1 Technical notes on version 2.3
5 kes Add jcr to timer packets so if killed message can be sent to job.
6 kes Add JobId to all Dmsg() output.
7 kes Put some FD auth code on dbglvl rather than fixed.
8 kes Return insert attributes error message in db msg buffer to avoid
10 kes Separate batch init error messages.
11 kes Make SD code that contructs attribute insert check string lengths
13 kes If Dir gets an error during inserting attributes, cancel SD.
14 This reduces unnecessary error messages.
16 kes Correct search boolean for getting Volume info
17 ebl Cleanup batch code.
18 kes Back out one small change to the reservation system (reserving a volume).
19 kes Rework how a Volume is mounted. It is now much more intelligent and
20 will always attempt to use any mounted volume if possible and reduces
21 calls to the Director asking about volumes.
23 kes Turn off some code when batch insert not enabled.
24 kes Edit FD name in connect error messages.
25 kes Rework the reservation system to take into account that the Director
26 might give us a Volume that is different from the current one being
27 used, and to ensure that we don't exceed Maximum Volume Jobs.
28 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
29 fatal error with multiple jobs running'
30 kes Add more debug code in reservation system.
31 kes Implement maxvol-test to check bug #947.
33 kes Add code to handle tray monitor separated from Win32 FD.
34 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
36 kes Add missed return in fixing verify bug -- trunk only.
37 ebl Fix a command parser issue causing a director segfault.
38 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
40 kes Increase the max block size to 4MB fixes bug #957.
41 kes ERABT if user sets min block size > max block size. Fixes bug #956.
42 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
43 is not properly mounted (recognized) during a poll.
44 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
45 Job that has differences reports Verify OK.
46 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
48 ebl Add an option to operate on all pools with update vol parameters.
49 This complete the project 20. Patch from Nigel Stepp.
50 ebl Add history support to bconsole when using readline.
51 Using Ctrl-D to exit doesn't update .bconsole_history
52 kes Modify new volume algorithm to use max MediaId for generating next
53 volume number rather than the count of Volumes. This should essentially
54 eliminate the failure rate if some volumes were deleted. Bug #921.
55 kes Begin implemention of Optimize Job Scheduling.
56 kes Implement restore callback that Dirk and I agreed on for bat
57 restore. This fixes bug #928. Restore of backup of zero files fails.
58 kes Fix SQL Catalog logging which broke with new db_escape_string
61 kes Fix bacula_cats.def for new db_escape_string().
62 kes Increase size of name string when FD making connection to SD.
63 May fix bug #953. FD->SD connection failure.
65 kes Add code to help Dan debug 2drive-incremental-2disk test.
66 kes Add code to try to fix bug #908.
67 kes Add waits to multiple exit detection code to try to force pid
68 file to always be deleted.
69 kes Restore good dev.tar.gz to rescue set appropriate binary property.
71 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
72 trying to switch drives by checking for blocking before unblocking.
74 kes Cancel storage daemon in all cases where FD reports error. This
75 should fix virtually all cases of bug #920.
76 kes Fix db_escape_string() for MySQL which did not compile.
78 kes Fix error message that was clobbered when Dir tells SD it does not
79 have write permission on Volume. This should fix a minor point
80 in bug #942, but not the main problem.
81 kes Add code to cancel job in SD if FD connection fails. This should
83 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
84 dvl Pass jcr and db into db_escape_string() to enable better escaping
86 kes Fix migration code to get correct Volume name with multiple volumes
87 by skipping |. Fixes bug #936.
88 kes Implement patch supplied by Landon to fix bug #944 where using
89 TLS with bconsole uses 99+% of the CPU.
90 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
92 kes Move patches into patches directory.
94 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
97 ebl Using "m" in bconsole will show messages like before,
99 kes Fix bug #935, and probably also bug #903 where files were not
100 restored. MediaId was not properly set in JobMedia record after
103 kes Suppress chown and chmod error messages if the FD is not running
106 kes Apply Martin Simmons' patch that should turn off the new API usage
107 when batch insert is turned off allowing building on older
109 kes Add ./configure search in qwt-qt4 for qwt package
111 kes Bacula is now free of 3rd party GPL copyrighted code!
113 kes Add guid_to_name.c/h which replace idcache.
114 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
116 ebl Detect if new PosgreSQL batch insert API is present.
117 kes Correct incorrect mempool call causing Director crash. Occurs on
118 systems without va_copy().
119 sb Update spec files for 2.2.1 release
121 kes Fix memory pool call in ua_output.c. bug #934.
122 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
123 Add test program to fnmatch.c
125 kes Integrate patch to README.vc8 from
126 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
127 edit it to get it into Unix patch format.
128 kes Implement mkpath.c to replace old FSF makepath.c
130 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
132 Release Version 2.2.1
134 kes Update POTFILES.in
135 kes Cleanup a few underquoted AC_DEFUNs in configure
136 kes Apply patch from Martin Simmons that adds a test for va_copy to
139 kes Fix bug #921 by increasing the number of tries to create a new volume
141 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
142 can be called multiple times. Implement a version for machines
143 without va_copy() that gets a big buffer.
145 kes Integrate more portable zone offset code into bsmtp.c
146 Submitted by Attila Fülöp.
148 kes Fix bad SD->FD return status reported by
149 (James Harper) <james.harper@bendigoit.com.au>
150 ebl Fix a bug in read_close_session which return random status
151 thanks to James Harper
153 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
154 and directory names during restore of single file/directories.
155 kes Add sanity checks to .sql command when string is empty. Hopefully
156 that will resolve Dirks Director crash.
158 kes Apply patch submitted by Martin Simmons that corrects a seg fault
159 in the bsmtp chat subroutine when debug is >= 10.
161 kes Fix Director crash when running bat SQL queries.
162 kes Add David's notes on Item 8: Copy pools.
164 kes Rework projects file to be current and ready for a vote.
165 kes Enhance lex scanner error message.
167 kes Tweak LICENSE file to mention BSD code.
168 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
169 if specified on the ./configure.
170 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
171 This class is intended to allow us to open a second bsock to the
172 Director while in the restore subdialog.
174 kes Fix configure to create bat Makefile before creating dependencies.
175 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
176 kes Add a tooltip to the tray monitor.
177 dvl Set the Director's PID file before dropping privs. This fixes
180 kes Update AUTHORs file
181 kes Increase the default max concurrent jobs to 20 in FD and SD to
182 correspond with the default .conf files.
183 kes Rewrite the Win32 service routines. This eliminates the 3 copies
184 some different, of the same file created by RN when porting the
186 kes Rearrange some of the Win32 directories and the placement of the files
188 kes Set DEVELOPER flag in version.h
190 ========================================================================
191 Release Version 2.2.0
193 kes Apply a second doc patch from Marc.
194 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
195 improves the tips section that discusses how to setup multiple
198 kes Update bat README file.
199 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
200 corrects a typo in the Recycle status check in db_find_next_volume().
201 This will probably fix a number of annoying problems with multiple
203 kes Modify most of dird/msgchan.c to use bsock class calls rather than
204 bnet calls -- no functionality change.
206 kes Modify the Verify output to specify if files are missing on
207 the Volume(s) or disk. Fixes confusion in bug #916.
208 kes When more than one Volume is read in a migration job, the last
209 Volume bytes reported are from the last read volume rather than
210 the last written volume. Fixed. This fixes bug #910.
211 kes Fix display of Recycle flag after update volume=foo recycle=yes.
212 It previously printed New Recyle flag is: no. This fixes bug
215 kes Correct seg fault when switching tape drives during restore.
216 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
217 be used until after 2.2.0 release.
219 kes Remove fnmatch() in SD that permitted wild card specifications.
222 kes Fix %g in filename returned by SQL for browse tree reported by
224 kes Fix configure so that it puts config.out in the cwd rather than
226 kes Attempt to fix the locking problem reported by Eric in bug #906.
227 kes Make berrno class to leave errno unchanged after constructor call.
228 kes Make bnet_server use the heap rather than the stack to allocate
229 its socket fd pointers to avoid a crash at termination. Problem
230 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
232 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
233 and putting it in depkgs-qt along with Qt4.3.
235 kes Rework code in acquire.c that switches drives for reading when
236 the Media Type does not match. This should fix bug #906
238 ebl Fix a director segfault during job setup #907
239 kes Correct seg fault in postgresql when first operation returns no
240 rows. Fixes Dirks File browser problem seg fault with bat.
242 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
243 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
246 kes Implement PopUp YES/NO dialog for bat.
248 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
250 kes Correct RunScript to terminate job in FD on failure.
251 kes Change abort_on_error and AbortJobOnError to fail_on_error
252 and FailJobOnError in RunScripts.
253 kes Minor tweaks of code formating in RunScripts, principally to
254 avoid depassing 80 columns.
256 kes Eliminate one #ifdef Win32 in bsmtp
257 kes Implement grow tool to grow a file for testing very large databases.
258 kes Add big-vol-test to test Bacula seeking with > 5GB.
261 kes Modify find_next_volume() to return all values in Media record.
262 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
266 kes Update Release notes
268 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
269 Warning, in previous beta version, all media get from scratch keep their
272 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
273 This should fix bug #842. Made a note to look at removing the temp
274 files at the end of the install.
275 kes Add ability to mount and unmount a file device providing it is
276 marked as being removable and has the appropriate mount and unmount
277 commands defined in the Device resource. This fixes bug #830.
278 kes When applying a storage override, release all previous storage
279 definitions rather than just prepending the new storage.
280 This should prevent a good deal of confusion.
282 kes Implement ./configure search for qwt libraries.
284 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
285 Win32 FD. This should fix bug #893.
286 kes Remove an unnecessary beep in Win32 init code.
287 kes Update copyright dates in Win32 executable about boxes.
288 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
289 code with a BSD getopt.c and getopt.h.
290 kes Remove sched.h from the Win32 compat directory -- not used.
291 kes Remove the Exit menu item from the Win32 tray monitor. If you really
292 need to shut it down, do it through the services panel or the command
294 kes Remove some inappropriate Bacula FSFE copyrights.
295 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
296 kes Fix regress config non-portable test as pointed out by
297 Florian Heigl <florian.heigl@gmail.com>
298 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
299 as pointed out by Florian Heigl <florian.heigl@gmail.com>
301 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
302 Reported by Frank Sweetser.
306 kes Fix client-only build.
307 kes Integrate client-only fixes for bsys (initgroups) and conio from
308 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
309 kes Make arguments to get_scratch_volume() in same order as other
311 kes Rework the prune_volumes() subroutine so that after purging and
312 no volume found in desired pool, it will check for a scratch
313 volume. This prevents recycling the whole scratch pool.
314 kes Add code to status storage to print boffset_t (largefile support).
316 kes Move qwt (Graphics libarary for Qt4) to depkgs.
317 kes You now need a --with-qwt=<dir> to be able to build bat.
318 kes Update src/win32/cats/bacula_cats.def to include the new
319 db_get_query_dbids() call on Win32.
321 kes Correct a problem when selecting a scratch volume and moving
322 it to another pool that lost some columns.
323 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
324 kes Enhance Autochanger error messages to include Volume and device name.
325 kes Rework prune_volumes() code to take account of InChanger flag,
326 and to handle recycling volumes going to the Scratch pool and
327 current pool because the RecyclePool directive.
328 kes Implement a better and more efficient db_get_query_dbids() to
329 handle creating and passing back a list of DBIds.
333 kes Start work on new more efficient DBId subroutine. First use
334 will be for recycling volume to Scratch inchanger.
335 kes Increase number of JobIds in pruning from 1000 to 10000.
336 This to be replaced by above routine.
337 kes Begin implementation of building Qt4 on Win32.
338 kes Correct typo in fix I added for bad TLS shutdown.
339 kes Pull 2.0.3 patches into patches directory.
340 kes Update Release notes. Include qt-console in line count.
341 kes Update Projects file.
343 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
344 bug in migration code where a job that spanned two volumes
347 kes Implement new BST_DESPOOLING blocked state. Change from locking
348 during despooling in SD to blocking. This means that other threads
349 can work with the device structure, in particular the reservations
350 system while despooling.
352 kes Fix return in reservation message queue that missed clearing
353 the jcr lock (implemented 26Jun07 below).
354 kes Rename a number of dev methods to make locking function names
356 kes Document locking in lock.c. Move lock structures to new file
359 kes Move reservations message lock to lock jcr only this
361 kes Move main SD locking code into lock.c (new file).
362 kes Update Win32 build to include lock.c
366 kes Dirk committed the qwt library code for drawing graphs in bat.
367 kes Tweak install of qwt so that it is integrated with ./configure.
369 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
370 out by Eric (my typo).
371 ebl Fix configure.in to get batch mode enable
372 kes Return correct string from authenticate.cpp in bat when connecting
374 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
375 spurious line drops when using TLS.
376 kes Do not file reparse points when restoring a file that already
379 kes Implement Windows reparse points -- similar to directories, but
380 we do not descend into it. This is a first cut. They seem to
381 be backed up, but restore is not yet tested.
382 kes Remove restore_blocking in tls code when shutting a socket to leave
383 it in blocking mode. Hopefully this will fix the encryption bug
384 reported by Frank Sweetser.
385 kes When opening a file for backup, tell the OS that we are going to
386 read it sequentially -- optimization.
387 kes Change variable names in authenticate_director() to not conflict
388 with member names in bat. Caused great confusion with compiler,
391 kes Queue openssl error messages in case of comm problem.
392 kes Do shutdown() call if socket terminated.
393 kes Remove some duplicated code in tls.c
394 kes Move more of the bsock member variables into private and access
396 kes Add Frank Sweetser's tls-test to the regression suite.
398 kes Add Swedish sv.po file
400 kes Don't print clock skew message in FD if less than 3 seconds diff.
401 kes Add a bit of VSS info to status client.
402 kes Implement a first cut of Vista VSS, using Win2003 code.
406 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
407 loaded tape but uses first drive).
408 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
409 This was indeed a Win32 issue.
411 kes Simplify search of autochanger for in-use Volume.
412 kes Fix exit condition of check for in-use volume. kes Remove
413 inappropriate my_postgresql_free_result() in db_close()
415 kes Fix bad return in FD when encryption signature not found.
416 Probably caused a crash.
417 kes Inhibit missing encryption signature error messages for
418 file types where no signature computed.
419 kes Correct inverted check on autochanger in reservation system.
420 kes Tweak debug code in autochanger reservation.
422 kes Add some additional locking in the cats directory in subroutines
423 that modify packet variables called from batch insert.
424 kes Rework how dcrs are allocated. new_dcr() can now be called
425 with an existing pointer, and it will simply clean it up.
426 This allows the reservation system to test various different
427 devices, and will permit easy device changes.
428 kes A bunch of changes all over to handle new new_dcr() calling
430 kes Work more on the Volume management in the SD. Remember Volumes
431 for tape drives and for autochangers (even virtual disk changers).
432 kes When looking at the Volume list to reserve a drive, handle
433 autochanger names correctly by interating through the changer
434 devices. Also call the Director to see if a Volume is suitable
436 kes Fix some bugs in bscan. Make sure all media records are written.
437 Make sure that valid JobMedia records are written for disk files.
438 Previously they were completely wrong.
439 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
440 that the URLs don't change and so that the developers will all
441 work off the same copy. Rebuild from scrach.
442 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
446 kes Fix seg fault in FD from incorrect digest size.
447 kes Fix argument to non-OpenSSL crypto.c subroutine.
451 kes Remove a few malloc()s from the encryption code.
452 kes Use the class calls to bsock in filed/backup.c and restore.c in
453 place of the old bnet_xxx code.
454 kes Implement code that does an on the fly calculation of the
455 signing digest during restore of encrypted files. It makes
456 a best guess at the algorithm, and if it is not correct, will
457 then revert to the old code which reads the file after it is
459 kes Implement at least one missing crypto stream in stream_to_ascii()
460 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
461 #877 where a reload with bad syntax causes Dir to exit.
463 Cut: 2.1.14 beta (not released)
465 kes Do not free a volume on a tape drive until another volume is
466 mounted and read, or the autochanger unloads the volume.
467 This should help the SD re-use volumes that are already mounted,
468 and should fix bug #886.
469 kes Apply patch from user brettedgar that allows gnome2-console include
470 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
471 kes Apply patch from Lucien Weller that fixes day of week calculation
472 because of DST flag problem. Fixes bug #887.
474 kes Move find_next_appendable_volume() to after acquiring a valid device
475 in reserve.c. This fixes bug #864 -- confirmed by reporter.
477 kes Unable to reproduce bug 872. However added additional testing for
479 kes Bug #874 resolved by documenting SQLite limitations.
480 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
481 kes Bug #881 resolved by removing typo in mtx-changer script.
482 kes Made Frank Sweetser's wiki the official Bacula wiki with his
483 approval. Added a link to the wiki on the web page, and implemented
484 a backup from http://paramount.ind.wpi.edu
486 kes Fix update allfrompool to pass pool name.
488 kes Convert to pure GPL v2 license.
489 kes Fix sscanf problems reported by Peter Buschman that caused
490 a bus error on Solaris.
491 kes Rework (simplify) the select prompt in bat.
492 kes Move get_jobid_from_tid() into lib and create a
494 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
495 should definitely fix the problem of lost error messages in the
497 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
498 kes Eliminate tcpd.h from the project. Enclose the #include from the
499 library with extern C ...
500 kes Add print of signal name when a signal is trapped.
504 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
506 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
507 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
508 makes SQLit3 run 30 times faster, though a bit less safe.
509 kes Implement --with-batch-insert in configure and detection of thread
510 safe libraries. It is on by default, but turned off if no thread
511 safe library (e.g. SQLite 2) is available.
513 kes Fix Bacula PostgreSQL buffer overruns.
514 kes Do better checking for NULL results returned from PostgreSQL;
515 implement retry for failed queries; clear results buffer after
516 failed query. Hopefully this will correct the PostgreSQL failures.
518 kes Implement algorithm to handle only one appendable volume with
519 Prefer Mounted Volumes = no.
520 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
521 returned from a query.
522 kes Make volume lock recursive.
523 kes Implement an additional volume reservation algorithm that
524 starts by considering all reserved volumes then uses the
525 old brute force algorithm of searching the resources to
526 find a suitable device.
527 kes Add new reservations debug code and refine the old code.
528 kes Update the win32/dll/bacula.defs file.
530 kes Tweak reservations algorithm to permit a few more cases, i.e.
531 volume reserved, but on different drive, ...
532 kes Enhance SD status to include Pool and Media Type for drive in a
533 more readable format (a bit longer).
534 kes Fix PostgreSQL double free.
536 kes Minor refactoring of restore decryption code.
537 kes Add code to smartall.c to detect double free of a buffer.
539 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
540 so that bsmtp will create a correct email address (mailbox only).
541 kes Modify 'memory' command so that the buffers are listed as 'In use'
542 to avoid confusion with Orphaned buffers.
543 kes I reworked the OpenSSL include/lib flags to be handled in
544 the standard Bacula way, which should fix bug #863 concerning
545 non-standard OpenSSL libraries.
547 kes Implement Help Browser window for bat.
548 kes Fix reload bug that reset StorageId to zero.
550 kes Fix TLS #ifdefing when TLS turned off.
551 kes Ensure that when labelling a tape with Slot=0 that InChanger
553 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
555 kes Add StartTime to final uar_sel_jobid_temp query so that we can
556 add DISTINCT (required by PostgreSQL).
557 kes Implement BSOCK authenticate_director() method. Eventually will
558 authenicate all daemons.
559 kes Move several more functions into the BSOCK class.
561 kes Add code to tell the OS that we no longer need a cached
562 file that we were reading. In findlib/bfile.c. Also,
563 only cache files that we are reading. Thanks to
564 Tobias Oetiker <tobi@oetiker.ch> for the idea.
565 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
566 kes Implement script to automatically generate cats and dll .def
568 kes Update README.mingw32 to include new .def file generation.
569 kes Correct typo in UTF-8 error message as reported by:
570 jhernandez <julianhernandez@gmail.com>
571 kes Add additional sm_check() code on debug level 1.
572 kes Set default debug level to 1.
573 kes Trap SIGABRT in attempt to get traceback.
575 kes Reduce bat connect timeout from 30 to 15 seconds.
576 kes More restructuring and implementing BSOCK class in place of
578 kes Remove a few unnecessary malloc() tests in crypto code.
579 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
580 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
581 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
583 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
585 kes Fix Verify InitCatalog. The attributes were not pointing to the
586 correct saved location.
587 kes Implement message callback so that GUI is sure to get all
588 daemon messages. Currently displayed in a dialog in bat.
589 kes Ignore SIGUSR2 (Bacula timer) in bat.
590 kes Apply regress patch from bug #859 to allow regress to work
591 with Solaris compiler.
593 kes Begin adding TLS support to bat.
594 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
595 clean up lex.c and make it more readable.
597 kes Move more bnet functions into the BSOCK class.
598 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
599 kes Complete change of berrno strerror() method to bstrerror()
603 kes Cleanup incorrect email addresses in bsmtp.
604 kes Make bat display initial messages rather than discard them.
606 kes First cut of adding .mod to the run command.
607 kes Implement auto display of messages in bat.
608 kes Enhanced preferences to allow all Bacula output to be
611 kes Try to make bsmtp date routines more generic.
612 kes Fixed bug #856 autochanger documentation.
613 kes Rework bsmtp date editing for Win32. This fixes bug #854.
614 kes Add new cats entry point so Win32 builds.
616 kes Attempt to fix bsmtp date editing on OSes without %z editing.
618 kes Do better checking for the MySQL 64 bit libraries looking for both
619 .a and .so libraries.
620 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
621 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
622 kes Require the thread safe version of MySQL during configure. Thanks
623 to Andre Noll for pointing this out.
624 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
625 continuing in migration code.
626 kes Apply implementation of tray-monitor font derived from gnome-console
627 submitted by Andreas Piesk <a.piesk@gmx.net>
629 kes Eliminate important memory loss in SQLite
630 kes Fixed the batch insert MySQL thread specific data that was not
631 being freed. See cats/mysql.c:db_thread_cleanup().
632 kes Fix restore before command.
633 kes Convert old hdr.name to name() in a few places.
634 kes Implement update jobid command.
635 kes Return all time_t dates in db_get_job_record()
636 kes Stop watchdog in SD earlier.
637 kes Put Pool just after Storage in please mount message.
638 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
641 kes Update the po files.
642 kes Fix Verify InitCatalog by making it cache attributes.
644 kes Change name bacula-bat to bat for man 1 page to correspond to
646 kes Check for client and store NULL pointers in status command. This
648 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
649 kes Fix sign extended editing of %p.
650 kes Clean out a little old #ifdefing in cats/mysql.c
652 kes If time diff between DIR and FD is more than 600 seconds convert
653 INFO message to WARNING.
654 kes Implement heap size display in status for all daemons.
655 kes Attempt to fix MySQL db open memory loss (not successfull).
656 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
657 kes Eliminate memory loss in MySQL (possibly other SQLs) during
658 Query. This looks like a MySQL but but by doing extra releases,
659 the memory goes away. This should fix bug #847.
661 kes When backup fails, cancel SD before waiting for sd termination.
662 kes If SD is waiting for FD to connect during cancel, wake up the
664 kes Fix fsf code so that errno is correctly reported.
665 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
667 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
668 so that Bacula doesn't later stumble into a seg fault.
669 kes Use the term Restore Client in the restore Job report.
670 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
671 the original job's FileSetId.
672 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
673 spooling in migration jobs. Not yet tested.
674 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
675 reading conf file from a pipe. However, do it with open_bpipe()
676 rather than popen. Not yet tested.
678 kes Fix an ugly bug where the VolCatBytes were getting updated
680 kes Implement bconsole memory command that prints current memory
681 usage, plus smartalloc dump.
682 kes Clarify some error messages in backup, admin, and migrate.
683 kes Shrink label dialog to smaller size.
684 kes Invert Cancel OK buttons on restore to be OK Cancel.
685 kes More strerror() to bstrerror() conversions.
687 kes Start implementing bstrerror() in place of strerror().
688 kes Stripping path -- seems to work.
690 kes Prevent door and port files from being restored (mostly
692 kes Free an unreleased buffer in compat code.
693 kes Change console Job name from *Console* to -Console- to eliminate
694 Win32 filename problems. Put Win32 path separator when creating
695 Console file. This fixes bug #846.
696 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
698 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
700 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
701 to force Win32 error message.
703 kes First cut strip path. The data should be passed to the FD,
704 but nothing is done with it yet.
705 kes Enhance the digest and signature routines in the crypto
706 library to accept a JCR and to use it to print error messages
707 so that they will go in the Job report rather than the daemon's
709 kes Simplify some of the verify signature code.
710 kes Simplify a few of the alternative returns in the signature
713 ebl Use only POSIX regex instead of GNU regex in breg.c for
714 File relocation. It fix broken freebsd compilation.
715 kes Convert all other Dir files to use new ua class message
717 kes Tentative fix for missing digest signature in bug 807.
718 kes Correct handle problem in new win32_ftruncate routine.
719 kes Convert ua_purge.c and ua_update.c to use new ua class
720 message routines for bat.
722 kes Correct incorrect installation of LICENSE in Win32 installer.
723 kes Display LICENSE at the beginning of the Win32 install.
724 kes Attempt to correct the need for the png files to be installed
726 kes Reapply my bat.conf install script in qt-console. I think I
727 editted bat.pro instead of bat.pro.in and it was lost.
728 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
729 the /var/lock/subsys for subsysdir. Also corrects typos in the
732 kes First cut update job.
733 kes Correct configure to include qmake of src/qt-console directory.
735 kes Make restore job yes/mod/no print in one command so GUI works.
736 kes First cut implementing backup and restore client.
737 kes Correct editing in Verify output that caused a seg fault.
739 kes Insure that bat.conf is not overwritten during installation.
740 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
741 while I was implementing migration in March 2006 !
743 ebl Cleanup file relocation, using char *RegexWhere instead of
744 char *where + bool where_use_regexp
745 kes Update some manpages and add bat manpage.
746 kes Make a first cut at converting bacula.spec.in for bwx-console
748 kes Apply patch from John Goerzen to add hostname as fourth argument
749 to make_catalog_backup script.
750 kes Fix typos I introduced into bsmtp.c
751 kes Make pm_strxxx() routines handle input of NULL pointer. This
752 is to protect from NULL pointers returned from SQL databases.
753 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
754 kes Add more debug to FIFO code -- fix fifo regression test.
756 kes Implement posix_fadvise in FD, and for reading spool files in SD.
757 kes Add thread timer to bnet_connect() to break from OS if wait time
760 kes Update Win32 build to include new files, new symbols, and
762 kes Implement socket level heartbeat (tcp_keepidle)
763 ebl Commit File relocation patch
764 kes Make bat have 'make install' target.
765 kes Warn during install if old gnome-console binary found.
766 kes Warn during install if old wx-console binary found.
767 kes Add -8 option to bsmtp command line to add content type utf-8.
768 Fixes bug #809. (Character coding problem in bsmtp).
769 kes If < is found in target (from, to, cc) then do not enclose the
770 target in < > in bsmtp. Fixes bug #772 (malformed address).
771 kes When printing certain items in dbcheck, stop after 300000.
772 Fixes bug #822. (dbcheck loops).
773 kes Incorrect status in Dir after waiting for mount with poll set.
776 kes Extend idea of Prefer Mounted Volumes to mean a volume about
778 kes Print waiting to reserve a device every 5 mins.
780 kes Don't call close_part in label.c if tape and relabel.
781 kes Don't free volume if busy in close() -- should help with
783 ebl Fix #824 RunScript bug (After script could be execute twice)
784 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
785 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
786 Add a regression script to test RunScript
788 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
791 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
792 deprecated. No additional bugs will be fixed, and they will be dropped
793 in a future release (probably 2.4.0).
794 kes Change name of wx-console to bwx-console to make it more Bacula
796 kes Change the name of gnome-console to bgnome-console to make it
799 kes Some time in March, a Feature Request with patch from Jorj Bauer
800 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
802 The ability for the director to validate a Client (FD) CN against
803 an arbitrary set of patterns rather than the hostname, with
804 A new 'TLS Allowed CN' set of directives which are implemented
805 in the Client resource. Then pattern matching is used in place
806 of hostname matching against the Certificate's CN. As an example, we
807 have certificates which (a) use a local CA, and (b) have a CN of the
809 kes Add new/changed entry points to Win32 build
810 kes Create unaccepted-projects for projects that are not accepted.
811 kes Simplify locking in the reservations system.
812 kes Add more debug code in reservations.
813 kes Make sure error condition on reserving a volume is handled correctly.
814 kes Correct handling of volume_in_use.
815 kes Correct handling of initializing a device.
816 kes Move handling of broadcasting releasing a device into release_device().
817 kes Correct attaching dcr to dev so that it is only done if device
818 is properly initiated.
820 kes Locking debug level tweaks in SD.
821 kes Tweak new Volume code.
823 kes Add exec external-command [wait-seconds] to bconsole. This
824 executes the external-command. Note! normally external-command
825 should be enclosed in double quotes.
826 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
827 it should normally be off in a production system.
829 kes Implement die command for SD so that we can force it to dump.
830 kes Implement SD lock debug code.
831 kes Implement new algorithm for keeping Volume list in SD. It
832 is now owned by the device.
834 kes Implement new code for freeing in use volumes that should
835 resolve if not all, some of the problems of multiple drive
836 tape conflicts described in bug 801.
838 kes Fix gui/bacula-web/images files in svn.
839 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
841 ebl Fix a bug in batch mode (in string escape)
842 kes Correct migration prune SQL typo that crept in in a
845 kes Move bnet_despool() into class in bsock.c
846 kes Modify job report to include director name and Build OS.
847 kes Move drop root privilege and check_catalog() before fork.
848 kes Add update database scripts (version 9 to 10) to updatedb directory.
850 ebl Check size and age of each file after its backup to see if
851 it has changed during backup, if 'checkfilechanges' is set.
852 The FD will do an extra check (stat(2)) after
853 each file backup. mtime, ctime and size are compared with
854 'before backup' information. If time or size mismatch, an
855 error message will be generated. You must upgrade FD to use it.
857 kes Make database name and user configurable
858 --with-db-name=xxx --with-db-user=xxx
859 kes Add back database type to message.c for debugging.
861 kes Implement dir_sql() which issues an SQL query.
862 kes Modify bat medialist to use dir_sql() and do some minor C++
863 formatting as well as eliminating a number of pointers, simplifing
866 kes Fix some of the mtx-changer grep commands for tape label readers.
867 kes Convert a number of bsendmsg into the appropriate send/warning/error
869 kes Suppress the using database message in the .sql command.
870 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
872 kes Add context menu for floating a window.
873 kes Some minor cleanup and name changes in qt-console
874 kes Add doing mt setblk 0 in Win32 mtx-changer.
875 kes Apply Martin's bug fix to move definition of ENODATA for
877 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
880 kes More pruning cleanup.
881 kes Turn on wait_for_drive by default in mtx-changer.
882 kes Turn on Batch insert code by default as it now passes regression.
883 kes Add ./configure --enable-bat to enable building of Bat.
884 No install yet though.
886 kes Implement a new .sql command for bat.
887 kes Implement code to turn off pruning in obtaining the next volume.
888 Pruning is turned off for the status dir command, but turned on
889 for SD requests and for the list nextvolume command.
891 kes Correct Qmsg() that was not updated correctly when committing a
892 previous change (probably the recent TLS patch).
894 kes Write new subroutine is_volume_purged() that explicitly checks
895 if the Volume is purged, and if so marks it as such. This should
896 resolve problems reported about needing to mount twice to recycle
898 kes Rewrite pruning algorithm to do more work in the SQL engine, and
899 to pass a list of JobIds to be deleted to SQL. Also, minimize the
900 amount of duplicated code.
901 kes Do volume pruning only for the Media Type desired (reduces pruning time
902 if multiple Media Types are in the same pool).
903 kes Implement more detailed info in the Job report for the Bacula version
905 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
907 ebl Add bbatch tool to bench database and insert mode.
908 Fix sql quote stuff in batch mode
909 Fix sql stuff for mysql
911 kes Correct problems with am/pm scheduling. Fixes bug #808.
912 kes Implement new prunning code that prunes up to 1000 jobs at
913 the same time. The same technique can be applied to a number
914 of other prune/purge subroutines.
915 kes Add an insanity check when starting a new tape job to ensure
916 that the tape position has not been changed. If so fail the
918 kes Fix Win32 build for dlls to add the folllowing:
919 src/lib/bsock.c -- new file with new entry points
920 src/lib/dlist.c -- new entry points
921 src/cats/sql_create.c -- new entry point
922 src/cats/sql_cmds.c -- new DATA item exported
924 ebl batch mode cleanup bscan-test is ok now.
925 kes Implement SD code to check length of disk volume before appending.
927 kes Correct return status on db_batch... routines.
928 kes Add call to db_write_batch_file_records() to migration code.
929 ebl Fix AfterJob timing
930 kes Move the checking of the database in initializion of the Director
931 to after we drop privileges. This avoids the need for both root
932 and bacula access to the DB.
933 kes Correct a misplaced variable definition in src/filed/backup.c
934 kes Correct how the new batch insert db_create_attributes_record()
935 uses the arguments. Caused a seg fault in bscan.
936 kes Implement lock() and unlock() methods in DEVICE class.
937 Implement block() and set_block(xx) methods in DEVICE class.
938 kes Modify bnet_connect() so that it uses time() to check for the
939 wait time expiring (on some OSes, some system calls may not
941 kes Modify Verify to obtain the previous JobId when it is actually
942 running rather than at schedule time (as it was in 1.38.x).
943 kes Fix src/job.c to handle MaxWaitTime correctly. This should
945 kes When checking pid in pid file, continue running if the pid is
946 the same as ours. This occurs on IRIX after a system crash.
949 kes Extend new GUI API.
950 kes Make the ua structure a class, and implement send_msg(),
951 error_msg(), warning_msg(), and info_msg().
953 kes Apply fix from for building wx-console on the Mac from
955 kes Implement new select mechanism for GUI programs.
956 kes Reorganize initialization of stackedWidgets in bat.
958 kes Add updated nagios plugin supplied by Christian Masopust.
960 kes More bat implementation.
961 kes File migrate bug with Pool Occupancy using mediaid instead
962 of jobids. Fixes bug #795.
963 kes Fix orphaned buffers in filed backup and verify due to
964 crypto buffers not freed during errors. Fixes bug #789.
965 kes Extend new GUI api code to tree commands.
966 kes Ensure that tree and dot commands check console ACLs.
967 kes Permit marking directory with trailing slash.
968 kes Allow 20 console connections (instead of only 10).
970 kes Add smartctl call to bacula-sd.conf as an example of getting
973 kes Modify jobq.c to let simultaneous restore jobs run. This may
974 cause them to fail if they cannot get a drive.
975 kes Add Client Connect Wait to Storage daemon to permit users to
976 modify the time the SD waits for a FD connection.
978 kes Correct virtual changer check which was backwards. This caused
979 volumes to be unloaded into slots already occupied.
981 kes Apply Command ACL filter to JobId list in restore command.
982 kes Correct typeo in var.c patch.
984 kes Don't let Bacula prune File or Job records for the current Job.
985 kes Fix variable substitution pad + inc bug reported (with patch)
988 kes Correct SQLite log table index as reported by Luca Berra.
990 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
992 kes Begin implementing new comm signals for API.
993 kes Fix a few places in lib/message.c where the open fd may
995 kes Continue implementing lib/bsock.c (real class). Make jcr,
996 who, host, and port private. There are new methods to access
997 them for non-class use. This required touching a number of files.
999 kes Add LANG=C to autoconf/randpass so it works with languages other
1000 than English. Fixes bug #788.
1002 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1004 You will not be able to generate Include/Exclude list any more.
1005 It will be fixed soon.
1006 If you want to use this, you can apply
1007 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1009 kes Restore of sockets created false error messages because Bacula
1010 no longer restores sockets, but the code was still trying to
1011 set the attributes on a non-existent file. Reported by a user.
1012 ebl finish RecyclePool feature
1013 Media will takes Pool.RecyclePool
1014 when moving from Scratch to a Pool or when user will do
1015 update volume=xxx frompool
1016 To use it, add RecyclePool = aPool to your Pool resource
1019 RecyclePool = Scratch
1023 kes Expand new BSOCK class adding signal() and new BNET signals.
1024 kes Begin enhancing the dot commands adding a new API function
1025 that returns more information and will make it easier
1026 to interface to the Director from a program.
1028 kes Make DEVICE fd private. Its new name is m_fd, and can be
1029 obtained with dev->fd() outside the class. This is the
1030 first of many DEVICE members to be made private.
1031 kes Implement Michael Renner's idea on having a virtual disk
1032 changer. I made some minor modifications (e.g. I did not
1033 implement the Virtual Changer directive, but simply set
1034 the Changer Command to an empty string.
1036 kes Implement a BSOCK send() method that writes the whole record
1037 in a single write() request rather than in two.
1038 ebl add update volume=xxx recyclepool=yyyy
1039 volume takes recyclepool from pool when using update volume=xxx from pool
1041 kes Fix encryption deblocking bug, which caused some restored files
1042 to be truncated. This fixes bug #763.
1043 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1044 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1046 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1047 ebl Use btime_t instead of uint64_t in media patch.
1049 kes Optimize the use of the database a bit in the Status dir command.
1050 Only open it when needed, ensure that if any previous database
1051 was opened, it is closed.
1053 kes Correct VolCatBytes bug from media patch.
1054 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1055 in the case of orphaned records.
1056 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1057 and File records in 300K chunks to be more efficient. This
1058 idea came from Juan Luis Frances (if I remember right).
1059 kes Apply Eric's scratch patch that moves a purged Volume to
1060 the RecyclePool. Question: how is RecyclePool set? what
1061 happens to the ScratchPool?
1062 kes Apply Eric's media patch that collects read/write media
1063 times as well as byte counts. This patch requires a
1064 simultaneous upgrade of the DIR and SD. Note, there
1065 should be some way to turn off timing. I'm not sure
1066 times are in Bacula units.
1067 kes Apply Eric's batch-insert patch.
1069 kes Update projects list.
1071 kes Implement Include/Exclude file lists in FD as dlists using
1072 the new dlistString class. This permits efficiently having
1073 large include/exclude lists and completes project Item 25.
1074 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1075 console is authorized to cancel the job. This fixes bug
1077 kes Modify SD so that the VolCatJobs medium record is updated
1078 at the beginning of a Job rather than the end. This
1079 fixes bug #775 where exceeding MaxVolJobs caused jobs
1081 kes Added a mutex around getting and setting Volume information
1082 so that multiple simultaneous jobs will single thread.
1084 Switch to using Subversion
1085 kes Remove src/pygtk-console/ from configure
1087 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1088 plus the entrypoints.
1089 kes Apply patch supplied that corrects debug print
1090 in canceling jobs for max run time. Supplied as
1091 part of bug #621, which was previously fixed.
1093 kes Test on job_canceled() and sd_msg_thread_done inside
1094 loop starting the message thread to avoid a race condition.
1096 kes Remove rl_catch_signal from console.c as it conflicted
1097 with the header definition. Fixes bug #765.
1098 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1100 kes Clarify some stored/acquire messages to indicate if the
1101 problem is with read or append.
1103 kes Fix memory leak with storage ids in cats/sql_get.c
1104 kes Terminate watchdog earlier to avoid reference to released
1105 memory -- reported by Jason Austin.
1106 kes Move closing the database from jobq.c to the director daemon
1107 termination routine. This fixes memory leaks for shadow jobs
1108 (i.e. migration jobs).
1109 kes Free up the unique jobid chain items in migrate.c. This fixes
1110 a memory leak problem.
1111 kes Convert some ugly looking for statements to use foreach_alist
1112 in findlib/find.c. This will facilitate converting the structures
1113 to use dlist (for large include/exclude lists).
1114 kes Fix a bug in the btree.c and btree.h routines, then rename them
1115 rblist and add them to be built in src/lib. Include some new
1116 methods written by Rudolf Cejka that make the code more readable
1117 (hides some of the ugly casting).
1118 kes Add set_next() and set_prev() methods which make the code much more
1119 readable. Also add a new dlistString class that facilitates storing
1120 strings in dlists. To be used in the large include/exclude lists.
1121 kes Make some trivial modifications to lib/tree.h that use rblist
1122 rather than dlist for storing the tree links. This was suggested
1123 by Rudolf Cejka. The result of this is that the restore tree now
1124 uses red-black binary trees rather than simple linked lists. This
1125 should give rather dramatic speed improvements for directories
1126 contining large numbers of directories/files (more than 10000).
1128 kes Fix maxruntime bug #621.
1130 ebl Implement the include JobID in spool file name project.
1131 kes Reorder projects file in order determined by Jan 2007 vote.
1132 kes Implement item #12 on project list -- quick release of FD by
1134 kes Fix open of SQLite3 db where user does not have write permission
1135 so that DIR does not crash. Fixes bug #761.
1137 kes Add back missing @ in Win32 Makefile.
1138 kes Change 'Device not configured to autolabel' from INFO
1140 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1141 which should restart an indefinite # of times.
1142 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1143 other DIR specifications.
1145 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1146 Fix path quoting in SQLite scripts.
1147 Fix problems with SHGetFolderPath.
1149 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1151 kes Fix Job restart on error bug that promotes an Inc to a Full
1152 backup. This should fix bug #755.
1153 kes Add qt-console and first cut of code.
1157 kes Fix Bacula->Documentation link on Win32 to point to index.html
1158 instead of bacula.html. Fixed bug #750.
1159 kes Return JobId in db_get_job_record() when JobId==0. This should
1161 kes Do not release source pointers when restarting a failed job.
1163 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1164 This *should* fix bug #747.
1165 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1168 kes Modify USTORE constructor to set an empty store_source string,
1169 and don't copy the store_source string in a cancel. Hopefully
1170 this will fix Arno's seg fault, bug #744.
1171 kes Add back code to disable conio in configure. Fixes bug #743.
1172 kes Correct the Options scanner in the FD to correctly handle
1173 SHA1 option, which was eating the next option. Reported by
1175 kes Add code to indicate when the SD is spooling, spool wait, and
1176 despooling as requested by Alan Brown.
1178 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob