1 Technical notes on version 1.39
5 kes All code added back. Fixed block.c read/write to loop only 3
6 times. This apparently keeps the OS from crashing (at least
8 kes The kernel bug still persists. Backup something then immediately
9 do a bscan on the same tape, and the kernel will crash.
10 kes Simplifed tape open(). It no longer uses nonblocking mode, which
11 means that opening with no tape loaded will probably take at least
12 6 minutes before an error is reported.
13 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
14 when doing set_os_device_parameters.
15 kes Report open error in mount.c
16 kes Remove all .exe files from the installer directory on make clean.
18 kes Start adding back removed code.
19 kes Back out a number of changes because backups to tape crash my
21 kes Remove the inetd code from the File daemon.
23 kes Add -c option to pg_dump so that it initializes tables when
25 kes Fix FirstWritten time on Volume to be obtained from SD so that
26 it is the actual time the volume was first written.
27 kes Minor Makefile changes.
28 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
29 ebl Add yes keyword to prune/purge command
31 kes Correct a test in block.c that prevented restore of a DVD from
32 looking at the last part in the spool directory.
33 kes Make some error messages clearer mostly by using the word DVD
34 in the message. Improve infor message in read_record for DVDs.
35 kes Remove DVD kludges in dircmd.c label/relabel.
36 kes Move the dvd relabel code from dircmd.c into
37 write_new_volume_label_to_dvd() adding a relabel argument.
38 kes Rewrite the truncate_dvd() code to be much simpler and
39 more logical. First blow away any spool part, then create a
40 new empty part and write to the DVD.
41 kes Rewrite the can_write_on_non_blank_dvd() code making it
42 only ensure that no valid data is on the DVD -- i.e. it
45 kes Minor Makefile fixes.
46 kes Put attach_dcr_to_dev in a subroutine.
47 kes Make attaching/detaching to/from a device use a flag and
48 only detach if actually attached.
49 kes Add dvd-simulator.in to scripts directory and add to configure.
50 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
51 This could be a cause of a number of drive reservation problems.
52 Note, this code is now in attach_dcr_to_dev().
53 kes Suppress doing Volume updates if it is a system job. This should
54 prevent the DVD label blocking.
55 kes Clear the freespace ok flag in a couple of strategic places.
57 kes Put removing zero sized spool part file in subroutine and
58 call from release_device().
59 kes Add Richard's patch for relabel to dircmd.c, but save and restore
61 kes Rework a lot of subroutines in dev.c to take dcr as an
62 argument. This is done to eliminate the usage of attached_dcrs
64 kes Change truncated_dvd to blank_dvd, which seems more suitable.
65 kes Apply most of Richard Mortimer's truncate patch.
66 kes Create lseek() method for DEVICE that takes dcr as an
67 argument. This is to eliminate the use of attached_dcrs in
68 lseek(). The calls to lseek_dev() must still be changed.
70 kes Apply Richard Mortimer's patches for printing an error
71 message in btape when a DVD is used, and to initialize traceback.
72 kes Added error message to btape when trying to access a file.
73 kes Move prototype of update_slots() to protos.h.
75 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
76 and FDJobStatus to the Director Python variables.
77 kes Make sure valid argument passed to str_to_utime() where Arno
79 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
80 I.e. part of two different patches.
82 kes Modify disk changer to simulate some of the error conditions
84 kes Make sure the close() call in the SD tools is just before the
86 kes Implement dir_get_volume_info() in bls using the patch from
87 Richard Mortimer but call find_num_dvd_parts().
88 kes Implement find_num_dvd_parts() that mounts and scans a DVD
90 kes Move the omode code in open_dvd() up so that the cannot
91 write on blank disk can check can be bypassed for read mode.
94 kes Disable normal data spooling for DVD writing which uses
95 a different spooling mechanism.
96 kes Apply patch from Richard Mortimer to ensure that the number
97 of DVD parts is correctly updated.
99 Version 1.39.22 beta released:
101 kes Fix logic error in handling error return from mtx-changer
103 kes Make status from SD aware of -1 (unknown) Slot status.
104 kes At Eric's suggestion make both the "slots" and "drive" commands
105 to the Storage daemon work even if the drive is busy.
106 kes Make two separate Win32 menu links for starting bconsole and
107 wx-console in winbacula.nsi
108 kes Apply DVD part_spooled patch from Richard Mortimer
109 richm@oldelvet.org.uk
110 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
111 rbn Fixed problems migrating settings from previous releases in
112 Win32 installer. Add Readme.txt with an option to show it on
113 the installer Finish page.
115 kes Use get_catalog_resource() to open catalog database
116 to ensure that ACLs are respected and that user is
117 correctly prompted for database.
118 kes Integrate multiple console/director patch from
119 Carsten Paeth calle@calle.in-berlin.de
120 ebl Add character substitution in Job/JobDefs WriteBootStrap.
121 You can use now 'WriteBootStrap = "/path/%c_%n.bsr"'
122 kes Apply patch supplied in bug #656 to pass priority field
123 in the run dialog to the Director in gnome console
124 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
125 this will fix bug #627 where Bacula eventually gets
126 confused about what Volume it wants.
127 kes Add a new close_part() class in the SD to save the device
128 state around open/close_part/open for DVD writing. This
129 should fix the num_dvd_parts getting zeroed as reported by
131 kes Apply patch from Richard Mortimer that correct edit code
132 for debug output of st_size.
133 ebl Add support of encrypted data stream to bscan.
134 display data_len instead of data content (may be binary)
136 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
137 bcopy. Fixes bug #669 reported by Eric.
138 kes Fix incorrect number of arguments in SQL statement in
139 sql_get.c as reported by Eric.
141 kes Update examples directory.
142 kes Remove unused variable in winservice.cpp
143 kes Make Win32 make command build installer.
145 kes Correct dvd code that breaks tape labeling.
146 kes Implement Enabled on update slots.
148 kes When doing a label, pass the VolBytes back to the Director,
149 which puts it in the catalog.
150 kes Print an error message if the user attempts to prune an
152 kes Need to start using %ld when sscanfing 32 bit values.
154 kes Correct the counting of VolCatBytes for DVDs.
155 kes Add code to mount.c to require that VolCatBytes corresponds to
156 what is actually found when doing an append.
157 kes Update freespace only after writing on the DVD.
158 kes Remove code that blows away the current part in the spool file.
160 kes Apply new dvd-handler patch from Richard Mortimer.
161 kes Tweak so that debug level 20 shows only DVD commands.
162 kes Correct spooled_part flag in dev.c close() so that it is cleared
163 when the spool file is deleted or does not exist.
164 kes Print part number in read_records when eof hit (restore).
166 -es Make find with no args in tree restore return error rather than
167 stopping the selection. Fixes bug #665
168 kes Rework DVD writing to ensure that the last part is written
169 on open_next_part when dealing with a spool file.
170 kes Correct the lseek_dev() routine to handle end point correctly
171 (bug introduced by me).
172 kes Allow part number to exceed num_dvd_parts in lseek_dev().
174 kes Apply dvd-handler patch from Richard Mortimer.
175 kes Apply dvd error check patch from Richard Mortimer.
176 kes Apply bpipe race patch from Richard Mortimer.
177 kes Rework how DVD labels are handled and set append only
178 when part > num_dvd_parts.
180 kes Rework many features of DVD writing and reading. Added many error
181 messages. Most importantly changed part to represent the current
182 part number base zero. This makes current DVD writing incompatible
183 with previous version.
185 kes Add host:port to connect failure messages to FD and SD from Dir.
186 kes Add WhereACL to console ACL list. If nothing is specified, only
187 the default is permitted for restore. Otherwise, *all* allows any
188 path, or you can specify permitted paths. This should allow control
189 over where users can restore files. This is untested.
190 kes Modified message to add a ? (as in loaded?) when querying the autochanger
191 for what Slot is loaded.
192 kes Fixed the use of Slot, so that is more correctly maintained, thus
193 eliminating unneeded duplicate calls to determine what Slot is loaded.
195 kes Install man pages with 'make install'
196 kes wx-console crashes because of differences between Bacula and wxWidgets
197 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
199 kes correct improper indenting in wx-console/console_conf.c
200 kes update wx-console header copyrights
201 kes Fix bug #658 where wx-console mangles file/directory names containing
204 kes Add Media.Enabled flag to client backups for dotcmds.c
205 kes Enforce Media.Enabled=1 for a current restore to work.
206 kes Require restore case 3 to have sqlquery permission to work.
207 kes Remove obsolete del_MAC sql command.
208 kes Ensure that bscan creates Volumes with Enabled=1.
210 Version 1.39.20 beta released:
212 kes Correct missing Client table reference in SQL pointed out by
215 kes Fix Win32 build (new entrypoint, start baculafd).
217 kes Add -n option to bconsole to turn off conio.
218 kes Print JobIds to be migrated in Job Report.
219 kes Add additional user supplied notes to the messages part of
220 bacula-dir.conf concerning multiple email addresses.
221 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
222 kes Add more recent Feature requests to Projects file.
224 kes Apply Maritn's fix to src/win32/Makefile.
225 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
226 kes Implement pruning for Migration and migrated jobs.
227 kes Implement PoolOccupancy migration.
228 kes Implement PoolTime migration.
230 kes If doing a mount, look for a slot, and if specified pass it to
231 the SD so that it can load the autochanger.
232 kes Return DVD=1 flag if a label command is done to a DVD. This
233 permits setting VolParts to 1.
234 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
235 rework ua_label code based on DVD media type to use DVD flag returned.
237 kes Eliminate some compile warnings in dird_conf.c
238 kes Format the bytes field in the terminated jobs part of the status
239 command for the three daemons with suffixes to reduce print size
240 of backup bytes. Suggested by a user.
241 kes When not descending into a directory, print the File= name that
242 triggered it -- makes why not descending a bit clearer.
243 kes Do not unload autochanger when doing a list command -- basic code
244 from Eric Bollengier.
246 kes Fix bug #462 incorrect error message printed when client script called
247 from File= was not found.
248 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
249 do a rewind on Solaris when no tape is in the drive (Solaris does not
250 have the detailed errno found on Linux). Added Solaris specific code.
251 Note, this may apply to other OSes as well.
253 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
254 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
255 fix bug 648 - update sqlite script patches, lock out gnome2console
256 builds for platforms with gtk+ < 2.4.
257 Updated build_rpm.sh - add remote source directory, add switch for
258 signing, refine file names.
259 Updated spec file again for Mandriva build as they have this curious
260 custom of silently converting all manpages to bzip2 format just before
261 the final packaging step.
263 rbn Fixed the Windows Makefiles so that they won't accidentally try and
264 pickup binaries for the Unix build. This allows both the Unix
265 build and the Windows build to be built in the same tree without
266 interfering with each other.
267 rbn Fixed error handling and cleaned up mtx-changer.cmd.
268 rbn Added the rest of the database scripts. These are installed but are
269 not yet edited for variable replacement.
270 rbn Broke out the cats functionality from bacula.dll and put into new
271 separate dlls for each database type. At installation time the
272 correct one is copied to bacula_cats.dll.
273 rbn Eliminate the need to install the mysql.dll on client only builds.
274 rbn Moved dird/sql_cmds.c into the cats directory so all the database
275 specific #ifdefs were in the cats directory.
276 rbn Added a new sql_cmds.h with all the declarations for the variables
277 exported from sql_cmds.c.
278 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
279 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
281 kes Correct improperly formatted list command output reported by Dan.
283 kes Correct despool time calculation.
285 kes Remove previous changes to compat.cpp as they create problems.
286 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
287 kes Attempt to fix problems with the msg_queue crashing on Solaris
288 when Bacula is terminating, but problems remain.
289 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
290 name editing problems with too many \\?\es.
291 kes Fix some Bacula source code style problems in compat.cpp.
292 kes Add debug code to compat.cpp and convert non-Bacula debug code
295 kes Change the name of the technical notes file from kes-1.39 to
296 technotes-1.39. Prefix my messages with 'kes '.
297 kes Allow dequeue_messages() to be called twice. Should fix bug
299 kes Add Job type to bscan Job information output.
301 kes Update copyright date in program files, and for the most part
303 kes Implement %q in bsnprintf.c apparently I forgot it.
305 kes Make disk-changer sed command compatible with FreeBSD.
306 kes Make a first cut at a ReleaseNotes and ChangeLog for a
308 kes Make make clean descend into the src/win32 directory.
309 kes Fix some #ifdefing so that Solaris and FreeBSD compile
310 sys/stat.h was turned off.
311 kes Use suffix editing for new transfer rate messages.
312 kes Attempt to come up with a workaround which seems to be an OS
313 bug where write() returns EBUSY. IMO this should not happen.
314 It triggered in truncatebug test. The workaround retries using
316 kes Eliminate a strerror() call in a class method that failed with
318 kes Use rm -rf rather than rmdir to delete the src/win32/release
319 directory during make clean.
321 kes Make bscan ignore ACL streams.
322 kes Update projects files with new Feature Requests.
323 kes Generate current English and French manuals and upload
325 kes Update the home page to include the new British/French flags to
326 switch between translations. Work done by Alexandre Baron.
327 kes Make disk-changer script print an error message if the changer
328 directory is not defined.
329 kes Create a generic DB routine for getting an int (32/64 bit) from
331 kes Add more migration code.
332 kes Add a few more files to .cvsignore here and there.
333 kes Minor fixes for SD write rate and despooling rate.
334 kes Turn off new test code in src/console.c
338 kes Incremented the version number to signify that all of Robert's code
339 for Win32 that was in the branch is now integrated into the HEAD,
340 and that Eric has submitted code that we hope will provide limited
341 backward compatibility with 1.38 file daemons (more testing to be
343 kes I rationalized a few of the names of the variables (mainly jcr names)
344 that are used during migration as keeping three different jcrs at the
345 same time clear in ones head is not easy.
349 eb Tweak new runscript feature to work with 1.38.x FDs.
350 eb Correct crypto.c to fix segfault when restoring an encrypted stream
351 on fd which don't use rsa keys.
352 eb Add yes/no English keywords on localized yes/no questions.
354 kes Several important commits from Robert Nelson for code cleanup and
356 kes Modify console.c so that when conio is enabled, it converts \n to
357 \n\r before outputting to the console. Hopefully this will fix
358 the problems with expect in Perl that Eric saw.
360 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
362 kes Add Comment field to llist of a volume.
363 kes Allow true/false in some yes/no questions.
364 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
365 kes Remove a few /n's when scanning commands from another daemon. This
366 permits adding additional fields later.
367 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
368 kes Update README.mingw
370 kes Tweak authentication to work with 1.38.x FDs.
371 kes Tweak catalog make scripts.
372 kes Fix catalog upgrade scripts so that they work.
373 kes Correct despooling debug code to eliminate race condition.
375 kes Add additional fields as specified by Arno to LocationLog.
376 kes Add comment field to the Media record.
377 kes Add Time field to the Log record.
378 kes Correct migration SQL (thanks to Bill Moran) so that it
379 runs with PostgreSQL also.
380 kes Add spooling/despooling info in status output of SD.
382 kes Spend a lot of time integrating mkcdrec with the rescue disk.
383 kes Add VOLMGMT message class for volume management messages (none yet).
384 kes Add CATALOG as a destination. It goes into the LOG table.
385 kes Implement the Log table in the DB.
386 kes Implement the Location Log table in the DB (for user use).
387 kes At Eric's request add a run_scripts() just after blast_data in
390 kes Add Enabled column to Location, correct some typos in DB schemas.
391 kes Correct bug I introduced into RunScripts enum.
392 kes Add log table to Catalog
393 kes Purge original job migrated if the migration terminates normally.
394 kes Cleanup purging of files/jobs so that it is done only in a
396 kes Add new VOLMGMT message class.
397 kes Add Catalog message destination (user conf code remains to be written).
399 kes Modify read_record and friends to properly deal with migration
401 kes Update debug code in read_record.
403 ======================= Warning ==========================
404 Separate read and write storage in Jobs in the Director. This
405 is a major rewrite of some of the low level code and hence has
406 a high probability of introducing bugs.
407 ==========================================================
409 kes Move the job init code up to *before* the job is put into
410 the job queue (resource allocation queue). This permits the
411 job to establish whether it will read or write or do both.
412 kes Add name() methods to all the resource classes.
413 kes Implement separate read and write storage resource
414 allocation/deallocation in jobq.c
416 ======================= Warning ==========================
417 Implemented new method of getting the default Storage from the Media
418 record rather than from the MediaType for restore. As a fall
419 back, if no Storage is defined, use the MediaType. This
420 eliminates most all prompts if there are multiple MediaTypes
421 used. This is an important and fundamental change.
422 ==========================================================
424 kes Add more detail (Storage, Device) to list of volumes printed
426 kes More code in migrate. In particular start multiple jobs if
428 kes Probably overkill, but ensure that the bsr is unique even within a
430 kes Rework bsys.c drop() so that it now should work as expected.
431 kes Update a bunch of old copyrights -kes particularly in .h files.
432 kes Remove src/lib/bshm.c/h
436 ======================= Warning ==========================
437 All hash codes in the database are now kept in world
438 compatible base64 format (no = filling). This means that
439 all FileSets will be updated and if you are running
440 verify jobs, you must do an InitCatalog.
441 Authentication uses the new algorithm, but should be
442 backward compatible with 1.38.x
443 ===========================================================
445 kes Modify the authentication routines so that the 1.39.15 Director
446 always runs with the compatible binary to base64 code (same as
447 the rest of the world). It will however detect if an SD or
448 FD is running the old code and if that is the case, will use
449 the old algorithm for authentication. However, all consoles must
450 use the compatible algorithm, and all data entered into the database
451 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
452 use the compatible algorithm.
453 kes Rename the cram_md5 routine names to be slightly more appropriate
454 to what they are doing (challenge and respond).
455 kes Robert committed his #ifdef and header cleanup.
457 kes Fix a compiler warning in files/backup.c
458 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
460 kes Robert committed his low impact changes.
461 kes I removed a size_t from the jcr.h definition.
462 kes Update the tape regression scripts (still to be tested).
463 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
464 kes Require done or quit to exit from in memory tree restore.
466 kes Write install/uninstall of new manpages. There are now a
467 pile of man pages. Some of which need a lot of work.
469 ======================= Warning ==========================
470 The --mandir ./configure option now points to the top level
471 man directory. The man files will be installed under
472 mandir/man8 and mandir/man1 as appropriate.
473 ==========================================================
475 kes Add complete text of GPL to LICENSE.
476 kes Implement job report that indicates where Storage and Pool
477 came from -kes with overrides and Pool storage and NextPool,
478 it is all very complicated.
479 kes Create a few common subroutines for backup.c and migrate.c
480 kes Eliminate warning messages from tray-monitor.c
482 kes Apply fix for scheduler for missing unlock_jobs().
483 kes Clean out autoconf caches before rebuilding configure
484 kes Fix the FreeBSD pthreads lib define updated by Dan.
485 kes Add missing semicolon in src/console/console.c
486 kes Add Robert's enhanced version of build-win32-cross-tools
487 as well as his patch file.
488 kes Note, the new gcc options are likely to break building of
489 wx-console or the tray-monitor ...
491 kes Implement Robert's suggestion to suppress printing compile lines.
492 kes Detect GCC correctly (I hope)
493 kes If using GCC (actually g++) add the following compiler flags
494 -fno-strict-aliasing -fno-exceptions -fno-rtti
496 ===================== Warning =============================
497 Turn on new bsnprintf() code. This could cause print output
499 ===========================================================
501 kes Fix crypto when not using openssl. I previously overlooked this.
502 kes Eliminate crypto type punning problems by eliminating void * and
503 using uint8_t * instead.
504 kes Harden authentication failure in FD by single threading errors
505 and forcing a 6 second wait.
507 ===================== Warning =============================
508 Removed "Accept Any Volume" directive.
509 ===========================================================
511 kes Major cleanup and simplification of regress using shell functions
512 (more tests to be converted to new format)
513 kes Add detection of 64 bit Irix as indicated by user.
514 kes Increment catalog database id from 9 to 10.
515 kes Add a few of the new database fields to the various C++
517 kes Implement code to fill in the most important new fields (e.g.
519 kes Ensure that most of the new fields are in create/get/insert/update.
520 More work to be done.
522 kes Update some very old licenses in src/cats.
523 kes Modify the database format for handling Migration jobs:
524 Add PriorJobId, RealEndTime to Job table
526 Remove Stripe from JobMedia record (not used, wasting space)
527 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
528 Add Cost to Location table.
529 kes Delete mac_record subroutines.
530 kes Add new table values to create/update/get routines as appropriate.
531 kes Update the update_tables and make_tables scripts.
532 kes Make a first cut in using a union where multiple pointers (actually
533 pointers to pointers) are stored.
534 kes Make some changes to base64.c suggested by Robert and others and add
535 a small amount of documentation.
536 kes Add some changes suggested by Peter for Solaris (bregex...)
537 kes Make runscript.h always built because it needs to be pulled into
538 more places. In particular its RES was left out of a union.
539 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
540 This makes it slightly easier to detect uninitialized variables.
542 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
543 sometimes creates install problems.
544 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
545 Nelson's code. More to do.
546 kes Convert a few store_bit to store_bool in filed_conf.c.
547 kes DVD tweak to block.c as supplied by Uwe Muessel.
549 kes Modify configure.in to check for typeof().
550 kes In findlib/attribs.c use typeof instead of templates if possible.
552 kes Implement partial error messages for src/filed/acl.c
553 kes Fix return code to fail when doing update barcodes and
554 Pool resource is not found. This previously caused Volumes
555 to be labeled as cleaning tapes.
556 kes Small updates to projects.
558 kes Add Eric Bollengier patch for new RunScript directive. It breaks
559 compatibility between dird and fd.
561 kes Prevent DVD code from rewriting label if the device cannot be
563 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
564 fix Debian build bug.
565 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
566 kes Integrate manpages contributed by Jose Luis.
567 kes Update projects file.
568 kes Add manpages Makefile.in to configure.in
569 kes Remove installation of bacula.8 in scripts directory.
571 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
573 O_NOATIME is a open() flag which makes it possible to read a file without
574 updating the inode atime (and also without the inode ctime update which
575 happens if you try to set the atime back to its previous value). It also
576 prevents a race condition when two programs are reading the same file, but
577 only one does not want to change the atime. It's most useful for backup
578 programs and file integrity checkers (and bacula can fit on both
581 Recent versions of the Linux kernel and glibc have support for it (the
582 glibc support being mostly copying the O_NOATIME definition to
583 bits/fcntl.h). If there's no support for it on the kernel, trying to use
584 it does nothing (since the kernel ignores unknown flags).
586 If the kernel has support for it, trying to use it either works, fails
587 silently (mostly in remote filesystems), or returns errno=EPERM (if you
588 are not either the owner of the file or root). A simple way to prevent the
589 failure is to open the file without the flag and set it later with
590 fcntl(F_SETFL), ignoring any EPERM errors.
591 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
592 of restarted jobs to complete (due to a destroyed pthreads conditional
593 variable used by the message thread).
594 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
596 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
597 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
598 colons in query.sql file.
599 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
600 not to create orphans.
601 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
602 in restore long listing.
603 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
604 of incorrect MarkedId.
605 kes Apply patch from adioso bug #616 to correct text in manual (replace
606 Director with File daemon).
607 kes Rework a few of the zlib changes so that they build properly.
610 kes Move DIR "run" command to SD before starting the message thread
611 as suggested by Cristopher Hull to avoid a race deadlock from
612 two threads using the bsock structure.
613 kes Modify LICENSE to correct some problems pointed out by Debian.
615 kes Correct EOF with no \n lex.c problem.
616 kes Tweak compat.h compat.cpp and merge with apcupsd
617 kes Add additional INFO messages if autochanger cannot be used.
620 kes Simplify Win32 Makefile
621 kes Correct count of buffers/bytes used by smartall.c
622 kes Updated compat.h after porting apcupsd to MinGW.
624 kes Work on getting wx-console building on MinGW. wxWidgets now builds
625 started adding Makefile ...
626 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
628 kes Reloading a bad configuration file doesn't kill director any more.
629 Thanks to fix from Eric Bollengier.
631 kes Fix problem of accents with new Win32 code.
632 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
633 works in the MinGW build with the exception that there
634 is a problem with accented characters -kes i.e. there is
635 some mapping problem with wide characters.
636 kes The code no longer compiles with Microsoft VC++.
638 kes Start implementing Christopher's St.Bernard code.
639 kes Add Christopher's mods for opening files.
640 kes Strip \r \n from Win32 error messages (Christopher)
641 kes Add more info about Win32 system if unknown (Christopher)
642 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
643 kes Fix a number of incorrect strings marked for translation, when
644 they should not be (e.g. commands).
645 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
646 Patches supplied by user in bugs #608 and #599.
647 kes Use most recent of st_ctime and st_mtime in restore tree DIR
648 listing. This fixes some problems with Win32 printing incorrect
650 kes Correct the clock shift comm time calculation between the DIR
651 and the FD. It was added rather than subtracted.
652 kes Strip all backslashes in filenames to be restored on Win32
653 machines -kes the names should all be in Unix format, and if
654 there are any backslashes it is most likely due to an improper
655 FileSet definition, and the files will not otherwise be
657 kes Remove lib/regex.c (replaced by bregex.c).
658 kes Delete src/win32/License.txt
659 kes Modify installer to install LICENSE
661 kes Fix bug in build-win32-cross-tools script reported by Howard
662 kes Implement cross compiled bconsole
664 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
665 kes Write first cut of README.mingw32
666 kes Add back ua_label barcode fix from Rufolf Cejka.
667 kes Integrate the majority of the Mingw cross-tools submission
668 made by Howard Thomson. Everything compiles, with zlib, openssl,
669 and VSS turned off. Linking needs a pthreads library ...
671 kes Add 'Dir Status' button to the gnome console.
672 kes More work on migration.
673 kes Restore non-compatible base64 coding to permit compatibility.
674 kes Display heap stats in Storage daemon without debug level.
676 kes Integrate most of the MinGW changes -kes more to do.
678 kes Implement using pg_config for finding PostgreSQL files.
679 Fixes bug #600. Patch supplied by user.
680 kes Remove -t option from mktemp in mtx_changer.in and use
681 working directory. Fixes bug #578.
682 kes Update job start time after the any run before job so that
683 files created by the script are only backed up once. Fixes
685 kes Strip trailing newline only from filenames entered in
686 the restore command when reading a file. This permits
687 the user to enter filenames with trailing spaces. Fixes
688 bug #549. The user supplied a patch that I modified slightly.
689 kes Use the most recent time (st_mtime, st_ctime) in the dir
690 command in restore. This gives the user a better idea of what
691 the newest file really is. This fixes bug #574. The fix
692 was suggested by the user.
693 kes Implement a compatible version of base64. This permits external
694 programs to duplicate Bacula's base64 algorithm using standard
695 routines. This fixes bugs #296, and 565. Patch submitted by
697 ================= Note ========================
698 Previous Signatures stored in the database are no longer
699 compatible with this. The main downside is for Verify jobs,
700 and doing an InitCatalog run will fix the problem. Also, the
701 authentication between the deamons is changed, so all daemons
702 must be simultaneously upgraded.
703 ==============================================
704 If you don't like this fix, set:
705 const bool compatible = true;
707 const bool compatible = false;
710 kes Ensure that DB signature is never NULL.
711 kes Ensure that DB table names are not translated.
712 kes Fix scheduler to handle time skew (eg daylight savings).
713 kes Fix scheduler to use lock_jobs() to avoid most problems
714 with reload. Window is now milliseconds.
716 kes Apply patch from Christopher Hull
717 kes Allow multiple connections to database with different
719 kes Invalidate the scheduler when doing a reload. Fixes seg
720 fault, but still 60 second window.
721 kes Additional info in Reschedule message.
722 kes Use set_jcr_job_status() everywhere to prevent loss of
724 kes Display peer IP in FD if error from connecting DIR.
725 kes Don't increment file count for DIRBEGIN.
726 kes Replace illegal characters in Win32 filename by _.
727 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
728 kes Hash hard link filenames rather than linked list.
729 kes Fix for security failure in chdir on Win32.
730 kes Add CreateDirectoryA/W win32 API entry points.
731 kes Add /silent option to Win32 FD for Install/Remove service.
732 kes Always print Heap statistics in FD.
734 kes Remove the -f option from the chown in Makefile.in for more
736 kes Change setting the group in Makefile.in to use chgrp for
738 kes Implement a write_store and read_store to replace
739 dirstore in reserve.c
740 kes Implement a Bacula read/write lock for Python rather
741 than using the Python lock to avoid recursive problems.
742 kes Correct the uninstall directory names in filed/Makefile.in
743 as reported by a user.
745 kes Correct some problems with database creation (new tables).
746 kes Replace a bunch of old 0x%x by %p.
747 kes Get first cut of Migration with Job selection working.
749 kes Change store_bit() to store_bool() for the Spooling in
750 dird_conf.c -kes bug reported by Robert Nelson.
752 kes Correct Makefile bug found by Dan Langille.
754 kes Correct Makefile for Solaris /bin/sh
755 kes Correct mtx-changer.in for Solaris /bin/sh
756 kes Abort if a conf resource does not have a Name =
758 kes Change the name of the regex program to bregex.
759 kes Add the bwild program to the tools directory. It is similar
760 to the bregex program.
761 kes Implement create bregex.h and bregex.c in src/lib from the
762 Python regexp program.
763 kes Use the new bregex.c to implement Regex expressions on Win32.
765 kes More work on migration.
766 kes Implement wild program in tools directory for testing
767 wild-cards. Almost identical to the regex program.
768 kes Up port VSS single thread locking code.
769 kes Replace N_(..) by NT_(...) to inhibit translation of
771 kes Modify Makefile to change the permissions on Working Directory
772 to 770 if the directory is created.
773 kes Do not fail the Makefile if changing the permissions or
774 owner/group on WorkingDir fails.
775 kes Remove early selection of Scratch Volumes in the recycling
777 kes Correct the old recycling algorithm so that Scratch Volumes
778 are selected when looking for a Volume in the changer.
779 kes Correct a typo in the Verify SQL reported by Joe Park.
781 kes Remove automatic case folding on Windows FDs. You must
782 explictly use the 'Ignore Case = yes' option.
783 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
784 scratch volume in an Autochanger early in the 'recycling'
787 kes Make weof() and clrerror() methods of class DEVICE.
789 kes Tweak license to include Microsoft restrictions.
790 kes Move mysql.reconnect to after real_connect(). Thanks to
791 Frank Sweetser for the patch.
792 kes Disallow a backslash in a File = directive (Windows junk)
793 unless the string is quoted.
794 kes Apply Eric's patch to ua_label.c so that daemon protocol
796 kes Add NT_ definition for strings that should not be translated.
797 kes Apply NT_() to ua_label.c
798 kes Remove timed wait for VSS on Win2K3 as it is not yet
800 kes Correct bacula.in script to reference bacula-ctl-xx in the
801 sysconfig directory rather than the bin directory.
803 kes Fix a long standing bug in the bacula start/stop scripts.
804 kes Attempt to add the new bacula-ctl-* files to the rpm.
805 kes Switch to using typeof() for list traversing to avoid
806 as many FC5 g++ compiler warnings as possible.
808 kes Split the bacula start/start script into four files:
809 bacula -kes starts and stops calling other scripts
810 bacula-ctl-dir -kes starts/stops the director
811 bacula-ctl-fd -kes starts/stops the File daemon
812 bacula-ctl-sd -kes starts/stops the Storage daemon
814 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
815 kes Correct editing of JobId from int to int64 in fd_cmds.c
816 kes Eliminate FileSet name race with bash_spaces() and multiple
817 threads by bashing in a local.
818 kes Fix error return from 'use storage' to print a correct error
819 message rather than nothing.
820 kes Correct false re-read last block error message when two jobs
821 are simultaneously writing at the end of a tape.
822 kes Simplify exit conditions in the reserve.c code to avoid
823 possible non-release of reservation_lock().
824 kes Suffle lock order in reserve to avoid deadlock between
825 reservation lock and device mutex.
827 kes Initialize jcr mutex before first use. Thanks to Thorsten for
828 tracking this down for me !!!! as it broke the Win32 build.
830 kes Integrate addition of line count limitation to bsmtp -l from
831 Sebastian Stark <stark at tuebingen.mpg.de>
833 kes Implement regex test program in tools directory.
834 kes Attempt to fix time problem with bsmtp with foreign langs.
835 kes Add strip_trailing_newline() submitted by user.
836 kes Implement regex matching in migrate.c
838 kes Fix bug #537 to allow arbitrary time to mount a volume for
839 restore, if polling is turned on.
840 kes If dir_user or dir-group is specified in ./configure apply it to
841 the working-dir. Fixes bug #533.
842 kes If rescheduling a job cancel the previous incarnation with the SD.
843 Fixes bugs #566 and 557.
844 kes Fix bug #567 do_message() definition type conflict.
847 kes Add more jcr methods and make mutex and use_count private.
848 kes Create lock/unlock methods for jcr.
849 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
850 records to get to seek position.
851 kes Integrate patch from bug #561 to correct conio.c signal definitions.
852 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
853 terminates correctly by doing pthread_kill(). Do not destroy
854 SD cond wait variable between executions of the job. Use local
855 mutex for cond variable to avoid blocking jcr chain. Fix poor
856 use of jcr use count in jobq.c for restarted jobs.
857 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
858 lib/jcr.c -kes prevents locking the jcr chaing.
859 kes Apply patch from bug #564, which corrects listing volumes with
860 multiple autochangers. Apply same fix to next volume list.
861 kes Fix bug #562 where restore bootstrap file is not unique.
862 kes More details in implementing David's migration syntax proposal.
863 kes Save and restore dcr when swapping drives so that if we have
864 a write dcr it is not lost.
865 kes Use new routine lock_reservations() to lock the reservations
866 system, and call it while looking for a volume in askdir.c.
867 This could possibly fix bug #543.
868 kes Stop SD command loop if job is canceled.
871 kes Remove old code from findlib/create_file.c
872 kes Rename mac.c migrate.c
873 kes Add user friendly display of VolBytes in job report.
874 kes Rename target... to previous... to make it a bit easier to
876 kes Add selection type and selection pattern to Migration (idea
877 given by David Boyes).
880 kes The po files should now be current.
881 kes Fix new sql_use_result() code to properly release the
882 buffers in all cases.
883 kes Use the keyword ujobid to mean the unique job id; job or jobname
884 to mean the Job name given on the Name directive, and jobid to
885 be the numeric (non-unique) job id.
886 kes Allow listing by any of the above.
887 kes Add the user friendly job report code for reporting job elapsed time
888 and rates with suffexes from John Kodis <kodis at comcast.net>.
889 kes Add Priority and JobLevel as Python settable items.
890 kes Use TEMPORARY table creation where the table is created by
892 kes Add new code submitted by Eric for waiting on specific jobid.
893 kes Add ACL checking for the dot commands.
894 kes Fix restore of writable FIFOs.
895 kes Fix a bug in bpipe where the string was freed too early.
897 kes Modify the Python class examples to inherit object -kes new way
898 of defining classes. Patch from Felix Schwarz.
899 kes Implement jobuid to replace old usage of job in keywords as
900 suggested by Eric Bollengier.
901 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
902 wait (wait for all jobs to stop)
904 wait jobuid=unique id
906 kes Implement write variables for Python to set Priority (anytime), and
907 Job Level, only during JobInit event.
909 kes Fix the block listing bug pointed out by Arno.
910 kes Update the po files at Eric's request.
912 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
913 accept time qualifiers.
914 kes Make catalog respect ACL.
915 kes Add recycle count to Media record.
917 Changes to 1.39.6-beta1 24Feb04
919 kes Add Rudolf Cejka's new rc-chio-changer.
920 kes Implement pulling Volume from Scratch Pool if the
921 Volume is in the autochanger.
922 kes Implement additional command arguments for update Volume.
926 kes Back port changes to 1.38.5
927 kes Fix recycle SQL for StorageId.
928 kes Fix misplaced quote in mtx-changer script.
930 kes Note. Your database must be updated, or you must create
931 a new database. I have not yet incremented the database level.
932 kes Add Location table.
933 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
935 kes Implement create/get mac record in database for adding extended
936 Migration data to the job record.
937 kes Add new MAC table to update/make database scripts.
938 kes Return Storage name used when getting VolumeNames for a job.
939 kes Change bsr file keyword Storage to Device, which is more accurate.
940 kes Ensure that Mac records are pruned/purged.
941 kes Tweak SD tools to deal with changing media type.
942 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
943 kes Pass pointer to dcr pointer to acquire_device_for_read() so
944 that the subroutine can switch devices, and hence dcrs.
945 kes Modify the multiple MediaType read code to re-use the same
946 dcr when switching devices. This makes the code much more
948 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
949 from a table for restore.
950 kes Add Storage name to VolParams, but it really should be Device.
952 kes Add disk-changer to scripts directory + configure/Makefile
953 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
954 kes Implement store_bit scanner to replace store_yesno. Mostly done.
955 kes Implement new store_bool that stores in a bool.
956 kes Add true/false to yes/no conf directives.
957 kes Make first cut at changing appropriate store_yesno to store_bool.
958 kes Complete implementation of Pool storage devices.
959 kes Move starting clones to job.c
960 kes Move create_restore_bootstrap_file() to job.c
961 kes Make copy_storage() more general to be able to handle
963 kes Cleanup a lot of migration code for manual running, including
965 kes Move getting a scratch Volume into a subroutine.
966 kes Make all places a Volume that is added to a pool to
968 kes Fix bug in autochanger recycle code (improper edit 64 bit).
969 kes Fix segfault in restore command when no value specified.
970 kes Start adding code to handle multiple MediaTypes in restore.
971 kes Eliminate race condition in getting Volume name for
972 two drive autochanger.
973 kes More debug code in autochanger.
974 kes Add storage keyword to bootstrap file, add parsing.
975 kes Move slot in bsr file into Volume record as there will be
976 a different slot for each Volume.
979 kes Implement Pool storage overrides.
981 kes Implement first cut of Migration.
982 kes Implement mysql_use_result() from patch by Karl Hakimian.
983 This reduces significantly the memory consumption during
984 the restore tree building, and hence runs faster too.
985 kes Implement StorageId patch supplied by user (reggie) in bug
986 #536. This should permit Bacula to work correctly with two
988 kes Implement Job listing variations suggested by a user.
989 kes Move updating bootstrap code in backup.c to subroutine
990 update_bootstrap_file().
991 kes Add new job status elapsed time and bytes written user
992 friendly job report output patch sent by John Kodis
993 <kodis at comcast.ne>.
994 kes Implement a storage list in Pools.
995 kes Separate out setup_job() code from run_job().
996 kes Get migration working -kes lots of changes in mac.c in both
998 kes Apply patch from user (Eric Bollengier I think) that fixes a
999 DIR crash when no arguments are supplied to a dot command.
1000 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1001 kes Fix command arg name->volume in label command of gnome-console.
1002 kes Fix SD acquire.c to release correct DCR by explicitly testing
1003 on the dcr address rather than trying to devine if it is a read
1004 or write dcr. This failed in error conditions when the device was
1008 kes Apply user supplied patch for more readable rate output
1010 kes Continue implementing migration.
1011 kes Implement support for removable filesystems in SD.
1012 kes Ensure that btraceback scripts can be read by anyone.
1013 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1014 kes Correct bug where canceling restore before the FD contacts
1015 the SD causes the drive to be left in read mode.
1016 kes Move ofline_or_rewind into DEVICE::close().
1017 kes Eliminate close_device.
1018 kes Convert several dev subroutines to methods (e.g. bsf,
1020 kes Eliminate force_close_device().
1021 kes Implement Device Type directive in Device resource that
1022 can have values File, Tape, Fifo, DVD, or Prog.
1023 kes Add has_cap() method to Device.
1026 kes Add patch from bug #527 to allow RedHat user to specify
1027 options/user/group for starting each daemon in
1028 /etc/sysconf/bacula.
1030 kes Add two new queries to query.sql provided by Arno. One
1031 list volumes known to the Storage device, and the other
1032 lists volumes possibly needing replacement (error, ...).
1034 kes Add periodic (every 24 hours) garbage collection of memory
1035 pool by releasing free buffers.
1037 kes Correct bug counting sized (for display only) in smartall.c
1038 kes Print FD mempool stats if debug > 0 rather than 5.
1040 kes Make db_lock() mutex error fail the job rather than abort
1041 Bacula. Canceling the job caused the mutex to fail.
1042 kes Correct bug in alist.c that re-allocated the list if the
1043 number of items goes to zero.
1044 kes Move the reservation system thread locking to the top level
1045 so that one job at a time tries all possible drives before
1047 kes Implement a reservation 'fail' message queue that is built
1048 and destroyed on each pass through the reservation system.
1049 These messages are displayed in a 'Jobs waiting to reserve
1050 a drive' list during a 'status storage='. Note, multiple
1051 messages will generally print for each JobId because they
1052 represent the different problems with either the same drive
1053 or different drives. If this output proves too confusing
1054 of voluminous, I will display it only when debug level 1
1055 or greater is enabled in the SD.
1057 kes Add enable/disable job=<job-name>. This command prevents
1058 the specified job from being scheduled. Even when disabled,
1059 the job can be manually started from the console.
1060 kes During 'update slots' clear all InChanger flags where the
1061 StorageId is zero (old Media records).
1063 Beta release 1.38.4:
1065 kes Fix autochanger code to strip leading spaces from returned
1066 slots number. Remove bc from chio-changer.
1067 kes Back port a bit of 1.39 crypto code to reduce diffs.
1068 kes Fix first call to autochanger that missed close()ing the
1069 drive. Put close() just before each run_program(). Fixes
1072 kes Add PoolId to Job record when updating it at job start time.
1074 kes Pull in more code from 1.39 so that there are fewer file
1075 differences (the new ua_dotcmds.c, base64.h, crypto.h
1076 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1077 util.c. Aside from ua_dotcmds.c these are mostly crypto
1079 kes Implement new method of walking the jcr chain. The
1080 incr/dec of the use_count is done within the walking
1081 routines. This should prevent a jcr from being freed
1082 from under the walk routines.
1087 kes Start implementing Verify list output.
1088 kes Move the suitable_drive flag to a better place to prevent
1089 premature termination of the reservation if all drives
1090 are busy -kes should fix Arno's diff/inc pool failures.
1092 kes Add mutex to single thread VSS code in Win32.
1094 kes Simplify code in askdir.c that waits for creating an appendable
1095 volume so that it can handle multiple returns from the wait
1097 kes Modify the wait code to permit multiple returns.
1098 kes Return a zero when "autochanger drives" is called and
1099 it is not an autochanger.
1100 kes Make rewind_dev() a method taking a DCR as an argument.
1101 This permits closing and reopening the drive if the
1102 rewind fails as happens if the drive was loaded while the
1103 file descriptor was open. This refreshes the file descriptor.
1104 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1105 if the device is open or not. This should eliminate
1107 kes Return error if reserve cannot find at least one suitable device.
1108 kes Make wait_for_sysop() return correct state information.
1109 kes Fix Win32 state file problem. write was not using compat
1110 code. This should fix bug #500.
1112 kes Modify gui on command to set only GUI mode and not batch.
1113 kes Modify .messages command to always print messages regardless
1115 kes If GUI mode is on, suppress automatic printing of
1117 kes Delete old bnet packet code.
1118 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1119 wx-console. -kes not implemented because bconsole must be updated.
1120 kes Modify restore command in wx-console to set gui on and to use
1121 only .messages instead of messages. Hopefully this fixes bug
1123 kes Fix seg fault in exit of acquire when canceling a job --
1124 reported by Wolfgang Denk
1125 kes Pull in latest reservation system changes from 1.38
1126 kes Make .messages command always print messages regardless
1127 of the automessages flag.
1129 kes Fix seg fault if user labels a drive directory bug #513
1130 kes Remove quotes around Version as it breaks things.
1132 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1133 kes Apply sparse code fix for raw drives and fifos. Bug 506
1134 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1136 kes Correct reservation system to do a last ditch try
1137 for any mounted volume, then anyone anywhere.
1138 kes Add quotes around table Version because of
1139 error in MySQL 4.1.15 -kes bug report submitted.
1140 kes Correct some minor problems with btape in the fill
1142 kes Updates to ssh-tunnel from Joshua Kugler.
1143 kes Added a report.pl program from Jonas Bjorklund.
1144 kes Simplify the O_NONBLOCK open() code for tape drives,
1145 and always open nonblocking.
1146 kes Do not wait for open() if EIO returned (shouldn't happen).
1147 kes Eliminate 3 argument to tape open().
1148 kes Correct the slot # edited in the 3995 Bad autochanger unload
1150 kes With -S on bscan (show progress) do not divide by zero.
1152 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1153 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1154 kes Remove unused code in wait_for_device.
1155 kes Make wait_for_device() always return after 60 seconds of wait.
1159 kes Add stubs for non-crypto build.
1161 kes Use localhost if no network configured
1163 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1164 kes Remove debug print.
1165 kes Add bail_out in error during state file reading.
1167 kes Merge changes made to 1.38.3 into HEAD
1168 kes Add stubs for pygtk-console code
1169 kes Create Makefile.in for pygtk-console code
1171 kes Merge updates into 1.38 branch
1172 kes Update specs to include mysql4 define.
1173 kes Fix when attributes are sent, must be after binit().
1174 kes Stop read_record() if status not ok in second loop.
1175 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1176 and partial records in read_record(). This allows bscan
1177 to get FileIndex at EOT correct.
1178 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1180 kes Fix Win32 built to work with new crypto code.
1181 kes Apply patch supplied by user (slightly modified) to fix
1182 correct detection of holes in block devices and FIFOs.
1184 kes Apply patch supplied by user (slightly modified)
1185 to fix SD hang with multiple pools and bad client
1186 IP. Fixes bug # 508.
1188 kes Add nagios plugin to the examples directory. Submitted by
1190 kes Remove warning message about multiple saves of hardlinked files
1191 from find_one.c as it can generate too many warning messages.
1192 kes Modify most restore error messages to be queued so that they
1193 appear at the end of the job rather than mixted with the restore
1194 listing where they could be "lost".
1196 kes Reset timeout values before select() per patch from
1197 Frank Sweetser for problems with non-blocking sockets.
1198 kes Unlink the state file if either reading or writing it gets
1199 errors. Hopefully this will fix Win32 exit problems.
1200 kes Add sanity check in append.c to ensure that dcr is not NULL.
1201 This can happen if multiple drive autochanger SCSI control
1202 channel and drive indicies do not correspond.
1204 kes Get next volume from Scratch pool before creating a volume.
1205 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1206 kes Remove argument from create_bacula_database for SQLite as it
1208 kes Add back index code so that two drive autochangers can get
1210 kes Change a bunch of debug levels to aid debugging autochangers.
1211 kes Fix reservation so that mutexes are properly applied.
1212 kes Rework reservation algorithm so that two drives can be used
1215 kes Landon merged his data encription changes into the HEAD
1216 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1217 If this patch is applied, the number of days can be specified with
1218 "list nextvol days=xx"
1220 "status dir days=xx"
1221 My use case is to be able to preview the next scheduled job (and the
1222 next tape to be used) on fridays if there are no scheduled jobs during
1226 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1227 kes Fix malformatted bnet error message that caused seg fault
1229 kes Applied user patch to improve README.vc8 in src/win32.
1231 kes Add Migrate, Copy, Archive Job types (some where there)
1232 kes Correct some more editing of JobId's (for 64 bit compatibility).
1233 kes Ensure that StorageId is stored in Media record when ever possible.
1234 kes Add Migration Job to Job.
1235 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1236 Next Pool to Pool resource.
1237 kes Add more code to mac.c (migration archive copy).
1238 kes Change Start Storage daemon job to require read and write storage
1240 kes Pass read storage data to SD as well as write storage data.
1241 kes Remove old code from winservice.cpp
1242 kes Break on error in scan.
1243 kes Fix typo in signal.c
1244 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1245 kes Cleanup how find_device() works.
1246 kes Add read output to Status in SD.
1249 kes Add red-black btree routines
1251 kes Remove abs() in bfile.c so that it compiles on Solaris.
1254 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1255 kes Fix bnet-server bug found on OpenBSD. Bug #486
1256 kes Fix cancel failure bug. Bug #481
1257 kes Fix failure when Pool name has spaces. Bug #487
1258 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1259 kes Fix a couple of free()s in src/filed/acl.c
1260 kes Fix memory overrun in bfile.c in building OS X resource
1261 fork filename. Bug #489
1262 kes Add Pool name to SD status output.
1264 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1265 kes Make sure to set storage before trying to set drive.
1266 kes Add bacula_mail_summary.sh to examples directory. It makes
1267 a single email summary of any number of jobs. Submitted
1269 kes Make sure when we do a mount to unblock the device even
1270 if the drive could not be opened.
1272 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1273 and correct a few minor problems to make it build on Linux.
1275 kes Remove delete of CVS from all Makefiles
1276 kes Fix seg fault when clicking on Add button in wx-console
1277 restore panel. Bug #470.
1278 kes Fix copyright date and URL typo -kes bug #468.
1279 kes Change autostart install for FreeBSD to look for rc.conf
1280 rather than rc.local as suggested fix for bug #466.
1281 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1282 grant on status. Bug #465
1283 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1284 update script. Bug #464
1285 kes Tweak #ifdefing a bit in new Win32 stream code.
1286 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1287 kes Add documentation of performance #defines
projects / bacula / bacula / blob