1 Technical notes on version 2.3
5 kes Modify new volume algorithm to use max MediaId for generating next
6 volume number rather than the count of Volumes. This should essentially
7 eliminate the failure rate if some volumes were deleted. Bug #921.
8 kes Begin implemention of Optimize Job Scheduling.
9 kes Implement restore callback that Dirk and I agreed on for bat
10 restore. This fixes bug #928. Restore of backup of zero files fails.
11 kes Fix SQL Catalog logging which broke with new db_escape_string
14 kes Fix bacula_cats.def for new db_escape_string().
15 kes Increase size of name string when FD making connection to SD.
16 May fix bug #953. FD->SD connection failure.
18 kes Add code to help Dan debug 2drive-incremental-2disk test.
19 kes Add code to try to fix bug #908.
20 kes Add waits to multiple exit detection code to try to force pid
21 file to always be deleted.
22 kes Restore good dev.tar.gz to rescue set appropriate binary property.
24 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
25 trying to switch drives by checking for blocking before unblocking.
27 kes Cancel storage daemon in all cases where FD reports error. This
28 should fix virtually all cases of bug #920.
29 kes Fix db_escape_string() for MySQL which did not compile.
31 kes Fix error message that was clobbered when Dir tells SD it does not
32 have write permission on Volume. This should fix a minor point
33 in bug #942, but not the main problem.
34 kes Add code to cancel job in SD if FD connection fails. This should
36 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
37 dvl Pass jcr and db into db_escape_string() to enable better escaping
39 kes Fix migration code to get correct Volume name with multiple volumes
40 by skipping |. Fixes bug #936.
41 kes Implement patch supplied by Landon to fix bug #944 where using
42 TLS with bconsole uses 99+% of the CPU.
43 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
45 kes Move patches into patches directory.
47 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
50 ebl Using "m" in bconsole will show messages like before,
52 kes Fix bug #935, and probably also bug #903 where files were not
53 restored. MediaId was not properly set in JobMedia record after
56 kes Suppress chown and chmod error messages if the FD is not running
59 kes Apply Martin Simmons' patch that should turn off the new API usage
60 when batch insert is turned off allowing building on older
62 kes Add ./configure search in qwt-qt4 for qwt package
64 kes Bacula is now free of 3rd party GPL copyrighted code!
66 kes Add guid_to_name.c/h which replace idcache.
67 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
69 ebl Detect if new PosgreSQL batch insert API is present.
70 kes Correct incorrect mempool call causing Director crash. Occurs on
71 systems without va_copy().
72 sb Update spec files for 2.2.1 release
74 kes Fix memory pool call in ua_output.c. bug #934.
75 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
76 Add test program to fnmatch.c
78 kes Integrate patch to README.vc8 from
79 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
80 edit it to get it into Unix patch format.
81 kes Implement mkpath.c to replace old FSF makepath.c
83 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
87 kes Update POTFILES.in
88 kes Cleanup a few underquoted AC_DEFUNs in configure
89 kes Apply patch from Martin Simmons that adds a test for va_copy to
92 kes Fix bug #921 by increasing the number of tries to create a new volume
94 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
95 can be called multiple times. Implement a version for machines
96 without va_copy() that gets a big buffer.
98 kes Integrate more portable zone offset code into bsmtp.c
99 Submitted by Attila Fülöp.
101 kes Fix bad SD->FD return status reported by
102 (James Harper) <james.harper@bendigoit.com.au>
103 ebl Fix a bug in read_close_session which return random status
104 thanks to James Harper
106 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
107 and directory names during restore of single file/directories.
108 kes Add sanity checks to .sql command when string is empty. Hopefully
109 that will resolve Dirks Director crash.
111 kes Apply patch submitted by Martin Simmons that corrects a seg fault
112 in the bsmtp chat subroutine when debug is >= 10.
114 kes Fix Director crash when running bat SQL queries.
115 kes Add David's notes on Item 8: Copy pools.
117 kes Rework projects file to be current and ready for a vote.
118 kes Enhance lex scanner error message.
120 kes Tweak LICENSE file to mention BSD code.
121 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
122 if specified on the ./configure.
123 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
124 This class is intended to allow us to open a second bsock to the
125 Director while in the restore subdialog.
127 kes Fix configure to create bat Makefile before creating dependencies.
128 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
129 kes Add a tooltip to the tray monitor.
130 dvl Set the Director's PID file before dropping privs. This fixes
133 kes Update AUTHORs file
134 kes Increase the default max concurrent jobs to 20 in FD and SD to
135 correspond with the default .conf files.
136 kes Rewrite the Win32 service routines. This eliminates the 3 copies
137 some different, of the same file created by RN when porting the
139 kes Rearrange some of the Win32 directories and the placement of the files
141 kes Set DEVELOPER flag in version.h
143 ========================================================================
144 Release Version 2.2.0
146 kes Apply a second doc patch from Marc.
147 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
148 improves the tips section that discusses how to setup multiple
151 kes Update bat README file.
152 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
153 corrects a typo in the Recycle status check in db_find_next_volume().
154 This will probably fix a number of annoying problems with multiple
156 kes Modify most of dird/msgchan.c to use bsock class calls rather than
157 bnet calls -- no functionality change.
159 kes Modify the Verify output to specify if files are missing on
160 the Volume(s) or disk. Fixes confusion in bug #916.
161 kes When more than one Volume is read in a migration job, the last
162 Volume bytes reported are from the last read volume rather than
163 the last written volume. Fixed. This fixes bug #910.
164 kes Fix display of Recycle flag after update volume=foo recycle=yes.
165 It previously printed New Recyle flag is: no. This fixes bug
168 kes Correct seg fault when switching tape drives during restore.
169 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
170 be used until after 2.2.0 release.
172 kes Remove fnmatch() in SD that permitted wild card specifications.
175 kes Fix %g in filename returned by SQL for browse tree reported by
177 kes Fix configure so that it puts config.out in the cwd rather than
179 kes Attempt to fix the locking problem reported by Eric in bug #906.
180 kes Make berrno class to leave errno unchanged after constructor call.
181 kes Make bnet_server use the heap rather than the stack to allocate
182 its socket fd pointers to avoid a crash at termination. Problem
183 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
185 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
186 and putting it in depkgs-qt along with Qt4.3.
188 kes Rework code in acquire.c that switches drives for reading when
189 the Media Type does not match. This should fix bug #906
191 ebl Fix a director segfault during job setup #907
192 kes Correct seg fault in postgresql when first operation returns no
193 rows. Fixes Dirks File browser problem seg fault with bat.
195 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
196 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
199 kes Implement PopUp YES/NO dialog for bat.
201 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
203 kes Correct RunScript to terminate job in FD on failure.
204 kes Change abort_on_error and AbortJobOnError to fail_on_error
205 and FailJobOnError in RunScripts.
206 kes Minor tweaks of code formating in RunScripts, principally to
207 avoid depassing 80 columns.
209 kes Eliminate one #ifdef Win32 in bsmtp
210 kes Implement grow tool to grow a file for testing very large databases.
211 kes Add big-vol-test to test Bacula seeking with > 5GB.
214 kes Modify find_next_volume() to return all values in Media record.
215 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
219 kes Update Release notes
221 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
222 Warning, in previous beta version, all media get from scratch keep their
225 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
226 This should fix bug #842. Made a note to look at removing the temp
227 files at the end of the install.
228 kes Add ability to mount and unmount a file device providing it is
229 marked as being removable and has the appropriate mount and unmount
230 commands defined in the Device resource. This fixes bug #830.
231 kes When applying a storage override, release all previous storage
232 definitions rather than just prepending the new storage.
233 This should prevent a good deal of confusion.
235 kes Implement ./configure search for qwt libraries.
237 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
238 Win32 FD. This should fix bug #893.
239 kes Remove an unnecessary beep in Win32 init code.
240 kes Update copyright dates in Win32 executable about boxes.
241 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
242 code with a BSD getopt.c and getopt.h.
243 kes Remove sched.h from the Win32 compat directory -- not used.
244 kes Remove the Exit menu item from the Win32 tray monitor. If you really
245 need to shut it down, do it through the services panel or the command
247 kes Remove some inappropriate Bacula FSFE copyrights.
248 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
249 kes Fix regress config non-portable test as pointed out by
250 Florian Heigl <florian.heigl@gmail.com>
251 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
252 as pointed out by Florian Heigl <florian.heigl@gmail.com>
254 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
255 Reported by Frank Sweetser.
259 kes Fix client-only build.
260 kes Integrate client-only fixes for bsys (initgroups) and conio from
261 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
262 kes Make arguments to get_scratch_volume() in same order as other
264 kes Rework the prune_volumes() subroutine so that after purging and
265 no volume found in desired pool, it will check for a scratch
266 volume. This prevents recycling the whole scratch pool.
267 kes Add code to status storage to print boffset_t (largefile support).
269 kes Move qwt (Graphics libarary for Qt4) to depkgs.
270 kes You now need a --with-qwt=<dir> to be able to build bat.
271 kes Update src/win32/cats/bacula_cats.def to include the new
272 db_get_query_dbids() call on Win32.
274 kes Correct a problem when selecting a scratch volume and moving
275 it to another pool that lost some columns.
276 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
277 kes Enhance Autochanger error messages to include Volume and device name.
278 kes Rework prune_volumes() code to take account of InChanger flag,
279 and to handle recycling volumes going to the Scratch pool and
280 current pool because the RecyclePool directive.
281 kes Implement a better and more efficient db_get_query_dbids() to
282 handle creating and passing back a list of DBIds.
286 kes Start work on new more efficient DBId subroutine. First use
287 will be for recycling volume to Scratch inchanger.
288 kes Increase number of JobIds in pruning from 1000 to 10000.
289 This to be replaced by above routine.
290 kes Begin implementation of building Qt4 on Win32.
291 kes Correct typo in fix I added for bad TLS shutdown.
292 kes Pull 2.0.3 patches into patches directory.
293 kes Update Release notes. Include qt-console in line count.
294 kes Update Projects file.
296 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
297 bug in migration code where a job that spanned two volumes
300 kes Implement new BST_DESPOOLING blocked state. Change from locking
301 during despooling in SD to blocking. This means that other threads
302 can work with the device structure, in particular the reservations
303 system while despooling.
305 kes Fix return in reservation message queue that missed clearing
306 the jcr lock (implemented 26Jun07 below).
307 kes Rename a number of dev methods to make locking function names
309 kes Document locking in lock.c. Move lock structures to new file
312 kes Move reservations message lock to lock jcr only this
314 kes Move main SD locking code into lock.c (new file).
315 kes Update Win32 build to include lock.c
319 kes Dirk committed the qwt library code for drawing graphs in bat.
320 kes Tweak install of qwt so that it is integrated with ./configure.
322 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
323 out by Eric (my typo).
324 ebl Fix configure.in to get batch mode enable
325 kes Return correct string from authenticate.cpp in bat when connecting
327 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
328 spurious line drops when using TLS.
329 kes Do not file reparse points when restoring a file that already
332 kes Implement Windows reparse points -- similar to directories, but
333 we do not descend into it. This is a first cut. They seem to
334 be backed up, but restore is not yet tested.
335 kes Remove restore_blocking in tls code when shutting a socket to leave
336 it in blocking mode. Hopefully this will fix the encryption bug
337 reported by Frank Sweetser.
338 kes When opening a file for backup, tell the OS that we are going to
339 read it sequentially -- optimization.
340 kes Change variable names in authenticate_director() to not conflict
341 with member names in bat. Caused great confusion with compiler,
344 kes Queue openssl error messages in case of comm problem.
345 kes Do shutdown() call if socket terminated.
346 kes Remove some duplicated code in tls.c
347 kes Move more of the bsock member variables into private and access
349 kes Add Frank Sweetser's tls-test to the regression suite.
351 kes Add Swedish sv.po file
353 kes Don't print clock skew message in FD if less than 3 seconds diff.
354 kes Add a bit of VSS info to status client.
355 kes Implement a first cut of Vista VSS, using Win2003 code.
359 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
360 loaded tape but uses first drive).
361 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
362 This was indeed a Win32 issue.
364 kes Simplify search of autochanger for in-use Volume.
365 kes Fix exit condition of check for in-use volume. kes Remove
366 inappropriate my_postgresql_free_result() in db_close()
368 kes Fix bad return in FD when encryption signature not found.
369 Probably caused a crash.
370 kes Inhibit missing encryption signature error messages for
371 file types where no signature computed.
372 kes Correct inverted check on autochanger in reservation system.
373 kes Tweak debug code in autochanger reservation.
375 kes Add some additional locking in the cats directory in subroutines
376 that modify packet variables called from batch insert.
377 kes Rework how dcrs are allocated. new_dcr() can now be called
378 with an existing pointer, and it will simply clean it up.
379 This allows the reservation system to test various different
380 devices, and will permit easy device changes.
381 kes A bunch of changes all over to handle new new_dcr() calling
383 kes Work more on the Volume management in the SD. Remember Volumes
384 for tape drives and for autochangers (even virtual disk changers).
385 kes When looking at the Volume list to reserve a drive, handle
386 autochanger names correctly by interating through the changer
387 devices. Also call the Director to see if a Volume is suitable
389 kes Fix some bugs in bscan. Make sure all media records are written.
390 Make sure that valid JobMedia records are written for disk files.
391 Previously they were completely wrong.
392 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
393 that the URLs don't change and so that the developers will all
394 work off the same copy. Rebuild from scrach.
395 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
399 kes Fix seg fault in FD from incorrect digest size.
400 kes Fix argument to non-OpenSSL crypto.c subroutine.
404 kes Remove a few malloc()s from the encryption code.
405 kes Use the class calls to bsock in filed/backup.c and restore.c in
406 place of the old bnet_xxx code.
407 kes Implement code that does an on the fly calculation of the
408 signing digest during restore of encrypted files. It makes
409 a best guess at the algorithm, and if it is not correct, will
410 then revert to the old code which reads the file after it is
412 kes Implement at least one missing crypto stream in stream_to_ascii()
413 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
414 #877 where a reload with bad syntax causes Dir to exit.
416 Cut: 2.1.14 beta (not released)
418 kes Do not free a volume on a tape drive until another volume is
419 mounted and read, or the autochanger unloads the volume.
420 This should help the SD re-use volumes that are already mounted,
421 and should fix bug #886.
422 kes Apply patch from user brettedgar that allows gnome2-console include
423 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
424 kes Apply patch from Lucien Weller that fixes day of week calculation
425 because of DST flag problem. Fixes bug #887.
427 kes Move find_next_appendable_volume() to after acquiring a valid device
428 in reserve.c. This fixes bug #864 -- confirmed by reporter.
430 kes Unable to reproduce bug 872. However added additional testing for
432 kes Bug #874 resolved by documenting SQLite limitations.
433 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
434 kes Bug #881 resolved by removing typo in mtx-changer script.
435 kes Made Frank Sweetser's wiki the official Bacula wiki with his
436 approval. Added a link to the wiki on the web page, and implemented
437 a backup from http://paramount.ind.wpi.edu
439 kes Fix update allfrompool to pass pool name.
441 kes Convert to pure GPL v2 license.
442 kes Fix sscanf problems reported by Peter Buschman that caused
443 a bus error on Solaris.
444 kes Rework (simplify) the select prompt in bat.
445 kes Move get_jobid_from_tid() into lib and create a
447 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
448 should definitely fix the problem of lost error messages in the
450 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
451 kes Eliminate tcpd.h from the project. Enclose the #include from the
452 library with extern C ...
453 kes Add print of signal name when a signal is trapped.
457 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
459 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
460 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
461 makes SQLit3 run 30 times faster, though a bit less safe.
462 kes Implement --with-batch-insert in configure and detection of thread
463 safe libraries. It is on by default, but turned off if no thread
464 safe library (e.g. SQLite 2) is available.
466 kes Fix Bacula PostgreSQL buffer overruns.
467 kes Do better checking for NULL results returned from PostgreSQL;
468 implement retry for failed queries; clear results buffer after
469 failed query. Hopefully this will correct the PostgreSQL failures.
471 kes Implement algorithm to handle only one appendable volume with
472 Prefer Mounted Volumes = no.
473 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
474 returned from a query.
475 kes Make volume lock recursive.
476 kes Implement an additional volume reservation algorithm that
477 starts by considering all reserved volumes then uses the
478 old brute force algorithm of searching the resources to
479 find a suitable device.
480 kes Add new reservations debug code and refine the old code.
481 kes Update the win32/dll/bacula.defs file.
483 kes Tweak reservations algorithm to permit a few more cases, i.e.
484 volume reserved, but on different drive, ...
485 kes Enhance SD status to include Pool and Media Type for drive in a
486 more readable format (a bit longer).
487 kes Fix PostgreSQL double free.
489 kes Minor refactoring of restore decryption code.
490 kes Add code to smartall.c to detect double free of a buffer.
492 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
493 so that bsmtp will create a correct email address (mailbox only).
494 kes Modify 'memory' command so that the buffers are listed as 'In use'
495 to avoid confusion with Orphaned buffers.
496 kes I reworked the OpenSSL include/lib flags to be handled in
497 the standard Bacula way, which should fix bug #863 concerning
498 non-standard OpenSSL libraries.
500 kes Implement Help Browser window for bat.
501 kes Fix reload bug that reset StorageId to zero.
503 kes Fix TLS #ifdefing when TLS turned off.
504 kes Ensure that when labelling a tape with Slot=0 that InChanger
506 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
508 kes Add StartTime to final uar_sel_jobid_temp query so that we can
509 add DISTINCT (required by PostgreSQL).
510 kes Implement BSOCK authenticate_director() method. Eventually will
511 authenicate all daemons.
512 kes Move several more functions into the BSOCK class.
514 kes Add code to tell the OS that we no longer need a cached
515 file that we were reading. In findlib/bfile.c. Also,
516 only cache files that we are reading. Thanks to
517 Tobias Oetiker <tobi@oetiker.ch> for the idea.
518 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
519 kes Implement script to automatically generate cats and dll .def
521 kes Update README.mingw32 to include new .def file generation.
522 kes Correct typo in UTF-8 error message as reported by:
523 jhernandez <julianhernandez@gmail.com>
524 kes Add additional sm_check() code on debug level 1.
525 kes Set default debug level to 1.
526 kes Trap SIGABRT in attempt to get traceback.
528 kes Reduce bat connect timeout from 30 to 15 seconds.
529 kes More restructuring and implementing BSOCK class in place of
531 kes Remove a few unnecessary malloc() tests in crypto code.
532 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
533 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
534 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
536 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
538 kes Fix Verify InitCatalog. The attributes were not pointing to the
539 correct saved location.
540 kes Implement message callback so that GUI is sure to get all
541 daemon messages. Currently displayed in a dialog in bat.
542 kes Ignore SIGUSR2 (Bacula timer) in bat.
543 kes Apply regress patch from bug #859 to allow regress to work
544 with Solaris compiler.
546 kes Begin adding TLS support to bat.
547 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
548 clean up lex.c and make it more readable.
550 kes Move more bnet functions into the BSOCK class.
551 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
552 kes Complete change of berrno strerror() method to bstrerror()
556 kes Cleanup incorrect email addresses in bsmtp.
557 kes Make bat display initial messages rather than discard them.
559 kes First cut of adding .mod to the run command.
560 kes Implement auto display of messages in bat.
561 kes Enhanced preferences to allow all Bacula output to be
564 kes Try to make bsmtp date routines more generic.
565 kes Fixed bug #856 autochanger documentation.
566 kes Rework bsmtp date editing for Win32. This fixes bug #854.
567 kes Add new cats entry point so Win32 builds.
569 kes Attempt to fix bsmtp date editing on OSes without %z editing.
571 kes Do better checking for the MySQL 64 bit libraries looking for both
572 .a and .so libraries.
573 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
574 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
575 kes Require the thread safe version of MySQL during configure. Thanks
576 to Andre Noll for pointing this out.
577 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
578 continuing in migration code.
579 kes Apply implementation of tray-monitor font derived from gnome-console
580 submitted by Andreas Piesk <a.piesk@gmx.net>
582 kes Eliminate important memory loss in SQLite
583 kes Fixed the batch insert MySQL thread specific data that was not
584 being freed. See cats/mysql.c:db_thread_cleanup().
585 kes Fix restore before command.
586 kes Convert old hdr.name to name() in a few places.
587 kes Implement update jobid command.
588 kes Return all time_t dates in db_get_job_record()
589 kes Stop watchdog in SD earlier.
590 kes Put Pool just after Storage in please mount message.
591 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
594 kes Update the po files.
595 kes Fix Verify InitCatalog by making it cache attributes.
597 kes Change name bacula-bat to bat for man 1 page to correspond to
599 kes Check for client and store NULL pointers in status command. This
601 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
602 kes Fix sign extended editing of %p.
603 kes Clean out a little old #ifdefing in cats/mysql.c
605 kes If time diff between DIR and FD is more than 600 seconds convert
606 INFO message to WARNING.
607 kes Implement heap size display in status for all daemons.
608 kes Attempt to fix MySQL db open memory loss (not successfull).
609 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
610 kes Eliminate memory loss in MySQL (possibly other SQLs) during
611 Query. This looks like a MySQL but but by doing extra releases,
612 the memory goes away. This should fix bug #847.
614 kes When backup fails, cancel SD before waiting for sd termination.
615 kes If SD is waiting for FD to connect during cancel, wake up the
617 kes Fix fsf code so that errno is correctly reported.
618 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
620 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
621 so that Bacula doesn't later stumble into a seg fault.
622 kes Use the term Restore Client in the restore Job report.
623 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
624 the original job's FileSetId.
625 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
626 spooling in migration jobs. Not yet tested.
627 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
628 reading conf file from a pipe. However, do it with open_bpipe()
629 rather than popen. Not yet tested.
631 kes Fix an ugly bug where the VolCatBytes were getting updated
633 kes Implement bconsole memory command that prints current memory
634 usage, plus smartalloc dump.
635 kes Clarify some error messages in backup, admin, and migrate.
636 kes Shrink label dialog to smaller size.
637 kes Invert Cancel OK buttons on restore to be OK Cancel.
638 kes More strerror() to bstrerror() conversions.
640 kes Start implementing bstrerror() in place of strerror().
641 kes Stripping path -- seems to work.
643 kes Prevent door and port files from being restored (mostly
645 kes Free an unreleased buffer in compat code.
646 kes Change console Job name from *Console* to -Console- to eliminate
647 Win32 filename problems. Put Win32 path separator when creating
648 Console file. This fixes bug #846.
649 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
651 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
653 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
654 to force Win32 error message.
656 kes First cut strip path. The data should be passed to the FD,
657 but nothing is done with it yet.
658 kes Enhance the digest and signature routines in the crypto
659 library to accept a JCR and to use it to print error messages
660 so that they will go in the Job report rather than the daemon's
662 kes Simplify some of the verify signature code.
663 kes Simplify a few of the alternative returns in the signature
666 ebl Use only POSIX regex instead of GNU regex in breg.c for
667 File relocation. It fix broken freebsd compilation.
668 kes Convert all other Dir files to use new ua class message
670 kes Tentative fix for missing digest signature in bug 807.
671 kes Correct handle problem in new win32_ftruncate routine.
672 kes Convert ua_purge.c and ua_update.c to use new ua class
673 message routines for bat.
675 kes Correct incorrect installation of LICENSE in Win32 installer.
676 kes Display LICENSE at the beginning of the Win32 install.
677 kes Attempt to correct the need for the png files to be installed
679 kes Reapply my bat.conf install script in qt-console. I think I
680 editted bat.pro instead of bat.pro.in and it was lost.
681 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
682 the /var/lock/subsys for subsysdir. Also corrects typos in the
685 kes First cut update job.
686 kes Correct configure to include qmake of src/qt-console directory.
688 kes Make restore job yes/mod/no print in one command so GUI works.
689 kes First cut implementing backup and restore client.
690 kes Correct editing in Verify output that caused a seg fault.
692 kes Insure that bat.conf is not overwritten during installation.
693 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
694 while I was implementing migration in March 2006 !
696 ebl Cleanup file relocation, using char *RegexWhere instead of
697 char *where + bool where_use_regexp
698 kes Update some manpages and add bat manpage.
699 kes Make a first cut at converting bacula.spec.in for bwx-console
701 kes Apply patch from John Goerzen to add hostname as fourth argument
702 to make_catalog_backup script.
703 kes Fix typos I introduced into bsmtp.c
704 kes Make pm_strxxx() routines handle input of NULL pointer. This
705 is to protect from NULL pointers returned from SQL databases.
706 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
707 kes Add more debug to FIFO code -- fix fifo regression test.
709 kes Implement posix_fadvise in FD, and for reading spool files in SD.
710 kes Add thread timer to bnet_connect() to break from OS if wait time
713 kes Update Win32 build to include new files, new symbols, and
715 kes Implement socket level heartbeat (tcp_keepidle)
716 ebl Commit File relocation patch
717 kes Make bat have 'make install' target.
718 kes Warn during install if old gnome-console binary found.
719 kes Warn during install if old wx-console binary found.
720 kes Add -8 option to bsmtp command line to add content type utf-8.
721 Fixes bug #809. (Character coding problem in bsmtp).
722 kes If < is found in target (from, to, cc) then do not enclose the
723 target in < > in bsmtp. Fixes bug #772 (malformed address).
724 kes When printing certain items in dbcheck, stop after 300000.
725 Fixes bug #822. (dbcheck loops).
726 kes Incorrect status in Dir after waiting for mount with poll set.
729 kes Extend idea of Prefer Mounted Volumes to mean a volume about
731 kes Print waiting to reserve a device every 5 mins.
733 kes Don't call close_part in label.c if tape and relabel.
734 kes Don't free volume if busy in close() -- should help with
736 ebl Fix #824 RunScript bug (After script could be execute twice)
737 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
738 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
739 Add a regression script to test RunScript
741 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
744 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
745 deprecated. No additional bugs will be fixed, and they will be dropped
746 in a future release (probably 2.4.0).
747 kes Change name of wx-console to bwx-console to make it more Bacula
749 kes Change the name of gnome-console to bgnome-console to make it
752 kes Some time in March, a Feature Request with patch from Jorj Bauer
753 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
755 The ability for the director to validate a Client (FD) CN against
756 an arbitrary set of patterns rather than the hostname, with
757 A new 'TLS Allowed CN' set of directives which are implemented
758 in the Client resource. Then pattern matching is used in place
759 of hostname matching against the Certificate's CN. As an example, we
760 have certificates which (a) use a local CA, and (b) have a CN of the
762 kes Add new/changed entry points to Win32 build
763 kes Create unaccepted-projects for projects that are not accepted.
764 kes Simplify locking in the reservations system.
765 kes Add more debug code in reservations.
766 kes Make sure error condition on reserving a volume is handled correctly.
767 kes Correct handling of volume_in_use.
768 kes Correct handling of initializing a device.
769 kes Move handling of broadcasting releasing a device into release_device().
770 kes Correct attaching dcr to dev so that it is only done if device
771 is properly initiated.
773 kes Locking debug level tweaks in SD.
774 kes Tweak new Volume code.
776 kes Add exec external-command [wait-seconds] to bconsole. This
777 executes the external-command. Note! normally external-command
778 should be enclosed in double quotes.
779 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
780 it should normally be off in a production system.
782 kes Implement die command for SD so that we can force it to dump.
783 kes Implement SD lock debug code.
784 kes Implement new algorithm for keeping Volume list in SD. It
785 is now owned by the device.
787 kes Implement new code for freeing in use volumes that should
788 resolve if not all, some of the problems of multiple drive
789 tape conflicts described in bug 801.
791 kes Fix gui/bacula-web/images files in svn.
792 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
794 ebl Fix a bug in batch mode (in string escape)
795 kes Correct migration prune SQL typo that crept in in a
798 kes Move bnet_despool() into class in bsock.c
799 kes Modify job report to include director name and Build OS.
800 kes Move drop root privilege and check_catalog() before fork.
801 kes Add update database scripts (version 9 to 10) to updatedb directory.
803 ebl Check size and age of each file after its backup to see if
804 it has changed during backup, if 'checkfilechanges' is set.
805 The FD will do an extra check (stat(2)) after
806 each file backup. mtime, ctime and size are compared with
807 'before backup' information. If time or size mismatch, an
808 error message will be generated. You must upgrade FD to use it.
810 kes Make database name and user configurable
811 --with-db-name=xxx --with-db-user=xxx
812 kes Add back database type to message.c for debugging.
814 kes Implement dir_sql() which issues an SQL query.
815 kes Modify bat medialist to use dir_sql() and do some minor C++
816 formatting as well as eliminating a number of pointers, simplifing
819 kes Fix some of the mtx-changer grep commands for tape label readers.
820 kes Convert a number of bsendmsg into the appropriate send/warning/error
822 kes Suppress the using database message in the .sql command.
823 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
825 kes Add context menu for floating a window.
826 kes Some minor cleanup and name changes in qt-console
827 kes Add doing mt setblk 0 in Win32 mtx-changer.
828 kes Apply Martin's bug fix to move definition of ENODATA for
830 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
833 kes More pruning cleanup.
834 kes Turn on wait_for_drive by default in mtx-changer.
835 kes Turn on Batch insert code by default as it now passes regression.
836 kes Add ./configure --enable-bat to enable building of Bat.
837 No install yet though.
839 kes Implement a new .sql command for bat.
840 kes Implement code to turn off pruning in obtaining the next volume.
841 Pruning is turned off for the status dir command, but turned on
842 for SD requests and for the list nextvolume command.
844 kes Correct Qmsg() that was not updated correctly when committing a
845 previous change (probably the recent TLS patch).
847 kes Write new subroutine is_volume_purged() that explicitly checks
848 if the Volume is purged, and if so marks it as such. This should
849 resolve problems reported about needing to mount twice to recycle
851 kes Rewrite pruning algorithm to do more work in the SQL engine, and
852 to pass a list of JobIds to be deleted to SQL. Also, minimize the
853 amount of duplicated code.
854 kes Do volume pruning only for the Media Type desired (reduces pruning time
855 if multiple Media Types are in the same pool).
856 kes Implement more detailed info in the Job report for the Bacula version
858 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
860 ebl Add bbatch tool to bench database and insert mode.
861 Fix sql quote stuff in batch mode
862 Fix sql stuff for mysql
864 kes Correct problems with am/pm scheduling. Fixes bug #808.
865 kes Implement new prunning code that prunes up to 1000 jobs at
866 the same time. The same technique can be applied to a number
867 of other prune/purge subroutines.
868 kes Add an insanity check when starting a new tape job to ensure
869 that the tape position has not been changed. If so fail the
871 kes Fix Win32 build for dlls to add the folllowing:
872 src/lib/bsock.c -- new file with new entry points
873 src/lib/dlist.c -- new entry points
874 src/cats/sql_create.c -- new entry point
875 src/cats/sql_cmds.c -- new DATA item exported
877 ebl batch mode cleanup bscan-test is ok now.
878 kes Implement SD code to check length of disk volume before appending.
880 kes Correct return status on db_batch... routines.
881 kes Add call to db_write_batch_file_records() to migration code.
882 ebl Fix AfterJob timing
883 kes Move the checking of the database in initializion of the Director
884 to after we drop privileges. This avoids the need for both root
885 and bacula access to the DB.
886 kes Correct a misplaced variable definition in src/filed/backup.c
887 kes Correct how the new batch insert db_create_attributes_record()
888 uses the arguments. Caused a seg fault in bscan.
889 kes Implement lock() and unlock() methods in DEVICE class.
890 Implement block() and set_block(xx) methods in DEVICE class.
891 kes Modify bnet_connect() so that it uses time() to check for the
892 wait time expiring (on some OSes, some system calls may not
894 kes Modify Verify to obtain the previous JobId when it is actually
895 running rather than at schedule time (as it was in 1.38.x).
896 kes Fix src/job.c to handle MaxWaitTime correctly. This should
898 kes When checking pid in pid file, continue running if the pid is
899 the same as ours. This occurs on IRIX after a system crash.
902 kes Extend new GUI API.
903 kes Make the ua structure a class, and implement send_msg(),
904 error_msg(), warning_msg(), and info_msg().
906 kes Apply fix from for building wx-console on the Mac from
908 kes Implement new select mechanism for GUI programs.
909 kes Reorganize initialization of stackedWidgets in bat.
911 kes Add updated nagios plugin supplied by Christian Masopust.
913 kes More bat implementation.
914 kes File migrate bug with Pool Occupancy using mediaid instead
915 of jobids. Fixes bug #795.
916 kes Fix orphaned buffers in filed backup and verify due to
917 crypto buffers not freed during errors. Fixes bug #789.
918 kes Extend new GUI api code to tree commands.
919 kes Ensure that tree and dot commands check console ACLs.
920 kes Permit marking directory with trailing slash.
921 kes Allow 20 console connections (instead of only 10).
923 kes Add smartctl call to bacula-sd.conf as an example of getting
926 kes Modify jobq.c to let simultaneous restore jobs run. This may
927 cause them to fail if they cannot get a drive.
928 kes Add Client Connect Wait to Storage daemon to permit users to
929 modify the time the SD waits for a FD connection.
931 kes Correct virtual changer check which was backwards. This caused
932 volumes to be unloaded into slots already occupied.
934 kes Apply Command ACL filter to JobId list in restore command.
935 kes Correct typeo in var.c patch.
937 kes Don't let Bacula prune File or Job records for the current Job.
938 kes Fix variable substitution pad + inc bug reported (with patch)
941 kes Correct SQLite log table index as reported by Luca Berra.
943 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
945 kes Begin implementing new comm signals for API.
946 kes Fix a few places in lib/message.c where the open fd may
948 kes Continue implementing lib/bsock.c (real class). Make jcr,
949 who, host, and port private. There are new methods to access
950 them for non-class use. This required touching a number of files.
952 kes Add LANG=C to autoconf/randpass so it works with languages other
953 than English. Fixes bug #788.
955 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
957 You will not be able to generate Include/Exclude list any more.
958 It will be fixed soon.
959 If you want to use this, you can apply
960 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
962 kes Restore of sockets created false error messages because Bacula
963 no longer restores sockets, but the code was still trying to
964 set the attributes on a non-existent file. Reported by a user.
965 ebl finish RecyclePool feature
966 Media will takes Pool.RecyclePool
967 when moving from Scratch to a Pool or when user will do
968 update volume=xxx frompool
969 To use it, add RecyclePool = aPool to your Pool resource
972 RecyclePool = Scratch
976 kes Expand new BSOCK class adding signal() and new BNET signals.
977 kes Begin enhancing the dot commands adding a new API function
978 that returns more information and will make it easier
979 to interface to the Director from a program.
981 kes Make DEVICE fd private. Its new name is m_fd, and can be
982 obtained with dev->fd() outside the class. This is the
983 first of many DEVICE members to be made private.
984 kes Implement Michael Renner's idea on having a virtual disk
985 changer. I made some minor modifications (e.g. I did not
986 implement the Virtual Changer directive, but simply set
987 the Changer Command to an empty string.
989 kes Implement a BSOCK send() method that writes the whole record
990 in a single write() request rather than in two.
991 ebl add update volume=xxx recyclepool=yyyy
992 volume takes recyclepool from pool when using update volume=xxx from pool
994 kes Fix encryption deblocking bug, which caused some restored files
995 to be truncated. This fixes bug #763.
996 kes Add FD event sequence order prepared by Eric -- for RunScripts.
997 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
999 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1000 ebl Use btime_t instead of uint64_t in media patch.
1002 kes Optimize the use of the database a bit in the Status dir command.
1003 Only open it when needed, ensure that if any previous database
1004 was opened, it is closed.
1006 kes Correct VolCatBytes bug from media patch.
1007 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1008 in the case of orphaned records.
1009 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1010 and File records in 300K chunks to be more efficient. This
1011 idea came from Juan Luis Frances (if I remember right).
1012 kes Apply Eric's scratch patch that moves a purged Volume to
1013 the RecyclePool. Question: how is RecyclePool set? what
1014 happens to the ScratchPool?
1015 kes Apply Eric's media patch that collects read/write media
1016 times as well as byte counts. This patch requires a
1017 simultaneous upgrade of the DIR and SD. Note, there
1018 should be some way to turn off timing. I'm not sure
1019 times are in Bacula units.
1020 kes Apply Eric's batch-insert patch.
1022 kes Update projects list.
1024 kes Implement Include/Exclude file lists in FD as dlists using
1025 the new dlistString class. This permits efficiently having
1026 large include/exclude lists and completes project Item 25.
1027 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1028 console is authorized to cancel the job. This fixes bug
1030 kes Modify SD so that the VolCatJobs medium record is updated
1031 at the beginning of a Job rather than the end. This
1032 fixes bug #775 where exceeding MaxVolJobs caused jobs
1034 kes Added a mutex around getting and setting Volume information
1035 so that multiple simultaneous jobs will single thread.
1037 Switch to using Subversion
1038 kes Remove src/pygtk-console/ from configure
1040 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1041 plus the entrypoints.
1042 kes Apply patch supplied that corrects debug print
1043 in canceling jobs for max run time. Supplied as
1044 part of bug #621, which was previously fixed.
1046 kes Test on job_canceled() and sd_msg_thread_done inside
1047 loop starting the message thread to avoid a race condition.
1049 kes Remove rl_catch_signal from console.c as it conflicted
1050 with the header definition. Fixes bug #765.
1051 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1053 kes Clarify some stored/acquire messages to indicate if the
1054 problem is with read or append.
1056 kes Fix memory leak with storage ids in cats/sql_get.c
1057 kes Terminate watchdog earlier to avoid reference to released
1058 memory -- reported by Jason Austin.
1059 kes Move closing the database from jobq.c to the director daemon
1060 termination routine. This fixes memory leaks for shadow jobs
1061 (i.e. migration jobs).
1062 kes Free up the unique jobid chain items in migrate.c. This fixes
1063 a memory leak problem.
1064 kes Convert some ugly looking for statements to use foreach_alist
1065 in findlib/find.c. This will facilitate converting the structures
1066 to use dlist (for large include/exclude lists).
1067 kes Fix a bug in the btree.c and btree.h routines, then rename them
1068 rblist and add them to be built in src/lib. Include some new
1069 methods written by Rudolf Cejka that make the code more readable
1070 (hides some of the ugly casting).
1071 kes Add set_next() and set_prev() methods which make the code much more
1072 readable. Also add a new dlistString class that facilitates storing
1073 strings in dlists. To be used in the large include/exclude lists.
1074 kes Make some trivial modifications to lib/tree.h that use rblist
1075 rather than dlist for storing the tree links. This was suggested
1076 by Rudolf Cejka. The result of this is that the restore tree now
1077 uses red-black binary trees rather than simple linked lists. This
1078 should give rather dramatic speed improvements for directories
1079 contining large numbers of directories/files (more than 10000).
1081 kes Fix maxruntime bug #621.
1083 ebl Implement the include JobID in spool file name project.
1084 kes Reorder projects file in order determined by Jan 2007 vote.
1085 kes Implement item #12 on project list -- quick release of FD by
1087 kes Fix open of SQLite3 db where user does not have write permission
1088 so that DIR does not crash. Fixes bug #761.
1090 kes Add back missing @ in Win32 Makefile.
1091 kes Change 'Device not configured to autolabel' from INFO
1093 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1094 which should restart an indefinite # of times.
1095 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1096 other DIR specifications.
1098 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1099 Fix path quoting in SQLite scripts.
1100 Fix problems with SHGetFolderPath.
1102 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1104 kes Fix Job restart on error bug that promotes an Inc to a Full
1105 backup. This should fix bug #755.
1106 kes Add qt-console and first cut of code.
1110 kes Fix Bacula->Documentation link on Win32 to point to index.html
1111 instead of bacula.html. Fixed bug #750.
1112 kes Return JobId in db_get_job_record() when JobId==0. This should
1114 kes Do not release source pointers when restarting a failed job.
1116 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1117 This *should* fix bug #747.
1118 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1121 kes Modify USTORE constructor to set an empty store_source string,
1122 and don't copy the store_source string in a cancel. Hopefully
1123 this will fix Arno's seg fault, bug #744.
1124 kes Add back code to disable conio in configure. Fixes bug #743.
1125 kes Correct the Options scanner in the FD to correctly handle
1126 SHA1 option, which was eating the next option. Reported by
1128 kes Add code to indicate when the SD is spooling, spool wait, and
1129 despooling as requested by Alan Brown.
1131 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob