1 Technical notes on version 1.39
5 kes Cleanup some of the error termination code in migration.
6 kes Separate read/write source strings to keep track of where
7 storage devices are used in a job.
8 kes Implement a new method of keeping track of which storage
9 device is used in a Job. USTORE keeps both a pointer to the
10 resource and to the source string.
11 kes Modify all code to use new storage set subroutines in job.c
12 kes Modify migrate.c so that the definitive selection of the storage
13 resource is done in the do_migration_init() routine prior to
14 the job going into the job queue. This permits accurate
15 deadlock detection (same read and write storage resource).
16 kes Remove bfill from btape (I think it was a left over stub).
18 kes Make sure that the storage for a job is pulled first from
19 the Pool and if not from the Job.
20 kes Ensure that either the Pool or the Job specifies a Storage
23 kes Start applying new FSFE copyright.
25 kes Add additional error messages in acquiring a drive for read.
26 kes Make WritePartAfterJob the default so that the last DVD part
27 always gets written to the DVD by default.
28 kes Add additional error messages in migration.
29 kes Suppress redundant error messages in migration (possibly more to do).
30 kes Apply Martin's fix (updated to 1.39) that takes into account
31 run storage overrides in the Director status display.
32 kes Implement, but turn off the submitted code that sets the EOT
33 model on FreeBSD machines. Turning on this code is too risky at
34 this point in the development.
36 kes Implement unique dbid routine for migration to prevent the same
37 JobId from being migrated twice. This should fix bug #709.
39 kes Apply Jaime Ventura's 'mail on success' patch.
40 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
41 if memory usage gets too big.
42 kes Tweak migration to ensure that read/write devices are different.
44 kes Create an AUTHORS file to list Bacula contributors.
45 kes Add Richard Stallman's four GPL freedoms to LICENSE
46 kes Require the conf file to have a valid NextPool for writing the
49 ebl Enable RecycleCount in catalog.
50 ebl Fix "echo python | bconsole" segfault
52 kes Implement code to pass the MediaId to the SD. The SD then uses
53 this MediaId when creating JobMedia records. This fixes a bug
54 with Migration where the MediaId got set to the second Volume
55 read rather than the write Volume. Possibly (unlikely) fixes
57 kes Remove NextPool from Job resource.
58 kes Edit a few numbers in the restore dialog with commas.
59 kes Note, the DIR<->SD protocol has changed.
61 kes Replace () by {} in configure.in for proper HP configuration.
62 kes Shorten some lines over 80 characters in filed/backup.c
63 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
65 Version 1.39.28 released:
67 kes Change error message 'illegal' to 'invalid' -- bug #707
68 kes Add rather primitive device resource deadlock detection in
69 the job queue handler. It detects the same read and write device
70 for migration and cancels the job.
71 kes Start adding a unique_dbid_hander() routine in migration to avoid
72 duplicate mediaids and duplicate jobids.
73 kes Add patch from bug #708 to permit relative paths such as ../xxx
74 in the restore tree routine.
75 kes Add Eric Bollengier's patch to reduce locking time in the SD after
76 despooling, and thus many jobs finish faster.
77 kes Correct locking order of reservations lock and device mutex in
78 reserve.c -- this should correct Arno's deadlock that occurred
79 when doing mount/unmount at the same time a job is reserving a
82 rbn Fixed problems with encryption when combined with compression
83 or sparse files. Unfortunately this means that all previous
84 encrypted backups can't be restored.
85 rbn Fixed problem in bfgets with Windows and Mac end of lines.
86 rbn Fixed bug in Windows version of close_bpipe() that cause programs
87 like bsmtp() to hang waiting for the pipe to be closed. Fixed
88 binary file type problems in open_bpipe().
89 rbn Fixed a number of bugs in the mysql DB scripts.
91 ebl Fix broken runscript on director. (RunBefore, RunAfter)
92 ebl Use M_ERROR instead of M_FATAL in runscript.c
94 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
95 rbn Ignore UTF-8 marker at the start of .conf files.
96 rbn Add stab2cv to 3rd party dependencies. This is a utility I
97 wrote that is licensed under the GPL and available on SourceForge.
98 It converts the stab debugging info generated by gcc into Codeview
99 format. Currently it just translates function names to global
100 symbols. This is sufficient to get reasonable stack traces from
101 Dr Watson and to look at minidumps.
102 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
103 rbn Enable Windows XP look and feel for the tray icons and wx-console.
104 rbn Add Windows specific FileSet example to bacula-dir.conf.
105 rbn Reorganize Start menu so that documentation and configuration are
108 rbn Change daemons and utilities so that if -c is omitted from the
109 command line AND there is no configuration file in the current
110 directory then the 'standard' configuration file (eg
111 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
112 doesn't contain any path separators AND there is no configuration
113 file by that name in the current directory then the 'standard'
114 configuration file directory will be searched for a file by that
116 rbn Fixed restore on Windows so that backslashes as path separators works.
117 rbn Add missing query.sql file to Windows installer.
118 rbn Fixed Windows versions of catalog backup scripts.
120 kes Fix optional files in Makefile.in of src/filed that caused
121 a syntax error when using no optional files.
123 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
124 messages; there is no reason to attempt to load a private key.
125 from master key files.
127 Version 1.39.26 released:
129 kes Apply the three patches from Richard Mortimer.
130 bacula-reposition.patch, bacula-tape-reopen.patch, and
131 bacula-eod.patch. This corrects tape positioning on older devices,
132 and also a problem with btape.
133 kes Apply fix from bug report #696 where writing to a FIFO does not
134 work due to a dumb typo.
135 kes Unlock the tape door before the file descriptor is released. This
136 should fix lots of somewhat subtle failures when using an autochanger.
138 kes Correct mtx-changer bug that I introduced in a recent commit, and
139 pointed out by Robert Nelson -- thanks.
140 rbn Fix Windows' daemons so that messages print to stdout if not
141 running as a service.
142 rbn Add daemon name to trace file name (eg bacula-dir.trace).
143 rbn Fix environment variable expansion in directory names on Windows.
144 rbn Fix autochanger support in fill command.
145 rbn Update SQL scripts to match Unix versions.
146 rbn Fix daemon usage displays.
147 rbn Cleanup bacula-dir.conf template.
148 rbn Install openssl.cnf so that the openssl.exe installed in the
149 Bacula\bin directory can be used to generate keys and
150 certificates for TLS and encryption.
151 rbn Fix cleanup of spool files on Windows.
152 rbn Remove /silent option from daemons on Windows. The new default
153 is the same as the old /silent. To enable the message boxes that
154 previously were suppressed by /silent you must add /debug instead.
155 NOTE: As a result of this change, the first time you upgrade from
156 a previous version of 1.39.x you will receive the message
157 boxes when the remove of the old services succeeds. This
158 is the same behaviour as when migrating from a version prior
160 However, going forward, these message boxes will not appear on
161 upgrades or new installs.
162 rbn Add new /debug option. This option enables the message boxes that
163 previously were suppressed by the /silent option. In addition the
164 daemons running as services will open a console window if this
166 rbn Fix bug with service not being removed on migrated installs. This
167 should correct those cases where the file daemon install was failing
168 when upgrading from versions prior to 1.39.x.
170 kes Turn on heap reporting in Dir with zero debug level.
171 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
172 send the same message to stdout.
174 kes Begin work on new GUI 'console'.
175 kes Make configure look in non-standard MySQL library directory
177 kes Make mtx-changer automatically configure the autochanger wait
178 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
180 kes Correct drop_sqlite_tables.in script to not delete the database.
181 kes When writing to a log file, close and reopen the file descriptor
182 if there is an error writing the file.
183 kes Modify the autochanger loaded?, load, and unload commands to print
184 the full text of any mtx output if there is an error. Helps to
185 ease diagnosis of autochanger problems.
186 kes Correct a few Win32 errno returns in the VSS code so that hopefully
187 a resonable Win32 error message will be printed.
188 kes Convert a few strcat()... to bstrncat() in the Win32 code.
190 rbn Added Windows version of bsmtp.
191 rbn Fixed path search for Windows so that Bacula\bin is automatically
192 searched for programs and scripts.
193 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
196 Version 1.39.24 released:
198 kes Apply dvd find volume patch from Richard Mortimer.
199 kes Eliminate the dvd specific mount routines using only the
201 kes Make update_free_space a method of DEVICE and rename
204 kes Require a messages command acl to be able to receive messages
206 kes Add console, system, and scan job types in util.c.
208 kes Print the Volume purged message only for real jobs to keep
209 from cluttering up the daemon messages.
210 kes Lock the tape drive door while Bacula is using the device.
211 kes Add back the 'No Jobs running' message to FD and SD status because
212 my regression script depends on it, and I'm too lazy to change the
214 kes Start using structure assignments (not too happy about it ...).
215 kes Fix a bug in the tools Makefile that broke on Solaris.
216 kes Unload any autochanger drive during a 'release' command.
218 kes Enhance error message when restoring without bootstrap file.
219 kes Check restored size only for regular files.
220 kes Store Python job level in job record in Dir.
221 kes Add back code to open tape device nonblocking, but if rewind fails
222 release file descriptor.
223 kes Modify acquire.c to first try autoloading the device. Also, ask operator
224 to mount tape if drive cannot be opened.
225 rbn Made Windows service tray status windows resizable.
226 rbn Fixed horizontal scrolling of text in status window.
227 rbn Preserve horizontal and vertical scroll position while
228 updating. This prevents the display being reset to the
229 top line every 5 seconds.
230 rbn Fix Windows cross-compile compatibilty problems with
231 *nix variants such as OS X without the zic command.
232 rbn Eliminate dependency on man2html.
234 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
236 kes Fix a compiler warning in compat.cpp
237 kes Change strcpy to bstrncpy in compat.cpp
238 kes Remove some broken code in bdb_list.c
239 kes Fix, hopefully the last, ACL problem in the restore command.
240 kes Update the README.mingw32
241 kes Add new version of upgrade-win32-client.txt to examples directory.
242 Submitted by Michel Meyers.
243 kes Print an INFO message in the job report when a Volume is marked Purged.
244 rbn Fixed handling of external program and script execution
245 so that the format of the command line is more flexible.
246 Now executable path names containing spaces are translated
247 to the equivalent short name automatically. The result is
248 passed to cmd.exe with the quotes removed.
250 kes Apply the recycle patch from Richard Mortimer.
251 kes Convert a few if statements in dev.c to switch statements.
252 kes Start using print_errmsg instead of bstrerror().
253 kes Print a job message in SD when a job is marked to be canceled.
255 kes All code added back. Fixed block.c read/write to loop only 3
256 times. This apparently keeps the OS from crashing (at least
258 kes The kernel bug still persists. Backup something then immediately
259 do a bscan on the same tape, and the kernel will crash.
260 kes Simplifed tape open(). It no longer uses nonblocking mode, which
261 means that opening with no tape loaded will probably take at least
262 6 minutes before an error is reported.
263 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
264 when doing set_os_device_parameters.
265 kes Report open error in mount.c
266 kes Remove all .exe files from the installer directory on make clean.
268 kes Start adding back removed code.
269 kes Back out a number of changes because backups to tape crash my
271 kes Remove the inetd code from the File daemon.
273 kes Add -c option to pg_dump so that it initializes tables when
275 kes Fix FirstWritten time on Volume to be obtained from SD so that
276 it is the actual time the volume was first written.
277 kes Minor Makefile changes.
278 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
279 ebl Add yes keyword to prune/purge command
281 kes Correct a test in block.c that prevented restore of a DVD from
282 looking at the last part in the spool directory.
283 kes Make some error messages clearer mostly by using the word DVD
284 in the message. Improve infor message in read_record for DVDs.
285 kes Remove DVD kludges in dircmd.c label/relabel.
286 kes Move the dvd relabel code from dircmd.c into
287 write_new_volume_label_to_dvd() adding a relabel argument.
288 kes Rewrite the truncate_dvd() code to be much simpler and
289 more logical. First blow away any spool part, then create a
290 new empty part and write to the DVD.
291 kes Rewrite the can_write_on_non_blank_dvd() code making it
292 only ensure that no valid data is on the DVD -- i.e. it
295 kes Minor Makefile fixes.
296 kes Put attach_dcr_to_dev in a subroutine.
297 kes Make attaching/detaching to/from a device use a flag and
298 only detach if actually attached.
299 kes Add dvd-simulator.in to scripts directory and add to configure.
300 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
301 This could be a cause of a number of drive reservation problems.
302 Note, this code is now in attach_dcr_to_dev().
303 kes Suppress doing Volume updates if it is a system job. This should
304 prevent the DVD label blocking.
305 kes Clear the freespace ok flag in a couple of strategic places.
307 kes Put removing zero sized spool part file in subroutine and
308 call from release_device().
309 kes Add Richard's patch for relabel to dircmd.c, but save and restore
311 kes Rework a lot of subroutines in dev.c to take dcr as an
312 argument. This is done to eliminate the usage of attached_dcrs
314 kes Change truncated_dvd to blank_dvd, which seems more suitable.
315 kes Apply most of Richard Mortimer's truncate patch.
316 kes Create lseek() method for DEVICE that takes dcr as an
317 argument. This is to eliminate the use of attached_dcrs in
318 lseek(). The calls to lseek_dev() must still be changed.
320 kes Apply Richard Mortimer's patches for printing an error
321 message in btape when a DVD is used, and to initialize traceback.
322 kes Added error message to btape when trying to access a file.
323 kes Move prototype of update_slots() to protos.h.
325 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
326 and FDJobStatus to the Director Python variables.
327 kes Make sure valid argument passed to str_to_utime() where Arno
329 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
330 I.e. part of two different patches.
332 kes Modify disk changer to simulate some of the error conditions
334 kes Make sure the close() call in the SD tools is just before the
336 kes Implement dir_get_volume_info() in bls using the patch from
337 Richard Mortimer but call find_num_dvd_parts().
338 kes Implement find_num_dvd_parts() that mounts and scans a DVD
339 and counts the parts.
340 kes Move the omode code in open_dvd() up so that the cannot
341 write on blank disk can check can be bypassed for read mode.
344 kes Disable normal data spooling for DVD writing which uses
345 a different spooling mechanism.
346 kes Apply patch from Richard Mortimer to ensure that the number
347 of DVD parts is correctly updated.
348 rbn Save installer details log in the Bacula directory as
350 rbn Add installer generation of client and storage templates
351 suitable for @inclusion on the director.
352 rbn Mark previously installed Win32 components read-only since
353 deselection doesn't do anything.
355 Version 1.39.22 beta released:
357 kes Fix logic error in handling error return from mtx-changer
359 kes Make status from SD aware of -1 (unknown) Slot status.
360 kes At Eric's suggestion make both the 'slots' and 'drive' commands
361 to the Storage daemon work even if the drive is busy.
362 kes Make two separate Win32 menu links for starting bconsole and
363 wx-console in winbacula.nsi
364 kes Apply DVD part_spooled patch from Richard Mortimer
365 richm@oldelvet.org.uk
366 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
367 rbn Fixed problems migrating settings from previous releases in
368 Win32 installer. Add Readme.txt with an option to show it on
369 the installer Finish page.
371 kes Use get_catalog_resource() to open catalog database
372 to ensure that ACLs are respected and that user is
373 correctly prompted for database.
374 kes Integrate multiple console/director patch from
375 Carsten Paeth calle@calle.in-berlin.de
376 ebl Add character substitution in Job/JobDefs WriteBootStrap.
377 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
378 kes Apply patch supplied in bug #656 to pass priority field
379 in the run dialog to the Director in gnome console
380 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
381 this will fix bug #627 where Bacula eventually gets
382 confused about what Volume it wants.
383 kes Add a new close_part() class in the SD to save the device
384 state around open/close_part/open for DVD writing. This
385 should fix the num_dvd_parts getting zeroed as reported by
387 kes Apply patch from Richard Mortimer that correct edit code
388 for debug output of st_size.
389 ebl Add support of encrypted data stream to bscan.
390 display data_len instead of data content (may be binary)
392 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
393 bcopy. Fixes bug #669 reported by Eric.
394 kes Fix incorrect number of arguments in SQL statement in
395 sql_get.c as reported by Eric.
397 kes Update examples directory.
398 kes Remove unused variable in winservice.cpp
399 kes Make Win32 make command build installer.
400 rbn Add new Install Type page, used to select between Automatic
401 and Custom installs. Automatic installs only prompt for
402 configuration items that can't be reasonably defaulted.
403 rbn Added Bacula logo to page headers.
404 rbn Added Upgrade support
405 - Configuration and component selection are migrated from
407 - Configuration of upgraded components is preserved and
409 - Configuration of new components is handled according to
410 the Automatic / Custom selection.
411 - Component selection is defaulted to previously selected
413 rbn Installation of Server components is disabled on
414 Windows 95, 98 and ME.
415 rbn Added URLs for support, info and upgrades to Bacula entry
416 in Add/Remove Programs.
417 rbn Added Version info to Bacula entry in Add/Remove Programs.
419 kes Correct dvd code that breaks tape labeling.
420 kes Implement Enabled on update slots.
422 kes When doing a label, pass the VolBytes back to the Director,
423 which puts it in the catalog.
424 kes Print an error message if the user attempts to prune an
426 kes Need to start using %ld when sscanfing 32 bit values.
428 kes Correct the counting of VolCatBytes for DVDs.
429 kes Add code to mount.c to require that VolCatBytes corresponds to
430 what is actually found when doing an append.
431 kes Update freespace only after writing on the DVD.
432 kes Remove code that blows away the current part in the spool file.
434 kes Apply new dvd-handler patch from Richard Mortimer.
435 kes Tweak so that debug level 20 shows only DVD commands.
436 kes Correct spooled_part flag in dev.c close() so that it is cleared
437 when the spool file is deleted or does not exist.
438 kes Print part number in read_records when eof hit (restore).
439 rbn Installer default changed to start services on new install.
441 kes Make find with no args in tree restore return error rather than
442 stopping the selection. Fixes bug #665
443 kes Rework DVD writing to ensure that the last part is written
444 on open_next_part when dealing with a spool file.
445 kes Correct the lseek_dev() routine to handle end point correctly
446 (bug introduced by me).
447 kes Allow part number to exceed num_dvd_parts in lseek_dev().
448 rbn Change make_session_key on Windows to use WIN32 APIs to produce
450 rbn Add new tool scsilist.exe which displays the changer, tape and
451 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
452 to add them to bacula-sd.conf.
454 kes Apply dvd-handler patch from Richard Mortimer.
455 kes Apply dvd error check patch from Richard Mortimer.
456 kes Apply bpipe race patch from Richard Mortimer.
457 kes Rework how DVD labels are handled and set append only
458 when part > num_dvd_parts.
460 kes Rework many features of DVD writing and reading. Added many error
461 messages. Most importantly changed part to represent the current
462 part number base zero. This makes current DVD writing incompatible
463 with previous version.
465 kes Add host:port to connect failure messages to FD and SD from Dir.
466 kes Add WhereACL to console ACL list. If nothing is specified, only
467 the default is permitted for restore. Otherwise, *all* allows any
468 path, or you can specify permitted paths. This should allow control
469 over where users can restore files. This is untested.
470 kes Modified message to add a ? (as in loaded?) when querying the autochanger
471 for what Slot is loaded.
472 kes Fixed the use of Slot, so that is more correctly maintained, thus
473 eliminating unneeded duplicate calls to determine what Slot is loaded.
475 kes Install man pages with 'make install'
476 kes wx-console crashes because of differences between Bacula and wxWidgets
477 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
479 kes correct improper indenting in wx-console/console_conf.c
480 kes update wx-console header copyrights
481 kes Fix bug #658 where wx-console mangles file/directory names containing
484 kes Add Media.Enabled flag to client backups for dotcmds.c
485 kes Enforce Media.Enabled=1 for a current restore to work.
486 kes Require restore case 3 to have sqlquery permission to work.
487 kes Remove obsolete del_MAC sql command.
488 kes Ensure that bscan creates Volumes with Enabled=1.
490 Version 1.39.20 beta released:
492 kes Correct missing Client table reference in SQL pointed out by
495 kes Fix Win32 build (new entrypoint, start baculafd).
497 kes Add -n option to bconsole to turn off conio.
498 kes Print JobIds to be migrated in Job Report.
499 kes Add additional user supplied notes to the messages part of
500 bacula-dir.conf concerning multiple email addresses.
501 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
502 kes Add more recent Feature requests to Projects file.
504 kes Apply Maritn's fix to src/win32/Makefile.
505 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
506 kes Implement pruning for Migration and migrated jobs.
507 kes Implement PoolOccupancy migration.
508 kes Implement PoolTime migration.
510 kes If doing a mount, look for a slot, and if specified pass it to
511 the SD so that it can load the autochanger.
512 kes Return DVD=1 flag if a label command is done to a DVD. This
513 permits setting VolParts to 1.
514 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
515 rework ua_label code based on DVD media type to use DVD flag returned.
517 kes Eliminate some compile warnings in dird_conf.c
518 kes Format the bytes field in the terminated jobs part of the status
519 command for the three daemons with suffixes to reduce print size
520 of backup bytes. Suggested by a user.
521 kes When not descending into a directory, print the File= name that
522 triggered it -- makes why not descending a bit clearer.
523 kes Do not unload autochanger when doing a list command -- basic code
524 from Eric Bollengier.
526 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
527 to build-depkgs-mingw32. It now handles two options -h to display
528 help and -C to reextract the source and apply the patches. The -C
529 option is useful for updating the source after new patches are
531 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
532 This allows updating to new versions without having to modify the
533 script and makes it easier to figure out which packages and which
535 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
536 as build-depkgs-mingw32 except they are built using Microsoft Visual C
537 and placed in the depkgs-msvc directory. There is also an
538 External-msvc file to describe the packages.
540 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
542 kes Fix bug #462 incorrect error message printed when client script called
543 from File= was not found.
544 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
545 do a rewind on Solaris when no tape is in the drive (Solaris does not
546 have the detailed errno found on Linux). Added Solaris specific code.
547 Note, this may apply to other OSes as well.
549 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
550 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
551 fix bug 648 - update sqlite script patches, lock out gnome2console
552 builds for platforms with gtk+ < 2.4.
553 Updated build_rpm.sh - add remote source directory, add switch for
554 signing, refine file names.
555 Updated spec file again for Mandriva build as they have this curious
556 custom of silently converting all manpages to bzip2 format just before
557 the final packaging step.
559 rbn Fixed the Windows Makefiles so that they won't accidentally try and
560 pickup binaries for the Unix build. This allows both the Unix
561 build and the Windows build to be built in the same tree without
562 interfering with each other.
563 rbn Fixed error handling and cleaned up mtx-changer.cmd.
564 rbn Added the rest of the database scripts. These are installed but are
565 not yet edited for variable replacement.
566 rbn Broke out the cats functionality from bacula.dll and put into new
567 separate dlls for each database type. At installation time the
568 correct one is copied to bacula_cats.dll.
569 rbn Eliminate the need to install the mysql.dll on client only builds.
570 rbn Moved dird/sql_cmds.c into the cats directory so all the database
571 specific #ifdefs were in the cats directory.
572 rbn Added a new sql_cmds.h with all the declarations for the variables
573 exported from sql_cmds.c.
574 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
575 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
577 kes Correct improperly formatted list command output reported by Dan.
579 kes Correct despool time calculation.
581 kes Remove previous changes to compat.cpp as they create problems.
582 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
583 kes Attempt to fix problems with the msg_queue crashing on Solaris
584 when Bacula is terminating, but problems remain.
585 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
586 name editing problems with too many \\?\es.
587 kes Fix some Bacula source code style problems in compat.cpp.
588 kes Add debug code to compat.cpp and convert non-Bacula debug code
591 kes Change the name of the technical notes file from kes-1.39 to
592 technotes-1.39. Prefix my messages with 'kes '.
593 kes Allow dequeue_messages() to be called twice. Should fix bug
595 kes Add Job type to bscan Job information output.
597 kes Update copyright date in program files, and for the most part
599 kes Implement %q in bsnprintf.c apparently I forgot it.
601 kes Make disk-changer sed command compatible with FreeBSD.
602 kes Make a first cut at a ReleaseNotes and ChangeLog for a
604 kes Make make clean descend into the src/win32 directory.
605 kes Fix some #ifdefing so that Solaris and FreeBSD compile
606 sys/stat.h was turned off.
607 kes Use suffix editing for new transfer rate messages.
608 kes Attempt to come up with a workaround which seems to be an OS
609 bug where write() returns EBUSY. IMO this should not happen.
610 It triggered in truncatebug test. The workaround retries using
612 kes Eliminate a strerror() call in a class method that failed with
614 kes Use rm -rf rather than rmdir to delete the src/win32/release
615 directory during make clean.
617 kes Make bscan ignore ACL streams.
618 kes Update projects files with new Feature Requests.
619 kes Generate current English and French manuals and upload
621 kes Update the home page to include the new British/French flags to
622 switch between translations. Work done by Alexandre Baron.
623 kes Make disk-changer script print an error message if the changer
624 directory is not defined.
625 kes Create a generic DB routine for getting an int (32/64 bit) from
627 kes Add more migration code.
628 kes Add a few more files to .cvsignore here and there.
629 kes Minor fixes for SD write rate and despooling rate.
630 kes Turn off new test code in src/console.c
634 kes Incremented the version number to signify that all of Robert's code
635 for Win32 that was in the branch is now integrated into the HEAD,
636 and that Eric has submitted code that we hope will provide limited
637 backward compatibility with 1.38 file daemons (more testing to be
639 kes I rationalized a few of the names of the variables (mainly jcr names)
640 that are used during migration as keeping three different jcrs at the
641 same time clear in ones head is not easy.
645 eb Tweak new runscript feature to work with 1.38.x FDs.
646 eb Correct crypto.c to fix segfault when restoring an encrypted stream
647 on fd which don't use rsa keys.
648 eb Add yes/no English keywords on localized yes/no questions.
650 kes Several important commits from Robert Nelson for code cleanup and
652 kes Modify console.c so that when conio is enabled, it converts \n to
653 \n\r before outputting to the console. Hopefully this will fix
654 the problems with expect in Perl that Eric saw.
656 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
658 kes Add Comment field to llist of a volume.
659 kes Allow true/false in some yes/no questions.
660 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
661 kes Remove a few /n's when scanning commands from another daemon. This
662 permits adding additional fields later.
663 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
664 kes Update README.mingw
666 kes Tweak authentication to work with 1.38.x FDs.
667 kes Tweak catalog make scripts.
668 kes Fix catalog upgrade scripts so that they work.
669 kes Correct despooling debug code to eliminate race condition.
671 kes Add additional fields as specified by Arno to LocationLog.
672 kes Add comment field to the Media record.
673 kes Add Time field to the Log record.
674 kes Correct migration SQL (thanks to Bill Moran) so that it
675 runs with PostgreSQL also.
676 kes Add spooling/despooling info in status output of SD.
678 kes Spend a lot of time integrating mkcdrec with the rescue disk.
679 kes Add VOLMGMT message class for volume management messages (none yet).
680 kes Add CATALOG as a destination. It goes into the LOG table.
681 kes Implement the Log table in the DB.
682 kes Implement the Location Log table in the DB (for user use).
683 kes At Eric's request add a run_scripts() just after blast_data in
686 kes Add Enabled column to Location, correct some typos in DB schemas.
687 kes Correct bug I introduced into RunScripts enum.
688 kes Add log table to Catalog
689 kes Purge original job migrated if the migration terminates normally.
690 kes Cleanup purging of files/jobs so that it is done only in a
692 kes Add new VOLMGMT message class.
693 kes Add Catalog message destination (user conf code remains to be written).
695 kes Modify read_record and friends to properly deal with migration
697 kes Update debug code in read_record.
699 ======================= Warning ==========================
700 Separate read and write storage in Jobs in the Director. This
701 is a major rewrite of some of the low level code and hence has
702 a high probability of introducing bugs.
703 ==========================================================
705 kes Move the job init code up to *before* the job is put into
706 the job queue (resource allocation queue). This permits the
707 job to establish whether it will read or write or do both.
708 kes Add name() methods to all the resource classes.
709 kes Implement separate read and write storage resource
710 allocation/deallocation in jobq.c
712 ======================= Warning ==========================
713 Implemented new method of getting the default Storage from the Media
714 record rather than from the MediaType for restore. As a fall
715 back, if no Storage is defined, use the MediaType. This
716 eliminates most all prompts if there are multiple MediaTypes
717 used. This is an important and fundamental change.
718 ==========================================================
720 kes Add more detail (Storage, Device) to list of volumes printed
722 kes More code in migrate. In particular start multiple jobs if
724 kes Probably overkill, but ensure that the bsr is unique even within a
726 kes Rework bsys.c drop() so that it now should work as expected.
727 kes Update a bunch of old copyrights -kes particularly in .h files.
728 kes Remove src/lib/bshm.c/h
732 ======================= Warning ==========================
733 All hash codes in the database are now kept in world
734 compatible base64 format (no = filling). This means that
735 all FileSets will be updated and if you are running
736 verify jobs, you must do an InitCatalog.
737 Authentication uses the new algorithm, but should be
738 backward compatible with 1.38.x
739 ===========================================================
741 kes Modify the authentication routines so that the 1.39.15 Director
742 always runs with the compatible binary to base64 code (same as
743 the rest of the world). It will however detect if an SD or
744 FD is running the old code and if that is the case, will use
745 the old algorithm for authentication. However, all consoles must
746 use the compatible algorithm, and all data entered into the database
747 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
748 use the compatible algorithm.
749 kes Rename the cram_md5 routine names to be slightly more appropriate
750 to what they are doing (challenge and respond).
751 kes Robert committed his #ifdef and header cleanup.
753 kes Fix a compiler warning in files/backup.c
754 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
756 kes Robert committed his low impact changes.
757 kes I removed a size_t from the jcr.h definition.
758 kes Update the tape regression scripts (still to be tested).
759 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
760 kes Require done or quit to exit from in memory tree restore.
762 kes Write install/uninstall of new manpages. There are now a
763 pile of man pages. Some of which need a lot of work.
765 ======================= Warning ==========================
766 The --mandir ./configure option now points to the top level
767 man directory. The man files will be installed under
768 mandir/man8 and mandir/man1 as appropriate.
769 ==========================================================
771 kes Add complete text of GPL to LICENSE.
772 kes Implement job report that indicates where Storage and Pool
773 came from -kes with overrides and Pool storage and NextPool,
774 it is all very complicated.
775 kes Create a few common subroutines for backup.c and migrate.c
776 kes Eliminate warning messages from tray-monitor.c
778 kes Apply fix for scheduler for missing unlock_jobs().
779 kes Clean out autoconf caches before rebuilding configure
780 kes Fix the FreeBSD pthreads lib define updated by Dan.
781 kes Add missing semicolon in src/console/console.c
782 kes Add Robert's enhanced version of build-win32-cross-tools
783 as well as his patch file.
784 kes Note, the new gcc options are likely to break building of
785 wx-console or the tray-monitor ...
787 kes Implement Robert's suggestion to suppress printing compile lines.
788 kes Detect GCC correctly (I hope)
789 kes If using GCC (actually g++) add the following compiler flags
790 -fno-strict-aliasing -fno-exceptions -fno-rtti
792 ===================== Warning =============================
793 Turn on new bsnprintf() code. This could cause print output
795 ===========================================================
797 kes Fix crypto when not using openssl. I previously overlooked this.
798 kes Eliminate crypto type punning problems by eliminating void * and
799 using uint8_t * instead.
800 kes Harden authentication failure in FD by single threading errors
801 and forcing a 6 second wait.
803 ===================== Warning =============================
804 Removed 'Accept Any Volume' directive.
805 ===========================================================
807 kes Major cleanup and simplification of regress using shell functions
808 (more tests to be converted to new format)
809 kes Add detection of 64 bit Irix as indicated by user.
810 kes Increment catalog database id from 9 to 10.
811 kes Add a few of the new database fields to the various C++
813 kes Implement code to fill in the most important new fields (e.g.
815 kes Ensure that most of the new fields are in create/get/insert/update.
816 More work to be done.
818 kes Update some very old licenses in src/cats.
819 kes Modify the database format for handling Migration jobs:
820 Add PriorJobId, RealEndTime to Job table
822 Remove Stripe from JobMedia record (not used, wasting space)
823 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
824 Add Cost to Location table.
825 kes Delete mac_record subroutines.
826 kes Add new table values to create/update/get routines as appropriate.
827 kes Update the update_tables and make_tables scripts.
828 kes Make a first cut in using a union where multiple pointers (actually
829 pointers to pointers) are stored.
830 kes Make some changes to base64.c suggested by Robert and others and add
831 a small amount of documentation.
832 kes Add some changes suggested by Peter for Solaris (bregex...)
833 kes Make runscript.h always built because it needs to be pulled into
834 more places. In particular its RES was left out of a union.
835 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
836 This makes it slightly easier to detect uninitialized variables.
838 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
839 sometimes creates install problems.
840 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
841 Nelson's code. More to do.
842 kes Convert a few store_bit to store_bool in filed_conf.c.
843 kes DVD tweak to block.c as supplied by Uwe Muessel.
845 kes Modify configure.in to check for typeof().
846 kes In findlib/attribs.c use typeof instead of templates if possible.
848 kes Implement partial error messages for src/filed/acl.c
849 kes Fix return code to fail when doing update barcodes and
850 Pool resource is not found. This previously caused Volumes
851 to be labeled as cleaning tapes.
852 kes Small updates to projects.
854 kes Add Eric Bollengier patch for new RunScript directive. It breaks
855 compatibility between dird and fd.
857 kes Prevent DVD code from rewriting label if the device cannot be
859 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
860 fix Debian build bug.
861 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
862 kes Integrate manpages contributed by Jose Luis.
863 kes Update projects file.
864 kes Add manpages Makefile.in to configure.in
865 kes Remove installation of bacula.8 in scripts directory.
867 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
869 O_NOATIME is a open() flag which makes it possible to read a file without
870 updating the inode atime (and also without the inode ctime update which
871 happens if you try to set the atime back to its previous value). It also
872 prevents a race condition when two programs are reading the same file, but
873 only one does not want to change the atime. It's most useful for backup
874 programs and file integrity checkers (and bacula can fit on both
877 Recent versions of the Linux kernel and glibc have support for it (the
878 glibc support being mostly copying the O_NOATIME definition to
879 bits/fcntl.h). If there's no support for it on the kernel, trying to use
880 it does nothing (since the kernel ignores unknown flags).
882 If the kernel has support for it, trying to use it either works, fails
883 silently (mostly in remote filesystems), or returns errno=EPERM (if you
884 are not either the owner of the file or root). A simple way to prevent the
885 failure is to open the file without the flag and set it later with
886 fcntl(F_SETFL), ignoring any EPERM errors.
887 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
888 of restarted jobs to complete (due to a destroyed pthreads conditional
889 variable used by the message thread).
890 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
892 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
893 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
894 colons in query.sql file.
895 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
896 not to create orphans.
897 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
898 in restore long listing.
899 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
900 of incorrect MarkedId.
901 kes Apply patch from adioso bug #616 to correct text in manual (replace
902 Director with File daemon).
903 kes Rework a few of the zlib changes so that they build properly.
906 kes Move DIR 'run' command to SD before starting the message thread
907 as suggested by Cristopher Hull to avoid a race deadlock from
908 two threads using the bsock structure.
909 kes Modify LICENSE to correct some problems pointed out by Debian.
911 kes Correct EOF with no \n lex.c problem.
912 kes Tweak compat.h compat.cpp and merge with apcupsd
913 kes Add additional INFO messages if autochanger cannot be used.
916 kes Simplify Win32 Makefile
917 kes Correct count of buffers/bytes used by smartall.c
918 kes Updated compat.h after porting apcupsd to MinGW.
920 kes Work on getting wx-console building on MinGW. wxWidgets now builds
921 started adding Makefile ...
922 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
924 kes Reloading a bad configuration file doesn't kill director any more.
925 Thanks to fix from Eric Bollengier.
927 kes Fix problem of accents with new Win32 code.
928 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
929 works in the MinGW build with the exception that there
930 is a problem with accented characters -kes i.e. there is
931 some mapping problem with wide characters.
932 kes The code no longer compiles with Microsoft VC++.
934 kes Start implementing Christopher's St.Bernard code.
935 kes Add Christopher's mods for opening files.
936 kes Strip \r \n from Win32 error messages (Christopher)
937 kes Add more info about Win32 system if unknown (Christopher)
938 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
939 kes Fix a number of incorrect strings marked for translation, when
940 they should not be (e.g. commands).
941 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
942 Patches supplied by user in bugs #608 and #599.
943 kes Use most recent of st_ctime and st_mtime in restore tree DIR
944 listing. This fixes some problems with Win32 printing incorrect
946 kes Correct the clock shift comm time calculation between the DIR
947 and the FD. It was added rather than subtracted.
948 kes Strip all backslashes in filenames to be restored on Win32
949 machines -kes the names should all be in Unix format, and if
950 there are any backslashes it is most likely due to an improper
951 FileSet definition, and the files will not otherwise be
953 kes Remove lib/regex.c (replaced by bregex.c).
954 kes Delete src/win32/License.txt
955 kes Modify installer to install LICENSE
957 kes Fix bug in build-win32-cross-tools script reported by Howard
958 kes Implement cross compiled bconsole
960 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
961 kes Write first cut of README.mingw32
962 kes Add back ua_label barcode fix from Rufolf Cejka.
963 kes Integrate the majority of the Mingw cross-tools submission
964 made by Howard Thomson. Everything compiles, with zlib, openssl,
965 and VSS turned off. Linking needs a pthreads library ...
967 kes Add 'Dir Status' button to the gnome console.
968 kes More work on migration.
969 kes Restore non-compatible base64 coding to permit compatibility.
970 kes Display heap stats in Storage daemon without debug level.
972 kes Integrate most of the MinGW changes -kes more to do.
974 kes Implement using pg_config for finding PostgreSQL files.
975 Fixes bug #600. Patch supplied by user.
976 kes Remove -t option from mktemp in mtx_changer.in and use
977 working directory. Fixes bug #578.
978 kes Update job start time after the any run before job so that
979 files created by the script are only backed up once. Fixes
981 kes Strip trailing newline only from filenames entered in
982 the restore command when reading a file. This permits
983 the user to enter filenames with trailing spaces. Fixes
984 bug #549. The user supplied a patch that I modified slightly.
985 kes Use the most recent time (st_mtime, st_ctime) in the dir
986 command in restore. This gives the user a better idea of what
987 the newest file really is. This fixes bug #574. The fix
988 was suggested by the user.
989 kes Implement a compatible version of base64. This permits external
990 programs to duplicate Bacula's base64 algorithm using standard
991 routines. This fixes bugs #296, and 565. Patch submitted by
993 ================= Note ========================
994 Previous Signatures stored in the database are no longer
995 compatible with this. The main downside is for Verify jobs,
996 and doing an InitCatalog run will fix the problem. Also, the
997 authentication between the deamons is changed, so all daemons
998 must be simultaneously upgraded.
999 ==============================================
1000 If you don't like this fix, set:
1001 const bool compatible = true;
1003 const bool compatible = false;
1006 kes Ensure that DB signature is never NULL.
1007 kes Ensure that DB table names are not translated.
1008 kes Fix scheduler to handle time skew (eg daylight savings).
1009 kes Fix scheduler to use lock_jobs() to avoid most problems
1010 with reload. Window is now milliseconds.
1012 kes Apply patch from Christopher Hull
1013 kes Allow multiple connections to database with different
1015 kes Invalidate the scheduler when doing a reload. Fixes seg
1016 fault, but still 60 second window.
1017 kes Additional info in Reschedule message.
1018 kes Use set_jcr_job_status() everywhere to prevent loss of
1020 kes Display peer IP in FD if error from connecting DIR.
1021 kes Don't increment file count for DIRBEGIN.
1022 kes Replace illegal characters in Win32 filename by _.
1023 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1024 kes Hash hard link filenames rather than linked list.
1025 kes Fix for security failure in chdir on Win32.
1026 kes Add CreateDirectoryA/W win32 API entry points.
1027 kes Add /silent option to Win32 FD for Install/Remove service.
1028 kes Always print Heap statistics in FD.
1030 kes Remove the -f option from the chown in Makefile.in for more
1032 kes Change setting the group in Makefile.in to use chgrp for
1034 kes Implement a write_store and read_store to replace
1035 dirstore in reserve.c
1036 kes Implement a Bacula read/write lock for Python rather
1037 than using the Python lock to avoid recursive problems.
1038 kes Correct the uninstall directory names in filed/Makefile.in
1039 as reported by a user.
1041 kes Correct some problems with database creation (new tables).
1042 kes Replace a bunch of old 0x%x by %p.
1043 kes Get first cut of Migration with Job selection working.
1045 kes Change store_bit() to store_bool() for the Spooling in
1046 dird_conf.c -kes bug reported by Robert Nelson.
1048 kes Correct Makefile bug found by Dan Langille.
1050 kes Correct Makefile for Solaris /bin/sh
1051 kes Correct mtx-changer.in for Solaris /bin/sh
1052 kes Abort if a conf resource does not have a Name =
1054 kes Change the name of the regex program to bregex.
1055 kes Add the bwild program to the tools directory. It is similar
1056 to the bregex program.
1057 kes Implement create bregex.h and bregex.c in src/lib from the
1058 Python regexp program.
1059 kes Use the new bregex.c to implement Regex expressions on Win32.
1061 kes More work on migration.
1062 kes Implement wild program in tools directory for testing
1063 wild-cards. Almost identical to the regex program.
1064 kes Up port VSS single thread locking code.
1065 kes Replace N_(..) by NT_(...) to inhibit translation of
1067 kes Modify Makefile to change the permissions on Working Directory
1068 to 770 if the directory is created.
1069 kes Do not fail the Makefile if changing the permissions or
1070 owner/group on WorkingDir fails.
1071 kes Remove early selection of Scratch Volumes in the recycling
1073 kes Correct the old recycling algorithm so that Scratch Volumes
1074 are selected when looking for a Volume in the changer.
1075 kes Correct a typo in the Verify SQL reported by Joe Park.
1077 kes Remove automatic case folding on Windows FDs. You must
1078 explictly use the 'Ignore Case = yes' option.
1079 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1080 scratch volume in an Autochanger early in the 'recycling'
1083 kes Make weof() and clrerror() methods of class DEVICE.
1085 kes Tweak license to include Microsoft restrictions.
1086 kes Move mysql.reconnect to after real_connect(). Thanks to
1087 Frank Sweetser for the patch.
1088 kes Disallow a backslash in a File = directive (Windows junk)
1089 unless the string is quoted.
1090 kes Apply Eric's patch to ua_label.c so that daemon protocol
1092 kes Add NT_ definition for strings that should not be translated.
1093 kes Apply NT_() to ua_label.c
1094 kes Remove timed wait for VSS on Win2K3 as it is not yet
1096 kes Correct bacula.in script to reference bacula-ctl-xx in the
1097 sysconfig directory rather than the bin directory.
1099 kes Fix a long standing bug in the bacula start/stop scripts.
1100 kes Attempt to add the new bacula-ctl-* files to the rpm.
1101 kes Switch to using typeof() for list traversing to avoid
1102 as many FC5 g++ compiler warnings as possible.
1104 kes Split the bacula start/start script into four files:
1105 bacula -kes starts and stops calling other scripts
1106 bacula-ctl-dir -kes starts/stops the director
1107 bacula-ctl-fd -kes starts/stops the File daemon
1108 bacula-ctl-sd -kes starts/stops the Storage daemon
1110 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1111 kes Correct editing of JobId from int to int64 in fd_cmds.c
1112 kes Eliminate FileSet name race with bash_spaces() and multiple
1113 threads by bashing in a local.
1114 kes Fix error return from 'use storage' to print a correct error
1115 message rather than nothing.
1116 kes Correct false re-read last block error message when two jobs
1117 are simultaneously writing at the end of a tape.
1118 kes Simplify exit conditions in the reserve.c code to avoid
1119 possible non-release of reservation_lock().
1120 kes Suffle lock order in reserve to avoid deadlock between
1121 reservation lock and device mutex.
1123 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1124 tracking this down for me !!!! as it broke the Win32 build.
1126 kes Integrate addition of line count limitation to bsmtp -l from
1127 Sebastian Stark <stark at tuebingen.mpg.de>
1129 kes Implement regex test program in tools directory.
1130 kes Attempt to fix time problem with bsmtp with foreign langs.
1131 kes Add strip_trailing_newline() submitted by user.
1132 kes Implement regex matching in migrate.c
1134 kes Fix bug #537 to allow arbitrary time to mount a volume for
1135 restore, if polling is turned on.
1136 kes If dir_user or dir-group is specified in ./configure apply it to
1137 the working-dir. Fixes bug #533.
1138 kes If rescheduling a job cancel the previous incarnation with the SD.
1139 Fixes bugs #566 and 557.
1140 kes Fix bug #567 do_message() definition type conflict.
1143 kes Add more jcr methods and make mutex and use_count private.
1144 kes Create lock/unlock methods for jcr.
1145 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1146 records to get to seek position.
1147 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1148 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1149 terminates correctly by doing pthread_kill(). Do not destroy
1150 SD cond wait variable between executions of the job. Use local
1151 mutex for cond variable to avoid blocking jcr chain. Fix poor
1152 use of jcr use count in jobq.c for restarted jobs.
1153 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1154 lib/jcr.c -kes prevents locking the jcr chaing.
1155 kes Apply patch from bug #564, which corrects listing volumes with
1156 multiple autochangers. Apply same fix to next volume list.
1157 kes Fix bug #562 where restore bootstrap file is not unique.
1158 kes More details in implementing David's migration syntax proposal.
1159 kes Save and restore dcr when swapping drives so that if we have
1160 a write dcr it is not lost.
1161 kes Use new routine lock_reservations() to lock the reservations
1162 system, and call it while looking for a volume in askdir.c.
1163 This could possibly fix bug #543.
1164 kes Stop SD command loop if job is canceled.
1167 kes Remove old code from findlib/create_file.c
1168 kes Rename mac.c migrate.c
1169 kes Add user friendly display of VolBytes in job report.
1170 kes Rename target... to previous... to make it a bit easier to
1172 kes Add selection type and selection pattern to Migration (idea
1173 given by David Boyes).
1176 kes The po files should now be current.
1177 kes Fix new sql_use_result() code to properly release the
1178 buffers in all cases.
1179 kes Use the keyword ujobid to mean the unique job id; job or jobname
1180 to mean the Job name given on the Name directive, and jobid to
1181 be the numeric (non-unique) job id.
1182 kes Allow listing by any of the above.
1183 kes Add the user friendly job report code for reporting job elapsed time
1184 and rates with suffexes from John Kodis <kodis at comcast.net>.
1185 kes Add Priority and JobLevel as Python settable items.
1186 kes Use TEMPORARY table creation where the table is created by
1188 kes Add new code submitted by Eric for waiting on specific jobid.
1189 kes Add ACL checking for the dot commands.
1190 kes Fix restore of writable FIFOs.
1191 kes Fix a bug in bpipe where the string was freed too early.
1193 kes Modify the Python class examples to inherit object -kes new way
1194 of defining classes. Patch from Felix Schwarz.
1195 kes Implement jobuid to replace old usage of job in keywords as
1196 suggested by Eric Bollengier.
1197 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1198 wait (wait for all jobs to stop)
1200 wait jobuid=unique id
1202 kes Implement write variables for Python to set Priority (anytime), and
1203 Job Level, only during JobInit event.
1205 kes Fix the block listing bug pointed out by Arno.
1206 kes Update the po files at Eric's request.
1208 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1209 accept time qualifiers.
1210 kes Make catalog respect ACL.
1211 kes Add recycle count to Media record.
1213 Changes to 1.39.6-beta1 24Feb04
1215 kes Add Rudolf Cejka's new rc-chio-changer.
1216 kes Implement pulling Volume from Scratch Pool if the
1217 Volume is in the autochanger.
1218 kes Implement additional command arguments for update Volume.
1222 kes Back port changes to 1.38.5
1223 kes Fix recycle SQL for StorageId.
1224 kes Fix misplaced quote in mtx-changer script.
1226 kes Note. Your database must be updated, or you must create
1227 a new database. I have not yet incremented the database level.
1228 kes Add Location table.
1229 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1231 kes Implement create/get mac record in database for adding extended
1232 Migration data to the job record.
1233 kes Add new MAC table to update/make database scripts.
1234 kes Return Storage name used when getting VolumeNames for a job.
1235 kes Change bsr file keyword Storage to Device, which is more accurate.
1236 kes Ensure that Mac records are pruned/purged.
1237 kes Tweak SD tools to deal with changing media type.
1238 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1239 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1240 that the subroutine can switch devices, and hence dcrs.
1241 kes Modify the multiple MediaType read code to re-use the same
1242 dcr when switching devices. This makes the code much more
1244 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1245 from a table for restore.
1246 kes Add Storage name to VolParams, but it really should be Device.
1248 kes Add disk-changer to scripts directory + configure/Makefile
1249 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1250 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1251 kes Implement new store_bool that stores in a bool.
1252 kes Add true/false to yes/no conf directives.
1253 kes Make first cut at changing appropriate store_yesno to store_bool.
1254 kes Complete implementation of Pool storage devices.
1255 kes Move starting clones to job.c
1256 kes Move create_restore_bootstrap_file() to job.c
1257 kes Make copy_storage() more general to be able to handle
1259 kes Cleanup a lot of migration code for manual running, including
1261 kes Move getting a scratch Volume into a subroutine.
1262 kes Make all places a Volume that is added to a pool to
1264 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1265 kes Fix segfault in restore command when no value specified.
1266 kes Start adding code to handle multiple MediaTypes in restore.
1267 kes Eliminate race condition in getting Volume name for
1268 two drive autochanger.
1269 kes More debug code in autochanger.
1270 kes Add storage keyword to bootstrap file, add parsing.
1271 kes Move slot in bsr file into Volume record as there will be
1272 a different slot for each Volume.
1273 kes Create reserve.h
1275 kes Implement Pool storage overrides.
1277 kes Implement first cut of Migration.
1278 kes Implement mysql_use_result() from patch by Karl Hakimian.
1279 This reduces significantly the memory consumption during
1280 the restore tree building, and hence runs faster too.
1281 kes Implement StorageId patch supplied by user (reggie) in bug
1282 #536. This should permit Bacula to work correctly with two
1284 kes Implement Job listing variations suggested by a user.
1285 kes Move updating bootstrap code in backup.c to subroutine
1286 update_bootstrap_file().
1287 kes Add new job status elapsed time and bytes written user
1288 friendly job report output patch sent by John Kodis
1289 <kodis at comcast.ne>.
1290 kes Implement a storage list in Pools.
1291 kes Separate out setup_job() code from run_job().
1292 kes Get migration working -kes lots of changes in mac.c in both
1294 kes Apply patch from user (Eric Bollengier I think) that fixes a
1295 DIR crash when no arguments are supplied to a dot command.
1296 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1297 kes Fix command arg name->volume in label command of gnome-console.
1298 kes Fix SD acquire.c to release correct DCR by explicitly testing
1299 on the dcr address rather than trying to devine if it is a read
1300 or write dcr. This failed in error conditions when the device was
1304 kes Apply user supplied patch for more readable rate output
1306 kes Continue implementing migration.
1307 kes Implement support for removable filesystems in SD.
1308 kes Ensure that btraceback scripts can be read by anyone.
1309 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1310 kes Correct bug where canceling restore before the FD contacts
1311 the SD causes the drive to be left in read mode.
1312 kes Move ofline_or_rewind into DEVICE::close().
1313 kes Eliminate close_device.
1314 kes Convert several dev subroutines to methods (e.g. bsf,
1316 kes Eliminate force_close_device().
1317 kes Implement Device Type directive in Device resource that
1318 can have values File, Tape, Fifo, DVD, or Prog.
1319 kes Add has_cap() method to Device.
1322 kes Add patch from bug #527 to allow RedHat user to specify
1323 options/user/group for starting each daemon in
1324 /etc/sysconf/bacula.
1326 kes Add two new queries to query.sql provided by Arno. One
1327 list volumes known to the Storage device, and the other
1328 lists volumes possibly needing replacement (error, ...).
1330 kes Add periodic (every 24 hours) garbage collection of memory
1331 pool by releasing free buffers.
1333 kes Correct bug counting sized (for display only) in smartall.c
1334 kes Print FD mempool stats if debug > 0 rather than 5.
1336 kes Make db_lock() mutex error fail the job rather than abort
1337 Bacula. Canceling the job caused the mutex to fail.
1338 kes Correct bug in alist.c that re-allocated the list if the
1339 number of items goes to zero.
1340 kes Move the reservation system thread locking to the top level
1341 so that one job at a time tries all possible drives before
1343 kes Implement a reservation 'fail' message queue that is built
1344 and destroyed on each pass through the reservation system.
1345 These messages are displayed in a 'Jobs waiting to reserve
1346 a drive' list during a 'status storage='. Note, multiple
1347 messages will generally print for each JobId because they
1348 represent the different problems with either the same drive
1349 or different drives. If this output proves too confusing
1350 of voluminous, I will display it only when debug level 1
1351 or greater is enabled in the SD.
1353 kes Add enable/disable job=<job-name>. This command prevents
1354 the specified job from being scheduled. Even when disabled,
1355 the job can be manually started from the console.
1356 kes During 'update slots' clear all InChanger flags where the
1357 StorageId is zero (old Media records).
1359 Beta release 1.38.4:
1361 kes Fix autochanger code to strip leading spaces from returned
1362 slots number. Remove bc from chio-changer.
1363 kes Back port a bit of 1.39 crypto code to reduce diffs.
1364 kes Fix first call to autochanger that missed close()ing the
1365 drive. Put close() just before each run_program(). Fixes
1368 kes Add PoolId to Job record when updating it at job start time.
1370 kes Pull in more code from 1.39 so that there are fewer file
1371 differences (the new ua_dotcmds.c, base64.h, crypto.h
1372 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1373 util.c. Aside from ua_dotcmds.c these are mostly crypto
1375 kes Implement new method of walking the jcr chain. The
1376 incr/dec of the use_count is done within the walking
1377 routines. This should prevent a jcr from being freed
1378 from under the walk routines.
1383 kes Start implementing Verify list output.
1384 kes Move the suitable_drive flag to a better place to prevent
1385 premature termination of the reservation if all drives
1386 are busy -kes should fix Arno's diff/inc pool failures.
1388 kes Add mutex to single thread VSS code in Win32.
1390 kes Simplify code in askdir.c that waits for creating an appendable
1391 volume so that it can handle multiple returns from the wait
1393 kes Modify the wait code to permit multiple returns.
1394 kes Return a zero when 'autochanger drives' is called and
1395 it is not an autochanger.
1396 kes Make rewind_dev() a method taking a DCR as an argument.
1397 This permits closing and reopening the drive if the
1398 rewind fails as happens if the drive was loaded while the
1399 file descriptor was open. This refreshes the file descriptor.
1400 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1401 if the device is open or not. This should eliminate
1403 kes Return error if reserve cannot find at least one suitable device.
1404 kes Make wait_for_sysop() return correct state information.
1405 kes Fix Win32 state file problem. write was not using compat
1406 code. This should fix bug #500.
1408 kes Modify gui on command to set only GUI mode and not batch.
1409 kes Modify .messages command to always print messages regardless
1411 kes If GUI mode is on, suppress automatic printing of
1413 kes Delete old bnet packet code.
1414 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1415 wx-console. -kes not implemented because bconsole must be updated.
1416 kes Modify restore command in wx-console to set gui on and to use
1417 only .messages instead of messages. Hopefully this fixes bug
1419 kes Fix seg fault in exit of acquire when canceling a job --
1420 reported by Wolfgang Denk
1421 kes Pull in latest reservation system changes from 1.38
1422 kes Make .messages command always print messages regardless
1423 of the automessages flag.
1425 kes Fix seg fault if user labels a drive directory bug #513
1426 kes Remove quotes around Version as it breaks things.
1428 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1429 kes Apply sparse code fix for raw drives and fifos. Bug 506
1430 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1432 kes Correct reservation system to do a last ditch try
1433 for any mounted volume, then anyone anywhere.
1434 kes Add quotes around table Version because of
1435 error in MySQL 4.1.15 -kes bug report submitted.
1436 kes Correct some minor problems with btape in the fill
1438 kes Updates to ssh-tunnel from Joshua Kugler.
1439 kes Added a report.pl program from Jonas Bjorklund.
1440 kes Simplify the O_NONBLOCK open() code for tape drives,
1441 and always open nonblocking.
1442 kes Do not wait for open() if EIO returned (shouldn't happen).
1443 kes Eliminate 3 argument to tape open().
1444 kes Correct the slot # edited in the 3995 Bad autochanger unload
1446 kes With -S on bscan (show progress) do not divide by zero.
1448 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1449 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1450 kes Remove unused code in wait_for_device.
1451 kes Make wait_for_device() always return after 60 seconds of wait.
1455 kes Add stubs for non-crypto build.
1457 kes Use localhost if no network configured
1459 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1460 kes Remove debug print.
1461 kes Add bail_out in error during state file reading.
1463 kes Merge changes made to 1.38.3 into HEAD
1464 kes Add stubs for pygtk-console code
1465 kes Create Makefile.in for pygtk-console code
1467 kes Merge updates into 1.38 branch
1468 kes Update specs to include mysql4 define.
1469 kes Fix when attributes are sent, must be after binit().
1470 kes Stop read_record() if status not ok in second loop.
1471 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1472 and partial records in read_record(). This allows bscan
1473 to get FileIndex at EOT correct.
1474 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1476 kes Fix Win32 built to work with new crypto code.
1477 kes Apply patch supplied by user (slightly modified) to fix
1478 correct detection of holes in block devices and FIFOs.
1480 kes Apply patch supplied by user (slightly modified)
1481 to fix SD hang with multiple pools and bad client
1482 IP. Fixes bug # 508.
1484 kes Add nagios plugin to the examples directory. Submitted by
1486 kes Remove warning message about multiple saves of hardlinked files
1487 from find_one.c as it can generate too many warning messages.
1488 kes Modify most restore error messages to be queued so that they
1489 appear at the end of the job rather than mixted with the restore
1490 listing where they could be 'lost'.
1492 kes Reset timeout values before select() per patch from
1493 Frank Sweetser for problems with non-blocking sockets.
1494 kes Unlink the state file if either reading or writing it gets
1495 errors. Hopefully this will fix Win32 exit problems.
1496 kes Add sanity check in append.c to ensure that dcr is not NULL.
1497 This can happen if multiple drive autochanger SCSI control
1498 channel and drive indicies do not correspond.
1500 kes Get next volume from Scratch pool before creating a volume.
1501 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1502 kes Remove argument from create_bacula_database for SQLite as it
1504 kes Add back index code so that two drive autochangers can get
1506 kes Change a bunch of debug levels to aid debugging autochangers.
1507 kes Fix reservation so that mutexes are properly applied.
1508 kes Rework reservation algorithm so that two drives can be used
1511 kes Landon merged his data encription changes into the HEAD
1512 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1513 If this patch is applied, the number of days can be specified with
1514 'list nextvol days=xx'
1516 'status dir days=xx'
1517 My use case is to be able to preview the next scheduled job (and the
1518 next tape to be used) on fridays if there are no scheduled jobs during
1522 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1523 kes Fix malformatted bnet error message that caused seg fault
1525 kes Applied user patch to improve README.vc8 in src/win32.
1527 kes Add Migrate, Copy, Archive Job types (some where there)
1528 kes Correct some more editing of JobId's (for 64 bit compatibility).
1529 kes Ensure that StorageId is stored in Media record when ever possible.
1530 kes Add Migration Job to Job.
1531 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1532 Next Pool to Pool resource.
1533 kes Add more code to mac.c (migration archive copy).
1534 kes Change Start Storage daemon job to require read and write storage
1536 kes Pass read storage data to SD as well as write storage data.
1537 kes Remove old code from winservice.cpp
1538 kes Break on error in scan.
1539 kes Fix typo in signal.c
1540 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1541 kes Cleanup how find_device() works.
1542 kes Add read output to Status in SD.
1545 kes Add red-black btree routines
1547 kes Remove abs() in bfile.c so that it compiles on Solaris.
1550 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1551 kes Fix bnet-server bug found on OpenBSD. Bug #486
1552 kes Fix cancel failure bug. Bug #481
1553 kes Fix failure when Pool name has spaces. Bug #487
1554 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1555 kes Fix a couple of free()s in src/filed/acl.c
1556 kes Fix memory overrun in bfile.c in building OS X resource
1557 fork filename. Bug #489
1558 kes Add Pool name to SD status output.
1560 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1561 kes Make sure to set storage before trying to set drive.
1562 kes Add bacula_mail_summary.sh to examples directory. It makes
1563 a single email summary of any number of jobs. Submitted
1565 kes Make sure when we do a mount to unblock the device even
1566 if the drive could not be opened.
1568 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1569 and correct a few minor problems to make it build on Linux.
1571 kes Remove delete of CVS from all Makefiles
1572 kes Fix seg fault when clicking on Add button in wx-console
1573 restore panel. Bug #470.
1574 kes Fix copyright date and URL typo -kes bug #468.
1575 kes Change autostart install for FreeBSD to look for rc.conf
1576 rather than rc.local as suggested fix for bug #466.
1577 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1578 grant on status. Bug #465
1579 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1580 update script. Bug #464
1581 kes Tweak #ifdefing a bit in new Win32 stream code.
1582 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1583 kes Add documentation of performance #defines
projects / bacula / bacula / blob