2 Bacula® - The Network Backup Solution
4 Copyright (C) 2000-2010 Free Software Foundation Europe e.V.
6 The main author of Bacula is Kern Sibbald, with contributions from
7 many others, a complete list can be found in the file AUTHORS.
8 This program is Free Software; you can redistribute it and/or
9 modify it under the terms of version two of the GNU General Public
10 License as published by the Free Software Foundation and included
13 This program is distributed in the hope that it will be useful, but
14 WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 Bacula® is a registered trademark of Kern Sibbald.
24 The licensor of Bacula is the Free Software Foundation Europe
25 (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
26 Switzerland, email:ftf@fsfeurope.org.
30 * Bacula Director -- fd_cmds.c -- send commands to File daemon
32 * Kern Sibbald, October MM
34 * This routine is run as a separate thread. There may be more
35 * work to be done to make it totally reentrant!!!!
37 * Utility functions for sending info to File Daemon.
38 * These functions are used by both backup and verify.
44 #include "findlib/find.h"
46 const int dbglvl = 400;
48 /* Commands sent to File daemon */
49 static char filesetcmd[] = "fileset%s\n"; /* set full fileset */
50 static char jobcmd[] = "JobId=%s Job=%s SDid=%u SDtime=%u Authorization=%s\n";
51 /* Note, mtime_only is not used here -- implemented as file option */
52 static char levelcmd[] = "level = %s%s%s mtime_only=%d\n";
53 static char runscript[] = "Run OnSuccess=%u OnFailure=%u AbortOnError=%u When=%u Command=%s\n";
54 static char runbeforenow[]= "RunBeforeNow\n";
56 /* Responses received from File daemon */
57 static char OKinc[] = "2000 OK include\n";
58 static char OKjob[] = "2000 OK Job";
59 static char OKlevel[] = "2000 OK level\n";
60 static char OKRunScript[] = "2000 OK RunScript\n";
61 static char OKRunBeforeNow[] = "2000 OK RunBeforeNow\n";
63 /* Forward referenced functions */
64 static bool send_list_item(JCR *jcr, const char *code, char *item, BSOCK *fd);
66 /* External functions */
67 extern DIRRES *director;
68 extern int FDConnectTimeout;
74 * Open connection with File daemon.
75 * Try connecting every retry_interval (default 10 sec), and
76 * give up after max_retry_time (default 30 mins).
79 int connect_to_file_daemon(JCR *jcr, int retry_interval, int max_retry_time,
82 BSOCK *fd = new_bsock();
86 if (jcr->client->heartbeat_interval) {
87 heart_beat = jcr->client->heartbeat_interval;
89 heart_beat = director->heartbeat_interval;
92 if (!jcr->file_bsock) {
93 char name[MAX_NAME_LENGTH + 100];
94 bstrncpy(name, _("Client: "), sizeof(name));
95 bstrncat(name, jcr->client->name(), sizeof(name));
97 fd->set_source_address(director->DIRsrc_addr);
98 if (!fd->connect(jcr,retry_interval,max_retry_time, heart_beat, name, jcr->client->address,
99 NULL, jcr->client->FDport, verbose)) {
105 set_jcr_job_status(jcr, JS_ErrorTerminated);
108 Dmsg0(10, "Opened connection with File daemon\n");
110 fd = jcr->file_bsock; /* use existing connection */
112 fd->res = (RES *)jcr->client; /* save resource in BSOCK */
113 jcr->file_bsock = fd;
114 set_jcr_job_status(jcr, JS_Running);
116 if (!authenticate_file_daemon(jcr)) {
117 set_jcr_job_status(jcr, JS_ErrorTerminated);
122 * Now send JobId and authorization key
124 if (jcr->sd_auth_key == NULL) {
125 jcr->sd_auth_key = bstrdup("dummy");
127 fd->fsend(jobcmd, edit_int64(jcr->JobId, ed1), jcr->Job, jcr->VolSessionId,
128 jcr->VolSessionTime, jcr->sd_auth_key);
129 if (!jcr->keep_sd_auth_key && strcmp(jcr->sd_auth_key, "dummy")) {
130 memset(jcr->sd_auth_key, 0, strlen(jcr->sd_auth_key));
132 Dmsg1(100, ">filed: %s", fd->msg);
133 if (bget_dirmsg(fd) > 0) {
134 Dmsg1(110, "<filed: %s", fd->msg);
135 if (strncmp(fd->msg, OKjob, strlen(OKjob)) != 0) {
136 Jmsg(jcr, M_FATAL, 0, _("File daemon \"%s\" rejected Job command: %s\n"),
137 jcr->client->hdr.name, fd->msg);
138 set_jcr_job_status(jcr, JS_ErrorTerminated);
140 } else if (jcr->db) {
142 memset(&cr, 0, sizeof(cr));
143 bstrncpy(cr.Name, jcr->client->hdr.name, sizeof(cr.Name));
144 cr.AutoPrune = jcr->client->AutoPrune;
145 cr.FileRetention = jcr->client->FileRetention;
146 cr.JobRetention = jcr->client->JobRetention;
147 bstrncpy(cr.Uname, fd->msg+strlen(OKjob)+1, sizeof(cr.Uname));
148 if (!db_update_client_record(jcr, jcr->db, &cr)) {
149 Jmsg(jcr, M_WARNING, 0, _("Error updating Client record. ERR=%s\n"),
150 db_strerror(jcr->db));
154 Jmsg(jcr, M_FATAL, 0, _("FD gave bad response to JobId command: %s\n"),
156 set_jcr_job_status(jcr, JS_ErrorTerminated);
163 * This subroutine edits the last job start time into a
164 * "since=date/time" buffer that is returned in the
165 * variable since. This is used for display purposes in
166 * the job report. The time in jcr->stime is later
167 * passed to tell the File daemon what to do.
169 void get_level_since_time(JCR *jcr, char *since, int since_len)
173 bool do_full = false;
174 bool do_diff = false;
176 utime_t last_full_time = 0;
177 utime_t last_diff_time;
180 /* If job cloned and a since time already given, use it */
181 if (jcr->cloned && jcr->stime && jcr->stime[0]) {
182 bstrncpy(since, _(", since="), since_len);
183 bstrncat(since, jcr->stime, since_len);
186 /* Make sure stime buffer is allocated */
188 jcr->stime = get_pool_memory(PM_MESSAGE);
192 * Lookup the last FULL backup job to get the time/date for a
193 * differential or incremental save.
195 switch (jcr->getJobLevel()) {
198 POOLMEM *stime = get_pool_memory(PM_MESSAGE);
199 /* Look up start time of last Full job */
200 now = (utime_t)time(NULL);
201 jcr->jr.JobId = 0; /* flag to return since time */
203 * This is probably redundant, but some of the code below
204 * uses jcr->stime, so don't remove unless you are sure.
206 if (!db_find_job_start_time(jcr, jcr->db, &jcr->jr, &jcr->stime)) {
209 have_full = db_find_last_job_start_time(jcr, jcr->db, &jcr->jr, &stime, L_FULL);
211 last_full_time = str_to_utime(stime);
213 do_full = true; /* No full, upgrade to one */
215 Dmsg4(50, "have_full=%d do_full=%d now=%lld full_time=%lld\n", have_full,
216 do_full, now, last_full_time);
217 /* Make sure the last diff is recent enough */
218 if (have_full && jcr->getJobLevel() == L_INCREMENTAL && jcr->job->MaxDiffInterval > 0) {
219 /* Lookup last diff job */
220 if (db_find_last_job_start_time(jcr, jcr->db, &jcr->jr, &stime, L_DIFFERENTIAL)) {
221 last_diff_time = str_to_utime(stime);
222 /* If no Diff since Full, use Full time */
223 if (last_diff_time < last_full_time) {
224 last_diff_time = last_full_time;
226 Dmsg2(50, "last_diff_time=%lld last_full_time=%lld\n", last_diff_time,
229 /* No last differential, so use last full time */
230 last_diff_time = last_full_time;
231 Dmsg1(50, "No last_diff_time setting to full_time=%lld\n", last_full_time);
233 do_diff = ((now - last_diff_time) >= jcr->job->MaxDiffInterval);
234 Dmsg2(50, "do_diff=%d diffInter=%lld\n", do_diff, jcr->job->MaxDiffInterval);
236 /* Note, do_full takes precedence over do_diff */
237 if (have_full && jcr->job->MaxFullInterval > 0) {
238 do_full = ((now - last_full_time) >= jcr->job->MaxFullInterval);
240 free_pool_memory(stime);
243 /* No recent Full job found, so upgrade this one to Full */
244 Jmsg(jcr, M_INFO, 0, "%s", db_strerror(jcr->db));
245 Jmsg(jcr, M_INFO, 0, _("No prior or suitable Full backup found in catalog. Doing FULL backup.\n"));
246 bsnprintf(since, since_len, _(" (upgraded from %s)"),
247 level_to_str(jcr->getJobLevel()));
248 jcr->set_JobLevel(jcr->jr.JobLevel = L_FULL);
249 } else if (do_diff) {
250 /* No recent diff job found, so upgrade this one to Diff */
251 Jmsg(jcr, M_INFO, 0, _("No prior or suitable Differential backup found in catalog. Doing Differential backup.\n"));
252 bsnprintf(since, since_len, _(" (upgraded from %s)"),
253 level_to_str(jcr->getJobLevel()));
254 jcr->set_JobLevel(jcr->jr.JobLevel = L_DIFFERENTIAL);
256 if (jcr->job->rerun_failed_levels) {
257 if (db_find_failed_job_since(jcr, jcr->db, &jcr->jr, jcr->stime, JobLevel)) {
258 Jmsg(jcr, M_INFO, 0, _("Prior failed job found in catalog. Upgrading to %s.\n"),
259 level_to_str(JobLevel));
260 bsnprintf(since, since_len, _(" (upgraded from %s)"),
261 level_to_str(jcr->getJobLevel()));
262 jcr->set_JobLevel(jcr->jr.JobLevel = JobLevel);
263 jcr->jr.JobId = jcr->JobId;
267 bstrncpy(since, _(", since="), since_len);
268 bstrncat(since, jcr->stime, since_len);
270 jcr->jr.JobId = jcr->JobId;
273 Dmsg2(100, "Level=%c last start time=%s\n", jcr->getJobLevel(), jcr->stime);
276 static void send_since_time(JCR *jcr)
278 BSOCK *fd = jcr->file_bsock;
282 stime = str_to_utime(jcr->stime);
283 fd->fsend(levelcmd, "", NT_("since_utime "), edit_uint64(stime, ed1), 0);
284 while (bget_dirmsg(fd) >= 0) { /* allow him to poll us to sync clocks */
285 Jmsg(jcr, M_INFO, 0, "%s\n", fd->msg);
290 * Send level command to FD.
291 * Used for backup jobs and estimate command.
293 bool send_level_command(JCR *jcr)
295 BSOCK *fd = jcr->file_bsock;
296 const char *accurate = jcr->accurate?"accurate_":"";
297 const char *not_accurate = "";
299 * Send Level command to File daemon
301 switch (jcr->getJobLevel()) {
303 fd->fsend(levelcmd, not_accurate, "base", " ", 0);
305 /* L_NONE is the console, sending something off to the FD */
308 fd->fsend(levelcmd, not_accurate, "full", " ", 0);
311 fd->fsend(levelcmd, accurate, "differential", " ", 0);
312 send_since_time(jcr);
315 fd->fsend(levelcmd, accurate, "incremental", " ", 0);
316 send_since_time(jcr);
320 Jmsg2(jcr, M_FATAL, 0, _("Unimplemented backup level %d %c\n"),
321 jcr->getJobLevel(), jcr->getJobLevel());
324 Dmsg1(120, ">filed: %s", fd->msg);
325 if (!response(jcr, fd, OKlevel, "Level", DISPLAY_ERROR)) {
332 * Send either an Included or an Excluded list to FD
334 static bool send_fileset(JCR *jcr)
336 FILESET *fileset = jcr->fileset;
337 BSOCK *fd = jcr->file_bsock;
338 STORE *store = jcr->wstore;
344 num = fileset->num_includes;
346 num = fileset->num_excludes;
348 for (int i=0; i<num; i++) {
354 ie = fileset->include_items[i];
357 ie = fileset->exclude_items[i];
361 bnet_fsend(fd, "Z %s\n", ie->ignoredir);
363 for (j=0; j<ie->num_opts; j++) {
364 FOPTS *fo = ie->opts_list[j];
366 bool enhanced_wild = false;
367 for (k=0; fo->opts[k]!='\0'; k++) {
368 if (fo->opts[k]=='W') {
369 enhanced_wild = true;
374 /* Strip out compression option Zn if disallowed for this Storage */
375 if (store && !store->AllowCompress) {
376 char newopts[MAX_FOPTS];
377 bool done=false; /* print warning only if compression enabled in FS */
379 for (k=0; fo->opts[k]!='\0'; k++) {
380 /* Z compress option is followed by the single-digit compress level */
381 if (fo->opts[k]=='Z') {
383 k++; /* skip option and level */
385 newopts[j] = fo->opts[k];
393 _("FD compression disabled for this Job because AllowCompress=No in Storage resource.\n") );
395 /* Send the new trimmed option set without overwriting fo->opts */
396 fd->fsend("O %s\n", newopts);
398 /* Send the original options */
399 fd->fsend("O %s\n", fo->opts);
402 for (k=0; k<fo->regex.size(); k++) {
403 fd->fsend("R %s\n", fo->regex.get(k));
405 for (k=0; k<fo->regexdir.size(); k++) {
406 fd->fsend("RD %s\n", fo->regexdir.get(k));
408 for (k=0; k<fo->regexfile.size(); k++) {
409 fd->fsend("RF %s\n", fo->regexfile.get(k));
411 for (k=0; k<fo->wild.size(); k++) {
412 fd->fsend("W %s\n", fo->wild.get(k));
414 for (k=0; k<fo->wilddir.size(); k++) {
415 fd->fsend("WD %s\n", fo->wilddir.get(k));
417 for (k=0; k<fo->wildfile.size(); k++) {
418 fd->fsend("WF %s\n", fo->wildfile.get(k));
420 for (k=0; k<fo->wildbase.size(); k++) {
421 fd->fsend("W%c %s\n", enhanced_wild ? 'B' : 'F', fo->wildbase.get(k));
423 for (k=0; k<fo->base.size(); k++) {
424 fd->fsend("B %s\n", fo->base.get(k));
426 for (k=0; k<fo->fstype.size(); k++) {
427 fd->fsend("X %s\n", fo->fstype.get(k));
429 for (k=0; k<fo->drivetype.size(); k++) {
430 fd->fsend("XD %s\n", fo->drivetype.get(k));
433 fd->fsend("G %s\n", fo->plugin);
436 fd->fsend("D %s\n", fo->reader);
439 fd->fsend("T %s\n", fo->writer);
444 for (j=0; j<ie->name_list.size(); j++) {
445 item = (char *)ie->name_list.get(j);
446 if (!send_list_item(jcr, "F ", item, fd)) {
451 for (j=0; j<ie->plugin_list.size(); j++) {
452 item = (char *)ie->plugin_list.get(j);
453 if (!send_list_item(jcr, "P ", item, fd)) {
459 if (!include) { /* If we just did excludes */
460 break; /* all done */
462 include = false; /* Now do excludes */
465 fd->signal(BNET_EOD); /* end of data */
466 if (!response(jcr, fd, OKinc, "Include", DISPLAY_ERROR)) {
472 set_jcr_job_status(jcr, JS_ErrorTerminated);
477 static bool send_list_item(JCR *jcr, const char *code, char *item, BSOCK *fd)
487 p++; /* skip over the | */
488 fd->msg = edit_job_codes(jcr, fd->msg, p, "");
489 bpipe = open_bpipe(fd->msg, 0, "r");
492 Jmsg(jcr, M_FATAL, 0, _("Cannot run program: %s. ERR=%s\n"),
496 bstrncpy(buf, code, sizeof(buf));
497 Dmsg1(500, "code=%s\n", buf);
498 optlen = strlen(buf);
499 while (fgets(buf+optlen, sizeof(buf)-optlen, bpipe->rfd)) {
500 fd->msglen = Mmsg(fd->msg, "%s", buf);
501 Dmsg2(500, "Inc/exc len=%d: %s", fd->msglen, fd->msg);
502 if (!bnet_send(fd)) {
503 Jmsg(jcr, M_FATAL, 0, _(">filed: write error on socket\n"));
507 if ((stat=close_bpipe(bpipe)) != 0) {
509 Jmsg(jcr, M_FATAL, 0, _("Error running program: %s. ERR=%s\n"),
510 p, be.bstrerror(stat));
515 p++; /* skip over < */
516 if ((ffd = fopen(p, "rb")) == NULL) {
518 Jmsg(jcr, M_FATAL, 0, _("Cannot open included file: %s. ERR=%s\n"),
522 bstrncpy(buf, code, sizeof(buf));
523 Dmsg1(500, "code=%s\n", buf);
524 optlen = strlen(buf);
525 while (fgets(buf+optlen, sizeof(buf)-optlen, ffd)) {
526 fd->msglen = Mmsg(fd->msg, "%s", buf);
527 if (!bnet_send(fd)) {
528 Jmsg(jcr, M_FATAL, 0, _(">filed: write error on socket\n"));
535 p++; /* skip over \ */
536 /* Note, fall through wanted */
538 pm_strcpy(fd->msg, code);
539 fd->msglen = pm_strcat(fd->msg, p);
540 Dmsg1(500, "Inc/Exc name=%s\n", fd->msg);
542 Jmsg(jcr, M_FATAL, 0, _(">filed: write error on socket\n"));
552 * Send include list to File daemon
554 bool send_include_list(JCR *jcr)
556 BSOCK *fd = jcr->file_bsock;
557 if (jcr->fileset->new_include) {
558 fd->fsend(filesetcmd, jcr->fileset->enable_vss ? " vss=1" : "");
559 return send_fileset(jcr);
566 * Send exclude list to File daemon
567 * Under the new scheme, the Exclude list
568 * is part of the FileSet sent with the
569 * "include_list" above.
571 bool send_exclude_list(JCR *jcr)
576 /* TODO: drop this with runscript.old_proto in bacula 1.42 */
577 static char runbefore[] = "RunBeforeJob %s\n";
578 static char runafter[] = "RunAfterJob %s\n";
579 static char OKRunBefore[] = "2000 OK RunBefore\n";
580 static char OKRunAfter[] = "2000 OK RunAfter\n";
582 int send_runscript_with_old_proto(JCR *jcr, int when, POOLMEM *msg)
585 Dmsg1(120, "bdird: sending old runcommand to fd '%s'\n",msg);
586 if (when & SCRIPT_Before) {
587 bnet_fsend(jcr->file_bsock, runbefore, msg);
588 ret = response(jcr, jcr->file_bsock, OKRunBefore, "ClientRunBeforeJob", DISPLAY_ERROR);
590 bnet_fsend(jcr->file_bsock, runafter, msg);
591 ret = response(jcr, jcr->file_bsock, OKRunAfter, "ClientRunAfterJob", DISPLAY_ERROR);
597 * Send RunScripts to File daemon
598 * 1) We send all runscript to FD, they can be executed Before, After, or twice
599 * 2) Then, we send a "RunBeforeNow" command to the FD to tell him to do the
600 * first run_script() call. (ie ClientRunBeforeJob)
602 int send_runscripts_commands(JCR *jcr)
604 POOLMEM *msg = get_pool_memory(PM_FNAME);
605 BSOCK *fd = jcr->file_bsock;
607 bool launch_before_cmd = false;
608 POOLMEM *ehost = get_pool_memory(PM_FNAME);
611 Dmsg0(120, "bdird: sending runscripts to fd\n");
613 foreach_alist(cmd, jcr->job->RunScripts) {
614 if (cmd->can_run_at_level(jcr->getJobLevel()) && cmd->target) {
615 ehost = edit_job_codes(jcr, ehost, cmd->target, "");
616 Dmsg2(200, "bdird: runscript %s -> %s\n", cmd->target, ehost);
618 if (strcmp(ehost, jcr->client->name()) == 0) {
619 pm_strcpy(msg, cmd->command);
622 Dmsg1(120, "bdird: sending runscripts to fd '%s'\n", cmd->command);
624 /* TODO: remove this with bacula 1.42 */
625 if (cmd->old_proto) {
626 result = send_runscript_with_old_proto(jcr, cmd->when, msg);
629 fd->fsend(runscript, cmd->on_success,
635 result = response(jcr, fd, OKRunScript, "RunScript", DISPLAY_ERROR);
636 launch_before_cmd = true;
643 /* TODO : we have to play with other client */
646 send command to an other client
652 /* Tell the FD to execute the ClientRunBeforeJob */
653 if (launch_before_cmd) {
654 fd->fsend(runbeforenow);
655 if (!response(jcr, fd, OKRunBeforeNow, "RunBeforeNow", DISPLAY_ERROR)) {
659 free_pool_memory(msg);
660 free_pool_memory(ehost);
664 Jmsg(jcr, M_FATAL, 0, _("Client \"%s\" RunScript failed.\n"), ehost);
665 free_pool_memory(msg);
666 free_pool_memory(ehost);
673 * Read the attributes from the File daemon for
674 * a Verify job and store them in the catalog.
676 int get_attributes_and_put_in_catalog(JCR *jcr)
681 char digest[MAXSTRING];
683 fd = jcr->file_bsock;
684 jcr->jr.FirstIndex = 1;
686 /* Start transaction allocates jcr->attr and jcr->ar if needed */
687 db_start_transaction(jcr, jcr->db); /* start transaction if not already open */
690 Dmsg0(120, "bdird: waiting to receive file attributes\n");
691 /* Pickup file attributes and digest */
692 while (!fd->errors && (n = bget_dirmsg(fd)) > 0) {
696 char Digest[MAXSTRING]; /* either Verify opts or MD5/SHA1 digest */
698 if ((len = sscanf(fd->msg, "%ld %d %s", &file_index, &stream, Digest)) != 3) {
699 Jmsg(jcr, M_FATAL, 0, _("<filed: bad attributes, expected 3 fields got %d\n"
700 "msglen=%d msg=%s\n"), len, fd->msglen, fd->msg);
701 set_jcr_job_status(jcr, JS_ErrorTerminated);
705 /* The following three fields were sscanf'ed above so skip them */
706 skip_nonspaces(&p); /* skip FileIndex */
708 skip_nonspaces(&p); /* skip Stream */
710 skip_nonspaces(&p); /* skip Opts_Digest */
711 p++; /* skip space */
712 Dmsg1(dbglvl, "Stream=%d\n", stream);
713 if (stream == STREAM_UNIX_ATTRIBUTES || stream == STREAM_UNIX_ATTRIBUTES_EX) {
714 if (jcr->cached_attribute) {
715 Dmsg3(dbglvl, "Cached attr. Stream=%d fname=%s\n", ar->Stream, ar->fname,
717 if (!db_create_file_attributes_record(jcr, jcr->db, ar)) {
718 Jmsg1(jcr, M_FATAL, 0, _("Attribute create error. %s"), db_strerror(jcr->db));
721 /* Any cached attr is flushed so we can reuse jcr->attr and jcr->ar */
722 fn = jcr->fname = check_pool_memory_size(jcr->fname, fd->msglen);
724 *fn++ = *p++; /* copy filename */
726 *fn = *p++; /* term filename and point p to attribs */
727 pm_strcpy(jcr->attr, p); /* save attributes */
729 jcr->FileIndex = file_index;
730 ar->attr = jcr->attr;
731 ar->fname = jcr->fname;
732 ar->FileIndex = file_index;
735 ar->JobId = jcr->JobId;
736 ar->ClientId = jcr->ClientId;
740 ar->DigestType = CRYPTO_DIGEST_NONE;
741 jcr->cached_attribute = true;
743 Dmsg2(dbglvl, "dird<filed: stream=%d %s\n", stream, jcr->fname);
744 Dmsg1(dbglvl, "dird<filed: attr=%s\n", ar->attr);
745 jcr->FileId = ar->FileId;
747 * First, get STREAM_UNIX_ATTRIBUTES and fill ATTR_DBR structure
748 * Next, we CAN have a CRYPTO_DIGEST, so we fill ATTR_DBR with it (or not)
749 * When we get a new STREAM_UNIX_ATTRIBUTES, we known that we can add file to the catalog
750 * At the end, we have to add the last file
752 } else if (crypto_digest_stream_type(stream) != CRYPTO_DIGEST_NONE) {
753 if (jcr->FileIndex != (uint32_t)file_index) {
754 Jmsg3(jcr, M_ERROR, 0, _("%s index %d not same as attributes %d\n"),
755 stream_to_ascii(stream), file_index, jcr->FileIndex);
759 ar->DigestType = crypto_digest_stream_type(stream);
760 db_escape_string(jcr, jcr->db, digest, Digest, strlen(Digest));
761 Dmsg4(dbglvl, "stream=%d DigestLen=%d Digest=%s type=%d\n", stream,
762 strlen(digest), digest, ar->DigestType);
764 jcr->jr.JobFiles = jcr->JobFiles = file_index;
765 jcr->jr.LastIndex = file_index;
767 if (is_bnet_error(fd)) {
768 Jmsg1(jcr, M_FATAL, 0, _("<filed: Network error getting attributes. ERR=%s\n"),
772 if (jcr->cached_attribute) {
773 Dmsg3(dbglvl, "Cached attr with digest. Stream=%d fname=%s attr=%s\n", ar->Stream,
774 ar->fname, ar->attr);
775 if (!db_create_file_attributes_record(jcr, jcr->db, ar)) {
776 Jmsg1(jcr, M_FATAL, 0, _("Attribute create error. %s"), db_strerror(jcr->db));
778 jcr->cached_attribute = false;
780 set_jcr_job_status(jcr, JS_Terminated);