8 Version 1.37 Kern (see below)
9 ========================================================
12 #3 Migration (Move, Copy, Archive Jobs)
13 #7 Single Job Writing to Multiple Storage Devices
16 ## Integrate web-bacula into a new Bacula project with
18 ## Consider moving docs to their own project.
19 ## Move rescue to its own project.
22 - 3. Prevent two drives requesting the same Volume in any given
23 autochanger, by checking if a Volume is mounted on another drive
25 - 7. Implement new Console commands to allow offlining/reserving drives,
26 and possibly manipulating the autochanger (much asked for).
27 - Make "update slots" when pointing to Autochanger, remove
28 all Volumes from other drives. "update slots all-drives"?
31 - Fix FD JobType to be set before RunBeforeJob in FD.
32 - SD crashes after a tape restore then doing a backup.
33 - Look at dird_conf.c:1000: warning: `int size'
34 might be used uninitialized in this function
35 - Make a callback when Rerun failed levels is called.
36 - Give Python program access to Scheduled jobs.
37 - Implement some way to turn off automatic pruning in Jobs.
38 - Implement a way an Admin Job can prune, possibly multiple
39 clients -- Python script?
40 - Implement "NewVolumeEachJob = yes|no" in Dir.
42 - Python script to save with Python, not save, save with Bacula.
43 - Python script to do backup.
44 - Create a new GUI chapter explaining all the GUI programs.
45 - Look at Preben's acl.c error handling code.
46 - Look at adding full Volume and Pool information to a Volume
47 label so that bscan can get *all* the info.
48 - Implement Maximum Job Spool Size
49 - Remove all old Device resource code in Dir and code to pass it
50 back in SD -- better, rework it to pass back device statistics.
51 - Finish implementation of passing all Storage and Device needs to
53 - Check locking of resources -- be sure to lock devices where previously
54 resources were locked.
55 - Add global lock on all devices when creating a device structure.
56 - Make sure that Python has access to Client address/port so that
57 it can check if Clients are alive.
58 - Cleanup and complete Python scripting.
60 - Change the Priority, Client, Storage, JobStatus (error)
61 at the start of a job.
64 - If the user puts "Purge Oldest Volume = yes" or "Recycle Oldest Volume = yes"
65 and there is only one volume in the pool, refuse to do it -- otherwise
66 he fills the Volume, then immediately starts reusing it.
67 - Implement copies and stripes.
68 - Add history file to console.
69 - Each file on tape creates a JobMedia record. Peter has 4 million
70 files spread over 10000 tape files and four tapes. A restore takes
71 16 hours to build the restore list.
72 - By the way: on page http://www.bacula.org/?page=tapedrives , at the
73 bottom, the link to "Tape Testing Chapter" is broken. It goes to
74 /html-manual/... while the others point to /rel-manual/...
76 1) ADIC, DLT, FastStor 4000, 7*20GB
77 2) Sun, DDS, (Suns name unknown - Archive Python DDS drive), 1.2GB
78 3) Wangtek, QIC, 6525ES, 525MB (fixed block size 1k, block size etc.
79 driver dependent - aic7xxx works, ncr53c8xx with problems)
80 4) HP, DDS-2, C1553A, 6*4GB
82 to activate, check or disable the hardware compression feature on my
83 exb-8900 i use the exabyte "MammothTool" you can get it here:
84 http://www.exabyte.com/support/online/downloads/index.cfm
85 There is a solaris version of this tool. With option -C 0 or 1 you can
86 disable or activate compression. Start this tool without any options for
88 - Linux Sony LIB-D81, AIT-3 library works.
89 - Device resource needs the "name" of the SD.
90 - Add and option to see if the file size changed during backup.
92 data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
93 > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
94 > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
95 > Prozess verwendet wird.
96 Restore restores all files, but then fails at the end trying
97 to set the attributes of e:
98 - Add better documentation on how restores can be done
100 - Resolve the problem between Device name and Archive name,
102 - Make sure SD deletes spool files on error exit.
103 - Delete old spool files when SD starts.
104 - Add a restore directory-x
105 - When labeling tapes, if you enter 000026, Bacula uses
106 the tape index rather than the Volume name 000026.
107 - Max Vols limit in Pool off by one?
108 - Tell the "restore" user when browsing is no longer possible.
109 - Require restore via the restore command or make a restore Job
110 get the bootstrap file.
111 - Make bootstrap file handle multiple MediaTypes (SD)
112 - Add offline tape command to Bacula console.
113 - Document that Bootstrap files can be written with cataloging
115 - Upgrade to MySQL 4.1.1 See:
116 http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
117 - Add client version to the Client name line that prints in
120 Enter MediaId or Volume name: 32
121 Enter new Volume name: DLT-20Dec04
122 Automatically selected Pool: Default
123 Connecting to Storage daemon DLTDrive at 192.168.68.104:9103 ...
124 Sending relabel command from "DLT-28Jun03" to "DLT-20Dec04" ...
125 block.c:552 Write error at 0:0 on device /dev/nst0. ERR=Bad file descriptor.
126 Error writing final EOF to tape. This tape may not be readable.
127 dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
128 askdir.c:219 NULL Volume name. This shouldn't happen!!!
129 3912 Failed to label Volume: ERR=dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
131 Label command failed for Volume DLT-20Dec04.
132 Do not forget to mount the drive!!!
133 - Bug: if a job is manually scheduled to run later, it does not appear
134 in any status report and cannot be cancelled.
136 Regression tests (Scott):
137 - Add Pool/Storage override regression test.
138 - Add delete JobId to regression.
139 - Add a regression test for dbcheck.
140 - New test to add bscan to four-concurrent-jobs regression,
141 i.e. after the four-concurrent jobs zap the
142 database as is done in the bscan-test, then use bscan to
143 restore the database, do a restore and compare with the
145 - Add restore of specific JobId to regression (item 3
146 on the restore prompt)
147 - Add IPv6 to regression
148 - Add database test to regression. Test each function like delete,
151 - AntiVir can slow down backups on Win32 systems.
152 - Win32 systems with FAT32 can be much slower than NTFS for
153 more than 1000 files per directory.
157 - A HOLD command to stop all jobs from starting.
158 - A PAUSE command to pause all running jobs ==> release the
160 - Media Type = LTO,LTO-2,LTO-3
161 Media Type Read = LTO,LTO2,LTO3
162 Media Type Write = LTO2, LTO3
164 === From Carsten Menke <bootsy52@gmx.net>
166 Following is a list of what I think in the situations where I'm faced with,
167 could be a usefull enhancement to bacula, which I'm certain other users will
168 benefit from as well.
170 1. NextJob/NextJobs Directive within a Job Resource in the form of
171 NextJobs = job1,job2.
174 I currently solved the problem with running multiple jobs each after each
175 by setting the Max Wait Time for a job to 8 hours, and give
176 the jobs different Priorities. However, there scenarios where
177 1 Job is directly depending on another job, so if the former job fails,
178 the job after it needn't to be run
179 while maybe other jobs should run despite of that
182 A Backup Job and a Verify job, if the backup job fails there is no need to run
183 the verify job, as the backup job already failed. However, one may like
184 to backup the Catalog to disk despite of that the main backup job failed.
187 I see that this is related to the Event Handlers which are on the ToDo
188 list, also it is maybe a good idea to check for the return value and
189 execute different actions based on the return value
192 3. offline capability to bconsole
195 Currently I use a script which I execute within the last Job via the
196 RunAfterJob Directive, to release and eject the tape.
197 So I have to call bconsole "release=Storage-Name" and afterwards
198 mt -f /dev/nst0 eject to get the tape out.
200 If I have multiple Storage Devices, than these may not be /dev/nst0 and
201 I have to modify the script or call it with parameters etc.
202 This would actually not be needed, as everything is already defined
203 in bacula-sd.conf and if I can invoke bconsole with the
204 storage name via $1 in the script than I'm done and information is
207 4. %s for Storage Name added to the chars being substituted in "RunAfterJob"
211 For the reason mentioned in 3. to have the ability to call a
212 script with /scripts/foobar %s and in the script use $1
213 to pass the Storage Name to bconsole
215 5. Setting Volume State within a Job Resource
218 Instead of using "Maximum Volume Jobs" in the Pool Resource,
219 I would have the possibilty to define
220 in a Job Resource that after this certain job is run, the Volume State
221 should be set to "Volume State = Used", this give more flexibility (IMHO).
223 6. Localization of Bacula Messages
226 Unfortunatley many,many people I work with don't speak english very well.
227 So if at least the Reporting messages would be localized then they
228 would understand that they have to change the tape,etc. etc.
230 I volunteer to do the german translations, and if I can convince my wife also
231 french and Morre (western african language).
233 7. OK, this is evil, probably bound to security risks and maybe not possible
234 due to the design of bacula.
236 Implementation of Backtics ( `command` ) for shell comand execution to
237 the "Label Format" Directive.
241 Currently I have defined BACULA_DAY_OF_WEEK="day1|day2..." resulting in
242 Label Format = "HolyBackup-${BACULA_DAY_OF_WEEK[${WeekDay}]}". If I could
243 use backticks than I could use "Label Format = HolyBackup-`date +%A` to have
244 the localized name for the day of the week appended to the
245 format string. Then I have the tape labeled automatically with weekday
246 name in the correct language.
248 - Make output from status use html table tags for nicely
249 presenting in a browser.
250 - Can one write tapes faster with 8192 byte block sizes?
251 - Specify a single directory to restore.
252 - Document security problems with the same password for everyone in
253 rpm and Win32 releases.
254 - Browse generations of files.
255 - I've seen an error when my catalog's File table fills up. I
256 then have to recreate the File table with a larger maximum row
257 size. Relevant information is at
258 http://dev.mysql.com/doc/mysql/en/Full_table.html ; I think the
259 "Installing and Configuring MySQL" chapter should talk a bit
260 about this potential problem, and recommend a solution.
261 - For Solaris must use POSIX awk.
262 - Want speed of writing to tape while despooling.
263 - Supported autochanger:
271 Wangtek 6525ES (SCSI-1 QIC drive, 525MB), under Linux 2.4.something,
272 bacula 1.36.0/1 works with blocksize 16k INSIDE bacula-sd.conf.
273 - Add regex from http://www.pcre.org to Bacula for Win32.
274 - Use only shell tools no make in CDROM package.
275 - Document PostgreSQL performance problems bug 131.
277 - Document that ChangerDevice is used for Alert command.
278 - Include within include does it work?
279 - Implement a Pool of type Cleaning?
280 - Implement VolReadTime and VolWriteTime in SD
281 - Modify Backing up Your Database to include a bootstrap file.
282 - Think about making certain database errors fatal.
283 - Look at correcting the time jump in the scheduler for daylight
284 savings time changes.
285 - Add a "real" timer to network connections.
286 - Write non-optimized bsrs from the JobMedia and Media records,
287 even after Files are pruned.
288 - Promote to Full = Time period
289 - Despool attributes simultaneously with data in a separate
290 thread, rejoined at end of data spooling.
291 - Implement Files/Bytes,... stats for restore job.
292 - Implement Total Bytes Written, ... for restore job.
293 - Check dates entered by user for correctness (month/day/... ranges)
294 - Compress restore Volume listing by date and first file.
295 - Look at patches/bacula_db.b2z postgresql that loops during restore.
297 - Perhaps add read/write programs and/or plugins to FileSets.
298 - How to handle backing up portables ...
299 - Add some sort of guaranteed Interval for upgrading jobs.
300 - Can we write the state file after every job terminates? On Win32
301 the system crashes and the state file is not updated.
304 Documentation to do: (any release a little bit at a time)
305 - Doc to do unmount before removing magazine.
306 - Alternative to static linking "ldd prog" save all binaries listed,
307 restore them and point LD_LIBRARY_PATH to them.
308 - Document add "</dev/null >/dev/null 2>&1" to the bacula-fd command line
309 - Document query file format.
310 - Add more documentation for bsr files.
311 - Document problems with Verify and pruning.
312 - Document how to use multiple databases.
313 - VXA drives have a "cleaning required"
314 indicator, but Exabyte recommends preventive cleaning after every 75
317 In this context, it should be noted that Exabyte has a command-line
318 vxatool utility available for free download. (The current version is
319 vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
320 test the drive, unload tapes, change drive settings, flash new firmware,
322 Of particular interest in this context is that vxatool <device> -i will
323 report, among other details, the time since last cleaning in tape motion
324 minutes. This information can be retrieved (and settings changed, for
325 that matter) through the generic-SCSI device even when Bacula has the
326 regular tape device locked. (Needless to say, I don't recommend
327 changing tape settings while a job is running.)
328 - Lookup HP cleaning recommendations.
329 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
330 - Document doing table repair
333 Testing to do: (painful)
336 For 1.37 Testing/Documentation:
337 - Add bandwidth limiting.
338 - Add acks every once and a while from the SD to keep
339 the line from timing out.
340 - When an error in input occurs and conio beeps, you can back
341 up through the prompt.
342 - Detect fixed tape block mode during positioning by looking at
343 block numbers in btape "test". Possibly adjust in Bacula.
344 - Fix list volumes to output volume retention in some other
345 units, perhaps via a directive.
346 - If opening a tape in read/write mode fails attempt to open
347 it in read-only mode, and mark the tape for read only.
348 - Add a read-only mode to the mount option.
349 - Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
350 with multiple priorities.
351 - If you use restore replace=never, the directory attributes for
352 non-existent directories will not be restored properly.
354 - see lzma401.zip in others directory for new compression
356 - Minimal autochanger handling in Bacula and in btape.
357 - Look into how tar does not save sockets and the possiblity of
358 not saving them in Bacula (Martin Simmons reported this).
359 - Fix restore jobs so that multiple jobs can run if they
360 are not using the same tape(s).
361 - Allow the user to select JobType for manual pruning/purging.
362 - bscan does not put first of two volumes back with all info in
364 - Implement the FreeBSD nodump flag in chflags.
365 - Figure out how to make named console messages go only to that
366 console and to the non-restricted console (new console class?).
367 - Make restricted console prompt for password if *ask* is set or
368 perhaps if password is undefined.
369 - Implement "from ISO-date/time every x hours/days/weeks/months" in
374 MA = (last_MA * 3 + rate) / 4
375 rate = (bytes - last_bytes) / (runtime - last_runtime)
377 ==== from Marc Schoechlin
378 - the help-command should be more verbose
379 (it should explain the paramters of the different
381 -> it´s time-comsuming to consult the manual anytime
382 you need a special parameter
383 -> maybe it´s more easy to maintain this, if the
384 descriptions of that commands are outsourced to
386 - the cd-command should allow complete paths
387 i.e. cd /foo/bar/foo/bar
388 -> if a customer mails me the path to a certain file,
389 it´s faster to enter the specified directory
390 - if the password is not configured in bconsole.conf
391 you should be asked for it.
392 -> sometimes you like to do restore on a customer-machine
393 which shouldn´t know the password for bacula.
394 -> adding the password to the file favours admins
395 to forget to remove the password after usage
397 the protection of that file is less important
398 - long-listed-output of commands should be scrollable
399 like the unix more/less-command does
400 -> if someone runs 200 and more machines, the lists could
401 be a little long and complex
402 - command-output should be shown column by column
403 to reduce scrolling and to increase clarity
405 - lsmark should list the selected files with full
407 - wildcards for selecting and file and directories would be nice
408 - any actions should be interuptable with STRG+C
409 - command-expansion would be pretty cool
411 - When the replace Never option is set, new directory permissions
412 are not restored. See bug 213. To fix this requires creating a
413 list of newly restored directories so that those directory
414 permissions *can* be restored.
415 - Compaction of Disk space by "migrating" Volumes that have pruned
416 Jobs (what criteria? size, #jobs, time).
417 - Add prune all command
418 - Document fact that purge can destroy a part of a restore by purging
419 one volume while others remain valid -- perhaps mark Jobs.
420 - Add multiple-media-types.txt
421 - look at mxt-changer.html
422 - Make ? do a help command (no return needed).
423 - Implement restore directory.
424 - Document streams and how to implement them.
425 - Try not to re-backup a file if a new hard link is added.
426 - Add feature to backup hard links only, but not the data.
427 - Fix stream handling to be simpler.
428 - Add Priority and Bootstrap to Run a Job.
429 - Eliminate Restore "Run Restore Job" prompt by allowing new "run command
431 - Remove View FileSet button from Run a Job dialog.
432 - Handle prompt for restore job at end of Restore command.
433 - Add display of total selected files to Restore window.
434 - Add tree pane to left of window.
435 - Add progress meter.
436 - Max wait time or max run time causes seg fault -- see runtime-bug.txt
437 - Document writing to a CD/DVD with Bacula.
438 - Add a "base" package to the window installer for pthreadsVCE.dll
439 which is needed by all packages.
440 - Add message to user to check for fixed block size when the forward
441 space test fails in btape.
442 - When unmarking a directory check if all files below are unmarked and
443 then remove the + flag -- in the restore tree.
444 - Possibly implement: Action = Unmount Device="TapeDrive1" in Admin jobs.
445 - Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
446 - Revisit the question of multiple Volumes (disk) on a single device.
447 - Add a block copy option to bcopy.
448 - Investigate adding Mac Resource Forks.
449 - Finish work on Gnome restore GUI.
450 - Fix "llist jobid=xx" where no fileset or client exists.
452 it seems to be complaining about 12:00pm which should be a valid 12
453 hour time. I changed the time to 11:59am and everything works fine.
454 Also 12:00am works fine. 0:00pm also works (which I don't think
455 should). None of the values 12:00pm - 12:59pm work for that matter.
456 - Add level to estimate command.
457 - For each job type (Admin, Restore, ...) require only the really necessary
459 - Fix option 2 of restore -- list where file is backed up -- require Client,
460 then list last 20 backups.
461 - Pass Director resource name as an option to the Console.
462 - Add a "batch" mode to the Console (no unsolicited queries, ...).
463 - Add a .list all files in the restore tree (probably also a list all files)
464 Do both a long and short form.
465 - Allow browsing the catalog to see all versions of a file (with
466 stat data on each file).
467 - Restore attributes of directory if replace=never set but directory
469 - Use SHA1 on authentication if possible.
470 - See comtest-xxx.zip for Windows code to talk to USB.
471 - Add Events and Perl scripting.
472 - Add John's appended files:
473 Appended = { /files/server/logs/http/*log }
474 and such files would be treated as follows.On a FULL backup, they would
475 be backed up like any other file.On an INCREMENTAL backup, where a
476 previous INCREMENTAL or FULL was already in thecatalogue and the length
477 of the file wasgreater than the length of the last backup, only thedata
478 added since the last backup will be dumped.On an INCREMENTAL backup, if
479 the length of the file is less than thelength of the file with the same
480 name last backed up, the completefile is dumped.On Windows systems, with
481 creation date of files, we can be evensmarter about this and not count
482 entirely upon the length.On a restore, the full and all incrementals
483 since it will beapplied in sequence to restore the file.
484 - Allow for optional cancelling of SD and FD in case DIR
485 gets a fatal error. Requested by Jesse Guardiani <jesse@wingnet.net>
486 - Add "limit=n" for "list jobs"
487 - Check new HAVE_WIN32 open bits.
488 - Check if the tape has moved before writing.
489 - Handling removable disks -- see below:
490 - Keep track of tape use time, and report when cleaning is necessary.
491 - Add FromClient and ToClient keywords on restore command (or
492 BackupClient RestoreClient).
493 - Implement a JobSet, which groups any number of jobs. If the
494 JobSet is started, all the jobs are started together.
495 Allow Pool, Level, and Schedule overrides.
496 - Enhance cancel to timeout BSOCK packets after a specific delay.
497 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
498 ua_status.!!! Thanks to Alan Brown for this tip.
499 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
500 correctly for multiple simultaneous jobs.
501 - Correct code so that FileSet MD5 is calculated for < and | filename
503 - Implement the Media record flag that indicates that the Volume does disk
505 - Implement VolAddr, which is used when Volume is addressed like a disk,
506 and form it from VolFile and VolBlock.
507 - Make multiple restore jobs for multiple media types specifying
508 the proper storage type.
509 - Implement MediaType keyword in bsr?
510 - Fix fast block rejection (stored/read_record.c:118). It passes a null
511 pointer (rec) to try_repositioning().
512 - Look at extracting Win data from BackupRead.
513 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
514 which would take precidence over the Catalog "JobRetention".
515 - Implement Label Format in Add and Label console commands.
516 - Possibly up network buffers to 65K. Put on variable.
517 - Put email tape request delays on one or more variables. User wants
518 to cancel the job after a certain time interval. Maximum Mount Wait?
519 - Job, Client, Device, Pool, or Volume?
520 Is it possible to make this a directive which is *optional* in multiple
521 resources, like Level? If so, I think I'd make it an optional directive
522 in Job, Client, and Pool, with precedence such that Job overrides Client
523 which in turn overrides Pool.
525 - New Storage specifications:
526 - Want to write to multiple storage devices simultaneously
527 - Want to write to multiple storage devices sequentially (in one job)
528 - Want to read/write simultaneously
529 - Key is MediaType -- it must match
531 Passed to SD as a sort of BSR record called Storage Specification
535 MediaType -> Next MediaType
537 Device -> Next Device
539 Allow multiple Storage specifications
547 Allow Multiple Pool specifications (note, Pool currently
549 Allow Multiple MediaType specifications in Dir conf
550 Allow Multiple Device specifications in Dir conf
551 Perhaps keep this in a single SSR
552 Tie a Volume to a specific device by using a MediaType that
553 is contained in only one device.
554 In SD allow Device to have Multiple MediaTypes
556 - Ideas from Jerry Scharf:
557 First let's point out some big pluses that bacula has for this
559 more importantly it's active. Thank you so much for that
560 even more important, it's not flaky
561 it has an open access catalog, opening many possibilities
562 it's pushing toward heterogeneous systems capability
564 Macintosh file client
565 macs are an interesting niche, but I fear a server is a rathole
566 working bare iron recovery for windows
567 the option for inc/diff backups not reset on fileset revision
568 a) use both change and inode update time against base time
569 b) do the full catalog check (expensive but accurate)
570 sizing guide (how much system is needed to back up N systems/files)
571 consultants on using bacula in building a disaster recovery system
573 or how to get at fancy things that one could do with bacula
574 logwatch code for bacula logs (or similar)
575 linux distro inclusion of bacula (brings good and bad, but necessary)
576 win2k/XP server capability (icky but you asked)
577 support for Oracle database ??
579 - Look at adding SQL server and Exchange support for Windows.
580 - Each DVD-RAM disk would be a volume, just like each tape is
581 a volume. It's a 4.7GB media with random access, but there's nothing about
582 it that I can see that makes it so different than a tape from bacula's
583 perspective. Why couldn't I back up to a bare floppy as a volume (ignoring
585 - Make dev->file and dev->block_num signed integers so that -1 can
586 be an invalid value which happens with BSR.
587 - Create VolAddr for disk files in place of VolFile and VolBlock. This
588 is needed to properly specify ranges.
589 - Add progress of files/bytes to SD and FD.
590 - Print warning message if FileId > 4 billion
591 - do a "messages" before the first prompt in Console
592 - Add a date and time stamp at the beginning of every line in the
593 Job report (Volker Sauer).
594 - Client does not show busy during Estimate command.
595 - Implement Console mtx commands.
596 - Implement a Mount Command and an Unmount Command where
597 the users could specify a system command to be performed
598 to do the mount, after which Bacula could attempt to
599 read the device. This is for Removeable media such as a CDROM.
600 - Most likely, this mount command would be invoked explicitly
601 by the user using the current Console "mount" and "unmount"
602 commands -- the Storage Daemon would do the right thing
603 depending on the exact nature of the device.
604 - As with tape drives, when Bacula wanted a new removable
605 disk mounted, it would unmount the old one, and send a message
606 to the user, who would then use "mount" as described above
607 once he had actually inserted the disk.
608 - Implement dump/print label to UA
609 - Spool to disk only when the tape is full, then when a tape is hung move
611 - bextract is sending everything to the log file ****FIXME****
612 - Allow multiple Storage specifications (or multiple names on
613 a single Storage specification) in the Job record. Thus a job
614 can be backed up to a number of storage devices.
615 - Implement some way for the File daemon to contact the Director
616 to start a job or pass its DHCP obtained IP number.
617 - Implement a query tape prompt/replace feature for a console
618 - Copy console @ code to gnome2-console
619 - Make AES the only encryption algorithm see
620 http://csrc.nist.gov/CryptoToolkit/aes/). It's
621 an officially adopted standard, has survived peer
622 review, and provides keys up to 256 bits.
623 - Take a careful look at SetACL http://setacl.sourceforge.net
624 - Take a careful look at Level for the estimate command, maybe make
625 it a command line option.
626 - Add Volume name to "I cannot write on this volume because"
627 - Make tree walk routines like cd, ls, ... more user friendly
628 by handling spaces better.
629 - Make sure that Bacula rechecks the tape after the 20 min wait.
630 - Set IO_NOWAIT on Bacula TCP/IP packets.
631 - Try doing a raw partition backup and restore by mounting a
634 Yes, it would allow to highly automatic the request for new tapes. If a
635 tape is empty, bacula reads the barcodes (native or simulated), and if
636 an unused tape is found, it runs the label command with all the
637 necessary parameters.
639 By the way can bacula automatically "move" an empty/purged volume say
640 in the "short" pool to the "long" pool if this pool runs out of volume
642 - What to do about "list files job=xxx".
643 - Make Dmsg look at global before calling subroutine.
644 - Get and test MySQL 4.0
645 - Look at how fuser works and /proc/PID/fd that is how Nic found the
646 file descriptor leak in Bacula.
647 - Implement WrapCounters in Counters.
648 - Add heartbeat from FD to SD if hb interval expires.
649 - Can we dynamically change FileSets?
650 - If pool specified to label command and Label Format is specified,
651 automatically generate the Volume name.
652 - Why can't SQL do the filename sort for restore?
653 - Look into Microsoft Volume Shadowcopy Service VSS for backing
654 up system state components (Active Directory, System Volume, ...)
655 - Add ExhautiveRestoreSearch
656 - Look at the possibility of loading only the necessary
657 data into the restore tree (i.e. do it one directory at a
658 time as the user walks through the tree).
659 - Possibly use the hash code if the user selects all for a restore command.
660 - Fix "restore all" to bypass building the tree.
661 - Prohibit backing up archive device (findlib/find_one.c:128)
662 - Implement Release Device in the Job resource to unmount a drive.
663 - Implement Acquire Device in the Job resource to mount a drive,
664 be sure this works with admin jobs so that the user can get
665 prompted to insert the correct tape. Possibly some way to say to
666 run the job but don't save the files.
667 - Make things like list where a file is saved case independent for
670 - Use autochanger to handle multiple devices.
671 - Add SuSE install doc to list.
672 - Check and rechedk "Invalid block number"
673 - User wants to NOT backup up certain big files (email files).
674 - Maybe remove multiple simultaneous devices code in SD.
675 - On Windows with very long path names, it may be impossible to create
676 a file (and thus restore it) because the total length is too long.
677 We must cd into the directory then create the file without the
679 - Implement a Recycle command
680 - Add client name to cram-md5 challenge so Director can immediately
681 verify if it is the correct client.
682 - Audit all UA commands to ensure that we always prompt where possible.
683 - Make bootstrap filename unique.
684 - Test a second language e.g. french.
685 - Start working on Base jobs.
686 - Implement UnsavedFiles DB record.
687 - Implement argc/argv for daemon command line scanning using table driven
689 - From Phil Stracchino:
690 It would probably be a per-client option, and would be called
691 something like, say, "Automatically purge obsoleted jobs". What it
692 would do is, when you successfully complete a Differential backup of a
693 client, it would automatically purge all Incremental backups for that
694 client that are rendered redundant by that Differential. Likewise,
695 when a Full backup on a client completed, it would automatically purge
696 all Differential and Incremental jobs obsoleted by that Full backup.
697 This would let people minimize the number of tapes they're keeping on
698 hand without having to master the art of retention times.
699 - Implement a M_SECURITY message class.
700 - When doing a Backup send all attributes back to the Director, who
701 would then figure out what files have been deleted.
702 - Currently in mount.c:236 the SD simply creates a Volume. It should have
703 explicit permission to do so. It should also mark the tape in error
704 if there is an error.
705 - SD Bytes Read is wrong.
706 - Investigate doing RAW backup of Win32 partition.
707 - Cancel waiting for Client connect in SD if FD goes away.
709 - Implement timeout in response() when it should come quickly.
710 - Implement console @echo command.
711 - Implement a Slot priority (loaded/not loaded).
712 - Implement "vacation" Incremental only saves.
713 - Implement single pane restore (much like the Gftp panes).
714 - Implement Automatic Mount even in operator wait.
715 - Implement create "FileSet"?
716 - Implement restore "current system", but take all files without
717 doing selection tree -- so that jobs without File records can
719 - Add prefixlinks to where or not where absolute links to FD.
720 - Issue message to mount a new tape before the rewind.
721 - Simplified client job initiation for portables.
722 - If SD cannot open a drive, make it periodically retry.
723 - Add more of the config info to the tape label.
725 - If tape is marked read-only, then try opening it read-only rather than
726 failing, and remember that it cannot be written.
727 - Refine SD waiting output:
728 Device is being positioned
729 > Device is being positioned for append
730 > Device is being positioned to file x
732 - Figure out some way to estimate output size and to avoid splitting
733 a backup across two Volumes -- this could be useful for writing CDROMs
734 where you really prefer not to have it split -- not serious.
735 - Have SD compute MD5 or SHA1 and compare to what FD computes.
736 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
737 actual data on the Volume and compare it.
738 - Implement Bacula plugins -- design API
739 - Make bcopy read through bad tape records.
740 - Program files (i.e. execute a program to read/write files).
741 Pass read date of last backup, size of file last time.
742 - Add Signature type to File DB record.
743 - CD into subdirectory when open()ing files for backup to
744 speed up things. Test with testfind().
745 - Priority job to go to top of list.
746 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
747 - Implement some way for the Console to dynamically create a job.
748 - Restore to a particular time -- e.g. before date, after date.
749 - Solaris -I on tar for include list
750 - Need a verbose mode in restore, perhaps to bsr.
751 - bscan without -v is too quiet -- perhaps show jobs.
752 - Add code to reject whole blocks if not wanted on restore.
753 - Check if we can increase Bacula FD priorty in Win2000
754 - Make sure the MaxVolFiles is fully implemented in SD
755 - Check if both CatalogFiles and UseCatalog are set to SD.
756 - Figure out how to do a bare metal Windows restore
757 - Possibly add email to Watchdog if drive is unmounted too
758 long and a job is waiting on the drive.
759 - After unmount, if restore job started, ask to mount.
760 - Convert all %x substitution variables, which are hard to remember
761 and read to %(variable-name). Idea from TMDA.
762 - Remove NextId for SQLite. Optimize.
763 - Move all SQL statements into a single location.
764 - Add UA rc and history files.
765 - put termcap (used by console) in ./configure and
766 allow -with-termcap-dir.
767 - Fix Autoprune for Volumes to respect need for full save.
768 - Fix Win32 config file definition name on /install
769 - Compare tape to Client files (attributes, or attributes and data)
770 - Make all database Ids 64 bit.
771 - Write an applet for Linux.
772 - Allow console commands to detach or run in background.
773 - Fix status delay on storage daemon during rewind.
774 - Add SD message variables to control operator wait time
775 - Maximum Operator Wait
776 - Minimum Message Interval
777 - Maximum Message Interval
778 - Send Operator message when cannot read tape label.
779 - Verify level=Volume (scan only), level=Data (compare of data to file).
780 Verify level=Catalog, level=InitCatalog
782 - Add keyword search to show command in Console.
783 - Events : tape has more than xxx bytes.
784 - Complete code in Bacula Resources -- this will permit
785 reading a new config file at any time.
786 - Handle ctl-c in Console
787 - Implement script driven addition of File daemon to config files.
788 - Think about how to make Bacula work better with File (non-tape) archives.
789 - Write Unix emulator for Windows.
790 - Put memory utilization in Status output of each daemon
791 if full status requested or if some level of debug on.
792 - Make database type selectable by .conf files i.e. at runtime
793 - Set flag for uname -a. Add to Volume label.
794 - Restore files modified after date
795 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
796 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
797 - Timout a job or terminate if link goes down, or reopen link and query.
798 - Concept of precious tapes (cannot be reused).
799 - Make bcopy copy with a single tape drive.
800 - Permit changing ownership during restore.
803 > My suggestion: Add a feature on the systray menu-icon menu to request
804 > an immediate backup now. This would be useful for laptop users who may
805 > not be on the network when the regular scheduled backup is run.
807 > My wife's suggestion: Add a setting to the win32 client to allow it to
808 > shut down the machine after backup is complete (after, of course,
809 > displaying a "System will shut down in one minute, click here to cancel"
810 > warning dialog). This would be useful for sites that want user
811 > woorkstations to be shut down overnight to save power.
814 - Autolabel should be specified by DIR instead of SD.
817 - AutoScan (check checksum of tape)
818 - Format command = "format /dev/nst0"
822 - Seek resolution (usually corresponds to buffer size)
823 - EODErrorCode=ENOSPC or code
824 - Partial Read error code
825 - Partial write error code
826 - Nonformatted read error
827 - Nonformatted write error
828 - WriteProtected error
832 - IgnoreCloseErrors=yes
842 - FD sends unsaved file list to Director at end of job (see
844 - File daemon should build list of files skipped, and then
845 at end of save retry and report any errors.
846 - Write a Storage daemon that uses pipes and
847 standard Unix programs to write to the tape.
849 - Need something that monitors the JCR queue and
850 times out jobs by asking the deamons where they are.
851 - Enhance Jmsg code to permit buffering and saving to disk.
852 - device driver = "xxxx" for drives.
854 - Ensure that /dev/null works
855 - Need report class for messages. Perhaps
856 report resource where report=group of messages
857 - enhance scan_attrib and rename scan_jobtype, and
858 fill in code for "since" option
859 - Director needs a time after which the report status is sent
860 anyway -- or better yet, a retry time for the job.
861 - Don't reschedule a job if previous incarnation is still running.
862 - Some way to automatically backup everything is needed????
863 - Need a structure for pending actions:
865 - termination status (part of buffered msgs?)
867 Read, Write, Clean, Delete
868 - Login to Bacula; Bacula users with different permissions:
869 owner, group, user, quotas
870 - Store info on each file system type (probably in the job header on tape.
871 This could be the output of df; or perhaps some sort of /etc/mtab record.
873 ========= ideas ===============
874 From: "Jerry K. Schieffer" <jerry@skylinetechnology.com>
875 To: <kern@sibbald.com>
876 Subject: RE: [Bacula-users] future large programming jobs
877 Date: Thu, 26 Feb 2004 11:34:54 -0600
879 I noticed the subject thread and thought I would offer the following
880 merely as sources of ideas, i.e. something to think about, not even as
881 strong as a request. In my former life (before retiring) I often
882 dealt with backups and storage management issues/products as a
883 developer and as a consultant. I am currently migrating my personal
884 network from amanda to bacula specifically because of the ability to
885 cross media boundaries during storing backups.
886 Are you familiar with the commercial product called ADSM (I think IBM
887 now sells it under the Tivoli label)? It has a couple of interesting
888 ideas that may apply to the following topics.
890 1. Migration: Consider that when you need to restore a system, there
891 may be pressure to hurry. If all the information for a single client
892 can eventually end up on the same media (and in chronological order),
893 the restore is facillitated by not having to search past information
894 from other clients. ADSM has the concept of "client affinity" that
895 may be associated with it's storage pools. It seems to me that this
896 concept (as an optional feature) might fit in your architecture for
899 ADSM also has the concept of defining one or more storage pools as
900 "copy pools" (almost mirrors, but only in the sense of contents).
901 These pools provide the ability to have duplicte data stored both
902 onsite and offsite. The copy process can be scheduled to be handled
903 by their storage manager during periods when there is no backup
904 activity. Again, the migration process might be a place to consider
905 implementing something like this.
908 > It strikes me that it would be very nice to be able to do things
910 > have the Job(s) backing up the machines run, and once they have all
911 > completed, start a migration job to copy the data from disks Volumes
913 > a tape library and then to offsite storage. Maybe this can already
915 > done with some careful scheduling and Job prioritzation; the events
916 > mechanism described below would probably make it very easy.
918 This is the goal. In the first step (before events), you simply
920 the Migration to tape later.
922 2. Base jobs: In ADSM, each copy of each stored file is tracked in
923 the database. Once a file (unique by path and metadata such as dates,
924 size, ownership, etc.) is in a copy pool, no more copies are made. In
925 other words, when you start ADSM, it begins like your concept of a
926 base job. After that it is in the "incremental" mode. You can
927 configure the number of "generations" of files to be retained, plus a
928 retention date after which even old generations are purged. The
929 database tracks the contents of media and projects the percentage of
930 each volume that is valid. When the valid content of a volume drops
931 below a configured percentage, the valid data are migrated to another
932 volume and the old volume is marked as empty. Note, this requires
933 ADSM to have an idea of the contents of a client, i.e. marking the
934 database when an existing file was deleted, but this would solve your
935 issue of restoring a client without restoring deleted files.
937 This is pretty far from what bacula now does, but if you are going to
938 rip things up for Base jobs,.....
939 Also, the benefits of this are huge for very large shops, especially
940 with media robots, but are a pain for shops with manual media
944 > Base jobs sound pretty useful, but I'm not dying for them.
946 Nobody is dying for them, but when you see what it does, you will die
949 3. Restoring deleted files: Since I think my comments in (2) above
950 have low probability of implementation, I'll also suggest that you
951 could approach the issue of deleted files by a mechanism of having the
952 fd report to the dir, a list of all files on the client for every
953 backup job. The dir could note in the database entry for each file
954 the date that the file was seen. Then if a restore as of date X takes
955 place, only files that exist from before X until after X would be
956 restored. Probably the major cost here is the extra date container in
957 each row of the files table.
959 Thanks for "listening". I hope some of this helps. If you want to
960 contact me, please send me an email - I read some but not all of the
961 mailing list traffic and might miss a reply there.
963 Please accept my compliments for bacula. It is doing a great job for
964 me!! I sympathize with you in the need to wrestle with excelence in
965 execution vs. excelence in feature inclusion.
970 ==============================
973 - Design at hierarchial storage for Bacula. Migration and Clone.
974 - Implement FSM (File System Modules).
975 - Audit M_ error codes to ensure they are correct and consistent.
976 - Add variable break characters to lex analyzer.
977 Either a bit mask or a string of chars so that
978 the caller can change the break characters.
979 - Make a single T_BREAK to replace T_COMMA, etc.
980 - Ensure that File daemon and Storage daemon can
981 continue a save if the Director goes down (this
982 is NOT currently the case). Must detect socket error,
983 buffer messages for later.
984 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
985 - Add ability to backup to two Storage devices (two SD sessions) at
986 the same time -- e.g. onsite, offsite.
987 - Add the ability to consolidate old backup sets (basically do a restore
988 to tape and appropriately update the catalog). Compress Volume sets.
989 Might need to spool via file is only one drive is available.
990 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
991 someway to do so with every volume that has less than x% valid
995 Migration: Move a backup from one Volume to another
996 Clone: Copy a backup -- two Volumes
998 Bacula Migration is based on Jobs (apparently Networker is file by file).
1000 Migration triggered by:
1004 Highwater mark (keep total size)
1009 ======================================================
1011 It is somewhat like a Full save becomes an incremental since
1012 the Base job (or jobs) plus other non-base files.
1014 - A Base backup is same as Full backup, just different type.
1015 - New BaseFiles table that contains:
1017 BaseJobId - Base JobId referenced for this FileId (needed ???)
1018 JobId - JobId currently running
1019 FileId - File not backed up, exists in Base Job
1020 FileIndex - FileIndex from Base Job.
1021 i.e. for each base file that exists but is not saved because
1022 it has not changed, the File daemon sends the JobId, BaseId,
1023 FileId, FileIndex back to the Director who creates the DB entry.
1024 - To initiate a Base save, the Director sends the FD
1025 the FileId, and full filename for each file in the Base.
1026 - When the FD finds a Base file, he requests the Director to
1027 send him the full File entry (stat packet plus MD5), or
1028 conversely, the FD sends it to the Director and the Director
1029 says yes or no. This can be quite rapid if the FileId is kept
1030 by the FD for each Base Filename.
1031 - It is probably better to have the comparison done by the FD
1032 despite the fact that the File entry must be sent across the
1034 - An alternative would be to send the FD the whole File entry
1035 from the start. The disadvantage is that it requires a lot of
1036 space. The advantage is that it requires less communications
1038 - The Job record must be updated to indicate that one or more
1040 - At end of Job, FD returns:
1041 1. Count of base files/bytes not written to tape (i.e. matches)
1042 2. Count of base file that were saved i.e. had changed.
1043 - No tape record would be written for a Base file that matches, in the
1044 same way that no tape record is written for Incremental jobs where
1045 the file is not saved because it is unchanged.
1046 - On a restore, all the Base file records must explicitly be
1047 found from the BaseFile tape. I.e. for each Full save that is marked
1048 to have one or more Base Jobs, search the BaseFile for all occurrences
1050 - An optimization might be to make the BaseFile have:
1056 This would avoid the need to explicitly fetch each File record for
1057 the Base job. The Base Job record will be fetched to get the
1058 VolSessionId and VolSessionTime.
1059 =========================================================
1062 ==========================================================
1064 For each Incremental job that is run, there may be files that
1065 were found but not saved because they were locked (this applies
1066 only to Windows). Such a system could send back to the Director
1067 a list of Unsaved files.
1069 - New UnSavedFiles table that contains:
1073 - Then in the next Incremental job, the list of Unsaved Files will be
1074 feed to the FD, who will ensure that they are explicitly chosen even
1075 if standard date/time check would not have selected them.
1076 =============================================================
1079 Done: (see kernsdone for more)
1082 - John's Full save failed with 1.32c FD and 1.31 Dir no FD status,
1083 and no error message.
1084 - Add fd and st as Console keywords.
1085 - Recycling volume with a Slot requires an operator intervention:
1086 rufus-dir: Start Backup JobId 18, Job=kernsave.2003-11-01_21.23.52
1087 rufus-dir: Pruned 1 Job on Volume Vol01 from catalog.
1088 rufus-dir: There are no Jobs associated with Volume Vol01. Marking it purged.
1089 rufus-dir: Recycled volume "Vol01"
1090 rufus-sd: Please mount Volume "Vol01" on Storage Device "DDS-4" for Job kernsave.2003-11-01_21.23.52
1091 Use "mount" command to release Job.
1092 - Implement Dan's bacula script (email of 26 Oct).
1093 - Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
1094 - Edit the Client/Storage name into authentication failure messages.
1095 - Fix packet too big problem. This is most likely a Windows TCP stack
1097 - Implement ClientRunBeforeJob and ClientRunAfterJob.
1098 - Implement forward spacing block/file: position_device(bsr) --
1099 just before read_block_from_device();
1102 Multiple drive autochanger data: see Alan Brown
1103 mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
1104 Unloading Data Transfer Element into Storage Element 1...source Element
1105 Address 480 is Empty
1107 (drive 0 was empty and so was slot 1)
1108 > mtx -f xxx load 15 0
1109 no response, just returns to the command prompt when complete.
1110 > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
1111 Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
1112 Data Transfer Element 1:Empty
1113 Storage Element 1:Empty
1114 Storage Element 2:Full :VolumeTag=HX002
1115 Storage Element 3:Full :VolumeTag=HX003
1116 Storage Element 4:Full :VolumeTag=HX004
1117 Storage Element 5:Full :VolumeTag=HX005
1118 Storage Element 6:Full :VolumeTag=HX006
1119 Storage Element 7:Full :VolumeTag=HX007
1120 Storage Element 8:Full :VolumeTag=HX008
1121 Storage Element 9:Full :VolumeTag=HX009
1122 Storage Element 10:Full :VolumeTag=HX010
1123 Storage Element 11:Empty
1124 Storage Element 12:Empty
1125 Storage Element 13:Empty
1126 Storage Element 14:Empty
1127 Storage Element 15:Empty
1128 Storage Element 16:Empty....
1129 Storage Element 28:Empty
1130 Storage Element 29:Full :VolumeTag=CLNU01L1
1131 Storage Element 30:Empty....
1132 Storage Element 57:Empty
1133 Storage Element 58:Full :VolumeTag=NEX261L2
1134 Storage Element 59 IMPORT/EXPORT:Empty
1135 Storage Element 60 IMPORT/EXPORT:Empty
1137 Unloading Data Transfer Element into Storage Element 15...done
1139 (just to verify it remembers where it came from, however it can be
1140 overrriden with mtx unload {slotnumber} to go to any storage slot.)
1142 There needs to be a table of drive # to devices somewhere - If there are
1143 multiple changers or drives there may not be a 1:1 correspondance between
1144 changer drive number and system device name - and depending on the way the
1145 drives are hooked up to scsi busses, they may not be linearly numbered
1146 from an offset point either.something like
1148 Autochanger drives = 2
1149 Autochanger drive 0 = /dev/nst1
1150 Autochanger drive 1 = /dev/nst2
1151 IMHO, it would be _safest_ to use explicit mtx unload commands at all
1152 times, not just for multidrive changers. For a 1 drive changer, that's
1158 MTX's manpage (1.2.15):
1159 unload [<slotnum>] [ <drivenum> ]
1160 Unloads media from drive <drivenum> into slot
1161 <slotnum>. If <drivenum> is omitted, defaults to
1162 drive 0 (as do all commands). If <slotnum> is
1163 omitted, defaults to the slot that the drive was
1164 loaded from. Note that there's currently no way
1165 to say 'unload drive 1's media to the slot it
1166 came from', other than to explicitly use that
1167 slot number as the destination.AB
1173 undef# camcontrol devlist
1174 <WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
1175 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
1176 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
1178 tapeinfo -f /dev/sg0 with a bad tape in drive 1:
1179 [kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
1180 Product Type: Tape Drive
1182 Product ID: 'C5713A '
1184 Attached Changer: No
1185 TapeAlert[3]: Hard Error: Uncorrectable read/write error.
1186 TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
1193 Medium Type: Not Loaded
1196 DataCompEnabled: yes
1197 DataCompCapable: yes
1198 DataDeCompEnabled: yes
1205 Handling removable disks
1207 From: Karl Cunningham <karlc@keckec.com>
1209 My backups are only to hard disk these days, in removable bays. This is my
1210 idea of how a backup to hard disk would work more smoothly. Some of these
1211 things Bacula does already, but I mention them for completeness. If others
1212 have better ways to do this, I'd like to hear about it.
1214 1. Accommodate several disks, rotated similar to how tapes are. Identified
1215 by partition volume ID or perhaps by the name of a subdirectory.
1216 2. Abort & notify the admin if the wrong disk is in the bay.
1217 3. Write backups to different subdirectories for each machine to be backed
1219 4. Volumes (files) get created as needed in the proper subdirectory, one
1221 5. When a disk is recycled, remove or zero all old backup files. This is
1222 important as the disk being recycled may be close to full. This may be
1223 better done manually since the backup files for many machines may be
1224 scattered in many subdirectories.
1229 - Save mount point for directories not traversed with onefs=yes.
1230 - Add seconds to start and end times in the Job report output.
1231 - if 2 concurrent backups are attempted on the same tape
1232 drive (autoloader) into different tape pools, one of them will exit
1233 fatally instead of halting until the drive is idle
1234 - Update StartTime if job held in Job Queue.
1235 - Look at www.nu2.nu/pebuilder as a helper for full windows
1236 bare metal restore. (done by Scott)
1237 - Fix orphanned buffers:
1238 Orphaned buffer: 24 bytes allocated at line 808 of rufus-dir job.c
1239 Orphaned buffer: 40 bytes allocated at line 45 of rufus-dir alist.c
1240 - Implement Preben's suggestion to add
1241 File System Types = ext2, ext3
1242 to FileSets, thus simplifying backup of *all* local partitions.
1243 - Try to open a device on each Job if it was not opened
1244 when the SD started.
1245 - Add dump of VolSessionId/Time and FileIndex with bls.
1246 - If Bacula does not find the right tape in the Autochanger,
1247 then mark the tape in error and move on rather than asking
1248 for operator intervention.
1249 - Cancel command should include JobId in list of Jobs.
1250 - Add performance testing hooks
1251 - Bootstrap from JobMedia records.
1252 - Implement WildFile and WildDir to solve problem of
1253 saving only *.doc files.
1255 Please use the "label" command to create a new Volume for:
1256 Storage: DDS-4-changer
1260 The defined Storage resources are:
1261 - Copy Changer Device and Changer Command from Autochanger
1262 to Device resource in SD if none given in Device resource.
1263 - 1. Automatic use of more than one drive in an autochanger (done)
1264 - 2. Automatic selection of the correct drive for each Job (i.e.
1265 selects a drive with an appropriate Volume for the Job) (done)
1266 - 6. Allow multiple simultaneous Jobs referencing the same pool write
1267 to several tapes (some new directive(s) are are probably needed for
1270 - Key on Storage rather than Pool (done)
1271 - Allow multiple drives to use same Pool (change jobq.c DIR) (done).
1272 - Synchronize multiple drives so that not more
1273 than one loads a tape and any time (done)
1274 - 4. Use Changer Device and Changer Command specified in the
1275 Autochanger resource, if none is found in the Device resource.
1276 You can continue to specify them in the Device resource if you want
1277 or need them to be different for each device.
1278 - 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
1279 that can allow a Device be part of an Autochanger, and hence the changer
1280 script protected, but if set to no, will prevent the Device from being
1281 automatically selected from the changer. This allows the device to
1282 be directly accessed through its Device name, but not through the
1284 #6 Select one from among Multiple Storage Devices for Job
1285 #5 Events that call a Python program
1286 (Implemented in Dir/SD)
1287 - Make sure the Device name is in the Query packet returned.
1288 - Don't start a second file job if one is already running.
1289 - Implement EOF/EOV labels for ANSI labels
1290 - Implement IBM labels.
1291 - When Python creates a new label, the tape is immediately
1292 recycled and no label created. This happens when using
1293 autolabeling -- even when Python doesn't generate the name.
1294 - Scratch Pool where the volumes can be re-assigned to any Pool.
1295 - 28-Mar 23:19 rufus-sd: acquire.c:379 Device "DDS-4" (/dev/nst0)
1296 is busy reading. Job 6 canceled.
1297 - Remove separate thread for opening devices in SD. On the other
1298 hand, don't block waiting for open() for devices.
1299 - Fix code to either handle updating NumVol or to calculate it in
1301 - Ensure that you cannot exclude a directory or a file explicitly
1303 #4 Embedded Python Scripting
1304 (Implemented in Dir/SD/FD)
1305 - Add Python writable variable for changing the Priority,
1306 Client, Storage, JobStatus (error), ...
1309 - Add disk seeking on restore; turn off seek on tapes.