1 Technical notes on version 2.2
5 kes This patch fixes the status command to include the formating string for
6 JS_AttrInsterting. It fixes bug #1021.
7 kes This patch should fix the Mac OS X build problem on the latest
8 Darwin, where sys/types.h was not included correctly (apparently
9 due to a change in the Mac headers). The solution was to explicitly
10 ensure that it is defined for the ./configure.
11 This patch also has a rebuild of configure that includes the Debian
12 qt4 kludge (look for alternate qt4 names).
13 This patch fixes bug #1020.
14 kes This patch should ensure that queued messages to the console are
15 displayed as soon as possible. It should fix bug 1007, but has been
18 kes This patch fixes the infinite loop when trying to increase the
19 maximum number of volumes in a Pool during the add command.
20 This patch fixes bug #1008.
24 kes Get fix for joblist bug in bat from trunk.
26 kes This patch fixes bug #1003 where putting the message output from
27 a Verify job into the catalog results in a recursive loop. The problem
28 seems to show up only with postgresql (to be verified).
30 kes Fix bug #942 where lots of emails where generated when the heartbeat
31 interval was low and Bacula wanted a different tape from the one in
34 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
35 which was updated during a restore (or a reading migration) bug #982
37 ebl Use qmake-qt4 instead of qmake when available (debian system).
39 kes Add a security warning to src/cats/make_catalog_backup.in indicating
40 that passing the password via the command line (arg 3) is insecure.
41 This responds to bug #990 (it doesn't fix it).
42 kes Apply 2.2.5-postgresql-errors.patch
43 kes Remove unneeded File table index on JobId, which is already
44 present as the first index of another multi-index.
46 kes Set default debug_level to zero. This corrects bugs #991 and #993.
47 kes Fix a crash in bat when it cannot connect to the Director for example
48 if the Director is not running.
50 kes Activate Close button on tray-monitor window. This fixes
53 kes Fix spurious warning message printed when creating a volume with
54 a LabelFormat. This fixes bug #976.
58 kes Add JobId in place of Job name in all the Jmsg() output.
59 kes Correct the APP_DESC for the Win32 storage service (remove an e).
61 kes Add new SD despooling attributes and Dir inserting attributes
62 job status codes. This fixes bug #961.
63 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
65 kes Fix doc issue. This fixes bug #963.
66 kes Fix listing performance problems in bat. Pointed out by
68 ebl Fix replace on restore. This fixes bug #969
69 kes Fix bat code that tests for Win32. This should fix bug #968
70 kes Query 5 list wrong Vol after migration. This fixes bug #960
72 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
73 in back porting from 2.3.x
75 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
76 The details are included in the notes in this file.
78 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
79 messages; it fixes a problem opening the SQLite3 database when multiple
80 simultaneous jobs were running; it fixes a bug with certain versions of
81 MySQL where batch inserts failed because of table name character case
82 (upper/lower) differences.
83 kes Fix race condition that drops final block written to volume.
84 This happens in rare cases with multiple simultaneous jobs
85 when the Volume fills. This fixes bug #964. May be related
86 to bug #935 and possibly #903.
88 kes Fix FD->SD authorization failure, which was due to spurious
89 wakeups from a pthread_cond_timedwait(). Simply check the
90 predicate before continuing. This fixes bug #953
91 dvl Add new configuration item --archivedir
92 dvl Adjust regression tests to use tmp not /tmp. This will allow
93 multiple concurrent runs of the regression tests.
95 kes Eliminate more strerror() and replace with bstrerror().
96 kes Remove BSD getopt and replace with unrestricted IBM version.
97 kes Fix Win32 build for changed calling sequences.
99 kes Fix FD->SD authorization failure, which was due to spurious
100 wakeups from a pthread_cond_timedwait(). Simply check the
101 predicate before continuing. This fixes bug #953.
102 kes Add const char where needed (more to do).
104 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
105 kes Don't overwrite error message in check_tables_version.
107 kes Unlock batch insert tables with same calls used elsewhere.
108 kes Allow starting 59 jobs a second.
109 kes Make SD session key more random.
110 kes Add retry for SQLite opening db if it fails. Probably helps
112 kes Suppress extra error messages during batch insert failure.
114 kes Put some FD auth code on dbglvl rather than fixed.
115 kes Return insert attributes error message in db msg buffer to avoid
116 false error messages. Helps fix bug #966.
117 kes Separate batch init error messages. Probably helps fix bug #966.
118 kes If Dir gets an error during inserting attributes, cancel SD.
119 This reduces unnecessary error messages.
121 ebl Cleanup batch insert code. Probably fixes bug #965.
123 kes Turn off some code when batch insert not enabled.
124 kes Edit FD name in connect error messages.
126 kes Add code to handle tray monitor separated from Win32 FD.
127 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
129 kes Fix ANSI tape labeling. This fixes bug #954.
130 kes Increase the max block size to 4MB fixes bug #957.
131 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
132 is not properly mounted (recognized) during a poll.
133 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
134 Job that has differences reports Verify OK.
135 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
137 Release Version 2.2.4
139 kes Increase size of name string when FD making connection to SD.
142 kes Add waits to multiple exit detection code to try to force pid
143 file to always be deleted.
144 kes Restore good dev.tar.gz to rescue set appropriate binary property.
146 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
147 trying to switch drives by checking for blocking before unblocking.
149 kes Cancel storage daemon in all cases where FD reports error. This
150 should fix virtually all cases of bug #920.
152 kes Fix error message that was clobbered when Dir tells SD it does not
153 have write permission on Volume. This should fix a minor point
154 in bug #942, but not the main problem.
155 kes Add code to cancel job in SD if FD connection fails. This should
157 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
158 kes Fix migration code to get correct Volume name with multiple volumes
159 by skipping |. Fixes bug #936.
160 kes Implement patch supplied by Landon to fix bug #944 where using
161 TLS with bconsole uses 99+% of the CPU.
162 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
164 kes Move patches into patches directory.
166 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
169 ebl Using "m" in bconsole will show messages like before,
170 and not memory usage.
172 Release Version 2.2.3
173 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
176 kes Fix bug #935, and probably also bug #903 where files were not
177 restored. MediaId was not properly set in JobMedia record after
180 kes Add ./configure search in qwt-qt4 for qwt package
181 kes Apply Martin Simmons patch that should turn off the new API usage
182 when batch insert is turned off allowing building on older
185 Release Version 2.2.2
187 ebl Detect if new PosgreSQL batch insert API is present.
188 kes Correct incorrect mempool call causing Director crash.
189 sb Update spec files for 2.2.1 release
191 Release Version 2.2.1
193 kes Update POTFILES.in
194 kes Cleanup a few underquoted AC_DEFUNs in configure
195 kes Apply patch from Martin Simmons that adds a test for va_copy to
198 kes Fix bug #921 by increasing the number of tries to create a new volume
200 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
201 can be called multiple times. Implement a version for machines
202 without va_copy() that gets a big buffer.
204 kes Integrate more portable zone offset code into bsmtp.c
205 Submitted by Attila Fülöp.
207 kes Fix bad SD->FD return status reported by
208 (James Harper) <james.harper@bendigoit.com.au>
209 ebl Fix a bug in read_close_session which return random status
210 thanks to James Harper
212 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
213 and directory names during restore of single file/directories.
214 kes Add sanity checks to .sql command when string is empty. Hopefully
215 that will resolve Dirks Director crash.
217 kes Apply patch submitted by Martin Simmons that corrects a seg fault
218 in the bsmtp chat subroutine when debug is >= 10.
220 kes Fix Director crash when running bat SQL queries.
221 kes Add David's notes on Item 8: Copy pools.
223 kes Rework projects file to be current and ready for a vote.
224 kes Enhance lex scanner error message.
226 kes Tweak LICENSE file to mention BSD code.
227 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
228 if specified on the ./configure.
229 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
230 This class is intended to allow us to open a second bsock to the
231 Director while in the restore subdialog.
233 kes Fix configure to create bat Makefile before creating dependencies.
234 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
235 kes Add a tooltip to the tray monitor.
236 dvl Set the Director's PID file before dropping privs. This fixes
239 kes Update AUTHORs file
240 kes Increase the default max concurrent jobs to 20 in FD and SD to
241 correspond with the default .conf files.
242 kes Rewrite the Win32 service routines. This eliminates the 3 copies
243 some different, of the same file created by RN when porting the
245 kes Rearrange some of the Win32 directories and the placement of the files
247 kes Set DEVELOPER flag in version.h
249 ========================================================================
250 Release Version 2.2.0
252 kes Apply a second doc patch from Marc.
253 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
254 improves the tips section that discusses how to setup multiple
257 kes Update bat README file.
258 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
259 corrects a typo in the Recycle status check in db_find_next_volume().
260 This will probably fix a number of annoying problems with multiple
262 kes Modify most of dird/msgchan.c to use bsock class calls rather than
263 bnet calls -- no functionality change.
265 kes Modify the Verify output to specify if files are missing on
266 the Volume(s) or disk. Fixes confusion in bug #916.
267 kes When more than one Volume is read in a migration job, the last
268 Volume bytes reported are from the last read volume rather than
269 the last written volume. Fixed. This fixes bug #910.
270 kes Fix display of Recycle flag after update volume=foo recycle=yes.
271 It previously printed New Recyle flag is: no. This fixes bug
274 kes Correct seg fault when switching tape drives during restore.
275 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
276 be used until after 2.2.0 release.
278 kes Remove fnmatch() in SD that permitted wild card specifications.
281 kes Fix %g in filename returned by SQL for browse tree reported by
283 kes Fix configure so that it puts config.out in the cwd rather than
285 kes Attempt to fix the locking problem reported by Eric in bug #906.
286 kes Make berrno class to leave errno unchanged after constructor call.
287 kes Make bnet_server use the heap rather than the stack to allocate
288 its socket fd pointers to avoid a crash at termination. Problem
289 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
291 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
292 and putting it in depkgs-qt along with Qt4.3.
294 kes Rework code in acquire.c that switches drives for reading when
295 the Media Type does not match. This should fix bug #906
297 ebl Fix a director segfault during job setup #907
298 kes Correct seg fault in postgresql when first operation returns no
299 rows. Fixes Dirks File browser problem seg fault with bat.
301 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
302 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
305 kes Implement PopUp YES/NO dialog for bat.
307 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
309 kes Correct RunScript to terminate job in FD on failure.
310 kes Change abort_on_error and AbortJobOnError to fail_on_error
311 and FailJobOnError in RunScripts.
312 kes Minor tweaks of code formating in RunScripts, principally to
313 avoid depassing 80 columns.
315 kes Eliminate one #ifdef Win32 in bsmtp
316 kes Implement grow tool to grow a file for testing very large databases.
317 kes Add big-vol-test to test Bacula seeking with > 5GB.
320 kes Modify find_next_volume() to return all values in Media record.
321 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
325 kes Update Release notes
327 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
328 Warning, in previous beta version, all media get from scratch keep their
331 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
332 This should fix bug #842. Made a note to look at removing the temp
333 files at the end of the install.
334 kes Add ability to mount and unmount a file device providing it is
335 marked as being removable and has the appropriate mount and unmount
336 commands defined in the Device resource. This fixes bug #830.
337 kes When applying a storage override, release all previous storage
338 definitions rather than just prepending the new storage.
339 This should prevent a good deal of confusion.
341 kes Implement ./configure search for qwt libraries.
343 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
344 Win32 FD. This should fix bug #893.
345 kes Remove an unnecessary beep in Win32 init code.
346 kes Update copyright dates in Win32 executable about boxes.
347 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
348 code with a BSD getopt.c and getopt.h.
349 kes Remove sched.h from the Win32 compat directory -- not used.
350 kes Remove the Exit menu item from the Win32 tray monitor. If you really
351 need to shut it down, do it through the services panel or the command
353 kes Remove some inappropriate Bacula FSFE copyrights.
354 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
355 kes Fix regress config non-portable test as pointed out by
356 Florian Heigl <florian.heigl@gmail.com>
357 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
358 as pointed out by Florian Heigl <florian.heigl@gmail.com>
360 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
361 Reported by Frank Sweetser.
365 kes Fix client-only build.
366 kes Integrate client-only fixes for bsys (initgroups) and conio from
367 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
368 kes Make arguments to get_scratch_volume() in same order as other
370 kes Rework the prune_volumes() subroutine so that after purging and
371 no volume found in desired pool, it will check for a scratch
372 volume. This prevents recycling the whole scratch pool.
373 kes Add code to status storage to print boffset_t (largefile support).
375 kes Move qwt (Graphics libarary for Qt4) to depkgs.
376 kes You now need a --with-qwt=<dir> to be able to build bat.
377 kes Update src/win32/cats/bacula_cats.def to include the new
378 db_get_query_dbids() call on Win32.
380 kes Correct a problem when selecting a scratch volume and moving
381 it to another pool that lost some columns.
382 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
383 kes Enhance Autochanger error messages to include Volume and device name.
384 kes Rework prune_volumes() code to take account of InChanger flag,
385 and to handle recycling volumes going to the Scratch pool and
386 current pool because the RecyclePool directive.
387 kes Implement a better and more efficient db_get_query_dbids() to
388 handle creating and passing back a list of DBIds.
392 kes Start work on new more efficient DBId subroutine. First use
393 will be for recycling volume to Scratch inchanger.
394 kes Increase number of JobIds in pruning from 1000 to 10000.
395 This to be replaced by above routine.
396 kes Begin implementation of building Qt4 on Win32.
397 kes Correct typo in fix I added for bad TLS shutdown.
398 kes Pull 2.0.3 patches into patches directory.
399 kes Update Release notes. Include qt-console in line count.
400 kes Update Projects file.
402 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
403 bug in migration code where a job that spanned two volumes
406 kes Implement new BST_DESPOOLING blocked state. Change from locking
407 during despooling in SD to blocking. This means that other threads
408 can work with the device structure, in particular the reservations
409 system while despooling.
411 kes Fix return in reservation message queue that missed clearing
412 the jcr lock (implemented 26Jun07 below).
413 kes Rename a number of dev methods to make locking function names
415 kes Document locking in lock.c. Move lock structures to new file
418 kes Move reservations message lock to lock jcr only this
420 kes Move main SD locking code into lock.c (new file).
421 kes Update Win32 build to include lock.c
425 kes Dirk committed the qwt library code for drawing graphs in bat.
426 kes Tweak install of qwt so that it is integrated with ./configure.
428 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
429 out by Eric (my typo).
430 ebl Fix configure.in to get batch mode enable
431 kes Return correct string from authenticate.cpp in bat when connecting
433 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
434 spurious line drops when using TLS.
435 kes Do not file reparse points when restoring a file that already
438 kes Implement Windows reparse points -- similar to directories, but
439 we do not descend into it. This is a first cut. They seem to
440 be backed up, but restore is not yet tested.
441 kes Remove restore_blocking in tls code when shutting a socket to leave
442 it in blocking mode. Hopefully this will fix the encryption bug
443 reported by Frank Sweetser.
444 kes When opening a file for backup, tell the OS that we are going to
445 read it sequentially -- optimization.
446 kes Change variable names in authenticate_director() to not conflict
447 with member names in bat. Caused great confusion with compiler,
450 kes Queue openssl error messages in case of comm problem.
451 kes Do shutdown() call if socket terminated.
452 kes Remove some duplicated code in tls.c
453 kes Move more of the bsock member variables into private and access
455 kes Add Frank Sweetser's tls-test to the regression suite.
457 kes Add Swedish sv.po file
459 kes Don't print clock skew message in FD if less than 3 seconds diff.
460 kes Add a bit of VSS info to status client.
461 kes Implement a first cut of Vista VSS, using Win2003 code.
465 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
466 loaded tape but uses first drive).
467 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
468 This was indeed a Win32 issue.
470 kes Simplify search of autochanger for in-use Volume.
471 kes Fix exit condition of check for in-use volume. kes Remove
472 inappropriate my_postgresql_free_result() in db_close()
474 kes Fix bad return in FD when encryption signature not found.
475 Probably caused a crash.
476 kes Inhibit missing encryption signature error messages for
477 file types where no signature computed.
478 kes Correct inverted check on autochanger in reservation system.
479 kes Tweak debug code in autochanger reservation.
481 kes Add some additional locking in the cats directory in subroutines
482 that modify packet variables called from batch insert.
483 kes Rework how dcrs are allocated. new_dcr() can now be called
484 with an existing pointer, and it will simply clean it up.
485 This allows the reservation system to test various different
486 devices, and will permit easy device changes.
487 kes A bunch of changes all over to handle new new_dcr() calling
489 kes Work more on the Volume management in the SD. Remember Volumes
490 for tape drives and for autochangers (even virtual disk changers).
491 kes When looking at the Volume list to reserve a drive, handle
492 autochanger names correctly by interating through the changer
493 devices. Also call the Director to see if a Volume is suitable
495 kes Fix some bugs in bscan. Make sure all media records are written.
496 Make sure that valid JobMedia records are written for disk files.
497 Previously they were completely wrong.
498 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
499 that the URLs don't change and so that the developers will all
500 work off the same copy. Rebuild from scrach.
501 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
505 kes Fix seg fault in FD from incorrect digest size.
506 kes Fix argument to non-OpenSSL crypto.c subroutine.
510 kes Remove a few malloc()s from the encryption code.
511 kes Use the class calls to bsock in filed/backup.c and restore.c in
512 place of the old bnet_xxx code.
513 kes Implement code that does an on the fly calculation of the
514 signing digest during restore of encrypted files. It makes
515 a best guess at the algorithm, and if it is not correct, will
516 then revert to the old code which reads the file after it is
518 kes Implement at least one missing crypto stream in stream_to_ascii()
519 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
520 #877 where a reload with bad syntax causes Dir to exit.
522 Cut: 2.1.14 beta (not released)
524 kes Do not free a volume on a tape drive until another volume is
525 mounted and read, or the autochanger unloads the volume.
526 This should help the SD re-use volumes that are already mounted,
527 and should fix bug #886.
528 kes Apply patch from user brettedgar that allows gnome2-console include
529 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
530 kes Apply patch from Lucien Weller that fixes day of week calculation
531 because of DST flag problem. Fixes bug #887.
533 kes Move find_next_appendable_volume() to after acquiring a valid device
534 in reserve.c. This fixes bug #864 -- confirmed by reporter.
536 kes Unable to reproduce bug 872. However added additional testing for
538 kes Bug #874 resolved by documenting SQLite limitations.
539 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
540 kes Bug #881 resolved by removing typo in mtx-changer script.
541 kes Made Frank Sweetser's wiki the official Bacula wiki with his
542 approval. Added a link to the wiki on the web page, and implemented
543 a backup from http://paramount.ind.wpi.edu
545 kes Fix update allfrompool to pass pool name.
547 kes Convert to pure GPL v2 license.
548 kes Fix sscanf problems reported by Peter Buschman that caused
549 a bus error on Solaris.
550 kes Rework (simplify) the select prompt in bat.
551 kes Move get_jobid_from_tid() into lib and create a
553 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
554 should definitely fix the problem of lost error messages in the
556 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
557 kes Eliminate tcpd.h from the project. Enclose the #include from the
558 library with extern C ...
559 kes Add print of signal name when a signal is trapped.
563 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
565 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
566 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
567 makes SQLit3 run 30 times faster, though a bit less safe.
568 kes Implement --with-batch-insert in configure and detection of thread
569 safe libraries. It is on by default, but turned off if no thread
570 safe library (e.g. SQLite 2) is available.
572 kes Fix Bacula PostgreSQL buffer overruns.
573 kes Do better checking for NULL results returned from PostgreSQL;
574 implement retry for failed queries; clear results buffer after
575 failed query. Hopefully this will correct the PostgreSQL failures.
577 kes Implement algorithm to handle only one appendable volume with
578 Prefer Mounted Volumes = no.
579 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
580 returned from a query.
581 kes Make volume lock recursive.
582 kes Implement an additional volume reservation algorithm that
583 starts by considering all reserved volumes then uses the
584 old brute force algorithm of searching the resources to
585 find a suitable device.
586 kes Add new reservations debug code and refine the old code.
587 kes Update the win32/dll/bacula.defs file.
589 kes Tweak reservations algorithm to permit a few more cases, i.e.
590 volume reserved, but on different drive, ...
591 kes Enhance SD status to include Pool and Media Type for drive in a
592 more readable format (a bit longer).
593 kes Fix PostgreSQL double free.
595 kes Minor refactoring of restore decryption code.
596 kes Add code to smartall.c to detect double free of a buffer.
598 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
599 so that bsmtp will create a correct email address (mailbox only).
600 kes Modify 'memory' command so that the buffers are listed as 'In use'
601 to avoid confusion with Orphaned buffers.
602 kes I reworked the OpenSSL include/lib flags to be handled in
603 the standard Bacula way, which should fix bug #863 concerning
604 non-standard OpenSSL libraries.
606 kes Implement Help Browser window for bat.
607 kes Fix reload bug that reset StorageId to zero.
609 kes Fix TLS #ifdefing when TLS turned off.
610 kes Ensure that when labelling a tape with Slot=0 that InChanger
612 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
614 kes Add StartTime to final uar_sel_jobid_temp query so that we can
615 add DISTINCT (required by PostgreSQL).
616 kes Implement BSOCK authenticate_director() method. Eventually will
617 authenicate all daemons.
618 kes Move several more functions into the BSOCK class.
620 kes Add code to tell the OS that we no longer need a cached
621 file that we were reading. In findlib/bfile.c. Also,
622 only cache files that we are reading. Thanks to
623 Tobias Oetiker <tobi@oetiker.ch> for the idea.
624 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
625 kes Implement script to automatically generate cats and dll .def
627 kes Update README.mingw32 to include new .def file generation.
628 kes Correct typo in UTF-8 error message as reported by:
629 jhernandez <julianhernandez@gmail.com>
630 kes Add additional sm_check() code on debug level 1.
631 kes Set default debug level to 1.
632 kes Trap SIGABRT in attempt to get traceback.
634 kes Reduce bat connect timeout from 30 to 15 seconds.
635 kes More restructuring and implementing BSOCK class in place of
637 kes Remove a few unnecessary malloc() tests in crypto code.
638 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
639 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
640 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
642 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
644 kes Fix Verify InitCatalog. The attributes were not pointing to the
645 correct saved location.
646 kes Implement message callback so that GUI is sure to get all
647 daemon messages. Currently displayed in a dialog in bat.
648 kes Ignore SIGUSR2 (Bacula timer) in bat.
649 kes Apply regress patch from bug #859 to allow regress to work
650 with Solaris compiler.
652 kes Begin adding TLS support to bat.
653 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
654 clean up lex.c and make it more readable.
656 kes Move more bnet functions into the BSOCK class.
657 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
658 kes Complete change of berrno strerror() method to bstrerror()
662 kes Cleanup incorrect email addresses in bsmtp.
663 kes Make bat display initial messages rather than discard them.
665 kes First cut of adding .mod to the run command.
666 kes Implement auto display of messages in bat.
667 kes Enhanced preferences to allow all Bacula output to be
670 kes Try to make bsmtp date routines more generic.
671 kes Fixed bug #856 autochanger documentation.
672 kes Rework bsmtp date editing for Win32. This fixes bug #854.
673 kes Add new cats entry point so Win32 builds.
675 kes Attempt to fix bsmtp date editing on OSes without %z editing.
677 kes Do better checking for the MySQL 64 bit libraries looking for both
678 .a and .so libraries.
679 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
680 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
681 kes Require the thread safe version of MySQL during configure. Thanks
682 to Andre Noll for pointing this out.
683 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
684 continuing in migration code.
685 kes Apply implementation of tray-monitor font derived from gnome-console
686 submitted by Andreas Piesk <a.piesk@gmx.net>
688 kes Eliminate important memory loss in SQLite
689 kes Fixed the batch insert MySQL thread specific data that was not
690 being freed. See cats/mysql.c:db_thread_cleanup().
691 kes Fix restore before command.
692 kes Convert old hdr.name to name() in a few places.
693 kes Implement update jobid command.
694 kes Return all time_t dates in db_get_job_record()
695 kes Stop watchdog in SD earlier.
696 kes Put Pool just after Storage in please mount message.
697 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
700 kes Update the po files.
701 kes Fix Verify InitCatalog by making it cache attributes.
703 kes Change name bacula-bat to bat for man 1 page to correspond to
705 kes Check for client and store NULL pointers in status command. This
707 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
708 kes Fix sign extended editing of %p.
709 kes Clean out a little old #ifdefing in cats/mysql.c
711 kes If time diff between DIR and FD is more than 600 seconds convert
712 INFO message to WARNING.
713 kes Implement heap size display in status for all daemons.
714 kes Attempt to fix MySQL db open memory loss (not successfull).
715 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
716 kes Eliminate memory loss in MySQL (possibly other SQLs) during
717 Query. This looks like a MySQL but but by doing extra releases,
718 the memory goes away. This should fix bug #847.
720 kes When backup fails, cancel SD before waiting for sd termination.
721 kes If SD is waiting for FD to connect during cancel, wake up the
723 kes Fix fsf code so that errno is correctly reported.
724 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
726 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
727 so that Bacula doesn't later stumble into a seg fault.
728 kes Use the term Restore Client in the restore Job report.
729 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
730 the original job's FileSetId.
731 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
732 spooling in migration jobs. Not yet tested.
733 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
734 reading conf file from a pipe. However, do it with open_bpipe()
735 rather than popen. Not yet tested.
737 kes Fix an ugly bug where the VolCatBytes were getting updated
739 kes Implement bconsole memory command that prints current memory
740 usage, plus smartalloc dump.
741 kes Clarify some error messages in backup, admin, and migrate.
742 kes Shrink label dialog to smaller size.
743 kes Invert Cancel OK buttons on restore to be OK Cancel.
744 kes More strerror() to bstrerror() conversions.
746 kes Start implementing bstrerror() in place of strerror().
747 kes Stripping path -- seems to work.
749 kes Prevent door and port files from being restored (mostly
751 kes Free an unreleased buffer in compat code.
752 kes Change console Job name from *Console* to -Console- to eliminate
753 Win32 filename problems. Put Win32 path separator when creating
754 Console file. This fixes bug #846.
755 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
757 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
759 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
760 to force Win32 error message.
762 kes First cut strip path. The data should be passed to the FD,
763 but nothing is done with it yet.
764 kes Enhance the digest and signature routines in the crypto
765 library to accept a JCR and to use it to print error messages
766 so that they will go in the Job report rather than the daemon's
768 kes Simplify some of the verify signature code.
769 kes Simplify a few of the alternative returns in the signature
772 ebl Use only POSIX regex instead of GNU regex in breg.c for
773 File relocation. It fix broken freebsd compilation.
774 kes Convert all other Dir files to use new ua class message
776 kes Tentative fix for missing digest signature in bug 807.
777 kes Correct handle problem in new win32_ftruncate routine.
778 kes Convert ua_purge.c and ua_update.c to use new ua class
779 message routines for bat.
781 kes Correct incorrect installation of LICENSE in Win32 installer.
782 kes Display LICENSE at the beginning of the Win32 install.
783 kes Attempt to correct the need for the png files to be installed
785 kes Reapply my bat.conf install script in qt-console. I think I
786 editted bat.pro instead of bat.pro.in and it was lost.
787 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
788 the /var/lock/subsys for subsysdir. Also corrects typos in the
791 kes First cut update job.
792 kes Correct configure to include qmake of src/qt-console directory.
794 kes Make restore job yes/mod/no print in one command so GUI works.
795 kes First cut implementing backup and restore client.
796 kes Correct editing in Verify output that caused a seg fault.
798 kes Insure that bat.conf is not overwritten during installation.
799 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
800 while I was implementing migration in March 2006 !
802 ebl Cleanup file relocation, using char *RegexWhere instead of
803 char *where + bool where_use_regexp
804 kes Update some manpages and add bat manpage.
805 kes Make a first cut at converting bacula.spec.in for bwx-console
807 kes Apply patch from John Goerzen to add hostname as fourth argument
808 to make_catalog_backup script.
809 kes Fix typos I introduced into bsmtp.c
810 kes Make pm_strxxx() routines handle input of NULL pointer. This
811 is to protect from NULL pointers returned from SQL databases.
812 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
813 kes Add more debug to FIFO code -- fix fifo regression test.
815 kes Implement posix_fadvise in FD, and for reading spool files in SD.
816 kes Add thread timer to bnet_connect() to break from OS if wait time
819 kes Update Win32 build to include new files, new symbols, and
821 kes Implement socket level heartbeat (tcp_keepidle)
822 ebl Commit File relocation patch
823 kes Make bat have 'make install' target.
824 kes Warn during install if old gnome-console binary found.
825 kes Warn during install if old wx-console binary found.
826 kes Add -8 option to bsmtp command line to add content type utf-8.
827 Fixes bug #809. (Character coding problem in bsmtp).
828 kes If < is found in target (from, to, cc) then do not enclose the
829 target in < > in bsmtp. Fixes bug #772 (malformed address).
830 kes When printing certain items in dbcheck, stop after 300000.
831 Fixes bug #822. (dbcheck loops).
832 kes Incorrect status in Dir after waiting for mount with poll set.
835 kes Extend idea of Prefer Mounted Volumes to mean a volume about
837 kes Print waiting to reserve a device every 5 mins.
839 kes Don't call close_part in label.c if tape and relabel.
840 kes Don't free volume if busy in close() -- should help with
842 ebl Fix #824 RunScript bug (After script could be execute twice)
843 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
844 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
845 Add a regression script to test RunScript
847 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
850 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
851 deprecated. No additional bugs will be fixed, and they will be dropped
852 in a future release (probably 2.4.0).
853 kes Change name of wx-console to bwx-console to make it more Bacula
855 kes Change the name of gnome-console to bgnome-console to make it
858 kes Some time in March, a Feature Request with patch from Jorj Bauer
859 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
861 The ability for the director to validate a Client (FD) CN against
862 an arbitrary set of patterns rather than the hostname, with
863 A new 'TLS Allowed CN' set of directives which are implemented
864 in the Client resource. Then pattern matching is used in place
865 of hostname matching against the Certificate's CN. As an example, we
866 have certificates which (a) use a local CA, and (b) have a CN of the
868 kes Add new/changed entry points to Win32 build
869 kes Create unaccepted-projects for projects that are not accepted.
870 kes Simplify locking in the reservations system.
871 kes Add more debug code in reservations.
872 kes Make sure error condition on reserving a volume is handled correctly.
873 kes Correct handling of volume_in_use.
874 kes Correct handling of initializing a device.
875 kes Move handling of broadcasting releasing a device into release_device().
876 kes Correct attaching dcr to dev so that it is only done if device
877 is properly initiated.
879 kes Locking debug level tweaks in SD.
880 kes Tweak new Volume code.
882 kes Add exec external-command [wait-seconds] to bconsole. This
883 executes the external-command. Note! normally external-command
884 should be enclosed in double quotes.
885 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
886 it should normally be off in a production system.
888 kes Implement die command for SD so that we can force it to dump.
889 kes Implement SD lock debug code.
890 kes Implement new algorithm for keeping Volume list in SD. It
891 is now owned by the device.
893 kes Implement new code for freeing in use volumes that should
894 resolve if not all, some of the problems of multiple drive
895 tape conflicts described in bug 801.
897 kes Fix gui/bacula-web/images files in svn.
898 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
900 ebl Fix a bug in batch mode (in string escape)
901 kes Correct migration prune SQL typo that crept in in a
904 kes Move bnet_despool() into class in bsock.c
905 kes Modify job report to include director name and Build OS.
906 kes Move drop root privilege and check_catalog() before fork.
907 kes Add update database scripts (version 9 to 10) to updatedb directory.
909 ebl Check size and age of each file after its backup to see if
910 it has changed during backup, if 'checkfilechanges' is set.
911 The FD will do an extra check (stat(2)) after
912 each file backup. mtime, ctime and size are compared with
913 'before backup' information. If time or size mismatch, an
914 error message will be generated. You must upgrade FD to use it.
916 kes Make database name and user configurable
917 --with-db-name=xxx --with-db-user=xxx
918 kes Add back database type to message.c for debugging.
920 kes Implement dir_sql() which issues an SQL query.
921 kes Modify bat medialist to use dir_sql() and do some minor C++
922 formatting as well as eliminating a number of pointers, simplifing
925 kes Fix some of the mtx-changer grep commands for tape label readers.
926 kes Convert a number of bsendmsg into the appropriate send/warning/error
928 kes Suppress the using database message in the .sql command.
929 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
931 kes Add context menu for floating a window.
932 kes Some minor cleanup and name changes in qt-console
933 kes Add doing mt setblk 0 in Win32 mtx-changer.
934 kes Apply Martin's bug fix to move definition of ENODATA for
936 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
939 kes More pruning cleanup.
940 kes Turn on wait_for_drive by default in mtx-changer.
941 kes Turn on Batch insert code by default as it now passes regression.
942 kes Add ./configure --enable-bat to enable building of Bat.
943 No install yet though.
945 kes Implement a new .sql command for bat.
946 kes Implement code to turn off pruning in obtaining the next volume.
947 Pruning is turned off for the status dir command, but turned on
948 for SD requests and for the list nextvolume command.
950 kes Correct Qmsg() that was not updated correctly when committing a
951 previous change (probably the recent TLS patch).
953 kes Write new subroutine is_volume_purged() that explicitly checks
954 if the Volume is purged, and if so marks it as such. This should
955 resolve problems reported about needing to mount twice to recycle
957 kes Rewrite pruning algorithm to do more work in the SQL engine, and
958 to pass a list of JobIds to be deleted to SQL. Also, minimize the
959 amount of duplicated code.
960 kes Do volume pruning only for the Media Type desired (reduces pruning time
961 if multiple Media Types are in the same pool).
962 kes Implement more detailed info in the Job report for the Bacula version
964 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
966 ebl Add bbatch tool to bench database and insert mode.
967 Fix sql quote stuff in batch mode
968 Fix sql stuff for mysql
970 kes Correct problems with am/pm scheduling. Fixes bug #808.
971 kes Implement new prunning code that prunes up to 1000 jobs at
972 the same time. The same technique can be applied to a number
973 of other prune/purge subroutines.
974 kes Add an insanity check when starting a new tape job to ensure
975 that the tape position has not been changed. If so fail the
977 kes Fix Win32 build for dlls to add the folllowing:
978 src/lib/bsock.c -- new file with new entry points
979 src/lib/dlist.c -- new entry points
980 src/cats/sql_create.c -- new entry point
981 src/cats/sql_cmds.c -- new DATA item exported
983 ebl batch mode cleanup bscan-test is ok now.
984 kes Implement SD code to check length of disk volume before appending.
986 kes Correct return status on db_batch... routines.
987 kes Add call to db_write_batch_file_records() to migration code.
988 ebl Fix AfterJob timing
989 kes Move the checking of the database in initializion of the Director
990 to after we drop privileges. This avoids the need for both root
991 and bacula access to the DB.
992 kes Correct a misplaced variable definition in src/filed/backup.c
993 kes Correct how the new batch insert db_create_attributes_record()
994 uses the arguments. Caused a seg fault in bscan.
995 kes Implement lock() and unlock() methods in DEVICE class.
996 Implement block() and set_block(xx) methods in DEVICE class.
997 kes Modify bnet_connect() so that it uses time() to check for the
998 wait time expiring (on some OSes, some system calls may not
1000 kes Modify Verify to obtain the previous JobId when it is actually
1001 running rather than at schedule time (as it was in 1.38.x).
1002 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1004 kes When checking pid in pid file, continue running if the pid is
1005 the same as ours. This occurs on IRIX after a system crash.
1008 kes Extend new GUI API.
1009 kes Make the ua structure a class, and implement send_msg(),
1010 error_msg(), warning_msg(), and info_msg().
1012 kes Apply fix from for building wx-console on the Mac from
1014 kes Implement new select mechanism for GUI programs.
1015 kes Reorganize initialization of stackedWidgets in bat.
1017 kes Add updated nagios plugin supplied by Christian Masopust.
1019 kes More bat implementation.
1020 kes File migrate bug with Pool Occupancy using mediaid instead
1021 of jobids. Fixes bug #795.
1022 kes Fix orphaned buffers in filed backup and verify due to
1023 crypto buffers not freed during errors. Fixes bug #789.
1024 kes Extend new GUI api code to tree commands.
1025 kes Ensure that tree and dot commands check console ACLs.
1026 kes Permit marking directory with trailing slash.
1027 kes Allow 20 console connections (instead of only 10).
1029 kes Add smartctl call to bacula-sd.conf as an example of getting
1032 kes Modify jobq.c to let simultaneous restore jobs run. This may
1033 cause them to fail if they cannot get a drive.
1034 kes Add Client Connect Wait to Storage daemon to permit users to
1035 modify the time the SD waits for a FD connection.
1037 kes Correct virtual changer check which was backwards. This caused
1038 volumes to be unloaded into slots already occupied.
1040 kes Apply Command ACL filter to JobId list in restore command.
1041 kes Correct typeo in var.c patch.
1043 kes Don't let Bacula prune File or Job records for the current Job.
1044 kes Fix variable substitution pad + inc bug reported (with patch)
1047 kes Correct SQLite log table index as reported by Luca Berra.
1049 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1051 kes Begin implementing new comm signals for API.
1052 kes Fix a few places in lib/message.c where the open fd may
1054 kes Continue implementing lib/bsock.c (real class). Make jcr,
1055 who, host, and port private. There are new methods to access
1056 them for non-class use. This required touching a number of files.
1058 kes Add LANG=C to autoconf/randpass so it works with languages other
1059 than English. Fixes bug #788.
1061 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1063 You will not be able to generate Include/Exclude list any more.
1064 It will be fixed soon.
1065 If you want to use this, you can apply
1066 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1068 kes Restore of sockets created false error messages because Bacula
1069 no longer restores sockets, but the code was still trying to
1070 set the attributes on a non-existent file. Reported by a user.
1071 ebl finish RecyclePool feature
1072 Media will takes Pool.RecyclePool
1073 when moving from Scratch to a Pool or when user will do
1074 update volume=xxx frompool
1075 To use it, add RecyclePool = aPool to your Pool resource
1078 RecyclePool = Scratch
1082 kes Expand new BSOCK class adding signal() and new BNET signals.
1083 kes Begin enhancing the dot commands adding a new API function
1084 that returns more information and will make it easier
1085 to interface to the Director from a program.
1087 kes Make DEVICE fd private. Its new name is m_fd, and can be
1088 obtained with dev->fd() outside the class. This is the
1089 first of many DEVICE members to be made private.
1090 kes Implement Michael Renner's idea on having a virtual disk
1091 changer. I made some minor modifications (e.g. I did not
1092 implement the Virtual Changer directive, but simply set
1093 the Changer Command to an empty string.
1095 kes Implement a BSOCK send() method that writes the whole record
1096 in a single write() request rather than in two.
1097 ebl add update volume=xxx recyclepool=yyyy
1098 volume takes recyclepool from pool when using update volume=xxx from pool
1100 kes Fix encryption deblocking bug, which caused some restored files
1101 to be truncated. This fixes bug #763.
1102 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1103 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1105 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1106 ebl Use btime_t instead of uint64_t in media patch.
1108 kes Optimize the use of the database a bit in the Status dir command.
1109 Only open it when needed, ensure that if any previous database
1110 was opened, it is closed.
1112 kes Correct VolCatBytes bug from media patch.
1113 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1114 in the case of orphaned records.
1115 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1116 and File records in 300K chunks to be more efficient. This
1117 idea came from Juan Luis Frances (if I remember right).
1118 kes Apply Eric's scratch patch that moves a purged Volume to
1119 the RecyclePool. Question: how is RecyclePool set? what
1120 happens to the ScratchPool?
1121 kes Apply Eric's media patch that collects read/write media
1122 times as well as byte counts. This patch requires a
1123 simultaneous upgrade of the DIR and SD. Note, there
1124 should be some way to turn off timing. I'm not sure
1125 times are in Bacula units.
1126 kes Apply Eric's batch-insert patch.
1128 kes Update projects list.
1130 kes Implement Include/Exclude file lists in FD as dlists using
1131 the new dlistString class. This permits efficiently having
1132 large include/exclude lists and completes project Item 25.
1133 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1134 console is authorized to cancel the job. This fixes bug
1136 kes Modify SD so that the VolCatJobs medium record is updated
1137 at the beginning of a Job rather than the end. This
1138 fixes bug #775 where exceeding MaxVolJobs caused jobs
1140 kes Added a mutex around getting and setting Volume information
1141 so that multiple simultaneous jobs will single thread.
1143 Switch to using Subversion
1144 kes Remove src/pygtk-console/ from configure
1146 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1147 plus the entrypoints.
1148 kes Apply patch supplied that corrects debug print
1149 in canceling jobs for max run time. Supplied as
1150 part of bug #621, which was previously fixed.
1152 kes Test on job_canceled() and sd_msg_thread_done inside
1153 loop starting the message thread to avoid a race condition.
1155 kes Remove rl_catch_signal from console.c as it conflicted
1156 with the header definition. Fixes bug #765.
1157 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1159 kes Clarify some stored/acquire messages to indicate if the
1160 problem is with read or append.
1162 kes Fix memory leak with storage ids in cats/sql_get.c
1163 kes Terminate watchdog earlier to avoid reference to released
1164 memory -- reported by Jason Austin.
1165 kes Move closing the database from jobq.c to the director daemon
1166 termination routine. This fixes memory leaks for shadow jobs
1167 (i.e. migration jobs).
1168 kes Free up the unique jobid chain items in migrate.c. This fixes
1169 a memory leak problem.
1170 kes Convert some ugly looking for statements to use foreach_alist
1171 in findlib/find.c. This will facilitate converting the structures
1172 to use dlist (for large include/exclude lists).
1173 kes Fix a bug in the btree.c and btree.h routines, then rename them
1174 rblist and add them to be built in src/lib. Include some new
1175 methods written by Rudolf Cejka that make the code more readable
1176 (hides some of the ugly casting).
1177 kes Add set_next() and set_prev() methods which make the code much more
1178 readable. Also add a new dlistString class that facilitates storing
1179 strings in dlists. To be used in the large include/exclude lists.
1180 kes Make some trivial modifications to lib/tree.h that use rblist
1181 rather than dlist for storing the tree links. This was suggested
1182 by Rudolf Cejka. The result of this is that the restore tree now
1183 uses red-black binary trees rather than simple linked lists. This
1184 should give rather dramatic speed improvements for directories
1185 contining large numbers of directories/files (more than 10000).
1187 kes Fix maxruntime bug #621.
1189 ebl Implement the include JobID in spool file name project.
1190 kes Reorder projects file in order determined by Jan 2007 vote.
1191 kes Implement item #12 on project list -- quick release of FD by
1193 kes Fix open of SQLite3 db where user does not have write permission
1194 so that DIR does not crash. Fixes bug #761.
1196 kes Add back missing @ in Win32 Makefile.
1197 kes Change 'Device not configured to autolabel' from INFO
1199 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1200 which should restart an indefinite # of times.
1201 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1202 other DIR specifications.
1204 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1205 Fix path quoting in SQLite scripts.
1206 Fix problems with SHGetFolderPath.
1208 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1210 kes Fix Job restart on error bug that promotes an Inc to a Full
1211 backup. This should fix bug #755.
1212 kes Add qt-console and first cut of code.
1216 kes Fix Bacula->Documentation link on Win32 to point to index.html
1217 instead of bacula.html. Fixed bug #750.
1218 kes Return JobId in db_get_job_record() when JobId==0. This should
1220 kes Do not release source pointers when restarting a failed job.
1222 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1223 This *should* fix bug #747.
1224 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1227 kes Modify USTORE constructor to set an empty store_source string,
1228 and don't copy the store_source string in a cancel. Hopefully
1229 this will fix Arno's seg fault, bug #744.
1230 kes Add back code to disable conio in configure. Fixes bug #743.
1231 kes Correct the Options scanner in the FD to correctly handle
1232 SHA1 option, which was eating the next option. Reported by
1234 kes Add code to indicate when the SD is spooling, spool wait, and
1235 despooling as requested by Alan Brown.
1237 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob