1 Technical notes on version 2.2
5 kes Rework SD acquire for read to handle autochanger Volume
7 kes Implement regression that explicitly tests swapping a Volume
8 from one drive to another.
9 kes Enhance disk-changer to detect most error conditions.
10 kes Fix SD code so that it properly swaps a Volume between drives.
13 kes Prevent a Volume that is being swapped from being freed from
14 the volume list. This will most likely fix, at least partially,
16 kes Fix strippath so that it does not get a buffer overrun and crash FD.
18 kes Make inability to change owner/group when creating a dir only a
19 warning rather than an error.
21 ebl Fix SQL query in migration code
23 kes Force unload of volume when wrong volume mounted in SD.
25 kes Fix bat seg fault at termination.
26 kes Add Bacula generated version to bat about box.
28 Beta Release Version 2.2.10-b1
30 kes Permit multiple simultaneous restores -- experiment.
32 kes Backport development stream SD reservation system changes.
36 kes Move final volume swapping code to DCR method and
37 call it from acquire_for_read().
38 kes When wrong volume is mounted during read, unload_autochanger.
40 kes Stop searching for Volumes in SD askdir if DIR returns the
41 same volume name twice in a row.
43 kes Tweak the swap Volume from one drive to another code so that
45 kes Resolve several problems with recycling that broke the new
46 code (these problems are in 2.2.9 as well).
47 kes Remove the volume lock when calling the sysop code.
48 kes Don't mark a reserved volume with no writers as unused otherwise
51 kes Rework class structures for VOLRES, DCR, and DEVICE to make
52 the method names a bit more logical, and for more logically
53 handling the responsibilities.
55 kes Remove redundant code in terminating the scheduler that just
56 causes a seg fault in many cases.
57 kes Cleanup releasing a volume and make it a DCR method.
58 kes Improve algorithm for detecting pre-reserved volume and
61 kes Tweak volume swapping code so it works.
62 kes Correct name overloading in mount.c
63 kes Replace released flag in VOLRES with reserved and add access
64 methods for the VOLRES class.
65 kes Prevent volume from being released while being swapped.
66 kes Refactor parts of stored/mount.c
68 ebl Add sanity checks for VolWriteTime and VolReadTime
69 ebl Take care of bad clock changes while computing VolWriteTime
70 and VolReadTime. This should fix or limit #1066
71 kes Correct error string numbers in dird/catreq.c
72 kes Restructure reserving, acquiring, and mounting volumes. Calls to
73 autochanger are deferred for mount.c -- simplifes the code.
75 kes Do not prune any running job. It just fails the job.
76 kes Lock the volumes when changing dev->reserved_device and marking
77 the volume unused otherwise the device can get reserved by
78 another job before the volume is released, thus blocking it.
81 Beta Release Version 2.2.9-b7
83 kes Close bat console windows first to eliminate error message
85 kes Remove useless code in Scheduler that causes seg fault on
87 kes Correct some SD catalog request error messages.
88 kes Don't allow pruning of any running job.
89 kes Turn off code in read_record that causes a seg fault in the SD
90 when reading past an EOS_LABEL.
91 kes Turn off unloading the autochanger in reserve.c as it just
93 kes Lock volumes when unreserving a device.
94 kes Do not mark volume unused when recycling.
95 kes When acquiring, don't mark volume unused if it is reserved (busy).
97 Beta Release Version 2.2.9-b6
99 kes Eliminate ./configure warning on po directory
100 kes Fix bug #1063, reuse of freed ptr in list nextvol.
101 kes Release regex compile buffer in filed/job.c
102 kes Add proper type of const char in sql_create.c
103 kes Turn off debug in daemon termination routines
104 kes Move free_volume_list() before devices are freed in stored.c
105 kes Fix reference to uninitalized stack variables in bregex.c.
106 This should correct bug #1067.
108 kes Fix possible seg fault in SD when freeing a volume entry.
110 kes Apply patch from bug #1069 that corrects spurious error messages
111 when ACLs enabled on SGI but no ACL exists.
112 ebl Fix a storage deamon segfault at debug level 500.
114 Beta Release Version 2.2.9-b5 -- not released
116 Beta Release Version 2.2.9-b4
118 kes Re-enable code to remember last volume mounted on a non-tape
120 kes Add patch supplied in bug #1068 that fixes a SD crash when using
121 a Virtual autochanger.
122 kes Generate correct JobMedia records during spooling/despooling when
123 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
124 <tih@hamartun.priv.no> for excellent analysis and testing.
126 Beta release Version 2.2.9-b3
128 kes Rework certain SD locking based on gdb tracebacks of deadlocks
129 sent by Eric. This code now uses only the volume_lock() rather
130 than the reservations lock when at EOM and acquiring a new
132 kes Ensure only one exit point in several subroutines.
134 Beta release version 2.2.9-b2
136 kes Fix to initial tape drive open to release the volume name
138 Beta release Version 2.2.9-b1
140 kes Fix to JobMedia fix.
141 kes Fix bug pointed out by Peter Much that causes the StorageId to
142 be updated when reading a tape (during migration, it could have
143 been incorrectly set to the write StorageId).
145 kes Implement autostart scripts for Debian
147 kes Fix mtx-changer.in for broken Debian mt program.
149 kes Massive commit of all fixes and back ports to create 2.2.9
151 kes Apply doc fix from bug #1062.
152 kes Resolve crash and improper restore wx-console Win32 restore
153 GUI. Fixes bug #1065.
154 kes Update Win32 wxWidgets to latest version.
155 kes Attempt to do correct handling of Win32 mount points. Should
157 kes Fix Win32 FD backup/restore memory leak due to improper termination
158 of BackupRead/Write. This fixes bug# 1038.
159 kes Add const to AIX prototype for initgroups()
161 kes Undo bug #1047 heap overrun fix as it is not correct.
163 kes Fix creating first JobMedia record during Migration to include
164 proper index. This caused slow restores of migrated jobs.
166 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
167 and do not strip paths on symbolic links.
168 kes Set catalog backup database and user name from values specified on
169 the ./configure line.
170 ebl Apply patch to correct bug #1031, about wrong pool source information
173 Release Version 2.2.8
175 kes Apply patch from Martin to correct bug #1040, bscan sets existing
177 kes Fixed important spelling error in doc -- bug #1045.
179 kes Move initialization of read/write res lock earlier in the code.
180 This fixes the crash with a null conf file. This fixes bug
182 kes Redefine CURES in lib/parse_conf to be URES and move it all
183 into lib/parse_conf.c -- this responds to bug #1042, but does
184 not fix it. The fix is not to compile with FORTIFY_SOURCE.
185 kes Backport fix de-referencing a NULL pointer in the scanner from
186 the trunk SVN. I don't think this was reported as a bug.
188 Beta release Version 2.2.8
190 kes Re-enable the new job code editing (%f).
192 kes Fix bsnprintf for float point numbers. I broke recently when
193 parameterizing some variables. This fixes bug #1036.
195 kes Move Heartbeat documentation from Job to Director resource.
196 This fixes bug #1033.
198 kes Fix existing switch drive SD code to call autochanger to release
199 any old volume. This must be done to keep the autochanger from
200 releasing subsequently newly reserved volumes in doing a close().
201 This should possibly fix bugs #1032 and #1018.
202 kes Apply big backport of current SVN SD code that corrects a number
203 of race conditions. This is a first step in fixing bug #1018.
205 ebl Fixes bug #1028 where "Selection Type" option was not usable
209 Release Version 2.2.7
211 kes Partial back out (disabled) %f job code editing because it
212 does not build on Win32.
213 kes Fix seg fault Frank Sweetser reports in regression testing
214 on his systems. The problem was that the original author of
215 bsnprintf.c did not take into account the side effects of
216 using ++x in the argument to a #define.
218 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
219 that implements double quoting include names in conf files,
220 and also allows piping input by having the first character
221 be a vertical bar (|).
222 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
223 that implement %f in RunScripts to pass the FileSet name.
224 kes Skip leading | when lex input comes from a pipe as suggested
225 by Michael Stapelberg <michael@stapelberg.de>.
227 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
228 Nerijus Baliunas <nerijus@users.sourceforge.net>
230 kes This patch corrects a problem where the maximum concurrent storage
231 jobs counter gets out of sync during restore jobs causing jobs to
232 'wait on max Storage jobs'. This patch fixes bug #1009.
234 kes Add new include to postgresql.c suggested by Marc Cousins so
235 that it compiles correctly with pgre version 8.3. Also fix
236 misuse of %x with pointer (should be %p).
238 kes This patch fixes bcopy so that it produces correct Volumes.
240 kes This patch eliminates spurious output to the console during a VerifyVolume
241 job that contains encrypted data. It fixes bug #1024.
243 kes This patch prevents the 'status dir' command from trying to use a scratch
244 volume and possibly moving it from one pool to another. This patch fixes
247 kes Fix --archivedir addition to configure. Replace it with
248 --with-archivedir in configure.in This fixes the regression
250 kes This patch fixes bug #1012 where the job is canceled because
251 of Max Run Time exceeded when the job has not yet started.
253 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
254 one 'part' to write. Instead of each part being stored on disk,
255 written to DVD, then deleted from disk, all parts are written to disk,
256 and only the last is written and deleted from disk.
258 kes Correct typos in disk-changer.in
260 kes This patch fixes the status command to include the formating string for
261 JS_AttrInserting. It fixes bug #1021.
262 kes This patch should fix the Mac OS X build problem on the latest
263 Darwin, where sys/types.h was not included correctly (apparently
264 due to a change in the Mac headers). The solution was to explicitly
265 ensure that it is defined for the ./configure.
266 This patch also has a rebuild of configure that includes the Debian
267 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
268 kes This patch should ensure that queued messages to the console are
269 displayed as soon as possible. It should fix bug #1007, but has been
270 reported not to work.
272 kes This patch fixes the infinite loop when trying to increase the
273 maximum number of volumes in a Pool during the add command.
274 This patch fixes bug #1008.
276 Release Version 2.2.6
278 kes Get fix for joblist bug in bat from trunk.
280 kes This patch fixes bug #1003 where putting the message output from
281 a Verify job into the catalog results in a recursive loop. The problem
282 seems to show up only with postgresql (to be verified).
284 kes Fix bug #942 where lots of emails where generated when the heartbeat
285 interval was low and Bacula wanted a different tape from the one in
288 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
289 which was updated during a restore (or a reading migration) bug #982
291 ebl Use qmake-qt4 instead of qmake when available (debian system).
293 kes Add a security warning to src/cats/make_catalog_backup.in indicating
294 that passing the password via the command line (arg 3) is insecure.
295 This responds to bug #990 (it doesn't fix it).
296 kes Apply 2.2.5-postgresql-errors.patch
297 kes Remove unneeded File table index on JobId, which is already
298 present as the first index of another multi-index.
300 kes Set default debug_level to zero. This corrects bugs #991 and #993.
301 kes Fix a crash in bat when it cannot connect to the Director for example
302 if the Director is not running.
304 kes Activate Close button on tray-monitor window. This fixes
307 kes Fix spurious warning message printed when creating a volume with
308 a LabelFormat. This fixes bug #976.
310 Release Version 2.2.5
312 kes Add JobId in place of Job name in all the Jmsg() output.
313 kes Correct the APP_DESC for the Win32 storage service (remove an e).
315 kes Add new SD despooling attributes and Dir inserting attributes
316 job status codes. This fixes bug #961.
317 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
319 kes Fix doc issue. This fixes bug #963.
320 kes Fix listing performance problems in bat. Pointed out by
322 ebl Fix replace on restore. This fixes bug #969
323 kes Fix bat code that tests for Win32. This should fix bug #968
324 kes Query 5 list wrong Vol after migration. This fixes bug #960
326 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
327 in back porting from 2.3.x
329 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
330 The details are included in the notes in this file.
332 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
333 messages; it fixes a problem opening the SQLite3 database when multiple
334 simultaneous jobs were running; it fixes a bug with certain versions of
335 MySQL where batch inserts failed because of table name character case
336 (upper/lower) differences.
337 kes Fix race condition that drops final block written to volume.
338 This happens in rare cases with multiple simultaneous jobs
339 when the Volume fills. This fixes bug #964. May be related
340 to bug #935 and possibly #903.
342 kes Fix FD->SD authorization failure, which was due to spurious
343 wakeups from a pthread_cond_timedwait(). Simply check the
344 predicate before continuing. This fixes bug #953
345 dvl Add new configuration item --archivedir
346 dvl Adjust regression tests to use tmp not /tmp. This will allow
347 multiple concurrent runs of the regression tests.
349 kes Eliminate more strerror() and replace with bstrerror().
350 kes Remove BSD getopt and replace with unrestricted IBM version.
351 kes Fix Win32 build for changed calling sequences.
353 kes Fix FD->SD authorization failure, which was due to spurious
354 wakeups from a pthread_cond_timedwait(). Simply check the
355 predicate before continuing. This fixes bug #953.
356 kes Add const char where needed (more to do).
358 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
359 kes Don't overwrite error message in check_tables_version.
361 kes Unlock batch insert tables with same calls used elsewhere.
362 kes Allow starting 59 jobs a second.
363 kes Make SD session key more random.
364 kes Add retry for SQLite opening db if it fails. Probably helps
366 kes Suppress extra error messages during batch insert failure.
368 kes Put some FD auth code on dbglvl rather than fixed.
369 kes Return insert attributes error message in db msg buffer to avoid
370 false error messages. Helps fix bug #966.
371 kes Separate batch init error messages. Probably helps fix bug #966.
372 kes If Dir gets an error during inserting attributes, cancel SD.
373 This reduces unnecessary error messages.
375 ebl Cleanup batch insert code. Probably fixes bug #965.
377 kes Turn off some code when batch insert not enabled.
378 kes Edit FD name in connect error messages.
380 kes Add code to handle tray monitor separated from Win32 FD.
381 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
383 kes Fix ANSI tape labeling. This fixes bug #954.
384 kes Increase the max block size to 4MB fixes bug #957.
385 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
386 is not properly mounted (recognized) during a poll.
387 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
388 Job that has differences reports Verify OK.
389 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
391 Release Version 2.2.4
393 kes Increase size of name string when FD making connection to SD.
396 kes Add waits to multiple exit detection code to try to force pid
397 file to always be deleted.
398 kes Restore good dev.tar.gz to rescue set appropriate binary property.
400 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
401 trying to switch drives by checking for blocking before unblocking.
403 kes Cancel storage daemon in all cases where FD reports error. This
404 should fix virtually all cases of bug #920.
406 kes Fix error message that was clobbered when Dir tells SD it does not
407 have write permission on Volume. This should fix a minor point
408 in bug #942, but not the main problem.
409 kes Add code to cancel job in SD if FD connection fails. This should
411 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
412 kes Fix migration code to get correct Volume name with multiple volumes
413 by skipping |. Fixes bug #936.
414 kes Implement patch supplied by Landon to fix bug #944 where using
415 TLS with bconsole uses 99+% of the CPU.
416 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
418 kes Move patches into patches directory.
420 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
423 ebl Using 'm' in bconsole will show messages like before,
424 and not memory usage.
426 Release Version 2.2.3
427 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
430 kes Fix bug #935, and probably also bug #903 where files were not
431 restored. MediaId was not properly set in JobMedia record after
434 kes Add ./configure search in qwt-qt4 for qwt package
435 kes Apply Martin Simmons patch that should turn off the new API usage
436 when batch insert is turned off allowing building on older
439 Release Version 2.2.2
441 ebl Detect if new PosgreSQL batch insert API is present.
442 kes Correct incorrect mempool call causing Director crash.
443 sb Update spec files for 2.2.1 release
445 Release Version 2.2.1
447 kes Update POTFILES.in
448 kes Cleanup a few underquoted AC_DEFUNs in configure
449 kes Apply patch from Martin Simmons that adds a test for va_copy to
452 kes Fix bug #921 by increasing the number of tries to create a new volume
454 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
455 can be called multiple times. Implement a version for machines
456 without va_copy() that gets a big buffer.
458 kes Integrate more portable zone offset code into bsmtp.c
459 Submitted by Attila Fülöp.
461 kes Fix bad SD->FD return status reported by
462 (James Harper) <james.harper@bendigoit.com.au>
463 ebl Fix a bug in read_close_session which return random status
464 thanks to James Harper
466 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
467 and directory names during restore of single file/directories.
468 kes Add sanity checks to .sql command when string is empty. Hopefully
469 that will resolve Dirks Director crash.
471 kes Apply patch submitted by Martin Simmons that corrects a seg fault
472 in the bsmtp chat subroutine when debug is >= 10.
474 kes Fix Director crash when running bat SQL queries.
475 kes Add David's notes on Item 8: Copy pools.
477 kes Rework projects file to be current and ready for a vote.
478 kes Enhance lex scanner error message.
480 kes Tweak LICENSE file to mention BSD code.
481 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
482 if specified on the ./configure.
483 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
484 This class is intended to allow us to open a second bsock to the
485 Director while in the restore subdialog.
487 kes Fix configure to create bat Makefile before creating dependencies.
488 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
489 kes Add a tooltip to the tray monitor.
490 dvl Set the Director's PID file before dropping privs. This fixes
493 kes Update AUTHORs file
494 kes Increase the default max concurrent jobs to 20 in FD and SD to
495 correspond with the default .conf files.
496 kes Rewrite the Win32 service routines. This eliminates the 3 copies
497 some different, of the same file created by RN when porting the
499 kes Rearrange some of the Win32 directories and the placement of the files
501 kes Set DEVELOPER flag in version.h
503 ========================================================================
504 Release Version 2.2.0
506 kes Apply a second doc patch from Marc.
507 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
508 improves the tips section that discusses how to setup multiple
511 kes Update bat README file.
512 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
513 corrects a typo in the Recycle status check in db_find_next_volume().
514 This will probably fix a number of annoying problems with multiple
516 kes Modify most of dird/msgchan.c to use bsock class calls rather than
517 bnet calls -- no functionality change.
519 kes Modify the Verify output to specify if files are missing on
520 the Volume(s) or disk. Fixes confusion in bug #916.
521 kes When more than one Volume is read in a migration job, the last
522 Volume bytes reported are from the last read volume rather than
523 the last written volume. Fixed. This fixes bug #910.
524 kes Fix display of Recycle flag after update volume=foo recycle=yes.
525 It previously printed New Recyle flag is: no. This fixes bug
528 kes Correct seg fault when switching tape drives during restore.
529 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
530 be used until after 2.2.0 release.
532 kes Remove fnmatch() in SD that permitted wild card specifications.
535 kes Fix %g in filename returned by SQL for browse tree reported by
537 kes Fix configure so that it puts config.out in the cwd rather than
539 kes Attempt to fix the locking problem reported by Eric in bug #906.
540 kes Make berrno class to leave errno unchanged after constructor call.
541 kes Make bnet_server use the heap rather than the stack to allocate
542 its socket fd pointers to avoid a crash at termination. Problem
543 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
545 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
546 and putting it in depkgs-qt along with Qt4.3.
548 kes Rework code in acquire.c that switches drives for reading when
549 the Media Type does not match. This should fix bug #906
551 ebl Fix a director segfault during job setup #907
552 kes Correct seg fault in postgresql when first operation returns no
553 rows. Fixes Dirks File browser problem seg fault with bat.
555 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
556 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
559 kes Implement PopUp YES/NO dialog for bat.
561 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
563 kes Correct RunScript to terminate job in FD on failure.
564 kes Change abort_on_error and AbortJobOnError to fail_on_error
565 and FailJobOnError in RunScripts.
566 kes Minor tweaks of code formating in RunScripts, principally to
567 avoid depassing 80 columns.
569 kes Eliminate one #ifdef Win32 in bsmtp
570 kes Implement grow tool to grow a file for testing very large databases.
571 kes Add big-vol-test to test Bacula seeking with > 5GB.
574 kes Modify find_next_volume() to return all values in Media record.
575 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
579 kes Update Release notes
581 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
582 Warning, in previous beta version, all media get from scratch keep their
585 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
586 This should fix bug #842. Made a note to look at removing the temp
587 files at the end of the install.
588 kes Add ability to mount and unmount a file device providing it is
589 marked as being removable and has the appropriate mount and unmount
590 commands defined in the Device resource. This fixes bug #830.
591 kes When applying a storage override, release all previous storage
592 definitions rather than just prepending the new storage.
593 This should prevent a good deal of confusion.
595 kes Implement ./configure search for qwt libraries.
597 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
598 Win32 FD. This should fix bug #893.
599 kes Remove an unnecessary beep in Win32 init code.
600 kes Update copyright dates in Win32 executable about boxes.
601 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
602 code with a BSD getopt.c and getopt.h.
603 kes Remove sched.h from the Win32 compat directory -- not used.
604 kes Remove the Exit menu item from the Win32 tray monitor. If you really
605 need to shut it down, do it through the services panel or the command
607 kes Remove some inappropriate Bacula FSFE copyrights.
608 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
609 kes Fix regress config non-portable test as pointed out by
610 Florian Heigl <florian.heigl@gmail.com>
611 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
612 as pointed out by Florian Heigl <florian.heigl@gmail.com>
614 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
615 Reported by Frank Sweetser.
619 kes Fix client-only build.
620 kes Integrate client-only fixes for bsys (initgroups) and conio from
621 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
622 kes Make arguments to get_scratch_volume() in same order as other
624 kes Rework the prune_volumes() subroutine so that after purging and
625 no volume found in desired pool, it will check for a scratch
626 volume. This prevents recycling the whole scratch pool.
627 kes Add code to status storage to print boffset_t (largefile support).
629 kes Move qwt (Graphics libarary for Qt4) to depkgs.
630 kes You now need a --with-qwt=<dir> to be able to build bat.
631 kes Update src/win32/cats/bacula_cats.def to include the new
632 db_get_query_dbids() call on Win32.
634 kes Correct a problem when selecting a scratch volume and moving
635 it to another pool that lost some columns.
636 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
637 kes Enhance Autochanger error messages to include Volume and device name.
638 kes Rework prune_volumes() code to take account of InChanger flag,
639 and to handle recycling volumes going to the Scratch pool and
640 current pool because the RecyclePool directive.
641 kes Implement a better and more efficient db_get_query_dbids() to
642 handle creating and passing back a list of DBIds.
646 kes Start work on new more efficient DBId subroutine. First use
647 will be for recycling volume to Scratch inchanger.
648 kes Increase number of JobIds in pruning from 1000 to 10000.
649 This to be replaced by above routine.
650 kes Begin implementation of building Qt4 on Win32.
651 kes Correct typo in fix I added for bad TLS shutdown.
652 kes Pull 2.0.3 patches into patches directory.
653 kes Update Release notes. Include qt-console in line count.
654 kes Update Projects file.
656 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
657 bug in migration code where a job that spanned two volumes
660 kes Implement new BST_DESPOOLING blocked state. Change from locking
661 during despooling in SD to blocking. This means that other threads
662 can work with the device structure, in particular the reservations
663 system while despooling.
665 kes Fix return in reservation message queue that missed clearing
666 the jcr lock (implemented 26Jun07 below).
667 kes Rename a number of dev methods to make locking function names
669 kes Document locking in lock.c. Move lock structures to new file
672 kes Move reservations message lock to lock jcr only this
674 kes Move main SD locking code into lock.c (new file).
675 kes Update Win32 build to include lock.c
679 kes Dirk committed the qwt library code for drawing graphs in bat.
680 kes Tweak install of qwt so that it is integrated with ./configure.
682 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
683 out by Eric (my typo).
684 ebl Fix configure.in to get batch mode enable
685 kes Return correct string from authenticate.cpp in bat when connecting
687 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
688 spurious line drops when using TLS.
689 kes Do not file reparse points when restoring a file that already
692 kes Implement Windows reparse points -- similar to directories, but
693 we do not descend into it. This is a first cut. They seem to
694 be backed up, but restore is not yet tested.
695 kes Remove restore_blocking in tls code when shutting a socket to leave
696 it in blocking mode. Hopefully this will fix the encryption bug
697 reported by Frank Sweetser.
698 kes When opening a file for backup, tell the OS that we are going to
699 read it sequentially -- optimization.
700 kes Change variable names in authenticate_director() to not conflict
701 with member names in bat. Caused great confusion with compiler,
704 kes Queue openssl error messages in case of comm problem.
705 kes Do shutdown() call if socket terminated.
706 kes Remove some duplicated code in tls.c
707 kes Move more of the bsock member variables into private and access
709 kes Add Frank Sweetser's tls-test to the regression suite.
711 kes Add Swedish sv.po file
713 kes Don't print clock skew message in FD if less than 3 seconds diff.
714 kes Add a bit of VSS info to status client.
715 kes Implement a first cut of Vista VSS, using Win2003 code.
719 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
720 loaded tape but uses first drive).
721 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
722 This was indeed a Win32 issue.
724 kes Simplify search of autochanger for in-use Volume.
725 kes Fix exit condition of check for in-use volume. kes Remove
726 inappropriate my_postgresql_free_result() in db_close()
728 kes Fix bad return in FD when encryption signature not found.
729 Probably caused a crash.
730 kes Inhibit missing encryption signature error messages for
731 file types where no signature computed.
732 kes Correct inverted check on autochanger in reservation system.
733 kes Tweak debug code in autochanger reservation.
735 kes Add some additional locking in the cats directory in subroutines
736 that modify packet variables called from batch insert.
737 kes Rework how dcrs are allocated. new_dcr() can now be called
738 with an existing pointer, and it will simply clean it up.
739 This allows the reservation system to test various different
740 devices, and will permit easy device changes.
741 kes A bunch of changes all over to handle new new_dcr() calling
743 kes Work more on the Volume management in the SD. Remember Volumes
744 for tape drives and for autochangers (even virtual disk changers).
745 kes When looking at the Volume list to reserve a drive, handle
746 autochanger names correctly by interating through the changer
747 devices. Also call the Director to see if a Volume is suitable
749 kes Fix some bugs in bscan. Make sure all media records are written.
750 Make sure that valid JobMedia records are written for disk files.
751 Previously they were completely wrong.
752 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
753 that the URLs don't change and so that the developers will all
754 work off the same copy. Rebuild from scrach.
755 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
759 kes Fix seg fault in FD from incorrect digest size.
760 kes Fix argument to non-OpenSSL crypto.c subroutine.
764 kes Remove a few malloc()s from the encryption code.
765 kes Use the class calls to bsock in filed/backup.c and restore.c in
766 place of the old bnet_xxx code.
767 kes Implement code that does an on the fly calculation of the
768 signing digest during restore of encrypted files. It makes
769 a best guess at the algorithm, and if it is not correct, will
770 then revert to the old code which reads the file after it is
772 kes Implement at least one missing crypto stream in stream_to_ascii()
773 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
774 #877 where a reload with bad syntax causes Dir to exit.
776 Cut: 2.1.14 beta (not released)
778 kes Do not free a volume on a tape drive until another volume is
779 mounted and read, or the autochanger unloads the volume.
780 This should help the SD re-use volumes that are already mounted,
781 and should fix bug #886.
782 kes Apply patch from user brettedgar that allows gnome2-console include
783 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
784 kes Apply patch from Lucien Weller that fixes day of week calculation
785 because of DST flag problem. Fixes bug #887.
787 kes Move find_next_appendable_volume() to after acquiring a valid device
788 in reserve.c. This fixes bug #864 -- confirmed by reporter.
790 kes Unable to reproduce bug 872. However added additional testing for
792 kes Bug #874 resolved by documenting SQLite limitations.
793 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
794 kes Bug #881 resolved by removing typo in mtx-changer script.
795 kes Made Frank Sweetser's wiki the official Bacula wiki with his
796 approval. Added a link to the wiki on the web page, and implemented
797 a backup from http://paramount.ind.wpi.edu
799 kes Fix update allfrompool to pass pool name.
801 kes Convert to pure GPL v2 license.
802 kes Fix sscanf problems reported by Peter Buschman that caused
803 a bus error on Solaris.
804 kes Rework (simplify) the select prompt in bat.
805 kes Move get_jobid_from_tid() into lib and create a
807 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
808 should definitely fix the problem of lost error messages in the
810 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
811 kes Eliminate tcpd.h from the project. Enclose the #include from the
812 library with extern C ...
813 kes Add print of signal name when a signal is trapped.
817 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
819 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
820 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
821 makes SQLit3 run 30 times faster, though a bit less safe.
822 kes Implement --with-batch-insert in configure and detection of thread
823 safe libraries. It is on by default, but turned off if no thread
824 safe library (e.g. SQLite 2) is available.
826 kes Fix Bacula PostgreSQL buffer overruns.
827 kes Do better checking for NULL results returned from PostgreSQL;
828 implement retry for failed queries; clear results buffer after
829 failed query. Hopefully this will correct the PostgreSQL failures.
831 kes Implement algorithm to handle only one appendable volume with
832 Prefer Mounted Volumes = no.
833 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
834 returned from a query.
835 kes Make volume lock recursive.
836 kes Implement an additional volume reservation algorithm that
837 starts by considering all reserved volumes then uses the
838 old brute force algorithm of searching the resources to
839 find a suitable device.
840 kes Add new reservations debug code and refine the old code.
841 kes Update the win32/dll/bacula.defs file.
843 kes Tweak reservations algorithm to permit a few more cases, i.e.
844 volume reserved, but on different drive, ...
845 kes Enhance SD status to include Pool and Media Type for drive in a
846 more readable format (a bit longer).
847 kes Fix PostgreSQL double free.
849 kes Minor refactoring of restore decryption code.
850 kes Add code to smartall.c to detect double free of a buffer.
852 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
853 so that bsmtp will create a correct email address (mailbox only).
854 kes Modify 'memory' command so that the buffers are listed as 'In use'
855 to avoid confusion with Orphaned buffers.
856 kes I reworked the OpenSSL include/lib flags to be handled in
857 the standard Bacula way, which should fix bug #863 concerning
858 non-standard OpenSSL libraries.
860 kes Implement Help Browser window for bat.
861 kes Fix reload bug that reset StorageId to zero.
863 kes Fix TLS #ifdefing when TLS turned off.
864 kes Ensure that when labelling a tape with Slot=0 that InChanger
866 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
868 kes Add StartTime to final uar_sel_jobid_temp query so that we can
869 add DISTINCT (required by PostgreSQL).
870 kes Implement BSOCK authenticate_director() method. Eventually will
871 authenicate all daemons.
872 kes Move several more functions into the BSOCK class.
874 kes Add code to tell the OS that we no longer need a cached
875 file that we were reading. In findlib/bfile.c. Also,
876 only cache files that we are reading. Thanks to
877 Tobias Oetiker <tobi@oetiker.ch> for the idea.
878 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
879 kes Implement script to automatically generate cats and dll .def
881 kes Update README.mingw32 to include new .def file generation.
882 kes Correct typo in UTF-8 error message as reported by:
883 jhernandez <julianhernandez@gmail.com>
884 kes Add additional sm_check() code on debug level 1.
885 kes Set default debug level to 1.
886 kes Trap SIGABRT in attempt to get traceback.
888 kes Reduce bat connect timeout from 30 to 15 seconds.
889 kes More restructuring and implementing BSOCK class in place of
891 kes Remove a few unnecessary malloc() tests in crypto code.
892 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
893 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
894 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
896 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
898 kes Fix Verify InitCatalog. The attributes were not pointing to the
899 correct saved location.
900 kes Implement message callback so that GUI is sure to get all
901 daemon messages. Currently displayed in a dialog in bat.
902 kes Ignore SIGUSR2 (Bacula timer) in bat.
903 kes Apply regress patch from bug #859 to allow regress to work
904 with Solaris compiler.
906 kes Begin adding TLS support to bat.
907 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
908 clean up lex.c and make it more readable.
910 kes Move more bnet functions into the BSOCK class.
911 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
912 kes Complete change of berrno strerror() method to bstrerror()
916 kes Cleanup incorrect email addresses in bsmtp.
917 kes Make bat display initial messages rather than discard them.
919 kes First cut of adding .mod to the run command.
920 kes Implement auto display of messages in bat.
921 kes Enhanced preferences to allow all Bacula output to be
924 kes Try to make bsmtp date routines more generic.
925 kes Fixed bug #856 autochanger documentation.
926 kes Rework bsmtp date editing for Win32. This fixes bug #854.
927 kes Add new cats entry point so Win32 builds.
929 kes Attempt to fix bsmtp date editing on OSes without %z editing.
931 kes Do better checking for the MySQL 64 bit libraries looking for both
932 .a and .so libraries.
933 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
934 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
935 kes Require the thread safe version of MySQL during configure. Thanks
936 to Andre Noll for pointing this out.
937 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
938 continuing in migration code.
939 kes Apply implementation of tray-monitor font derived from gnome-console
940 submitted by Andreas Piesk <a.piesk@gmx.net>
942 kes Eliminate important memory loss in SQLite
943 kes Fixed the batch insert MySQL thread specific data that was not
944 being freed. See cats/mysql.c:db_thread_cleanup().
945 kes Fix restore before command.
946 kes Convert old hdr.name to name() in a few places.
947 kes Implement update jobid command.
948 kes Return all time_t dates in db_get_job_record()
949 kes Stop watchdog in SD earlier.
950 kes Put Pool just after Storage in please mount message.
951 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
954 kes Update the po files.
955 kes Fix Verify InitCatalog by making it cache attributes.
957 kes Change name bacula-bat to bat for man 1 page to correspond to
959 kes Check for client and store NULL pointers in status command. This
961 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
962 kes Fix sign extended editing of %p.
963 kes Clean out a little old #ifdefing in cats/mysql.c
965 kes If time diff between DIR and FD is more than 600 seconds convert
966 INFO message to WARNING.
967 kes Implement heap size display in status for all daemons.
968 kes Attempt to fix MySQL db open memory loss (not successfull).
969 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
970 kes Eliminate memory loss in MySQL (possibly other SQLs) during
971 Query. This looks like a MySQL but but by doing extra releases,
972 the memory goes away. This should fix bug #847.
974 kes When backup fails, cancel SD before waiting for sd termination.
975 kes If SD is waiting for FD to connect during cancel, wake up the
977 kes Fix fsf code so that errno is correctly reported.
978 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
980 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
981 so that Bacula doesn't later stumble into a seg fault.
982 kes Use the term Restore Client in the restore Job report.
983 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
984 the original job's FileSetId.
985 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
986 spooling in migration jobs. Not yet tested.
987 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
988 reading conf file from a pipe. However, do it with open_bpipe()
989 rather than popen. Not yet tested.
991 kes Fix an ugly bug where the VolCatBytes were getting updated
993 kes Implement bconsole memory command that prints current memory
994 usage, plus smartalloc dump.
995 kes Clarify some error messages in backup, admin, and migrate.
996 kes Shrink label dialog to smaller size.
997 kes Invert Cancel OK buttons on restore to be OK Cancel.
998 kes More strerror() to bstrerror() conversions.
1000 kes Start implementing bstrerror() in place of strerror().
1001 kes Stripping path -- seems to work.
1003 kes Prevent door and port files from being restored (mostly
1005 kes Free an unreleased buffer in compat code.
1006 kes Change console Job name from *Console* to -Console- to eliminate
1007 Win32 filename problems. Put Win32 path separator when creating
1008 Console file. This fixes bug #846.
1009 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1011 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1013 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1014 to force Win32 error message.
1016 kes First cut strip path. The data should be passed to the FD,
1017 but nothing is done with it yet.
1018 kes Enhance the digest and signature routines in the crypto
1019 library to accept a JCR and to use it to print error messages
1020 so that they will go in the Job report rather than the daemon's
1022 kes Simplify some of the verify signature code.
1023 kes Simplify a few of the alternative returns in the signature
1026 ebl Use only POSIX regex instead of GNU regex in breg.c for
1027 File relocation. It fix broken freebsd compilation.
1028 kes Convert all other Dir files to use new ua class message
1030 kes Tentative fix for missing digest signature in bug 807.
1031 kes Correct handle problem in new win32_ftruncate routine.
1032 kes Convert ua_purge.c and ua_update.c to use new ua class
1033 message routines for bat.
1035 kes Correct incorrect installation of LICENSE in Win32 installer.
1036 kes Display LICENSE at the beginning of the Win32 install.
1037 kes Attempt to correct the need for the png files to be installed
1039 kes Reapply my bat.conf install script in qt-console. I think I
1040 editted bat.pro instead of bat.pro.in and it was lost.
1041 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1042 the /var/lock/subsys for subsysdir. Also corrects typos in the
1045 kes First cut update job.
1046 kes Correct configure to include qmake of src/qt-console directory.
1048 kes Make restore job yes/mod/no print in one command so GUI works.
1049 kes First cut implementing backup and restore client.
1050 kes Correct editing in Verify output that caused a seg fault.
1052 kes Insure that bat.conf is not overwritten during installation.
1053 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1054 while I was implementing migration in March 2006 !
1056 ebl Cleanup file relocation, using char *RegexWhere instead of
1057 char *where + bool where_use_regexp
1058 kes Update some manpages and add bat manpage.
1059 kes Make a first cut at converting bacula.spec.in for bwx-console
1061 kes Apply patch from John Goerzen to add hostname as fourth argument
1062 to make_catalog_backup script.
1063 kes Fix typos I introduced into bsmtp.c
1064 kes Make pm_strxxx() routines handle input of NULL pointer. This
1065 is to protect from NULL pointers returned from SQL databases.
1066 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1067 kes Add more debug to FIFO code -- fix fifo regression test.
1069 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1070 kes Add thread timer to bnet_connect() to break from OS if wait time
1073 kes Update Win32 build to include new files, new symbols, and
1075 kes Implement socket level heartbeat (tcp_keepidle)
1076 ebl Commit File relocation patch
1077 kes Make bat have 'make install' target.
1078 kes Warn during install if old gnome-console binary found.
1079 kes Warn during install if old wx-console binary found.
1080 kes Add -8 option to bsmtp command line to add content type utf-8.
1081 Fixes bug #809. (Character coding problem in bsmtp).
1082 kes If < is found in target (from, to, cc) then do not enclose the
1083 target in < > in bsmtp. Fixes bug #772 (malformed address).
1084 kes When printing certain items in dbcheck, stop after 300000.
1085 Fixes bug #822. (dbcheck loops).
1086 kes Incorrect status in Dir after waiting for mount with poll set.
1089 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1091 kes Print waiting to reserve a device every 5 mins.
1093 kes Don't call close_part in label.c if tape and relabel.
1094 kes Don't free volume if busy in close() -- should help with
1096 ebl Fix #824 RunScript bug (After script could be execute twice)
1097 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1098 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1099 Add a regression script to test RunScript
1101 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1104 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1105 deprecated. No additional bugs will be fixed, and they will be dropped
1106 in a future release (probably 2.4.0).
1107 kes Change name of wx-console to bwx-console to make it more Bacula
1109 kes Change the name of gnome-console to bgnome-console to make it
1112 kes Some time in March, a Feature Request with patch from Jorj Bauer
1113 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1115 The ability for the director to validate a Client (FD) CN against
1116 an arbitrary set of patterns rather than the hostname, with
1117 A new 'TLS Allowed CN' set of directives which are implemented
1118 in the Client resource. Then pattern matching is used in place
1119 of hostname matching against the Certificate's CN. As an example, we
1120 have certificates which (a) use a local CA, and (b) have a CN of the
1122 kes Add new/changed entry points to Win32 build
1123 kes Create unaccepted-projects for projects that are not accepted.
1124 kes Simplify locking in the reservations system.
1125 kes Add more debug code in reservations.
1126 kes Make sure error condition on reserving a volume is handled correctly.
1127 kes Correct handling of volume_in_use.
1128 kes Correct handling of initializing a device.
1129 kes Move handling of broadcasting releasing a device into release_device().
1130 kes Correct attaching dcr to dev so that it is only done if device
1131 is properly initiated.
1133 kes Locking debug level tweaks in SD.
1134 kes Tweak new Volume code.
1136 kes Add exec external-command [wait-seconds] to bconsole. This
1137 executes the external-command. Note! normally external-command
1138 should be enclosed in double quotes.
1139 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1140 it should normally be off in a production system.
1142 kes Implement die command for SD so that we can force it to dump.
1143 kes Implement SD lock debug code.
1144 kes Implement new algorithm for keeping Volume list in SD. It
1145 is now owned by the device.
1147 kes Implement new code for freeing in use volumes that should
1148 resolve if not all, some of the problems of multiple drive
1149 tape conflicts described in bug 801.
1151 kes Fix gui/bacula-web/images files in svn.
1152 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1154 ebl Fix a bug in batch mode (in string escape)
1155 kes Correct migration prune SQL typo that crept in in a
1156 recent 2.1.x change.
1158 kes Move bnet_despool() into class in bsock.c
1159 kes Modify job report to include director name and Build OS.
1160 kes Move drop root privilege and check_catalog() before fork.
1161 kes Add update database scripts (version 9 to 10) to updatedb directory.
1163 ebl Check size and age of each file after its backup to see if
1164 it has changed during backup, if 'checkfilechanges' is set.
1165 The FD will do an extra check (stat(2)) after
1166 each file backup. mtime, ctime and size are compared with
1167 'before backup' information. If time or size mismatch, an
1168 error message will be generated. You must upgrade FD to use it.
1170 kes Make database name and user configurable
1171 --with-db-name=xxx --with-db-user=xxx
1172 kes Add back database type to message.c for debugging.
1174 kes Implement dir_sql() which issues an SQL query.
1175 kes Modify bat medialist to use dir_sql() and do some minor C++
1176 formatting as well as eliminating a number of pointers, simplifing
1179 kes Fix some of the mtx-changer grep commands for tape label readers.
1180 kes Convert a number of bsendmsg into the appropriate send/warning/error
1181 message class calls.
1182 kes Suppress the using database message in the .sql command.
1183 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1185 kes Add context menu for floating a window.
1186 kes Some minor cleanup and name changes in qt-console
1187 kes Add doing mt setblk 0 in Win32 mtx-changer.
1188 kes Apply Martin's bug fix to move definition of ENODATA for
1190 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1191 sqlite2 and sqlite3.
1193 kes More pruning cleanup.
1194 kes Turn on wait_for_drive by default in mtx-changer.
1195 kes Turn on Batch insert code by default as it now passes regression.
1196 kes Add ./configure --enable-bat to enable building of Bat.
1197 No install yet though.
1199 kes Implement a new .sql command for bat.
1200 kes Implement code to turn off pruning in obtaining the next volume.
1201 Pruning is turned off for the status dir command, but turned on
1202 for SD requests and for the list nextvolume command.
1204 kes Correct Qmsg() that was not updated correctly when committing a
1205 previous change (probably the recent TLS patch).
1207 kes Write new subroutine is_volume_purged() that explicitly checks
1208 if the Volume is purged, and if so marks it as such. This should
1209 resolve problems reported about needing to mount twice to recycle
1211 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1212 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1213 amount of duplicated code.
1214 kes Do volume pruning only for the Media Type desired (reduces pruning time
1215 if multiple Media Types are in the same pool).
1216 kes Implement more detailed info in the Job report for the Bacula version
1218 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1220 ebl Add bbatch tool to bench database and insert mode.
1221 Fix sql quote stuff in batch mode
1222 Fix sql stuff for mysql
1224 kes Correct problems with am/pm scheduling. Fixes bug #808.
1225 kes Implement new prunning code that prunes up to 1000 jobs at
1226 the same time. The same technique can be applied to a number
1227 of other prune/purge subroutines.
1228 kes Add an insanity check when starting a new tape job to ensure
1229 that the tape position has not been changed. If so fail the
1231 kes Fix Win32 build for dlls to add the folllowing:
1232 src/lib/bsock.c -- new file with new entry points
1233 src/lib/dlist.c -- new entry points
1234 src/cats/sql_create.c -- new entry point
1235 src/cats/sql_cmds.c -- new DATA item exported
1237 ebl batch mode cleanup bscan-test is ok now.
1238 kes Implement SD code to check length of disk volume before appending.
1240 kes Correct return status on db_batch... routines.
1241 kes Add call to db_write_batch_file_records() to migration code.
1242 ebl Fix AfterJob timing
1243 kes Move the checking of the database in initializion of the Director
1244 to after we drop privileges. This avoids the need for both root
1245 and bacula access to the DB.
1246 kes Correct a misplaced variable definition in src/filed/backup.c
1247 kes Correct how the new batch insert db_create_attributes_record()
1248 uses the arguments. Caused a seg fault in bscan.
1249 kes Implement lock() and unlock() methods in DEVICE class.
1250 Implement block() and set_block(xx) methods in DEVICE class.
1251 kes Modify bnet_connect() so that it uses time() to check for the
1252 wait time expiring (on some OSes, some system calls may not
1253 return immediately).
1254 kes Modify Verify to obtain the previous JobId when it is actually
1255 running rather than at schedule time (as it was in 1.38.x).
1256 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1258 kes When checking pid in pid file, continue running if the pid is
1259 the same as ours. This occurs on IRIX after a system crash.
1262 kes Extend new GUI API.
1263 kes Make the ua structure a class, and implement send_msg(),
1264 error_msg(), warning_msg(), and info_msg().
1266 kes Apply fix from for building wx-console on the Mac from
1268 kes Implement new select mechanism for GUI programs.
1269 kes Reorganize initialization of stackedWidgets in bat.
1271 kes Add updated nagios plugin supplied by Christian Masopust.
1273 kes More bat implementation.
1274 kes File migrate bug with Pool Occupancy using mediaid instead
1275 of jobids. Fixes bug #795.
1276 kes Fix orphaned buffers in filed backup and verify due to
1277 crypto buffers not freed during errors. Fixes bug #789.
1278 kes Extend new GUI api code to tree commands.
1279 kes Ensure that tree and dot commands check console ACLs.
1280 kes Permit marking directory with trailing slash.
1281 kes Allow 20 console connections (instead of only 10).
1283 kes Add smartctl call to bacula-sd.conf as an example of getting
1286 kes Modify jobq.c to let simultaneous restore jobs run. This may
1287 cause them to fail if they cannot get a drive.
1288 kes Add Client Connect Wait to Storage daemon to permit users to
1289 modify the time the SD waits for a FD connection.
1291 kes Correct virtual changer check which was backwards. This caused
1292 volumes to be unloaded into slots already occupied.
1294 kes Apply Command ACL filter to JobId list in restore command.
1295 kes Correct typeo in var.c patch.
1297 kes Don't let Bacula prune File or Job records for the current Job.
1298 kes Fix variable substitution pad + inc bug reported (with patch)
1301 kes Correct SQLite log table index as reported by Luca Berra.
1303 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1305 kes Begin implementing new comm signals for API.
1306 kes Fix a few places in lib/message.c where the open fd may
1308 kes Continue implementing lib/bsock.c (real class). Make jcr,
1309 who, host, and port private. There are new methods to access
1310 them for non-class use. This required touching a number of files.
1312 kes Add LANG=C to autoconf/randpass so it works with languages other
1313 than English. Fixes bug #788.
1315 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1317 You will not be able to generate Include/Exclude list any more.
1318 It will be fixed soon.
1319 If you want to use this, you can apply
1320 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1322 kes Restore of sockets created false error messages because Bacula
1323 no longer restores sockets, but the code was still trying to
1324 set the attributes on a non-existent file. Reported by a user.
1325 ebl finish RecyclePool feature
1326 Media will takes Pool.RecyclePool
1327 when moving from Scratch to a Pool or when user will do
1328 update volume=xxx frompool
1329 To use it, add RecyclePool = aPool to your Pool resource
1332 RecyclePool = Scratch
1336 kes Expand new BSOCK class adding signal() and new BNET signals.
1337 kes Begin enhancing the dot commands adding a new API function
1338 that returns more information and will make it easier
1339 to interface to the Director from a program.
1341 kes Make DEVICE fd private. Its new name is m_fd, and can be
1342 obtained with dev->fd() outside the class. This is the
1343 first of many DEVICE members to be made private.
1344 kes Implement Michael Renner's idea on having a virtual disk
1345 changer. I made some minor modifications (e.g. I did not
1346 implement the Virtual Changer directive, but simply set
1347 the Changer Command to an empty string.
1349 kes Implement a BSOCK send() method that writes the whole record
1350 in a single write() request rather than in two.
1351 ebl add update volume=xxx recyclepool=yyyy
1352 volume takes recyclepool from pool when using update volume=xxx from pool
1354 kes Fix encryption deblocking bug, which caused some restored files
1355 to be truncated. This fixes bug #763.
1356 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1357 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1359 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1360 ebl Use btime_t instead of uint64_t in media patch.
1362 kes Optimize the use of the database a bit in the Status dir command.
1363 Only open it when needed, ensure that if any previous database
1364 was opened, it is closed.
1366 kes Correct VolCatBytes bug from media patch.
1367 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1368 in the case of orphaned records.
1369 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1370 and File records in 300K chunks to be more efficient. This
1371 idea came from Juan Luis Frances (if I remember right).
1372 kes Apply Eric's scratch patch that moves a purged Volume to
1373 the RecyclePool. Question: how is RecyclePool set? what
1374 happens to the ScratchPool?
1375 kes Apply Eric's media patch that collects read/write media
1376 times as well as byte counts. This patch requires a
1377 simultaneous upgrade of the DIR and SD. Note, there
1378 should be some way to turn off timing. I'm not sure
1379 times are in Bacula units.
1380 kes Apply Eric's batch-insert patch.
1382 kes Update projects list.
1384 kes Implement Include/Exclude file lists in FD as dlists using
1385 the new dlistString class. This permits efficiently having
1386 large include/exclude lists and completes project Item 25.
1387 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1388 console is authorized to cancel the job. This fixes bug
1390 kes Modify SD so that the VolCatJobs medium record is updated
1391 at the beginning of a Job rather than the end. This
1392 fixes bug #775 where exceeding MaxVolJobs caused jobs
1394 kes Added a mutex around getting and setting Volume information
1395 so that multiple simultaneous jobs will single thread.
1397 Switch to using Subversion
1398 kes Remove src/pygtk-console/ from configure
1400 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1401 plus the entrypoints.
1402 kes Apply patch supplied that corrects debug print
1403 in canceling jobs for max run time. Supplied as
1404 part of bug #621, which was previously fixed.
1406 kes Test on job_canceled() and sd_msg_thread_done inside
1407 loop starting the message thread to avoid a race condition.
1409 kes Remove rl_catch_signal from console.c as it conflicted
1410 with the header definition. Fixes bug #765.
1411 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1413 kes Clarify some stored/acquire messages to indicate if the
1414 problem is with read or append.
1416 kes Fix memory leak with storage ids in cats/sql_get.c
1417 kes Terminate watchdog earlier to avoid reference to released
1418 memory -- reported by Jason Austin.
1419 kes Move closing the database from jobq.c to the director daemon
1420 termination routine. This fixes memory leaks for shadow jobs
1421 (i.e. migration jobs).
1422 kes Free up the unique jobid chain items in migrate.c. This fixes
1423 a memory leak problem.
1424 kes Convert some ugly looking for statements to use foreach_alist
1425 in findlib/find.c. This will facilitate converting the structures
1426 to use dlist (for large include/exclude lists).
1427 kes Fix a bug in the btree.c and btree.h routines, then rename them
1428 rblist and add them to be built in src/lib. Include some new
1429 methods written by Rudolf Cejka that make the code more readable
1430 (hides some of the ugly casting).
1431 kes Add set_next() and set_prev() methods which make the code much more
1432 readable. Also add a new dlistString class that facilitates storing
1433 strings in dlists. To be used in the large include/exclude lists.
1434 kes Make some trivial modifications to lib/tree.h that use rblist
1435 rather than dlist for storing the tree links. This was suggested
1436 by Rudolf Cejka. The result of this is that the restore tree now
1437 uses red-black binary trees rather than simple linked lists. This
1438 should give rather dramatic speed improvements for directories
1439 contining large numbers of directories/files (more than 10000).
1441 kes Fix maxruntime bug #621.
1443 ebl Implement the include JobID in spool file name project.
1444 kes Reorder projects file in order determined by Jan 2007 vote.
1445 kes Implement item #12 on project list -- quick release of FD by
1447 kes Fix open of SQLite3 db where user does not have write permission
1448 so that DIR does not crash. Fixes bug #761.
1450 kes Add back missing @ in Win32 Makefile.
1451 kes Change 'Device not configured to autolabel' from INFO
1453 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1454 which should restart an indefinite # of times.
1455 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1456 other DIR specifications.
1458 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1459 Fix path quoting in SQLite scripts.
1460 Fix problems with SHGetFolderPath.
1462 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1464 kes Fix Job restart on error bug that promotes an Inc to a Full
1465 backup. This should fix bug #755.
1466 kes Add qt-console and first cut of code.
1470 kes Fix Bacula->Documentation link on Win32 to point to index.html
1471 instead of bacula.html. Fixed bug #750.
1472 kes Return JobId in db_get_job_record() when JobId==0. This should
1474 kes Do not release source pointers when restarting a failed job.
1476 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1477 This *should* fix bug #747.
1478 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1481 kes Modify USTORE constructor to set an empty store_source string,
1482 and don't copy the store_source string in a cancel. Hopefully
1483 this will fix Arno's seg fault, bug #744.
1484 kes Add back code to disable conio in configure. Fixes bug #743.
1485 kes Correct the Options scanner in the FD to correctly handle
1486 SHA1 option, which was eating the next option. Reported by
1488 kes Add code to indicate when the SD is spooling, spool wait, and
1489 despooling as requested by Alan Brown.
1491 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob