1 Technical notes on version 1.39
5 Version 1.39.24 released:
7 kes Apply the three patches from Richard Mortimer.
8 bacula-reposition.patch, bacula-tape-reopen.patch, and
9 bacula-eod.patch. This corrects tape positioning on older devices,
10 and also a problem with btape.
11 kes Apply fix from bug report #696 where writing to a FIFO does not
12 work due to a dumb typo.
13 kes Unlock the tape door before the file descriptor is released. This
14 should fix lots of somewhat subtle failures when using an autochanger.
16 kes Correct mtx-changer bug that I introduced in a recent commit, and
17 pointed out by Robert Nelson -- thanks.
18 rbn Fix Windows' daemons so that messages print to stdout if not
20 rbn Add daemon name to trace file name (eg bacula-dir.trace).
21 rbn Fix environment variable expansion in directory names on Windows.
22 rbn Fix autochanger support in fill command.
23 rbn Update SQL scripts to match Unix versions.
24 rbn Fix daemon usage displays.
25 rbn Cleanup bacula-dir.conf template.
26 rbn Install openssl.cnf so that the openssl.exe installed in the
27 Bacula\bin directory can be used to generate keys and
28 certificates for TLS and encryption.
29 rbn Fix cleanup of spool files on Windows.
30 rbn Remove /silent option from daemons on Windows. The new default
31 is the same as the old /silent. To enable the message boxes that
32 previously were suppressed by /silent you must add /debug instead.
33 NOTE: As a result of this change, the first time you upgrade from
34 a previous version of 1.39.x you will receive the message
35 boxes when the remove of the old services succeeds. This
36 is the same behaviour as when migrating from a version prior
38 However, going forward, these message boxes will not appear on
39 upgrades or new installs.
40 rbn Add new /debug option. This option enables the message boxes that
41 previously were suppressed by the /silent option. In addition the
42 daemons running as services will open a console window if this
44 rbn Fix bug with service not being removed on migrated installs. This
45 should correct those cases where the file daemon install was failing
46 when upgrading from versions prior to 1.39.x.
49 kes Turn on heap reporting in Dir with zero debug level.
50 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
51 send the same message to stdout.
53 kes Begin work on new GUI "console".
54 kes Make configure look in non-standard MySQL library directory
56 kes Make mtx-changer automatically configure the autochanger wait
57 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
59 kes Correct drop_sqlite_tables.in script to not delete the database.
60 kes When writing to a log file, close and reopen the file descriptor
61 if there is an error writing the file.
62 kes Modify the autochanger loaded?, load, and unload commands to print
63 the full text of any mtx output if there is an error. Helps to
64 ease diagnosis of autochanger problems.
65 kes Correct a few Win32 errno returns in the VSS code so that hopefully
66 a resonable Win32 error message will be printed.
67 kes Convert a few strcat()... to bstrncat() in the Win32 code.
69 rbn Added Windows version of bsmtp.
70 rbn Fixed path search for Windows so that Bacula\bin is automatically
71 searched for programs and scripts.
72 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
75 Version 1.39.24 released:
77 kes Apply dvd find volume patch from Richard Mortimer.
78 kes Eliminate the dvd specific mount routines using only the
80 kes Make update_free_space a method of DEVICE and rename
83 kes Require a messages command acl to be able to receive messages
85 kes Add console, system, and scan job types in util.c.
87 kes Print the Volume purged message only for real jobs to keep
88 from cluttering up the daemon messages.
89 kes Lock the tape drive door while Bacula is using the device.
90 kes Add back the 'No Jobs running' message to FD and SD status because
91 my regression script depends on it, and I'm too lazy to change the
93 kes Start using structure assignments (not too happy about it ...).
94 kes Fix a bug in the tools Makefile that broke on Solaris.
95 kes Unload any autochanger drive during a 'release' command.
97 kes Enhance error message when restoring without bootstrap file.
98 kes Check restored size only for regular files.
99 kes Store Python job level in job record in Dir.
100 kes Add back code to open tape device nonblocking, but if rewind fails
101 release file descriptor.
102 kes Modify acquire.c to first try autoloading the device. Also, ask operator
103 to mount tape if drive cannot be opened.
104 rbn Made Windows service tray status windows resizable.
105 rbn Fixed horizontal scrolling of text in status window.
106 rbn Preserve horizontal and vertical scroll position while
107 updating. This prevents the display being reset to the
108 top line every 5 seconds.
109 rbn Fix Windows cross-compile compatibilty problems with
110 *nix variants such as OS X without the zic command.
111 rbn Eliminate dependency on man2html.
113 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
115 kes Fix a compiler warning in compat.cpp
116 kes Change strcpy to bstrncpy in compat.cpp
117 kes Remove some broken code in bdb_list.c
118 kes Fix, hopefully the last, ACL problem in the restore command.
119 kes Update the README.mingw32
120 kes Add new version of upgrade-win32-client.txt to examples directory.
121 Submitted by Michel Meyers.
122 kes Print an INFO message in the job report when a Volume is marked Purged.
123 rbn Fixed handling of external program and script execution
124 so that the format of the command line is more flexible.
125 Now executable path names containing spaces are translated
126 to the equivalent short name automatically. The result is
127 passed to cmd.exe with the quotes removed.
129 kes Apply the recycle patch from Richard Mortimer.
130 kes Convert a few if statements in dev.c to switch statements.
131 kes Start using print_errmsg instead of bstrerror().
132 kes Print a job message in SD when a job is marked to be canceled.
134 kes All code added back. Fixed block.c read/write to loop only 3
135 times. This apparently keeps the OS from crashing (at least
137 kes The kernel bug still persists. Backup something then immediately
138 do a bscan on the same tape, and the kernel will crash.
139 kes Simplifed tape open(). It no longer uses nonblocking mode, which
140 means that opening with no tape loaded will probably take at least
141 6 minutes before an error is reported.
142 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
143 when doing set_os_device_parameters.
144 kes Report open error in mount.c
145 kes Remove all .exe files from the installer directory on make clean.
147 kes Start adding back removed code.
148 kes Back out a number of changes because backups to tape crash my
150 kes Remove the inetd code from the File daemon.
152 kes Add -c option to pg_dump so that it initializes tables when
154 kes Fix FirstWritten time on Volume to be obtained from SD so that
155 it is the actual time the volume was first written.
156 kes Minor Makefile changes.
157 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
158 ebl Add yes keyword to prune/purge command
160 kes Correct a test in block.c that prevented restore of a DVD from
161 looking at the last part in the spool directory.
162 kes Make some error messages clearer mostly by using the word DVD
163 in the message. Improve infor message in read_record for DVDs.
164 kes Remove DVD kludges in dircmd.c label/relabel.
165 kes Move the dvd relabel code from dircmd.c into
166 write_new_volume_label_to_dvd() adding a relabel argument.
167 kes Rewrite the truncate_dvd() code to be much simpler and
168 more logical. First blow away any spool part, then create a
169 new empty part and write to the DVD.
170 kes Rewrite the can_write_on_non_blank_dvd() code making it
171 only ensure that no valid data is on the DVD -- i.e. it
174 kes Minor Makefile fixes.
175 kes Put attach_dcr_to_dev in a subroutine.
176 kes Make attaching/detaching to/from a device use a flag and
177 only detach if actually attached.
178 kes Add dvd-simulator.in to scripts directory and add to configure.
179 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
180 This could be a cause of a number of drive reservation problems.
181 Note, this code is now in attach_dcr_to_dev().
182 kes Suppress doing Volume updates if it is a system job. This should
183 prevent the DVD label blocking.
184 kes Clear the freespace ok flag in a couple of strategic places.
186 kes Put removing zero sized spool part file in subroutine and
187 call from release_device().
188 kes Add Richard's patch for relabel to dircmd.c, but save and restore
190 kes Rework a lot of subroutines in dev.c to take dcr as an
191 argument. This is done to eliminate the usage of attached_dcrs
193 kes Change truncated_dvd to blank_dvd, which seems more suitable.
194 kes Apply most of Richard Mortimer's truncate patch.
195 kes Create lseek() method for DEVICE that takes dcr as an
196 argument. This is to eliminate the use of attached_dcrs in
197 lseek(). The calls to lseek_dev() must still be changed.
199 kes Apply Richard Mortimer's patches for printing an error
200 message in btape when a DVD is used, and to initialize traceback.
201 kes Added error message to btape when trying to access a file.
202 kes Move prototype of update_slots() to protos.h.
204 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
205 and FDJobStatus to the Director Python variables.
206 kes Make sure valid argument passed to str_to_utime() where Arno
208 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
209 I.e. part of two different patches.
211 kes Modify disk changer to simulate some of the error conditions
213 kes Make sure the close() call in the SD tools is just before the
215 kes Implement dir_get_volume_info() in bls using the patch from
216 Richard Mortimer but call find_num_dvd_parts().
217 kes Implement find_num_dvd_parts() that mounts and scans a DVD
218 and counts the parts.
219 kes Move the omode code in open_dvd() up so that the cannot
220 write on blank disk can check can be bypassed for read mode.
223 kes Disable normal data spooling for DVD writing which uses
224 a different spooling mechanism.
225 kes Apply patch from Richard Mortimer to ensure that the number
226 of DVD parts is correctly updated.
227 rbn Save installer details log in the Bacula directory as
229 rbn Add installer generation of client and storage templates
230 suitable for @inclusion on the director.
231 rbn Mark previously installed Win32 components read-only since
232 deselection doesn't do anything.
234 Version 1.39.22 beta released:
236 kes Fix logic error in handling error return from mtx-changer
238 kes Make status from SD aware of -1 (unknown) Slot status.
239 kes At Eric's suggestion make both the 'slots' and 'drive' commands
240 to the Storage daemon work even if the drive is busy.
241 kes Make two separate Win32 menu links for starting bconsole and
242 wx-console in winbacula.nsi
243 kes Apply DVD part_spooled patch from Richard Mortimer
244 richm@oldelvet.org.uk
245 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
246 rbn Fixed problems migrating settings from previous releases in
247 Win32 installer. Add Readme.txt with an option to show it on
248 the installer Finish page.
250 kes Use get_catalog_resource() to open catalog database
251 to ensure that ACLs are respected and that user is
252 correctly prompted for database.
253 kes Integrate multiple console/director patch from
254 Carsten Paeth calle@calle.in-berlin.de
255 ebl Add character substitution in Job/JobDefs WriteBootStrap.
256 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
257 kes Apply patch supplied in bug #656 to pass priority field
258 in the run dialog to the Director in gnome console
259 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
260 this will fix bug #627 where Bacula eventually gets
261 confused about what Volume it wants.
262 kes Add a new close_part() class in the SD to save the device
263 state around open/close_part/open for DVD writing. This
264 should fix the num_dvd_parts getting zeroed as reported by
266 kes Apply patch from Richard Mortimer that correct edit code
267 for debug output of st_size.
268 ebl Add support of encrypted data stream to bscan.
269 display data_len instead of data content (may be binary)
271 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
272 bcopy. Fixes bug #669 reported by Eric.
273 kes Fix incorrect number of arguments in SQL statement in
274 sql_get.c as reported by Eric.
276 kes Update examples directory.
277 kes Remove unused variable in winservice.cpp
278 kes Make Win32 make command build installer.
279 rbn Add new Install Type page, used to select between Automatic
280 and Custom installs. Automatic installs only prompt for
281 configuration items that can't be reasonably defaulted.
282 rbn Added Bacula logo to page headers.
283 rbn Added Upgrade support
284 - Configuration and component selection are migrated from
286 - Configuration of upgraded components is preserved and
288 - Configuration of new components is handled according to
289 the Automatic / Custom selection.
290 - Component selection is defaulted to previously selected
292 rbn Installation of Server components is disabled on
293 Windows 95, 98 and ME.
294 rbn Added URLs for support, info and upgrades to Bacula entry
295 in Add/Remove Programs.
296 rbn Added Version info to Bacula entry in Add/Remove Programs.
298 kes Correct dvd code that breaks tape labeling.
299 kes Implement Enabled on update slots.
301 kes When doing a label, pass the VolBytes back to the Director,
302 which puts it in the catalog.
303 kes Print an error message if the user attempts to prune an
305 kes Need to start using %ld when sscanfing 32 bit values.
307 kes Correct the counting of VolCatBytes for DVDs.
308 kes Add code to mount.c to require that VolCatBytes corresponds to
309 what is actually found when doing an append.
310 kes Update freespace only after writing on the DVD.
311 kes Remove code that blows away the current part in the spool file.
313 kes Apply new dvd-handler patch from Richard Mortimer.
314 kes Tweak so that debug level 20 shows only DVD commands.
315 kes Correct spooled_part flag in dev.c close() so that it is cleared
316 when the spool file is deleted or does not exist.
317 kes Print part number in read_records when eof hit (restore).
318 rbn Installer default changed to start services on new install.
320 kes Make find with no args in tree restore return error rather than
321 stopping the selection. Fixes bug #665
322 kes Rework DVD writing to ensure that the last part is written
323 on open_next_part when dealing with a spool file.
324 kes Correct the lseek_dev() routine to handle end point correctly
325 (bug introduced by me).
326 kes Allow part number to exceed num_dvd_parts in lseek_dev().
327 rbn Change make_session_key on Windows to use WIN32 APIs to produce
329 rbn Add new tool scsilist.exe which displays the changer, tape and
330 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
331 to add them to bacula-sd.conf.
333 kes Apply dvd-handler patch from Richard Mortimer.
334 kes Apply dvd error check patch from Richard Mortimer.
335 kes Apply bpipe race patch from Richard Mortimer.
336 kes Rework how DVD labels are handled and set append only
337 when part > num_dvd_parts.
339 kes Rework many features of DVD writing and reading. Added many error
340 messages. Most importantly changed part to represent the current
341 part number base zero. This makes current DVD writing incompatible
342 with previous version.
344 kes Add host:port to connect failure messages to FD and SD from Dir.
345 kes Add WhereACL to console ACL list. If nothing is specified, only
346 the default is permitted for restore. Otherwise, *all* allows any
347 path, or you can specify permitted paths. This should allow control
348 over where users can restore files. This is untested.
349 kes Modified message to add a ? (as in loaded?) when querying the autochanger
350 for what Slot is loaded.
351 kes Fixed the use of Slot, so that is more correctly maintained, thus
352 eliminating unneeded duplicate calls to determine what Slot is loaded.
354 kes Install man pages with 'make install'
355 kes wx-console crashes because of differences between Bacula and wxWidgets
356 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
358 kes correct improper indenting in wx-console/console_conf.c
359 kes update wx-console header copyrights
360 kes Fix bug #658 where wx-console mangles file/directory names containing
363 kes Add Media.Enabled flag to client backups for dotcmds.c
364 kes Enforce Media.Enabled=1 for a current restore to work.
365 kes Require restore case 3 to have sqlquery permission to work.
366 kes Remove obsolete del_MAC sql command.
367 kes Ensure that bscan creates Volumes with Enabled=1.
369 Version 1.39.20 beta released:
371 kes Correct missing Client table reference in SQL pointed out by
374 kes Fix Win32 build (new entrypoint, start baculafd).
376 kes Add -n option to bconsole to turn off conio.
377 kes Print JobIds to be migrated in Job Report.
378 kes Add additional user supplied notes to the messages part of
379 bacula-dir.conf concerning multiple email addresses.
380 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
381 kes Add more recent Feature requests to Projects file.
383 kes Apply Maritn's fix to src/win32/Makefile.
384 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
385 kes Implement pruning for Migration and migrated jobs.
386 kes Implement PoolOccupancy migration.
387 kes Implement PoolTime migration.
389 kes If doing a mount, look for a slot, and if specified pass it to
390 the SD so that it can load the autochanger.
391 kes Return DVD=1 flag if a label command is done to a DVD. This
392 permits setting VolParts to 1.
393 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
394 rework ua_label code based on DVD media type to use DVD flag returned.
396 kes Eliminate some compile warnings in dird_conf.c
397 kes Format the bytes field in the terminated jobs part of the status
398 command for the three daemons with suffixes to reduce print size
399 of backup bytes. Suggested by a user.
400 kes When not descending into a directory, print the File= name that
401 triggered it -- makes why not descending a bit clearer.
402 kes Do not unload autochanger when doing a list command -- basic code
403 from Eric Bollengier.
405 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
406 to build-depkgs-mingw32. It now handles two options -h to display
407 help and -C to reextract the source and apply the patches. The -C
408 option is useful for updating the source after new patches are
410 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
411 This allows updating to new versions without having to modify the
412 script and makes it easier to figure out which packages and which
414 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
415 as build-depkgs-mingw32 except they are built using Microsoft Visual C
416 and placed in the depkgs-msvc directory. There is also an
417 External-msvc file to describe the packages.
419 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
421 kes Fix bug #462 incorrect error message printed when client script called
422 from File= was not found.
423 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
424 do a rewind on Solaris when no tape is in the drive (Solaris does not
425 have the detailed errno found on Linux). Added Solaris specific code.
426 Note, this may apply to other OSes as well.
428 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
429 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
430 fix bug 648 - update sqlite script patches, lock out gnome2console
431 builds for platforms with gtk+ < 2.4.
432 Updated build_rpm.sh - add remote source directory, add switch for
433 signing, refine file names.
434 Updated spec file again for Mandriva build as they have this curious
435 custom of silently converting all manpages to bzip2 format just before
436 the final packaging step.
438 rbn Fixed the Windows Makefiles so that they won't accidentally try and
439 pickup binaries for the Unix build. This allows both the Unix
440 build and the Windows build to be built in the same tree without
441 interfering with each other.
442 rbn Fixed error handling and cleaned up mtx-changer.cmd.
443 rbn Added the rest of the database scripts. These are installed but are
444 not yet edited for variable replacement.
445 rbn Broke out the cats functionality from bacula.dll and put into new
446 separate dlls for each database type. At installation time the
447 correct one is copied to bacula_cats.dll.
448 rbn Eliminate the need to install the mysql.dll on client only builds.
449 rbn Moved dird/sql_cmds.c into the cats directory so all the database
450 specific #ifdefs were in the cats directory.
451 rbn Added a new sql_cmds.h with all the declarations for the variables
452 exported from sql_cmds.c.
453 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
454 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
456 kes Correct improperly formatted list command output reported by Dan.
458 kes Correct despool time calculation.
460 kes Remove previous changes to compat.cpp as they create problems.
461 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
462 kes Attempt to fix problems with the msg_queue crashing on Solaris
463 when Bacula is terminating, but problems remain.
464 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
465 name editing problems with too many \\?\es.
466 kes Fix some Bacula source code style problems in compat.cpp.
467 kes Add debug code to compat.cpp and convert non-Bacula debug code
470 kes Change the name of the technical notes file from kes-1.39 to
471 technotes-1.39. Prefix my messages with 'kes '.
472 kes Allow dequeue_messages() to be called twice. Should fix bug
474 kes Add Job type to bscan Job information output.
476 kes Update copyright date in program files, and for the most part
478 kes Implement %q in bsnprintf.c apparently I forgot it.
480 kes Make disk-changer sed command compatible with FreeBSD.
481 kes Make a first cut at a ReleaseNotes and ChangeLog for a
483 kes Make make clean descend into the src/win32 directory.
484 kes Fix some #ifdefing so that Solaris and FreeBSD compile
485 sys/stat.h was turned off.
486 kes Use suffix editing for new transfer rate messages.
487 kes Attempt to come up with a workaround which seems to be an OS
488 bug where write() returns EBUSY. IMO this should not happen.
489 It triggered in truncatebug test. The workaround retries using
491 kes Eliminate a strerror() call in a class method that failed with
493 kes Use rm -rf rather than rmdir to delete the src/win32/release
494 directory during make clean.
496 kes Make bscan ignore ACL streams.
497 kes Update projects files with new Feature Requests.
498 kes Generate current English and French manuals and upload
500 kes Update the home page to include the new British/French flags to
501 switch between translations. Work done by Alexandre Baron.
502 kes Make disk-changer script print an error message if the changer
503 directory is not defined.
504 kes Create a generic DB routine for getting an int (32/64 bit) from
506 kes Add more migration code.
507 kes Add a few more files to .cvsignore here and there.
508 kes Minor fixes for SD write rate and despooling rate.
509 kes Turn off new test code in src/console.c
513 kes Incremented the version number to signify that all of Robert's code
514 for Win32 that was in the branch is now integrated into the HEAD,
515 and that Eric has submitted code that we hope will provide limited
516 backward compatibility with 1.38 file daemons (more testing to be
518 kes I rationalized a few of the names of the variables (mainly jcr names)
519 that are used during migration as keeping three different jcrs at the
520 same time clear in ones head is not easy.
524 eb Tweak new runscript feature to work with 1.38.x FDs.
525 eb Correct crypto.c to fix segfault when restoring an encrypted stream
526 on fd which don't use rsa keys.
527 eb Add yes/no English keywords on localized yes/no questions.
529 kes Several important commits from Robert Nelson for code cleanup and
531 kes Modify console.c so that when conio is enabled, it converts \n to
532 \n\r before outputting to the console. Hopefully this will fix
533 the problems with expect in Perl that Eric saw.
535 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
537 kes Add Comment field to llist of a volume.
538 kes Allow true/false in some yes/no questions.
539 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
540 kes Remove a few /n's when scanning commands from another daemon. This
541 permits adding additional fields later.
542 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
543 kes Update README.mingw
545 kes Tweak authentication to work with 1.38.x FDs.
546 kes Tweak catalog make scripts.
547 kes Fix catalog upgrade scripts so that they work.
548 kes Correct despooling debug code to eliminate race condition.
550 kes Add additional fields as specified by Arno to LocationLog.
551 kes Add comment field to the Media record.
552 kes Add Time field to the Log record.
553 kes Correct migration SQL (thanks to Bill Moran) so that it
554 runs with PostgreSQL also.
555 kes Add spooling/despooling info in status output of SD.
557 kes Spend a lot of time integrating mkcdrec with the rescue disk.
558 kes Add VOLMGMT message class for volume management messages (none yet).
559 kes Add CATALOG as a destination. It goes into the LOG table.
560 kes Implement the Log table in the DB.
561 kes Implement the Location Log table in the DB (for user use).
562 kes At Eric's request add a run_scripts() just after blast_data in
565 kes Add Enabled column to Location, correct some typos in DB schemas.
566 kes Correct bug I introduced into RunScripts enum.
567 kes Add log table to Catalog
568 kes Purge original job migrated if the migration terminates normally.
569 kes Cleanup purging of files/jobs so that it is done only in a
571 kes Add new VOLMGMT message class.
572 kes Add Catalog message destination (user conf code remains to be written).
574 kes Modify read_record and friends to properly deal with migration
576 kes Update debug code in read_record.
578 ======================= Warning ==========================
579 Separate read and write storage in Jobs in the Director. This
580 is a major rewrite of some of the low level code and hence has
581 a high probability of introducing bugs.
582 ==========================================================
584 kes Move the job init code up to *before* the job is put into
585 the job queue (resource allocation queue). This permits the
586 job to establish whether it will read or write or do both.
587 kes Add name() methods to all the resource classes.
588 kes Implement separate read and write storage resource
589 allocation/deallocation in jobq.c
591 ======================= Warning ==========================
592 Implemented new method of getting the default Storage from the Media
593 record rather than from the MediaType for restore. As a fall
594 back, if no Storage is defined, use the MediaType. This
595 eliminates most all prompts if there are multiple MediaTypes
596 used. This is an important and fundamental change.
597 ==========================================================
599 kes Add more detail (Storage, Device) to list of volumes printed
601 kes More code in migrate. In particular start multiple jobs if
603 kes Probably overkill, but ensure that the bsr is unique even within a
605 kes Rework bsys.c drop() so that it now should work as expected.
606 kes Update a bunch of old copyrights -kes particularly in .h files.
607 kes Remove src/lib/bshm.c/h
611 ======================= Warning ==========================
612 All hash codes in the database are now kept in world
613 compatible base64 format (no = filling). This means that
614 all FileSets will be updated and if you are running
615 verify jobs, you must do an InitCatalog.
616 Authentication uses the new algorithm, but should be
617 backward compatible with 1.38.x
618 ===========================================================
620 kes Modify the authentication routines so that the 1.39.15 Director
621 always runs with the compatible binary to base64 code (same as
622 the rest of the world). It will however detect if an SD or
623 FD is running the old code and if that is the case, will use
624 the old algorithm for authentication. However, all consoles must
625 use the compatible algorithm, and all data entered into the database
626 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
627 use the compatible algorithm.
628 kes Rename the cram_md5 routine names to be slightly more appropriate
629 to what they are doing (challenge and respond).
630 kes Robert committed his #ifdef and header cleanup.
632 kes Fix a compiler warning in files/backup.c
633 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
635 kes Robert committed his low impact changes.
636 kes I removed a size_t from the jcr.h definition.
637 kes Update the tape regression scripts (still to be tested).
638 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
639 kes Require done or quit to exit from in memory tree restore.
641 kes Write install/uninstall of new manpages. There are now a
642 pile of man pages. Some of which need a lot of work.
644 ======================= Warning ==========================
645 The --mandir ./configure option now points to the top level
646 man directory. The man files will be installed under
647 mandir/man8 and mandir/man1 as appropriate.
648 ==========================================================
650 kes Add complete text of GPL to LICENSE.
651 kes Implement job report that indicates where Storage and Pool
652 came from -kes with overrides and Pool storage and NextPool,
653 it is all very complicated.
654 kes Create a few common subroutines for backup.c and migrate.c
655 kes Eliminate warning messages from tray-monitor.c
657 kes Apply fix for scheduler for missing unlock_jobs().
658 kes Clean out autoconf caches before rebuilding configure
659 kes Fix the FreeBSD pthreads lib define updated by Dan.
660 kes Add missing semicolon in src/console/console.c
661 kes Add Robert's enhanced version of build-win32-cross-tools
662 as well as his patch file.
663 kes Note, the new gcc options are likely to break building of
664 wx-console or the tray-monitor ...
666 kes Implement Robert's suggestion to suppress printing compile lines.
667 kes Detect GCC correctly (I hope)
668 kes If using GCC (actually g++) add the following compiler flags
669 -fno-strict-aliasing -fno-exceptions -fno-rtti
671 ===================== Warning =============================
672 Turn on new bsnprintf() code. This could cause print output
674 ===========================================================
676 kes Fix crypto when not using openssl. I previously overlooked this.
677 kes Eliminate crypto type punning problems by eliminating void * and
678 using uint8_t * instead.
679 kes Harden authentication failure in FD by single threading errors
680 and forcing a 6 second wait.
682 ===================== Warning =============================
683 Removed 'Accept Any Volume' directive.
684 ===========================================================
686 kes Major cleanup and simplification of regress using shell functions
687 (more tests to be converted to new format)
688 kes Add detection of 64 bit Irix as indicated by user.
689 kes Increment catalog database id from 9 to 10.
690 kes Add a few of the new database fields to the various C++
692 kes Implement code to fill in the most important new fields (e.g.
694 kes Ensure that most of the new fields are in create/get/insert/update.
695 More work to be done.
697 kes Update some very old licenses in src/cats.
698 kes Modify the database format for handling Migration jobs:
699 Add PriorJobId, RealEndTime to Job table
701 Remove Stripe from JobMedia record (not used, wasting space)
702 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
703 Add Cost to Location table.
704 kes Delete mac_record subroutines.
705 kes Add new table values to create/update/get routines as appropriate.
706 kes Update the update_tables and make_tables scripts.
707 kes Make a first cut in using a union where multiple pointers (actually
708 pointers to pointers) are stored.
709 kes Make some changes to base64.c suggested by Robert and others and add
710 a small amount of documentation.
711 kes Add some changes suggested by Peter for Solaris (bregex...)
712 kes Make runscript.h always built because it needs to be pulled into
713 more places. In particular its RES was left out of a union.
714 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
715 This makes it slightly easier to detect uninitialized variables.
717 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
718 sometimes creates install problems.
719 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
720 Nelson's code. More to do.
721 kes Convert a few store_bit to store_bool in filed_conf.c.
722 kes DVD tweak to block.c as supplied by Uwe Muessel.
724 kes Modify configure.in to check for typeof().
725 kes In findlib/attribs.c use typeof instead of templates if possible.
727 kes Implement partial error messages for src/filed/acl.c
728 kes Fix return code to fail when doing update barcodes and
729 Pool resource is not found. This previously caused Volumes
730 to be labeled as cleaning tapes.
731 kes Small updates to projects.
733 kes Add Eric Bollengier patch for new RunScript directive. It breaks
734 compatibility between dird and fd.
736 kes Prevent DVD code from rewriting label if the device cannot be
738 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
739 fix Debian build bug.
740 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
741 kes Integrate manpages contributed by Jose Luis.
742 kes Update projects file.
743 kes Add manpages Makefile.in to configure.in
744 kes Remove installation of bacula.8 in scripts directory.
746 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
748 O_NOATIME is a open() flag which makes it possible to read a file without
749 updating the inode atime (and also without the inode ctime update which
750 happens if you try to set the atime back to its previous value). It also
751 prevents a race condition when two programs are reading the same file, but
752 only one does not want to change the atime. It's most useful for backup
753 programs and file integrity checkers (and bacula can fit on both
756 Recent versions of the Linux kernel and glibc have support for it (the
757 glibc support being mostly copying the O_NOATIME definition to
758 bits/fcntl.h). If there's no support for it on the kernel, trying to use
759 it does nothing (since the kernel ignores unknown flags).
761 If the kernel has support for it, trying to use it either works, fails
762 silently (mostly in remote filesystems), or returns errno=EPERM (if you
763 are not either the owner of the file or root). A simple way to prevent the
764 failure is to open the file without the flag and set it later with
765 fcntl(F_SETFL), ignoring any EPERM errors.
766 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
767 of restarted jobs to complete (due to a destroyed pthreads conditional
768 variable used by the message thread).
769 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
771 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
772 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
773 colons in query.sql file.
774 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
775 not to create orphans.
776 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
777 in restore long listing.
778 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
779 of incorrect MarkedId.
780 kes Apply patch from adioso bug #616 to correct text in manual (replace
781 Director with File daemon).
782 kes Rework a few of the zlib changes so that they build properly.
785 kes Move DIR 'run' command to SD before starting the message thread
786 as suggested by Cristopher Hull to avoid a race deadlock from
787 two threads using the bsock structure.
788 kes Modify LICENSE to correct some problems pointed out by Debian.
790 kes Correct EOF with no \n lex.c problem.
791 kes Tweak compat.h compat.cpp and merge with apcupsd
792 kes Add additional INFO messages if autochanger cannot be used.
795 kes Simplify Win32 Makefile
796 kes Correct count of buffers/bytes used by smartall.c
797 kes Updated compat.h after porting apcupsd to MinGW.
799 kes Work on getting wx-console building on MinGW. wxWidgets now builds
800 started adding Makefile ...
801 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
803 kes Reloading a bad configuration file doesn't kill director any more.
804 Thanks to fix from Eric Bollengier.
806 kes Fix problem of accents with new Win32 code.
807 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
808 works in the MinGW build with the exception that there
809 is a problem with accented characters -kes i.e. there is
810 some mapping problem with wide characters.
811 kes The code no longer compiles with Microsoft VC++.
813 kes Start implementing Christopher's St.Bernard code.
814 kes Add Christopher's mods for opening files.
815 kes Strip \r \n from Win32 error messages (Christopher)
816 kes Add more info about Win32 system if unknown (Christopher)
817 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
818 kes Fix a number of incorrect strings marked for translation, when
819 they should not be (e.g. commands).
820 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
821 Patches supplied by user in bugs #608 and #599.
822 kes Use most recent of st_ctime and st_mtime in restore tree DIR
823 listing. This fixes some problems with Win32 printing incorrect
825 kes Correct the clock shift comm time calculation between the DIR
826 and the FD. It was added rather than subtracted.
827 kes Strip all backslashes in filenames to be restored on Win32
828 machines -kes the names should all be in Unix format, and if
829 there are any backslashes it is most likely due to an improper
830 FileSet definition, and the files will not otherwise be
832 kes Remove lib/regex.c (replaced by bregex.c).
833 kes Delete src/win32/License.txt
834 kes Modify installer to install LICENSE
836 kes Fix bug in build-win32-cross-tools script reported by Howard
837 kes Implement cross compiled bconsole
839 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
840 kes Write first cut of README.mingw32
841 kes Add back ua_label barcode fix from Rufolf Cejka.
842 kes Integrate the majority of the Mingw cross-tools submission
843 made by Howard Thomson. Everything compiles, with zlib, openssl,
844 and VSS turned off. Linking needs a pthreads library ...
846 kes Add 'Dir Status' button to the gnome console.
847 kes More work on migration.
848 kes Restore non-compatible base64 coding to permit compatibility.
849 kes Display heap stats in Storage daemon without debug level.
851 kes Integrate most of the MinGW changes -kes more to do.
853 kes Implement using pg_config for finding PostgreSQL files.
854 Fixes bug #600. Patch supplied by user.
855 kes Remove -t option from mktemp in mtx_changer.in and use
856 working directory. Fixes bug #578.
857 kes Update job start time after the any run before job so that
858 files created by the script are only backed up once. Fixes
860 kes Strip trailing newline only from filenames entered in
861 the restore command when reading a file. This permits
862 the user to enter filenames with trailing spaces. Fixes
863 bug #549. The user supplied a patch that I modified slightly.
864 kes Use the most recent time (st_mtime, st_ctime) in the dir
865 command in restore. This gives the user a better idea of what
866 the newest file really is. This fixes bug #574. The fix
867 was suggested by the user.
868 kes Implement a compatible version of base64. This permits external
869 programs to duplicate Bacula's base64 algorithm using standard
870 routines. This fixes bugs #296, and 565. Patch submitted by
872 ================= Note ========================
873 Previous Signatures stored in the database are no longer
874 compatible with this. The main downside is for Verify jobs,
875 and doing an InitCatalog run will fix the problem. Also, the
876 authentication between the deamons is changed, so all daemons
877 must be simultaneously upgraded.
878 ==============================================
879 If you don't like this fix, set:
880 const bool compatible = true;
882 const bool compatible = false;
885 kes Ensure that DB signature is never NULL.
886 kes Ensure that DB table names are not translated.
887 kes Fix scheduler to handle time skew (eg daylight savings).
888 kes Fix scheduler to use lock_jobs() to avoid most problems
889 with reload. Window is now milliseconds.
891 kes Apply patch from Christopher Hull
892 kes Allow multiple connections to database with different
894 kes Invalidate the scheduler when doing a reload. Fixes seg
895 fault, but still 60 second window.
896 kes Additional info in Reschedule message.
897 kes Use set_jcr_job_status() everywhere to prevent loss of
899 kes Display peer IP in FD if error from connecting DIR.
900 kes Don't increment file count for DIRBEGIN.
901 kes Replace illegal characters in Win32 filename by _.
902 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
903 kes Hash hard link filenames rather than linked list.
904 kes Fix for security failure in chdir on Win32.
905 kes Add CreateDirectoryA/W win32 API entry points.
906 kes Add /silent option to Win32 FD for Install/Remove service.
907 kes Always print Heap statistics in FD.
909 kes Remove the -f option from the chown in Makefile.in for more
911 kes Change setting the group in Makefile.in to use chgrp for
913 kes Implement a write_store and read_store to replace
914 dirstore in reserve.c
915 kes Implement a Bacula read/write lock for Python rather
916 than using the Python lock to avoid recursive problems.
917 kes Correct the uninstall directory names in filed/Makefile.in
918 as reported by a user.
920 kes Correct some problems with database creation (new tables).
921 kes Replace a bunch of old 0x%x by %p.
922 kes Get first cut of Migration with Job selection working.
924 kes Change store_bit() to store_bool() for the Spooling in
925 dird_conf.c -kes bug reported by Robert Nelson.
927 kes Correct Makefile bug found by Dan Langille.
929 kes Correct Makefile for Solaris /bin/sh
930 kes Correct mtx-changer.in for Solaris /bin/sh
931 kes Abort if a conf resource does not have a Name =
933 kes Change the name of the regex program to bregex.
934 kes Add the bwild program to the tools directory. It is similar
935 to the bregex program.
936 kes Implement create bregex.h and bregex.c in src/lib from the
937 Python regexp program.
938 kes Use the new bregex.c to implement Regex expressions on Win32.
940 kes More work on migration.
941 kes Implement wild program in tools directory for testing
942 wild-cards. Almost identical to the regex program.
943 kes Up port VSS single thread locking code.
944 kes Replace N_(..) by NT_(...) to inhibit translation of
946 kes Modify Makefile to change the permissions on Working Directory
947 to 770 if the directory is created.
948 kes Do not fail the Makefile if changing the permissions or
949 owner/group on WorkingDir fails.
950 kes Remove early selection of Scratch Volumes in the recycling
952 kes Correct the old recycling algorithm so that Scratch Volumes
953 are selected when looking for a Volume in the changer.
954 kes Correct a typo in the Verify SQL reported by Joe Park.
956 kes Remove automatic case folding on Windows FDs. You must
957 explictly use the 'Ignore Case = yes' option.
958 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
959 scratch volume in an Autochanger early in the 'recycling'
962 kes Make weof() and clrerror() methods of class DEVICE.
964 kes Tweak license to include Microsoft restrictions.
965 kes Move mysql.reconnect to after real_connect(). Thanks to
966 Frank Sweetser for the patch.
967 kes Disallow a backslash in a File = directive (Windows junk)
968 unless the string is quoted.
969 kes Apply Eric's patch to ua_label.c so that daemon protocol
971 kes Add NT_ definition for strings that should not be translated.
972 kes Apply NT_() to ua_label.c
973 kes Remove timed wait for VSS on Win2K3 as it is not yet
975 kes Correct bacula.in script to reference bacula-ctl-xx in the
976 sysconfig directory rather than the bin directory.
978 kes Fix a long standing bug in the bacula start/stop scripts.
979 kes Attempt to add the new bacula-ctl-* files to the rpm.
980 kes Switch to using typeof() for list traversing to avoid
981 as many FC5 g++ compiler warnings as possible.
983 kes Split the bacula start/start script into four files:
984 bacula -kes starts and stops calling other scripts
985 bacula-ctl-dir -kes starts/stops the director
986 bacula-ctl-fd -kes starts/stops the File daemon
987 bacula-ctl-sd -kes starts/stops the Storage daemon
989 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
990 kes Correct editing of JobId from int to int64 in fd_cmds.c
991 kes Eliminate FileSet name race with bash_spaces() and multiple
992 threads by bashing in a local.
993 kes Fix error return from 'use storage' to print a correct error
994 message rather than nothing.
995 kes Correct false re-read last block error message when two jobs
996 are simultaneously writing at the end of a tape.
997 kes Simplify exit conditions in the reserve.c code to avoid
998 possible non-release of reservation_lock().
999 kes Suffle lock order in reserve to avoid deadlock between
1000 reservation lock and device mutex.
1002 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1003 tracking this down for me !!!! as it broke the Win32 build.
1005 kes Integrate addition of line count limitation to bsmtp -l from
1006 Sebastian Stark <stark at tuebingen.mpg.de>
1008 kes Implement regex test program in tools directory.
1009 kes Attempt to fix time problem with bsmtp with foreign langs.
1010 kes Add strip_trailing_newline() submitted by user.
1011 kes Implement regex matching in migrate.c
1013 kes Fix bug #537 to allow arbitrary time to mount a volume for
1014 restore, if polling is turned on.
1015 kes If dir_user or dir-group is specified in ./configure apply it to
1016 the working-dir. Fixes bug #533.
1017 kes If rescheduling a job cancel the previous incarnation with the SD.
1018 Fixes bugs #566 and 557.
1019 kes Fix bug #567 do_message() definition type conflict.
1022 kes Add more jcr methods and make mutex and use_count private.
1023 kes Create lock/unlock methods for jcr.
1024 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1025 records to get to seek position.
1026 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1027 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1028 terminates correctly by doing pthread_kill(). Do not destroy
1029 SD cond wait variable between executions of the job. Use local
1030 mutex for cond variable to avoid blocking jcr chain. Fix poor
1031 use of jcr use count in jobq.c for restarted jobs.
1032 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1033 lib/jcr.c -kes prevents locking the jcr chaing.
1034 kes Apply patch from bug #564, which corrects listing volumes with
1035 multiple autochangers. Apply same fix to next volume list.
1036 kes Fix bug #562 where restore bootstrap file is not unique.
1037 kes More details in implementing David's migration syntax proposal.
1038 kes Save and restore dcr when swapping drives so that if we have
1039 a write dcr it is not lost.
1040 kes Use new routine lock_reservations() to lock the reservations
1041 system, and call it while looking for a volume in askdir.c.
1042 This could possibly fix bug #543.
1043 kes Stop SD command loop if job is canceled.
1046 kes Remove old code from findlib/create_file.c
1047 kes Rename mac.c migrate.c
1048 kes Add user friendly display of VolBytes in job report.
1049 kes Rename target... to previous... to make it a bit easier to
1051 kes Add selection type and selection pattern to Migration (idea
1052 given by David Boyes).
1055 kes The po files should now be current.
1056 kes Fix new sql_use_result() code to properly release the
1057 buffers in all cases.
1058 kes Use the keyword ujobid to mean the unique job id; job or jobname
1059 to mean the Job name given on the Name directive, and jobid to
1060 be the numeric (non-unique) job id.
1061 kes Allow listing by any of the above.
1062 kes Add the user friendly job report code for reporting job elapsed time
1063 and rates with suffexes from John Kodis <kodis at comcast.net>.
1064 kes Add Priority and JobLevel as Python settable items.
1065 kes Use TEMPORARY table creation where the table is created by
1067 kes Add new code submitted by Eric for waiting on specific jobid.
1068 kes Add ACL checking for the dot commands.
1069 kes Fix restore of writable FIFOs.
1070 kes Fix a bug in bpipe where the string was freed too early.
1072 kes Modify the Python class examples to inherit object -kes new way
1073 of defining classes. Patch from Felix Schwarz.
1074 kes Implement jobuid to replace old usage of job in keywords as
1075 suggested by Eric Bollengier.
1076 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1077 wait (wait for all jobs to stop)
1079 wait jobuid=unique id
1081 kes Implement write variables for Python to set Priority (anytime), and
1082 Job Level, only during JobInit event.
1084 kes Fix the block listing bug pointed out by Arno.
1085 kes Update the po files at Eric's request.
1087 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1088 accept time qualifiers.
1089 kes Make catalog respect ACL.
1090 kes Add recycle count to Media record.
1092 Changes to 1.39.6-beta1 24Feb04
1094 kes Add Rudolf Cejka's new rc-chio-changer.
1095 kes Implement pulling Volume from Scratch Pool if the
1096 Volume is in the autochanger.
1097 kes Implement additional command arguments for update Volume.
1101 kes Back port changes to 1.38.5
1102 kes Fix recycle SQL for StorageId.
1103 kes Fix misplaced quote in mtx-changer script.
1105 kes Note. Your database must be updated, or you must create
1106 a new database. I have not yet incremented the database level.
1107 kes Add Location table.
1108 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1110 kes Implement create/get mac record in database for adding extended
1111 Migration data to the job record.
1112 kes Add new MAC table to update/make database scripts.
1113 kes Return Storage name used when getting VolumeNames for a job.
1114 kes Change bsr file keyword Storage to Device, which is more accurate.
1115 kes Ensure that Mac records are pruned/purged.
1116 kes Tweak SD tools to deal with changing media type.
1117 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1118 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1119 that the subroutine can switch devices, and hence dcrs.
1120 kes Modify the multiple MediaType read code to re-use the same
1121 dcr when switching devices. This makes the code much more
1123 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1124 from a table for restore.
1125 kes Add Storage name to VolParams, but it really should be Device.
1127 kes Add disk-changer to scripts directory + configure/Makefile
1128 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1129 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1130 kes Implement new store_bool that stores in a bool.
1131 kes Add true/false to yes/no conf directives.
1132 kes Make first cut at changing appropriate store_yesno to store_bool.
1133 kes Complete implementation of Pool storage devices.
1134 kes Move starting clones to job.c
1135 kes Move create_restore_bootstrap_file() to job.c
1136 kes Make copy_storage() more general to be able to handle
1138 kes Cleanup a lot of migration code for manual running, including
1140 kes Move getting a scratch Volume into a subroutine.
1141 kes Make all places a Volume that is added to a pool to
1143 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1144 kes Fix segfault in restore command when no value specified.
1145 kes Start adding code to handle multiple MediaTypes in restore.
1146 kes Eliminate race condition in getting Volume name for
1147 two drive autochanger.
1148 kes More debug code in autochanger.
1149 kes Add storage keyword to bootstrap file, add parsing.
1150 kes Move slot in bsr file into Volume record as there will be
1151 a different slot for each Volume.
1152 kes Create reserve.h
1154 kes Implement Pool storage overrides.
1156 kes Implement first cut of Migration.
1157 kes Implement mysql_use_result() from patch by Karl Hakimian.
1158 This reduces significantly the memory consumption during
1159 the restore tree building, and hence runs faster too.
1160 kes Implement StorageId patch supplied by user (reggie) in bug
1161 #536. This should permit Bacula to work correctly with two
1163 kes Implement Job listing variations suggested by a user.
1164 kes Move updating bootstrap code in backup.c to subroutine
1165 update_bootstrap_file().
1166 kes Add new job status elapsed time and bytes written user
1167 friendly job report output patch sent by John Kodis
1168 <kodis at comcast.ne>.
1169 kes Implement a storage list in Pools.
1170 kes Separate out setup_job() code from run_job().
1171 kes Get migration working -kes lots of changes in mac.c in both
1173 kes Apply patch from user (Eric Bollengier I think) that fixes a
1174 DIR crash when no arguments are supplied to a dot command.
1175 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1176 kes Fix command arg name->volume in label command of gnome-console.
1177 kes Fix SD acquire.c to release correct DCR by explicitly testing
1178 on the dcr address rather than trying to devine if it is a read
1179 or write dcr. This failed in error conditions when the device was
1183 kes Apply user supplied patch for more readable rate output
1185 kes Continue implementing migration.
1186 kes Implement support for removable filesystems in SD.
1187 kes Ensure that btraceback scripts can be read by anyone.
1188 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1189 kes Correct bug where canceling restore before the FD contacts
1190 the SD causes the drive to be left in read mode.
1191 kes Move ofline_or_rewind into DEVICE::close().
1192 kes Eliminate close_device.
1193 kes Convert several dev subroutines to methods (e.g. bsf,
1195 kes Eliminate force_close_device().
1196 kes Implement Device Type directive in Device resource that
1197 can have values File, Tape, Fifo, DVD, or Prog.
1198 kes Add has_cap() method to Device.
1201 kes Add patch from bug #527 to allow RedHat user to specify
1202 options/user/group for starting each daemon in
1203 /etc/sysconf/bacula.
1205 kes Add two new queries to query.sql provided by Arno. One
1206 list volumes known to the Storage device, and the other
1207 lists volumes possibly needing replacement (error, ...).
1209 kes Add periodic (every 24 hours) garbage collection of memory
1210 pool by releasing free buffers.
1212 kes Correct bug counting sized (for display only) in smartall.c
1213 kes Print FD mempool stats if debug > 0 rather than 5.
1215 kes Make db_lock() mutex error fail the job rather than abort
1216 Bacula. Canceling the job caused the mutex to fail.
1217 kes Correct bug in alist.c that re-allocated the list if the
1218 number of items goes to zero.
1219 kes Move the reservation system thread locking to the top level
1220 so that one job at a time tries all possible drives before
1222 kes Implement a reservation 'fail' message queue that is built
1223 and destroyed on each pass through the reservation system.
1224 These messages are displayed in a 'Jobs waiting to reserve
1225 a drive' list during a 'status storage='. Note, multiple
1226 messages will generally print for each JobId because they
1227 represent the different problems with either the same drive
1228 or different drives. If this output proves too confusing
1229 of voluminous, I will display it only when debug level 1
1230 or greater is enabled in the SD.
1232 kes Add enable/disable job=<job-name>. This command prevents
1233 the specified job from being scheduled. Even when disabled,
1234 the job can be manually started from the console.
1235 kes During 'update slots' clear all InChanger flags where the
1236 StorageId is zero (old Media records).
1238 Beta release 1.38.4:
1240 kes Fix autochanger code to strip leading spaces from returned
1241 slots number. Remove bc from chio-changer.
1242 kes Back port a bit of 1.39 crypto code to reduce diffs.
1243 kes Fix first call to autochanger that missed close()ing the
1244 drive. Put close() just before each run_program(). Fixes
1247 kes Add PoolId to Job record when updating it at job start time.
1249 kes Pull in more code from 1.39 so that there are fewer file
1250 differences (the new ua_dotcmds.c, base64.h, crypto.h
1251 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1252 util.c. Aside from ua_dotcmds.c these are mostly crypto
1254 kes Implement new method of walking the jcr chain. The
1255 incr/dec of the use_count is done within the walking
1256 routines. This should prevent a jcr from being freed
1257 from under the walk routines.
1262 kes Start implementing Verify list output.
1263 kes Move the suitable_drive flag to a better place to prevent
1264 premature termination of the reservation if all drives
1265 are busy -kes should fix Arno's diff/inc pool failures.
1267 kes Add mutex to single thread VSS code in Win32.
1269 kes Simplify code in askdir.c that waits for creating an appendable
1270 volume so that it can handle multiple returns from the wait
1272 kes Modify the wait code to permit multiple returns.
1273 kes Return a zero when 'autochanger drives' is called and
1274 it is not an autochanger.
1275 kes Make rewind_dev() a method taking a DCR as an argument.
1276 This permits closing and reopening the drive if the
1277 rewind fails as happens if the drive was loaded while the
1278 file descriptor was open. This refreshes the file descriptor.
1279 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1280 if the device is open or not. This should eliminate
1282 kes Return error if reserve cannot find at least one suitable device.
1283 kes Make wait_for_sysop() return correct state information.
1284 kes Fix Win32 state file problem. write was not using compat
1285 code. This should fix bug #500.
1287 kes Modify gui on command to set only GUI mode and not batch.
1288 kes Modify .messages command to always print messages regardless
1290 kes If GUI mode is on, suppress automatic printing of
1292 kes Delete old bnet packet code.
1293 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1294 wx-console. -kes not implemented because bconsole must be updated.
1295 kes Modify restore command in wx-console to set gui on and to use
1296 only .messages instead of messages. Hopefully this fixes bug
1298 kes Fix seg fault in exit of acquire when canceling a job --
1299 reported by Wolfgang Denk
1300 kes Pull in latest reservation system changes from 1.38
1301 kes Make .messages command always print messages regardless
1302 of the automessages flag.
1304 kes Fix seg fault if user labels a drive directory bug #513
1305 kes Remove quotes around Version as it breaks things.
1307 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1308 kes Apply sparse code fix for raw drives and fifos. Bug 506
1309 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1311 kes Correct reservation system to do a last ditch try
1312 for any mounted volume, then anyone anywhere.
1313 kes Add quotes around table Version because of
1314 error in MySQL 4.1.15 -kes bug report submitted.
1315 kes Correct some minor problems with btape in the fill
1317 kes Updates to ssh-tunnel from Joshua Kugler.
1318 kes Added a report.pl program from Jonas Bjorklund.
1319 kes Simplify the O_NONBLOCK open() code for tape drives,
1320 and always open nonblocking.
1321 kes Do not wait for open() if EIO returned (shouldn't happen).
1322 kes Eliminate 3 argument to tape open().
1323 kes Correct the slot # edited in the 3995 Bad autochanger unload
1325 kes With -S on bscan (show progress) do not divide by zero.
1327 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1328 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1329 kes Remove unused code in wait_for_device.
1330 kes Make wait_for_device() always return after 60 seconds of wait.
1334 kes Add stubs for non-crypto build.
1336 kes Use localhost if no network configured
1338 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1339 kes Remove debug print.
1340 kes Add bail_out in error during state file reading.
1342 kes Merge changes made to 1.38.3 into HEAD
1343 kes Add stubs for pygtk-console code
1344 kes Create Makefile.in for pygtk-console code
1346 kes Merge updates into 1.38 branch
1347 kes Update specs to include mysql4 define.
1348 kes Fix when attributes are sent, must be after binit().
1349 kes Stop read_record() if status not ok in second loop.
1350 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1351 and partial records in read_record(). This allows bscan
1352 to get FileIndex at EOT correct.
1353 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1355 kes Fix Win32 built to work with new crypto code.
1356 kes Apply patch supplied by user (slightly modified) to fix
1357 correct detection of holes in block devices and FIFOs.
1359 kes Apply patch supplied by user (slightly modified)
1360 to fix SD hang with multiple pools and bad client
1361 IP. Fixes bug # 508.
1363 kes Add nagios plugin to the examples directory. Submitted by
1365 kes Remove warning message about multiple saves of hardlinked files
1366 from find_one.c as it can generate too many warning messages.
1367 kes Modify most restore error messages to be queued so that they
1368 appear at the end of the job rather than mixted with the restore
1369 listing where they could be 'lost'.
1371 kes Reset timeout values before select() per patch from
1372 Frank Sweetser for problems with non-blocking sockets.
1373 kes Unlink the state file if either reading or writing it gets
1374 errors. Hopefully this will fix Win32 exit problems.
1375 kes Add sanity check in append.c to ensure that dcr is not NULL.
1376 This can happen if multiple drive autochanger SCSI control
1377 channel and drive indicies do not correspond.
1379 kes Get next volume from Scratch pool before creating a volume.
1380 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1381 kes Remove argument from create_bacula_database for SQLite as it
1383 kes Add back index code so that two drive autochangers can get
1385 kes Change a bunch of debug levels to aid debugging autochangers.
1386 kes Fix reservation so that mutexes are properly applied.
1387 kes Rework reservation algorithm so that two drives can be used
1390 kes Landon merged his data encription changes into the HEAD
1391 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1392 If this patch is applied, the number of days can be specified with
1393 'list nextvol days=xx'
1395 'status dir days=xx'
1396 My use case is to be able to preview the next scheduled job (and the
1397 next tape to be used) on fridays if there are no scheduled jobs during
1401 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1402 kes Fix malformatted bnet error message that caused seg fault
1404 kes Applied user patch to improve README.vc8 in src/win32.
1406 kes Add Migrate, Copy, Archive Job types (some where there)
1407 kes Correct some more editing of JobId's (for 64 bit compatibility).
1408 kes Ensure that StorageId is stored in Media record when ever possible.
1409 kes Add Migration Job to Job.
1410 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1411 Next Pool to Pool resource.
1412 kes Add more code to mac.c (migration archive copy).
1413 kes Change Start Storage daemon job to require read and write storage
1415 kes Pass read storage data to SD as well as write storage data.
1416 kes Remove old code from winservice.cpp
1417 kes Break on error in scan.
1418 kes Fix typo in signal.c
1419 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1420 kes Cleanup how find_device() works.
1421 kes Add read output to Status in SD.
1424 kes Add red-black btree routines
1426 kes Remove abs() in bfile.c so that it compiles on Solaris.
1429 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1430 kes Fix bnet-server bug found on OpenBSD. Bug #486
1431 kes Fix cancel failure bug. Bug #481
1432 kes Fix failure when Pool name has spaces. Bug #487
1433 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1434 kes Fix a couple of free()s in src/filed/acl.c
1435 kes Fix memory overrun in bfile.c in building OS X resource
1436 fork filename. Bug #489
1437 kes Add Pool name to SD status output.
1439 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1440 kes Make sure to set storage before trying to set drive.
1441 kes Add bacula_mail_summary.sh to examples directory. It makes
1442 a single email summary of any number of jobs. Submitted
1444 kes Make sure when we do a mount to unblock the device even
1445 if the drive could not be opened.
1447 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1448 and correct a few minor problems to make it build on Linux.
1450 kes Remove delete of CVS from all Makefiles
1451 kes Fix seg fault when clicking on Add button in wx-console
1452 restore panel. Bug #470.
1453 kes Fix copyright date and URL typo -kes bug #468.
1454 kes Change autostart install for FreeBSD to look for rc.conf
1455 rather than rc.local as suggested fix for bug #466.
1456 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1457 grant on status. Bug #465
1458 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1459 update script. Bug #464
1460 kes Tweak #ifdefing a bit in new Win32 stream code.
1461 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1462 kes Add documentation of performance #defines
projects / bacula / bacula / blob