2 Bacula® - The Network Backup Solution
4 Copyright (C) 2004-2007 Free Software Foundation Europe e.V.
6 The main author of Bacula is Kern Sibbald, with contributions from
7 many others, a complete list can be found in the file AUTHORS.
8 This program is Free Software; you can redistribute it and/or
9 modify it under the terms of version two of the GNU General Public
10 License as published by the Free Software Foundation plus additions
11 that are listed in the file LICENSE.
13 This program is distributed in the hope that it will be useful, but
14 WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 Bacula® is a registered trademark of John Walker.
24 The licensor of Bacula is the Free Software Foundation Europe
25 (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
26 Switzerland, email:ftf@fsfeurope.org.
30 * Bacula Director -- migrate.c -- responsible for doing
33 * Kern Sibbald, September MMIV
35 * Basic tasks done here:
36 * Open DB and create records for this job.
37 * Open Message Channel with Storage daemon to tell him a job will be starting.
38 * Open connection with Storage daemon and pass him commands
40 * When the Storage daemon finishes the job, update the DB.
49 #include "lib/bregex.h"
54 static const int dbglevel = 10;
56 static char OKbootstrap[] = "3000 OK bootstrap\n";
57 static int get_job_to_migrate(JCR *jcr);
59 static bool regex_find_jobids(JCR *jcr, idpkt *ids, const char *query1,
60 const char *query2, const char *type);
61 static bool find_mediaid_then_jobids(JCR *jcr, idpkt *ids, const char *query1,
63 static bool find_jobids_from_mediaid_list(JCR *jcr, idpkt *ids, const char *type);
64 static void start_migration_job(JCR *jcr);
65 static int get_next_dbid_from_list(char **p, DBId_t *DBId);
68 * Called here before the job is run to do the job
69 * specific setup. Note, one of the important things to
70 * complete in this init code is to make the definitive
71 * choice of input and output storage devices. This is
72 * because immediately after the init, the job is queued
73 * in the jobq.c code, and it checks that all the resources
74 * (storage resources in particular) are available, so these
75 * must all be properly defined.
77 * previous_jr refers to the job DB record of the Job that is
78 * going to be migrated.
79 * prev_job refers to the job resource of the Job that is
80 * going to be migrated.
81 * jcr is the jcr for the current "migration" job. It is a
82 * control job that is put in the DB as a migration job, which
83 * means that this job migrated a previous job to a new job.
84 * No Volume or File data is associated with this control
86 * mig_jcr refers to the newly migrated job that is run by
87 * the current jcr. It is a backup job that moves (migrates) the
88 * data written for the previous_jr into the new pool. This
89 * job (mig_jcr) becomes the new backup job that replaces
90 * the original backup job. Note, this jcr is not really run. It
91 * is simply attached to the current jcr. It will show up in
92 * the Director's status output, but not in the SD or FD, both of
93 * which deal only with the current migration job (i.e. jcr).
95 bool do_migration_init(JCR *jcr)
101 JCR *mig_jcr; /* newly migrated job */
105 apply_pool_overrides(jcr);
107 jcr->jr.PoolId = get_or_create_pool_record(jcr, jcr->pool->name());
108 if (jcr->jr.PoolId == 0) {
109 Dmsg1(dbglevel, "JobId=%d no PoolId\n", (int)jcr->JobId);
110 Jmsg(jcr, M_FATAL, 0, _("Could not get or create a Pool record.\n"));
114 * Note, at this point, pool is the pool for this job. We
115 * transfer it to rpool (read pool), and a bit later,
116 * pool will be changed to point to the write pool,
117 * which comes from pool->NextPool.
119 jcr->rpool = jcr->pool; /* save read pool */
120 pm_strcpy(jcr->rpool_source, jcr->pool_source);
123 Dmsg2(dbglevel, "Read pool=%s (From %s)\n", jcr->rpool->name(), jcr->rpool_source);
125 /* If we find a job or jobs to migrate it is previous_jr.JobId */
126 count = get_job_to_migrate(jcr);
134 Dmsg1(dbglevel, "Back from get_job_to_migrate JobId=%d\n", (int)jcr->JobId);
136 if (jcr->previous_jr.JobId == 0) {
137 Dmsg1(dbglevel, "JobId=%d no previous JobId\n", (int)jcr->JobId);
138 Jmsg(jcr, M_INFO, 0, _("No previous Job found to migrate.\n"));
139 return true; /* no work */
142 if (!get_or_create_fileset_record(jcr)) {
143 Dmsg1(dbglevel, "JobId=%d no FileSet\n", (int)jcr->JobId);
144 Jmsg(jcr, M_FATAL, 0, _("Could not get or create the FileSet record.\n"));
148 create_restore_bootstrap_file(jcr);
150 if (jcr->previous_jr.JobId == 0 || jcr->ExpectedFiles == 0) {
151 set_jcr_job_status(jcr, JS_Terminated);
152 Dmsg1(dbglevel, "JobId=%d expected files == 0\n", (int)jcr->JobId);
153 if (jcr->previous_jr.JobId == 0) {
154 Jmsg(jcr, M_INFO, 0, _("No previous Job found to migrate.\n"));
156 Jmsg(jcr, M_INFO, 0, _("Previous Job has no data to migrate.\n"));
158 return true; /* no work */
161 Dmsg5(dbglevel, "JobId=%d: Previous: Name=%s JobId=%d Type=%c Level=%c\n",
163 jcr->previous_jr.Name, (int)jcr->previous_jr.JobId,
164 jcr->previous_jr.JobType, jcr->previous_jr.JobLevel);
166 Dmsg5(dbglevel, "JobId=%d: Current: Name=%s JobId=%d Type=%c Level=%c\n",
168 jcr->jr.Name, (int)jcr->jr.JobId,
169 jcr->jr.JobType, jcr->jr.JobLevel);
172 job = (JOB *)GetResWithName(R_JOB, jcr->jr.Name);
173 prev_job = (JOB *)GetResWithName(R_JOB, jcr->previous_jr.Name);
176 Jmsg(jcr, M_FATAL, 0, _("Job resource not found for \"%s\".\n"), jcr->jr.Name);
180 Jmsg(jcr, M_FATAL, 0, _("Previous Job resource not found for \"%s\".\n"),
181 jcr->previous_jr.Name);
185 jcr->spool_data = job->spool_data; /* turn on spooling if requested in job */
187 /* Create a migation jcr */
188 mig_jcr = jcr->mig_jcr = new_jcr(sizeof(JCR), dird_free_jcr);
189 memcpy(&mig_jcr->previous_jr, &jcr->previous_jr, sizeof(mig_jcr->previous_jr));
192 * Turn the mig_jcr into a "real" job that takes on the aspects of
193 * the previous backup job "prev_job".
195 set_jcr_defaults(mig_jcr, prev_job);
196 if (!setup_job(mig_jcr)) {
197 Jmsg(jcr, M_FATAL, 0, _("setup job failed.\n"));
201 /* Now reset the job record from the previous job */
202 memcpy(&mig_jcr->jr, &jcr->previous_jr, sizeof(mig_jcr->jr));
203 /* Update the jr to reflect the new values of PoolId and JobId. */
204 mig_jcr->jr.PoolId = jcr->jr.PoolId;
205 mig_jcr->jr.JobId = mig_jcr->JobId;
207 Dmsg4(dbglevel, "mig_jcr: Name=%s JobId=%d Type=%c Level=%c\n",
208 mig_jcr->jr.Name, (int)mig_jcr->jr.JobId,
209 mig_jcr->jr.JobType, mig_jcr->jr.JobLevel);
212 * Get the PoolId used with the original job. Then
213 * find the pool name from the database record.
215 memset(&pr, 0, sizeof(pr));
216 pr.PoolId = mig_jcr->previous_jr.PoolId;
217 if (!db_get_pool_record(jcr, jcr->db, &pr)) {
218 Jmsg(jcr, M_FATAL, 0, _("Pool for JobId %s not in database. ERR=%s\n"),
219 edit_int64(pr.PoolId, ed1), db_strerror(jcr->db));
222 /* Get the pool resource corresponding to the original job */
223 pool = (POOL *)GetResWithName(R_POOL, pr.Name);
225 Jmsg(jcr, M_FATAL, 0, _("Pool resource \"%s\" not found.\n"), pr.Name);
229 /* If pool storage specified, use it for restore */
230 copy_rstorage(mig_jcr, pool->storage, _("Pool resource"));
231 copy_rstorage(jcr, pool->storage, _("Pool resource"));
234 * If the original backup pool has a NextPool, make sure a
235 * record exists in the database. Note, in this case, we
236 * will be migrating from pool to pool->NextPool.
238 if (pool->NextPool) {
239 jcr->jr.PoolId = get_or_create_pool_record(jcr, pool->NextPool->name());
240 if (jcr->jr.PoolId == 0) {
244 if (!set_migration_wstorage(jcr, pool)) {
247 mig_jcr->pool = jcr->pool = pool->NextPool;
248 pm_strcpy(jcr->pool_source, _("Job Pool's NextPool resource"));
249 mig_jcr->jr.PoolId = jcr->jr.PoolId;
251 Dmsg2(dbglevel, "Write pool=%s read rpool=%s\n", jcr->pool->name(), jcr->rpool->name());
256 * Do a Migration of a previous job
258 * Returns: false on failure
261 bool do_migration(JCR *jcr)
265 JCR *mig_jcr = jcr->mig_jcr; /* newly migrated job */
268 * If mig_jcr is NULL, there is nothing to do for this job,
269 * so set a normal status, cleanup and return OK.
272 set_jcr_job_status(jcr, JS_Terminated);
273 migration_cleanup(jcr, jcr->JobStatus);
277 /* Print Job Start message */
278 Jmsg(jcr, M_INFO, 0, _("Start Migration JobId %s, Job=%s\n"),
279 edit_uint64(jcr->JobId, ed1), jcr->Job);
284 * Open a message channel connection with the Storage
285 * daemon. This is to let him know that our client
286 * will be contacting him for a backup session.
289 Dmsg0(110, "Open connection with storage daemon\n");
290 set_jcr_job_status(jcr, JS_WaitSD);
291 set_jcr_job_status(mig_jcr, JS_WaitSD);
293 * Start conversation with Storage daemon
295 if (!connect_to_storage_daemon(jcr, 10, SDConnectTimeout, 1)) {
298 sd = jcr->store_bsock;
300 * Now start a job with the Storage daemon
302 Dmsg2(dbglevel, "Read store=%s, write store=%s\n",
303 ((STORE *)jcr->rstorage->first())->name(),
304 ((STORE *)jcr->wstorage->first())->name());
305 if (((STORE *)jcr->rstorage->first())->name() == ((STORE *)jcr->wstorage->first())->name()) {
306 Jmsg(jcr, M_FATAL, 0, _("Read storage \"%s\" same as write storage.\n"),
307 ((STORE *)jcr->rstorage->first())->name());
310 if (!start_storage_daemon_job(jcr, jcr->rstorage, jcr->wstorage)) {
313 Dmsg0(150, "Storage daemon connection OK\n");
315 if (!send_bootstrap_file(jcr, sd) ||
316 !response(jcr, sd, OKbootstrap, "Bootstrap", DISPLAY_ERROR)) {
321 * We re-update the job start record so that the start
322 * time is set after the run before job. This avoids
323 * that any files created by the run before job will
324 * be saved twice. They will be backed up in the current
325 * job, but not in the next one unless they are changed.
326 * Without this, they will be backed up in this job and
327 * in the next job run because in that case, their date
328 * is after the start of this run.
330 jcr->start_time = time(NULL);
331 jcr->jr.StartTime = jcr->start_time;
332 jcr->jr.JobTDate = jcr->start_time;
333 set_jcr_job_status(jcr, JS_Running);
335 /* Update job start record for this migration control job */
336 if (!db_update_job_start_record(jcr, jcr->db, &jcr->jr)) {
337 Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(jcr->db));
342 mig_jcr->start_time = time(NULL);
343 mig_jcr->jr.StartTime = mig_jcr->start_time;
344 mig_jcr->jr.JobTDate = mig_jcr->start_time;
345 set_jcr_job_status(mig_jcr, JS_Running);
347 /* Update job start record for the real migration backup job */
348 if (!db_update_job_start_record(mig_jcr, mig_jcr->db, &mig_jcr->jr)) {
349 Jmsg(jcr, M_FATAL, 0, "%s", db_strerror(mig_jcr->db));
353 Dmsg4(dbglevel, "mig_jcr: Name=%s JobId=%d Type=%c Level=%c\n",
354 mig_jcr->jr.Name, (int)mig_jcr->jr.JobId,
355 mig_jcr->jr.JobType, mig_jcr->jr.JobLevel);
359 * Start the job prior to starting the message thread below
360 * to avoid two threads from using the BSOCK structure at
363 if (!bnet_fsend(sd, "run")) {
368 * Now start a Storage daemon message thread
370 if (!start_storage_daemon_message_thread(jcr)) {
375 set_jcr_job_status(jcr, JS_Running);
376 set_jcr_job_status(mig_jcr, JS_Running);
378 /* Pickup Job termination data */
379 /* Note, the SD stores in jcr->JobFiles/ReadBytes/JobBytes/Errors */
380 wait_for_storage_daemon_termination(jcr);
381 set_jcr_job_status(jcr, jcr->SDJobStatus);
382 db_write_batch_file_records(jcr); /* used by bulk batch file insert */
383 if (jcr->JobStatus != JS_Terminated) {
387 migration_cleanup(jcr, jcr->JobStatus);
390 UAContext *ua = new_ua_context(jcr);
391 edit_uint64(jcr->previous_jr.JobId, jobid);
392 /* Purge all old file records, but leave Job record */
393 purge_files_from_jobs(ua, jobid);
404 /* Add an item to the list if it is unique */
405 static void add_unique_id(idpkt *ids, char *item)
410 /* Walk through current list to see if each item is the same as item */
413 for (int i=0; i<(int)sizeof(id); i++) {
416 } else if (*q == ',') {
423 if (strcmp(item, id) == 0) {
427 /* Did not find item, so add it to list */
428 if (ids->count == 0) {
431 pm_strcat(ids->list, ",");
433 pm_strcat(ids->list, item);
435 // Dmsg3(0, "add_uniq count=%d Ids=%p %s\n", ids->count, ids->list, ids->list);
440 * Callback handler make list of DB Ids
442 static int unique_dbid_handler(void *ctx, int num_fields, char **row)
444 idpkt *ids = (idpkt *)ctx;
446 add_unique_id(ids, row[0]);
447 Dmsg3(dbglevel, "dbid_hdlr count=%d Ids=%p %s\n", ids->count, ids->list, ids->list);
457 static int item_compare(void *item1, void *item2)
459 uitem *i1 = (uitem *)item1;
460 uitem *i2 = (uitem *)item2;
461 return strcmp(i1->item, i2->item);
464 static int unique_name_handler(void *ctx, int num_fields, char **row)
466 dlist *list = (dlist *)ctx;
468 uitem *new_item = (uitem *)malloc(sizeof(uitem));
471 memset(new_item, 0, sizeof(uitem));
472 new_item->item = bstrdup(row[0]);
473 Dmsg1(dbglevel, "Unique_name_hdlr Item=%s\n", row[0]);
474 item = (uitem *)list->binary_insert((void *)new_item, item_compare);
475 if (item != new_item) { /* already in list */
476 free(new_item->item);
477 free((char *)new_item);
483 /* Get Job names in Pool */
484 const char *sql_job =
485 "SELECT DISTINCT Job.Name from Job,Pool"
486 " WHERE Pool.Name='%s' AND Job.PoolId=Pool.PoolId";
488 /* Get JobIds from regex'ed Job names */
489 const char *sql_jobids_from_job =
490 "SELECT DISTINCT Job.JobId,Job.StartTime FROM Job,Pool"
491 " WHERE Job.Name='%s' AND Pool.Name='%s' AND Job.PoolId=Pool.PoolId"
492 " ORDER by Job.StartTime";
494 /* Get Client names in Pool */
495 const char *sql_client =
496 "SELECT DISTINCT Client.Name from Client,Pool,Job"
497 " WHERE Pool.Name='%s' AND Job.ClientId=Client.ClientId AND"
498 " Job.PoolId=Pool.PoolId";
500 /* Get JobIds from regex'ed Client names */
501 const char *sql_jobids_from_client =
502 "SELECT DISTINCT Job.JobId,Job.StartTime FROM Job,Pool,Client"
503 " WHERE Client.Name='%s' AND Pool.Name='%s' AND Job.PoolId=Pool.PoolId"
504 " AND Job.ClientId=Client.ClientId AND Job.Type='B'"
505 " ORDER by Job.StartTime";
507 /* Get Volume names in Pool */
508 const char *sql_vol =
509 "SELECT DISTINCT VolumeName FROM Media,Pool WHERE"
510 " VolStatus in ('Full','Used','Error') AND Media.Enabled=1 AND"
511 " Media.PoolId=Pool.PoolId AND Pool.Name='%s'";
513 /* Get JobIds from regex'ed Volume names */
514 const char *sql_jobids_from_vol =
515 "SELECT DISTINCT Job.JobId,Job.StartTime FROM Media,JobMedia,Job"
516 " WHERE Media.VolumeName='%s' AND Media.MediaId=JobMedia.MediaId"
517 " AND JobMedia.JobId=Job.JobId AND Job.Type='B'"
518 " ORDER by Job.StartTime";
521 const char *sql_smallest_vol =
522 "SELECT MediaId FROM Media,Pool WHERE"
523 " VolStatus in ('Full','Used','Error') AND Media.Enabled=1 AND"
524 " Media.PoolId=Pool.PoolId AND Pool.Name='%s'"
525 " ORDER BY VolBytes ASC LIMIT 1";
527 const char *sql_oldest_vol =
528 "SELECT MediaId FROM Media,Pool WHERE"
529 " VolStatus in ('Full','Used','Error') AND Media.Enabled=1 AND"
530 " Media.PoolId=Pool.PoolId AND Pool.Name='%s'"
531 " ORDER BY LastWritten ASC LIMIT 1";
533 /* Get JobIds when we have selected MediaId */
534 const char *sql_jobids_from_mediaid =
535 "SELECT DISTINCT Job.JobId,Job.StartTime FROM JobMedia,Job"
536 " WHERE JobMedia.JobId=Job.JobId AND JobMedia.MediaId=%s"
538 " ORDER by Job.StartTime";
540 /* Get tne number of bytes in the pool */
541 const char *sql_pool_bytes =
542 "SELECT SUM(VolBytes) FROM Media,Pool WHERE"
543 " VolStatus in ('Full','Used','Error','Append') AND Media.Enabled=1 AND"
544 " Media.PoolId=Pool.PoolId AND Pool.Name='%s'";
546 /* Get tne number of bytes in the Jobs */
547 const char *sql_job_bytes =
548 "SELECT SUM(JobBytes) FROM Job WHERE JobId IN (%s)";
551 /* Get Media Ids in Pool */
552 const char *sql_mediaids =
553 "SELECT MediaId FROM Media,Pool WHERE"
554 " VolStatus in ('Full','Used','Error') AND Media.Enabled=1 AND"
555 " Media.PoolId=Pool.PoolId AND Pool.Name='%s' ORDER BY LastWritten ASC";
557 /* Get JobIds in Pool longer than specified time */
558 const char *sql_pool_time =
559 "SELECT DISTINCT Job.JobId from Pool,Job,Media,JobMedia WHERE"
560 " Pool.Name='%s' AND Media.PoolId=Pool.PoolId AND"
561 " VolStatus in ('Full','Used','Error') AND Media.Enabled=1 AND"
563 " JobMedia.JobId=Job.JobId AND Job.PoolId=Media.PoolId"
564 " AND Job.RealEndTime<='%s'";
567 * const char *sql_ujobid =
568 * "SELECT DISTINCT Job.Job from Client,Pool,Media,Job,JobMedia "
569 * " WHERE Media.PoolId=Pool.PoolId AND Pool.Name='%s' AND"
570 * " JobMedia.JobId=Job.JobId AND Job.PoolId=Media.PoolId";
577 * This is the central piece of code that finds a job or jobs
578 * actually JobIds to migrate. It first looks to see if one
579 * has been "manually" specified in jcr->MigrateJobId, and if
580 * so, it returns that JobId to be run. Otherwise, it
581 * examines the Selection Type to see what kind of migration
582 * we are doing (Volume, Job, Client, ...) and applies any
583 * Selection Pattern if appropriate to obtain a list of JobIds.
584 * Finally, it will loop over all the JobIds found, except the last
585 * one starting a new job with MigrationJobId set to that JobId, and
586 * finally, it returns the last JobId to the caller.
588 * Returns: -1 on error
589 * 0 if no jobs to migrate
590 * 1 if OK and jcr->previous_jr filled in
592 static int get_job_to_migrate(JCR *jcr)
594 char ed1[30], ed2[30];
595 POOL_MEM query(PM_MESSAGE);
600 idpkt ids, mid, jids;
605 char dt[MAX_TIME_LENGTH];
608 ids.list = get_pool_memory(PM_MESSAGE);
611 mid.list = get_pool_memory(PM_MESSAGE);
614 jids.list = get_pool_memory(PM_MESSAGE);
620 * If MigrateJobId is set, then we migrate only that Job,
621 * otherwise, we go through the full selection of jobs to
624 if (jcr->MigrateJobId != 0) {
625 Dmsg1(dbglevel, "At Job start previous jobid=%u\n", jcr->MigrateJobId);
626 edit_uint64(jcr->MigrateJobId, ids.list);
629 switch (jcr->job->selection_type) {
631 if (!regex_find_jobids(jcr, &ids, sql_job, sql_jobids_from_job, "Job")) {
636 if (!regex_find_jobids(jcr, &ids, sql_client, sql_jobids_from_client, "Client")) {
641 if (!regex_find_jobids(jcr, &ids, sql_vol, sql_jobids_from_vol, "Volume")) {
646 if (!jcr->job->selection_pattern) {
647 Jmsg(jcr, M_FATAL, 0, _("No Migration SQL selection pattern specified.\n"));
650 Dmsg1(dbglevel, "SQL=%s\n", jcr->job->selection_pattern);
651 if (!db_sql_query(jcr->db, jcr->job->selection_pattern,
652 unique_dbid_handler, (void *)&ids)) {
653 Jmsg(jcr, M_FATAL, 0,
654 _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
658 case MT_SMALLEST_VOL:
659 if (!find_mediaid_then_jobids(jcr, &ids, sql_smallest_vol, "Smallest Volume")) {
664 if (!find_mediaid_then_jobids(jcr, &ids, sql_oldest_vol, "Oldest Volume")) {
669 case MT_POOL_OCCUPANCY:
671 /* Find count of bytes in pool */
672 Mmsg(query, sql_pool_bytes, jcr->rpool->name());
673 if (!db_sql_query(jcr->db, query.c_str(), db_int64_handler, (void *)&ctx)) {
674 Jmsg(jcr, M_FATAL, 0, _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
677 if (ctx.count == 0) {
678 Jmsg(jcr, M_INFO, 0, _("No Volumes found to migrate.\n"));
681 pool_bytes = ctx.value;
682 Dmsg2(dbglevel, "highbytes=%d pool=%d\n", (int)jcr->rpool->MigrationHighBytes,
684 if (pool_bytes < (int64_t)jcr->rpool->MigrationHighBytes) {
685 Jmsg(jcr, M_INFO, 0, _("No Volumes found to migrate.\n"));
688 Dmsg0(dbglevel, "We should do Occupation migration.\n");
691 /* Find a list of MediaIds that could be migrated */
692 Mmsg(query, sql_mediaids, jcr->rpool->name());
693 Dmsg1(dbglevel, "query=%s\n", query.c_str());
694 if (!db_sql_query(jcr->db, query.c_str(), unique_dbid_handler, (void *)&ids)) {
695 Jmsg(jcr, M_FATAL, 0, _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
698 if (ids.count == 0) {
699 Jmsg(jcr, M_INFO, 0, _("No Volumes found to migrate.\n"));
702 Dmsg2(dbglevel, "Pool Occupancy ids=%d MediaIds=%s\n", ids.count, ids.list);
705 * Now loop over MediaIds getting more JobIds to migrate until
706 * we reduce the pool occupancy below the low water mark.
709 for (int i=0; i < (int)ids.count; i++) {
710 stat = get_next_dbid_from_list(&p, &MediaId);
711 Dmsg2(dbglevel, "get_next_dbid stat=%d MediaId=%u\n", stat, MediaId);
713 Jmsg(jcr, M_FATAL, 0, _("Invalid MediaId found.\n"));
715 } else if (stat == 0) {
719 Mmsg(mid.list, "%s", edit_int64(MediaId, ed1));
720 if (!find_jobids_from_mediaid_list(jcr, &mid, "Volumes")) {
724 pm_strcat(jids.list, ",");
726 pm_strcat(jids.list, mid.list);
727 jids.count += mid.count;
729 /* Now get the count of bytes added */
731 /* Find count of bytes from Jobs */
732 Mmsg(query, sql_job_bytes, mid.list);
733 Dmsg1(dbglevel, "Jobbytes query: %s\n", query.c_str());
734 if (!db_sql_query(jcr->db, query.c_str(), db_int64_handler, (void *)&ctx)) {
735 Jmsg(jcr, M_FATAL, 0, _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
738 pool_bytes -= ctx.value;
739 Dmsg1(dbglevel, "Total migrate Job bytes=%s\n", edit_int64(ctx.value, ed1));
740 Dmsg2(dbglevel, "lowbytes=%s poolafter=%s\n",
741 edit_int64(jcr->rpool->MigrationLowBytes, ed1),
742 edit_int64(pool_bytes, ed2));
743 if (pool_bytes <= (int64_t)jcr->rpool->MigrationLowBytes) {
744 Dmsg0(dbglevel, "We should be done.\n");
749 /* Transfer jids to ids, where the jobs list is expected */
750 ids.count = jids.count;
751 pm_strcpy(ids.list, jids.list);
752 Dmsg2(dbglevel, "Pool Occupancy ids=%d JobIds=%s\n", ids.count, ids.list);
756 ttime = time(NULL) - (time_t)jcr->rpool->MigrationTime;
757 (void)localtime_r(&ttime, &tm);
758 strftime(dt, sizeof(dt), "%Y-%m-%d %H:%M:%S", &tm);
761 Mmsg(query, sql_pool_time, jcr->rpool->name(), dt);
762 Dmsg1(dbglevel, "query=%s\n", query.c_str());
763 if (!db_sql_query(jcr->db, query.c_str(), unique_dbid_handler, (void *)&ids)) {
764 Jmsg(jcr, M_FATAL, 0, _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
767 if (ids.count == 0) {
768 Jmsg(jcr, M_INFO, 0, _("No Volumes found to migrate.\n"));
771 Dmsg2(dbglevel, "PoolTime ids=%d JobIds=%s\n", ids.count, ids.list);
775 Jmsg(jcr, M_FATAL, 0, _("Unknown Migration Selection Type.\n"));
781 * Loop over all jobids except the last one, sending
782 * them to start_migration_job(), which will start a job
783 * for each of them. For the last JobId, we handle it below.
786 if (ids.count == 0) {
787 Jmsg(jcr, M_INFO, 0, _("No JobIds found to migrate.\n"));
791 Jmsg(jcr, M_INFO, 0, _("The following %u JobId%s were chosen to be migrated: %s\n"),
792 ids.count, ids.count==0?"":"s", ids.list);
794 Dmsg2(dbglevel, "Before loop count=%d ids=%s\n", ids.count, ids.list);
795 for (int i=1; i < (int)ids.count; i++) {
797 stat = get_next_jobid_from_list(&p, &JobId);
798 Dmsg3(dbglevel, "get_jobid_no=%d stat=%d JobId=%u\n", i, stat, JobId);
799 jcr->MigrateJobId = JobId;
800 start_migration_job(jcr);
801 Dmsg0(dbglevel, "Back from start_migration_job\n");
803 Jmsg(jcr, M_FATAL, 0, _("Invalid JobId found.\n"));
805 } else if (stat == 0) {
806 Jmsg(jcr, M_INFO, 0, _("No JobIds found to migrate.\n"));
811 /* Now get the last JobId and handle it in the current job */
813 stat = get_next_jobid_from_list(&p, &JobId);
814 Dmsg2(dbglevel, "Last get_next_jobid stat=%d JobId=%u\n", stat, (int)JobId);
816 Jmsg(jcr, M_FATAL, 0, _("Invalid JobId found.\n"));
818 } else if (stat == 0) {
819 Jmsg(jcr, M_INFO, 0, _("No JobIds found to migrate.\n"));
823 jcr->previous_jr.JobId = JobId;
824 Dmsg1(dbglevel, "Previous jobid=%d\n", (int)jcr->previous_jr.JobId);
826 if (!db_get_job_record(jcr, jcr->db, &jcr->previous_jr)) {
827 Jmsg(jcr, M_FATAL, 0, _("Could not get job record for JobId %s to migrate. ERR=%s"),
828 edit_int64(jcr->previous_jr.JobId, ed1),
829 db_strerror(jcr->db));
832 Jmsg(jcr, M_INFO, 0, _("Migration using JobId=%s Job=%s\n"),
833 edit_int64(jcr->previous_jr.JobId, ed1), jcr->previous_jr.Job);
834 Dmsg3(dbglevel, "Migration JobId=%d using JobId=%s Job=%s\n",
836 edit_int64(jcr->previous_jr.JobId, ed1), jcr->previous_jr.Job);
846 free_pool_memory(ids.list);
847 free_pool_memory(mid.list);
848 free_pool_memory(jids.list);
852 static void start_migration_job(JCR *jcr)
854 UAContext *ua = new_ua_context(jcr);
857 Mmsg(ua->cmd, "run %s jobid=%s", jcr->job->hdr.name,
858 edit_uint64(jcr->MigrateJobId, ed1));
859 Dmsg1(dbglevel, "=============== Migration cmd=%s\n", ua->cmd);
860 parse_ua_args(ua); /* parse command */
861 int stat = run_cmd(ua, ua->cmd);
863 Jmsg(jcr, M_ERROR, 0, _("Could not start migration job.\n"));
865 Jmsg(jcr, M_INFO, 0, _("Migration JobId %d started.\n"), stat);
870 static bool find_mediaid_then_jobids(JCR *jcr, idpkt *ids, const char *query1,
874 POOL_MEM query(PM_MESSAGE);
877 /* Basic query for MediaId */
878 Mmsg(query, query1, jcr->rpool->name());
879 if (!db_sql_query(jcr->db, query.c_str(), unique_dbid_handler, (void *)ids)) {
880 Jmsg(jcr, M_FATAL, 0, _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
883 if (ids->count == 0) {
884 Jmsg(jcr, M_INFO, 0, _("No %ss found to migrate.\n"), type);
885 ok = true; /* Not an error */
887 } else if (ids->count != 1) {
888 Jmsg(jcr, M_FATAL, 0, _("SQL error. Expected 1 MediaId got %d\n"),
892 Dmsg1(dbglevel, "Smallest Vol Jobids=%s\n", ids->list);
894 ok = find_jobids_from_mediaid_list(jcr, ids, type);
900 static bool find_jobids_from_mediaid_list(JCR *jcr, idpkt *ids, const char *type)
903 POOL_MEM query(PM_MESSAGE);
905 Mmsg(query, sql_jobids_from_mediaid, ids->list);
907 if (!db_sql_query(jcr->db, query.c_str(), unique_dbid_handler, (void *)ids)) {
908 Jmsg(jcr, M_FATAL, 0, _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
911 if (ids->count == 0) {
912 Jmsg(jcr, M_INFO, 0, _("No %ss found to migrate.\n"), type);
919 static bool regex_find_jobids(JCR *jcr, idpkt *ids, const char *query1,
920 const char *query2, const char *type)
924 uitem *last_item = NULL;
929 POOL_MEM query(PM_MESSAGE);
931 item_chain = New(dlist(item, &item->link));
932 if (!jcr->job->selection_pattern) {
933 Jmsg(jcr, M_FATAL, 0, _("No Migration %s selection pattern specified.\n"),
937 Dmsg1(dbglevel, "regex-sel-pattern=%s\n", jcr->job->selection_pattern);
938 /* Basic query for names */
939 Mmsg(query, query1, jcr->rpool->name());
940 Dmsg1(dbglevel, "get name query1=%s\n", query.c_str());
941 if (!db_sql_query(jcr->db, query.c_str(), unique_name_handler,
942 (void *)item_chain)) {
943 Jmsg(jcr, M_FATAL, 0,
944 _("SQL to get %s failed. ERR=%s\n"), type, db_strerror(jcr->db));
947 Dmsg1(dbglevel, "query1 returned %d names\n", item_chain->size());
948 if (item_chain->size() == 0) {
949 Jmsg(jcr, M_INFO, 0, _("Query of Pool \"%s\" returned no Jobs to migrate.\n"),
952 goto bail_out; /* skip regex match */
954 /* Compile regex expression */
955 rc = regcomp(&preg, jcr->job->selection_pattern, REG_EXTENDED);
957 regerror(rc, &preg, prbuf, sizeof(prbuf));
958 Jmsg(jcr, M_FATAL, 0, _("Could not compile regex pattern \"%s\" ERR=%s\n"),
959 jcr->job->selection_pattern, prbuf);
962 /* Now apply the regex to the names and remove any item not matched */
963 foreach_dlist(item, item_chain) {
964 const int nmatch = 30;
965 regmatch_t pmatch[nmatch];
967 Dmsg1(dbglevel, "Remove item %s\n", last_item->item);
968 free(last_item->item);
969 item_chain->remove(last_item);
971 Dmsg1(dbglevel, "get name Item=%s\n", item->item);
972 rc = regexec(&preg, item->item, nmatch, pmatch, 0);
974 last_item = NULL; /* keep this one */
980 free(last_item->item);
981 Dmsg1(dbglevel, "Remove item %s\n", last_item->item);
982 item_chain->remove(last_item);
986 if (item_chain->size() == 0) {
987 Jmsg(jcr, M_INFO, 0, _("Regex pattern matched no Jobs to migrate.\n"));
989 goto bail_out; /* skip regex match */
993 * At this point, we have a list of items in item_chain
994 * that have been matched by the regex, so now we need
995 * to look up their jobids.
998 foreach_dlist(item, item_chain) {
999 Dmsg2(dbglevel, "Got %s: %s\n", type, item->item);
1000 Mmsg(query, query2, item->item, jcr->rpool->name());
1001 Dmsg1(dbglevel, "get id from name query2=%s\n", query.c_str());
1002 if (!db_sql_query(jcr->db, query.c_str(), unique_dbid_handler, (void *)ids)) {
1003 Jmsg(jcr, M_FATAL, 0,
1004 _("SQL failed. ERR=%s\n"), db_strerror(jcr->db));
1008 if (ids->count == 0) {
1009 Jmsg(jcr, M_INFO, 0, _("No %ss found to migrate.\n"), type);
1014 Dmsg2(dbglevel, "Count=%d Jobids=%s\n", ids->count, ids->list);
1015 foreach_dlist(item, item_chain) {
1024 * Release resources allocated during backup.
1026 void migration_cleanup(JCR *jcr, int TermCode)
1028 char sdt[MAX_TIME_LENGTH], edt[MAX_TIME_LENGTH];
1029 char ec1[30], ec2[30], ec3[30], ec4[30], ec5[30], elapsed[50];
1030 char ec6[50], ec7[50], ec8[50];
1031 char term_code[100], sd_term_msg[100];
1032 const char *term_msg;
1033 int msg_type = M_INFO;
1037 JCR *mig_jcr = jcr->mig_jcr;
1038 POOL_MEM query(PM_MESSAGE);
1040 Dmsg2(100, "Enter migrate_cleanup %d %c\n", TermCode, TermCode);
1041 update_job_end(jcr, TermCode);
1042 memset(&mr, 0, sizeof(mr));
1045 * Check if we actually did something.
1046 * mig_jcr is jcr of the newly migrated job.
1049 mig_jcr->JobFiles = jcr->JobFiles = jcr->SDJobFiles;
1050 mig_jcr->JobBytes = jcr->JobBytes = jcr->SDJobBytes;
1051 mig_jcr->VolSessionId = jcr->VolSessionId;
1052 mig_jcr->VolSessionTime = jcr->VolSessionTime;
1053 mig_jcr->jr.RealEndTime = 0;
1054 mig_jcr->jr.PriorJobId = jcr->previous_jr.JobId;
1056 update_job_end(mig_jcr, TermCode);
1058 /* Update final items to set them to the previous job's values */
1059 Mmsg(query, "UPDATE Job SET StartTime='%s',EndTime='%s',"
1060 "JobTDate=%s WHERE JobId=%s",
1061 jcr->previous_jr.cStartTime, jcr->previous_jr.cEndTime,
1062 edit_uint64(jcr->previous_jr.JobTDate, ec1),
1063 edit_uint64(mig_jcr->jr.JobId, ec2));
1064 db_sql_query(mig_jcr->db, query.c_str(), NULL, NULL);
1066 /* Now mark the previous job as migrated if it terminated normally */
1067 if (jcr->JobStatus == JS_Terminated) {
1068 Mmsg(query, "UPDATE Job SET Type='%c' WHERE JobId=%s",
1069 (char)JT_MIGRATED_JOB, edit_uint64(jcr->previous_jr.JobId, ec1));
1070 db_sql_query(mig_jcr->db, query.c_str(), NULL, NULL);
1073 if (!db_get_job_record(jcr, jcr->db, &jcr->jr)) {
1074 Jmsg(jcr, M_WARNING, 0, _("Error getting Job record for Job report: ERR=%s"),
1075 db_strerror(jcr->db));
1076 set_jcr_job_status(jcr, JS_ErrorTerminated);
1079 bstrncpy(mr.VolumeName, jcr->VolumeName, sizeof(mr.VolumeName));
1080 if (!db_get_media_record(jcr, jcr->db, &mr)) {
1081 Jmsg(jcr, M_WARNING, 0, _("Error getting Media record for Volume \"%s\": ERR=%s"),
1082 mr.VolumeName, db_strerror(jcr->db));
1083 set_jcr_job_status(jcr, JS_ErrorTerminated);
1086 update_bootstrap_file(mig_jcr);
1088 if (!db_get_job_volume_names(mig_jcr, mig_jcr->db, mig_jcr->jr.JobId, &mig_jcr->VolumeName)) {
1090 * Note, if the job has failed, most likely it did not write any
1091 * tape, so suppress this "error" message since in that case
1092 * it is normal. Or look at it the other way, only for a
1093 * normal exit should we complain about this error.
1095 if (jcr->JobStatus == JS_Terminated && jcr->jr.JobBytes) {
1096 Jmsg(jcr, M_ERROR, 0, "%s", db_strerror(mig_jcr->db));
1098 mig_jcr->VolumeName[0] = 0; /* none */
1100 switch (jcr->JobStatus) {
1102 if (jcr->Errors || jcr->SDErrors) {
1103 term_msg = _("%s OK -- with warnings");
1105 term_msg = _("%s OK");
1109 case JS_ErrorTerminated:
1110 term_msg = _("*** %s Error ***");
1111 msg_type = M_ERROR; /* Generate error message */
1112 if (jcr->store_bsock) {
1113 bnet_sig(jcr->store_bsock, BNET_TERMINATE);
1114 if (jcr->SD_msg_chan) {
1115 pthread_cancel(jcr->SD_msg_chan);
1120 term_msg = _("%s Canceled");
1121 if (jcr->store_bsock) {
1122 bnet_sig(jcr->store_bsock, BNET_TERMINATE);
1123 if (jcr->SD_msg_chan) {
1124 pthread_cancel(jcr->SD_msg_chan);
1129 term_msg = _("Inappropriate %s term code");
1133 if (jcr->previous_jr.JobId != 0) {
1134 /* Mark previous job as migrated */
1135 Mmsg(query, "UPDATE Job SET Type='%c' WHERE JobId=%s",
1136 (char)JT_MIGRATED_JOB, edit_uint64(jcr->previous_jr.JobId, ec1));
1137 Dmsg1(000, "Mark: %s\n", query.c_str());
1138 db_sql_query(jcr->db, query.c_str(), NULL, NULL);
1140 term_msg = _("%s -- no files to migrate");
1143 bsnprintf(term_code, sizeof(term_code), term_msg, "Migration");
1144 bstrftimes(sdt, sizeof(sdt), jcr->jr.StartTime);
1145 bstrftimes(edt, sizeof(edt), jcr->jr.EndTime);
1146 RunTime = jcr->jr.EndTime - jcr->jr.StartTime;
1150 kbps = (double)jcr->SDJobBytes / (1000 * RunTime);
1154 jobstatus_to_ascii(jcr->SDJobStatus, sd_term_msg, sizeof(sd_term_msg));
1156 Jmsg(jcr, msg_type, 0, _("Bacula %s %s (%s): %s\n"
1157 " Build OS: %s %s %s\n"
1158 " Prev Backup JobId: %s\n"
1159 " New Backup JobId: %s\n"
1160 " Migration JobId: %s\n"
1161 " Migration Job: %s\n"
1162 " Backup Level: %s%s\n"
1164 " FileSet: \"%s\" %s\n"
1165 " Read Pool: \"%s\" (From %s)\n"
1166 " Read Storage: \"%s\" (From %s)\n"
1167 " Write Pool: \"%s\" (From %s)\n"
1168 " Write Storage: \"%s\" (From %s)\n"
1171 " Elapsed time: %s\n"
1173 " SD Files Written: %s\n"
1174 " SD Bytes Written: %s (%sB)\n"
1175 " Rate: %.1f KB/s\n"
1176 " Volume name(s): %s\n"
1177 " Volume Session Id: %d\n"
1178 " Volume Session Time: %d\n"
1179 " Last Volume Bytes: %s (%sB)\n"
1181 " SD termination status: %s\n"
1182 " Termination: %s\n\n"),
1183 my_name, VERSION, LSMDATE, edt,
1184 HOST_OS, DISTNAME, DISTVER,
1185 edit_uint64(jcr->previous_jr.JobId, ec6),
1186 mig_jcr ? edit_uint64(mig_jcr->jr.JobId, ec7) : "0",
1187 edit_uint64(jcr->jr.JobId, ec8),
1189 level_to_str(jcr->JobLevel), jcr->since,
1190 jcr->client->name(),
1191 jcr->fileset->name(), jcr->FSCreateTime,
1192 jcr->rpool->name(), jcr->rpool_source,
1193 jcr->rstore?jcr->rstore->name():"*None*",
1194 NPRT(jcr->rstore_source),
1195 jcr->pool->name(), jcr->pool_source,
1196 jcr->wstore?jcr->wstore->name():"*None*",
1197 NPRT(jcr->wstore_source),
1200 edit_utime(RunTime, elapsed, sizeof(elapsed)),
1202 edit_uint64_with_commas(jcr->SDJobFiles, ec1),
1203 edit_uint64_with_commas(jcr->SDJobBytes, ec2),
1204 edit_uint64_with_suffix(jcr->SDJobBytes, ec3),
1206 mig_jcr ? mig_jcr->VolumeName : "",
1208 jcr->VolSessionTime,
1209 edit_uint64_with_commas(mr.VolBytes, ec4),
1210 edit_uint64_with_suffix(mr.VolBytes, ec5),
1215 Dmsg1(100, "migrate_cleanup() mig_jcr=0x%x\n", jcr->mig_jcr);
1217 free_jcr(jcr->mig_jcr);
1218 jcr->mig_jcr = NULL;
1220 Dmsg0(100, "Leave migrate_cleanup()\n");
1224 * Return next DBId from comma separated list
1227 * 1 if next DBId returned
1228 * 0 if no more DBIds are in list
1229 * -1 there is an error
1231 static int get_next_dbid_from_list(char **p, DBId_t *DBId)
1237 for (int i=0; i<(int)sizeof(id); i++) {
1240 } else if (*q == ',') {
1249 } else if (!is_a_number(id)) {
1250 return -1; /* error */
1253 *DBId = str_to_int64(id);
1257 bool set_migration_wstorage(JCR *jcr, POOL *pool)
1259 POOL *wpool = pool->NextPool;
1262 Jmsg(jcr, M_FATAL, 0, _("No Next Pool specification found in Pool \"%s\".\n"),
1267 if (!wpool->storage || wpool->storage->size() == 0) {
1268 Jmsg(jcr, M_FATAL, 0, _("No Storage specification found in Next Pool \"%s\".\n"),
1273 /* If pool storage specified, use it instead of job storage for backup */
1274 copy_wstorage(jcr, wpool->storage, _("Storage from Pool's NextPool resource"));