to migrate.
366 PoolResidence -- Migrate data sitting in pool for longer than
367 PoolResidence value in pool definition. Migration Selection Pattern
368 optional; if specified, override value in pool definition (value in
372 [ possibly a Python event -- kes ]
374 - Mount on an Autochanger with no tape in the drive causes:
375 Automatically selected Storage: LTO-changer
376 Enter autochanger drive[0]: 0
377 3301 Issuing autochanger "loaded drive 0" command.
378 3302 Autochanger "loaded drive 0", result: nothing loaded.
379 3301 Issuing autochanger "loaded drive 0" command.
380 3302 Autochanger "loaded drive 0", result: nothing loaded.
381 3902 Cannot mount Volume on Storage Device "LTO-Drive1" (/dev/nst0) because:
382 Couldn't rewind device "LTO-Drive1" (/dev/nst0): ERR=dev.c:678 Rewind error on "LTO-Drive1" (/dev/nst0). ERR=No medium found.
383 3905 Device "LTO-Drive1" (/dev/nst0) open but no Bacula volume is mounted.
384 If this is not a blank tape, try unmounting and remounting the Volume.
385 - If Drive 0 is blocked, and drive 1 is set "Autoselect=no", drive 1 will
387 - Autochanger did not change volumes.
388 select * from Storage;
389 +-----------+-------------+-------------+
390 | StorageId | Name | AutoChanger |
391 +-----------+-------------+-------------+
392 | 1 | LTO-changer | 0 |
393 +-----------+-------------+-------------+
394 05-May 03:50 roxie-sd: 3302 Autochanger "loaded drive 0", result is Slot 11.
395 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Warning: Director wanted Volume "LT
396 Current Volume "LT0-002" not acceptable because:
397 1997 Volume "LT0-002" not in catalog.
398 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Error: Autochanger Volume "LT0-002"
399 Setting InChanger to zero in catalog.
400 05-May 03:50 roxie-dir: Tibs.2006-05-05_03.05.02 Error: Unable to get Media record
402 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: Error getting Volume i
403 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: Job 530 canceled.
404 05-May 03:50 roxie-sd: Tibs.2006-05-05_03.05.02 Fatal error: spool.c:249 Fatal appe
405 05-May 03:49 Tibs: Tibs.2006-05-05_03.05.02 Fatal error: c:\cygwin\home\kern\bacula
414 FirstWritten: 2006-05-05 03:11:54
415 LastWritten: 2006-05-05 03:50:23
416 LabelDate: 2005-12-26 16:52:40
427 VolRetention: 31,536,000
439 Note VolStatus is blank!!!!!
446 FirstWritten: 0000-00-00 00:00:00
447 LastWritten: 0000-00-00 00:00:00
448 LabelDate: 2005-12-26 16:52:40
459 VolRetention: 31,536,000
472 Automatically selected Storage: LTO-changer
473 Enter autochanger drive[0]: 0
474 3301 Issuing autochanger "loaded drive 0" command.
475 3302 Autochanger "loaded drive 0", result: nothing loaded.
476 3301 Issuing autochanger "loaded drive 0" command.
477 3302 Autochanger "loaded drive 0", result: nothing loaded.
478 3902 Cannot mount Volume on Storage Device "LTO-Drive1" (/dev/nst0) because:
479 Couldn't rewind device "LTO-Drive1" (/dev/nst0): ERR=dev.c:678 Rewind error on "LTO-Drive1" (/dev/nst0). ERR=No medium found.
481 3905 Device "LTO-Drive1" (/dev/nst0) open but no Bacula volume is mounted.
482 If this is not a blank tape, try unmounting and remounting the Volume.
484 - http://www.dwheeler.com/essays/commercial-floss.html
485 - Add VolumeLock to prevent all but lock holder (SD) from updating
486 the Volume data (with the exception of VolumeState).
487 - The btape fill command does not seem to use the Autochanger
488 - Make Windows installer default to system disk drive.
489 - Look at using ioctl(FIOBMAP, ...) on Linux, and
490 DeviceIoControl(..., FSCTL_QUERY_ALLOCATED_RANGES, ...) on
491 Win32 for sparse files.
492 http://www.flexhex.com/docs/articles/sparse-files.phtml
493 http://www.informatik.uni-frankfurt.de/~loizides/reiserfs/fibmap.html
494 - Directive: at <event> "command"
495 - Command: pycmd "command" generates "command" event. How to
496 attach to a specific job?
497 - Integrate Christopher's St. Bernard code.
498 - run_cmd() returns int should return JobId_t
499 - get_next_jobid_from_list() returns int should return JobId_t
500 - Document export LDFLAGS=-L/usr/lib64
501 - Don't attempt to restore from "Disabled" Volumes.
502 - Network error on Win32 should set Win32 error code.
503 - What happens when you rename a Disk Volume?
504 - Job retention period in a Pool (and hence Volume). The job would
506 - Look at -D_FORTIFY_SOURCE=2
507 - Add Win32 FileSet definition somewhere
508 - Look at fixing restore status stats in SD.
509 - Look at using ioctl(FIMAP) and FIGETBSZ for sparse files.
510 http://www.informatik.uni-frankfurt.de/~loizides/reiserfs/fibmap.html
511 - Implement a mode that says when a hard read error is
512 encountered, read many times (as it currently does), and if the
513 block cannot be read, skip to the next block, and try again. If
514 that fails, skip to the next file and try again, ...
516 create table LevelType (LevelType binary(1), LevelTypeLong tinyblob);
517 insert into LevelType (LevelType,LevelTypeLong) values
521 - Show files/second in client status output.
522 - Add a recursive mark command (rmark) to restore.
523 - "Minimum Job Interval = nnn" sets minimum interval between Jobs
524 of the same level and does not permit multiple simultaneous
525 running of that Job (i.e. lets any previous invocation finish
526 before doing Interval testing).
527 - Look at simplifying File exclusions.
528 - New directive "Delete purged Volumes"
529 - new pool XXX with ScratchPoolId = MyScratchPool's PoolId and
530 let it fill itself, and RecyclePoolId = XXX's PoolId so I can
531 see if it become stable and I just have to supervise
533 - If I want to remove this pool, I set RecyclePoolId = MyScratchPool's
534 PoolId, and when it is empty remove it.
535 - Figure out how to recycle Scratch volumes back to the Scratch Pool.
537 - Allow Check Labels to be used with Bacula labels.
538 - "Resuming" a failed backup (lost line for example) by using the
539 failed backup as a sort of "base" job.
541 - Email to the user when the tape is about to need changing x
542 days before it needs changing.
543 - Command to show next tape that will be used for a job even
544 if the job is not scheduled.
545 - From: Arunav Mandal <amandal@trolltech.com>
546 1. When jobs are running and bacula for some reason crashes or if I do a
547 restart it remembers and jobs it was running before it crashed or restarted
548 as of now I loose all jobs if I restart it.
550 2. When spooling and in the midway if client is disconnected for instance a
551 laptop bacula completely discard the spool. It will be nice if it can write
552 that spool to tape so there will be some backups for that client if not all.
554 3. We have around 150 clients machines it will be nice to have a option to
555 upgrade all the client machines bacula version automatically.
557 4. Atleast one connection should be reserved for the bconsole so at heavy load
558 I should connect to the director via bconsole which at sometimes I can't
560 5. Another most important feature that is missing, say at 10am I manually
561 started backup of client abc and it was a full backup since client abc has
562 no backup history and at 10.30am bacula again automatically started backup of
563 client abc as that was in the schedule. So now we have 2 multiple Full
564 backups of the same client and if we again try to start a full backup of
565 client backup abc bacula won't complain. That should be fixed.
567 - Fix bpipe.c so that it does not modify results pointer.
568 ***FIXME*** calling sequence should be changed.
569 - For Windows disaster recovery see http://unattended.sf.net/
570 - regardless of the retention period, Bacula will not prune the
571 last Full, Diff, or Inc File data until a month after the
572 retention period for the last Full backup that was done.
573 - update volume=xxx --- add status=Full
574 - Remove old spool files on startup.
575 - Exclude SD spool/working directory.
576 - Refuse to prune last valid Full backup. Same goes for Catalog.
578 - Make a callback when Rerun failed levels is called.
579 - Give Python program access to Scheduled jobs.
580 - Add setting Volume State via Python.
581 - Python script to save with Python, not save, save with Bacula.
582 - Python script to do backup.
584 - Change the Priority, Client, Storage, JobStatus (error)
585 at the start of a job.
586 - Why is SpoolDirectory = /home/bacula/spool; not reported
587 as an error when writing a DVD?
588 - Make bootstrap file handle multiple MediaTypes (SD)
589 - Remove all old Device resource code in Dir and code to pass it
590 back in SD -- better, rework it to pass back device statistics.
591 - Check locking of resources -- be sure to lock devices where previously
592 resources were locked.
593 - The last part is left in the spool dir.
596 - In restore don't compare byte count on a raw device -- directory
597 entry does not contain bytes.
601 MA = (last_MA * 3 + rate) / 4
602 rate = (bytes - last_bytes) / (runtime - last_runtime)
603 - Max Vols limit in Pool off by one?
604 - Implement Files/Bytes,... stats for restore job.
605 - Implement Total Bytes Written, ... for restore job.
606 - Despool attributes simultaneously with data in a separate
607 thread, rejoined at end of data spooling.
608 - 7. Implement new Console commands to allow offlining/reserving drives,
609 and possibly manipulating the autochanger (much asked for).
610 - Add start/end date editing in messages (%t %T, %e?) ...
611 - Add ClientDefs similar to JobDefs.
612 - Print more info when bextract -p accepts a bad block.
613 - Fix FD JobType to be set before RunBeforeJob in FD.
614 - Look at adding full Volume and Pool information to a Volume
615 label so that bscan can get *all* the info.
616 - If the user puts "Purge Oldest Volume = yes" or "Recycle Oldest Volume = yes"
617 and there is only one volume in the pool, refuse to do it -- otherwise
618 he fills the Volume, then immediately starts reusing it.
619 - Implement copies and stripes.
620 - Add history file to console.
621 - Each file on tape creates a JobMedia record. Peter has 4 million
622 files spread over 10000 tape files and four tapes. A restore takes
623 16 hours to build the restore list.
624 - Add and option to check if the file size changed during backup.
625 - Make sure SD deletes spool files on error exit.
626 - Delete old spool files when SD starts.
627 - When labeling tapes, if you enter 000026, Bacula uses
628 the tape index rather than the Volume name 000026.
629 - Add offline tape command to Bacula console.
631 Enter MediaId or Volume name: 32
632 Enter new Volume name: DLT-20Dec04
633 Automatically selected Pool: Default
634 Connecting to Storage daemon DLTDrive at 192.168.68.104:9103 ...
635 Sending relabel command from "DLT-28Jun03" to "DLT-20Dec04" ...
636 block.c:552 Write error at 0:0 on device /dev/nst0. ERR=Bad file descriptor.
637 Error writing final EOF to tape. This tape may not be readable.
638 dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
639 askdir.c:219 NULL Volume name. This shouldn't happen!!!
640 3912 Failed to label Volume: ERR=dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
641 Label command failed for Volume DLT-20Dec04.
642 Do not forget to mount the drive!!!
643 - Bug: if a job is manually scheduled to run later, it does not appear
644 in any status report and cannot be cancelled.
646 ==== Keeping track of deleted/new files ====
647 - To mark files as deleted, run essentially a Verify to disk, and
648 when a file is found missing (MarkId != JobId), then create
649 a new File record with FileIndex == -1. This could be done
650 by the FD at the same time as the backup.
652 My "trick" for keeping track of deletions is the following.
653 Assuming the user turns on this option, after all the files
654 have been backed up, but before the job has terminated, the
655 FD will make a pass through all the files and send their
656 names to the DIR (*exactly* the same as what a Verify job
657 currently does). This will probably be done at the same
658 time the files are being sent to the SD avoiding a second
659 pass. The DIR will then compare that to what is stored in
660 the catalog. Any files in the catalog but not in what the
661 FD sent will receive a catalog File entry that indicates
662 that at that point in time the file was deleted. This
663 either transmitted to the FD or simultaneously computed in
664 the FD, so that the FD can put a record on the tape that
665 indicates that the file has been deleted at this point.
666 A delete file entry could potentially be one with a FileIndex
667 of 0 or perhaps -1 (need to check if FileIndex is used for
668 some other thing as many of the Bacula fields are "overloaded"
671 During a restore, any file initially picked up by some
672 backup (Full, ...) then subsequently having a File entry
673 marked "delete" will be removed from the tree, so will not
674 be restored. If a file with the same name is later OK it
675 will be inserted in the tree -- this already happens. All
676 will be consistent except for possible changes during the
679 Since I'm on the subject, some of you may be wondering what
680 the utility of the in memory tree is if you are going to
681 restore everything (at least it comes up from time to time
682 on the list). Well, it is still *very* useful because it
683 allows only the last item found for a particular filename
684 (full path) to be entered into the tree, and thus if a file
685 is backed up 10 times, only the last copy will be restored.
686 I recently (last Friday) restored a complete directory, and
687 the Full and all the Differential and Incremental backups
688 spanned 3 Volumes. The first Volume was not even mounted
689 because all the files had been updated and hence backed up
690 since the Full backup was made. In this case, the tree
691 saved me a *lot* of time.
693 Make sure this information is stored on the tape too so
694 that it can be restored directly from the tape.
696 All the code (with the exception of formally generating and
697 saving the delete file entries) already exists in the Verify
698 Catalog command. It explicitly recognizes added/deleted files since
699 the last InitCatalog. It is more or less a "simple" matter of
700 taking that code and adapting it slightly to work for backups.
702 Comments from Martin Simmons (I think they are all covered):
703 Ok, that should cover the basics. There are few issues though:
705 - Restore will depend on the catalog. I think it is better to include the
706 extra data in the backup as well, so it can be seen by bscan and bextract.
708 - I'm not sure if it will preserve multiple hard links to the same inode. Or
709 maybe adding or removing links will cause the data to be dumped again?
711 - I'm not sure if it will handle renamed directories. Possibly it will work
712 by dumping the whole tree under a renamed directory?
714 - It remains to be seen how the backup performance of the DIR's will be
715 affected when comparing the catalog for a large filesystem.
719 How about introducing a Type = MgmtPolicy job type? That job type would
720 be responsible for scanning the Bacula environment looking for specific
721 conditions, and submitting the appropriate jobs for implementing said
725 Name = "Migration-Policy"
727 Policy Selection Job Type = Migrate
728 Scope = "<keyword> <operator> <regexp>"
729 Threshold = "<keyword> <operator> <regexp>"
730 Job Template = <template-name>
733 Where <keyword> is any legal job keyword, <operator> is a comparison
734 operator (=,<,>,!=, logical operators AND/OR/NOT) and <regexp> is a
735 appropriate regexp. I could see an argument for Scope and Threshold
736 being SQL queries if we want to support full flexibility. The
737 Migration-Policy job would then get scheduled as frequently as a site
738 felt necessary (suggested default: every 15 minutes).
743 Name = "Migration-Policy"
745 Policy Selection Job Type = Migration
747 Threshold = "Migration Selection Type = LowestUtil"
748 Job Template = "MigrationTemplate"
751 would select all pools for examination and generate a job based on
752 MigrationTemplate to automatically select the volume with the lowest
753 usage and migrate it's contents to the nextpool defined for that pool.
755 This policy abstraction would be really handy for adjusting the behavior
756 of Bacula according to site-selectable criteria (one thing that pops
757 into mind is Amanda's ability to automatically adjust backup levels
758 depending on various criteria).
764 - Add Pool/Storage override regression test.
765 - Add delete JobId to regression.
766 - Add a regression test for dbcheck.
767 - New test to add bscan to four-concurrent-jobs regression,
768 i.e. after the four-concurrent jobs zap the
769 database as is done in the bscan-test, then use bscan to
770 restore the database, do a restore and compare with the
772 - Add restore of specific JobId to regression (item 3
773 on the restore prompt)
774 - Add IPv6 to regression
775 - Add database test to regression. Test each function like delete,
778 - AntiVir can slow down backups on Win32 systems.
779 - Win32 systems with FAT32 can be much slower than NTFS for
780 more than 1000 files per directory.
784 - A HOLD command to stop all jobs from starting.
785 - A PAUSE command to pause all running jobs ==> release the
787 - Media Type = LTO,LTO-2,LTO-3
788 Media Type Read = LTO,LTO2,LTO3
789 Media Type Write = LTO2, LTO3
791 === From Carsten Menke <bootsy52@gmx.net>
793 Following is a list of what I think in the situations where I'm faced with,
794 could be a usefull enhancement to bacula, which I'm certain other users will
795 benefit from as well.
797 1. NextJob/NextJobs Directive within a Job Resource in the form of
798 NextJobs = job1,job2.
801 I currently solved the problem with running multiple jobs each after each
802 by setting the Max Wait Time for a job to 8 hours, and give
803 the jobs different Priorities. However, there scenarios where
804 1 Job is directly depending on another job, so if the former job fails,
805 the job after it needn't to be run
806 while maybe other jobs should run despite of that
809 A Backup Job and a Verify job, if the backup job fails there is no need to run
810 the verify job, as the backup job already failed. However, one may like
811 to backup the Catalog to disk despite of that the main backup job failed.
814 I see that this is related to the Event Handlers which are on the ToDo
815 list, also it is maybe a good idea to check for the return value and
816 execute different actions based on the return value
819 3. offline capability to bconsole
822 Currently I use a script which I execute within the last Job via the
823 RunAfterJob Directive, to release and eject the tape.
824 So I have to call bconsole "release=Storage-Name" and afterwards
825 mt -f /dev/nst0 eject to get the tape out.
827 If I have multiple Storage Devices, than these may not be /dev/nst0 and
828 I have to modify the script or call it with parameters etc.
829 This would actually not be needed, as everything is already defined
830 in bacula-sd.conf and if I can invoke bconsole with the
831 storage name via $1 in the script than I'm done and information is
834 4. %s for Storage Name added to the chars being substituted in "RunAfterJob"
838 For the reason mentioned in 3. to have the ability to call a
839 script with /scripts/foobar %s and in the script use $1
840 to pass the Storage Name to bconsole
842 5. Setting Volume State within a Job Resource
845 Instead of using "Maximum Volume Jobs" in the Pool Resource,
846 I would have the possibilty to define
847 in a Job Resource that after this certain job is run, the Volume State
848 should be set to "Volume State = Used", this give more flexibility (IMHO).
850 6. Localization of Bacula Messages
853 Unfortunatley many,many people I work with don't speak english very well.
854 So if at least the Reporting messages would be localized then they
855 would understand that they have to change the tape,etc. etc.
857 I volunteer to do the german translations, and if I can convince my wife also
858 french and Morre (western african language).
860 7. OK, this is evil, probably bound to security risks and maybe not possible
861 due to the design of bacula.
863 Implementation of Backtics ( `command` ) for shell comand execution to
864 the "Label Format" Directive.
868 Currently I have defined BACULA_DAY_OF_WEEK="day1|day2..." resulting in
869 Label Format = "HolyBackup-${BACULA_DAY_OF_WEEK[${WeekDay}]}". If I could
870 use backticks than I could use "Label Format = HolyBackup-`date +%A` to have
871 the localized name for the day of the week appended to the
872 format string. Then I have the tape labeled automatically with weekday
873 name in the correct language.
875 - Yes, that is surely the case. I probably should turn those into Warning
876 errors. In addition, you just made me think that it might not be bad to
877 add an option to check the file size after backing up the file and
878 report if it changes. This would be done as an option because it would
881 Kern, good idea. If you do do that, mention in the output: file
882 shrunk, or file expanded, just to make it obvious to the user
883 (without having to the refer to file size), just how the file size
886 Would this option be for all file, or just one file? Or a fileset?
887 - Make output from status use html table tags for nicely
888 presenting in a browser.
889 - Can one write tapes faster with 8192 byte block sizes?
890 - Document security problems with the same password for everyone in
891 rpm and Win32 releases.
892 - Browse generations of files.
893 - I've seen an error when my catalog's File table fills up. I
894 then have to recreate the File table with a larger maximum row
895 size. Relevant information is at
896 http://dev.mysql.com/doc/mysql/en/Full_table.html ; I think the
897 "Installing and Configuring MySQL" chapter should talk a bit
898 about this potential problem, and recommend a solution.
899 - For Solaris must use POSIX awk.
900 - Want speed of writing to tape while despooling.
901 - Supported autochanger:
909 Wangtek 6525ES (SCSI-1 QIC drive, 525MB), under Linux 2.4.something,
910 bacula 1.36.0/1 works with blocksize 16k INSIDE bacula-sd.conf.
911 - Add regex from http://www.pcre.org to Bacula for Win32.
912 - Use only shell tools no make in CDROM package.
913 - Include within include does it work?
914 - Implement a Pool of type Cleaning?
915 - Implement VolReadTime and VolWriteTime in SD
916 - Modify Backing up Your Database to include a bootstrap file.
917 - Think about making certain database errors fatal.
918 - Look at correcting the time jump in the scheduler for daylight
919 savings time changes.
920 - Add a "real" timer to network connections.
921 - Promote to Full = Time period
922 - Check dates entered by user for correctness (month/day/... ranges)
923 - Compress restore Volume listing by date and first file.
924 - Look at patches/bacula_db.b2z postgresql that loops during restore.
926 - Perhaps add read/write programs and/or plugins to FileSets.
927 - How to handle backing up portables ...
928 - Add some sort of guaranteed Interval for upgrading jobs.
929 - Can we write the state file after every job terminates? On Win32
930 the system crashes and the state file is not updated.
933 Documentation to do: (any release a little bit at a time)
934 - Doc to do unmount before removing magazine.
935 - Alternative to static linking "ldd prog" save all binaries listed,
936 restore them and point LD_LIBRARY_PATH to them.
937 - Document add "</dev/null >/dev/null 2>&1" to the bacula-fd command line
938 - Document query file format.
939 - Add more documentation for bsr files.
940 - Document problems with Verify and pruning.
941 - Document how to use multiple databases.
942 - VXA drives have a "cleaning required"
943 indicator, but Exabyte recommends preventive cleaning after every 75
946 In this context, it should be noted that Exabyte has a command-line
947 vxatool utility available for free download. (The current version is
948 vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
949 test the drive, unload tapes, change drive settings, flash new firmware,
951 Of particular interest in this context is that vxatool <device> -i will
952 report, among other details, the time since last cleaning in tape motion
953 minutes. This information can be retrieved (and settings changed, for
954 that matter) through the generic-SCSI device even when Bacula has the
955 regular tape device locked. (Needless to say, I don't recommend
956 changing tape settings while a job is running.)
957 - Lookup HP cleaning recommendations.
958 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
959 - Document doing table repair
962 ===================================
963 - Add macro expansions in JobDefs.
964 Run Before Job = "SomeFile %{Level} %{Client}"
965 Write Bootstrap="/some/dir/%{JobName}_%{Client}.bsr"
966 - Use non-blocking network I/O but if no data is available, use
968 - Use gather write() for network I/O.
969 - Autorestart on crash.
970 - Add bandwidth limiting.
971 - Add acks every once and a while from the SD to keep
972 the line from timing out.
973 - When an error in input occurs and conio beeps, you can back
974 up through the prompt.
975 - Detect fixed tape block mode during positioning by looking at
976 block numbers in btape "test". Possibly adjust in Bacula.
977 - Fix list volumes to output volume retention in some other
978 units, perhaps via a directive.
979 - Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
980 with multiple priorities.
981 - If you use restore replace=never, the directory attributes for
982 non-existent directories will not be restored properly.
984 - see lzma401.zip in others directory for new compression
986 - Allow the user to select JobType for manual pruning/purging.
987 - bscan does not put first of two volumes back with all info in
989 - Implement the FreeBSD nodump flag in chflags.
990 - Figure out how to make named console messages go only to that
991 console and to the non-restricted console (new console class?).
992 - Make restricted console prompt for password if *ask* is set or
993 perhaps if password is undefined.
994 - Implement "from ISO-date/time every x hours/days/weeks/months" in
997 ==== from Marc Schoechlin
998 - the help-command should be more verbose
999 (it should explain the paramters of the different
1001 -> its time-comsuming to consult the manual anytime
1002 you need a special parameter
1003 -> maybe its more easy to maintain this, if the
1004 descriptions of that commands are outsourced to
1006 - the cd-command should allow complete paths
1007 i.e. cd /foo/bar/foo/bar
1008 -> if a customer mails me the path to a certain file,
1009 its faster to enter the specified directory
1010 - if the password is not configured in bconsole.conf
1011 you should be asked for it.
1012 -> sometimes you like to do restore on a customer-machine
1013 which shouldnt know the password for bacula.
1014 -> adding the password to the file favours admins
1015 to forget to remove the password after usage
1017 the protection of that file is less important
1018 - long-listed-output of commands should be scrollable
1019 like the unix more/less-command does
1020 -> if someone runs 200 and more machines, the lists could
1021 be a little long and complex
1022 - command-output should be shown column by column
1023 to reduce scrolling and to increase clarity
1025 - lsmark should list the selected files with full
1027 - wildcards for selecting and file and directories would be nice
1028 - any actions should be interuptable with STRG+C
1029 - command-expansion would be pretty cool
1031 - When the replace Never option is set, new directory permissions
1032 are not restored. See bug 213. To fix this requires creating a
1033 list of newly restored directories so that those directory
1034 permissions *can* be restored.
1035 - Add prune all command
1036 - Document fact that purge can destroy a part of a restore by purging
1037 one volume while others remain valid -- perhaps mark Jobs.
1038 - Add multiple-media-types.txt
1039 - look at mxt-changer.html
1040 - Make ? do a help command (no return needed).
1041 - Implement restore directory.
1042 - Document streams and how to implement them.
1043 - Try not to re-backup a file if a new hard link is added.
1044 - Add feature to backup hard links only, but not the data.
1045 - Fix stream handling to be simpler.
1046 - Add Priority and Bootstrap to Run a Job.
1047 - Eliminate Restore "Run Restore Job" prompt by allowing new "run command
1049 - Remove View FileSet button from Run a Job dialog.
1050 - Handle prompt for restore job at end of Restore command.
1051 - Add display of total selected files to Restore window.
1052 - Add tree pane to left of window.
1053 - Add progress meter.
1054 - Max wait time or max run time causes seg fault -- see runtime-bug.txt
1055 - Add message to user to check for fixed block size when the forward
1056 space test fails in btape.
1057 - When unmarking a directory check if all files below are unmarked and
1058 then remove the + flag -- in the restore tree.
1059 - Possibly implement: Action = Unmount Device="TapeDrive1" in Admin jobs.
1060 - Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
1061 - Revisit the question of multiple Volumes (disk) on a single device.
1062 - Add a block copy option to bcopy.
1063 - Finish work on Gnome restore GUI.
1064 - Fix "llist jobid=xx" where no fileset or client exists.
1065 - For each job type (Admin, Restore, ...) require only the really necessary
1066 fields.- Pass Director resource name as an option to the Console.
1067 - Add a "batch" mode to the Console (no unsolicited queries, ...).
1068 - Add a .list all files in the restore tree (probably also a list all files)
1069 Do both a long and short form.
1070 - Allow browsing the catalog to see all versions of a file (with
1071 stat data on each file).
1072 - Restore attributes of directory if replace=never set but directory
1074 - Use SHA1 on authentication if possible.
1075 - See comtest-xxx.zip for Windows code to talk to USB.
1076 - Add John's appended files:
1077 Appended = { /files/server/logs/http/*log }
1078 and such files would be treated as follows.On a FULL backup, they would
1079 be backed up like any other file.On an INCREMENTAL backup, where a
1080 previous INCREMENTAL or FULL was already in thecatalogue and the length
1081 of the file wasgreater than the length of the last backup, only thedata
1082 added since the last backup will be dumped.On an INCREMENTAL backup, if
1083 the length of the file is less than thelength of the file with the same
1084 name last backed up, the completefile is dumped.On Windows systems, with
1085 creation date of files, we can be evensmarter about this and not count
1086 entirely upon the length.On a restore, the full and all incrementals
1087 since it will beapplied in sequence to restore the file.
1088 - Check new HAVE_WIN32 open bits.
1089 - Check if the tape has moved before writing.
1090 - Handling removable disks -- see below:
1091 - Keep track of tape use time, and report when cleaning is necessary.
1092 - Add FromClient and ToClient keywords on restore command (or
1093 BackupClient RestoreClient).
1094 - Implement a JobSet, which groups any number of jobs. If the
1095 JobSet is started, all the jobs are started together.
1096 Allow Pool, Level, and Schedule overrides.
1097 - Enhance cancel to timeout BSOCK packets after a specific delay.
1098 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
1099 ua_status.!!! Thanks to Alan Brown for this tip.
1100 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
1101 correctly for multiple simultaneous jobs.
1102 - Correct code so that FileSet MD5 is calculated for < and | filename
1104 - Implement the Media record flag that indicates that the Volume does disk
1106 - Implement VolAddr, which is used when Volume is addressed like a disk,
1107 and form it from VolFile and VolBlock.
1108 - Make multiple restore jobs for multiple media types specifying
1109 the proper storage type.
1110 - Fix fast block rejection (stored/read_record.c:118). It passes a null
1111 pointer (rec) to try_repositioning().
1112 - Look at extracting Win data from BackupRead.
1113 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
1114 which would take precidence over the Catalog "JobRetention".
1115 - Implement Label Format in Add and Label console commands.
1116 - Possibly up network buffers to 65K. Put on variable.
1117 - Put email tape request delays on one or more variables. User wants
1118 to cancel the job after a certain time interval. Maximum Mount Wait?
1119 - Job, Client, Device, Pool, or Volume?
1120 Is it possible to make this a directive which is *optional* in multiple
1121 resources, like Level? If so, I think I'd make it an optional directive
1122 in Job, Client, and Pool, with precedence such that Job overrides Client
1123 which in turn overrides Pool.
1125 - New Storage specifications:
1126 - Want to write to multiple storage devices simultaneously
1127 - Want to write to multiple storage devices sequentially (in one job)
1128 - Want to read/write simultaneously
1129 - Key is MediaType -- it must match
1131 Passed to SD as a sort of BSR record called Storage Specification
1135 MediaType -> Next MediaType
1137 Device -> Next Device
1139 Allow multiple Storage specifications
1147 Allow Multiple Pool specifications (note, Pool currently
1149 Allow Multiple MediaType specifications in Dir conf
1150 Allow Multiple Device specifications in Dir conf
1151 Perhaps keep this in a single SSR
1152 Tie a Volume to a specific device by using a MediaType that
1153 is contained in only one device.
1154 In SD allow Device to have Multiple MediaTypes
1156 - Ideas from Jerry Scharf:
1157 First let's point out some big pluses that bacula has for this
1159 more importantly it's active. Thank you so much for that
1160 even more important, it's not flaky
1161 it has an open access catalog, opening many possibilities
1162 it's pushing toward heterogeneous systems capability
1164 Macintosh file client
1165 macs are an interesting niche, but I fear a server is a rathole
1166 working bare iron recovery for windows
1167 the option for inc/diff backups not reset on fileset revision
1168 a) use both change and inode update time against base time
1169 b) do the full catalog check (expensive but accurate)
1170 sizing guide (how much system is needed to back up N systems/files)
1171 consultants on using bacula in building a disaster recovery system
1172 an integration guide
1173 or how to get at fancy things that one could do with bacula
1174 logwatch code for bacula logs (or similar)
1175 linux distro inclusion of bacula (brings good and bad, but necessary)
1176 win2k/XP server capability (icky but you asked)
1177 support for Oracle database ??
1179 - Look at adding SQL server and Exchange support for Windows.
1180 - Make dev->file and dev->block_num signed integers so that -1 can
1181 be an invalid value which happens with BSR.
1182 - Create VolAddr for disk files in place of VolFile and VolBlock. This
1183 is needed to properly specify ranges.
1184 - Add progress of files/bytes to SD and FD.
1185 - Print warning message if FileId > 4 billion
1186 - do a "messages" before the first prompt in Console
1187 - Client does not show busy during Estimate command.
1188 - Implement Console mtx commands.
1189 - Implement a Mount Command and an Unmount Command where
1190 the users could specify a system command to be performed
1191 to do the mount, after which Bacula could attempt to
1192 read the device. This is for Removeable media such as a CDROM.
1193 - Most likely, this mount command would be invoked explicitly
1194 by the user using the current Console "mount" and "unmount"
1195 commands -- the Storage Daemon would do the right thing
1196 depending on the exact nature of the device.
1197 - As with tape drives, when Bacula wanted a new removable
1198 disk mounted, it would unmount the old one, and send a message
1199 to the user, who would then use "mount" as described above
1200 once he had actually inserted the disk.
1201 - Implement dump/print label to UA
1202 - Spool to disk only when the tape is full, then when a tape is hung move
1204 - bextract is sending everything to the log file ****FIXME****
1205 - Allow multiple Storage specifications (or multiple names on
1206 a single Storage specification) in the Job record. Thus a job
1207 can be backed up to a number of storage devices.
1208 - Implement some way for the File daemon to contact the Director
1209 to start a job or pass its DHCP obtained IP number.
1210 - Implement a query tape prompt/replace feature for a console
1211 - Copy console @ code to gnome2-console
1212 - Make tree walk routines like cd, ls, ... more user friendly
1213 by handling spaces better.
1214 - Make sure that Bacula rechecks the tape after the 20 min wait.
1215 - Set IO_NOWAIT on Bacula TCP/IP packets.
1216 - Try doing a raw partition backup and restore by mounting a
1218 - From Lars Kellers:
1219 Yes, it would allow to highly automatic the request for new tapes. If a
1220 tape is empty, bacula reads the barcodes (native or simulated), and if
1221 an unused tape is found, it runs the label command with all the
1222 necessary parameters.
1224 By the way can bacula automatically "move" an empty/purged volume say
1225 in the "short" pool to the "long" pool if this pool runs out of volume
1227 - What to do about "list files job=xxx".
1228 - Look at how fuser works and /proc/PID/fd that is how Nic found the
1229 file descriptor leak in Bacula.
1230 - Implement WrapCounters in Counters.
1231 - Add heartbeat from FD to SD if hb interval expires.
1232 - Can we dynamically change FileSets?
1233 - If pool specified to label command and Label Format is specified,
1234 automatically generate the Volume name.
1235 - Why can't SQL do the filename sort for restore?
1236 - Add ExhautiveRestoreSearch
1237 - Look at the possibility of loading only the necessary
1238 data into the restore tree (i.e. do it one directory at a
1239 time as the user walks through the tree).
1240 - Possibly use the hash code if the user selects all for a restore command.
1241 - Fix "restore all" to bypass building the tree.
1242 - Prohibit backing up archive device (findlib/find_one.c:128)
1243 - Implement Release Device in the Job resource to unmount a drive.
1244 - Implement Acquire Device in the Job resource to mount a drive,
1245 be sure this works with admin jobs so that the user can get
1246 prompted to insert the correct tape. Possibly some way to say to
1247 run the job but don't save the files.
1248 - Make things like list where a file is saved case independent for
1250 - Use autochanger to handle multiple devices.
1251 - Implement a Recycle command
1252 - Start working on Base jobs.
1253 - Implement UnsavedFiles DB record.
1254 - From Phil Stracchino:
1255 It would probably be a per-client option, and would be called
1256 something like, say, "Automatically purge obsoleted jobs". What it
1257 would do is, when you successfully complete a Differential backup of a
1258 client, it would automatically purge all Incremental backups for that
1259 client that are rendered redundant by that Differential. Likewise,
1260 when a Full backup on a client completed, it would automatically purge
1261 all Differential and Incremental jobs obsoleted by that Full backup.
1262 This would let people minimize the number of tapes they're keeping on
1263 hand without having to master the art of retention times.
1264 - When doing a Backup send all attributes back to the Director, who
1265 would then figure out what files have been deleted.
1266 - Currently in mount.c:236 the SD simply creates a Volume. It should have
1267 explicit permission to do so. It should also mark the tape in error
1268 if there is an error.
1269 - Cancel waiting for Client connect in SD if FD goes away.
1271 - Implement timeout in response() when it should come quickly.
1272 - Implement a Slot priority (loaded/not loaded).
1273 - Implement "vacation" Incremental only saves.
1274 - Implement create "FileSet"?
1275 - Add prefixlinks to where or not where absolute links to FD.
1276 - Issue message to mount a new tape before the rewind.
1277 - Simplified client job initiation for portables.
1278 - If SD cannot open a drive, make it periodically retry.
1279 - Add more of the config info to the tape label.
1281 - Refine SD waiting output:
1282 Device is being positioned
1283 > Device is being positioned for append
1284 > Device is being positioned to file x
1286 - Figure out some way to estimate output size and to avoid splitting
1287 a backup across two Volumes -- this could be useful for writing CDROMs
1288 where you really prefer not to have it split -- not serious.
1289 - Have SD compute MD5 or SHA1 and compare to what FD computes.
1290 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
1291 actual data on the Volume and compare it.
1292 - Implement Bacula plugins -- design API
1293 - Make bcopy read through bad tape records.
1294 - Program files (i.e. execute a program to read/write files).
1295 Pass read date of last backup, size of file last time.
1296 - Add Signature type to File DB record.
1297 - CD into subdirectory when open()ing files for backup to
1298 speed up things. Test with testfind().
1299 - Priority job to go to top of list.
1300 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
1301 - Implement some way for the Console to dynamically create a job.
1302 - Solaris -I on tar for include list
1303 - Need a verbose mode in restore, perhaps to bsr.
1304 - bscan without -v is too quiet -- perhaps show jobs.
1305 - Add code to reject whole blocks if not wanted on restore.
1306 - Check if we can increase Bacula FD priorty in Win2000
1307 - Make sure the MaxVolFiles is fully implemented in SD
1308 - Check if both CatalogFiles and UseCatalog are set to SD.
1309 - Possibly add email to Watchdog if drive is unmounted too
1310 long and a job is waiting on the drive.
1311 - After unmount, if restore job started, ask to mount.
1312 - Add UA rc and history files.
1313 - put termcap (used by console) in ./configure and
1314 allow -with-termcap-dir.
1315 - Fix Autoprune for Volumes to respect need for full save.
1316 - Compare tape to Client files (attributes, or attributes and data)
1317 - Make all database Ids 64 bit.
1318 - Allow console commands to detach or run in background.
1319 - Add SD message variables to control operator wait time
1320 - Maximum Operator Wait
1321 - Minimum Message Interval
1322 - Maximum Message Interval
1323 - Send Operator message when cannot read tape label.
1324 - Verify level=Volume (scan only), level=Data (compare of data to file).
1325 Verify level=Catalog, level=InitCatalog
1327 - Add keyword search to show command in Console.
1328 - Events : tape has more than xxx bytes.
1329 - Complete code in Bacula Resources -- this will permit
1330 reading a new config file at any time.
1331 - Handle ctl-c in Console
1332 - Implement script driven addition of File daemon to config files.
1333 - Think about how to make Bacula work better with File (non-tape) archives.
1334 - Write Unix emulator for Windows.
1335 - Put memory utilization in Status output of each daemon
1336 if full status requested or if some level of debug on.
1337 - Make database type selectable by .conf files i.e. at runtime
1338 - Set flag for uname -a. Add to Volume label.
1339 - Restore files modified after date
1340 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
1341 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
1342 - Timout a job or terminate if link goes down, or reopen link and query.
1343 - Concept of precious tapes (cannot be reused).
1344 - Make bcopy copy with a single tape drive.
1345 - Permit changing ownership during restore.
1348 > My suggestion: Add a feature on the systray menu-icon menu to request
1349 > an immediate backup now. This would be useful for laptop users who may
1350 > not be on the network when the regular scheduled backup is run.
1352 > My wife's suggestion: Add a setting to the win32 client to allow it to
1353 > shut down the machine after backup is complete (after, of course,
1354 > displaying a "System will shut down in one minute, click here to cancel"
1355 > warning dialog). This would be useful for sites that want user
1356 > woorkstations to be shut down overnight to save power.
1359 - Autolabel should be specified by DIR instead of SD.
1361 - Add media capacity
1362 - AutoScan (check checksum of tape)
1363 - Format command = "format /dev/nst0"
1367 - Seek resolution (usually corresponds to buffer size)
1368 - EODErrorCode=ENOSPC or code
1369 - Partial Read error code
1370 - Partial write error code
1371 - Nonformatted read error
1372 - Nonformatted write error
1373 - WriteProtected error
1377 - IgnoreCloseErrors=yes
1387 - FD sends unsaved file list to Director at end of job (see
1389 - File daemon should build list of files skipped, and then
1390 at end of save retry and report any errors.
1391 - Write a Storage daemon that uses pipes and
1392 standard Unix programs to write to the tape.
1394 - Need something that monitors the JCR queue and
1395 times out jobs by asking the deamons where they are.
1396 - Enhance Jmsg code to permit buffering and saving to disk.
1397 - device driver = "xxxx" for drives.
1398 - Verify from Volume
1399 - Ensure that /dev/null works
1400 - Need report class for messages. Perhaps
1401 report resource where report=group of messages
1402 - enhance scan_attrib and rename scan_jobtype, and
1403 fill in code for "since" option
1404 - Director needs a time after which the report status is sent
1405 anyway -- or better yet, a retry time for the job.
1406 - Don't reschedule a job if previous incarnation is still running.
1407 - Some way to automatically backup everything is needed????
1408 - Need a structure for pending actions:
1410 - termination status (part of buffered msgs?)
1412 Read, Write, Clean, Delete
1413 - Login to Bacula; Bacula users with different permissions:
1414 owner, group, user, quotas
1415 - Store info on each file system type (probably in the job header on tape.
1416 This could be the output of df; or perhaps some sort of /etc/mtab record.
1418 ========= ideas ===============
1419 From: "Jerry K. Schieffer" <jerry@skylinetechnology.com>
1420 To: <kern@sibbald.com>
1421 Subject: RE: [Bacula-users] future large programming jobs
1422 Date: Thu, 26 Feb 2004 11:34:54 -0600
1424 I noticed the subject thread and thought I would offer the following
1425 merely as sources of ideas, i.e. something to think about, not even as
1426 strong as a request. In my former life (before retiring) I often
1427 dealt with backups and storage management issues/products as a
1428 developer and as a consultant. I am currently migrating my personal
1429 network from amanda to bacula specifically because of the ability to
1430 cross media boundaries during storing backups.
1431 Are you familiar with the commercial product called ADSM (I think IBM
1432 now sells it under the Tivoli label)? It has a couple of interesting
1433 ideas that may apply to the following topics.
1435 1. Migration: Consider that when you need to restore a system, there
1436 may be pressure to hurry. If all the information for a single client
1437 can eventually end up on the same media (and in chronological order),
1438 the restore is facillitated by not having to search past information
1439 from other clients. ADSM has the concept of "client affinity" that
1440 may be associated with it's storage pools. It seems to me that this
1441 concept (as an optional feature) might fit in your architecture for
1444 ADSM also has the concept of defining one or more storage pools as
1445 "copy pools" (almost mirrors, but only in the sense of contents).
1446 These pools provide the ability to have duplicte data stored both
1447 onsite and offsite. The copy process can be scheduled to be handled
1448 by their storage manager during periods when there is no backup
1449 activity. Again, the migration process might be a place to consider
1450 implementing something like this.
1453 > It strikes me that it would be very nice to be able to do things
1455 > have the Job(s) backing up the machines run, and once they have all
1456 > completed, start a migration job to copy the data from disks Volumes
1458 > a tape library and then to offsite storage. Maybe this can already
1460 > done with some careful scheduling and Job prioritzation; the events
1461 > mechanism described below would probably make it very easy.
1463 This is the goal. In the first step (before events), you simply
1465 the Migration to tape later.
1467 2. Base jobs: In ADSM, each copy of each stored file is tracked in
1468 the database. Once a file (unique by path and metadata such as dates,
1469 size, ownership, etc.) is in a copy pool, no more copies are made. In
1470 other words, when you start ADSM, it begins like your concept of a
1471 base job. After that it is in the "incremental" mode. You can
1472 configure the number of "generations" of files to be retained, plus a
1473 retention date after which even old generations are purged. The
1474 database tracks the contents of media and projects the percentage of
1475 each volume that is valid. When the valid content of a volume drops
1476 below a configured percentage, the valid data are migrated to another
1477 volume and the old volume is marked as empty. Note, this requires
1478 ADSM to have an idea of the contents of a client, i.e. marking the
1479 database when an existing file was deleted, but this would solve your
1480 issue of restoring a client without restoring deleted files.
1482 This is pretty far from what bacula now does, but if you are going to
1483 rip things up for Base jobs,.....
1484 Also, the benefits of this are huge for very large shops, especially
1485 with media robots, but are a pain for shops with manual media
1489 > Base jobs sound pretty useful, but I'm not dying for them.
1491 Nobody is dying for them, but when you see what it does, you will die
1494 3. Restoring deleted files: Since I think my comments in (2) above
1495 have low probability of implementation, I'll also suggest that you
1496 could approach the issue of deleted files by a mechanism of having the
1497 fd report to the dir, a list of all files on the client for every
1498 backup job. The dir could note in the database entry for each file
1499 the date that the file was seen. Then if a restore as of date X takes
1500 place, only files that exist from before X until after X would be
1501 restored. Probably the major cost here is the extra date container in
1502 each row of the files table.
1504 Thanks for "listening". I hope some of this helps. If you want to
1505 contact me, please send me an email - I read some but not all of the
1506 mailing list traffic and might miss a reply there.
1508 Please accept my compliments for bacula. It is doing a great job for
1509 me!! I sympathize with you in the need to wrestle with excelence in
1510 execution vs. excelence in feature inclusion.
1515 ==============================
1518 - Design at hierarchial storage for Bacula. Migration and Clone.
1519 - Implement FSM (File System Modules).
1520 - Audit M_ error codes to ensure they are correct and consistent.
1521 - Add variable break characters to lex analyzer.
1522 Either a bit mask or a string of chars so that
1523 the caller can change the break characters.
1524 - Make a single T_BREAK to replace T_COMMA, etc.
1525 - Ensure that File daemon and Storage daemon can
1526 continue a save if the Director goes down (this
1527 is NOT currently the case). Must detect socket error,
1528 buffer messages for later.
1529 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
1530 - Add ability to backup to two Storage devices (two SD sessions) at
1531 the same time -- e.g. onsite, offsite.
1532 - Add the ability to consolidate old backup sets (basically do a restore
1533 to tape and appropriately update the catalog). Compress Volume sets.
1534 Might need to spool via file is only one drive is available.
1535 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
1536 someway to do so with every volume that has less than x% valid
1540 Migration: Move a backup from one Volume to another
1541 Clone: Copy a backup -- two Volumes
1544 ======================================================
1546 It is somewhat like a Full save becomes an incremental since
1547 the Base job (or jobs) plus other non-base files.
1549 - A Base backup is same as Full backup, just different type.
1550 - New BaseFiles table that contains:
1552 BaseJobId - Base JobId referenced for this FileId (needed ???)
1553 JobId - JobId currently running
1554 FileId - File not backed up, exists in Base Job
1555 FileIndex - FileIndex from Base Job.
1556 i.e. for each base file that exists but is not saved because
1557 it has not changed, the File daemon sends the JobId, BaseId,
1558 FileId, FileIndex back to the Director who creates the DB entry.
1559 - To initiate a Base save, the Director sends the FD
1560 the FileId, and full filename for each file in the Base.
1561 - When the FD finds a Base file, he requests the Director to
1562 send him the full File entry (stat packet plus MD5), or
1563 conversely, the FD sends it to the Director and the Director
1564 says yes or no. This can be quite rapid if the FileId is kept
1565 by the FD for each Base Filename.
1566 - It is probably better to have the comparison done by the FD
1567 despite the fact that the File entry must be sent across the
1569 - An alternative would be to send the FD the whole File entry
1570 from the start. The disadvantage is that it requires a lot of
1571 space. The advantage is that it requires less communications
1573 - The Job record must be updated to indicate that one or more
1575 - At end of Job, FD returns:
1576 1. Count of base files/bytes not written to tape (i.e. matches)
1577 2. Count of base file that were saved i.e. had changed.
1578 - No tape record would be written for a Base file that matches, in the
1579 same way that no tape record is written for Incremental jobs where
1580 the file is not saved because it is unchanged.
1581 - On a restore, all the Base file records must explicitly be
1582 found from the BaseFile tape. I.e. for each Full save that is marked
1583 to have one or more Base Jobs, search the BaseFile for all occurrences
1585 - An optimization might be to make the BaseFile have:
1591 This would avoid the need to explicitly fetch each File record for
1592 the Base job. The Base Job record will be fetched to get the
1593 VolSessionId and VolSessionTime.
1594 =========================================================
1597 ==========================================================
1599 For each Incremental job that is run, there may be files that
1600 were found but not saved because they were locked (this applies
1601 only to Windows). Such a system could send back to the Director
1602 a list of Unsaved files.
1604 - New UnSavedFiles table that contains:
1608 - Then in the next Incremental job, the list of Unsaved Files will be
1609 feed to the FD, who will ensure that they are explicitly chosen even
1610 if standard date/time check would not have selected them.
1611 =============================================================
1615 Multiple drive autochanger data: see Alan Brown
1616 mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
1617 Unloading Data Transfer Element into Storage Element 1...source Element
1618 Address 480 is Empty
1620 (drive 0 was empty and so was slot 1)
1621 > mtx -f xxx load 15 0
1622 no response, just returns to the command prompt when complete.
1623 > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
1624 Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
1625 Data Transfer Element 1:Empty
1626 Storage Element 1:Empty
1627 Storage Element 2:Full :VolumeTag=HX002
1628 Storage Element 3:Full :VolumeTag=HX003
1629 Storage Element 4:Full :VolumeTag=HX004
1630 Storage Element 5:Full :VolumeTag=HX005
1631 Storage Element 6:Full :VolumeTag=HX006
1632 Storage Element 7:Full :VolumeTag=HX007
1633 Storage Element 8:Full :VolumeTag=HX008
1634 Storage Element 9:Full :VolumeTag=HX009
1635 Storage Element 10:Full :VolumeTag=HX010
1636 Storage Element 11:Empty
1637 Storage Element 12:Empty
1638 Storage Element 13:Empty
1639 Storage Element 14:Empty
1640 Storage Element 15:Empty
1641 Storage Element 16:Empty....
1642 Storage Element 28:Empty
1643 Storage Element 29:Full :VolumeTag=CLNU01L1
1644 Storage Element 30:Empty....
1645 Storage Element 57:Empty
1646 Storage Element 58:Full :VolumeTag=NEX261L2
1647 Storage Element 59 IMPORT/EXPORT:Empty
1648 Storage Element 60 IMPORT/EXPORT:Empty
1650 Unloading Data Transfer Element into Storage Element 15...done
1652 (just to verify it remembers where it came from, however it can be
1653 overrriden with mtx unload {slotnumber} to go to any storage slot.)
1655 There needs to be a table of drive # to devices somewhere - If there are
1656 multiple changers or drives there may not be a 1:1 correspondance between
1657 changer drive number and system device name - and depending on the way the
1658 drives are hooked up to scsi busses, they may not be linearly numbered
1659 from an offset point either.something like
1661 Autochanger drives = 2
1662 Autochanger drive 0 = /dev/nst1
1663 Autochanger drive 1 = /dev/nst2
1664 IMHO, it would be _safest_ to use explicit mtx unload commands at all
1665 times, not just for multidrive changers. For a 1 drive changer, that's
1671 MTX's manpage (1.2.15):
1672 unload [<slotnum>] [ <drivenum> ]
1673 Unloads media from drive <drivenum> into slot
1674 <slotnum>. If <drivenum> is omitted, defaults to
1675 drive 0 (as do all commands). If <slotnum> is
1676 omitted, defaults to the slot that the drive was
1677 loaded from. Note that there's currently no way
1678 to say 'unload drive 1's media to the slot it
1679 came from', other than to explicitly use that
1680 slot number as the destination.AB
1686 undef# camcontrol devlist
1687 <WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
1688 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
1689 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
1691 tapeinfo -f /dev/sg0 with a bad tape in drive 1:
1692 [kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
1693 Product Type: Tape Drive
1695 Product ID: 'C5713A '
1697 Attached Changer: No
1698 TapeAlert[3]: Hard Error: Uncorrectable read/write error.
1699 TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
1706 Medium Type: Not Loaded
1709 DataCompEnabled: yes
1710 DataCompCapable: yes
1711 DataDeCompEnabled: yes
1718 Handling removable disks
1720 From: Karl Cunningham <karlc@keckec.com>
1722 My backups are only to hard disk these days, in removable bays. This is my
1723 idea of how a backup to hard disk would work more smoothly. Some of these
1724 things Bacula does already, but I mention them for completeness. If others
1725 have better ways to do this, I'd like to hear about it.
1727 1. Accommodate several disks, rotated similar to how tapes are. Identified
1728 by partition volume ID or perhaps by the name of a subdirectory.
1729 2. Abort & notify the admin if the wrong disk is in the bay.
1730 3. Write backups to different subdirectories for each machine to be backed
1732 4. Volumes (files) get created as needed in the proper subdirectory, one
1734 5. When a disk is recycled, remove or zero all old backup files. This is
1735 important as the disk being recycled may be close to full. This may be
1736 better done manually since the backup files for many machines may be
1737 scattered in many subdirectories.
1742 - Why the heck doesn't bacula drop root priviledges before connecting to
1744 - Look at using posix_fadvise(2) for backups -- see bug #751.
1745 Possibly add the code at findlib/bfile.c:795
1746 /* TCP socket options */
1747 #define TCP_KEEPIDLE 4 /* Start keeplives after this period */
1748 - Fix bnet_connect() code to set a timer and to use time to
1750 - Implement 4th argument to make_catalog_backup that passes hostname.
1751 - Test FIFO backup/restore -- make regression
1752 - Please mount volume "xxx" on Storage device ... should also list
1753 Pool and MediaType in case user needs to create a new volume.
1754 - On restore add Restore Client, Original Client.
1755 01-Apr 00:42 rufus-dir: Start Backup JobId 55, Job=kernsave.2007-04-01_00.42.48
1756 01-Apr 00:42 rufus-sd: Python SD JobStart: JobId=55 Client=Rufus
1757 01-Apr 00:42 rufus-dir: Created new Volume "Full0001" in catalog.
1758 01-Apr 00:42 rufus-dir: Using Device "File"
1759 01-Apr 00:42 rufus-sd: kernsave.2007-04-01_00.42.48 Warning: Device "File" (/tmp) not configured to autolabel Volumes.
1760 01-Apr 00:42 rufus-sd: kernsave.2007-04-01_00.42.48 Warning: Device "File" (/tmp) not configured to autolabel Volumes.
1761 01-Apr 00:42 rufus-sd: Please mount Volume "Full0001" on Storage Device "File" (/tmp) for Job kernsave.2007-04-01_00.42.48
1762 01-Apr 00:44 rufus-sd: Wrote label to prelabeled Volume "Full0001" on device "File" (/tmp)
1763 - Check if gnome-console works with TLS.
1764 - the director seg faulted when I omitted the pool directive from a
1765 job resource. I was experimenting and thought it redundant that I had
1766 specified Pool, Full Backup Pool. and Differential Backup Pool. but
1767 apparently not. This happened when I removed the pool directive and
1768 started the director.
1769 - Add Where: client:/.... to restore job report.