1 Technical notes on version 2.2
5 kes Close bat console windows first to eliminate error message
7 kes Remove useless code in Scheduler that causes seg fault on
9 kes Correct some SD catalog request error messages.
10 kes Don't allow pruning of any running job.
11 kes Turn off code in read_record that causes a seg fault in the SD
12 when reading past an EOS_LABEL.
13 kes Turn off unloading the autochanger in reserve.c as it just
15 kes Lock volumes when unreserving a device.
16 kes Do not mark volume unused when recycling.
17 kes When acquiring, don't mark volume unused if it is reserved (busy).
19 Beta Release Version 2.2.9-b6
21 kes Eliminate ./configure warning on po directory
22 kes Fix bug #1063, reuse of freed ptr in list nextvol.
23 kes Release regex compile buffer in filed/job.c
24 kes Add proper type of const char in sql_create.c
25 kes Turn off debug in daemon termination routines
26 kes Move free_volume_list() before devices are freed in stored.c
27 kes Fix reference to uninitalized stack variables in bregex.c.
28 This should correct bug #1067.
30 kes Fix possible seg fault in SD when freeing a volume entry.
32 kes Apply patch from bug #1069 that corrects spurious error messages
33 when ACLs enabled on SGI but no ACL exists.
34 ebl Fix a storage deamon segfault at debug level 500.
36 Beta Release Version 2.2.9-b4
38 kes Re-enable code to remember last volume mounted on a non-tape
40 kes Add patch supplied in bug #1068 that fixes a SD crash when using
41 a Virtual autochanger.
42 kes Generate correct JobMedia records during spooling/despooling when
43 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
44 <tih@hamartun.priv.no> for excellent analysis and testing.
46 Beta release Version 2.2.9-b3
48 kes Rework certain SD locking based on gdb tracebacks of deadlocks
49 sent by Eric. This code now uses only the volume_lock() rather
50 than the reservations lock when at EOM and acquiring a new
52 kes Ensure only one exit point in several subroutines.
54 Beta release version 2.2.9-b2
56 kes Fix to initial tape drive open to release the volume name
58 Beta release Version 2.2.9-b1
60 kes Fix to JobMedia fix.
61 kes Fix bug pointed out by Peter Much that causes the StorageId to
62 be updated when reading a tape (during migration, it could have
63 been incorrectly set to the write StorageId).
65 kes Implement autostart scripts for Debian
67 kes Fix mtx-changer.in for broken Debian mt program.
69 kes Massive commit of all fixes and back ports to create 2.2.9
71 kes Apply doc fix from bug #1062.
72 kes Resolve crash and improper restore wx-console Win32 restore
74 kes Update Win32 wxWidgets to latest version.
75 kes Attempt to do correct handling of Win32 mount points. Should
77 kes Fix Win32 FD backup/restore memory leak due to improper termination
78 of BackupRead/Write. This fixes bug# 1038.
79 kes Add const to AIX prototype for initgroups()
81 kes Undo bug #1047 heap overrun fix as it is not correct.
83 kes Fix creating first JobMedia record during Migration to include
84 proper index. This caused slow restores of migrated jobs.
86 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
87 and do not strip paths on symbolic links.
88 kes Set catalog backup database and user name from values specified on
90 ebl Apply patch to correct bug #1031, about wrong pool source information
95 kes Apply patch from Martin to correct bug #1040, bscan sets existing
97 kes Fixed important spelling error in doc -- bug #1045.
99 kes Move initialization of read/write res lock earlier in the code.
100 This fixes the crash with a null conf file. This fixes bug
102 kes Redefine CURES in lib/parse_conf to be URES and move it all
103 into lib/parse_conf.c -- this responds to bug #1042, but does
104 not fix it. The fix is not to compile with FORTIFY_SOURCE.
105 kes Backport fix de-referencing a NULL pointer in the scanner from
106 the trunk SVN. I don't think this was reported as a bug.
108 Beta release Version 2.2.8
110 kes Re-enable the new job code editing (%f).
112 kes Fix bsnprintf for float point numbers. I broke recently when
113 parameterizing some variables. This fixes bug #1036.
115 kes Move Heartbeat documentation from Job to Director resource.
116 This fixes bug #1033.
118 kes Fix existing switch drive SD code to call autochanger to release
119 any old volume. This must be done to keep the autochanger from
120 releasing subsequently newly reserved volumes in doing a close().
121 This should possibly fix bugs #1032 and #1018.
122 kes Apply big backport of current SVN SD code that corrects a number
123 of race conditions. This is a first step in fixing bug #1018.
125 ebl Fixes bug #1028 where "Selection Type" option was not usable
129 Release Version 2.2.7
131 kes Partial back out (disabled) %f job code editing because it
132 does not build on Win32.
133 kes Fix seg fault Frank Sweetser reports in regression testing
134 on his systems. The problem was that the original author of
135 bsnprintf.c did not take into account the side effects of
136 using ++x in the argument to a #define.
138 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
139 that implements double quoting include names in conf files,
140 and also allows piping input by having the first character
141 be a vertical bar (|).
142 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
143 that implement %f in RunScripts to pass the FileSet name.
144 kes Skip leading | when lex input comes from a pipe as suggested
145 by Michael Stapelberg <michael@stapelberg.de>.
147 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
148 Nerijus Baliunas <nerijus@users.sourceforge.net>
150 kes This patch corrects a problem where the maximum concurrent storage
151 jobs counter gets out of sync during restore jobs causing jobs to
152 'wait on max Storage jobs'. This patch fixes bug #1009.
154 kes Add new include to postgresql.c suggested by Marc Cousins so
155 that it compiles correctly with pgre version 8.3. Also fix
156 misuse of %x with pointer (should be %p).
158 kes This patch fixes bcopy so that it produces correct Volumes.
160 kes This patch eliminates spurious output to the console during a VerifyVolume
161 job that contains encrypted data. It fixes bug #1024.
163 kes This patch prevents the 'status dir' command from trying to use a scratch
164 volume and possibly moving it from one pool to another. This patch fixes
167 kes Fix --archivedir addition to configure. Replace it with
168 --with-archivedir in configure.in This fixes the regression
170 kes This patch fixes bug #1012 where the job is canceled because
171 of Max Run Time exceeded when the job has not yet started.
173 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
174 one 'part' to write. Instead of each part being stored on disk,
175 written to DVD, then deleted from disk, all parts are written to disk,
176 and only the last is written and deleted from disk.
178 kes Correct typos in disk-changer.in
180 kes This patch fixes the status command to include the formating string for
181 JS_AttrInserting. It fixes bug #1021.
182 kes This patch should fix the Mac OS X build problem on the latest
183 Darwin, where sys/types.h was not included correctly (apparently
184 due to a change in the Mac headers). The solution was to explicitly
185 ensure that it is defined for the ./configure.
186 This patch also has a rebuild of configure that includes the Debian
187 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
188 kes This patch should ensure that queued messages to the console are
189 displayed as soon as possible. It should fix bug #1007, but has been
190 reported not to work.
192 kes This patch fixes the infinite loop when trying to increase the
193 maximum number of volumes in a Pool during the add command.
194 This patch fixes bug #1008.
196 Release Version 2.2.6
198 kes Get fix for joblist bug in bat from trunk.
200 kes This patch fixes bug #1003 where putting the message output from
201 a Verify job into the catalog results in a recursive loop. The problem
202 seems to show up only with postgresql (to be verified).
204 kes Fix bug #942 where lots of emails where generated when the heartbeat
205 interval was low and Bacula wanted a different tape from the one in
208 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
209 which was updated during a restore (or a reading migration) bug #982
211 ebl Use qmake-qt4 instead of qmake when available (debian system).
213 kes Add a security warning to src/cats/make_catalog_backup.in indicating
214 that passing the password via the command line (arg 3) is insecure.
215 This responds to bug #990 (it doesn't fix it).
216 kes Apply 2.2.5-postgresql-errors.patch
217 kes Remove unneeded File table index on JobId, which is already
218 present as the first index of another multi-index.
220 kes Set default debug_level to zero. This corrects bugs #991 and #993.
221 kes Fix a crash in bat when it cannot connect to the Director for example
222 if the Director is not running.
224 kes Activate Close button on tray-monitor window. This fixes
227 kes Fix spurious warning message printed when creating a volume with
228 a LabelFormat. This fixes bug #976.
230 Release Version 2.2.5
232 kes Add JobId in place of Job name in all the Jmsg() output.
233 kes Correct the APP_DESC for the Win32 storage service (remove an e).
235 kes Add new SD despooling attributes and Dir inserting attributes
236 job status codes. This fixes bug #961.
237 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
239 kes Fix doc issue. This fixes bug #963.
240 kes Fix listing performance problems in bat. Pointed out by
242 ebl Fix replace on restore. This fixes bug #969
243 kes Fix bat code that tests for Win32. This should fix bug #968
244 kes Query 5 list wrong Vol after migration. This fixes bug #960
246 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
247 in back porting from 2.3.x
249 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
250 The details are included in the notes in this file.
252 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
253 messages; it fixes a problem opening the SQLite3 database when multiple
254 simultaneous jobs were running; it fixes a bug with certain versions of
255 MySQL where batch inserts failed because of table name character case
256 (upper/lower) differences.
257 kes Fix race condition that drops final block written to volume.
258 This happens in rare cases with multiple simultaneous jobs
259 when the Volume fills. This fixes bug #964. May be related
260 to bug #935 and possibly #903.
262 kes Fix FD->SD authorization failure, which was due to spurious
263 wakeups from a pthread_cond_timedwait(). Simply check the
264 predicate before continuing. This fixes bug #953
265 dvl Add new configuration item --archivedir
266 dvl Adjust regression tests to use tmp not /tmp. This will allow
267 multiple concurrent runs of the regression tests.
269 kes Eliminate more strerror() and replace with bstrerror().
270 kes Remove BSD getopt and replace with unrestricted IBM version.
271 kes Fix Win32 build for changed calling sequences.
273 kes Fix FD->SD authorization failure, which was due to spurious
274 wakeups from a pthread_cond_timedwait(). Simply check the
275 predicate before continuing. This fixes bug #953.
276 kes Add const char where needed (more to do).
278 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
279 kes Don't overwrite error message in check_tables_version.
281 kes Unlock batch insert tables with same calls used elsewhere.
282 kes Allow starting 59 jobs a second.
283 kes Make SD session key more random.
284 kes Add retry for SQLite opening db if it fails. Probably helps
286 kes Suppress extra error messages during batch insert failure.
288 kes Put some FD auth code on dbglvl rather than fixed.
289 kes Return insert attributes error message in db msg buffer to avoid
290 false error messages. Helps fix bug #966.
291 kes Separate batch init error messages. Probably helps fix bug #966.
292 kes If Dir gets an error during inserting attributes, cancel SD.
293 This reduces unnecessary error messages.
295 ebl Cleanup batch insert code. Probably fixes bug #965.
297 kes Turn off some code when batch insert not enabled.
298 kes Edit FD name in connect error messages.
300 kes Add code to handle tray monitor separated from Win32 FD.
301 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
303 kes Fix ANSI tape labeling. This fixes bug #954.
304 kes Increase the max block size to 4MB fixes bug #957.
305 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
306 is not properly mounted (recognized) during a poll.
307 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
308 Job that has differences reports Verify OK.
309 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
311 Release Version 2.2.4
313 kes Increase size of name string when FD making connection to SD.
316 kes Add waits to multiple exit detection code to try to force pid
317 file to always be deleted.
318 kes Restore good dev.tar.gz to rescue set appropriate binary property.
320 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
321 trying to switch drives by checking for blocking before unblocking.
323 kes Cancel storage daemon in all cases where FD reports error. This
324 should fix virtually all cases of bug #920.
326 kes Fix error message that was clobbered when Dir tells SD it does not
327 have write permission on Volume. This should fix a minor point
328 in bug #942, but not the main problem.
329 kes Add code to cancel job in SD if FD connection fails. This should
331 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
332 kes Fix migration code to get correct Volume name with multiple volumes
333 by skipping |. Fixes bug #936.
334 kes Implement patch supplied by Landon to fix bug #944 where using
335 TLS with bconsole uses 99+% of the CPU.
336 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
338 kes Move patches into patches directory.
340 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
343 ebl Using 'm' in bconsole will show messages like before,
344 and not memory usage.
346 Release Version 2.2.3
347 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
350 kes Fix bug #935, and probably also bug #903 where files were not
351 restored. MediaId was not properly set in JobMedia record after
354 kes Add ./configure search in qwt-qt4 for qwt package
355 kes Apply Martin Simmons patch that should turn off the new API usage
356 when batch insert is turned off allowing building on older
359 Release Version 2.2.2
361 ebl Detect if new PosgreSQL batch insert API is present.
362 kes Correct incorrect mempool call causing Director crash.
363 sb Update spec files for 2.2.1 release
365 Release Version 2.2.1
367 kes Update POTFILES.in
368 kes Cleanup a few underquoted AC_DEFUNs in configure
369 kes Apply patch from Martin Simmons that adds a test for va_copy to
372 kes Fix bug #921 by increasing the number of tries to create a new volume
374 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
375 can be called multiple times. Implement a version for machines
376 without va_copy() that gets a big buffer.
378 kes Integrate more portable zone offset code into bsmtp.c
379 Submitted by Attila Fülöp.
381 kes Fix bad SD->FD return status reported by
382 (James Harper) <james.harper@bendigoit.com.au>
383 ebl Fix a bug in read_close_session which return random status
384 thanks to James Harper
386 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
387 and directory names during restore of single file/directories.
388 kes Add sanity checks to .sql command when string is empty. Hopefully
389 that will resolve Dirks Director crash.
391 kes Apply patch submitted by Martin Simmons that corrects a seg fault
392 in the bsmtp chat subroutine when debug is >= 10.
394 kes Fix Director crash when running bat SQL queries.
395 kes Add David's notes on Item 8: Copy pools.
397 kes Rework projects file to be current and ready for a vote.
398 kes Enhance lex scanner error message.
400 kes Tweak LICENSE file to mention BSD code.
401 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
402 if specified on the ./configure.
403 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
404 This class is intended to allow us to open a second bsock to the
405 Director while in the restore subdialog.
407 kes Fix configure to create bat Makefile before creating dependencies.
408 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
409 kes Add a tooltip to the tray monitor.
410 dvl Set the Director's PID file before dropping privs. This fixes
413 kes Update AUTHORs file
414 kes Increase the default max concurrent jobs to 20 in FD and SD to
415 correspond with the default .conf files.
416 kes Rewrite the Win32 service routines. This eliminates the 3 copies
417 some different, of the same file created by RN when porting the
419 kes Rearrange some of the Win32 directories and the placement of the files
421 kes Set DEVELOPER flag in version.h
423 ========================================================================
424 Release Version 2.2.0
426 kes Apply a second doc patch from Marc.
427 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
428 improves the tips section that discusses how to setup multiple
431 kes Update bat README file.
432 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
433 corrects a typo in the Recycle status check in db_find_next_volume().
434 This will probably fix a number of annoying problems with multiple
436 kes Modify most of dird/msgchan.c to use bsock class calls rather than
437 bnet calls -- no functionality change.
439 kes Modify the Verify output to specify if files are missing on
440 the Volume(s) or disk. Fixes confusion in bug #916.
441 kes When more than one Volume is read in a migration job, the last
442 Volume bytes reported are from the last read volume rather than
443 the last written volume. Fixed. This fixes bug #910.
444 kes Fix display of Recycle flag after update volume=foo recycle=yes.
445 It previously printed New Recyle flag is: no. This fixes bug
448 kes Correct seg fault when switching tape drives during restore.
449 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
450 be used until after 2.2.0 release.
452 kes Remove fnmatch() in SD that permitted wild card specifications.
455 kes Fix %g in filename returned by SQL for browse tree reported by
457 kes Fix configure so that it puts config.out in the cwd rather than
459 kes Attempt to fix the locking problem reported by Eric in bug #906.
460 kes Make berrno class to leave errno unchanged after constructor call.
461 kes Make bnet_server use the heap rather than the stack to allocate
462 its socket fd pointers to avoid a crash at termination. Problem
463 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
465 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
466 and putting it in depkgs-qt along with Qt4.3.
468 kes Rework code in acquire.c that switches drives for reading when
469 the Media Type does not match. This should fix bug #906
471 ebl Fix a director segfault during job setup #907
472 kes Correct seg fault in postgresql when first operation returns no
473 rows. Fixes Dirks File browser problem seg fault with bat.
475 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
476 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
479 kes Implement PopUp YES/NO dialog for bat.
481 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
483 kes Correct RunScript to terminate job in FD on failure.
484 kes Change abort_on_error and AbortJobOnError to fail_on_error
485 and FailJobOnError in RunScripts.
486 kes Minor tweaks of code formating in RunScripts, principally to
487 avoid depassing 80 columns.
489 kes Eliminate one #ifdef Win32 in bsmtp
490 kes Implement grow tool to grow a file for testing very large databases.
491 kes Add big-vol-test to test Bacula seeking with > 5GB.
494 kes Modify find_next_volume() to return all values in Media record.
495 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
499 kes Update Release notes
501 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
502 Warning, in previous beta version, all media get from scratch keep their
505 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
506 This should fix bug #842. Made a note to look at removing the temp
507 files at the end of the install.
508 kes Add ability to mount and unmount a file device providing it is
509 marked as being removable and has the appropriate mount and unmount
510 commands defined in the Device resource. This fixes bug #830.
511 kes When applying a storage override, release all previous storage
512 definitions rather than just prepending the new storage.
513 This should prevent a good deal of confusion.
515 kes Implement ./configure search for qwt libraries.
517 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
518 Win32 FD. This should fix bug #893.
519 kes Remove an unnecessary beep in Win32 init code.
520 kes Update copyright dates in Win32 executable about boxes.
521 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
522 code with a BSD getopt.c and getopt.h.
523 kes Remove sched.h from the Win32 compat directory -- not used.
524 kes Remove the Exit menu item from the Win32 tray monitor. If you really
525 need to shut it down, do it through the services panel or the command
527 kes Remove some inappropriate Bacula FSFE copyrights.
528 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
529 kes Fix regress config non-portable test as pointed out by
530 Florian Heigl <florian.heigl@gmail.com>
531 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
532 as pointed out by Florian Heigl <florian.heigl@gmail.com>
534 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
535 Reported by Frank Sweetser.
539 kes Fix client-only build.
540 kes Integrate client-only fixes for bsys (initgroups) and conio from
541 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
542 kes Make arguments to get_scratch_volume() in same order as other
544 kes Rework the prune_volumes() subroutine so that after purging and
545 no volume found in desired pool, it will check for a scratch
546 volume. This prevents recycling the whole scratch pool.
547 kes Add code to status storage to print boffset_t (largefile support).
549 kes Move qwt (Graphics libarary for Qt4) to depkgs.
550 kes You now need a --with-qwt=<dir> to be able to build bat.
551 kes Update src/win32/cats/bacula_cats.def to include the new
552 db_get_query_dbids() call on Win32.
554 kes Correct a problem when selecting a scratch volume and moving
555 it to another pool that lost some columns.
556 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
557 kes Enhance Autochanger error messages to include Volume and device name.
558 kes Rework prune_volumes() code to take account of InChanger flag,
559 and to handle recycling volumes going to the Scratch pool and
560 current pool because the RecyclePool directive.
561 kes Implement a better and more efficient db_get_query_dbids() to
562 handle creating and passing back a list of DBIds.
566 kes Start work on new more efficient DBId subroutine. First use
567 will be for recycling volume to Scratch inchanger.
568 kes Increase number of JobIds in pruning from 1000 to 10000.
569 This to be replaced by above routine.
570 kes Begin implementation of building Qt4 on Win32.
571 kes Correct typo in fix I added for bad TLS shutdown.
572 kes Pull 2.0.3 patches into patches directory.
573 kes Update Release notes. Include qt-console in line count.
574 kes Update Projects file.
576 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
577 bug in migration code where a job that spanned two volumes
580 kes Implement new BST_DESPOOLING blocked state. Change from locking
581 during despooling in SD to blocking. This means that other threads
582 can work with the device structure, in particular the reservations
583 system while despooling.
585 kes Fix return in reservation message queue that missed clearing
586 the jcr lock (implemented 26Jun07 below).
587 kes Rename a number of dev methods to make locking function names
589 kes Document locking in lock.c. Move lock structures to new file
592 kes Move reservations message lock to lock jcr only this
594 kes Move main SD locking code into lock.c (new file).
595 kes Update Win32 build to include lock.c
599 kes Dirk committed the qwt library code for drawing graphs in bat.
600 kes Tweak install of qwt so that it is integrated with ./configure.
602 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
603 out by Eric (my typo).
604 ebl Fix configure.in to get batch mode enable
605 kes Return correct string from authenticate.cpp in bat when connecting
607 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
608 spurious line drops when using TLS.
609 kes Do not file reparse points when restoring a file that already
612 kes Implement Windows reparse points -- similar to directories, but
613 we do not descend into it. This is a first cut. They seem to
614 be backed up, but restore is not yet tested.
615 kes Remove restore_blocking in tls code when shutting a socket to leave
616 it in blocking mode. Hopefully this will fix the encryption bug
617 reported by Frank Sweetser.
618 kes When opening a file for backup, tell the OS that we are going to
619 read it sequentially -- optimization.
620 kes Change variable names in authenticate_director() to not conflict
621 with member names in bat. Caused great confusion with compiler,
624 kes Queue openssl error messages in case of comm problem.
625 kes Do shutdown() call if socket terminated.
626 kes Remove some duplicated code in tls.c
627 kes Move more of the bsock member variables into private and access
629 kes Add Frank Sweetser's tls-test to the regression suite.
631 kes Add Swedish sv.po file
633 kes Don't print clock skew message in FD if less than 3 seconds diff.
634 kes Add a bit of VSS info to status client.
635 kes Implement a first cut of Vista VSS, using Win2003 code.
639 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
640 loaded tape but uses first drive).
641 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
642 This was indeed a Win32 issue.
644 kes Simplify search of autochanger for in-use Volume.
645 kes Fix exit condition of check for in-use volume. kes Remove
646 inappropriate my_postgresql_free_result() in db_close()
648 kes Fix bad return in FD when encryption signature not found.
649 Probably caused a crash.
650 kes Inhibit missing encryption signature error messages for
651 file types where no signature computed.
652 kes Correct inverted check on autochanger in reservation system.
653 kes Tweak debug code in autochanger reservation.
655 kes Add some additional locking in the cats directory in subroutines
656 that modify packet variables called from batch insert.
657 kes Rework how dcrs are allocated. new_dcr() can now be called
658 with an existing pointer, and it will simply clean it up.
659 This allows the reservation system to test various different
660 devices, and will permit easy device changes.
661 kes A bunch of changes all over to handle new new_dcr() calling
663 kes Work more on the Volume management in the SD. Remember Volumes
664 for tape drives and for autochangers (even virtual disk changers).
665 kes When looking at the Volume list to reserve a drive, handle
666 autochanger names correctly by interating through the changer
667 devices. Also call the Director to see if a Volume is suitable
669 kes Fix some bugs in bscan. Make sure all media records are written.
670 Make sure that valid JobMedia records are written for disk files.
671 Previously they were completely wrong.
672 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
673 that the URLs don't change and so that the developers will all
674 work off the same copy. Rebuild from scrach.
675 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
679 kes Fix seg fault in FD from incorrect digest size.
680 kes Fix argument to non-OpenSSL crypto.c subroutine.
684 kes Remove a few malloc()s from the encryption code.
685 kes Use the class calls to bsock in filed/backup.c and restore.c in
686 place of the old bnet_xxx code.
687 kes Implement code that does an on the fly calculation of the
688 signing digest during restore of encrypted files. It makes
689 a best guess at the algorithm, and if it is not correct, will
690 then revert to the old code which reads the file after it is
692 kes Implement at least one missing crypto stream in stream_to_ascii()
693 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
694 #877 where a reload with bad syntax causes Dir to exit.
696 Cut: 2.1.14 beta (not released)
698 kes Do not free a volume on a tape drive until another volume is
699 mounted and read, or the autochanger unloads the volume.
700 This should help the SD re-use volumes that are already mounted,
701 and should fix bug #886.
702 kes Apply patch from user brettedgar that allows gnome2-console include
703 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
704 kes Apply patch from Lucien Weller that fixes day of week calculation
705 because of DST flag problem. Fixes bug #887.
707 kes Move find_next_appendable_volume() to after acquiring a valid device
708 in reserve.c. This fixes bug #864 -- confirmed by reporter.
710 kes Unable to reproduce bug 872. However added additional testing for
712 kes Bug #874 resolved by documenting SQLite limitations.
713 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
714 kes Bug #881 resolved by removing typo in mtx-changer script.
715 kes Made Frank Sweetser's wiki the official Bacula wiki with his
716 approval. Added a link to the wiki on the web page, and implemented
717 a backup from http://paramount.ind.wpi.edu
719 kes Fix update allfrompool to pass pool name.
721 kes Convert to pure GPL v2 license.
722 kes Fix sscanf problems reported by Peter Buschman that caused
723 a bus error on Solaris.
724 kes Rework (simplify) the select prompt in bat.
725 kes Move get_jobid_from_tid() into lib and create a
727 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
728 should definitely fix the problem of lost error messages in the
730 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
731 kes Eliminate tcpd.h from the project. Enclose the #include from the
732 library with extern C ...
733 kes Add print of signal name when a signal is trapped.
737 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
739 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
740 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
741 makes SQLit3 run 30 times faster, though a bit less safe.
742 kes Implement --with-batch-insert in configure and detection of thread
743 safe libraries. It is on by default, but turned off if no thread
744 safe library (e.g. SQLite 2) is available.
746 kes Fix Bacula PostgreSQL buffer overruns.
747 kes Do better checking for NULL results returned from PostgreSQL;
748 implement retry for failed queries; clear results buffer after
749 failed query. Hopefully this will correct the PostgreSQL failures.
751 kes Implement algorithm to handle only one appendable volume with
752 Prefer Mounted Volumes = no.
753 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
754 returned from a query.
755 kes Make volume lock recursive.
756 kes Implement an additional volume reservation algorithm that
757 starts by considering all reserved volumes then uses the
758 old brute force algorithm of searching the resources to
759 find a suitable device.
760 kes Add new reservations debug code and refine the old code.
761 kes Update the win32/dll/bacula.defs file.
763 kes Tweak reservations algorithm to permit a few more cases, i.e.
764 volume reserved, but on different drive, ...
765 kes Enhance SD status to include Pool and Media Type for drive in a
766 more readable format (a bit longer).
767 kes Fix PostgreSQL double free.
769 kes Minor refactoring of restore decryption code.
770 kes Add code to smartall.c to detect double free of a buffer.
772 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
773 so that bsmtp will create a correct email address (mailbox only).
774 kes Modify 'memory' command so that the buffers are listed as 'In use'
775 to avoid confusion with Orphaned buffers.
776 kes I reworked the OpenSSL include/lib flags to be handled in
777 the standard Bacula way, which should fix bug #863 concerning
778 non-standard OpenSSL libraries.
780 kes Implement Help Browser window for bat.
781 kes Fix reload bug that reset StorageId to zero.
783 kes Fix TLS #ifdefing when TLS turned off.
784 kes Ensure that when labelling a tape with Slot=0 that InChanger
786 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
788 kes Add StartTime to final uar_sel_jobid_temp query so that we can
789 add DISTINCT (required by PostgreSQL).
790 kes Implement BSOCK authenticate_director() method. Eventually will
791 authenicate all daemons.
792 kes Move several more functions into the BSOCK class.
794 kes Add code to tell the OS that we no longer need a cached
795 file that we were reading. In findlib/bfile.c. Also,
796 only cache files that we are reading. Thanks to
797 Tobias Oetiker <tobi@oetiker.ch> for the idea.
798 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
799 kes Implement script to automatically generate cats and dll .def
801 kes Update README.mingw32 to include new .def file generation.
802 kes Correct typo in UTF-8 error message as reported by:
803 jhernandez <julianhernandez@gmail.com>
804 kes Add additional sm_check() code on debug level 1.
805 kes Set default debug level to 1.
806 kes Trap SIGABRT in attempt to get traceback.
808 kes Reduce bat connect timeout from 30 to 15 seconds.
809 kes More restructuring and implementing BSOCK class in place of
811 kes Remove a few unnecessary malloc() tests in crypto code.
812 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
813 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
814 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
816 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
818 kes Fix Verify InitCatalog. The attributes were not pointing to the
819 correct saved location.
820 kes Implement message callback so that GUI is sure to get all
821 daemon messages. Currently displayed in a dialog in bat.
822 kes Ignore SIGUSR2 (Bacula timer) in bat.
823 kes Apply regress patch from bug #859 to allow regress to work
824 with Solaris compiler.
826 kes Begin adding TLS support to bat.
827 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
828 clean up lex.c and make it more readable.
830 kes Move more bnet functions into the BSOCK class.
831 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
832 kes Complete change of berrno strerror() method to bstrerror()
836 kes Cleanup incorrect email addresses in bsmtp.
837 kes Make bat display initial messages rather than discard them.
839 kes First cut of adding .mod to the run command.
840 kes Implement auto display of messages in bat.
841 kes Enhanced preferences to allow all Bacula output to be
844 kes Try to make bsmtp date routines more generic.
845 kes Fixed bug #856 autochanger documentation.
846 kes Rework bsmtp date editing for Win32. This fixes bug #854.
847 kes Add new cats entry point so Win32 builds.
849 kes Attempt to fix bsmtp date editing on OSes without %z editing.
851 kes Do better checking for the MySQL 64 bit libraries looking for both
852 .a and .so libraries.
853 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
854 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
855 kes Require the thread safe version of MySQL during configure. Thanks
856 to Andre Noll for pointing this out.
857 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
858 continuing in migration code.
859 kes Apply implementation of tray-monitor font derived from gnome-console
860 submitted by Andreas Piesk <a.piesk@gmx.net>
862 kes Eliminate important memory loss in SQLite
863 kes Fixed the batch insert MySQL thread specific data that was not
864 being freed. See cats/mysql.c:db_thread_cleanup().
865 kes Fix restore before command.
866 kes Convert old hdr.name to name() in a few places.
867 kes Implement update jobid command.
868 kes Return all time_t dates in db_get_job_record()
869 kes Stop watchdog in SD earlier.
870 kes Put Pool just after Storage in please mount message.
871 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
874 kes Update the po files.
875 kes Fix Verify InitCatalog by making it cache attributes.
877 kes Change name bacula-bat to bat for man 1 page to correspond to
879 kes Check for client and store NULL pointers in status command. This
881 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
882 kes Fix sign extended editing of %p.
883 kes Clean out a little old #ifdefing in cats/mysql.c
885 kes If time diff between DIR and FD is more than 600 seconds convert
886 INFO message to WARNING.
887 kes Implement heap size display in status for all daemons.
888 kes Attempt to fix MySQL db open memory loss (not successfull).
889 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
890 kes Eliminate memory loss in MySQL (possibly other SQLs) during
891 Query. This looks like a MySQL but but by doing extra releases,
892 the memory goes away. This should fix bug #847.
894 kes When backup fails, cancel SD before waiting for sd termination.
895 kes If SD is waiting for FD to connect during cancel, wake up the
897 kes Fix fsf code so that errno is correctly reported.
898 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
900 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
901 so that Bacula doesn't later stumble into a seg fault.
902 kes Use the term Restore Client in the restore Job report.
903 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
904 the original job's FileSetId.
905 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
906 spooling in migration jobs. Not yet tested.
907 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
908 reading conf file from a pipe. However, do it with open_bpipe()
909 rather than popen. Not yet tested.
911 kes Fix an ugly bug where the VolCatBytes were getting updated
913 kes Implement bconsole memory command that prints current memory
914 usage, plus smartalloc dump.
915 kes Clarify some error messages in backup, admin, and migrate.
916 kes Shrink label dialog to smaller size.
917 kes Invert Cancel OK buttons on restore to be OK Cancel.
918 kes More strerror() to bstrerror() conversions.
920 kes Start implementing bstrerror() in place of strerror().
921 kes Stripping path -- seems to work.
923 kes Prevent door and port files from being restored (mostly
925 kes Free an unreleased buffer in compat code.
926 kes Change console Job name from *Console* to -Console- to eliminate
927 Win32 filename problems. Put Win32 path separator when creating
928 Console file. This fixes bug #846.
929 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
931 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
933 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
934 to force Win32 error message.
936 kes First cut strip path. The data should be passed to the FD,
937 but nothing is done with it yet.
938 kes Enhance the digest and signature routines in the crypto
939 library to accept a JCR and to use it to print error messages
940 so that they will go in the Job report rather than the daemon's
942 kes Simplify some of the verify signature code.
943 kes Simplify a few of the alternative returns in the signature
946 ebl Use only POSIX regex instead of GNU regex in breg.c for
947 File relocation. It fix broken freebsd compilation.
948 kes Convert all other Dir files to use new ua class message
950 kes Tentative fix for missing digest signature in bug 807.
951 kes Correct handle problem in new win32_ftruncate routine.
952 kes Convert ua_purge.c and ua_update.c to use new ua class
953 message routines for bat.
955 kes Correct incorrect installation of LICENSE in Win32 installer.
956 kes Display LICENSE at the beginning of the Win32 install.
957 kes Attempt to correct the need for the png files to be installed
959 kes Reapply my bat.conf install script in qt-console. I think I
960 editted bat.pro instead of bat.pro.in and it was lost.
961 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
962 the /var/lock/subsys for subsysdir. Also corrects typos in the
965 kes First cut update job.
966 kes Correct configure to include qmake of src/qt-console directory.
968 kes Make restore job yes/mod/no print in one command so GUI works.
969 kes First cut implementing backup and restore client.
970 kes Correct editing in Verify output that caused a seg fault.
972 kes Insure that bat.conf is not overwritten during installation.
973 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
974 while I was implementing migration in March 2006 !
976 ebl Cleanup file relocation, using char *RegexWhere instead of
977 char *where + bool where_use_regexp
978 kes Update some manpages and add bat manpage.
979 kes Make a first cut at converting bacula.spec.in for bwx-console
981 kes Apply patch from John Goerzen to add hostname as fourth argument
982 to make_catalog_backup script.
983 kes Fix typos I introduced into bsmtp.c
984 kes Make pm_strxxx() routines handle input of NULL pointer. This
985 is to protect from NULL pointers returned from SQL databases.
986 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
987 kes Add more debug to FIFO code -- fix fifo regression test.
989 kes Implement posix_fadvise in FD, and for reading spool files in SD.
990 kes Add thread timer to bnet_connect() to break from OS if wait time
993 kes Update Win32 build to include new files, new symbols, and
995 kes Implement socket level heartbeat (tcp_keepidle)
996 ebl Commit File relocation patch
997 kes Make bat have 'make install' target.
998 kes Warn during install if old gnome-console binary found.
999 kes Warn during install if old wx-console binary found.
1000 kes Add -8 option to bsmtp command line to add content type utf-8.
1001 Fixes bug #809. (Character coding problem in bsmtp).
1002 kes If < is found in target (from, to, cc) then do not enclose the
1003 target in < > in bsmtp. Fixes bug #772 (malformed address).
1004 kes When printing certain items in dbcheck, stop after 300000.
1005 Fixes bug #822. (dbcheck loops).
1006 kes Incorrect status in Dir after waiting for mount with poll set.
1009 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1011 kes Print waiting to reserve a device every 5 mins.
1013 kes Don't call close_part in label.c if tape and relabel.
1014 kes Don't free volume if busy in close() -- should help with
1016 ebl Fix #824 RunScript bug (After script could be execute twice)
1017 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1018 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1019 Add a regression script to test RunScript
1021 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1024 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1025 deprecated. No additional bugs will be fixed, and they will be dropped
1026 in a future release (probably 2.4.0).
1027 kes Change name of wx-console to bwx-console to make it more Bacula
1029 kes Change the name of gnome-console to bgnome-console to make it
1032 kes Some time in March, a Feature Request with patch from Jorj Bauer
1033 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1035 The ability for the director to validate a Client (FD) CN against
1036 an arbitrary set of patterns rather than the hostname, with
1037 A new 'TLS Allowed CN' set of directives which are implemented
1038 in the Client resource. Then pattern matching is used in place
1039 of hostname matching against the Certificate's CN. As an example, we
1040 have certificates which (a) use a local CA, and (b) have a CN of the
1042 kes Add new/changed entry points to Win32 build
1043 kes Create unaccepted-projects for projects that are not accepted.
1044 kes Simplify locking in the reservations system.
1045 kes Add more debug code in reservations.
1046 kes Make sure error condition on reserving a volume is handled correctly.
1047 kes Correct handling of volume_in_use.
1048 kes Correct handling of initializing a device.
1049 kes Move handling of broadcasting releasing a device into release_device().
1050 kes Correct attaching dcr to dev so that it is only done if device
1051 is properly initiated.
1053 kes Locking debug level tweaks in SD.
1054 kes Tweak new Volume code.
1056 kes Add exec external-command [wait-seconds] to bconsole. This
1057 executes the external-command. Note! normally external-command
1058 should be enclosed in double quotes.
1059 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1060 it should normally be off in a production system.
1062 kes Implement die command for SD so that we can force it to dump.
1063 kes Implement SD lock debug code.
1064 kes Implement new algorithm for keeping Volume list in SD. It
1065 is now owned by the device.
1067 kes Implement new code for freeing in use volumes that should
1068 resolve if not all, some of the problems of multiple drive
1069 tape conflicts described in bug 801.
1071 kes Fix gui/bacula-web/images files in svn.
1072 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1074 ebl Fix a bug in batch mode (in string escape)
1075 kes Correct migration prune SQL typo that crept in in a
1076 recent 2.1.x change.
1078 kes Move bnet_despool() into class in bsock.c
1079 kes Modify job report to include director name and Build OS.
1080 kes Move drop root privilege and check_catalog() before fork.
1081 kes Add update database scripts (version 9 to 10) to updatedb directory.
1083 ebl Check size and age of each file after its backup to see if
1084 it has changed during backup, if 'checkfilechanges' is set.
1085 The FD will do an extra check (stat(2)) after
1086 each file backup. mtime, ctime and size are compared with
1087 'before backup' information. If time or size mismatch, an
1088 error message will be generated. You must upgrade FD to use it.
1090 kes Make database name and user configurable
1091 --with-db-name=xxx --with-db-user=xxx
1092 kes Add back database type to message.c for debugging.
1094 kes Implement dir_sql() which issues an SQL query.
1095 kes Modify bat medialist to use dir_sql() and do some minor C++
1096 formatting as well as eliminating a number of pointers, simplifing
1099 kes Fix some of the mtx-changer grep commands for tape label readers.
1100 kes Convert a number of bsendmsg into the appropriate send/warning/error
1101 message class calls.
1102 kes Suppress the using database message in the .sql command.
1103 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1105 kes Add context menu for floating a window.
1106 kes Some minor cleanup and name changes in qt-console
1107 kes Add doing mt setblk 0 in Win32 mtx-changer.
1108 kes Apply Martin's bug fix to move definition of ENODATA for
1110 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1111 sqlite2 and sqlite3.
1113 kes More pruning cleanup.
1114 kes Turn on wait_for_drive by default in mtx-changer.
1115 kes Turn on Batch insert code by default as it now passes regression.
1116 kes Add ./configure --enable-bat to enable building of Bat.
1117 No install yet though.
1119 kes Implement a new .sql command for bat.
1120 kes Implement code to turn off pruning in obtaining the next volume.
1121 Pruning is turned off for the status dir command, but turned on
1122 for SD requests and for the list nextvolume command.
1124 kes Correct Qmsg() that was not updated correctly when committing a
1125 previous change (probably the recent TLS patch).
1127 kes Write new subroutine is_volume_purged() that explicitly checks
1128 if the Volume is purged, and if so marks it as such. This should
1129 resolve problems reported about needing to mount twice to recycle
1131 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1132 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1133 amount of duplicated code.
1134 kes Do volume pruning only for the Media Type desired (reduces pruning time
1135 if multiple Media Types are in the same pool).
1136 kes Implement more detailed info in the Job report for the Bacula version
1138 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1140 ebl Add bbatch tool to bench database and insert mode.
1141 Fix sql quote stuff in batch mode
1142 Fix sql stuff for mysql
1144 kes Correct problems with am/pm scheduling. Fixes bug #808.
1145 kes Implement new prunning code that prunes up to 1000 jobs at
1146 the same time. The same technique can be applied to a number
1147 of other prune/purge subroutines.
1148 kes Add an insanity check when starting a new tape job to ensure
1149 that the tape position has not been changed. If so fail the
1151 kes Fix Win32 build for dlls to add the folllowing:
1152 src/lib/bsock.c -- new file with new entry points
1153 src/lib/dlist.c -- new entry points
1154 src/cats/sql_create.c -- new entry point
1155 src/cats/sql_cmds.c -- new DATA item exported
1157 ebl batch mode cleanup bscan-test is ok now.
1158 kes Implement SD code to check length of disk volume before appending.
1160 kes Correct return status on db_batch... routines.
1161 kes Add call to db_write_batch_file_records() to migration code.
1162 ebl Fix AfterJob timing
1163 kes Move the checking of the database in initializion of the Director
1164 to after we drop privileges. This avoids the need for both root
1165 and bacula access to the DB.
1166 kes Correct a misplaced variable definition in src/filed/backup.c
1167 kes Correct how the new batch insert db_create_attributes_record()
1168 uses the arguments. Caused a seg fault in bscan.
1169 kes Implement lock() and unlock() methods in DEVICE class.
1170 Implement block() and set_block(xx) methods in DEVICE class.
1171 kes Modify bnet_connect() so that it uses time() to check for the
1172 wait time expiring (on some OSes, some system calls may not
1173 return immediately).
1174 kes Modify Verify to obtain the previous JobId when it is actually
1175 running rather than at schedule time (as it was in 1.38.x).
1176 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1178 kes When checking pid in pid file, continue running if the pid is
1179 the same as ours. This occurs on IRIX after a system crash.
1182 kes Extend new GUI API.
1183 kes Make the ua structure a class, and implement send_msg(),
1184 error_msg(), warning_msg(), and info_msg().
1186 kes Apply fix from for building wx-console on the Mac from
1188 kes Implement new select mechanism for GUI programs.
1189 kes Reorganize initialization of stackedWidgets in bat.
1191 kes Add updated nagios plugin supplied by Christian Masopust.
1193 kes More bat implementation.
1194 kes File migrate bug with Pool Occupancy using mediaid instead
1195 of jobids. Fixes bug #795.
1196 kes Fix orphaned buffers in filed backup and verify due to
1197 crypto buffers not freed during errors. Fixes bug #789.
1198 kes Extend new GUI api code to tree commands.
1199 kes Ensure that tree and dot commands check console ACLs.
1200 kes Permit marking directory with trailing slash.
1201 kes Allow 20 console connections (instead of only 10).
1203 kes Add smartctl call to bacula-sd.conf as an example of getting
1206 kes Modify jobq.c to let simultaneous restore jobs run. This may
1207 cause them to fail if they cannot get a drive.
1208 kes Add Client Connect Wait to Storage daemon to permit users to
1209 modify the time the SD waits for a FD connection.
1211 kes Correct virtual changer check which was backwards. This caused
1212 volumes to be unloaded into slots already occupied.
1214 kes Apply Command ACL filter to JobId list in restore command.
1215 kes Correct typeo in var.c patch.
1217 kes Don't let Bacula prune File or Job records for the current Job.
1218 kes Fix variable substitution pad + inc bug reported (with patch)
1221 kes Correct SQLite log table index as reported by Luca Berra.
1223 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1225 kes Begin implementing new comm signals for API.
1226 kes Fix a few places in lib/message.c where the open fd may
1228 kes Continue implementing lib/bsock.c (real class). Make jcr,
1229 who, host, and port private. There are new methods to access
1230 them for non-class use. This required touching a number of files.
1232 kes Add LANG=C to autoconf/randpass so it works with languages other
1233 than English. Fixes bug #788.
1235 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1237 You will not be able to generate Include/Exclude list any more.
1238 It will be fixed soon.
1239 If you want to use this, you can apply
1240 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1242 kes Restore of sockets created false error messages because Bacula
1243 no longer restores sockets, but the code was still trying to
1244 set the attributes on a non-existent file. Reported by a user.
1245 ebl finish RecyclePool feature
1246 Media will takes Pool.RecyclePool
1247 when moving from Scratch to a Pool or when user will do
1248 update volume=xxx frompool
1249 To use it, add RecyclePool = aPool to your Pool resource
1252 RecyclePool = Scratch
1256 kes Expand new BSOCK class adding signal() and new BNET signals.
1257 kes Begin enhancing the dot commands adding a new API function
1258 that returns more information and will make it easier
1259 to interface to the Director from a program.
1261 kes Make DEVICE fd private. Its new name is m_fd, and can be
1262 obtained with dev->fd() outside the class. This is the
1263 first of many DEVICE members to be made private.
1264 kes Implement Michael Renner's idea on having a virtual disk
1265 changer. I made some minor modifications (e.g. I did not
1266 implement the Virtual Changer directive, but simply set
1267 the Changer Command to an empty string.
1269 kes Implement a BSOCK send() method that writes the whole record
1270 in a single write() request rather than in two.
1271 ebl add update volume=xxx recyclepool=yyyy
1272 volume takes recyclepool from pool when using update volume=xxx from pool
1274 kes Fix encryption deblocking bug, which caused some restored files
1275 to be truncated. This fixes bug #763.
1276 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1277 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1279 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1280 ebl Use btime_t instead of uint64_t in media patch.
1282 kes Optimize the use of the database a bit in the Status dir command.
1283 Only open it when needed, ensure that if any previous database
1284 was opened, it is closed.
1286 kes Correct VolCatBytes bug from media patch.
1287 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1288 in the case of orphaned records.
1289 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1290 and File records in 300K chunks to be more efficient. This
1291 idea came from Juan Luis Frances (if I remember right).
1292 kes Apply Eric's scratch patch that moves a purged Volume to
1293 the RecyclePool. Question: how is RecyclePool set? what
1294 happens to the ScratchPool?
1295 kes Apply Eric's media patch that collects read/write media
1296 times as well as byte counts. This patch requires a
1297 simultaneous upgrade of the DIR and SD. Note, there
1298 should be some way to turn off timing. I'm not sure
1299 times are in Bacula units.
1300 kes Apply Eric's batch-insert patch.
1302 kes Update projects list.
1304 kes Implement Include/Exclude file lists in FD as dlists using
1305 the new dlistString class. This permits efficiently having
1306 large include/exclude lists and completes project Item 25.
1307 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1308 console is authorized to cancel the job. This fixes bug
1310 kes Modify SD so that the VolCatJobs medium record is updated
1311 at the beginning of a Job rather than the end. This
1312 fixes bug #775 where exceeding MaxVolJobs caused jobs
1314 kes Added a mutex around getting and setting Volume information
1315 so that multiple simultaneous jobs will single thread.
1317 Switch to using Subversion
1318 kes Remove src/pygtk-console/ from configure
1320 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1321 plus the entrypoints.
1322 kes Apply patch supplied that corrects debug print
1323 in canceling jobs for max run time. Supplied as
1324 part of bug #621, which was previously fixed.
1326 kes Test on job_canceled() and sd_msg_thread_done inside
1327 loop starting the message thread to avoid a race condition.
1329 kes Remove rl_catch_signal from console.c as it conflicted
1330 with the header definition. Fixes bug #765.
1331 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1333 kes Clarify some stored/acquire messages to indicate if the
1334 problem is with read or append.
1336 kes Fix memory leak with storage ids in cats/sql_get.c
1337 kes Terminate watchdog earlier to avoid reference to released
1338 memory -- reported by Jason Austin.
1339 kes Move closing the database from jobq.c to the director daemon
1340 termination routine. This fixes memory leaks for shadow jobs
1341 (i.e. migration jobs).
1342 kes Free up the unique jobid chain items in migrate.c. This fixes
1343 a memory leak problem.
1344 kes Convert some ugly looking for statements to use foreach_alist
1345 in findlib/find.c. This will facilitate converting the structures
1346 to use dlist (for large include/exclude lists).
1347 kes Fix a bug in the btree.c and btree.h routines, then rename them
1348 rblist and add them to be built in src/lib. Include some new
1349 methods written by Rudolf Cejka that make the code more readable
1350 (hides some of the ugly casting).
1351 kes Add set_next() and set_prev() methods which make the code much more
1352 readable. Also add a new dlistString class that facilitates storing
1353 strings in dlists. To be used in the large include/exclude lists.
1354 kes Make some trivial modifications to lib/tree.h that use rblist
1355 rather than dlist for storing the tree links. This was suggested
1356 by Rudolf Cejka. The result of this is that the restore tree now
1357 uses red-black binary trees rather than simple linked lists. This
1358 should give rather dramatic speed improvements for directories
1359 contining large numbers of directories/files (more than 10000).
1361 kes Fix maxruntime bug #621.
1363 ebl Implement the include JobID in spool file name project.
1364 kes Reorder projects file in order determined by Jan 2007 vote.
1365 kes Implement item #12 on project list -- quick release of FD by
1367 kes Fix open of SQLite3 db where user does not have write permission
1368 so that DIR does not crash. Fixes bug #761.
1370 kes Add back missing @ in Win32 Makefile.
1371 kes Change 'Device not configured to autolabel' from INFO
1373 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1374 which should restart an indefinite # of times.
1375 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1376 other DIR specifications.
1378 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1379 Fix path quoting in SQLite scripts.
1380 Fix problems with SHGetFolderPath.
1382 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1384 kes Fix Job restart on error bug that promotes an Inc to a Full
1385 backup. This should fix bug #755.
1386 kes Add qt-console and first cut of code.
1390 kes Fix Bacula->Documentation link on Win32 to point to index.html
1391 instead of bacula.html. Fixed bug #750.
1392 kes Return JobId in db_get_job_record() when JobId==0. This should
1394 kes Do not release source pointers when restarting a failed job.
1396 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1397 This *should* fix bug #747.
1398 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1401 kes Modify USTORE constructor to set an empty store_source string,
1402 and don't copy the store_source string in a cancel. Hopefully
1403 this will fix Arno's seg fault, bug #744.
1404 kes Add back code to disable conio in configure. Fixes bug #743.
1405 kes Correct the Options scanner in the FD to correctly handle
1406 SHA1 option, which was eating the next option. Reported by
1408 kes Add code to indicate when the SD is spooling, spool wait, and
1409 despooling as requested by Alan Brown.
1411 Version 2.0.0 released: 4 January 2007