1 Technical notes on version 2.2
5 kes Fix strippath so that it does not get a buffer overrun and crash FD.
7 kes Make inability to change owner/group when creating a dir only a
8 warning rather than an error.
10 ebl Fix SQL query in migration code
12 kes Force unload of volume when wrong volume mounted in SD.
14 kes Fix bat seg fault at termination.
15 kes Add Bacula generated version to bat about box.
17 Beta Release Version 2.2.10-b1
19 kes Permit multiple simultaneous restores -- experiment.
21 kes Backport development stream SD reservation system changes.
25 kes Move final volume swapping code to DCR method and
26 call it from acquire_for_read().
27 kes When wrong volume is mounted during read, unload_autochanger.
29 kes Stop searching for Volumes in SD askdir if DIR returns the
30 same volume name twice in a row.
32 kes Tweak the swap Volume from one drive to another code so that
34 kes Resolve several problems with recycling that broke the new
35 code (these problems are in 2.2.9 as well).
36 kes Remove the volume lock when calling the sysop code.
37 kes Don't mark a reserved volume with no writers as unused otherwise
40 kes Rework class structures for VOLRES, DCR, and DEVICE to make
41 the method names a bit more logical, and for more logically
42 handling the responsibilities.
44 kes Remove redundant code in terminating the scheduler that just
45 causes a seg fault in many cases.
46 kes Cleanup releasing a volume and make it a DCR method.
47 kes Improve algorithm for detecting pre-reserved volume and
50 kes Tweak volume swapping code so it works.
51 kes Correct name overloading in mount.c
52 kes Replace released flag in VOLRES with reserved and add access
53 methods for the VOLRES class.
54 kes Prevent volume from being released while being swapped.
55 kes Refactor parts of stored/mount.c
57 ebl Add sanity checks for VolWriteTime and VolReadTime
58 ebl Take care of bad clock changes while computing VolWriteTime
59 and VolReadTime. This should fix or limit #1066
60 kes Correct error string numbers in dird/catreq.c
61 kes Restructure reserving, acquiring, and mounting volumes. Calls to
62 autochanger are deferred for mount.c -- simplifes the code.
64 kes Do not prune any running job. It just fails the job.
65 kes Lock the volumes when changing dev->reserved_device and marking
66 the volume unused otherwise the device can get reserved by
67 another job before the volume is released, thus blocking it.
70 Beta Release Version 2.2.9-b7
72 kes Close bat console windows first to eliminate error message
74 kes Remove useless code in Scheduler that causes seg fault on
76 kes Correct some SD catalog request error messages.
77 kes Don't allow pruning of any running job.
78 kes Turn off code in read_record that causes a seg fault in the SD
79 when reading past an EOS_LABEL.
80 kes Turn off unloading the autochanger in reserve.c as it just
82 kes Lock volumes when unreserving a device.
83 kes Do not mark volume unused when recycling.
84 kes When acquiring, don't mark volume unused if it is reserved (busy).
86 Beta Release Version 2.2.9-b6
88 kes Eliminate ./configure warning on po directory
89 kes Fix bug #1063, reuse of freed ptr in list nextvol.
90 kes Release regex compile buffer in filed/job.c
91 kes Add proper type of const char in sql_create.c
92 kes Turn off debug in daemon termination routines
93 kes Move free_volume_list() before devices are freed in stored.c
94 kes Fix reference to uninitalized stack variables in bregex.c.
95 This should correct bug #1067.
97 kes Fix possible seg fault in SD when freeing a volume entry.
99 kes Apply patch from bug #1069 that corrects spurious error messages
100 when ACLs enabled on SGI but no ACL exists.
101 ebl Fix a storage deamon segfault at debug level 500.
103 Beta Release Version 2.2.9-b5 -- not released
105 Beta Release Version 2.2.9-b4
107 kes Re-enable code to remember last volume mounted on a non-tape
109 kes Add patch supplied in bug #1068 that fixes a SD crash when using
110 a Virtual autochanger.
111 kes Generate correct JobMedia records during spooling/despooling when
112 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
113 <tih@hamartun.priv.no> for excellent analysis and testing.
115 Beta release Version 2.2.9-b3
117 kes Rework certain SD locking based on gdb tracebacks of deadlocks
118 sent by Eric. This code now uses only the volume_lock() rather
119 than the reservations lock when at EOM and acquiring a new
121 kes Ensure only one exit point in several subroutines.
123 Beta release version 2.2.9-b2
125 kes Fix to initial tape drive open to release the volume name
127 Beta release Version 2.2.9-b1
129 kes Fix to JobMedia fix.
130 kes Fix bug pointed out by Peter Much that causes the StorageId to
131 be updated when reading a tape (during migration, it could have
132 been incorrectly set to the write StorageId).
134 kes Implement autostart scripts for Debian
136 kes Fix mtx-changer.in for broken Debian mt program.
138 kes Massive commit of all fixes and back ports to create 2.2.9
140 kes Apply doc fix from bug #1062.
141 kes Resolve crash and improper restore wx-console Win32 restore
142 GUI. Fixes bug #1065.
143 kes Update Win32 wxWidgets to latest version.
144 kes Attempt to do correct handling of Win32 mount points. Should
146 kes Fix Win32 FD backup/restore memory leak due to improper termination
147 of BackupRead/Write. This fixes bug# 1038.
148 kes Add const to AIX prototype for initgroups()
150 kes Undo bug #1047 heap overrun fix as it is not correct.
152 kes Fix creating first JobMedia record during Migration to include
153 proper index. This caused slow restores of migrated jobs.
155 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
156 and do not strip paths on symbolic links.
157 kes Set catalog backup database and user name from values specified on
158 the ./configure line.
159 ebl Apply patch to correct bug #1031, about wrong pool source information
162 Release Version 2.2.8
164 kes Apply patch from Martin to correct bug #1040, bscan sets existing
166 kes Fixed important spelling error in doc -- bug #1045.
168 kes Move initialization of read/write res lock earlier in the code.
169 This fixes the crash with a null conf file. This fixes bug
171 kes Redefine CURES in lib/parse_conf to be URES and move it all
172 into lib/parse_conf.c -- this responds to bug #1042, but does
173 not fix it. The fix is not to compile with FORTIFY_SOURCE.
174 kes Backport fix de-referencing a NULL pointer in the scanner from
175 the trunk SVN. I don't think this was reported as a bug.
177 Beta release Version 2.2.8
179 kes Re-enable the new job code editing (%f).
181 kes Fix bsnprintf for float point numbers. I broke recently when
182 parameterizing some variables. This fixes bug #1036.
184 kes Move Heartbeat documentation from Job to Director resource.
185 This fixes bug #1033.
187 kes Fix existing switch drive SD code to call autochanger to release
188 any old volume. This must be done to keep the autochanger from
189 releasing subsequently newly reserved volumes in doing a close().
190 This should possibly fix bugs #1032 and #1018.
191 kes Apply big backport of current SVN SD code that corrects a number
192 of race conditions. This is a first step in fixing bug #1018.
194 ebl Fixes bug #1028 where "Selection Type" option was not usable
198 Release Version 2.2.7
200 kes Partial back out (disabled) %f job code editing because it
201 does not build on Win32.
202 kes Fix seg fault Frank Sweetser reports in regression testing
203 on his systems. The problem was that the original author of
204 bsnprintf.c did not take into account the side effects of
205 using ++x in the argument to a #define.
207 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
208 that implements double quoting include names in conf files,
209 and also allows piping input by having the first character
210 be a vertical bar (|).
211 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
212 that implement %f in RunScripts to pass the FileSet name.
213 kes Skip leading | when lex input comes from a pipe as suggested
214 by Michael Stapelberg <michael@stapelberg.de>.
216 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
217 Nerijus Baliunas <nerijus@users.sourceforge.net>
219 kes This patch corrects a problem where the maximum concurrent storage
220 jobs counter gets out of sync during restore jobs causing jobs to
221 'wait on max Storage jobs'. This patch fixes bug #1009.
223 kes Add new include to postgresql.c suggested by Marc Cousins so
224 that it compiles correctly with pgre version 8.3. Also fix
225 misuse of %x with pointer (should be %p).
227 kes This patch fixes bcopy so that it produces correct Volumes.
229 kes This patch eliminates spurious output to the console during a VerifyVolume
230 job that contains encrypted data. It fixes bug #1024.
232 kes This patch prevents the 'status dir' command from trying to use a scratch
233 volume and possibly moving it from one pool to another. This patch fixes
236 kes Fix --archivedir addition to configure. Replace it with
237 --with-archivedir in configure.in This fixes the regression
239 kes This patch fixes bug #1012 where the job is canceled because
240 of Max Run Time exceeded when the job has not yet started.
242 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
243 one 'part' to write. Instead of each part being stored on disk,
244 written to DVD, then deleted from disk, all parts are written to disk,
245 and only the last is written and deleted from disk.
247 kes Correct typos in disk-changer.in
249 kes This patch fixes the status command to include the formating string for
250 JS_AttrInserting. It fixes bug #1021.
251 kes This patch should fix the Mac OS X build problem on the latest
252 Darwin, where sys/types.h was not included correctly (apparently
253 due to a change in the Mac headers). The solution was to explicitly
254 ensure that it is defined for the ./configure.
255 This patch also has a rebuild of configure that includes the Debian
256 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
257 kes This patch should ensure that queued messages to the console are
258 displayed as soon as possible. It should fix bug #1007, but has been
259 reported not to work.
261 kes This patch fixes the infinite loop when trying to increase the
262 maximum number of volumes in a Pool during the add command.
263 This patch fixes bug #1008.
265 Release Version 2.2.6
267 kes Get fix for joblist bug in bat from trunk.
269 kes This patch fixes bug #1003 where putting the message output from
270 a Verify job into the catalog results in a recursive loop. The problem
271 seems to show up only with postgresql (to be verified).
273 kes Fix bug #942 where lots of emails where generated when the heartbeat
274 interval was low and Bacula wanted a different tape from the one in
277 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
278 which was updated during a restore (or a reading migration) bug #982
280 ebl Use qmake-qt4 instead of qmake when available (debian system).
282 kes Add a security warning to src/cats/make_catalog_backup.in indicating
283 that passing the password via the command line (arg 3) is insecure.
284 This responds to bug #990 (it doesn't fix it).
285 kes Apply 2.2.5-postgresql-errors.patch
286 kes Remove unneeded File table index on JobId, which is already
287 present as the first index of another multi-index.
289 kes Set default debug_level to zero. This corrects bugs #991 and #993.
290 kes Fix a crash in bat when it cannot connect to the Director for example
291 if the Director is not running.
293 kes Activate Close button on tray-monitor window. This fixes
296 kes Fix spurious warning message printed when creating a volume with
297 a LabelFormat. This fixes bug #976.
299 Release Version 2.2.5
301 kes Add JobId in place of Job name in all the Jmsg() output.
302 kes Correct the APP_DESC for the Win32 storage service (remove an e).
304 kes Add new SD despooling attributes and Dir inserting attributes
305 job status codes. This fixes bug #961.
306 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
308 kes Fix doc issue. This fixes bug #963.
309 kes Fix listing performance problems in bat. Pointed out by
311 ebl Fix replace on restore. This fixes bug #969
312 kes Fix bat code that tests for Win32. This should fix bug #968
313 kes Query 5 list wrong Vol after migration. This fixes bug #960
315 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
316 in back porting from 2.3.x
318 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
319 The details are included in the notes in this file.
321 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
322 messages; it fixes a problem opening the SQLite3 database when multiple
323 simultaneous jobs were running; it fixes a bug with certain versions of
324 MySQL where batch inserts failed because of table name character case
325 (upper/lower) differences.
326 kes Fix race condition that drops final block written to volume.
327 This happens in rare cases with multiple simultaneous jobs
328 when the Volume fills. This fixes bug #964. May be related
329 to bug #935 and possibly #903.
331 kes Fix FD->SD authorization failure, which was due to spurious
332 wakeups from a pthread_cond_timedwait(). Simply check the
333 predicate before continuing. This fixes bug #953
334 dvl Add new configuration item --archivedir
335 dvl Adjust regression tests to use tmp not /tmp. This will allow
336 multiple concurrent runs of the regression tests.
338 kes Eliminate more strerror() and replace with bstrerror().
339 kes Remove BSD getopt and replace with unrestricted IBM version.
340 kes Fix Win32 build for changed calling sequences.
342 kes Fix FD->SD authorization failure, which was due to spurious
343 wakeups from a pthread_cond_timedwait(). Simply check the
344 predicate before continuing. This fixes bug #953.
345 kes Add const char where needed (more to do).
347 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
348 kes Don't overwrite error message in check_tables_version.
350 kes Unlock batch insert tables with same calls used elsewhere.
351 kes Allow starting 59 jobs a second.
352 kes Make SD session key more random.
353 kes Add retry for SQLite opening db if it fails. Probably helps
355 kes Suppress extra error messages during batch insert failure.
357 kes Put some FD auth code on dbglvl rather than fixed.
358 kes Return insert attributes error message in db msg buffer to avoid
359 false error messages. Helps fix bug #966.
360 kes Separate batch init error messages. Probably helps fix bug #966.
361 kes If Dir gets an error during inserting attributes, cancel SD.
362 This reduces unnecessary error messages.
364 ebl Cleanup batch insert code. Probably fixes bug #965.
366 kes Turn off some code when batch insert not enabled.
367 kes Edit FD name in connect error messages.
369 kes Add code to handle tray monitor separated from Win32 FD.
370 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
372 kes Fix ANSI tape labeling. This fixes bug #954.
373 kes Increase the max block size to 4MB fixes bug #957.
374 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
375 is not properly mounted (recognized) during a poll.
376 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
377 Job that has differences reports Verify OK.
378 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
380 Release Version 2.2.4
382 kes Increase size of name string when FD making connection to SD.
385 kes Add waits to multiple exit detection code to try to force pid
386 file to always be deleted.
387 kes Restore good dev.tar.gz to rescue set appropriate binary property.
389 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
390 trying to switch drives by checking for blocking before unblocking.
392 kes Cancel storage daemon in all cases where FD reports error. This
393 should fix virtually all cases of bug #920.
395 kes Fix error message that was clobbered when Dir tells SD it does not
396 have write permission on Volume. This should fix a minor point
397 in bug #942, but not the main problem.
398 kes Add code to cancel job in SD if FD connection fails. This should
400 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
401 kes Fix migration code to get correct Volume name with multiple volumes
402 by skipping |. Fixes bug #936.
403 kes Implement patch supplied by Landon to fix bug #944 where using
404 TLS with bconsole uses 99+% of the CPU.
405 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
407 kes Move patches into patches directory.
409 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
412 ebl Using 'm' in bconsole will show messages like before,
413 and not memory usage.
415 Release Version 2.2.3
416 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
419 kes Fix bug #935, and probably also bug #903 where files were not
420 restored. MediaId was not properly set in JobMedia record after
423 kes Add ./configure search in qwt-qt4 for qwt package
424 kes Apply Martin Simmons patch that should turn off the new API usage
425 when batch insert is turned off allowing building on older
428 Release Version 2.2.2
430 ebl Detect if new PosgreSQL batch insert API is present.
431 kes Correct incorrect mempool call causing Director crash.
432 sb Update spec files for 2.2.1 release
434 Release Version 2.2.1
436 kes Update POTFILES.in
437 kes Cleanup a few underquoted AC_DEFUNs in configure
438 kes Apply patch from Martin Simmons that adds a test for va_copy to
441 kes Fix bug #921 by increasing the number of tries to create a new volume
443 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
444 can be called multiple times. Implement a version for machines
445 without va_copy() that gets a big buffer.
447 kes Integrate more portable zone offset code into bsmtp.c
448 Submitted by Attila Fülöp.
450 kes Fix bad SD->FD return status reported by
451 (James Harper) <james.harper@bendigoit.com.au>
452 ebl Fix a bug in read_close_session which return random status
453 thanks to James Harper
455 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
456 and directory names during restore of single file/directories.
457 kes Add sanity checks to .sql command when string is empty. Hopefully
458 that will resolve Dirks Director crash.
460 kes Apply patch submitted by Martin Simmons that corrects a seg fault
461 in the bsmtp chat subroutine when debug is >= 10.
463 kes Fix Director crash when running bat SQL queries.
464 kes Add David's notes on Item 8: Copy pools.
466 kes Rework projects file to be current and ready for a vote.
467 kes Enhance lex scanner error message.
469 kes Tweak LICENSE file to mention BSD code.
470 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
471 if specified on the ./configure.
472 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
473 This class is intended to allow us to open a second bsock to the
474 Director while in the restore subdialog.
476 kes Fix configure to create bat Makefile before creating dependencies.
477 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
478 kes Add a tooltip to the tray monitor.
479 dvl Set the Director's PID file before dropping privs. This fixes
482 kes Update AUTHORs file
483 kes Increase the default max concurrent jobs to 20 in FD and SD to
484 correspond with the default .conf files.
485 kes Rewrite the Win32 service routines. This eliminates the 3 copies
486 some different, of the same file created by RN when porting the
488 kes Rearrange some of the Win32 directories and the placement of the files
490 kes Set DEVELOPER flag in version.h
492 ========================================================================
493 Release Version 2.2.0
495 kes Apply a second doc patch from Marc.
496 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
497 improves the tips section that discusses how to setup multiple
500 kes Update bat README file.
501 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
502 corrects a typo in the Recycle status check in db_find_next_volume().
503 This will probably fix a number of annoying problems with multiple
505 kes Modify most of dird/msgchan.c to use bsock class calls rather than
506 bnet calls -- no functionality change.
508 kes Modify the Verify output to specify if files are missing on
509 the Volume(s) or disk. Fixes confusion in bug #916.
510 kes When more than one Volume is read in a migration job, the last
511 Volume bytes reported are from the last read volume rather than
512 the last written volume. Fixed. This fixes bug #910.
513 kes Fix display of Recycle flag after update volume=foo recycle=yes.
514 It previously printed New Recyle flag is: no. This fixes bug
517 kes Correct seg fault when switching tape drives during restore.
518 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
519 be used until after 2.2.0 release.
521 kes Remove fnmatch() in SD that permitted wild card specifications.
524 kes Fix %g in filename returned by SQL for browse tree reported by
526 kes Fix configure so that it puts config.out in the cwd rather than
528 kes Attempt to fix the locking problem reported by Eric in bug #906.
529 kes Make berrno class to leave errno unchanged after constructor call.
530 kes Make bnet_server use the heap rather than the stack to allocate
531 its socket fd pointers to avoid a crash at termination. Problem
532 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
534 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
535 and putting it in depkgs-qt along with Qt4.3.
537 kes Rework code in acquire.c that switches drives for reading when
538 the Media Type does not match. This should fix bug #906
540 ebl Fix a director segfault during job setup #907
541 kes Correct seg fault in postgresql when first operation returns no
542 rows. Fixes Dirks File browser problem seg fault with bat.
544 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
545 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
548 kes Implement PopUp YES/NO dialog for bat.
550 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
552 kes Correct RunScript to terminate job in FD on failure.
553 kes Change abort_on_error and AbortJobOnError to fail_on_error
554 and FailJobOnError in RunScripts.
555 kes Minor tweaks of code formating in RunScripts, principally to
556 avoid depassing 80 columns.
558 kes Eliminate one #ifdef Win32 in bsmtp
559 kes Implement grow tool to grow a file for testing very large databases.
560 kes Add big-vol-test to test Bacula seeking with > 5GB.
563 kes Modify find_next_volume() to return all values in Media record.
564 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
568 kes Update Release notes
570 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
571 Warning, in previous beta version, all media get from scratch keep their
574 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
575 This should fix bug #842. Made a note to look at removing the temp
576 files at the end of the install.
577 kes Add ability to mount and unmount a file device providing it is
578 marked as being removable and has the appropriate mount and unmount
579 commands defined in the Device resource. This fixes bug #830.
580 kes When applying a storage override, release all previous storage
581 definitions rather than just prepending the new storage.
582 This should prevent a good deal of confusion.
584 kes Implement ./configure search for qwt libraries.
586 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
587 Win32 FD. This should fix bug #893.
588 kes Remove an unnecessary beep in Win32 init code.
589 kes Update copyright dates in Win32 executable about boxes.
590 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
591 code with a BSD getopt.c and getopt.h.
592 kes Remove sched.h from the Win32 compat directory -- not used.
593 kes Remove the Exit menu item from the Win32 tray monitor. If you really
594 need to shut it down, do it through the services panel or the command
596 kes Remove some inappropriate Bacula FSFE copyrights.
597 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
598 kes Fix regress config non-portable test as pointed out by
599 Florian Heigl <florian.heigl@gmail.com>
600 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
601 as pointed out by Florian Heigl <florian.heigl@gmail.com>
603 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
604 Reported by Frank Sweetser.
608 kes Fix client-only build.
609 kes Integrate client-only fixes for bsys (initgroups) and conio from
610 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
611 kes Make arguments to get_scratch_volume() in same order as other
613 kes Rework the prune_volumes() subroutine so that after purging and
614 no volume found in desired pool, it will check for a scratch
615 volume. This prevents recycling the whole scratch pool.
616 kes Add code to status storage to print boffset_t (largefile support).
618 kes Move qwt (Graphics libarary for Qt4) to depkgs.
619 kes You now need a --with-qwt=<dir> to be able to build bat.
620 kes Update src/win32/cats/bacula_cats.def to include the new
621 db_get_query_dbids() call on Win32.
623 kes Correct a problem when selecting a scratch volume and moving
624 it to another pool that lost some columns.
625 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
626 kes Enhance Autochanger error messages to include Volume and device name.
627 kes Rework prune_volumes() code to take account of InChanger flag,
628 and to handle recycling volumes going to the Scratch pool and
629 current pool because the RecyclePool directive.
630 kes Implement a better and more efficient db_get_query_dbids() to
631 handle creating and passing back a list of DBIds.
635 kes Start work on new more efficient DBId subroutine. First use
636 will be for recycling volume to Scratch inchanger.
637 kes Increase number of JobIds in pruning from 1000 to 10000.
638 This to be replaced by above routine.
639 kes Begin implementation of building Qt4 on Win32.
640 kes Correct typo in fix I added for bad TLS shutdown.
641 kes Pull 2.0.3 patches into patches directory.
642 kes Update Release notes. Include qt-console in line count.
643 kes Update Projects file.
645 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
646 bug in migration code where a job that spanned two volumes
649 kes Implement new BST_DESPOOLING blocked state. Change from locking
650 during despooling in SD to blocking. This means that other threads
651 can work with the device structure, in particular the reservations
652 system while despooling.
654 kes Fix return in reservation message queue that missed clearing
655 the jcr lock (implemented 26Jun07 below).
656 kes Rename a number of dev methods to make locking function names
658 kes Document locking in lock.c. Move lock structures to new file
661 kes Move reservations message lock to lock jcr only this
663 kes Move main SD locking code into lock.c (new file).
664 kes Update Win32 build to include lock.c
668 kes Dirk committed the qwt library code for drawing graphs in bat.
669 kes Tweak install of qwt so that it is integrated with ./configure.
671 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
672 out by Eric (my typo).
673 ebl Fix configure.in to get batch mode enable
674 kes Return correct string from authenticate.cpp in bat when connecting
676 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
677 spurious line drops when using TLS.
678 kes Do not file reparse points when restoring a file that already
681 kes Implement Windows reparse points -- similar to directories, but
682 we do not descend into it. This is a first cut. They seem to
683 be backed up, but restore is not yet tested.
684 kes Remove restore_blocking in tls code when shutting a socket to leave
685 it in blocking mode. Hopefully this will fix the encryption bug
686 reported by Frank Sweetser.
687 kes When opening a file for backup, tell the OS that we are going to
688 read it sequentially -- optimization.
689 kes Change variable names in authenticate_director() to not conflict
690 with member names in bat. Caused great confusion with compiler,
693 kes Queue openssl error messages in case of comm problem.
694 kes Do shutdown() call if socket terminated.
695 kes Remove some duplicated code in tls.c
696 kes Move more of the bsock member variables into private and access
698 kes Add Frank Sweetser's tls-test to the regression suite.
700 kes Add Swedish sv.po file
702 kes Don't print clock skew message in FD if less than 3 seconds diff.
703 kes Add a bit of VSS info to status client.
704 kes Implement a first cut of Vista VSS, using Win2003 code.
708 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
709 loaded tape but uses first drive).
710 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
711 This was indeed a Win32 issue.
713 kes Simplify search of autochanger for in-use Volume.
714 kes Fix exit condition of check for in-use volume. kes Remove
715 inappropriate my_postgresql_free_result() in db_close()
717 kes Fix bad return in FD when encryption signature not found.
718 Probably caused a crash.
719 kes Inhibit missing encryption signature error messages for
720 file types where no signature computed.
721 kes Correct inverted check on autochanger in reservation system.
722 kes Tweak debug code in autochanger reservation.
724 kes Add some additional locking in the cats directory in subroutines
725 that modify packet variables called from batch insert.
726 kes Rework how dcrs are allocated. new_dcr() can now be called
727 with an existing pointer, and it will simply clean it up.
728 This allows the reservation system to test various different
729 devices, and will permit easy device changes.
730 kes A bunch of changes all over to handle new new_dcr() calling
732 kes Work more on the Volume management in the SD. Remember Volumes
733 for tape drives and for autochangers (even virtual disk changers).
734 kes When looking at the Volume list to reserve a drive, handle
735 autochanger names correctly by interating through the changer
736 devices. Also call the Director to see if a Volume is suitable
738 kes Fix some bugs in bscan. Make sure all media records are written.
739 Make sure that valid JobMedia records are written for disk files.
740 Previously they were completely wrong.
741 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
742 that the URLs don't change and so that the developers will all
743 work off the same copy. Rebuild from scrach.
744 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
748 kes Fix seg fault in FD from incorrect digest size.
749 kes Fix argument to non-OpenSSL crypto.c subroutine.
753 kes Remove a few malloc()s from the encryption code.
754 kes Use the class calls to bsock in filed/backup.c and restore.c in
755 place of the old bnet_xxx code.
756 kes Implement code that does an on the fly calculation of the
757 signing digest during restore of encrypted files. It makes
758 a best guess at the algorithm, and if it is not correct, will
759 then revert to the old code which reads the file after it is
761 kes Implement at least one missing crypto stream in stream_to_ascii()
762 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
763 #877 where a reload with bad syntax causes Dir to exit.
765 Cut: 2.1.14 beta (not released)
767 kes Do not free a volume on a tape drive until another volume is
768 mounted and read, or the autochanger unloads the volume.
769 This should help the SD re-use volumes that are already mounted,
770 and should fix bug #886.
771 kes Apply patch from user brettedgar that allows gnome2-console include
772 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
773 kes Apply patch from Lucien Weller that fixes day of week calculation
774 because of DST flag problem. Fixes bug #887.
776 kes Move find_next_appendable_volume() to after acquiring a valid device
777 in reserve.c. This fixes bug #864 -- confirmed by reporter.
779 kes Unable to reproduce bug 872. However added additional testing for
781 kes Bug #874 resolved by documenting SQLite limitations.
782 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
783 kes Bug #881 resolved by removing typo in mtx-changer script.
784 kes Made Frank Sweetser's wiki the official Bacula wiki with his
785 approval. Added a link to the wiki on the web page, and implemented
786 a backup from http://paramount.ind.wpi.edu
788 kes Fix update allfrompool to pass pool name.
790 kes Convert to pure GPL v2 license.
791 kes Fix sscanf problems reported by Peter Buschman that caused
792 a bus error on Solaris.
793 kes Rework (simplify) the select prompt in bat.
794 kes Move get_jobid_from_tid() into lib and create a
796 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
797 should definitely fix the problem of lost error messages in the
799 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
800 kes Eliminate tcpd.h from the project. Enclose the #include from the
801 library with extern C ...
802 kes Add print of signal name when a signal is trapped.
806 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
808 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
809 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
810 makes SQLit3 run 30 times faster, though a bit less safe.
811 kes Implement --with-batch-insert in configure and detection of thread
812 safe libraries. It is on by default, but turned off if no thread
813 safe library (e.g. SQLite 2) is available.
815 kes Fix Bacula PostgreSQL buffer overruns.
816 kes Do better checking for NULL results returned from PostgreSQL;
817 implement retry for failed queries; clear results buffer after
818 failed query. Hopefully this will correct the PostgreSQL failures.
820 kes Implement algorithm to handle only one appendable volume with
821 Prefer Mounted Volumes = no.
822 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
823 returned from a query.
824 kes Make volume lock recursive.
825 kes Implement an additional volume reservation algorithm that
826 starts by considering all reserved volumes then uses the
827 old brute force algorithm of searching the resources to
828 find a suitable device.
829 kes Add new reservations debug code and refine the old code.
830 kes Update the win32/dll/bacula.defs file.
832 kes Tweak reservations algorithm to permit a few more cases, i.e.
833 volume reserved, but on different drive, ...
834 kes Enhance SD status to include Pool and Media Type for drive in a
835 more readable format (a bit longer).
836 kes Fix PostgreSQL double free.
838 kes Minor refactoring of restore decryption code.
839 kes Add code to smartall.c to detect double free of a buffer.
841 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
842 so that bsmtp will create a correct email address (mailbox only).
843 kes Modify 'memory' command so that the buffers are listed as 'In use'
844 to avoid confusion with Orphaned buffers.
845 kes I reworked the OpenSSL include/lib flags to be handled in
846 the standard Bacula way, which should fix bug #863 concerning
847 non-standard OpenSSL libraries.
849 kes Implement Help Browser window for bat.
850 kes Fix reload bug that reset StorageId to zero.
852 kes Fix TLS #ifdefing when TLS turned off.
853 kes Ensure that when labelling a tape with Slot=0 that InChanger
855 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
857 kes Add StartTime to final uar_sel_jobid_temp query so that we can
858 add DISTINCT (required by PostgreSQL).
859 kes Implement BSOCK authenticate_director() method. Eventually will
860 authenicate all daemons.
861 kes Move several more functions into the BSOCK class.
863 kes Add code to tell the OS that we no longer need a cached
864 file that we were reading. In findlib/bfile.c. Also,
865 only cache files that we are reading. Thanks to
866 Tobias Oetiker <tobi@oetiker.ch> for the idea.
867 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
868 kes Implement script to automatically generate cats and dll .def
870 kes Update README.mingw32 to include new .def file generation.
871 kes Correct typo in UTF-8 error message as reported by:
872 jhernandez <julianhernandez@gmail.com>
873 kes Add additional sm_check() code on debug level 1.
874 kes Set default debug level to 1.
875 kes Trap SIGABRT in attempt to get traceback.
877 kes Reduce bat connect timeout from 30 to 15 seconds.
878 kes More restructuring and implementing BSOCK class in place of
880 kes Remove a few unnecessary malloc() tests in crypto code.
881 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
882 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
883 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
885 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
887 kes Fix Verify InitCatalog. The attributes were not pointing to the
888 correct saved location.
889 kes Implement message callback so that GUI is sure to get all
890 daemon messages. Currently displayed in a dialog in bat.
891 kes Ignore SIGUSR2 (Bacula timer) in bat.
892 kes Apply regress patch from bug #859 to allow regress to work
893 with Solaris compiler.
895 kes Begin adding TLS support to bat.
896 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
897 clean up lex.c and make it more readable.
899 kes Move more bnet functions into the BSOCK class.
900 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
901 kes Complete change of berrno strerror() method to bstrerror()
905 kes Cleanup incorrect email addresses in bsmtp.
906 kes Make bat display initial messages rather than discard them.
908 kes First cut of adding .mod to the run command.
909 kes Implement auto display of messages in bat.
910 kes Enhanced preferences to allow all Bacula output to be
913 kes Try to make bsmtp date routines more generic.
914 kes Fixed bug #856 autochanger documentation.
915 kes Rework bsmtp date editing for Win32. This fixes bug #854.
916 kes Add new cats entry point so Win32 builds.
918 kes Attempt to fix bsmtp date editing on OSes without %z editing.
920 kes Do better checking for the MySQL 64 bit libraries looking for both
921 .a and .so libraries.
922 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
923 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
924 kes Require the thread safe version of MySQL during configure. Thanks
925 to Andre Noll for pointing this out.
926 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
927 continuing in migration code.
928 kes Apply implementation of tray-monitor font derived from gnome-console
929 submitted by Andreas Piesk <a.piesk@gmx.net>
931 kes Eliminate important memory loss in SQLite
932 kes Fixed the batch insert MySQL thread specific data that was not
933 being freed. See cats/mysql.c:db_thread_cleanup().
934 kes Fix restore before command.
935 kes Convert old hdr.name to name() in a few places.
936 kes Implement update jobid command.
937 kes Return all time_t dates in db_get_job_record()
938 kes Stop watchdog in SD earlier.
939 kes Put Pool just after Storage in please mount message.
940 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
943 kes Update the po files.
944 kes Fix Verify InitCatalog by making it cache attributes.
946 kes Change name bacula-bat to bat for man 1 page to correspond to
948 kes Check for client and store NULL pointers in status command. This
950 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
951 kes Fix sign extended editing of %p.
952 kes Clean out a little old #ifdefing in cats/mysql.c
954 kes If time diff between DIR and FD is more than 600 seconds convert
955 INFO message to WARNING.
956 kes Implement heap size display in status for all daemons.
957 kes Attempt to fix MySQL db open memory loss (not successfull).
958 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
959 kes Eliminate memory loss in MySQL (possibly other SQLs) during
960 Query. This looks like a MySQL but but by doing extra releases,
961 the memory goes away. This should fix bug #847.
963 kes When backup fails, cancel SD before waiting for sd termination.
964 kes If SD is waiting for FD to connect during cancel, wake up the
966 kes Fix fsf code so that errno is correctly reported.
967 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
969 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
970 so that Bacula doesn't later stumble into a seg fault.
971 kes Use the term Restore Client in the restore Job report.
972 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
973 the original job's FileSetId.
974 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
975 spooling in migration jobs. Not yet tested.
976 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
977 reading conf file from a pipe. However, do it with open_bpipe()
978 rather than popen. Not yet tested.
980 kes Fix an ugly bug where the VolCatBytes were getting updated
982 kes Implement bconsole memory command that prints current memory
983 usage, plus smartalloc dump.
984 kes Clarify some error messages in backup, admin, and migrate.
985 kes Shrink label dialog to smaller size.
986 kes Invert Cancel OK buttons on restore to be OK Cancel.
987 kes More strerror() to bstrerror() conversions.
989 kes Start implementing bstrerror() in place of strerror().
990 kes Stripping path -- seems to work.
992 kes Prevent door and port files from being restored (mostly
994 kes Free an unreleased buffer in compat code.
995 kes Change console Job name from *Console* to -Console- to eliminate
996 Win32 filename problems. Put Win32 path separator when creating
997 Console file. This fixes bug #846.
998 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1000 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1002 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1003 to force Win32 error message.
1005 kes First cut strip path. The data should be passed to the FD,
1006 but nothing is done with it yet.
1007 kes Enhance the digest and signature routines in the crypto
1008 library to accept a JCR and to use it to print error messages
1009 so that they will go in the Job report rather than the daemon's
1011 kes Simplify some of the verify signature code.
1012 kes Simplify a few of the alternative returns in the signature
1015 ebl Use only POSIX regex instead of GNU regex in breg.c for
1016 File relocation. It fix broken freebsd compilation.
1017 kes Convert all other Dir files to use new ua class message
1019 kes Tentative fix for missing digest signature in bug 807.
1020 kes Correct handle problem in new win32_ftruncate routine.
1021 kes Convert ua_purge.c and ua_update.c to use new ua class
1022 message routines for bat.
1024 kes Correct incorrect installation of LICENSE in Win32 installer.
1025 kes Display LICENSE at the beginning of the Win32 install.
1026 kes Attempt to correct the need for the png files to be installed
1028 kes Reapply my bat.conf install script in qt-console. I think I
1029 editted bat.pro instead of bat.pro.in and it was lost.
1030 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1031 the /var/lock/subsys for subsysdir. Also corrects typos in the
1034 kes First cut update job.
1035 kes Correct configure to include qmake of src/qt-console directory.
1037 kes Make restore job yes/mod/no print in one command so GUI works.
1038 kes First cut implementing backup and restore client.
1039 kes Correct editing in Verify output that caused a seg fault.
1041 kes Insure that bat.conf is not overwritten during installation.
1042 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1043 while I was implementing migration in March 2006 !
1045 ebl Cleanup file relocation, using char *RegexWhere instead of
1046 char *where + bool where_use_regexp
1047 kes Update some manpages and add bat manpage.
1048 kes Make a first cut at converting bacula.spec.in for bwx-console
1050 kes Apply patch from John Goerzen to add hostname as fourth argument
1051 to make_catalog_backup script.
1052 kes Fix typos I introduced into bsmtp.c
1053 kes Make pm_strxxx() routines handle input of NULL pointer. This
1054 is to protect from NULL pointers returned from SQL databases.
1055 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1056 kes Add more debug to FIFO code -- fix fifo regression test.
1058 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1059 kes Add thread timer to bnet_connect() to break from OS if wait time
1062 kes Update Win32 build to include new files, new symbols, and
1064 kes Implement socket level heartbeat (tcp_keepidle)
1065 ebl Commit File relocation patch
1066 kes Make bat have 'make install' target.
1067 kes Warn during install if old gnome-console binary found.
1068 kes Warn during install if old wx-console binary found.
1069 kes Add -8 option to bsmtp command line to add content type utf-8.
1070 Fixes bug #809. (Character coding problem in bsmtp).
1071 kes If < is found in target (from, to, cc) then do not enclose the
1072 target in < > in bsmtp. Fixes bug #772 (malformed address).
1073 kes When printing certain items in dbcheck, stop after 300000.
1074 Fixes bug #822. (dbcheck loops).
1075 kes Incorrect status in Dir after waiting for mount with poll set.
1078 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1080 kes Print waiting to reserve a device every 5 mins.
1082 kes Don't call close_part in label.c if tape and relabel.
1083 kes Don't free volume if busy in close() -- should help with
1085 ebl Fix #824 RunScript bug (After script could be execute twice)
1086 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1087 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1088 Add a regression script to test RunScript
1090 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1093 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1094 deprecated. No additional bugs will be fixed, and they will be dropped
1095 in a future release (probably 2.4.0).
1096 kes Change name of wx-console to bwx-console to make it more Bacula
1098 kes Change the name of gnome-console to bgnome-console to make it
1101 kes Some time in March, a Feature Request with patch from Jorj Bauer
1102 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1104 The ability for the director to validate a Client (FD) CN against
1105 an arbitrary set of patterns rather than the hostname, with
1106 A new 'TLS Allowed CN' set of directives which are implemented
1107 in the Client resource. Then pattern matching is used in place
1108 of hostname matching against the Certificate's CN. As an example, we
1109 have certificates which (a) use a local CA, and (b) have a CN of the
1111 kes Add new/changed entry points to Win32 build
1112 kes Create unaccepted-projects for projects that are not accepted.
1113 kes Simplify locking in the reservations system.
1114 kes Add more debug code in reservations.
1115 kes Make sure error condition on reserving a volume is handled correctly.
1116 kes Correct handling of volume_in_use.
1117 kes Correct handling of initializing a device.
1118 kes Move handling of broadcasting releasing a device into release_device().
1119 kes Correct attaching dcr to dev so that it is only done if device
1120 is properly initiated.
1122 kes Locking debug level tweaks in SD.
1123 kes Tweak new Volume code.
1125 kes Add exec external-command [wait-seconds] to bconsole. This
1126 executes the external-command. Note! normally external-command
1127 should be enclosed in double quotes.
1128 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1129 it should normally be off in a production system.
1131 kes Implement die command for SD so that we can force it to dump.
1132 kes Implement SD lock debug code.
1133 kes Implement new algorithm for keeping Volume list in SD. It
1134 is now owned by the device.
1136 kes Implement new code for freeing in use volumes that should
1137 resolve if not all, some of the problems of multiple drive
1138 tape conflicts described in bug 801.
1140 kes Fix gui/bacula-web/images files in svn.
1141 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1143 ebl Fix a bug in batch mode (in string escape)
1144 kes Correct migration prune SQL typo that crept in in a
1145 recent 2.1.x change.
1147 kes Move bnet_despool() into class in bsock.c
1148 kes Modify job report to include director name and Build OS.
1149 kes Move drop root privilege and check_catalog() before fork.
1150 kes Add update database scripts (version 9 to 10) to updatedb directory.
1152 ebl Check size and age of each file after its backup to see if
1153 it has changed during backup, if 'checkfilechanges' is set.
1154 The FD will do an extra check (stat(2)) after
1155 each file backup. mtime, ctime and size are compared with
1156 'before backup' information. If time or size mismatch, an
1157 error message will be generated. You must upgrade FD to use it.
1159 kes Make database name and user configurable
1160 --with-db-name=xxx --with-db-user=xxx
1161 kes Add back database type to message.c for debugging.
1163 kes Implement dir_sql() which issues an SQL query.
1164 kes Modify bat medialist to use dir_sql() and do some minor C++
1165 formatting as well as eliminating a number of pointers, simplifing
1168 kes Fix some of the mtx-changer grep commands for tape label readers.
1169 kes Convert a number of bsendmsg into the appropriate send/warning/error
1170 message class calls.
1171 kes Suppress the using database message in the .sql command.
1172 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1174 kes Add context menu for floating a window.
1175 kes Some minor cleanup and name changes in qt-console
1176 kes Add doing mt setblk 0 in Win32 mtx-changer.
1177 kes Apply Martin's bug fix to move definition of ENODATA for
1179 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1180 sqlite2 and sqlite3.
1182 kes More pruning cleanup.
1183 kes Turn on wait_for_drive by default in mtx-changer.
1184 kes Turn on Batch insert code by default as it now passes regression.
1185 kes Add ./configure --enable-bat to enable building of Bat.
1186 No install yet though.
1188 kes Implement a new .sql command for bat.
1189 kes Implement code to turn off pruning in obtaining the next volume.
1190 Pruning is turned off for the status dir command, but turned on
1191 for SD requests and for the list nextvolume command.
1193 kes Correct Qmsg() that was not updated correctly when committing a
1194 previous change (probably the recent TLS patch).
1196 kes Write new subroutine is_volume_purged() that explicitly checks
1197 if the Volume is purged, and if so marks it as such. This should
1198 resolve problems reported about needing to mount twice to recycle
1200 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1201 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1202 amount of duplicated code.
1203 kes Do volume pruning only for the Media Type desired (reduces pruning time
1204 if multiple Media Types are in the same pool).
1205 kes Implement more detailed info in the Job report for the Bacula version
1207 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1209 ebl Add bbatch tool to bench database and insert mode.
1210 Fix sql quote stuff in batch mode
1211 Fix sql stuff for mysql
1213 kes Correct problems with am/pm scheduling. Fixes bug #808.
1214 kes Implement new prunning code that prunes up to 1000 jobs at
1215 the same time. The same technique can be applied to a number
1216 of other prune/purge subroutines.
1217 kes Add an insanity check when starting a new tape job to ensure
1218 that the tape position has not been changed. If so fail the
1220 kes Fix Win32 build for dlls to add the folllowing:
1221 src/lib/bsock.c -- new file with new entry points
1222 src/lib/dlist.c -- new entry points
1223 src/cats/sql_create.c -- new entry point
1224 src/cats/sql_cmds.c -- new DATA item exported
1226 ebl batch mode cleanup bscan-test is ok now.
1227 kes Implement SD code to check length of disk volume before appending.
1229 kes Correct return status on db_batch... routines.
1230 kes Add call to db_write_batch_file_records() to migration code.
1231 ebl Fix AfterJob timing
1232 kes Move the checking of the database in initializion of the Director
1233 to after we drop privileges. This avoids the need for both root
1234 and bacula access to the DB.
1235 kes Correct a misplaced variable definition in src/filed/backup.c
1236 kes Correct how the new batch insert db_create_attributes_record()
1237 uses the arguments. Caused a seg fault in bscan.
1238 kes Implement lock() and unlock() methods in DEVICE class.
1239 Implement block() and set_block(xx) methods in DEVICE class.
1240 kes Modify bnet_connect() so that it uses time() to check for the
1241 wait time expiring (on some OSes, some system calls may not
1242 return immediately).
1243 kes Modify Verify to obtain the previous JobId when it is actually
1244 running rather than at schedule time (as it was in 1.38.x).
1245 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1247 kes When checking pid in pid file, continue running if the pid is
1248 the same as ours. This occurs on IRIX after a system crash.
1251 kes Extend new GUI API.
1252 kes Make the ua structure a class, and implement send_msg(),
1253 error_msg(), warning_msg(), and info_msg().
1255 kes Apply fix from for building wx-console on the Mac from
1257 kes Implement new select mechanism for GUI programs.
1258 kes Reorganize initialization of stackedWidgets in bat.
1260 kes Add updated nagios plugin supplied by Christian Masopust.
1262 kes More bat implementation.
1263 kes File migrate bug with Pool Occupancy using mediaid instead
1264 of jobids. Fixes bug #795.
1265 kes Fix orphaned buffers in filed backup and verify due to
1266 crypto buffers not freed during errors. Fixes bug #789.
1267 kes Extend new GUI api code to tree commands.
1268 kes Ensure that tree and dot commands check console ACLs.
1269 kes Permit marking directory with trailing slash.
1270 kes Allow 20 console connections (instead of only 10).
1272 kes Add smartctl call to bacula-sd.conf as an example of getting
1275 kes Modify jobq.c to let simultaneous restore jobs run. This may
1276 cause them to fail if they cannot get a drive.
1277 kes Add Client Connect Wait to Storage daemon to permit users to
1278 modify the time the SD waits for a FD connection.
1280 kes Correct virtual changer check which was backwards. This caused
1281 volumes to be unloaded into slots already occupied.
1283 kes Apply Command ACL filter to JobId list in restore command.
1284 kes Correct typeo in var.c patch.
1286 kes Don't let Bacula prune File or Job records for the current Job.
1287 kes Fix variable substitution pad + inc bug reported (with patch)
1290 kes Correct SQLite log table index as reported by Luca Berra.
1292 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1294 kes Begin implementing new comm signals for API.
1295 kes Fix a few places in lib/message.c where the open fd may
1297 kes Continue implementing lib/bsock.c (real class). Make jcr,
1298 who, host, and port private. There are new methods to access
1299 them for non-class use. This required touching a number of files.
1301 kes Add LANG=C to autoconf/randpass so it works with languages other
1302 than English. Fixes bug #788.
1304 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1306 You will not be able to generate Include/Exclude list any more.
1307 It will be fixed soon.
1308 If you want to use this, you can apply
1309 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1311 kes Restore of sockets created false error messages because Bacula
1312 no longer restores sockets, but the code was still trying to
1313 set the attributes on a non-existent file. Reported by a user.
1314 ebl finish RecyclePool feature
1315 Media will takes Pool.RecyclePool
1316 when moving from Scratch to a Pool or when user will do
1317 update volume=xxx frompool
1318 To use it, add RecyclePool = aPool to your Pool resource
1321 RecyclePool = Scratch
1325 kes Expand new BSOCK class adding signal() and new BNET signals.
1326 kes Begin enhancing the dot commands adding a new API function
1327 that returns more information and will make it easier
1328 to interface to the Director from a program.
1330 kes Make DEVICE fd private. Its new name is m_fd, and can be
1331 obtained with dev->fd() outside the class. This is the
1332 first of many DEVICE members to be made private.
1333 kes Implement Michael Renner's idea on having a virtual disk
1334 changer. I made some minor modifications (e.g. I did not
1335 implement the Virtual Changer directive, but simply set
1336 the Changer Command to an empty string.
1338 kes Implement a BSOCK send() method that writes the whole record
1339 in a single write() request rather than in two.
1340 ebl add update volume=xxx recyclepool=yyyy
1341 volume takes recyclepool from pool when using update volume=xxx from pool
1343 kes Fix encryption deblocking bug, which caused some restored files
1344 to be truncated. This fixes bug #763.
1345 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1346 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1348 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1349 ebl Use btime_t instead of uint64_t in media patch.
1351 kes Optimize the use of the database a bit in the Status dir command.
1352 Only open it when needed, ensure that if any previous database
1353 was opened, it is closed.
1355 kes Correct VolCatBytes bug from media patch.
1356 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1357 in the case of orphaned records.
1358 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1359 and File records in 300K chunks to be more efficient. This
1360 idea came from Juan Luis Frances (if I remember right).
1361 kes Apply Eric's scratch patch that moves a purged Volume to
1362 the RecyclePool. Question: how is RecyclePool set? what
1363 happens to the ScratchPool?
1364 kes Apply Eric's media patch that collects read/write media
1365 times as well as byte counts. This patch requires a
1366 simultaneous upgrade of the DIR and SD. Note, there
1367 should be some way to turn off timing. I'm not sure
1368 times are in Bacula units.
1369 kes Apply Eric's batch-insert patch.
1371 kes Update projects list.
1373 kes Implement Include/Exclude file lists in FD as dlists using
1374 the new dlistString class. This permits efficiently having
1375 large include/exclude lists and completes project Item 25.
1376 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1377 console is authorized to cancel the job. This fixes bug
1379 kes Modify SD so that the VolCatJobs medium record is updated
1380 at the beginning of a Job rather than the end. This
1381 fixes bug #775 where exceeding MaxVolJobs caused jobs
1383 kes Added a mutex around getting and setting Volume information
1384 so that multiple simultaneous jobs will single thread.
1386 Switch to using Subversion
1387 kes Remove src/pygtk-console/ from configure
1389 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1390 plus the entrypoints.
1391 kes Apply patch supplied that corrects debug print
1392 in canceling jobs for max run time. Supplied as
1393 part of bug #621, which was previously fixed.
1395 kes Test on job_canceled() and sd_msg_thread_done inside
1396 loop starting the message thread to avoid a race condition.
1398 kes Remove rl_catch_signal from console.c as it conflicted
1399 with the header definition. Fixes bug #765.
1400 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1402 kes Clarify some stored/acquire messages to indicate if the
1403 problem is with read or append.
1405 kes Fix memory leak with storage ids in cats/sql_get.c
1406 kes Terminate watchdog earlier to avoid reference to released
1407 memory -- reported by Jason Austin.
1408 kes Move closing the database from jobq.c to the director daemon
1409 termination routine. This fixes memory leaks for shadow jobs
1410 (i.e. migration jobs).
1411 kes Free up the unique jobid chain items in migrate.c. This fixes
1412 a memory leak problem.
1413 kes Convert some ugly looking for statements to use foreach_alist
1414 in findlib/find.c. This will facilitate converting the structures
1415 to use dlist (for large include/exclude lists).
1416 kes Fix a bug in the btree.c and btree.h routines, then rename them
1417 rblist and add them to be built in src/lib. Include some new
1418 methods written by Rudolf Cejka that make the code more readable
1419 (hides some of the ugly casting).
1420 kes Add set_next() and set_prev() methods which make the code much more
1421 readable. Also add a new dlistString class that facilitates storing
1422 strings in dlists. To be used in the large include/exclude lists.
1423 kes Make some trivial modifications to lib/tree.h that use rblist
1424 rather than dlist for storing the tree links. This was suggested
1425 by Rudolf Cejka. The result of this is that the restore tree now
1426 uses red-black binary trees rather than simple linked lists. This
1427 should give rather dramatic speed improvements for directories
1428 contining large numbers of directories/files (more than 10000).
1430 kes Fix maxruntime bug #621.
1432 ebl Implement the include JobID in spool file name project.
1433 kes Reorder projects file in order determined by Jan 2007 vote.
1434 kes Implement item #12 on project list -- quick release of FD by
1436 kes Fix open of SQLite3 db where user does not have write permission
1437 so that DIR does not crash. Fixes bug #761.
1439 kes Add back missing @ in Win32 Makefile.
1440 kes Change 'Device not configured to autolabel' from INFO
1442 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1443 which should restart an indefinite # of times.
1444 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1445 other DIR specifications.
1447 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1448 Fix path quoting in SQLite scripts.
1449 Fix problems with SHGetFolderPath.
1451 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1453 kes Fix Job restart on error bug that promotes an Inc to a Full
1454 backup. This should fix bug #755.
1455 kes Add qt-console and first cut of code.
1459 kes Fix Bacula->Documentation link on Win32 to point to index.html
1460 instead of bacula.html. Fixed bug #750.
1461 kes Return JobId in db_get_job_record() when JobId==0. This should
1463 kes Do not release source pointers when restarting a failed job.
1465 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1466 This *should* fix bug #747.
1467 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1470 kes Modify USTORE constructor to set an empty store_source string,
1471 and don't copy the store_source string in a cancel. Hopefully
1472 this will fix Arno's seg fault, bug #744.
1473 kes Add back code to disable conio in configure. Fixes bug #743.
1474 kes Correct the Options scanner in the FD to correctly handle
1475 SHA1 option, which was eating the next option. Reported by
1477 kes Add code to indicate when the SD is spooling, spool wait, and
1478 despooling as requested by Alan Brown.
1480 Version 2.0.0 released: 4 January 2007