1 Technical notes on version 1.39
5 kes Implement Enabled on update slots.
7 kes When doing a label, pass the VolBytes back to the Director,
8 which puts it in the catalog.
9 kes Print an error message if the user attempts to prune an
11 kes Need to start using %ld when sscanfing 32 bit values.
13 kes Correct the counting of VolCatBytes for DVDs.
14 kes Add code to mount.c to require that VolCatBytes corresponds to
15 what is actually found when doing an append.
16 kes Update freespace only after writing on the DVD.
17 kes Remove code that blows away the current part in the spool file.
19 kes Apply new dvd-handler patch from Richard Mortimer.
20 kes Tweak so that debug level 20 shows only DVD commands.
21 kes Correct spooled_part flag in dev.c close() so that it is cleared
22 when the spool file is deleted or does not exist.
23 kes Print part number in read_records when eof hit (restore).
25 kes Make find with no args in tree restore return error rather than
26 stopping the selection. Fixes bug #665
27 kes Rework DVD writing to ensure that the last part is written
28 on open_next_part when dealing with a spool file.
29 kes Correct the lseek_dev() routine to handle end point correctly
30 (bug introduced by me).
31 kes Allow part number to exceed num_dvd_parts in lseek_dev().
33 kes Apply dvd-handler patch from Richard Mortimer.
34 kes Apply dvd error check patch from Richard Mortimer.
35 kes Apply bpipe race patch from Richard Mortimer.
36 kes Rework how DVD labels are handled and set append only
37 when part > num_dvd_parts.
39 kes Rework many features of DVD writing and reading. Added many error
40 messages. Most importantly changed part to represent the current
41 part number base zero. This makes current DVD writing incompatible
42 with previous version.
44 kes Add host:port to connect failure messages to FD and SD from Dir.
45 kes Add WhereACL to console ACL list. If nothing is specified, only
46 the default is permitted for restore. Otherwise, *all* allows any
47 path, or you can specify permitted paths. This should allow control
48 over where users can restore files. This is untested.
49 kes Modified message to add a ? (as in loaded?) when querying the autochanger
50 for what Slot is loaded.
51 kes Fixed the use of Slot, so that is more correctly maintained, thus
52 eliminating unneeded duplicate calls to determine what Slot is loaded.
55 kes Install man pages with 'make install'
56 kes wx-console crashes because of differences between Bacula and wxWidgets
57 malloc()/free(). Tweek wx-console to use bmalloc()/bfree() for Bacula
59 kes correct improper indenting in wx-console/console_conf.c
60 kes update wx-console header copyrights
61 kes Fix bug #658 where wx-console mangles file/directory names containing
64 kes Add Media.Enabled flag to client backups for dotcmds.c
65 kes Enforce Media.Enabled=1 for a current restore to work.
66 kes Require restore case 3 to have sqlquery permission to work.
67 kes Remove obsolete del_MAC sql command.
68 kes Ensure that bscan creates Volumes with Enabled=1.
70 Version 1.39.20 beta released:
72 kes Correct missing Client table reference in SQL pointed out by
75 kes Fix Win32 build (new entrypoint, start baculafd).
77 kes Add -n option to bconsole to turn off conio.
78 kes Print JobIds to be migrated in Job Report.
79 kes Add additional user supplied notes to the messages part of
80 bacula-dir.conf concerning multiple email addresses.
81 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
82 kes Add more recent Feature requests to Projects file.
84 kes Apply Maritn's fix to src/win32/Makefile.
85 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
86 kes Implement pruning for Migration and migrated jobs.
87 kes Implement PoolOccupancy migration.
88 kes Implement PoolTime migration.
90 kes If doing a mount, look for a slot, and if specified pass it to
91 the SD so that it can load the autochanger.
92 kes Return DVD=1 flag if a label command is done to a DVD. This
93 permits setting VolParts to 1.
94 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
95 rework ua_label code based on DVD media type to use DVD flag returned.
97 kes Eliminate some compile warnings in dird_conf.c
98 kes Format the bytes field in the terminated jobs part of the status
99 command for the three daemons with suffixes to reduce print size
100 of backup bytes. Suggested by a user.
101 kes When not descending into a directory, print the File= name that
102 triggered it -- makes why not descending a bit clearer.
103 kes Do not unload autochanger when doing a list command -- basic code
104 from Eric Bollengier.
106 kes Fix bug #462 incorrect error message printed when client script called
107 from File= was not found.
108 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
109 do a rewind on Solaris when no tape is in the drive (Solaris does not
110 have the detailed errno found on Linux). Added Solaris specific code.
111 Note, this may apply to other OSes as well.
113 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
114 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
115 fix bug 648 - update sqlite script patches, lock out gnome2console
116 builds for platforms with gtk+ < 2.4.
117 Updated build_rpm.sh - add remote source directory, add switch for
118 signing, refine file names.
119 Updated spec file again for Mandriva build as they have this curious
120 custom of silently converting all manpages to bzip2 format just before
121 the final packaging step.
123 rbn Fixed the Windows Makefiles so that they won't accidently try and
124 pickup binaries for the Unix build. This allows both the Unix
125 build and the Windows build to be built in the same tree without
126 interfering with each other.
127 rbn Fixed error handling and cleaned up mtx-changer.cmd.
128 rbn Added the rest of the database scripts. These are installed but are
129 not yet editted for variable replacement.
130 rbn Broke out the cats functionality from bacula.dll and put into new
131 separate dlls for each database type. At installation time the
132 correct one is copied to bacula_cats.dll.
133 rbn Eliminate the need to install the mysql.dll on client only builds.
134 rbn Moved dird/sql_cmds.c into the cats directory so all the database
135 specific #ifdefs were in the cats directory.
136 rbn Added a new sql_cmds.h with all the declarations for the variables
137 exported from sql_cmds.c.
138 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
139 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
141 kes Correct improperly formated list command output reported by Dan.
143 kes Correct despool time calculation.
145 kes Remove previous changes to compat.cpp as they create problems.
146 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
147 kes Attempt to fix problems with the msg_queue crashing on Solaris
148 when Bacula is terminating, but problems remain.
149 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
150 name editing problems with too many \\?\es.
151 kes Fix some Bacula source code stlye problems in compat.cpp.
152 kes Add debug code to compat.cpp and convert non-Bacula debug code
155 kes Change the name of the technical notes file from kes-1.39 to
156 technotes-1.39. Prefix my messages with 'kes '.
157 kes Allow dequeue_messages() to be called twice. Should fix bug
159 kes Add Job type to bscan Job information output.
161 kes Update copyright date in program files, and for the most part
163 kes Implement %q in bsnprintf.c apparently I forgot it.
165 kes Make disk-changer sed command compatible with FreeBSD.
166 kes Make a first cut at a ReleaseNotes and ChangeLog for a
168 kes Make make clean decend into the src/win32 directory.
169 kes Fix some #ifdefing so that Solaris and FreeBSD compile
170 sys/stat.h was turned off.
171 kes Use suffix editing for new transfer rate messages.
172 kes Attempt to come up with a workaround which seems to be an OS
173 bug where write() returns EBUSY. IMO this should not happen.
174 It triggered in truncatebug test. The workaround retries using
176 kes Eliminate a strerror() call in a class method that failed with
178 kes Use rm -rf rather than rmdir to delete the src/win32/release
179 directory during make clean.
181 kes Make bscan ignore ACL streams.
182 kes Update projects files with new Feature Requests.
183 kes Generate current English and French manuals and upload
185 kes Update the home page to include the new British/French flags to
186 switch between translations. Work done by Alexandre Baron.
187 kes Make disk-changer script print an error message if the changer
188 directory is not defined.
189 kes Create a generic DB routine for getting an int (32/64 bit) from
191 kes Add more migration code.
192 kes Add a few more files to .cvsignore here and there.
193 kes Minor fixes for SD write rate and despooling rate.
194 kes Turn off new test code in src/console.c
198 kes Incremented the version number to signify that all of Robert's code
199 for Win32 that was in the branch is now integrated into the HEAD,
200 and that Eric has submitted code that we hope will provide limited
201 backward compatibility with 1.38 file daemons (more testing to be
203 kes I rationalized a few of the names of the variables (mainly jcr names)
204 that are used during migration as keeping three different jcrs at the
205 same time clear in one's head is not easy.
209 eb Tweak new runscript feature to work with 1.38.x FDs.
210 eb Correct crypto.c to fix segfault when restoring an encrypted stream
211 on fd which don't use rsa keys.
212 eb Add yes/no english keywords on localised yes/no questions.
214 kes Several important commits from Robert Nelson for code cleanup and
216 kes Modify console.c so that when conio is enabled, it converts \n to
217 \n\r before outputting to the console. Hopefully this will fix
218 the problems with expect in Perl that Eric saw.
220 kes Change cats/sql.c to elimate %-*s format, which I think is turned
222 kes Add Comment field to llist of a volume.
223 kes Allow true/false in some yes/no questions.
224 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
225 kes Remove a few /n's when scanning commands from another daemon. This
226 permits adding additional fields later.
227 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
228 kes Update README.mingw
230 kes Tweak authentication to work with 1.38.x FDs.
231 kes Tweak catalog make scripts.
232 kes Fix catalog upgrade scripts so that they work.
233 kes Correct despooling debug code to eliminate race condition.
235 kes Add additional fields as specified by Arno to LocationLog.
236 kes Add comment field to the Media record.
237 kes Add Time field to the Log record.
238 kes Correct migration SQL (thanks to Bill Moran) so that it
239 runs with PostgreSQL also.
240 kes Add spooling/despooling info in status output of SD.
242 kes Spend a lot of time integrating mkcdrec with the rescue disk.
243 kes Add VOLMGMT message class for volume management messages (none yet).
244 kes Add CATALOG as a destination. It goes into the LOG table.
245 kes Implement the Log table in the DB.
246 kes Implement the Location Log table in the DB (for user use).
247 kes At Eric's request add a run_scripts() just after blast_data in
250 kes Add Enabled column to Location, correct some typos in DB schemas.
251 kes Correct bug I introduced into RunScripts enum.
252 kes Add log table to Catalog
253 kes Purge original job migrated if the migration terminates normally.
254 kes Cleanup purging of files/jobs so that it is done only in a
256 kes Add new VOLMGMT message class.
257 kes Add Catalog message destination (user conf code remains to be written).
259 kes Modify read_record and friends to properly deal with migration
261 kes Update debug code in read_record.
263 ======================= Warning ==========================
264 Separate read and write storage in Jobs in the Director. This
265 is a major rewrite of some of the low level code and hence has
266 a high probability of introducing bugs.
267 ==========================================================
269 kes Move the job init code up to *before* the job is put into
270 the job queue (resource allocation queue). This permits the
271 job to establish whether it will read or write or do both.
272 kes Add name() methods to all the resource classes.
273 kes Implement separate read and write storage resource
274 allocation/deallocation in jobq.c
276 ======================= Warning ==========================
277 Implemented new method of getting the default Storage from the Media
278 record rather than from the MediaType for restore. As a fall
279 back, if no Storage is defined, use the MediaType. This
280 eliminates most all prompts if there are multiple MediaTypes
281 used. This is an important and fundamental change.
282 ==========================================================
284 kes Add more detail (Storage, Device) to list of volumes printed
286 kes More code in migrate. In particular start multiple jobs if
288 kes Probably overkill, but ensure that the bsr is unique even within a
290 kes Rework bsys.c drop() so that it now should work as expected.
291 kes Update a bunch of old copyrights -kes particularly in .h files.
292 kes Remove src/lib/bshm.c/h
296 ======================= Warning ==========================
297 All hash codes in the database are now kept in world
298 compatible base64 format (no = filling). This means that
299 all FileSets will be updated and if you are running
300 verify jobs, you must do an InitCatalog.
301 Authentication uses the new algorithm, but should be
302 backward compatible with 1.38.x
303 ===========================================================
305 kes Modify the authentication routines so that the 1.39.15 Director
306 always runs with the compatible binary to base64 code (same as
307 the rest of the world). It will however detect if an SD or
308 FD is running the old code and if that is the case, will use
309 the old algorithm for authentication. However, all consoles must
310 use the compatible algorithm, and all data entered into the database
311 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
312 use the compatible algorithm.
313 kes Rename the cram_md5 routine names to be slightly more appropriate
314 to what they are doing (challenge and respond).
315 kes Robert committed his #ifdef and header cleanup.
317 kes Fix a complier warning in files/backup.c
318 kes Cleanup NOT NULL vs DEFALT 0 in database creation.
320 kes Robert committed his low impact changes.
321 kes I removed a size_t from the jcr.h definition.
322 kes Update the tape regression scripts (still to be tested).
323 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
324 kes Require done or quit to exit from in memory tree restore.
326 kes Write install/uninstall of new manpages. There are now a
327 pile of man pages. Some of which need a lot of work.
329 ======================= Warning ==========================
330 The --mandir ./configure option now points to the top level
331 man directory. The man files will be installed under
332 mandir/man8 and mandir/man1 as appropriate.
333 ==========================================================
335 kes Add complete text of GPL to LICENSE.
336 kes Implement job report that indicates where Storage and Pool
337 came from -kes with overrides and Pool storage and NextPool,
338 it is all very complicated.
339 kes Create a few common subroutines for backup.c and migrate.c
340 kes Eliminate warning messages from tray-monitor.c
342 kes Apply fix for scheduler for missing unlock_jobs().
343 kes Clean out autoconf caches before rebuilding configure
344 kes Fix the FreeBSD pthreads lib define updated by Dan.
345 kes Add missing semicolon in src/console/console.c
346 kes Add Robert's enhanced version of build-win32-cross-tools
347 as well as his patch file.
348 kes Note, the new gcc options are likely to break building of
349 wx-console or the tray-monitor ...
351 kes Implement Robert's suggestion to suppress printing compile lines.
352 kes Detect GCC correctly (I hope)
353 kes If using GCC (actually g++) add the following compiler flags
354 -fno-strict-aliasing -fno-exceptions -fno-rtti
356 ===================== Warning =============================
357 Turn on new bsnprintf() code. This could cause print output
359 ===========================================================
361 kes Fix crypto when not using openssl. I previously overlooked this.
362 kes Eliminate crypto type punning problems by eliminating void * and
363 using uint8_t * instead.
364 kes Harden authentication failure in FD by single threading errors
365 and forcing a 6 second wait.
367 ===================== Warning =============================
368 Removed "Accept Any Volume" directive.
369 ===========================================================
371 kes Major cleanup and simplification of regress using shell functions
372 (more tests to be converted to new format)
373 kes Add detection of 64 bit Irix as indicated by user.
374 kes Increment catalog database id from 9 to 10.
375 kes Add a few of the new database fields to the various C++
377 kes Implement code to fill in the most important new fields (e.g.
379 kes Ensure that most of the new fields are in create/get/insert/update.
380 More work to be done.
382 kes Update some very old licenses in src/cats.
383 kes Modify the database format for handling Migration jobs:
384 Add PriorJobId, RealEndTime to Job table
386 Remove Stripe from JobMedia record (not used, wasting space)
387 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
388 Add Cost to Location table.
389 kes Delete mac_record subroutines.
390 kes Add new table values to create/update/get routines as appropriate.
391 kes Update the update_tables and make_tables scripts.
392 kes Make a first cut in using a union where multiple pointers (actually
393 pointers to pointers) are stored.
394 kes Make some changes to base64.c suggested by Robert and others and add
395 a small amount of documentation.
396 kes Add some changes suggested by Peter for Solaris (bregex...)
397 kes Make runscript.h always built because it needs to be pulled into
398 more places. In particular its RES was left out of a union.
399 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
400 This makes it slightly easier to detect uninitialized variables.
402 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
403 sometimes creates install problems.
404 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
405 Nelson's code. More to do.
406 kes Convert a few store_bit to store_bool in filed_conf.c.
407 kes DVD tweak to block.c as supplied by Uwe Muessel.
409 kes Modify configure.in to check for typeof().
410 kes In findlib/attribs.c use typeof instead of templates if possible.
412 kes Implement partial error messages for src/filed/acl.c
413 kes Fix return code to fail when doing update barcodes and
414 Pool resource is not found. This previously caused Volumes
415 to be labeled as cleaning tapes.
416 kes Small updates to projects.
418 kes Add Eric Bollengier patch for new RunScript directive. It breaks
419 compatibility between dird and fd.
421 kes Prevent DVD code from rewriting label if the device cannot be
423 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
424 fix Debian build bug.
425 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
426 kes Integrate manpages contributed by Jose Luis.
427 kes Update projects file.
428 kes Add manpages Makefile.in to configure.in
429 kes Remove installation of bacula.8 in scripts directory.
431 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
433 O_NOATIME is a open() flag which makes it possible to read a file without
434 updating the inode atime (and also without the inode ctime update which
435 happens if you try to set the atime back to its previous value). It also
436 prevents a race condition when two programs are reading the same file, but
437 only one does not want to change the atime. It's most useful for backup
438 programs and file integrity checkers (and bacula can fit on both
441 Recent versions of the Linux kernel and glibc have support for it (the
442 glibc support being mostly copying the O_NOATIME definition to
443 bits/fcntl.h). If there's no support for it on the kernel, trying to use
444 it does nothing (since the kernel ignores unknown flags).
446 If the kernel has support for it, trying to use it either works, fails
447 silently (mostly in remote filesystems), or returns errno=EPERM (if you
448 are not either the owner of the file or root). A simple way to prevent the
449 failure is to open the file without the flag and set it later with
450 fcntl(F_SETFL), ignoring any EPERM errors.
451 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
452 of restarted jobs to complete (due to a destroyed pthreads conditional
453 variable used by the message thread).
454 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
456 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
457 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
458 colons in query.sql file.
459 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
460 not to create orphans.
461 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
462 in restore long listing.
463 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
464 of incorrect MarkedId.
465 kes Apply patch from adioso bug #616 to correct text in manual (replace
466 Director with File daemon).
467 kes Rework a few of the zlib changes so that they build properly.
470 kes Move DIR "run" command to SD before starting the message thread
471 as suggested by Cristopher Hull to avoid a race deadlock from
472 two threads using the bsock structure.
473 kes Modify LICENSE to correct some problems pointed out by Debian.
475 kes Correct EOF with no \n lex.c problem.
476 kes Tweak compat.h compat.cpp and merge with apcupsd
477 kes Add additional INFO messages if autochanger cannot be used.
480 kes Simplify Win32 Makefile
481 kes Correct count of buffers/bytes used by smartall.c
482 kes Updated compat.h after porting apcupsd to MinGW.
484 kes Work on getting wx-console building on MinGW. wxWidgets now builds
485 started adding Makefile ...
486 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
488 kes Reloading a bad configuration file doesn't kill director any more.
489 Thanks to fix from Eric Bollengier.
491 kes Fix problem of accents with new Win32 code.
492 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
493 works in the MinGW build with the exception that there
494 is a problem with accented characters -kes i.e. there is
495 some mapping problem with wide characters.
496 kes The code no longer compiles with Microsoft VC++.
498 kes Start implementing Christopher's St.Bernard code.
499 kes Add Christopher's mods for opening files.
500 kes Strip \r \n from Win32 error messages (Christopher)
501 kes Add more info about Win32 system if unknown (Christopher)
502 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
503 kes Fix a number of incorrect strings marked for translation, when
504 they should not be (e.g. commands).
505 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
506 Patches supplied by user in bugs #608 and #599.
507 kes Use most recent of st_ctime and st_mtime in restore tree DIR
508 listing. This fixes some problems with Win32 printing incorrect
510 kes Correct the clock shift comm time calculation between the DIR
511 and the FD. It was added rather than subtracted.
512 kes Strip all backslashes in filenames to be restored on Win32
513 machines -kes the names should all be in Unix format, and if
514 there are any backslashes it is most likely due to an improper
515 FileSet definition, and the files will not otherwise be
517 kes Remove lib/regex.c (replaced by bregex.c).
518 kes Delete src/win32/License.txt
519 kes Modify installer to install LICENSE
521 kes Fix bug in build-win32-cross-tools script reported by Howard
522 kes Implement cross compiled bconsole
524 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
525 kes Write first cut of README.mingw32
526 kes Add back ua_label barcode fix from Rufolf Cejka.
527 kes Integrate the majority of the Mingw cross-tools submission
528 made by Howard Thomson. Everything compiles, with zlib, openssl,
529 and VSS turned off. Linking needs a pthreads library ...
531 kes Add 'Dir Status' button to the gnome console.
532 kes More work on migration.
533 kes Restore non-compatible base64 coding to permit compatibility.
534 kes Display heap stats in Storage daemon without debug level.
536 kes Integrate most of the MinGW changes -kes more to do.
538 kes Implement using pg_config for finding PostgreSQL files.
539 Fixes bug #600. Patch supplied by user.
540 kes Remove -t option from mktemp in mtx_changer.in and use
541 working directory. Fixes bug #578.
542 kes Update job start time after the any run before job so that
543 files created by the script are only backed up once. Fixes
545 kes Strip trailing newline only from filenames entered in
546 the restore command when reading a file. This permits
547 the user to enter filenames with trailing spaces. Fixes
548 bug #549. The user supplied a patch that I modified slightly.
549 kes Use the most recent time (st_mtime, st_ctime) in the dir
550 command in restore. This gives the user a better idea of what
551 the newest file really is. This fixes bug #574. The fix
552 was suggested by the user.
553 kes Implement a compatible version of base64. This permits external
554 programs to duplicate Bacula's base64 algorithm using standard
555 routines. This fixes bugs #296, and 565. Patch submitted by
557 ================= Note ========================
558 Previous Signatures stored in the database are no longer
559 compatible with this. The main downside is for Verify jobs,
560 and doing an InitCatalog run will fix the problem. Also, the
561 authentication between the deamons is changed, so all daemons
562 must be simultaneously upgraded.
563 ==============================================
564 If you don't like this fix, set:
565 const bool compatible = true;
567 const bool compatible = false;
570 kes Ensure that DB signature is never NULL.
571 kes Ensure that DB table names are not translated.
572 kes Fix scheduler to handle time skew (eg daylight savings).
573 kes Fix scheduler to use lock_jobs() to avoid most problems
574 with reload. Window is now milliseconds.
576 kes Apply patch from Christopher Hull
577 kes Allow multiple connections to database with different
579 kes Invalidate the scheduler when doing a reload. Fixes seg
580 fault, but still 60 second window.
581 kes Additional info in Reschedule message.
582 kes Use set_jcr_job_status() everywhere to prevent loss of
584 kes Display peer IP in FD if error from connecting DIR.
585 kes Don't increment file count for DIRBEGIN.
586 kes Replace illegal characters in Win32 filename by _.
587 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
588 kes Hash hard link filenames rather than linked list.
589 kes Fix for security failure in chdir on Win32.
590 kes Add CreateDirectoryA/W win32 API entry points.
591 kes Add /silent option to Win32 FD for Install/Remove service.
592 kes Always print Heap statistics in FD.
594 kes Remove the -f option from the chown in Makefile.in for more
596 kes Change setting the group in Makefile.in to use chgrp for
598 kes Implement a write_store and read_store to replace
599 dirstore in reserve.c
600 kes Implement a Bacula read/write lock for Python rather
601 than using the Python lock to avoid recursive problems.
602 kes Correct the uninstall directory names in filed/Makefile.in
603 as reported by a user.
605 kes Correct some problems with database creation (new tables).
606 kes Replace a bunch of old 0x%x by %p.
607 kes Get first cut of Migration with Job selection working.
609 kes Change store_bit() to store_bool() for the Spooling in
610 dird_conf.c -kes bug reported by Robert Nelson.
612 kes Correct Makefile bug found by Dan Langille.
614 kes Correct Makefile for Solaris /bin/sh
615 kes Correct mtx-changer.in for Solaris /bin/sh
616 kes Abort if a conf resource does not have a Name =
618 kes Change the name of the regex program to bregex.
619 kes Add the bwild program to the tools directory. It is similar
620 to the bregex program.
621 kes Implement create bregex.h and bregex.c in src/lib from the
622 Python regexp program.
623 kes Use the new bregex.c to implement Regex expressions on Win32.
625 kes More work on migration.
626 kes Implement wild program in tools directory for testing
627 wild-cards. Almost identical to the regex program.
628 kes Up port VSS single thread locking code.
629 kes Replace N_(..) by NT_(...) to inhibit translation of
631 kes Modify Makefile to change the permissions on Working Directory
632 to 770 if the directory is created.
633 kes Do not fail the Makefile if changing the permissions or
634 owner/group on WorkingDir fails.
635 kes Remove early selection of Scratch Volumes in the recycling
637 kes Correct the old recycling algorithm so that Scratch Volumes
638 are selected when looking for a Volume in the changer.
639 kes Correct a typo in the Verify SQL reported by Joe Park.
641 kes Remove automatic case folding on Windows FDs. You must
642 explictly use the 'Ignore Case = yes' option.
643 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
644 scratch volume in an Autochanger early in the 'recycling'
647 kes Make weof() and clrerror() methods of class DEVICE.
649 kes Tweak license to include Microsoft restrictions.
650 kes Move mysql.reconnect to after real_connect(). Thanks to
651 Frank Sweetser for the patch.
652 kes Disallow a backslash in a File = directive (Windows junk)
653 unless the string is quoted.
654 kes Apply Eric's patch to ua_label.c so that daemon protocol
656 kes Add NT_ definition for strings that should not be translated.
657 kes Apply NT_() to ua_label.c
658 kes Remove timed wait for VSS on Win2K3 as it is not yet
660 kes Correct bacula.in script to reference bacula-ctl-xx in the
661 sysconfig directory rather than the bin directory.
663 kes Fix a long standing bug in the bacula start/stop scripts.
664 kes Attempt to add the new bacula-ctl-* files to the rpm.
665 kes Switch to using typeof() for list traversing to avoid
666 as many FC5 g++ compiler warnings as possible.
668 kes Split the bacula start/start script into four files:
669 bacula -kes starts and stops calling other scripts
670 bacula-ctl-dir -kes starts/stops the director
671 bacula-ctl-fd -kes starts/stops the File daemon
672 bacula-ctl-sd -kes starts/stops the Storage daemon
674 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
675 kes Correct editing of JobId from int to int64 in fd_cmds.c
676 kes Eliminate FileSet name race with bash_spaces() and multiple
677 threads by bashing in a local.
678 kes Fix error return from 'use storage' to print a correct error
679 message rather than nothing.
680 kes Correct false re-read last block error message when two jobs
681 are simultaneously writing at the end of a tape.
682 kes Simplify exit conditions in the reserve.c code to avoid
683 possible non-release of reservation_lock().
684 kes Suffle lock order in reserve to avoid deadlock between
685 reservation lock and device mutex.
687 kes Initialize jcr mutex before first use. Thanks to Thorsten for
688 tracking this down for me !!!! as it broke the Win32 build.
690 kes Integrate addition of line count limitation to bsmtp -l from
691 Sebastian Stark <stark at tuebingen.mpg.de>
693 kes Implement regex test program in tools directory.
694 kes Attempt to fix time problem with bsmtp with foreign langs.
695 kes Add strip_trailing_newline() submitted by user.
696 kes Implement regex matching in migrate.c
698 kes Fix bug #537 to allow arbitrary time to mount a volume for
699 restore, if polling is turned on.
700 kes If dir_user or dir-group is specified in ./configure apply it to
701 the working-dir. Fixes bug #533.
702 kes If rescheduling a job cancel the previous incarnation with the SD.
703 Fixes bugs #566 and 557.
704 kes Fix bug #567 do_message() definition type conflict.
707 kes Add more jcr methods and make mutex and use_count private.
708 kes Create lock/unlock methods for jcr.
709 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
710 records to get to seek position.
711 kes Integrate patch from bug #561 to correct conio.c signal definitions.
712 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
713 terminates correctly by doing pthread_kill(). Do not destroy
714 SD cond wait variable between executions of the job. Use local
715 mutex for cond variable to avoid blocking jcr chain. Fix poor
716 use of jcr use count in jobq.c for restarted jobs.
717 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
718 lib/jcr.c -kes prevents locking the jcr chaing.
719 kes Apply patch from bug #564, which corrects listing volumes with
720 multiple autochangers. Apply same fix to next volume list.
721 kes Fix bug #562 where restore bootstrap file is not unique.
722 kes More details in implementing David's migration syntax proposal.
723 kes Save and restore dcr when swapping drives so that if we have
724 a write dcr it is not lost.
725 kes Use new routine lock_reservations() to lock the reservations
726 system, and call it while looking for a volume in askdir.c.
727 This could possibly fix bug #543.
728 kes Stop SD command loop if job is canceled.
731 kes Remove old code from findlib/create_file.c
732 kes Rename mac.c migrate.c
733 kes Add user friendly display of VolBytes in job report.
734 kes Rename target... to previous... to make it a bit easier to
736 kes Add selection type and selection pattern to Migration (idea
737 given by David Boyes).
740 kes The po files should now be current.
741 kes Fix new sql_use_result() code to properly release the
742 buffers in all cases.
743 kes Use the keyword ujobid to mean the unique job id; job or jobname
744 to mean the Job name given on the Name directive, and jobid to
745 be the numeric (non-unique) job id.
746 kes Allow listing by any of the above.
747 kes Add the user friendly job report code for reporting job elapsed time
748 and rates with suffexes from John Kodis <kodis at comcast.net>.
749 kes Add Priority and JobLevel as Python settable items.
750 kes Use TEMPORARY table creation where the table is created by
752 kes Add new code submitted by Eric for waiting on specific jobid.
753 kes Add ACL checking for the dot commands.
754 kes Fix restore of writable FIFOs.
755 kes Fix a bug in bpipe where the string was freed too early.
757 kes Modify the Python class examples to inherit object -kes new way
758 of defining classes. Patch from Felix Schwarz.
759 kes Implement jobuid to replace old usage of job in keywords as
760 suggested by Eric Bollengier.
761 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
762 wait (wait for all jobs to stop)
764 wait jobuid=unique id
766 kes Implement write variables for Python to set Priority (anytime), and
767 Job Level, only during JobInit event.
769 kes Fix the block listing bug pointed out by Arno.
770 kes Update the po files at Eric's request.
772 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
773 accept time qualifiers.
774 kes Make catalog respect ACL.
775 kes Add recycle count to Media record.
777 Changes to 1.39.6-beta1 24Feb04
779 kes Add Rudolf Cejka's new rc-chio-changer.
780 kes Implement pulling Volume from Scratch Pool if the
781 Volume is in the autochanger.
782 kes Implement additional command arguments for update Volume.
786 kes Back port changes to 1.38.5
787 kes Fix recycle SQL for StorageId.
788 kes Fix misplaced quote in mtx-changer script.
790 kes Note. Your database must be updated, or you must create
791 a new database. I have not yet incremented the database level.
792 kes Add Location table.
793 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
795 kes Implement create/get mac record in database for adding extended
796 Migration data to the job record.
797 kes Add new MAC table to update/make database scripts.
798 kes Return Storage name used when getting VolumeNames for a job.
799 kes Change bsr file keyword Storage to Device, which is more accurate.
800 kes Ensure that Mac records are pruned/purged.
801 kes Tweak SD tools to deal with changing media type.
802 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
803 kes Pass pointer to dcr pointer to acquire_device_for_read() so
804 that the subroutine can switch devices, and hence dcrs.
805 kes Modify the multiple MediaType read code to re-use the same
806 dcr when switching devices. This makes the code much more
808 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
809 from a table for restore.
810 kes Add Storage name to VolParams, but it really should be Device.
812 kes Add disk-changer to scripts directory + configure/Makefile
813 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
814 kes Implement store_bit scanner to replace store_yesno. Mostly done.
815 kes Implement new store_bool that stores in a bool.
816 kes Add true/false to yes/no conf directives.
817 kes Make first cut at changing appropriate store_yesno to store_bool.
818 kes Complete implementation of Pool storage devices.
819 kes Move starting clones to job.c
820 kes Move create_restore_bootstrap_file() to job.c
821 kes Make copy_storage() more general to be able to handle
823 kes Cleanup a lot of migration code for manual running, including
825 kes Move getting a scratch Volume into a subroutine.
826 kes Make all places a Volume that is added to a pool to
828 kes Fix bug in autochanger recycle code (improper edit 64 bit).
829 kes Fix segfault in restore command when no value specified.
830 kes Start adding code to handle multiple MediaTypes in restore.
831 kes Eliminate race condition in getting Volume name for
832 two drive autochanger.
833 kes More debug code in autochanger.
834 kes Add storage keyword to bootstrap file, add parsing.
835 kes Move slot in bsr file into Volume record as there will be
836 a different slot for each Volume.
839 kes Implement Pool storage overrides.
841 kes Implement first cut of Migration.
842 kes Implement mysql_use_result() from patch by Karl Hakimian.
843 This reduces significantly the memory consumption during
844 the restore tree building, and hence runs faster too.
845 kes Implement StorageId patch supplied by user (reggie) in bug
846 #536. This should permit Bacula to work correctly with two
848 kes Implement Job listing variations suggested by a user.
849 kes Move updating bootstrap code in backup.c to subroutine
850 update_bootstrap_file().
851 kes Add new job status elapsed time and bytes written user
852 friendly job report output patch sent by John Kodis
853 <kodis at comcast.ne>.
854 kes Implement a storage list in Pools.
855 kes Separate out setup_job() code from run_job().
856 kes Get migration working -kes lots of changes in mac.c in both
858 kes Apply patch from user (Eric Bollengier I think) that fixes a
859 DIR crash when no arguments are supplied to a dot command.
860 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
861 kes Fix command arg name->volume in label command of gnome-console.
862 kes Fix SD acquire.c to release correct DCR by explicitly testing
863 on the dcr address rather than trying to devine if it is a read
864 or write dcr. This failed in error conditions when the device was
868 kes Apply user supplied patch for more readable rate output
870 kes Continue implementing migration.
871 kes Implement support for removable filesystems in SD.
872 kes Ensure that btraceback scripts can be read by anyone.
873 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
874 kes Correct bug where canceling restore before the FD contacts
875 the SD causes the drive to be left in read mode.
876 kes Move ofline_or_rewind into DEVICE::close().
877 kes Eliminate close_device.
878 kes Convert several dev subroutines to methods (e.g. bsf,
880 kes Eliminate force_close_device().
881 kes Implement Device Type directive in Device resource that
882 can have values File, Tape, Fifo, DVD, or Prog.
883 kes Add has_cap() method to Device.
886 kes Add patch from bug #527 to allow RedHat user to specify
887 options/user/group for starting each daemon in
890 kes Add two new queries to query.sql provided by Arno. One
891 list volumes known to the Storage device, and the other
892 lists volumes possibly needing replacement (error, ...).
894 kes Add periodic (every 24 hours) garbage collection of memory
895 pool by releasing free buffers.
897 kes Correct bug counting sized (for display only) in smartall.c
898 kes Print FD mempool stats if debug > 0 rather than 5.
900 kes Make db_lock() mutex error fail the job rather than abort
901 Bacula. Canceling the job caused the mutex to fail.
902 kes Correct bug in alist.c that re-allocated the list if the
903 number of items goes to zero.
904 kes Move the reservation system thread locking to the top level
905 so that one job at a time tries all possible drives before
907 kes Implement a reservation 'fail' message queue that is built
908 and destroyed on each pass through the reservation system.
909 These messages are displayed in a 'Jobs waiting to reserve
910 a drive' list during a 'status storage='. Note, multiple
911 messages will generally print for each JobId because they
912 represent the different problems with either the same drive
913 or different drives. If this output proves too confusing
914 of voluminous, I will display it only when debug level 1
915 or greater is enabled in the SD.
917 kes Add enable/disable job=<job-name>. This command prevents
918 the specified job from being scheduled. Even when disabled,
919 the job can be manually started from the console.
920 kes During 'update slots' clear all InChanger flags where the
921 StorageId is zero (old Media records).
925 kes Fix autochanger code to strip leading spaces from returned
926 slots number. Remove bc from chio-changer.
927 kes Back port a bit of 1.39 crypto code to reduce diffs.
928 kes Fix first call to autochanger that missed close()ing the
929 drive. Put close() just before each run_program(). Fixes
932 kes Add PoolId to Job record when updating it at job start time.
934 kes Pull in more code from 1.39 so that there are fewer file
935 differences (the new ua_dotcmds.c, base64.h, crypto.h
936 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
937 util.c. Aside from ua_dotcmds.c these are mostly crypto
939 kes Implement new method of walking the jcr chain. The
940 incr/dec of the use_count is done within the walking
941 routines. This should prevent a jcr from being freed
942 from under the walk routines.
947 kes Start implementing Verify list output.
948 kes Move the suitable_drive flag to a better place to prevent
949 premature termination of the reservation if all drives
950 are busy -kes should fix Arno's diff/inc pool failures.
952 kes Add mutex to single thread VSS code in Win32.
954 kes Simplify code in askdir.c that waits for creating an appendable
955 volume so that it can handle multiple returns from the wait
957 kes Modify the wait code to permit multiple returns.
958 kes Return a zero when "autochanger drives" is called and
959 it is not an autochanger.
960 kes Make rewind_dev() a method taking a DCR as an argument.
961 This permits closing and reopening the drive if the
962 rewind fails as happens if the drive was loaded while the
963 file descriptor was open. This refreshes the file descriptor.
964 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
965 if the device is open or not. This should eliminate
967 kes Return error if reserve cannot find at least one suitable device.
968 kes Make wait_for_sysop() return correct state information.
969 kes Fix Win32 state file problem. write was not using compat
970 code. This should fix bug #500.
972 kes Modify gui on command to set only GUI mode and not batch.
973 kes Modify .messages command to always print messages regardless
975 kes If GUI mode is on, suppress automatic printing of
977 kes Delete old bnet packet code.
978 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
979 wx-console. -kes not implemented because bconsole must be updated.
980 kes Modify restore command in wx-console to set gui on and to use
981 only .messages instead of messages. Hopefully this fixes bug
983 kes Fix seg fault in exit of acquire when canceling a job --
984 reported by Wolfgang Denk
985 kes Pull in latest reservation system changes from 1.38
986 kes Make .messages command always print messages regardless
987 of the automessages flag.
989 kes Fix seg fault if user labels a drive directory bug #513
990 kes Remove quotes around Version as it breaks things.
992 kes Merge in Aleksandar Milivojevic's mods to the spec file.
993 kes Apply sparse code fix for raw drives and fifos. Bug 506
994 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
996 kes Correct reservation system to do a last ditch try
997 for any mounted volume, then anyone anywhere.
998 kes Add quotes around table Version because of
999 error in MySQL 4.1.15 -kes bug report submitted.
1000 kes Correct some minor problems with btape in the fill
1002 kes Updates to ssh-tunnel from Joshua Kugler.
1003 kes Added a report.pl program from Jonas Bjorklund.
1004 kes Simplify the O_NONBLOCK open() code for tape drives,
1005 and always open nonblocking.
1006 kes Do not wait for open() if EIO returned (shouldn't happen).
1007 kes Eliminate 3 argument to tape open().
1008 kes Correct the slot # edited in the 3995 Bad autochanger unload
1010 kes With -S on bscan (show progress) do not divide by zero.
1012 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1013 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1014 kes Remove unused code in wait_for_device.
1015 kes Make wait_for_device() always return after 60 seconds of wait.
1019 kes Add stubs for non-crypto build.
1021 kes Use localhost if no network configured
1023 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1024 kes Remove debug print.
1025 kes Add bail_out in error during state file reading.
1027 kes Merge changes made to 1.38.3 into HEAD
1028 kes Add stubs for pygtk-console code
1029 kes Create Makefile.in for pygtk-console code
1031 kes Merge updates into 1.38 branch
1032 kes Update specs to include mysql4 define.
1033 kes Fix when attributes are sent, must be after binit().
1034 kes Stop read_record() if status not ok in second loop.
1035 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1036 and partial records in read_record(). This allows bscan
1037 to get FileIndex at EOT correct.
1038 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1040 kes Fix Win32 built to work with new crypto code.
1041 kes Apply patch supplied by user (slightly modified) to fix
1042 correct detection of holes in block devices and FIFOs.
1044 kes Apply patch supplied by user (slightly modified)
1045 to fix SD hang with multiple pools and bad client
1046 IP. Fixes bug # 508.
1048 kes Add nagios plugin to the examples directory. Submitted by
1050 kes Remove warning message about multiple saves of hardlinked files
1051 from find_one.c as it can generate too many warning messages.
1052 kes Modify most restore error messages to be queued so that they
1053 appear at the end of the job rather than mixted with the restore
1054 listing where they could be "lost".
1056 kes Reset timeout values before select() per patch from
1057 Frank Sweetser for problems with non-blocking sockets.
1058 kes Unlink the state file if either reading or writing it gets
1059 errors. Hopefully this will fix Win32 exit problems.
1060 kes Add sanity check in append.c to ensure that dcr is not NULL.
1061 This can happen if multiple drive autochanger SCSI control
1062 channel and drive indicies do not correspond.
1064 kes Get next volume from Scratch pool before creating a volume.
1065 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1066 kes Remove argument from create_bacula_database for SQLite as it
1068 kes Add back index code so that two drive autochangers can get
1070 kes Change a bunch of debug levels to aid debugging autochangers.
1071 kes Fix reservation so that mutexes are properly applied.
1072 kes Rework reservation algorithm so that two drives can be used
1075 kes Landon merged his data encription changes into the HEAD
1076 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1077 If this patch is applied, the number of days can be specified with
1078 "list nextvol days=xx"
1080 "status dir days=xx"
1081 My use case is to be able to preview the next scheduled job (and the
1082 next tape to be used) on fridays if there are no scheduled jobs during
1086 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1087 kes Fix malformatted bnet error message that caused seg fault
1089 kes Applied user patch to improve README.vc8 in src/win32.
1091 kes Add Migrate, Copy, Archive Job types (some where there)
1092 kes Correct some more editing of JobId's (for 64 bit compatibility).
1093 kes Ensure that StorageId is stored in Media record when ever possible.
1094 kes Add Migration Job to Job.
1095 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1096 Next Pool to Pool resource.
1097 kes Add more code to mac.c (migration archive copy).
1098 kes Change Start Storage daemon job to require read and write storage
1100 kes Pass read storage data to SD as well as write storage data.
1101 kes Remove old code from winservice.cpp
1102 kes Break on error in scan.
1103 kes Fix typo in signal.c
1104 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1105 kes Cleanup how find_device() works.
1106 kes Add read output to Status in SD.
1109 kes Add red-black btree routines
1111 kes Remove abs() in bfile.c so that it compiles on Solaris.
1114 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1115 kes Fix bnet-server bug found on OpenBSD. Bug #486
1116 kes Fix cancel failure bug. Bug #481
1117 kes Fix failure when Pool name has spaces. Bug #487
1118 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1119 kes Fix a couple of free()s in src/filed/acl.c
1120 kes Fix memory overrun in bfile.c in building OS X resource
1121 fork filename. Bug #489
1122 kes Add Pool name to SD status output.
1124 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1125 kes Make sure to set storage before trying to set drive.
1126 kes Add bacula_mail_summary.sh to examples directory. It makes
1127 a single email summary of any number of jobs. Submitted
1129 kes Make sure when we do a mount to unblock the device even
1130 if the drive could not be opened.
1132 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1133 and correct a few minor problems to make it build on Linux.
1135 kes Remove delete of CVS from all Makefiles
1136 kes Fix seg fault when clicking on Add button in wx-console
1137 restore panel. Bug #470.
1138 kes Fix copyright date and URL typo -kes bug #468.
1139 kes Change autostart install for FreeBSD to look for rc.conf
1140 rather than rc.local as suggested fix for bug #466.
1141 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1142 grant on status. Bug #465
1143 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1144 update script. Bug #464
1145 kes Tweak #ifdefing a bit in new Win32 stream code.
1146 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1147 kes Add documentation of performance #defines
projects / bacula / bacula / blob