1 Technical notes on version 1.38
8 - Simplify code in askdir.c that waits for creating an appendable
9 volume so that it can handle multiple returns from the wait
11 - Modify the wait code to permit multiple returns.
12 - Return a zero when "autochanger drives" is called and
13 it is not an autochanger.
14 - Make rewind_dev() a method taking a DCR as an argument.
15 This permits closing and reopening the drive if the
16 rewind fails as happens if the drive was loaded while the
17 file descriptor was open. This refreshes the file descriptor.
18 - Remove the ST_OPENED flag and always rely on fd < 0 for knowing
19 if the device is open or not. This should eliminate
21 - Return error if reserve cannot find at least one suitable device.
22 - Make wait_for_sysop() return correct state information.
23 - Fix Win32 state file problem. write was not using compat
24 code. This should fix bug #500.
26 - Modify gui on command to set only GUI mode and not batch.
27 - Modify .messages command to always print messages regardless
29 - If GUI mode is on, suppress automatic printing of
31 - Delete old bnet packet code.
32 - Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
34 - Modify restore command in wx-console to set gui on and to use
35 only .messages instead of messages. Hopefully this fixes bug
39 - Fix seg fault in exit of acquire when canceling a job --
40 reported by Wolfgang Denk
42 - Implement load balancing code.
43 - Pull a few files from 1.39 where we can maintain compatibility.
44 - Rewrite reservation algorithm again. Rename variables to be
45 more logical, add HEARTBEAT with Director, allow cancel of
46 jobs stuck in reservation, add last resourt any_drive.
48 - Remove quotes from Version table name -- it breaks things.
49 - Fix seg fault if user labels a drive directly bug #513
50 - Remove quotes around Version as it breaks things.
52 - Merge in Aleksandar Milivojevic's mods to the spec file.
53 - Apply sparse code fix for raw drives and fifos. Bug 506
54 - Thorsten fixed Unicode cd problem with wx-console bug 505.
57 - Correct reservation system to do a last ditch try
58 for any mounted volume, then anyone anywhere.
59 - Add quotes around table Version because of
60 error in MySQL 4.1.15 -- bug report submitted.
61 - Correct some minor problems with btape in the fill
63 - Updates to ssh-tunnel from Joshua Kugler.
64 - Added a report.pl program from Jonas Bjorklund.
65 - Simplify the O_NONBLOCK open() code for tape drives,
66 and always open nonblocking.
67 - Do not wait for open() if EIO returned (shouldn't happen).
68 - Eliminate 3 argument to tape open().
69 - Correct the slot # edited in the 3995 Bad autochanger unload
71 - With -S on bscan (show progress) do not divide by zero.
74 - Make cancel pthread_cond_signal() pthread_cond_broadcast().
75 - When dcr is freed, also broadcast dev->wait_next_vol signal.
76 - Remove unused code in wait_for_device.
77 - Make wait_for_device() always return after 60 seconds of wait.
79 - Use localhost if no network configured
81 - Eliminated duplicate MaxVolBytes in cat update -- bug 509.
83 - Add bail_out in error during state file reading.
86 - Merge updates into 1.38 branch
87 - Update specs to include mysql4 define.
88 - Stop read_record() if status not ok in second loop.
89 - Return rec->FileIndex in dcr->VolLastIndex for normal
90 and partial records in read_record(). This allows bscan
91 to get FileIndex at EOT correct.
92 - Fix butil.c to correctly set dcr -- fixes seg fault in bls.
94 - Apply patch supplied by user (slightly modified) to fix
95 correct detection of holes in block devices and FIFOs.
97 - Apply patch supplied by user (slightly modified)
98 to fix SD hang with multiple pools and bad client
101 - Add nagios plugin to the examples directory. Submitted by
103 - Remove warning message about multiple saves of hardlinked files
104 from find_one.c as it can generate too many warning messages.
106 - Reset timeout values before select() per patch from
107 Frank Sweetser for problems with non-blocking sockets.
108 - Unlink the state file if either reading or writing it gets
109 errors. Hopefully this will fix Win32 exit problems.
110 - Add sanity check in append.c to ensure that dcr is not NULL.
111 This can happen if multiple drive autochanger SCSI control
112 channel and drive indicies do not correspond.
114 - Get next volume from Scratch pool before creating a volume.
115 - Set new Pool defaults in Vol when moved from Scratch Pool.
116 - Remove argument from create_bacula_database for SQLite as it
118 - Add back next_vol index code so that two drive autochangers can get
120 - Change a bunch of debug levels to aid debugging autochangers.
121 - Fix reservation so that mutexes are properly applied.
122 - Rework reservation algorithm so that two drives can be used
125 - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
126 If this patch is applied, the number of days can be specified with
127 "list nextvol days=xx"
130 My use case is to be able to preview the next scheduled job (and the
131 next tape to be used) on fridays if there are no scheduled jobs during
134 - Fix font code in gnome2 console user patch. Fixes bug #501.
135 - Fix malformatted bnet error message that caused seg fault
137 - Applied user patch to improve README.vc8 in src/win32.
139 - Correct some more editing of JobId's (for 64 bit compatibility).
140 - Ensure that StorageId is stored in Media record when ever possible.
141 - Add Migration Job to Job.
142 - Change Start Storage daemon job to require read and write storage
144 - Pass read storage data to SD as well as write storage data.
145 - Remove old code from winservice.cpp
146 - Break on error in scan.
147 - Fix typo in signal.c
148 - Separate read/write DCR in SD. Add jcr->read_dcr.
149 - Cleanup how find_device() works.
150 - Add read output to Status in SD.
152 - Remove abs() in bfile.c so that it compiles on Solaris.
155 Changes to 1.38.2: 22 November 2005
157 - Fix crash in tray-monitor when daemon disconnects. Bug #479.
158 - Fix bnet-server bug found on OpenBSD. Bug #486 (bug originator
159 says this does not fix *his* bug).
160 - Fix cancel failure bug. Bug #481
161 - Fix failure when Pool name has spaces. Bug #487
162 - Fix SD crash in autochanger code. Mutex failure. Bug #488
163 - Fix a couple of free()s in src/filed/acl.c
164 - Fix memory overrun in bfile.c in building OS X resource
165 fork filename. Bug #489
166 - Add Pool name to SD status output.
167 - Add Python install dir for Solaris to configure. Bug #492
169 Changes to 1.38.1: 15 November 2005
171 - Apply SunOS patch for ACLs submitted by David Duchscher.
172 - Make sure to set storage before trying to set drive.
173 - Add bacula_mail_summary.sh to examples directory. It makes
174 a single email summary of any number of jobs. Submitted
176 - Make sure when we do a mount to unblock the device even
177 if the drive could not be opened.
179 - Merge Scott's new spec files.
180 - Add doc on setting up Win32 environment variable supplied
181 by Kees van den Broek.
182 - Turn off API debug output unless debug set to avoid confusing
184 - Add Solaris ACL detection in configure.in as supplied by
187 - Implement "autochanger drives" protocol so that Dir knows
188 how many drives an autochanger has.
189 - Do not request drive number in label, ... if only one drive.
190 - Turn off debug code.
191 - Fix update slots to clear slot number of every slot before
192 setting it. This fixes (I believe) bug #471
193 - Make unmount unload the autochanger slot.
194 - Modify open() on mount to be read-only and non-blocking,
195 otherwise the mount can block for a long time.
196 - Make a few error message numbers unique.
197 - Make a few error messages more correct.
198 - Apply patch from Thorsten to fix Win98 stat() command.
200 - Remove delete of CVS from all makefiles.
201 - Fix seg fault when clicking on Add button in wx-console
202 restore panel. Bug #470.
203 - Fix copyright date and URL typo -- bug #468.
204 - Change autostart install for FreeBSD to look for rc.conf
205 rather than rc.local as suggested fix for bug #466.
206 - Apply patch supplied by Eric Bollinger to fix PostgreSQL
207 grant on status. Bug #465
208 - Apply patch supplied by Eric Bollinger to fix PostgreSQL
209 update script. Bug #464
210 - Fix off by one for last Slot of autochanger for label.
211 - Update release date.
212 - Tweak an authentication error message in dir.
213 - Fix autoloader so that mutex is set and released around
214 each run_program(). There was a missing set.
215 - Remove an unnecessary drive release in autochanger.
216 - Modify configure.in to add execute option to sqlite3 catalog
218 - Create update_xxx_table_8_to_9 scripts for updatedb
219 - Fix wrong variable in bpipe.c debug output reported by user.
220 - Fix improper placement of encode_and_send_attributes() in
221 FD backup.c causing first file of non-portable Win32 backup
222 to have wrong stream. Reported by Thorsten.
223 - Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
224 autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
225 - Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
226 by user. Fixes bug #456.
228 Released 1.38.0 (28Oct05): 31 October 2005