1 Technical notes on version 2.3
5 kes Fix configure to create bat Makefile before creating dependencies.
6 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
7 kes Add a tooltip to the tray monitor.
9 kes Update AUTHORs file
10 kes Increase the default max concurrent jobs to 20 in FD and SD to
11 correspond with the default .conf files.
12 kes Rewrite the Win32 service routines. This eliminates the 3 copies
13 some different, of the same file created by RN when porting the
15 kes Rearrange some of the Win32 directories and the placement of the files
17 kes Set DEVELOPER flag in version.h
19 ========================================================================
22 kes Apply a second doc patch from Marc.
23 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
24 improves the tips section that discusses how to setup multiple
27 kes Update bat README file.
28 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
29 corrects a typo in the Recycle status check in db_find_next_volume().
30 This will probably fix a number of annoying problems with multiple
32 kes Modify most of dird/msgchan.c to use bsock class calls rather than
33 bnet calls -- no functionality change.
35 kes Modify the Verify output to specify if files are missing on
36 the Volume(s) or disk. Fixes confusion in bug #916.
37 kes When more than one Volume is read in a migration job, the last
38 Volume bytes reported are from the last read volume rather than
39 the last written volume. Fixed. This fixes bug #910.
40 kes Fix display of Recycle flag after update volume=foo recycle=yes.
41 It previously printed New Recyle flag is: no. This fixes bug
44 kes Correct seg fault when switching tape drives during restore.
45 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
46 be used until after 2.2.0 release.
48 kes Remove fnmatch() in SD that permitted wild card specifications.
51 kes Fix %g in filename returned by SQL for browse tree reported by
53 kes Fix configure so that it puts config.out in the cwd rather than
55 kes Attempt to fix the locking problem reported by Eric in bug #906.
56 kes Make berrno class to leave errno unchanged after constructor call.
57 kes Make bnet_server use the heap rather than the stack to allocate
58 its socket fd pointers to avoid a crash at termination. Problem
59 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
61 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
62 and putting it in depkgs-qt along with Qt4.3.
64 kes Rework code in acquire.c that switches drives for reading when
65 the Media Type does not match. This should fix bug #906
67 ebl Fix a director segfault during job setup #907
68 kes Correct seg fault in postgresql when first operation returns no
69 rows. Fixes Dirks File browser problem seg fault with bat.
71 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
72 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
75 kes Implement PopUp YES/NO dialog for bat.
77 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
79 kes Correct RunScript to terminate job in FD on failure.
80 kes Change abort_on_error and AbortJobOnError to fail_on_error
81 and FailJobOnError in RunScripts.
82 kes Minor tweaks of code formating in RunScripts, principally to
83 avoid depassing 80 columns.
85 kes Eliminate one #ifdef Win32 in bsmtp
86 kes Implement grow tool to grow a file for testing very large databases.
87 kes Add big-vol-test to test Bacula seeking with > 5GB.
90 kes Modify find_next_volume() to return all values in Media record.
91 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
95 kes Update Release notes
97 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
98 Warning, in previous beta version, all media get from scratch keep their
101 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
102 This should fix bug #842. Made a note to look at removing the temp
103 files at the end of the install.
104 kes Add ability to mount and unmount a file device providing it is
105 marked as being removable and has the appropriate mount and unmount
106 commands defined in the Device resource. This fixes bug #830.
107 kes When applying a storage override, release all previous storage
108 definitions rather than just prepending the new storage.
109 This should prevent a good deal of confusion.
111 kes Implement ./configure search for qwt libraries.
113 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
114 Win32 FD. This should fix bug #893.
115 kes Remove an unnecessary beep in Win32 init code.
116 kes Update copyright dates in Win32 executable about boxes.
117 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
118 code with a BSD getopt.c and getopt.h.
119 kes Remove sched.h from the Win32 compat directory -- not used.
120 kes Remove the Exit menu item from the Win32 tray monitor. If you really
121 need to shut it down, do it through the services panel or the command
123 kes Remove some inappropriate Bacula FSFE copyrights.
124 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
125 kes Fix regress config non-portable test as pointed out by
126 Florian Heigl <florian.heigl@gmail.com>
127 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
128 as pointed out by Florian Heigl <florian.heigl@gmail.com>
130 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
131 Reported by Frank Sweetser.
135 kes Fix client-only build.
136 kes Integrate client-only fixes for bsys (initgroups) and conio from
137 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
138 kes Make arguments to get_scratch_volume() in same order as other
140 kes Rework the prune_volumes() subroutine so that after purging and
141 no volume found in desired pool, it will check for a scratch
142 volume. This prevents recycling the whole scratch pool.
143 kes Add code to status storage to print boffset_t (largefile support).
145 kes Move qwt (Graphics libarary for Qt4) to depkgs.
146 kes You now need a --with-qwt=<dir> to be able to build bat.
147 kes Update src/win32/cats/bacula_cats.def to include the new
148 db_get_query_dbids() call on Win32.
150 kes Correct a problem when selecting a scratch volume and moving
151 it to another pool that lost some columns.
152 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
153 kes Enhance Autochanger error messages to include Volume and device name.
154 kes Rework prune_volumes() code to take account of InChanger flag,
155 and to handle recycling volumes going to the Scratch pool and
156 current pool because the RecyclePool directive.
157 kes Implement a better and more efficient db_get_query_dbids() to
158 handle creating and passing back a list of DBIds.
162 kes Start work on new more efficient DBId subroutine. First use
163 will be for recycling volume to Scratch inchanger.
164 kes Increase number of JobIds in pruning from 1000 to 10000.
165 This to be replaced by above routine.
166 kes Begin implementation of building Qt4 on Win32.
167 kes Correct typo in fix I added for bad TLS shutdown.
168 kes Pull 2.0.3 patches into patches directory.
169 kes Update Release notes. Include qt-console in line count.
170 kes Update Projects file.
172 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
173 bug in migration code where a job that spanned two volumes
176 kes Implement new BST_DESPOOLING blocked state. Change from locking
177 during despooling in SD to blocking. This means that other threads
178 can work with the device structure, in particular the reservations
179 system while despooling.
181 kes Fix return in reservation message queue that missed clearing
182 the jcr lock (implemented 26Jun07 below).
183 kes Rename a number of dev methods to make locking function names
185 kes Document locking in lock.c. Move lock structures to new file
188 kes Move reservations message lock to lock jcr only this
190 kes Move main SD locking code into lock.c (new file).
191 kes Update Win32 build to include lock.c
195 kes Dirk committed the qwt library code for drawing graphs in bat.
196 kes Tweak install of qwt so that it is integrated with ./configure.
198 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
199 out by Eric (my typo).
200 ebl Fix configure.in to get batch mode enable
201 kes Return correct string from authenticate.cpp in bat when connecting
203 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
204 spurious line drops when using TLS.
205 kes Do not file reparse points when restoring a file that already
208 kes Implement Windows reparse points -- similar to directories, but
209 we do not descend into it. This is a first cut. They seem to
210 be backed up, but restore is not yet tested.
211 kes Remove restore_blocking in tls code when shutting a socket to leave
212 it in blocking mode. Hopefully this will fix the encryption bug
213 reported by Frank Sweetser.
214 kes When opening a file for backup, tell the OS that we are going to
215 read it sequentially -- optimization.
216 kes Change variable names in authenticate_director() to not conflict
217 with member names in bat. Caused great confusion with compiler,
220 kes Queue openssl error messages in case of comm problem.
221 kes Do shutdown() call if socket terminated.
222 kes Remove some duplicated code in tls.c
223 kes Move more of the bsock member variables into private and access
225 kes Add Frank Sweetser's tls-test to the regression suite.
227 kes Add Swedish sv.po file
229 kes Don't print clock skew message in FD if less than 3 seconds diff.
230 kes Add a bit of VSS info to status client.
231 kes Implement a first cut of Vista VSS, using Win2003 code.
235 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
236 loaded tape but uses first drive).
237 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
238 This was indeed a Win32 issue.
240 kes Simplify search of autochanger for in-use Volume.
241 kes Fix exit condition of check for in-use volume. kes Remove
242 inappropriate my_postgresql_free_result() in db_close()
244 kes Fix bad return in FD when encryption signature not found.
245 Probably caused a crash.
246 kes Inhibit missing encryption signature error messages for
247 file types where no signature computed.
248 kes Correct inverted check on autochanger in reservation system.
249 kes Tweak debug code in autochanger reservation.
251 kes Add some additional locking in the cats directory in subroutines
252 that modify packet variables called from batch insert.
253 kes Rework how dcrs are allocated. new_dcr() can now be called
254 with an existing pointer, and it will simply clean it up.
255 This allows the reservation system to test various different
256 devices, and will permit easy device changes.
257 kes A bunch of changes all over to handle new new_dcr() calling
259 kes Work more on the Volume management in the SD. Remember Volumes
260 for tape drives and for autochangers (even virtual disk changers).
261 kes When looking at the Volume list to reserve a drive, handle
262 autochanger names correctly by interating through the changer
263 devices. Also call the Director to see if a Volume is suitable
265 kes Fix some bugs in bscan. Make sure all media records are written.
266 Make sure that valid JobMedia records are written for disk files.
267 Previously they were completely wrong.
268 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
269 that the URLs don't change and so that the developers will all
270 work off the same copy. Rebuild from scrach.
271 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
275 kes Fix seg fault in FD from incorrect digest size.
276 kes Fix argument to non-OpenSSL crypto.c subroutine.
280 kes Remove a few malloc()s from the encryption code.
281 kes Use the class calls to bsock in filed/backup.c and restore.c in
282 place of the old bnet_xxx code.
283 kes Implement code that does an on the fly calculation of the
284 signing digest during restore of encrypted files. It makes
285 a best guess at the algorithm, and if it is not correct, will
286 then revert to the old code which reads the file after it is
288 kes Implement at least one missing crypto stream in stream_to_ascii()
289 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
290 #877 where a reload with bad syntax causes Dir to exit.
292 Cut: 2.1.14 beta (not released)
294 kes Do not free a volume on a tape drive until another volume is
295 mounted and read, or the autochanger unloads the volume.
296 This should help the SD re-use volumes that are already mounted,
297 and should fix bug #886.
298 kes Apply patch from user brettedgar that allows gnome2-console include
299 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
300 kes Apply patch from Lucien Weller that fixes day of week calculation
301 because of DST flag problem. Fixes bug #887.
303 kes Move find_next_appendable_volume() to after acquiring a valid device
304 in reserve.c. This fixes bug #864 -- confirmed by reporter.
306 kes Unable to reproduce bug 872. However added additional testing for
308 kes Bug #874 resolved by documenting SQLite limitations.
309 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
310 kes Bug #881 resolved by removing typo in mtx-changer script.
311 kes Made Frank Sweetser's wiki the official Bacula wiki with his
312 approval. Added a link to the wiki on the web page, and implemented
313 a backup from http://paramount.ind.wpi.edu
315 kes Fix update allfrompool to pass pool name.
317 kes Convert to pure GPL v2 license.
318 kes Fix sscanf problems reported by Peter Buschman that caused
319 a bus error on Solaris.
320 kes Rework (simplify) the select prompt in bat.
321 kes Move get_jobid_from_tid() into lib and create a
323 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
324 should definitely fix the problem of lost error messages in the
326 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
327 kes Eliminate tcpd.h from the project. Enclose the #include from the
328 library with extern C ...
329 kes Add print of signal name when a signal is trapped.
333 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
335 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
336 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
337 makes SQLit3 run 30 times faster, though a bit less safe.
338 kes Implement --with-batch-insert in configure and detection of thread
339 safe libraries. It is on by default, but turned off if no thread
340 safe library (e.g. SQLite 2) is available.
342 kes Fix Bacula PostgreSQL buffer overruns.
343 kes Do better checking for NULL results returned from PostgreSQL;
344 implement retry for failed queries; clear results buffer after
345 failed query. Hopefully this will correct the PostgreSQL failures.
347 kes Implement algorithm to handle only one appendable volume with
348 Prefer Mounted Volumes = no.
349 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
350 returned from a query.
351 kes Make volume lock recursive.
352 kes Implement an additional volume reservation algorithm that
353 starts by considering all reserved volumes then uses the
354 old brute force algorithm of searching the resources to
355 find a suitable device.
356 kes Add new reservations debug code and refine the old code.
357 kes Update the win32/dll/bacula.defs file.
359 kes Tweak reservations algorithm to permit a few more cases, i.e.
360 volume reserved, but on different drive, ...
361 kes Enhance SD status to include Pool and Media Type for drive in a
362 more readable format (a bit longer).
363 kes Fix PostgreSQL double free.
365 kes Minor refactoring of restore decryption code.
366 kes Add code to smartall.c to detect double free of a buffer.
368 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
369 so that bsmtp will create a correct email address (mailbox only).
370 kes Modify 'memory' command so that the buffers are listed as 'In use'
371 to avoid confusion with Orphaned buffers.
372 kes I reworked the OpenSSL include/lib flags to be handled in
373 the standard Bacula way, which should fix bug #863 concerning
374 non-standard OpenSSL libraries.
376 kes Implement Help Browser window for bat.
377 kes Fix reload bug that reset StorageId to zero.
379 kes Fix TLS #ifdefing when TLS turned off.
380 kes Ensure that when labelling a tape with Slot=0 that InChanger
382 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
384 kes Add StartTime to final uar_sel_jobid_temp query so that we can
385 add DISTINCT (required by PostgreSQL).
386 kes Implement BSOCK authenticate_director() method. Eventually will
387 authenicate all daemons.
388 kes Move several more functions into the BSOCK class.
390 kes Add code to tell the OS that we no longer need a cached
391 file that we were reading. In findlib/bfile.c. Also,
392 only cache files that we are reading. Thanks to
393 Tobias Oetiker <tobi@oetiker.ch> for the idea.
394 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
395 kes Implement script to automatically generate cats and dll .def
397 kes Update README.mingw32 to include new .def file generation.
398 kes Correct typo in UTF-8 error message as reported by:
399 jhernandez <julianhernandez@gmail.com>
400 kes Add additional sm_check() code on debug level 1.
401 kes Set default debug level to 1.
402 kes Trap SIGABRT in attempt to get traceback.
404 kes Reduce bat connect timeout from 30 to 15 seconds.
405 kes More restructuring and implementing BSOCK class in place of
407 kes Remove a few unnecessary malloc() tests in crypto code.
408 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
409 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
410 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
412 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
414 kes Fix Verify InitCatalog. The attributes were not pointing to the
415 correct saved location.
416 kes Implement message callback so that GUI is sure to get all
417 daemon messages. Currently displayed in a dialog in bat.
418 kes Ignore SIGUSR2 (Bacula timer) in bat.
419 kes Apply regress patch from bug #859 to allow regress to work
420 with Solaris compiler.
422 kes Begin adding TLS support to bat.
423 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
424 clean up lex.c and make it more readable.
426 kes Move more bnet functions into the BSOCK class.
427 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
428 kes Complete change of berrno strerror() method to bstrerror()
432 kes Cleanup incorrect email addresses in bsmtp.
433 kes Make bat display initial messages rather than discard them.
435 kes First cut of adding .mod to the run command.
436 kes Implement auto display of messages in bat.
437 kes Enhanced preferences to allow all Bacula output to be
440 kes Try to make bsmtp date routines more generic.
441 kes Fixed bug #856 autochanger documentation.
442 kes Rework bsmtp date editing for Win32. This fixes bug #854.
443 kes Add new cats entry point so Win32 builds.
445 kes Attempt to fix bsmtp date editing on OSes without %z editing.
447 kes Do better checking for the MySQL 64 bit libraries looking for both
448 .a and .so libraries.
449 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
450 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
451 kes Require the thread safe version of MySQL during configure. Thanks
452 to Andre Noll for pointing this out.
453 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
454 continuing in migration code.
455 kes Apply implementation of tray-monitor font derived from gnome-console
456 submitted by Andreas Piesk <a.piesk@gmx.net>
458 kes Eliminate important memory loss in SQLite
459 kes Fixed the batch insert MySQL thread specific data that was not
460 being freed. See cats/mysql.c:db_thread_cleanup().
461 kes Fix restore before command.
462 kes Convert old hdr.name to name() in a few places.
463 kes Implement update jobid command.
464 kes Return all time_t dates in db_get_job_record()
465 kes Stop watchdog in SD earlier.
466 kes Put Pool just after Storage in please mount message.
467 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
470 kes Update the po files.
471 kes Fix Verify InitCatalog by making it cache attributes.
473 kes Change name bacula-bat to bat for man 1 page to correspond to
475 kes Check for client and store NULL pointers in status command. This
477 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
478 kes Fix sign extended editing of %p.
479 kes Clean out a little old #ifdefing in cats/mysql.c
481 kes If time diff between DIR and FD is more than 600 seconds convert
482 INFO message to WARNING.
483 kes Implement heap size display in status for all daemons.
484 kes Attempt to fix MySQL db open memory loss (not successfull).
485 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
486 kes Eliminate memory loss in MySQL (possibly other SQLs) during
487 Query. This looks like a MySQL but but by doing extra releases,
488 the memory goes away. This should fix bug #847.
490 kes When backup fails, cancel SD before waiting for sd termination.
491 kes If SD is waiting for FD to connect during cancel, wake up the
493 kes Fix fsf code so that errno is correctly reported.
494 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
496 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
497 so that Bacula doesn't later stumble into a seg fault.
498 kes Use the term Restore Client in the restore Job report.
499 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
500 the original job's FileSetId.
501 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
502 spooling in migration jobs. Not yet tested.
503 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
504 reading conf file from a pipe. However, do it with open_bpipe()
505 rather than popen. Not yet tested.
507 kes Fix an ugly bug where the VolCatBytes were getting updated
509 kes Implement bconsole memory command that prints current memory
510 usage, plus smartalloc dump.
511 kes Clarify some error messages in backup, admin, and migrate.
512 kes Shrink label dialog to smaller size.
513 kes Invert Cancel OK buttons on restore to be OK Cancel.
514 kes More strerror() to bstrerror() conversions.
516 kes Start implementing bstrerror() in place of strerror().
517 kes Stripping path -- seems to work.
519 kes Prevent door and port files from being restored (mostly
521 kes Free an unreleased buffer in compat code.
522 kes Change console Job name from *Console* to -Console- to eliminate
523 Win32 filename problems. Put Win32 path separator when creating
524 Console file. This fixes bug #846.
525 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
527 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
529 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
530 to force Win32 error message.
532 kes First cut strip path. The data should be passed to the FD,
533 but nothing is done with it yet.
534 kes Enhance the digest and signature routines in the crypto
535 library to accept a JCR and to use it to print error messages
536 so that they will go in the Job report rather than the daemon's
538 kes Simplify some of the verify signature code.
539 kes Simplify a few of the alternative returns in the signature
542 ebl Use only POSIX regex instead of GNU regex in breg.c for
543 File relocation. It fix broken freebsd compilation.
544 kes Convert all other Dir files to use new ua class message
546 kes Tentative fix for missing digest signature in bug 807.
547 kes Correct handle problem in new win32_ftruncate routine.
548 kes Convert ua_purge.c and ua_update.c to use new ua class
549 message routines for bat.
551 kes Correct incorrect installation of LICENSE in Win32 installer.
552 kes Display LICENSE at the beginning of the Win32 install.
553 kes Attempt to correct the need for the png files to be installed
555 kes Reapply my bat.conf install script in qt-console. I think I
556 editted bat.pro instead of bat.pro.in and it was lost.
557 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
558 the /var/lock/subsys for subsysdir. Also corrects typos in the
561 kes First cut update job.
562 kes Correct configure to include qmake of src/qt-console directory.
564 kes Make restore job yes/mod/no print in one command so GUI works.
565 kes First cut implementing backup and restore client.
566 kes Correct editing in Verify output that caused a seg fault.
568 kes Insure that bat.conf is not overwritten during installation.
569 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
570 while I was implementing migration in March 2006 !
572 ebl Cleanup file relocation, using char *RegexWhere instead of
573 char *where + bool where_use_regexp
574 kes Update some manpages and add bat manpage.
575 kes Make a first cut at converting bacula.spec.in for bwx-console
577 kes Apply patch from John Goerzen to add hostname as fourth argument
578 to make_catalog_backup script.
579 kes Fix typos I introduced into bsmtp.c
580 kes Make pm_strxxx() routines handle input of NULL pointer. This
581 is to protect from NULL pointers returned from SQL databases.
582 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
583 kes Add more debug to FIFO code -- fix fifo regression test.
585 kes Implement posix_fadvise in FD, and for reading spool files in SD.
586 kes Add thread timer to bnet_connect() to break from OS if wait time
589 kes Update Win32 build to include new files, new symbols, and
591 kes Implement socket level heartbeat (tcp_keepidle)
592 ebl Commit File relocation patch
593 kes Make bat have 'make install' target.
594 kes Warn during install if old gnome-console binary found.
595 kes Warn during install if old wx-console binary found.
596 kes Add -8 option to bsmtp command line to add content type utf-8.
597 Fixes bug #809. (Character coding problem in bsmtp).
598 kes If < is found in target (from, to, cc) then do not enclose the
599 target in < > in bsmtp. Fixes bug #772 (malformed address).
600 kes When printing certain items in dbcheck, stop after 300000.
601 Fixes bug #822. (dbcheck loops).
602 kes Incorrect status in Dir after waiting for mount with poll set.
605 kes Extend idea of Prefer Mounted Volumes to mean a volume about
607 kes Print waiting to reserve a device every 5 mins.
609 kes Don't call close_part in label.c if tape and relabel.
610 kes Don't free volume if busy in close() -- should help with
612 ebl Fix #824 RunScript bug (After script could be execute twice)
613 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
614 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
615 Add a regression script to test RunScript
617 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
620 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
621 deprecated. No additional bugs will be fixed, and they will be dropped
622 in a future release (probably 2.4.0).
623 kes Change name of wx-console to bwx-console to make it more Bacula
625 kes Change the name of gnome-console to bgnome-console to make it
628 kes Some time in March, a Feature Request with patch from Jorj Bauer
629 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
631 The ability for the director to validate a Client (FD) CN against
632 an arbitrary set of patterns rather than the hostname, with
633 A new 'TLS Allowed CN' set of directives which are implemented
634 in the Client resource. Then pattern matching is used in place
635 of hostname matching against the Certificate's CN. As an example, we
636 have certificates which (a) use a local CA, and (b) have a CN of the
638 kes Add new/changed entry points to Win32 build
639 kes Create unaccepted-projects for projects that are not accepted.
640 kes Simplify locking in the reservations system.
641 kes Add more debug code in reservations.
642 kes Make sure error condition on reserving a volume is handled correctly.
643 kes Correct handling of volume_in_use.
644 kes Correct handling of initializing a device.
645 kes Move handling of broadcasting releasing a device into release_device().
646 kes Correct attaching dcr to dev so that it is only done if device
647 is properly initiated.
649 kes Locking debug level tweaks in SD.
650 kes Tweak new Volume code.
652 kes Add exec external-command [wait-seconds] to bconsole. This
653 executes the external-command. Note! normally external-command
654 should be enclosed in double quotes.
655 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
656 it should normally be off in a production system.
658 kes Implement die command for SD so that we can force it to dump.
659 kes Implement SD lock debug code.
660 kes Implement new algorithm for keeping Volume list in SD. It
661 is now owned by the device.
663 kes Implement new code for freeing in use volumes that should
664 resolve if not all, some of the problems of multiple drive
665 tape conflicts described in bug 801.
667 kes Fix gui/bacula-web/images files in svn.
668 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
670 ebl Fix a bug in batch mode (in string escape)
671 kes Correct migration prune SQL typo that crept in in a
674 kes Move bnet_despool() into class in bsock.c
675 kes Modify job report to include director name and Build OS.
676 kes Move drop root privilege and check_catalog() before fork.
677 kes Add update database scripts (version 9 to 10) to updatedb directory.
679 ebl Check size and age of each file after its backup to see if
680 it has changed during backup, if 'checkfilechanges' is set.
681 The FD will do an extra check (stat(2)) after
682 each file backup. mtime, ctime and size are compared with
683 'before backup' information. If time or size mismatch, an
684 error message will be generated. You must upgrade FD to use it.
686 kes Make database name and user configurable
687 --with-db-name=xxx --with-db-user=xxx
688 kes Add back database type to message.c for debugging.
690 kes Implement dir_sql() which issues an SQL query.
691 kes Modify bat medialist to use dir_sql() and do some minor C++
692 formatting as well as eliminating a number of pointers, simplifing
695 kes Fix some of the mtx-changer grep commands for tape label readers.
696 kes Convert a number of bsendmsg into the appropriate send/warning/error
698 kes Suppress the using database message in the .sql command.
699 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
701 kes Add context menu for floating a window.
702 kes Some minor cleanup and name changes in qt-console
703 kes Add doing mt setblk 0 in Win32 mtx-changer.
704 kes Apply Martin's bug fix to move definition of ENODATA for
706 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
709 kes More pruning cleanup.
710 kes Turn on wait_for_drive by default in mtx-changer.
711 kes Turn on Batch insert code by default as it now passes regression.
712 kes Add ./configure --enable-bat to enable building of Bat.
713 No install yet though.
715 kes Implement a new .sql command for bat.
716 kes Implement code to turn off pruning in obtaining the next volume.
717 Pruning is turned off for the status dir command, but turned on
718 for SD requests and for the list nextvolume command.
720 kes Correct Qmsg() that was not updated correctly when committing a
721 previous change (probably the recent TLS patch).
723 kes Write new subroutine is_volume_purged() that explicitly checks
724 if the Volume is purged, and if so marks it as such. This should
725 resolve problems reported about needing to mount twice to recycle
727 kes Rewrite pruning algorithm to do more work in the SQL engine, and
728 to pass a list of JobIds to be deleted to SQL. Also, minimize the
729 amount of duplicated code.
730 kes Do volume pruning only for the Media Type desired (reduces pruning time
731 if multiple Media Types are in the same pool).
732 kes Implement more detailed info in the Job report for the Bacula version
734 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
736 ebl Add bbatch tool to bench database and insert mode.
737 Fix sql quote stuff in batch mode
738 Fix sql stuff for mysql
740 kes Correct problems with am/pm scheduling. Fixes bug #808.
741 kes Implement new prunning code that prunes up to 1000 jobs at
742 the same time. The same technique can be applied to a number
743 of other prune/purge subroutines.
744 kes Add an insanity check when starting a new tape job to ensure
745 that the tape position has not been changed. If so fail the
747 kes Fix Win32 build for dlls to add the folllowing:
748 src/lib/bsock.c -- new file with new entry points
749 src/lib/dlist.c -- new entry points
750 src/cats/sql_create.c -- new entry point
751 src/cats/sql_cmds.c -- new DATA item exported
753 ebl batch mode cleanup bscan-test is ok now.
754 kes Implement SD code to check length of disk volume before appending.
756 kes Correct return status on db_batch... routines.
757 kes Add call to db_write_batch_file_records() to migration code.
758 ebl Fix AfterJob timing
759 kes Move the checking of the database in initializion of the Director
760 to after we drop privileges. This avoids the need for both root
761 and bacula access to the DB.
762 kes Correct a misplaced variable definition in src/filed/backup.c
763 kes Correct how the new batch insert db_create_attributes_record()
764 uses the arguments. Caused a seg fault in bscan.
765 kes Implement lock() and unlock() methods in DEVICE class.
766 Implement block() and set_block(xx) methods in DEVICE class.
767 kes Modify bnet_connect() so that it uses time() to check for the
768 wait time expiring (on some OSes, some system calls may not
770 kes Modify Verify to obtain the previous JobId when it is actually
771 running rather than at schedule time (as it was in 1.38.x).
772 kes Fix src/job.c to handle MaxWaitTime correctly. This should
774 kes When checking pid in pid file, continue running if the pid is
775 the same as ours. This occurs on IRIX after a system crash.
778 kes Extend new GUI API.
779 kes Make the ua structure a class, and implement send_msg(),
780 error_msg(), warning_msg(), and info_msg().
782 kes Apply fix from for building wx-console on the Mac from
784 kes Implement new select mechanism for GUI programs.
785 kes Reorganize initialization of stackedWidgets in bat.
787 kes Add updated nagios plugin supplied by Christian Masopust.
789 kes More bat implementation.
790 kes File migrate bug with Pool Occupancy using mediaid instead
791 of jobids. Fixes bug #795.
792 kes Fix orphaned buffers in filed backup and verify due to
793 crypto buffers not freed during errors. Fixes bug #789.
794 kes Extend new GUI api code to tree commands.
795 kes Ensure that tree and dot commands check console ACLs.
796 kes Permit marking directory with trailing slash.
797 kes Allow 20 console connections (instead of only 10).
799 kes Add smartctl call to bacula-sd.conf as an example of getting
802 kes Modify jobq.c to let simultaneous restore jobs run. This may
803 cause them to fail if they cannot get a drive.
804 kes Add Client Connect Wait to Storage daemon to permit users to
805 modify the time the SD waits for a FD connection.
807 kes Correct virtual changer check which was backwards. This caused
808 volumes to be unloaded into slots already occupied.
810 kes Apply Command ACL filter to JobId list in restore command.
811 kes Correct typeo in var.c patch.
813 kes Don't let Bacula prune File or Job records for the current Job.
814 kes Fix variable substitution pad + inc bug reported (with patch)
817 kes Correct SQLite log table index as reported by Luca Berra.
819 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
821 kes Begin implementing new comm signals for API.
822 kes Fix a few places in lib/message.c where the open fd may
824 kes Continue implementing lib/bsock.c (real class). Make jcr,
825 who, host, and port private. There are new methods to access
826 them for non-class use. This required touching a number of files.
828 kes Add LANG=C to autoconf/randpass so it works with languages other
829 than English. Fixes bug #788.
831 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
833 You will not be able to generate Include/Exclude list any more.
834 It will be fixed soon.
835 If you want to use this, you can apply
836 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
838 kes Restore of sockets created false error messages because Bacula
839 no longer restores sockets, but the code was still trying to
840 set the attributes on a non-existent file. Reported by a user.
841 ebl finish RecyclePool feature
842 Media will takes Pool.RecyclePool
843 when moving from Scratch to a Pool or when user will do
844 update volume=xxx frompool
845 To use it, add RecyclePool = aPool to your Pool resource
848 RecyclePool = Scratch
852 kes Expand new BSOCK class adding signal() and new BNET signals.
853 kes Begin enhancing the dot commands adding a new API function
854 that returns more information and will make it easier
855 to interface to the Director from a program.
857 kes Make DEVICE fd private. Its new name is m_fd, and can be
858 obtained with dev->fd() outside the class. This is the
859 first of many DEVICE members to be made private.
860 kes Implement Michael Renner's idea on having a virtual disk
861 changer. I made some minor modifications (e.g. I did not
862 implement the Virtual Changer directive, but simply set
863 the Changer Command to an empty string.
865 kes Implement a BSOCK send() method that writes the whole record
866 in a single write() request rather than in two.
867 ebl add update volume=xxx recyclepool=yyyy
868 volume takes recyclepool from pool when using update volume=xxx from pool
870 kes Fix encryption deblocking bug, which caused some restored files
871 to be truncated. This fixes bug #763.
872 kes Add FD event sequence order prepared by Eric -- for RunScripts.
873 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
875 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
876 ebl Use btime_t instead of uint64_t in media patch.
878 kes Optimize the use of the database a bit in the Status dir command.
879 Only open it when needed, ensure that if any previous database
880 was opened, it is closed.
882 kes Correct VolCatBytes bug from media patch.
883 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
884 in the case of orphaned records.
885 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
886 and File records in 300K chunks to be more efficient. This
887 idea came from Juan Luis Frances (if I remember right).
888 kes Apply Eric's scratch patch that moves a purged Volume to
889 the RecyclePool. Question: how is RecyclePool set? what
890 happens to the ScratchPool?
891 kes Apply Eric's media patch that collects read/write media
892 times as well as byte counts. This patch requires a
893 simultaneous upgrade of the DIR and SD. Note, there
894 should be some way to turn off timing. I'm not sure
895 times are in Bacula units.
896 kes Apply Eric's batch-insert patch.
898 kes Update projects list.
900 kes Implement Include/Exclude file lists in FD as dlists using
901 the new dlistString class. This permits efficiently having
902 large include/exclude lists and completes project Item 25.
903 kes Fix dird/ua_cmds.c so that a cancel command checks if the
904 console is authorized to cancel the job. This fixes bug
906 kes Modify SD so that the VolCatJobs medium record is updated
907 at the beginning of a Job rather than the end. This
908 fixes bug #775 where exceeding MaxVolJobs caused jobs
910 kes Added a mutex around getting and setting Volume information
911 so that multiple simultaneous jobs will single thread.
913 Switch to using Subversion
914 kes Remove src/pygtk-console/ from configure
916 kes Delete src/lib/btree.c from win32 build, then add rblist.c
917 plus the entrypoints.
918 kes Apply patch supplied that corrects debug print
919 in canceling jobs for max run time. Supplied as
920 part of bug #621, which was previously fixed.
922 kes Test on job_canceled() and sd_msg_thread_done inside
923 loop starting the message thread to avoid a race condition.
925 kes Remove rl_catch_signal from console.c as it conflicted
926 with the header definition. Fixes bug #765.
927 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
929 kes Clarify some stored/acquire messages to indicate if the
930 problem is with read or append.
932 kes Fix memory leak with storage ids in cats/sql_get.c
933 kes Terminate watchdog earlier to avoid reference to released
934 memory -- reported by Jason Austin.
935 kes Move closing the database from jobq.c to the director daemon
936 termination routine. This fixes memory leaks for shadow jobs
937 (i.e. migration jobs).
938 kes Free up the unique jobid chain items in migrate.c. This fixes
939 a memory leak problem.
940 kes Convert some ugly looking for statements to use foreach_alist
941 in findlib/find.c. This will facilitate converting the structures
942 to use dlist (for large include/exclude lists).
943 kes Fix a bug in the btree.c and btree.h routines, then rename them
944 rblist and add them to be built in src/lib. Include some new
945 methods written by Rudolf Cejka that make the code more readable
946 (hides some of the ugly casting).
947 kes Add set_next() and set_prev() methods which make the code much more
948 readable. Also add a new dlistString class that facilitates storing
949 strings in dlists. To be used in the large include/exclude lists.
950 kes Make some trivial modifications to lib/tree.h that use rblist
951 rather than dlist for storing the tree links. This was suggested
952 by Rudolf Cejka. The result of this is that the restore tree now
953 uses red-black binary trees rather than simple linked lists. This
954 should give rather dramatic speed improvements for directories
955 contining large numbers of directories/files (more than 10000).
957 kes Fix maxruntime bug #621.
959 ebl Implement the include JobID in spool file name project.
960 kes Reorder projects file in order determined by Jan 2007 vote.
961 kes Implement item #12 on project list -- quick release of FD by
963 kes Fix open of SQLite3 db where user does not have write permission
964 so that DIR does not crash. Fixes bug #761.
966 kes Add back missing @ in Win32 Makefile.
967 kes Change 'Device not configured to autolabel' from INFO
969 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
970 which should restart an indefinite # of times.
971 kes Fix configure --help to print --with-mysql[=DIR]. Same for
972 other DIR specifications.
974 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
975 Fix path quoting in SQLite scripts.
976 Fix problems with SHGetFolderPath.
978 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
980 kes Fix Job restart on error bug that promotes an Inc to a Full
981 backup. This should fix bug #755.
982 kes Add qt-console and first cut of code.
986 kes Fix Bacula->Documentation link on Win32 to point to index.html
987 instead of bacula.html. Fixed bug #750.
988 kes Return JobId in db_get_job_record() when JobId==0. This should
990 kes Do not release source pointers when restarting a failed job.
992 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
993 This *should* fix bug #747.
994 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
997 kes Modify USTORE constructor to set an empty store_source string,
998 and don't copy the store_source string in a cancel. Hopefully
999 this will fix Arno's seg fault, bug #744.
1000 kes Add back code to disable conio in configure. Fixes bug #743.
1001 kes Correct the Options scanner in the FD to correctly handle
1002 SHA1 option, which was eating the next option. Reported by
1004 kes Add code to indicate when the SD is spooling, spool wait, and
1005 despooling as requested by Alan Brown.
1007 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob