1 Technical notes on version 2.3
5 kes Fix reserve_volume() so it doesn't release a volume in use
6 (i.e. a volume entry not marked released). This should be
7 the last part needed to fix bug #1018.
9 kes Fix existing switch drive SD code to call autochanger to release
10 any old volume. This must be done to keep the autochanger from
11 releasing subsequently newly reserved volumes in doing a close().
12 This should fix bug #1018.
13 kes Fail if attempting to get console input in batch mode. This
14 should help fail RunScript console commands that are incomplete.
15 kes First cut implementing switch_drive() in SD (not actually called).
17 kes Implement first cut running console commands in a RunScript.
19 ebl Fixes bug #1028 where "Selection Type" option was not usable
21 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
24 kes Add new free_tls() entry point so that Win32 builds.
25 kes Fix compile warning in src/lib/util.c
26 kes Fix entry point for edit_job_codes() so that Win32 builds.
27 kes Fix seg fault Frank Sweetser reports in regression testing
28 on his systems. The problem was that the original author of
29 bsnprintf.c did not take into account the side effects of
30 using ++x in the argument to a #define.
31 kes Make SD protocol backward compatible with version 2.2.x.
33 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
34 because Bacula no longer restores sockets.
35 ebl Always use ignorecase fileset option on win32 FD.
37 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
38 that implements double quoting include names in conf files,
39 and also allows piping input by having the first character
40 be a vertical bar (|).
41 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
42 that implement %f in RunScripts to pass the FileSet name.
43 kes Skip leading | when lex input comes from a pipe as suggested
44 by Michael Stapelberg <michael@stapelberg.de>.
46 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
47 Nerijus Baliunas <nerijus@users.sourceforge.net>
49 kes Implement Plugin Directory and plugin events.
51 kes Implement a security enhancement: TLS authentication but no
52 encryption. Enabled by setting 'TLS Authentication = yes'.
53 Note when this is on, TLS encryption is turned OFF!
55 kes This patch corrects a problem where the maximum concurrent storage
56 jobs counter gets out of sync during restore jobs causing jobs to
57 'wait on max Storage jobs'. This patch fixes bug #1009.
59 kes This patch fixes bcopy so that it produces correct Volumes.
61 kes This patch eliminates spurious output to the console during a VerifyVolume
62 job that contains encrypted data. It fixes bug #1024.
64 kes This patch prevents the 'status dir' command from trying to use a scratch
65 volume and possibly moving it from one pool to another. This patch fixes
68 kes Add new include to postgresql.c suggested by Marc Cousins so
69 that it compiles correctly with pgre version 8.3.
71 kes Fix --archivedir addition to configure. Replace it with
72 --with-archivedir in configure.in This fixes the regression
74 kes This patch fixes bug #1012 where the job is canceled because
75 of Max Run Time exceeded when the job has not yet started.
77 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
78 one 'part' to write. Instead of each part being stored on disk,
79 written to DVD, then deleted from disk, all parts are written to disk,
80 and only the last is written and deleted from disk.
81 kes This patch fixes the status command to include the formating string for
82 JS_AttrInsterting. It fixes bug #1021.
83 kes This patch should fix the Mac OS X build problem on the latest
84 Darwin, where sys/types.h was not included correctly (apparently
85 due to a change in the Mac headers). The solution was to explicitly
86 ensure that it is defined for the ./configure.
87 This patch also has a rebuild of configure that includes the Debian
88 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
89 kes This patch should ensure that queued messages to the console are
90 displayed as soon as possible. It should fix bug 1007, but has been
93 kes This patch fixes the infinite loop when trying to increase the
94 maximum number of volumes in a Pool during the add command.
95 This patch fixes bug #1008.
99 db Remove extra data on estimate command in joblist for bat.
101 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
102 really change anything, but is the beginning of doing it *right*.
103 To do it completely right the LastWritten date must be passed to
104 the SD, but it is not yet done.
105 kes Minor tweaks to some bat restore SQL.
106 kes This patch fixes bug #1003 where putting the message output from
107 a Verify job into the catalog results in a recursive loop. The problem
108 seems to show up only with postgresql (to be verified).
109 kes Correct %x to %p in postgresql debug statement.
111 kes Fix bug #942 where lots of emails where generated when the heartbeat
112 interval was low and Bacula wanted a different tape from the one in
115 ebl Add new SD despooling attributes and Dir inserting attributes
116 job status codes in the catalog (Status table).
118 ebl Use qmake-qt4 instead of qmake when available (debian system).
120 kes Add a security warning to src/cats/make_catalog_backup.in indicating
121 that passing the password via the command line (arg 3) is insecure.
122 This responds to bug #990 (it doesn't fix it).
124 kes Set default debug_level to zero. This corrects bugs #991 and #993.
125 kes Fix a crash in bat when it cannot connect to the Director for example
126 if the Director is not running.
127 kes Remove redundant INDEX (JobId) from File table in the trunk.
129 kes Make explicit exception to GPL in LICENSE to permit linking
130 the Win32 FD with Microsoft VSS code.
131 kes Apply the Solaris package patch from
132 Masopust, Christian <christian.masopust@siemens.com>
133 kes Apply the patch to optionally add a timestamp in the debug output
134 submitted by Mariusz Czulada <manieq@wp.eu>.
136 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
137 backend (sql_strerror). Fixes bug #989
139 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
140 It applied with no problems.
141 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
143 kes Redirect stderror to stdin on mt status command in mtx-changer.in
144 since the status is returned on stderr on Solaris.
145 kes Activate Close button on tray-monitor window. This fixes
147 kes Check for NULL item in parse_conf.c before calling it. In the
148 case of Device, there is no item and this caused a seg fault when
149 Device appears in the conf file.
150 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
151 avoids pulling in config.h multiple times in some new code.
153 kes Fix spurious warning message printed when creating a volume with
154 a LabelFormat. This fixes bug #976.
156 Release Version 2.2.5
158 kes Add JobId in place of Job name in all the Jmsg() output.
159 kes Correct the APP_DESC for the Win32 storage service (remove an e).
161 kes Make maxvol-test and new more strict maxvol2-test work.
162 kes Print JobId in all Jmsg() job output.
164 kes Add new SD despooling attributes and Dir inserting attributes
165 job status codes. This fixes bug 961.
166 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
168 kes Fix doc issue. This fixes bug #963.
169 kes Fix listing performance problems in bat. Pointed out by
171 kes Remove old debug code.
172 kes Fix bat code that tests for Win32. This should fix bug #968
173 kes Query 5 list wrong Vol after migration. This fixes bug #960
175 ebl Fix #969 where user can't change Replace option in restore menu.
177 kes Save jcr in thread specific data (tsd) for each thread.
178 kes Make Dmsg() print JobId as -%u.
179 kes Make Jmsg, Emsg, and others automatically pickup the jobid
180 for the thread if it exists.
181 kes Remove old reservation debug jid code.
182 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
183 ebl Add an option that permit to specify spool size in job
184 definition. (Applying patches/testing/spoolsize_per_job.patch).
185 You must upgrade SD and DIR at the same time.
186 dvl Add new configuration item --archivedir
187 dvl Adjust regression tests to use tmp not /tmp. This will allow
188 multiple concurrent runs of the regression tests.
190 kes Fix race condition that drops final block written to volume.
191 This happens in rare cases with multiple simultaneous jobs
192 when the Volume fills. This fixes bug #964. May be related
193 to bug #935 and possibly #903.
194 kes Eliminate more strerror() and replace with bstrerror().
195 kes Remove BSD getopt and replace with unrestricted IBM version.
196 kes Fix Win32 build for changed calling sequences.
197 kes More tweaks to the mount volume routines to get everything
198 right. Changed variable name from find to have_vol, which is
199 much easier to understand.
200 kes Enhance btimer debug code.
202 kes Fix FD->SD authorization failure, which was due to spurious
203 wakeups from a pthread_cond_timedwait(). Simply check the
204 predicate before continuing. This fixes bug #953.
205 kes Add const char where needed (more to do). Remove temp debug code.
207 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
208 kes Don't overwrite error message in check_tables_version.
210 kes Unlock batch insert tables with same calls used elsewhere.
211 kes Allow starting 59 jobs a second.
212 kes Make SD session key more random.
213 kes Add retry for SQLite opening db if it fails. Probably helps
215 kes Suppress extra error messages during batch insert failure.
217 kes Add jcr to timer packets so if killed message can be sent to job.
218 kes Add JobId to all Dmsg() output.
219 kes Put some FD auth code on dbglvl rather than fixed.
220 kes Return insert attributes error message in db msg buffer to avoid
221 false error messages. Helps fix bug #966.
222 kes Separate batch init error messages. Probably helps fix bug #966.
223 kes Make SD code that contructs attribute insert check string lengths
225 kes If Dir gets an error during inserting attributes, cancel SD.
226 This reduces unnecessary error messages.
228 kes Correct search boolean for getting Volume info
229 ebl Cleanup batch insert code. Probably fixes bug #965.
230 kes Back out one small change to the reservation system (reserving a volume).
231 kes Rework how a Volume is mounted. It is now much more intelligent and
232 will always attempt to use any mounted volume if possible and reduces
233 calls to the Director asking about volumes.
235 kes Turn off some code when batch insert not enabled.
236 kes Edit FD name in connect error messages.
237 kes Rework the reservation system to take into account that the Director
238 might give us a Volume that is different from the current one being
239 used, and to ensure that we don't exceed Maximum Volume Jobs.
240 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
241 fatal error with multiple jobs running'
242 kes Add more debug code in reservation system.
243 kes Implement maxvol-test to check bug #947.
245 kes Add code to handle tray monitor separated from Win32 FD.
246 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
248 kes Add missed return in fixing verify bug -- trunk only.
249 ebl Fix a command parser issue causing a director segfault.
250 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
252 kes Increase the max block size to 4MB fixes bug #957.
253 kes ERABT if user sets min block size > max block size. Fixes bug #956.
254 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
255 is not properly mounted (recognized) during a poll.
256 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
257 Job that has differences reports Verify OK.
258 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
260 ebl Add an option to operate on all pools with update vol parameters.
261 This complete the project 20. Patch from Nigel Stepp.
262 ebl Add history support to bconsole when using readline.
263 Using Ctrl-D to exit doesn't update .bconsole_history
264 kes Modify new volume algorithm to use max MediaId for generating next
265 volume number rather than the count of Volumes. This should essentially
266 eliminate the failure rate if some volumes were deleted. Bug #921.
267 kes Begin implemention of Optimize Job Scheduling.
268 kes Implement restore callback that Dirk and I agreed on for bat
269 restore. This fixes bug #928. Restore of backup of zero files fails.
270 kes Fix SQL Catalog logging which broke with new db_escape_string
273 Release Version 2.2.4
275 kes Fix bacula_cats.def for new db_escape_string().
276 kes Increase size of name string when FD making connection to SD.
277 May fix bug #953. FD->SD connection failure.
279 kes Add code to help Dan debug 2drive-incremental-2disk test.
280 kes Add code to try to fix bug #908.
281 kes Add waits to multiple exit detection code to try to force pid
282 file to always be deleted.
283 kes Restore good dev.tar.gz to rescue set appropriate binary property.
285 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
286 trying to switch drives by checking for blocking before unblocking.
288 kes Cancel storage daemon in all cases where FD reports error. This
289 should fix virtually all cases of bug #920.
290 kes Fix db_escape_string() for MySQL which did not compile.
292 kes Fix error message that was clobbered when Dir tells SD it does not
293 have write permission on Volume. This should fix a minor point
294 in bug #942, but not the main problem.
295 kes Add code to cancel job in SD if FD connection fails. This should
297 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
298 dvl Pass jcr and db into db_escape_string() to enable better escaping
300 kes Fix migration code to get correct Volume name with multiple volumes
301 by skipping |. Fixes bug #936.
302 kes Implement patch supplied by Landon to fix bug #944 where using
303 TLS with bconsole uses 99+% of the CPU.
304 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
306 kes Move patches into patches directory.
308 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
311 ebl Using 'm' in bconsole will show messages like before,
312 and not memory usage.
313 kes Fix bug #935, and probably also bug #903 where files were not
314 restored. MediaId was not properly set in JobMedia record after
317 kes Suppress chown and chmod error messages if the FD is not running
320 kes Apply Martin Simmons' patch that should turn off the new API usage
321 when batch insert is turned off allowing building on older
323 kes Add ./configure search in qwt-qt4 for qwt package
325 kes Bacula is now free of 3rd party GPL copyrighted code!
327 kes Add guid_to_name.c/h which replace idcache.
328 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
330 ebl Detect if new PosgreSQL batch insert API is present.
331 kes Correct incorrect mempool call causing Director crash. Occurs on
332 systems without va_copy().
333 sb Update spec files for 2.2.1 release
335 kes Fix memory pool call in ua_output.c. bug #934.
336 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
337 Add test program to fnmatch.c
339 kes Integrate patch to README.vc8 from
340 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
341 edit it to get it into Unix patch format.
342 kes Implement mkpath.c to replace old FSF makepath.c
344 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
346 Release Version 2.2.1
348 kes Update POTFILES.in
349 kes Cleanup a few underquoted AC_DEFUNs in configure
350 kes Apply patch from Martin Simmons that adds a test for va_copy to
353 kes Fix bug #921 by increasing the number of tries to create a new volume
355 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
356 can be called multiple times. Implement a version for machines
357 without va_copy() that gets a big buffer.
359 kes Integrate more portable zone offset code into bsmtp.c
360 Submitted by Attila Fülöp.
362 kes Fix bad SD->FD return status reported by
363 (James Harper) <james.harper@bendigoit.com.au>
364 ebl Fix a bug in read_close_session which return random status
365 thanks to James Harper
367 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
368 and directory names during restore of single file/directories.
369 kes Add sanity checks to .sql command when string is empty. Hopefully
370 that will resolve Dirks Director crash.
372 kes Apply patch submitted by Martin Simmons that corrects a seg fault
373 in the bsmtp chat subroutine when debug is >= 10.
375 kes Fix Director crash when running bat SQL queries.
376 kes Add David's notes on Item 8: Copy pools.
378 kes Rework projects file to be current and ready for a vote.
379 kes Enhance lex scanner error message.
381 kes Tweak LICENSE file to mention BSD code.
382 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
383 if specified on the ./configure.
384 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
385 This class is intended to allow us to open a second bsock to the
386 Director while in the restore subdialog.
388 kes Fix configure to create bat Makefile before creating dependencies.
389 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
390 kes Add a tooltip to the tray monitor.
391 dvl Set the Director's PID file before dropping privs. This fixes
394 kes Update AUTHORs file
395 kes Increase the default max concurrent jobs to 20 in FD and SD to
396 correspond with the default .conf files.
397 kes Rewrite the Win32 service routines. This eliminates the 3 copies
398 some different, of the same file created by RN when porting the
400 kes Rearrange some of the Win32 directories and the placement of the files
402 kes Set DEVELOPER flag in version.h
404 ========================================================================
405 Release Version 2.2.0
407 kes Apply a second doc patch from Marc.
408 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
409 improves the tips section that discusses how to setup multiple
412 kes Update bat README file.
413 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
414 corrects a typo in the Recycle status check in db_find_next_volume().
415 This will probably fix a number of annoying problems with multiple
417 kes Modify most of dird/msgchan.c to use bsock class calls rather than
418 bnet calls -- no functionality change.
420 kes Modify the Verify output to specify if files are missing on
421 the Volume(s) or disk. Fixes confusion in bug #916.
422 kes When more than one Volume is read in a migration job, the last
423 Volume bytes reported are from the last read volume rather than
424 the last written volume. Fixed. This fixes bug #910.
425 kes Fix display of Recycle flag after update volume=foo recycle=yes.
426 It previously printed New Recyle flag is: no. This fixes bug
429 kes Correct seg fault when switching tape drives during restore.
430 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
431 be used until after 2.2.0 release.
433 kes Remove fnmatch() in SD that permitted wild card specifications.
436 kes Fix %g in filename returned by SQL for browse tree reported by
438 kes Fix configure so that it puts config.out in the cwd rather than
440 kes Attempt to fix the locking problem reported by Eric in bug #906.
441 kes Make berrno class to leave errno unchanged after constructor call.
442 kes Make bnet_server use the heap rather than the stack to allocate
443 its socket fd pointers to avoid a crash at termination. Problem
444 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
446 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
447 and putting it in depkgs-qt along with Qt4.3.
449 kes Rework code in acquire.c that switches drives for reading when
450 the Media Type does not match. This should fix bug #906
452 ebl Fix a director segfault during job setup #907
453 kes Correct seg fault in postgresql when first operation returns no
454 rows. Fixes Dirks File browser problem seg fault with bat.
456 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
457 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
460 kes Implement PopUp YES/NO dialog for bat.
462 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
464 kes Correct RunScript to terminate job in FD on failure.
465 kes Change abort_on_error and AbortJobOnError to fail_on_error
466 and FailJobOnError in RunScripts.
467 kes Minor tweaks of code formating in RunScripts, principally to
468 avoid depassing 80 columns.
470 kes Eliminate one #ifdef Win32 in bsmtp
471 kes Implement grow tool to grow a file for testing very large databases.
472 kes Add big-vol-test to test Bacula seeking with > 5GB.
475 kes Modify find_next_volume() to return all values in Media record.
476 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
480 kes Update Release notes
482 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
483 Warning, in previous beta version, all media get from scratch keep their
486 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
487 This should fix bug #842. Made a note to look at removing the temp
488 files at the end of the install.
489 kes Add ability to mount and unmount a file device providing it is
490 marked as being removable and has the appropriate mount and unmount
491 commands defined in the Device resource. This fixes bug #830.
492 kes When applying a storage override, release all previous storage
493 definitions rather than just prepending the new storage.
494 This should prevent a good deal of confusion.
496 kes Implement ./configure search for qwt libraries.
498 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
499 Win32 FD. This should fix bug #893.
500 kes Remove an unnecessary beep in Win32 init code.
501 kes Update copyright dates in Win32 executable about boxes.
502 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
503 code with a BSD getopt.c and getopt.h.
504 kes Remove sched.h from the Win32 compat directory -- not used.
505 kes Remove the Exit menu item from the Win32 tray monitor. If you really
506 need to shut it down, do it through the services panel or the command
508 kes Remove some inappropriate Bacula FSFE copyrights.
509 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
510 kes Fix regress config non-portable test as pointed out by
511 Florian Heigl <florian.heigl@gmail.com>
512 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
513 as pointed out by Florian Heigl <florian.heigl@gmail.com>
515 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
516 Reported by Frank Sweetser.
520 kes Fix client-only build.
521 kes Integrate client-only fixes for bsys (initgroups) and conio from
522 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
523 kes Make arguments to get_scratch_volume() in same order as other
525 kes Rework the prune_volumes() subroutine so that after purging and
526 no volume found in desired pool, it will check for a scratch
527 volume. This prevents recycling the whole scratch pool.
528 kes Add code to status storage to print boffset_t (largefile support).
530 kes Move qwt (Graphics libarary for Qt4) to depkgs.
531 kes You now need a --with-qwt=<dir> to be able to build bat.
532 kes Update src/win32/cats/bacula_cats.def to include the new
533 db_get_query_dbids() call on Win32.
535 kes Correct a problem when selecting a scratch volume and moving
536 it to another pool that lost some columns.
537 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
538 kes Enhance Autochanger error messages to include Volume and device name.
539 kes Rework prune_volumes() code to take account of InChanger flag,
540 and to handle recycling volumes going to the Scratch pool and
541 current pool because the RecyclePool directive.
542 kes Implement a better and more efficient db_get_query_dbids() to
543 handle creating and passing back a list of DBIds.
547 kes Start work on new more efficient DBId subroutine. First use
548 will be for recycling volume to Scratch inchanger.
549 kes Increase number of JobIds in pruning from 1000 to 10000.
550 This to be replaced by above routine.
551 kes Begin implementation of building Qt4 on Win32.
552 kes Correct typo in fix I added for bad TLS shutdown.
553 kes Pull 2.0.3 patches into patches directory.
554 kes Update Release notes. Include qt-console in line count.
555 kes Update Projects file.
557 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
558 bug in migration code where a job that spanned two volumes
561 kes Implement new BST_DESPOOLING blocked state. Change from locking
562 during despooling in SD to blocking. This means that other threads
563 can work with the device structure, in particular the reservations
564 system while despooling.
566 kes Fix return in reservation message queue that missed clearing
567 the jcr lock (implemented 26Jun07 below).
568 kes Rename a number of dev methods to make locking function names
570 kes Document locking in lock.c. Move lock structures to new file
573 kes Move reservations message lock to lock jcr only this
575 kes Move main SD locking code into lock.c (new file).
576 kes Update Win32 build to include lock.c
580 kes Dirk committed the qwt library code for drawing graphs in bat.
581 kes Tweak install of qwt so that it is integrated with ./configure.
583 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
584 out by Eric (my typo).
585 ebl Fix configure.in to get batch mode enable
586 kes Return correct string from authenticate.cpp in bat when connecting
588 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
589 spurious line drops when using TLS.
590 kes Do not file reparse points when restoring a file that already
593 kes Implement Windows reparse points -- similar to directories, but
594 we do not descend into it. This is a first cut. They seem to
595 be backed up, but restore is not yet tested.
596 kes Remove restore_blocking in tls code when shutting a socket to leave
597 it in blocking mode. Hopefully this will fix the encryption bug
598 reported by Frank Sweetser.
599 kes When opening a file for backup, tell the OS that we are going to
600 read it sequentially -- optimization.
601 kes Change variable names in authenticate_director() to not conflict
602 with member names in bat. Caused great confusion with compiler,
605 kes Queue openssl error messages in case of comm problem.
606 kes Do shutdown() call if socket terminated.
607 kes Remove some duplicated code in tls.c
608 kes Move more of the bsock member variables into private and access
610 kes Add Frank Sweetser's tls-test to the regression suite.
612 kes Add Swedish sv.po file
614 kes Don't print clock skew message in FD if less than 3 seconds diff.
615 kes Add a bit of VSS info to status client.
616 kes Implement a first cut of Vista VSS, using Win2003 code.
620 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
621 loaded tape but uses first drive).
622 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
623 This was indeed a Win32 issue.
625 kes Simplify search of autochanger for in-use Volume.
626 kes Fix exit condition of check for in-use volume. kes Remove
627 inappropriate my_postgresql_free_result() in db_close()
629 kes Fix bad return in FD when encryption signature not found.
630 Probably caused a crash.
631 kes Inhibit missing encryption signature error messages for
632 file types where no signature computed.
633 kes Correct inverted check on autochanger in reservation system.
634 kes Tweak debug code in autochanger reservation.
636 kes Add some additional locking in the cats directory in subroutines
637 that modify packet variables called from batch insert.
638 kes Rework how dcrs are allocated. new_dcr() can now be called
639 with an existing pointer, and it will simply clean it up.
640 This allows the reservation system to test various different
641 devices, and will permit easy device changes.
642 kes A bunch of changes all over to handle new new_dcr() calling
644 kes Work more on the Volume management in the SD. Remember Volumes
645 for tape drives and for autochangers (even virtual disk changers).
646 kes When looking at the Volume list to reserve a drive, handle
647 autochanger names correctly by interating through the changer
648 devices. Also call the Director to see if a Volume is suitable
650 kes Fix some bugs in bscan. Make sure all media records are written.
651 Make sure that valid JobMedia records are written for disk files.
652 Previously they were completely wrong.
653 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
654 that the URLs don't change and so that the developers will all
655 work off the same copy. Rebuild from scrach.
656 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
660 kes Fix seg fault in FD from incorrect digest size.
661 kes Fix argument to non-OpenSSL crypto.c subroutine.
665 kes Remove a few malloc()s from the encryption code.
666 kes Use the class calls to bsock in filed/backup.c and restore.c in
667 place of the old bnet_xxx code.
668 kes Implement code that does an on the fly calculation of the
669 signing digest during restore of encrypted files. It makes
670 a best guess at the algorithm, and if it is not correct, will
671 then revert to the old code which reads the file after it is
673 kes Implement at least one missing crypto stream in stream_to_ascii()
674 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
675 #877 where a reload with bad syntax causes Dir to exit.
677 Cut: 2.1.14 beta (not released)
679 kes Do not free a volume on a tape drive until another volume is
680 mounted and read, or the autochanger unloads the volume.
681 This should help the SD re-use volumes that are already mounted,
682 and should fix bug #886.
683 kes Apply patch from user brettedgar that allows gnome2-console include
684 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
685 kes Apply patch from Lucien Weller that fixes day of week calculation
686 because of DST flag problem. Fixes bug #887.
688 kes Move find_next_appendable_volume() to after acquiring a valid device
689 in reserve.c. This fixes bug #864 -- confirmed by reporter.
691 kes Unable to reproduce bug 872. However added additional testing for
693 kes Bug #874 resolved by documenting SQLite limitations.
694 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
695 kes Bug #881 resolved by removing typo in mtx-changer script.
696 kes Made Frank Sweetser's wiki the official Bacula wiki with his
697 approval. Added a link to the wiki on the web page, and implemented
698 a backup from http://paramount.ind.wpi.edu
700 kes Fix update allfrompool to pass pool name.
702 kes Convert to pure GPL v2 license.
703 kes Fix sscanf problems reported by Peter Buschman that caused
704 a bus error on Solaris.
705 kes Rework (simplify) the select prompt in bat.
706 kes Move get_jobid_from_tid() into lib and create a
708 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
709 should definitely fix the problem of lost error messages in the
711 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
712 kes Eliminate tcpd.h from the project. Enclose the #include from the
713 library with extern C ...
714 kes Add print of signal name when a signal is trapped.
718 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
720 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
721 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
722 makes SQLit3 run 30 times faster, though a bit less safe.
723 kes Implement --with-batch-insert in configure and detection of thread
724 safe libraries. It is on by default, but turned off if no thread
725 safe library (e.g. SQLite 2) is available.
727 kes Fix Bacula PostgreSQL buffer overruns.
728 kes Do better checking for NULL results returned from PostgreSQL;
729 implement retry for failed queries; clear results buffer after
730 failed query. Hopefully this will correct the PostgreSQL failures.
732 kes Implement algorithm to handle only one appendable volume with
733 Prefer Mounted Volumes = no.
734 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
735 returned from a query.
736 kes Make volume lock recursive.
737 kes Implement an additional volume reservation algorithm that
738 starts by considering all reserved volumes then uses the
739 old brute force algorithm of searching the resources to
740 find a suitable device.
741 kes Add new reservations debug code and refine the old code.
742 kes Update the win32/dll/bacula.defs file.
744 kes Tweak reservations algorithm to permit a few more cases, i.e.
745 volume reserved, but on different drive, ...
746 kes Enhance SD status to include Pool and Media Type for drive in a
747 more readable format (a bit longer).
748 kes Fix PostgreSQL double free.
750 kes Minor refactoring of restore decryption code.
751 kes Add code to smartall.c to detect double free of a buffer.
753 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
754 so that bsmtp will create a correct email address (mailbox only).
755 kes Modify 'memory' command so that the buffers are listed as 'In use'
756 to avoid confusion with Orphaned buffers.
757 kes I reworked the OpenSSL include/lib flags to be handled in
758 the standard Bacula way, which should fix bug #863 concerning
759 non-standard OpenSSL libraries.
761 kes Implement Help Browser window for bat.
762 kes Fix reload bug that reset StorageId to zero.
764 kes Fix TLS #ifdefing when TLS turned off.
765 kes Ensure that when labelling a tape with Slot=0 that InChanger
767 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
769 kes Add StartTime to final uar_sel_jobid_temp query so that we can
770 add DISTINCT (required by PostgreSQL).
771 kes Implement BSOCK authenticate_director() method. Eventually will
772 authenicate all daemons.
773 kes Move several more functions into the BSOCK class.
775 kes Add code to tell the OS that we no longer need a cached
776 file that we were reading. In findlib/bfile.c. Also,
777 only cache files that we are reading. Thanks to
778 Tobias Oetiker <tobi@oetiker.ch> for the idea.
779 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
780 kes Implement script to automatically generate cats and dll .def
782 kes Update README.mingw32 to include new .def file generation.
783 kes Correct typo in UTF-8 error message as reported by:
784 jhernandez <julianhernandez@gmail.com>
785 kes Add additional sm_check() code on debug level 1.
786 kes Set default debug level to 1.
787 kes Trap SIGABRT in attempt to get traceback.
789 kes Reduce bat connect timeout from 30 to 15 seconds.
790 kes More restructuring and implementing BSOCK class in place of
792 kes Remove a few unnecessary malloc() tests in crypto code.
793 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
794 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
795 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
797 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
799 kes Fix Verify InitCatalog. The attributes were not pointing to the
800 correct saved location.
801 kes Implement message callback so that GUI is sure to get all
802 daemon messages. Currently displayed in a dialog in bat.
803 kes Ignore SIGUSR2 (Bacula timer) in bat.
804 kes Apply regress patch from bug #859 to allow regress to work
805 with Solaris compiler.
807 kes Begin adding TLS support to bat.
808 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
809 clean up lex.c and make it more readable.
811 kes Move more bnet functions into the BSOCK class.
812 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
813 kes Complete change of berrno strerror() method to bstrerror()
817 kes Cleanup incorrect email addresses in bsmtp.
818 kes Make bat display initial messages rather than discard them.
820 kes First cut of adding .mod to the run command.
821 kes Implement auto display of messages in bat.
822 kes Enhanced preferences to allow all Bacula output to be
825 kes Try to make bsmtp date routines more generic.
826 kes Fixed bug #856 autochanger documentation.
827 kes Rework bsmtp date editing for Win32. This fixes bug #854.
828 kes Add new cats entry point so Win32 builds.
830 kes Attempt to fix bsmtp date editing on OSes without %z editing.
832 kes Do better checking for the MySQL 64 bit libraries looking for both
833 .a and .so libraries.
834 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
835 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
836 kes Require the thread safe version of MySQL during configure. Thanks
837 to Andre Noll for pointing this out.
838 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
839 continuing in migration code.
840 kes Apply implementation of tray-monitor font derived from gnome-console
841 submitted by Andreas Piesk <a.piesk@gmx.net>
843 kes Eliminate important memory loss in SQLite
844 kes Fixed the batch insert MySQL thread specific data that was not
845 being freed. See cats/mysql.c:db_thread_cleanup().
846 kes Fix restore before command.
847 kes Convert old hdr.name to name() in a few places.
848 kes Implement update jobid command.
849 kes Return all time_t dates in db_get_job_record()
850 kes Stop watchdog in SD earlier.
851 kes Put Pool just after Storage in please mount message.
852 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
855 kes Update the po files.
856 kes Fix Verify InitCatalog by making it cache attributes.
858 kes Change name bacula-bat to bat for man 1 page to correspond to
860 kes Check for client and store NULL pointers in status command. This
862 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
863 kes Fix sign extended editing of %p.
864 kes Clean out a little old #ifdefing in cats/mysql.c
866 kes If time diff between DIR and FD is more than 600 seconds convert
867 INFO message to WARNING.
868 kes Implement heap size display in status for all daemons.
869 kes Attempt to fix MySQL db open memory loss (not successfull).
870 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
871 kes Eliminate memory loss in MySQL (possibly other SQLs) during
872 Query. This looks like a MySQL but but by doing extra releases,
873 the memory goes away. This should fix bug #847.
875 kes When backup fails, cancel SD before waiting for sd termination.
876 kes If SD is waiting for FD to connect during cancel, wake up the
878 kes Fix fsf code so that errno is correctly reported.
879 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
881 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
882 so that Bacula doesn't later stumble into a seg fault.
883 kes Use the term Restore Client in the restore Job report.
884 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
885 the original job's FileSetId.
886 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
887 spooling in migration jobs. Not yet tested.
888 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
889 reading conf file from a pipe. However, do it with open_bpipe()
890 rather than popen. Not yet tested.
892 kes Fix an ugly bug where the VolCatBytes were getting updated
894 kes Implement bconsole memory command that prints current memory
895 usage, plus smartalloc dump.
896 kes Clarify some error messages in backup, admin, and migrate.
897 kes Shrink label dialog to smaller size.
898 kes Invert Cancel OK buttons on restore to be OK Cancel.
899 kes More strerror() to bstrerror() conversions.
901 kes Start implementing bstrerror() in place of strerror().
902 kes Stripping path -- seems to work.
904 kes Prevent door and port files from being restored (mostly
906 kes Free an unreleased buffer in compat code.
907 kes Change console Job name from *Console* to -Console- to eliminate
908 Win32 filename problems. Put Win32 path separator when creating
909 Console file. This fixes bug #846.
910 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
912 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
914 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
915 to force Win32 error message.
917 kes First cut strip path. The data should be passed to the FD,
918 but nothing is done with it yet.
919 kes Enhance the digest and signature routines in the crypto
920 library to accept a JCR and to use it to print error messages
921 so that they will go in the Job report rather than the daemon's
923 kes Simplify some of the verify signature code.
924 kes Simplify a few of the alternative returns in the signature
927 ebl Use only POSIX regex instead of GNU regex in breg.c for
928 File relocation. It fix broken freebsd compilation.
929 kes Convert all other Dir files to use new ua class message
931 kes Tentative fix for missing digest signature in bug 807.
932 kes Correct handle problem in new win32_ftruncate routine.
933 kes Convert ua_purge.c and ua_update.c to use new ua class
934 message routines for bat.
936 kes Correct incorrect installation of LICENSE in Win32 installer.
937 kes Display LICENSE at the beginning of the Win32 install.
938 kes Attempt to correct the need for the png files to be installed
940 kes Reapply my bat.conf install script in qt-console. I think I
941 editted bat.pro instead of bat.pro.in and it was lost.
942 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
943 the /var/lock/subsys for subsysdir. Also corrects typos in the
946 kes First cut update job.
947 kes Correct configure to include qmake of src/qt-console directory.
949 kes Make restore job yes/mod/no print in one command so GUI works.
950 kes First cut implementing backup and restore client.
951 kes Correct editing in Verify output that caused a seg fault.
953 kes Insure that bat.conf is not overwritten during installation.
954 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
955 while I was implementing migration in March 2006 !
957 ebl Cleanup file relocation, using char *RegexWhere instead of
958 char *where + bool where_use_regexp
959 kes Update some manpages and add bat manpage.
960 kes Make a first cut at converting bacula.spec.in for bwx-console
962 kes Apply patch from John Goerzen to add hostname as fourth argument
963 to make_catalog_backup script.
964 kes Fix typos I introduced into bsmtp.c
965 kes Make pm_strxxx() routines handle input of NULL pointer. This
966 is to protect from NULL pointers returned from SQL databases.
967 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
968 kes Add more debug to FIFO code -- fix fifo regression test.
970 kes Implement posix_fadvise in FD, and for reading spool files in SD.
971 kes Add thread timer to bnet_connect() to break from OS if wait time
974 kes Update Win32 build to include new files, new symbols, and
976 kes Implement socket level heartbeat (tcp_keepidle)
977 ebl Commit File relocation patch
978 kes Make bat have 'make install' target.
979 kes Warn during install if old gnome-console binary found.
980 kes Warn during install if old wx-console binary found.
981 kes Add -8 option to bsmtp command line to add content type utf-8.
982 Fixes bug #809. (Character coding problem in bsmtp).
983 kes If < is found in target (from, to, cc) then do not enclose the
984 target in < > in bsmtp. Fixes bug #772 (malformed address).
985 kes When printing certain items in dbcheck, stop after 300000.
986 Fixes bug #822. (dbcheck loops).
987 kes Incorrect status in Dir after waiting for mount with poll set.
990 kes Extend idea of Prefer Mounted Volumes to mean a volume about
992 kes Print waiting to reserve a device every 5 mins.
994 kes Don't call close_part in label.c if tape and relabel.
995 kes Don't free volume if busy in close() -- should help with
997 ebl Fix #824 RunScript bug (After script could be execute twice)
998 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
999 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1000 Add a regression script to test RunScript
1002 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1005 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1006 deprecated. No additional bugs will be fixed, and they will be dropped
1007 in a future release (probably 2.4.0).
1008 kes Change name of wx-console to bwx-console to make it more Bacula
1010 kes Change the name of gnome-console to bgnome-console to make it
1013 kes Some time in March, a Feature Request with patch from Jorj Bauer
1014 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1016 The ability for the director to validate a Client (FD) CN against
1017 an arbitrary set of patterns rather than the hostname, with
1018 A new 'TLS Allowed CN' set of directives which are implemented
1019 in the Client resource. Then pattern matching is used in place
1020 of hostname matching against the Certificate's CN. As an example, we
1021 have certificates which (a) use a local CA, and (b) have a CN of the
1023 kes Add new/changed entry points to Win32 build
1024 kes Create unaccepted-projects for projects that are not accepted.
1025 kes Simplify locking in the reservations system.
1026 kes Add more debug code in reservations.
1027 kes Make sure error condition on reserving a volume is handled correctly.
1028 kes Correct handling of volume_in_use.
1029 kes Correct handling of initializing a device.
1030 kes Move handling of broadcasting releasing a device into release_device().
1031 kes Correct attaching dcr to dev so that it is only done if device
1032 is properly initiated.
1034 kes Locking debug level tweaks in SD.
1035 kes Tweak new Volume code.
1037 kes Add exec external-command [wait-seconds] to bconsole. This
1038 executes the external-command. Note! normally external-command
1039 should be enclosed in double quotes.
1040 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1041 it should normally be off in a production system.
1043 kes Implement die command for SD so that we can force it to dump.
1044 kes Implement SD lock debug code.
1045 kes Implement new algorithm for keeping Volume list in SD. It
1046 is now owned by the device.
1048 kes Implement new code for freeing in use volumes that should
1049 resolve if not all, some of the problems of multiple drive
1050 tape conflicts described in bug 801.
1052 kes Fix gui/bacula-web/images files in svn.
1053 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1055 ebl Fix a bug in batch mode (in string escape)
1056 kes Correct migration prune SQL typo that crept in in a
1057 recent 2.1.x change.
1059 kes Move bnet_despool() into class in bsock.c
1060 kes Modify job report to include director name and Build OS.
1061 kes Move drop root privilege and check_catalog() before fork.
1062 kes Add update database scripts (version 9 to 10) to updatedb directory.
1064 ebl Check size and age of each file after its backup to see if
1065 it has changed during backup, if 'checkfilechanges' is set.
1066 The FD will do an extra check (stat(2)) after
1067 each file backup. mtime, ctime and size are compared with
1068 'before backup' information. If time or size mismatch, an
1069 error message will be generated. You must upgrade FD to use it.
1071 kes Make database name and user configurable
1072 --with-db-name=xxx --with-db-user=xxx
1073 kes Add back database type to message.c for debugging.
1075 kes Implement dir_sql() which issues an SQL query.
1076 kes Modify bat medialist to use dir_sql() and do some minor C++
1077 formatting as well as eliminating a number of pointers, simplifing
1080 kes Fix some of the mtx-changer grep commands for tape label readers.
1081 kes Convert a number of bsendmsg into the appropriate send/warning/error
1082 message class calls.
1083 kes Suppress the using database message in the .sql command.
1084 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1086 kes Add context menu for floating a window.
1087 kes Some minor cleanup and name changes in qt-console
1088 kes Add doing mt setblk 0 in Win32 mtx-changer.
1089 kes Apply Martin's bug fix to move definition of ENODATA for
1091 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1092 sqlite2 and sqlite3.
1094 kes More pruning cleanup.
1095 kes Turn on wait_for_drive by default in mtx-changer.
1096 kes Turn on Batch insert code by default as it now passes regression.
1097 kes Add ./configure --enable-bat to enable building of Bat.
1098 No install yet though.
1100 kes Implement a new .sql command for bat.
1101 kes Implement code to turn off pruning in obtaining the next volume.
1102 Pruning is turned off for the status dir command, but turned on
1103 for SD requests and for the list nextvolume command.
1105 kes Correct Qmsg() that was not updated correctly when committing a
1106 previous change (probably the recent TLS patch).
1108 kes Write new subroutine is_volume_purged() that explicitly checks
1109 if the Volume is purged, and if so marks it as such. This should
1110 resolve problems reported about needing to mount twice to recycle
1112 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1113 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1114 amount of duplicated code.
1115 kes Do volume pruning only for the Media Type desired (reduces pruning time
1116 if multiple Media Types are in the same pool).
1117 kes Implement more detailed info in the Job report for the Bacula version
1119 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1121 ebl Add bbatch tool to bench database and insert mode.
1122 Fix sql quote stuff in batch mode
1123 Fix sql stuff for mysql
1125 kes Correct problems with am/pm scheduling. Fixes bug #808.
1126 kes Implement new prunning code that prunes up to 1000 jobs at
1127 the same time. The same technique can be applied to a number
1128 of other prune/purge subroutines.
1129 kes Add an insanity check when starting a new tape job to ensure
1130 that the tape position has not been changed. If so fail the
1132 kes Fix Win32 build for dlls to add the folllowing:
1133 src/lib/bsock.c -- new file with new entry points
1134 src/lib/dlist.c -- new entry points
1135 src/cats/sql_create.c -- new entry point
1136 src/cats/sql_cmds.c -- new DATA item exported
1138 ebl batch mode cleanup bscan-test is ok now.
1139 kes Implement SD code to check length of disk volume before appending.
1141 kes Correct return status on db_batch... routines.
1142 kes Add call to db_write_batch_file_records() to migration code.
1143 ebl Fix AfterJob timing
1144 kes Move the checking of the database in initializion of the Director
1145 to after we drop privileges. This avoids the need for both root
1146 and bacula access to the DB.
1147 kes Correct a misplaced variable definition in src/filed/backup.c
1148 kes Correct how the new batch insert db_create_attributes_record()
1149 uses the arguments. Caused a seg fault in bscan.
1150 kes Implement lock() and unlock() methods in DEVICE class.
1151 Implement block() and set_block(xx) methods in DEVICE class.
1152 kes Modify bnet_connect() so that it uses time() to check for the
1153 wait time expiring (on some OSes, some system calls may not
1154 return immediately).
1155 kes Modify Verify to obtain the previous JobId when it is actually
1156 running rather than at schedule time (as it was in 1.38.x).
1157 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1159 kes When checking pid in pid file, continue running if the pid is
1160 the same as ours. This occurs on IRIX after a system crash.
1163 kes Extend new GUI API.
1164 kes Make the ua structure a class, and implement send_msg(),
1165 error_msg(), warning_msg(), and info_msg().
1167 kes Apply fix from for building wx-console on the Mac from
1169 kes Implement new select mechanism for GUI programs.
1170 kes Reorganize initialization of stackedWidgets in bat.
1172 kes Add updated nagios plugin supplied by Christian Masopust.
1174 kes More bat implementation.
1175 kes File migrate bug with Pool Occupancy using mediaid instead
1176 of jobids. Fixes bug #795.
1177 kes Fix orphaned buffers in filed backup and verify due to
1178 crypto buffers not freed during errors. Fixes bug #789.
1179 kes Extend new GUI api code to tree commands.
1180 kes Ensure that tree and dot commands check console ACLs.
1181 kes Permit marking directory with trailing slash.
1182 kes Allow 20 console connections (instead of only 10).
1184 kes Add smartctl call to bacula-sd.conf as an example of getting
1187 kes Modify jobq.c to let simultaneous restore jobs run. This may
1188 cause them to fail if they cannot get a drive.
1189 kes Add Client Connect Wait to Storage daemon to permit users to
1190 modify the time the SD waits for a FD connection.
1192 kes Correct virtual changer check which was backwards. This caused
1193 volumes to be unloaded into slots already occupied.
1195 kes Apply Command ACL filter to JobId list in restore command.
1196 kes Correct typeo in var.c patch.
1198 kes Don't let Bacula prune File or Job records for the current Job.
1199 kes Fix variable substitution pad + inc bug reported (with patch)
1202 kes Correct SQLite log table index as reported by Luca Berra.
1204 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1206 kes Begin implementing new comm signals for API.
1207 kes Fix a few places in lib/message.c where the open fd may
1209 kes Continue implementing lib/bsock.c (real class). Make jcr,
1210 who, host, and port private. There are new methods to access
1211 them for non-class use. This required touching a number of files.
1213 kes Add LANG=C to autoconf/randpass so it works with languages other
1214 than English. Fixes bug #788.
1216 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1218 You will not be able to generate Include/Exclude list any more.
1219 It will be fixed soon.
1220 If you want to use this, you can apply
1221 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1223 kes Restore of sockets created false error messages because Bacula
1224 no longer restores sockets, but the code was still trying to
1225 set the attributes on a non-existent file. Reported by a user.
1226 ebl finish RecyclePool feature
1227 Media will takes Pool.RecyclePool
1228 when moving from Scratch to a Pool or when user will do
1229 update volume=xxx frompool
1230 To use it, add RecyclePool = aPool to your Pool resource
1233 RecyclePool = Scratch
1237 kes Expand new BSOCK class adding signal() and new BNET signals.
1238 kes Begin enhancing the dot commands adding a new API function
1239 that returns more information and will make it easier
1240 to interface to the Director from a program.
1242 kes Make DEVICE fd private. Its new name is m_fd, and can be
1243 obtained with dev->fd() outside the class. This is the
1244 first of many DEVICE members to be made private.
1245 kes Implement Michael Renner's idea on having a virtual disk
1246 changer. I made some minor modifications (e.g. I did not
1247 implement the Virtual Changer directive, but simply set
1248 the Changer Command to an empty string.
1250 kes Implement a BSOCK send() method that writes the whole record
1251 in a single write() request rather than in two.
1252 ebl add update volume=xxx recyclepool=yyyy
1253 volume takes recyclepool from pool when using update volume=xxx from pool
1255 kes Fix encryption deblocking bug, which caused some restored files
1256 to be truncated. This fixes bug #763.
1257 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1258 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1260 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1261 ebl Use btime_t instead of uint64_t in media patch.
1263 kes Optimize the use of the database a bit in the Status dir command.
1264 Only open it when needed, ensure that if any previous database
1265 was opened, it is closed.
1267 kes Correct VolCatBytes bug from media patch.
1268 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1269 in the case of orphaned records.
1270 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1271 and File records in 300K chunks to be more efficient. This
1272 idea came from Juan Luis Frances (if I remember right).
1273 kes Apply Eric's scratch patch that moves a purged Volume to
1274 the RecyclePool. Question: how is RecyclePool set? what
1275 happens to the ScratchPool?
1276 kes Apply Eric's media patch that collects read/write media
1277 times as well as byte counts. This patch requires a
1278 simultaneous upgrade of the DIR and SD. Note, there
1279 should be some way to turn off timing. I'm not sure
1280 times are in Bacula units.
1281 kes Apply Eric's batch-insert patch.
1283 kes Update projects list.
1285 kes Implement Include/Exclude file lists in FD as dlists using
1286 the new dlistString class. This permits efficiently having
1287 large include/exclude lists and completes project Item 25.
1288 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1289 console is authorized to cancel the job. This fixes bug
1291 kes Modify SD so that the VolCatJobs medium record is updated
1292 at the beginning of a Job rather than the end. This
1293 fixes bug #775 where exceeding MaxVolJobs caused jobs
1295 kes Added a mutex around getting and setting Volume information
1296 so that multiple simultaneous jobs will single thread.
1298 Switch to using Subversion
1299 kes Remove src/pygtk-console/ from configure
1301 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1302 plus the entrypoints.
1303 kes Apply patch supplied that corrects debug print
1304 in canceling jobs for max run time. Supplied as
1305 part of bug #621, which was previously fixed.
1307 kes Test on job_canceled() and sd_msg_thread_done inside
1308 loop starting the message thread to avoid a race condition.
1310 kes Remove rl_catch_signal from console.c as it conflicted
1311 with the header definition. Fixes bug #765.
1312 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1314 kes Clarify some stored/acquire messages to indicate if the
1315 problem is with read or append.
1317 kes Fix memory leak with storage ids in cats/sql_get.c
1318 kes Terminate watchdog earlier to avoid reference to released
1319 memory -- reported by Jason Austin.
1320 kes Move closing the database from jobq.c to the director daemon
1321 termination routine. This fixes memory leaks for shadow jobs
1322 (i.e. migration jobs).
1323 kes Free up the unique jobid chain items in migrate.c. This fixes
1324 a memory leak problem.
1325 kes Convert some ugly looking for statements to use foreach_alist
1326 in findlib/find.c. This will facilitate converting the structures
1327 to use dlist (for large include/exclude lists).
1328 kes Fix a bug in the btree.c and btree.h routines, then rename them
1329 rblist and add them to be built in src/lib. Include some new
1330 methods written by Rudolf Cejka that make the code more readable
1331 (hides some of the ugly casting).
1332 kes Add set_next() and set_prev() methods which make the code much more
1333 readable. Also add a new dlistString class that facilitates storing
1334 strings in dlists. To be used in the large include/exclude lists.
1335 kes Make some trivial modifications to lib/tree.h that use rblist
1336 rather than dlist for storing the tree links. This was suggested
1337 by Rudolf Cejka. The result of this is that the restore tree now
1338 uses red-black binary trees rather than simple linked lists. This
1339 should give rather dramatic speed improvements for directories
1340 contining large numbers of directories/files (more than 10000).
1342 kes Fix maxruntime bug #621.
1344 ebl Implement the include JobID in spool file name project.
1345 kes Reorder projects file in order determined by Jan 2007 vote.
1346 kes Implement item #12 on project list -- quick release of FD by
1348 kes Fix open of SQLite3 db where user does not have write permission
1349 so that DIR does not crash. Fixes bug #761.
1351 kes Add back missing @ in Win32 Makefile.
1352 kes Change 'Device not configured to autolabel' from INFO
1354 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1355 which should restart an indefinite # of times.
1356 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1357 other DIR specifications.
1359 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1360 Fix path quoting in SQLite scripts.
1361 Fix problems with SHGetFolderPath.
1363 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1365 kes Fix Job restart on error bug that promotes an Inc to a Full
1366 backup. This should fix bug #755.
1367 kes Add qt-console and first cut of code.
1371 kes Fix Bacula->Documentation link on Win32 to point to index.html
1372 instead of bacula.html. Fixed bug #750.
1373 kes Return JobId in db_get_job_record() when JobId==0. This should
1375 kes Do not release source pointers when restarting a failed job.
1377 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1378 This *should* fix bug #747.
1379 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1382 kes Modify USTORE constructor to set an empty store_source string,
1383 and don't copy the store_source string in a cancel. Hopefully
1384 this will fix Arno's seg fault, bug #744.
1385 kes Add back code to disable conio in configure. Fixes bug #743.
1386 kes Correct the Options scanner in the FD to correctly handle
1387 SHA1 option, which was eating the next option. Reported by
1389 kes Add code to indicate when the SD is spooling, spool wait, and
1390 despooling as requested by Alan Brown.
1392 Version 2.0.0 released: 4 January 2007