1 Technical notes on version 2.3
5 ebl Fix a command parser issue causing a director segfault.
6 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
8 kes Increase the max block size to 4MB fixes bug #957.
9 kes ERABT if user sets min block size > max block size. Fixes bug #956.
10 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
11 is not properly mounted (recognized) during a poll.
12 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
13 Job that has differences reports Verify OK.
14 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
16 ebl Add an option to operate on all pools with update vol parameters.
17 This complete the project 20. Patch from Nigel Stepp.
18 ebl Add history support to bconsole when using readline.
19 Using Ctrl-D to exit doesn't update .bconsole_history
20 kes Modify new volume algorithm to use max MediaId for generating next
21 volume number rather than the count of Volumes. This should essentially
22 eliminate the failure rate if some volumes were deleted. Bug #921.
23 kes Begin implemention of Optimize Job Scheduling.
24 kes Implement restore callback that Dirk and I agreed on for bat
25 restore. This fixes bug #928. Restore of backup of zero files fails.
26 kes Fix SQL Catalog logging which broke with new db_escape_string
29 kes Fix bacula_cats.def for new db_escape_string().
30 kes Increase size of name string when FD making connection to SD.
31 May fix bug #953. FD->SD connection failure.
33 kes Add code to help Dan debug 2drive-incremental-2disk test.
34 kes Add code to try to fix bug #908.
35 kes Add waits to multiple exit detection code to try to force pid
36 file to always be deleted.
37 kes Restore good dev.tar.gz to rescue set appropriate binary property.
39 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
40 trying to switch drives by checking for blocking before unblocking.
42 kes Cancel storage daemon in all cases where FD reports error. This
43 should fix virtually all cases of bug #920.
44 kes Fix db_escape_string() for MySQL which did not compile.
46 kes Fix error message that was clobbered when Dir tells SD it does not
47 have write permission on Volume. This should fix a minor point
48 in bug #942, but not the main problem.
49 kes Add code to cancel job in SD if FD connection fails. This should
51 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
52 dvl Pass jcr and db into db_escape_string() to enable better escaping
54 kes Fix migration code to get correct Volume name with multiple volumes
55 by skipping |. Fixes bug #936.
56 kes Implement patch supplied by Landon to fix bug #944 where using
57 TLS with bconsole uses 99+% of the CPU.
58 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
60 kes Move patches into patches directory.
62 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
65 ebl Using "m" in bconsole will show messages like before,
67 kes Fix bug #935, and probably also bug #903 where files were not
68 restored. MediaId was not properly set in JobMedia record after
71 kes Suppress chown and chmod error messages if the FD is not running
74 kes Apply Martin Simmons' patch that should turn off the new API usage
75 when batch insert is turned off allowing building on older
77 kes Add ./configure search in qwt-qt4 for qwt package
79 kes Bacula is now free of 3rd party GPL copyrighted code!
81 kes Add guid_to_name.c/h which replace idcache.
82 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
84 ebl Detect if new PosgreSQL batch insert API is present.
85 kes Correct incorrect mempool call causing Director crash. Occurs on
86 systems without va_copy().
87 sb Update spec files for 2.2.1 release
89 kes Fix memory pool call in ua_output.c. bug #934.
90 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
91 Add test program to fnmatch.c
93 kes Integrate patch to README.vc8 from
94 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
95 edit it to get it into Unix patch format.
96 kes Implement mkpath.c to replace old FSF makepath.c
98 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
100 Release Version 2.2.1
102 kes Update POTFILES.in
103 kes Cleanup a few underquoted AC_DEFUNs in configure
104 kes Apply patch from Martin Simmons that adds a test for va_copy to
107 kes Fix bug #921 by increasing the number of tries to create a new volume
109 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
110 can be called multiple times. Implement a version for machines
111 without va_copy() that gets a big buffer.
113 kes Integrate more portable zone offset code into bsmtp.c
114 Submitted by Attila Fülöp.
116 kes Fix bad SD->FD return status reported by
117 (James Harper) <james.harper@bendigoit.com.au>
118 ebl Fix a bug in read_close_session which return random status
119 thanks to James Harper
121 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
122 and directory names during restore of single file/directories.
123 kes Add sanity checks to .sql command when string is empty. Hopefully
124 that will resolve Dirks Director crash.
126 kes Apply patch submitted by Martin Simmons that corrects a seg fault
127 in the bsmtp chat subroutine when debug is >= 10.
129 kes Fix Director crash when running bat SQL queries.
130 kes Add David's notes on Item 8: Copy pools.
132 kes Rework projects file to be current and ready for a vote.
133 kes Enhance lex scanner error message.
135 kes Tweak LICENSE file to mention BSD code.
136 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
137 if specified on the ./configure.
138 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
139 This class is intended to allow us to open a second bsock to the
140 Director while in the restore subdialog.
142 kes Fix configure to create bat Makefile before creating dependencies.
143 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
144 kes Add a tooltip to the tray monitor.
145 dvl Set the Director's PID file before dropping privs. This fixes
148 kes Update AUTHORs file
149 kes Increase the default max concurrent jobs to 20 in FD and SD to
150 correspond with the default .conf files.
151 kes Rewrite the Win32 service routines. This eliminates the 3 copies
152 some different, of the same file created by RN when porting the
154 kes Rearrange some of the Win32 directories and the placement of the files
156 kes Set DEVELOPER flag in version.h
158 ========================================================================
159 Release Version 2.2.0
161 kes Apply a second doc patch from Marc.
162 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
163 improves the tips section that discusses how to setup multiple
166 kes Update bat README file.
167 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
168 corrects a typo in the Recycle status check in db_find_next_volume().
169 This will probably fix a number of annoying problems with multiple
171 kes Modify most of dird/msgchan.c to use bsock class calls rather than
172 bnet calls -- no functionality change.
174 kes Modify the Verify output to specify if files are missing on
175 the Volume(s) or disk. Fixes confusion in bug #916.
176 kes When more than one Volume is read in a migration job, the last
177 Volume bytes reported are from the last read volume rather than
178 the last written volume. Fixed. This fixes bug #910.
179 kes Fix display of Recycle flag after update volume=foo recycle=yes.
180 It previously printed New Recyle flag is: no. This fixes bug
183 kes Correct seg fault when switching tape drives during restore.
184 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
185 be used until after 2.2.0 release.
187 kes Remove fnmatch() in SD that permitted wild card specifications.
190 kes Fix %g in filename returned by SQL for browse tree reported by
192 kes Fix configure so that it puts config.out in the cwd rather than
194 kes Attempt to fix the locking problem reported by Eric in bug #906.
195 kes Make berrno class to leave errno unchanged after constructor call.
196 kes Make bnet_server use the heap rather than the stack to allocate
197 its socket fd pointers to avoid a crash at termination. Problem
198 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
200 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
201 and putting it in depkgs-qt along with Qt4.3.
203 kes Rework code in acquire.c that switches drives for reading when
204 the Media Type does not match. This should fix bug #906
206 ebl Fix a director segfault during job setup #907
207 kes Correct seg fault in postgresql when first operation returns no
208 rows. Fixes Dirks File browser problem seg fault with bat.
210 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
211 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
214 kes Implement PopUp YES/NO dialog for bat.
216 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
218 kes Correct RunScript to terminate job in FD on failure.
219 kes Change abort_on_error and AbortJobOnError to fail_on_error
220 and FailJobOnError in RunScripts.
221 kes Minor tweaks of code formating in RunScripts, principally to
222 avoid depassing 80 columns.
224 kes Eliminate one #ifdef Win32 in bsmtp
225 kes Implement grow tool to grow a file for testing very large databases.
226 kes Add big-vol-test to test Bacula seeking with > 5GB.
229 kes Modify find_next_volume() to return all values in Media record.
230 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
234 kes Update Release notes
236 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
237 Warning, in previous beta version, all media get from scratch keep their
240 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
241 This should fix bug #842. Made a note to look at removing the temp
242 files at the end of the install.
243 kes Add ability to mount and unmount a file device providing it is
244 marked as being removable and has the appropriate mount and unmount
245 commands defined in the Device resource. This fixes bug #830.
246 kes When applying a storage override, release all previous storage
247 definitions rather than just prepending the new storage.
248 This should prevent a good deal of confusion.
250 kes Implement ./configure search for qwt libraries.
252 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
253 Win32 FD. This should fix bug #893.
254 kes Remove an unnecessary beep in Win32 init code.
255 kes Update copyright dates in Win32 executable about boxes.
256 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
257 code with a BSD getopt.c and getopt.h.
258 kes Remove sched.h from the Win32 compat directory -- not used.
259 kes Remove the Exit menu item from the Win32 tray monitor. If you really
260 need to shut it down, do it through the services panel or the command
262 kes Remove some inappropriate Bacula FSFE copyrights.
263 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
264 kes Fix regress config non-portable test as pointed out by
265 Florian Heigl <florian.heigl@gmail.com>
266 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
267 as pointed out by Florian Heigl <florian.heigl@gmail.com>
269 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
270 Reported by Frank Sweetser.
274 kes Fix client-only build.
275 kes Integrate client-only fixes for bsys (initgroups) and conio from
276 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
277 kes Make arguments to get_scratch_volume() in same order as other
279 kes Rework the prune_volumes() subroutine so that after purging and
280 no volume found in desired pool, it will check for a scratch
281 volume. This prevents recycling the whole scratch pool.
282 kes Add code to status storage to print boffset_t (largefile support).
284 kes Move qwt (Graphics libarary for Qt4) to depkgs.
285 kes You now need a --with-qwt=<dir> to be able to build bat.
286 kes Update src/win32/cats/bacula_cats.def to include the new
287 db_get_query_dbids() call on Win32.
289 kes Correct a problem when selecting a scratch volume and moving
290 it to another pool that lost some columns.
291 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
292 kes Enhance Autochanger error messages to include Volume and device name.
293 kes Rework prune_volumes() code to take account of InChanger flag,
294 and to handle recycling volumes going to the Scratch pool and
295 current pool because the RecyclePool directive.
296 kes Implement a better and more efficient db_get_query_dbids() to
297 handle creating and passing back a list of DBIds.
301 kes Start work on new more efficient DBId subroutine. First use
302 will be for recycling volume to Scratch inchanger.
303 kes Increase number of JobIds in pruning from 1000 to 10000.
304 This to be replaced by above routine.
305 kes Begin implementation of building Qt4 on Win32.
306 kes Correct typo in fix I added for bad TLS shutdown.
307 kes Pull 2.0.3 patches into patches directory.
308 kes Update Release notes. Include qt-console in line count.
309 kes Update Projects file.
311 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
312 bug in migration code where a job that spanned two volumes
315 kes Implement new BST_DESPOOLING blocked state. Change from locking
316 during despooling in SD to blocking. This means that other threads
317 can work with the device structure, in particular the reservations
318 system while despooling.
320 kes Fix return in reservation message queue that missed clearing
321 the jcr lock (implemented 26Jun07 below).
322 kes Rename a number of dev methods to make locking function names
324 kes Document locking in lock.c. Move lock structures to new file
327 kes Move reservations message lock to lock jcr only this
329 kes Move main SD locking code into lock.c (new file).
330 kes Update Win32 build to include lock.c
334 kes Dirk committed the qwt library code for drawing graphs in bat.
335 kes Tweak install of qwt so that it is integrated with ./configure.
337 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
338 out by Eric (my typo).
339 ebl Fix configure.in to get batch mode enable
340 kes Return correct string from authenticate.cpp in bat when connecting
342 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
343 spurious line drops when using TLS.
344 kes Do not file reparse points when restoring a file that already
347 kes Implement Windows reparse points -- similar to directories, but
348 we do not descend into it. This is a first cut. They seem to
349 be backed up, but restore is not yet tested.
350 kes Remove restore_blocking in tls code when shutting a socket to leave
351 it in blocking mode. Hopefully this will fix the encryption bug
352 reported by Frank Sweetser.
353 kes When opening a file for backup, tell the OS that we are going to
354 read it sequentially -- optimization.
355 kes Change variable names in authenticate_director() to not conflict
356 with member names in bat. Caused great confusion with compiler,
359 kes Queue openssl error messages in case of comm problem.
360 kes Do shutdown() call if socket terminated.
361 kes Remove some duplicated code in tls.c
362 kes Move more of the bsock member variables into private and access
364 kes Add Frank Sweetser's tls-test to the regression suite.
366 kes Add Swedish sv.po file
368 kes Don't print clock skew message in FD if less than 3 seconds diff.
369 kes Add a bit of VSS info to status client.
370 kes Implement a first cut of Vista VSS, using Win2003 code.
374 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
375 loaded tape but uses first drive).
376 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
377 This was indeed a Win32 issue.
379 kes Simplify search of autochanger for in-use Volume.
380 kes Fix exit condition of check for in-use volume. kes Remove
381 inappropriate my_postgresql_free_result() in db_close()
383 kes Fix bad return in FD when encryption signature not found.
384 Probably caused a crash.
385 kes Inhibit missing encryption signature error messages for
386 file types where no signature computed.
387 kes Correct inverted check on autochanger in reservation system.
388 kes Tweak debug code in autochanger reservation.
390 kes Add some additional locking in the cats directory in subroutines
391 that modify packet variables called from batch insert.
392 kes Rework how dcrs are allocated. new_dcr() can now be called
393 with an existing pointer, and it will simply clean it up.
394 This allows the reservation system to test various different
395 devices, and will permit easy device changes.
396 kes A bunch of changes all over to handle new new_dcr() calling
398 kes Work more on the Volume management in the SD. Remember Volumes
399 for tape drives and for autochangers (even virtual disk changers).
400 kes When looking at the Volume list to reserve a drive, handle
401 autochanger names correctly by interating through the changer
402 devices. Also call the Director to see if a Volume is suitable
404 kes Fix some bugs in bscan. Make sure all media records are written.
405 Make sure that valid JobMedia records are written for disk files.
406 Previously they were completely wrong.
407 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
408 that the URLs don't change and so that the developers will all
409 work off the same copy. Rebuild from scrach.
410 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
414 kes Fix seg fault in FD from incorrect digest size.
415 kes Fix argument to non-OpenSSL crypto.c subroutine.
419 kes Remove a few malloc()s from the encryption code.
420 kes Use the class calls to bsock in filed/backup.c and restore.c in
421 place of the old bnet_xxx code.
422 kes Implement code that does an on the fly calculation of the
423 signing digest during restore of encrypted files. It makes
424 a best guess at the algorithm, and if it is not correct, will
425 then revert to the old code which reads the file after it is
427 kes Implement at least one missing crypto stream in stream_to_ascii()
428 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
429 #877 where a reload with bad syntax causes Dir to exit.
431 Cut: 2.1.14 beta (not released)
433 kes Do not free a volume on a tape drive until another volume is
434 mounted and read, or the autochanger unloads the volume.
435 This should help the SD re-use volumes that are already mounted,
436 and should fix bug #886.
437 kes Apply patch from user brettedgar that allows gnome2-console include
438 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
439 kes Apply patch from Lucien Weller that fixes day of week calculation
440 because of DST flag problem. Fixes bug #887.
442 kes Move find_next_appendable_volume() to after acquiring a valid device
443 in reserve.c. This fixes bug #864 -- confirmed by reporter.
445 kes Unable to reproduce bug 872. However added additional testing for
447 kes Bug #874 resolved by documenting SQLite limitations.
448 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
449 kes Bug #881 resolved by removing typo in mtx-changer script.
450 kes Made Frank Sweetser's wiki the official Bacula wiki with his
451 approval. Added a link to the wiki on the web page, and implemented
452 a backup from http://paramount.ind.wpi.edu
454 kes Fix update allfrompool to pass pool name.
456 kes Convert to pure GPL v2 license.
457 kes Fix sscanf problems reported by Peter Buschman that caused
458 a bus error on Solaris.
459 kes Rework (simplify) the select prompt in bat.
460 kes Move get_jobid_from_tid() into lib and create a
462 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
463 should definitely fix the problem of lost error messages in the
465 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
466 kes Eliminate tcpd.h from the project. Enclose the #include from the
467 library with extern C ...
468 kes Add print of signal name when a signal is trapped.
472 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
474 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
475 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
476 makes SQLit3 run 30 times faster, though a bit less safe.
477 kes Implement --with-batch-insert in configure and detection of thread
478 safe libraries. It is on by default, but turned off if no thread
479 safe library (e.g. SQLite 2) is available.
481 kes Fix Bacula PostgreSQL buffer overruns.
482 kes Do better checking for NULL results returned from PostgreSQL;
483 implement retry for failed queries; clear results buffer after
484 failed query. Hopefully this will correct the PostgreSQL failures.
486 kes Implement algorithm to handle only one appendable volume with
487 Prefer Mounted Volumes = no.
488 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
489 returned from a query.
490 kes Make volume lock recursive.
491 kes Implement an additional volume reservation algorithm that
492 starts by considering all reserved volumes then uses the
493 old brute force algorithm of searching the resources to
494 find a suitable device.
495 kes Add new reservations debug code and refine the old code.
496 kes Update the win32/dll/bacula.defs file.
498 kes Tweak reservations algorithm to permit a few more cases, i.e.
499 volume reserved, but on different drive, ...
500 kes Enhance SD status to include Pool and Media Type for drive in a
501 more readable format (a bit longer).
502 kes Fix PostgreSQL double free.
504 kes Minor refactoring of restore decryption code.
505 kes Add code to smartall.c to detect double free of a buffer.
507 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
508 so that bsmtp will create a correct email address (mailbox only).
509 kes Modify 'memory' command so that the buffers are listed as 'In use'
510 to avoid confusion with Orphaned buffers.
511 kes I reworked the OpenSSL include/lib flags to be handled in
512 the standard Bacula way, which should fix bug #863 concerning
513 non-standard OpenSSL libraries.
515 kes Implement Help Browser window for bat.
516 kes Fix reload bug that reset StorageId to zero.
518 kes Fix TLS #ifdefing when TLS turned off.
519 kes Ensure that when labelling a tape with Slot=0 that InChanger
521 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
523 kes Add StartTime to final uar_sel_jobid_temp query so that we can
524 add DISTINCT (required by PostgreSQL).
525 kes Implement BSOCK authenticate_director() method. Eventually will
526 authenicate all daemons.
527 kes Move several more functions into the BSOCK class.
529 kes Add code to tell the OS that we no longer need a cached
530 file that we were reading. In findlib/bfile.c. Also,
531 only cache files that we are reading. Thanks to
532 Tobias Oetiker <tobi@oetiker.ch> for the idea.
533 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
534 kes Implement script to automatically generate cats and dll .def
536 kes Update README.mingw32 to include new .def file generation.
537 kes Correct typo in UTF-8 error message as reported by:
538 jhernandez <julianhernandez@gmail.com>
539 kes Add additional sm_check() code on debug level 1.
540 kes Set default debug level to 1.
541 kes Trap SIGABRT in attempt to get traceback.
543 kes Reduce bat connect timeout from 30 to 15 seconds.
544 kes More restructuring and implementing BSOCK class in place of
546 kes Remove a few unnecessary malloc() tests in crypto code.
547 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
548 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
549 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
551 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
553 kes Fix Verify InitCatalog. The attributes were not pointing to the
554 correct saved location.
555 kes Implement message callback so that GUI is sure to get all
556 daemon messages. Currently displayed in a dialog in bat.
557 kes Ignore SIGUSR2 (Bacula timer) in bat.
558 kes Apply regress patch from bug #859 to allow regress to work
559 with Solaris compiler.
561 kes Begin adding TLS support to bat.
562 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
563 clean up lex.c and make it more readable.
565 kes Move more bnet functions into the BSOCK class.
566 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
567 kes Complete change of berrno strerror() method to bstrerror()
571 kes Cleanup incorrect email addresses in bsmtp.
572 kes Make bat display initial messages rather than discard them.
574 kes First cut of adding .mod to the run command.
575 kes Implement auto display of messages in bat.
576 kes Enhanced preferences to allow all Bacula output to be
579 kes Try to make bsmtp date routines more generic.
580 kes Fixed bug #856 autochanger documentation.
581 kes Rework bsmtp date editing for Win32. This fixes bug #854.
582 kes Add new cats entry point so Win32 builds.
584 kes Attempt to fix bsmtp date editing on OSes without %z editing.
586 kes Do better checking for the MySQL 64 bit libraries looking for both
587 .a and .so libraries.
588 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
589 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
590 kes Require the thread safe version of MySQL during configure. Thanks
591 to Andre Noll for pointing this out.
592 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
593 continuing in migration code.
594 kes Apply implementation of tray-monitor font derived from gnome-console
595 submitted by Andreas Piesk <a.piesk@gmx.net>
597 kes Eliminate important memory loss in SQLite
598 kes Fixed the batch insert MySQL thread specific data that was not
599 being freed. See cats/mysql.c:db_thread_cleanup().
600 kes Fix restore before command.
601 kes Convert old hdr.name to name() in a few places.
602 kes Implement update jobid command.
603 kes Return all time_t dates in db_get_job_record()
604 kes Stop watchdog in SD earlier.
605 kes Put Pool just after Storage in please mount message.
606 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
609 kes Update the po files.
610 kes Fix Verify InitCatalog by making it cache attributes.
612 kes Change name bacula-bat to bat for man 1 page to correspond to
614 kes Check for client and store NULL pointers in status command. This
616 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
617 kes Fix sign extended editing of %p.
618 kes Clean out a little old #ifdefing in cats/mysql.c
620 kes If time diff between DIR and FD is more than 600 seconds convert
621 INFO message to WARNING.
622 kes Implement heap size display in status for all daemons.
623 kes Attempt to fix MySQL db open memory loss (not successfull).
624 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
625 kes Eliminate memory loss in MySQL (possibly other SQLs) during
626 Query. This looks like a MySQL but but by doing extra releases,
627 the memory goes away. This should fix bug #847.
629 kes When backup fails, cancel SD before waiting for sd termination.
630 kes If SD is waiting for FD to connect during cancel, wake up the
632 kes Fix fsf code so that errno is correctly reported.
633 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
635 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
636 so that Bacula doesn't later stumble into a seg fault.
637 kes Use the term Restore Client in the restore Job report.
638 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
639 the original job's FileSetId.
640 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
641 spooling in migration jobs. Not yet tested.
642 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
643 reading conf file from a pipe. However, do it with open_bpipe()
644 rather than popen. Not yet tested.
646 kes Fix an ugly bug where the VolCatBytes were getting updated
648 kes Implement bconsole memory command that prints current memory
649 usage, plus smartalloc dump.
650 kes Clarify some error messages in backup, admin, and migrate.
651 kes Shrink label dialog to smaller size.
652 kes Invert Cancel OK buttons on restore to be OK Cancel.
653 kes More strerror() to bstrerror() conversions.
655 kes Start implementing bstrerror() in place of strerror().
656 kes Stripping path -- seems to work.
658 kes Prevent door and port files from being restored (mostly
660 kes Free an unreleased buffer in compat code.
661 kes Change console Job name from *Console* to -Console- to eliminate
662 Win32 filename problems. Put Win32 path separator when creating
663 Console file. This fixes bug #846.
664 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
666 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
668 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
669 to force Win32 error message.
671 kes First cut strip path. The data should be passed to the FD,
672 but nothing is done with it yet.
673 kes Enhance the digest and signature routines in the crypto
674 library to accept a JCR and to use it to print error messages
675 so that they will go in the Job report rather than the daemon's
677 kes Simplify some of the verify signature code.
678 kes Simplify a few of the alternative returns in the signature
681 ebl Use only POSIX regex instead of GNU regex in breg.c for
682 File relocation. It fix broken freebsd compilation.
683 kes Convert all other Dir files to use new ua class message
685 kes Tentative fix for missing digest signature in bug 807.
686 kes Correct handle problem in new win32_ftruncate routine.
687 kes Convert ua_purge.c and ua_update.c to use new ua class
688 message routines for bat.
690 kes Correct incorrect installation of LICENSE in Win32 installer.
691 kes Display LICENSE at the beginning of the Win32 install.
692 kes Attempt to correct the need for the png files to be installed
694 kes Reapply my bat.conf install script in qt-console. I think I
695 editted bat.pro instead of bat.pro.in and it was lost.
696 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
697 the /var/lock/subsys for subsysdir. Also corrects typos in the
700 kes First cut update job.
701 kes Correct configure to include qmake of src/qt-console directory.
703 kes Make restore job yes/mod/no print in one command so GUI works.
704 kes First cut implementing backup and restore client.
705 kes Correct editing in Verify output that caused a seg fault.
707 kes Insure that bat.conf is not overwritten during installation.
708 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
709 while I was implementing migration in March 2006 !
711 ebl Cleanup file relocation, using char *RegexWhere instead of
712 char *where + bool where_use_regexp
713 kes Update some manpages and add bat manpage.
714 kes Make a first cut at converting bacula.spec.in for bwx-console
716 kes Apply patch from John Goerzen to add hostname as fourth argument
717 to make_catalog_backup script.
718 kes Fix typos I introduced into bsmtp.c
719 kes Make pm_strxxx() routines handle input of NULL pointer. This
720 is to protect from NULL pointers returned from SQL databases.
721 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
722 kes Add more debug to FIFO code -- fix fifo regression test.
724 kes Implement posix_fadvise in FD, and for reading spool files in SD.
725 kes Add thread timer to bnet_connect() to break from OS if wait time
728 kes Update Win32 build to include new files, new symbols, and
730 kes Implement socket level heartbeat (tcp_keepidle)
731 ebl Commit File relocation patch
732 kes Make bat have 'make install' target.
733 kes Warn during install if old gnome-console binary found.
734 kes Warn during install if old wx-console binary found.
735 kes Add -8 option to bsmtp command line to add content type utf-8.
736 Fixes bug #809. (Character coding problem in bsmtp).
737 kes If < is found in target (from, to, cc) then do not enclose the
738 target in < > in bsmtp. Fixes bug #772 (malformed address).
739 kes When printing certain items in dbcheck, stop after 300000.
740 Fixes bug #822. (dbcheck loops).
741 kes Incorrect status in Dir after waiting for mount with poll set.
744 kes Extend idea of Prefer Mounted Volumes to mean a volume about
746 kes Print waiting to reserve a device every 5 mins.
748 kes Don't call close_part in label.c if tape and relabel.
749 kes Don't free volume if busy in close() -- should help with
751 ebl Fix #824 RunScript bug (After script could be execute twice)
752 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
753 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
754 Add a regression script to test RunScript
756 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
759 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
760 deprecated. No additional bugs will be fixed, and they will be dropped
761 in a future release (probably 2.4.0).
762 kes Change name of wx-console to bwx-console to make it more Bacula
764 kes Change the name of gnome-console to bgnome-console to make it
767 kes Some time in March, a Feature Request with patch from Jorj Bauer
768 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
770 The ability for the director to validate a Client (FD) CN against
771 an arbitrary set of patterns rather than the hostname, with
772 A new 'TLS Allowed CN' set of directives which are implemented
773 in the Client resource. Then pattern matching is used in place
774 of hostname matching against the Certificate's CN. As an example, we
775 have certificates which (a) use a local CA, and (b) have a CN of the
777 kes Add new/changed entry points to Win32 build
778 kes Create unaccepted-projects for projects that are not accepted.
779 kes Simplify locking in the reservations system.
780 kes Add more debug code in reservations.
781 kes Make sure error condition on reserving a volume is handled correctly.
782 kes Correct handling of volume_in_use.
783 kes Correct handling of initializing a device.
784 kes Move handling of broadcasting releasing a device into release_device().
785 kes Correct attaching dcr to dev so that it is only done if device
786 is properly initiated.
788 kes Locking debug level tweaks in SD.
789 kes Tweak new Volume code.
791 kes Add exec external-command [wait-seconds] to bconsole. This
792 executes the external-command. Note! normally external-command
793 should be enclosed in double quotes.
794 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
795 it should normally be off in a production system.
797 kes Implement die command for SD so that we can force it to dump.
798 kes Implement SD lock debug code.
799 kes Implement new algorithm for keeping Volume list in SD. It
800 is now owned by the device.
802 kes Implement new code for freeing in use volumes that should
803 resolve if not all, some of the problems of multiple drive
804 tape conflicts described in bug 801.
806 kes Fix gui/bacula-web/images files in svn.
807 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
809 ebl Fix a bug in batch mode (in string escape)
810 kes Correct migration prune SQL typo that crept in in a
813 kes Move bnet_despool() into class in bsock.c
814 kes Modify job report to include director name and Build OS.
815 kes Move drop root privilege and check_catalog() before fork.
816 kes Add update database scripts (version 9 to 10) to updatedb directory.
818 ebl Check size and age of each file after its backup to see if
819 it has changed during backup, if 'checkfilechanges' is set.
820 The FD will do an extra check (stat(2)) after
821 each file backup. mtime, ctime and size are compared with
822 'before backup' information. If time or size mismatch, an
823 error message will be generated. You must upgrade FD to use it.
825 kes Make database name and user configurable
826 --with-db-name=xxx --with-db-user=xxx
827 kes Add back database type to message.c for debugging.
829 kes Implement dir_sql() which issues an SQL query.
830 kes Modify bat medialist to use dir_sql() and do some minor C++
831 formatting as well as eliminating a number of pointers, simplifing
834 kes Fix some of the mtx-changer grep commands for tape label readers.
835 kes Convert a number of bsendmsg into the appropriate send/warning/error
837 kes Suppress the using database message in the .sql command.
838 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
840 kes Add context menu for floating a window.
841 kes Some minor cleanup and name changes in qt-console
842 kes Add doing mt setblk 0 in Win32 mtx-changer.
843 kes Apply Martin's bug fix to move definition of ENODATA for
845 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
848 kes More pruning cleanup.
849 kes Turn on wait_for_drive by default in mtx-changer.
850 kes Turn on Batch insert code by default as it now passes regression.
851 kes Add ./configure --enable-bat to enable building of Bat.
852 No install yet though.
854 kes Implement a new .sql command for bat.
855 kes Implement code to turn off pruning in obtaining the next volume.
856 Pruning is turned off for the status dir command, but turned on
857 for SD requests and for the list nextvolume command.
859 kes Correct Qmsg() that was not updated correctly when committing a
860 previous change (probably the recent TLS patch).
862 kes Write new subroutine is_volume_purged() that explicitly checks
863 if the Volume is purged, and if so marks it as such. This should
864 resolve problems reported about needing to mount twice to recycle
866 kes Rewrite pruning algorithm to do more work in the SQL engine, and
867 to pass a list of JobIds to be deleted to SQL. Also, minimize the
868 amount of duplicated code.
869 kes Do volume pruning only for the Media Type desired (reduces pruning time
870 if multiple Media Types are in the same pool).
871 kes Implement more detailed info in the Job report for the Bacula version
873 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
875 ebl Add bbatch tool to bench database and insert mode.
876 Fix sql quote stuff in batch mode
877 Fix sql stuff for mysql
879 kes Correct problems with am/pm scheduling. Fixes bug #808.
880 kes Implement new prunning code that prunes up to 1000 jobs at
881 the same time. The same technique can be applied to a number
882 of other prune/purge subroutines.
883 kes Add an insanity check when starting a new tape job to ensure
884 that the tape position has not been changed. If so fail the
886 kes Fix Win32 build for dlls to add the folllowing:
887 src/lib/bsock.c -- new file with new entry points
888 src/lib/dlist.c -- new entry points
889 src/cats/sql_create.c -- new entry point
890 src/cats/sql_cmds.c -- new DATA item exported
892 ebl batch mode cleanup bscan-test is ok now.
893 kes Implement SD code to check length of disk volume before appending.
895 kes Correct return status on db_batch... routines.
896 kes Add call to db_write_batch_file_records() to migration code.
897 ebl Fix AfterJob timing
898 kes Move the checking of the database in initializion of the Director
899 to after we drop privileges. This avoids the need for both root
900 and bacula access to the DB.
901 kes Correct a misplaced variable definition in src/filed/backup.c
902 kes Correct how the new batch insert db_create_attributes_record()
903 uses the arguments. Caused a seg fault in bscan.
904 kes Implement lock() and unlock() methods in DEVICE class.
905 Implement block() and set_block(xx) methods in DEVICE class.
906 kes Modify bnet_connect() so that it uses time() to check for the
907 wait time expiring (on some OSes, some system calls may not
909 kes Modify Verify to obtain the previous JobId when it is actually
910 running rather than at schedule time (as it was in 1.38.x).
911 kes Fix src/job.c to handle MaxWaitTime correctly. This should
913 kes When checking pid in pid file, continue running if the pid is
914 the same as ours. This occurs on IRIX after a system crash.
917 kes Extend new GUI API.
918 kes Make the ua structure a class, and implement send_msg(),
919 error_msg(), warning_msg(), and info_msg().
921 kes Apply fix from for building wx-console on the Mac from
923 kes Implement new select mechanism for GUI programs.
924 kes Reorganize initialization of stackedWidgets in bat.
926 kes Add updated nagios plugin supplied by Christian Masopust.
928 kes More bat implementation.
929 kes File migrate bug with Pool Occupancy using mediaid instead
930 of jobids. Fixes bug #795.
931 kes Fix orphaned buffers in filed backup and verify due to
932 crypto buffers not freed during errors. Fixes bug #789.
933 kes Extend new GUI api code to tree commands.
934 kes Ensure that tree and dot commands check console ACLs.
935 kes Permit marking directory with trailing slash.
936 kes Allow 20 console connections (instead of only 10).
938 kes Add smartctl call to bacula-sd.conf as an example of getting
941 kes Modify jobq.c to let simultaneous restore jobs run. This may
942 cause them to fail if they cannot get a drive.
943 kes Add Client Connect Wait to Storage daemon to permit users to
944 modify the time the SD waits for a FD connection.
946 kes Correct virtual changer check which was backwards. This caused
947 volumes to be unloaded into slots already occupied.
949 kes Apply Command ACL filter to JobId list in restore command.
950 kes Correct typeo in var.c patch.
952 kes Don't let Bacula prune File or Job records for the current Job.
953 kes Fix variable substitution pad + inc bug reported (with patch)
956 kes Correct SQLite log table index as reported by Luca Berra.
958 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
960 kes Begin implementing new comm signals for API.
961 kes Fix a few places in lib/message.c where the open fd may
963 kes Continue implementing lib/bsock.c (real class). Make jcr,
964 who, host, and port private. There are new methods to access
965 them for non-class use. This required touching a number of files.
967 kes Add LANG=C to autoconf/randpass so it works with languages other
968 than English. Fixes bug #788.
970 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
972 You will not be able to generate Include/Exclude list any more.
973 It will be fixed soon.
974 If you want to use this, you can apply
975 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
977 kes Restore of sockets created false error messages because Bacula
978 no longer restores sockets, but the code was still trying to
979 set the attributes on a non-existent file. Reported by a user.
980 ebl finish RecyclePool feature
981 Media will takes Pool.RecyclePool
982 when moving from Scratch to a Pool or when user will do
983 update volume=xxx frompool
984 To use it, add RecyclePool = aPool to your Pool resource
987 RecyclePool = Scratch
991 kes Expand new BSOCK class adding signal() and new BNET signals.
992 kes Begin enhancing the dot commands adding a new API function
993 that returns more information and will make it easier
994 to interface to the Director from a program.
996 kes Make DEVICE fd private. Its new name is m_fd, and can be
997 obtained with dev->fd() outside the class. This is the
998 first of many DEVICE members to be made private.
999 kes Implement Michael Renner's idea on having a virtual disk
1000 changer. I made some minor modifications (e.g. I did not
1001 implement the Virtual Changer directive, but simply set
1002 the Changer Command to an empty string.
1004 kes Implement a BSOCK send() method that writes the whole record
1005 in a single write() request rather than in two.
1006 ebl add update volume=xxx recyclepool=yyyy
1007 volume takes recyclepool from pool when using update volume=xxx from pool
1009 kes Fix encryption deblocking bug, which caused some restored files
1010 to be truncated. This fixes bug #763.
1011 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1012 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1014 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1015 ebl Use btime_t instead of uint64_t in media patch.
1017 kes Optimize the use of the database a bit in the Status dir command.
1018 Only open it when needed, ensure that if any previous database
1019 was opened, it is closed.
1021 kes Correct VolCatBytes bug from media patch.
1022 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1023 in the case of orphaned records.
1024 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1025 and File records in 300K chunks to be more efficient. This
1026 idea came from Juan Luis Frances (if I remember right).
1027 kes Apply Eric's scratch patch that moves a purged Volume to
1028 the RecyclePool. Question: how is RecyclePool set? what
1029 happens to the ScratchPool?
1030 kes Apply Eric's media patch that collects read/write media
1031 times as well as byte counts. This patch requires a
1032 simultaneous upgrade of the DIR and SD. Note, there
1033 should be some way to turn off timing. I'm not sure
1034 times are in Bacula units.
1035 kes Apply Eric's batch-insert patch.
1037 kes Update projects list.
1039 kes Implement Include/Exclude file lists in FD as dlists using
1040 the new dlistString class. This permits efficiently having
1041 large include/exclude lists and completes project Item 25.
1042 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1043 console is authorized to cancel the job. This fixes bug
1045 kes Modify SD so that the VolCatJobs medium record is updated
1046 at the beginning of a Job rather than the end. This
1047 fixes bug #775 where exceeding MaxVolJobs caused jobs
1049 kes Added a mutex around getting and setting Volume information
1050 so that multiple simultaneous jobs will single thread.
1052 Switch to using Subversion
1053 kes Remove src/pygtk-console/ from configure
1055 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1056 plus the entrypoints.
1057 kes Apply patch supplied that corrects debug print
1058 in canceling jobs for max run time. Supplied as
1059 part of bug #621, which was previously fixed.
1061 kes Test on job_canceled() and sd_msg_thread_done inside
1062 loop starting the message thread to avoid a race condition.
1064 kes Remove rl_catch_signal from console.c as it conflicted
1065 with the header definition. Fixes bug #765.
1066 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1068 kes Clarify some stored/acquire messages to indicate if the
1069 problem is with read or append.
1071 kes Fix memory leak with storage ids in cats/sql_get.c
1072 kes Terminate watchdog earlier to avoid reference to released
1073 memory -- reported by Jason Austin.
1074 kes Move closing the database from jobq.c to the director daemon
1075 termination routine. This fixes memory leaks for shadow jobs
1076 (i.e. migration jobs).
1077 kes Free up the unique jobid chain items in migrate.c. This fixes
1078 a memory leak problem.
1079 kes Convert some ugly looking for statements to use foreach_alist
1080 in findlib/find.c. This will facilitate converting the structures
1081 to use dlist (for large include/exclude lists).
1082 kes Fix a bug in the btree.c and btree.h routines, then rename them
1083 rblist and add them to be built in src/lib. Include some new
1084 methods written by Rudolf Cejka that make the code more readable
1085 (hides some of the ugly casting).
1086 kes Add set_next() and set_prev() methods which make the code much more
1087 readable. Also add a new dlistString class that facilitates storing
1088 strings in dlists. To be used in the large include/exclude lists.
1089 kes Make some trivial modifications to lib/tree.h that use rblist
1090 rather than dlist for storing the tree links. This was suggested
1091 by Rudolf Cejka. The result of this is that the restore tree now
1092 uses red-black binary trees rather than simple linked lists. This
1093 should give rather dramatic speed improvements for directories
1094 contining large numbers of directories/files (more than 10000).
1096 kes Fix maxruntime bug #621.
1098 ebl Implement the include JobID in spool file name project.
1099 kes Reorder projects file in order determined by Jan 2007 vote.
1100 kes Implement item #12 on project list -- quick release of FD by
1102 kes Fix open of SQLite3 db where user does not have write permission
1103 so that DIR does not crash. Fixes bug #761.
1105 kes Add back missing @ in Win32 Makefile.
1106 kes Change 'Device not configured to autolabel' from INFO
1108 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1109 which should restart an indefinite # of times.
1110 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1111 other DIR specifications.
1113 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1114 Fix path quoting in SQLite scripts.
1115 Fix problems with SHGetFolderPath.
1117 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1119 kes Fix Job restart on error bug that promotes an Inc to a Full
1120 backup. This should fix bug #755.
1121 kes Add qt-console and first cut of code.
1125 kes Fix Bacula->Documentation link on Win32 to point to index.html
1126 instead of bacula.html. Fixed bug #750.
1127 kes Return JobId in db_get_job_record() when JobId==0. This should
1129 kes Do not release source pointers when restarting a failed job.
1131 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1132 This *should* fix bug #747.
1133 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1136 kes Modify USTORE constructor to set an empty store_source string,
1137 and don't copy the store_source string in a cancel. Hopefully
1138 this will fix Arno's seg fault, bug #744.
1139 kes Add back code to disable conio in configure. Fixes bug #743.
1140 kes Correct the Options scanner in the FD to correctly handle
1141 SHA1 option, which was eating the next option. Reported by
1143 kes Add code to indicate when the SD is spooling, spool wait, and
1144 despooling as requested by Alan Brown.
1146 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob