8 Data encryption Meno Abels (see projects)
9 Communication encryption Meno Abels
10 Version 1.35 Kern (see below)
11 ========================================================
13 1.35 Items to do for release:
14 - Bacula rescue CDROM implement isolinux
15 - Add new DCR calling sequences everywhere in SD. This will permit
16 simultaneous use of multiple devices by a single job.
17 - Look at patches/bacula_db.b2z postgresql that loops during restore.
19 - Perhaps add read/write programs and/or plugins to FileSets.
21 - Add bscan to four-concurrent-jobs regression.
23 - Add IPv6 to regression
24 - Alternative to static linking "ldd prog" save all binaries listed,
25 restore them and point LD_LIBRARY_PATH to them.
26 - Document a get out of jail procedure if everything breaks if
27 you lost/broke the Catalog -- do the same for "I know my
28 file is there how do I get it back?".
29 - Test/doc Tape Alerts
30 - Doc update AllFromVol
31 - Doc dbcheck eliminate orphaned clients.
32 - Doc new duration time input editing.
33 - Doc -p option in stored
34 - Document that console commands can be abbreviated.
37 Documentation to do: (any release a little bit at a time)
38 - Document query file format.
39 - Add more documentation for bsr files.
40 - Document problems with Verify and pruning.
41 - Document how to use multiple databases.
42 - VXA drives have a "cleaning required"
43 indicator, but Exabyte recommends preventive cleaning after every 75
46 In this context, it should be noted that Exabyte has a command-line
47 vxatool utility available for free download. (The current version is
48 vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
49 test the drive, unload tapes, change drive settings, flash new firmware,
51 Of particular interest in this context is that vxatool <device> -i will
52 report, among other details, the time since last cleaning in tape motion
53 minutes. This information can be retrieved (and settings changed, for
54 that matter) through the generic-SCSI device even when Bacula has the
55 regular tape device locked. (Needless to say, I don't recommend
56 changing tape settings while a job is running.)
57 - Lookup HP cleaning recommendations.
58 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
59 - Add more obvious documentation of @ for conf files.
60 - Document doing table repair
61 - New IP address specification is used as follows:
62 [sdaddresses|diraddresses|fdaddresses] = { [[ip|ipv4|ipv6] = {
63 [[addr|port] = [^ ]+[\n;]+] }] }
65 so it could look for example like this:
66 SDaddresses = { ip = {
67 addr = 1.2.3.4; port = 1205; }
69 addr = 1.2.3.4; port = http; }
85 addr = bluedot.thun.net
88 as a consequence, you can now specify multiple IP addresses and
89 ports to be used. In the case of a server, it will listen on
90 all those that you specify. In the case of connecting to the server,
91 Bacula will attempt connecting to one at a time until it succeeds.
92 And, in a few other special cases, Bacula will use only the first
95 The default port numbers are still the same and the services and hosts
96 are also resolved by name. So now you could use the real names for the
99 An ip section will allow resolution to either an ipv4 or an ipv6 address.
100 An ipv4 section forces the resolution to be only ipv4, and an ipv6 section
101 forces the resolution to be only ipv6.
105 Testing to do: (painful)
108 For 1.37 Testing/Documentation:
109 - Fix find_device in stored/dircmd.c:462 (see code)
110 - Add db check test to regression. Test each function like delete,
112 - If you use restore replace=never, the directory attributes for
113 non-existent directories will not be restored properly.
118 mt status and tapeinfo output are attached. Default blocksize was
119 originally 512 bytes. I ran the following test on my machine:
121 - set defblksize to 512
122 - started bacula, labelled tape, ran job
123 - job completes with the following in log
124 SD termination status: OK
125 Termination: Backup OK
126 - restore attempts with blocksize set to 0 or 512 result in the familiar
127 "Volume data error! Wanted block-id BB02, got . Buffer discarded."
130 # tapeinfo -f /dev/sg0
131 Product Type: Tape Drive
133 Product ID: 'TSL-11000 '
135 Attached Changer: Yes
136 SerialNumber: '0010000443'
143 Medium Type: Not Loaded
148 DataDeCompEnabled: yes
154 # mt -f /dev/nst0 status
156 File number=0, block number=132, partition=0.
157 Tape block size 512 bytes. Density code 0x26 (DDS-4 or QIC-4GB).
158 Soft error count since last status=0
159 General status bits on (1010000):
165 - see lzma401.zip in others directory for new compression
167 - Minimal autochanger handling in Bacula and in btape.
168 - Look into how tar does not save sockets and the possiblity of
169 not saving them in Bacula (Martin Simmons reported this).
170 The next two lines will show them.
171 localmounts=`awk '/ext/ { print $2 }' /proc/mounts` # or whatever
172 find $localmounts -xdev -type s -ls
173 - Fix restore jobs so that multiple jobs can run if they
174 are not using the same tape(s).
175 - Allow the user to select JobType for manual pruning/purging.
176 - Look at adding Client run command that will use the
177 port opened by the client.
178 - bscan does not put first of two volumes back with all info in
180 - Implement the FreeBSD nodump flag in chflags.
181 - Figure out how to make named console messages go only to that
182 console and to the non-restricted console (new console class?).
183 - Make restricted console prompt for password if *ask* is set or
184 perhaps if password is undefined.
185 - Implement "from ISO-date/time every x hours/days/weeks/months" in
187 ==== from Marc Schoechlin
188 - the help-command should be more verbose
189 (it should explain the paramters of the different
191 -> it´s time-comsuming to consult the manual anytime
192 you need a special parameter
193 -> maybe it´s more easy to maintain this, if the
194 descriptions of that commands are outsourced to
196 - the cd-command should allow complete paths
197 i.e. cd /foo/bar/foo/bar
198 -> if a customer mails me the path to a certain file,
199 it´s faster to enter the specified directory
200 - if the password is not configured in bconsole.conf
201 you should be asked for it.
202 -> sometimes you like to do restore on a customer-machine
203 which shouldn´t know the password for bacula.
204 -> adding the password to the file favours admins
205 to forget to remove the password after usage
207 the protection of that file is less important
208 - long-listed-output of commands should be scrollable
209 like the unix more/less-command does
210 -> if someone runs 200 and more machines, the lists could
211 be a little long and complex
212 - command-output should be shown column by column
213 to reduce scrolling and to increase clarity
215 - lsmark should list the selected files with full
217 - wildcards for selecting and file and directories would be nice
218 - any actions should be interuptable with STRG+C
219 - command-expansion would be pretty cool
221 - Compaction of Disk space by "migrating" Volumes that have pruned
222 Jobs (what criteria? size, #jobs, time).
223 - Add prune all command
224 - Document fact that purge can destroy a part of a restore by purging
225 one volume while others remain valid -- perhaps mark Jobs.
226 - Add multiple-media-types.txt
227 - look at mxt-changer.html
228 - Make ? do a help command (no return needed).
229 - Implement restore directory.
230 - Add All Local Partitions = yes to new style saves.
231 - Document streams and how to implement them.
232 - Possibly implement "Ensure Full Backup = yes" looks for a failed full backup
233 and upgrades the current backup if one exists.
234 - Check that barcode reading and update slots scan works.
235 - Try not to re-backup a file if a new hard link is added.
236 - Add feature to backup hard links only, but not the data.
237 - Add "All Local = yes" option to save to include all local partitions.
238 - Fix stream handling to be simpler.
239 - Add Priority and Bootstrap to Run a Job.
240 - Eliminate Restore "Run Restore Job" prompt by allowing new "run command
242 - Remove View FileSet button from Run a Job dialog.
243 - Don't count higher level non-saved directories in Files expected
245 - Handle prompt for restore job at end of Restore command.
246 - Add display of total selected files to Restore window.
247 - Add tree pane to left of window.
248 - Add progress meter.
249 - Polling does not work for restore. It tries a number of times,
250 gives up, and crashes the SD.
251 - Lock jcr_chain when doing attach/detach in acquire.c
252 - Add assert in free_jcr if attach/detach chain active.
253 - Max wait time or max run time causes seg fault -- see runtime-bug.txt
254 - Document writing to a CD/DVD with Bacula.
255 - Add check for tape alerts.
256 - Add a "base" package to the window installer for pthreadsVCE.dll
257 which is needed by all packages.
258 - Add message to user to check for fixed block size when the forward
259 space test fails in btape.
260 - When unmarking a directory check if all files below are unmarked and
261 then remove the + flag -- in the restore tree.
262 - Possibly implement: Action = Unmount Device="TapeDrive1" in Admin jobs.
263 - Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
264 - Revisit the question of multiple Volumes (disk) on a single device.
265 - Finish SIGHUP work.
266 - Check that all change in wait status in the SD are
267 signaled to the Director.
268 - Add a block copy option to bcopy.
269 - Investigate adding Mac Resource Forks.
270 - Finish work on Gnome restore GUI.
271 - Fix "llist jobid=xx" where no fileset or client exists.
272 - Check pruning of restore jobs.
274 it seems to be complaining about 12:00pm which should be a valid 12
275 hour time. I changed the time to 11:59am and everything works fine.
276 Also 12:00am works fine. 0:00pm also works (which I don't think
277 should). None of the values 12:00pm - 12:59pm work for that matter.
278 - Add level to estimate command.
279 - For each job type (Admin, Restore, ...) require only the really necessary
281 - Fix option 2 of restore -- list where file is backed up -- require Client,
282 then list last 20 backups.
283 - Add all pools in Dir conf to DB also update them to catch changed
284 LabelFormats and such.
285 - Update volumes FromPool=xxx does all volumes.
286 - Pass Director resource name as an option to the Console.
287 - Add a "batch" mode to the Console (no unsolicited queries, ...).
288 - Add code to check for tape alerts -- tapeinfo.
289 - Make sure list of Volumes needed is in correct order for restore.
291 - Remove paths (and files that reference them) that have no trailing slash
292 in dbcheck -- or add a trailing slash.
293 - Remove Filenames (and files that reference them) that have a trailing
294 slash in dbcheck -- or remove the trailing slash.
295 - Remove orphaned paths/filenames by copying them to a new table with a
296 reference count, then mark all referenced files/paths and remove unreferenced
298 - Add a .list all files in the restore tree (probably also a list all files)
299 Do both a long and short form.
300 - Allow browsing the catalog to see all versions of a file (with
301 stat data on each file).
302 - Restore attributes of directory if replace=never set but directory
304 - Allow "delete job jobid=xxx,yyy,aaa-bbb" i.e. list + ranges.
305 - Use SHA1 on authentication if possible.
306 - See comtest-xxx.zip for Windows code to talk to USB.
307 - Make btape accept Device Names in addition to Archive names.
308 - Add Events and Perl scripting.
309 - Add John's appended files:
310 Appended = { /files/server/logs/http/*log }
311 and such files would be treated as follows.On a FULL backup, they would
312 be backed up like any other file.On an INCREMENTAL backup, where a
313 previous INCREMENTAL or FULL was already in thecatalogue and the length
314 of the file wasgreater than the length of the last backup, only thedata
315 added since the last backup will be dumped.On an INCREMENTAL backup, if
316 the length of the file is less than thelength of the file with the same
317 name last backed up, the completefile is dumped.On Windows systems, with
318 creation date of files, we can be evensmarter about this and not count
319 entirely upon the length.On a restore, the full and all incrementals
320 since it will beapplied in sequence to restore the file.
321 - Add a regression test for dbcheck.
322 - Add disk seeking on restore. - Allow
323 for optional cancelling of SD and FD in case DIR
324 gets a fatal error. Requested by Jesse Guardiani <jesse@wingnet.net>
325 - Bizarre message: Error: Could not open WriteBootstrap file:
326 - Build console in client only build.
327 - Add "limit=n" for "list jobs"
328 - Check new HAVE_WIN32 open bits.
329 - Check if the tape has moved before writing.
330 - Handling removable disks -- see below:
331 - Multiple drive autochanger support -- see below.
332 - Keep track of tape use time, and report when cleaning is necessary.
333 - Fix FreeBSD mt_count problem.
334 - Add FromClient and ToClient keywords on restore command (or
335 BackupClient RestoreClient).
336 - Automatic "update slots" on user configuration directive when a
338 - Implement a JobSet, which groups any number of jobs. If the
339 JobSet is started, all the jobs are started together.
340 Allow Pool, Level, and Schedule overrides.
341 - Enhance cancel to timeout BSOCK packets after a specific delay.
342 - When I restore to Windows the Created, Accessed and Modifiedtimes are
343 those of the time of the restore, not those of the originalfile.
344 The dates you will find in your restore log seem to be the original
346 - Volume "add"ed to Pool gets recycled in first use. VolBytes=0
347 - If a tape is recycled while it is mounted, Stanislav Tvrudy must do an
348 additional mount to deblock the job.
350 bscan: sql_update.c:65 UPDATE File SET MD5='Ij+5kwN6TFIxK+8l8+/I+A' WHERE FileId=0
351 bscan: bscan.c:1074 Could not add MD5/SHA1 to File record. ERR=sql_update.c:65 Update problem: affected_rows=0
352 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
353 ua_status.!!! Thanks to Alan Brown for this tip.
354 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
355 correctly for multiple simultaneous jobs.
356 - Correct code so that FileSet MD5 is calculated for < and | filename
358 - Mark Volume in error on error from WEOF.
359 - Implement the Media record flag that indicates that the Volume does disk
361 - Implement VolAddr, which is used when Volume is addressed like a disk,
362 and form it from VolFile and VolBlock.
363 - Make multiple restore jobs for multiple media types specifying
364 the proper storage type.
365 - Implement MediaType keyword in bsr?
366 - Fix fast block rejection (stored/read_record.c:118). It passes a null
367 pointer (rec) to try_repositioning().
368 - Look at extracting Win data from BackupRead.
369 - Having dashes in filenames apparently creates problems for restore
370 by filename??? hard to believe.
371 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
372 which would take precidence over the Catalog "JobRetention".
373 - Implement Label Format in Add and Label console commands.
374 - Possibly up network buffers to 65K. Put on variable.
375 - Put email tape request delays on one or more variables. User wants
376 to cancel the job after a certain time interval. Maximum Mount Wait?
377 - Job, Client, Device, Pool, or Volume?
378 Is it possible to make this a directive which is *optional* in multiple
379 resources, like Level? If so, I think I'd make it an optional directive
380 in Job, Client, and Pool, with precedence such that Job overrides Client
381 which in turn overrides Pool.
382 - Print a message when a job starts if the conf file is not current.
384 - Spooling ideas taken from Volker Sauer's and other's emails:
385 > IMHO job spooling should be turned on
391 > where and 2) overrides 1) and 3) is independent.
393 Yes, this is the minimum that I think is necessary.
397 > It should be switched by job, because the job that backs up the machine
398 > with the bacula-sd on doesn't need spooling.
399 > It should be switched by schedule, because for full-backups I don't need
400 > spooling, so I can switch it off (because the network faster then the
403 True, with the exception that if you have enough disk spool space,
404 and you want to run concurrent jobs, spooling can eliminate the block
405 interleaving restore inefficiencies.
407 > And you should be able to turn it of by sd for sd-machines with low disk
408 > capacity or if you just don't need or want this feature.
411 > - definitly the possibility for multipe spool direcories
413 Having multiple directories is no problem -- having different maximum
414 sizes creates specification problems. At some point, I will probably
415 have a common SD pool of spool directories as well as a set of
416 private spool directories for each device. The first implementation
417 will be a set of private spool directories for each device since
418 managing a global pool with a bunch of threads writing into the same
419 directory is *much* more complicated and prone to error.
421 > - the ability to spool parts of a backup (not the whole client)
423 This may change in the future, but for the moment, it will spool
424 either to a job high water mark, or until the directory is full
425 (reaches max spool size or I/O error). It will then write to tape,
426 truncate the spool file, and begin spooling again.
428 > - spooling while writing to tape
430 Not within a job, but yes, if you run concurrent jobs -- each is a
431 different thread. Within a job could be a feature, but *much* later.
433 > - parallel spooling (like parallel jobs/ concurrent jobs) of clients
435 Yes, this is one of my main motivations for doing it (aside from
436 eliminating tape "shoe shine" during incremental backups.
438 > - flushing a backup that only went to disk (like amflush in amanda)
440 This will be a future feature, since spooling is different from backing
441 up to disk. The future feature will be "migration" which will move a job
442 from one backup Volume to another.
444 - New Storage specifications:
445 Passed to SD as a sort of BSR record called Storage Specification
449 MediaType -> Next MediaType
451 Device -> Next Device
452 Write Copy Resource that makes a copy of a resource.
454 Allow multiple Storage specifications
462 Allow Multiple Pool specifications (note, Pool currently
464 Allow Multiple MediaType specifications
465 Allow Multiple Device specifications
466 Perhaps keep this in a single SSR
467 Tie a Volume to a specific device by using a MediaType that
468 is contained in only one device.
469 In SD allow Device to have Multiple MediaTypes
472 - Look at www.nu2.nu/pebuilder as a helper for full windows
474 Ideas from Jerry Scharf:
475 First let's point out some big pluses that bacula has for this
477 more importantly it's active. Thank you so much for that
478 even more important, it's not flaky
479 it has an open access catalog, opening many possibilities
480 it's pushing toward heterogeneous systems capability
482 I don't remember an include file directive for config files
483 (not filesets, actual config directives)
484 can you check the configs without starting the daemon?
485 some warnings about possible common mistakes
487 doing the testing and blessing of concurrent backup writes
488 this is absolutely necessary in the enterprise
489 easy user recovery GUI with full access checking
490 Macintosh file client
491 macs are an interesting niche, but I fear a server is a rathole
492 working bare iron recovery for windows
493 much better handling on running config changes
494 thinking through the logic of what happens to jobs in progress
495 the option for inc/diff backups not reset on fileset revision
496 a) use both change and inode update time against base time
497 b) do the full catalog check (expensive but accurate)
498 sizing guide (how much system is needed to back up N systems/files)
499 consultants on using bacula in building a disaster recovery system
501 or how to get at fancy things that one could do with bacula
502 logwatch code for bacula logs (or similar)
503 linux distro inclusion of bacula (brings good and bad, but necessary)
504 win2k/XP server capability (icky but you asked)
505 support for Oracle database ??
507 - Look at adding SQL server and Exchange support for Windows.
508 - Restore: Enter Filename: 'C:/Documents and Settings/Comercial/My
509 Documents/MOP/formulário de registro BELAS ARTES.doc' causes Bacula to
511 - Each DVD-RAM disk would be a volume, just like each tape is
512 a volume. It's a 4.7GB media with random access, but there's nothing about
513 it that I can see that makes it so different than a tape from bacula's
514 perspective. Why couldn't I back up to a bare floppy as a volume (ignoring
516 - Make dev->file and dev->block_num signed integers so that -1 can
517 be an invalid value which happens with BSR.
518 - Create VolAddr for disk files in place of VolFile and VolBlock. This
519 is needed to properly specify ranges.
520 - Print bsmtp output to job report so that problems will be seen.
521 - Pass the number of files to be restored to the FD for reporting
522 - Add progress of files/bytes to SD and FD.
523 - Don't continue Restore if no files selected.
524 - Print warning message if FileId > 4 billion
525 - do a "messages" before the first prompt in Console
526 - Add a date and time stamp at the beginning of every line in the
527 Job report (Volker Sauer).
528 - Client does not show busy during Estimate command.
529 - Implement Console mtx commands.
530 - Add a default DB password to MySQL.
531 GRANT all privileges ON bacula.* TO bacula@localhost IDENTIFIED BY
534 - Implement a Mount Command and an Unmount Command where
535 the users could specify a system command to be performed
536 to do the mount, after which Bacula could attempt to
537 read the device. This is for Removeable media such as a CDROM.
538 - Most likely, this mount command would be invoked explicitly
539 by the user using the current Console "mount" and "unmount"
540 commands -- the Storage Daemon would do the right thing
541 depending on the exact nature of the device.
542 - As with tape drives, when Bacula wanted a new removable
543 disk mounted, it would unmount the old one, and send a message
544 to the user, who would then use "mount" as described above
545 once he had actually inserted the disk.
546 - Implement dump/print label to UA
547 - Implement disk spooling. Two parts: 1. Spool to disk then
548 immediately to tape to speed up tape operations. 2. Spool to
549 disk only when the tape is full, then when a tape is hung move
551 - Scratch Pool where the volumes can be re-assigned to any Pool.
552 - bextract is sending everything to the log file ****FIXME****
553 - Add Progress command that periodically reports the progress of
555 - Restrict characters permitted in a Resource name, and don't permit
557 - Allow multiple Storage specifications (or multiple names on
558 a single Storage specification) in the Job record. Thus a job
559 can be backed up to a number of storage devices.
560 - Implement some way for the File daemon to contact the Director
561 to start a job or pass its DHCP obtained IP number.
562 - Implement multiple Consoles.
563 - Implement a query tape prompt/replace feature for a console
565 Two jobs ready to go, first one blocked waiting for media
566 Cancel 2nd job ("waiting execution" one)
569 - Copy console @ code to gnome2-console
570 - Make AES the only encryption algorithm see
571 http://csrc.nist.gov/CryptoToolkit/aes/). It's
572 an officially adopted standard, has survived peer
573 review, and provides keys up to 256 bits.
574 - Think about how space could be freed up on a tape -- perhaps this
575 is a Merge or Compact feature that is needed.
576 - Modify FileSet, did not upgrade the current Increment job, but
577 waited for the next job to be upgraded.
578 - Take a careful look at SetACL http://setacl.sourceforge.net
579 - Implement a where command for the tree telling where a file
581 - Take a careful look at Level for the estimate command, maybe make
582 it a command line option.
583 - Add Volume name to "I cannot write on this volume because"
584 - Make tree walk routines like cd, ls, ... more user friendly
585 by handling spaces better.
586 - Write your PID file and chown root:wheel before drop.
587 - Make sure there is no symlink in a file before creating a
589 - Look at mktemp or mkstemp(3).
590 mktemp and mkstemp create files with predictable names too. That's
591 not the vulnerability. The vulnerability is in creating files without
592 using the O_EXCL flag, which means "only create this file if it doesn't
593 exist, including if the file is a dangling symlink."
595 It is *NOT* enough to do the equivalent of
597 if doesn't exist $filename
598 then create $filename
600 because between the test and the create another process could have
601 gotten the CPU and created the file. You must use atomic functions
602 (those that don't get interrupted by other processes) and O_EXCL is
603 the only way for this particular example.
604 - Automatically create pools, but instead of looking for what
605 in in Job records, walk through the pool resources.
606 - Check and double check tree code, why does it take so long?
607 - Add device name to "Current Volume not acceptable because ..."
608 - Make sure that Bacula rechecks the tape after the 20 min wait.
609 - Set IO_NOWAIT on Bacula TCP/IP packets.
610 - Try doing a raw partition backup and restore by mounting a
613 Yes, it would allow to highly automatic the request for new tapes. If a
614 tape is empty, bacula reads the barcodes (native or simulated), and if
615 an unused tape is found, it runs the label command with all the
616 necessary parameters.
618 By the way can bacula automatically "move" an empty/purged volume say
619 in the "short" pool to the "long" pool if this pool runs out of volume
621 - Eliminate orphaned jobs: dbcheck, normal pruning, delete job command.
622 Hm. Well, there are the remaining orphaned job records:
624 | 105 | Llioness Save | 0000-00-00 00:00:00 | B | D | 0 | 0 | f |
625 | 110 | Llioness Save | 0000-00-00 00:00:00 | B | I | 0 | 0 | f |
626 | 115 | Llioness Save | 2003-09-10 02:22:03 | B | I | 0 | 0 | A |
627 | 128 | Catalog Save | 2003-09-11 03:53:32 | B | I | 0 | 0 | C |
628 | 131 | Catalog Save | 0000-00-00 00:00:00 | B | I | 0 | 0 | f |
630 As you can see, three of the five are failures. I already deleted the
631 one restore and one other failure using the by-client option. Deciding
632 what is an orphaned job is a tricky problem though, I agree. All these
633 records have or had 0 files/ 0 bytes, except for the restore. With no
634 files, of course, I don't know of the job ever actually becomes
635 associated with a Volume.
637 (I'm not sure if this is documented anywhere -- what are the meanings of
638 all the possible JobStatus codes?)
640 Looking at my database, it appears to me as though all the "orphaned"
641 jobs fit into one of two categories:
643 1) The Job record has a StartTime but no EndTime, and the job is not
646 2) The Job record has an EndTime, indicating that it completed, but
647 it has no associated JobMedia record.
650 This does suggest an approach. If failed jobs (or jobs that, for some
651 other reason, write no files) are associated with a volume via a
652 JobMedia record, then they should be purged when the associated volume
653 is purged. I see two ways to handle jobs that are NOT associated with a
656 1) purge them automatically whenever any volume is manually purged;
658 2) add an option to the purge command to manually purge all jobs with
659 no associated volume.
661 I think Restore jobs also fall into category 2 above .... so one might
662 want to make that "The Job record has an EndTime,, but no associated
663 JobMedia record, and is not a Restore job."
664 - make "btape /tmp" work.
665 - Make sure a rescheduled job is properly reported by status.
666 - Walk through the Pool records rather than the Job records
667 in dird.c to create/update pools.
668 - What to do about "list files job=xxx".
669 - When job rescheduled, status gives is waiting for Client Rufus
670 to connect to Storage File. Dir needs to inform SD that job
672 - Make Dmsg look at global before calling subroutine.
673 - Enable trace output at runtime for Win32
674 - Available volumes for autochangers (see patrick@baanboard.com 3 Sep 03
675 and 4 Sep) scan slots.
676 - Get and test MySQL 4.0
677 - Do a complete audit of all pthreads_mutex, cond, ... to ensure that
678 any that are dynamically initialized are destroyed when no longer used.
679 - Look at how fuser works and /proc/PID/fd that is how Nic found the
680 file descriptor leak in Bacula.
681 - Implement WrapCounters in Counters.
682 - Turn on SIGHUP in dird.c and test.
683 - Use system dependent calls to get more precise info on tape errors.
684 - Add heartbeat from FD to SD if hb interval expires.
685 - Suppress read error on blank tape when doing a label.
686 - Can we dynamically change FileSets?
687 - If pool specified to label command and Label Format is specified,
688 automatically generate the Volume name.
689 - Why can't SQL do the filename sort for restore?
690 - Look at libkse (man kse) for FreeBSD threading.
691 - Look into Microsoft Volume Shadowcopy Service VSS for backing
692 up system state components (Active Directory, System Volume, ...)
693 - Add ExhautiveRestoreSearch
694 - Look at the possibility of loading only the necessary
695 data into the restore tree (i.e. do it one directory at a
696 time as the user walks through the tree).
697 - Possibly use the hash code if the user selects all for a restore command.
698 - Orphaned Dir buffer at parse_conf.c:373 => store_dir
699 - Fix "restore all" to bypass building the tree.
700 - Prohibit backing up archive device (findlib/find_one.c:128)
701 - Implement Release Device in the Job resource to unmount a drive.
702 - Implement Acquire Device in the Job resource to mount a drive,
703 be sure this works with admin jobs so that the user can get
704 prompted to insert the correct tape. Possibly some way to say to
705 run the job but don't save the files.
706 - Implement FileOptions (see end of this document)
707 - Make things like list where a file is saved case independent for
710 - Bacula needs to propagate SD errors.
711 > > cluster-dir: Start Backup JobId 252, Job=REUTERS.2003-08-11_15.04.12
712 > > prod4-sd: REUTERS.2003-08-11_15.04.12 Error: Write error on device
713 /dev/nst0. ERR=Input/output error.
714 > > prod4-sd: REUTERS.2003-08-11_15.04.12 Error: Re-read of last block failed.
715 Last block=5162 Current block=5164.
716 > > prod4-sd: End of medium on Volume "REU007" Bytes=16,303,521,933
718 - Use autochanger to handle multiple devices.
719 - Add SuSE install doc to list.
720 - Check and rechedk "Invalid block number"
721 - Make bextract release the drive properly between tapes
722 so that an autochanger can be made to work.
723 - User wants to NOT backup up certain big files (email files).
724 - Maybe remove multiple simultaneous devices code in SD.
725 - On Windows with very long path names, it may be impossible to create
726 a file (and thus restore it) because the total length is too long.
727 We must cd into the directory then create the file without the
729 - lstat() is not going to work on Win32 for testing date.
730 - Implement a Recycle command
731 - Add client name to cram-md5 challenge so Director can immediately
732 verify if it is the correct client.
733 - Add JobLevel in FD status (but make sure it is defined).
734 - Audit all UA commands to ensure that we always prompt where possible.
735 - Check Jmsg in bnet, may not work, must dup bsock.
736 - Suppress Job Name in Jmsg for console
737 - Create Pools that are referenced in a Run statement at startup if possible.
738 - Use runbeforejob to unload, then reload a volume previously used,
739 then the next job run gets an error reading the drive.
740 - Make bootstrap filename unique.
741 - Test a second language e.g. french.
742 - Start working on Base jobs.
743 - Make "make binary-release" work from any directory.
744 - Implement UnsavedFiles DB record.
745 - Implement argc/argv for daemon command line scanning using table driven
747 - Implement table driven single argc/argv scanner to pickup all arguments.
748 Much like xxx_conf.c scan table.
749 keyword, handler(store_routine), store_address, code, flags, default.
750 - From Phil Stracchino:
751 It would probably be a per-client option, and would be called
752 something like, say, "Automatically purge obsoleted jobs". What it
753 would do is, when you successfully complete a Differential backup of a
754 client, it would automatically purge all Incremental backups for that
755 client that are rendered redundant by that Differential. Likewise,
756 when a Full backup on a client completed, it would automatically purge
757 all Differential and Incremental jobs obsoleted by that Full backup.
758 This would let people minimize the number of tapes they're keeping on
759 hand without having to master the art of retention times.
760 - Implement a M_SECURITY message class.
761 - When doing a Backup send all attributes back to the Director, who
762 would then figure out what files have been deleted.
763 - Currently in mount.c:236 the SD simply creates a Volume. It should have
764 explicit permission to do so. It should also mark the tape in error
765 if there is an error.
766 - Make sure all restore counters are working correctly in the FD.
767 - SD Bytes Read is wrong.
768 - Look at ALL higher level routines that call block.c to be sure
769 they don't expect something in errmsg.
770 - Investigate doing RAW backup of Win32 partition.
771 - Add thread specific data to hold the jcr -- send error messages from
772 low level routines by accessing it and using Jmsg().
773 - Cancel waiting for Client connect in SD if FD goes away.
775 - Examine Bare Metal restore problem (a FD crash exists somewhere ...).
776 - Implement timeout in response() when it should come quickly.
777 - Implement console @echo command.
778 - Implement a Slot priority (loaded/not loaded).
779 - Implement "vacation" Incremental only saves.
780 - Implement single pane restore (much like the Gftp panes).
781 - Implement Automatic Mount even in operator wait.
782 - Implement create "FileSet"?
783 - Fix watchdog pthread crash on Win32 (this is pthread_kill() Cygwin bug)
784 - Implement "scratch pool" where tapes are defined and can be
785 taken by any pool that needs them.
786 - Implement restore "current system", but take all files without
787 doing selection tree -- so that jobs without File records can
789 - Add prefixlinks to where or not where absolute links to FD.
790 - Issue message to mount a new tape before the rewind.
791 - Simplified client job initiation for portables.
792 - If SD cannot open a drive, make it periodically retry.
793 - Add more of the config info to the tape label.
795 - If tape is marked read-only, then try opening it read-only rather than
796 failing, and remember that it cannot be written.
797 - Refine SD waiting output:
798 Device is being positioned
799 > Device is being positioned for append
800 > Device is being positioned to file x
802 - Figure out some way to estimate output size and to avoid splitting
803 a backup across two Volumes -- this could be useful for writing CDROMs
804 where you really prefer not to have it split -- not serious.
805 - Have SD compute MD5 or SHA1 and compare to what FD computes.
806 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
807 actual data on the Volume and compare it.
808 - Implement Bacula plugins -- design API
809 - Make bcopy read through bad tape records.
810 - Program files (i.e. execute a program to read/write files).
811 Pass read date of last backup, size of file last time.
812 - Add Signature type to File DB record.
813 - CD into subdirectory when open()ing files for backup to
814 speed up things. Test with testfind().
815 - Priority job to go to top of list.
816 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
817 - Implement some way for the Console to dynamically create a job.
818 - Restore to a particular time -- e.g. before date, after date.
819 - Solaris -I on tar for include list
820 - Need a verbose mode in restore, perhaps to bsr.
821 - bscan without -v is too quiet -- perhaps show jobs.
822 - Add code to reject whole blocks if not wanted on restore.
823 - Check if we can increase Bacula FD priorty in Win2000
824 - Make sure the MaxVolFiles is fully implemented in SD
825 - Check if both CatalogFiles and UseCatalog are set to SD.
826 - Figure out how to do a bare metal Windows restore
827 - Possibly add email to Watchdog if drive is unmounted too
828 long and a job is waiting on the drive.
829 - Restore program that errs in SD due to no tape, reports
830 OK incorrectly in output.
831 - After unmount, if restore job started, ask to mount.
832 - Convert all %x substitution variables, which are hard to remember
833 and read to %(variable-name). Idea from TMDA.
834 - Remove NextId for SQLite. Optimize.
835 - Move all SQL statements into a single location.
836 - Add UA rc and history files.
837 - put termcap (used by console) in ./configure and
838 allow -with-termcap-dir.
839 - Fix Autoprune for Volumes to respect need for full save.
840 - Fix Win32 config file definition name on /install
841 - Compare tape to Client files (attributes, or attributes and data)
842 - Make all database Ids 64 bit.
843 - Write an applet for Linux.
844 - Allow console commands to detach or run in background.
845 - Fix status delay on storage daemon during rewind.
846 - Add SD message variables to control operator wait time
847 - Maximum Operator Wait
848 - Minimum Message Interval
849 - Maximum Message Interval
850 - Send Operator message when cannot read tape label.
851 - Verify level=Volume (scan only), level=Data (compare of data to file).
852 Verify level=Catalog, level=InitCatalog
854 - Add keyword search to show command in Console.
855 - Events : tape has more than xxx bytes.
856 - Complete code in Bacula Resources -- this will permit
857 reading a new config file at any time.
858 - Handle ctl-c in Console
859 - Implement script driven addition of File daemon to config files.
860 - Think about how to make Bacula work better with File (non-tape) archives.
861 - Write Unix emulator for Windows.
862 - Put memory utilization in Status output of each daemon
863 if full status requested or if some level of debug on.
864 - Make database type selectable by .conf files i.e. at runtime
865 - Set flag for uname -a. Add to Volume label.
866 - Implement throttled work queue.
867 - Restore files modified after date
868 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
869 - Implement Restore FileSet=
870 - Create a protocol.h and protocol.c where all protocol messages
872 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
873 - Timout a job or terminate if link goes down, or reopen link and query.
874 - Concept of precious tapes (cannot be reused).
875 - Make bcopy copy with a single tape drive.
876 - Permit changing ownership during restore.
879 > My suggestion: Add a feature on the systray menu-icon menu to request
880 > an immediate backup now. This would be useful for laptop users who may
881 > not be on the network when the regular scheduled backup is run.
883 > My wife's suggestion: Add a setting to the win32 client to allow it to
884 > shut down the machine after backup is complete (after, of course,
885 > displaying a "System will shut down in one minute, click here to cancel"
886 > warning dialog). This would be useful for sites that want user
887 > woorkstations to be shut down overnight to save power.
890 - Autolabel should be specified by DIR instead of SD.
893 - AutoScan (check checksum of tape)
894 - Format command = "format /dev/nst0"
898 - Seek resolution (usually corresponds to buffer size)
899 - EODErrorCode=ENOSPC or code
900 - Partial Read error code
901 - Partial write error code
902 - Nonformatted read error
903 - Nonformatted write error
904 - WriteProtected error
908 - IgnoreCloseErrors=yes
918 - FD sends unsaved file list to Director at end of job (see
920 - File daemon should build list of files skipped, and then
921 at end of save retry and report any errors.
922 - Write a Storage daemon that uses pipes and
923 standard Unix programs to write to the tape.
925 - Need something that monitors the JCR queue and
926 times out jobs by asking the deamons where they are.
927 - Enhance Jmsg code to permit buffering and saving to disk.
928 - device driver = "xxxx" for drives.
930 - Ensure that /dev/null works
931 - Need report class for messages. Perhaps
932 report resource where report=group of messages
933 - enhance scan_attrib and rename scan_jobtype, and
934 fill in code for "since" option
935 - Director needs a time after which the report status is sent
936 anyway -- or better yet, a retry time for the job.
937 - Don't reschedule a job if previous incarnation is still running.
938 - Some way to automatically backup everything is needed????
939 - Need a structure for pending actions:
941 - termination status (part of buffered msgs?)
943 Read, Write, Clean, Delete
944 - Login to Bacula; Bacula users with different permissions:
945 owner, group, user, quotas
946 - Store info on each file system type (probably in the job header on tape.
947 This could be the output of df; or perhaps some sort of /etc/mtab record.
950 - Design at hierarchial storage for Bacula. Migration and Clone.
951 - Implement FSM (File System Modules).
952 - Audit M_ error codes to ensure they are correct and consistent.
953 - Add variable break characters to lex analyzer.
954 Either a bit mask or a string of chars so that
955 the caller can change the break characters.
956 - Make a single T_BREAK to replace T_COMMA, etc.
957 - Ensure that File daemon and Storage daemon can
958 continue a save if the Director goes down (this
959 is NOT currently the case). Must detect socket error,
960 buffer messages for later.
961 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
962 - Add ability to backup to two Storage devices (two SD sessions) at
963 the same time -- e.g. onsite, offsite.
964 - Add the ability to consolidate old backup sets (basically do a restore
965 to tape and appropriately update the catalog). Compress Volume sets.
966 Might need to spool via file is only one drive is available.
967 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
968 someway to do so with every volume that has less than x% valid
972 Migration: Move a backup from one Volume to another
973 Clone: Copy a backup -- two Volumes
975 Bacula Migration is based on Jobs (apparently Networker is file by file).
977 Migration triggered by:
981 Highwater mark (keep total size)
986 ======================================================
988 It is somewhat like a Full save becomes an incremental since
989 the Base job (or jobs) plus other non-base files.
991 - A Base backup is same as Full backup, just different type.
992 - New BaseFiles table that contains:
994 BaseJobId - Base JobId referenced for this FileId (needed ???)
995 JobId - JobId currently running
996 FileId - File not backed up, exists in Base Job
997 FileIndex - FileIndex from Base Job.
998 i.e. for each base file that exists but is not saved because
999 it has not changed, the File daemon sends the JobId, BaseId,
1000 FileId, FileIndex back to the Director who creates the DB entry.
1001 - To initiate a Base save, the Director sends the FD
1002 the FileId, and full filename for each file in the Base.
1003 - When the FD finds a Base file, he requests the Director to
1004 send him the full File entry (stat packet plus MD5), or
1005 conversely, the FD sends it to the Director and the Director
1006 says yes or no. This can be quite rapid if the FileId is kept
1007 by the FD for each Base Filename.
1008 - It is probably better to have the comparison done by the FD
1009 despite the fact that the File entry must be sent across the
1011 - An alternative would be to send the FD the whole File entry
1012 from the start. The disadvantage is that it requires a lot of
1013 space. The advantage is that it requires less communications
1015 - The Job record must be updated to indicate that one or more
1017 - At end of Job, FD returns:
1018 1. Count of base files/bytes not written to tape (i.e. matches)
1019 2. Count of base file that were saved i.e. had changed.
1020 - No tape record would be written for a Base file that matches, in the
1021 same way that no tape record is written for Incremental jobs where
1022 the file is not saved because it is unchanged.
1023 - On a restore, all the Base file records must explicitly be
1024 found from the BaseFile tape. I.e. for each Full save that is marked
1025 to have one or more Base Jobs, search the BaseFile for all occurrences
1027 - An optimization might be to make the BaseFile have:
1033 This would avoid the need to explicitly fetch each File record for
1034 the Base job. The Base Job record will be fetched to get the
1035 VolSessionId and VolSessionTime.
1036 =========================================================
1039 ==========================================================
1041 For each Incremental job that is run, there may be files that
1042 were found but not saved because they were locked (this applies
1043 only to Windows). Such a system could send back to the Director
1044 a list of Unsaved files.
1046 - New UnSavedFiles table that contains:
1050 - Then in the next Incremental job, the list of Unsaved Files will be
1051 feed to the FD, who will ensure that they are explicitly chosen even
1052 if standard date/time check would not have selected them.
1053 =============================================================
1056 Done: (see kernsdone for more)
1059 - John's Full save failed with 1.32c FD and 1.31 Dir no FD status,
1060 and no error message.
1061 - Add fd and st as Console keywords.
1062 - Recycling volume with a Slot requires an operator intervention:
1063 rufus-dir: Start Backup JobId 18, Job=kernsave.2003-11-01_21.23.52
1064 rufus-dir: Pruned 1 Job on Volume Vol01 from catalog.
1065 rufus-dir: There are no Jobs associated with Volume Vol01. Marking it purged.
1066 rufus-dir: Recycled volume "Vol01"
1067 rufus-sd: Please mount Volume "Vol01" on Storage Device "DDS-4" for Job kernsave.2003-11-01_21.23.52
1068 Use "mount" command to release Job.
1069 - Implement Dan's bacula script (email of 26 Oct).
1070 - Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
1071 - Edit the Client/Storage name into authentication failure messages.
1072 - Fix packet too big problem. This is most likely a Windows TCP stack
1074 - Implement ClientRunBeforeJob and ClientRunAfterJob.
1075 - Implement forward spacing block/file: position_device(bsr) --
1076 just before read_block_from_device();
1079 Multiple drive autochanger data: see Alan Brown
1080 mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
1081 Unloading Data Transfer Element into Storage Element 1...source Element
1082 Address 480 is Empty
1084 (drive 0 was empty and so was slot 1)
1085 > mtx -f xxx load 15 0
1086 no response, just returns to the command prompt when complete.
1087 > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
1088 Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
1089 Data Transfer Element 1:Empty
1090 Storage Element 1:Empty
1091 Storage Element 2:Full :VolumeTag=HX002
1092 Storage Element 3:Full :VolumeTag=HX003
1093 Storage Element 4:Full :VolumeTag=HX004
1094 Storage Element 5:Full :VolumeTag=HX005
1095 Storage Element 6:Full :VolumeTag=HX006
1096 Storage Element 7:Full :VolumeTag=HX007
1097 Storage Element 8:Full :VolumeTag=HX008
1098 Storage Element 9:Full :VolumeTag=HX009
1099 Storage Element 10:Full :VolumeTag=HX010
1100 Storage Element 11:Empty
1101 Storage Element 12:Empty
1102 Storage Element 13:Empty
1103 Storage Element 14:Empty
1104 Storage Element 15:Empty
1105 Storage Element 16:Empty....
1106 Storage Element 28:Empty
1107 Storage Element 29:Full :VolumeTag=CLNU01L1
1108 Storage Element 30:Empty....
1109 Storage Element 57:Empty
1110 Storage Element 58:Full :VolumeTag=NEX261L2
1111 Storage Element 59 IMPORT/EXPORT:Empty
1112 Storage Element 60 IMPORT/EXPORT:Empty
1114 Unloading Data Transfer Element into Storage Element 15...done
1116 (just to verify it remembers where it came from, however it can be
1117 overrriden with mtx unload {slotnumber} to go to any storage slot.)
1119 There needs to be a table of drive # to devices somewhere - If there are
1120 multiple changers or drives there may not be a 1:1 correspondance between
1121 changer drive number and system device name - and depending on the way the
1122 drives are hooked up to scsi busses, they may not be linearly numbered
1123 from an offset point either.something like
1125 Autochanger drives = 2
1126 Autochanger drive 0 = /dev/nst1
1127 Autochanger drive 1 = /dev/nst2
1128 IMHO, it would be _safest_ to use explicit mtx unload commands at all
1129 times, not just for multidrive changers. For a 1 drive changer, that's
1135 MTX's manpage (1.2.15):
1136 unload [<slotnum>] [ <drivenum> ]
1137 Unloads media from drive <drivenum> into slot
1138 <slotnum>. If <drivenum> is omitted, defaults to
1139 drive 0 (as do all commands). If <slotnum> is
1140 omitted, defaults to the slot that the drive was
1141 loaded from. Note that there's currently no way
1142 to say 'unload drive 1's media to the slot it
1143 came from', other than to explicitly use that
1144 slot number as the destination.AB
1150 undef# camcontrol devlist
1151 <WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
1152 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
1153 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
1155 tapeinfo -f /dev/sg0 with a bad tape in drive 1:
1156 [kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
1157 Product Type: Tape Drive
1159 Product ID: 'C5713A '
1161 Attached Changer: No
1162 TapeAlert[3]: Hard Error: Uncorrectable read/write error.
1163 TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
1170 Medium Type: Not Loaded
1173 DataCompEnabled: yes
1174 DataCompCapable: yes
1175 DataDeCompEnabled: yes
1182 Handling removable disks
1184 From: Karl Cunningham <karlc@keckec.com>
1186 My backups are only to hard disk these days, in removable bays. This is my
1187 idea of how a backup to hard disk would work more smoothly. Some of these
1188 things Bacula does already, but I mention them for completeness. If others
1189 have better ways to do this, I'd like to hear about it.
1191 1. Accommodate several disks, rotated similar to how tapes are. Identified
1192 by partition volume ID or perhaps by the name of a subdirectory.
1193 2. Abort & notify the admin if the wrong disk is in the bay.
1194 3. Write backups to different subdirectories for each machine to be backed
1196 4. Volumes (files) get created as needed in the proper subdirectory, one
1198 5. When a disk is recycled, remove or zero all old backup files. This is
1199 important as the disk being recycled may be close to full. This may be
1200 better done manually since the backup files for many machines may be
1201 scattered in many subdirectories.
1206 - To pass Include 1 or two letter commands
1207 I Name Include name - first record
1208 B Name Base name - repeat
1211 E zzz Exclude expression (wild card)
1213 D "reader" Reader program
1214 T "writer" Writer program
1215 O Options In current commpressed format
1216 (compression, signature, onefs, recurse, sparse,
1217 replace, verify options, ...)
1219 B BaseName Start second option set any letter
1222 F Number Number of filenames to follow
1227 F Number Number of filenames to follow
1230 - Add regression of btape "fill"
1232 - Implement "label slots=1,2... pool=yyy barcodes"
1233 - Mark a non-removable disk Volume in error rather than asking sys op to
1235 - Implement Fixed storage LabelFormat test.
1236 - Add reporting in attr despooling.
1237 - Figure out how to use ssh or stunnel to protect Bacula communications.
1238 Add Dan's work to manual See ssl.txt
1241 - Implement fast tree insert (doubly linked list)
1242 - Disallow using Internal database
1243 - Feedback while the restore tree is being built.
1244 - Add detection of Whitebox release in ./configure
1245 - Add InChanger to "list media"
1246 - Implement second cut of SIGHUP in Dir
1247 (Implement resources on a single pointer)
1248 - Add regular expressions to FileSets (needs testing).
1249 - Test new despooling error recovery code when partition fills.
1250 - Sort Scheduled jobs status listing by start time.
1251 - Add priority to Scheduled jobs status listing.
1252 - Look at Win32 inc problem when new directory added files not saved???
1253 - Require resource names to be unique.
1254 - Make sure that all errors from libacl are printed.
1255 - Make FD run on Win95 if possible (not really possible).
1256 - Fix GROUP BYs in all SQL (done by Dan -- thanks)
1257 - Make entering multiple Storage names in Dir illegal.
1258 - Make btape release the drive during the "test" append.
1260 You have selected the following JobIds: 739,856,797
1261 Building directory tree for JobId 739 ...
1262 Building directory tree for JobId 856 ...
1263 Building directory tree for JobId 797 ...3
1264 Jobs inserted into the tree.
1265 - Fix errno handling in win32 compat routines.
1266 - Add better error codes to run_program (10000+)
1267 - Revisit and revise Disaster Recovery (fix SCSI and RAID
1269 - When passwords do not match, print message that points the
1271 - Do tape alerts -- see tapealert.txt
1272 - Find memory leaks in address_conf.c
1273 - Network order of port and ip addresses.
1274 - SetIP in dird/fd_cmds.c is broken.
1275 - don't use inet_addr() it is deprecated.
1276 - Fix code in filed.c for init_bsock();
1277 - Fix code in console.c for init_bsock();
1278 - Solve the termcap.h problem on Solaris configure.
1279 - Make Verify jobs require exclusive use of Volume as Restore
1281 - Fix restore ++++ that get intermingled with "Building directory tree"
1282 - Fix doc in dirdconf.html for @, where the file must
1283 have not a list of files, but
1286 - Test Win32 errno handling.
1287 - port 1.34.6-block.patch to 1.35
1288 - Look at Chris' patch for bscan bug.
1289 - Fix error handling in spooling both data and attribute.
1290 - Implement Ignore FileSet Change.