1 Technical notes on version 2.3
5 kes Return insert attributes error message in db msg buffer to avoid
7 kes Separate batch init error messages.
8 kes Make SD code that contructs attribute insert check string lengths
10 kes If Dir gets an error during inserting attributes, cancel SD.
11 This reduces unnecessary error messages.
13 kes Correct search boolean for getting Volume info
14 ebl Cleanup batch code.
15 kes Back out one small change to the reservation system (reserving a volume).
16 kes Rework how a Volume is mounted. It is now much more intelligent and
17 will always attempt to use any mounted volume if possible and reduces
18 calls to the Director asking about volumes.
20 kes Turn off some code when batch insert not enabled.
21 kes Edit FD name in connect error messages.
22 kes Rework the reservation system to take into account that the Director
23 might give us a Volume that is different from the current one being
24 used, and to ensure that we don't exceed Maximum Volume Jobs.
25 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
26 fatal error with multiple jobs running'
27 kes Add more debug code in reservation system.
28 kes Implement maxvol-test to check bug #947.
30 kes Add code to handle tray monitor separated from Win32 FD.
31 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
33 kes Add missed return in fixing verify bug -- trunk only.
34 ebl Fix a command parser issue causing a director segfault.
35 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
37 kes Increase the max block size to 4MB fixes bug #957.
38 kes ERABT if user sets min block size > max block size. Fixes bug #956.
39 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
40 is not properly mounted (recognized) during a poll.
41 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
42 Job that has differences reports Verify OK.
43 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
45 ebl Add an option to operate on all pools with update vol parameters.
46 This complete the project 20. Patch from Nigel Stepp.
47 ebl Add history support to bconsole when using readline.
48 Using Ctrl-D to exit doesn't update .bconsole_history
49 kes Modify new volume algorithm to use max MediaId for generating next
50 volume number rather than the count of Volumes. This should essentially
51 eliminate the failure rate if some volumes were deleted. Bug #921.
52 kes Begin implemention of Optimize Job Scheduling.
53 kes Implement restore callback that Dirk and I agreed on for bat
54 restore. This fixes bug #928. Restore of backup of zero files fails.
55 kes Fix SQL Catalog logging which broke with new db_escape_string
58 kes Fix bacula_cats.def for new db_escape_string().
59 kes Increase size of name string when FD making connection to SD.
60 May fix bug #953. FD->SD connection failure.
62 kes Add code to help Dan debug 2drive-incremental-2disk test.
63 kes Add code to try to fix bug #908.
64 kes Add waits to multiple exit detection code to try to force pid
65 file to always be deleted.
66 kes Restore good dev.tar.gz to rescue set appropriate binary property.
68 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
69 trying to switch drives by checking for blocking before unblocking.
71 kes Cancel storage daemon in all cases where FD reports error. This
72 should fix virtually all cases of bug #920.
73 kes Fix db_escape_string() for MySQL which did not compile.
75 kes Fix error message that was clobbered when Dir tells SD it does not
76 have write permission on Volume. This should fix a minor point
77 in bug #942, but not the main problem.
78 kes Add code to cancel job in SD if FD connection fails. This should
80 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
81 dvl Pass jcr and db into db_escape_string() to enable better escaping
83 kes Fix migration code to get correct Volume name with multiple volumes
84 by skipping |. Fixes bug #936.
85 kes Implement patch supplied by Landon to fix bug #944 where using
86 TLS with bconsole uses 99+% of the CPU.
87 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
89 kes Move patches into patches directory.
91 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
94 ebl Using "m" in bconsole will show messages like before,
96 kes Fix bug #935, and probably also bug #903 where files were not
97 restored. MediaId was not properly set in JobMedia record after
100 kes Suppress chown and chmod error messages if the FD is not running
103 kes Apply Martin Simmons' patch that should turn off the new API usage
104 when batch insert is turned off allowing building on older
106 kes Add ./configure search in qwt-qt4 for qwt package
108 kes Bacula is now free of 3rd party GPL copyrighted code!
110 kes Add guid_to_name.c/h which replace idcache.
111 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
113 ebl Detect if new PosgreSQL batch insert API is present.
114 kes Correct incorrect mempool call causing Director crash. Occurs on
115 systems without va_copy().
116 sb Update spec files for 2.2.1 release
118 kes Fix memory pool call in ua_output.c. bug #934.
119 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
120 Add test program to fnmatch.c
122 kes Integrate patch to README.vc8 from
123 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
124 edit it to get it into Unix patch format.
125 kes Implement mkpath.c to replace old FSF makepath.c
127 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
129 Release Version 2.2.1
131 kes Update POTFILES.in
132 kes Cleanup a few underquoted AC_DEFUNs in configure
133 kes Apply patch from Martin Simmons that adds a test for va_copy to
136 kes Fix bug #921 by increasing the number of tries to create a new volume
138 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
139 can be called multiple times. Implement a version for machines
140 without va_copy() that gets a big buffer.
142 kes Integrate more portable zone offset code into bsmtp.c
143 Submitted by Attila Fülöp.
145 kes Fix bad SD->FD return status reported by
146 (James Harper) <james.harper@bendigoit.com.au>
147 ebl Fix a bug in read_close_session which return random status
148 thanks to James Harper
150 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
151 and directory names during restore of single file/directories.
152 kes Add sanity checks to .sql command when string is empty. Hopefully
153 that will resolve Dirks Director crash.
155 kes Apply patch submitted by Martin Simmons that corrects a seg fault
156 in the bsmtp chat subroutine when debug is >= 10.
158 kes Fix Director crash when running bat SQL queries.
159 kes Add David's notes on Item 8: Copy pools.
161 kes Rework projects file to be current and ready for a vote.
162 kes Enhance lex scanner error message.
164 kes Tweak LICENSE file to mention BSD code.
165 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
166 if specified on the ./configure.
167 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
168 This class is intended to allow us to open a second bsock to the
169 Director while in the restore subdialog.
171 kes Fix configure to create bat Makefile before creating dependencies.
172 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
173 kes Add a tooltip to the tray monitor.
174 dvl Set the Director's PID file before dropping privs. This fixes
177 kes Update AUTHORs file
178 kes Increase the default max concurrent jobs to 20 in FD and SD to
179 correspond with the default .conf files.
180 kes Rewrite the Win32 service routines. This eliminates the 3 copies
181 some different, of the same file created by RN when porting the
183 kes Rearrange some of the Win32 directories and the placement of the files
185 kes Set DEVELOPER flag in version.h
187 ========================================================================
188 Release Version 2.2.0
190 kes Apply a second doc patch from Marc.
191 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
192 improves the tips section that discusses how to setup multiple
195 kes Update bat README file.
196 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
197 corrects a typo in the Recycle status check in db_find_next_volume().
198 This will probably fix a number of annoying problems with multiple
200 kes Modify most of dird/msgchan.c to use bsock class calls rather than
201 bnet calls -- no functionality change.
203 kes Modify the Verify output to specify if files are missing on
204 the Volume(s) or disk. Fixes confusion in bug #916.
205 kes When more than one Volume is read in a migration job, the last
206 Volume bytes reported are from the last read volume rather than
207 the last written volume. Fixed. This fixes bug #910.
208 kes Fix display of Recycle flag after update volume=foo recycle=yes.
209 It previously printed New Recyle flag is: no. This fixes bug
212 kes Correct seg fault when switching tape drives during restore.
213 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
214 be used until after 2.2.0 release.
216 kes Remove fnmatch() in SD that permitted wild card specifications.
219 kes Fix %g in filename returned by SQL for browse tree reported by
221 kes Fix configure so that it puts config.out in the cwd rather than
223 kes Attempt to fix the locking problem reported by Eric in bug #906.
224 kes Make berrno class to leave errno unchanged after constructor call.
225 kes Make bnet_server use the heap rather than the stack to allocate
226 its socket fd pointers to avoid a crash at termination. Problem
227 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
229 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
230 and putting it in depkgs-qt along with Qt4.3.
232 kes Rework code in acquire.c that switches drives for reading when
233 the Media Type does not match. This should fix bug #906
235 ebl Fix a director segfault during job setup #907
236 kes Correct seg fault in postgresql when first operation returns no
237 rows. Fixes Dirks File browser problem seg fault with bat.
239 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
240 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
243 kes Implement PopUp YES/NO dialog for bat.
245 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
247 kes Correct RunScript to terminate job in FD on failure.
248 kes Change abort_on_error and AbortJobOnError to fail_on_error
249 and FailJobOnError in RunScripts.
250 kes Minor tweaks of code formating in RunScripts, principally to
251 avoid depassing 80 columns.
253 kes Eliminate one #ifdef Win32 in bsmtp
254 kes Implement grow tool to grow a file for testing very large databases.
255 kes Add big-vol-test to test Bacula seeking with > 5GB.
258 kes Modify find_next_volume() to return all values in Media record.
259 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
263 kes Update Release notes
265 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
266 Warning, in previous beta version, all media get from scratch keep their
269 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
270 This should fix bug #842. Made a note to look at removing the temp
271 files at the end of the install.
272 kes Add ability to mount and unmount a file device providing it is
273 marked as being removable and has the appropriate mount and unmount
274 commands defined in the Device resource. This fixes bug #830.
275 kes When applying a storage override, release all previous storage
276 definitions rather than just prepending the new storage.
277 This should prevent a good deal of confusion.
279 kes Implement ./configure search for qwt libraries.
281 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
282 Win32 FD. This should fix bug #893.
283 kes Remove an unnecessary beep in Win32 init code.
284 kes Update copyright dates in Win32 executable about boxes.
285 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
286 code with a BSD getopt.c and getopt.h.
287 kes Remove sched.h from the Win32 compat directory -- not used.
288 kes Remove the Exit menu item from the Win32 tray monitor. If you really
289 need to shut it down, do it through the services panel or the command
291 kes Remove some inappropriate Bacula FSFE copyrights.
292 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
293 kes Fix regress config non-portable test as pointed out by
294 Florian Heigl <florian.heigl@gmail.com>
295 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
296 as pointed out by Florian Heigl <florian.heigl@gmail.com>
298 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
299 Reported by Frank Sweetser.
303 kes Fix client-only build.
304 kes Integrate client-only fixes for bsys (initgroups) and conio from
305 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
306 kes Make arguments to get_scratch_volume() in same order as other
308 kes Rework the prune_volumes() subroutine so that after purging and
309 no volume found in desired pool, it will check for a scratch
310 volume. This prevents recycling the whole scratch pool.
311 kes Add code to status storage to print boffset_t (largefile support).
313 kes Move qwt (Graphics libarary for Qt4) to depkgs.
314 kes You now need a --with-qwt=<dir> to be able to build bat.
315 kes Update src/win32/cats/bacula_cats.def to include the new
316 db_get_query_dbids() call on Win32.
318 kes Correct a problem when selecting a scratch volume and moving
319 it to another pool that lost some columns.
320 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
321 kes Enhance Autochanger error messages to include Volume and device name.
322 kes Rework prune_volumes() code to take account of InChanger flag,
323 and to handle recycling volumes going to the Scratch pool and
324 current pool because the RecyclePool directive.
325 kes Implement a better and more efficient db_get_query_dbids() to
326 handle creating and passing back a list of DBIds.
330 kes Start work on new more efficient DBId subroutine. First use
331 will be for recycling volume to Scratch inchanger.
332 kes Increase number of JobIds in pruning from 1000 to 10000.
333 This to be replaced by above routine.
334 kes Begin implementation of building Qt4 on Win32.
335 kes Correct typo in fix I added for bad TLS shutdown.
336 kes Pull 2.0.3 patches into patches directory.
337 kes Update Release notes. Include qt-console in line count.
338 kes Update Projects file.
340 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
341 bug in migration code where a job that spanned two volumes
344 kes Implement new BST_DESPOOLING blocked state. Change from locking
345 during despooling in SD to blocking. This means that other threads
346 can work with the device structure, in particular the reservations
347 system while despooling.
349 kes Fix return in reservation message queue that missed clearing
350 the jcr lock (implemented 26Jun07 below).
351 kes Rename a number of dev methods to make locking function names
353 kes Document locking in lock.c. Move lock structures to new file
356 kes Move reservations message lock to lock jcr only this
358 kes Move main SD locking code into lock.c (new file).
359 kes Update Win32 build to include lock.c
363 kes Dirk committed the qwt library code for drawing graphs in bat.
364 kes Tweak install of qwt so that it is integrated with ./configure.
366 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
367 out by Eric (my typo).
368 ebl Fix configure.in to get batch mode enable
369 kes Return correct string from authenticate.cpp in bat when connecting
371 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
372 spurious line drops when using TLS.
373 kes Do not file reparse points when restoring a file that already
376 kes Implement Windows reparse points -- similar to directories, but
377 we do not descend into it. This is a first cut. They seem to
378 be backed up, but restore is not yet tested.
379 kes Remove restore_blocking in tls code when shutting a socket to leave
380 it in blocking mode. Hopefully this will fix the encryption bug
381 reported by Frank Sweetser.
382 kes When opening a file for backup, tell the OS that we are going to
383 read it sequentially -- optimization.
384 kes Change variable names in authenticate_director() to not conflict
385 with member names in bat. Caused great confusion with compiler,
388 kes Queue openssl error messages in case of comm problem.
389 kes Do shutdown() call if socket terminated.
390 kes Remove some duplicated code in tls.c
391 kes Move more of the bsock member variables into private and access
393 kes Add Frank Sweetser's tls-test to the regression suite.
395 kes Add Swedish sv.po file
397 kes Don't print clock skew message in FD if less than 3 seconds diff.
398 kes Add a bit of VSS info to status client.
399 kes Implement a first cut of Vista VSS, using Win2003 code.
403 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
404 loaded tape but uses first drive).
405 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
406 This was indeed a Win32 issue.
408 kes Simplify search of autochanger for in-use Volume.
409 kes Fix exit condition of check for in-use volume. kes Remove
410 inappropriate my_postgresql_free_result() in db_close()
412 kes Fix bad return in FD when encryption signature not found.
413 Probably caused a crash.
414 kes Inhibit missing encryption signature error messages for
415 file types where no signature computed.
416 kes Correct inverted check on autochanger in reservation system.
417 kes Tweak debug code in autochanger reservation.
419 kes Add some additional locking in the cats directory in subroutines
420 that modify packet variables called from batch insert.
421 kes Rework how dcrs are allocated. new_dcr() can now be called
422 with an existing pointer, and it will simply clean it up.
423 This allows the reservation system to test various different
424 devices, and will permit easy device changes.
425 kes A bunch of changes all over to handle new new_dcr() calling
427 kes Work more on the Volume management in the SD. Remember Volumes
428 for tape drives and for autochangers (even virtual disk changers).
429 kes When looking at the Volume list to reserve a drive, handle
430 autochanger names correctly by interating through the changer
431 devices. Also call the Director to see if a Volume is suitable
433 kes Fix some bugs in bscan. Make sure all media records are written.
434 Make sure that valid JobMedia records are written for disk files.
435 Previously they were completely wrong.
436 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
437 that the URLs don't change and so that the developers will all
438 work off the same copy. Rebuild from scrach.
439 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
443 kes Fix seg fault in FD from incorrect digest size.
444 kes Fix argument to non-OpenSSL crypto.c subroutine.
448 kes Remove a few malloc()s from the encryption code.
449 kes Use the class calls to bsock in filed/backup.c and restore.c in
450 place of the old bnet_xxx code.
451 kes Implement code that does an on the fly calculation of the
452 signing digest during restore of encrypted files. It makes
453 a best guess at the algorithm, and if it is not correct, will
454 then revert to the old code which reads the file after it is
456 kes Implement at least one missing crypto stream in stream_to_ascii()
457 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
458 #877 where a reload with bad syntax causes Dir to exit.
460 Cut: 2.1.14 beta (not released)
462 kes Do not free a volume on a tape drive until another volume is
463 mounted and read, or the autochanger unloads the volume.
464 This should help the SD re-use volumes that are already mounted,
465 and should fix bug #886.
466 kes Apply patch from user brettedgar that allows gnome2-console include
467 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
468 kes Apply patch from Lucien Weller that fixes day of week calculation
469 because of DST flag problem. Fixes bug #887.
471 kes Move find_next_appendable_volume() to after acquiring a valid device
472 in reserve.c. This fixes bug #864 -- confirmed by reporter.
474 kes Unable to reproduce bug 872. However added additional testing for
476 kes Bug #874 resolved by documenting SQLite limitations.
477 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
478 kes Bug #881 resolved by removing typo in mtx-changer script.
479 kes Made Frank Sweetser's wiki the official Bacula wiki with his
480 approval. Added a link to the wiki on the web page, and implemented
481 a backup from http://paramount.ind.wpi.edu
483 kes Fix update allfrompool to pass pool name.
485 kes Convert to pure GPL v2 license.
486 kes Fix sscanf problems reported by Peter Buschman that caused
487 a bus error on Solaris.
488 kes Rework (simplify) the select prompt in bat.
489 kes Move get_jobid_from_tid() into lib and create a
491 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
492 should definitely fix the problem of lost error messages in the
494 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
495 kes Eliminate tcpd.h from the project. Enclose the #include from the
496 library with extern C ...
497 kes Add print of signal name when a signal is trapped.
501 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
503 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
504 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
505 makes SQLit3 run 30 times faster, though a bit less safe.
506 kes Implement --with-batch-insert in configure and detection of thread
507 safe libraries. It is on by default, but turned off if no thread
508 safe library (e.g. SQLite 2) is available.
510 kes Fix Bacula PostgreSQL buffer overruns.
511 kes Do better checking for NULL results returned from PostgreSQL;
512 implement retry for failed queries; clear results buffer after
513 failed query. Hopefully this will correct the PostgreSQL failures.
515 kes Implement algorithm to handle only one appendable volume with
516 Prefer Mounted Volumes = no.
517 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
518 returned from a query.
519 kes Make volume lock recursive.
520 kes Implement an additional volume reservation algorithm that
521 starts by considering all reserved volumes then uses the
522 old brute force algorithm of searching the resources to
523 find a suitable device.
524 kes Add new reservations debug code and refine the old code.
525 kes Update the win32/dll/bacula.defs file.
527 kes Tweak reservations algorithm to permit a few more cases, i.e.
528 volume reserved, but on different drive, ...
529 kes Enhance SD status to include Pool and Media Type for drive in a
530 more readable format (a bit longer).
531 kes Fix PostgreSQL double free.
533 kes Minor refactoring of restore decryption code.
534 kes Add code to smartall.c to detect double free of a buffer.
536 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
537 so that bsmtp will create a correct email address (mailbox only).
538 kes Modify 'memory' command so that the buffers are listed as 'In use'
539 to avoid confusion with Orphaned buffers.
540 kes I reworked the OpenSSL include/lib flags to be handled in
541 the standard Bacula way, which should fix bug #863 concerning
542 non-standard OpenSSL libraries.
544 kes Implement Help Browser window for bat.
545 kes Fix reload bug that reset StorageId to zero.
547 kes Fix TLS #ifdefing when TLS turned off.
548 kes Ensure that when labelling a tape with Slot=0 that InChanger
550 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
552 kes Add StartTime to final uar_sel_jobid_temp query so that we can
553 add DISTINCT (required by PostgreSQL).
554 kes Implement BSOCK authenticate_director() method. Eventually will
555 authenicate all daemons.
556 kes Move several more functions into the BSOCK class.
558 kes Add code to tell the OS that we no longer need a cached
559 file that we were reading. In findlib/bfile.c. Also,
560 only cache files that we are reading. Thanks to
561 Tobias Oetiker <tobi@oetiker.ch> for the idea.
562 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
563 kes Implement script to automatically generate cats and dll .def
565 kes Update README.mingw32 to include new .def file generation.
566 kes Correct typo in UTF-8 error message as reported by:
567 jhernandez <julianhernandez@gmail.com>
568 kes Add additional sm_check() code on debug level 1.
569 kes Set default debug level to 1.
570 kes Trap SIGABRT in attempt to get traceback.
572 kes Reduce bat connect timeout from 30 to 15 seconds.
573 kes More restructuring and implementing BSOCK class in place of
575 kes Remove a few unnecessary malloc() tests in crypto code.
576 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
577 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
578 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
580 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
582 kes Fix Verify InitCatalog. The attributes were not pointing to the
583 correct saved location.
584 kes Implement message callback so that GUI is sure to get all
585 daemon messages. Currently displayed in a dialog in bat.
586 kes Ignore SIGUSR2 (Bacula timer) in bat.
587 kes Apply regress patch from bug #859 to allow regress to work
588 with Solaris compiler.
590 kes Begin adding TLS support to bat.
591 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
592 clean up lex.c and make it more readable.
594 kes Move more bnet functions into the BSOCK class.
595 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
596 kes Complete change of berrno strerror() method to bstrerror()
600 kes Cleanup incorrect email addresses in bsmtp.
601 kes Make bat display initial messages rather than discard them.
603 kes First cut of adding .mod to the run command.
604 kes Implement auto display of messages in bat.
605 kes Enhanced preferences to allow all Bacula output to be
608 kes Try to make bsmtp date routines more generic.
609 kes Fixed bug #856 autochanger documentation.
610 kes Rework bsmtp date editing for Win32. This fixes bug #854.
611 kes Add new cats entry point so Win32 builds.
613 kes Attempt to fix bsmtp date editing on OSes without %z editing.
615 kes Do better checking for the MySQL 64 bit libraries looking for both
616 .a and .so libraries.
617 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
618 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
619 kes Require the thread safe version of MySQL during configure. Thanks
620 to Andre Noll for pointing this out.
621 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
622 continuing in migration code.
623 kes Apply implementation of tray-monitor font derived from gnome-console
624 submitted by Andreas Piesk <a.piesk@gmx.net>
626 kes Eliminate important memory loss in SQLite
627 kes Fixed the batch insert MySQL thread specific data that was not
628 being freed. See cats/mysql.c:db_thread_cleanup().
629 kes Fix restore before command.
630 kes Convert old hdr.name to name() in a few places.
631 kes Implement update jobid command.
632 kes Return all time_t dates in db_get_job_record()
633 kes Stop watchdog in SD earlier.
634 kes Put Pool just after Storage in please mount message.
635 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
638 kes Update the po files.
639 kes Fix Verify InitCatalog by making it cache attributes.
641 kes Change name bacula-bat to bat for man 1 page to correspond to
643 kes Check for client and store NULL pointers in status command. This
645 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
646 kes Fix sign extended editing of %p.
647 kes Clean out a little old #ifdefing in cats/mysql.c
649 kes If time diff between DIR and FD is more than 600 seconds convert
650 INFO message to WARNING.
651 kes Implement heap size display in status for all daemons.
652 kes Attempt to fix MySQL db open memory loss (not successfull).
653 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
654 kes Eliminate memory loss in MySQL (possibly other SQLs) during
655 Query. This looks like a MySQL but but by doing extra releases,
656 the memory goes away. This should fix bug #847.
658 kes When backup fails, cancel SD before waiting for sd termination.
659 kes If SD is waiting for FD to connect during cancel, wake up the
661 kes Fix fsf code so that errno is correctly reported.
662 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
664 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
665 so that Bacula doesn't later stumble into a seg fault.
666 kes Use the term Restore Client in the restore Job report.
667 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
668 the original job's FileSetId.
669 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
670 spooling in migration jobs. Not yet tested.
671 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
672 reading conf file from a pipe. However, do it with open_bpipe()
673 rather than popen. Not yet tested.
675 kes Fix an ugly bug where the VolCatBytes were getting updated
677 kes Implement bconsole memory command that prints current memory
678 usage, plus smartalloc dump.
679 kes Clarify some error messages in backup, admin, and migrate.
680 kes Shrink label dialog to smaller size.
681 kes Invert Cancel OK buttons on restore to be OK Cancel.
682 kes More strerror() to bstrerror() conversions.
684 kes Start implementing bstrerror() in place of strerror().
685 kes Stripping path -- seems to work.
687 kes Prevent door and port files from being restored (mostly
689 kes Free an unreleased buffer in compat code.
690 kes Change console Job name from *Console* to -Console- to eliminate
691 Win32 filename problems. Put Win32 path separator when creating
692 Console file. This fixes bug #846.
693 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
695 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
697 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
698 to force Win32 error message.
700 kes First cut strip path. The data should be passed to the FD,
701 but nothing is done with it yet.
702 kes Enhance the digest and signature routines in the crypto
703 library to accept a JCR and to use it to print error messages
704 so that they will go in the Job report rather than the daemon's
706 kes Simplify some of the verify signature code.
707 kes Simplify a few of the alternative returns in the signature
710 ebl Use only POSIX regex instead of GNU regex in breg.c for
711 File relocation. It fix broken freebsd compilation.
712 kes Convert all other Dir files to use new ua class message
714 kes Tentative fix for missing digest signature in bug 807.
715 kes Correct handle problem in new win32_ftruncate routine.
716 kes Convert ua_purge.c and ua_update.c to use new ua class
717 message routines for bat.
719 kes Correct incorrect installation of LICENSE in Win32 installer.
720 kes Display LICENSE at the beginning of the Win32 install.
721 kes Attempt to correct the need for the png files to be installed
723 kes Reapply my bat.conf install script in qt-console. I think I
724 editted bat.pro instead of bat.pro.in and it was lost.
725 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
726 the /var/lock/subsys for subsysdir. Also corrects typos in the
729 kes First cut update job.
730 kes Correct configure to include qmake of src/qt-console directory.
732 kes Make restore job yes/mod/no print in one command so GUI works.
733 kes First cut implementing backup and restore client.
734 kes Correct editing in Verify output that caused a seg fault.
736 kes Insure that bat.conf is not overwritten during installation.
737 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
738 while I was implementing migration in March 2006 !
740 ebl Cleanup file relocation, using char *RegexWhere instead of
741 char *where + bool where_use_regexp
742 kes Update some manpages and add bat manpage.
743 kes Make a first cut at converting bacula.spec.in for bwx-console
745 kes Apply patch from John Goerzen to add hostname as fourth argument
746 to make_catalog_backup script.
747 kes Fix typos I introduced into bsmtp.c
748 kes Make pm_strxxx() routines handle input of NULL pointer. This
749 is to protect from NULL pointers returned from SQL databases.
750 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
751 kes Add more debug to FIFO code -- fix fifo regression test.
753 kes Implement posix_fadvise in FD, and for reading spool files in SD.
754 kes Add thread timer to bnet_connect() to break from OS if wait time
757 kes Update Win32 build to include new files, new symbols, and
759 kes Implement socket level heartbeat (tcp_keepidle)
760 ebl Commit File relocation patch
761 kes Make bat have 'make install' target.
762 kes Warn during install if old gnome-console binary found.
763 kes Warn during install if old wx-console binary found.
764 kes Add -8 option to bsmtp command line to add content type utf-8.
765 Fixes bug #809. (Character coding problem in bsmtp).
766 kes If < is found in target (from, to, cc) then do not enclose the
767 target in < > in bsmtp. Fixes bug #772 (malformed address).
768 kes When printing certain items in dbcheck, stop after 300000.
769 Fixes bug #822. (dbcheck loops).
770 kes Incorrect status in Dir after waiting for mount with poll set.
773 kes Extend idea of Prefer Mounted Volumes to mean a volume about
775 kes Print waiting to reserve a device every 5 mins.
777 kes Don't call close_part in label.c if tape and relabel.
778 kes Don't free volume if busy in close() -- should help with
780 ebl Fix #824 RunScript bug (After script could be execute twice)
781 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
782 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
783 Add a regression script to test RunScript
785 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
788 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
789 deprecated. No additional bugs will be fixed, and they will be dropped
790 in a future release (probably 2.4.0).
791 kes Change name of wx-console to bwx-console to make it more Bacula
793 kes Change the name of gnome-console to bgnome-console to make it
796 kes Some time in March, a Feature Request with patch from Jorj Bauer
797 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
799 The ability for the director to validate a Client (FD) CN against
800 an arbitrary set of patterns rather than the hostname, with
801 A new 'TLS Allowed CN' set of directives which are implemented
802 in the Client resource. Then pattern matching is used in place
803 of hostname matching against the Certificate's CN. As an example, we
804 have certificates which (a) use a local CA, and (b) have a CN of the
806 kes Add new/changed entry points to Win32 build
807 kes Create unaccepted-projects for projects that are not accepted.
808 kes Simplify locking in the reservations system.
809 kes Add more debug code in reservations.
810 kes Make sure error condition on reserving a volume is handled correctly.
811 kes Correct handling of volume_in_use.
812 kes Correct handling of initializing a device.
813 kes Move handling of broadcasting releasing a device into release_device().
814 kes Correct attaching dcr to dev so that it is only done if device
815 is properly initiated.
817 kes Locking debug level tweaks in SD.
818 kes Tweak new Volume code.
820 kes Add exec external-command [wait-seconds] to bconsole. This
821 executes the external-command. Note! normally external-command
822 should be enclosed in double quotes.
823 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
824 it should normally be off in a production system.
826 kes Implement die command for SD so that we can force it to dump.
827 kes Implement SD lock debug code.
828 kes Implement new algorithm for keeping Volume list in SD. It
829 is now owned by the device.
831 kes Implement new code for freeing in use volumes that should
832 resolve if not all, some of the problems of multiple drive
833 tape conflicts described in bug 801.
835 kes Fix gui/bacula-web/images files in svn.
836 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
838 ebl Fix a bug in batch mode (in string escape)
839 kes Correct migration prune SQL typo that crept in in a
842 kes Move bnet_despool() into class in bsock.c
843 kes Modify job report to include director name and Build OS.
844 kes Move drop root privilege and check_catalog() before fork.
845 kes Add update database scripts (version 9 to 10) to updatedb directory.
847 ebl Check size and age of each file after its backup to see if
848 it has changed during backup, if 'checkfilechanges' is set.
849 The FD will do an extra check (stat(2)) after
850 each file backup. mtime, ctime and size are compared with
851 'before backup' information. If time or size mismatch, an
852 error message will be generated. You must upgrade FD to use it.
854 kes Make database name and user configurable
855 --with-db-name=xxx --with-db-user=xxx
856 kes Add back database type to message.c for debugging.
858 kes Implement dir_sql() which issues an SQL query.
859 kes Modify bat medialist to use dir_sql() and do some minor C++
860 formatting as well as eliminating a number of pointers, simplifing
863 kes Fix some of the mtx-changer grep commands for tape label readers.
864 kes Convert a number of bsendmsg into the appropriate send/warning/error
866 kes Suppress the using database message in the .sql command.
867 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
869 kes Add context menu for floating a window.
870 kes Some minor cleanup and name changes in qt-console
871 kes Add doing mt setblk 0 in Win32 mtx-changer.
872 kes Apply Martin's bug fix to move definition of ENODATA for
874 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
877 kes More pruning cleanup.
878 kes Turn on wait_for_drive by default in mtx-changer.
879 kes Turn on Batch insert code by default as it now passes regression.
880 kes Add ./configure --enable-bat to enable building of Bat.
881 No install yet though.
883 kes Implement a new .sql command for bat.
884 kes Implement code to turn off pruning in obtaining the next volume.
885 Pruning is turned off for the status dir command, but turned on
886 for SD requests and for the list nextvolume command.
888 kes Correct Qmsg() that was not updated correctly when committing a
889 previous change (probably the recent TLS patch).
891 kes Write new subroutine is_volume_purged() that explicitly checks
892 if the Volume is purged, and if so marks it as such. This should
893 resolve problems reported about needing to mount twice to recycle
895 kes Rewrite pruning algorithm to do more work in the SQL engine, and
896 to pass a list of JobIds to be deleted to SQL. Also, minimize the
897 amount of duplicated code.
898 kes Do volume pruning only for the Media Type desired (reduces pruning time
899 if multiple Media Types are in the same pool).
900 kes Implement more detailed info in the Job report for the Bacula version
902 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
904 ebl Add bbatch tool to bench database and insert mode.
905 Fix sql quote stuff in batch mode
906 Fix sql stuff for mysql
908 kes Correct problems with am/pm scheduling. Fixes bug #808.
909 kes Implement new prunning code that prunes up to 1000 jobs at
910 the same time. The same technique can be applied to a number
911 of other prune/purge subroutines.
912 kes Add an insanity check when starting a new tape job to ensure
913 that the tape position has not been changed. If so fail the
915 kes Fix Win32 build for dlls to add the folllowing:
916 src/lib/bsock.c -- new file with new entry points
917 src/lib/dlist.c -- new entry points
918 src/cats/sql_create.c -- new entry point
919 src/cats/sql_cmds.c -- new DATA item exported
921 ebl batch mode cleanup bscan-test is ok now.
922 kes Implement SD code to check length of disk volume before appending.
924 kes Correct return status on db_batch... routines.
925 kes Add call to db_write_batch_file_records() to migration code.
926 ebl Fix AfterJob timing
927 kes Move the checking of the database in initializion of the Director
928 to after we drop privileges. This avoids the need for both root
929 and bacula access to the DB.
930 kes Correct a misplaced variable definition in src/filed/backup.c
931 kes Correct how the new batch insert db_create_attributes_record()
932 uses the arguments. Caused a seg fault in bscan.
933 kes Implement lock() and unlock() methods in DEVICE class.
934 Implement block() and set_block(xx) methods in DEVICE class.
935 kes Modify bnet_connect() so that it uses time() to check for the
936 wait time expiring (on some OSes, some system calls may not
938 kes Modify Verify to obtain the previous JobId when it is actually
939 running rather than at schedule time (as it was in 1.38.x).
940 kes Fix src/job.c to handle MaxWaitTime correctly. This should
942 kes When checking pid in pid file, continue running if the pid is
943 the same as ours. This occurs on IRIX after a system crash.
946 kes Extend new GUI API.
947 kes Make the ua structure a class, and implement send_msg(),
948 error_msg(), warning_msg(), and info_msg().
950 kes Apply fix from for building wx-console on the Mac from
952 kes Implement new select mechanism for GUI programs.
953 kes Reorganize initialization of stackedWidgets in bat.
955 kes Add updated nagios plugin supplied by Christian Masopust.
957 kes More bat implementation.
958 kes File migrate bug with Pool Occupancy using mediaid instead
959 of jobids. Fixes bug #795.
960 kes Fix orphaned buffers in filed backup and verify due to
961 crypto buffers not freed during errors. Fixes bug #789.
962 kes Extend new GUI api code to tree commands.
963 kes Ensure that tree and dot commands check console ACLs.
964 kes Permit marking directory with trailing slash.
965 kes Allow 20 console connections (instead of only 10).
967 kes Add smartctl call to bacula-sd.conf as an example of getting
970 kes Modify jobq.c to let simultaneous restore jobs run. This may
971 cause them to fail if they cannot get a drive.
972 kes Add Client Connect Wait to Storage daemon to permit users to
973 modify the time the SD waits for a FD connection.
975 kes Correct virtual changer check which was backwards. This caused
976 volumes to be unloaded into slots already occupied.
978 kes Apply Command ACL filter to JobId list in restore command.
979 kes Correct typeo in var.c patch.
981 kes Don't let Bacula prune File or Job records for the current Job.
982 kes Fix variable substitution pad + inc bug reported (with patch)
985 kes Correct SQLite log table index as reported by Luca Berra.
987 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
989 kes Begin implementing new comm signals for API.
990 kes Fix a few places in lib/message.c where the open fd may
992 kes Continue implementing lib/bsock.c (real class). Make jcr,
993 who, host, and port private. There are new methods to access
994 them for non-class use. This required touching a number of files.
996 kes Add LANG=C to autoconf/randpass so it works with languages other
997 than English. Fixes bug #788.
999 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1001 You will not be able to generate Include/Exclude list any more.
1002 It will be fixed soon.
1003 If you want to use this, you can apply
1004 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1006 kes Restore of sockets created false error messages because Bacula
1007 no longer restores sockets, but the code was still trying to
1008 set the attributes on a non-existent file. Reported by a user.
1009 ebl finish RecyclePool feature
1010 Media will takes Pool.RecyclePool
1011 when moving from Scratch to a Pool or when user will do
1012 update volume=xxx frompool
1013 To use it, add RecyclePool = aPool to your Pool resource
1016 RecyclePool = Scratch
1020 kes Expand new BSOCK class adding signal() and new BNET signals.
1021 kes Begin enhancing the dot commands adding a new API function
1022 that returns more information and will make it easier
1023 to interface to the Director from a program.
1025 kes Make DEVICE fd private. Its new name is m_fd, and can be
1026 obtained with dev->fd() outside the class. This is the
1027 first of many DEVICE members to be made private.
1028 kes Implement Michael Renner's idea on having a virtual disk
1029 changer. I made some minor modifications (e.g. I did not
1030 implement the Virtual Changer directive, but simply set
1031 the Changer Command to an empty string.
1033 kes Implement a BSOCK send() method that writes the whole record
1034 in a single write() request rather than in two.
1035 ebl add update volume=xxx recyclepool=yyyy
1036 volume takes recyclepool from pool when using update volume=xxx from pool
1038 kes Fix encryption deblocking bug, which caused some restored files
1039 to be truncated. This fixes bug #763.
1040 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1041 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1043 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1044 ebl Use btime_t instead of uint64_t in media patch.
1046 kes Optimize the use of the database a bit in the Status dir command.
1047 Only open it when needed, ensure that if any previous database
1048 was opened, it is closed.
1050 kes Correct VolCatBytes bug from media patch.
1051 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1052 in the case of orphaned records.
1053 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1054 and File records in 300K chunks to be more efficient. This
1055 idea came from Juan Luis Frances (if I remember right).
1056 kes Apply Eric's scratch patch that moves a purged Volume to
1057 the RecyclePool. Question: how is RecyclePool set? what
1058 happens to the ScratchPool?
1059 kes Apply Eric's media patch that collects read/write media
1060 times as well as byte counts. This patch requires a
1061 simultaneous upgrade of the DIR and SD. Note, there
1062 should be some way to turn off timing. I'm not sure
1063 times are in Bacula units.
1064 kes Apply Eric's batch-insert patch.
1066 kes Update projects list.
1068 kes Implement Include/Exclude file lists in FD as dlists using
1069 the new dlistString class. This permits efficiently having
1070 large include/exclude lists and completes project Item 25.
1071 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1072 console is authorized to cancel the job. This fixes bug
1074 kes Modify SD so that the VolCatJobs medium record is updated
1075 at the beginning of a Job rather than the end. This
1076 fixes bug #775 where exceeding MaxVolJobs caused jobs
1078 kes Added a mutex around getting and setting Volume information
1079 so that multiple simultaneous jobs will single thread.
1081 Switch to using Subversion
1082 kes Remove src/pygtk-console/ from configure
1084 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1085 plus the entrypoints.
1086 kes Apply patch supplied that corrects debug print
1087 in canceling jobs for max run time. Supplied as
1088 part of bug #621, which was previously fixed.
1090 kes Test on job_canceled() and sd_msg_thread_done inside
1091 loop starting the message thread to avoid a race condition.
1093 kes Remove rl_catch_signal from console.c as it conflicted
1094 with the header definition. Fixes bug #765.
1095 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1097 kes Clarify some stored/acquire messages to indicate if the
1098 problem is with read or append.
1100 kes Fix memory leak with storage ids in cats/sql_get.c
1101 kes Terminate watchdog earlier to avoid reference to released
1102 memory -- reported by Jason Austin.
1103 kes Move closing the database from jobq.c to the director daemon
1104 termination routine. This fixes memory leaks for shadow jobs
1105 (i.e. migration jobs).
1106 kes Free up the unique jobid chain items in migrate.c. This fixes
1107 a memory leak problem.
1108 kes Convert some ugly looking for statements to use foreach_alist
1109 in findlib/find.c. This will facilitate converting the structures
1110 to use dlist (for large include/exclude lists).
1111 kes Fix a bug in the btree.c and btree.h routines, then rename them
1112 rblist and add them to be built in src/lib. Include some new
1113 methods written by Rudolf Cejka that make the code more readable
1114 (hides some of the ugly casting).
1115 kes Add set_next() and set_prev() methods which make the code much more
1116 readable. Also add a new dlistString class that facilitates storing
1117 strings in dlists. To be used in the large include/exclude lists.
1118 kes Make some trivial modifications to lib/tree.h that use rblist
1119 rather than dlist for storing the tree links. This was suggested
1120 by Rudolf Cejka. The result of this is that the restore tree now
1121 uses red-black binary trees rather than simple linked lists. This
1122 should give rather dramatic speed improvements for directories
1123 contining large numbers of directories/files (more than 10000).
1125 kes Fix maxruntime bug #621.
1127 ebl Implement the include JobID in spool file name project.
1128 kes Reorder projects file in order determined by Jan 2007 vote.
1129 kes Implement item #12 on project list -- quick release of FD by
1131 kes Fix open of SQLite3 db where user does not have write permission
1132 so that DIR does not crash. Fixes bug #761.
1134 kes Add back missing @ in Win32 Makefile.
1135 kes Change 'Device not configured to autolabel' from INFO
1137 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1138 which should restart an indefinite # of times.
1139 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1140 other DIR specifications.
1142 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1143 Fix path quoting in SQLite scripts.
1144 Fix problems with SHGetFolderPath.
1146 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1148 kes Fix Job restart on error bug that promotes an Inc to a Full
1149 backup. This should fix bug #755.
1150 kes Add qt-console and first cut of code.
1154 kes Fix Bacula->Documentation link on Win32 to point to index.html
1155 instead of bacula.html. Fixed bug #750.
1156 kes Return JobId in db_get_job_record() when JobId==0. This should
1158 kes Do not release source pointers when restarting a failed job.
1160 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1161 This *should* fix bug #747.
1162 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1165 kes Modify USTORE constructor to set an empty store_source string,
1166 and don't copy the store_source string in a cancel. Hopefully
1167 this will fix Arno's seg fault, bug #744.
1168 kes Add back code to disable conio in configure. Fixes bug #743.
1169 kes Correct the Options scanner in the FD to correctly handle
1170 SHA1 option, which was eating the next option. Reported by
1172 kes Add code to indicate when the SD is spooling, spool wait, and
1173 despooling as requested by Alan Brown.
1175 Version 2.0.0 released: 4 January 2007