4 Documentation to do: (any release a little bit at a time)
5 - Document running a test version.
6 - Document query file format.
7 - Document static linking
8 - Document problems with Verify and pruning.
9 - Document how to use multiple databases.
10 - For FreeBSD typical /dev/nrsa0 and for mtx /dev/pass1
11 - VXA drives have a "cleaning required"
12 indicator, but Exabyte recommends preventive cleaning after every 75
14 - Lookup HP cleaning recommendations.
15 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
16 - Document FInclude ...
17 - Document need to add "-u root" to most of MySQL script calls
18 (./create_mys... ./make_my...).
19 - Document c:/working directory better than /working directory.
20 - Document all the status codes JobLevel, JobType, JobStatus.
21 - Document update volume: jobid, current, before, all
23 - Document that bscan does not work with multiple simultaneous jobs.
24 - Update Automatic Volume Labeling in disk.wml
27 Testing to do: (painful)
28 - that ALL console command line options work and are always implemented
29 - blocksize recognition code.
30 - Test if rewind at end of tape waits for tape to rewind.
32 - Test not zeroing Autochanger slot when it is wrong.
33 - Test of last block is correct in JobMedia when splitting file
35 - Test recycling and purging (code changed in db_find_next_volume and
37 - Figure out how to use ssh or stunnel to protect Bacula communications.
40 - Complete (or turn off) the command line code in update.
41 - In Win portable restore the directory is not create
42 27-Jun-2003 16:52 tibs-fd: kernsrestore.2003-06-27_16.52.20 Error:
43 create_file.c:175 Could not create
44 /tmp/bacula-restores/cygwin/home/kern/bacula/k/src/dird/dird_conf.o: 0
45 ERR=The system cannot find the path specified.
46 - Finish Windows implementation (add setting of correct type on restore,
47 add Portable Data Format flag).
48 - Maybe remove multiple simultaneous devices code in SD.
49 - Increment DB version prior to releasing.
50 - Turn off FULL_DEBUG prior to releasing.
51 - On Windows with very long path names, it may be impossible to create
52 a file (and thus restore it) because the total length is too long.
53 We must cd into the directory then create the file without the
55 - Move JobFiles and JobBytes to SD rather than FD -- more correct.
56 - lstat() is not going to work on Win32 for testing date.
57 - Implement a Recycle command
58 - Something is not right in last block of fill command.
59 - Implement List Volume Job=xxx or List scheduled volumes or Status Director
60 - Check if Incremental is working correctly when it looks for the previous Job
65 - Add client name to cram-md5 challenge so Director can immediately
66 verify if it is the correct client.
67 - Implement ClientRunBeforeJob and ClientRunAfterJob.
68 - Implement new alist in FileSet scanning.
69 - Add JobLevel in FD status (but make sure it is defined).
70 - Audit all UA commands to ensure that we always prompt where possible.
71 - Restrict characters permitted in a Resource name, and don't permit
73 - Prohibit backing up archive device (findlib/find_one.c:128)
74 - Make | and < work on FD side.
75 - Check Jmsg in bnet, may not work, must dup bsock.
76 - Suppress Job Name in Jmsg for console
77 - Create Pools that are referenced in a Run statement at startup if possible.
78 - Use runbeforejob to unload, then reload a volume previously used,
79 then the next job run gets an error reading the drive.
80 - Make bootstrap filename unique.
81 - Test a second language e.g. french.
82 - Start working on Base jobs.
83 - Make "make binary-release" work from any directory.
84 - Unsaved Flag in Job record (use JobMissingFiles).
85 - Base Flag in Job record.
86 - Implement UnsavedFiles DB record.
87 - Implement argc/argv for daemon command line scanning using table driven
89 - Implement table driven single argc/argv scanner to pickup all arguments.
90 Much like xxx_conf.c scan table.
91 keyword, handler(store_routine), store_address, code, flags, default.
92 - From Phil Stracchino:
93 It would probably be a per-client option, and would be called
94 something like, say, "Automatically purge obsoleted jobs". What it
95 would do is, when you successfully complete a Differential backup of a
96 client, it would automatically purge all Incremental backups for that
97 client that are rendered redundant by that Differential. Likewise,
98 when a Full backup on a client completed, it would automatically purge
99 all Differential and Incremental jobs obsoleted by that Full backup.
100 This would let people minimize the number of tapes they're keeping on
101 hand without having to master the art of retention times.
102 - Implement new serialize subroutines
103 send(socket, "string", &Vol, "uint32", &i, NULL)
104 - Scratch Pool where the volumes can be re-assigned to any Pool.
105 - Implement a M_SECURITY message class.
106 - Implement forward spacing block/file: position_device(bsr) --
107 just before read_block_from_device();
108 - When doing a Backup send all attributes back to the Director, who
109 would then figure out what files have been deleted.
110 - Currently in mount.c:236 the SD simply creates a Volume. It should have
111 explicit permission to do so. It should also mark the tape in error
112 if there is an error.
113 - Make sure all restore counters are working correctly in the FD.
114 - SD Bytes Read is wrong.
115 - Configure mtx-changer to have correct path to mtx.
116 - Look at ALL higher level routines that call block.c to be sure
117 they don't expect something in errmsg.
118 - Investigate doing RAW backup of Win32 partition.
119 - Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
120 - Add thread specific data to hold the jcr -- send error messages from
121 low level routines by accessing it and using Jmsg().
122 - Cancel waiting for Client connect in SD if FD goes away.
123 - Testing Tibs job erred and hung director on Storage resource. This was
124 because there were a whole pile of jobs hanging around in the SD
125 waiting for a connection from the FD that was never coming.
126 - Possibly update all client records at startup.
128 - Add Progress command that periodically reports the progress of
130 - One block was orphaned in the SD probably after cancel.
131 - Add all command line arguments to "update", e.g. slot=nn volStatus=append, ...
134 - Examine Bare Metal restore problem (a FD crash exists somewhere ...).
135 - Implement timeout in response() when it should come quickly.
136 - Implement console @echo command.
137 - Implement a Slot priority (loaded/not loaded).
138 - Implement "vacation" Incremental only saves.
139 - Implement single pane restore (much like the Gftp panes).
140 - Implement Automatic Mount even in operator wait.
141 - Implement create "FileSet"?
142 - Implement Release Device in the Job resource to unmount a drive.
143 - Implement Acquire Device in the Job resource to mount a drive,
144 be sure this works with admin jobs so that the user can get
145 prompted to insert the correct tape. Possibly some way to say to
146 run the job but don't save the files.
147 - Implement all command line args on run.
148 - Implement command line "restore" args.
149 - Implement "restore current select=no"
150 - Fix watchdog pthread crash on Win32 (this is pthread_kill() Cygwin bug)
151 - Implement "scratch pool" where tapes are defined and can be
152 taken by any pool that needs them.
153 - Implement restore "current system", but take all files without
154 doing selection tree -- so that jobs without File records can
156 - Implement disk spooling. Two parts: 1. Spool to disk then
157 immediately to tape to speed up tape operations. 2. Spool to
158 disk only when the tape is full, then when a tape is hung move
160 - Implement a relocatable bacula.spec
161 - Allow multiple Storage specifications (or multiple names on
162 a single Storage specification) in the Job record. Thus a job
163 can be backed up to a number of storage devices.
164 - Implement dump/print label to UA
165 - Add prefixlinks to where or not where absolute links to FD.
166 - Issue message to mount a new tape before the rewind.
167 - Simplified client job initiation for portables.
168 - If SD cannot open a drive, make it periodically retry.
169 - Implement LabelTemplate (at least first cut).
170 - Add more of the config info to the tape label.
171 - Implement a Mount Command and an Unmount Command where
172 the users could specify a system command to be performed
173 to do the mount, after which Bacula could attempt to
174 read the device. This is for Removeable media such as a CDROM.
175 - Most likely, this mount command would be invoked explicitly
176 by the user using the current Console "mount" and "unmount"
177 commands -- the Storage Daemon would do the right thing
178 depending on the exact nature of the device.
179 - As with tape drives, when Bacula wanted a new removable
180 disk mounted, it would unmount the old one, and send a message
181 to the user, who would then use "mount" as described above
182 once he had actually inserted the disk.
184 - Make some way so that if a machine is skipped because it is not up
185 that Bacula will continue retrying for a specified period of time --
187 - If tape is marked read-only, then try opening it read-only rather than
188 failing, and remember that it cannot be written.
189 - Refine SD waiting output:
190 Device is being positioned
191 > Device is being positioned for append
192 > Device is being positioned to file x
194 - Figure out some way to estimate output size and to avoid splitting
195 a backup across two Volumes -- this could be useful for writing CDROMs
196 where you really prefer not to have it split -- not serious.
197 - Add RunBeforeJob and RunAfterJob to the Client program.
198 - Have SD compute MD5 or SHA1 and compare to what FD computes.
199 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
200 actual data on the Volume and compare it.
201 - Implement FileOptions (see end of this document)
202 - Implement Bacula plugins -- design API
203 - Make bcopy read through bad tape records.
204 - Fix read_record to handle multiple sessions.
205 - Program files (i.e. execute a program to read/write files).
206 Pass read date of last backup, size of file last time.
207 - Add Signature type to File DB record.
208 - CD into subdirectory when open()ing files for backup to
209 speed up things. Test with testfind().
210 - Priority job to go to top of list.
211 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
212 - Implement some way for the Console to dynamically create a job.
213 - Restore to a particular time -- e.g. before date, after date.
214 - Solaris -I on tar for include list
215 - Need a verbose mode in restore, perhaps to bsr.
216 - bscan without -v is too quiet -- perhaps show jobs.
217 - Add code to reject whole blocks if not wanted on restore.
218 - Check if we can increase Bacula FD priorty in Win2000
219 - Make sure the MaxVolFiles is fully implemented in SD
220 - Check if both CatalogFiles and UseCatalog are set to SD.
221 - Need return status on read_cb() from read_records(). Need multiple
222 records -- one per Job, maybe a JCR or some other structure with
223 a block and a record.
224 - Figure out how to do a bare metal Windows restore
225 - Possibly add email to Watchdog if drive is unmounted too
226 long and a job is waiting on the drive.
227 - Use read_record.c in SD code.
228 - Restore program that errors in SD due to no tape reports
229 OK incorrectly in output.
230 - After unmount, if restore job started, ask to mount.
231 - Convert all %x substitution variables, which are hard to remember
232 and read to %(variable-name). Idea from TMDA.
233 - Remove NextId for SQLite. Optimize.
234 - Move all SQL statements into a single location.
235 - Add UA rc and history files.
236 - put termcap (used by console) in ./configure and
237 allow -with-termcap-dir.
238 - Enhance time and size scanning routines.
239 - Fix Autoprune for Volumes to respect need for full save.
240 - Fix Win32 config file definition name on /install
241 - Compare tape to Client files (attributes, or attributes and data)
242 - Make all database Ids 64 bit.
243 - Write an applet for Linux.
244 - Add estimate to Console commands
245 - Implement new daemon communications protocol.
246 - Allow console commands to detach or run in background.
247 - Fix status delay on storage daemon during rewind.
248 - Add SD message variables to control operator wait time
249 - Maximum Operator Wait
250 - Minimum Message Interval
251 - Maximum Message Interval
252 - Send Operator message when cannot read tape label.
253 - Verify level=Volume (scan only), level=Data (compare of data to file).
254 Verify level=Catalog, level=InitCatalog
256 - Add keyword search to show command in Console.
257 - Events : tape has more than xxx bytes.
258 - Complete code in Bacula Resources -- this will permit
259 reading a new config file at any time.
260 - Handle ctl-c in Console
261 - Implement script driven addition of File daemon to config files.
262 - Think about how to make Bacula work better with File (non-tape) archives.
263 - Write Unix emulator for Windows.
264 - Put memory utilization in Status output of each daemon
265 if full status requested or if some level of debug on.
266 - Make database type selectable by .conf files i.e. at runtime
267 - Set flag for uname -a. Add to Volume label.
268 - Implement throttled work queue.
269 - Restore files modified after date
270 - Restore file modified before date
271 - Restore -- do nothing but show what would happen
272 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
273 - Implement Restore FileSet=
274 - Create a protocol.h and protocol.c where all protocol messages
276 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
277 - Timout a job or terminate if link goes down, or reopen link and query.
278 - Concept of precious tapes (cannot be reused).
279 - Make bcopy copy with a single tape drive.
280 - Permit changing ownership during restore.
283 > My suggestion: Add a feature on the systray menu-icon menu to request
284 > an immediate backup now. This would be useful for laptop users who may
285 > not be on the network when the regular scheduled backup is run.
287 > My wife's suggestion: Add a setting to the win32 client to allow it to
288 > shut down the machine after backup is complete (after, of course,
289 > displaying a "System will shut down in one minute, click here to cancel"
290 > warning dialog). This would be useful for sites that want user
291 > woorkstations to be shut down overnight to save power.
294 - Autolabel should be specified by DIR instead of SD.
297 - AutoScan (check checksum of tape)
298 - Format command = "format /dev/nst0"
302 - Seek resolution (usually corresponds to buffer size)
303 - EODErrorCode=ENOSPC or code
304 - Partial Read error code
305 - Partial write error code
306 - Nonformatted read error
307 - Nonformatted write error
308 - WriteProtected error
312 - IgnoreCloseErrors=yes
322 - FD sends unsaved file list to Director at end of job (see
324 - File daemon should build list of files skipped, and then
325 at end of save retry and report any errors.
326 - Write a Storage daemon that uses pipes and
327 standard Unix programs to write to the tape.
329 - Need something that monitors the JCR queue and
330 times out jobs by asking the deamons where they are.
331 - Enhance Jmsg code to permit buffering and saving to disk.
332 - device driver = "xxxx" for drives.
334 - Ensure that /dev/null works
335 - Need report class for messages. Perhaps
336 report resource where report=group of messages
337 - enhance scan_attrib and rename scan_jobtype, and
338 fill in code for "since" option
339 - Director needs a time after which the report status is sent
340 anyway -- or better yet, a retry time for the job.
341 - Don't reschedule a job if previous incarnation is still running.
342 - Some way to automatically backup everything is needed????
343 - Need a structure for pending actions:
345 - termination status (part of buffered msgs?)
347 Read, Write, Clean, Delete
348 - Login to Bacula; Bacula users with different permissions:
349 owner, group, user, quotas
350 - Store info on each file system type (probably in the job header on tape.
351 This could be the output of df; or perhaps some sort of /etc/mtab record.
354 - Design at hierarchial storage for Bacula. Migration and Clone.
355 - Implement FSM (File System Modules).
356 - Audit M_ error codes to ensure they are correct and consistent.
357 - Add variable break characters to lex analyzer.
358 Either a bit mask or a string of chars so that
359 the caller can change the break characters.
360 - Make a single T_BREAK to replace T_COMMA, etc.
361 - Ensure that File daemon and Storage daemon can
362 continue a save if the Director goes down (this
363 is NOT currently the case). Must detect socket error,
364 buffer messages for later.
365 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
366 - Add ability to backup to two Storage devices (two SD sessions) at
367 the same time -- e.g. onsite, offsite.
368 - Add the ability to consolidate old backup sets (basically do a restore
369 to tape and appropriately update the catalog). Compress Volume sets.
370 Might need to spool via file is only one drive is available.
371 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
372 someway to do so with every volume that has less than x% valid
376 Migration: Move a backup from one Volume to another
377 Clone: Copy a backup -- two Volumes
379 Bacula Migration is based on Jobs (apparently Networker is file by file).
381 Migration triggered by:
385 Highwater mark (keep total size)
389 Bacula Projects Roadmap
391 last update 8 May 2003
393 Item 1: Multiple simultaneous Jobs. (done)
394 Done -- Restore part needs better implementation to work correctly
395 Also, it needs considerable testing
397 What: Permit multiple simultaneous jobs in Bacula.
399 Why: An enterprise level solution needs to go fast without the
400 need for the system administrator to carefully tweak
401 timing. Based on the benchmarks, during a full
402 backup, NetWorker typically hit 10 times the bandwidth to
403 the tape compared to Bacula--largely. This is probably due to
404 running parallel jobs and multi-threaded filling of buffers
405 and writing them to tape. This should also make things work
406 better when you have a mix of fast and slow machines backing
409 Notes: Bacula was designed to run multiple simultaneous jobs. Thus
410 implementing this is a matter of some small cleanups and
414 Item 2: Make the Storage daemon use intermediate file storage to buffer data.
415 Deferred -- not necessary yet -- possibly implement with Migration.
417 What: If data is coming into the SD too fast, buffer it to
418 disk if the user has configured this option.
420 Why: This would be nice, especially if it more or less falls out
421 when implementing (1) above. If not, it probably should not
422 be given a high priority because fundamentally the backup time
423 is limited by the tape bandwidth. Even though you may finish a
424 client job quicker by spilling to disk, you still have to
425 eventually get it onto tape. If intermediate disk buffering
426 allows us to improve write bandwidth to tape, it may make
429 Notes: Whether or not this is implemented will depend upon performance
430 testing after item 1 is implemented.
433 Item 3: Write the bscan program -- also write a bcopy program.
436 What: Write a program that reads a Bacula tape and puts all the
437 appropriate data into the catalog. This allows recovery
438 from a tape that is no longer in the database, or it allows
439 re-creation of a database if lost.
441 Why: This is a fundamental robustness and disaster recovery tool
442 which will increase the comfort level of a sysadmin
443 considering adopting Bacula.
445 Notes: A skeleton of this program already exists, but much work
446 needs to be done. Implementing this will also make apparent
447 any deficiencies in the current Bacula tape format.
450 Item 4: Implement Base jobs.
452 What: A base job is sort of like a Full save except that you
453 will want the FileSet to contain only files that are unlikely
454 to change in the future (i.e. a snapshot of most of your
455 system after installing it). After the base job has been run,
456 when you are doing a Full save, you can specify to exclude
457 all files saved by the base job that have not been modified.
459 Why: This is something none of the competition does, as far as we know
460 (except BackupPC, which is a Perl program that saves to disk
461 only). It is big win for the user, it makes Bacula stand out
462 as offering a unique optimization that immediately saves time
465 Notes: Big savings in tape usage. Will require more resources because
466 the e. DIR must send FD a list of files/attribs, and the FD must
467 search the list and compare it for each file to be saved.
470 Item 5: Implement Label templates
473 What: This is a mechanism whereby Bacula can automatically create
474 a tape label for new tapes according to a detailed specification
475 provided by the user.
477 Why: It is a major convenience item for folks who use automated label
480 Notes: Bacula already has a working form of automatic tape label
481 creation, but it is very crude. The design for the complete
482 tape labeling project is already documented in the manual.
485 Item 6: Write a regression script.
486 Done -- Continue to expand its testing.
488 What: This is an automatic script that runs and tests as many features
489 of Bacula as possible. The output is compared to previous
490 versions of Bacula and any differences are reported.
492 Why: This is an enormous help in preventing introduction of new
493 errors in parts of the program that already work correctly.
495 Notes: This probably should be ranked higher, it's something the typical
496 user doesn't see. Depending on how it's implemented, it may
497 make sense to defer it until the archival tape format and
498 user interface mature.
501 Item 7: GUI for interactive restore
502 Item 8: GUI for interactive backup
504 What: The current interactive restore is implemented with a tty
505 interface. It would be much nicer to be able to "see" the
506 list of files backed up in typical GUI tree format.
507 The same mechanism could also be used for creating
508 ad-hoc backup FileSets (item 8).
510 Why: Ease of use -- especially for the end user.
512 Notes: Rather than implementing in Gtk, we probably should go directly
513 for a Browser implementation, even if doing so meant the
514 capability wouldn't be available until much later. Not only
515 is there the question of Windows sites, most
516 Solaris/HP/IRIX, etc, shops can't currently run Gtk programs
517 without installing lots of stuff admins are very wary about.
518 Real sysadmins will always use the command line anyway, and
519 the user who's doing an interactive restore or backup of his
520 own files will in most cases be on a Windows machine running
524 Item 9: Add SSL to daemon communications.
526 What: This provides for secure communications between the daemons.
528 Why: This would allow doing backup across the Internet without
529 privacy concerns (or with much less concern).
531 Notes: The vast majority of near term potential users will be backing up
532 a single site over a LAN and, correctly or not, they probably
533 won't be concerned with security, at least not enough to go to
534 the trouble to set up keys, etc. to screw things down. We suspect
535 that many users genuinely interested in multi-site backup
536 already run some form of VPN software in their internetwork
537 connections, and are willing to delegate security to that layer.
540 Item 10: Define definitive tape format.
543 What: Define that definitive tape format that will not change
544 for the next millennium.
546 Why: Stability, security.
548 Notes: See notes for item 11 below.
551 Item 11: New daemon communication protocol.
553 What: The current daemon to daemon protocol is basically an ASCII
554 printf() and sending the buffer. On the receiving end, the
555 buffer is sscanf()ed to unpack it. The new scheme would
556 be a binary format that allows quick packing and unpacking
557 of any data type with named fields.
559 Why: Using binary packing would be faster. Named fields will permit
560 error checking to ensure that what is sent is what the
561 receiver really wants.
563 Notes: These are internal improvements in the interest of the
564 long-term stability and evolution of the program. On the one
565 hand, the sooner they're done, the less code we have to rip
566 up when the time comes to install them. On the other hand, they
567 don't bring an immediately perceptible benefit to potential
568 users. Item 10 and possibly item 11 should be deferred until Bacula
569 is well established with a growing user community more or
570 less happy with the feature set. At that time, it will make a
571 good "next generation" upgrade in the interest of data
577 ======================================================
579 It is somewhat like a Full save becomes an incremental since
580 the Base job (or jobs) plus other non-base files.
582 - New BaseFile table that contains:
583 JobId, BaseJobId, FileId (from Base).
584 i.e. for each base file that exists but is not saved because
585 it has not changed, the File daemon sends the JobId, BaseId,
586 and FileId back to the Director who creates the DB entry.
587 - To initiate a Base save, the Director sends the FD
588 the FileId, and full filename for each file in the Base.
589 - When the FD finds a Base file, he requests the Director to
590 send him the full File entry (stat packet plus MD5), or
591 conversely, the FD sends it to the Director and the Director
592 says yes or no. This can be quite rapid if the FileId is kept
593 by the FD for each Base Filename.
594 - It is probably better to have the comparison done by the FD
595 despite the fact that the File entry must be sent across the
597 - An alternative would be to send the FD the whole File entry
598 from the start. The disadvantage is that it requires a lot of
599 space. The advantage is that it requires less communications
601 - The Job record must be updated to indicate that one or more
603 - At end of Job, FD returns:
604 1. Count of base files/bytes not written to tape (i.e. matches)
605 2. Count of base file that were saved i.e. had changed.
606 - No tape record would be written for a Base file that matches, in the
607 same way that no tape record is written for Incremental jobs where
608 the file is not saved because it is unchanged.
609 - On a restore, all the Base file records must explicitly be
610 found from the BaseFile tape. I.e. for each Full save that is marked
611 to have one or more Base Jobs, search the BaseFile for all occurrences
613 - An optimization might be to make the BaseFile have:
619 This would avoid the need to explicitly fetch each File record for
620 the Base job. The Base Job record will be fetched to get the
621 VolSessionId and VolSessionTime.
622 =========================================================
626 =============================================================
628 Request For Comments For File Backup Options
631 Subject: File Backup Options
634 A few days ago, a Bacula user who is backing up to file volumes and
635 using compression asked if it was possible to suppress compressing
636 all .gz files since it was a waste of CPU time. Although Bacula
637 currently permits using different options (compression, ...) on
638 a directory by directory basis, it cannot do it on a file by
639 file basis, which is clearly what was desired.
641 Proposed Implementation:
642 To solve this problem, I propose the following:
644 - Add a new Director resource type called FileOptions.
646 - The FileOptions resource will have records for all
647 options that can currently be specified on the Include record
648 (in a FileSet). Examples below.
650 - The FileOptions resource will permit an exclude option as well
651 as a number of additional options.
653 - The heart of the FileOptions resource is the ability to
654 supply any number of ApplyTo records which specify POSIX
655 regular expressions. These ApplyTo regular expressions are
656 applied to the fully qualified filename (path and all). If
657 one matches, then the FileOptions will be used.
659 - When an ApplyTo specification matches an included file, the
660 options specified in the FileOptions resource will override
661 the default options specified on the Include record.
663 - Include records will be modified to permit referencing one or
664 more FileOptions resources. The FileOptions will be used
665 in the order listed on the Include record and the first
666 one that matches will be applied.
668 - Options (or specifications) currently supplied on the Include
669 record will be deprecated (i.e. removed in a later version a
670 year or so from now).
672 - The Exclude record will be deprecated as the same functionality
673 can be obtained by using an Exclude = yes in the FileOptions.
676 The following records can appear in the FileOptions resource. An
677 asterisk preceding the name indicates a feature not currently
681 - Compression= (GZIP, ...)
682 - Signature= (MD5, SHA1, ...)
684 - OneFs= (yes/no) - remain on one filesystem
685 - Recurse= (yes/no) - recurse into subdirectories
686 - Sparse= (yes/no) - do sparse file backup
687 - *Exclude= (yes/no) - exclude file from being saved
688 - *Reader= (filename) - external read (backup) program
689 - *Plugin= (filename) - read/write plugin module
692 - verify= (ipnougsamc5) - verify options
695 - replace= (always/ifnewer/ifolder/never) - replace options currently
697 - *Writer= (filename) - external write (restore) program
701 Currently options specifying compression, MD5 signatures, recursion,
702 ... of a FileSet are supplied on the Include record. These will now
703 all be collected into a FileOptions resource, which will be
704 specified on the Include in place of the options. Multiple FileOptions
705 may be specified. Since the FileOptions contain regular expressions
706 that are applied to the full filename, this will give the ability
707 to specify backup options on a file by file basis to whatever level
716 Include = compression=GZIP signature=MD5 {
725 Include = FileOptions=Opts {
736 That's a lot more to do the same thing, but it gives the ability to
737 apply options on a file by file basis. For example, suppose you
738 want to compress all files but not any file with extensions .gz or .Z.
739 You could do so as follows:
743 Include = FileOptions=NoCompress FileOptions=Opts {
751 ApplyTo = /*.?*/ # matches all files
756 # Note multiple ApplyTos are ORed
757 ApplyTo = /*.gz/ # matches .gz files */
758 ApplyTo = /*.Z/ # matches .Z files */
761 Now, since the NoCompress FileOptions is specified first on the
762 Include line, any *.gz or *.Z file will have an MD5 signature computed,
763 but will not be compressed. For all other files, the NoCompress will not
764 match, so the Opts options will be used which will include GZIP
768 - Is it necessary to provide some means of ANDing regular expressions
769 and negation? (not currently planned)
771 e.g. ApplyTo = /*.gz/ && !/big.gz/
773 - I see that Networker has a "null" module which, if specified, does not
774 backup the file, but does make an record of the file in the catalog
775 so that the catalog will reflect an exact picture of the filesystem.
776 The result is that the file can be "seen" when "browsing" the save
777 sets, but it cannot be restored.
779 Is this really useful? Should it be implemented in Bacula?
782 After implementing the above, the user will be able to specify
783 on a file by file basis (using regular expressions) what options are
784 applied for the backup.
787 =============================================
789 ==========================================================
791 For each Incremental job that is run, there may be files that
792 were found but not saved because they were locked (this applies
793 only to Windows). Such a system could send back to the Director
794 a list of Unsaved files.
796 - New UnSavedFiles table that contains:
800 - Then in the next Incremental job, the list of Unsaved Files will be
801 feed to the FD, who will ensure that they are explicitly chosen even
802 if standard date/time check would not have selected them.
803 =============================================================
806 Done: (see kernsdone for more)
807 - Heartbeat between daemons.
808 - Fix Dir heartbeat in restore and verify vol. Be sure to make
809 bnet_recv() ignore BNET_HEARTBEAT.
810 - Implement HEART_BEAT while SD waiting for tapes.
811 - Include RunBeforeJob and RunAfterJob output in the message
813 - Change M_INFO to M_RESTORED for all restored files.
814 - Fix command prompt in gnome-console by checking on Ready.
815 - Merge SQLite, MySQL, and Rel spec into a single file.
816 - Fix config of "console"
817 - Check if cancel works with FD (fixed).
818 - Properly configure console and gconsole (currently for source not
819 configured for installation).
820 - Error labeling tape from console gets Jmsg error because of no Job.
821 - Test and implement get_pint and get_yesno.
822 - Implement global with DB name and add to btraceback.gdb
823 - Remove subsysdir from conf files (used only in autostart scripts).
825 rufus-dir: Max configured use duration exceeded. Marking Volume "MatouBackup" as Used.
826 rufus-sd: Volume "" previously written, moving to end of data.
827 rufus-sd: Matou.2003-05-10_10.39.18 Error: I canot write on this volume because:
828 The number of files mismatch! Volume=1 Catalog=0
829 rufus-sd: Matou.2003-05-10_10.39.18 Error: askdir.c:155 NULL Volume name. This shouldn't happen!!!
830 - Shell character expansion is failing occassionally.
831 - Add a section to the doc on Manual cycling of Volumes.
832 - Check if Job/File retentions apply to multivolume jobs.
833 - Fix missing casette in autoloader during read:
834 14-May-2003 14:41 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0010
835 14-May-2003 14:41 undef-sd: 3301 Issuing autochanger "loaded" command.
836 14-May-2003 14:41 undef-sd: 3302 Issuing autochanger "unload" command.
837 14-May-2003 14:42 undef-sd: 3303 Issuing autochanger "load slot 1" command.
838 14-May-2003 14:42 undef-sd: 3304 Autochanger "load slot 1" status is OK.
839 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
840 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
841 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
842 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
843 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
844 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
845 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Warning: acquire.c:106 Volume name mismatch. Wanted TestVolume0005 got TestVolume0009
846 14-May-2003 14:42 undef-sd: 3301 Issuing autochanger "loaded" command.
847 14-May-2003 14:42 undef-sd: RestoreFiles.2003-05-14_14.41.00 Fatal error: acquire.c:129 Too many errors trying to mount device "/dev/nrsa0".
848 14-May-2003 14:42 undef-dir: Bacula 1.31 (12May03): 14-May-2003 14:42
849 - Fix problem reported by Christopher McCurdy <cmccurdy@eecis.udel.edu>
850 xeon-fd: Could not stat c:/Documents and Settings/All
851 Users/Application Data/Humc:\Documents and Settings\All User98_AIX.kbf:
852 ERR=No such file or directory
854 - The following Re-read last block at EOT failed. ERR=block.c:523 Read zero bytes on device /dev/nrsa0.
855 undef-sd: block.c:523 Read zero bytes on device /dev/nrsa0.
856 apparently masks the standard EOM message.
857 - BSD (probably) does not have strtoll()
858 - BSD does not have ioctl() MTEOM
859 - BSD defines a number of MT_xxx variables which conflict
860 with those defined by Bacula.
861 - Make default duration days if no qualifier (e.g. s) is specified.
862 - BSDI fix finding gcc version
863 - When the FD errs (e.g. disk full) have a more graceful shutdown.
864 - Make sure Bacula prunes/purges canceled and failed jobs too and all
865 jobs with zero JobFiles.
866 - Implement Volume name checking.
867 - Document what characters can go into Volume names.
868 - Getting the following on all directories on Win32
869 19-May-2003 01:14 tibs-fd: Could not access c:/cygwin/home/kern/rxvt: ERR=Permission denied
870 - Cancellation caused JobMedia error:
871 babylon5-dir: Last FULL backup time not found. Doing FULL backup.
872 babylon5-dir: Start Backup JobId 416, Job=Zocalo_Save.2003-05-19_02.15.06
873 babylon5-sd: End of media on Volume VXA-V17-Inc-001 Bytes=31,982,900,672 Blocks=495,781.
874 babylon5-sd: Job Zocalo_Save.2003-05-19_02.15.06 waiting. Cannot find any appendable volumes.
875 babylon5-sd: Someone woke me up, but I cannot find any appendable volumes
876 for Job=Zocalo_Save.2003-05-19_02.15.06.
877 babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Fatal error: Job
878 Zocalo_Save.2003-05-19_02.15.06 canceled while waiting for mount on
879 Storage Device "Ecrix_VXA-1".
880 babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Fatal error: Cannot fixup device
881 error. Job Zocalo_Save.2003-05-19_02.15.06 canceled while waiting for
882 mount on Storage Device "Ecrix_VXA-1".
884 babylon5-dir: Zocalo_Save.2003-05-19_02.15.06 Error: Catalog error creating
885 JobMedia record. sql_create.c:125 Create JobMedia failed. Record already
887 babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Error: Error creating JobMedia
888 record: 1991 Update JobMedia error
890 babylon5-sd: Zocalo_Save.2003-05-19_02.15.06 Error: askdir.c:158 NULL Volume
891 name. This shouldn't happen!!!
892 zocalo-fd: Zocalo_Save.2003-05-19_02.15.06 Error: bnet.c:310 Write error
893 sending to Storage daemon:babylon5:9103: ERR=Broken pipe
894 - Volume names with spaces get jammed into the catalog with 0x1
895 i.e. the SD bashes the Volume but they are not unbased by Dir.
896 jerom-dir: MonthlySave.2003-05-10_17.12.01 Error: Unable to get Media
897 record for Volume Tape^A1: ERR=sql_get.c:788 Media record for Volume
899 jerom-sd: MonthlySave.2003-05-10_17.12.01 Error: Error updating Volume
900 Info: 1991 Catalog Request failed: sql_get.c:788 Media record for Volume
902 - ChangeServiceConfig2A does not exist on WinNT (ADVAPI32.DLL).
903 - Fix "access not allowed" for backup of files on WinXP.
904 - Check for existence of all new Win32 API's. See LoadLibrary in
906 - Count errors during restore and print them in the Job report.
907 - Bug: fix access problems on files restored on WinXP.
908 - Put system type returned by FD into catalog.
909 - Finish WIN32_DATA stream code (bextract, check if can handle stream)
910 - Make SD keep track of Files, Bytes during restore.
911 - If you enter the userid by hand for restore, you get:
912 Enter JobId(s), comma separated, to restore: 74
913 You have selected the following JobId: 74
914 Building directory tree for JobId 74 ...
915 134645140 items inserted into the tree and marked for extraction.
916 - Add SDWriteSeqNo to SD, and probably Read on FD side.
917 - If bootstrap is non-zero for restore, do not show JobId in the
918 OK to run? (yes/mod/no): list.
919 - When all cassettes in magazine are used, got:
920 22-May-2003 18:24 undef-sd: 3304 Autochanger "load slot 1" status is OK.
921 22-May-2003 18:24 undef-sd: NightlySave.2003-05-22_14.08.16 Warning: mount.c:245 Director wanted Volume "TestVolume0009".
922 Current Volume "TestVolume0005" not acceptable because:
923 1998 Volume "TestVolume0005" not Append or Recycle.
924 22-May-2003 18:24 undef-sd: NightlySave.2003-05-22_14.08.16 Error: Autochanger Volume "TestVolume0009" not found in slot 1.
925 Setting slot to zero in catalog.
926 22-May-2003 18:24 undef-sd: Please mount Volume "TestVolume0009" on Storage Device "ARCHIVE 4586" for Job NightlySave.2003-05-22_14
928 Use "mount" command to release Job.
929 22-May-2003 19:24 undef-sd: Please mount Volume "TestVolume0009" on Storage Device "ARCHIVE 4586" for Job NightlySave.2003-05-22_14
931 Use "mount" command to release Job.
932 - Don't zero the Slot when the wrong volume is found -- simply ask
934 - Implement MTIOCERRSTAT on FreeBSD to clear tape error conditions.
935 - Shell expansion fails for working_directory in SD from time to time.
936 - File the Automatically selected: xxx
937 to say Automatically selected Pool: xxx
938 - Default duration with no qualifier is sec should be 1 day
939 - zap sd_auth_key in SD after FD connection.
940 - Find a solution for the multiple FileSet problem (when it is changed). Add date?
941 - Look at Python for a Bacula scripting language -- www.python.org
942 - When Marking a file in Restore that is a hard link, also
943 mark the link so that the data will be reloaded.
944 - Emergency restore info:
946 - Backup working directory
948 - Why don't we get an error message from Win32 FD when bootstrap
949 file cannot be created for restore command?
950 - Fix Win2000 error with no messages during startup.
951 - Make restore more robust in counting error and not immediately bailing
952 out. Also print error message once, but try to continue.
953 - Add code to check that blocks are sequential on restore.
954 - Remove "rufus" and such references from regress.
955 - No READLINE_SRC if found in alternate directory.
956 - If ./btape is called without /dev, assume argument is a Storage resource name.
957 - Find general solution for sscanf size problems (as well as sprintf. Do at run time?
958 - Bytes restored is wrong.
959 - The "List last 20 Jobs run" doesnt work correctly in restore.
960 It doesnt show the last 20 jobs , but some older ones.
961 - Fix Verify VolumeToCatalog to use BSRs -- it is broken.
962 - Implement Release Storage=xxx
963 - Fix restore on Win95/98
964 - Remove the Jmsg() in sql_find.c:102 or only print on hard error.
965 - Implement FileSet VolIndex -- done, but must update old records.
966 - Check this below from Phil.
967 This was SD reported data rather than FD data!
968 > When the job was done, Bacula reported 11084 files restored:
971 > Job: Zocalo_Restore.2003-06-05_16.42.01
973 > Start time: 05-Jun-2003 16:42
974 > End time: 06-Jun-2003 01:21
975 > Files Restored: 11,084
976 > Bytes Restored: 65,474,772
978 > FD termination status: OK
979 > Termination: Restore OK
981 > when it should probably have reported 11084 files scanned, 250 restored.
982 > The bytes restored count looks about right.
984 - Should Bacula make an Append tape as Purged when purging?
985 - Use switch() in backup.c and restore.c in FD instead of giant if statement.
986 - If during a restore, a hard linked file already exists (on option), delete
987 the file and re-link it. This is to avoid the possibility that the
988 user had re-linked the file between the backup and the restore.
989 Do lstat() to see if it is already properly linked.
990 Same for symlinked file.
991 Make sure ifnewer, ifolder, never, ... apply correctly.
992 - Flag so that no connect does not error, and Reschedule a job.
993 - Implement "Reschedule OnError=yes interval=nnn times=xxx"
994 - That restoring a hard link that already exists works correctly.
996 - Make Pool resource handle Counter resources.
997 - Fix first block number after label to be zero instead of 1 (reset after label).
998 - Grep for Backup OK in regression script.
999 - Do NOT reuse same JobId if tape written.
1000 - Implement non-blocking writes and bsock->terminate in heartbeat
1001 thread, or set it in status.c cancel (used pthread_kill() instead of
1003 - Add restore to specific date.
1004 - Instrument use_count on DEVICE packets and ensure that the device is
1005 being close()ed at the appropriate time.
1006 - Test long path names (>64 chars) in Windows -- crashes FD?
1007 - Implement fast block rejection: match_bsr_block().
1008 - Complain if record dropped in bnet_recv because too long.
1009 - Test multiple simultaneous Volumes
1010 - Document recycling algorithm.
1011 - Make Restore report an error if FD or SD term codes are not OK.
1012 - To link with mysqlclient_r may require -lssl -lcrypto
1013 - Document Heart beat code
1014 - Non-fatal errors are not correct counting attribs.c:277
1015 - Check that Block number in JobMedia are correct.
1016 - The bsr for Dan's job has file indexes covering the whole range rather
1017 than only the range contained on the volume.
1018 Constrain FileIndex to be within range for Volume.
1019 - Pass prefix_links to FD.
1020 - Fix restore list of volumes if Volume not selected.