1 Technical notes on version 2.2
5 kes Eliminate ./configure warning on po directory
6 kes Fix bug #1063, reuse of freed ptr in list nextvol.
7 kes Release regex compile buffer in filed/job.c
8 kes Add proper type of const char in sql_create.c
9 kes Turn off debug in daemon termination routines
10 kes Move free_volume_list() before devices are freed in stored.c
11 kes Fix reference to uninitalized stack variables in bregex.c.
12 This should correct bug #1067.
14 kes Fix possible seg fault in SD when freeing a volume entry.
16 kes Apply patch from bug #1069 that corrects spurious error messages
17 when ACLs enabled on SGI but no ACL exists.
18 ebl Fix a storage deamon segfault at debug level 500.
20 Beta Release Version 2.2.9-b4
22 kes Re-enable code to remember last volume mounted on a non-tape
24 kes Add patch supplied in bug #1068 that fixes a SD crash when using
25 a Virtual autochanger.
26 kes Generate correct JobMedia records during spooling/despooling when
27 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
28 <tih@hamartun.priv.no> for excellent analysis and testing.
30 Beta release Version 2.2.9-b3
32 kes Rework certain SD locking based on gdb tracebacks of deadlocks
33 sent by Eric. This code now uses only the volume_lock() rather
34 than the reservations lock when at EOM and acquiring a new
36 kes Ensure only one exit point in several subroutines.
38 Beta release version 2.2.9-b2
40 kes Fix to initial tape drive open to release the volume name
42 Beta release Version 2.2.9-b1
44 kes Fix to JobMedia fix.
45 kes Fix bug pointed out by Peter Much that causes the StorageId to
46 be updated when reading a tape (during migration, it could have
47 been incorrectly set to the write StorageId).
49 kes Implement autostart scripts for Debian
51 kes Fix mtx-changer.in for broken Debian mt program.
53 kes Massive commit of all fixes and back ports to create 2.2.9
55 kes Apply doc fix from bug #1062.
56 kes Resolve crash and improper restore wx-console Win32 restore
58 kes Update Win32 wxWidgets to latest version.
59 kes Attempt to do correct handling of Win32 mount points. Should
61 kes Fix Win32 FD backup/restore memory leak due to improper termination
62 of BackupRead/Write. This fixes bug# 1038.
63 kes Add const to AIX prototype for initgroups()
65 kes Undo bug #1047 heap overrun fix as it is not correct.
67 kes Fix creating first JobMedia record during Migration to include
68 proper index. This caused slow restores of migrated jobs.
70 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
71 and do not strip paths on symbolic links.
72 kes Set catalog backup database and user name from values specified on
74 ebl Apply patch to correct bug #1031, about wrong pool source information
79 kes Apply patch from Martin to correct bug #1040, bscan sets existing
81 kes Fixed important spelling error in doc -- bug #1045.
83 kes Move initialization of read/write res lock earlier in the code.
84 This fixes the crash with a null conf file. This fixes bug
86 kes Redefine CURES in lib/parse_conf to be URES and move it all
87 into lib/parse_conf.c -- this responds to bug #1042, but does
88 not fix it. The fix is not to compile with FORTIFY_SOURCE.
89 kes Backport fix de-referencing a NULL pointer in the scanner from
90 the trunk SVN. I don't think this was reported as a bug.
92 Beta release Version 2.2.8
94 kes Re-enable the new job code editing (%f).
96 kes Fix bsnprintf for float point numbers. I broke recently when
97 parameterizing some variables. This fixes bug #1036.
99 kes Move Heartbeat documentation from Job to Director resource.
100 This fixes bug #1033.
102 kes Fix existing switch drive SD code to call autochanger to release
103 any old volume. This must be done to keep the autochanger from
104 releasing subsequently newly reserved volumes in doing a close().
105 This should possibly fix bugs #1032 and #1018.
106 kes Apply big backport of current SVN SD code that corrects a number
107 of race conditions. This is a first step in fixing bug #1018.
109 ebl Fixes bug #1028 where "Selection Type" option was not usable
113 Release Version 2.2.7
115 kes Partial back out (disabled) %f job code editing because it
116 does not build on Win32.
117 kes Fix seg fault Frank Sweetser reports in regression testing
118 on his systems. The problem was that the original author of
119 bsnprintf.c did not take into account the side effects of
120 using ++x in the argument to a #define.
122 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
123 that implements double quoting include names in conf files,
124 and also allows piping input by having the first character
125 be a vertical bar (|).
126 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
127 that implement %f in RunScripts to pass the FileSet name.
128 kes Skip leading | when lex input comes from a pipe as suggested
129 by Michael Stapelberg <michael@stapelberg.de>.
131 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
132 Nerijus Baliunas <nerijus@users.sourceforge.net>
134 kes This patch corrects a problem where the maximum concurrent storage
135 jobs counter gets out of sync during restore jobs causing jobs to
136 'wait on max Storage jobs'. This patch fixes bug #1009.
138 kes Add new include to postgresql.c suggested by Marc Cousins so
139 that it compiles correctly with pgre version 8.3. Also fix
140 misuse of %x with pointer (should be %p).
142 kes This patch fixes bcopy so that it produces correct Volumes.
144 kes This patch eliminates spurious output to the console during a VerifyVolume
145 job that contains encrypted data. It fixes bug #1024.
147 kes This patch prevents the 'status dir' command from trying to use a scratch
148 volume and possibly moving it from one pool to another. This patch fixes
151 kes Fix --archivedir addition to configure. Replace it with
152 --with-archivedir in configure.in This fixes the regression
154 kes This patch fixes bug #1012 where the job is canceled because
155 of Max Run Time exceeded when the job has not yet started.
157 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
158 one 'part' to write. Instead of each part being stored on disk,
159 written to DVD, then deleted from disk, all parts are written to disk,
160 and only the last is written and deleted from disk.
162 kes Correct typos in disk-changer.in
164 kes This patch fixes the status command to include the formating string for
165 JS_AttrInserting. It fixes bug #1021.
166 kes This patch should fix the Mac OS X build problem on the latest
167 Darwin, where sys/types.h was not included correctly (apparently
168 due to a change in the Mac headers). The solution was to explicitly
169 ensure that it is defined for the ./configure.
170 This patch also has a rebuild of configure that includes the Debian
171 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
172 kes This patch should ensure that queued messages to the console are
173 displayed as soon as possible. It should fix bug #1007, but has been
174 reported not to work.
176 kes This patch fixes the infinite loop when trying to increase the
177 maximum number of volumes in a Pool during the add command.
178 This patch fixes bug #1008.
180 Release Version 2.2.6
182 kes Get fix for joblist bug in bat from trunk.
184 kes This patch fixes bug #1003 where putting the message output from
185 a Verify job into the catalog results in a recursive loop. The problem
186 seems to show up only with postgresql (to be verified).
188 kes Fix bug #942 where lots of emails where generated when the heartbeat
189 interval was low and Bacula wanted a different tape from the one in
192 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
193 which was updated during a restore (or a reading migration) bug #982
195 ebl Use qmake-qt4 instead of qmake when available (debian system).
197 kes Add a security warning to src/cats/make_catalog_backup.in indicating
198 that passing the password via the command line (arg 3) is insecure.
199 This responds to bug #990 (it doesn't fix it).
200 kes Apply 2.2.5-postgresql-errors.patch
201 kes Remove unneeded File table index on JobId, which is already
202 present as the first index of another multi-index.
204 kes Set default debug_level to zero. This corrects bugs #991 and #993.
205 kes Fix a crash in bat when it cannot connect to the Director for example
206 if the Director is not running.
208 kes Activate Close button on tray-monitor window. This fixes
211 kes Fix spurious warning message printed when creating a volume with
212 a LabelFormat. This fixes bug #976.
214 Release Version 2.2.5
216 kes Add JobId in place of Job name in all the Jmsg() output.
217 kes Correct the APP_DESC for the Win32 storage service (remove an e).
219 kes Add new SD despooling attributes and Dir inserting attributes
220 job status codes. This fixes bug #961.
221 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
223 kes Fix doc issue. This fixes bug #963.
224 kes Fix listing performance problems in bat. Pointed out by
226 ebl Fix replace on restore. This fixes bug #969
227 kes Fix bat code that tests for Win32. This should fix bug #968
228 kes Query 5 list wrong Vol after migration. This fixes bug #960
230 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
231 in back porting from 2.3.x
233 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
234 The details are included in the notes in this file.
236 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
237 messages; it fixes a problem opening the SQLite3 database when multiple
238 simultaneous jobs were running; it fixes a bug with certain versions of
239 MySQL where batch inserts failed because of table name character case
240 (upper/lower) differences.
241 kes Fix race condition that drops final block written to volume.
242 This happens in rare cases with multiple simultaneous jobs
243 when the Volume fills. This fixes bug #964. May be related
244 to bug #935 and possibly #903.
246 kes Fix FD->SD authorization failure, which was due to spurious
247 wakeups from a pthread_cond_timedwait(). Simply check the
248 predicate before continuing. This fixes bug #953
249 dvl Add new configuration item --archivedir
250 dvl Adjust regression tests to use tmp not /tmp. This will allow
251 multiple concurrent runs of the regression tests.
253 kes Eliminate more strerror() and replace with bstrerror().
254 kes Remove BSD getopt and replace with unrestricted IBM version.
255 kes Fix Win32 build for changed calling sequences.
257 kes Fix FD->SD authorization failure, which was due to spurious
258 wakeups from a pthread_cond_timedwait(). Simply check the
259 predicate before continuing. This fixes bug #953.
260 kes Add const char where needed (more to do).
262 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
263 kes Don't overwrite error message in check_tables_version.
265 kes Unlock batch insert tables with same calls used elsewhere.
266 kes Allow starting 59 jobs a second.
267 kes Make SD session key more random.
268 kes Add retry for SQLite opening db if it fails. Probably helps
270 kes Suppress extra error messages during batch insert failure.
272 kes Put some FD auth code on dbglvl rather than fixed.
273 kes Return insert attributes error message in db msg buffer to avoid
274 false error messages. Helps fix bug #966.
275 kes Separate batch init error messages. Probably helps fix bug #966.
276 kes If Dir gets an error during inserting attributes, cancel SD.
277 This reduces unnecessary error messages.
279 ebl Cleanup batch insert code. Probably fixes bug #965.
281 kes Turn off some code when batch insert not enabled.
282 kes Edit FD name in connect error messages.
284 kes Add code to handle tray monitor separated from Win32 FD.
285 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
287 kes Fix ANSI tape labeling. This fixes bug #954.
288 kes Increase the max block size to 4MB fixes bug #957.
289 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
290 is not properly mounted (recognized) during a poll.
291 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
292 Job that has differences reports Verify OK.
293 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
295 Release Version 2.2.4
297 kes Increase size of name string when FD making connection to SD.
300 kes Add waits to multiple exit detection code to try to force pid
301 file to always be deleted.
302 kes Restore good dev.tar.gz to rescue set appropriate binary property.
304 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
305 trying to switch drives by checking for blocking before unblocking.
307 kes Cancel storage daemon in all cases where FD reports error. This
308 should fix virtually all cases of bug #920.
310 kes Fix error message that was clobbered when Dir tells SD it does not
311 have write permission on Volume. This should fix a minor point
312 in bug #942, but not the main problem.
313 kes Add code to cancel job in SD if FD connection fails. This should
315 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
316 kes Fix migration code to get correct Volume name with multiple volumes
317 by skipping |. Fixes bug #936.
318 kes Implement patch supplied by Landon to fix bug #944 where using
319 TLS with bconsole uses 99+% of the CPU.
320 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
322 kes Move patches into patches directory.
324 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
327 ebl Using 'm' in bconsole will show messages like before,
328 and not memory usage.
330 Release Version 2.2.3
331 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
334 kes Fix bug #935, and probably also bug #903 where files were not
335 restored. MediaId was not properly set in JobMedia record after
338 kes Add ./configure search in qwt-qt4 for qwt package
339 kes Apply Martin Simmons patch that should turn off the new API usage
340 when batch insert is turned off allowing building on older
343 Release Version 2.2.2
345 ebl Detect if new PosgreSQL batch insert API is present.
346 kes Correct incorrect mempool call causing Director crash.
347 sb Update spec files for 2.2.1 release
349 Release Version 2.2.1
351 kes Update POTFILES.in
352 kes Cleanup a few underquoted AC_DEFUNs in configure
353 kes Apply patch from Martin Simmons that adds a test for va_copy to
356 kes Fix bug #921 by increasing the number of tries to create a new volume
358 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
359 can be called multiple times. Implement a version for machines
360 without va_copy() that gets a big buffer.
362 kes Integrate more portable zone offset code into bsmtp.c
363 Submitted by Attila Fülöp.
365 kes Fix bad SD->FD return status reported by
366 (James Harper) <james.harper@bendigoit.com.au>
367 ebl Fix a bug in read_close_session which return random status
368 thanks to James Harper
370 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
371 and directory names during restore of single file/directories.
372 kes Add sanity checks to .sql command when string is empty. Hopefully
373 that will resolve Dirks Director crash.
375 kes Apply patch submitted by Martin Simmons that corrects a seg fault
376 in the bsmtp chat subroutine when debug is >= 10.
378 kes Fix Director crash when running bat SQL queries.
379 kes Add David's notes on Item 8: Copy pools.
381 kes Rework projects file to be current and ready for a vote.
382 kes Enhance lex scanner error message.
384 kes Tweak LICENSE file to mention BSD code.
385 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
386 if specified on the ./configure.
387 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
388 This class is intended to allow us to open a second bsock to the
389 Director while in the restore subdialog.
391 kes Fix configure to create bat Makefile before creating dependencies.
392 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
393 kes Add a tooltip to the tray monitor.
394 dvl Set the Director's PID file before dropping privs. This fixes
397 kes Update AUTHORs file
398 kes Increase the default max concurrent jobs to 20 in FD and SD to
399 correspond with the default .conf files.
400 kes Rewrite the Win32 service routines. This eliminates the 3 copies
401 some different, of the same file created by RN when porting the
403 kes Rearrange some of the Win32 directories and the placement of the files
405 kes Set DEVELOPER flag in version.h
407 ========================================================================
408 Release Version 2.2.0
410 kes Apply a second doc patch from Marc.
411 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
412 improves the tips section that discusses how to setup multiple
415 kes Update bat README file.
416 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
417 corrects a typo in the Recycle status check in db_find_next_volume().
418 This will probably fix a number of annoying problems with multiple
420 kes Modify most of dird/msgchan.c to use bsock class calls rather than
421 bnet calls -- no functionality change.
423 kes Modify the Verify output to specify if files are missing on
424 the Volume(s) or disk. Fixes confusion in bug #916.
425 kes When more than one Volume is read in a migration job, the last
426 Volume bytes reported are from the last read volume rather than
427 the last written volume. Fixed. This fixes bug #910.
428 kes Fix display of Recycle flag after update volume=foo recycle=yes.
429 It previously printed New Recyle flag is: no. This fixes bug
432 kes Correct seg fault when switching tape drives during restore.
433 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
434 be used until after 2.2.0 release.
436 kes Remove fnmatch() in SD that permitted wild card specifications.
439 kes Fix %g in filename returned by SQL for browse tree reported by
441 kes Fix configure so that it puts config.out in the cwd rather than
443 kes Attempt to fix the locking problem reported by Eric in bug #906.
444 kes Make berrno class to leave errno unchanged after constructor call.
445 kes Make bnet_server use the heap rather than the stack to allocate
446 its socket fd pointers to avoid a crash at termination. Problem
447 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
449 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
450 and putting it in depkgs-qt along with Qt4.3.
452 kes Rework code in acquire.c that switches drives for reading when
453 the Media Type does not match. This should fix bug #906
455 ebl Fix a director segfault during job setup #907
456 kes Correct seg fault in postgresql when first operation returns no
457 rows. Fixes Dirks File browser problem seg fault with bat.
459 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
460 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
463 kes Implement PopUp YES/NO dialog for bat.
465 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
467 kes Correct RunScript to terminate job in FD on failure.
468 kes Change abort_on_error and AbortJobOnError to fail_on_error
469 and FailJobOnError in RunScripts.
470 kes Minor tweaks of code formating in RunScripts, principally to
471 avoid depassing 80 columns.
473 kes Eliminate one #ifdef Win32 in bsmtp
474 kes Implement grow tool to grow a file for testing very large databases.
475 kes Add big-vol-test to test Bacula seeking with > 5GB.
478 kes Modify find_next_volume() to return all values in Media record.
479 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
483 kes Update Release notes
485 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
486 Warning, in previous beta version, all media get from scratch keep their
489 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
490 This should fix bug #842. Made a note to look at removing the temp
491 files at the end of the install.
492 kes Add ability to mount and unmount a file device providing it is
493 marked as being removable and has the appropriate mount and unmount
494 commands defined in the Device resource. This fixes bug #830.
495 kes When applying a storage override, release all previous storage
496 definitions rather than just prepending the new storage.
497 This should prevent a good deal of confusion.
499 kes Implement ./configure search for qwt libraries.
501 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
502 Win32 FD. This should fix bug #893.
503 kes Remove an unnecessary beep in Win32 init code.
504 kes Update copyright dates in Win32 executable about boxes.
505 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
506 code with a BSD getopt.c and getopt.h.
507 kes Remove sched.h from the Win32 compat directory -- not used.
508 kes Remove the Exit menu item from the Win32 tray monitor. If you really
509 need to shut it down, do it through the services panel or the command
511 kes Remove some inappropriate Bacula FSFE copyrights.
512 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
513 kes Fix regress config non-portable test as pointed out by
514 Florian Heigl <florian.heigl@gmail.com>
515 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
516 as pointed out by Florian Heigl <florian.heigl@gmail.com>
518 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
519 Reported by Frank Sweetser.
523 kes Fix client-only build.
524 kes Integrate client-only fixes for bsys (initgroups) and conio from
525 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
526 kes Make arguments to get_scratch_volume() in same order as other
528 kes Rework the prune_volumes() subroutine so that after purging and
529 no volume found in desired pool, it will check for a scratch
530 volume. This prevents recycling the whole scratch pool.
531 kes Add code to status storage to print boffset_t (largefile support).
533 kes Move qwt (Graphics libarary for Qt4) to depkgs.
534 kes You now need a --with-qwt=<dir> to be able to build bat.
535 kes Update src/win32/cats/bacula_cats.def to include the new
536 db_get_query_dbids() call on Win32.
538 kes Correct a problem when selecting a scratch volume and moving
539 it to another pool that lost some columns.
540 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
541 kes Enhance Autochanger error messages to include Volume and device name.
542 kes Rework prune_volumes() code to take account of InChanger flag,
543 and to handle recycling volumes going to the Scratch pool and
544 current pool because the RecyclePool directive.
545 kes Implement a better and more efficient db_get_query_dbids() to
546 handle creating and passing back a list of DBIds.
550 kes Start work on new more efficient DBId subroutine. First use
551 will be for recycling volume to Scratch inchanger.
552 kes Increase number of JobIds in pruning from 1000 to 10000.
553 This to be replaced by above routine.
554 kes Begin implementation of building Qt4 on Win32.
555 kes Correct typo in fix I added for bad TLS shutdown.
556 kes Pull 2.0.3 patches into patches directory.
557 kes Update Release notes. Include qt-console in line count.
558 kes Update Projects file.
560 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
561 bug in migration code where a job that spanned two volumes
564 kes Implement new BST_DESPOOLING blocked state. Change from locking
565 during despooling in SD to blocking. This means that other threads
566 can work with the device structure, in particular the reservations
567 system while despooling.
569 kes Fix return in reservation message queue that missed clearing
570 the jcr lock (implemented 26Jun07 below).
571 kes Rename a number of dev methods to make locking function names
573 kes Document locking in lock.c. Move lock structures to new file
576 kes Move reservations message lock to lock jcr only this
578 kes Move main SD locking code into lock.c (new file).
579 kes Update Win32 build to include lock.c
583 kes Dirk committed the qwt library code for drawing graphs in bat.
584 kes Tweak install of qwt so that it is integrated with ./configure.
586 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
587 out by Eric (my typo).
588 ebl Fix configure.in to get batch mode enable
589 kes Return correct string from authenticate.cpp in bat when connecting
591 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
592 spurious line drops when using TLS.
593 kes Do not file reparse points when restoring a file that already
596 kes Implement Windows reparse points -- similar to directories, but
597 we do not descend into it. This is a first cut. They seem to
598 be backed up, but restore is not yet tested.
599 kes Remove restore_blocking in tls code when shutting a socket to leave
600 it in blocking mode. Hopefully this will fix the encryption bug
601 reported by Frank Sweetser.
602 kes When opening a file for backup, tell the OS that we are going to
603 read it sequentially -- optimization.
604 kes Change variable names in authenticate_director() to not conflict
605 with member names in bat. Caused great confusion with compiler,
608 kes Queue openssl error messages in case of comm problem.
609 kes Do shutdown() call if socket terminated.
610 kes Remove some duplicated code in tls.c
611 kes Move more of the bsock member variables into private and access
613 kes Add Frank Sweetser's tls-test to the regression suite.
615 kes Add Swedish sv.po file
617 kes Don't print clock skew message in FD if less than 3 seconds diff.
618 kes Add a bit of VSS info to status client.
619 kes Implement a first cut of Vista VSS, using Win2003 code.
623 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
624 loaded tape but uses first drive).
625 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
626 This was indeed a Win32 issue.
628 kes Simplify search of autochanger for in-use Volume.
629 kes Fix exit condition of check for in-use volume. kes Remove
630 inappropriate my_postgresql_free_result() in db_close()
632 kes Fix bad return in FD when encryption signature not found.
633 Probably caused a crash.
634 kes Inhibit missing encryption signature error messages for
635 file types where no signature computed.
636 kes Correct inverted check on autochanger in reservation system.
637 kes Tweak debug code in autochanger reservation.
639 kes Add some additional locking in the cats directory in subroutines
640 that modify packet variables called from batch insert.
641 kes Rework how dcrs are allocated. new_dcr() can now be called
642 with an existing pointer, and it will simply clean it up.
643 This allows the reservation system to test various different
644 devices, and will permit easy device changes.
645 kes A bunch of changes all over to handle new new_dcr() calling
647 kes Work more on the Volume management in the SD. Remember Volumes
648 for tape drives and for autochangers (even virtual disk changers).
649 kes When looking at the Volume list to reserve a drive, handle
650 autochanger names correctly by interating through the changer
651 devices. Also call the Director to see if a Volume is suitable
653 kes Fix some bugs in bscan. Make sure all media records are written.
654 Make sure that valid JobMedia records are written for disk files.
655 Previously they were completely wrong.
656 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
657 that the URLs don't change and so that the developers will all
658 work off the same copy. Rebuild from scrach.
659 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
663 kes Fix seg fault in FD from incorrect digest size.
664 kes Fix argument to non-OpenSSL crypto.c subroutine.
668 kes Remove a few malloc()s from the encryption code.
669 kes Use the class calls to bsock in filed/backup.c and restore.c in
670 place of the old bnet_xxx code.
671 kes Implement code that does an on the fly calculation of the
672 signing digest during restore of encrypted files. It makes
673 a best guess at the algorithm, and if it is not correct, will
674 then revert to the old code which reads the file after it is
676 kes Implement at least one missing crypto stream in stream_to_ascii()
677 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
678 #877 where a reload with bad syntax causes Dir to exit.
680 Cut: 2.1.14 beta (not released)
682 kes Do not free a volume on a tape drive until another volume is
683 mounted and read, or the autochanger unloads the volume.
684 This should help the SD re-use volumes that are already mounted,
685 and should fix bug #886.
686 kes Apply patch from user brettedgar that allows gnome2-console include
687 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
688 kes Apply patch from Lucien Weller that fixes day of week calculation
689 because of DST flag problem. Fixes bug #887.
691 kes Move find_next_appendable_volume() to after acquiring a valid device
692 in reserve.c. This fixes bug #864 -- confirmed by reporter.
694 kes Unable to reproduce bug 872. However added additional testing for
696 kes Bug #874 resolved by documenting SQLite limitations.
697 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
698 kes Bug #881 resolved by removing typo in mtx-changer script.
699 kes Made Frank Sweetser's wiki the official Bacula wiki with his
700 approval. Added a link to the wiki on the web page, and implemented
701 a backup from http://paramount.ind.wpi.edu
703 kes Fix update allfrompool to pass pool name.
705 kes Convert to pure GPL v2 license.
706 kes Fix sscanf problems reported by Peter Buschman that caused
707 a bus error on Solaris.
708 kes Rework (simplify) the select prompt in bat.
709 kes Move get_jobid_from_tid() into lib and create a
711 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
712 should definitely fix the problem of lost error messages in the
714 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
715 kes Eliminate tcpd.h from the project. Enclose the #include from the
716 library with extern C ...
717 kes Add print of signal name when a signal is trapped.
721 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
723 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
724 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
725 makes SQLit3 run 30 times faster, though a bit less safe.
726 kes Implement --with-batch-insert in configure and detection of thread
727 safe libraries. It is on by default, but turned off if no thread
728 safe library (e.g. SQLite 2) is available.
730 kes Fix Bacula PostgreSQL buffer overruns.
731 kes Do better checking for NULL results returned from PostgreSQL;
732 implement retry for failed queries; clear results buffer after
733 failed query. Hopefully this will correct the PostgreSQL failures.
735 kes Implement algorithm to handle only one appendable volume with
736 Prefer Mounted Volumes = no.
737 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
738 returned from a query.
739 kes Make volume lock recursive.
740 kes Implement an additional volume reservation algorithm that
741 starts by considering all reserved volumes then uses the
742 old brute force algorithm of searching the resources to
743 find a suitable device.
744 kes Add new reservations debug code and refine the old code.
745 kes Update the win32/dll/bacula.defs file.
747 kes Tweak reservations algorithm to permit a few more cases, i.e.
748 volume reserved, but on different drive, ...
749 kes Enhance SD status to include Pool and Media Type for drive in a
750 more readable format (a bit longer).
751 kes Fix PostgreSQL double free.
753 kes Minor refactoring of restore decryption code.
754 kes Add code to smartall.c to detect double free of a buffer.
756 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
757 so that bsmtp will create a correct email address (mailbox only).
758 kes Modify 'memory' command so that the buffers are listed as 'In use'
759 to avoid confusion with Orphaned buffers.
760 kes I reworked the OpenSSL include/lib flags to be handled in
761 the standard Bacula way, which should fix bug #863 concerning
762 non-standard OpenSSL libraries.
764 kes Implement Help Browser window for bat.
765 kes Fix reload bug that reset StorageId to zero.
767 kes Fix TLS #ifdefing when TLS turned off.
768 kes Ensure that when labelling a tape with Slot=0 that InChanger
770 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
772 kes Add StartTime to final uar_sel_jobid_temp query so that we can
773 add DISTINCT (required by PostgreSQL).
774 kes Implement BSOCK authenticate_director() method. Eventually will
775 authenicate all daemons.
776 kes Move several more functions into the BSOCK class.
778 kes Add code to tell the OS that we no longer need a cached
779 file that we were reading. In findlib/bfile.c. Also,
780 only cache files that we are reading. Thanks to
781 Tobias Oetiker <tobi@oetiker.ch> for the idea.
782 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
783 kes Implement script to automatically generate cats and dll .def
785 kes Update README.mingw32 to include new .def file generation.
786 kes Correct typo in UTF-8 error message as reported by:
787 jhernandez <julianhernandez@gmail.com>
788 kes Add additional sm_check() code on debug level 1.
789 kes Set default debug level to 1.
790 kes Trap SIGABRT in attempt to get traceback.
792 kes Reduce bat connect timeout from 30 to 15 seconds.
793 kes More restructuring and implementing BSOCK class in place of
795 kes Remove a few unnecessary malloc() tests in crypto code.
796 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
797 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
798 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
800 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
802 kes Fix Verify InitCatalog. The attributes were not pointing to the
803 correct saved location.
804 kes Implement message callback so that GUI is sure to get all
805 daemon messages. Currently displayed in a dialog in bat.
806 kes Ignore SIGUSR2 (Bacula timer) in bat.
807 kes Apply regress patch from bug #859 to allow regress to work
808 with Solaris compiler.
810 kes Begin adding TLS support to bat.
811 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
812 clean up lex.c and make it more readable.
814 kes Move more bnet functions into the BSOCK class.
815 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
816 kes Complete change of berrno strerror() method to bstrerror()
820 kes Cleanup incorrect email addresses in bsmtp.
821 kes Make bat display initial messages rather than discard them.
823 kes First cut of adding .mod to the run command.
824 kes Implement auto display of messages in bat.
825 kes Enhanced preferences to allow all Bacula output to be
828 kes Try to make bsmtp date routines more generic.
829 kes Fixed bug #856 autochanger documentation.
830 kes Rework bsmtp date editing for Win32. This fixes bug #854.
831 kes Add new cats entry point so Win32 builds.
833 kes Attempt to fix bsmtp date editing on OSes without %z editing.
835 kes Do better checking for the MySQL 64 bit libraries looking for both
836 .a and .so libraries.
837 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
838 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
839 kes Require the thread safe version of MySQL during configure. Thanks
840 to Andre Noll for pointing this out.
841 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
842 continuing in migration code.
843 kes Apply implementation of tray-monitor font derived from gnome-console
844 submitted by Andreas Piesk <a.piesk@gmx.net>
846 kes Eliminate important memory loss in SQLite
847 kes Fixed the batch insert MySQL thread specific data that was not
848 being freed. See cats/mysql.c:db_thread_cleanup().
849 kes Fix restore before command.
850 kes Convert old hdr.name to name() in a few places.
851 kes Implement update jobid command.
852 kes Return all time_t dates in db_get_job_record()
853 kes Stop watchdog in SD earlier.
854 kes Put Pool just after Storage in please mount message.
855 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
858 kes Update the po files.
859 kes Fix Verify InitCatalog by making it cache attributes.
861 kes Change name bacula-bat to bat for man 1 page to correspond to
863 kes Check for client and store NULL pointers in status command. This
865 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
866 kes Fix sign extended editing of %p.
867 kes Clean out a little old #ifdefing in cats/mysql.c
869 kes If time diff between DIR and FD is more than 600 seconds convert
870 INFO message to WARNING.
871 kes Implement heap size display in status for all daemons.
872 kes Attempt to fix MySQL db open memory loss (not successfull).
873 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
874 kes Eliminate memory loss in MySQL (possibly other SQLs) during
875 Query. This looks like a MySQL but but by doing extra releases,
876 the memory goes away. This should fix bug #847.
878 kes When backup fails, cancel SD before waiting for sd termination.
879 kes If SD is waiting for FD to connect during cancel, wake up the
881 kes Fix fsf code so that errno is correctly reported.
882 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
884 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
885 so that Bacula doesn't later stumble into a seg fault.
886 kes Use the term Restore Client in the restore Job report.
887 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
888 the original job's FileSetId.
889 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
890 spooling in migration jobs. Not yet tested.
891 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
892 reading conf file from a pipe. However, do it with open_bpipe()
893 rather than popen. Not yet tested.
895 kes Fix an ugly bug where the VolCatBytes were getting updated
897 kes Implement bconsole memory command that prints current memory
898 usage, plus smartalloc dump.
899 kes Clarify some error messages in backup, admin, and migrate.
900 kes Shrink label dialog to smaller size.
901 kes Invert Cancel OK buttons on restore to be OK Cancel.
902 kes More strerror() to bstrerror() conversions.
904 kes Start implementing bstrerror() in place of strerror().
905 kes Stripping path -- seems to work.
907 kes Prevent door and port files from being restored (mostly
909 kes Free an unreleased buffer in compat code.
910 kes Change console Job name from *Console* to -Console- to eliminate
911 Win32 filename problems. Put Win32 path separator when creating
912 Console file. This fixes bug #846.
913 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
915 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
917 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
918 to force Win32 error message.
920 kes First cut strip path. The data should be passed to the FD,
921 but nothing is done with it yet.
922 kes Enhance the digest and signature routines in the crypto
923 library to accept a JCR and to use it to print error messages
924 so that they will go in the Job report rather than the daemon's
926 kes Simplify some of the verify signature code.
927 kes Simplify a few of the alternative returns in the signature
930 ebl Use only POSIX regex instead of GNU regex in breg.c for
931 File relocation. It fix broken freebsd compilation.
932 kes Convert all other Dir files to use new ua class message
934 kes Tentative fix for missing digest signature in bug 807.
935 kes Correct handle problem in new win32_ftruncate routine.
936 kes Convert ua_purge.c and ua_update.c to use new ua class
937 message routines for bat.
939 kes Correct incorrect installation of LICENSE in Win32 installer.
940 kes Display LICENSE at the beginning of the Win32 install.
941 kes Attempt to correct the need for the png files to be installed
943 kes Reapply my bat.conf install script in qt-console. I think I
944 editted bat.pro instead of bat.pro.in and it was lost.
945 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
946 the /var/lock/subsys for subsysdir. Also corrects typos in the
949 kes First cut update job.
950 kes Correct configure to include qmake of src/qt-console directory.
952 kes Make restore job yes/mod/no print in one command so GUI works.
953 kes First cut implementing backup and restore client.
954 kes Correct editing in Verify output that caused a seg fault.
956 kes Insure that bat.conf is not overwritten during installation.
957 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
958 while I was implementing migration in March 2006 !
960 ebl Cleanup file relocation, using char *RegexWhere instead of
961 char *where + bool where_use_regexp
962 kes Update some manpages and add bat manpage.
963 kes Make a first cut at converting bacula.spec.in for bwx-console
965 kes Apply patch from John Goerzen to add hostname as fourth argument
966 to make_catalog_backup script.
967 kes Fix typos I introduced into bsmtp.c
968 kes Make pm_strxxx() routines handle input of NULL pointer. This
969 is to protect from NULL pointers returned from SQL databases.
970 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
971 kes Add more debug to FIFO code -- fix fifo regression test.
973 kes Implement posix_fadvise in FD, and for reading spool files in SD.
974 kes Add thread timer to bnet_connect() to break from OS if wait time
977 kes Update Win32 build to include new files, new symbols, and
979 kes Implement socket level heartbeat (tcp_keepidle)
980 ebl Commit File relocation patch
981 kes Make bat have 'make install' target.
982 kes Warn during install if old gnome-console binary found.
983 kes Warn during install if old wx-console binary found.
984 kes Add -8 option to bsmtp command line to add content type utf-8.
985 Fixes bug #809. (Character coding problem in bsmtp).
986 kes If < is found in target (from, to, cc) then do not enclose the
987 target in < > in bsmtp. Fixes bug #772 (malformed address).
988 kes When printing certain items in dbcheck, stop after 300000.
989 Fixes bug #822. (dbcheck loops).
990 kes Incorrect status in Dir after waiting for mount with poll set.
993 kes Extend idea of Prefer Mounted Volumes to mean a volume about
995 kes Print waiting to reserve a device every 5 mins.
997 kes Don't call close_part in label.c if tape and relabel.
998 kes Don't free volume if busy in close() -- should help with
1000 ebl Fix #824 RunScript bug (After script could be execute twice)
1001 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1002 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1003 Add a regression script to test RunScript
1005 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1008 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1009 deprecated. No additional bugs will be fixed, and they will be dropped
1010 in a future release (probably 2.4.0).
1011 kes Change name of wx-console to bwx-console to make it more Bacula
1013 kes Change the name of gnome-console to bgnome-console to make it
1016 kes Some time in March, a Feature Request with patch from Jorj Bauer
1017 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1019 The ability for the director to validate a Client (FD) CN against
1020 an arbitrary set of patterns rather than the hostname, with
1021 A new 'TLS Allowed CN' set of directives which are implemented
1022 in the Client resource. Then pattern matching is used in place
1023 of hostname matching against the Certificate's CN. As an example, we
1024 have certificates which (a) use a local CA, and (b) have a CN of the
1026 kes Add new/changed entry points to Win32 build
1027 kes Create unaccepted-projects for projects that are not accepted.
1028 kes Simplify locking in the reservations system.
1029 kes Add more debug code in reservations.
1030 kes Make sure error condition on reserving a volume is handled correctly.
1031 kes Correct handling of volume_in_use.
1032 kes Correct handling of initializing a device.
1033 kes Move handling of broadcasting releasing a device into release_device().
1034 kes Correct attaching dcr to dev so that it is only done if device
1035 is properly initiated.
1037 kes Locking debug level tweaks in SD.
1038 kes Tweak new Volume code.
1040 kes Add exec external-command [wait-seconds] to bconsole. This
1041 executes the external-command. Note! normally external-command
1042 should be enclosed in double quotes.
1043 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1044 it should normally be off in a production system.
1046 kes Implement die command for SD so that we can force it to dump.
1047 kes Implement SD lock debug code.
1048 kes Implement new algorithm for keeping Volume list in SD. It
1049 is now owned by the device.
1051 kes Implement new code for freeing in use volumes that should
1052 resolve if not all, some of the problems of multiple drive
1053 tape conflicts described in bug 801.
1055 kes Fix gui/bacula-web/images files in svn.
1056 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1058 ebl Fix a bug in batch mode (in string escape)
1059 kes Correct migration prune SQL typo that crept in in a
1060 recent 2.1.x change.
1062 kes Move bnet_despool() into class in bsock.c
1063 kes Modify job report to include director name and Build OS.
1064 kes Move drop root privilege and check_catalog() before fork.
1065 kes Add update database scripts (version 9 to 10) to updatedb directory.
1067 ebl Check size and age of each file after its backup to see if
1068 it has changed during backup, if 'checkfilechanges' is set.
1069 The FD will do an extra check (stat(2)) after
1070 each file backup. mtime, ctime and size are compared with
1071 'before backup' information. If time or size mismatch, an
1072 error message will be generated. You must upgrade FD to use it.
1074 kes Make database name and user configurable
1075 --with-db-name=xxx --with-db-user=xxx
1076 kes Add back database type to message.c for debugging.
1078 kes Implement dir_sql() which issues an SQL query.
1079 kes Modify bat medialist to use dir_sql() and do some minor C++
1080 formatting as well as eliminating a number of pointers, simplifing
1083 kes Fix some of the mtx-changer grep commands for tape label readers.
1084 kes Convert a number of bsendmsg into the appropriate send/warning/error
1085 message class calls.
1086 kes Suppress the using database message in the .sql command.
1087 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1089 kes Add context menu for floating a window.
1090 kes Some minor cleanup and name changes in qt-console
1091 kes Add doing mt setblk 0 in Win32 mtx-changer.
1092 kes Apply Martin's bug fix to move definition of ENODATA for
1094 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1095 sqlite2 and sqlite3.
1097 kes More pruning cleanup.
1098 kes Turn on wait_for_drive by default in mtx-changer.
1099 kes Turn on Batch insert code by default as it now passes regression.
1100 kes Add ./configure --enable-bat to enable building of Bat.
1101 No install yet though.
1103 kes Implement a new .sql command for bat.
1104 kes Implement code to turn off pruning in obtaining the next volume.
1105 Pruning is turned off for the status dir command, but turned on
1106 for SD requests and for the list nextvolume command.
1108 kes Correct Qmsg() that was not updated correctly when committing a
1109 previous change (probably the recent TLS patch).
1111 kes Write new subroutine is_volume_purged() that explicitly checks
1112 if the Volume is purged, and if so marks it as such. This should
1113 resolve problems reported about needing to mount twice to recycle
1115 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1116 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1117 amount of duplicated code.
1118 kes Do volume pruning only for the Media Type desired (reduces pruning time
1119 if multiple Media Types are in the same pool).
1120 kes Implement more detailed info in the Job report for the Bacula version
1122 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1124 ebl Add bbatch tool to bench database and insert mode.
1125 Fix sql quote stuff in batch mode
1126 Fix sql stuff for mysql
1128 kes Correct problems with am/pm scheduling. Fixes bug #808.
1129 kes Implement new prunning code that prunes up to 1000 jobs at
1130 the same time. The same technique can be applied to a number
1131 of other prune/purge subroutines.
1132 kes Add an insanity check when starting a new tape job to ensure
1133 that the tape position has not been changed. If so fail the
1135 kes Fix Win32 build for dlls to add the folllowing:
1136 src/lib/bsock.c -- new file with new entry points
1137 src/lib/dlist.c -- new entry points
1138 src/cats/sql_create.c -- new entry point
1139 src/cats/sql_cmds.c -- new DATA item exported
1141 ebl batch mode cleanup bscan-test is ok now.
1142 kes Implement SD code to check length of disk volume before appending.
1144 kes Correct return status on db_batch... routines.
1145 kes Add call to db_write_batch_file_records() to migration code.
1146 ebl Fix AfterJob timing
1147 kes Move the checking of the database in initializion of the Director
1148 to after we drop privileges. This avoids the need for both root
1149 and bacula access to the DB.
1150 kes Correct a misplaced variable definition in src/filed/backup.c
1151 kes Correct how the new batch insert db_create_attributes_record()
1152 uses the arguments. Caused a seg fault in bscan.
1153 kes Implement lock() and unlock() methods in DEVICE class.
1154 Implement block() and set_block(xx) methods in DEVICE class.
1155 kes Modify bnet_connect() so that it uses time() to check for the
1156 wait time expiring (on some OSes, some system calls may not
1157 return immediately).
1158 kes Modify Verify to obtain the previous JobId when it is actually
1159 running rather than at schedule time (as it was in 1.38.x).
1160 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1162 kes When checking pid in pid file, continue running if the pid is
1163 the same as ours. This occurs on IRIX after a system crash.
1166 kes Extend new GUI API.
1167 kes Make the ua structure a class, and implement send_msg(),
1168 error_msg(), warning_msg(), and info_msg().
1170 kes Apply fix from for building wx-console on the Mac from
1172 kes Implement new select mechanism for GUI programs.
1173 kes Reorganize initialization of stackedWidgets in bat.
1175 kes Add updated nagios plugin supplied by Christian Masopust.
1177 kes More bat implementation.
1178 kes File migrate bug with Pool Occupancy using mediaid instead
1179 of jobids. Fixes bug #795.
1180 kes Fix orphaned buffers in filed backup and verify due to
1181 crypto buffers not freed during errors. Fixes bug #789.
1182 kes Extend new GUI api code to tree commands.
1183 kes Ensure that tree and dot commands check console ACLs.
1184 kes Permit marking directory with trailing slash.
1185 kes Allow 20 console connections (instead of only 10).
1187 kes Add smartctl call to bacula-sd.conf as an example of getting
1190 kes Modify jobq.c to let simultaneous restore jobs run. This may
1191 cause them to fail if they cannot get a drive.
1192 kes Add Client Connect Wait to Storage daemon to permit users to
1193 modify the time the SD waits for a FD connection.
1195 kes Correct virtual changer check which was backwards. This caused
1196 volumes to be unloaded into slots already occupied.
1198 kes Apply Command ACL filter to JobId list in restore command.
1199 kes Correct typeo in var.c patch.
1201 kes Don't let Bacula prune File or Job records for the current Job.
1202 kes Fix variable substitution pad + inc bug reported (with patch)
1205 kes Correct SQLite log table index as reported by Luca Berra.
1207 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1209 kes Begin implementing new comm signals for API.
1210 kes Fix a few places in lib/message.c where the open fd may
1212 kes Continue implementing lib/bsock.c (real class). Make jcr,
1213 who, host, and port private. There are new methods to access
1214 them for non-class use. This required touching a number of files.
1216 kes Add LANG=C to autoconf/randpass so it works with languages other
1217 than English. Fixes bug #788.
1219 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1221 You will not be able to generate Include/Exclude list any more.
1222 It will be fixed soon.
1223 If you want to use this, you can apply
1224 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1226 kes Restore of sockets created false error messages because Bacula
1227 no longer restores sockets, but the code was still trying to
1228 set the attributes on a non-existent file. Reported by a user.
1229 ebl finish RecyclePool feature
1230 Media will takes Pool.RecyclePool
1231 when moving from Scratch to a Pool or when user will do
1232 update volume=xxx frompool
1233 To use it, add RecyclePool = aPool to your Pool resource
1236 RecyclePool = Scratch
1240 kes Expand new BSOCK class adding signal() and new BNET signals.
1241 kes Begin enhancing the dot commands adding a new API function
1242 that returns more information and will make it easier
1243 to interface to the Director from a program.
1245 kes Make DEVICE fd private. Its new name is m_fd, and can be
1246 obtained with dev->fd() outside the class. This is the
1247 first of many DEVICE members to be made private.
1248 kes Implement Michael Renner's idea on having a virtual disk
1249 changer. I made some minor modifications (e.g. I did not
1250 implement the Virtual Changer directive, but simply set
1251 the Changer Command to an empty string.
1253 kes Implement a BSOCK send() method that writes the whole record
1254 in a single write() request rather than in two.
1255 ebl add update volume=xxx recyclepool=yyyy
1256 volume takes recyclepool from pool when using update volume=xxx from pool
1258 kes Fix encryption deblocking bug, which caused some restored files
1259 to be truncated. This fixes bug #763.
1260 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1261 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1263 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1264 ebl Use btime_t instead of uint64_t in media patch.
1266 kes Optimize the use of the database a bit in the Status dir command.
1267 Only open it when needed, ensure that if any previous database
1268 was opened, it is closed.
1270 kes Correct VolCatBytes bug from media patch.
1271 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1272 in the case of orphaned records.
1273 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1274 and File records in 300K chunks to be more efficient. This
1275 idea came from Juan Luis Frances (if I remember right).
1276 kes Apply Eric's scratch patch that moves a purged Volume to
1277 the RecyclePool. Question: how is RecyclePool set? what
1278 happens to the ScratchPool?
1279 kes Apply Eric's media patch that collects read/write media
1280 times as well as byte counts. This patch requires a
1281 simultaneous upgrade of the DIR and SD. Note, there
1282 should be some way to turn off timing. I'm not sure
1283 times are in Bacula units.
1284 kes Apply Eric's batch-insert patch.
1286 kes Update projects list.
1288 kes Implement Include/Exclude file lists in FD as dlists using
1289 the new dlistString class. This permits efficiently having
1290 large include/exclude lists and completes project Item 25.
1291 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1292 console is authorized to cancel the job. This fixes bug
1294 kes Modify SD so that the VolCatJobs medium record is updated
1295 at the beginning of a Job rather than the end. This
1296 fixes bug #775 where exceeding MaxVolJobs caused jobs
1298 kes Added a mutex around getting and setting Volume information
1299 so that multiple simultaneous jobs will single thread.
1301 Switch to using Subversion
1302 kes Remove src/pygtk-console/ from configure
1304 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1305 plus the entrypoints.
1306 kes Apply patch supplied that corrects debug print
1307 in canceling jobs for max run time. Supplied as
1308 part of bug #621, which was previously fixed.
1310 kes Test on job_canceled() and sd_msg_thread_done inside
1311 loop starting the message thread to avoid a race condition.
1313 kes Remove rl_catch_signal from console.c as it conflicted
1314 with the header definition. Fixes bug #765.
1315 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1317 kes Clarify some stored/acquire messages to indicate if the
1318 problem is with read or append.
1320 kes Fix memory leak with storage ids in cats/sql_get.c
1321 kes Terminate watchdog earlier to avoid reference to released
1322 memory -- reported by Jason Austin.
1323 kes Move closing the database from jobq.c to the director daemon
1324 termination routine. This fixes memory leaks for shadow jobs
1325 (i.e. migration jobs).
1326 kes Free up the unique jobid chain items in migrate.c. This fixes
1327 a memory leak problem.
1328 kes Convert some ugly looking for statements to use foreach_alist
1329 in findlib/find.c. This will facilitate converting the structures
1330 to use dlist (for large include/exclude lists).
1331 kes Fix a bug in the btree.c and btree.h routines, then rename them
1332 rblist and add them to be built in src/lib. Include some new
1333 methods written by Rudolf Cejka that make the code more readable
1334 (hides some of the ugly casting).
1335 kes Add set_next() and set_prev() methods which make the code much more
1336 readable. Also add a new dlistString class that facilitates storing
1337 strings in dlists. To be used in the large include/exclude lists.
1338 kes Make some trivial modifications to lib/tree.h that use rblist
1339 rather than dlist for storing the tree links. This was suggested
1340 by Rudolf Cejka. The result of this is that the restore tree now
1341 uses red-black binary trees rather than simple linked lists. This
1342 should give rather dramatic speed improvements for directories
1343 contining large numbers of directories/files (more than 10000).
1345 kes Fix maxruntime bug #621.
1347 ebl Implement the include JobID in spool file name project.
1348 kes Reorder projects file in order determined by Jan 2007 vote.
1349 kes Implement item #12 on project list -- quick release of FD by
1351 kes Fix open of SQLite3 db where user does not have write permission
1352 so that DIR does not crash. Fixes bug #761.
1354 kes Add back missing @ in Win32 Makefile.
1355 kes Change 'Device not configured to autolabel' from INFO
1357 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1358 which should restart an indefinite # of times.
1359 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1360 other DIR specifications.
1362 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1363 Fix path quoting in SQLite scripts.
1364 Fix problems with SHGetFolderPath.
1366 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1368 kes Fix Job restart on error bug that promotes an Inc to a Full
1369 backup. This should fix bug #755.
1370 kes Add qt-console and first cut of code.
1374 kes Fix Bacula->Documentation link on Win32 to point to index.html
1375 instead of bacula.html. Fixed bug #750.
1376 kes Return JobId in db_get_job_record() when JobId==0. This should
1378 kes Do not release source pointers when restarting a failed job.
1380 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1381 This *should* fix bug #747.
1382 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1385 kes Modify USTORE constructor to set an empty store_source string,
1386 and don't copy the store_source string in a cancel. Hopefully
1387 this will fix Arno's seg fault, bug #744.
1388 kes Add back code to disable conio in configure. Fixes bug #743.
1389 kes Correct the Options scanner in the FD to correctly handle
1390 SHA1 option, which was eating the next option. Reported by
1392 kes Add code to indicate when the SD is spooling, spool wait, and
1393 despooling as requested by Alan Brown.
1395 Version 2.0.0 released: 4 January 2007