1 Technical notes on version 2.3
5 kes Add new include to cats/postgresql.c suggested by Marc Cousins so
6 that it compiles correctly with pgre version 8.3.
8 kes Fix --archivedir addition to configure. Replace it with
9 --with-archivedir in configure.in This fixes the regression
11 kes This patch fixes bug #1012 where the job is canceled because
12 of Max Run Time exceeded when the job has not yet started.
14 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
15 one 'part' to write. Instead of each part being stored on disk,
16 written to DVD, then deleted from disk, all parts are written to disk,
17 and only the last is written and deleted from disk.
18 kes This patch fixes the status command to include the formating string for
19 JS_AttrInsterting. It fixes bug #1021.
20 kes This patch should fix the Mac OS X build problem on the latest
21 Darwin, where sys/types.h was not included correctly (apparently
22 due to a change in the Mac headers). The solution was to explicitly
23 ensure that it is defined for the ./configure.
24 This patch also has a rebuild of configure that includes the Debian
25 qt4 kludge (look for alternate qt4 names).
26 This patch fixes bug #1020.
27 kes This patch should ensure that queued messages to the console are
28 displayed as soon as possible. It should fix bug 1007, but has been
31 kes This patch fixes the infinite loop when trying to increase the
32 maximum number of volumes in a Pool during the add command.
33 This patch fixes bug #1008.
37 db Remove extra data on estimate command in joblist for bat.
39 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
40 really change anything, but is the beginning of doing it *right*.
41 To do it completely right the LastWritten date must be passed to
42 the SD, but it is not yet done.
43 kes Minor tweaks to some bat restore SQL.
44 kes This patch fixes bug #1003 where putting the message output from
45 a Verify job into the catalog results in a recursive loop. The problem
46 seems to show up only with postgresql (to be verified).
47 kes Correct %x to %p in postgresql debug statement.
49 kes Fix bug #942 where lots of emails where generated when the heartbeat
50 interval was low and Bacula wanted a different tape from the one in
53 ebl Add new SD despooling attributes and Dir inserting attributes
54 job status codes in the catalog (Status table).
56 ebl Use qmake-qt4 instead of qmake when available (debian system).
58 kes Add a security warning to src/cats/make_catalog_backup.in indicating
59 that passing the password via the command line (arg 3) is insecure.
60 This responds to bug #990 (it doesn't fix it).
62 kes Set default debug_level to zero. This corrects bugs #991 and #993.
63 kes Fix a crash in bat when it cannot connect to the Director for example
64 if the Director is not running.
65 kes Remove redundant INDEX (JobId) from File table in the trunk.
67 kes Make explicit exception to GPL in LICENSE to permit linking
68 the Win32 FD with Microsoft VSS code.
69 kes Apply the Solaris package patch from
70 Masopust, Christian <christian.masopust@siemens.com>
71 kes Apply the patch to optionally add a timestamp in the debug output
72 submitted by Mariusz Czulada <manieq@wp.eu>.
74 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
75 backend (sql_strerror). Fixes bug #989
77 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
78 It applied with no problems.
79 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
81 kes Redirect stderror to stdin on mt status command in mtx-changer.in
82 since the status is returned on stderr on Solaris.
83 kes Activate Close button on tray-monitor window. This fixes
85 kes Check for NULL item in parse_conf.c before calling it. In the
86 case of Device, there is no item and this caused a seg fault when
87 Device appears in the conf file.
88 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
89 avoids pulling in config.h multiple times in some new code.
91 kes Fix spurious warning message printed when creating a volume with
92 a LabelFormat. This fixes bug #976.
96 kes Add JobId in place of Job name in all the Jmsg() output.
97 kes Correct the APP_DESC for the Win32 storage service (remove an e).
99 kes Make maxvol-test and new more strict maxvol2-test work.
100 kes Print JobId in all Jmsg() job output.
102 kes Add new SD despooling attributes and Dir inserting attributes
103 job status codes. This fixes bug 961.
104 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
106 kes Fix doc issue. This fixes bug #963.
107 kes Fix listing performance problems in bat. Pointed out by
109 kes Remove old debug code.
110 kes Fix bat code that tests for Win32. This should fix bug #968
111 kes Query 5 list wrong Vol after migration. This fixes bug #960
113 ebl Fix #969 where user can't change Replace option in restore menu.
115 kes Save jcr in thread specific data (tsd) for each thread.
116 kes Make Dmsg() print JobId as -%u.
117 kes Make Jmsg, Emsg, and others automatically pickup the jobid
118 for the thread if it exists.
119 kes Remove old reservation debug jid code.
120 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
121 ebl Add an option that permit to specify spool size in job
122 definition. (Applying patches/testing/spoolsize_per_job.patch).
123 You must upgrade SD and DIR at the same time.
124 dvl Add new configuration item --archivedir
125 dvl Adjust regression tests to use tmp not /tmp. This will allow
126 multiple concurrent runs of the regression tests.
128 kes Fix race condition that drops final block written to volume.
129 This happens in rare cases with multiple simultaneous jobs
130 when the Volume fills. This fixes bug #964. May be related
131 to bug #935 and possibly #903.
132 kes Eliminate more strerror() and replace with bstrerror().
133 kes Remove BSD getopt and replace with unrestricted IBM version.
134 kes Fix Win32 build for changed calling sequences.
135 kes More tweaks to the mount volume routines to get everything
136 right. Changed variable name from find to have_vol, which is
137 much easier to understand.
138 kes Enhance btimer debug code.
140 kes Fix FD->SD authorization failure, which was due to spurious
141 wakeups from a pthread_cond_timedwait(). Simply check the
142 predicate before continuing. This fixes bug #953.
143 kes Add const char where needed (more to do). Remove temp debug code.
145 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
146 kes Don't overwrite error message in check_tables_version.
148 kes Unlock batch insert tables with same calls used elsewhere.
149 kes Allow starting 59 jobs a second.
150 kes Make SD session key more random.
151 kes Add retry for SQLite opening db if it fails. Probably helps
153 kes Suppress extra error messages during batch insert failure.
155 kes Add jcr to timer packets so if killed message can be sent to job.
156 kes Add JobId to all Dmsg() output.
157 kes Put some FD auth code on dbglvl rather than fixed.
158 kes Return insert attributes error message in db msg buffer to avoid
159 false error messages. Helps fix bug #966.
160 kes Separate batch init error messages. Probably helps fix bug #966.
161 kes Make SD code that contructs attribute insert check string lengths
163 kes If Dir gets an error during inserting attributes, cancel SD.
164 This reduces unnecessary error messages.
166 kes Correct search boolean for getting Volume info
167 ebl Cleanup batch insert code. Probably fixes bug #965.
168 kes Back out one small change to the reservation system (reserving a volume).
169 kes Rework how a Volume is mounted. It is now much more intelligent and
170 will always attempt to use any mounted volume if possible and reduces
171 calls to the Director asking about volumes.
173 kes Turn off some code when batch insert not enabled.
174 kes Edit FD name in connect error messages.
175 kes Rework the reservation system to take into account that the Director
176 might give us a Volume that is different from the current one being
177 used, and to ensure that we don't exceed Maximum Volume Jobs.
178 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
179 fatal error with multiple jobs running'
180 kes Add more debug code in reservation system.
181 kes Implement maxvol-test to check bug #947.
183 kes Add code to handle tray monitor separated from Win32 FD.
184 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
186 kes Add missed return in fixing verify bug -- trunk only.
187 ebl Fix a command parser issue causing a director segfault.
188 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
190 kes Increase the max block size to 4MB fixes bug #957.
191 kes ERABT if user sets min block size > max block size. Fixes bug #956.
192 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
193 is not properly mounted (recognized) during a poll.
194 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
195 Job that has differences reports Verify OK.
196 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
198 ebl Add an option to operate on all pools with update vol parameters.
199 This complete the project 20. Patch from Nigel Stepp.
200 ebl Add history support to bconsole when using readline.
201 Using Ctrl-D to exit doesn't update .bconsole_history
202 kes Modify new volume algorithm to use max MediaId for generating next
203 volume number rather than the count of Volumes. This should essentially
204 eliminate the failure rate if some volumes were deleted. Bug #921.
205 kes Begin implemention of Optimize Job Scheduling.
206 kes Implement restore callback that Dirk and I agreed on for bat
207 restore. This fixes bug #928. Restore of backup of zero files fails.
208 kes Fix SQL Catalog logging which broke with new db_escape_string
211 Release Version 2.2.4
213 kes Fix bacula_cats.def for new db_escape_string().
214 kes Increase size of name string when FD making connection to SD.
215 May fix bug #953. FD->SD connection failure.
217 kes Add code to help Dan debug 2drive-incremental-2disk test.
218 kes Add code to try to fix bug #908.
219 kes Add waits to multiple exit detection code to try to force pid
220 file to always be deleted.
221 kes Restore good dev.tar.gz to rescue set appropriate binary property.
223 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
224 trying to switch drives by checking for blocking before unblocking.
226 kes Cancel storage daemon in all cases where FD reports error. This
227 should fix virtually all cases of bug #920.
228 kes Fix db_escape_string() for MySQL which did not compile.
230 kes Fix error message that was clobbered when Dir tells SD it does not
231 have write permission on Volume. This should fix a minor point
232 in bug #942, but not the main problem.
233 kes Add code to cancel job in SD if FD connection fails. This should
235 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
236 dvl Pass jcr and db into db_escape_string() to enable better escaping
238 kes Fix migration code to get correct Volume name with multiple volumes
239 by skipping |. Fixes bug #936.
240 kes Implement patch supplied by Landon to fix bug #944 where using
241 TLS with bconsole uses 99+% of the CPU.
242 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
244 kes Move patches into patches directory.
246 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
249 ebl Using 'm' in bconsole will show messages like before,
250 and not memory usage.
251 kes Fix bug #935, and probably also bug #903 where files were not
252 restored. MediaId was not properly set in JobMedia record after
255 kes Suppress chown and chmod error messages if the FD is not running
258 kes Apply Martin Simmons' patch that should turn off the new API usage
259 when batch insert is turned off allowing building on older
261 kes Add ./configure search in qwt-qt4 for qwt package
263 kes Bacula is now free of 3rd party GPL copyrighted code!
265 kes Add guid_to_name.c/h which replace idcache.
266 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
268 ebl Detect if new PosgreSQL batch insert API is present.
269 kes Correct incorrect mempool call causing Director crash. Occurs on
270 systems without va_copy().
271 sb Update spec files for 2.2.1 release
273 kes Fix memory pool call in ua_output.c. bug #934.
274 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
275 Add test program to fnmatch.c
277 kes Integrate patch to README.vc8 from
278 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
279 edit it to get it into Unix patch format.
280 kes Implement mkpath.c to replace old FSF makepath.c
282 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
284 Release Version 2.2.1
286 kes Update POTFILES.in
287 kes Cleanup a few underquoted AC_DEFUNs in configure
288 kes Apply patch from Martin Simmons that adds a test for va_copy to
291 kes Fix bug #921 by increasing the number of tries to create a new volume
293 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
294 can be called multiple times. Implement a version for machines
295 without va_copy() that gets a big buffer.
297 kes Integrate more portable zone offset code into bsmtp.c
298 Submitted by Attila Fülöp.
300 kes Fix bad SD->FD return status reported by
301 (James Harper) <james.harper@bendigoit.com.au>
302 ebl Fix a bug in read_close_session which return random status
303 thanks to James Harper
305 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
306 and directory names during restore of single file/directories.
307 kes Add sanity checks to .sql command when string is empty. Hopefully
308 that will resolve Dirks Director crash.
310 kes Apply patch submitted by Martin Simmons that corrects a seg fault
311 in the bsmtp chat subroutine when debug is >= 10.
313 kes Fix Director crash when running bat SQL queries.
314 kes Add David's notes on Item 8: Copy pools.
316 kes Rework projects file to be current and ready for a vote.
317 kes Enhance lex scanner error message.
319 kes Tweak LICENSE file to mention BSD code.
320 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
321 if specified on the ./configure.
322 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
323 This class is intended to allow us to open a second bsock to the
324 Director while in the restore subdialog.
326 kes Fix configure to create bat Makefile before creating dependencies.
327 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
328 kes Add a tooltip to the tray monitor.
329 dvl Set the Director's PID file before dropping privs. This fixes
332 kes Update AUTHORs file
333 kes Increase the default max concurrent jobs to 20 in FD and SD to
334 correspond with the default .conf files.
335 kes Rewrite the Win32 service routines. This eliminates the 3 copies
336 some different, of the same file created by RN when porting the
338 kes Rearrange some of the Win32 directories and the placement of the files
340 kes Set DEVELOPER flag in version.h
342 ========================================================================
343 Release Version 2.2.0
345 kes Apply a second doc patch from Marc.
346 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
347 improves the tips section that discusses how to setup multiple
350 kes Update bat README file.
351 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
352 corrects a typo in the Recycle status check in db_find_next_volume().
353 This will probably fix a number of annoying problems with multiple
355 kes Modify most of dird/msgchan.c to use bsock class calls rather than
356 bnet calls -- no functionality change.
358 kes Modify the Verify output to specify if files are missing on
359 the Volume(s) or disk. Fixes confusion in bug #916.
360 kes When more than one Volume is read in a migration job, the last
361 Volume bytes reported are from the last read volume rather than
362 the last written volume. Fixed. This fixes bug #910.
363 kes Fix display of Recycle flag after update volume=foo recycle=yes.
364 It previously printed New Recyle flag is: no. This fixes bug
367 kes Correct seg fault when switching tape drives during restore.
368 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
369 be used until after 2.2.0 release.
371 kes Remove fnmatch() in SD that permitted wild card specifications.
374 kes Fix %g in filename returned by SQL for browse tree reported by
376 kes Fix configure so that it puts config.out in the cwd rather than
378 kes Attempt to fix the locking problem reported by Eric in bug #906.
379 kes Make berrno class to leave errno unchanged after constructor call.
380 kes Make bnet_server use the heap rather than the stack to allocate
381 its socket fd pointers to avoid a crash at termination. Problem
382 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
384 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
385 and putting it in depkgs-qt along with Qt4.3.
387 kes Rework code in acquire.c that switches drives for reading when
388 the Media Type does not match. This should fix bug #906
390 ebl Fix a director segfault during job setup #907
391 kes Correct seg fault in postgresql when first operation returns no
392 rows. Fixes Dirks File browser problem seg fault with bat.
394 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
395 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
398 kes Implement PopUp YES/NO dialog for bat.
400 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
402 kes Correct RunScript to terminate job in FD on failure.
403 kes Change abort_on_error and AbortJobOnError to fail_on_error
404 and FailJobOnError in RunScripts.
405 kes Minor tweaks of code formating in RunScripts, principally to
406 avoid depassing 80 columns.
408 kes Eliminate one #ifdef Win32 in bsmtp
409 kes Implement grow tool to grow a file for testing very large databases.
410 kes Add big-vol-test to test Bacula seeking with > 5GB.
413 kes Modify find_next_volume() to return all values in Media record.
414 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
418 kes Update Release notes
420 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
421 Warning, in previous beta version, all media get from scratch keep their
424 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
425 This should fix bug #842. Made a note to look at removing the temp
426 files at the end of the install.
427 kes Add ability to mount and unmount a file device providing it is
428 marked as being removable and has the appropriate mount and unmount
429 commands defined in the Device resource. This fixes bug #830.
430 kes When applying a storage override, release all previous storage
431 definitions rather than just prepending the new storage.
432 This should prevent a good deal of confusion.
434 kes Implement ./configure search for qwt libraries.
436 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
437 Win32 FD. This should fix bug #893.
438 kes Remove an unnecessary beep in Win32 init code.
439 kes Update copyright dates in Win32 executable about boxes.
440 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
441 code with a BSD getopt.c and getopt.h.
442 kes Remove sched.h from the Win32 compat directory -- not used.
443 kes Remove the Exit menu item from the Win32 tray monitor. If you really
444 need to shut it down, do it through the services panel or the command
446 kes Remove some inappropriate Bacula FSFE copyrights.
447 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
448 kes Fix regress config non-portable test as pointed out by
449 Florian Heigl <florian.heigl@gmail.com>
450 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
451 as pointed out by Florian Heigl <florian.heigl@gmail.com>
453 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
454 Reported by Frank Sweetser.
458 kes Fix client-only build.
459 kes Integrate client-only fixes for bsys (initgroups) and conio from
460 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
461 kes Make arguments to get_scratch_volume() in same order as other
463 kes Rework the prune_volumes() subroutine so that after purging and
464 no volume found in desired pool, it will check for a scratch
465 volume. This prevents recycling the whole scratch pool.
466 kes Add code to status storage to print boffset_t (largefile support).
468 kes Move qwt (Graphics libarary for Qt4) to depkgs.
469 kes You now need a --with-qwt=<dir> to be able to build bat.
470 kes Update src/win32/cats/bacula_cats.def to include the new
471 db_get_query_dbids() call on Win32.
473 kes Correct a problem when selecting a scratch volume and moving
474 it to another pool that lost some columns.
475 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
476 kes Enhance Autochanger error messages to include Volume and device name.
477 kes Rework prune_volumes() code to take account of InChanger flag,
478 and to handle recycling volumes going to the Scratch pool and
479 current pool because the RecyclePool directive.
480 kes Implement a better and more efficient db_get_query_dbids() to
481 handle creating and passing back a list of DBIds.
485 kes Start work on new more efficient DBId subroutine. First use
486 will be for recycling volume to Scratch inchanger.
487 kes Increase number of JobIds in pruning from 1000 to 10000.
488 This to be replaced by above routine.
489 kes Begin implementation of building Qt4 on Win32.
490 kes Correct typo in fix I added for bad TLS shutdown.
491 kes Pull 2.0.3 patches into patches directory.
492 kes Update Release notes. Include qt-console in line count.
493 kes Update Projects file.
495 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
496 bug in migration code where a job that spanned two volumes
499 kes Implement new BST_DESPOOLING blocked state. Change from locking
500 during despooling in SD to blocking. This means that other threads
501 can work with the device structure, in particular the reservations
502 system while despooling.
504 kes Fix return in reservation message queue that missed clearing
505 the jcr lock (implemented 26Jun07 below).
506 kes Rename a number of dev methods to make locking function names
508 kes Document locking in lock.c. Move lock structures to new file
511 kes Move reservations message lock to lock jcr only this
513 kes Move main SD locking code into lock.c (new file).
514 kes Update Win32 build to include lock.c
518 kes Dirk committed the qwt library code for drawing graphs in bat.
519 kes Tweak install of qwt so that it is integrated with ./configure.
521 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
522 out by Eric (my typo).
523 ebl Fix configure.in to get batch mode enable
524 kes Return correct string from authenticate.cpp in bat when connecting
526 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
527 spurious line drops when using TLS.
528 kes Do not file reparse points when restoring a file that already
531 kes Implement Windows reparse points -- similar to directories, but
532 we do not descend into it. This is a first cut. They seem to
533 be backed up, but restore is not yet tested.
534 kes Remove restore_blocking in tls code when shutting a socket to leave
535 it in blocking mode. Hopefully this will fix the encryption bug
536 reported by Frank Sweetser.
537 kes When opening a file for backup, tell the OS that we are going to
538 read it sequentially -- optimization.
539 kes Change variable names in authenticate_director() to not conflict
540 with member names in bat. Caused great confusion with compiler,
543 kes Queue openssl error messages in case of comm problem.
544 kes Do shutdown() call if socket terminated.
545 kes Remove some duplicated code in tls.c
546 kes Move more of the bsock member variables into private and access
548 kes Add Frank Sweetser's tls-test to the regression suite.
550 kes Add Swedish sv.po file
552 kes Don't print clock skew message in FD if less than 3 seconds diff.
553 kes Add a bit of VSS info to status client.
554 kes Implement a first cut of Vista VSS, using Win2003 code.
558 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
559 loaded tape but uses first drive).
560 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
561 This was indeed a Win32 issue.
563 kes Simplify search of autochanger for in-use Volume.
564 kes Fix exit condition of check for in-use volume. kes Remove
565 inappropriate my_postgresql_free_result() in db_close()
567 kes Fix bad return in FD when encryption signature not found.
568 Probably caused a crash.
569 kes Inhibit missing encryption signature error messages for
570 file types where no signature computed.
571 kes Correct inverted check on autochanger in reservation system.
572 kes Tweak debug code in autochanger reservation.
574 kes Add some additional locking in the cats directory in subroutines
575 that modify packet variables called from batch insert.
576 kes Rework how dcrs are allocated. new_dcr() can now be called
577 with an existing pointer, and it will simply clean it up.
578 This allows the reservation system to test various different
579 devices, and will permit easy device changes.
580 kes A bunch of changes all over to handle new new_dcr() calling
582 kes Work more on the Volume management in the SD. Remember Volumes
583 for tape drives and for autochangers (even virtual disk changers).
584 kes When looking at the Volume list to reserve a drive, handle
585 autochanger names correctly by interating through the changer
586 devices. Also call the Director to see if a Volume is suitable
588 kes Fix some bugs in bscan. Make sure all media records are written.
589 Make sure that valid JobMedia records are written for disk files.
590 Previously they were completely wrong.
591 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
592 that the URLs don't change and so that the developers will all
593 work off the same copy. Rebuild from scrach.
594 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
598 kes Fix seg fault in FD from incorrect digest size.
599 kes Fix argument to non-OpenSSL crypto.c subroutine.
603 kes Remove a few malloc()s from the encryption code.
604 kes Use the class calls to bsock in filed/backup.c and restore.c in
605 place of the old bnet_xxx code.
606 kes Implement code that does an on the fly calculation of the
607 signing digest during restore of encrypted files. It makes
608 a best guess at the algorithm, and if it is not correct, will
609 then revert to the old code which reads the file after it is
611 kes Implement at least one missing crypto stream in stream_to_ascii()
612 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
613 #877 where a reload with bad syntax causes Dir to exit.
615 Cut: 2.1.14 beta (not released)
617 kes Do not free a volume on a tape drive until another volume is
618 mounted and read, or the autochanger unloads the volume.
619 This should help the SD re-use volumes that are already mounted,
620 and should fix bug #886.
621 kes Apply patch from user brettedgar that allows gnome2-console include
622 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
623 kes Apply patch from Lucien Weller that fixes day of week calculation
624 because of DST flag problem. Fixes bug #887.
626 kes Move find_next_appendable_volume() to after acquiring a valid device
627 in reserve.c. This fixes bug #864 -- confirmed by reporter.
629 kes Unable to reproduce bug 872. However added additional testing for
631 kes Bug #874 resolved by documenting SQLite limitations.
632 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
633 kes Bug #881 resolved by removing typo in mtx-changer script.
634 kes Made Frank Sweetser's wiki the official Bacula wiki with his
635 approval. Added a link to the wiki on the web page, and implemented
636 a backup from http://paramount.ind.wpi.edu
638 kes Fix update allfrompool to pass pool name.
640 kes Convert to pure GPL v2 license.
641 kes Fix sscanf problems reported by Peter Buschman that caused
642 a bus error on Solaris.
643 kes Rework (simplify) the select prompt in bat.
644 kes Move get_jobid_from_tid() into lib and create a
646 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
647 should definitely fix the problem of lost error messages in the
649 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
650 kes Eliminate tcpd.h from the project. Enclose the #include from the
651 library with extern C ...
652 kes Add print of signal name when a signal is trapped.
656 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
658 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
659 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
660 makes SQLit3 run 30 times faster, though a bit less safe.
661 kes Implement --with-batch-insert in configure and detection of thread
662 safe libraries. It is on by default, but turned off if no thread
663 safe library (e.g. SQLite 2) is available.
665 kes Fix Bacula PostgreSQL buffer overruns.
666 kes Do better checking for NULL results returned from PostgreSQL;
667 implement retry for failed queries; clear results buffer after
668 failed query. Hopefully this will correct the PostgreSQL failures.
670 kes Implement algorithm to handle only one appendable volume with
671 Prefer Mounted Volumes = no.
672 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
673 returned from a query.
674 kes Make volume lock recursive.
675 kes Implement an additional volume reservation algorithm that
676 starts by considering all reserved volumes then uses the
677 old brute force algorithm of searching the resources to
678 find a suitable device.
679 kes Add new reservations debug code and refine the old code.
680 kes Update the win32/dll/bacula.defs file.
682 kes Tweak reservations algorithm to permit a few more cases, i.e.
683 volume reserved, but on different drive, ...
684 kes Enhance SD status to include Pool and Media Type for drive in a
685 more readable format (a bit longer).
686 kes Fix PostgreSQL double free.
688 kes Minor refactoring of restore decryption code.
689 kes Add code to smartall.c to detect double free of a buffer.
691 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
692 so that bsmtp will create a correct email address (mailbox only).
693 kes Modify 'memory' command so that the buffers are listed as 'In use'
694 to avoid confusion with Orphaned buffers.
695 kes I reworked the OpenSSL include/lib flags to be handled in
696 the standard Bacula way, which should fix bug #863 concerning
697 non-standard OpenSSL libraries.
699 kes Implement Help Browser window for bat.
700 kes Fix reload bug that reset StorageId to zero.
702 kes Fix TLS #ifdefing when TLS turned off.
703 kes Ensure that when labelling a tape with Slot=0 that InChanger
705 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
707 kes Add StartTime to final uar_sel_jobid_temp query so that we can
708 add DISTINCT (required by PostgreSQL).
709 kes Implement BSOCK authenticate_director() method. Eventually will
710 authenicate all daemons.
711 kes Move several more functions into the BSOCK class.
713 kes Add code to tell the OS that we no longer need a cached
714 file that we were reading. In findlib/bfile.c. Also,
715 only cache files that we are reading. Thanks to
716 Tobias Oetiker <tobi@oetiker.ch> for the idea.
717 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
718 kes Implement script to automatically generate cats and dll .def
720 kes Update README.mingw32 to include new .def file generation.
721 kes Correct typo in UTF-8 error message as reported by:
722 jhernandez <julianhernandez@gmail.com>
723 kes Add additional sm_check() code on debug level 1.
724 kes Set default debug level to 1.
725 kes Trap SIGABRT in attempt to get traceback.
727 kes Reduce bat connect timeout from 30 to 15 seconds.
728 kes More restructuring and implementing BSOCK class in place of
730 kes Remove a few unnecessary malloc() tests in crypto code.
731 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
732 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
733 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
735 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
737 kes Fix Verify InitCatalog. The attributes were not pointing to the
738 correct saved location.
739 kes Implement message callback so that GUI is sure to get all
740 daemon messages. Currently displayed in a dialog in bat.
741 kes Ignore SIGUSR2 (Bacula timer) in bat.
742 kes Apply regress patch from bug #859 to allow regress to work
743 with Solaris compiler.
745 kes Begin adding TLS support to bat.
746 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
747 clean up lex.c and make it more readable.
749 kes Move more bnet functions into the BSOCK class.
750 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
751 kes Complete change of berrno strerror() method to bstrerror()
755 kes Cleanup incorrect email addresses in bsmtp.
756 kes Make bat display initial messages rather than discard them.
758 kes First cut of adding .mod to the run command.
759 kes Implement auto display of messages in bat.
760 kes Enhanced preferences to allow all Bacula output to be
763 kes Try to make bsmtp date routines more generic.
764 kes Fixed bug #856 autochanger documentation.
765 kes Rework bsmtp date editing for Win32. This fixes bug #854.
766 kes Add new cats entry point so Win32 builds.
768 kes Attempt to fix bsmtp date editing on OSes without %z editing.
770 kes Do better checking for the MySQL 64 bit libraries looking for both
771 .a and .so libraries.
772 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
773 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
774 kes Require the thread safe version of MySQL during configure. Thanks
775 to Andre Noll for pointing this out.
776 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
777 continuing in migration code.
778 kes Apply implementation of tray-monitor font derived from gnome-console
779 submitted by Andreas Piesk <a.piesk@gmx.net>
781 kes Eliminate important memory loss in SQLite
782 kes Fixed the batch insert MySQL thread specific data that was not
783 being freed. See cats/mysql.c:db_thread_cleanup().
784 kes Fix restore before command.
785 kes Convert old hdr.name to name() in a few places.
786 kes Implement update jobid command.
787 kes Return all time_t dates in db_get_job_record()
788 kes Stop watchdog in SD earlier.
789 kes Put Pool just after Storage in please mount message.
790 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
793 kes Update the po files.
794 kes Fix Verify InitCatalog by making it cache attributes.
796 kes Change name bacula-bat to bat for man 1 page to correspond to
798 kes Check for client and store NULL pointers in status command. This
800 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
801 kes Fix sign extended editing of %p.
802 kes Clean out a little old #ifdefing in cats/mysql.c
804 kes If time diff between DIR and FD is more than 600 seconds convert
805 INFO message to WARNING.
806 kes Implement heap size display in status for all daemons.
807 kes Attempt to fix MySQL db open memory loss (not successfull).
808 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
809 kes Eliminate memory loss in MySQL (possibly other SQLs) during
810 Query. This looks like a MySQL but but by doing extra releases,
811 the memory goes away. This should fix bug #847.
813 kes When backup fails, cancel SD before waiting for sd termination.
814 kes If SD is waiting for FD to connect during cancel, wake up the
816 kes Fix fsf code so that errno is correctly reported.
817 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
819 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
820 so that Bacula doesn't later stumble into a seg fault.
821 kes Use the term Restore Client in the restore Job report.
822 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
823 the original job's FileSetId.
824 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
825 spooling in migration jobs. Not yet tested.
826 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
827 reading conf file from a pipe. However, do it with open_bpipe()
828 rather than popen. Not yet tested.
830 kes Fix an ugly bug where the VolCatBytes were getting updated
832 kes Implement bconsole memory command that prints current memory
833 usage, plus smartalloc dump.
834 kes Clarify some error messages in backup, admin, and migrate.
835 kes Shrink label dialog to smaller size.
836 kes Invert Cancel OK buttons on restore to be OK Cancel.
837 kes More strerror() to bstrerror() conversions.
839 kes Start implementing bstrerror() in place of strerror().
840 kes Stripping path -- seems to work.
842 kes Prevent door and port files from being restored (mostly
844 kes Free an unreleased buffer in compat code.
845 kes Change console Job name from *Console* to -Console- to eliminate
846 Win32 filename problems. Put Win32 path separator when creating
847 Console file. This fixes bug #846.
848 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
850 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
852 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
853 to force Win32 error message.
855 kes First cut strip path. The data should be passed to the FD,
856 but nothing is done with it yet.
857 kes Enhance the digest and signature routines in the crypto
858 library to accept a JCR and to use it to print error messages
859 so that they will go in the Job report rather than the daemon's
861 kes Simplify some of the verify signature code.
862 kes Simplify a few of the alternative returns in the signature
865 ebl Use only POSIX regex instead of GNU regex in breg.c for
866 File relocation. It fix broken freebsd compilation.
867 kes Convert all other Dir files to use new ua class message
869 kes Tentative fix for missing digest signature in bug 807.
870 kes Correct handle problem in new win32_ftruncate routine.
871 kes Convert ua_purge.c and ua_update.c to use new ua class
872 message routines for bat.
874 kes Correct incorrect installation of LICENSE in Win32 installer.
875 kes Display LICENSE at the beginning of the Win32 install.
876 kes Attempt to correct the need for the png files to be installed
878 kes Reapply my bat.conf install script in qt-console. I think I
879 editted bat.pro instead of bat.pro.in and it was lost.
880 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
881 the /var/lock/subsys for subsysdir. Also corrects typos in the
884 kes First cut update job.
885 kes Correct configure to include qmake of src/qt-console directory.
887 kes Make restore job yes/mod/no print in one command so GUI works.
888 kes First cut implementing backup and restore client.
889 kes Correct editing in Verify output that caused a seg fault.
891 kes Insure that bat.conf is not overwritten during installation.
892 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
893 while I was implementing migration in March 2006 !
895 ebl Cleanup file relocation, using char *RegexWhere instead of
896 char *where + bool where_use_regexp
897 kes Update some manpages and add bat manpage.
898 kes Make a first cut at converting bacula.spec.in for bwx-console
900 kes Apply patch from John Goerzen to add hostname as fourth argument
901 to make_catalog_backup script.
902 kes Fix typos I introduced into bsmtp.c
903 kes Make pm_strxxx() routines handle input of NULL pointer. This
904 is to protect from NULL pointers returned from SQL databases.
905 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
906 kes Add more debug to FIFO code -- fix fifo regression test.
908 kes Implement posix_fadvise in FD, and for reading spool files in SD.
909 kes Add thread timer to bnet_connect() to break from OS if wait time
912 kes Update Win32 build to include new files, new symbols, and
914 kes Implement socket level heartbeat (tcp_keepidle)
915 ebl Commit File relocation patch
916 kes Make bat have 'make install' target.
917 kes Warn during install if old gnome-console binary found.
918 kes Warn during install if old wx-console binary found.
919 kes Add -8 option to bsmtp command line to add content type utf-8.
920 Fixes bug #809. (Character coding problem in bsmtp).
921 kes If < is found in target (from, to, cc) then do not enclose the
922 target in < > in bsmtp. Fixes bug #772 (malformed address).
923 kes When printing certain items in dbcheck, stop after 300000.
924 Fixes bug #822. (dbcheck loops).
925 kes Incorrect status in Dir after waiting for mount with poll set.
928 kes Extend idea of Prefer Mounted Volumes to mean a volume about
930 kes Print waiting to reserve a device every 5 mins.
932 kes Don't call close_part in label.c if tape and relabel.
933 kes Don't free volume if busy in close() -- should help with
935 ebl Fix #824 RunScript bug (After script could be execute twice)
936 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
937 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
938 Add a regression script to test RunScript
940 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
943 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
944 deprecated. No additional bugs will be fixed, and they will be dropped
945 in a future release (probably 2.4.0).
946 kes Change name of wx-console to bwx-console to make it more Bacula
948 kes Change the name of gnome-console to bgnome-console to make it
951 kes Some time in March, a Feature Request with patch from Jorj Bauer
952 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
954 The ability for the director to validate a Client (FD) CN against
955 an arbitrary set of patterns rather than the hostname, with
956 A new 'TLS Allowed CN' set of directives which are implemented
957 in the Client resource. Then pattern matching is used in place
958 of hostname matching against the Certificate's CN. As an example, we
959 have certificates which (a) use a local CA, and (b) have a CN of the
961 kes Add new/changed entry points to Win32 build
962 kes Create unaccepted-projects for projects that are not accepted.
963 kes Simplify locking in the reservations system.
964 kes Add more debug code in reservations.
965 kes Make sure error condition on reserving a volume is handled correctly.
966 kes Correct handling of volume_in_use.
967 kes Correct handling of initializing a device.
968 kes Move handling of broadcasting releasing a device into release_device().
969 kes Correct attaching dcr to dev so that it is only done if device
970 is properly initiated.
972 kes Locking debug level tweaks in SD.
973 kes Tweak new Volume code.
975 kes Add exec external-command [wait-seconds] to bconsole. This
976 executes the external-command. Note! normally external-command
977 should be enclosed in double quotes.
978 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
979 it should normally be off in a production system.
981 kes Implement die command for SD so that we can force it to dump.
982 kes Implement SD lock debug code.
983 kes Implement new algorithm for keeping Volume list in SD. It
984 is now owned by the device.
986 kes Implement new code for freeing in use volumes that should
987 resolve if not all, some of the problems of multiple drive
988 tape conflicts described in bug 801.
990 kes Fix gui/bacula-web/images files in svn.
991 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
993 ebl Fix a bug in batch mode (in string escape)
994 kes Correct migration prune SQL typo that crept in in a
997 kes Move bnet_despool() into class in bsock.c
998 kes Modify job report to include director name and Build OS.
999 kes Move drop root privilege and check_catalog() before fork.
1000 kes Add update database scripts (version 9 to 10) to updatedb directory.
1002 ebl Check size and age of each file after its backup to see if
1003 it has changed during backup, if 'checkfilechanges' is set.
1004 The FD will do an extra check (stat(2)) after
1005 each file backup. mtime, ctime and size are compared with
1006 'before backup' information. If time or size mismatch, an
1007 error message will be generated. You must upgrade FD to use it.
1009 kes Make database name and user configurable
1010 --with-db-name=xxx --with-db-user=xxx
1011 kes Add back database type to message.c for debugging.
1013 kes Implement dir_sql() which issues an SQL query.
1014 kes Modify bat medialist to use dir_sql() and do some minor C++
1015 formatting as well as eliminating a number of pointers, simplifing
1018 kes Fix some of the mtx-changer grep commands for tape label readers.
1019 kes Convert a number of bsendmsg into the appropriate send/warning/error
1020 message class calls.
1021 kes Suppress the using database message in the .sql command.
1022 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1024 kes Add context menu for floating a window.
1025 kes Some minor cleanup and name changes in qt-console
1026 kes Add doing mt setblk 0 in Win32 mtx-changer.
1027 kes Apply Martin's bug fix to move definition of ENODATA for
1029 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1030 sqlite2 and sqlite3.
1032 kes More pruning cleanup.
1033 kes Turn on wait_for_drive by default in mtx-changer.
1034 kes Turn on Batch insert code by default as it now passes regression.
1035 kes Add ./configure --enable-bat to enable building of Bat.
1036 No install yet though.
1038 kes Implement a new .sql command for bat.
1039 kes Implement code to turn off pruning in obtaining the next volume.
1040 Pruning is turned off for the status dir command, but turned on
1041 for SD requests and for the list nextvolume command.
1043 kes Correct Qmsg() that was not updated correctly when committing a
1044 previous change (probably the recent TLS patch).
1046 kes Write new subroutine is_volume_purged() that explicitly checks
1047 if the Volume is purged, and if so marks it as such. This should
1048 resolve problems reported about needing to mount twice to recycle
1050 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1051 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1052 amount of duplicated code.
1053 kes Do volume pruning only for the Media Type desired (reduces pruning time
1054 if multiple Media Types are in the same pool).
1055 kes Implement more detailed info in the Job report for the Bacula version
1057 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1059 ebl Add bbatch tool to bench database and insert mode.
1060 Fix sql quote stuff in batch mode
1061 Fix sql stuff for mysql
1063 kes Correct problems with am/pm scheduling. Fixes bug #808.
1064 kes Implement new prunning code that prunes up to 1000 jobs at
1065 the same time. The same technique can be applied to a number
1066 of other prune/purge subroutines.
1067 kes Add an insanity check when starting a new tape job to ensure
1068 that the tape position has not been changed. If so fail the
1070 kes Fix Win32 build for dlls to add the folllowing:
1071 src/lib/bsock.c -- new file with new entry points
1072 src/lib/dlist.c -- new entry points
1073 src/cats/sql_create.c -- new entry point
1074 src/cats/sql_cmds.c -- new DATA item exported
1076 ebl batch mode cleanup bscan-test is ok now.
1077 kes Implement SD code to check length of disk volume before appending.
1079 kes Correct return status on db_batch... routines.
1080 kes Add call to db_write_batch_file_records() to migration code.
1081 ebl Fix AfterJob timing
1082 kes Move the checking of the database in initializion of the Director
1083 to after we drop privileges. This avoids the need for both root
1084 and bacula access to the DB.
1085 kes Correct a misplaced variable definition in src/filed/backup.c
1086 kes Correct how the new batch insert db_create_attributes_record()
1087 uses the arguments. Caused a seg fault in bscan.
1088 kes Implement lock() and unlock() methods in DEVICE class.
1089 Implement block() and set_block(xx) methods in DEVICE class.
1090 kes Modify bnet_connect() so that it uses time() to check for the
1091 wait time expiring (on some OSes, some system calls may not
1092 return immediately).
1093 kes Modify Verify to obtain the previous JobId when it is actually
1094 running rather than at schedule time (as it was in 1.38.x).
1095 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1097 kes When checking pid in pid file, continue running if the pid is
1098 the same as ours. This occurs on IRIX after a system crash.
1101 kes Extend new GUI API.
1102 kes Make the ua structure a class, and implement send_msg(),
1103 error_msg(), warning_msg(), and info_msg().
1105 kes Apply fix from for building wx-console on the Mac from
1107 kes Implement new select mechanism for GUI programs.
1108 kes Reorganize initialization of stackedWidgets in bat.
1110 kes Add updated nagios plugin supplied by Christian Masopust.
1112 kes More bat implementation.
1113 kes File migrate bug with Pool Occupancy using mediaid instead
1114 of jobids. Fixes bug #795.
1115 kes Fix orphaned buffers in filed backup and verify due to
1116 crypto buffers not freed during errors. Fixes bug #789.
1117 kes Extend new GUI api code to tree commands.
1118 kes Ensure that tree and dot commands check console ACLs.
1119 kes Permit marking directory with trailing slash.
1120 kes Allow 20 console connections (instead of only 10).
1122 kes Add smartctl call to bacula-sd.conf as an example of getting
1125 kes Modify jobq.c to let simultaneous restore jobs run. This may
1126 cause them to fail if they cannot get a drive.
1127 kes Add Client Connect Wait to Storage daemon to permit users to
1128 modify the time the SD waits for a FD connection.
1130 kes Correct virtual changer check which was backwards. This caused
1131 volumes to be unloaded into slots already occupied.
1133 kes Apply Command ACL filter to JobId list in restore command.
1134 kes Correct typeo in var.c patch.
1136 kes Don't let Bacula prune File or Job records for the current Job.
1137 kes Fix variable substitution pad + inc bug reported (with patch)
1140 kes Correct SQLite log table index as reported by Luca Berra.
1142 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1144 kes Begin implementing new comm signals for API.
1145 kes Fix a few places in lib/message.c where the open fd may
1147 kes Continue implementing lib/bsock.c (real class). Make jcr,
1148 who, host, and port private. There are new methods to access
1149 them for non-class use. This required touching a number of files.
1151 kes Add LANG=C to autoconf/randpass so it works with languages other
1152 than English. Fixes bug #788.
1154 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1156 You will not be able to generate Include/Exclude list any more.
1157 It will be fixed soon.
1158 If you want to use this, you can apply
1159 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1161 kes Restore of sockets created false error messages because Bacula
1162 no longer restores sockets, but the code was still trying to
1163 set the attributes on a non-existent file. Reported by a user.
1164 ebl finish RecyclePool feature
1165 Media will takes Pool.RecyclePool
1166 when moving from Scratch to a Pool or when user will do
1167 update volume=xxx frompool
1168 To use it, add RecyclePool = aPool to your Pool resource
1171 RecyclePool = Scratch
1175 kes Expand new BSOCK class adding signal() and new BNET signals.
1176 kes Begin enhancing the dot commands adding a new API function
1177 that returns more information and will make it easier
1178 to interface to the Director from a program.
1180 kes Make DEVICE fd private. Its new name is m_fd, and can be
1181 obtained with dev->fd() outside the class. This is the
1182 first of many DEVICE members to be made private.
1183 kes Implement Michael Renner's idea on having a virtual disk
1184 changer. I made some minor modifications (e.g. I did not
1185 implement the Virtual Changer directive, but simply set
1186 the Changer Command to an empty string.
1188 kes Implement a BSOCK send() method that writes the whole record
1189 in a single write() request rather than in two.
1190 ebl add update volume=xxx recyclepool=yyyy
1191 volume takes recyclepool from pool when using update volume=xxx from pool
1193 kes Fix encryption deblocking bug, which caused some restored files
1194 to be truncated. This fixes bug #763.
1195 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1196 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1198 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1199 ebl Use btime_t instead of uint64_t in media patch.
1201 kes Optimize the use of the database a bit in the Status dir command.
1202 Only open it when needed, ensure that if any previous database
1203 was opened, it is closed.
1205 kes Correct VolCatBytes bug from media patch.
1206 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1207 in the case of orphaned records.
1208 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1209 and File records in 300K chunks to be more efficient. This
1210 idea came from Juan Luis Frances (if I remember right).
1211 kes Apply Eric's scratch patch that moves a purged Volume to
1212 the RecyclePool. Question: how is RecyclePool set? what
1213 happens to the ScratchPool?
1214 kes Apply Eric's media patch that collects read/write media
1215 times as well as byte counts. This patch requires a
1216 simultaneous upgrade of the DIR and SD. Note, there
1217 should be some way to turn off timing. I'm not sure
1218 times are in Bacula units.
1219 kes Apply Eric's batch-insert patch.
1221 kes Update projects list.
1223 kes Implement Include/Exclude file lists in FD as dlists using
1224 the new dlistString class. This permits efficiently having
1225 large include/exclude lists and completes project Item 25.
1226 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1227 console is authorized to cancel the job. This fixes bug
1229 kes Modify SD so that the VolCatJobs medium record is updated
1230 at the beginning of a Job rather than the end. This
1231 fixes bug #775 where exceeding MaxVolJobs caused jobs
1233 kes Added a mutex around getting and setting Volume information
1234 so that multiple simultaneous jobs will single thread.
1236 Switch to using Subversion
1237 kes Remove src/pygtk-console/ from configure
1239 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1240 plus the entrypoints.
1241 kes Apply patch supplied that corrects debug print
1242 in canceling jobs for max run time. Supplied as
1243 part of bug #621, which was previously fixed.
1245 kes Test on job_canceled() and sd_msg_thread_done inside
1246 loop starting the message thread to avoid a race condition.
1248 kes Remove rl_catch_signal from console.c as it conflicted
1249 with the header definition. Fixes bug #765.
1250 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1252 kes Clarify some stored/acquire messages to indicate if the
1253 problem is with read or append.
1255 kes Fix memory leak with storage ids in cats/sql_get.c
1256 kes Terminate watchdog earlier to avoid reference to released
1257 memory -- reported by Jason Austin.
1258 kes Move closing the database from jobq.c to the director daemon
1259 termination routine. This fixes memory leaks for shadow jobs
1260 (i.e. migration jobs).
1261 kes Free up the unique jobid chain items in migrate.c. This fixes
1262 a memory leak problem.
1263 kes Convert some ugly looking for statements to use foreach_alist
1264 in findlib/find.c. This will facilitate converting the structures
1265 to use dlist (for large include/exclude lists).
1266 kes Fix a bug in the btree.c and btree.h routines, then rename them
1267 rblist and add them to be built in src/lib. Include some new
1268 methods written by Rudolf Cejka that make the code more readable
1269 (hides some of the ugly casting).
1270 kes Add set_next() and set_prev() methods which make the code much more
1271 readable. Also add a new dlistString class that facilitates storing
1272 strings in dlists. To be used in the large include/exclude lists.
1273 kes Make some trivial modifications to lib/tree.h that use rblist
1274 rather than dlist for storing the tree links. This was suggested
1275 by Rudolf Cejka. The result of this is that the restore tree now
1276 uses red-black binary trees rather than simple linked lists. This
1277 should give rather dramatic speed improvements for directories
1278 contining large numbers of directories/files (more than 10000).
1280 kes Fix maxruntime bug #621.
1282 ebl Implement the include JobID in spool file name project.
1283 kes Reorder projects file in order determined by Jan 2007 vote.
1284 kes Implement item #12 on project list -- quick release of FD by
1286 kes Fix open of SQLite3 db where user does not have write permission
1287 so that DIR does not crash. Fixes bug #761.
1289 kes Add back missing @ in Win32 Makefile.
1290 kes Change 'Device not configured to autolabel' from INFO
1292 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1293 which should restart an indefinite # of times.
1294 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1295 other DIR specifications.
1297 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1298 Fix path quoting in SQLite scripts.
1299 Fix problems with SHGetFolderPath.
1301 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1303 kes Fix Job restart on error bug that promotes an Inc to a Full
1304 backup. This should fix bug #755.
1305 kes Add qt-console and first cut of code.
1309 kes Fix Bacula->Documentation link on Win32 to point to index.html
1310 instead of bacula.html. Fixed bug #750.
1311 kes Return JobId in db_get_job_record() when JobId==0. This should
1313 kes Do not release source pointers when restarting a failed job.
1315 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1316 This *should* fix bug #747.
1317 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1320 kes Modify USTORE constructor to set an empty store_source string,
1321 and don't copy the store_source string in a cancel. Hopefully
1322 this will fix Arno's seg fault, bug #744.
1323 kes Add back code to disable conio in configure. Fixes bug #743.
1324 kes Correct the Options scanner in the FD to correctly handle
1325 SHA1 option, which was eating the next option. Reported by
1327 kes Add code to indicate when the SD is spooling, spool wait, and
1328 despooling as requested by Alan Brown.
1330 Version 2.0.0 released: 4 January 2007