1 Technical notes on version 1.39
5 ebl Add yes keyword to prune/purge command
7 kes Correct a test in block.c that prevented restore of a DVD from
8 looking at the last part in the spool directory.
9 kes Make some error messages clearer mostly by using the word DVD
10 in the message. Improve infor message in read_record for DVDs.
11 kes Remove DVD kludges in dircmd.c label/relabel.
12 kes Move the dvd relabel code from dircmd.c into
13 write_new_volume_label_to_dvd() adding a relabel argument.
14 kes Rewrite the truncate_dvd() code to be much simpler and
15 more logical. First blow away any spool part, then create a
16 new empty part and write to the DVD.
17 kes Rewrite the can_write_on_non_blank_dvd() code making it
18 only ensure that no valid data is on the DVD -- i.e. it
21 kes Minor Makefile fixes.
22 kes Put attach_dcr_to_dev in a subroutine.
23 kes Make attaching/detaching to/from a device use a flag and
24 only detach if actually attached.
25 kes Add dvd-simulator.in to scripts directory and add to configure.
26 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
27 This could be a cause of a number of drive reservation problems.
28 Note, this code is now in attach_dcr_to_dev().
29 kes Suppress doing Volume updates if it is a system job. This should
30 prevent the DVD label blocking.
31 kes Clear the freespace ok flag in a couple of strategic places.
33 kes Put removing zero sized spool part file in subroutine and
34 call from release_device().
35 kes Add Richard's patch for relabel to dircmd.c, but save and restore
37 kes Rework a lot of subroutines in dev.c to take dcr as an
38 argument. This is done to eliminate the usage of attached_dcrs
40 kes Change truncated_dvd to blank_dvd, which seems more suitable.
41 kes Apply most of Richard Mortimer's truncate patch.
42 kes Create lseek() method for DEVICE that takes dcr as an
43 argument. This is to eliminate the use of attached_dcrs in
44 lseek(). The calls to lseek_dev() must still be changed.
46 kes Apply Richard Mortimer's patches for printing an error
47 message in btape when a DVD is used, and to initialize traceback.
48 kes Added error message to btape when trying to access a file.
49 kes Move prototype of update_slots() to protos.h.
51 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
52 and FDJobStatus to the Director Python variables.
53 kes Make sure valid argument passed to str_to_utime() where Arno
55 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
56 I.e. part of two different patches.
58 kes Modify disk changer to simulate some of the error conditions
60 kes Make sure the close() call in the SD tools is just before the
62 kes Implement dir_get_volume_info() in bls using the patch from
63 Richard Mortimer but call find_num_dvd_parts().
64 kes Implement find_num_dvd_parts() that mounts and scans a DVD
66 kes Move the omode code in open_dvd() up so that the cannot
67 write on blank disk can check can be bypassed for read mode.
70 kes Disable normal data spooling for DVD writing which uses
71 a different spooling mechanism.
72 kes Apply patch from Richard Mortimer to ensure that the number
73 of DVD parts is correctly updated.
75 Version 1.39.22 beta released:
77 kes Fix logic error in handling error return from mtx-changer
79 kes Make status from SD aware of -1 (unknown) Slot status.
80 kes At Eric's suggestion make both the "slots" and "drive" commands
81 to the Storage daemon work even if the drive is busy.
82 kes Make two separate Win32 menu links for starting bconsole and
83 wx-console in winbacula.nsi
84 kes Apply DVD part_spooled patch from Richard Mortimer
86 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
87 rbn Fixed problems migrating settings from previous releases in
88 Win32 installer. Add Readme.txt with an option to show it on
89 the installer Finish page.
91 kes Use get_catalog_resource() to open catalog database
92 to ensure that ACLs are respected and that user is
93 correctly prompted for database.
94 kes Integrate multiple console/director patch from
95 Carsten Paeth calle@calle.in-berlin.de
96 ebl Add character substitution in Job/JobDefs WriteBootStrap.
97 You can use now 'WriteBootStrap = "/path/%c_%n.bsr"'
98 kes Apply patch supplied in bug #656 to pass priority field
99 in the run dialog to the Director in gnome console
100 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
101 this will fix bug #627 where Bacula eventually gets
102 confused about what Volume it wants.
103 kes Add a new close_part() class in the SD to save the device
104 state around open/close_part/open for DVD writing. This
105 should fix the num_dvd_parts getting zeroed as reported by
107 kes Apply patch from Richard Mortimer that correct edit code
108 for debug output of st_size.
109 ebl Add support of encrypted data stream to bscan.
110 display data_len instead of data content (may be binary)
112 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
113 bcopy. Fixes bug #669 reported by Eric.
114 kes Fix incorrect number of arguments in SQL statement in
115 sql_get.c as reported by Eric.
117 kes Update examples directory.
118 kes Remove unused variable in winservice.cpp
119 kes Make Win32 make command build installer.
121 kes Correct dvd code that breaks tape labeling.
122 kes Implement Enabled on update slots.
124 kes When doing a label, pass the VolBytes back to the Director,
125 which puts it in the catalog.
126 kes Print an error message if the user attempts to prune an
128 kes Need to start using %ld when sscanfing 32 bit values.
130 kes Correct the counting of VolCatBytes for DVDs.
131 kes Add code to mount.c to require that VolCatBytes corresponds to
132 what is actually found when doing an append.
133 kes Update freespace only after writing on the DVD.
134 kes Remove code that blows away the current part in the spool file.
136 kes Apply new dvd-handler patch from Richard Mortimer.
137 kes Tweak so that debug level 20 shows only DVD commands.
138 kes Correct spooled_part flag in dev.c close() so that it is cleared
139 when the spool file is deleted or does not exist.
140 kes Print part number in read_records when eof hit (restore).
142 -es Make find with no args in tree restore return error rather than
143 stopping the selection. Fixes bug #665
144 kes Rework DVD writing to ensure that the last part is written
145 on open_next_part when dealing with a spool file.
146 kes Correct the lseek_dev() routine to handle end point correctly
147 (bug introduced by me).
148 kes Allow part number to exceed num_dvd_parts in lseek_dev().
150 kes Apply dvd-handler patch from Richard Mortimer.
151 kes Apply dvd error check patch from Richard Mortimer.
152 kes Apply bpipe race patch from Richard Mortimer.
153 kes Rework how DVD labels are handled and set append only
154 when part > num_dvd_parts.
156 kes Rework many features of DVD writing and reading. Added many error
157 messages. Most importantly changed part to represent the current
158 part number base zero. This makes current DVD writing incompatible
159 with previous version.
161 kes Add host:port to connect failure messages to FD and SD from Dir.
162 kes Add WhereACL to console ACL list. If nothing is specified, only
163 the default is permitted for restore. Otherwise, *all* allows any
164 path, or you can specify permitted paths. This should allow control
165 over where users can restore files. This is untested.
166 kes Modified message to add a ? (as in loaded?) when querying the autochanger
167 for what Slot is loaded.
168 kes Fixed the use of Slot, so that is more correctly maintained, thus
169 eliminating unneeded duplicate calls to determine what Slot is loaded.
171 kes Install man pages with 'make install'
172 kes wx-console crashes because of differences between Bacula and wxWidgets
173 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
175 kes correct improper indenting in wx-console/console_conf.c
176 kes update wx-console header copyrights
177 kes Fix bug #658 where wx-console mangles file/directory names containing
180 kes Add Media.Enabled flag to client backups for dotcmds.c
181 kes Enforce Media.Enabled=1 for a current restore to work.
182 kes Require restore case 3 to have sqlquery permission to work.
183 kes Remove obsolete del_MAC sql command.
184 kes Ensure that bscan creates Volumes with Enabled=1.
186 Version 1.39.20 beta released:
188 kes Correct missing Client table reference in SQL pointed out by
191 kes Fix Win32 build (new entrypoint, start baculafd).
193 kes Add -n option to bconsole to turn off conio.
194 kes Print JobIds to be migrated in Job Report.
195 kes Add additional user supplied notes to the messages part of
196 bacula-dir.conf concerning multiple email addresses.
197 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
198 kes Add more recent Feature requests to Projects file.
200 kes Apply Maritn's fix to src/win32/Makefile.
201 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
202 kes Implement pruning for Migration and migrated jobs.
203 kes Implement PoolOccupancy migration.
204 kes Implement PoolTime migration.
206 kes If doing a mount, look for a slot, and if specified pass it to
207 the SD so that it can load the autochanger.
208 kes Return DVD=1 flag if a label command is done to a DVD. This
209 permits setting VolParts to 1.
210 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
211 rework ua_label code based on DVD media type to use DVD flag returned.
213 kes Eliminate some compile warnings in dird_conf.c
214 kes Format the bytes field in the terminated jobs part of the status
215 command for the three daemons with suffixes to reduce print size
216 of backup bytes. Suggested by a user.
217 kes When not descending into a directory, print the File= name that
218 triggered it -- makes why not descending a bit clearer.
219 kes Do not unload autochanger when doing a list command -- basic code
220 from Eric Bollengier.
222 kes Fix bug #462 incorrect error message printed when client script called
223 from File= was not found.
224 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
225 do a rewind on Solaris when no tape is in the drive (Solaris does not
226 have the detailed errno found on Linux). Added Solaris specific code.
227 Note, this may apply to other OSes as well.
229 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
230 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
231 fix bug 648 - update sqlite script patches, lock out gnome2console
232 builds for platforms with gtk+ < 2.4.
233 Updated build_rpm.sh - add remote source directory, add switch for
234 signing, refine file names.
235 Updated spec file again for Mandriva build as they have this curious
236 custom of silently converting all manpages to bzip2 format just before
237 the final packaging step.
239 rbn Fixed the Windows Makefiles so that they won't accidentally try and
240 pickup binaries for the Unix build. This allows both the Unix
241 build and the Windows build to be built in the same tree without
242 interfering with each other.
243 rbn Fixed error handling and cleaned up mtx-changer.cmd.
244 rbn Added the rest of the database scripts. These are installed but are
245 not yet edited for variable replacement.
246 rbn Broke out the cats functionality from bacula.dll and put into new
247 separate dlls for each database type. At installation time the
248 correct one is copied to bacula_cats.dll.
249 rbn Eliminate the need to install the mysql.dll on client only builds.
250 rbn Moved dird/sql_cmds.c into the cats directory so all the database
251 specific #ifdefs were in the cats directory.
252 rbn Added a new sql_cmds.h with all the declarations for the variables
253 exported from sql_cmds.c.
254 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
255 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
257 kes Correct improperly formatted list command output reported by Dan.
259 kes Correct despool time calculation.
261 kes Remove previous changes to compat.cpp as they create problems.
262 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
263 kes Attempt to fix problems with the msg_queue crashing on Solaris
264 when Bacula is terminating, but problems remain.
265 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
266 name editing problems with too many \\?\es.
267 kes Fix some Bacula source code style problems in compat.cpp.
268 kes Add debug code to compat.cpp and convert non-Bacula debug code
271 kes Change the name of the technical notes file from kes-1.39 to
272 technotes-1.39. Prefix my messages with 'kes '.
273 kes Allow dequeue_messages() to be called twice. Should fix bug
275 kes Add Job type to bscan Job information output.
277 kes Update copyright date in program files, and for the most part
279 kes Implement %q in bsnprintf.c apparently I forgot it.
281 kes Make disk-changer sed command compatible with FreeBSD.
282 kes Make a first cut at a ReleaseNotes and ChangeLog for a
284 kes Make make clean descend into the src/win32 directory.
285 kes Fix some #ifdefing so that Solaris and FreeBSD compile
286 sys/stat.h was turned off.
287 kes Use suffix editing for new transfer rate messages.
288 kes Attempt to come up with a workaround which seems to be an OS
289 bug where write() returns EBUSY. IMO this should not happen.
290 It triggered in truncatebug test. The workaround retries using
292 kes Eliminate a strerror() call in a class method that failed with
294 kes Use rm -rf rather than rmdir to delete the src/win32/release
295 directory during make clean.
297 kes Make bscan ignore ACL streams.
298 kes Update projects files with new Feature Requests.
299 kes Generate current English and French manuals and upload
301 kes Update the home page to include the new British/French flags to
302 switch between translations. Work done by Alexandre Baron.
303 kes Make disk-changer script print an error message if the changer
304 directory is not defined.
305 kes Create a generic DB routine for getting an int (32/64 bit) from
307 kes Add more migration code.
308 kes Add a few more files to .cvsignore here and there.
309 kes Minor fixes for SD write rate and despooling rate.
310 kes Turn off new test code in src/console.c
314 kes Incremented the version number to signify that all of Robert's code
315 for Win32 that was in the branch is now integrated into the HEAD,
316 and that Eric has submitted code that we hope will provide limited
317 backward compatibility with 1.38 file daemons (more testing to be
319 kes I rationalized a few of the names of the variables (mainly jcr names)
320 that are used during migration as keeping three different jcrs at the
321 same time clear in ones head is not easy.
325 eb Tweak new runscript feature to work with 1.38.x FDs.
326 eb Correct crypto.c to fix segfault when restoring an encrypted stream
327 on fd which don't use rsa keys.
328 eb Add yes/no English keywords on localized yes/no questions.
330 kes Several important commits from Robert Nelson for code cleanup and
332 kes Modify console.c so that when conio is enabled, it converts \n to
333 \n\r before outputting to the console. Hopefully this will fix
334 the problems with expect in Perl that Eric saw.
336 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
338 kes Add Comment field to llist of a volume.
339 kes Allow true/false in some yes/no questions.
340 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
341 kes Remove a few /n's when scanning commands from another daemon. This
342 permits adding additional fields later.
343 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
344 kes Update README.mingw
346 kes Tweak authentication to work with 1.38.x FDs.
347 kes Tweak catalog make scripts.
348 kes Fix catalog upgrade scripts so that they work.
349 kes Correct despooling debug code to eliminate race condition.
351 kes Add additional fields as specified by Arno to LocationLog.
352 kes Add comment field to the Media record.
353 kes Add Time field to the Log record.
354 kes Correct migration SQL (thanks to Bill Moran) so that it
355 runs with PostgreSQL also.
356 kes Add spooling/despooling info in status output of SD.
358 kes Spend a lot of time integrating mkcdrec with the rescue disk.
359 kes Add VOLMGMT message class for volume management messages (none yet).
360 kes Add CATALOG as a destination. It goes into the LOG table.
361 kes Implement the Log table in the DB.
362 kes Implement the Location Log table in the DB (for user use).
363 kes At Eric's request add a run_scripts() just after blast_data in
366 kes Add Enabled column to Location, correct some typos in DB schemas.
367 kes Correct bug I introduced into RunScripts enum.
368 kes Add log table to Catalog
369 kes Purge original job migrated if the migration terminates normally.
370 kes Cleanup purging of files/jobs so that it is done only in a
372 kes Add new VOLMGMT message class.
373 kes Add Catalog message destination (user conf code remains to be written).
375 kes Modify read_record and friends to properly deal with migration
377 kes Update debug code in read_record.
379 ======================= Warning ==========================
380 Separate read and write storage in Jobs in the Director. This
381 is a major rewrite of some of the low level code and hence has
382 a high probability of introducing bugs.
383 ==========================================================
385 kes Move the job init code up to *before* the job is put into
386 the job queue (resource allocation queue). This permits the
387 job to establish whether it will read or write or do both.
388 kes Add name() methods to all the resource classes.
389 kes Implement separate read and write storage resource
390 allocation/deallocation in jobq.c
392 ======================= Warning ==========================
393 Implemented new method of getting the default Storage from the Media
394 record rather than from the MediaType for restore. As a fall
395 back, if no Storage is defined, use the MediaType. This
396 eliminates most all prompts if there are multiple MediaTypes
397 used. This is an important and fundamental change.
398 ==========================================================
400 kes Add more detail (Storage, Device) to list of volumes printed
402 kes More code in migrate. In particular start multiple jobs if
404 kes Probably overkill, but ensure that the bsr is unique even within a
406 kes Rework bsys.c drop() so that it now should work as expected.
407 kes Update a bunch of old copyrights -kes particularly in .h files.
408 kes Remove src/lib/bshm.c/h
412 ======================= Warning ==========================
413 All hash codes in the database are now kept in world
414 compatible base64 format (no = filling). This means that
415 all FileSets will be updated and if you are running
416 verify jobs, you must do an InitCatalog.
417 Authentication uses the new algorithm, but should be
418 backward compatible with 1.38.x
419 ===========================================================
421 kes Modify the authentication routines so that the 1.39.15 Director
422 always runs with the compatible binary to base64 code (same as
423 the rest of the world). It will however detect if an SD or
424 FD is running the old code and if that is the case, will use
425 the old algorithm for authentication. However, all consoles must
426 use the compatible algorithm, and all data entered into the database
427 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
428 use the compatible algorithm.
429 kes Rename the cram_md5 routine names to be slightly more appropriate
430 to what they are doing (challenge and respond).
431 kes Robert committed his #ifdef and header cleanup.
433 kes Fix a compiler warning in files/backup.c
434 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
436 kes Robert committed his low impact changes.
437 kes I removed a size_t from the jcr.h definition.
438 kes Update the tape regression scripts (still to be tested).
439 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
440 kes Require done or quit to exit from in memory tree restore.
442 kes Write install/uninstall of new manpages. There are now a
443 pile of man pages. Some of which need a lot of work.
445 ======================= Warning ==========================
446 The --mandir ./configure option now points to the top level
447 man directory. The man files will be installed under
448 mandir/man8 and mandir/man1 as appropriate.
449 ==========================================================
451 kes Add complete text of GPL to LICENSE.
452 kes Implement job report that indicates where Storage and Pool
453 came from -kes with overrides and Pool storage and NextPool,
454 it is all very complicated.
455 kes Create a few common subroutines for backup.c and migrate.c
456 kes Eliminate warning messages from tray-monitor.c
458 kes Apply fix for scheduler for missing unlock_jobs().
459 kes Clean out autoconf caches before rebuilding configure
460 kes Fix the FreeBSD pthreads lib define updated by Dan.
461 kes Add missing semicolon in src/console/console.c
462 kes Add Robert's enhanced version of build-win32-cross-tools
463 as well as his patch file.
464 kes Note, the new gcc options are likely to break building of
465 wx-console or the tray-monitor ...
467 kes Implement Robert's suggestion to suppress printing compile lines.
468 kes Detect GCC correctly (I hope)
469 kes If using GCC (actually g++) add the following compiler flags
470 -fno-strict-aliasing -fno-exceptions -fno-rtti
472 ===================== Warning =============================
473 Turn on new bsnprintf() code. This could cause print output
475 ===========================================================
477 kes Fix crypto when not using openssl. I previously overlooked this.
478 kes Eliminate crypto type punning problems by eliminating void * and
479 using uint8_t * instead.
480 kes Harden authentication failure in FD by single threading errors
481 and forcing a 6 second wait.
483 ===================== Warning =============================
484 Removed "Accept Any Volume" directive.
485 ===========================================================
487 kes Major cleanup and simplification of regress using shell functions
488 (more tests to be converted to new format)
489 kes Add detection of 64 bit Irix as indicated by user.
490 kes Increment catalog database id from 9 to 10.
491 kes Add a few of the new database fields to the various C++
493 kes Implement code to fill in the most important new fields (e.g.
495 kes Ensure that most of the new fields are in create/get/insert/update.
496 More work to be done.
498 kes Update some very old licenses in src/cats.
499 kes Modify the database format for handling Migration jobs:
500 Add PriorJobId, RealEndTime to Job table
502 Remove Stripe from JobMedia record (not used, wasting space)
503 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
504 Add Cost to Location table.
505 kes Delete mac_record subroutines.
506 kes Add new table values to create/update/get routines as appropriate.
507 kes Update the update_tables and make_tables scripts.
508 kes Make a first cut in using a union where multiple pointers (actually
509 pointers to pointers) are stored.
510 kes Make some changes to base64.c suggested by Robert and others and add
511 a small amount of documentation.
512 kes Add some changes suggested by Peter for Solaris (bregex...)
513 kes Make runscript.h always built because it needs to be pulled into
514 more places. In particular its RES was left out of a union.
515 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
516 This makes it slightly easier to detect uninitialized variables.
518 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
519 sometimes creates install problems.
520 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
521 Nelson's code. More to do.
522 kes Convert a few store_bit to store_bool in filed_conf.c.
523 kes DVD tweak to block.c as supplied by Uwe Muessel.
525 kes Modify configure.in to check for typeof().
526 kes In findlib/attribs.c use typeof instead of templates if possible.
528 kes Implement partial error messages for src/filed/acl.c
529 kes Fix return code to fail when doing update barcodes and
530 Pool resource is not found. This previously caused Volumes
531 to be labeled as cleaning tapes.
532 kes Small updates to projects.
534 kes Add Eric Bollengier patch for new RunScript directive. It breaks
535 compatibility between dird and fd.
537 kes Prevent DVD code from rewriting label if the device cannot be
539 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
540 fix Debian build bug.
541 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
542 kes Integrate manpages contributed by Jose Luis.
543 kes Update projects file.
544 kes Add manpages Makefile.in to configure.in
545 kes Remove installation of bacula.8 in scripts directory.
547 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
549 O_NOATIME is a open() flag which makes it possible to read a file without
550 updating the inode atime (and also without the inode ctime update which
551 happens if you try to set the atime back to its previous value). It also
552 prevents a race condition when two programs are reading the same file, but
553 only one does not want to change the atime. It's most useful for backup
554 programs and file integrity checkers (and bacula can fit on both
557 Recent versions of the Linux kernel and glibc have support for it (the
558 glibc support being mostly copying the O_NOATIME definition to
559 bits/fcntl.h). If there's no support for it on the kernel, trying to use
560 it does nothing (since the kernel ignores unknown flags).
562 If the kernel has support for it, trying to use it either works, fails
563 silently (mostly in remote filesystems), or returns errno=EPERM (if you
564 are not either the owner of the file or root). A simple way to prevent the
565 failure is to open the file without the flag and set it later with
566 fcntl(F_SETFL), ignoring any EPERM errors.
567 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
568 of restarted jobs to complete (due to a destroyed pthreads conditional
569 variable used by the message thread).
570 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
572 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
573 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
574 colons in query.sql file.
575 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
576 not to create orphans.
577 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
578 in restore long listing.
579 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
580 of incorrect MarkedId.
581 kes Apply patch from adioso bug #616 to correct text in manual (replace
582 Director with File daemon).
583 kes Rework a few of the zlib changes so that they build properly.
586 kes Move DIR "run" command to SD before starting the message thread
587 as suggested by Cristopher Hull to avoid a race deadlock from
588 two threads using the bsock structure.
589 kes Modify LICENSE to correct some problems pointed out by Debian.
591 kes Correct EOF with no \n lex.c problem.
592 kes Tweak compat.h compat.cpp and merge with apcupsd
593 kes Add additional INFO messages if autochanger cannot be used.
596 kes Simplify Win32 Makefile
597 kes Correct count of buffers/bytes used by smartall.c
598 kes Updated compat.h after porting apcupsd to MinGW.
600 kes Work on getting wx-console building on MinGW. wxWidgets now builds
601 started adding Makefile ...
602 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
604 kes Reloading a bad configuration file doesn't kill director any more.
605 Thanks to fix from Eric Bollengier.
607 kes Fix problem of accents with new Win32 code.
608 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
609 works in the MinGW build with the exception that there
610 is a problem with accented characters -kes i.e. there is
611 some mapping problem with wide characters.
612 kes The code no longer compiles with Microsoft VC++.
614 kes Start implementing Christopher's St.Bernard code.
615 kes Add Christopher's mods for opening files.
616 kes Strip \r \n from Win32 error messages (Christopher)
617 kes Add more info about Win32 system if unknown (Christopher)
618 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
619 kes Fix a number of incorrect strings marked for translation, when
620 they should not be (e.g. commands).
621 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
622 Patches supplied by user in bugs #608 and #599.
623 kes Use most recent of st_ctime and st_mtime in restore tree DIR
624 listing. This fixes some problems with Win32 printing incorrect
626 kes Correct the clock shift comm time calculation between the DIR
627 and the FD. It was added rather than subtracted.
628 kes Strip all backslashes in filenames to be restored on Win32
629 machines -kes the names should all be in Unix format, and if
630 there are any backslashes it is most likely due to an improper
631 FileSet definition, and the files will not otherwise be
633 kes Remove lib/regex.c (replaced by bregex.c).
634 kes Delete src/win32/License.txt
635 kes Modify installer to install LICENSE
637 kes Fix bug in build-win32-cross-tools script reported by Howard
638 kes Implement cross compiled bconsole
640 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
641 kes Write first cut of README.mingw32
642 kes Add back ua_label barcode fix from Rufolf Cejka.
643 kes Integrate the majority of the Mingw cross-tools submission
644 made by Howard Thomson. Everything compiles, with zlib, openssl,
645 and VSS turned off. Linking needs a pthreads library ...
647 kes Add 'Dir Status' button to the gnome console.
648 kes More work on migration.
649 kes Restore non-compatible base64 coding to permit compatibility.
650 kes Display heap stats in Storage daemon without debug level.
652 kes Integrate most of the MinGW changes -kes more to do.
654 kes Implement using pg_config for finding PostgreSQL files.
655 Fixes bug #600. Patch supplied by user.
656 kes Remove -t option from mktemp in mtx_changer.in and use
657 working directory. Fixes bug #578.
658 kes Update job start time after the any run before job so that
659 files created by the script are only backed up once. Fixes
661 kes Strip trailing newline only from filenames entered in
662 the restore command when reading a file. This permits
663 the user to enter filenames with trailing spaces. Fixes
664 bug #549. The user supplied a patch that I modified slightly.
665 kes Use the most recent time (st_mtime, st_ctime) in the dir
666 command in restore. This gives the user a better idea of what
667 the newest file really is. This fixes bug #574. The fix
668 was suggested by the user.
669 kes Implement a compatible version of base64. This permits external
670 programs to duplicate Bacula's base64 algorithm using standard
671 routines. This fixes bugs #296, and 565. Patch submitted by
673 ================= Note ========================
674 Previous Signatures stored in the database are no longer
675 compatible with this. The main downside is for Verify jobs,
676 and doing an InitCatalog run will fix the problem. Also, the
677 authentication between the deamons is changed, so all daemons
678 must be simultaneously upgraded.
679 ==============================================
680 If you don't like this fix, set:
681 const bool compatible = true;
683 const bool compatible = false;
686 kes Ensure that DB signature is never NULL.
687 kes Ensure that DB table names are not translated.
688 kes Fix scheduler to handle time skew (eg daylight savings).
689 kes Fix scheduler to use lock_jobs() to avoid most problems
690 with reload. Window is now milliseconds.
692 kes Apply patch from Christopher Hull
693 kes Allow multiple connections to database with different
695 kes Invalidate the scheduler when doing a reload. Fixes seg
696 fault, but still 60 second window.
697 kes Additional info in Reschedule message.
698 kes Use set_jcr_job_status() everywhere to prevent loss of
700 kes Display peer IP in FD if error from connecting DIR.
701 kes Don't increment file count for DIRBEGIN.
702 kes Replace illegal characters in Win32 filename by _.
703 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
704 kes Hash hard link filenames rather than linked list.
705 kes Fix for security failure in chdir on Win32.
706 kes Add CreateDirectoryA/W win32 API entry points.
707 kes Add /silent option to Win32 FD for Install/Remove service.
708 kes Always print Heap statistics in FD.
710 kes Remove the -f option from the chown in Makefile.in for more
712 kes Change setting the group in Makefile.in to use chgrp for
714 kes Implement a write_store and read_store to replace
715 dirstore in reserve.c
716 kes Implement a Bacula read/write lock for Python rather
717 than using the Python lock to avoid recursive problems.
718 kes Correct the uninstall directory names in filed/Makefile.in
719 as reported by a user.
721 kes Correct some problems with database creation (new tables).
722 kes Replace a bunch of old 0x%x by %p.
723 kes Get first cut of Migration with Job selection working.
725 kes Change store_bit() to store_bool() for the Spooling in
726 dird_conf.c -kes bug reported by Robert Nelson.
728 kes Correct Makefile bug found by Dan Langille.
730 kes Correct Makefile for Solaris /bin/sh
731 kes Correct mtx-changer.in for Solaris /bin/sh
732 kes Abort if a conf resource does not have a Name =
734 kes Change the name of the regex program to bregex.
735 kes Add the bwild program to the tools directory. It is similar
736 to the bregex program.
737 kes Implement create bregex.h and bregex.c in src/lib from the
738 Python regexp program.
739 kes Use the new bregex.c to implement Regex expressions on Win32.
741 kes More work on migration.
742 kes Implement wild program in tools directory for testing
743 wild-cards. Almost identical to the regex program.
744 kes Up port VSS single thread locking code.
745 kes Replace N_(..) by NT_(...) to inhibit translation of
747 kes Modify Makefile to change the permissions on Working Directory
748 to 770 if the directory is created.
749 kes Do not fail the Makefile if changing the permissions or
750 owner/group on WorkingDir fails.
751 kes Remove early selection of Scratch Volumes in the recycling
753 kes Correct the old recycling algorithm so that Scratch Volumes
754 are selected when looking for a Volume in the changer.
755 kes Correct a typo in the Verify SQL reported by Joe Park.
757 kes Remove automatic case folding on Windows FDs. You must
758 explictly use the 'Ignore Case = yes' option.
759 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
760 scratch volume in an Autochanger early in the 'recycling'
763 kes Make weof() and clrerror() methods of class DEVICE.
765 kes Tweak license to include Microsoft restrictions.
766 kes Move mysql.reconnect to after real_connect(). Thanks to
767 Frank Sweetser for the patch.
768 kes Disallow a backslash in a File = directive (Windows junk)
769 unless the string is quoted.
770 kes Apply Eric's patch to ua_label.c so that daemon protocol
772 kes Add NT_ definition for strings that should not be translated.
773 kes Apply NT_() to ua_label.c
774 kes Remove timed wait for VSS on Win2K3 as it is not yet
776 kes Correct bacula.in script to reference bacula-ctl-xx in the
777 sysconfig directory rather than the bin directory.
779 kes Fix a long standing bug in the bacula start/stop scripts.
780 kes Attempt to add the new bacula-ctl-* files to the rpm.
781 kes Switch to using typeof() for list traversing to avoid
782 as many FC5 g++ compiler warnings as possible.
784 kes Split the bacula start/start script into four files:
785 bacula -kes starts and stops calling other scripts
786 bacula-ctl-dir -kes starts/stops the director
787 bacula-ctl-fd -kes starts/stops the File daemon
788 bacula-ctl-sd -kes starts/stops the Storage daemon
790 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
791 kes Correct editing of JobId from int to int64 in fd_cmds.c
792 kes Eliminate FileSet name race with bash_spaces() and multiple
793 threads by bashing in a local.
794 kes Fix error return from 'use storage' to print a correct error
795 message rather than nothing.
796 kes Correct false re-read last block error message when two jobs
797 are simultaneously writing at the end of a tape.
798 kes Simplify exit conditions in the reserve.c code to avoid
799 possible non-release of reservation_lock().
800 kes Suffle lock order in reserve to avoid deadlock between
801 reservation lock and device mutex.
803 kes Initialize jcr mutex before first use. Thanks to Thorsten for
804 tracking this down for me !!!! as it broke the Win32 build.
806 kes Integrate addition of line count limitation to bsmtp -l from
807 Sebastian Stark <stark at tuebingen.mpg.de>
809 kes Implement regex test program in tools directory.
810 kes Attempt to fix time problem with bsmtp with foreign langs.
811 kes Add strip_trailing_newline() submitted by user.
812 kes Implement regex matching in migrate.c
814 kes Fix bug #537 to allow arbitrary time to mount a volume for
815 restore, if polling is turned on.
816 kes If dir_user or dir-group is specified in ./configure apply it to
817 the working-dir. Fixes bug #533.
818 kes If rescheduling a job cancel the previous incarnation with the SD.
819 Fixes bugs #566 and 557.
820 kes Fix bug #567 do_message() definition type conflict.
823 kes Add more jcr methods and make mutex and use_count private.
824 kes Create lock/unlock methods for jcr.
825 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
826 records to get to seek position.
827 kes Integrate patch from bug #561 to correct conio.c signal definitions.
828 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
829 terminates correctly by doing pthread_kill(). Do not destroy
830 SD cond wait variable between executions of the job. Use local
831 mutex for cond variable to avoid blocking jcr chain. Fix poor
832 use of jcr use count in jobq.c for restarted jobs.
833 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
834 lib/jcr.c -kes prevents locking the jcr chaing.
835 kes Apply patch from bug #564, which corrects listing volumes with
836 multiple autochangers. Apply same fix to next volume list.
837 kes Fix bug #562 where restore bootstrap file is not unique.
838 kes More details in implementing David's migration syntax proposal.
839 kes Save and restore dcr when swapping drives so that if we have
840 a write dcr it is not lost.
841 kes Use new routine lock_reservations() to lock the reservations
842 system, and call it while looking for a volume in askdir.c.
843 This could possibly fix bug #543.
844 kes Stop SD command loop if job is canceled.
847 kes Remove old code from findlib/create_file.c
848 kes Rename mac.c migrate.c
849 kes Add user friendly display of VolBytes in job report.
850 kes Rename target... to previous... to make it a bit easier to
852 kes Add selection type and selection pattern to Migration (idea
853 given by David Boyes).
856 kes The po files should now be current.
857 kes Fix new sql_use_result() code to properly release the
858 buffers in all cases.
859 kes Use the keyword ujobid to mean the unique job id; job or jobname
860 to mean the Job name given on the Name directive, and jobid to
861 be the numeric (non-unique) job id.
862 kes Allow listing by any of the above.
863 kes Add the user friendly job report code for reporting job elapsed time
864 and rates with suffexes from John Kodis <kodis at comcast.net>.
865 kes Add Priority and JobLevel as Python settable items.
866 kes Use TEMPORARY table creation where the table is created by
868 kes Add new code submitted by Eric for waiting on specific jobid.
869 kes Add ACL checking for the dot commands.
870 kes Fix restore of writable FIFOs.
871 kes Fix a bug in bpipe where the string was freed too early.
873 kes Modify the Python class examples to inherit object -kes new way
874 of defining classes. Patch from Felix Schwarz.
875 kes Implement jobuid to replace old usage of job in keywords as
876 suggested by Eric Bollengier.
877 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
878 wait (wait for all jobs to stop)
880 wait jobuid=unique id
882 kes Implement write variables for Python to set Priority (anytime), and
883 Job Level, only during JobInit event.
885 kes Fix the block listing bug pointed out by Arno.
886 kes Update the po files at Eric's request.
888 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
889 accept time qualifiers.
890 kes Make catalog respect ACL.
891 kes Add recycle count to Media record.
893 Changes to 1.39.6-beta1 24Feb04
895 kes Add Rudolf Cejka's new rc-chio-changer.
896 kes Implement pulling Volume from Scratch Pool if the
897 Volume is in the autochanger.
898 kes Implement additional command arguments for update Volume.
902 kes Back port changes to 1.38.5
903 kes Fix recycle SQL for StorageId.
904 kes Fix misplaced quote in mtx-changer script.
906 kes Note. Your database must be updated, or you must create
907 a new database. I have not yet incremented the database level.
908 kes Add Location table.
909 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
911 kes Implement create/get mac record in database for adding extended
912 Migration data to the job record.
913 kes Add new MAC table to update/make database scripts.
914 kes Return Storage name used when getting VolumeNames for a job.
915 kes Change bsr file keyword Storage to Device, which is more accurate.
916 kes Ensure that Mac records are pruned/purged.
917 kes Tweak SD tools to deal with changing media type.
918 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
919 kes Pass pointer to dcr pointer to acquire_device_for_read() so
920 that the subroutine can switch devices, and hence dcrs.
921 kes Modify the multiple MediaType read code to re-use the same
922 dcr when switching devices. This makes the code much more
924 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
925 from a table for restore.
926 kes Add Storage name to VolParams, but it really should be Device.
928 kes Add disk-changer to scripts directory + configure/Makefile
929 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
930 kes Implement store_bit scanner to replace store_yesno. Mostly done.
931 kes Implement new store_bool that stores in a bool.
932 kes Add true/false to yes/no conf directives.
933 kes Make first cut at changing appropriate store_yesno to store_bool.
934 kes Complete implementation of Pool storage devices.
935 kes Move starting clones to job.c
936 kes Move create_restore_bootstrap_file() to job.c
937 kes Make copy_storage() more general to be able to handle
939 kes Cleanup a lot of migration code for manual running, including
941 kes Move getting a scratch Volume into a subroutine.
942 kes Make all places a Volume that is added to a pool to
944 kes Fix bug in autochanger recycle code (improper edit 64 bit).
945 kes Fix segfault in restore command when no value specified.
946 kes Start adding code to handle multiple MediaTypes in restore.
947 kes Eliminate race condition in getting Volume name for
948 two drive autochanger.
949 kes More debug code in autochanger.
950 kes Add storage keyword to bootstrap file, add parsing.
951 kes Move slot in bsr file into Volume record as there will be
952 a different slot for each Volume.
955 kes Implement Pool storage overrides.
957 kes Implement first cut of Migration.
958 kes Implement mysql_use_result() from patch by Karl Hakimian.
959 This reduces significantly the memory consumption during
960 the restore tree building, and hence runs faster too.
961 kes Implement StorageId patch supplied by user (reggie) in bug
962 #536. This should permit Bacula to work correctly with two
964 kes Implement Job listing variations suggested by a user.
965 kes Move updating bootstrap code in backup.c to subroutine
966 update_bootstrap_file().
967 kes Add new job status elapsed time and bytes written user
968 friendly job report output patch sent by John Kodis
969 <kodis at comcast.ne>.
970 kes Implement a storage list in Pools.
971 kes Separate out setup_job() code from run_job().
972 kes Get migration working -kes lots of changes in mac.c in both
974 kes Apply patch from user (Eric Bollengier I think) that fixes a
975 DIR crash when no arguments are supplied to a dot command.
976 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
977 kes Fix command arg name->volume in label command of gnome-console.
978 kes Fix SD acquire.c to release correct DCR by explicitly testing
979 on the dcr address rather than trying to devine if it is a read
980 or write dcr. This failed in error conditions when the device was
984 kes Apply user supplied patch for more readable rate output
986 kes Continue implementing migration.
987 kes Implement support for removable filesystems in SD.
988 kes Ensure that btraceback scripts can be read by anyone.
989 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
990 kes Correct bug where canceling restore before the FD contacts
991 the SD causes the drive to be left in read mode.
992 kes Move ofline_or_rewind into DEVICE::close().
993 kes Eliminate close_device.
994 kes Convert several dev subroutines to methods (e.g. bsf,
996 kes Eliminate force_close_device().
997 kes Implement Device Type directive in Device resource that
998 can have values File, Tape, Fifo, DVD, or Prog.
999 kes Add has_cap() method to Device.
1002 kes Add patch from bug #527 to allow RedHat user to specify
1003 options/user/group for starting each daemon in
1004 /etc/sysconf/bacula.
1006 kes Add two new queries to query.sql provided by Arno. One
1007 list volumes known to the Storage device, and the other
1008 lists volumes possibly needing replacement (error, ...).
1010 kes Add periodic (every 24 hours) garbage collection of memory
1011 pool by releasing free buffers.
1013 kes Correct bug counting sized (for display only) in smartall.c
1014 kes Print FD mempool stats if debug > 0 rather than 5.
1016 kes Make db_lock() mutex error fail the job rather than abort
1017 Bacula. Canceling the job caused the mutex to fail.
1018 kes Correct bug in alist.c that re-allocated the list if the
1019 number of items goes to zero.
1020 kes Move the reservation system thread locking to the top level
1021 so that one job at a time tries all possible drives before
1023 kes Implement a reservation 'fail' message queue that is built
1024 and destroyed on each pass through the reservation system.
1025 These messages are displayed in a 'Jobs waiting to reserve
1026 a drive' list during a 'status storage='. Note, multiple
1027 messages will generally print for each JobId because they
1028 represent the different problems with either the same drive
1029 or different drives. If this output proves too confusing
1030 of voluminous, I will display it only when debug level 1
1031 or greater is enabled in the SD.
1033 kes Add enable/disable job=<job-name>. This command prevents
1034 the specified job from being scheduled. Even when disabled,
1035 the job can be manually started from the console.
1036 kes During 'update slots' clear all InChanger flags where the
1037 StorageId is zero (old Media records).
1039 Beta release 1.38.4:
1041 kes Fix autochanger code to strip leading spaces from returned
1042 slots number. Remove bc from chio-changer.
1043 kes Back port a bit of 1.39 crypto code to reduce diffs.
1044 kes Fix first call to autochanger that missed close()ing the
1045 drive. Put close() just before each run_program(). Fixes
1048 kes Add PoolId to Job record when updating it at job start time.
1050 kes Pull in more code from 1.39 so that there are fewer file
1051 differences (the new ua_dotcmds.c, base64.h, crypto.h
1052 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1053 util.c. Aside from ua_dotcmds.c these are mostly crypto
1055 kes Implement new method of walking the jcr chain. The
1056 incr/dec of the use_count is done within the walking
1057 routines. This should prevent a jcr from being freed
1058 from under the walk routines.
1063 kes Start implementing Verify list output.
1064 kes Move the suitable_drive flag to a better place to prevent
1065 premature termination of the reservation if all drives
1066 are busy -kes should fix Arno's diff/inc pool failures.
1068 kes Add mutex to single thread VSS code in Win32.
1070 kes Simplify code in askdir.c that waits for creating an appendable
1071 volume so that it can handle multiple returns from the wait
1073 kes Modify the wait code to permit multiple returns.
1074 kes Return a zero when "autochanger drives" is called and
1075 it is not an autochanger.
1076 kes Make rewind_dev() a method taking a DCR as an argument.
1077 This permits closing and reopening the drive if the
1078 rewind fails as happens if the drive was loaded while the
1079 file descriptor was open. This refreshes the file descriptor.
1080 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1081 if the device is open or not. This should eliminate
1083 kes Return error if reserve cannot find at least one suitable device.
1084 kes Make wait_for_sysop() return correct state information.
1085 kes Fix Win32 state file problem. write was not using compat
1086 code. This should fix bug #500.
1088 kes Modify gui on command to set only GUI mode and not batch.
1089 kes Modify .messages command to always print messages regardless
1091 kes If GUI mode is on, suppress automatic printing of
1093 kes Delete old bnet packet code.
1094 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1095 wx-console. -kes not implemented because bconsole must be updated.
1096 kes Modify restore command in wx-console to set gui on and to use
1097 only .messages instead of messages. Hopefully this fixes bug
1099 kes Fix seg fault in exit of acquire when canceling a job --
1100 reported by Wolfgang Denk
1101 kes Pull in latest reservation system changes from 1.38
1102 kes Make .messages command always print messages regardless
1103 of the automessages flag.
1105 kes Fix seg fault if user labels a drive directory bug #513
1106 kes Remove quotes around Version as it breaks things.
1108 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1109 kes Apply sparse code fix for raw drives and fifos. Bug 506
1110 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1112 kes Correct reservation system to do a last ditch try
1113 for any mounted volume, then anyone anywhere.
1114 kes Add quotes around table Version because of
1115 error in MySQL 4.1.15 -kes bug report submitted.
1116 kes Correct some minor problems with btape in the fill
1118 kes Updates to ssh-tunnel from Joshua Kugler.
1119 kes Added a report.pl program from Jonas Bjorklund.
1120 kes Simplify the O_NONBLOCK open() code for tape drives,
1121 and always open nonblocking.
1122 kes Do not wait for open() if EIO returned (shouldn't happen).
1123 kes Eliminate 3 argument to tape open().
1124 kes Correct the slot # edited in the 3995 Bad autochanger unload
1126 kes With -S on bscan (show progress) do not divide by zero.
1128 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1129 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1130 kes Remove unused code in wait_for_device.
1131 kes Make wait_for_device() always return after 60 seconds of wait.
1135 kes Add stubs for non-crypto build.
1137 kes Use localhost if no network configured
1139 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1140 kes Remove debug print.
1141 kes Add bail_out in error during state file reading.
1143 kes Merge changes made to 1.38.3 into HEAD
1144 kes Add stubs for pygtk-console code
1145 kes Create Makefile.in for pygtk-console code
1147 kes Merge updates into 1.38 branch
1148 kes Update specs to include mysql4 define.
1149 kes Fix when attributes are sent, must be after binit().
1150 kes Stop read_record() if status not ok in second loop.
1151 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1152 and partial records in read_record(). This allows bscan
1153 to get FileIndex at EOT correct.
1154 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1156 kes Fix Win32 built to work with new crypto code.
1157 kes Apply patch supplied by user (slightly modified) to fix
1158 correct detection of holes in block devices and FIFOs.
1160 kes Apply patch supplied by user (slightly modified)
1161 to fix SD hang with multiple pools and bad client
1162 IP. Fixes bug # 508.
1164 kes Add nagios plugin to the examples directory. Submitted by
1166 kes Remove warning message about multiple saves of hardlinked files
1167 from find_one.c as it can generate too many warning messages.
1168 kes Modify most restore error messages to be queued so that they
1169 appear at the end of the job rather than mixted with the restore
1170 listing where they could be "lost".
1172 kes Reset timeout values before select() per patch from
1173 Frank Sweetser for problems with non-blocking sockets.
1174 kes Unlink the state file if either reading or writing it gets
1175 errors. Hopefully this will fix Win32 exit problems.
1176 kes Add sanity check in append.c to ensure that dcr is not NULL.
1177 This can happen if multiple drive autochanger SCSI control
1178 channel and drive indicies do not correspond.
1180 kes Get next volume from Scratch pool before creating a volume.
1181 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1182 kes Remove argument from create_bacula_database for SQLite as it
1184 kes Add back index code so that two drive autochangers can get
1186 kes Change a bunch of debug levels to aid debugging autochangers.
1187 kes Fix reservation so that mutexes are properly applied.
1188 kes Rework reservation algorithm so that two drives can be used
1191 kes Landon merged his data encription changes into the HEAD
1192 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1193 If this patch is applied, the number of days can be specified with
1194 "list nextvol days=xx"
1196 "status dir days=xx"
1197 My use case is to be able to preview the next scheduled job (and the
1198 next tape to be used) on fridays if there are no scheduled jobs during
1202 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1203 kes Fix malformatted bnet error message that caused seg fault
1205 kes Applied user patch to improve README.vc8 in src/win32.
1207 kes Add Migrate, Copy, Archive Job types (some where there)
1208 kes Correct some more editing of JobId's (for 64 bit compatibility).
1209 kes Ensure that StorageId is stored in Media record when ever possible.
1210 kes Add Migration Job to Job.
1211 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1212 Next Pool to Pool resource.
1213 kes Add more code to mac.c (migration archive copy).
1214 kes Change Start Storage daemon job to require read and write storage
1216 kes Pass read storage data to SD as well as write storage data.
1217 kes Remove old code from winservice.cpp
1218 kes Break on error in scan.
1219 kes Fix typo in signal.c
1220 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1221 kes Cleanup how find_device() works.
1222 kes Add read output to Status in SD.
1225 kes Add red-black btree routines
1227 kes Remove abs() in bfile.c so that it compiles on Solaris.
1230 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1231 kes Fix bnet-server bug found on OpenBSD. Bug #486
1232 kes Fix cancel failure bug. Bug #481
1233 kes Fix failure when Pool name has spaces. Bug #487
1234 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1235 kes Fix a couple of free()s in src/filed/acl.c
1236 kes Fix memory overrun in bfile.c in building OS X resource
1237 fork filename. Bug #489
1238 kes Add Pool name to SD status output.
1240 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1241 kes Make sure to set storage before trying to set drive.
1242 kes Add bacula_mail_summary.sh to examples directory. It makes
1243 a single email summary of any number of jobs. Submitted
1245 kes Make sure when we do a mount to unblock the device even
1246 if the drive could not be opened.
1248 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1249 and correct a few minor problems to make it build on Linux.
1251 kes Remove delete of CVS from all Makefiles
1252 kes Fix seg fault when clicking on Add button in wx-console
1253 restore panel. Bug #470.
1254 kes Fix copyright date and URL typo -kes bug #468.
1255 kes Change autostart install for FreeBSD to look for rc.conf
1256 rather than rc.local as suggested fix for bug #466.
1257 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1258 grant on status. Bug #465
1259 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1260 update script. Bug #464
1261 kes Tweak #ifdefing a bit in new Win32 stream code.
1262 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1263 kes Add documentation of performance #defines
projects / bacula / bacula / blob