1 Technical notes on version 1.39
5 kes Enhance error message when restoring without bootstrap file.
6 kes Check restored size only for regular files.
7 kes Store Python job level in job record in Dir.
8 kes Add back code to open tape device nonblocking, but if rewind fails
9 release file descriptor.
10 kes Modify acquire.c to first try autoloading the device. Also, ask operator
11 to mount tape if drive cannot be opened.
13 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
15 kes Fix a compiler warning in compat.cpp
16 kes Change strcpy to bstrncpy in compat.cpp
17 kes Remove some broken code in bdb_list.c
18 kes Fix, hopefully the last, ACL problem in the restore command.
19 kes Update the README.mingw32
20 kes Add new version of upgrade-win32-client.txt to examples directory.
21 Submitted by Michel Meyers.
22 kes Print an INFO message in the job report when a Volume is marked Purged.
24 kes Apply the recycle patch from Richard Mortimer.
25 kes Convert a few if statements in dev.c to switch statements.
26 kes Start using print_errmsg instead of bstrerror().
27 kes Print a job message in SD when a job is marked to be canceled.
29 kes All code added back. Fixed block.c read/write to loop only 3
30 times. This apparently keeps the OS from crashing (at least
32 kes The kernel bug still persists. Backup something then immediately
33 do a bscan on the same tape, and the kernel will crash.
34 kes Simplifed tape open(). It no longer uses nonblocking mode, which
35 means that opening with no tape loaded will probably take at least
36 6 minutes before an error is reported.
37 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
38 when doing set_os_device_parameters.
39 kes Report open error in mount.c
40 kes Remove all .exe files from the installer directory on make clean.
42 kes Start adding back removed code.
43 kes Back out a number of changes because backups to tape crash my
45 kes Remove the inetd code from the File daemon.
47 kes Add -c option to pg_dump so that it initializes tables when
49 kes Fix FirstWritten time on Volume to be obtained from SD so that
50 it is the actual time the volume was first written.
51 kes Minor Makefile changes.
52 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
53 ebl Add yes keyword to prune/purge command
55 kes Correct a test in block.c that prevented restore of a DVD from
56 looking at the last part in the spool directory.
57 kes Make some error messages clearer mostly by using the word DVD
58 in the message. Improve infor message in read_record for DVDs.
59 kes Remove DVD kludges in dircmd.c label/relabel.
60 kes Move the dvd relabel code from dircmd.c into
61 write_new_volume_label_to_dvd() adding a relabel argument.
62 kes Rewrite the truncate_dvd() code to be much simpler and
63 more logical. First blow away any spool part, then create a
64 new empty part and write to the DVD.
65 kes Rewrite the can_write_on_non_blank_dvd() code making it
66 only ensure that no valid data is on the DVD -- i.e. it
69 kes Minor Makefile fixes.
70 kes Put attach_dcr_to_dev in a subroutine.
71 kes Make attaching/detaching to/from a device use a flag and
72 only detach if actually attached.
73 kes Add dvd-simulator.in to scripts directory and add to configure.
74 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
75 This could be a cause of a number of drive reservation problems.
76 Note, this code is now in attach_dcr_to_dev().
77 kes Suppress doing Volume updates if it is a system job. This should
78 prevent the DVD label blocking.
79 kes Clear the freespace ok flag in a couple of strategic places.
81 kes Put removing zero sized spool part file in subroutine and
82 call from release_device().
83 kes Add Richard's patch for relabel to dircmd.c, but save and restore
85 kes Rework a lot of subroutines in dev.c to take dcr as an
86 argument. This is done to eliminate the usage of attached_dcrs
88 kes Change truncated_dvd to blank_dvd, which seems more suitable.
89 kes Apply most of Richard Mortimer's truncate patch.
90 kes Create lseek() method for DEVICE that takes dcr as an
91 argument. This is to eliminate the use of attached_dcrs in
92 lseek(). The calls to lseek_dev() must still be changed.
94 kes Apply Richard Mortimer's patches for printing an error
95 message in btape when a DVD is used, and to initialize traceback.
96 kes Added error message to btape when trying to access a file.
97 kes Move prototype of update_slots() to protos.h.
99 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
100 and FDJobStatus to the Director Python variables.
101 kes Make sure valid argument passed to str_to_utime() where Arno
103 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
104 I.e. part of two different patches.
106 kes Modify disk changer to simulate some of the error conditions
108 kes Make sure the close() call in the SD tools is just before the
110 kes Implement dir_get_volume_info() in bls using the patch from
111 Richard Mortimer but call find_num_dvd_parts().
112 kes Implement find_num_dvd_parts() that mounts and scans a DVD
113 and counts the parts.
114 kes Move the omode code in open_dvd() up so that the cannot
115 write on blank disk can check can be bypassed for read mode.
118 kes Disable normal data spooling for DVD writing which uses
119 a different spooling mechanism.
120 kes Apply patch from Richard Mortimer to ensure that the number
121 of DVD parts is correctly updated.
123 Version 1.39.22 beta released:
125 kes Fix logic error in handling error return from mtx-changer
127 kes Make status from SD aware of -1 (unknown) Slot status.
128 kes At Eric's suggestion make both the "slots" and "drive" commands
129 to the Storage daemon work even if the drive is busy.
130 kes Make two separate Win32 menu links for starting bconsole and
131 wx-console in winbacula.nsi
132 kes Apply DVD part_spooled patch from Richard Mortimer
133 richm@oldelvet.org.uk
134 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
135 rbn Fixed problems migrating settings from previous releases in
136 Win32 installer. Add Readme.txt with an option to show it on
137 the installer Finish page.
139 kes Use get_catalog_resource() to open catalog database
140 to ensure that ACLs are respected and that user is
141 correctly prompted for database.
142 kes Integrate multiple console/director patch from
143 Carsten Paeth calle@calle.in-berlin.de
144 ebl Add character substitution in Job/JobDefs WriteBootStrap.
145 You can use now 'WriteBootStrap = "/path/%c_%n.bsr"'
146 kes Apply patch supplied in bug #656 to pass priority field
147 in the run dialog to the Director in gnome console
148 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
149 this will fix bug #627 where Bacula eventually gets
150 confused about what Volume it wants.
151 kes Add a new close_part() class in the SD to save the device
152 state around open/close_part/open for DVD writing. This
153 should fix the num_dvd_parts getting zeroed as reported by
155 kes Apply patch from Richard Mortimer that correct edit code
156 for debug output of st_size.
157 ebl Add support of encrypted data stream to bscan.
158 display data_len instead of data content (may be binary)
160 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
161 bcopy. Fixes bug #669 reported by Eric.
162 kes Fix incorrect number of arguments in SQL statement in
163 sql_get.c as reported by Eric.
165 kes Update examples directory.
166 kes Remove unused variable in winservice.cpp
167 kes Make Win32 make command build installer.
169 kes Correct dvd code that breaks tape labeling.
170 kes Implement Enabled on update slots.
172 kes When doing a label, pass the VolBytes back to the Director,
173 which puts it in the catalog.
174 kes Print an error message if the user attempts to prune an
176 kes Need to start using %ld when sscanfing 32 bit values.
178 kes Correct the counting of VolCatBytes for DVDs.
179 kes Add code to mount.c to require that VolCatBytes corresponds to
180 what is actually found when doing an append.
181 kes Update freespace only after writing on the DVD.
182 kes Remove code that blows away the current part in the spool file.
184 kes Apply new dvd-handler patch from Richard Mortimer.
185 kes Tweak so that debug level 20 shows only DVD commands.
186 kes Correct spooled_part flag in dev.c close() so that it is cleared
187 when the spool file is deleted or does not exist.
188 kes Print part number in read_records when eof hit (restore).
190 -es Make find with no args in tree restore return error rather than
191 stopping the selection. Fixes bug #665
192 kes Rework DVD writing to ensure that the last part is written
193 on open_next_part when dealing with a spool file.
194 kes Correct the lseek_dev() routine to handle end point correctly
195 (bug introduced by me).
196 kes Allow part number to exceed num_dvd_parts in lseek_dev().
198 kes Apply dvd-handler patch from Richard Mortimer.
199 kes Apply dvd error check patch from Richard Mortimer.
200 kes Apply bpipe race patch from Richard Mortimer.
201 kes Rework how DVD labels are handled and set append only
202 when part > num_dvd_parts.
204 kes Rework many features of DVD writing and reading. Added many error
205 messages. Most importantly changed part to represent the current
206 part number base zero. This makes current DVD writing incompatible
207 with previous version.
209 kes Add host:port to connect failure messages to FD and SD from Dir.
210 kes Add WhereACL to console ACL list. If nothing is specified, only
211 the default is permitted for restore. Otherwise, *all* allows any
212 path, or you can specify permitted paths. This should allow control
213 over where users can restore files. This is untested.
214 kes Modified message to add a ? (as in loaded?) when querying the autochanger
215 for what Slot is loaded.
216 kes Fixed the use of Slot, so that is more correctly maintained, thus
217 eliminating unneeded duplicate calls to determine what Slot is loaded.
219 kes Install man pages with 'make install'
220 kes wx-console crashes because of differences between Bacula and wxWidgets
221 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
223 kes correct improper indenting in wx-console/console_conf.c
224 kes update wx-console header copyrights
225 kes Fix bug #658 where wx-console mangles file/directory names containing
228 kes Add Media.Enabled flag to client backups for dotcmds.c
229 kes Enforce Media.Enabled=1 for a current restore to work.
230 kes Require restore case 3 to have sqlquery permission to work.
231 kes Remove obsolete del_MAC sql command.
232 kes Ensure that bscan creates Volumes with Enabled=1.
234 Version 1.39.20 beta released:
236 kes Correct missing Client table reference in SQL pointed out by
239 kes Fix Win32 build (new entrypoint, start baculafd).
241 kes Add -n option to bconsole to turn off conio.
242 kes Print JobIds to be migrated in Job Report.
243 kes Add additional user supplied notes to the messages part of
244 bacula-dir.conf concerning multiple email addresses.
245 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
246 kes Add more recent Feature requests to Projects file.
248 kes Apply Maritn's fix to src/win32/Makefile.
249 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
250 kes Implement pruning for Migration and migrated jobs.
251 kes Implement PoolOccupancy migration.
252 kes Implement PoolTime migration.
254 kes If doing a mount, look for a slot, and if specified pass it to
255 the SD so that it can load the autochanger.
256 kes Return DVD=1 flag if a label command is done to a DVD. This
257 permits setting VolParts to 1.
258 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
259 rework ua_label code based on DVD media type to use DVD flag returned.
261 kes Eliminate some compile warnings in dird_conf.c
262 kes Format the bytes field in the terminated jobs part of the status
263 command for the three daemons with suffixes to reduce print size
264 of backup bytes. Suggested by a user.
265 kes When not descending into a directory, print the File= name that
266 triggered it -- makes why not descending a bit clearer.
267 kes Do not unload autochanger when doing a list command -- basic code
268 from Eric Bollengier.
270 kes Fix bug #462 incorrect error message printed when client script called
271 from File= was not found.
272 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
273 do a rewind on Solaris when no tape is in the drive (Solaris does not
274 have the detailed errno found on Linux). Added Solaris specific code.
275 Note, this may apply to other OSes as well.
277 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
278 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
279 fix bug 648 - update sqlite script patches, lock out gnome2console
280 builds for platforms with gtk+ < 2.4.
281 Updated build_rpm.sh - add remote source directory, add switch for
282 signing, refine file names.
283 Updated spec file again for Mandriva build as they have this curious
284 custom of silently converting all manpages to bzip2 format just before
285 the final packaging step.
287 rbn Fixed the Windows Makefiles so that they won't accidentally try and
288 pickup binaries for the Unix build. This allows both the Unix
289 build and the Windows build to be built in the same tree without
290 interfering with each other.
291 rbn Fixed error handling and cleaned up mtx-changer.cmd.
292 rbn Added the rest of the database scripts. These are installed but are
293 not yet edited for variable replacement.
294 rbn Broke out the cats functionality from bacula.dll and put into new
295 separate dlls for each database type. At installation time the
296 correct one is copied to bacula_cats.dll.
297 rbn Eliminate the need to install the mysql.dll on client only builds.
298 rbn Moved dird/sql_cmds.c into the cats directory so all the database
299 specific #ifdefs were in the cats directory.
300 rbn Added a new sql_cmds.h with all the declarations for the variables
301 exported from sql_cmds.c.
302 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
303 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
305 kes Correct improperly formatted list command output reported by Dan.
307 kes Correct despool time calculation.
309 kes Remove previous changes to compat.cpp as they create problems.
310 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
311 kes Attempt to fix problems with the msg_queue crashing on Solaris
312 when Bacula is terminating, but problems remain.
313 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
314 name editing problems with too many \\?\es.
315 kes Fix some Bacula source code style problems in compat.cpp.
316 kes Add debug code to compat.cpp and convert non-Bacula debug code
319 kes Change the name of the technical notes file from kes-1.39 to
320 technotes-1.39. Prefix my messages with 'kes '.
321 kes Allow dequeue_messages() to be called twice. Should fix bug
323 kes Add Job type to bscan Job information output.
325 kes Update copyright date in program files, and for the most part
327 kes Implement %q in bsnprintf.c apparently I forgot it.
329 kes Make disk-changer sed command compatible with FreeBSD.
330 kes Make a first cut at a ReleaseNotes and ChangeLog for a
332 kes Make make clean descend into the src/win32 directory.
333 kes Fix some #ifdefing so that Solaris and FreeBSD compile
334 sys/stat.h was turned off.
335 kes Use suffix editing for new transfer rate messages.
336 kes Attempt to come up with a workaround which seems to be an OS
337 bug where write() returns EBUSY. IMO this should not happen.
338 It triggered in truncatebug test. The workaround retries using
340 kes Eliminate a strerror() call in a class method that failed with
342 kes Use rm -rf rather than rmdir to delete the src/win32/release
343 directory during make clean.
345 kes Make bscan ignore ACL streams.
346 kes Update projects files with new Feature Requests.
347 kes Generate current English and French manuals and upload
349 kes Update the home page to include the new British/French flags to
350 switch between translations. Work done by Alexandre Baron.
351 kes Make disk-changer script print an error message if the changer
352 directory is not defined.
353 kes Create a generic DB routine for getting an int (32/64 bit) from
355 kes Add more migration code.
356 kes Add a few more files to .cvsignore here and there.
357 kes Minor fixes for SD write rate and despooling rate.
358 kes Turn off new test code in src/console.c
362 kes Incremented the version number to signify that all of Robert's code
363 for Win32 that was in the branch is now integrated into the HEAD,
364 and that Eric has submitted code that we hope will provide limited
365 backward compatibility with 1.38 file daemons (more testing to be
367 kes I rationalized a few of the names of the variables (mainly jcr names)
368 that are used during migration as keeping three different jcrs at the
369 same time clear in ones head is not easy.
373 eb Tweak new runscript feature to work with 1.38.x FDs.
374 eb Correct crypto.c to fix segfault when restoring an encrypted stream
375 on fd which don't use rsa keys.
376 eb Add yes/no English keywords on localized yes/no questions.
378 kes Several important commits from Robert Nelson for code cleanup and
380 kes Modify console.c so that when conio is enabled, it converts \n to
381 \n\r before outputting to the console. Hopefully this will fix
382 the problems with expect in Perl that Eric saw.
384 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
386 kes Add Comment field to llist of a volume.
387 kes Allow true/false in some yes/no questions.
388 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
389 kes Remove a few /n's when scanning commands from another daemon. This
390 permits adding additional fields later.
391 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
392 kes Update README.mingw
394 kes Tweak authentication to work with 1.38.x FDs.
395 kes Tweak catalog make scripts.
396 kes Fix catalog upgrade scripts so that they work.
397 kes Correct despooling debug code to eliminate race condition.
399 kes Add additional fields as specified by Arno to LocationLog.
400 kes Add comment field to the Media record.
401 kes Add Time field to the Log record.
402 kes Correct migration SQL (thanks to Bill Moran) so that it
403 runs with PostgreSQL also.
404 kes Add spooling/despooling info in status output of SD.
406 kes Spend a lot of time integrating mkcdrec with the rescue disk.
407 kes Add VOLMGMT message class for volume management messages (none yet).
408 kes Add CATALOG as a destination. It goes into the LOG table.
409 kes Implement the Log table in the DB.
410 kes Implement the Location Log table in the DB (for user use).
411 kes At Eric's request add a run_scripts() just after blast_data in
414 kes Add Enabled column to Location, correct some typos in DB schemas.
415 kes Correct bug I introduced into RunScripts enum.
416 kes Add log table to Catalog
417 kes Purge original job migrated if the migration terminates normally.
418 kes Cleanup purging of files/jobs so that it is done only in a
420 kes Add new VOLMGMT message class.
421 kes Add Catalog message destination (user conf code remains to be written).
423 kes Modify read_record and friends to properly deal with migration
425 kes Update debug code in read_record.
427 ======================= Warning ==========================
428 Separate read and write storage in Jobs in the Director. This
429 is a major rewrite of some of the low level code and hence has
430 a high probability of introducing bugs.
431 ==========================================================
433 kes Move the job init code up to *before* the job is put into
434 the job queue (resource allocation queue). This permits the
435 job to establish whether it will read or write or do both.
436 kes Add name() methods to all the resource classes.
437 kes Implement separate read and write storage resource
438 allocation/deallocation in jobq.c
440 ======================= Warning ==========================
441 Implemented new method of getting the default Storage from the Media
442 record rather than from the MediaType for restore. As a fall
443 back, if no Storage is defined, use the MediaType. This
444 eliminates most all prompts if there are multiple MediaTypes
445 used. This is an important and fundamental change.
446 ==========================================================
448 kes Add more detail (Storage, Device) to list of volumes printed
450 kes More code in migrate. In particular start multiple jobs if
452 kes Probably overkill, but ensure that the bsr is unique even within a
454 kes Rework bsys.c drop() so that it now should work as expected.
455 kes Update a bunch of old copyrights -kes particularly in .h files.
456 kes Remove src/lib/bshm.c/h
460 ======================= Warning ==========================
461 All hash codes in the database are now kept in world
462 compatible base64 format (no = filling). This means that
463 all FileSets will be updated and if you are running
464 verify jobs, you must do an InitCatalog.
465 Authentication uses the new algorithm, but should be
466 backward compatible with 1.38.x
467 ===========================================================
469 kes Modify the authentication routines so that the 1.39.15 Director
470 always runs with the compatible binary to base64 code (same as
471 the rest of the world). It will however detect if an SD or
472 FD is running the old code and if that is the case, will use
473 the old algorithm for authentication. However, all consoles must
474 use the compatible algorithm, and all data entered into the database
475 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
476 use the compatible algorithm.
477 kes Rename the cram_md5 routine names to be slightly more appropriate
478 to what they are doing (challenge and respond).
479 kes Robert committed his #ifdef and header cleanup.
481 kes Fix a compiler warning in files/backup.c
482 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
484 kes Robert committed his low impact changes.
485 kes I removed a size_t from the jcr.h definition.
486 kes Update the tape regression scripts (still to be tested).
487 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
488 kes Require done or quit to exit from in memory tree restore.
490 kes Write install/uninstall of new manpages. There are now a
491 pile of man pages. Some of which need a lot of work.
493 ======================= Warning ==========================
494 The --mandir ./configure option now points to the top level
495 man directory. The man files will be installed under
496 mandir/man8 and mandir/man1 as appropriate.
497 ==========================================================
499 kes Add complete text of GPL to LICENSE.
500 kes Implement job report that indicates where Storage and Pool
501 came from -kes with overrides and Pool storage and NextPool,
502 it is all very complicated.
503 kes Create a few common subroutines for backup.c and migrate.c
504 kes Eliminate warning messages from tray-monitor.c
506 kes Apply fix for scheduler for missing unlock_jobs().
507 kes Clean out autoconf caches before rebuilding configure
508 kes Fix the FreeBSD pthreads lib define updated by Dan.
509 kes Add missing semicolon in src/console/console.c
510 kes Add Robert's enhanced version of build-win32-cross-tools
511 as well as his patch file.
512 kes Note, the new gcc options are likely to break building of
513 wx-console or the tray-monitor ...
515 kes Implement Robert's suggestion to suppress printing compile lines.
516 kes Detect GCC correctly (I hope)
517 kes If using GCC (actually g++) add the following compiler flags
518 -fno-strict-aliasing -fno-exceptions -fno-rtti
520 ===================== Warning =============================
521 Turn on new bsnprintf() code. This could cause print output
523 ===========================================================
525 kes Fix crypto when not using openssl. I previously overlooked this.
526 kes Eliminate crypto type punning problems by eliminating void * and
527 using uint8_t * instead.
528 kes Harden authentication failure in FD by single threading errors
529 and forcing a 6 second wait.
531 ===================== Warning =============================
532 Removed "Accept Any Volume" directive.
533 ===========================================================
535 kes Major cleanup and simplification of regress using shell functions
536 (more tests to be converted to new format)
537 kes Add detection of 64 bit Irix as indicated by user.
538 kes Increment catalog database id from 9 to 10.
539 kes Add a few of the new database fields to the various C++
541 kes Implement code to fill in the most important new fields (e.g.
543 kes Ensure that most of the new fields are in create/get/insert/update.
544 More work to be done.
546 kes Update some very old licenses in src/cats.
547 kes Modify the database format for handling Migration jobs:
548 Add PriorJobId, RealEndTime to Job table
550 Remove Stripe from JobMedia record (not used, wasting space)
551 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
552 Add Cost to Location table.
553 kes Delete mac_record subroutines.
554 kes Add new table values to create/update/get routines as appropriate.
555 kes Update the update_tables and make_tables scripts.
556 kes Make a first cut in using a union where multiple pointers (actually
557 pointers to pointers) are stored.
558 kes Make some changes to base64.c suggested by Robert and others and add
559 a small amount of documentation.
560 kes Add some changes suggested by Peter for Solaris (bregex...)
561 kes Make runscript.h always built because it needs to be pulled into
562 more places. In particular its RES was left out of a union.
563 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
564 This makes it slightly easier to detect uninitialized variables.
566 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
567 sometimes creates install problems.
568 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
569 Nelson's code. More to do.
570 kes Convert a few store_bit to store_bool in filed_conf.c.
571 kes DVD tweak to block.c as supplied by Uwe Muessel.
573 kes Modify configure.in to check for typeof().
574 kes In findlib/attribs.c use typeof instead of templates if possible.
576 kes Implement partial error messages for src/filed/acl.c
577 kes Fix return code to fail when doing update barcodes and
578 Pool resource is not found. This previously caused Volumes
579 to be labeled as cleaning tapes.
580 kes Small updates to projects.
582 kes Add Eric Bollengier patch for new RunScript directive. It breaks
583 compatibility between dird and fd.
585 kes Prevent DVD code from rewriting label if the device cannot be
587 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
588 fix Debian build bug.
589 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
590 kes Integrate manpages contributed by Jose Luis.
591 kes Update projects file.
592 kes Add manpages Makefile.in to configure.in
593 kes Remove installation of bacula.8 in scripts directory.
595 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
597 O_NOATIME is a open() flag which makes it possible to read a file without
598 updating the inode atime (and also without the inode ctime update which
599 happens if you try to set the atime back to its previous value). It also
600 prevents a race condition when two programs are reading the same file, but
601 only one does not want to change the atime. It's most useful for backup
602 programs and file integrity checkers (and bacula can fit on both
605 Recent versions of the Linux kernel and glibc have support for it (the
606 glibc support being mostly copying the O_NOATIME definition to
607 bits/fcntl.h). If there's no support for it on the kernel, trying to use
608 it does nothing (since the kernel ignores unknown flags).
610 If the kernel has support for it, trying to use it either works, fails
611 silently (mostly in remote filesystems), or returns errno=EPERM (if you
612 are not either the owner of the file or root). A simple way to prevent the
613 failure is to open the file without the flag and set it later with
614 fcntl(F_SETFL), ignoring any EPERM errors.
615 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
616 of restarted jobs to complete (due to a destroyed pthreads conditional
617 variable used by the message thread).
618 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
620 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
621 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
622 colons in query.sql file.
623 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
624 not to create orphans.
625 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
626 in restore long listing.
627 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
628 of incorrect MarkedId.
629 kes Apply patch from adioso bug #616 to correct text in manual (replace
630 Director with File daemon).
631 kes Rework a few of the zlib changes so that they build properly.
634 kes Move DIR "run" command to SD before starting the message thread
635 as suggested by Cristopher Hull to avoid a race deadlock from
636 two threads using the bsock structure.
637 kes Modify LICENSE to correct some problems pointed out by Debian.
639 kes Correct EOF with no \n lex.c problem.
640 kes Tweak compat.h compat.cpp and merge with apcupsd
641 kes Add additional INFO messages if autochanger cannot be used.
644 kes Simplify Win32 Makefile
645 kes Correct count of buffers/bytes used by smartall.c
646 kes Updated compat.h after porting apcupsd to MinGW.
648 kes Work on getting wx-console building on MinGW. wxWidgets now builds
649 started adding Makefile ...
650 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
652 kes Reloading a bad configuration file doesn't kill director any more.
653 Thanks to fix from Eric Bollengier.
655 kes Fix problem of accents with new Win32 code.
656 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
657 works in the MinGW build with the exception that there
658 is a problem with accented characters -kes i.e. there is
659 some mapping problem with wide characters.
660 kes The code no longer compiles with Microsoft VC++.
662 kes Start implementing Christopher's St.Bernard code.
663 kes Add Christopher's mods for opening files.
664 kes Strip \r \n from Win32 error messages (Christopher)
665 kes Add more info about Win32 system if unknown (Christopher)
666 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
667 kes Fix a number of incorrect strings marked for translation, when
668 they should not be (e.g. commands).
669 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
670 Patches supplied by user in bugs #608 and #599.
671 kes Use most recent of st_ctime and st_mtime in restore tree DIR
672 listing. This fixes some problems with Win32 printing incorrect
674 kes Correct the clock shift comm time calculation between the DIR
675 and the FD. It was added rather than subtracted.
676 kes Strip all backslashes in filenames to be restored on Win32
677 machines -kes the names should all be in Unix format, and if
678 there are any backslashes it is most likely due to an improper
679 FileSet definition, and the files will not otherwise be
681 kes Remove lib/regex.c (replaced by bregex.c).
682 kes Delete src/win32/License.txt
683 kes Modify installer to install LICENSE
685 kes Fix bug in build-win32-cross-tools script reported by Howard
686 kes Implement cross compiled bconsole
688 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
689 kes Write first cut of README.mingw32
690 kes Add back ua_label barcode fix from Rufolf Cejka.
691 kes Integrate the majority of the Mingw cross-tools submission
692 made by Howard Thomson. Everything compiles, with zlib, openssl,
693 and VSS turned off. Linking needs a pthreads library ...
695 kes Add 'Dir Status' button to the gnome console.
696 kes More work on migration.
697 kes Restore non-compatible base64 coding to permit compatibility.
698 kes Display heap stats in Storage daemon without debug level.
700 kes Integrate most of the MinGW changes -kes more to do.
702 kes Implement using pg_config for finding PostgreSQL files.
703 Fixes bug #600. Patch supplied by user.
704 kes Remove -t option from mktemp in mtx_changer.in and use
705 working directory. Fixes bug #578.
706 kes Update job start time after the any run before job so that
707 files created by the script are only backed up once. Fixes
709 kes Strip trailing newline only from filenames entered in
710 the restore command when reading a file. This permits
711 the user to enter filenames with trailing spaces. Fixes
712 bug #549. The user supplied a patch that I modified slightly.
713 kes Use the most recent time (st_mtime, st_ctime) in the dir
714 command in restore. This gives the user a better idea of what
715 the newest file really is. This fixes bug #574. The fix
716 was suggested by the user.
717 kes Implement a compatible version of base64. This permits external
718 programs to duplicate Bacula's base64 algorithm using standard
719 routines. This fixes bugs #296, and 565. Patch submitted by
721 ================= Note ========================
722 Previous Signatures stored in the database are no longer
723 compatible with this. The main downside is for Verify jobs,
724 and doing an InitCatalog run will fix the problem. Also, the
725 authentication between the deamons is changed, so all daemons
726 must be simultaneously upgraded.
727 ==============================================
728 If you don't like this fix, set:
729 const bool compatible = true;
731 const bool compatible = false;
734 kes Ensure that DB signature is never NULL.
735 kes Ensure that DB table names are not translated.
736 kes Fix scheduler to handle time skew (eg daylight savings).
737 kes Fix scheduler to use lock_jobs() to avoid most problems
738 with reload. Window is now milliseconds.
740 kes Apply patch from Christopher Hull
741 kes Allow multiple connections to database with different
743 kes Invalidate the scheduler when doing a reload. Fixes seg
744 fault, but still 60 second window.
745 kes Additional info in Reschedule message.
746 kes Use set_jcr_job_status() everywhere to prevent loss of
748 kes Display peer IP in FD if error from connecting DIR.
749 kes Don't increment file count for DIRBEGIN.
750 kes Replace illegal characters in Win32 filename by _.
751 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
752 kes Hash hard link filenames rather than linked list.
753 kes Fix for security failure in chdir on Win32.
754 kes Add CreateDirectoryA/W win32 API entry points.
755 kes Add /silent option to Win32 FD for Install/Remove service.
756 kes Always print Heap statistics in FD.
758 kes Remove the -f option from the chown in Makefile.in for more
760 kes Change setting the group in Makefile.in to use chgrp for
762 kes Implement a write_store and read_store to replace
763 dirstore in reserve.c
764 kes Implement a Bacula read/write lock for Python rather
765 than using the Python lock to avoid recursive problems.
766 kes Correct the uninstall directory names in filed/Makefile.in
767 as reported by a user.
769 kes Correct some problems with database creation (new tables).
770 kes Replace a bunch of old 0x%x by %p.
771 kes Get first cut of Migration with Job selection working.
773 kes Change store_bit() to store_bool() for the Spooling in
774 dird_conf.c -kes bug reported by Robert Nelson.
776 kes Correct Makefile bug found by Dan Langille.
778 kes Correct Makefile for Solaris /bin/sh
779 kes Correct mtx-changer.in for Solaris /bin/sh
780 kes Abort if a conf resource does not have a Name =
782 kes Change the name of the regex program to bregex.
783 kes Add the bwild program to the tools directory. It is similar
784 to the bregex program.
785 kes Implement create bregex.h and bregex.c in src/lib from the
786 Python regexp program.
787 kes Use the new bregex.c to implement Regex expressions on Win32.
789 kes More work on migration.
790 kes Implement wild program in tools directory for testing
791 wild-cards. Almost identical to the regex program.
792 kes Up port VSS single thread locking code.
793 kes Replace N_(..) by NT_(...) to inhibit translation of
795 kes Modify Makefile to change the permissions on Working Directory
796 to 770 if the directory is created.
797 kes Do not fail the Makefile if changing the permissions or
798 owner/group on WorkingDir fails.
799 kes Remove early selection of Scratch Volumes in the recycling
801 kes Correct the old recycling algorithm so that Scratch Volumes
802 are selected when looking for a Volume in the changer.
803 kes Correct a typo in the Verify SQL reported by Joe Park.
805 kes Remove automatic case folding on Windows FDs. You must
806 explictly use the 'Ignore Case = yes' option.
807 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
808 scratch volume in an Autochanger early in the 'recycling'
811 kes Make weof() and clrerror() methods of class DEVICE.
813 kes Tweak license to include Microsoft restrictions.
814 kes Move mysql.reconnect to after real_connect(). Thanks to
815 Frank Sweetser for the patch.
816 kes Disallow a backslash in a File = directive (Windows junk)
817 unless the string is quoted.
818 kes Apply Eric's patch to ua_label.c so that daemon protocol
820 kes Add NT_ definition for strings that should not be translated.
821 kes Apply NT_() to ua_label.c
822 kes Remove timed wait for VSS on Win2K3 as it is not yet
824 kes Correct bacula.in script to reference bacula-ctl-xx in the
825 sysconfig directory rather than the bin directory.
827 kes Fix a long standing bug in the bacula start/stop scripts.
828 kes Attempt to add the new bacula-ctl-* files to the rpm.
829 kes Switch to using typeof() for list traversing to avoid
830 as many FC5 g++ compiler warnings as possible.
832 kes Split the bacula start/start script into four files:
833 bacula -kes starts and stops calling other scripts
834 bacula-ctl-dir -kes starts/stops the director
835 bacula-ctl-fd -kes starts/stops the File daemon
836 bacula-ctl-sd -kes starts/stops the Storage daemon
838 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
839 kes Correct editing of JobId from int to int64 in fd_cmds.c
840 kes Eliminate FileSet name race with bash_spaces() and multiple
841 threads by bashing in a local.
842 kes Fix error return from 'use storage' to print a correct error
843 message rather than nothing.
844 kes Correct false re-read last block error message when two jobs
845 are simultaneously writing at the end of a tape.
846 kes Simplify exit conditions in the reserve.c code to avoid
847 possible non-release of reservation_lock().
848 kes Suffle lock order in reserve to avoid deadlock between
849 reservation lock and device mutex.
851 kes Initialize jcr mutex before first use. Thanks to Thorsten for
852 tracking this down for me !!!! as it broke the Win32 build.
854 kes Integrate addition of line count limitation to bsmtp -l from
855 Sebastian Stark <stark at tuebingen.mpg.de>
857 kes Implement regex test program in tools directory.
858 kes Attempt to fix time problem with bsmtp with foreign langs.
859 kes Add strip_trailing_newline() submitted by user.
860 kes Implement regex matching in migrate.c
862 kes Fix bug #537 to allow arbitrary time to mount a volume for
863 restore, if polling is turned on.
864 kes If dir_user or dir-group is specified in ./configure apply it to
865 the working-dir. Fixes bug #533.
866 kes If rescheduling a job cancel the previous incarnation with the SD.
867 Fixes bugs #566 and 557.
868 kes Fix bug #567 do_message() definition type conflict.
871 kes Add more jcr methods and make mutex and use_count private.
872 kes Create lock/unlock methods for jcr.
873 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
874 records to get to seek position.
875 kes Integrate patch from bug #561 to correct conio.c signal definitions.
876 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
877 terminates correctly by doing pthread_kill(). Do not destroy
878 SD cond wait variable between executions of the job. Use local
879 mutex for cond variable to avoid blocking jcr chain. Fix poor
880 use of jcr use count in jobq.c for restarted jobs.
881 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
882 lib/jcr.c -kes prevents locking the jcr chaing.
883 kes Apply patch from bug #564, which corrects listing volumes with
884 multiple autochangers. Apply same fix to next volume list.
885 kes Fix bug #562 where restore bootstrap file is not unique.
886 kes More details in implementing David's migration syntax proposal.
887 kes Save and restore dcr when swapping drives so that if we have
888 a write dcr it is not lost.
889 kes Use new routine lock_reservations() to lock the reservations
890 system, and call it while looking for a volume in askdir.c.
891 This could possibly fix bug #543.
892 kes Stop SD command loop if job is canceled.
895 kes Remove old code from findlib/create_file.c
896 kes Rename mac.c migrate.c
897 kes Add user friendly display of VolBytes in job report.
898 kes Rename target... to previous... to make it a bit easier to
900 kes Add selection type and selection pattern to Migration (idea
901 given by David Boyes).
904 kes The po files should now be current.
905 kes Fix new sql_use_result() code to properly release the
906 buffers in all cases.
907 kes Use the keyword ujobid to mean the unique job id; job or jobname
908 to mean the Job name given on the Name directive, and jobid to
909 be the numeric (non-unique) job id.
910 kes Allow listing by any of the above.
911 kes Add the user friendly job report code for reporting job elapsed time
912 and rates with suffexes from John Kodis <kodis at comcast.net>.
913 kes Add Priority and JobLevel as Python settable items.
914 kes Use TEMPORARY table creation where the table is created by
916 kes Add new code submitted by Eric for waiting on specific jobid.
917 kes Add ACL checking for the dot commands.
918 kes Fix restore of writable FIFOs.
919 kes Fix a bug in bpipe where the string was freed too early.
921 kes Modify the Python class examples to inherit object -kes new way
922 of defining classes. Patch from Felix Schwarz.
923 kes Implement jobuid to replace old usage of job in keywords as
924 suggested by Eric Bollengier.
925 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
926 wait (wait for all jobs to stop)
928 wait jobuid=unique id
930 kes Implement write variables for Python to set Priority (anytime), and
931 Job Level, only during JobInit event.
933 kes Fix the block listing bug pointed out by Arno.
934 kes Update the po files at Eric's request.
936 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
937 accept time qualifiers.
938 kes Make catalog respect ACL.
939 kes Add recycle count to Media record.
941 Changes to 1.39.6-beta1 24Feb04
943 kes Add Rudolf Cejka's new rc-chio-changer.
944 kes Implement pulling Volume from Scratch Pool if the
945 Volume is in the autochanger.
946 kes Implement additional command arguments for update Volume.
950 kes Back port changes to 1.38.5
951 kes Fix recycle SQL for StorageId.
952 kes Fix misplaced quote in mtx-changer script.
954 kes Note. Your database must be updated, or you must create
955 a new database. I have not yet incremented the database level.
956 kes Add Location table.
957 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
959 kes Implement create/get mac record in database for adding extended
960 Migration data to the job record.
961 kes Add new MAC table to update/make database scripts.
962 kes Return Storage name used when getting VolumeNames for a job.
963 kes Change bsr file keyword Storage to Device, which is more accurate.
964 kes Ensure that Mac records are pruned/purged.
965 kes Tweak SD tools to deal with changing media type.
966 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
967 kes Pass pointer to dcr pointer to acquire_device_for_read() so
968 that the subroutine can switch devices, and hence dcrs.
969 kes Modify the multiple MediaType read code to re-use the same
970 dcr when switching devices. This makes the code much more
972 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
973 from a table for restore.
974 kes Add Storage name to VolParams, but it really should be Device.
976 kes Add disk-changer to scripts directory + configure/Makefile
977 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
978 kes Implement store_bit scanner to replace store_yesno. Mostly done.
979 kes Implement new store_bool that stores in a bool.
980 kes Add true/false to yes/no conf directives.
981 kes Make first cut at changing appropriate store_yesno to store_bool.
982 kes Complete implementation of Pool storage devices.
983 kes Move starting clones to job.c
984 kes Move create_restore_bootstrap_file() to job.c
985 kes Make copy_storage() more general to be able to handle
987 kes Cleanup a lot of migration code for manual running, including
989 kes Move getting a scratch Volume into a subroutine.
990 kes Make all places a Volume that is added to a pool to
992 kes Fix bug in autochanger recycle code (improper edit 64 bit).
993 kes Fix segfault in restore command when no value specified.
994 kes Start adding code to handle multiple MediaTypes in restore.
995 kes Eliminate race condition in getting Volume name for
996 two drive autochanger.
997 kes More debug code in autochanger.
998 kes Add storage keyword to bootstrap file, add parsing.
999 kes Move slot in bsr file into Volume record as there will be
1000 a different slot for each Volume.
1001 kes Create reserve.h
1003 kes Implement Pool storage overrides.
1005 kes Implement first cut of Migration.
1006 kes Implement mysql_use_result() from patch by Karl Hakimian.
1007 This reduces significantly the memory consumption during
1008 the restore tree building, and hence runs faster too.
1009 kes Implement StorageId patch supplied by user (reggie) in bug
1010 #536. This should permit Bacula to work correctly with two
1012 kes Implement Job listing variations suggested by a user.
1013 kes Move updating bootstrap code in backup.c to subroutine
1014 update_bootstrap_file().
1015 kes Add new job status elapsed time and bytes written user
1016 friendly job report output patch sent by John Kodis
1017 <kodis at comcast.ne>.
1018 kes Implement a storage list in Pools.
1019 kes Separate out setup_job() code from run_job().
1020 kes Get migration working -kes lots of changes in mac.c in both
1022 kes Apply patch from user (Eric Bollengier I think) that fixes a
1023 DIR crash when no arguments are supplied to a dot command.
1024 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1025 kes Fix command arg name->volume in label command of gnome-console.
1026 kes Fix SD acquire.c to release correct DCR by explicitly testing
1027 on the dcr address rather than trying to devine if it is a read
1028 or write dcr. This failed in error conditions when the device was
1032 kes Apply user supplied patch for more readable rate output
1034 kes Continue implementing migration.
1035 kes Implement support for removable filesystems in SD.
1036 kes Ensure that btraceback scripts can be read by anyone.
1037 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1038 kes Correct bug where canceling restore before the FD contacts
1039 the SD causes the drive to be left in read mode.
1040 kes Move ofline_or_rewind into DEVICE::close().
1041 kes Eliminate close_device.
1042 kes Convert several dev subroutines to methods (e.g. bsf,
1044 kes Eliminate force_close_device().
1045 kes Implement Device Type directive in Device resource that
1046 can have values File, Tape, Fifo, DVD, or Prog.
1047 kes Add has_cap() method to Device.
1050 kes Add patch from bug #527 to allow RedHat user to specify
1051 options/user/group for starting each daemon in
1052 /etc/sysconf/bacula.
1054 kes Add two new queries to query.sql provided by Arno. One
1055 list volumes known to the Storage device, and the other
1056 lists volumes possibly needing replacement (error, ...).
1058 kes Add periodic (every 24 hours) garbage collection of memory
1059 pool by releasing free buffers.
1061 kes Correct bug counting sized (for display only) in smartall.c
1062 kes Print FD mempool stats if debug > 0 rather than 5.
1064 kes Make db_lock() mutex error fail the job rather than abort
1065 Bacula. Canceling the job caused the mutex to fail.
1066 kes Correct bug in alist.c that re-allocated the list if the
1067 number of items goes to zero.
1068 kes Move the reservation system thread locking to the top level
1069 so that one job at a time tries all possible drives before
1071 kes Implement a reservation 'fail' message queue that is built
1072 and destroyed on each pass through the reservation system.
1073 These messages are displayed in a 'Jobs waiting to reserve
1074 a drive' list during a 'status storage='. Note, multiple
1075 messages will generally print for each JobId because they
1076 represent the different problems with either the same drive
1077 or different drives. If this output proves too confusing
1078 of voluminous, I will display it only when debug level 1
1079 or greater is enabled in the SD.
1081 kes Add enable/disable job=<job-name>. This command prevents
1082 the specified job from being scheduled. Even when disabled,
1083 the job can be manually started from the console.
1084 kes During 'update slots' clear all InChanger flags where the
1085 StorageId is zero (old Media records).
1087 Beta release 1.38.4:
1089 kes Fix autochanger code to strip leading spaces from returned
1090 slots number. Remove bc from chio-changer.
1091 kes Back port a bit of 1.39 crypto code to reduce diffs.
1092 kes Fix first call to autochanger that missed close()ing the
1093 drive. Put close() just before each run_program(). Fixes
1096 kes Add PoolId to Job record when updating it at job start time.
1098 kes Pull in more code from 1.39 so that there are fewer file
1099 differences (the new ua_dotcmds.c, base64.h, crypto.h
1100 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1101 util.c. Aside from ua_dotcmds.c these are mostly crypto
1103 kes Implement new method of walking the jcr chain. The
1104 incr/dec of the use_count is done within the walking
1105 routines. This should prevent a jcr from being freed
1106 from under the walk routines.
1111 kes Start implementing Verify list output.
1112 kes Move the suitable_drive flag to a better place to prevent
1113 premature termination of the reservation if all drives
1114 are busy -kes should fix Arno's diff/inc pool failures.
1116 kes Add mutex to single thread VSS code in Win32.
1118 kes Simplify code in askdir.c that waits for creating an appendable
1119 volume so that it can handle multiple returns from the wait
1121 kes Modify the wait code to permit multiple returns.
1122 kes Return a zero when "autochanger drives" is called and
1123 it is not an autochanger.
1124 kes Make rewind_dev() a method taking a DCR as an argument.
1125 This permits closing and reopening the drive if the
1126 rewind fails as happens if the drive was loaded while the
1127 file descriptor was open. This refreshes the file descriptor.
1128 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1129 if the device is open or not. This should eliminate
1131 kes Return error if reserve cannot find at least one suitable device.
1132 kes Make wait_for_sysop() return correct state information.
1133 kes Fix Win32 state file problem. write was not using compat
1134 code. This should fix bug #500.
1136 kes Modify gui on command to set only GUI mode and not batch.
1137 kes Modify .messages command to always print messages regardless
1139 kes If GUI mode is on, suppress automatic printing of
1141 kes Delete old bnet packet code.
1142 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1143 wx-console. -kes not implemented because bconsole must be updated.
1144 kes Modify restore command in wx-console to set gui on and to use
1145 only .messages instead of messages. Hopefully this fixes bug
1147 kes Fix seg fault in exit of acquire when canceling a job --
1148 reported by Wolfgang Denk
1149 kes Pull in latest reservation system changes from 1.38
1150 kes Make .messages command always print messages regardless
1151 of the automessages flag.
1153 kes Fix seg fault if user labels a drive directory bug #513
1154 kes Remove quotes around Version as it breaks things.
1156 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1157 kes Apply sparse code fix for raw drives and fifos. Bug 506
1158 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1160 kes Correct reservation system to do a last ditch try
1161 for any mounted volume, then anyone anywhere.
1162 kes Add quotes around table Version because of
1163 error in MySQL 4.1.15 -kes bug report submitted.
1164 kes Correct some minor problems with btape in the fill
1166 kes Updates to ssh-tunnel from Joshua Kugler.
1167 kes Added a report.pl program from Jonas Bjorklund.
1168 kes Simplify the O_NONBLOCK open() code for tape drives,
1169 and always open nonblocking.
1170 kes Do not wait for open() if EIO returned (shouldn't happen).
1171 kes Eliminate 3 argument to tape open().
1172 kes Correct the slot # edited in the 3995 Bad autochanger unload
1174 kes With -S on bscan (show progress) do not divide by zero.
1176 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1177 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1178 kes Remove unused code in wait_for_device.
1179 kes Make wait_for_device() always return after 60 seconds of wait.
1183 kes Add stubs for non-crypto build.
1185 kes Use localhost if no network configured
1187 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1188 kes Remove debug print.
1189 kes Add bail_out in error during state file reading.
1191 kes Merge changes made to 1.38.3 into HEAD
1192 kes Add stubs for pygtk-console code
1193 kes Create Makefile.in for pygtk-console code
1195 kes Merge updates into 1.38 branch
1196 kes Update specs to include mysql4 define.
1197 kes Fix when attributes are sent, must be after binit().
1198 kes Stop read_record() if status not ok in second loop.
1199 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1200 and partial records in read_record(). This allows bscan
1201 to get FileIndex at EOT correct.
1202 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1204 kes Fix Win32 built to work with new crypto code.
1205 kes Apply patch supplied by user (slightly modified) to fix
1206 correct detection of holes in block devices and FIFOs.
1208 kes Apply patch supplied by user (slightly modified)
1209 to fix SD hang with multiple pools and bad client
1210 IP. Fixes bug # 508.
1212 kes Add nagios plugin to the examples directory. Submitted by
1214 kes Remove warning message about multiple saves of hardlinked files
1215 from find_one.c as it can generate too many warning messages.
1216 kes Modify most restore error messages to be queued so that they
1217 appear at the end of the job rather than mixted with the restore
1218 listing where they could be "lost".
1220 kes Reset timeout values before select() per patch from
1221 Frank Sweetser for problems with non-blocking sockets.
1222 kes Unlink the state file if either reading or writing it gets
1223 errors. Hopefully this will fix Win32 exit problems.
1224 kes Add sanity check in append.c to ensure that dcr is not NULL.
1225 This can happen if multiple drive autochanger SCSI control
1226 channel and drive indicies do not correspond.
1228 kes Get next volume from Scratch pool before creating a volume.
1229 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1230 kes Remove argument from create_bacula_database for SQLite as it
1232 kes Add back index code so that two drive autochangers can get
1234 kes Change a bunch of debug levels to aid debugging autochangers.
1235 kes Fix reservation so that mutexes are properly applied.
1236 kes Rework reservation algorithm so that two drives can be used
1239 kes Landon merged his data encription changes into the HEAD
1240 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1241 If this patch is applied, the number of days can be specified with
1242 "list nextvol days=xx"
1244 "status dir days=xx"
1245 My use case is to be able to preview the next scheduled job (and the
1246 next tape to be used) on fridays if there are no scheduled jobs during
1250 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1251 kes Fix malformatted bnet error message that caused seg fault
1253 kes Applied user patch to improve README.vc8 in src/win32.
1255 kes Add Migrate, Copy, Archive Job types (some where there)
1256 kes Correct some more editing of JobId's (for 64 bit compatibility).
1257 kes Ensure that StorageId is stored in Media record when ever possible.
1258 kes Add Migration Job to Job.
1259 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1260 Next Pool to Pool resource.
1261 kes Add more code to mac.c (migration archive copy).
1262 kes Change Start Storage daemon job to require read and write storage
1264 kes Pass read storage data to SD as well as write storage data.
1265 kes Remove old code from winservice.cpp
1266 kes Break on error in scan.
1267 kes Fix typo in signal.c
1268 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1269 kes Cleanup how find_device() works.
1270 kes Add read output to Status in SD.
1273 kes Add red-black btree routines
1275 kes Remove abs() in bfile.c so that it compiles on Solaris.
1278 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1279 kes Fix bnet-server bug found on OpenBSD. Bug #486
1280 kes Fix cancel failure bug. Bug #481
1281 kes Fix failure when Pool name has spaces. Bug #487
1282 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1283 kes Fix a couple of free()s in src/filed/acl.c
1284 kes Fix memory overrun in bfile.c in building OS X resource
1285 fork filename. Bug #489
1286 kes Add Pool name to SD status output.
1288 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1289 kes Make sure to set storage before trying to set drive.
1290 kes Add bacula_mail_summary.sh to examples directory. It makes
1291 a single email summary of any number of jobs. Submitted
1293 kes Make sure when we do a mount to unblock the device even
1294 if the drive could not be opened.
1296 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1297 and correct a few minor problems to make it build on Linux.
1299 kes Remove delete of CVS from all Makefiles
1300 kes Fix seg fault when clicking on Add button in wx-console
1301 restore panel. Bug #470.
1302 kes Fix copyright date and URL typo -kes bug #468.
1303 kes Change autostart install for FreeBSD to look for rc.conf
1304 rather than rc.local as suggested fix for bug #466.
1305 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1306 grant on status. Bug #465
1307 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1308 update script. Bug #464
1309 kes Tweak #ifdefing a bit in new Win32 stream code.
1310 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1311 kes Add documentation of performance #defines