1 Technical notes on version 2.3
5 kes Add JobId to all Dmsg() output.
6 kes Put some FD auth code on dbglvl rather than fixed.
7 kes Return insert attributes error message in db msg buffer to avoid
9 kes Separate batch init error messages.
10 kes Make SD code that contructs attribute insert check string lengths
12 kes If Dir gets an error during inserting attributes, cancel SD.
13 This reduces unnecessary error messages.
15 kes Correct search boolean for getting Volume info
16 ebl Cleanup batch code.
17 kes Back out one small change to the reservation system (reserving a volume).
18 kes Rework how a Volume is mounted. It is now much more intelligent and
19 will always attempt to use any mounted volume if possible and reduces
20 calls to the Director asking about volumes.
22 kes Turn off some code when batch insert not enabled.
23 kes Edit FD name in connect error messages.
24 kes Rework the reservation system to take into account that the Director
25 might give us a Volume that is different from the current one being
26 used, and to ensure that we don't exceed Maximum Volume Jobs.
27 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
28 fatal error with multiple jobs running'
29 kes Add more debug code in reservation system.
30 kes Implement maxvol-test to check bug #947.
32 kes Add code to handle tray monitor separated from Win32 FD.
33 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
35 kes Add missed return in fixing verify bug -- trunk only.
36 ebl Fix a command parser issue causing a director segfault.
37 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
39 kes Increase the max block size to 4MB fixes bug #957.
40 kes ERABT if user sets min block size > max block size. Fixes bug #956.
41 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
42 is not properly mounted (recognized) during a poll.
43 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
44 Job that has differences reports Verify OK.
45 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
47 ebl Add an option to operate on all pools with update vol parameters.
48 This complete the project 20. Patch from Nigel Stepp.
49 ebl Add history support to bconsole when using readline.
50 Using Ctrl-D to exit doesn't update .bconsole_history
51 kes Modify new volume algorithm to use max MediaId for generating next
52 volume number rather than the count of Volumes. This should essentially
53 eliminate the failure rate if some volumes were deleted. Bug #921.
54 kes Begin implemention of Optimize Job Scheduling.
55 kes Implement restore callback that Dirk and I agreed on for bat
56 restore. This fixes bug #928. Restore of backup of zero files fails.
57 kes Fix SQL Catalog logging which broke with new db_escape_string
60 kes Fix bacula_cats.def for new db_escape_string().
61 kes Increase size of name string when FD making connection to SD.
62 May fix bug #953. FD->SD connection failure.
64 kes Add code to help Dan debug 2drive-incremental-2disk test.
65 kes Add code to try to fix bug #908.
66 kes Add waits to multiple exit detection code to try to force pid
67 file to always be deleted.
68 kes Restore good dev.tar.gz to rescue set appropriate binary property.
70 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
71 trying to switch drives by checking for blocking before unblocking.
73 kes Cancel storage daemon in all cases where FD reports error. This
74 should fix virtually all cases of bug #920.
75 kes Fix db_escape_string() for MySQL which did not compile.
77 kes Fix error message that was clobbered when Dir tells SD it does not
78 have write permission on Volume. This should fix a minor point
79 in bug #942, but not the main problem.
80 kes Add code to cancel job in SD if FD connection fails. This should
82 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
83 dvl Pass jcr and db into db_escape_string() to enable better escaping
85 kes Fix migration code to get correct Volume name with multiple volumes
86 by skipping |. Fixes bug #936.
87 kes Implement patch supplied by Landon to fix bug #944 where using
88 TLS with bconsole uses 99+% of the CPU.
89 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
91 kes Move patches into patches directory.
93 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
96 ebl Using "m" in bconsole will show messages like before,
98 kes Fix bug #935, and probably also bug #903 where files were not
99 restored. MediaId was not properly set in JobMedia record after
102 kes Suppress chown and chmod error messages if the FD is not running
105 kes Apply Martin Simmons' patch that should turn off the new API usage
106 when batch insert is turned off allowing building on older
108 kes Add ./configure search in qwt-qt4 for qwt package
110 kes Bacula is now free of 3rd party GPL copyrighted code!
112 kes Add guid_to_name.c/h which replace idcache.
113 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
115 ebl Detect if new PosgreSQL batch insert API is present.
116 kes Correct incorrect mempool call causing Director crash. Occurs on
117 systems without va_copy().
118 sb Update spec files for 2.2.1 release
120 kes Fix memory pool call in ua_output.c. bug #934.
121 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
122 Add test program to fnmatch.c
124 kes Integrate patch to README.vc8 from
125 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
126 edit it to get it into Unix patch format.
127 kes Implement mkpath.c to replace old FSF makepath.c
129 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
131 Release Version 2.2.1
133 kes Update POTFILES.in
134 kes Cleanup a few underquoted AC_DEFUNs in configure
135 kes Apply patch from Martin Simmons that adds a test for va_copy to
138 kes Fix bug #921 by increasing the number of tries to create a new volume
140 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
141 can be called multiple times. Implement a version for machines
142 without va_copy() that gets a big buffer.
144 kes Integrate more portable zone offset code into bsmtp.c
145 Submitted by Attila Fülöp.
147 kes Fix bad SD->FD return status reported by
148 (James Harper) <james.harper@bendigoit.com.au>
149 ebl Fix a bug in read_close_session which return random status
150 thanks to James Harper
152 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
153 and directory names during restore of single file/directories.
154 kes Add sanity checks to .sql command when string is empty. Hopefully
155 that will resolve Dirks Director crash.
157 kes Apply patch submitted by Martin Simmons that corrects a seg fault
158 in the bsmtp chat subroutine when debug is >= 10.
160 kes Fix Director crash when running bat SQL queries.
161 kes Add David's notes on Item 8: Copy pools.
163 kes Rework projects file to be current and ready for a vote.
164 kes Enhance lex scanner error message.
166 kes Tweak LICENSE file to mention BSD code.
167 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
168 if specified on the ./configure.
169 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
170 This class is intended to allow us to open a second bsock to the
171 Director while in the restore subdialog.
173 kes Fix configure to create bat Makefile before creating dependencies.
174 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
175 kes Add a tooltip to the tray monitor.
176 dvl Set the Director's PID file before dropping privs. This fixes
179 kes Update AUTHORs file
180 kes Increase the default max concurrent jobs to 20 in FD and SD to
181 correspond with the default .conf files.
182 kes Rewrite the Win32 service routines. This eliminates the 3 copies
183 some different, of the same file created by RN when porting the
185 kes Rearrange some of the Win32 directories and the placement of the files
187 kes Set DEVELOPER flag in version.h
189 ========================================================================
190 Release Version 2.2.0
192 kes Apply a second doc patch from Marc.
193 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
194 improves the tips section that discusses how to setup multiple
197 kes Update bat README file.
198 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
199 corrects a typo in the Recycle status check in db_find_next_volume().
200 This will probably fix a number of annoying problems with multiple
202 kes Modify most of dird/msgchan.c to use bsock class calls rather than
203 bnet calls -- no functionality change.
205 kes Modify the Verify output to specify if files are missing on
206 the Volume(s) or disk. Fixes confusion in bug #916.
207 kes When more than one Volume is read in a migration job, the last
208 Volume bytes reported are from the last read volume rather than
209 the last written volume. Fixed. This fixes bug #910.
210 kes Fix display of Recycle flag after update volume=foo recycle=yes.
211 It previously printed New Recyle flag is: no. This fixes bug
214 kes Correct seg fault when switching tape drives during restore.
215 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
216 be used until after 2.2.0 release.
218 kes Remove fnmatch() in SD that permitted wild card specifications.
221 kes Fix %g in filename returned by SQL for browse tree reported by
223 kes Fix configure so that it puts config.out in the cwd rather than
225 kes Attempt to fix the locking problem reported by Eric in bug #906.
226 kes Make berrno class to leave errno unchanged after constructor call.
227 kes Make bnet_server use the heap rather than the stack to allocate
228 its socket fd pointers to avoid a crash at termination. Problem
229 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
231 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
232 and putting it in depkgs-qt along with Qt4.3.
234 kes Rework code in acquire.c that switches drives for reading when
235 the Media Type does not match. This should fix bug #906
237 ebl Fix a director segfault during job setup #907
238 kes Correct seg fault in postgresql when first operation returns no
239 rows. Fixes Dirks File browser problem seg fault with bat.
241 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
242 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
245 kes Implement PopUp YES/NO dialog for bat.
247 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
249 kes Correct RunScript to terminate job in FD on failure.
250 kes Change abort_on_error and AbortJobOnError to fail_on_error
251 and FailJobOnError in RunScripts.
252 kes Minor tweaks of code formating in RunScripts, principally to
253 avoid depassing 80 columns.
255 kes Eliminate one #ifdef Win32 in bsmtp
256 kes Implement grow tool to grow a file for testing very large databases.
257 kes Add big-vol-test to test Bacula seeking with > 5GB.
260 kes Modify find_next_volume() to return all values in Media record.
261 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
265 kes Update Release notes
267 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
268 Warning, in previous beta version, all media get from scratch keep their
271 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
272 This should fix bug #842. Made a note to look at removing the temp
273 files at the end of the install.
274 kes Add ability to mount and unmount a file device providing it is
275 marked as being removable and has the appropriate mount and unmount
276 commands defined in the Device resource. This fixes bug #830.
277 kes When applying a storage override, release all previous storage
278 definitions rather than just prepending the new storage.
279 This should prevent a good deal of confusion.
281 kes Implement ./configure search for qwt libraries.
283 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
284 Win32 FD. This should fix bug #893.
285 kes Remove an unnecessary beep in Win32 init code.
286 kes Update copyright dates in Win32 executable about boxes.
287 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
288 code with a BSD getopt.c and getopt.h.
289 kes Remove sched.h from the Win32 compat directory -- not used.
290 kes Remove the Exit menu item from the Win32 tray monitor. If you really
291 need to shut it down, do it through the services panel or the command
293 kes Remove some inappropriate Bacula FSFE copyrights.
294 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
295 kes Fix regress config non-portable test as pointed out by
296 Florian Heigl <florian.heigl@gmail.com>
297 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
298 as pointed out by Florian Heigl <florian.heigl@gmail.com>
300 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
301 Reported by Frank Sweetser.
305 kes Fix client-only build.
306 kes Integrate client-only fixes for bsys (initgroups) and conio from
307 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
308 kes Make arguments to get_scratch_volume() in same order as other
310 kes Rework the prune_volumes() subroutine so that after purging and
311 no volume found in desired pool, it will check for a scratch
312 volume. This prevents recycling the whole scratch pool.
313 kes Add code to status storage to print boffset_t (largefile support).
315 kes Move qwt (Graphics libarary for Qt4) to depkgs.
316 kes You now need a --with-qwt=<dir> to be able to build bat.
317 kes Update src/win32/cats/bacula_cats.def to include the new
318 db_get_query_dbids() call on Win32.
320 kes Correct a problem when selecting a scratch volume and moving
321 it to another pool that lost some columns.
322 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
323 kes Enhance Autochanger error messages to include Volume and device name.
324 kes Rework prune_volumes() code to take account of InChanger flag,
325 and to handle recycling volumes going to the Scratch pool and
326 current pool because the RecyclePool directive.
327 kes Implement a better and more efficient db_get_query_dbids() to
328 handle creating and passing back a list of DBIds.
332 kes Start work on new more efficient DBId subroutine. First use
333 will be for recycling volume to Scratch inchanger.
334 kes Increase number of JobIds in pruning from 1000 to 10000.
335 This to be replaced by above routine.
336 kes Begin implementation of building Qt4 on Win32.
337 kes Correct typo in fix I added for bad TLS shutdown.
338 kes Pull 2.0.3 patches into patches directory.
339 kes Update Release notes. Include qt-console in line count.
340 kes Update Projects file.
342 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
343 bug in migration code where a job that spanned two volumes
346 kes Implement new BST_DESPOOLING blocked state. Change from locking
347 during despooling in SD to blocking. This means that other threads
348 can work with the device structure, in particular the reservations
349 system while despooling.
351 kes Fix return in reservation message queue that missed clearing
352 the jcr lock (implemented 26Jun07 below).
353 kes Rename a number of dev methods to make locking function names
355 kes Document locking in lock.c. Move lock structures to new file
358 kes Move reservations message lock to lock jcr only this
360 kes Move main SD locking code into lock.c (new file).
361 kes Update Win32 build to include lock.c
365 kes Dirk committed the qwt library code for drawing graphs in bat.
366 kes Tweak install of qwt so that it is integrated with ./configure.
368 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
369 out by Eric (my typo).
370 ebl Fix configure.in to get batch mode enable
371 kes Return correct string from authenticate.cpp in bat when connecting
373 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
374 spurious line drops when using TLS.
375 kes Do not file reparse points when restoring a file that already
378 kes Implement Windows reparse points -- similar to directories, but
379 we do not descend into it. This is a first cut. They seem to
380 be backed up, but restore is not yet tested.
381 kes Remove restore_blocking in tls code when shutting a socket to leave
382 it in blocking mode. Hopefully this will fix the encryption bug
383 reported by Frank Sweetser.
384 kes When opening a file for backup, tell the OS that we are going to
385 read it sequentially -- optimization.
386 kes Change variable names in authenticate_director() to not conflict
387 with member names in bat. Caused great confusion with compiler,
390 kes Queue openssl error messages in case of comm problem.
391 kes Do shutdown() call if socket terminated.
392 kes Remove some duplicated code in tls.c
393 kes Move more of the bsock member variables into private and access
395 kes Add Frank Sweetser's tls-test to the regression suite.
397 kes Add Swedish sv.po file
399 kes Don't print clock skew message in FD if less than 3 seconds diff.
400 kes Add a bit of VSS info to status client.
401 kes Implement a first cut of Vista VSS, using Win2003 code.
405 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
406 loaded tape but uses first drive).
407 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
408 This was indeed a Win32 issue.
410 kes Simplify search of autochanger for in-use Volume.
411 kes Fix exit condition of check for in-use volume. kes Remove
412 inappropriate my_postgresql_free_result() in db_close()
414 kes Fix bad return in FD when encryption signature not found.
415 Probably caused a crash.
416 kes Inhibit missing encryption signature error messages for
417 file types where no signature computed.
418 kes Correct inverted check on autochanger in reservation system.
419 kes Tweak debug code in autochanger reservation.
421 kes Add some additional locking in the cats directory in subroutines
422 that modify packet variables called from batch insert.
423 kes Rework how dcrs are allocated. new_dcr() can now be called
424 with an existing pointer, and it will simply clean it up.
425 This allows the reservation system to test various different
426 devices, and will permit easy device changes.
427 kes A bunch of changes all over to handle new new_dcr() calling
429 kes Work more on the Volume management in the SD. Remember Volumes
430 for tape drives and for autochangers (even virtual disk changers).
431 kes When looking at the Volume list to reserve a drive, handle
432 autochanger names correctly by interating through the changer
433 devices. Also call the Director to see if a Volume is suitable
435 kes Fix some bugs in bscan. Make sure all media records are written.
436 Make sure that valid JobMedia records are written for disk files.
437 Previously they were completely wrong.
438 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
439 that the URLs don't change and so that the developers will all
440 work off the same copy. Rebuild from scrach.
441 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
445 kes Fix seg fault in FD from incorrect digest size.
446 kes Fix argument to non-OpenSSL crypto.c subroutine.
450 kes Remove a few malloc()s from the encryption code.
451 kes Use the class calls to bsock in filed/backup.c and restore.c in
452 place of the old bnet_xxx code.
453 kes Implement code that does an on the fly calculation of the
454 signing digest during restore of encrypted files. It makes
455 a best guess at the algorithm, and if it is not correct, will
456 then revert to the old code which reads the file after it is
458 kes Implement at least one missing crypto stream in stream_to_ascii()
459 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
460 #877 where a reload with bad syntax causes Dir to exit.
462 Cut: 2.1.14 beta (not released)
464 kes Do not free a volume on a tape drive until another volume is
465 mounted and read, or the autochanger unloads the volume.
466 This should help the SD re-use volumes that are already mounted,
467 and should fix bug #886.
468 kes Apply patch from user brettedgar that allows gnome2-console include
469 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
470 kes Apply patch from Lucien Weller that fixes day of week calculation
471 because of DST flag problem. Fixes bug #887.
473 kes Move find_next_appendable_volume() to after acquiring a valid device
474 in reserve.c. This fixes bug #864 -- confirmed by reporter.
476 kes Unable to reproduce bug 872. However added additional testing for
478 kes Bug #874 resolved by documenting SQLite limitations.
479 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
480 kes Bug #881 resolved by removing typo in mtx-changer script.
481 kes Made Frank Sweetser's wiki the official Bacula wiki with his
482 approval. Added a link to the wiki on the web page, and implemented
483 a backup from http://paramount.ind.wpi.edu
485 kes Fix update allfrompool to pass pool name.
487 kes Convert to pure GPL v2 license.
488 kes Fix sscanf problems reported by Peter Buschman that caused
489 a bus error on Solaris.
490 kes Rework (simplify) the select prompt in bat.
491 kes Move get_jobid_from_tid() into lib and create a
493 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
494 should definitely fix the problem of lost error messages in the
496 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
497 kes Eliminate tcpd.h from the project. Enclose the #include from the
498 library with extern C ...
499 kes Add print of signal name when a signal is trapped.
503 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
505 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
506 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
507 makes SQLit3 run 30 times faster, though a bit less safe.
508 kes Implement --with-batch-insert in configure and detection of thread
509 safe libraries. It is on by default, but turned off if no thread
510 safe library (e.g. SQLite 2) is available.
512 kes Fix Bacula PostgreSQL buffer overruns.
513 kes Do better checking for NULL results returned from PostgreSQL;
514 implement retry for failed queries; clear results buffer after
515 failed query. Hopefully this will correct the PostgreSQL failures.
517 kes Implement algorithm to handle only one appendable volume with
518 Prefer Mounted Volumes = no.
519 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
520 returned from a query.
521 kes Make volume lock recursive.
522 kes Implement an additional volume reservation algorithm that
523 starts by considering all reserved volumes then uses the
524 old brute force algorithm of searching the resources to
525 find a suitable device.
526 kes Add new reservations debug code and refine the old code.
527 kes Update the win32/dll/bacula.defs file.
529 kes Tweak reservations algorithm to permit a few more cases, i.e.
530 volume reserved, but on different drive, ...
531 kes Enhance SD status to include Pool and Media Type for drive in a
532 more readable format (a bit longer).
533 kes Fix PostgreSQL double free.
535 kes Minor refactoring of restore decryption code.
536 kes Add code to smartall.c to detect double free of a buffer.
538 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
539 so that bsmtp will create a correct email address (mailbox only).
540 kes Modify 'memory' command so that the buffers are listed as 'In use'
541 to avoid confusion with Orphaned buffers.
542 kes I reworked the OpenSSL include/lib flags to be handled in
543 the standard Bacula way, which should fix bug #863 concerning
544 non-standard OpenSSL libraries.
546 kes Implement Help Browser window for bat.
547 kes Fix reload bug that reset StorageId to zero.
549 kes Fix TLS #ifdefing when TLS turned off.
550 kes Ensure that when labelling a tape with Slot=0 that InChanger
552 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
554 kes Add StartTime to final uar_sel_jobid_temp query so that we can
555 add DISTINCT (required by PostgreSQL).
556 kes Implement BSOCK authenticate_director() method. Eventually will
557 authenicate all daemons.
558 kes Move several more functions into the BSOCK class.
560 kes Add code to tell the OS that we no longer need a cached
561 file that we were reading. In findlib/bfile.c. Also,
562 only cache files that we are reading. Thanks to
563 Tobias Oetiker <tobi@oetiker.ch> for the idea.
564 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
565 kes Implement script to automatically generate cats and dll .def
567 kes Update README.mingw32 to include new .def file generation.
568 kes Correct typo in UTF-8 error message as reported by:
569 jhernandez <julianhernandez@gmail.com>
570 kes Add additional sm_check() code on debug level 1.
571 kes Set default debug level to 1.
572 kes Trap SIGABRT in attempt to get traceback.
574 kes Reduce bat connect timeout from 30 to 15 seconds.
575 kes More restructuring and implementing BSOCK class in place of
577 kes Remove a few unnecessary malloc() tests in crypto code.
578 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
579 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
580 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
582 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
584 kes Fix Verify InitCatalog. The attributes were not pointing to the
585 correct saved location.
586 kes Implement message callback so that GUI is sure to get all
587 daemon messages. Currently displayed in a dialog in bat.
588 kes Ignore SIGUSR2 (Bacula timer) in bat.
589 kes Apply regress patch from bug #859 to allow regress to work
590 with Solaris compiler.
592 kes Begin adding TLS support to bat.
593 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
594 clean up lex.c and make it more readable.
596 kes Move more bnet functions into the BSOCK class.
597 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
598 kes Complete change of berrno strerror() method to bstrerror()
602 kes Cleanup incorrect email addresses in bsmtp.
603 kes Make bat display initial messages rather than discard them.
605 kes First cut of adding .mod to the run command.
606 kes Implement auto display of messages in bat.
607 kes Enhanced preferences to allow all Bacula output to be
610 kes Try to make bsmtp date routines more generic.
611 kes Fixed bug #856 autochanger documentation.
612 kes Rework bsmtp date editing for Win32. This fixes bug #854.
613 kes Add new cats entry point so Win32 builds.
615 kes Attempt to fix bsmtp date editing on OSes without %z editing.
617 kes Do better checking for the MySQL 64 bit libraries looking for both
618 .a and .so libraries.
619 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
620 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
621 kes Require the thread safe version of MySQL during configure. Thanks
622 to Andre Noll for pointing this out.
623 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
624 continuing in migration code.
625 kes Apply implementation of tray-monitor font derived from gnome-console
626 submitted by Andreas Piesk <a.piesk@gmx.net>
628 kes Eliminate important memory loss in SQLite
629 kes Fixed the batch insert MySQL thread specific data that was not
630 being freed. See cats/mysql.c:db_thread_cleanup().
631 kes Fix restore before command.
632 kes Convert old hdr.name to name() in a few places.
633 kes Implement update jobid command.
634 kes Return all time_t dates in db_get_job_record()
635 kes Stop watchdog in SD earlier.
636 kes Put Pool just after Storage in please mount message.
637 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
640 kes Update the po files.
641 kes Fix Verify InitCatalog by making it cache attributes.
643 kes Change name bacula-bat to bat for man 1 page to correspond to
645 kes Check for client and store NULL pointers in status command. This
647 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
648 kes Fix sign extended editing of %p.
649 kes Clean out a little old #ifdefing in cats/mysql.c
651 kes If time diff between DIR and FD is more than 600 seconds convert
652 INFO message to WARNING.
653 kes Implement heap size display in status for all daemons.
654 kes Attempt to fix MySQL db open memory loss (not successfull).
655 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
656 kes Eliminate memory loss in MySQL (possibly other SQLs) during
657 Query. This looks like a MySQL but but by doing extra releases,
658 the memory goes away. This should fix bug #847.
660 kes When backup fails, cancel SD before waiting for sd termination.
661 kes If SD is waiting for FD to connect during cancel, wake up the
663 kes Fix fsf code so that errno is correctly reported.
664 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
666 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
667 so that Bacula doesn't later stumble into a seg fault.
668 kes Use the term Restore Client in the restore Job report.
669 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
670 the original job's FileSetId.
671 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
672 spooling in migration jobs. Not yet tested.
673 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
674 reading conf file from a pipe. However, do it with open_bpipe()
675 rather than popen. Not yet tested.
677 kes Fix an ugly bug where the VolCatBytes were getting updated
679 kes Implement bconsole memory command that prints current memory
680 usage, plus smartalloc dump.
681 kes Clarify some error messages in backup, admin, and migrate.
682 kes Shrink label dialog to smaller size.
683 kes Invert Cancel OK buttons on restore to be OK Cancel.
684 kes More strerror() to bstrerror() conversions.
686 kes Start implementing bstrerror() in place of strerror().
687 kes Stripping path -- seems to work.
689 kes Prevent door and port files from being restored (mostly
691 kes Free an unreleased buffer in compat code.
692 kes Change console Job name from *Console* to -Console- to eliminate
693 Win32 filename problems. Put Win32 path separator when creating
694 Console file. This fixes bug #846.
695 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
697 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
699 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
700 to force Win32 error message.
702 kes First cut strip path. The data should be passed to the FD,
703 but nothing is done with it yet.
704 kes Enhance the digest and signature routines in the crypto
705 library to accept a JCR and to use it to print error messages
706 so that they will go in the Job report rather than the daemon's
708 kes Simplify some of the verify signature code.
709 kes Simplify a few of the alternative returns in the signature
712 ebl Use only POSIX regex instead of GNU regex in breg.c for
713 File relocation. It fix broken freebsd compilation.
714 kes Convert all other Dir files to use new ua class message
716 kes Tentative fix for missing digest signature in bug 807.
717 kes Correct handle problem in new win32_ftruncate routine.
718 kes Convert ua_purge.c and ua_update.c to use new ua class
719 message routines for bat.
721 kes Correct incorrect installation of LICENSE in Win32 installer.
722 kes Display LICENSE at the beginning of the Win32 install.
723 kes Attempt to correct the need for the png files to be installed
725 kes Reapply my bat.conf install script in qt-console. I think I
726 editted bat.pro instead of bat.pro.in and it was lost.
727 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
728 the /var/lock/subsys for subsysdir. Also corrects typos in the
731 kes First cut update job.
732 kes Correct configure to include qmake of src/qt-console directory.
734 kes Make restore job yes/mod/no print in one command so GUI works.
735 kes First cut implementing backup and restore client.
736 kes Correct editing in Verify output that caused a seg fault.
738 kes Insure that bat.conf is not overwritten during installation.
739 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
740 while I was implementing migration in March 2006 !
742 ebl Cleanup file relocation, using char *RegexWhere instead of
743 char *where + bool where_use_regexp
744 kes Update some manpages and add bat manpage.
745 kes Make a first cut at converting bacula.spec.in for bwx-console
747 kes Apply patch from John Goerzen to add hostname as fourth argument
748 to make_catalog_backup script.
749 kes Fix typos I introduced into bsmtp.c
750 kes Make pm_strxxx() routines handle input of NULL pointer. This
751 is to protect from NULL pointers returned from SQL databases.
752 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
753 kes Add more debug to FIFO code -- fix fifo regression test.
755 kes Implement posix_fadvise in FD, and for reading spool files in SD.
756 kes Add thread timer to bnet_connect() to break from OS if wait time
759 kes Update Win32 build to include new files, new symbols, and
761 kes Implement socket level heartbeat (tcp_keepidle)
762 ebl Commit File relocation patch
763 kes Make bat have 'make install' target.
764 kes Warn during install if old gnome-console binary found.
765 kes Warn during install if old wx-console binary found.
766 kes Add -8 option to bsmtp command line to add content type utf-8.
767 Fixes bug #809. (Character coding problem in bsmtp).
768 kes If < is found in target (from, to, cc) then do not enclose the
769 target in < > in bsmtp. Fixes bug #772 (malformed address).
770 kes When printing certain items in dbcheck, stop after 300000.
771 Fixes bug #822. (dbcheck loops).
772 kes Incorrect status in Dir after waiting for mount with poll set.
775 kes Extend idea of Prefer Mounted Volumes to mean a volume about
777 kes Print waiting to reserve a device every 5 mins.
779 kes Don't call close_part in label.c if tape and relabel.
780 kes Don't free volume if busy in close() -- should help with
782 ebl Fix #824 RunScript bug (After script could be execute twice)
783 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
784 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
785 Add a regression script to test RunScript
787 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
790 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
791 deprecated. No additional bugs will be fixed, and they will be dropped
792 in a future release (probably 2.4.0).
793 kes Change name of wx-console to bwx-console to make it more Bacula
795 kes Change the name of gnome-console to bgnome-console to make it
798 kes Some time in March, a Feature Request with patch from Jorj Bauer
799 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
801 The ability for the director to validate a Client (FD) CN against
802 an arbitrary set of patterns rather than the hostname, with
803 A new 'TLS Allowed CN' set of directives which are implemented
804 in the Client resource. Then pattern matching is used in place
805 of hostname matching against the Certificate's CN. As an example, we
806 have certificates which (a) use a local CA, and (b) have a CN of the
808 kes Add new/changed entry points to Win32 build
809 kes Create unaccepted-projects for projects that are not accepted.
810 kes Simplify locking in the reservations system.
811 kes Add more debug code in reservations.
812 kes Make sure error condition on reserving a volume is handled correctly.
813 kes Correct handling of volume_in_use.
814 kes Correct handling of initializing a device.
815 kes Move handling of broadcasting releasing a device into release_device().
816 kes Correct attaching dcr to dev so that it is only done if device
817 is properly initiated.
819 kes Locking debug level tweaks in SD.
820 kes Tweak new Volume code.
822 kes Add exec external-command [wait-seconds] to bconsole. This
823 executes the external-command. Note! normally external-command
824 should be enclosed in double quotes.
825 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
826 it should normally be off in a production system.
828 kes Implement die command for SD so that we can force it to dump.
829 kes Implement SD lock debug code.
830 kes Implement new algorithm for keeping Volume list in SD. It
831 is now owned by the device.
833 kes Implement new code for freeing in use volumes that should
834 resolve if not all, some of the problems of multiple drive
835 tape conflicts described in bug 801.
837 kes Fix gui/bacula-web/images files in svn.
838 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
840 ebl Fix a bug in batch mode (in string escape)
841 kes Correct migration prune SQL typo that crept in in a
844 kes Move bnet_despool() into class in bsock.c
845 kes Modify job report to include director name and Build OS.
846 kes Move drop root privilege and check_catalog() before fork.
847 kes Add update database scripts (version 9 to 10) to updatedb directory.
849 ebl Check size and age of each file after its backup to see if
850 it has changed during backup, if 'checkfilechanges' is set.
851 The FD will do an extra check (stat(2)) after
852 each file backup. mtime, ctime and size are compared with
853 'before backup' information. If time or size mismatch, an
854 error message will be generated. You must upgrade FD to use it.
856 kes Make database name and user configurable
857 --with-db-name=xxx --with-db-user=xxx
858 kes Add back database type to message.c for debugging.
860 kes Implement dir_sql() which issues an SQL query.
861 kes Modify bat medialist to use dir_sql() and do some minor C++
862 formatting as well as eliminating a number of pointers, simplifing
865 kes Fix some of the mtx-changer grep commands for tape label readers.
866 kes Convert a number of bsendmsg into the appropriate send/warning/error
868 kes Suppress the using database message in the .sql command.
869 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
871 kes Add context menu for floating a window.
872 kes Some minor cleanup and name changes in qt-console
873 kes Add doing mt setblk 0 in Win32 mtx-changer.
874 kes Apply Martin's bug fix to move definition of ENODATA for
876 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
879 kes More pruning cleanup.
880 kes Turn on wait_for_drive by default in mtx-changer.
881 kes Turn on Batch insert code by default as it now passes regression.
882 kes Add ./configure --enable-bat to enable building of Bat.
883 No install yet though.
885 kes Implement a new .sql command for bat.
886 kes Implement code to turn off pruning in obtaining the next volume.
887 Pruning is turned off for the status dir command, but turned on
888 for SD requests and for the list nextvolume command.
890 kes Correct Qmsg() that was not updated correctly when committing a
891 previous change (probably the recent TLS patch).
893 kes Write new subroutine is_volume_purged() that explicitly checks
894 if the Volume is purged, and if so marks it as such. This should
895 resolve problems reported about needing to mount twice to recycle
897 kes Rewrite pruning algorithm to do more work in the SQL engine, and
898 to pass a list of JobIds to be deleted to SQL. Also, minimize the
899 amount of duplicated code.
900 kes Do volume pruning only for the Media Type desired (reduces pruning time
901 if multiple Media Types are in the same pool).
902 kes Implement more detailed info in the Job report for the Bacula version
904 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
906 ebl Add bbatch tool to bench database and insert mode.
907 Fix sql quote stuff in batch mode
908 Fix sql stuff for mysql
910 kes Correct problems with am/pm scheduling. Fixes bug #808.
911 kes Implement new prunning code that prunes up to 1000 jobs at
912 the same time. The same technique can be applied to a number
913 of other prune/purge subroutines.
914 kes Add an insanity check when starting a new tape job to ensure
915 that the tape position has not been changed. If so fail the
917 kes Fix Win32 build for dlls to add the folllowing:
918 src/lib/bsock.c -- new file with new entry points
919 src/lib/dlist.c -- new entry points
920 src/cats/sql_create.c -- new entry point
921 src/cats/sql_cmds.c -- new DATA item exported
923 ebl batch mode cleanup bscan-test is ok now.
924 kes Implement SD code to check length of disk volume before appending.
926 kes Correct return status on db_batch... routines.
927 kes Add call to db_write_batch_file_records() to migration code.
928 ebl Fix AfterJob timing
929 kes Move the checking of the database in initializion of the Director
930 to after we drop privileges. This avoids the need for both root
931 and bacula access to the DB.
932 kes Correct a misplaced variable definition in src/filed/backup.c
933 kes Correct how the new batch insert db_create_attributes_record()
934 uses the arguments. Caused a seg fault in bscan.
935 kes Implement lock() and unlock() methods in DEVICE class.
936 Implement block() and set_block(xx) methods in DEVICE class.
937 kes Modify bnet_connect() so that it uses time() to check for the
938 wait time expiring (on some OSes, some system calls may not
940 kes Modify Verify to obtain the previous JobId when it is actually
941 running rather than at schedule time (as it was in 1.38.x).
942 kes Fix src/job.c to handle MaxWaitTime correctly. This should
944 kes When checking pid in pid file, continue running if the pid is
945 the same as ours. This occurs on IRIX after a system crash.
948 kes Extend new GUI API.
949 kes Make the ua structure a class, and implement send_msg(),
950 error_msg(), warning_msg(), and info_msg().
952 kes Apply fix from for building wx-console on the Mac from
954 kes Implement new select mechanism for GUI programs.
955 kes Reorganize initialization of stackedWidgets in bat.
957 kes Add updated nagios plugin supplied by Christian Masopust.
959 kes More bat implementation.
960 kes File migrate bug with Pool Occupancy using mediaid instead
961 of jobids. Fixes bug #795.
962 kes Fix orphaned buffers in filed backup and verify due to
963 crypto buffers not freed during errors. Fixes bug #789.
964 kes Extend new GUI api code to tree commands.
965 kes Ensure that tree and dot commands check console ACLs.
966 kes Permit marking directory with trailing slash.
967 kes Allow 20 console connections (instead of only 10).
969 kes Add smartctl call to bacula-sd.conf as an example of getting
972 kes Modify jobq.c to let simultaneous restore jobs run. This may
973 cause them to fail if they cannot get a drive.
974 kes Add Client Connect Wait to Storage daemon to permit users to
975 modify the time the SD waits for a FD connection.
977 kes Correct virtual changer check which was backwards. This caused
978 volumes to be unloaded into slots already occupied.
980 kes Apply Command ACL filter to JobId list in restore command.
981 kes Correct typeo in var.c patch.
983 kes Don't let Bacula prune File or Job records for the current Job.
984 kes Fix variable substitution pad + inc bug reported (with patch)
987 kes Correct SQLite log table index as reported by Luca Berra.
989 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
991 kes Begin implementing new comm signals for API.
992 kes Fix a few places in lib/message.c where the open fd may
994 kes Continue implementing lib/bsock.c (real class). Make jcr,
995 who, host, and port private. There are new methods to access
996 them for non-class use. This required touching a number of files.
998 kes Add LANG=C to autoconf/randpass so it works with languages other
999 than English. Fixes bug #788.
1001 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1003 You will not be able to generate Include/Exclude list any more.
1004 It will be fixed soon.
1005 If you want to use this, you can apply
1006 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1008 kes Restore of sockets created false error messages because Bacula
1009 no longer restores sockets, but the code was still trying to
1010 set the attributes on a non-existent file. Reported by a user.
1011 ebl finish RecyclePool feature
1012 Media will takes Pool.RecyclePool
1013 when moving from Scratch to a Pool or when user will do
1014 update volume=xxx frompool
1015 To use it, add RecyclePool = aPool to your Pool resource
1018 RecyclePool = Scratch
1022 kes Expand new BSOCK class adding signal() and new BNET signals.
1023 kes Begin enhancing the dot commands adding a new API function
1024 that returns more information and will make it easier
1025 to interface to the Director from a program.
1027 kes Make DEVICE fd private. Its new name is m_fd, and can be
1028 obtained with dev->fd() outside the class. This is the
1029 first of many DEVICE members to be made private.
1030 kes Implement Michael Renner's idea on having a virtual disk
1031 changer. I made some minor modifications (e.g. I did not
1032 implement the Virtual Changer directive, but simply set
1033 the Changer Command to an empty string.
1035 kes Implement a BSOCK send() method that writes the whole record
1036 in a single write() request rather than in two.
1037 ebl add update volume=xxx recyclepool=yyyy
1038 volume takes recyclepool from pool when using update volume=xxx from pool
1040 kes Fix encryption deblocking bug, which caused some restored files
1041 to be truncated. This fixes bug #763.
1042 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1043 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1045 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1046 ebl Use btime_t instead of uint64_t in media patch.
1048 kes Optimize the use of the database a bit in the Status dir command.
1049 Only open it when needed, ensure that if any previous database
1050 was opened, it is closed.
1052 kes Correct VolCatBytes bug from media patch.
1053 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1054 in the case of orphaned records.
1055 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1056 and File records in 300K chunks to be more efficient. This
1057 idea came from Juan Luis Frances (if I remember right).
1058 kes Apply Eric's scratch patch that moves a purged Volume to
1059 the RecyclePool. Question: how is RecyclePool set? what
1060 happens to the ScratchPool?
1061 kes Apply Eric's media patch that collects read/write media
1062 times as well as byte counts. This patch requires a
1063 simultaneous upgrade of the DIR and SD. Note, there
1064 should be some way to turn off timing. I'm not sure
1065 times are in Bacula units.
1066 kes Apply Eric's batch-insert patch.
1068 kes Update projects list.
1070 kes Implement Include/Exclude file lists in FD as dlists using
1071 the new dlistString class. This permits efficiently having
1072 large include/exclude lists and completes project Item 25.
1073 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1074 console is authorized to cancel the job. This fixes bug
1076 kes Modify SD so that the VolCatJobs medium record is updated
1077 at the beginning of a Job rather than the end. This
1078 fixes bug #775 where exceeding MaxVolJobs caused jobs
1080 kes Added a mutex around getting and setting Volume information
1081 so that multiple simultaneous jobs will single thread.
1083 Switch to using Subversion
1084 kes Remove src/pygtk-console/ from configure
1086 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1087 plus the entrypoints.
1088 kes Apply patch supplied that corrects debug print
1089 in canceling jobs for max run time. Supplied as
1090 part of bug #621, which was previously fixed.
1092 kes Test on job_canceled() and sd_msg_thread_done inside
1093 loop starting the message thread to avoid a race condition.
1095 kes Remove rl_catch_signal from console.c as it conflicted
1096 with the header definition. Fixes bug #765.
1097 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1099 kes Clarify some stored/acquire messages to indicate if the
1100 problem is with read or append.
1102 kes Fix memory leak with storage ids in cats/sql_get.c
1103 kes Terminate watchdog earlier to avoid reference to released
1104 memory -- reported by Jason Austin.
1105 kes Move closing the database from jobq.c to the director daemon
1106 termination routine. This fixes memory leaks for shadow jobs
1107 (i.e. migration jobs).
1108 kes Free up the unique jobid chain items in migrate.c. This fixes
1109 a memory leak problem.
1110 kes Convert some ugly looking for statements to use foreach_alist
1111 in findlib/find.c. This will facilitate converting the structures
1112 to use dlist (for large include/exclude lists).
1113 kes Fix a bug in the btree.c and btree.h routines, then rename them
1114 rblist and add them to be built in src/lib. Include some new
1115 methods written by Rudolf Cejka that make the code more readable
1116 (hides some of the ugly casting).
1117 kes Add set_next() and set_prev() methods which make the code much more
1118 readable. Also add a new dlistString class that facilitates storing
1119 strings in dlists. To be used in the large include/exclude lists.
1120 kes Make some trivial modifications to lib/tree.h that use rblist
1121 rather than dlist for storing the tree links. This was suggested
1122 by Rudolf Cejka. The result of this is that the restore tree now
1123 uses red-black binary trees rather than simple linked lists. This
1124 should give rather dramatic speed improvements for directories
1125 contining large numbers of directories/files (more than 10000).
1127 kes Fix maxruntime bug #621.
1129 ebl Implement the include JobID in spool file name project.
1130 kes Reorder projects file in order determined by Jan 2007 vote.
1131 kes Implement item #12 on project list -- quick release of FD by
1133 kes Fix open of SQLite3 db where user does not have write permission
1134 so that DIR does not crash. Fixes bug #761.
1136 kes Add back missing @ in Win32 Makefile.
1137 kes Change 'Device not configured to autolabel' from INFO
1139 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1140 which should restart an indefinite # of times.
1141 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1142 other DIR specifications.
1144 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1145 Fix path quoting in SQLite scripts.
1146 Fix problems with SHGetFolderPath.
1148 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1150 kes Fix Job restart on error bug that promotes an Inc to a Full
1151 backup. This should fix bug #755.
1152 kes Add qt-console and first cut of code.
1156 kes Fix Bacula->Documentation link on Win32 to point to index.html
1157 instead of bacula.html. Fixed bug #750.
1158 kes Return JobId in db_get_job_record() when JobId==0. This should
1160 kes Do not release source pointers when restarting a failed job.
1162 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1163 This *should* fix bug #747.
1164 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1167 kes Modify USTORE constructor to set an empty store_source string,
1168 and don't copy the store_source string in a cancel. Hopefully
1169 this will fix Arno's seg fault, bug #744.
1170 kes Add back code to disable conio in configure. Fixes bug #743.
1171 kes Correct the Options scanner in the FD to correctly handle
1172 SHA1 option, which was eating the next option. Reported by
1174 kes Add code to indicate when the SD is spooling, spool wait, and
1175 despooling as requested by Alan Brown.
1177 Version 2.0.0 released: 4 January 2007