1 Technical notes on version 1.39
5 kes Minor Makefile fixes.
6 kes Put attach_dcr_to_dev in a subroutine.
7 kes Make attaching/detaching to/from a device use a flag and
8 only detach if actually attached.
9 kes Add dvd-simulator.in to scripts directory and add to configure.
10 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
11 This could be a cause of a number of drive reservation problems.
12 Note, this code is now in attach_dcr_to_dev().
13 kes Suppress doing Volume updates if it is a system job. This should
14 prevent the DVD label blocking.
15 kes Clear the freespace ok flag in a couple of strategic places.
17 kes Put removing zero sized spool part file in subroutine and
18 call from release_device().
19 kes Add Richard's patch for relabel to dircmd.c, but save and restore
21 kes Rework a lot of subroutines in dev.c to take dcr as an
22 argument. This is done to eliminate the usage of attached_dcrs
24 kes Change truncated_dvd to blank_dvd, which seems more suitable.
25 kes Apply most of Richard Mortimer's truncate patch.
26 kes Create lseek() method for DEVICE that takes dcr as an
27 argument. This is to eliminate the use of attached_dcrs in
28 lseek(). The calls to lseek_dev() must still be changed.
30 kes Apply Richard Mortimer's patches for printing an error
31 message in btape when a DVD is used, and to initialize traceback.
32 kes Added error message to btape when trying to access a file.
33 kes Move prototype of update_slots() to protos.h.
35 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
36 and FDJobStatus to the Director Python variables.
37 kes Make sure valid argument passed to str_to_utime() where Arno
39 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
40 I.e. part of two different patches.
42 kes Modify disk changer to simulate some of the error conditions
44 kes Make sure the close() call in the SD tools is just before the
46 kes Implement dir_get_volume_info() in bls using the patch from
47 Richard Mortimer but call find_num_dvd_parts().
48 kes Implement find_num_dvd_parts() that mounts and scans a DVD
50 kes Move the omode code in open_dvd() up so that the cannot
51 write on blank disk can check can be bypassed for read mode.
54 kes Disable normal data spooling for DVD writing which uses
55 a different spooling mechanism.
56 kes Apply patch from Richard Mortimer to ensure that the number
57 of DVD parts is correctly updated.
59 Version 1.39.22 beta released:
61 kes Fix logic error in handling error return from mtx-changer
63 kes Make status from SD aware of -1 (unknown) Slot status.
64 kes At Eric's suggestion make both the "slots" and "drive" commands
65 to the Storage daemon work even if the drive is busy.
66 kes Make two separate Win32 menu links for starting bconsole and
67 wx-console in winbacula.nsi
68 kes Apply DVD part_spooled patch from Richard Mortimer
70 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
71 rbn Fixed problems migrating settings from previous releases in
72 Win32 installer. Add Readme.txt with an option to show it on
73 the installer Finish page.
75 kes Use get_catalog_resource() to open catalog database
76 to ensure that ACLs are respected and that user is
77 correctly prompted for database.
78 kes Integrate multiple console/director patch from
79 Carsten Paeth calle@calle.in-berlin.de
80 ebl Add character substitution in Job/JobDefs WriteBootStrap.
81 You can use now 'WriteBootStrap = "/path/%c_%n.bsr"'
82 kes Apply patch supplied in bug #656 to pass priority field
83 in the run dialog to the Director in gnome console
84 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
85 this will fix bug #627 where Bacula eventually gets
86 confused about what Volume it wants.
87 kes Add a new close_part() class in the SD to save the device
88 state around open/close_part/open for DVD writing. This
89 should fix the num_dvd_parts getting zeroed as reported by
91 kes Apply patch from Richard Mortimer that correct edit code
92 for debug output of st_size.
93 ebl Add support of encrypted data stream to bscan.
94 display data_len instead of data content (may be binary)
96 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
97 bcopy. Fixes bug #669 reported by Eric.
98 kes Fix incorrect number of arguments in SQL statement in
99 sql_get.c as reported by Eric.
101 kes Update examples directory.
102 kes Remove unused variable in winservice.cpp
103 kes Make Win32 make command build installer.
105 kes Correct dvd code that breaks tape labeling.
106 kes Implement Enabled on update slots.
108 kes When doing a label, pass the VolBytes back to the Director,
109 which puts it in the catalog.
110 kes Print an error message if the user attempts to prune an
112 kes Need to start using %ld when sscanfing 32 bit values.
114 kes Correct the counting of VolCatBytes for DVDs.
115 kes Add code to mount.c to require that VolCatBytes corresponds to
116 what is actually found when doing an append.
117 kes Update freespace only after writing on the DVD.
118 kes Remove code that blows away the current part in the spool file.
120 kes Apply new dvd-handler patch from Richard Mortimer.
121 kes Tweak so that debug level 20 shows only DVD commands.
122 kes Correct spooled_part flag in dev.c close() so that it is cleared
123 when the spool file is deleted or does not exist.
124 kes Print part number in read_records when eof hit (restore).
126 -es Make find with no args in tree restore return error rather than
127 stopping the selection. Fixes bug #665
128 kes Rework DVD writing to ensure that the last part is written
129 on open_next_part when dealing with a spool file.
130 kes Correct the lseek_dev() routine to handle end point correctly
131 (bug introduced by me).
132 kes Allow part number to exceed num_dvd_parts in lseek_dev().
134 kes Apply dvd-handler patch from Richard Mortimer.
135 kes Apply dvd error check patch from Richard Mortimer.
136 kes Apply bpipe race patch from Richard Mortimer.
137 kes Rework how DVD labels are handled and set append only
138 when part > num_dvd_parts.
140 kes Rework many features of DVD writing and reading. Added many error
141 messages. Most importantly changed part to represent the current
142 part number base zero. This makes current DVD writing incompatible
143 with previous version.
145 kes Add host:port to connect failure messages to FD and SD from Dir.
146 kes Add WhereACL to console ACL list. If nothing is specified, only
147 the default is permitted for restore. Otherwise, *all* allows any
148 path, or you can specify permitted paths. This should allow control
149 over where users can restore files. This is untested.
150 kes Modified message to add a ? (as in loaded?) when querying the autochanger
151 for what Slot is loaded.
152 kes Fixed the use of Slot, so that is more correctly maintained, thus
153 eliminating unneeded duplicate calls to determine what Slot is loaded.
155 kes Install man pages with 'make install'
156 kes wx-console crashes because of differences between Bacula and wxWidgets
157 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
159 kes correct improper indenting in wx-console/console_conf.c
160 kes update wx-console header copyrights
161 kes Fix bug #658 where wx-console mangles file/directory names containing
164 kes Add Media.Enabled flag to client backups for dotcmds.c
165 kes Enforce Media.Enabled=1 for a current restore to work.
166 kes Require restore case 3 to have sqlquery permission to work.
167 kes Remove obsolete del_MAC sql command.
168 kes Ensure that bscan creates Volumes with Enabled=1.
170 Version 1.39.20 beta released:
172 kes Correct missing Client table reference in SQL pointed out by
175 kes Fix Win32 build (new entrypoint, start baculafd).
177 kes Add -n option to bconsole to turn off conio.
178 kes Print JobIds to be migrated in Job Report.
179 kes Add additional user supplied notes to the messages part of
180 bacula-dir.conf concerning multiple email addresses.
181 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
182 kes Add more recent Feature requests to Projects file.
184 kes Apply Maritn's fix to src/win32/Makefile.
185 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
186 kes Implement pruning for Migration and migrated jobs.
187 kes Implement PoolOccupancy migration.
188 kes Implement PoolTime migration.
190 kes If doing a mount, look for a slot, and if specified pass it to
191 the SD so that it can load the autochanger.
192 kes Return DVD=1 flag if a label command is done to a DVD. This
193 permits setting VolParts to 1.
194 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
195 rework ua_label code based on DVD media type to use DVD flag returned.
197 kes Eliminate some compile warnings in dird_conf.c
198 kes Format the bytes field in the terminated jobs part of the status
199 command for the three daemons with suffixes to reduce print size
200 of backup bytes. Suggested by a user.
201 kes When not descending into a directory, print the File= name that
202 triggered it -- makes why not descending a bit clearer.
203 kes Do not unload autochanger when doing a list command -- basic code
204 from Eric Bollengier.
206 kes Fix bug #462 incorrect error message printed when client script called
207 from File= was not found.
208 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
209 do a rewind on Solaris when no tape is in the drive (Solaris does not
210 have the detailed errno found on Linux). Added Solaris specific code.
211 Note, this may apply to other OSes as well.
213 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
214 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
215 fix bug 648 - update sqlite script patches, lock out gnome2console
216 builds for platforms with gtk+ < 2.4.
217 Updated build_rpm.sh - add remote source directory, add switch for
218 signing, refine file names.
219 Updated spec file again for Mandriva build as they have this curious
220 custom of silently converting all manpages to bzip2 format just before
221 the final packaging step.
223 rbn Fixed the Windows Makefiles so that they won't accidentally try and
224 pickup binaries for the Unix build. This allows both the Unix
225 build and the Windows build to be built in the same tree without
226 interfering with each other.
227 rbn Fixed error handling and cleaned up mtx-changer.cmd.
228 rbn Added the rest of the database scripts. These are installed but are
229 not yet edited for variable replacement.
230 rbn Broke out the cats functionality from bacula.dll and put into new
231 separate dlls for each database type. At installation time the
232 correct one is copied to bacula_cats.dll.
233 rbn Eliminate the need to install the mysql.dll on client only builds.
234 rbn Moved dird/sql_cmds.c into the cats directory so all the database
235 specific #ifdefs were in the cats directory.
236 rbn Added a new sql_cmds.h with all the declarations for the variables
237 exported from sql_cmds.c.
238 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
239 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
241 kes Correct improperly formatted list command output reported by Dan.
243 kes Correct despool time calculation.
245 kes Remove previous changes to compat.cpp as they create problems.
246 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
247 kes Attempt to fix problems with the msg_queue crashing on Solaris
248 when Bacula is terminating, but problems remain.
249 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
250 name editing problems with too many \\?\es.
251 kes Fix some Bacula source code style problems in compat.cpp.
252 kes Add debug code to compat.cpp and convert non-Bacula debug code
255 kes Change the name of the technical notes file from kes-1.39 to
256 technotes-1.39. Prefix my messages with 'kes '.
257 kes Allow dequeue_messages() to be called twice. Should fix bug
259 kes Add Job type to bscan Job information output.
261 kes Update copyright date in program files, and for the most part
263 kes Implement %q in bsnprintf.c apparently I forgot it.
265 kes Make disk-changer sed command compatible with FreeBSD.
266 kes Make a first cut at a ReleaseNotes and ChangeLog for a
268 kes Make make clean descend into the src/win32 directory.
269 kes Fix some #ifdefing so that Solaris and FreeBSD compile
270 sys/stat.h was turned off.
271 kes Use suffix editing for new transfer rate messages.
272 kes Attempt to come up with a workaround which seems to be an OS
273 bug where write() returns EBUSY. IMO this should not happen.
274 It triggered in truncatebug test. The workaround retries using
276 kes Eliminate a strerror() call in a class method that failed with
278 kes Use rm -rf rather than rmdir to delete the src/win32/release
279 directory during make clean.
281 kes Make bscan ignore ACL streams.
282 kes Update projects files with new Feature Requests.
283 kes Generate current English and French manuals and upload
285 kes Update the home page to include the new British/French flags to
286 switch between translations. Work done by Alexandre Baron.
287 kes Make disk-changer script print an error message if the changer
288 directory is not defined.
289 kes Create a generic DB routine for getting an int (32/64 bit) from
291 kes Add more migration code.
292 kes Add a few more files to .cvsignore here and there.
293 kes Minor fixes for SD write rate and despooling rate.
294 kes Turn off new test code in src/console.c
298 kes Incremented the version number to signify that all of Robert's code
299 for Win32 that was in the branch is now integrated into the HEAD,
300 and that Eric has submitted code that we hope will provide limited
301 backward compatibility with 1.38 file daemons (more testing to be
303 kes I rationalized a few of the names of the variables (mainly jcr names)
304 that are used during migration as keeping three different jcrs at the
305 same time clear in ones head is not easy.
309 eb Tweak new runscript feature to work with 1.38.x FDs.
310 eb Correct crypto.c to fix segfault when restoring an encrypted stream
311 on fd which don't use rsa keys.
312 eb Add yes/no English keywords on localized yes/no questions.
314 kes Several important commits from Robert Nelson for code cleanup and
316 kes Modify console.c so that when conio is enabled, it converts \n to
317 \n\r before outputting to the console. Hopefully this will fix
318 the problems with expect in Perl that Eric saw.
320 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
322 kes Add Comment field to llist of a volume.
323 kes Allow true/false in some yes/no questions.
324 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
325 kes Remove a few /n's when scanning commands from another daemon. This
326 permits adding additional fields later.
327 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
328 kes Update README.mingw
330 kes Tweak authentication to work with 1.38.x FDs.
331 kes Tweak catalog make scripts.
332 kes Fix catalog upgrade scripts so that they work.
333 kes Correct despooling debug code to eliminate race condition.
335 kes Add additional fields as specified by Arno to LocationLog.
336 kes Add comment field to the Media record.
337 kes Add Time field to the Log record.
338 kes Correct migration SQL (thanks to Bill Moran) so that it
339 runs with PostgreSQL also.
340 kes Add spooling/despooling info in status output of SD.
342 kes Spend a lot of time integrating mkcdrec with the rescue disk.
343 kes Add VOLMGMT message class for volume management messages (none yet).
344 kes Add CATALOG as a destination. It goes into the LOG table.
345 kes Implement the Log table in the DB.
346 kes Implement the Location Log table in the DB (for user use).
347 kes At Eric's request add a run_scripts() just after blast_data in
350 kes Add Enabled column to Location, correct some typos in DB schemas.
351 kes Correct bug I introduced into RunScripts enum.
352 kes Add log table to Catalog
353 kes Purge original job migrated if the migration terminates normally.
354 kes Cleanup purging of files/jobs so that it is done only in a
356 kes Add new VOLMGMT message class.
357 kes Add Catalog message destination (user conf code remains to be written).
359 kes Modify read_record and friends to properly deal with migration
361 kes Update debug code in read_record.
363 ======================= Warning ==========================
364 Separate read and write storage in Jobs in the Director. This
365 is a major rewrite of some of the low level code and hence has
366 a high probability of introducing bugs.
367 ==========================================================
369 kes Move the job init code up to *before* the job is put into
370 the job queue (resource allocation queue). This permits the
371 job to establish whether it will read or write or do both.
372 kes Add name() methods to all the resource classes.
373 kes Implement separate read and write storage resource
374 allocation/deallocation in jobq.c
376 ======================= Warning ==========================
377 Implemented new method of getting the default Storage from the Media
378 record rather than from the MediaType for restore. As a fall
379 back, if no Storage is defined, use the MediaType. This
380 eliminates most all prompts if there are multiple MediaTypes
381 used. This is an important and fundamental change.
382 ==========================================================
384 kes Add more detail (Storage, Device) to list of volumes printed
386 kes More code in migrate. In particular start multiple jobs if
388 kes Probably overkill, but ensure that the bsr is unique even within a
390 kes Rework bsys.c drop() so that it now should work as expected.
391 kes Update a bunch of old copyrights -kes particularly in .h files.
392 kes Remove src/lib/bshm.c/h
396 ======================= Warning ==========================
397 All hash codes in the database are now kept in world
398 compatible base64 format (no = filling). This means that
399 all FileSets will be updated and if you are running
400 verify jobs, you must do an InitCatalog.
401 Authentication uses the new algorithm, but should be
402 backward compatible with 1.38.x
403 ===========================================================
405 kes Modify the authentication routines so that the 1.39.15 Director
406 always runs with the compatible binary to base64 code (same as
407 the rest of the world). It will however detect if an SD or
408 FD is running the old code and if that is the case, will use
409 the old algorithm for authentication. However, all consoles must
410 use the compatible algorithm, and all data entered into the database
411 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
412 use the compatible algorithm.
413 kes Rename the cram_md5 routine names to be slightly more appropriate
414 to what they are doing (challenge and respond).
415 kes Robert committed his #ifdef and header cleanup.
417 kes Fix a compiler warning in files/backup.c
418 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
420 kes Robert committed his low impact changes.
421 kes I removed a size_t from the jcr.h definition.
422 kes Update the tape regression scripts (still to be tested).
423 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
424 kes Require done or quit to exit from in memory tree restore.
426 kes Write install/uninstall of new manpages. There are now a
427 pile of man pages. Some of which need a lot of work.
429 ======================= Warning ==========================
430 The --mandir ./configure option now points to the top level
431 man directory. The man files will be installed under
432 mandir/man8 and mandir/man1 as appropriate.
433 ==========================================================
435 kes Add complete text of GPL to LICENSE.
436 kes Implement job report that indicates where Storage and Pool
437 came from -kes with overrides and Pool storage and NextPool,
438 it is all very complicated.
439 kes Create a few common subroutines for backup.c and migrate.c
440 kes Eliminate warning messages from tray-monitor.c
442 kes Apply fix for scheduler for missing unlock_jobs().
443 kes Clean out autoconf caches before rebuilding configure
444 kes Fix the FreeBSD pthreads lib define updated by Dan.
445 kes Add missing semicolon in src/console/console.c
446 kes Add Robert's enhanced version of build-win32-cross-tools
447 as well as his patch file.
448 kes Note, the new gcc options are likely to break building of
449 wx-console or the tray-monitor ...
451 kes Implement Robert's suggestion to suppress printing compile lines.
452 kes Detect GCC correctly (I hope)
453 kes If using GCC (actually g++) add the following compiler flags
454 -fno-strict-aliasing -fno-exceptions -fno-rtti
456 ===================== Warning =============================
457 Turn on new bsnprintf() code. This could cause print output
459 ===========================================================
461 kes Fix crypto when not using openssl. I previously overlooked this.
462 kes Eliminate crypto type punning problems by eliminating void * and
463 using uint8_t * instead.
464 kes Harden authentication failure in FD by single threading errors
465 and forcing a 6 second wait.
467 ===================== Warning =============================
468 Removed "Accept Any Volume" directive.
469 ===========================================================
471 kes Major cleanup and simplification of regress using shell functions
472 (more tests to be converted to new format)
473 kes Add detection of 64 bit Irix as indicated by user.
474 kes Increment catalog database id from 9 to 10.
475 kes Add a few of the new database fields to the various C++
477 kes Implement code to fill in the most important new fields (e.g.
479 kes Ensure that most of the new fields are in create/get/insert/update.
480 More work to be done.
482 kes Update some very old licenses in src/cats.
483 kes Modify the database format for handling Migration jobs:
484 Add PriorJobId, RealEndTime to Job table
486 Remove Stripe from JobMedia record (not used, wasting space)
487 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
488 Add Cost to Location table.
489 kes Delete mac_record subroutines.
490 kes Add new table values to create/update/get routines as appropriate.
491 kes Update the update_tables and make_tables scripts.
492 kes Make a first cut in using a union where multiple pointers (actually
493 pointers to pointers) are stored.
494 kes Make some changes to base64.c suggested by Robert and others and add
495 a small amount of documentation.
496 kes Add some changes suggested by Peter for Solaris (bregex...)
497 kes Make runscript.h always built because it needs to be pulled into
498 more places. In particular its RES was left out of a union.
499 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
500 This makes it slightly easier to detect uninitialized variables.
502 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
503 sometimes creates install problems.
504 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
505 Nelson's code. More to do.
506 kes Convert a few store_bit to store_bool in filed_conf.c.
507 kes DVD tweak to block.c as supplied by Uwe Muessel.
509 kes Modify configure.in to check for typeof().
510 kes In findlib/attribs.c use typeof instead of templates if possible.
512 kes Implement partial error messages for src/filed/acl.c
513 kes Fix return code to fail when doing update barcodes and
514 Pool resource is not found. This previously caused Volumes
515 to be labeled as cleaning tapes.
516 kes Small updates to projects.
518 kes Add Eric Bollengier patch for new RunScript directive. It breaks
519 compatibility between dird and fd.
521 kes Prevent DVD code from rewriting label if the device cannot be
523 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
524 fix Debian build bug.
525 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
526 kes Integrate manpages contributed by Jose Luis.
527 kes Update projects file.
528 kes Add manpages Makefile.in to configure.in
529 kes Remove installation of bacula.8 in scripts directory.
531 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
533 O_NOATIME is a open() flag which makes it possible to read a file without
534 updating the inode atime (and also without the inode ctime update which
535 happens if you try to set the atime back to its previous value). It also
536 prevents a race condition when two programs are reading the same file, but
537 only one does not want to change the atime. It's most useful for backup
538 programs and file integrity checkers (and bacula can fit on both
541 Recent versions of the Linux kernel and glibc have support for it (the
542 glibc support being mostly copying the O_NOATIME definition to
543 bits/fcntl.h). If there's no support for it on the kernel, trying to use
544 it does nothing (since the kernel ignores unknown flags).
546 If the kernel has support for it, trying to use it either works, fails
547 silently (mostly in remote filesystems), or returns errno=EPERM (if you
548 are not either the owner of the file or root). A simple way to prevent the
549 failure is to open the file without the flag and set it later with
550 fcntl(F_SETFL), ignoring any EPERM errors.
551 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
552 of restarted jobs to complete (due to a destroyed pthreads conditional
553 variable used by the message thread).
554 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
556 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
557 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
558 colons in query.sql file.
559 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
560 not to create orphans.
561 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
562 in restore long listing.
563 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
564 of incorrect MarkedId.
565 kes Apply patch from adioso bug #616 to correct text in manual (replace
566 Director with File daemon).
567 kes Rework a few of the zlib changes so that they build properly.
570 kes Move DIR "run" command to SD before starting the message thread
571 as suggested by Cristopher Hull to avoid a race deadlock from
572 two threads using the bsock structure.
573 kes Modify LICENSE to correct some problems pointed out by Debian.
575 kes Correct EOF with no \n lex.c problem.
576 kes Tweak compat.h compat.cpp and merge with apcupsd
577 kes Add additional INFO messages if autochanger cannot be used.
580 kes Simplify Win32 Makefile
581 kes Correct count of buffers/bytes used by smartall.c
582 kes Updated compat.h after porting apcupsd to MinGW.
584 kes Work on getting wx-console building on MinGW. wxWidgets now builds
585 started adding Makefile ...
586 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
588 kes Reloading a bad configuration file doesn't kill director any more.
589 Thanks to fix from Eric Bollengier.
591 kes Fix problem of accents with new Win32 code.
592 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
593 works in the MinGW build with the exception that there
594 is a problem with accented characters -kes i.e. there is
595 some mapping problem with wide characters.
596 kes The code no longer compiles with Microsoft VC++.
598 kes Start implementing Christopher's St.Bernard code.
599 kes Add Christopher's mods for opening files.
600 kes Strip \r \n from Win32 error messages (Christopher)
601 kes Add more info about Win32 system if unknown (Christopher)
602 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
603 kes Fix a number of incorrect strings marked for translation, when
604 they should not be (e.g. commands).
605 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
606 Patches supplied by user in bugs #608 and #599.
607 kes Use most recent of st_ctime and st_mtime in restore tree DIR
608 listing. This fixes some problems with Win32 printing incorrect
610 kes Correct the clock shift comm time calculation between the DIR
611 and the FD. It was added rather than subtracted.
612 kes Strip all backslashes in filenames to be restored on Win32
613 machines -kes the names should all be in Unix format, and if
614 there are any backslashes it is most likely due to an improper
615 FileSet definition, and the files will not otherwise be
617 kes Remove lib/regex.c (replaced by bregex.c).
618 kes Delete src/win32/License.txt
619 kes Modify installer to install LICENSE
621 kes Fix bug in build-win32-cross-tools script reported by Howard
622 kes Implement cross compiled bconsole
624 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
625 kes Write first cut of README.mingw32
626 kes Add back ua_label barcode fix from Rufolf Cejka.
627 kes Integrate the majority of the Mingw cross-tools submission
628 made by Howard Thomson. Everything compiles, with zlib, openssl,
629 and VSS turned off. Linking needs a pthreads library ...
631 kes Add 'Dir Status' button to the gnome console.
632 kes More work on migration.
633 kes Restore non-compatible base64 coding to permit compatibility.
634 kes Display heap stats in Storage daemon without debug level.
636 kes Integrate most of the MinGW changes -kes more to do.
638 kes Implement using pg_config for finding PostgreSQL files.
639 Fixes bug #600. Patch supplied by user.
640 kes Remove -t option from mktemp in mtx_changer.in and use
641 working directory. Fixes bug #578.
642 kes Update job start time after the any run before job so that
643 files created by the script are only backed up once. Fixes
645 kes Strip trailing newline only from filenames entered in
646 the restore command when reading a file. This permits
647 the user to enter filenames with trailing spaces. Fixes
648 bug #549. The user supplied a patch that I modified slightly.
649 kes Use the most recent time (st_mtime, st_ctime) in the dir
650 command in restore. This gives the user a better idea of what
651 the newest file really is. This fixes bug #574. The fix
652 was suggested by the user.
653 kes Implement a compatible version of base64. This permits external
654 programs to duplicate Bacula's base64 algorithm using standard
655 routines. This fixes bugs #296, and 565. Patch submitted by
657 ================= Note ========================
658 Previous Signatures stored in the database are no longer
659 compatible with this. The main downside is for Verify jobs,
660 and doing an InitCatalog run will fix the problem. Also, the
661 authentication between the deamons is changed, so all daemons
662 must be simultaneously upgraded.
663 ==============================================
664 If you don't like this fix, set:
665 const bool compatible = true;
667 const bool compatible = false;
670 kes Ensure that DB signature is never NULL.
671 kes Ensure that DB table names are not translated.
672 kes Fix scheduler to handle time skew (eg daylight savings).
673 kes Fix scheduler to use lock_jobs() to avoid most problems
674 with reload. Window is now milliseconds.
676 kes Apply patch from Christopher Hull
677 kes Allow multiple connections to database with different
679 kes Invalidate the scheduler when doing a reload. Fixes seg
680 fault, but still 60 second window.
681 kes Additional info in Reschedule message.
682 kes Use set_jcr_job_status() everywhere to prevent loss of
684 kes Display peer IP in FD if error from connecting DIR.
685 kes Don't increment file count for DIRBEGIN.
686 kes Replace illegal characters in Win32 filename by _.
687 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
688 kes Hash hard link filenames rather than linked list.
689 kes Fix for security failure in chdir on Win32.
690 kes Add CreateDirectoryA/W win32 API entry points.
691 kes Add /silent option to Win32 FD for Install/Remove service.
692 kes Always print Heap statistics in FD.
694 kes Remove the -f option from the chown in Makefile.in for more
696 kes Change setting the group in Makefile.in to use chgrp for
698 kes Implement a write_store and read_store to replace
699 dirstore in reserve.c
700 kes Implement a Bacula read/write lock for Python rather
701 than using the Python lock to avoid recursive problems.
702 kes Correct the uninstall directory names in filed/Makefile.in
703 as reported by a user.
705 kes Correct some problems with database creation (new tables).
706 kes Replace a bunch of old 0x%x by %p.
707 kes Get first cut of Migration with Job selection working.
709 kes Change store_bit() to store_bool() for the Spooling in
710 dird_conf.c -kes bug reported by Robert Nelson.
712 kes Correct Makefile bug found by Dan Langille.
714 kes Correct Makefile for Solaris /bin/sh
715 kes Correct mtx-changer.in for Solaris /bin/sh
716 kes Abort if a conf resource does not have a Name =
718 kes Change the name of the regex program to bregex.
719 kes Add the bwild program to the tools directory. It is similar
720 to the bregex program.
721 kes Implement create bregex.h and bregex.c in src/lib from the
722 Python regexp program.
723 kes Use the new bregex.c to implement Regex expressions on Win32.
725 kes More work on migration.
726 kes Implement wild program in tools directory for testing
727 wild-cards. Almost identical to the regex program.
728 kes Up port VSS single thread locking code.
729 kes Replace N_(..) by NT_(...) to inhibit translation of
731 kes Modify Makefile to change the permissions on Working Directory
732 to 770 if the directory is created.
733 kes Do not fail the Makefile if changing the permissions or
734 owner/group on WorkingDir fails.
735 kes Remove early selection of Scratch Volumes in the recycling
737 kes Correct the old recycling algorithm so that Scratch Volumes
738 are selected when looking for a Volume in the changer.
739 kes Correct a typo in the Verify SQL reported by Joe Park.
741 kes Remove automatic case folding on Windows FDs. You must
742 explictly use the 'Ignore Case = yes' option.
743 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
744 scratch volume in an Autochanger early in the 'recycling'
747 kes Make weof() and clrerror() methods of class DEVICE.
749 kes Tweak license to include Microsoft restrictions.
750 kes Move mysql.reconnect to after real_connect(). Thanks to
751 Frank Sweetser for the patch.
752 kes Disallow a backslash in a File = directive (Windows junk)
753 unless the string is quoted.
754 kes Apply Eric's patch to ua_label.c so that daemon protocol
756 kes Add NT_ definition for strings that should not be translated.
757 kes Apply NT_() to ua_label.c
758 kes Remove timed wait for VSS on Win2K3 as it is not yet
760 kes Correct bacula.in script to reference bacula-ctl-xx in the
761 sysconfig directory rather than the bin directory.
763 kes Fix a long standing bug in the bacula start/stop scripts.
764 kes Attempt to add the new bacula-ctl-* files to the rpm.
765 kes Switch to using typeof() for list traversing to avoid
766 as many FC5 g++ compiler warnings as possible.
768 kes Split the bacula start/start script into four files:
769 bacula -kes starts and stops calling other scripts
770 bacula-ctl-dir -kes starts/stops the director
771 bacula-ctl-fd -kes starts/stops the File daemon
772 bacula-ctl-sd -kes starts/stops the Storage daemon
774 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
775 kes Correct editing of JobId from int to int64 in fd_cmds.c
776 kes Eliminate FileSet name race with bash_spaces() and multiple
777 threads by bashing in a local.
778 kes Fix error return from 'use storage' to print a correct error
779 message rather than nothing.
780 kes Correct false re-read last block error message when two jobs
781 are simultaneously writing at the end of a tape.
782 kes Simplify exit conditions in the reserve.c code to avoid
783 possible non-release of reservation_lock().
784 kes Suffle lock order in reserve to avoid deadlock between
785 reservation lock and device mutex.
787 kes Initialize jcr mutex before first use. Thanks to Thorsten for
788 tracking this down for me !!!! as it broke the Win32 build.
790 kes Integrate addition of line count limitation to bsmtp -l from
791 Sebastian Stark <stark at tuebingen.mpg.de>
793 kes Implement regex test program in tools directory.
794 kes Attempt to fix time problem with bsmtp with foreign langs.
795 kes Add strip_trailing_newline() submitted by user.
796 kes Implement regex matching in migrate.c
798 kes Fix bug #537 to allow arbitrary time to mount a volume for
799 restore, if polling is turned on.
800 kes If dir_user or dir-group is specified in ./configure apply it to
801 the working-dir. Fixes bug #533.
802 kes If rescheduling a job cancel the previous incarnation with the SD.
803 Fixes bugs #566 and 557.
804 kes Fix bug #567 do_message() definition type conflict.
807 kes Add more jcr methods and make mutex and use_count private.
808 kes Create lock/unlock methods for jcr.
809 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
810 records to get to seek position.
811 kes Integrate patch from bug #561 to correct conio.c signal definitions.
812 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
813 terminates correctly by doing pthread_kill(). Do not destroy
814 SD cond wait variable between executions of the job. Use local
815 mutex for cond variable to avoid blocking jcr chain. Fix poor
816 use of jcr use count in jobq.c for restarted jobs.
817 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
818 lib/jcr.c -kes prevents locking the jcr chaing.
819 kes Apply patch from bug #564, which corrects listing volumes with
820 multiple autochangers. Apply same fix to next volume list.
821 kes Fix bug #562 where restore bootstrap file is not unique.
822 kes More details in implementing David's migration syntax proposal.
823 kes Save and restore dcr when swapping drives so that if we have
824 a write dcr it is not lost.
825 kes Use new routine lock_reservations() to lock the reservations
826 system, and call it while looking for a volume in askdir.c.
827 This could possibly fix bug #543.
828 kes Stop SD command loop if job is canceled.
831 kes Remove old code from findlib/create_file.c
832 kes Rename mac.c migrate.c
833 kes Add user friendly display of VolBytes in job report.
834 kes Rename target... to previous... to make it a bit easier to
836 kes Add selection type and selection pattern to Migration (idea
837 given by David Boyes).
840 kes The po files should now be current.
841 kes Fix new sql_use_result() code to properly release the
842 buffers in all cases.
843 kes Use the keyword ujobid to mean the unique job id; job or jobname
844 to mean the Job name given on the Name directive, and jobid to
845 be the numeric (non-unique) job id.
846 kes Allow listing by any of the above.
847 kes Add the user friendly job report code for reporting job elapsed time
848 and rates with suffexes from John Kodis <kodis at comcast.net>.
849 kes Add Priority and JobLevel as Python settable items.
850 kes Use TEMPORARY table creation where the table is created by
852 kes Add new code submitted by Eric for waiting on specific jobid.
853 kes Add ACL checking for the dot commands.
854 kes Fix restore of writable FIFOs.
855 kes Fix a bug in bpipe where the string was freed too early.
857 kes Modify the Python class examples to inherit object -kes new way
858 of defining classes. Patch from Felix Schwarz.
859 kes Implement jobuid to replace old usage of job in keywords as
860 suggested by Eric Bollengier.
861 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
862 wait (wait for all jobs to stop)
864 wait jobuid=unique id
866 kes Implement write variables for Python to set Priority (anytime), and
867 Job Level, only during JobInit event.
869 kes Fix the block listing bug pointed out by Arno.
870 kes Update the po files at Eric's request.
872 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
873 accept time qualifiers.
874 kes Make catalog respect ACL.
875 kes Add recycle count to Media record.
877 Changes to 1.39.6-beta1 24Feb04
879 kes Add Rudolf Cejka's new rc-chio-changer.
880 kes Implement pulling Volume from Scratch Pool if the
881 Volume is in the autochanger.
882 kes Implement additional command arguments for update Volume.
886 kes Back port changes to 1.38.5
887 kes Fix recycle SQL for StorageId.
888 kes Fix misplaced quote in mtx-changer script.
890 kes Note. Your database must be updated, or you must create
891 a new database. I have not yet incremented the database level.
892 kes Add Location table.
893 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
895 kes Implement create/get mac record in database for adding extended
896 Migration data to the job record.
897 kes Add new MAC table to update/make database scripts.
898 kes Return Storage name used when getting VolumeNames for a job.
899 kes Change bsr file keyword Storage to Device, which is more accurate.
900 kes Ensure that Mac records are pruned/purged.
901 kes Tweak SD tools to deal with changing media type.
902 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
903 kes Pass pointer to dcr pointer to acquire_device_for_read() so
904 that the subroutine can switch devices, and hence dcrs.
905 kes Modify the multiple MediaType read code to re-use the same
906 dcr when switching devices. This makes the code much more
908 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
909 from a table for restore.
910 kes Add Storage name to VolParams, but it really should be Device.
912 kes Add disk-changer to scripts directory + configure/Makefile
913 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
914 kes Implement store_bit scanner to replace store_yesno. Mostly done.
915 kes Implement new store_bool that stores in a bool.
916 kes Add true/false to yes/no conf directives.
917 kes Make first cut at changing appropriate store_yesno to store_bool.
918 kes Complete implementation of Pool storage devices.
919 kes Move starting clones to job.c
920 kes Move create_restore_bootstrap_file() to job.c
921 kes Make copy_storage() more general to be able to handle
923 kes Cleanup a lot of migration code for manual running, including
925 kes Move getting a scratch Volume into a subroutine.
926 kes Make all places a Volume that is added to a pool to
928 kes Fix bug in autochanger recycle code (improper edit 64 bit).
929 kes Fix segfault in restore command when no value specified.
930 kes Start adding code to handle multiple MediaTypes in restore.
931 kes Eliminate race condition in getting Volume name for
932 two drive autochanger.
933 kes More debug code in autochanger.
934 kes Add storage keyword to bootstrap file, add parsing.
935 kes Move slot in bsr file into Volume record as there will be
936 a different slot for each Volume.
939 kes Implement Pool storage overrides.
941 kes Implement first cut of Migration.
942 kes Implement mysql_use_result() from patch by Karl Hakimian.
943 This reduces significantly the memory consumption during
944 the restore tree building, and hence runs faster too.
945 kes Implement StorageId patch supplied by user (reggie) in bug
946 #536. This should permit Bacula to work correctly with two
948 kes Implement Job listing variations suggested by a user.
949 kes Move updating bootstrap code in backup.c to subroutine
950 update_bootstrap_file().
951 kes Add new job status elapsed time and bytes written user
952 friendly job report output patch sent by John Kodis
953 <kodis at comcast.ne>.
954 kes Implement a storage list in Pools.
955 kes Separate out setup_job() code from run_job().
956 kes Get migration working -kes lots of changes in mac.c in both
958 kes Apply patch from user (Eric Bollengier I think) that fixes a
959 DIR crash when no arguments are supplied to a dot command.
960 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
961 kes Fix command arg name->volume in label command of gnome-console.
962 kes Fix SD acquire.c to release correct DCR by explicitly testing
963 on the dcr address rather than trying to devine if it is a read
964 or write dcr. This failed in error conditions when the device was
968 kes Apply user supplied patch for more readable rate output
970 kes Continue implementing migration.
971 kes Implement support for removable filesystems in SD.
972 kes Ensure that btraceback scripts can be read by anyone.
973 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
974 kes Correct bug where canceling restore before the FD contacts
975 the SD causes the drive to be left in read mode.
976 kes Move ofline_or_rewind into DEVICE::close().
977 kes Eliminate close_device.
978 kes Convert several dev subroutines to methods (e.g. bsf,
980 kes Eliminate force_close_device().
981 kes Implement Device Type directive in Device resource that
982 can have values File, Tape, Fifo, DVD, or Prog.
983 kes Add has_cap() method to Device.
986 kes Add patch from bug #527 to allow RedHat user to specify
987 options/user/group for starting each daemon in
990 kes Add two new queries to query.sql provided by Arno. One
991 list volumes known to the Storage device, and the other
992 lists volumes possibly needing replacement (error, ...).
994 kes Add periodic (every 24 hours) garbage collection of memory
995 pool by releasing free buffers.
997 kes Correct bug counting sized (for display only) in smartall.c
998 kes Print FD mempool stats if debug > 0 rather than 5.
1000 kes Make db_lock() mutex error fail the job rather than abort
1001 Bacula. Canceling the job caused the mutex to fail.
1002 kes Correct bug in alist.c that re-allocated the list if the
1003 number of items goes to zero.
1004 kes Move the reservation system thread locking to the top level
1005 so that one job at a time tries all possible drives before
1007 kes Implement a reservation 'fail' message queue that is built
1008 and destroyed on each pass through the reservation system.
1009 These messages are displayed in a 'Jobs waiting to reserve
1010 a drive' list during a 'status storage='. Note, multiple
1011 messages will generally print for each JobId because they
1012 represent the different problems with either the same drive
1013 or different drives. If this output proves too confusing
1014 of voluminous, I will display it only when debug level 1
1015 or greater is enabled in the SD.
1017 kes Add enable/disable job=<job-name>. This command prevents
1018 the specified job from being scheduled. Even when disabled,
1019 the job can be manually started from the console.
1020 kes During 'update slots' clear all InChanger flags where the
1021 StorageId is zero (old Media records).
1023 Beta release 1.38.4:
1025 kes Fix autochanger code to strip leading spaces from returned
1026 slots number. Remove bc from chio-changer.
1027 kes Back port a bit of 1.39 crypto code to reduce diffs.
1028 kes Fix first call to autochanger that missed close()ing the
1029 drive. Put close() just before each run_program(). Fixes
1032 kes Add PoolId to Job record when updating it at job start time.
1034 kes Pull in more code from 1.39 so that there are fewer file
1035 differences (the new ua_dotcmds.c, base64.h, crypto.h
1036 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1037 util.c. Aside from ua_dotcmds.c these are mostly crypto
1039 kes Implement new method of walking the jcr chain. The
1040 incr/dec of the use_count is done within the walking
1041 routines. This should prevent a jcr from being freed
1042 from under the walk routines.
1047 kes Start implementing Verify list output.
1048 kes Move the suitable_drive flag to a better place to prevent
1049 premature termination of the reservation if all drives
1050 are busy -kes should fix Arno's diff/inc pool failures.
1052 kes Add mutex to single thread VSS code in Win32.
1054 kes Simplify code in askdir.c that waits for creating an appendable
1055 volume so that it can handle multiple returns from the wait
1057 kes Modify the wait code to permit multiple returns.
1058 kes Return a zero when "autochanger drives" is called and
1059 it is not an autochanger.
1060 kes Make rewind_dev() a method taking a DCR as an argument.
1061 This permits closing and reopening the drive if the
1062 rewind fails as happens if the drive was loaded while the
1063 file descriptor was open. This refreshes the file descriptor.
1064 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1065 if the device is open or not. This should eliminate
1067 kes Return error if reserve cannot find at least one suitable device.
1068 kes Make wait_for_sysop() return correct state information.
1069 kes Fix Win32 state file problem. write was not using compat
1070 code. This should fix bug #500.
1072 kes Modify gui on command to set only GUI mode and not batch.
1073 kes Modify .messages command to always print messages regardless
1075 kes If GUI mode is on, suppress automatic printing of
1077 kes Delete old bnet packet code.
1078 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1079 wx-console. -kes not implemented because bconsole must be updated.
1080 kes Modify restore command in wx-console to set gui on and to use
1081 only .messages instead of messages. Hopefully this fixes bug
1083 kes Fix seg fault in exit of acquire when canceling a job --
1084 reported by Wolfgang Denk
1085 kes Pull in latest reservation system changes from 1.38
1086 kes Make .messages command always print messages regardless
1087 of the automessages flag.
1089 kes Fix seg fault if user labels a drive directory bug #513
1090 kes Remove quotes around Version as it breaks things.
1092 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1093 kes Apply sparse code fix for raw drives and fifos. Bug 506
1094 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1096 kes Correct reservation system to do a last ditch try
1097 for any mounted volume, then anyone anywhere.
1098 kes Add quotes around table Version because of
1099 error in MySQL 4.1.15 -kes bug report submitted.
1100 kes Correct some minor problems with btape in the fill
1102 kes Updates to ssh-tunnel from Joshua Kugler.
1103 kes Added a report.pl program from Jonas Bjorklund.
1104 kes Simplify the O_NONBLOCK open() code for tape drives,
1105 and always open nonblocking.
1106 kes Do not wait for open() if EIO returned (shouldn't happen).
1107 kes Eliminate 3 argument to tape open().
1108 kes Correct the slot # edited in the 3995 Bad autochanger unload
1110 kes With -S on bscan (show progress) do not divide by zero.
1112 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1113 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1114 kes Remove unused code in wait_for_device.
1115 kes Make wait_for_device() always return after 60 seconds of wait.
1119 kes Add stubs for non-crypto build.
1121 kes Use localhost if no network configured
1123 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1124 kes Remove debug print.
1125 kes Add bail_out in error during state file reading.
1127 kes Merge changes made to 1.38.3 into HEAD
1128 kes Add stubs for pygtk-console code
1129 kes Create Makefile.in for pygtk-console code
1131 kes Merge updates into 1.38 branch
1132 kes Update specs to include mysql4 define.
1133 kes Fix when attributes are sent, must be after binit().
1134 kes Stop read_record() if status not ok in second loop.
1135 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1136 and partial records in read_record(). This allows bscan
1137 to get FileIndex at EOT correct.
1138 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1140 kes Fix Win32 built to work with new crypto code.
1141 kes Apply patch supplied by user (slightly modified) to fix
1142 correct detection of holes in block devices and FIFOs.
1144 kes Apply patch supplied by user (slightly modified)
1145 to fix SD hang with multiple pools and bad client
1146 IP. Fixes bug # 508.
1148 kes Add nagios plugin to the examples directory. Submitted by
1150 kes Remove warning message about multiple saves of hardlinked files
1151 from find_one.c as it can generate too many warning messages.
1152 kes Modify most restore error messages to be queued so that they
1153 appear at the end of the job rather than mixted with the restore
1154 listing where they could be "lost".
1156 kes Reset timeout values before select() per patch from
1157 Frank Sweetser for problems with non-blocking sockets.
1158 kes Unlink the state file if either reading or writing it gets
1159 errors. Hopefully this will fix Win32 exit problems.
1160 kes Add sanity check in append.c to ensure that dcr is not NULL.
1161 This can happen if multiple drive autochanger SCSI control
1162 channel and drive indicies do not correspond.
1164 kes Get next volume from Scratch pool before creating a volume.
1165 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1166 kes Remove argument from create_bacula_database for SQLite as it
1168 kes Add back index code so that two drive autochangers can get
1170 kes Change a bunch of debug levels to aid debugging autochangers.
1171 kes Fix reservation so that mutexes are properly applied.
1172 kes Rework reservation algorithm so that two drives can be used
1175 kes Landon merged his data encription changes into the HEAD
1176 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1177 If this patch is applied, the number of days can be specified with
1178 "list nextvol days=xx"
1180 "status dir days=xx"
1181 My use case is to be able to preview the next scheduled job (and the
1182 next tape to be used) on fridays if there are no scheduled jobs during
1186 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1187 kes Fix malformatted bnet error message that caused seg fault
1189 kes Applied user patch to improve README.vc8 in src/win32.
1191 kes Add Migrate, Copy, Archive Job types (some where there)
1192 kes Correct some more editing of JobId's (for 64 bit compatibility).
1193 kes Ensure that StorageId is stored in Media record when ever possible.
1194 kes Add Migration Job to Job.
1195 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1196 Next Pool to Pool resource.
1197 kes Add more code to mac.c (migration archive copy).
1198 kes Change Start Storage daemon job to require read and write storage
1200 kes Pass read storage data to SD as well as write storage data.
1201 kes Remove old code from winservice.cpp
1202 kes Break on error in scan.
1203 kes Fix typo in signal.c
1204 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1205 kes Cleanup how find_device() works.
1206 kes Add read output to Status in SD.
1209 kes Add red-black btree routines
1211 kes Remove abs() in bfile.c so that it compiles on Solaris.
1214 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1215 kes Fix bnet-server bug found on OpenBSD. Bug #486
1216 kes Fix cancel failure bug. Bug #481
1217 kes Fix failure when Pool name has spaces. Bug #487
1218 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1219 kes Fix a couple of free()s in src/filed/acl.c
1220 kes Fix memory overrun in bfile.c in building OS X resource
1221 fork filename. Bug #489
1222 kes Add Pool name to SD status output.
1224 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1225 kes Make sure to set storage before trying to set drive.
1226 kes Add bacula_mail_summary.sh to examples directory. It makes
1227 a single email summary of any number of jobs. Submitted
1229 kes Make sure when we do a mount to unblock the device even
1230 if the drive could not be opened.
1232 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1233 and correct a few minor problems to make it build on Linux.
1235 kes Remove delete of CVS from all Makefiles
1236 kes Fix seg fault when clicking on Add button in wx-console
1237 restore panel. Bug #470.
1238 kes Fix copyright date and URL typo -kes bug #468.
1239 kes Change autostart install for FreeBSD to look for rc.conf
1240 rather than rc.local as suggested fix for bug #466.
1241 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1242 grant on status. Bug #465
1243 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1244 update script. Bug #464
1245 kes Tweak #ifdefing a bit in new Win32 stream code.
1246 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1247 kes Add documentation of performance #defines
projects / bacula / bacula / blob