1 Technical notes on version 1.38
9 - Implement load balancing code.
10 - Pull a few files from 1.39 where we can maintain compatibility.
11 - Rewrite reservation algorithm again. Rename variables to be
12 more logical, add HEARTBEAT with Director, allow cancel of
13 jobs stuck in reservation, add last resourt any_drive.
15 - Remove quotes from Version table name -- it breaks things.
16 - Fix seg fault if user labels a drive directly bug #513
17 - Remove quotes around Version as it breaks things.
19 - Merge in Aleksandar Milivojevic's mods to the spec file.
20 - Apply sparse code fix for raw drives and fifos. Bug 506
21 - Thorsten fixed Unicode cd problem with wx-console bug 505.
24 - Correct reservation system to do a last ditch try
25 for any mounted volume, then anyone anywhere.
26 - Add quotes around table Version because of
27 error in MySQL 4.1.15 -- bug report submitted.
28 - Correct some minor problems with btape in the fill
30 - Updates to ssh-tunnel from Joshua Kugler.
31 - Added a report.pl program from Jonas Bjorklund.
32 - Simplify the O_NONBLOCK open() code for tape drives,
33 and always open nonblocking.
34 - Do not wait for open() if EIO returned (shouldn't happen).
35 - Eliminate 3 argument to tape open().
36 - Correct the slot # edited in the 3995 Bad autochanger unload
38 - With -S on bscan (show progress) do not divide by zero.
41 - Make cancel pthread_cond_signal() pthread_cond_broadcast().
42 - When dcr is freed, also broadcast dev->wait_next_vol signal.
43 - Remove unused code in wait_for_device.
44 - Make wait_for_device() always return after 60 seconds of wait.
46 - Use localhost if no network configured
48 - Eliminated duplicate MaxVolBytes in cat update -- bug 509.
50 - Add bail_out in error during state file reading.
53 - Merge updates into 1.38 branch
54 - Update specs to include mysql4 define.
55 - Stop read_record() if status not ok in second loop.
56 - Return rec->FileIndex in dcr->VolLastIndex for normal
57 and partial records in read_record(). This allows bscan
58 to get FileIndex at EOT correct.
59 - Fix butil.c to correctly set dcr -- fixes seg fault in bls.
61 - Apply patch supplied by user (slightly modified) to fix
62 correct detection of holes in block devices and FIFOs.
64 - Apply patch supplied by user (slightly modified)
65 to fix SD hang with multiple pools and bad client
68 - Add nagios plugin to the examples directory. Submitted by
70 - Remove warning message about multiple saves of hardlinked files
71 from find_one.c as it can generate too many warning messages.
73 - Reset timeout values before select() per patch from
74 Frank Sweetser for problems with non-blocking sockets.
75 - Unlink the state file if either reading or writing it gets
76 errors. Hopefully this will fix Win32 exit problems.
77 - Add sanity check in append.c to ensure that dcr is not NULL.
78 This can happen if multiple drive autochanger SCSI control
79 channel and drive indicies do not correspond.
81 - Get next volume from Scratch pool before creating a volume.
82 - Set new Pool defaults in Vol when moved from Scratch Pool.
83 - Remove argument from create_bacula_database for SQLite as it
85 - Add back next_vol index code so that two drive autochangers can get
87 - Change a bunch of debug levels to aid debugging autochangers.
88 - Fix reservation so that mutexes are properly applied.
89 - Rework reservation algorithm so that two drives can be used
92 - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
93 If this patch is applied, the number of days can be specified with
94 "list nextvol days=xx"
97 My use case is to be able to preview the next scheduled job (and the
98 next tape to be used) on fridays if there are no scheduled jobs during
101 - Fix font code in gnome2 console user patch. Fixes bug #501.
102 - Fix malformatted bnet error message that caused seg fault
104 - Applied user patch to improve README.vc8 in src/win32.
106 - Correct some more editing of JobId's (for 64 bit compatibility).
107 - Ensure that StorageId is stored in Media record when ever possible.
108 - Add Migration Job to Job.
109 - Change Start Storage daemon job to require read and write storage
111 - Pass read storage data to SD as well as write storage data.
112 - Remove old code from winservice.cpp
113 - Break on error in scan.
114 - Fix typo in signal.c
115 - Separate read/write DCR in SD. Add jcr->read_dcr.
116 - Cleanup how find_device() works.
117 - Add read output to Status in SD.
119 - Remove abs() in bfile.c so that it compiles on Solaris.
122 Changes to 1.38.2: 22 November 2005
124 - Fix crash in tray-monitor when daemon disconnects. Bug #479.
125 - Fix bnet-server bug found on OpenBSD. Bug #486 (bug originator
126 says this does not fix *his* bug).
127 - Fix cancel failure bug. Bug #481
128 - Fix failure when Pool name has spaces. Bug #487
129 - Fix SD crash in autochanger code. Mutex failure. Bug #488
130 - Fix a couple of free()s in src/filed/acl.c
131 - Fix memory overrun in bfile.c in building OS X resource
132 fork filename. Bug #489
133 - Add Pool name to SD status output.
134 - Add Python install dir for Solaris to configure. Bug #492
136 Changes to 1.38.1: 15 November 2005
138 - Apply SunOS patch for ACLs submitted by David Duchscher.
139 - Make sure to set storage before trying to set drive.
140 - Add bacula_mail_summary.sh to examples directory. It makes
141 a single email summary of any number of jobs. Submitted
143 - Make sure when we do a mount to unblock the device even
144 if the drive could not be opened.
146 - Merge Scott's new spec files.
147 - Add doc on setting up Win32 environment variable supplied
148 by Kees van den Broek.
149 - Turn off API debug output unless debug set to avoid confusing
151 - Add Solaris ACL detection in configure.in as supplied by
154 - Implement "autochanger drives" protocol so that Dir knows
155 how many drives an autochanger has.
156 - Do not request drive number in label, ... if only one drive.
157 - Turn off debug code.
158 - Fix update slots to clear slot number of every slot before
159 setting it. This fixes (I believe) bug #471
160 - Make unmount unload the autochanger slot.
161 - Modify open() on mount to be read-only and non-blocking,
162 otherwise the mount can block for a long time.
163 - Make a few error message numbers unique.
164 - Make a few error messages more correct.
165 - Apply patch from Thorsten to fix Win98 stat() command.
167 - Remove delete of CVS from all makefiles.
168 - Fix seg fault when clicking on Add button in wx-console
169 restore panel. Bug #470.
170 - Fix copyright date and URL typo -- bug #468.
171 - Change autostart install for FreeBSD to look for rc.conf
172 rather than rc.local as suggested fix for bug #466.
173 - Apply patch supplied by Eric Bollinger to fix PostgreSQL
174 grant on status. Bug #465
175 - Apply patch supplied by Eric Bollinger to fix PostgreSQL
176 update script. Bug #464
177 - Fix off by one for last Slot of autochanger for label.
178 - Update release date.
179 - Tweak an authentication error message in dir.
180 - Fix autoloader so that mutex is set and released around
181 each run_program(). There was a missing set.
182 - Remove an unnecessary drive release in autochanger.
183 - Modify configure.in to add execute option to sqlite3 catalog
185 - Create update_xxx_table_8_to_9 scripts for updatedb
186 - Fix wrong variable in bpipe.c debug output reported by user.
187 - Fix improper placement of encode_and_send_attributes() in
188 FD backup.c causing first file of non-portable Win32 backup
189 to have wrong stream. Reported by Thorsten.
190 - Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
191 autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
192 - Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
193 by user. Fixes bug #456.
195 Released 1.38.0 (28Oct05): 31 October 2005