1 Technical notes on version 2.3
5 ebl Fixes #1028 where "Selection Type" option was not usable with JobDefs.
6 ebl Fixes #897 and #1005 where bacula doesn't display runscript
9 kes Add new free_tls() entry point so that Win32 builds.
10 kes Fix compile warning in src/lib/util.c
11 kes Fix entry point for edit_job_codes() so that Win32 builds.
12 kes Fix seg fault Frank Sweetser reports in regression testing
13 on his systems. The problem was that the original author of
14 bsnprintf.c did not take into account the side effects of
15 using ++x in the argument to a #define.
16 kes Make SD protocol backward compatible with version 2.2.x.
18 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
19 because Bacula no longer restores sockets.
20 ebl Always use ignorecase fileset option on win32 FD.
22 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
23 that implements double quoting include names in conf files,
24 and also allows piping input by having the first character
25 be a vertical bar (|).
26 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
27 that implement %f in RunScripts to pass the FileSet name.
28 kes Skip leading | when lex input comes from a pipe as suggested
29 by Michael Stapelberg <michael@stapelberg.de>.
31 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
32 Nerijus Baliunas <nerijus@users.sourceforge.net>
34 kes Implement Plugin Directory and plugin events.
36 kes Implement a security enhancement: TLS authentication but no
37 encryption. Enabled by setting 'TLS Authentication = yes'.
38 Note when this is on, TLS encryption is turned OFF!
40 kes This patch corrects a problem where the maximum concurrent storage
41 jobs counter gets out of sync during restore jobs causing jobs to
42 'wait on max Storage jobs'. This patch fixes bug #1009.
44 kes This patch fixes bcopy so that it produces correct Volumes.
46 kes This patch eliminates spurious output to the console during a VerifyVolume
47 job that contains encrypted data. It fixes bug #1024.
49 kes This patch prevents the 'status dir' command from trying to use a scratch
50 volume and possibly moving it from one pool to another. This patch fixes
53 kes Add new include to postgresql.c suggested by Marc Cousins so
54 that it compiles correctly with pgre version 8.3.
56 kes Fix --archivedir addition to configure. Replace it with
57 --with-archivedir in configure.in This fixes the regression
59 kes This patch fixes bug #1012 where the job is canceled because
60 of Max Run Time exceeded when the job has not yet started.
62 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
63 one 'part' to write. Instead of each part being stored on disk,
64 written to DVD, then deleted from disk, all parts are written to disk,
65 and only the last is written and deleted from disk.
66 kes This patch fixes the status command to include the formating string for
67 JS_AttrInsterting. It fixes bug #1021.
68 kes This patch should fix the Mac OS X build problem on the latest
69 Darwin, where sys/types.h was not included correctly (apparently
70 due to a change in the Mac headers). The solution was to explicitly
71 ensure that it is defined for the ./configure.
72 This patch also has a rebuild of configure that includes the Debian
73 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
74 kes This patch should ensure that queued messages to the console are
75 displayed as soon as possible. It should fix bug 1007, but has been
78 kes This patch fixes the infinite loop when trying to increase the
79 maximum number of volumes in a Pool during the add command.
80 This patch fixes bug #1008.
84 db Remove extra data on estimate command in joblist for bat.
86 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
87 really change anything, but is the beginning of doing it *right*.
88 To do it completely right the LastWritten date must be passed to
89 the SD, but it is not yet done.
90 kes Minor tweaks to some bat restore SQL.
91 kes This patch fixes bug #1003 where putting the message output from
92 a Verify job into the catalog results in a recursive loop. The problem
93 seems to show up only with postgresql (to be verified).
94 kes Correct %x to %p in postgresql debug statement.
96 kes Fix bug #942 where lots of emails where generated when the heartbeat
97 interval was low and Bacula wanted a different tape from the one in
100 ebl Add new SD despooling attributes and Dir inserting attributes
101 job status codes in the catalog (Status table).
103 ebl Use qmake-qt4 instead of qmake when available (debian system).
105 kes Add a security warning to src/cats/make_catalog_backup.in indicating
106 that passing the password via the command line (arg 3) is insecure.
107 This responds to bug #990 (it doesn't fix it).
109 kes Set default debug_level to zero. This corrects bugs #991 and #993.
110 kes Fix a crash in bat when it cannot connect to the Director for example
111 if the Director is not running.
112 kes Remove redundant INDEX (JobId) from File table in the trunk.
114 kes Make explicit exception to GPL in LICENSE to permit linking
115 the Win32 FD with Microsoft VSS code.
116 kes Apply the Solaris package patch from
117 Masopust, Christian <christian.masopust@siemens.com>
118 kes Apply the patch to optionally add a timestamp in the debug output
119 submitted by Mariusz Czulada <manieq@wp.eu>.
121 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
122 backend (sql_strerror). Fixes bug #989
124 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
125 It applied with no problems.
126 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
128 kes Redirect stderror to stdin on mt status command in mtx-changer.in
129 since the status is returned on stderr on Solaris.
130 kes Activate Close button on tray-monitor window. This fixes
132 kes Check for NULL item in parse_conf.c before calling it. In the
133 case of Device, there is no item and this caused a seg fault when
134 Device appears in the conf file.
135 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
136 avoids pulling in config.h multiple times in some new code.
138 kes Fix spurious warning message printed when creating a volume with
139 a LabelFormat. This fixes bug #976.
141 Release Version 2.2.5
143 kes Add JobId in place of Job name in all the Jmsg() output.
144 kes Correct the APP_DESC for the Win32 storage service (remove an e).
146 kes Make maxvol-test and new more strict maxvol2-test work.
147 kes Print JobId in all Jmsg() job output.
149 kes Add new SD despooling attributes and Dir inserting attributes
150 job status codes. This fixes bug 961.
151 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
153 kes Fix doc issue. This fixes bug #963.
154 kes Fix listing performance problems in bat. Pointed out by
156 kes Remove old debug code.
157 kes Fix bat code that tests for Win32. This should fix bug #968
158 kes Query 5 list wrong Vol after migration. This fixes bug #960
160 ebl Fix #969 where user can't change Replace option in restore menu.
162 kes Save jcr in thread specific data (tsd) for each thread.
163 kes Make Dmsg() print JobId as -%u.
164 kes Make Jmsg, Emsg, and others automatically pickup the jobid
165 for the thread if it exists.
166 kes Remove old reservation debug jid code.
167 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
168 ebl Add an option that permit to specify spool size in job
169 definition. (Applying patches/testing/spoolsize_per_job.patch).
170 You must upgrade SD and DIR at the same time.
171 dvl Add new configuration item --archivedir
172 dvl Adjust regression tests to use tmp not /tmp. This will allow
173 multiple concurrent runs of the regression tests.
175 kes Fix race condition that drops final block written to volume.
176 This happens in rare cases with multiple simultaneous jobs
177 when the Volume fills. This fixes bug #964. May be related
178 to bug #935 and possibly #903.
179 kes Eliminate more strerror() and replace with bstrerror().
180 kes Remove BSD getopt and replace with unrestricted IBM version.
181 kes Fix Win32 build for changed calling sequences.
182 kes More tweaks to the mount volume routines to get everything
183 right. Changed variable name from find to have_vol, which is
184 much easier to understand.
185 kes Enhance btimer debug code.
187 kes Fix FD->SD authorization failure, which was due to spurious
188 wakeups from a pthread_cond_timedwait(). Simply check the
189 predicate before continuing. This fixes bug #953.
190 kes Add const char where needed (more to do). Remove temp debug code.
192 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
193 kes Don't overwrite error message in check_tables_version.
195 kes Unlock batch insert tables with same calls used elsewhere.
196 kes Allow starting 59 jobs a second.
197 kes Make SD session key more random.
198 kes Add retry for SQLite opening db if it fails. Probably helps
200 kes Suppress extra error messages during batch insert failure.
202 kes Add jcr to timer packets so if killed message can be sent to job.
203 kes Add JobId to all Dmsg() output.
204 kes Put some FD auth code on dbglvl rather than fixed.
205 kes Return insert attributes error message in db msg buffer to avoid
206 false error messages. Helps fix bug #966.
207 kes Separate batch init error messages. Probably helps fix bug #966.
208 kes Make SD code that contructs attribute insert check string lengths
210 kes If Dir gets an error during inserting attributes, cancel SD.
211 This reduces unnecessary error messages.
213 kes Correct search boolean for getting Volume info
214 ebl Cleanup batch insert code. Probably fixes bug #965.
215 kes Back out one small change to the reservation system (reserving a volume).
216 kes Rework how a Volume is mounted. It is now much more intelligent and
217 will always attempt to use any mounted volume if possible and reduces
218 calls to the Director asking about volumes.
220 kes Turn off some code when batch insert not enabled.
221 kes Edit FD name in connect error messages.
222 kes Rework the reservation system to take into account that the Director
223 might give us a Volume that is different from the current one being
224 used, and to ensure that we don't exceed Maximum Volume Jobs.
225 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
226 fatal error with multiple jobs running'
227 kes Add more debug code in reservation system.
228 kes Implement maxvol-test to check bug #947.
230 kes Add code to handle tray monitor separated from Win32 FD.
231 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
233 kes Add missed return in fixing verify bug -- trunk only.
234 ebl Fix a command parser issue causing a director segfault.
235 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
237 kes Increase the max block size to 4MB fixes bug #957.
238 kes ERABT if user sets min block size > max block size. Fixes bug #956.
239 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
240 is not properly mounted (recognized) during a poll.
241 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
242 Job that has differences reports Verify OK.
243 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
245 ebl Add an option to operate on all pools with update vol parameters.
246 This complete the project 20. Patch from Nigel Stepp.
247 ebl Add history support to bconsole when using readline.
248 Using Ctrl-D to exit doesn't update .bconsole_history
249 kes Modify new volume algorithm to use max MediaId for generating next
250 volume number rather than the count of Volumes. This should essentially
251 eliminate the failure rate if some volumes were deleted. Bug #921.
252 kes Begin implemention of Optimize Job Scheduling.
253 kes Implement restore callback that Dirk and I agreed on for bat
254 restore. This fixes bug #928. Restore of backup of zero files fails.
255 kes Fix SQL Catalog logging which broke with new db_escape_string
258 Release Version 2.2.4
260 kes Fix bacula_cats.def for new db_escape_string().
261 kes Increase size of name string when FD making connection to SD.
262 May fix bug #953. FD->SD connection failure.
264 kes Add code to help Dan debug 2drive-incremental-2disk test.
265 kes Add code to try to fix bug #908.
266 kes Add waits to multiple exit detection code to try to force pid
267 file to always be deleted.
268 kes Restore good dev.tar.gz to rescue set appropriate binary property.
270 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
271 trying to switch drives by checking for blocking before unblocking.
273 kes Cancel storage daemon in all cases where FD reports error. This
274 should fix virtually all cases of bug #920.
275 kes Fix db_escape_string() for MySQL which did not compile.
277 kes Fix error message that was clobbered when Dir tells SD it does not
278 have write permission on Volume. This should fix a minor point
279 in bug #942, but not the main problem.
280 kes Add code to cancel job in SD if FD connection fails. This should
282 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
283 dvl Pass jcr and db into db_escape_string() to enable better escaping
285 kes Fix migration code to get correct Volume name with multiple volumes
286 by skipping |. Fixes bug #936.
287 kes Implement patch supplied by Landon to fix bug #944 where using
288 TLS with bconsole uses 99+% of the CPU.
289 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
291 kes Move patches into patches directory.
293 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
296 ebl Using 'm' in bconsole will show messages like before,
297 and not memory usage.
298 kes Fix bug #935, and probably also bug #903 where files were not
299 restored. MediaId was not properly set in JobMedia record after
302 kes Suppress chown and chmod error messages if the FD is not running
305 kes Apply Martin Simmons' patch that should turn off the new API usage
306 when batch insert is turned off allowing building on older
308 kes Add ./configure search in qwt-qt4 for qwt package
310 kes Bacula is now free of 3rd party GPL copyrighted code!
312 kes Add guid_to_name.c/h which replace idcache.
313 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
315 ebl Detect if new PosgreSQL batch insert API is present.
316 kes Correct incorrect mempool call causing Director crash. Occurs on
317 systems without va_copy().
318 sb Update spec files for 2.2.1 release
320 kes Fix memory pool call in ua_output.c. bug #934.
321 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
322 Add test program to fnmatch.c
324 kes Integrate patch to README.vc8 from
325 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
326 edit it to get it into Unix patch format.
327 kes Implement mkpath.c to replace old FSF makepath.c
329 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
331 Release Version 2.2.1
333 kes Update POTFILES.in
334 kes Cleanup a few underquoted AC_DEFUNs in configure
335 kes Apply patch from Martin Simmons that adds a test for va_copy to
338 kes Fix bug #921 by increasing the number of tries to create a new volume
340 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
341 can be called multiple times. Implement a version for machines
342 without va_copy() that gets a big buffer.
344 kes Integrate more portable zone offset code into bsmtp.c
345 Submitted by Attila Fülöp.
347 kes Fix bad SD->FD return status reported by
348 (James Harper) <james.harper@bendigoit.com.au>
349 ebl Fix a bug in read_close_session which return random status
350 thanks to James Harper
352 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
353 and directory names during restore of single file/directories.
354 kes Add sanity checks to .sql command when string is empty. Hopefully
355 that will resolve Dirks Director crash.
357 kes Apply patch submitted by Martin Simmons that corrects a seg fault
358 in the bsmtp chat subroutine when debug is >= 10.
360 kes Fix Director crash when running bat SQL queries.
361 kes Add David's notes on Item 8: Copy pools.
363 kes Rework projects file to be current and ready for a vote.
364 kes Enhance lex scanner error message.
366 kes Tweak LICENSE file to mention BSD code.
367 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
368 if specified on the ./configure.
369 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
370 This class is intended to allow us to open a second bsock to the
371 Director while in the restore subdialog.
373 kes Fix configure to create bat Makefile before creating dependencies.
374 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
375 kes Add a tooltip to the tray monitor.
376 dvl Set the Director's PID file before dropping privs. This fixes
379 kes Update AUTHORs file
380 kes Increase the default max concurrent jobs to 20 in FD and SD to
381 correspond with the default .conf files.
382 kes Rewrite the Win32 service routines. This eliminates the 3 copies
383 some different, of the same file created by RN when porting the
385 kes Rearrange some of the Win32 directories and the placement of the files
387 kes Set DEVELOPER flag in version.h
389 ========================================================================
390 Release Version 2.2.0
392 kes Apply a second doc patch from Marc.
393 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
394 improves the tips section that discusses how to setup multiple
397 kes Update bat README file.
398 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
399 corrects a typo in the Recycle status check in db_find_next_volume().
400 This will probably fix a number of annoying problems with multiple
402 kes Modify most of dird/msgchan.c to use bsock class calls rather than
403 bnet calls -- no functionality change.
405 kes Modify the Verify output to specify if files are missing on
406 the Volume(s) or disk. Fixes confusion in bug #916.
407 kes When more than one Volume is read in a migration job, the last
408 Volume bytes reported are from the last read volume rather than
409 the last written volume. Fixed. This fixes bug #910.
410 kes Fix display of Recycle flag after update volume=foo recycle=yes.
411 It previously printed New Recyle flag is: no. This fixes bug
414 kes Correct seg fault when switching tape drives during restore.
415 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
416 be used until after 2.2.0 release.
418 kes Remove fnmatch() in SD that permitted wild card specifications.
421 kes Fix %g in filename returned by SQL for browse tree reported by
423 kes Fix configure so that it puts config.out in the cwd rather than
425 kes Attempt to fix the locking problem reported by Eric in bug #906.
426 kes Make berrno class to leave errno unchanged after constructor call.
427 kes Make bnet_server use the heap rather than the stack to allocate
428 its socket fd pointers to avoid a crash at termination. Problem
429 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
431 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
432 and putting it in depkgs-qt along with Qt4.3.
434 kes Rework code in acquire.c that switches drives for reading when
435 the Media Type does not match. This should fix bug #906
437 ebl Fix a director segfault during job setup #907
438 kes Correct seg fault in postgresql when first operation returns no
439 rows. Fixes Dirks File browser problem seg fault with bat.
441 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
442 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
445 kes Implement PopUp YES/NO dialog for bat.
447 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
449 kes Correct RunScript to terminate job in FD on failure.
450 kes Change abort_on_error and AbortJobOnError to fail_on_error
451 and FailJobOnError in RunScripts.
452 kes Minor tweaks of code formating in RunScripts, principally to
453 avoid depassing 80 columns.
455 kes Eliminate one #ifdef Win32 in bsmtp
456 kes Implement grow tool to grow a file for testing very large databases.
457 kes Add big-vol-test to test Bacula seeking with > 5GB.
460 kes Modify find_next_volume() to return all values in Media record.
461 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
465 kes Update Release notes
467 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
468 Warning, in previous beta version, all media get from scratch keep their
471 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
472 This should fix bug #842. Made a note to look at removing the temp
473 files at the end of the install.
474 kes Add ability to mount and unmount a file device providing it is
475 marked as being removable and has the appropriate mount and unmount
476 commands defined in the Device resource. This fixes bug #830.
477 kes When applying a storage override, release all previous storage
478 definitions rather than just prepending the new storage.
479 This should prevent a good deal of confusion.
481 kes Implement ./configure search for qwt libraries.
483 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
484 Win32 FD. This should fix bug #893.
485 kes Remove an unnecessary beep in Win32 init code.
486 kes Update copyright dates in Win32 executable about boxes.
487 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
488 code with a BSD getopt.c and getopt.h.
489 kes Remove sched.h from the Win32 compat directory -- not used.
490 kes Remove the Exit menu item from the Win32 tray monitor. If you really
491 need to shut it down, do it through the services panel or the command
493 kes Remove some inappropriate Bacula FSFE copyrights.
494 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
495 kes Fix regress config non-portable test as pointed out by
496 Florian Heigl <florian.heigl@gmail.com>
497 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
498 as pointed out by Florian Heigl <florian.heigl@gmail.com>
500 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
501 Reported by Frank Sweetser.
505 kes Fix client-only build.
506 kes Integrate client-only fixes for bsys (initgroups) and conio from
507 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
508 kes Make arguments to get_scratch_volume() in same order as other
510 kes Rework the prune_volumes() subroutine so that after purging and
511 no volume found in desired pool, it will check for a scratch
512 volume. This prevents recycling the whole scratch pool.
513 kes Add code to status storage to print boffset_t (largefile support).
515 kes Move qwt (Graphics libarary for Qt4) to depkgs.
516 kes You now need a --with-qwt=<dir> to be able to build bat.
517 kes Update src/win32/cats/bacula_cats.def to include the new
518 db_get_query_dbids() call on Win32.
520 kes Correct a problem when selecting a scratch volume and moving
521 it to another pool that lost some columns.
522 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
523 kes Enhance Autochanger error messages to include Volume and device name.
524 kes Rework prune_volumes() code to take account of InChanger flag,
525 and to handle recycling volumes going to the Scratch pool and
526 current pool because the RecyclePool directive.
527 kes Implement a better and more efficient db_get_query_dbids() to
528 handle creating and passing back a list of DBIds.
532 kes Start work on new more efficient DBId subroutine. First use
533 will be for recycling volume to Scratch inchanger.
534 kes Increase number of JobIds in pruning from 1000 to 10000.
535 This to be replaced by above routine.
536 kes Begin implementation of building Qt4 on Win32.
537 kes Correct typo in fix I added for bad TLS shutdown.
538 kes Pull 2.0.3 patches into patches directory.
539 kes Update Release notes. Include qt-console in line count.
540 kes Update Projects file.
542 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
543 bug in migration code where a job that spanned two volumes
546 kes Implement new BST_DESPOOLING blocked state. Change from locking
547 during despooling in SD to blocking. This means that other threads
548 can work with the device structure, in particular the reservations
549 system while despooling.
551 kes Fix return in reservation message queue that missed clearing
552 the jcr lock (implemented 26Jun07 below).
553 kes Rename a number of dev methods to make locking function names
555 kes Document locking in lock.c. Move lock structures to new file
558 kes Move reservations message lock to lock jcr only this
560 kes Move main SD locking code into lock.c (new file).
561 kes Update Win32 build to include lock.c
565 kes Dirk committed the qwt library code for drawing graphs in bat.
566 kes Tweak install of qwt so that it is integrated with ./configure.
568 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
569 out by Eric (my typo).
570 ebl Fix configure.in to get batch mode enable
571 kes Return correct string from authenticate.cpp in bat when connecting
573 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
574 spurious line drops when using TLS.
575 kes Do not file reparse points when restoring a file that already
578 kes Implement Windows reparse points -- similar to directories, but
579 we do not descend into it. This is a first cut. They seem to
580 be backed up, but restore is not yet tested.
581 kes Remove restore_blocking in tls code when shutting a socket to leave
582 it in blocking mode. Hopefully this will fix the encryption bug
583 reported by Frank Sweetser.
584 kes When opening a file for backup, tell the OS that we are going to
585 read it sequentially -- optimization.
586 kes Change variable names in authenticate_director() to not conflict
587 with member names in bat. Caused great confusion with compiler,
590 kes Queue openssl error messages in case of comm problem.
591 kes Do shutdown() call if socket terminated.
592 kes Remove some duplicated code in tls.c
593 kes Move more of the bsock member variables into private and access
595 kes Add Frank Sweetser's tls-test to the regression suite.
597 kes Add Swedish sv.po file
599 kes Don't print clock skew message in FD if less than 3 seconds diff.
600 kes Add a bit of VSS info to status client.
601 kes Implement a first cut of Vista VSS, using Win2003 code.
605 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
606 loaded tape but uses first drive).
607 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
608 This was indeed a Win32 issue.
610 kes Simplify search of autochanger for in-use Volume.
611 kes Fix exit condition of check for in-use volume. kes Remove
612 inappropriate my_postgresql_free_result() in db_close()
614 kes Fix bad return in FD when encryption signature not found.
615 Probably caused a crash.
616 kes Inhibit missing encryption signature error messages for
617 file types where no signature computed.
618 kes Correct inverted check on autochanger in reservation system.
619 kes Tweak debug code in autochanger reservation.
621 kes Add some additional locking in the cats directory in subroutines
622 that modify packet variables called from batch insert.
623 kes Rework how dcrs are allocated. new_dcr() can now be called
624 with an existing pointer, and it will simply clean it up.
625 This allows the reservation system to test various different
626 devices, and will permit easy device changes.
627 kes A bunch of changes all over to handle new new_dcr() calling
629 kes Work more on the Volume management in the SD. Remember Volumes
630 for tape drives and for autochangers (even virtual disk changers).
631 kes When looking at the Volume list to reserve a drive, handle
632 autochanger names correctly by interating through the changer
633 devices. Also call the Director to see if a Volume is suitable
635 kes Fix some bugs in bscan. Make sure all media records are written.
636 Make sure that valid JobMedia records are written for disk files.
637 Previously they were completely wrong.
638 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
639 that the URLs don't change and so that the developers will all
640 work off the same copy. Rebuild from scrach.
641 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
645 kes Fix seg fault in FD from incorrect digest size.
646 kes Fix argument to non-OpenSSL crypto.c subroutine.
650 kes Remove a few malloc()s from the encryption code.
651 kes Use the class calls to bsock in filed/backup.c and restore.c in
652 place of the old bnet_xxx code.
653 kes Implement code that does an on the fly calculation of the
654 signing digest during restore of encrypted files. It makes
655 a best guess at the algorithm, and if it is not correct, will
656 then revert to the old code which reads the file after it is
658 kes Implement at least one missing crypto stream in stream_to_ascii()
659 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
660 #877 where a reload with bad syntax causes Dir to exit.
662 Cut: 2.1.14 beta (not released)
664 kes Do not free a volume on a tape drive until another volume is
665 mounted and read, or the autochanger unloads the volume.
666 This should help the SD re-use volumes that are already mounted,
667 and should fix bug #886.
668 kes Apply patch from user brettedgar that allows gnome2-console include
669 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
670 kes Apply patch from Lucien Weller that fixes day of week calculation
671 because of DST flag problem. Fixes bug #887.
673 kes Move find_next_appendable_volume() to after acquiring a valid device
674 in reserve.c. This fixes bug #864 -- confirmed by reporter.
676 kes Unable to reproduce bug 872. However added additional testing for
678 kes Bug #874 resolved by documenting SQLite limitations.
679 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
680 kes Bug #881 resolved by removing typo in mtx-changer script.
681 kes Made Frank Sweetser's wiki the official Bacula wiki with his
682 approval. Added a link to the wiki on the web page, and implemented
683 a backup from http://paramount.ind.wpi.edu
685 kes Fix update allfrompool to pass pool name.
687 kes Convert to pure GPL v2 license.
688 kes Fix sscanf problems reported by Peter Buschman that caused
689 a bus error on Solaris.
690 kes Rework (simplify) the select prompt in bat.
691 kes Move get_jobid_from_tid() into lib and create a
693 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
694 should definitely fix the problem of lost error messages in the
696 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
697 kes Eliminate tcpd.h from the project. Enclose the #include from the
698 library with extern C ...
699 kes Add print of signal name when a signal is trapped.
703 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
705 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
706 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
707 makes SQLit3 run 30 times faster, though a bit less safe.
708 kes Implement --with-batch-insert in configure and detection of thread
709 safe libraries. It is on by default, but turned off if no thread
710 safe library (e.g. SQLite 2) is available.
712 kes Fix Bacula PostgreSQL buffer overruns.
713 kes Do better checking for NULL results returned from PostgreSQL;
714 implement retry for failed queries; clear results buffer after
715 failed query. Hopefully this will correct the PostgreSQL failures.
717 kes Implement algorithm to handle only one appendable volume with
718 Prefer Mounted Volumes = no.
719 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
720 returned from a query.
721 kes Make volume lock recursive.
722 kes Implement an additional volume reservation algorithm that
723 starts by considering all reserved volumes then uses the
724 old brute force algorithm of searching the resources to
725 find a suitable device.
726 kes Add new reservations debug code and refine the old code.
727 kes Update the win32/dll/bacula.defs file.
729 kes Tweak reservations algorithm to permit a few more cases, i.e.
730 volume reserved, but on different drive, ...
731 kes Enhance SD status to include Pool and Media Type for drive in a
732 more readable format (a bit longer).
733 kes Fix PostgreSQL double free.
735 kes Minor refactoring of restore decryption code.
736 kes Add code to smartall.c to detect double free of a buffer.
738 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
739 so that bsmtp will create a correct email address (mailbox only).
740 kes Modify 'memory' command so that the buffers are listed as 'In use'
741 to avoid confusion with Orphaned buffers.
742 kes I reworked the OpenSSL include/lib flags to be handled in
743 the standard Bacula way, which should fix bug #863 concerning
744 non-standard OpenSSL libraries.
746 kes Implement Help Browser window for bat.
747 kes Fix reload bug that reset StorageId to zero.
749 kes Fix TLS #ifdefing when TLS turned off.
750 kes Ensure that when labelling a tape with Slot=0 that InChanger
752 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
754 kes Add StartTime to final uar_sel_jobid_temp query so that we can
755 add DISTINCT (required by PostgreSQL).
756 kes Implement BSOCK authenticate_director() method. Eventually will
757 authenicate all daemons.
758 kes Move several more functions into the BSOCK class.
760 kes Add code to tell the OS that we no longer need a cached
761 file that we were reading. In findlib/bfile.c. Also,
762 only cache files that we are reading. Thanks to
763 Tobias Oetiker <tobi@oetiker.ch> for the idea.
764 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
765 kes Implement script to automatically generate cats and dll .def
767 kes Update README.mingw32 to include new .def file generation.
768 kes Correct typo in UTF-8 error message as reported by:
769 jhernandez <julianhernandez@gmail.com>
770 kes Add additional sm_check() code on debug level 1.
771 kes Set default debug level to 1.
772 kes Trap SIGABRT in attempt to get traceback.
774 kes Reduce bat connect timeout from 30 to 15 seconds.
775 kes More restructuring and implementing BSOCK class in place of
777 kes Remove a few unnecessary malloc() tests in crypto code.
778 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
779 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
780 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
782 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
784 kes Fix Verify InitCatalog. The attributes were not pointing to the
785 correct saved location.
786 kes Implement message callback so that GUI is sure to get all
787 daemon messages. Currently displayed in a dialog in bat.
788 kes Ignore SIGUSR2 (Bacula timer) in bat.
789 kes Apply regress patch from bug #859 to allow regress to work
790 with Solaris compiler.
792 kes Begin adding TLS support to bat.
793 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
794 clean up lex.c and make it more readable.
796 kes Move more bnet functions into the BSOCK class.
797 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
798 kes Complete change of berrno strerror() method to bstrerror()
802 kes Cleanup incorrect email addresses in bsmtp.
803 kes Make bat display initial messages rather than discard them.
805 kes First cut of adding .mod to the run command.
806 kes Implement auto display of messages in bat.
807 kes Enhanced preferences to allow all Bacula output to be
810 kes Try to make bsmtp date routines more generic.
811 kes Fixed bug #856 autochanger documentation.
812 kes Rework bsmtp date editing for Win32. This fixes bug #854.
813 kes Add new cats entry point so Win32 builds.
815 kes Attempt to fix bsmtp date editing on OSes without %z editing.
817 kes Do better checking for the MySQL 64 bit libraries looking for both
818 .a and .so libraries.
819 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
820 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
821 kes Require the thread safe version of MySQL during configure. Thanks
822 to Andre Noll for pointing this out.
823 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
824 continuing in migration code.
825 kes Apply implementation of tray-monitor font derived from gnome-console
826 submitted by Andreas Piesk <a.piesk@gmx.net>
828 kes Eliminate important memory loss in SQLite
829 kes Fixed the batch insert MySQL thread specific data that was not
830 being freed. See cats/mysql.c:db_thread_cleanup().
831 kes Fix restore before command.
832 kes Convert old hdr.name to name() in a few places.
833 kes Implement update jobid command.
834 kes Return all time_t dates in db_get_job_record()
835 kes Stop watchdog in SD earlier.
836 kes Put Pool just after Storage in please mount message.
837 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
840 kes Update the po files.
841 kes Fix Verify InitCatalog by making it cache attributes.
843 kes Change name bacula-bat to bat for man 1 page to correspond to
845 kes Check for client and store NULL pointers in status command. This
847 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
848 kes Fix sign extended editing of %p.
849 kes Clean out a little old #ifdefing in cats/mysql.c
851 kes If time diff between DIR and FD is more than 600 seconds convert
852 INFO message to WARNING.
853 kes Implement heap size display in status for all daemons.
854 kes Attempt to fix MySQL db open memory loss (not successfull).
855 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
856 kes Eliminate memory loss in MySQL (possibly other SQLs) during
857 Query. This looks like a MySQL but but by doing extra releases,
858 the memory goes away. This should fix bug #847.
860 kes When backup fails, cancel SD before waiting for sd termination.
861 kes If SD is waiting for FD to connect during cancel, wake up the
863 kes Fix fsf code so that errno is correctly reported.
864 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
866 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
867 so that Bacula doesn't later stumble into a seg fault.
868 kes Use the term Restore Client in the restore Job report.
869 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
870 the original job's FileSetId.
871 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
872 spooling in migration jobs. Not yet tested.
873 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
874 reading conf file from a pipe. However, do it with open_bpipe()
875 rather than popen. Not yet tested.
877 kes Fix an ugly bug where the VolCatBytes were getting updated
879 kes Implement bconsole memory command that prints current memory
880 usage, plus smartalloc dump.
881 kes Clarify some error messages in backup, admin, and migrate.
882 kes Shrink label dialog to smaller size.
883 kes Invert Cancel OK buttons on restore to be OK Cancel.
884 kes More strerror() to bstrerror() conversions.
886 kes Start implementing bstrerror() in place of strerror().
887 kes Stripping path -- seems to work.
889 kes Prevent door and port files from being restored (mostly
891 kes Free an unreleased buffer in compat code.
892 kes Change console Job name from *Console* to -Console- to eliminate
893 Win32 filename problems. Put Win32 path separator when creating
894 Console file. This fixes bug #846.
895 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
897 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
899 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
900 to force Win32 error message.
902 kes First cut strip path. The data should be passed to the FD,
903 but nothing is done with it yet.
904 kes Enhance the digest and signature routines in the crypto
905 library to accept a JCR and to use it to print error messages
906 so that they will go in the Job report rather than the daemon's
908 kes Simplify some of the verify signature code.
909 kes Simplify a few of the alternative returns in the signature
912 ebl Use only POSIX regex instead of GNU regex in breg.c for
913 File relocation. It fix broken freebsd compilation.
914 kes Convert all other Dir files to use new ua class message
916 kes Tentative fix for missing digest signature in bug 807.
917 kes Correct handle problem in new win32_ftruncate routine.
918 kes Convert ua_purge.c and ua_update.c to use new ua class
919 message routines for bat.
921 kes Correct incorrect installation of LICENSE in Win32 installer.
922 kes Display LICENSE at the beginning of the Win32 install.
923 kes Attempt to correct the need for the png files to be installed
925 kes Reapply my bat.conf install script in qt-console. I think I
926 editted bat.pro instead of bat.pro.in and it was lost.
927 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
928 the /var/lock/subsys for subsysdir. Also corrects typos in the
931 kes First cut update job.
932 kes Correct configure to include qmake of src/qt-console directory.
934 kes Make restore job yes/mod/no print in one command so GUI works.
935 kes First cut implementing backup and restore client.
936 kes Correct editing in Verify output that caused a seg fault.
938 kes Insure that bat.conf is not overwritten during installation.
939 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
940 while I was implementing migration in March 2006 !
942 ebl Cleanup file relocation, using char *RegexWhere instead of
943 char *where + bool where_use_regexp
944 kes Update some manpages and add bat manpage.
945 kes Make a first cut at converting bacula.spec.in for bwx-console
947 kes Apply patch from John Goerzen to add hostname as fourth argument
948 to make_catalog_backup script.
949 kes Fix typos I introduced into bsmtp.c
950 kes Make pm_strxxx() routines handle input of NULL pointer. This
951 is to protect from NULL pointers returned from SQL databases.
952 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
953 kes Add more debug to FIFO code -- fix fifo regression test.
955 kes Implement posix_fadvise in FD, and for reading spool files in SD.
956 kes Add thread timer to bnet_connect() to break from OS if wait time
959 kes Update Win32 build to include new files, new symbols, and
961 kes Implement socket level heartbeat (tcp_keepidle)
962 ebl Commit File relocation patch
963 kes Make bat have 'make install' target.
964 kes Warn during install if old gnome-console binary found.
965 kes Warn during install if old wx-console binary found.
966 kes Add -8 option to bsmtp command line to add content type utf-8.
967 Fixes bug #809. (Character coding problem in bsmtp).
968 kes If < is found in target (from, to, cc) then do not enclose the
969 target in < > in bsmtp. Fixes bug #772 (malformed address).
970 kes When printing certain items in dbcheck, stop after 300000.
971 Fixes bug #822. (dbcheck loops).
972 kes Incorrect status in Dir after waiting for mount with poll set.
975 kes Extend idea of Prefer Mounted Volumes to mean a volume about
977 kes Print waiting to reserve a device every 5 mins.
979 kes Don't call close_part in label.c if tape and relabel.
980 kes Don't free volume if busy in close() -- should help with
982 ebl Fix #824 RunScript bug (After script could be execute twice)
983 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
984 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
985 Add a regression script to test RunScript
987 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
990 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
991 deprecated. No additional bugs will be fixed, and they will be dropped
992 in a future release (probably 2.4.0).
993 kes Change name of wx-console to bwx-console to make it more Bacula
995 kes Change the name of gnome-console to bgnome-console to make it
998 kes Some time in March, a Feature Request with patch from Jorj Bauer
999 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1001 The ability for the director to validate a Client (FD) CN against
1002 an arbitrary set of patterns rather than the hostname, with
1003 A new 'TLS Allowed CN' set of directives which are implemented
1004 in the Client resource. Then pattern matching is used in place
1005 of hostname matching against the Certificate's CN. As an example, we
1006 have certificates which (a) use a local CA, and (b) have a CN of the
1008 kes Add new/changed entry points to Win32 build
1009 kes Create unaccepted-projects for projects that are not accepted.
1010 kes Simplify locking in the reservations system.
1011 kes Add more debug code in reservations.
1012 kes Make sure error condition on reserving a volume is handled correctly.
1013 kes Correct handling of volume_in_use.
1014 kes Correct handling of initializing a device.
1015 kes Move handling of broadcasting releasing a device into release_device().
1016 kes Correct attaching dcr to dev so that it is only done if device
1017 is properly initiated.
1019 kes Locking debug level tweaks in SD.
1020 kes Tweak new Volume code.
1022 kes Add exec external-command [wait-seconds] to bconsole. This
1023 executes the external-command. Note! normally external-command
1024 should be enclosed in double quotes.
1025 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1026 it should normally be off in a production system.
1028 kes Implement die command for SD so that we can force it to dump.
1029 kes Implement SD lock debug code.
1030 kes Implement new algorithm for keeping Volume list in SD. It
1031 is now owned by the device.
1033 kes Implement new code for freeing in use volumes that should
1034 resolve if not all, some of the problems of multiple drive
1035 tape conflicts described in bug 801.
1037 kes Fix gui/bacula-web/images files in svn.
1038 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1040 ebl Fix a bug in batch mode (in string escape)
1041 kes Correct migration prune SQL typo that crept in in a
1042 recent 2.1.x change.
1044 kes Move bnet_despool() into class in bsock.c
1045 kes Modify job report to include director name and Build OS.
1046 kes Move drop root privilege and check_catalog() before fork.
1047 kes Add update database scripts (version 9 to 10) to updatedb directory.
1049 ebl Check size and age of each file after its backup to see if
1050 it has changed during backup, if 'checkfilechanges' is set.
1051 The FD will do an extra check (stat(2)) after
1052 each file backup. mtime, ctime and size are compared with
1053 'before backup' information. If time or size mismatch, an
1054 error message will be generated. You must upgrade FD to use it.
1056 kes Make database name and user configurable
1057 --with-db-name=xxx --with-db-user=xxx
1058 kes Add back database type to message.c for debugging.
1060 kes Implement dir_sql() which issues an SQL query.
1061 kes Modify bat medialist to use dir_sql() and do some minor C++
1062 formatting as well as eliminating a number of pointers, simplifing
1065 kes Fix some of the mtx-changer grep commands for tape label readers.
1066 kes Convert a number of bsendmsg into the appropriate send/warning/error
1067 message class calls.
1068 kes Suppress the using database message in the .sql command.
1069 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1071 kes Add context menu for floating a window.
1072 kes Some minor cleanup and name changes in qt-console
1073 kes Add doing mt setblk 0 in Win32 mtx-changer.
1074 kes Apply Martin's bug fix to move definition of ENODATA for
1076 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1077 sqlite2 and sqlite3.
1079 kes More pruning cleanup.
1080 kes Turn on wait_for_drive by default in mtx-changer.
1081 kes Turn on Batch insert code by default as it now passes regression.
1082 kes Add ./configure --enable-bat to enable building of Bat.
1083 No install yet though.
1085 kes Implement a new .sql command for bat.
1086 kes Implement code to turn off pruning in obtaining the next volume.
1087 Pruning is turned off for the status dir command, but turned on
1088 for SD requests and for the list nextvolume command.
1090 kes Correct Qmsg() that was not updated correctly when committing a
1091 previous change (probably the recent TLS patch).
1093 kes Write new subroutine is_volume_purged() that explicitly checks
1094 if the Volume is purged, and if so marks it as such. This should
1095 resolve problems reported about needing to mount twice to recycle
1097 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1098 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1099 amount of duplicated code.
1100 kes Do volume pruning only for the Media Type desired (reduces pruning time
1101 if multiple Media Types are in the same pool).
1102 kes Implement more detailed info in the Job report for the Bacula version
1104 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1106 ebl Add bbatch tool to bench database and insert mode.
1107 Fix sql quote stuff in batch mode
1108 Fix sql stuff for mysql
1110 kes Correct problems with am/pm scheduling. Fixes bug #808.
1111 kes Implement new prunning code that prunes up to 1000 jobs at
1112 the same time. The same technique can be applied to a number
1113 of other prune/purge subroutines.
1114 kes Add an insanity check when starting a new tape job to ensure
1115 that the tape position has not been changed. If so fail the
1117 kes Fix Win32 build for dlls to add the folllowing:
1118 src/lib/bsock.c -- new file with new entry points
1119 src/lib/dlist.c -- new entry points
1120 src/cats/sql_create.c -- new entry point
1121 src/cats/sql_cmds.c -- new DATA item exported
1123 ebl batch mode cleanup bscan-test is ok now.
1124 kes Implement SD code to check length of disk volume before appending.
1126 kes Correct return status on db_batch... routines.
1127 kes Add call to db_write_batch_file_records() to migration code.
1128 ebl Fix AfterJob timing
1129 kes Move the checking of the database in initializion of the Director
1130 to after we drop privileges. This avoids the need for both root
1131 and bacula access to the DB.
1132 kes Correct a misplaced variable definition in src/filed/backup.c
1133 kes Correct how the new batch insert db_create_attributes_record()
1134 uses the arguments. Caused a seg fault in bscan.
1135 kes Implement lock() and unlock() methods in DEVICE class.
1136 Implement block() and set_block(xx) methods in DEVICE class.
1137 kes Modify bnet_connect() so that it uses time() to check for the
1138 wait time expiring (on some OSes, some system calls may not
1139 return immediately).
1140 kes Modify Verify to obtain the previous JobId when it is actually
1141 running rather than at schedule time (as it was in 1.38.x).
1142 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1144 kes When checking pid in pid file, continue running if the pid is
1145 the same as ours. This occurs on IRIX after a system crash.
1148 kes Extend new GUI API.
1149 kes Make the ua structure a class, and implement send_msg(),
1150 error_msg(), warning_msg(), and info_msg().
1152 kes Apply fix from for building wx-console on the Mac from
1154 kes Implement new select mechanism for GUI programs.
1155 kes Reorganize initialization of stackedWidgets in bat.
1157 kes Add updated nagios plugin supplied by Christian Masopust.
1159 kes More bat implementation.
1160 kes File migrate bug with Pool Occupancy using mediaid instead
1161 of jobids. Fixes bug #795.
1162 kes Fix orphaned buffers in filed backup and verify due to
1163 crypto buffers not freed during errors. Fixes bug #789.
1164 kes Extend new GUI api code to tree commands.
1165 kes Ensure that tree and dot commands check console ACLs.
1166 kes Permit marking directory with trailing slash.
1167 kes Allow 20 console connections (instead of only 10).
1169 kes Add smartctl call to bacula-sd.conf as an example of getting
1172 kes Modify jobq.c to let simultaneous restore jobs run. This may
1173 cause them to fail if they cannot get a drive.
1174 kes Add Client Connect Wait to Storage daemon to permit users to
1175 modify the time the SD waits for a FD connection.
1177 kes Correct virtual changer check which was backwards. This caused
1178 volumes to be unloaded into slots already occupied.
1180 kes Apply Command ACL filter to JobId list in restore command.
1181 kes Correct typeo in var.c patch.
1183 kes Don't let Bacula prune File or Job records for the current Job.
1184 kes Fix variable substitution pad + inc bug reported (with patch)
1187 kes Correct SQLite log table index as reported by Luca Berra.
1189 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1191 kes Begin implementing new comm signals for API.
1192 kes Fix a few places in lib/message.c where the open fd may
1194 kes Continue implementing lib/bsock.c (real class). Make jcr,
1195 who, host, and port private. There are new methods to access
1196 them for non-class use. This required touching a number of files.
1198 kes Add LANG=C to autoconf/randpass so it works with languages other
1199 than English. Fixes bug #788.
1201 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1203 You will not be able to generate Include/Exclude list any more.
1204 It will be fixed soon.
1205 If you want to use this, you can apply
1206 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1208 kes Restore of sockets created false error messages because Bacula
1209 no longer restores sockets, but the code was still trying to
1210 set the attributes on a non-existent file. Reported by a user.
1211 ebl finish RecyclePool feature
1212 Media will takes Pool.RecyclePool
1213 when moving from Scratch to a Pool or when user will do
1214 update volume=xxx frompool
1215 To use it, add RecyclePool = aPool to your Pool resource
1218 RecyclePool = Scratch
1222 kes Expand new BSOCK class adding signal() and new BNET signals.
1223 kes Begin enhancing the dot commands adding a new API function
1224 that returns more information and will make it easier
1225 to interface to the Director from a program.
1227 kes Make DEVICE fd private. Its new name is m_fd, and can be
1228 obtained with dev->fd() outside the class. This is the
1229 first of many DEVICE members to be made private.
1230 kes Implement Michael Renner's idea on having a virtual disk
1231 changer. I made some minor modifications (e.g. I did not
1232 implement the Virtual Changer directive, but simply set
1233 the Changer Command to an empty string.
1235 kes Implement a BSOCK send() method that writes the whole record
1236 in a single write() request rather than in two.
1237 ebl add update volume=xxx recyclepool=yyyy
1238 volume takes recyclepool from pool when using update volume=xxx from pool
1240 kes Fix encryption deblocking bug, which caused some restored files
1241 to be truncated. This fixes bug #763.
1242 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1243 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1245 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1246 ebl Use btime_t instead of uint64_t in media patch.
1248 kes Optimize the use of the database a bit in the Status dir command.
1249 Only open it when needed, ensure that if any previous database
1250 was opened, it is closed.
1252 kes Correct VolCatBytes bug from media patch.
1253 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1254 in the case of orphaned records.
1255 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1256 and File records in 300K chunks to be more efficient. This
1257 idea came from Juan Luis Frances (if I remember right).
1258 kes Apply Eric's scratch patch that moves a purged Volume to
1259 the RecyclePool. Question: how is RecyclePool set? what
1260 happens to the ScratchPool?
1261 kes Apply Eric's media patch that collects read/write media
1262 times as well as byte counts. This patch requires a
1263 simultaneous upgrade of the DIR and SD. Note, there
1264 should be some way to turn off timing. I'm not sure
1265 times are in Bacula units.
1266 kes Apply Eric's batch-insert patch.
1268 kes Update projects list.
1270 kes Implement Include/Exclude file lists in FD as dlists using
1271 the new dlistString class. This permits efficiently having
1272 large include/exclude lists and completes project Item 25.
1273 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1274 console is authorized to cancel the job. This fixes bug
1276 kes Modify SD so that the VolCatJobs medium record is updated
1277 at the beginning of a Job rather than the end. This
1278 fixes bug #775 where exceeding MaxVolJobs caused jobs
1280 kes Added a mutex around getting and setting Volume information
1281 so that multiple simultaneous jobs will single thread.
1283 Switch to using Subversion
1284 kes Remove src/pygtk-console/ from configure
1286 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1287 plus the entrypoints.
1288 kes Apply patch supplied that corrects debug print
1289 in canceling jobs for max run time. Supplied as
1290 part of bug #621, which was previously fixed.
1292 kes Test on job_canceled() and sd_msg_thread_done inside
1293 loop starting the message thread to avoid a race condition.
1295 kes Remove rl_catch_signal from console.c as it conflicted
1296 with the header definition. Fixes bug #765.
1297 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1299 kes Clarify some stored/acquire messages to indicate if the
1300 problem is with read or append.
1302 kes Fix memory leak with storage ids in cats/sql_get.c
1303 kes Terminate watchdog earlier to avoid reference to released
1304 memory -- reported by Jason Austin.
1305 kes Move closing the database from jobq.c to the director daemon
1306 termination routine. This fixes memory leaks for shadow jobs
1307 (i.e. migration jobs).
1308 kes Free up the unique jobid chain items in migrate.c. This fixes
1309 a memory leak problem.
1310 kes Convert some ugly looking for statements to use foreach_alist
1311 in findlib/find.c. This will facilitate converting the structures
1312 to use dlist (for large include/exclude lists).
1313 kes Fix a bug in the btree.c and btree.h routines, then rename them
1314 rblist and add them to be built in src/lib. Include some new
1315 methods written by Rudolf Cejka that make the code more readable
1316 (hides some of the ugly casting).
1317 kes Add set_next() and set_prev() methods which make the code much more
1318 readable. Also add a new dlistString class that facilitates storing
1319 strings in dlists. To be used in the large include/exclude lists.
1320 kes Make some trivial modifications to lib/tree.h that use rblist
1321 rather than dlist for storing the tree links. This was suggested
1322 by Rudolf Cejka. The result of this is that the restore tree now
1323 uses red-black binary trees rather than simple linked lists. This
1324 should give rather dramatic speed improvements for directories
1325 contining large numbers of directories/files (more than 10000).
1327 kes Fix maxruntime bug #621.
1329 ebl Implement the include JobID in spool file name project.
1330 kes Reorder projects file in order determined by Jan 2007 vote.
1331 kes Implement item #12 on project list -- quick release of FD by
1333 kes Fix open of SQLite3 db where user does not have write permission
1334 so that DIR does not crash. Fixes bug #761.
1336 kes Add back missing @ in Win32 Makefile.
1337 kes Change 'Device not configured to autolabel' from INFO
1339 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1340 which should restart an indefinite # of times.
1341 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1342 other DIR specifications.
1344 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1345 Fix path quoting in SQLite scripts.
1346 Fix problems with SHGetFolderPath.
1348 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1350 kes Fix Job restart on error bug that promotes an Inc to a Full
1351 backup. This should fix bug #755.
1352 kes Add qt-console and first cut of code.
1356 kes Fix Bacula->Documentation link on Win32 to point to index.html
1357 instead of bacula.html. Fixed bug #750.
1358 kes Return JobId in db_get_job_record() when JobId==0. This should
1360 kes Do not release source pointers when restarting a failed job.
1362 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1363 This *should* fix bug #747.
1364 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1367 kes Modify USTORE constructor to set an empty store_source string,
1368 and don't copy the store_source string in a cancel. Hopefully
1369 this will fix Arno's seg fault, bug #744.
1370 kes Add back code to disable conio in configure. Fixes bug #743.
1371 kes Correct the Options scanner in the FD to correctly handle
1372 SHA1 option, which was eating the next option. Reported by
1374 kes Add code to indicate when the SD is spooling, spool wait, and
1375 despooling as requested by Alan Brown.
1377 Version 2.0.0 released: 4 January 2007