1 Technical notes on version 1.39
5 kes Save and restore volume name in stored/mount.c fixed bug #712
6 where wrong tape was requested in a mount.
7 kes Implement cleaner orphan buffer dumping with buf address.
8 kes Fix orphaned buffer when canceling job waiting on op intervention.
9 kes Update projects file for next vote.
10 kes Implement a fix (more could be done) for bug #728 where a double
11 EOF is writing on the Volume when spooling is enabled and the
12 connection with the FD fails (FD crash, comm error).
13 kes Disable attempting to autolabel when polling and device is not
14 a tape. This fixes bug #730 where polling with a removable disk
15 not mounted caused lots of new Volumes to be created then marked
18 kes Enable VSS by default.
20 kes Complete hopefully the last of the copyright transfer changes.
21 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
22 that migration writing to multiple volumes doesn't mess up reading
23 Volumes. This should fix bug #720 -- multivol migration fails.
24 kes Make migration SQL look only for Type='B' jobs to migrate. This should
25 fix bug #724 jobs getting migrated twice.
26 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
27 kes Implement dev->clear_cap() and dev->set_cap() methods.
28 kes Turn off disk seeking on restore for DVDs since I am not 100%
31 kes Implement code that should properly set that a job was migrated,
32 if the migration was successful even if there were no file to
34 kes Apply Richard's patch to fix building or filed/restore.c without
36 kes Ensure that at least one block is written by the SD even if the
37 FD dies or fails -- should fix bug #728.
38 kes Convert stored/record.c ASSERT into a soft fail if the length of
39 a record is too insanely long. This should fix bug #???
41 kes Fix automatic labeling of File volumes, which was broken by new
42 removable device code.
44 kes Remove typedef uLong for HP in baconfig.h. It broke things.
45 lf Fix job byte reporting -- the digest code runs in verify.c and
46 increases this value. The better solution is to digest the
47 stream as we receive it, thus removing the need to re-read
48 from disk at all, but that requires more extensive and
49 potentially destabilizing changes.
50 lf This commit fixes backup and restore of HFS+ resource forks.
51 lf Add a long-missing 'break' statement in HFS+ attribute
52 handling that resulted in restore failures.
54 ebl Fix runscript to always execute command after all job type.
56 Version 1.39.30 released:
58 kes Mark build-depkgs-mingw3 executable in configure process.
59 kes Update autoconf/config.h.in to include LOCALEDIR
60 kes Undefine NLS settings for wxWidgets as there is a conflict with
61 their way of doing things.
62 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
63 kes Change a bunch of ->hdr.name to ->name()
64 kes Straighten out handling of read and write pools for Migration, including
65 getting the code in the proper order.
66 kes Improve migration error messages and debug output.
67 kes Shorten code path in migration if nothing found to do.
68 kes Implement read/write pool in migration job report.
69 kes Move ua_run.c select_job_level code into a subroutine (readability).
70 kes Move ua_run.c display_job_parameters into a subroutine.
71 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
72 restore dependent on a valid catalog containing the Volume name.
74 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
75 make it easier for the user to change.
76 kes Fail any backup job that tries to use encryption and sparse options.
77 Hopefully this is a temporary change.
78 kes Correct the EndJob return string for non-backup jobs.
79 kes Review the encryption restore code.
80 kes Implement a new encryption regression test with compression.
81 kes Modify migrate not to fail if nothing found to migrate.
82 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
83 because they were not always set correctly.
85 kes Update configure.in to include python 2.5 search.
86 kes Back out unwanted migration change reported by Richard Mortimer.
88 kes Make migration with no files to migrate set normal termination.
89 kes Change message when job manually started to say Job queued. ...
90 kes Add job report indication of whether or not VSS and Encryption were
92 kes Modify sparseBlock variable name to make the code clearer.
93 kes Add more sparse tests to regress using gigaslam sparse file
95 kes Enable data encryption code.
96 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
97 only two blocks -- i.e. it is a real sparse file.
99 kes Enable disk seeking on restore.
100 kes Implement the SD 'Block Positioning = yes|no' directive. This
101 allows the user to turn off block level seeking, but restores
103 kes Change the word illegal to read invalid in a few places.
104 kes Fix Win32 build, which broke when I added parse_args_only in
105 lib. I'm not sure I got the entry point right for msvc.
106 kes Turn off data encryption. It can be enabled by defining
107 DATA_ENCRYPTION in src/version.h and recompiling.
108 kes Implement flag to turn off data encryption feature.
109 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
111 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
112 The main problem was that signatures were being generated on blocks
113 of zeros, which is unnecessary.
115 kes Fix scanner (next_arg) to handle leading double quote correctly.
116 kes Modify cd command in restore tree to look at full argument without
117 keywords. This fixes bug #716.
119 kes Do not update Migrated Job type if migration does not terminate
120 normally. This fixes bug #719.
121 kes Update ReleaseNotes
122 kes Purge Job records from the catalog for Migration. This was
123 not properly done previously. This fixes bug #718.
125 kes Initialize msg_type to M_INFO in migration. Pointed out by
127 kes Add some fflush() statements for debug output. This should not
128 really be necessary and defeats buffering but users continue
131 kes More copyright changes.
132 kes Make sure we don't detach from the despool read device since it
133 is a temporary structure where the condition variables are not
134 initialized. Bug #711.
136 kes Add Bacula version+date to Client record. This is a very minor
137 security problem in that passing the version facilitates a hacker's
138 life, but it will make support easier.
139 kes Implement fixes to make disk seeking work. Currently turned
140 off in version.h pending reserch on what problems it will cause
141 because of the previous bsnprinf() sign extension bug.
143 kes Add Landon's refactor of restore Feature request to the
145 kes Tweak debug levels and messages for examining the disk
148 kes Cleanup some of the error termination code in migration.
149 kes Separate read/write source strings to keep track of where
150 storage devices are used in a job.
151 kes Implement a new method of keeping track of which storage
152 device is used in a Job. USTORE keeps both a pointer to the
153 resource and to the source string.
154 kes Modify all code to use new storage set subroutines in job.c
155 kes Modify migrate.c so that the definitive selection of the storage
156 resource is done in the do_migration_init() routine prior to
157 the job going into the job queue. This permits accurate
158 deadlock detection (same read and write storage resource).
159 kes Remove bfill from btape (I think it was a left over stub).
161 kes Make sure that the storage for a job is pulled first from
162 the Pool and if not from the Job.
163 kes Ensure that either the Pool or the Job specifies a Storage
166 kes Start applying new FSFE copyright.
168 kes Add additional error messages in acquiring a drive for read.
169 kes Make WritePartAfterJob the default so that the last DVD part
170 always gets written to the DVD by default.
171 kes Add additional error messages in migration.
172 kes Suppress redundant error messages in migration (possibly more to do).
173 kes Apply Martin's fix (updated to 1.39) that takes into account
174 run storage overrides in the Director status display.
175 kes Implement, but turn off the submitted code that sets the EOT
176 model on FreeBSD machines. Turning on this code is too risky at
177 this point in the development.
179 kes Implement unique dbid routine for migration to prevent the same
180 JobId from being migrated twice. This should fix bug #709.
182 kes Apply Jaime Ventura's 'mail on success' patch.
183 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
184 if memory usage gets too big.
185 kes Tweak migration to ensure that read/write devices are different.
187 kes Create an AUTHORS file to list Bacula contributors.
188 kes Add Richard Stallman's four GPL freedoms to LICENSE
189 kes Require the conf file to have a valid NextPool for writing the
192 ebl Enable RecycleCount in catalog.
193 ebl Fix "echo python | bconsole" segfault
195 kes Implement code to pass the MediaId to the SD. The SD then uses
196 this MediaId when creating JobMedia records. This fixes a bug
197 with Migration where the MediaId got set to the second Volume
198 read rather than the write Volume. Possibly (unlikely) fixes
200 kes Remove NextPool from Job resource.
201 kes Edit a few numbers in the restore dialog with commas.
202 kes Note, the DIR<->SD protocol has changed.
204 kes Replace () by {} in configure.in for proper HP configuration.
205 kes Shorten some lines over 80 characters in filed/backup.c
206 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
208 Version 1.39.28 released:
210 kes Change error message 'illegal' to 'invalid' -- bug #707
211 kes Add rather primitive device resource deadlock detection in
212 the job queue handler. It detects the same read and write device
213 for migration and cancels the job.
214 kes Start adding a unique_dbid_hander() routine in migration to avoid
215 duplicate mediaids and duplicate jobids.
216 kes Add patch from bug #708 to permit relative paths such as ../xxx
217 in the restore tree routine.
218 kes Add Eric Bollengier's patch to reduce locking time in the SD after
219 despooling, and thus many jobs finish faster.
220 kes Correct locking order of reservations lock and device mutex in
221 reserve.c -- this should correct Arno's deadlock that occurred
222 when doing mount/unmount at the same time a job is reserving a
225 rbn Fixed problems with encryption when combined with compression
226 or sparse files. Unfortunately this means that all previous
227 encrypted backups can't be restored.
228 rbn Fixed problem in bfgets with Windows and Mac end of lines.
229 rbn Fixed bug in Windows version of close_bpipe() that cause programs
230 like bsmtp() to hang waiting for the pipe to be closed. Fixed
231 binary file type problems in open_bpipe().
232 rbn Fixed a number of bugs in the mysql DB scripts.
234 ebl Fix broken runscript on director. (RunBefore, RunAfter)
235 ebl Use M_ERROR instead of M_FATAL in runscript.c
237 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
238 rbn Ignore UTF-8 marker at the start of .conf files.
239 rbn Add stab2cv to 3rd party dependencies. This is a utility I
240 wrote that is licensed under the GPL and available on SourceForge.
241 It converts the stab debugging info generated by gcc into Codeview
242 format. Currently it just translates function names to global
243 symbols. This is sufficient to get reasonable stack traces from
244 Dr Watson and to look at minidumps.
245 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
246 rbn Enable Windows XP look and feel for the tray icons and wx-console.
247 rbn Add Windows specific FileSet example to bacula-dir.conf.
248 rbn Reorganize Start menu so that documentation and configuration are
251 rbn Change daemons and utilities so that if -c is omitted from the
252 command line AND there is no configuration file in the current
253 directory then the 'standard' configuration file (eg
254 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
255 doesn't contain any path separators AND there is no configuration
256 file by that name in the current directory then the 'standard'
257 configuration file directory will be searched for a file by that
259 rbn Fixed restore on Windows so that backslashes as path separators works.
260 rbn Add missing query.sql file to Windows installer.
261 rbn Fixed Windows versions of catalog backup scripts.
263 kes Fix optional files in Makefile.in of src/filed that caused
264 a syntax error when using no optional files.
266 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
267 messages; there is no reason to attempt to load a private key.
268 from master key files.
270 Version 1.39.26 released:
272 kes Apply the three patches from Richard Mortimer.
273 bacula-reposition.patch, bacula-tape-reopen.patch, and
274 bacula-eod.patch. This corrects tape positioning on older devices,
275 and also a problem with btape.
276 kes Apply fix from bug report #696 where writing to a FIFO does not
277 work due to a dumb typo.
278 kes Unlock the tape door before the file descriptor is released. This
279 should fix lots of somewhat subtle failures when using an autochanger.
281 kes Correct mtx-changer bug that I introduced in a recent commit, and
282 pointed out by Robert Nelson -- thanks.
283 rbn Fix Windows' daemons so that messages print to stdout if not
284 running as a service.
285 rbn Add daemon name to trace file name (eg bacula-dir.trace).
286 rbn Fix environment variable expansion in directory names on Windows.
287 rbn Fix autochanger support in fill command.
288 rbn Update SQL scripts to match Unix versions.
289 rbn Fix daemon usage displays.
290 rbn Cleanup bacula-dir.conf template.
291 rbn Install openssl.cnf so that the openssl.exe installed in the
292 Bacula\bin directory can be used to generate keys and
293 certificates for TLS and encryption.
294 rbn Fix cleanup of spool files on Windows.
295 rbn Remove /silent option from daemons on Windows. The new default
296 is the same as the old /silent. To enable the message boxes that
297 previously were suppressed by /silent you must add /debug instead.
298 NOTE: As a result of this change, the first time you upgrade from
299 a previous version of 1.39.x you will receive the message
300 boxes when the remove of the old services succeeds. This
301 is the same behaviour as when migrating from a version prior
303 However, going forward, these message boxes will not appear on
304 upgrades or new installs.
305 rbn Add new /debug option. This option enables the message boxes that
306 previously were suppressed by the /silent option. In addition the
307 daemons running as services will open a console window if this
309 rbn Fix bug with service not being removed on migrated installs. This
310 should correct those cases where the file daemon install was failing
311 when upgrading from versions prior to 1.39.x.
313 kes Turn on heap reporting in Dir with zero debug level.
314 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
315 send the same message to stdout.
317 kes Begin work on new GUI 'console'.
318 kes Make configure look in non-standard MySQL library directory
320 kes Make mtx-changer automatically configure the autochanger wait
321 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
323 kes Correct drop_sqlite_tables.in script to not delete the database.
324 kes When writing to a log file, close and reopen the file descriptor
325 if there is an error writing the file.
326 kes Modify the autochanger loaded?, load, and unload commands to print
327 the full text of any mtx output if there is an error. Helps to
328 ease diagnosis of autochanger problems.
329 kes Correct a few Win32 errno returns in the VSS code so that hopefully
330 a resonable Win32 error message will be printed.
331 kes Convert a few strcat()... to bstrncat() in the Win32 code.
333 rbn Added Windows version of bsmtp.
334 rbn Fixed path search for Windows so that Bacula\bin is automatically
335 searched for programs and scripts.
336 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
339 Version 1.39.24 released:
341 kes Apply dvd find volume patch from Richard Mortimer.
342 kes Eliminate the dvd specific mount routines using only the
344 kes Make update_free_space a method of DEVICE and rename
347 kes Require a messages command acl to be able to receive messages
349 kes Add console, system, and scan job types in util.c.
351 kes Print the Volume purged message only for real jobs to keep
352 from cluttering up the daemon messages.
353 kes Lock the tape drive door while Bacula is using the device.
354 kes Add back the 'No Jobs running' message to FD and SD status because
355 my regression script depends on it, and I'm too lazy to change the
357 kes Start using structure assignments (not too happy about it ...).
358 kes Fix a bug in the tools Makefile that broke on Solaris.
359 kes Unload any autochanger drive during a 'release' command.
361 kes Enhance error message when restoring without bootstrap file.
362 kes Check restored size only for regular files.
363 kes Store Python job level in job record in Dir.
364 kes Add back code to open tape device nonblocking, but if rewind fails
365 release file descriptor.
366 kes Modify acquire.c to first try autoloading the device. Also, ask operator
367 to mount tape if drive cannot be opened.
368 rbn Made Windows service tray status windows resizable.
369 rbn Fixed horizontal scrolling of text in status window.
370 rbn Preserve horizontal and vertical scroll position while
371 updating. This prevents the display being reset to the
372 top line every 5 seconds.
373 rbn Fix Windows cross-compile compatibilty problems with
374 *nix variants such as OS X without the zic command.
375 rbn Eliminate dependency on man2html.
377 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
379 kes Fix a compiler warning in compat.cpp
380 kes Change strcpy to bstrncpy in compat.cpp
381 kes Remove some broken code in bdb_list.c
382 kes Fix, hopefully the last, ACL problem in the restore command.
383 kes Update the README.mingw32
384 kes Add new version of upgrade-win32-client.txt to examples directory.
385 Submitted by Michel Meyers.
386 kes Print an INFO message in the job report when a Volume is marked Purged.
387 rbn Fixed handling of external program and script execution
388 so that the format of the command line is more flexible.
389 Now executable path names containing spaces are translated
390 to the equivalent short name automatically. The result is
391 passed to cmd.exe with the quotes removed.
393 kes Apply the recycle patch from Richard Mortimer.
394 kes Convert a few if statements in dev.c to switch statements.
395 kes Start using print_errmsg instead of bstrerror().
396 kes Print a job message in SD when a job is marked to be canceled.
398 kes All code added back. Fixed block.c read/write to loop only 3
399 times. This apparently keeps the OS from crashing (at least
401 kes The kernel bug still persists. Backup something then immediately
402 do a bscan on the same tape, and the kernel will crash.
403 kes Simplifed tape open(). It no longer uses nonblocking mode, which
404 means that opening with no tape loaded will probably take at least
405 6 minutes before an error is reported.
406 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
407 when doing set_os_device_parameters.
408 kes Report open error in mount.c
409 kes Remove all .exe files from the installer directory on make clean.
411 kes Start adding back removed code.
412 kes Back out a number of changes because backups to tape crash my
414 kes Remove the inetd code from the File daemon.
416 kes Add -c option to pg_dump so that it initializes tables when
418 kes Fix FirstWritten time on Volume to be obtained from SD so that
419 it is the actual time the volume was first written.
420 kes Minor Makefile changes.
421 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
422 ebl Add yes keyword to prune/purge command
424 kes Correct a test in block.c that prevented restore of a DVD from
425 looking at the last part in the spool directory.
426 kes Make some error messages clearer mostly by using the word DVD
427 in the message. Improve infor message in read_record for DVDs.
428 kes Remove DVD kludges in dircmd.c label/relabel.
429 kes Move the dvd relabel code from dircmd.c into
430 write_new_volume_label_to_dvd() adding a relabel argument.
431 kes Rewrite the truncate_dvd() code to be much simpler and
432 more logical. First blow away any spool part, then create a
433 new empty part and write to the DVD.
434 kes Rewrite the can_write_on_non_blank_dvd() code making it
435 only ensure that no valid data is on the DVD -- i.e. it
438 kes Minor Makefile fixes.
439 kes Put attach_dcr_to_dev in a subroutine.
440 kes Make attaching/detaching to/from a device use a flag and
441 only detach if actually attached.
442 kes Add dvd-simulator.in to scripts directory and add to configure.
443 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
444 This could be a cause of a number of drive reservation problems.
445 Note, this code is now in attach_dcr_to_dev().
446 kes Suppress doing Volume updates if it is a system job. This should
447 prevent the DVD label blocking.
448 kes Clear the freespace ok flag in a couple of strategic places.
450 kes Put removing zero sized spool part file in subroutine and
451 call from release_device().
452 kes Add Richard's patch for relabel to dircmd.c, but save and restore
454 kes Rework a lot of subroutines in dev.c to take dcr as an
455 argument. This is done to eliminate the usage of attached_dcrs
457 kes Change truncated_dvd to blank_dvd, which seems more suitable.
458 kes Apply most of Richard Mortimer's truncate patch.
459 kes Create lseek() method for DEVICE that takes dcr as an
460 argument. This is to eliminate the use of attached_dcrs in
461 lseek(). The calls to lseek_dev() must still be changed.
463 kes Apply Richard Mortimer's patches for printing an error
464 message in btape when a DVD is used, and to initialize traceback.
465 kes Added error message to btape when trying to access a file.
466 kes Move prototype of update_slots() to protos.h.
468 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
469 and FDJobStatus to the Director Python variables.
470 kes Make sure valid argument passed to str_to_utime() where Arno
472 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
473 I.e. part of two different patches.
475 kes Modify disk changer to simulate some of the error conditions
477 kes Make sure the close() call in the SD tools is just before the
479 kes Implement dir_get_volume_info() in bls using the patch from
480 Richard Mortimer but call find_num_dvd_parts().
481 kes Implement find_num_dvd_parts() that mounts and scans a DVD
482 and counts the parts.
483 kes Move the omode code in open_dvd() up so that the cannot
484 write on blank disk can check can be bypassed for read mode.
487 kes Disable normal data spooling for DVD writing which uses
488 a different spooling mechanism.
489 kes Apply patch from Richard Mortimer to ensure that the number
490 of DVD parts is correctly updated.
491 rbn Save installer details log in the Bacula directory as
493 rbn Add installer generation of client and storage templates
494 suitable for @inclusion on the director.
495 rbn Mark previously installed Win32 components read-only since
496 deselection doesn't do anything.
498 Version 1.39.22 beta released:
500 kes Fix logic error in handling error return from mtx-changer
502 kes Make status from SD aware of -1 (unknown) Slot status.
503 kes At Eric's suggestion make both the 'slots' and 'drive' commands
504 to the Storage daemon work even if the drive is busy.
505 kes Make two separate Win32 menu links for starting bconsole and
506 wx-console in winbacula.nsi
507 kes Apply DVD part_spooled patch from Richard Mortimer
508 richm@oldelvet.org.uk
509 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
510 rbn Fixed problems migrating settings from previous releases in
511 Win32 installer. Add Readme.txt with an option to show it on
512 the installer Finish page.
514 kes Use get_catalog_resource() to open catalog database
515 to ensure that ACLs are respected and that user is
516 correctly prompted for database.
517 kes Integrate multiple console/director patch from
518 Carsten Paeth calle@calle.in-berlin.de
519 ebl Add character substitution in Job/JobDefs WriteBootStrap.
520 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
521 kes Apply patch supplied in bug #656 to pass priority field
522 in the run dialog to the Director in gnome console
523 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
524 this will fix bug #627 where Bacula eventually gets
525 confused about what Volume it wants.
526 kes Add a new close_part() class in the SD to save the device
527 state around open/close_part/open for DVD writing. This
528 should fix the num_dvd_parts getting zeroed as reported by
530 kes Apply patch from Richard Mortimer that correct edit code
531 for debug output of st_size.
532 ebl Add support of encrypted data stream to bscan.
533 display data_len instead of data content (may be binary)
535 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
536 bcopy. Fixes bug #669 reported by Eric.
537 kes Fix incorrect number of arguments in SQL statement in
538 sql_get.c as reported by Eric.
540 kes Update examples directory.
541 kes Remove unused variable in winservice.cpp
542 kes Make Win32 make command build installer.
543 rbn Add new Install Type page, used to select between Automatic
544 and Custom installs. Automatic installs only prompt for
545 configuration items that can't be reasonably defaulted.
546 rbn Added Bacula logo to page headers.
547 rbn Added Upgrade support
548 - Configuration and component selection are migrated from
550 - Configuration of upgraded components is preserved and
552 - Configuration of new components is handled according to
553 the Automatic / Custom selection.
554 - Component selection is defaulted to previously selected
556 rbn Installation of Server components is disabled on
557 Windows 95, 98 and ME.
558 rbn Added URLs for support, info and upgrades to Bacula entry
559 in Add/Remove Programs.
560 rbn Added Version info to Bacula entry in Add/Remove Programs.
562 kes Correct dvd code that breaks tape labeling.
563 kes Implement Enabled on update slots.
565 kes When doing a label, pass the VolBytes back to the Director,
566 which puts it in the catalog.
567 kes Print an error message if the user attempts to prune an
569 kes Need to start using %ld when sscanfing 32 bit values.
571 kes Correct the counting of VolCatBytes for DVDs.
572 kes Add code to mount.c to require that VolCatBytes corresponds to
573 what is actually found when doing an append.
574 kes Update freespace only after writing on the DVD.
575 kes Remove code that blows away the current part in the spool file.
577 kes Apply new dvd-handler patch from Richard Mortimer.
578 kes Tweak so that debug level 20 shows only DVD commands.
579 kes Correct spooled_part flag in dev.c close() so that it is cleared
580 when the spool file is deleted or does not exist.
581 kes Print part number in read_records when eof hit (restore).
582 rbn Installer default changed to start services on new install.
584 kes Make find with no args in tree restore return error rather than
585 stopping the selection. Fixes bug #665
586 kes Rework DVD writing to ensure that the last part is written
587 on open_next_part when dealing with a spool file.
588 kes Correct the lseek_dev() routine to handle end point correctly
589 (bug introduced by me).
590 kes Allow part number to exceed num_dvd_parts in lseek_dev().
591 rbn Change make_session_key on Windows to use WIN32 APIs to produce
593 rbn Add new tool scsilist.exe which displays the changer, tape and
594 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
595 to add them to bacula-sd.conf.
597 kes Apply dvd-handler patch from Richard Mortimer.
598 kes Apply dvd error check patch from Richard Mortimer.
599 kes Apply bpipe race patch from Richard Mortimer.
600 kes Rework how DVD labels are handled and set append only
601 when part > num_dvd_parts.
603 kes Rework many features of DVD writing and reading. Added many error
604 messages. Most importantly changed part to represent the current
605 part number base zero. This makes current DVD writing incompatible
606 with previous version.
608 kes Add host:port to connect failure messages to FD and SD from Dir.
609 kes Add WhereACL to console ACL list. If nothing is specified, only
610 the default is permitted for restore. Otherwise, *all* allows any
611 path, or you can specify permitted paths. This should allow control
612 over where users can restore files. This is untested.
613 kes Modified message to add a ? (as in loaded?) when querying the autochanger
614 for what Slot is loaded.
615 kes Fixed the use of Slot, so that is more correctly maintained, thus
616 eliminating unneeded duplicate calls to determine what Slot is loaded.
618 kes Install man pages with 'make install'
619 kes wx-console crashes because of differences between Bacula and wxWidgets
620 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
622 kes correct improper indenting in wx-console/console_conf.c
623 kes update wx-console header copyrights
624 kes Fix bug #658 where wx-console mangles file/directory names containing
627 kes Add Media.Enabled flag to client backups for dotcmds.c
628 kes Enforce Media.Enabled=1 for a current restore to work.
629 kes Require restore case 3 to have sqlquery permission to work.
630 kes Remove obsolete del_MAC sql command.
631 kes Ensure that bscan creates Volumes with Enabled=1.
633 Version 1.39.20 beta released:
635 kes Correct missing Client table reference in SQL pointed out by
638 kes Fix Win32 build (new entrypoint, start baculafd).
640 kes Add -n option to bconsole to turn off conio.
641 kes Print JobIds to be migrated in Job Report.
642 kes Add additional user supplied notes to the messages part of
643 bacula-dir.conf concerning multiple email addresses.
644 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
645 kes Add more recent Feature requests to Projects file.
647 kes Apply Maritn's fix to src/win32/Makefile.
648 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
649 kes Implement pruning for Migration and migrated jobs.
650 kes Implement PoolOccupancy migration.
651 kes Implement PoolTime migration.
653 kes If doing a mount, look for a slot, and if specified pass it to
654 the SD so that it can load the autochanger.
655 kes Return DVD=1 flag if a label command is done to a DVD. This
656 permits setting VolParts to 1.
657 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
658 rework ua_label code based on DVD media type to use DVD flag returned.
660 kes Eliminate some compile warnings in dird_conf.c
661 kes Format the bytes field in the terminated jobs part of the status
662 command for the three daemons with suffixes to reduce print size
663 of backup bytes. Suggested by a user.
664 kes When not descending into a directory, print the File= name that
665 triggered it -- makes why not descending a bit clearer.
666 kes Do not unload autochanger when doing a list command -- basic code
667 from Eric Bollengier.
669 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
670 to build-depkgs-mingw32. It now handles two options -h to display
671 help and -C to reextract the source and apply the patches. The -C
672 option is useful for updating the source after new patches are
674 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
675 This allows updating to new versions without having to modify the
676 script and makes it easier to figure out which packages and which
678 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
679 as build-depkgs-mingw32 except they are built using Microsoft Visual C
680 and placed in the depkgs-msvc directory. There is also an
681 External-msvc file to describe the packages.
683 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
685 kes Fix bug #462 incorrect error message printed when client script called
686 from File= was not found.
687 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
688 do a rewind on Solaris when no tape is in the drive (Solaris does not
689 have the detailed errno found on Linux). Added Solaris specific code.
690 Note, this may apply to other OSes as well.
692 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
693 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
694 fix bug 648 - update sqlite script patches, lock out gnome2console
695 builds for platforms with gtk+ < 2.4.
696 Updated build_rpm.sh - add remote source directory, add switch for
697 signing, refine file names.
698 Updated spec file again for Mandriva build as they have this curious
699 custom of silently converting all manpages to bzip2 format just before
700 the final packaging step.
702 rbn Fixed the Windows Makefiles so that they won't accidentally try and
703 pickup binaries for the Unix build. This allows both the Unix
704 build and the Windows build to be built in the same tree without
705 interfering with each other.
706 rbn Fixed error handling and cleaned up mtx-changer.cmd.
707 rbn Added the rest of the database scripts. These are installed but are
708 not yet edited for variable replacement.
709 rbn Broke out the cats functionality from bacula.dll and put into new
710 separate dlls for each database type. At installation time the
711 correct one is copied to bacula_cats.dll.
712 rbn Eliminate the need to install the mysql.dll on client only builds.
713 rbn Moved dird/sql_cmds.c into the cats directory so all the database
714 specific #ifdefs were in the cats directory.
715 rbn Added a new sql_cmds.h with all the declarations for the variables
716 exported from sql_cmds.c.
717 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
718 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
720 kes Correct improperly formatted list command output reported by Dan.
722 kes Correct despool time calculation.
724 kes Remove previous changes to compat.cpp as they create problems.
725 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
726 kes Attempt to fix problems with the msg_queue crashing on Solaris
727 when Bacula is terminating, but problems remain.
728 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
729 name editing problems with too many \\?\es.
730 kes Fix some Bacula source code style problems in compat.cpp.
731 kes Add debug code to compat.cpp and convert non-Bacula debug code
734 kes Change the name of the technical notes file from kes-1.39 to
735 technotes-1.39. Prefix my messages with 'kes '.
736 kes Allow dequeue_messages() to be called twice. Should fix bug
738 kes Add Job type to bscan Job information output.
740 kes Update copyright date in program files, and for the most part
742 kes Implement %q in bsnprintf.c apparently I forgot it.
744 kes Make disk-changer sed command compatible with FreeBSD.
745 kes Make a first cut at a ReleaseNotes and ChangeLog for a
747 kes Make make clean descend into the src/win32 directory.
748 kes Fix some #ifdefing so that Solaris and FreeBSD compile
749 sys/stat.h was turned off.
750 kes Use suffix editing for new transfer rate messages.
751 kes Attempt to come up with a workaround which seems to be an OS
752 bug where write() returns EBUSY. IMO this should not happen.
753 It triggered in truncatebug test. The workaround retries using
755 kes Eliminate a strerror() call in a class method that failed with
757 kes Use rm -rf rather than rmdir to delete the src/win32/release
758 directory during make clean.
760 kes Make bscan ignore ACL streams.
761 kes Update projects files with new Feature Requests.
762 kes Generate current English and French manuals and upload
764 kes Update the home page to include the new British/French flags to
765 switch between translations. Work done by Alexandre Baron.
766 kes Make disk-changer script print an error message if the changer
767 directory is not defined.
768 kes Create a generic DB routine for getting an int (32/64 bit) from
770 kes Add more migration code.
771 kes Add a few more files to .cvsignore here and there.
772 kes Minor fixes for SD write rate and despooling rate.
773 kes Turn off new test code in src/console.c
777 kes Incremented the version number to signify that all of Robert's code
778 for Win32 that was in the branch is now integrated into the HEAD,
779 and that Eric has submitted code that we hope will provide limited
780 backward compatibility with 1.38 file daemons (more testing to be
782 kes I rationalized a few of the names of the variables (mainly jcr names)
783 that are used during migration as keeping three different jcrs at the
784 same time clear in ones head is not easy.
788 eb Tweak new runscript feature to work with 1.38.x FDs.
789 eb Correct crypto.c to fix segfault when restoring an encrypted stream
790 on fd which don't use rsa keys.
791 eb Add yes/no English keywords on localized yes/no questions.
793 kes Several important commits from Robert Nelson for code cleanup and
795 kes Modify console.c so that when conio is enabled, it converts \n to
796 \n\r before outputting to the console. Hopefully this will fix
797 the problems with expect in Perl that Eric saw.
799 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
801 kes Add Comment field to llist of a volume.
802 kes Allow true/false in some yes/no questions.
803 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
804 kes Remove a few /n's when scanning commands from another daemon. This
805 permits adding additional fields later.
806 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
807 kes Update README.mingw
809 kes Tweak authentication to work with 1.38.x FDs.
810 kes Tweak catalog make scripts.
811 kes Fix catalog upgrade scripts so that they work.
812 kes Correct despooling debug code to eliminate race condition.
814 kes Add additional fields as specified by Arno to LocationLog.
815 kes Add comment field to the Media record.
816 kes Add Time field to the Log record.
817 kes Correct migration SQL (thanks to Bill Moran) so that it
818 runs with PostgreSQL also.
819 kes Add spooling/despooling info in status output of SD.
821 kes Spend a lot of time integrating mkcdrec with the rescue disk.
822 kes Add VOLMGMT message class for volume management messages (none yet).
823 kes Add CATALOG as a destination. It goes into the LOG table.
824 kes Implement the Log table in the DB.
825 kes Implement the Location Log table in the DB (for user use).
826 kes At Eric's request add a run_scripts() just after blast_data in
829 kes Add Enabled column to Location, correct some typos in DB schemas.
830 kes Correct bug I introduced into RunScripts enum.
831 kes Add log table to Catalog
832 kes Purge original job migrated if the migration terminates normally.
833 kes Cleanup purging of files/jobs so that it is done only in a
835 kes Add new VOLMGMT message class.
836 kes Add Catalog message destination (user conf code remains to be written).
838 kes Modify read_record and friends to properly deal with migration
840 kes Update debug code in read_record.
842 ======================= Warning ==========================
843 Separate read and write storage in Jobs in the Director. This
844 is a major rewrite of some of the low level code and hence has
845 a high probability of introducing bugs.
846 ==========================================================
848 kes Move the job init code up to *before* the job is put into
849 the job queue (resource allocation queue). This permits the
850 job to establish whether it will read or write or do both.
851 kes Add name() methods to all the resource classes.
852 kes Implement separate read and write storage resource
853 allocation/deallocation in jobq.c
855 ======================= Warning ==========================
856 Implemented new method of getting the default Storage from the Media
857 record rather than from the MediaType for restore. As a fall
858 back, if no Storage is defined, use the MediaType. This
859 eliminates most all prompts if there are multiple MediaTypes
860 used. This is an important and fundamental change.
861 ==========================================================
863 kes Add more detail (Storage, Device) to list of volumes printed
865 kes More code in migrate. In particular start multiple jobs if
867 kes Probably overkill, but ensure that the bsr is unique even within a
869 kes Rework bsys.c drop() so that it now should work as expected.
870 kes Update a bunch of old copyrights -kes particularly in .h files.
871 kes Remove src/lib/bshm.c/h
875 ======================= Warning ==========================
876 All hash codes in the database are now kept in world
877 compatible base64 format (no = filling). This means that
878 all FileSets will be updated and if you are running
879 verify jobs, you must do an InitCatalog.
880 Authentication uses the new algorithm, but should be
881 backward compatible with 1.38.x
882 ===========================================================
884 kes Modify the authentication routines so that the 1.39.15 Director
885 always runs with the compatible binary to base64 code (same as
886 the rest of the world). It will however detect if an SD or
887 FD is running the old code and if that is the case, will use
888 the old algorithm for authentication. However, all consoles must
889 use the compatible algorithm, and all data entered into the database
890 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
891 use the compatible algorithm.
892 kes Rename the cram_md5 routine names to be slightly more appropriate
893 to what they are doing (challenge and respond).
894 kes Robert committed his #ifdef and header cleanup.
896 kes Fix a compiler warning in files/backup.c
897 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
899 kes Robert committed his low impact changes.
900 kes I removed a size_t from the jcr.h definition.
901 kes Update the tape regression scripts (still to be tested).
902 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
903 kes Require done or quit to exit from in memory tree restore.
905 kes Write install/uninstall of new manpages. There are now a
906 pile of man pages. Some of which need a lot of work.
908 ======================= Warning ==========================
909 The --mandir ./configure option now points to the top level
910 man directory. The man files will be installed under
911 mandir/man8 and mandir/man1 as appropriate.
912 ==========================================================
914 kes Add complete text of GPL to LICENSE.
915 kes Implement job report that indicates where Storage and Pool
916 came from -kes with overrides and Pool storage and NextPool,
917 it is all very complicated.
918 kes Create a few common subroutines for backup.c and migrate.c
919 kes Eliminate warning messages from tray-monitor.c
921 kes Apply fix for scheduler for missing unlock_jobs().
922 kes Clean out autoconf caches before rebuilding configure
923 kes Fix the FreeBSD pthreads lib define updated by Dan.
924 kes Add missing semicolon in src/console/console.c
925 kes Add Robert's enhanced version of build-win32-cross-tools
926 as well as his patch file.
927 kes Note, the new gcc options are likely to break building of
928 wx-console or the tray-monitor ...
930 kes Implement Robert's suggestion to suppress printing compile lines.
931 kes Detect GCC correctly (I hope)
932 kes If using GCC (actually g++) add the following compiler flags
933 -fno-strict-aliasing -fno-exceptions -fno-rtti
935 ===================== Warning =============================
936 Turn on new bsnprintf() code. This could cause print output
938 ===========================================================
940 kes Fix crypto when not using openssl. I previously overlooked this.
941 kes Eliminate crypto type punning problems by eliminating void * and
942 using uint8_t * instead.
943 kes Harden authentication failure in FD by single threading errors
944 and forcing a 6 second wait.
946 ===================== Warning =============================
947 Removed 'Accept Any Volume' directive.
948 ===========================================================
950 kes Major cleanup and simplification of regress using shell functions
951 (more tests to be converted to new format)
952 kes Add detection of 64 bit Irix as indicated by user.
953 kes Increment catalog database id from 9 to 10.
954 kes Add a few of the new database fields to the various C++
956 kes Implement code to fill in the most important new fields (e.g.
958 kes Ensure that most of the new fields are in create/get/insert/update.
959 More work to be done.
961 kes Update some very old licenses in src/cats.
962 kes Modify the database format for handling Migration jobs:
963 Add PriorJobId, RealEndTime to Job table
965 Remove Stripe from JobMedia record (not used, wasting space)
966 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
967 Add Cost to Location table.
968 kes Delete mac_record subroutines.
969 kes Add new table values to create/update/get routines as appropriate.
970 kes Update the update_tables and make_tables scripts.
971 kes Make a first cut in using a union where multiple pointers (actually
972 pointers to pointers) are stored.
973 kes Make some changes to base64.c suggested by Robert and others and add
974 a small amount of documentation.
975 kes Add some changes suggested by Peter for Solaris (bregex...)
976 kes Make runscript.h always built because it needs to be pulled into
977 more places. In particular its RES was left out of a union.
978 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
979 This makes it slightly easier to detect uninitialized variables.
981 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
982 sometimes creates install problems.
983 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
984 Nelson's code. More to do.
985 kes Convert a few store_bit to store_bool in filed_conf.c.
986 kes DVD tweak to block.c as supplied by Uwe Muessel.
988 kes Modify configure.in to check for typeof().
989 kes In findlib/attribs.c use typeof instead of templates if possible.
991 kes Implement partial error messages for src/filed/acl.c
992 kes Fix return code to fail when doing update barcodes and
993 Pool resource is not found. This previously caused Volumes
994 to be labeled as cleaning tapes.
995 kes Small updates to projects.
997 kes Add Eric Bollengier patch for new RunScript directive. It breaks
998 compatibility between dird and fd.
1000 kes Prevent DVD code from rewriting label if the device cannot be
1002 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1003 fix Debian build bug.
1004 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1005 kes Integrate manpages contributed by Jose Luis.
1006 kes Update projects file.
1007 kes Add manpages Makefile.in to configure.in
1008 kes Remove installation of bacula.8 in scripts directory.
1010 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1012 O_NOATIME is a open() flag which makes it possible to read a file without
1013 updating the inode atime (and also without the inode ctime update which
1014 happens if you try to set the atime back to its previous value). It also
1015 prevents a race condition when two programs are reading the same file, but
1016 only one does not want to change the atime. It's most useful for backup
1017 programs and file integrity checkers (and bacula can fit on both
1020 Recent versions of the Linux kernel and glibc have support for it (the
1021 glibc support being mostly copying the O_NOATIME definition to
1022 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1023 it does nothing (since the kernel ignores unknown flags).
1025 If the kernel has support for it, trying to use it either works, fails
1026 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1027 are not either the owner of the file or root). A simple way to prevent the
1028 failure is to open the file without the flag and set it later with
1029 fcntl(F_SETFL), ignoring any EPERM errors.
1030 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1031 of restarted jobs to complete (due to a destroyed pthreads conditional
1032 variable used by the message thread).
1033 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1035 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1036 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1037 colons in query.sql file.
1038 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1039 not to create orphans.
1040 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1041 in restore long listing.
1042 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1043 of incorrect MarkedId.
1044 kes Apply patch from adioso bug #616 to correct text in manual (replace
1045 Director with File daemon).
1046 kes Rework a few of the zlib changes so that they build properly.
1049 kes Move DIR 'run' command to SD before starting the message thread
1050 as suggested by Cristopher Hull to avoid a race deadlock from
1051 two threads using the bsock structure.
1052 kes Modify LICENSE to correct some problems pointed out by Debian.
1054 kes Correct EOF with no \n lex.c problem.
1055 kes Tweak compat.h compat.cpp and merge with apcupsd
1056 kes Add additional INFO messages if autochanger cannot be used.
1059 kes Simplify Win32 Makefile
1060 kes Correct count of buffers/bytes used by smartall.c
1061 kes Updated compat.h after porting apcupsd to MinGW.
1063 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1064 started adding Makefile ...
1065 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1067 kes Reloading a bad configuration file doesn't kill director any more.
1068 Thanks to fix from Eric Bollengier.
1070 kes Fix problem of accents with new Win32 code.
1071 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1072 works in the MinGW build with the exception that there
1073 is a problem with accented characters -kes i.e. there is
1074 some mapping problem with wide characters.
1075 kes The code no longer compiles with Microsoft VC++.
1077 kes Start implementing Christopher's St.Bernard code.
1078 kes Add Christopher's mods for opening files.
1079 kes Strip \r \n from Win32 error messages (Christopher)
1080 kes Add more info about Win32 system if unknown (Christopher)
1081 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1082 kes Fix a number of incorrect strings marked for translation, when
1083 they should not be (e.g. commands).
1084 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1085 Patches supplied by user in bugs #608 and #599.
1086 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1087 listing. This fixes some problems with Win32 printing incorrect
1089 kes Correct the clock shift comm time calculation between the DIR
1090 and the FD. It was added rather than subtracted.
1091 kes Strip all backslashes in filenames to be restored on Win32
1092 machines -kes the names should all be in Unix format, and if
1093 there are any backslashes it is most likely due to an improper
1094 FileSet definition, and the files will not otherwise be
1096 kes Remove lib/regex.c (replaced by bregex.c).
1097 kes Delete src/win32/License.txt
1098 kes Modify installer to install LICENSE
1100 kes Fix bug in build-win32-cross-tools script reported by Howard
1101 kes Implement cross compiled bconsole
1103 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1104 kes Write first cut of README.mingw32
1105 kes Add back ua_label barcode fix from Rufolf Cejka.
1106 kes Integrate the majority of the Mingw cross-tools submission
1107 made by Howard Thomson. Everything compiles, with zlib, openssl,
1108 and VSS turned off. Linking needs a pthreads library ...
1110 kes Add 'Dir Status' button to the gnome console.
1111 kes More work on migration.
1112 kes Restore non-compatible base64 coding to permit compatibility.
1113 kes Display heap stats in Storage daemon without debug level.
1115 kes Integrate most of the MinGW changes -kes more to do.
1117 kes Implement using pg_config for finding PostgreSQL files.
1118 Fixes bug #600. Patch supplied by user.
1119 kes Remove -t option from mktemp in mtx_changer.in and use
1120 working directory. Fixes bug #578.
1121 kes Update job start time after the any run before job so that
1122 files created by the script are only backed up once. Fixes
1124 kes Strip trailing newline only from filenames entered in
1125 the restore command when reading a file. This permits
1126 the user to enter filenames with trailing spaces. Fixes
1127 bug #549. The user supplied a patch that I modified slightly.
1128 kes Use the most recent time (st_mtime, st_ctime) in the dir
1129 command in restore. This gives the user a better idea of what
1130 the newest file really is. This fixes bug #574. The fix
1131 was suggested by the user.
1132 kes Implement a compatible version of base64. This permits external
1133 programs to duplicate Bacula's base64 algorithm using standard
1134 routines. This fixes bugs #296, and 565. Patch submitted by
1136 ================= Note ========================
1137 Previous Signatures stored in the database are no longer
1138 compatible with this. The main downside is for Verify jobs,
1139 and doing an InitCatalog run will fix the problem. Also, the
1140 authentication between the deamons is changed, so all daemons
1141 must be simultaneously upgraded.
1142 ==============================================
1143 If you don't like this fix, set:
1144 const bool compatible = true;
1146 const bool compatible = false;
1149 kes Ensure that DB signature is never NULL.
1150 kes Ensure that DB table names are not translated.
1151 kes Fix scheduler to handle time skew (eg daylight savings).
1152 kes Fix scheduler to use lock_jobs() to avoid most problems
1153 with reload. Window is now milliseconds.
1155 kes Apply patch from Christopher Hull
1156 kes Allow multiple connections to database with different
1158 kes Invalidate the scheduler when doing a reload. Fixes seg
1159 fault, but still 60 second window.
1160 kes Additional info in Reschedule message.
1161 kes Use set_jcr_job_status() everywhere to prevent loss of
1163 kes Display peer IP in FD if error from connecting DIR.
1164 kes Don't increment file count for DIRBEGIN.
1165 kes Replace illegal characters in Win32 filename by _.
1166 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1167 kes Hash hard link filenames rather than linked list.
1168 kes Fix for security failure in chdir on Win32.
1169 kes Add CreateDirectoryA/W win32 API entry points.
1170 kes Add /silent option to Win32 FD for Install/Remove service.
1171 kes Always print Heap statistics in FD.
1173 kes Remove the -f option from the chown in Makefile.in for more
1175 kes Change setting the group in Makefile.in to use chgrp for
1177 kes Implement a write_store and read_store to replace
1178 dirstore in reserve.c
1179 kes Implement a Bacula read/write lock for Python rather
1180 than using the Python lock to avoid recursive problems.
1181 kes Correct the uninstall directory names in filed/Makefile.in
1182 as reported by a user.
1184 kes Correct some problems with database creation (new tables).
1185 kes Replace a bunch of old 0x%x by %p.
1186 kes Get first cut of Migration with Job selection working.
1188 kes Change store_bit() to store_bool() for the Spooling in
1189 dird_conf.c -kes bug reported by Robert Nelson.
1191 kes Correct Makefile bug found by Dan Langille.
1193 kes Correct Makefile for Solaris /bin/sh
1194 kes Correct mtx-changer.in for Solaris /bin/sh
1195 kes Abort if a conf resource does not have a Name =
1197 kes Change the name of the regex program to bregex.
1198 kes Add the bwild program to the tools directory. It is similar
1199 to the bregex program.
1200 kes Implement create bregex.h and bregex.c in src/lib from the
1201 Python regexp program.
1202 kes Use the new bregex.c to implement Regex expressions on Win32.
1204 kes More work on migration.
1205 kes Implement wild program in tools directory for testing
1206 wild-cards. Almost identical to the regex program.
1207 kes Up port VSS single thread locking code.
1208 kes Replace N_(..) by NT_(...) to inhibit translation of
1210 kes Modify Makefile to change the permissions on Working Directory
1211 to 770 if the directory is created.
1212 kes Do not fail the Makefile if changing the permissions or
1213 owner/group on WorkingDir fails.
1214 kes Remove early selection of Scratch Volumes in the recycling
1216 kes Correct the old recycling algorithm so that Scratch Volumes
1217 are selected when looking for a Volume in the changer.
1218 kes Correct a typo in the Verify SQL reported by Joe Park.
1220 kes Remove automatic case folding on Windows FDs. You must
1221 explictly use the 'Ignore Case = yes' option.
1222 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1223 scratch volume in an Autochanger early in the 'recycling'
1226 kes Make weof() and clrerror() methods of class DEVICE.
1228 kes Tweak license to include Microsoft restrictions.
1229 kes Move mysql.reconnect to after real_connect(). Thanks to
1230 Frank Sweetser for the patch.
1231 kes Disallow a backslash in a File = directive (Windows junk)
1232 unless the string is quoted.
1233 kes Apply Eric's patch to ua_label.c so that daemon protocol
1235 kes Add NT_ definition for strings that should not be translated.
1236 kes Apply NT_() to ua_label.c
1237 kes Remove timed wait for VSS on Win2K3 as it is not yet
1239 kes Correct bacula.in script to reference bacula-ctl-xx in the
1240 sysconfig directory rather than the bin directory.
1242 kes Fix a long standing bug in the bacula start/stop scripts.
1243 kes Attempt to add the new bacula-ctl-* files to the rpm.
1244 kes Switch to using typeof() for list traversing to avoid
1245 as many FC5 g++ compiler warnings as possible.
1247 kes Split the bacula start/start script into four files:
1248 bacula -kes starts and stops calling other scripts
1249 bacula-ctl-dir -kes starts/stops the director
1250 bacula-ctl-fd -kes starts/stops the File daemon
1251 bacula-ctl-sd -kes starts/stops the Storage daemon
1253 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1254 kes Correct editing of JobId from int to int64 in fd_cmds.c
1255 kes Eliminate FileSet name race with bash_spaces() and multiple
1256 threads by bashing in a local.
1257 kes Fix error return from 'use storage' to print a correct error
1258 message rather than nothing.
1259 kes Correct false re-read last block error message when two jobs
1260 are simultaneously writing at the end of a tape.
1261 kes Simplify exit conditions in the reserve.c code to avoid
1262 possible non-release of reservation_lock().
1263 kes Suffle lock order in reserve to avoid deadlock between
1264 reservation lock and device mutex.
1266 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1267 tracking this down for me !!!! as it broke the Win32 build.
1269 kes Integrate addition of line count limitation to bsmtp -l from
1270 Sebastian Stark <stark at tuebingen.mpg.de>
1272 kes Implement regex test program in tools directory.
1273 kes Attempt to fix time problem with bsmtp with foreign langs.
1274 kes Add strip_trailing_newline() submitted by user.
1275 kes Implement regex matching in migrate.c
1277 kes Fix bug #537 to allow arbitrary time to mount a volume for
1278 restore, if polling is turned on.
1279 kes If dir_user or dir-group is specified in ./configure apply it to
1280 the working-dir. Fixes bug #533.
1281 kes If rescheduling a job cancel the previous incarnation with the SD.
1282 Fixes bugs #566 and 557.
1283 kes Fix bug #567 do_message() definition type conflict.
1286 kes Add more jcr methods and make mutex and use_count private.
1287 kes Create lock/unlock methods for jcr.
1288 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1289 records to get to seek position.
1290 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1291 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1292 terminates correctly by doing pthread_kill(). Do not destroy
1293 SD cond wait variable between executions of the job. Use local
1294 mutex for cond variable to avoid blocking jcr chain. Fix poor
1295 use of jcr use count in jobq.c for restarted jobs.
1296 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1297 lib/jcr.c -kes prevents locking the jcr chaing.
1298 kes Apply patch from bug #564, which corrects listing volumes with
1299 multiple autochangers. Apply same fix to next volume list.
1300 kes Fix bug #562 where restore bootstrap file is not unique.
1301 kes More details in implementing David's migration syntax proposal.
1302 kes Save and restore dcr when swapping drives so that if we have
1303 a write dcr it is not lost.
1304 kes Use new routine lock_reservations() to lock the reservations
1305 system, and call it while looking for a volume in askdir.c.
1306 This could possibly fix bug #543.
1307 kes Stop SD command loop if job is canceled.
1310 kes Remove old code from findlib/create_file.c
1311 kes Rename mac.c migrate.c
1312 kes Add user friendly display of VolBytes in job report.
1313 kes Rename target... to previous... to make it a bit easier to
1315 kes Add selection type and selection pattern to Migration (idea
1316 given by David Boyes).
1319 kes The po files should now be current.
1320 kes Fix new sql_use_result() code to properly release the
1321 buffers in all cases.
1322 kes Use the keyword ujobid to mean the unique job id; job or jobname
1323 to mean the Job name given on the Name directive, and jobid to
1324 be the numeric (non-unique) job id.
1325 kes Allow listing by any of the above.
1326 kes Add the user friendly job report code for reporting job elapsed time
1327 and rates with suffexes from John Kodis <kodis at comcast.net>.
1328 kes Add Priority and JobLevel as Python settable items.
1329 kes Use TEMPORARY table creation where the table is created by
1331 kes Add new code submitted by Eric for waiting on specific jobid.
1332 kes Add ACL checking for the dot commands.
1333 kes Fix restore of writable FIFOs.
1334 kes Fix a bug in bpipe where the string was freed too early.
1336 kes Modify the Python class examples to inherit object -kes new way
1337 of defining classes. Patch from Felix Schwarz.
1338 kes Implement jobuid to replace old usage of job in keywords as
1339 suggested by Eric Bollengier.
1340 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1341 wait (wait for all jobs to stop)
1343 wait jobuid=unique id
1345 kes Implement write variables for Python to set Priority (anytime), and
1346 Job Level, only during JobInit event.
1348 kes Fix the block listing bug pointed out by Arno.
1349 kes Update the po files at Eric's request.
1351 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1352 accept time qualifiers.
1353 kes Make catalog respect ACL.
1354 kes Add recycle count to Media record.
1356 Changes to 1.39.6-beta1 24Feb04
1358 kes Add Rudolf Cejka's new rc-chio-changer.
1359 kes Implement pulling Volume from Scratch Pool if the
1360 Volume is in the autochanger.
1361 kes Implement additional command arguments for update Volume.
1365 kes Back port changes to 1.38.5
1366 kes Fix recycle SQL for StorageId.
1367 kes Fix misplaced quote in mtx-changer script.
1369 kes Note. Your database must be updated, or you must create
1370 a new database. I have not yet incremented the database level.
1371 kes Add Location table.
1372 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1374 kes Implement create/get mac record in database for adding extended
1375 Migration data to the job record.
1376 kes Add new MAC table to update/make database scripts.
1377 kes Return Storage name used when getting VolumeNames for a job.
1378 kes Change bsr file keyword Storage to Device, which is more accurate.
1379 kes Ensure that Mac records are pruned/purged.
1380 kes Tweak SD tools to deal with changing media type.
1381 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1382 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1383 that the subroutine can switch devices, and hence dcrs.
1384 kes Modify the multiple MediaType read code to re-use the same
1385 dcr when switching devices. This makes the code much more
1387 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1388 from a table for restore.
1389 kes Add Storage name to VolParams, but it really should be Device.
1391 kes Add disk-changer to scripts directory + configure/Makefile
1392 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1393 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1394 kes Implement new store_bool that stores in a bool.
1395 kes Add true/false to yes/no conf directives.
1396 kes Make first cut at changing appropriate store_yesno to store_bool.
1397 kes Complete implementation of Pool storage devices.
1398 kes Move starting clones to job.c
1399 kes Move create_restore_bootstrap_file() to job.c
1400 kes Make copy_storage() more general to be able to handle
1402 kes Cleanup a lot of migration code for manual running, including
1404 kes Move getting a scratch Volume into a subroutine.
1405 kes Make all places a Volume that is added to a pool to
1407 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1408 kes Fix segfault in restore command when no value specified.
1409 kes Start adding code to handle multiple MediaTypes in restore.
1410 kes Eliminate race condition in getting Volume name for
1411 two drive autochanger.
1412 kes More debug code in autochanger.
1413 kes Add storage keyword to bootstrap file, add parsing.
1414 kes Move slot in bsr file into Volume record as there will be
1415 a different slot for each Volume.
1416 kes Create reserve.h
1418 kes Implement Pool storage overrides.
1420 kes Implement first cut of Migration.
1421 kes Implement mysql_use_result() from patch by Karl Hakimian.
1422 This reduces significantly the memory consumption during
1423 the restore tree building, and hence runs faster too.
1424 kes Implement StorageId patch supplied by user (reggie) in bug
1425 #536. This should permit Bacula to work correctly with two
1427 kes Implement Job listing variations suggested by a user.
1428 kes Move updating bootstrap code in backup.c to subroutine
1429 update_bootstrap_file().
1430 kes Add new job status elapsed time and bytes written user
1431 friendly job report output patch sent by John Kodis
1432 <kodis at comcast.ne>.
1433 kes Implement a storage list in Pools.
1434 kes Separate out setup_job() code from run_job().
1435 kes Get migration working -kes lots of changes in mac.c in both
1437 kes Apply patch from user (Eric Bollengier I think) that fixes a
1438 DIR crash when no arguments are supplied to a dot command.
1439 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1440 kes Fix command arg name->volume in label command of gnome-console.
1441 kes Fix SD acquire.c to release correct DCR by explicitly testing
1442 on the dcr address rather than trying to devine if it is a read
1443 or write dcr. This failed in error conditions when the device was
1447 kes Apply user supplied patch for more readable rate output
1449 kes Continue implementing migration.
1450 kes Implement support for removable filesystems in SD.
1451 kes Ensure that btraceback scripts can be read by anyone.
1452 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1453 kes Correct bug where canceling restore before the FD contacts
1454 the SD causes the drive to be left in read mode.
1455 kes Move ofline_or_rewind into DEVICE::close().
1456 kes Eliminate close_device.
1457 kes Convert several dev subroutines to methods (e.g. bsf,
1459 kes Eliminate force_close_device().
1460 kes Implement Device Type directive in Device resource that
1461 can have values File, Tape, Fifo, DVD, or Prog.
1462 kes Add has_cap() method to Device.
1465 kes Add patch from bug #527 to allow RedHat user to specify
1466 options/user/group for starting each daemon in
1467 /etc/sysconf/bacula.
1469 kes Add two new queries to query.sql provided by Arno. One
1470 list volumes known to the Storage device, and the other
1471 lists volumes possibly needing replacement (error, ...).
1473 kes Add periodic (every 24 hours) garbage collection of memory
1474 pool by releasing free buffers.
1476 kes Correct bug counting sized (for display only) in smartall.c
1477 kes Print FD mempool stats if debug > 0 rather than 5.
1479 kes Make db_lock() mutex error fail the job rather than abort
1480 Bacula. Canceling the job caused the mutex to fail.
1481 kes Correct bug in alist.c that re-allocated the list if the
1482 number of items goes to zero.
1483 kes Move the reservation system thread locking to the top level
1484 so that one job at a time tries all possible drives before
1486 kes Implement a reservation 'fail' message queue that is built
1487 and destroyed on each pass through the reservation system.
1488 These messages are displayed in a 'Jobs waiting to reserve
1489 a drive' list during a 'status storage='. Note, multiple
1490 messages will generally print for each JobId because they
1491 represent the different problems with either the same drive
1492 or different drives. If this output proves too confusing
1493 of voluminous, I will display it only when debug level 1
1494 or greater is enabled in the SD.
1496 kes Add enable/disable job=<job-name>. This command prevents
1497 the specified job from being scheduled. Even when disabled,
1498 the job can be manually started from the console.
1499 kes During 'update slots' clear all InChanger flags where the
1500 StorageId is zero (old Media records).
1502 Beta release 1.38.4:
1504 kes Fix autochanger code to strip leading spaces from returned
1505 slots number. Remove bc from chio-changer.
1506 kes Back port a bit of 1.39 crypto code to reduce diffs.
1507 kes Fix first call to autochanger that missed close()ing the
1508 drive. Put close() just before each run_program(). Fixes
1511 kes Add PoolId to Job record when updating it at job start time.
1513 kes Pull in more code from 1.39 so that there are fewer file
1514 differences (the new ua_dotcmds.c, base64.h, crypto.h
1515 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1516 util.c. Aside from ua_dotcmds.c these are mostly crypto
1518 kes Implement new method of walking the jcr chain. The
1519 incr/dec of the use_count is done within the walking
1520 routines. This should prevent a jcr from being freed
1521 from under the walk routines.
1526 kes Start implementing Verify list output.
1527 kes Move the suitable_drive flag to a better place to prevent
1528 premature termination of the reservation if all drives
1529 are busy -kes should fix Arno's diff/inc pool failures.
1531 kes Add mutex to single thread VSS code in Win32.
1533 kes Simplify code in askdir.c that waits for creating an appendable
1534 volume so that it can handle multiple returns from the wait
1536 kes Modify the wait code to permit multiple returns.
1537 kes Return a zero when 'autochanger drives' is called and
1538 it is not an autochanger.
1539 kes Make rewind_dev() a method taking a DCR as an argument.
1540 This permits closing and reopening the drive if the
1541 rewind fails as happens if the drive was loaded while the
1542 file descriptor was open. This refreshes the file descriptor.
1543 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1544 if the device is open or not. This should eliminate
1546 kes Return error if reserve cannot find at least one suitable device.
1547 kes Make wait_for_sysop() return correct state information.
1548 kes Fix Win32 state file problem. write was not using compat
1549 code. This should fix bug #500.
1551 kes Modify gui on command to set only GUI mode and not batch.
1552 kes Modify .messages command to always print messages regardless
1554 kes If GUI mode is on, suppress automatic printing of
1556 kes Delete old bnet packet code.
1557 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1558 wx-console. -kes not implemented because bconsole must be updated.
1559 kes Modify restore command in wx-console to set gui on and to use
1560 only .messages instead of messages. Hopefully this fixes bug
1562 kes Fix seg fault in exit of acquire when canceling a job --
1563 reported by Wolfgang Denk
1564 kes Pull in latest reservation system changes from 1.38
1565 kes Make .messages command always print messages regardless
1566 of the automessages flag.
1568 kes Fix seg fault if user labels a drive directory bug #513
1569 kes Remove quotes around Version as it breaks things.
1571 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1572 kes Apply sparse code fix for raw drives and fifos. Bug 506
1573 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1575 kes Correct reservation system to do a last ditch try
1576 for any mounted volume, then anyone anywhere.
1577 kes Add quotes around table Version because of
1578 error in MySQL 4.1.15 -kes bug report submitted.
1579 kes Correct some minor problems with btape in the fill
1581 kes Updates to ssh-tunnel from Joshua Kugler.
1582 kes Added a report.pl program from Jonas Bjorklund.
1583 kes Simplify the O_NONBLOCK open() code for tape drives,
1584 and always open nonblocking.
1585 kes Do not wait for open() if EIO returned (shouldn't happen).
1586 kes Eliminate 3 argument to tape open().
1587 kes Correct the slot # edited in the 3995 Bad autochanger unload
1589 kes With -S on bscan (show progress) do not divide by zero.
1591 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1592 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1593 kes Remove unused code in wait_for_device.
1594 kes Make wait_for_device() always return after 60 seconds of wait.
1598 kes Add stubs for non-crypto build.
1600 kes Use localhost if no network configured
1602 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1603 kes Remove debug print.
1604 kes Add bail_out in error during state file reading.
1606 kes Merge changes made to 1.38.3 into HEAD
1607 kes Add stubs for pygtk-console code
1608 kes Create Makefile.in for pygtk-console code
1610 kes Merge updates into 1.38 branch
1611 kes Update specs to include mysql4 define.
1612 kes Fix when attributes are sent, must be after binit().
1613 kes Stop read_record() if status not ok in second loop.
1614 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1615 and partial records in read_record(). This allows bscan
1616 to get FileIndex at EOT correct.
1617 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1619 kes Fix Win32 built to work with new crypto code.
1620 kes Apply patch supplied by user (slightly modified) to fix
1621 correct detection of holes in block devices and FIFOs.
1623 kes Apply patch supplied by user (slightly modified)
1624 to fix SD hang with multiple pools and bad client
1625 IP. Fixes bug # 508.
1627 kes Add nagios plugin to the examples directory. Submitted by
1629 kes Remove warning message about multiple saves of hardlinked files
1630 from find_one.c as it can generate too many warning messages.
1631 kes Modify most restore error messages to be queued so that they
1632 appear at the end of the job rather than mixted with the restore
1633 listing where they could be 'lost'.
1635 kes Reset timeout values before select() per patch from
1636 Frank Sweetser for problems with non-blocking sockets.
1637 kes Unlink the state file if either reading or writing it gets
1638 errors. Hopefully this will fix Win32 exit problems.
1639 kes Add sanity check in append.c to ensure that dcr is not NULL.
1640 This can happen if multiple drive autochanger SCSI control
1641 channel and drive indicies do not correspond.
1643 kes Get next volume from Scratch pool before creating a volume.
1644 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1645 kes Remove argument from create_bacula_database for SQLite as it
1647 kes Add back index code so that two drive autochangers can get
1649 kes Change a bunch of debug levels to aid debugging autochangers.
1650 kes Fix reservation so that mutexes are properly applied.
1651 kes Rework reservation algorithm so that two drives can be used
1654 kes Landon merged his data encription changes into the HEAD
1655 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1656 If this patch is applied, the number of days can be specified with
1657 'list nextvol days=xx'
1659 'status dir days=xx'
1660 My use case is to be able to preview the next scheduled job (and the
1661 next tape to be used) on fridays if there are no scheduled jobs during
1665 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1666 kes Fix malformatted bnet error message that caused seg fault
1668 kes Applied user patch to improve README.vc8 in src/win32.
1670 kes Add Migrate, Copy, Archive Job types (some where there)
1671 kes Correct some more editing of JobId's (for 64 bit compatibility).
1672 kes Ensure that StorageId is stored in Media record when ever possible.
1673 kes Add Migration Job to Job.
1674 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1675 Next Pool to Pool resource.
1676 kes Add more code to mac.c (migration archive copy).
1677 kes Change Start Storage daemon job to require read and write storage
1679 kes Pass read storage data to SD as well as write storage data.
1680 kes Remove old code from winservice.cpp
1681 kes Break on error in scan.
1682 kes Fix typo in signal.c
1683 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1684 kes Cleanup how find_device() works.
1685 kes Add read output to Status in SD.
1688 kes Add red-black btree routines
1690 kes Remove abs() in bfile.c so that it compiles on Solaris.
1693 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1694 kes Fix bnet-server bug found on OpenBSD. Bug #486
1695 kes Fix cancel failure bug. Bug #481
1696 kes Fix failure when Pool name has spaces. Bug #487
1697 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1698 kes Fix a couple of free()s in src/filed/acl.c
1699 kes Fix memory overrun in bfile.c in building OS X resource
1700 fork filename. Bug #489
1701 kes Add Pool name to SD status output.
1703 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1704 kes Make sure to set storage before trying to set drive.
1705 kes Add bacula_mail_summary.sh to examples directory. It makes
1706 a single email summary of any number of jobs. Submitted
1708 kes Make sure when we do a mount to unblock the device even
1709 if the drive could not be opened.
1711 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1712 and correct a few minor problems to make it build on Linux.
1714 kes Remove delete of CVS from all Makefiles
1715 kes Fix seg fault when clicking on Add button in wx-console
1716 restore panel. Bug #470.
1717 kes Fix copyright date and URL typo -kes bug #468.
1718 kes Change autostart install for FreeBSD to look for rc.conf
1719 rather than rc.local as suggested fix for bug #466.
1720 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1721 grant on status. Bug #465
1722 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1723 update script. Bug #464
1724 kes Tweak #ifdefing a bit in new Win32 stream code.
1725 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1726 kes Add documentation of performance #defines
projects / bacula / bacula / blob