1 Technical notes on version 2.2
5 kes This patch should ensure that queued messages to the console are
6 displayed as soon as possible. It should fix bug 1007, but has been
9 kes This patch fixes the infinite loop when trying to increase the
10 maximum number of volumes in a Pool during the add command.
11 This patch fixes bug #1008.
15 kes Get fix for joblist bug in bat from trunk.
17 kes This patch fixes bug #1003 where putting the message output from
18 a Verify job into the catalog results in a recursive loop. The problem
19 seems to show up only with postgresql (to be verified).
21 kes Fix bug #942 where lots of emails where generated when the heartbeat
22 interval was low and Bacula wanted a different tape from the one in
25 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
26 which was updated during a restore (or a reading migration) bug #982
28 ebl Use qmake-qt4 instead of qmake when available (debian system).
30 kes Add a security warning to src/cats/make_catalog_backup.in indicating
31 that passing the password via the command line (arg 3) is insecure.
32 This responds to bug #990 (it doesn't fix it).
33 kes Apply 2.2.5-postgresql-errors.patch
34 kes Remove unneeded File table index on JobId, which is already
35 present as the first index of another multi-index.
37 kes Set default debug_level to zero. This corrects bugs #991 and #993.
38 kes Fix a crash in bat when it cannot connect to the Director for example
39 if the Director is not running.
41 kes Activate Close button on tray-monitor window. This fixes
44 kes Fix spurious warning message printed when creating a volume with
45 a LabelFormat. This fixes bug #976.
49 kes Add JobId in place of Job name in all the Jmsg() output.
50 kes Correct the APP_DESC for the Win32 storage service (remove an e).
52 kes Add new SD despooling attributes and Dir inserting attributes
53 job status codes. This fixes bug #961.
54 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
56 kes Fix doc issue. This fixes bug #963.
57 kes Fix listing performance problems in bat. Pointed out by
59 ebl Fix replace on restore. This fixes bug #969
60 kes Fix bat code that tests for Win32. This should fix bug #968
61 kes Query 5 list wrong Vol after migration. This fixes bug #960
63 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
64 in back porting from 2.3.x
66 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
67 The details are included in the notes in this file.
69 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
70 messages; it fixes a problem opening the SQLite3 database when multiple
71 simultaneous jobs were running; it fixes a bug with certain versions of
72 MySQL where batch inserts failed because of table name character case
73 (upper/lower) differences.
74 kes Fix race condition that drops final block written to volume.
75 This happens in rare cases with multiple simultaneous jobs
76 when the Volume fills. This fixes bug #964. May be related
77 to bug #935 and possibly #903.
79 kes Fix FD->SD authorization failure, which was due to spurious
80 wakeups from a pthread_cond_timedwait(). Simply check the
81 predicate before continuing. This fixes bug #953
82 dvl Add new configuration item --archivedir
83 dvl Adjust regression tests to use tmp not /tmp. This will allow
84 multiple concurrent runs of the regression tests.
86 kes Eliminate more strerror() and replace with bstrerror().
87 kes Remove BSD getopt and replace with unrestricted IBM version.
88 kes Fix Win32 build for changed calling sequences.
90 kes Fix FD->SD authorization failure, which was due to spurious
91 wakeups from a pthread_cond_timedwait(). Simply check the
92 predicate before continuing. This fixes bug #953.
93 kes Add const char where needed (more to do).
95 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
96 kes Don't overwrite error message in check_tables_version.
98 kes Unlock batch insert tables with same calls used elsewhere.
99 kes Allow starting 59 jobs a second.
100 kes Make SD session key more random.
101 kes Add retry for SQLite opening db if it fails. Probably helps
103 kes Suppress extra error messages during batch insert failure.
105 kes Put some FD auth code on dbglvl rather than fixed.
106 kes Return insert attributes error message in db msg buffer to avoid
107 false error messages. Helps fix bug #966.
108 kes Separate batch init error messages. Probably helps fix bug #966.
109 kes If Dir gets an error during inserting attributes, cancel SD.
110 This reduces unnecessary error messages.
112 ebl Cleanup batch insert code. Probably fixes bug #965.
114 kes Turn off some code when batch insert not enabled.
115 kes Edit FD name in connect error messages.
117 kes Add code to handle tray monitor separated from Win32 FD.
118 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
120 kes Fix ANSI tape labeling. This fixes bug #954.
121 kes Increase the max block size to 4MB fixes bug #957.
122 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
123 is not properly mounted (recognized) during a poll.
124 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
125 Job that has differences reports Verify OK.
126 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
128 Release Version 2.2.4
130 kes Increase size of name string when FD making connection to SD.
133 kes Add waits to multiple exit detection code to try to force pid
134 file to always be deleted.
135 kes Restore good dev.tar.gz to rescue set appropriate binary property.
137 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
138 trying to switch drives by checking for blocking before unblocking.
140 kes Cancel storage daemon in all cases where FD reports error. This
141 should fix virtually all cases of bug #920.
143 kes Fix error message that was clobbered when Dir tells SD it does not
144 have write permission on Volume. This should fix a minor point
145 in bug #942, but not the main problem.
146 kes Add code to cancel job in SD if FD connection fails. This should
148 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
149 kes Fix migration code to get correct Volume name with multiple volumes
150 by skipping |. Fixes bug #936.
151 kes Implement patch supplied by Landon to fix bug #944 where using
152 TLS with bconsole uses 99+% of the CPU.
153 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
155 kes Move patches into patches directory.
157 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
160 ebl Using "m" in bconsole will show messages like before,
161 and not memory usage.
163 Release Version 2.2.3
164 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
167 kes Fix bug #935, and probably also bug #903 where files were not
168 restored. MediaId was not properly set in JobMedia record after
171 kes Add ./configure search in qwt-qt4 for qwt package
172 kes Apply Martin Simmons patch that should turn off the new API usage
173 when batch insert is turned off allowing building on older
176 Release Version 2.2.2
178 ebl Detect if new PosgreSQL batch insert API is present.
179 kes Correct incorrect mempool call causing Director crash.
180 sb Update spec files for 2.2.1 release
182 Release Version 2.2.1
184 kes Update POTFILES.in
185 kes Cleanup a few underquoted AC_DEFUNs in configure
186 kes Apply patch from Martin Simmons that adds a test for va_copy to
189 kes Fix bug #921 by increasing the number of tries to create a new volume
191 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
192 can be called multiple times. Implement a version for machines
193 without va_copy() that gets a big buffer.
195 kes Integrate more portable zone offset code into bsmtp.c
196 Submitted by Attila Fülöp.
198 kes Fix bad SD->FD return status reported by
199 (James Harper) <james.harper@bendigoit.com.au>
200 ebl Fix a bug in read_close_session which return random status
201 thanks to James Harper
203 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
204 and directory names during restore of single file/directories.
205 kes Add sanity checks to .sql command when string is empty. Hopefully
206 that will resolve Dirks Director crash.
208 kes Apply patch submitted by Martin Simmons that corrects a seg fault
209 in the bsmtp chat subroutine when debug is >= 10.
211 kes Fix Director crash when running bat SQL queries.
212 kes Add David's notes on Item 8: Copy pools.
214 kes Rework projects file to be current and ready for a vote.
215 kes Enhance lex scanner error message.
217 kes Tweak LICENSE file to mention BSD code.
218 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
219 if specified on the ./configure.
220 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
221 This class is intended to allow us to open a second bsock to the
222 Director while in the restore subdialog.
224 kes Fix configure to create bat Makefile before creating dependencies.
225 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
226 kes Add a tooltip to the tray monitor.
227 dvl Set the Director's PID file before dropping privs. This fixes
230 kes Update AUTHORs file
231 kes Increase the default max concurrent jobs to 20 in FD and SD to
232 correspond with the default .conf files.
233 kes Rewrite the Win32 service routines. This eliminates the 3 copies
234 some different, of the same file created by RN when porting the
236 kes Rearrange some of the Win32 directories and the placement of the files
238 kes Set DEVELOPER flag in version.h
240 ========================================================================
241 Release Version 2.2.0
243 kes Apply a second doc patch from Marc.
244 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
245 improves the tips section that discusses how to setup multiple
248 kes Update bat README file.
249 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
250 corrects a typo in the Recycle status check in db_find_next_volume().
251 This will probably fix a number of annoying problems with multiple
253 kes Modify most of dird/msgchan.c to use bsock class calls rather than
254 bnet calls -- no functionality change.
256 kes Modify the Verify output to specify if files are missing on
257 the Volume(s) or disk. Fixes confusion in bug #916.
258 kes When more than one Volume is read in a migration job, the last
259 Volume bytes reported are from the last read volume rather than
260 the last written volume. Fixed. This fixes bug #910.
261 kes Fix display of Recycle flag after update volume=foo recycle=yes.
262 It previously printed New Recyle flag is: no. This fixes bug
265 kes Correct seg fault when switching tape drives during restore.
266 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
267 be used until after 2.2.0 release.
269 kes Remove fnmatch() in SD that permitted wild card specifications.
272 kes Fix %g in filename returned by SQL for browse tree reported by
274 kes Fix configure so that it puts config.out in the cwd rather than
276 kes Attempt to fix the locking problem reported by Eric in bug #906.
277 kes Make berrno class to leave errno unchanged after constructor call.
278 kes Make bnet_server use the heap rather than the stack to allocate
279 its socket fd pointers to avoid a crash at termination. Problem
280 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
282 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
283 and putting it in depkgs-qt along with Qt4.3.
285 kes Rework code in acquire.c that switches drives for reading when
286 the Media Type does not match. This should fix bug #906
288 ebl Fix a director segfault during job setup #907
289 kes Correct seg fault in postgresql when first operation returns no
290 rows. Fixes Dirks File browser problem seg fault with bat.
292 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
293 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
296 kes Implement PopUp YES/NO dialog for bat.
298 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
300 kes Correct RunScript to terminate job in FD on failure.
301 kes Change abort_on_error and AbortJobOnError to fail_on_error
302 and FailJobOnError in RunScripts.
303 kes Minor tweaks of code formating in RunScripts, principally to
304 avoid depassing 80 columns.
306 kes Eliminate one #ifdef Win32 in bsmtp
307 kes Implement grow tool to grow a file for testing very large databases.
308 kes Add big-vol-test to test Bacula seeking with > 5GB.
311 kes Modify find_next_volume() to return all values in Media record.
312 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
316 kes Update Release notes
318 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
319 Warning, in previous beta version, all media get from scratch keep their
322 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
323 This should fix bug #842. Made a note to look at removing the temp
324 files at the end of the install.
325 kes Add ability to mount and unmount a file device providing it is
326 marked as being removable and has the appropriate mount and unmount
327 commands defined in the Device resource. This fixes bug #830.
328 kes When applying a storage override, release all previous storage
329 definitions rather than just prepending the new storage.
330 This should prevent a good deal of confusion.
332 kes Implement ./configure search for qwt libraries.
334 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
335 Win32 FD. This should fix bug #893.
336 kes Remove an unnecessary beep in Win32 init code.
337 kes Update copyright dates in Win32 executable about boxes.
338 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
339 code with a BSD getopt.c and getopt.h.
340 kes Remove sched.h from the Win32 compat directory -- not used.
341 kes Remove the Exit menu item from the Win32 tray monitor. If you really
342 need to shut it down, do it through the services panel or the command
344 kes Remove some inappropriate Bacula FSFE copyrights.
345 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
346 kes Fix regress config non-portable test as pointed out by
347 Florian Heigl <florian.heigl@gmail.com>
348 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
349 as pointed out by Florian Heigl <florian.heigl@gmail.com>
351 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
352 Reported by Frank Sweetser.
356 kes Fix client-only build.
357 kes Integrate client-only fixes for bsys (initgroups) and conio from
358 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
359 kes Make arguments to get_scratch_volume() in same order as other
361 kes Rework the prune_volumes() subroutine so that after purging and
362 no volume found in desired pool, it will check for a scratch
363 volume. This prevents recycling the whole scratch pool.
364 kes Add code to status storage to print boffset_t (largefile support).
366 kes Move qwt (Graphics libarary for Qt4) to depkgs.
367 kes You now need a --with-qwt=<dir> to be able to build bat.
368 kes Update src/win32/cats/bacula_cats.def to include the new
369 db_get_query_dbids() call on Win32.
371 kes Correct a problem when selecting a scratch volume and moving
372 it to another pool that lost some columns.
373 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
374 kes Enhance Autochanger error messages to include Volume and device name.
375 kes Rework prune_volumes() code to take account of InChanger flag,
376 and to handle recycling volumes going to the Scratch pool and
377 current pool because the RecyclePool directive.
378 kes Implement a better and more efficient db_get_query_dbids() to
379 handle creating and passing back a list of DBIds.
383 kes Start work on new more efficient DBId subroutine. First use
384 will be for recycling volume to Scratch inchanger.
385 kes Increase number of JobIds in pruning from 1000 to 10000.
386 This to be replaced by above routine.
387 kes Begin implementation of building Qt4 on Win32.
388 kes Correct typo in fix I added for bad TLS shutdown.
389 kes Pull 2.0.3 patches into patches directory.
390 kes Update Release notes. Include qt-console in line count.
391 kes Update Projects file.
393 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
394 bug in migration code where a job that spanned two volumes
397 kes Implement new BST_DESPOOLING blocked state. Change from locking
398 during despooling in SD to blocking. This means that other threads
399 can work with the device structure, in particular the reservations
400 system while despooling.
402 kes Fix return in reservation message queue that missed clearing
403 the jcr lock (implemented 26Jun07 below).
404 kes Rename a number of dev methods to make locking function names
406 kes Document locking in lock.c. Move lock structures to new file
409 kes Move reservations message lock to lock jcr only this
411 kes Move main SD locking code into lock.c (new file).
412 kes Update Win32 build to include lock.c
416 kes Dirk committed the qwt library code for drawing graphs in bat.
417 kes Tweak install of qwt so that it is integrated with ./configure.
419 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
420 out by Eric (my typo).
421 ebl Fix configure.in to get batch mode enable
422 kes Return correct string from authenticate.cpp in bat when connecting
424 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
425 spurious line drops when using TLS.
426 kes Do not file reparse points when restoring a file that already
429 kes Implement Windows reparse points -- similar to directories, but
430 we do not descend into it. This is a first cut. They seem to
431 be backed up, but restore is not yet tested.
432 kes Remove restore_blocking in tls code when shutting a socket to leave
433 it in blocking mode. Hopefully this will fix the encryption bug
434 reported by Frank Sweetser.
435 kes When opening a file for backup, tell the OS that we are going to
436 read it sequentially -- optimization.
437 kes Change variable names in authenticate_director() to not conflict
438 with member names in bat. Caused great confusion with compiler,
441 kes Queue openssl error messages in case of comm problem.
442 kes Do shutdown() call if socket terminated.
443 kes Remove some duplicated code in tls.c
444 kes Move more of the bsock member variables into private and access
446 kes Add Frank Sweetser's tls-test to the regression suite.
448 kes Add Swedish sv.po file
450 kes Don't print clock skew message in FD if less than 3 seconds diff.
451 kes Add a bit of VSS info to status client.
452 kes Implement a first cut of Vista VSS, using Win2003 code.
456 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
457 loaded tape but uses first drive).
458 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
459 This was indeed a Win32 issue.
461 kes Simplify search of autochanger for in-use Volume.
462 kes Fix exit condition of check for in-use volume. kes Remove
463 inappropriate my_postgresql_free_result() in db_close()
465 kes Fix bad return in FD when encryption signature not found.
466 Probably caused a crash.
467 kes Inhibit missing encryption signature error messages for
468 file types where no signature computed.
469 kes Correct inverted check on autochanger in reservation system.
470 kes Tweak debug code in autochanger reservation.
472 kes Add some additional locking in the cats directory in subroutines
473 that modify packet variables called from batch insert.
474 kes Rework how dcrs are allocated. new_dcr() can now be called
475 with an existing pointer, and it will simply clean it up.
476 This allows the reservation system to test various different
477 devices, and will permit easy device changes.
478 kes A bunch of changes all over to handle new new_dcr() calling
480 kes Work more on the Volume management in the SD. Remember Volumes
481 for tape drives and for autochangers (even virtual disk changers).
482 kes When looking at the Volume list to reserve a drive, handle
483 autochanger names correctly by interating through the changer
484 devices. Also call the Director to see if a Volume is suitable
486 kes Fix some bugs in bscan. Make sure all media records are written.
487 Make sure that valid JobMedia records are written for disk files.
488 Previously they were completely wrong.
489 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
490 that the URLs don't change and so that the developers will all
491 work off the same copy. Rebuild from scrach.
492 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
496 kes Fix seg fault in FD from incorrect digest size.
497 kes Fix argument to non-OpenSSL crypto.c subroutine.
501 kes Remove a few malloc()s from the encryption code.
502 kes Use the class calls to bsock in filed/backup.c and restore.c in
503 place of the old bnet_xxx code.
504 kes Implement code that does an on the fly calculation of the
505 signing digest during restore of encrypted files. It makes
506 a best guess at the algorithm, and if it is not correct, will
507 then revert to the old code which reads the file after it is
509 kes Implement at least one missing crypto stream in stream_to_ascii()
510 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
511 #877 where a reload with bad syntax causes Dir to exit.
513 Cut: 2.1.14 beta (not released)
515 kes Do not free a volume on a tape drive until another volume is
516 mounted and read, or the autochanger unloads the volume.
517 This should help the SD re-use volumes that are already mounted,
518 and should fix bug #886.
519 kes Apply patch from user brettedgar that allows gnome2-console include
520 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
521 kes Apply patch from Lucien Weller that fixes day of week calculation
522 because of DST flag problem. Fixes bug #887.
524 kes Move find_next_appendable_volume() to after acquiring a valid device
525 in reserve.c. This fixes bug #864 -- confirmed by reporter.
527 kes Unable to reproduce bug 872. However added additional testing for
529 kes Bug #874 resolved by documenting SQLite limitations.
530 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
531 kes Bug #881 resolved by removing typo in mtx-changer script.
532 kes Made Frank Sweetser's wiki the official Bacula wiki with his
533 approval. Added a link to the wiki on the web page, and implemented
534 a backup from http://paramount.ind.wpi.edu
536 kes Fix update allfrompool to pass pool name.
538 kes Convert to pure GPL v2 license.
539 kes Fix sscanf problems reported by Peter Buschman that caused
540 a bus error on Solaris.
541 kes Rework (simplify) the select prompt in bat.
542 kes Move get_jobid_from_tid() into lib and create a
544 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
545 should definitely fix the problem of lost error messages in the
547 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
548 kes Eliminate tcpd.h from the project. Enclose the #include from the
549 library with extern C ...
550 kes Add print of signal name when a signal is trapped.
554 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
556 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
557 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
558 makes SQLit3 run 30 times faster, though a bit less safe.
559 kes Implement --with-batch-insert in configure and detection of thread
560 safe libraries. It is on by default, but turned off if no thread
561 safe library (e.g. SQLite 2) is available.
563 kes Fix Bacula PostgreSQL buffer overruns.
564 kes Do better checking for NULL results returned from PostgreSQL;
565 implement retry for failed queries; clear results buffer after
566 failed query. Hopefully this will correct the PostgreSQL failures.
568 kes Implement algorithm to handle only one appendable volume with
569 Prefer Mounted Volumes = no.
570 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
571 returned from a query.
572 kes Make volume lock recursive.
573 kes Implement an additional volume reservation algorithm that
574 starts by considering all reserved volumes then uses the
575 old brute force algorithm of searching the resources to
576 find a suitable device.
577 kes Add new reservations debug code and refine the old code.
578 kes Update the win32/dll/bacula.defs file.
580 kes Tweak reservations algorithm to permit a few more cases, i.e.
581 volume reserved, but on different drive, ...
582 kes Enhance SD status to include Pool and Media Type for drive in a
583 more readable format (a bit longer).
584 kes Fix PostgreSQL double free.
586 kes Minor refactoring of restore decryption code.
587 kes Add code to smartall.c to detect double free of a buffer.
589 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
590 so that bsmtp will create a correct email address (mailbox only).
591 kes Modify 'memory' command so that the buffers are listed as 'In use'
592 to avoid confusion with Orphaned buffers.
593 kes I reworked the OpenSSL include/lib flags to be handled in
594 the standard Bacula way, which should fix bug #863 concerning
595 non-standard OpenSSL libraries.
597 kes Implement Help Browser window for bat.
598 kes Fix reload bug that reset StorageId to zero.
600 kes Fix TLS #ifdefing when TLS turned off.
601 kes Ensure that when labelling a tape with Slot=0 that InChanger
603 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
605 kes Add StartTime to final uar_sel_jobid_temp query so that we can
606 add DISTINCT (required by PostgreSQL).
607 kes Implement BSOCK authenticate_director() method. Eventually will
608 authenicate all daemons.
609 kes Move several more functions into the BSOCK class.
611 kes Add code to tell the OS that we no longer need a cached
612 file that we were reading. In findlib/bfile.c. Also,
613 only cache files that we are reading. Thanks to
614 Tobias Oetiker <tobi@oetiker.ch> for the idea.
615 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
616 kes Implement script to automatically generate cats and dll .def
618 kes Update README.mingw32 to include new .def file generation.
619 kes Correct typo in UTF-8 error message as reported by:
620 jhernandez <julianhernandez@gmail.com>
621 kes Add additional sm_check() code on debug level 1.
622 kes Set default debug level to 1.
623 kes Trap SIGABRT in attempt to get traceback.
625 kes Reduce bat connect timeout from 30 to 15 seconds.
626 kes More restructuring and implementing BSOCK class in place of
628 kes Remove a few unnecessary malloc() tests in crypto code.
629 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
630 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
631 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
633 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
635 kes Fix Verify InitCatalog. The attributes were not pointing to the
636 correct saved location.
637 kes Implement message callback so that GUI is sure to get all
638 daemon messages. Currently displayed in a dialog in bat.
639 kes Ignore SIGUSR2 (Bacula timer) in bat.
640 kes Apply regress patch from bug #859 to allow regress to work
641 with Solaris compiler.
643 kes Begin adding TLS support to bat.
644 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
645 clean up lex.c and make it more readable.
647 kes Move more bnet functions into the BSOCK class.
648 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
649 kes Complete change of berrno strerror() method to bstrerror()
653 kes Cleanup incorrect email addresses in bsmtp.
654 kes Make bat display initial messages rather than discard them.
656 kes First cut of adding .mod to the run command.
657 kes Implement auto display of messages in bat.
658 kes Enhanced preferences to allow all Bacula output to be
661 kes Try to make bsmtp date routines more generic.
662 kes Fixed bug #856 autochanger documentation.
663 kes Rework bsmtp date editing for Win32. This fixes bug #854.
664 kes Add new cats entry point so Win32 builds.
666 kes Attempt to fix bsmtp date editing on OSes without %z editing.
668 kes Do better checking for the MySQL 64 bit libraries looking for both
669 .a and .so libraries.
670 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
671 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
672 kes Require the thread safe version of MySQL during configure. Thanks
673 to Andre Noll for pointing this out.
674 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
675 continuing in migration code.
676 kes Apply implementation of tray-monitor font derived from gnome-console
677 submitted by Andreas Piesk <a.piesk@gmx.net>
679 kes Eliminate important memory loss in SQLite
680 kes Fixed the batch insert MySQL thread specific data that was not
681 being freed. See cats/mysql.c:db_thread_cleanup().
682 kes Fix restore before command.
683 kes Convert old hdr.name to name() in a few places.
684 kes Implement update jobid command.
685 kes Return all time_t dates in db_get_job_record()
686 kes Stop watchdog in SD earlier.
687 kes Put Pool just after Storage in please mount message.
688 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
691 kes Update the po files.
692 kes Fix Verify InitCatalog by making it cache attributes.
694 kes Change name bacula-bat to bat for man 1 page to correspond to
696 kes Check for client and store NULL pointers in status command. This
698 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
699 kes Fix sign extended editing of %p.
700 kes Clean out a little old #ifdefing in cats/mysql.c
702 kes If time diff between DIR and FD is more than 600 seconds convert
703 INFO message to WARNING.
704 kes Implement heap size display in status for all daemons.
705 kes Attempt to fix MySQL db open memory loss (not successfull).
706 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
707 kes Eliminate memory loss in MySQL (possibly other SQLs) during
708 Query. This looks like a MySQL but but by doing extra releases,
709 the memory goes away. This should fix bug #847.
711 kes When backup fails, cancel SD before waiting for sd termination.
712 kes If SD is waiting for FD to connect during cancel, wake up the
714 kes Fix fsf code so that errno is correctly reported.
715 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
717 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
718 so that Bacula doesn't later stumble into a seg fault.
719 kes Use the term Restore Client in the restore Job report.
720 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
721 the original job's FileSetId.
722 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
723 spooling in migration jobs. Not yet tested.
724 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
725 reading conf file from a pipe. However, do it with open_bpipe()
726 rather than popen. Not yet tested.
728 kes Fix an ugly bug where the VolCatBytes were getting updated
730 kes Implement bconsole memory command that prints current memory
731 usage, plus smartalloc dump.
732 kes Clarify some error messages in backup, admin, and migrate.
733 kes Shrink label dialog to smaller size.
734 kes Invert Cancel OK buttons on restore to be OK Cancel.
735 kes More strerror() to bstrerror() conversions.
737 kes Start implementing bstrerror() in place of strerror().
738 kes Stripping path -- seems to work.
740 kes Prevent door and port files from being restored (mostly
742 kes Free an unreleased buffer in compat code.
743 kes Change console Job name from *Console* to -Console- to eliminate
744 Win32 filename problems. Put Win32 path separator when creating
745 Console file. This fixes bug #846.
746 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
748 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
750 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
751 to force Win32 error message.
753 kes First cut strip path. The data should be passed to the FD,
754 but nothing is done with it yet.
755 kes Enhance the digest and signature routines in the crypto
756 library to accept a JCR and to use it to print error messages
757 so that they will go in the Job report rather than the daemon's
759 kes Simplify some of the verify signature code.
760 kes Simplify a few of the alternative returns in the signature
763 ebl Use only POSIX regex instead of GNU regex in breg.c for
764 File relocation. It fix broken freebsd compilation.
765 kes Convert all other Dir files to use new ua class message
767 kes Tentative fix for missing digest signature in bug 807.
768 kes Correct handle problem in new win32_ftruncate routine.
769 kes Convert ua_purge.c and ua_update.c to use new ua class
770 message routines for bat.
772 kes Correct incorrect installation of LICENSE in Win32 installer.
773 kes Display LICENSE at the beginning of the Win32 install.
774 kes Attempt to correct the need for the png files to be installed
776 kes Reapply my bat.conf install script in qt-console. I think I
777 editted bat.pro instead of bat.pro.in and it was lost.
778 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
779 the /var/lock/subsys for subsysdir. Also corrects typos in the
782 kes First cut update job.
783 kes Correct configure to include qmake of src/qt-console directory.
785 kes Make restore job yes/mod/no print in one command so GUI works.
786 kes First cut implementing backup and restore client.
787 kes Correct editing in Verify output that caused a seg fault.
789 kes Insure that bat.conf is not overwritten during installation.
790 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
791 while I was implementing migration in March 2006 !
793 ebl Cleanup file relocation, using char *RegexWhere instead of
794 char *where + bool where_use_regexp
795 kes Update some manpages and add bat manpage.
796 kes Make a first cut at converting bacula.spec.in for bwx-console
798 kes Apply patch from John Goerzen to add hostname as fourth argument
799 to make_catalog_backup script.
800 kes Fix typos I introduced into bsmtp.c
801 kes Make pm_strxxx() routines handle input of NULL pointer. This
802 is to protect from NULL pointers returned from SQL databases.
803 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
804 kes Add more debug to FIFO code -- fix fifo regression test.
806 kes Implement posix_fadvise in FD, and for reading spool files in SD.
807 kes Add thread timer to bnet_connect() to break from OS if wait time
810 kes Update Win32 build to include new files, new symbols, and
812 kes Implement socket level heartbeat (tcp_keepidle)
813 ebl Commit File relocation patch
814 kes Make bat have 'make install' target.
815 kes Warn during install if old gnome-console binary found.
816 kes Warn during install if old wx-console binary found.
817 kes Add -8 option to bsmtp command line to add content type utf-8.
818 Fixes bug #809. (Character coding problem in bsmtp).
819 kes If < is found in target (from, to, cc) then do not enclose the
820 target in < > in bsmtp. Fixes bug #772 (malformed address).
821 kes When printing certain items in dbcheck, stop after 300000.
822 Fixes bug #822. (dbcheck loops).
823 kes Incorrect status in Dir after waiting for mount with poll set.
826 kes Extend idea of Prefer Mounted Volumes to mean a volume about
828 kes Print waiting to reserve a device every 5 mins.
830 kes Don't call close_part in label.c if tape and relabel.
831 kes Don't free volume if busy in close() -- should help with
833 ebl Fix #824 RunScript bug (After script could be execute twice)
834 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
835 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
836 Add a regression script to test RunScript
838 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
841 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
842 deprecated. No additional bugs will be fixed, and they will be dropped
843 in a future release (probably 2.4.0).
844 kes Change name of wx-console to bwx-console to make it more Bacula
846 kes Change the name of gnome-console to bgnome-console to make it
849 kes Some time in March, a Feature Request with patch from Jorj Bauer
850 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
852 The ability for the director to validate a Client (FD) CN against
853 an arbitrary set of patterns rather than the hostname, with
854 A new 'TLS Allowed CN' set of directives which are implemented
855 in the Client resource. Then pattern matching is used in place
856 of hostname matching against the Certificate's CN. As an example, we
857 have certificates which (a) use a local CA, and (b) have a CN of the
859 kes Add new/changed entry points to Win32 build
860 kes Create unaccepted-projects for projects that are not accepted.
861 kes Simplify locking in the reservations system.
862 kes Add more debug code in reservations.
863 kes Make sure error condition on reserving a volume is handled correctly.
864 kes Correct handling of volume_in_use.
865 kes Correct handling of initializing a device.
866 kes Move handling of broadcasting releasing a device into release_device().
867 kes Correct attaching dcr to dev so that it is only done if device
868 is properly initiated.
870 kes Locking debug level tweaks in SD.
871 kes Tweak new Volume code.
873 kes Add exec external-command [wait-seconds] to bconsole. This
874 executes the external-command. Note! normally external-command
875 should be enclosed in double quotes.
876 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
877 it should normally be off in a production system.
879 kes Implement die command for SD so that we can force it to dump.
880 kes Implement SD lock debug code.
881 kes Implement new algorithm for keeping Volume list in SD. It
882 is now owned by the device.
884 kes Implement new code for freeing in use volumes that should
885 resolve if not all, some of the problems of multiple drive
886 tape conflicts described in bug 801.
888 kes Fix gui/bacula-web/images files in svn.
889 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
891 ebl Fix a bug in batch mode (in string escape)
892 kes Correct migration prune SQL typo that crept in in a
895 kes Move bnet_despool() into class in bsock.c
896 kes Modify job report to include director name and Build OS.
897 kes Move drop root privilege and check_catalog() before fork.
898 kes Add update database scripts (version 9 to 10) to updatedb directory.
900 ebl Check size and age of each file after its backup to see if
901 it has changed during backup, if 'checkfilechanges' is set.
902 The FD will do an extra check (stat(2)) after
903 each file backup. mtime, ctime and size are compared with
904 'before backup' information. If time or size mismatch, an
905 error message will be generated. You must upgrade FD to use it.
907 kes Make database name and user configurable
908 --with-db-name=xxx --with-db-user=xxx
909 kes Add back database type to message.c for debugging.
911 kes Implement dir_sql() which issues an SQL query.
912 kes Modify bat medialist to use dir_sql() and do some minor C++
913 formatting as well as eliminating a number of pointers, simplifing
916 kes Fix some of the mtx-changer grep commands for tape label readers.
917 kes Convert a number of bsendmsg into the appropriate send/warning/error
919 kes Suppress the using database message in the .sql command.
920 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
922 kes Add context menu for floating a window.
923 kes Some minor cleanup and name changes in qt-console
924 kes Add doing mt setblk 0 in Win32 mtx-changer.
925 kes Apply Martin's bug fix to move definition of ENODATA for
927 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
930 kes More pruning cleanup.
931 kes Turn on wait_for_drive by default in mtx-changer.
932 kes Turn on Batch insert code by default as it now passes regression.
933 kes Add ./configure --enable-bat to enable building of Bat.
934 No install yet though.
936 kes Implement a new .sql command for bat.
937 kes Implement code to turn off pruning in obtaining the next volume.
938 Pruning is turned off for the status dir command, but turned on
939 for SD requests and for the list nextvolume command.
941 kes Correct Qmsg() that was not updated correctly when committing a
942 previous change (probably the recent TLS patch).
944 kes Write new subroutine is_volume_purged() that explicitly checks
945 if the Volume is purged, and if so marks it as such. This should
946 resolve problems reported about needing to mount twice to recycle
948 kes Rewrite pruning algorithm to do more work in the SQL engine, and
949 to pass a list of JobIds to be deleted to SQL. Also, minimize the
950 amount of duplicated code.
951 kes Do volume pruning only for the Media Type desired (reduces pruning time
952 if multiple Media Types are in the same pool).
953 kes Implement more detailed info in the Job report for the Bacula version
955 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
957 ebl Add bbatch tool to bench database and insert mode.
958 Fix sql quote stuff in batch mode
959 Fix sql stuff for mysql
961 kes Correct problems with am/pm scheduling. Fixes bug #808.
962 kes Implement new prunning code that prunes up to 1000 jobs at
963 the same time. The same technique can be applied to a number
964 of other prune/purge subroutines.
965 kes Add an insanity check when starting a new tape job to ensure
966 that the tape position has not been changed. If so fail the
968 kes Fix Win32 build for dlls to add the folllowing:
969 src/lib/bsock.c -- new file with new entry points
970 src/lib/dlist.c -- new entry points
971 src/cats/sql_create.c -- new entry point
972 src/cats/sql_cmds.c -- new DATA item exported
974 ebl batch mode cleanup bscan-test is ok now.
975 kes Implement SD code to check length of disk volume before appending.
977 kes Correct return status on db_batch... routines.
978 kes Add call to db_write_batch_file_records() to migration code.
979 ebl Fix AfterJob timing
980 kes Move the checking of the database in initializion of the Director
981 to after we drop privileges. This avoids the need for both root
982 and bacula access to the DB.
983 kes Correct a misplaced variable definition in src/filed/backup.c
984 kes Correct how the new batch insert db_create_attributes_record()
985 uses the arguments. Caused a seg fault in bscan.
986 kes Implement lock() and unlock() methods in DEVICE class.
987 Implement block() and set_block(xx) methods in DEVICE class.
988 kes Modify bnet_connect() so that it uses time() to check for the
989 wait time expiring (on some OSes, some system calls may not
991 kes Modify Verify to obtain the previous JobId when it is actually
992 running rather than at schedule time (as it was in 1.38.x).
993 kes Fix src/job.c to handle MaxWaitTime correctly. This should
995 kes When checking pid in pid file, continue running if the pid is
996 the same as ours. This occurs on IRIX after a system crash.
999 kes Extend new GUI API.
1000 kes Make the ua structure a class, and implement send_msg(),
1001 error_msg(), warning_msg(), and info_msg().
1003 kes Apply fix from for building wx-console on the Mac from
1005 kes Implement new select mechanism for GUI programs.
1006 kes Reorganize initialization of stackedWidgets in bat.
1008 kes Add updated nagios plugin supplied by Christian Masopust.
1010 kes More bat implementation.
1011 kes File migrate bug with Pool Occupancy using mediaid instead
1012 of jobids. Fixes bug #795.
1013 kes Fix orphaned buffers in filed backup and verify due to
1014 crypto buffers not freed during errors. Fixes bug #789.
1015 kes Extend new GUI api code to tree commands.
1016 kes Ensure that tree and dot commands check console ACLs.
1017 kes Permit marking directory with trailing slash.
1018 kes Allow 20 console connections (instead of only 10).
1020 kes Add smartctl call to bacula-sd.conf as an example of getting
1023 kes Modify jobq.c to let simultaneous restore jobs run. This may
1024 cause them to fail if they cannot get a drive.
1025 kes Add Client Connect Wait to Storage daemon to permit users to
1026 modify the time the SD waits for a FD connection.
1028 kes Correct virtual changer check which was backwards. This caused
1029 volumes to be unloaded into slots already occupied.
1031 kes Apply Command ACL filter to JobId list in restore command.
1032 kes Correct typeo in var.c patch.
1034 kes Don't let Bacula prune File or Job records for the current Job.
1035 kes Fix variable substitution pad + inc bug reported (with patch)
1038 kes Correct SQLite log table index as reported by Luca Berra.
1040 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1042 kes Begin implementing new comm signals for API.
1043 kes Fix a few places in lib/message.c where the open fd may
1045 kes Continue implementing lib/bsock.c (real class). Make jcr,
1046 who, host, and port private. There are new methods to access
1047 them for non-class use. This required touching a number of files.
1049 kes Add LANG=C to autoconf/randpass so it works with languages other
1050 than English. Fixes bug #788.
1052 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1054 You will not be able to generate Include/Exclude list any more.
1055 It will be fixed soon.
1056 If you want to use this, you can apply
1057 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1059 kes Restore of sockets created false error messages because Bacula
1060 no longer restores sockets, but the code was still trying to
1061 set the attributes on a non-existent file. Reported by a user.
1062 ebl finish RecyclePool feature
1063 Media will takes Pool.RecyclePool
1064 when moving from Scratch to a Pool or when user will do
1065 update volume=xxx frompool
1066 To use it, add RecyclePool = aPool to your Pool resource
1069 RecyclePool = Scratch
1073 kes Expand new BSOCK class adding signal() and new BNET signals.
1074 kes Begin enhancing the dot commands adding a new API function
1075 that returns more information and will make it easier
1076 to interface to the Director from a program.
1078 kes Make DEVICE fd private. Its new name is m_fd, and can be
1079 obtained with dev->fd() outside the class. This is the
1080 first of many DEVICE members to be made private.
1081 kes Implement Michael Renner's idea on having a virtual disk
1082 changer. I made some minor modifications (e.g. I did not
1083 implement the Virtual Changer directive, but simply set
1084 the Changer Command to an empty string.
1086 kes Implement a BSOCK send() method that writes the whole record
1087 in a single write() request rather than in two.
1088 ebl add update volume=xxx recyclepool=yyyy
1089 volume takes recyclepool from pool when using update volume=xxx from pool
1091 kes Fix encryption deblocking bug, which caused some restored files
1092 to be truncated. This fixes bug #763.
1093 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1094 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1096 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1097 ebl Use btime_t instead of uint64_t in media patch.
1099 kes Optimize the use of the database a bit in the Status dir command.
1100 Only open it when needed, ensure that if any previous database
1101 was opened, it is closed.
1103 kes Correct VolCatBytes bug from media patch.
1104 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1105 in the case of orphaned records.
1106 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1107 and File records in 300K chunks to be more efficient. This
1108 idea came from Juan Luis Frances (if I remember right).
1109 kes Apply Eric's scratch patch that moves a purged Volume to
1110 the RecyclePool. Question: how is RecyclePool set? what
1111 happens to the ScratchPool?
1112 kes Apply Eric's media patch that collects read/write media
1113 times as well as byte counts. This patch requires a
1114 simultaneous upgrade of the DIR and SD. Note, there
1115 should be some way to turn off timing. I'm not sure
1116 times are in Bacula units.
1117 kes Apply Eric's batch-insert patch.
1119 kes Update projects list.
1121 kes Implement Include/Exclude file lists in FD as dlists using
1122 the new dlistString class. This permits efficiently having
1123 large include/exclude lists and completes project Item 25.
1124 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1125 console is authorized to cancel the job. This fixes bug
1127 kes Modify SD so that the VolCatJobs medium record is updated
1128 at the beginning of a Job rather than the end. This
1129 fixes bug #775 where exceeding MaxVolJobs caused jobs
1131 kes Added a mutex around getting and setting Volume information
1132 so that multiple simultaneous jobs will single thread.
1134 Switch to using Subversion
1135 kes Remove src/pygtk-console/ from configure
1137 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1138 plus the entrypoints.
1139 kes Apply patch supplied that corrects debug print
1140 in canceling jobs for max run time. Supplied as
1141 part of bug #621, which was previously fixed.
1143 kes Test on job_canceled() and sd_msg_thread_done inside
1144 loop starting the message thread to avoid a race condition.
1146 kes Remove rl_catch_signal from console.c as it conflicted
1147 with the header definition. Fixes bug #765.
1148 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1150 kes Clarify some stored/acquire messages to indicate if the
1151 problem is with read or append.
1153 kes Fix memory leak with storage ids in cats/sql_get.c
1154 kes Terminate watchdog earlier to avoid reference to released
1155 memory -- reported by Jason Austin.
1156 kes Move closing the database from jobq.c to the director daemon
1157 termination routine. This fixes memory leaks for shadow jobs
1158 (i.e. migration jobs).
1159 kes Free up the unique jobid chain items in migrate.c. This fixes
1160 a memory leak problem.
1161 kes Convert some ugly looking for statements to use foreach_alist
1162 in findlib/find.c. This will facilitate converting the structures
1163 to use dlist (for large include/exclude lists).
1164 kes Fix a bug in the btree.c and btree.h routines, then rename them
1165 rblist and add them to be built in src/lib. Include some new
1166 methods written by Rudolf Cejka that make the code more readable
1167 (hides some of the ugly casting).
1168 kes Add set_next() and set_prev() methods which make the code much more
1169 readable. Also add a new dlistString class that facilitates storing
1170 strings in dlists. To be used in the large include/exclude lists.
1171 kes Make some trivial modifications to lib/tree.h that use rblist
1172 rather than dlist for storing the tree links. This was suggested
1173 by Rudolf Cejka. The result of this is that the restore tree now
1174 uses red-black binary trees rather than simple linked lists. This
1175 should give rather dramatic speed improvements for directories
1176 contining large numbers of directories/files (more than 10000).
1178 kes Fix maxruntime bug #621.
1180 ebl Implement the include JobID in spool file name project.
1181 kes Reorder projects file in order determined by Jan 2007 vote.
1182 kes Implement item #12 on project list -- quick release of FD by
1184 kes Fix open of SQLite3 db where user does not have write permission
1185 so that DIR does not crash. Fixes bug #761.
1187 kes Add back missing @ in Win32 Makefile.
1188 kes Change 'Device not configured to autolabel' from INFO
1190 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1191 which should restart an indefinite # of times.
1192 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1193 other DIR specifications.
1195 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1196 Fix path quoting in SQLite scripts.
1197 Fix problems with SHGetFolderPath.
1199 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1201 kes Fix Job restart on error bug that promotes an Inc to a Full
1202 backup. This should fix bug #755.
1203 kes Add qt-console and first cut of code.
1207 kes Fix Bacula->Documentation link on Win32 to point to index.html
1208 instead of bacula.html. Fixed bug #750.
1209 kes Return JobId in db_get_job_record() when JobId==0. This should
1211 kes Do not release source pointers when restarting a failed job.
1213 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1214 This *should* fix bug #747.
1215 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1218 kes Modify USTORE constructor to set an empty store_source string,
1219 and don't copy the store_source string in a cancel. Hopefully
1220 this will fix Arno's seg fault, bug #744.
1221 kes Add back code to disable conio in configure. Fixes bug #743.
1222 kes Correct the Options scanner in the FD to correctly handle
1223 SHA1 option, which was eating the next option. Reported by
1225 kes Add code to indicate when the SD is spooling, spool wait, and
1226 despooling as requested by Alan Brown.
1228 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob