1 Technical notes on version 2.3
5 ebl Cleanup batch code.
6 kes Back out one small change to the reservation system (reserving a volume).
7 kes Rework how a Volume is mounted. It is now much more intelligent and
8 will always attempt to use any mounted volume if possible and reduces
9 calls to the Director asking about volumes.
11 kes Turn off some code when batch insert not enabled.
12 kes Edit FD name in connect error messages.
13 kes Rework the reservation system to take into account that the Director
14 might give us a Volume that is different from the current one being
15 used, and to ensure that we don't exceed Maximum Volume Jobs.
16 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
17 fatal error with multiple jobs running'
18 kes Add more debug code in reservation system.
19 kes Implement maxvol-test to check bug #947.
21 kes Add code to handle tray monitor separated from Win32 FD.
22 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
24 kes Add missed return in fixing verify bug -- trunk only.
25 ebl Fix a command parser issue causing a director segfault.
26 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
28 kes Increase the max block size to 4MB fixes bug #957.
29 kes ERABT if user sets min block size > max block size. Fixes bug #956.
30 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
31 is not properly mounted (recognized) during a poll.
32 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
33 Job that has differences reports Verify OK.
34 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
36 ebl Add an option to operate on all pools with update vol parameters.
37 This complete the project 20. Patch from Nigel Stepp.
38 ebl Add history support to bconsole when using readline.
39 Using Ctrl-D to exit doesn't update .bconsole_history
40 kes Modify new volume algorithm to use max MediaId for generating next
41 volume number rather than the count of Volumes. This should essentially
42 eliminate the failure rate if some volumes were deleted. Bug #921.
43 kes Begin implemention of Optimize Job Scheduling.
44 kes Implement restore callback that Dirk and I agreed on for bat
45 restore. This fixes bug #928. Restore of backup of zero files fails.
46 kes Fix SQL Catalog logging which broke with new db_escape_string
49 kes Fix bacula_cats.def for new db_escape_string().
50 kes Increase size of name string when FD making connection to SD.
51 May fix bug #953. FD->SD connection failure.
53 kes Add code to help Dan debug 2drive-incremental-2disk test.
54 kes Add code to try to fix bug #908.
55 kes Add waits to multiple exit detection code to try to force pid
56 file to always be deleted.
57 kes Restore good dev.tar.gz to rescue set appropriate binary property.
59 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
60 trying to switch drives by checking for blocking before unblocking.
62 kes Cancel storage daemon in all cases where FD reports error. This
63 should fix virtually all cases of bug #920.
64 kes Fix db_escape_string() for MySQL which did not compile.
66 kes Fix error message that was clobbered when Dir tells SD it does not
67 have write permission on Volume. This should fix a minor point
68 in bug #942, but not the main problem.
69 kes Add code to cancel job in SD if FD connection fails. This should
71 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
72 dvl Pass jcr and db into db_escape_string() to enable better escaping
74 kes Fix migration code to get correct Volume name with multiple volumes
75 by skipping |. Fixes bug #936.
76 kes Implement patch supplied by Landon to fix bug #944 where using
77 TLS with bconsole uses 99+% of the CPU.
78 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
80 kes Move patches into patches directory.
82 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
85 ebl Using "m" in bconsole will show messages like before,
87 kes Fix bug #935, and probably also bug #903 where files were not
88 restored. MediaId was not properly set in JobMedia record after
91 kes Suppress chown and chmod error messages if the FD is not running
94 kes Apply Martin Simmons' patch that should turn off the new API usage
95 when batch insert is turned off allowing building on older
97 kes Add ./configure search in qwt-qt4 for qwt package
99 kes Bacula is now free of 3rd party GPL copyrighted code!
101 kes Add guid_to_name.c/h which replace idcache.
102 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
104 ebl Detect if new PosgreSQL batch insert API is present.
105 kes Correct incorrect mempool call causing Director crash. Occurs on
106 systems without va_copy().
107 sb Update spec files for 2.2.1 release
109 kes Fix memory pool call in ua_output.c. bug #934.
110 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
111 Add test program to fnmatch.c
113 kes Integrate patch to README.vc8 from
114 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
115 edit it to get it into Unix patch format.
116 kes Implement mkpath.c to replace old FSF makepath.c
118 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
120 Release Version 2.2.1
122 kes Update POTFILES.in
123 kes Cleanup a few underquoted AC_DEFUNs in configure
124 kes Apply patch from Martin Simmons that adds a test for va_copy to
127 kes Fix bug #921 by increasing the number of tries to create a new volume
129 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
130 can be called multiple times. Implement a version for machines
131 without va_copy() that gets a big buffer.
133 kes Integrate more portable zone offset code into bsmtp.c
134 Submitted by Attila Fülöp.
136 kes Fix bad SD->FD return status reported by
137 (James Harper) <james.harper@bendigoit.com.au>
138 ebl Fix a bug in read_close_session which return random status
139 thanks to James Harper
141 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
142 and directory names during restore of single file/directories.
143 kes Add sanity checks to .sql command when string is empty. Hopefully
144 that will resolve Dirks Director crash.
146 kes Apply patch submitted by Martin Simmons that corrects a seg fault
147 in the bsmtp chat subroutine when debug is >= 10.
149 kes Fix Director crash when running bat SQL queries.
150 kes Add David's notes on Item 8: Copy pools.
152 kes Rework projects file to be current and ready for a vote.
153 kes Enhance lex scanner error message.
155 kes Tweak LICENSE file to mention BSD code.
156 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
157 if specified on the ./configure.
158 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
159 This class is intended to allow us to open a second bsock to the
160 Director while in the restore subdialog.
162 kes Fix configure to create bat Makefile before creating dependencies.
163 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
164 kes Add a tooltip to the tray monitor.
165 dvl Set the Director's PID file before dropping privs. This fixes
168 kes Update AUTHORs file
169 kes Increase the default max concurrent jobs to 20 in FD and SD to
170 correspond with the default .conf files.
171 kes Rewrite the Win32 service routines. This eliminates the 3 copies
172 some different, of the same file created by RN when porting the
174 kes Rearrange some of the Win32 directories and the placement of the files
176 kes Set DEVELOPER flag in version.h
178 ========================================================================
179 Release Version 2.2.0
181 kes Apply a second doc patch from Marc.
182 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
183 improves the tips section that discusses how to setup multiple
186 kes Update bat README file.
187 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
188 corrects a typo in the Recycle status check in db_find_next_volume().
189 This will probably fix a number of annoying problems with multiple
191 kes Modify most of dird/msgchan.c to use bsock class calls rather than
192 bnet calls -- no functionality change.
194 kes Modify the Verify output to specify if files are missing on
195 the Volume(s) or disk. Fixes confusion in bug #916.
196 kes When more than one Volume is read in a migration job, the last
197 Volume bytes reported are from the last read volume rather than
198 the last written volume. Fixed. This fixes bug #910.
199 kes Fix display of Recycle flag after update volume=foo recycle=yes.
200 It previously printed New Recyle flag is: no. This fixes bug
203 kes Correct seg fault when switching tape drives during restore.
204 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
205 be used until after 2.2.0 release.
207 kes Remove fnmatch() in SD that permitted wild card specifications.
210 kes Fix %g in filename returned by SQL for browse tree reported by
212 kes Fix configure so that it puts config.out in the cwd rather than
214 kes Attempt to fix the locking problem reported by Eric in bug #906.
215 kes Make berrno class to leave errno unchanged after constructor call.
216 kes Make bnet_server use the heap rather than the stack to allocate
217 its socket fd pointers to avoid a crash at termination. Problem
218 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
220 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
221 and putting it in depkgs-qt along with Qt4.3.
223 kes Rework code in acquire.c that switches drives for reading when
224 the Media Type does not match. This should fix bug #906
226 ebl Fix a director segfault during job setup #907
227 kes Correct seg fault in postgresql when first operation returns no
228 rows. Fixes Dirks File browser problem seg fault with bat.
230 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
231 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
234 kes Implement PopUp YES/NO dialog for bat.
236 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
238 kes Correct RunScript to terminate job in FD on failure.
239 kes Change abort_on_error and AbortJobOnError to fail_on_error
240 and FailJobOnError in RunScripts.
241 kes Minor tweaks of code formating in RunScripts, principally to
242 avoid depassing 80 columns.
244 kes Eliminate one #ifdef Win32 in bsmtp
245 kes Implement grow tool to grow a file for testing very large databases.
246 kes Add big-vol-test to test Bacula seeking with > 5GB.
249 kes Modify find_next_volume() to return all values in Media record.
250 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
254 kes Update Release notes
256 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
257 Warning, in previous beta version, all media get from scratch keep their
260 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
261 This should fix bug #842. Made a note to look at removing the temp
262 files at the end of the install.
263 kes Add ability to mount and unmount a file device providing it is
264 marked as being removable and has the appropriate mount and unmount
265 commands defined in the Device resource. This fixes bug #830.
266 kes When applying a storage override, release all previous storage
267 definitions rather than just prepending the new storage.
268 This should prevent a good deal of confusion.
270 kes Implement ./configure search for qwt libraries.
272 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
273 Win32 FD. This should fix bug #893.
274 kes Remove an unnecessary beep in Win32 init code.
275 kes Update copyright dates in Win32 executable about boxes.
276 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
277 code with a BSD getopt.c and getopt.h.
278 kes Remove sched.h from the Win32 compat directory -- not used.
279 kes Remove the Exit menu item from the Win32 tray monitor. If you really
280 need to shut it down, do it through the services panel or the command
282 kes Remove some inappropriate Bacula FSFE copyrights.
283 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
284 kes Fix regress config non-portable test as pointed out by
285 Florian Heigl <florian.heigl@gmail.com>
286 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
287 as pointed out by Florian Heigl <florian.heigl@gmail.com>
289 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
290 Reported by Frank Sweetser.
294 kes Fix client-only build.
295 kes Integrate client-only fixes for bsys (initgroups) and conio from
296 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
297 kes Make arguments to get_scratch_volume() in same order as other
299 kes Rework the prune_volumes() subroutine so that after purging and
300 no volume found in desired pool, it will check for a scratch
301 volume. This prevents recycling the whole scratch pool.
302 kes Add code to status storage to print boffset_t (largefile support).
304 kes Move qwt (Graphics libarary for Qt4) to depkgs.
305 kes You now need a --with-qwt=<dir> to be able to build bat.
306 kes Update src/win32/cats/bacula_cats.def to include the new
307 db_get_query_dbids() call on Win32.
309 kes Correct a problem when selecting a scratch volume and moving
310 it to another pool that lost some columns.
311 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
312 kes Enhance Autochanger error messages to include Volume and device name.
313 kes Rework prune_volumes() code to take account of InChanger flag,
314 and to handle recycling volumes going to the Scratch pool and
315 current pool because the RecyclePool directive.
316 kes Implement a better and more efficient db_get_query_dbids() to
317 handle creating and passing back a list of DBIds.
321 kes Start work on new more efficient DBId subroutine. First use
322 will be for recycling volume to Scratch inchanger.
323 kes Increase number of JobIds in pruning from 1000 to 10000.
324 This to be replaced by above routine.
325 kes Begin implementation of building Qt4 on Win32.
326 kes Correct typo in fix I added for bad TLS shutdown.
327 kes Pull 2.0.3 patches into patches directory.
328 kes Update Release notes. Include qt-console in line count.
329 kes Update Projects file.
331 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
332 bug in migration code where a job that spanned two volumes
335 kes Implement new BST_DESPOOLING blocked state. Change from locking
336 during despooling in SD to blocking. This means that other threads
337 can work with the device structure, in particular the reservations
338 system while despooling.
340 kes Fix return in reservation message queue that missed clearing
341 the jcr lock (implemented 26Jun07 below).
342 kes Rename a number of dev methods to make locking function names
344 kes Document locking in lock.c. Move lock structures to new file
347 kes Move reservations message lock to lock jcr only this
349 kes Move main SD locking code into lock.c (new file).
350 kes Update Win32 build to include lock.c
354 kes Dirk committed the qwt library code for drawing graphs in bat.
355 kes Tweak install of qwt so that it is integrated with ./configure.
357 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
358 out by Eric (my typo).
359 ebl Fix configure.in to get batch mode enable
360 kes Return correct string from authenticate.cpp in bat when connecting
362 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
363 spurious line drops when using TLS.
364 kes Do not file reparse points when restoring a file that already
367 kes Implement Windows reparse points -- similar to directories, but
368 we do not descend into it. This is a first cut. They seem to
369 be backed up, but restore is not yet tested.
370 kes Remove restore_blocking in tls code when shutting a socket to leave
371 it in blocking mode. Hopefully this will fix the encryption bug
372 reported by Frank Sweetser.
373 kes When opening a file for backup, tell the OS that we are going to
374 read it sequentially -- optimization.
375 kes Change variable names in authenticate_director() to not conflict
376 with member names in bat. Caused great confusion with compiler,
379 kes Queue openssl error messages in case of comm problem.
380 kes Do shutdown() call if socket terminated.
381 kes Remove some duplicated code in tls.c
382 kes Move more of the bsock member variables into private and access
384 kes Add Frank Sweetser's tls-test to the regression suite.
386 kes Add Swedish sv.po file
388 kes Don't print clock skew message in FD if less than 3 seconds diff.
389 kes Add a bit of VSS info to status client.
390 kes Implement a first cut of Vista VSS, using Win2003 code.
394 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
395 loaded tape but uses first drive).
396 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
397 This was indeed a Win32 issue.
399 kes Simplify search of autochanger for in-use Volume.
400 kes Fix exit condition of check for in-use volume. kes Remove
401 inappropriate my_postgresql_free_result() in db_close()
403 kes Fix bad return in FD when encryption signature not found.
404 Probably caused a crash.
405 kes Inhibit missing encryption signature error messages for
406 file types where no signature computed.
407 kes Correct inverted check on autochanger in reservation system.
408 kes Tweak debug code in autochanger reservation.
410 kes Add some additional locking in the cats directory in subroutines
411 that modify packet variables called from batch insert.
412 kes Rework how dcrs are allocated. new_dcr() can now be called
413 with an existing pointer, and it will simply clean it up.
414 This allows the reservation system to test various different
415 devices, and will permit easy device changes.
416 kes A bunch of changes all over to handle new new_dcr() calling
418 kes Work more on the Volume management in the SD. Remember Volumes
419 for tape drives and for autochangers (even virtual disk changers).
420 kes When looking at the Volume list to reserve a drive, handle
421 autochanger names correctly by interating through the changer
422 devices. Also call the Director to see if a Volume is suitable
424 kes Fix some bugs in bscan. Make sure all media records are written.
425 Make sure that valid JobMedia records are written for disk files.
426 Previously they were completely wrong.
427 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
428 that the URLs don't change and so that the developers will all
429 work off the same copy. Rebuild from scrach.
430 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
434 kes Fix seg fault in FD from incorrect digest size.
435 kes Fix argument to non-OpenSSL crypto.c subroutine.
439 kes Remove a few malloc()s from the encryption code.
440 kes Use the class calls to bsock in filed/backup.c and restore.c in
441 place of the old bnet_xxx code.
442 kes Implement code that does an on the fly calculation of the
443 signing digest during restore of encrypted files. It makes
444 a best guess at the algorithm, and if it is not correct, will
445 then revert to the old code which reads the file after it is
447 kes Implement at least one missing crypto stream in stream_to_ascii()
448 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
449 #877 where a reload with bad syntax causes Dir to exit.
451 Cut: 2.1.14 beta (not released)
453 kes Do not free a volume on a tape drive until another volume is
454 mounted and read, or the autochanger unloads the volume.
455 This should help the SD re-use volumes that are already mounted,
456 and should fix bug #886.
457 kes Apply patch from user brettedgar that allows gnome2-console include
458 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
459 kes Apply patch from Lucien Weller that fixes day of week calculation
460 because of DST flag problem. Fixes bug #887.
462 kes Move find_next_appendable_volume() to after acquiring a valid device
463 in reserve.c. This fixes bug #864 -- confirmed by reporter.
465 kes Unable to reproduce bug 872. However added additional testing for
467 kes Bug #874 resolved by documenting SQLite limitations.
468 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
469 kes Bug #881 resolved by removing typo in mtx-changer script.
470 kes Made Frank Sweetser's wiki the official Bacula wiki with his
471 approval. Added a link to the wiki on the web page, and implemented
472 a backup from http://paramount.ind.wpi.edu
474 kes Fix update allfrompool to pass pool name.
476 kes Convert to pure GPL v2 license.
477 kes Fix sscanf problems reported by Peter Buschman that caused
478 a bus error on Solaris.
479 kes Rework (simplify) the select prompt in bat.
480 kes Move get_jobid_from_tid() into lib and create a
482 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
483 should definitely fix the problem of lost error messages in the
485 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
486 kes Eliminate tcpd.h from the project. Enclose the #include from the
487 library with extern C ...
488 kes Add print of signal name when a signal is trapped.
492 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
494 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
495 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
496 makes SQLit3 run 30 times faster, though a bit less safe.
497 kes Implement --with-batch-insert in configure and detection of thread
498 safe libraries. It is on by default, but turned off if no thread
499 safe library (e.g. SQLite 2) is available.
501 kes Fix Bacula PostgreSQL buffer overruns.
502 kes Do better checking for NULL results returned from PostgreSQL;
503 implement retry for failed queries; clear results buffer after
504 failed query. Hopefully this will correct the PostgreSQL failures.
506 kes Implement algorithm to handle only one appendable volume with
507 Prefer Mounted Volumes = no.
508 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
509 returned from a query.
510 kes Make volume lock recursive.
511 kes Implement an additional volume reservation algorithm that
512 starts by considering all reserved volumes then uses the
513 old brute force algorithm of searching the resources to
514 find a suitable device.
515 kes Add new reservations debug code and refine the old code.
516 kes Update the win32/dll/bacula.defs file.
518 kes Tweak reservations algorithm to permit a few more cases, i.e.
519 volume reserved, but on different drive, ...
520 kes Enhance SD status to include Pool and Media Type for drive in a
521 more readable format (a bit longer).
522 kes Fix PostgreSQL double free.
524 kes Minor refactoring of restore decryption code.
525 kes Add code to smartall.c to detect double free of a buffer.
527 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
528 so that bsmtp will create a correct email address (mailbox only).
529 kes Modify 'memory' command so that the buffers are listed as 'In use'
530 to avoid confusion with Orphaned buffers.
531 kes I reworked the OpenSSL include/lib flags to be handled in
532 the standard Bacula way, which should fix bug #863 concerning
533 non-standard OpenSSL libraries.
535 kes Implement Help Browser window for bat.
536 kes Fix reload bug that reset StorageId to zero.
538 kes Fix TLS #ifdefing when TLS turned off.
539 kes Ensure that when labelling a tape with Slot=0 that InChanger
541 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
543 kes Add StartTime to final uar_sel_jobid_temp query so that we can
544 add DISTINCT (required by PostgreSQL).
545 kes Implement BSOCK authenticate_director() method. Eventually will
546 authenicate all daemons.
547 kes Move several more functions into the BSOCK class.
549 kes Add code to tell the OS that we no longer need a cached
550 file that we were reading. In findlib/bfile.c. Also,
551 only cache files that we are reading. Thanks to
552 Tobias Oetiker <tobi@oetiker.ch> for the idea.
553 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
554 kes Implement script to automatically generate cats and dll .def
556 kes Update README.mingw32 to include new .def file generation.
557 kes Correct typo in UTF-8 error message as reported by:
558 jhernandez <julianhernandez@gmail.com>
559 kes Add additional sm_check() code on debug level 1.
560 kes Set default debug level to 1.
561 kes Trap SIGABRT in attempt to get traceback.
563 kes Reduce bat connect timeout from 30 to 15 seconds.
564 kes More restructuring and implementing BSOCK class in place of
566 kes Remove a few unnecessary malloc() tests in crypto code.
567 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
568 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
569 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
571 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
573 kes Fix Verify InitCatalog. The attributes were not pointing to the
574 correct saved location.
575 kes Implement message callback so that GUI is sure to get all
576 daemon messages. Currently displayed in a dialog in bat.
577 kes Ignore SIGUSR2 (Bacula timer) in bat.
578 kes Apply regress patch from bug #859 to allow regress to work
579 with Solaris compiler.
581 kes Begin adding TLS support to bat.
582 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
583 clean up lex.c and make it more readable.
585 kes Move more bnet functions into the BSOCK class.
586 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
587 kes Complete change of berrno strerror() method to bstrerror()
591 kes Cleanup incorrect email addresses in bsmtp.
592 kes Make bat display initial messages rather than discard them.
594 kes First cut of adding .mod to the run command.
595 kes Implement auto display of messages in bat.
596 kes Enhanced preferences to allow all Bacula output to be
599 kes Try to make bsmtp date routines more generic.
600 kes Fixed bug #856 autochanger documentation.
601 kes Rework bsmtp date editing for Win32. This fixes bug #854.
602 kes Add new cats entry point so Win32 builds.
604 kes Attempt to fix bsmtp date editing on OSes without %z editing.
606 kes Do better checking for the MySQL 64 bit libraries looking for both
607 .a and .so libraries.
608 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
609 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
610 kes Require the thread safe version of MySQL during configure. Thanks
611 to Andre Noll for pointing this out.
612 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
613 continuing in migration code.
614 kes Apply implementation of tray-monitor font derived from gnome-console
615 submitted by Andreas Piesk <a.piesk@gmx.net>
617 kes Eliminate important memory loss in SQLite
618 kes Fixed the batch insert MySQL thread specific data that was not
619 being freed. See cats/mysql.c:db_thread_cleanup().
620 kes Fix restore before command.
621 kes Convert old hdr.name to name() in a few places.
622 kes Implement update jobid command.
623 kes Return all time_t dates in db_get_job_record()
624 kes Stop watchdog in SD earlier.
625 kes Put Pool just after Storage in please mount message.
626 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
629 kes Update the po files.
630 kes Fix Verify InitCatalog by making it cache attributes.
632 kes Change name bacula-bat to bat for man 1 page to correspond to
634 kes Check for client and store NULL pointers in status command. This
636 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
637 kes Fix sign extended editing of %p.
638 kes Clean out a little old #ifdefing in cats/mysql.c
640 kes If time diff between DIR and FD is more than 600 seconds convert
641 INFO message to WARNING.
642 kes Implement heap size display in status for all daemons.
643 kes Attempt to fix MySQL db open memory loss (not successfull).
644 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
645 kes Eliminate memory loss in MySQL (possibly other SQLs) during
646 Query. This looks like a MySQL but but by doing extra releases,
647 the memory goes away. This should fix bug #847.
649 kes When backup fails, cancel SD before waiting for sd termination.
650 kes If SD is waiting for FD to connect during cancel, wake up the
652 kes Fix fsf code so that errno is correctly reported.
653 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
655 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
656 so that Bacula doesn't later stumble into a seg fault.
657 kes Use the term Restore Client in the restore Job report.
658 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
659 the original job's FileSetId.
660 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
661 spooling in migration jobs. Not yet tested.
662 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
663 reading conf file from a pipe. However, do it with open_bpipe()
664 rather than popen. Not yet tested.
666 kes Fix an ugly bug where the VolCatBytes were getting updated
668 kes Implement bconsole memory command that prints current memory
669 usage, plus smartalloc dump.
670 kes Clarify some error messages in backup, admin, and migrate.
671 kes Shrink label dialog to smaller size.
672 kes Invert Cancel OK buttons on restore to be OK Cancel.
673 kes More strerror() to bstrerror() conversions.
675 kes Start implementing bstrerror() in place of strerror().
676 kes Stripping path -- seems to work.
678 kes Prevent door and port files from being restored (mostly
680 kes Free an unreleased buffer in compat code.
681 kes Change console Job name from *Console* to -Console- to eliminate
682 Win32 filename problems. Put Win32 path separator when creating
683 Console file. This fixes bug #846.
684 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
686 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
688 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
689 to force Win32 error message.
691 kes First cut strip path. The data should be passed to the FD,
692 but nothing is done with it yet.
693 kes Enhance the digest and signature routines in the crypto
694 library to accept a JCR and to use it to print error messages
695 so that they will go in the Job report rather than the daemon's
697 kes Simplify some of the verify signature code.
698 kes Simplify a few of the alternative returns in the signature
701 ebl Use only POSIX regex instead of GNU regex in breg.c for
702 File relocation. It fix broken freebsd compilation.
703 kes Convert all other Dir files to use new ua class message
705 kes Tentative fix for missing digest signature in bug 807.
706 kes Correct handle problem in new win32_ftruncate routine.
707 kes Convert ua_purge.c and ua_update.c to use new ua class
708 message routines for bat.
710 kes Correct incorrect installation of LICENSE in Win32 installer.
711 kes Display LICENSE at the beginning of the Win32 install.
712 kes Attempt to correct the need for the png files to be installed
714 kes Reapply my bat.conf install script in qt-console. I think I
715 editted bat.pro instead of bat.pro.in and it was lost.
716 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
717 the /var/lock/subsys for subsysdir. Also corrects typos in the
720 kes First cut update job.
721 kes Correct configure to include qmake of src/qt-console directory.
723 kes Make restore job yes/mod/no print in one command so GUI works.
724 kes First cut implementing backup and restore client.
725 kes Correct editing in Verify output that caused a seg fault.
727 kes Insure that bat.conf is not overwritten during installation.
728 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
729 while I was implementing migration in March 2006 !
731 ebl Cleanup file relocation, using char *RegexWhere instead of
732 char *where + bool where_use_regexp
733 kes Update some manpages and add bat manpage.
734 kes Make a first cut at converting bacula.spec.in for bwx-console
736 kes Apply patch from John Goerzen to add hostname as fourth argument
737 to make_catalog_backup script.
738 kes Fix typos I introduced into bsmtp.c
739 kes Make pm_strxxx() routines handle input of NULL pointer. This
740 is to protect from NULL pointers returned from SQL databases.
741 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
742 kes Add more debug to FIFO code -- fix fifo regression test.
744 kes Implement posix_fadvise in FD, and for reading spool files in SD.
745 kes Add thread timer to bnet_connect() to break from OS if wait time
748 kes Update Win32 build to include new files, new symbols, and
750 kes Implement socket level heartbeat (tcp_keepidle)
751 ebl Commit File relocation patch
752 kes Make bat have 'make install' target.
753 kes Warn during install if old gnome-console binary found.
754 kes Warn during install if old wx-console binary found.
755 kes Add -8 option to bsmtp command line to add content type utf-8.
756 Fixes bug #809. (Character coding problem in bsmtp).
757 kes If < is found in target (from, to, cc) then do not enclose the
758 target in < > in bsmtp. Fixes bug #772 (malformed address).
759 kes When printing certain items in dbcheck, stop after 300000.
760 Fixes bug #822. (dbcheck loops).
761 kes Incorrect status in Dir after waiting for mount with poll set.
764 kes Extend idea of Prefer Mounted Volumes to mean a volume about
766 kes Print waiting to reserve a device every 5 mins.
768 kes Don't call close_part in label.c if tape and relabel.
769 kes Don't free volume if busy in close() -- should help with
771 ebl Fix #824 RunScript bug (After script could be execute twice)
772 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
773 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
774 Add a regression script to test RunScript
776 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
779 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
780 deprecated. No additional bugs will be fixed, and they will be dropped
781 in a future release (probably 2.4.0).
782 kes Change name of wx-console to bwx-console to make it more Bacula
784 kes Change the name of gnome-console to bgnome-console to make it
787 kes Some time in March, a Feature Request with patch from Jorj Bauer
788 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
790 The ability for the director to validate a Client (FD) CN against
791 an arbitrary set of patterns rather than the hostname, with
792 A new 'TLS Allowed CN' set of directives which are implemented
793 in the Client resource. Then pattern matching is used in place
794 of hostname matching against the Certificate's CN. As an example, we
795 have certificates which (a) use a local CA, and (b) have a CN of the
797 kes Add new/changed entry points to Win32 build
798 kes Create unaccepted-projects for projects that are not accepted.
799 kes Simplify locking in the reservations system.
800 kes Add more debug code in reservations.
801 kes Make sure error condition on reserving a volume is handled correctly.
802 kes Correct handling of volume_in_use.
803 kes Correct handling of initializing a device.
804 kes Move handling of broadcasting releasing a device into release_device().
805 kes Correct attaching dcr to dev so that it is only done if device
806 is properly initiated.
808 kes Locking debug level tweaks in SD.
809 kes Tweak new Volume code.
811 kes Add exec external-command [wait-seconds] to bconsole. This
812 executes the external-command. Note! normally external-command
813 should be enclosed in double quotes.
814 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
815 it should normally be off in a production system.
817 kes Implement die command for SD so that we can force it to dump.
818 kes Implement SD lock debug code.
819 kes Implement new algorithm for keeping Volume list in SD. It
820 is now owned by the device.
822 kes Implement new code for freeing in use volumes that should
823 resolve if not all, some of the problems of multiple drive
824 tape conflicts described in bug 801.
826 kes Fix gui/bacula-web/images files in svn.
827 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
829 ebl Fix a bug in batch mode (in string escape)
830 kes Correct migration prune SQL typo that crept in in a
833 kes Move bnet_despool() into class in bsock.c
834 kes Modify job report to include director name and Build OS.
835 kes Move drop root privilege and check_catalog() before fork.
836 kes Add update database scripts (version 9 to 10) to updatedb directory.
838 ebl Check size and age of each file after its backup to see if
839 it has changed during backup, if 'checkfilechanges' is set.
840 The FD will do an extra check (stat(2)) after
841 each file backup. mtime, ctime and size are compared with
842 'before backup' information. If time or size mismatch, an
843 error message will be generated. You must upgrade FD to use it.
845 kes Make database name and user configurable
846 --with-db-name=xxx --with-db-user=xxx
847 kes Add back database type to message.c for debugging.
849 kes Implement dir_sql() which issues an SQL query.
850 kes Modify bat medialist to use dir_sql() and do some minor C++
851 formatting as well as eliminating a number of pointers, simplifing
854 kes Fix some of the mtx-changer grep commands for tape label readers.
855 kes Convert a number of bsendmsg into the appropriate send/warning/error
857 kes Suppress the using database message in the .sql command.
858 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
860 kes Add context menu for floating a window.
861 kes Some minor cleanup and name changes in qt-console
862 kes Add doing mt setblk 0 in Win32 mtx-changer.
863 kes Apply Martin's bug fix to move definition of ENODATA for
865 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
868 kes More pruning cleanup.
869 kes Turn on wait_for_drive by default in mtx-changer.
870 kes Turn on Batch insert code by default as it now passes regression.
871 kes Add ./configure --enable-bat to enable building of Bat.
872 No install yet though.
874 kes Implement a new .sql command for bat.
875 kes Implement code to turn off pruning in obtaining the next volume.
876 Pruning is turned off for the status dir command, but turned on
877 for SD requests and for the list nextvolume command.
879 kes Correct Qmsg() that was not updated correctly when committing a
880 previous change (probably the recent TLS patch).
882 kes Write new subroutine is_volume_purged() that explicitly checks
883 if the Volume is purged, and if so marks it as such. This should
884 resolve problems reported about needing to mount twice to recycle
886 kes Rewrite pruning algorithm to do more work in the SQL engine, and
887 to pass a list of JobIds to be deleted to SQL. Also, minimize the
888 amount of duplicated code.
889 kes Do volume pruning only for the Media Type desired (reduces pruning time
890 if multiple Media Types are in the same pool).
891 kes Implement more detailed info in the Job report for the Bacula version
893 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
895 ebl Add bbatch tool to bench database and insert mode.
896 Fix sql quote stuff in batch mode
897 Fix sql stuff for mysql
899 kes Correct problems with am/pm scheduling. Fixes bug #808.
900 kes Implement new prunning code that prunes up to 1000 jobs at
901 the same time. The same technique can be applied to a number
902 of other prune/purge subroutines.
903 kes Add an insanity check when starting a new tape job to ensure
904 that the tape position has not been changed. If so fail the
906 kes Fix Win32 build for dlls to add the folllowing:
907 src/lib/bsock.c -- new file with new entry points
908 src/lib/dlist.c -- new entry points
909 src/cats/sql_create.c -- new entry point
910 src/cats/sql_cmds.c -- new DATA item exported
912 ebl batch mode cleanup bscan-test is ok now.
913 kes Implement SD code to check length of disk volume before appending.
915 kes Correct return status on db_batch... routines.
916 kes Add call to db_write_batch_file_records() to migration code.
917 ebl Fix AfterJob timing
918 kes Move the checking of the database in initializion of the Director
919 to after we drop privileges. This avoids the need for both root
920 and bacula access to the DB.
921 kes Correct a misplaced variable definition in src/filed/backup.c
922 kes Correct how the new batch insert db_create_attributes_record()
923 uses the arguments. Caused a seg fault in bscan.
924 kes Implement lock() and unlock() methods in DEVICE class.
925 Implement block() and set_block(xx) methods in DEVICE class.
926 kes Modify bnet_connect() so that it uses time() to check for the
927 wait time expiring (on some OSes, some system calls may not
929 kes Modify Verify to obtain the previous JobId when it is actually
930 running rather than at schedule time (as it was in 1.38.x).
931 kes Fix src/job.c to handle MaxWaitTime correctly. This should
933 kes When checking pid in pid file, continue running if the pid is
934 the same as ours. This occurs on IRIX after a system crash.
937 kes Extend new GUI API.
938 kes Make the ua structure a class, and implement send_msg(),
939 error_msg(), warning_msg(), and info_msg().
941 kes Apply fix from for building wx-console on the Mac from
943 kes Implement new select mechanism for GUI programs.
944 kes Reorganize initialization of stackedWidgets in bat.
946 kes Add updated nagios plugin supplied by Christian Masopust.
948 kes More bat implementation.
949 kes File migrate bug with Pool Occupancy using mediaid instead
950 of jobids. Fixes bug #795.
951 kes Fix orphaned buffers in filed backup and verify due to
952 crypto buffers not freed during errors. Fixes bug #789.
953 kes Extend new GUI api code to tree commands.
954 kes Ensure that tree and dot commands check console ACLs.
955 kes Permit marking directory with trailing slash.
956 kes Allow 20 console connections (instead of only 10).
958 kes Add smartctl call to bacula-sd.conf as an example of getting
961 kes Modify jobq.c to let simultaneous restore jobs run. This may
962 cause them to fail if they cannot get a drive.
963 kes Add Client Connect Wait to Storage daemon to permit users to
964 modify the time the SD waits for a FD connection.
966 kes Correct virtual changer check which was backwards. This caused
967 volumes to be unloaded into slots already occupied.
969 kes Apply Command ACL filter to JobId list in restore command.
970 kes Correct typeo in var.c patch.
972 kes Don't let Bacula prune File or Job records for the current Job.
973 kes Fix variable substitution pad + inc bug reported (with patch)
976 kes Correct SQLite log table index as reported by Luca Berra.
978 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
980 kes Begin implementing new comm signals for API.
981 kes Fix a few places in lib/message.c where the open fd may
983 kes Continue implementing lib/bsock.c (real class). Make jcr,
984 who, host, and port private. There are new methods to access
985 them for non-class use. This required touching a number of files.
987 kes Add LANG=C to autoconf/randpass so it works with languages other
988 than English. Fixes bug #788.
990 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
992 You will not be able to generate Include/Exclude list any more.
993 It will be fixed soon.
994 If you want to use this, you can apply
995 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
997 kes Restore of sockets created false error messages because Bacula
998 no longer restores sockets, but the code was still trying to
999 set the attributes on a non-existent file. Reported by a user.
1000 ebl finish RecyclePool feature
1001 Media will takes Pool.RecyclePool
1002 when moving from Scratch to a Pool or when user will do
1003 update volume=xxx frompool
1004 To use it, add RecyclePool = aPool to your Pool resource
1007 RecyclePool = Scratch
1011 kes Expand new BSOCK class adding signal() and new BNET signals.
1012 kes Begin enhancing the dot commands adding a new API function
1013 that returns more information and will make it easier
1014 to interface to the Director from a program.
1016 kes Make DEVICE fd private. Its new name is m_fd, and can be
1017 obtained with dev->fd() outside the class. This is the
1018 first of many DEVICE members to be made private.
1019 kes Implement Michael Renner's idea on having a virtual disk
1020 changer. I made some minor modifications (e.g. I did not
1021 implement the Virtual Changer directive, but simply set
1022 the Changer Command to an empty string.
1024 kes Implement a BSOCK send() method that writes the whole record
1025 in a single write() request rather than in two.
1026 ebl add update volume=xxx recyclepool=yyyy
1027 volume takes recyclepool from pool when using update volume=xxx from pool
1029 kes Fix encryption deblocking bug, which caused some restored files
1030 to be truncated. This fixes bug #763.
1031 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1032 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1034 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1035 ebl Use btime_t instead of uint64_t in media patch.
1037 kes Optimize the use of the database a bit in the Status dir command.
1038 Only open it when needed, ensure that if any previous database
1039 was opened, it is closed.
1041 kes Correct VolCatBytes bug from media patch.
1042 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1043 in the case of orphaned records.
1044 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1045 and File records in 300K chunks to be more efficient. This
1046 idea came from Juan Luis Frances (if I remember right).
1047 kes Apply Eric's scratch patch that moves a purged Volume to
1048 the RecyclePool. Question: how is RecyclePool set? what
1049 happens to the ScratchPool?
1050 kes Apply Eric's media patch that collects read/write media
1051 times as well as byte counts. This patch requires a
1052 simultaneous upgrade of the DIR and SD. Note, there
1053 should be some way to turn off timing. I'm not sure
1054 times are in Bacula units.
1055 kes Apply Eric's batch-insert patch.
1057 kes Update projects list.
1059 kes Implement Include/Exclude file lists in FD as dlists using
1060 the new dlistString class. This permits efficiently having
1061 large include/exclude lists and completes project Item 25.
1062 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1063 console is authorized to cancel the job. This fixes bug
1065 kes Modify SD so that the VolCatJobs medium record is updated
1066 at the beginning of a Job rather than the end. This
1067 fixes bug #775 where exceeding MaxVolJobs caused jobs
1069 kes Added a mutex around getting and setting Volume information
1070 so that multiple simultaneous jobs will single thread.
1072 Switch to using Subversion
1073 kes Remove src/pygtk-console/ from configure
1075 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1076 plus the entrypoints.
1077 kes Apply patch supplied that corrects debug print
1078 in canceling jobs for max run time. Supplied as
1079 part of bug #621, which was previously fixed.
1081 kes Test on job_canceled() and sd_msg_thread_done inside
1082 loop starting the message thread to avoid a race condition.
1084 kes Remove rl_catch_signal from console.c as it conflicted
1085 with the header definition. Fixes bug #765.
1086 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1088 kes Clarify some stored/acquire messages to indicate if the
1089 problem is with read or append.
1091 kes Fix memory leak with storage ids in cats/sql_get.c
1092 kes Terminate watchdog earlier to avoid reference to released
1093 memory -- reported by Jason Austin.
1094 kes Move closing the database from jobq.c to the director daemon
1095 termination routine. This fixes memory leaks for shadow jobs
1096 (i.e. migration jobs).
1097 kes Free up the unique jobid chain items in migrate.c. This fixes
1098 a memory leak problem.
1099 kes Convert some ugly looking for statements to use foreach_alist
1100 in findlib/find.c. This will facilitate converting the structures
1101 to use dlist (for large include/exclude lists).
1102 kes Fix a bug in the btree.c and btree.h routines, then rename them
1103 rblist and add them to be built in src/lib. Include some new
1104 methods written by Rudolf Cejka that make the code more readable
1105 (hides some of the ugly casting).
1106 kes Add set_next() and set_prev() methods which make the code much more
1107 readable. Also add a new dlistString class that facilitates storing
1108 strings in dlists. To be used in the large include/exclude lists.
1109 kes Make some trivial modifications to lib/tree.h that use rblist
1110 rather than dlist for storing the tree links. This was suggested
1111 by Rudolf Cejka. The result of this is that the restore tree now
1112 uses red-black binary trees rather than simple linked lists. This
1113 should give rather dramatic speed improvements for directories
1114 contining large numbers of directories/files (more than 10000).
1116 kes Fix maxruntime bug #621.
1118 ebl Implement the include JobID in spool file name project.
1119 kes Reorder projects file in order determined by Jan 2007 vote.
1120 kes Implement item #12 on project list -- quick release of FD by
1122 kes Fix open of SQLite3 db where user does not have write permission
1123 so that DIR does not crash. Fixes bug #761.
1125 kes Add back missing @ in Win32 Makefile.
1126 kes Change 'Device not configured to autolabel' from INFO
1128 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1129 which should restart an indefinite # of times.
1130 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1131 other DIR specifications.
1133 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1134 Fix path quoting in SQLite scripts.
1135 Fix problems with SHGetFolderPath.
1137 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1139 kes Fix Job restart on error bug that promotes an Inc to a Full
1140 backup. This should fix bug #755.
1141 kes Add qt-console and first cut of code.
1145 kes Fix Bacula->Documentation link on Win32 to point to index.html
1146 instead of bacula.html. Fixed bug #750.
1147 kes Return JobId in db_get_job_record() when JobId==0. This should
1149 kes Do not release source pointers when restarting a failed job.
1151 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1152 This *should* fix bug #747.
1153 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1156 kes Modify USTORE constructor to set an empty store_source string,
1157 and don't copy the store_source string in a cancel. Hopefully
1158 this will fix Arno's seg fault, bug #744.
1159 kes Add back code to disable conio in configure. Fixes bug #743.
1160 kes Correct the Options scanner in the FD to correctly handle
1161 SHA1 option, which was eating the next option. Reported by
1163 kes Add code to indicate when the SD is spooling, spool wait, and
1164 despooling as requested by Alan Brown.
1166 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob