1 Technical notes on version 2.3
6 kes More tweaks to the mount volume routines to get everything
7 right. Changed variable name from find to have_vol, which is
8 much easier to understand.
9 kes Enhance btimer debug code.
11 kes Fix FD->SD authorization failure, which was due to spurious
12 wakeups from a pthread_cond_timedwait(). Simply check the
13 predicate before continuing. This fixes bug #953
14 kes Add const char where needed (more to do). Remove temp debug code.
16 kes Setup SQLite busy handler before doing queries.
17 kes Don't overwrite error message in check_tables_version.
18 kes Unlock batch insert tables with same calls used elsewhere.
19 kes Allow starting 59 jobs a second.
20 kes Make SD session key more random.
21 kes Add retry for SQLite opening db if it fails.
22 kes Suppress extra error messages during batch insert failure.
23 kes Add jcr to timer packets so if killed message can be sent to job.
24 kes Add JobId to all Dmsg() output.
25 kes Put some FD auth code on dbglvl rather than fixed.
26 kes Return insert attributes error message in db msg buffer to avoid
28 kes Separate batch init error messages.
29 kes Make SD code that contructs attribute insert check string lengths
31 kes If Dir gets an error during inserting attributes, cancel SD.
32 This reduces unnecessary error messages.
34 kes Correct search boolean for getting Volume info
35 ebl Cleanup batch code.
36 kes Back out one small change to the reservation system (reserving a volume).
37 kes Rework how a Volume is mounted. It is now much more intelligent and
38 will always attempt to use any mounted volume if possible and reduces
39 calls to the Director asking about volumes.
41 kes Turn off some code when batch insert not enabled.
42 kes Edit FD name in connect error messages.
43 kes Rework the reservation system to take into account that the Director
44 might give us a Volume that is different from the current one being
45 used, and to ensure that we don't exceed Maximum Volume Jobs.
46 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
47 fatal error with multiple jobs running'
48 kes Add more debug code in reservation system.
49 kes Implement maxvol-test to check bug #947.
51 kes Add code to handle tray monitor separated from Win32 FD.
52 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
54 kes Add missed return in fixing verify bug -- trunk only.
55 ebl Fix a command parser issue causing a director segfault.
56 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
58 kes Increase the max block size to 4MB fixes bug #957.
59 kes ERABT if user sets min block size > max block size. Fixes bug #956.
60 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
61 is not properly mounted (recognized) during a poll.
62 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
63 Job that has differences reports Verify OK.
64 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
66 ebl Add an option to operate on all pools with update vol parameters.
67 This complete the project 20. Patch from Nigel Stepp.
68 ebl Add history support to bconsole when using readline.
69 Using Ctrl-D to exit doesn't update .bconsole_history
70 kes Modify new volume algorithm to use max MediaId for generating next
71 volume number rather than the count of Volumes. This should essentially
72 eliminate the failure rate if some volumes were deleted. Bug #921.
73 kes Begin implemention of Optimize Job Scheduling.
74 kes Implement restore callback that Dirk and I agreed on for bat
75 restore. This fixes bug #928. Restore of backup of zero files fails.
76 kes Fix SQL Catalog logging which broke with new db_escape_string
79 kes Fix bacula_cats.def for new db_escape_string().
80 kes Increase size of name string when FD making connection to SD.
81 May fix bug #953. FD->SD connection failure.
83 kes Add code to help Dan debug 2drive-incremental-2disk test.
84 kes Add code to try to fix bug #908.
85 kes Add waits to multiple exit detection code to try to force pid
86 file to always be deleted.
87 kes Restore good dev.tar.gz to rescue set appropriate binary property.
89 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
90 trying to switch drives by checking for blocking before unblocking.
92 kes Cancel storage daemon in all cases where FD reports error. This
93 should fix virtually all cases of bug #920.
94 kes Fix db_escape_string() for MySQL which did not compile.
96 kes Fix error message that was clobbered when Dir tells SD it does not
97 have write permission on Volume. This should fix a minor point
98 in bug #942, but not the main problem.
99 kes Add code to cancel job in SD if FD connection fails. This should
101 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
102 dvl Pass jcr and db into db_escape_string() to enable better escaping
104 kes Fix migration code to get correct Volume name with multiple volumes
105 by skipping |. Fixes bug #936.
106 kes Implement patch supplied by Landon to fix bug #944 where using
107 TLS with bconsole uses 99+% of the CPU.
108 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
110 kes Move patches into patches directory.
112 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
115 ebl Using "m" in bconsole will show messages like before,
116 and not memory usage.
117 kes Fix bug #935, and probably also bug #903 where files were not
118 restored. MediaId was not properly set in JobMedia record after
121 kes Suppress chown and chmod error messages if the FD is not running
124 kes Apply Martin Simmons' patch that should turn off the new API usage
125 when batch insert is turned off allowing building on older
127 kes Add ./configure search in qwt-qt4 for qwt package
129 kes Bacula is now free of 3rd party GPL copyrighted code!
131 kes Add guid_to_name.c/h which replace idcache.
132 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
134 ebl Detect if new PosgreSQL batch insert API is present.
135 kes Correct incorrect mempool call causing Director crash. Occurs on
136 systems without va_copy().
137 sb Update spec files for 2.2.1 release
139 kes Fix memory pool call in ua_output.c. bug #934.
140 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
141 Add test program to fnmatch.c
143 kes Integrate patch to README.vc8 from
144 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
145 edit it to get it into Unix patch format.
146 kes Implement mkpath.c to replace old FSF makepath.c
148 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
150 Release Version 2.2.1
152 kes Update POTFILES.in
153 kes Cleanup a few underquoted AC_DEFUNs in configure
154 kes Apply patch from Martin Simmons that adds a test for va_copy to
157 kes Fix bug #921 by increasing the number of tries to create a new volume
159 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
160 can be called multiple times. Implement a version for machines
161 without va_copy() that gets a big buffer.
163 kes Integrate more portable zone offset code into bsmtp.c
164 Submitted by Attila Fülöp.
166 kes Fix bad SD->FD return status reported by
167 (James Harper) <james.harper@bendigoit.com.au>
168 ebl Fix a bug in read_close_session which return random status
169 thanks to James Harper
171 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
172 and directory names during restore of single file/directories.
173 kes Add sanity checks to .sql command when string is empty. Hopefully
174 that will resolve Dirks Director crash.
176 kes Apply patch submitted by Martin Simmons that corrects a seg fault
177 in the bsmtp chat subroutine when debug is >= 10.
179 kes Fix Director crash when running bat SQL queries.
180 kes Add David's notes on Item 8: Copy pools.
182 kes Rework projects file to be current and ready for a vote.
183 kes Enhance lex scanner error message.
185 kes Tweak LICENSE file to mention BSD code.
186 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
187 if specified on the ./configure.
188 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
189 This class is intended to allow us to open a second bsock to the
190 Director while in the restore subdialog.
192 kes Fix configure to create bat Makefile before creating dependencies.
193 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
194 kes Add a tooltip to the tray monitor.
195 dvl Set the Director's PID file before dropping privs. This fixes
198 kes Update AUTHORs file
199 kes Increase the default max concurrent jobs to 20 in FD and SD to
200 correspond with the default .conf files.
201 kes Rewrite the Win32 service routines. This eliminates the 3 copies
202 some different, of the same file created by RN when porting the
204 kes Rearrange some of the Win32 directories and the placement of the files
206 kes Set DEVELOPER flag in version.h
208 ========================================================================
209 Release Version 2.2.0
211 kes Apply a second doc patch from Marc.
212 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
213 improves the tips section that discusses how to setup multiple
216 kes Update bat README file.
217 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
218 corrects a typo in the Recycle status check in db_find_next_volume().
219 This will probably fix a number of annoying problems with multiple
221 kes Modify most of dird/msgchan.c to use bsock class calls rather than
222 bnet calls -- no functionality change.
224 kes Modify the Verify output to specify if files are missing on
225 the Volume(s) or disk. Fixes confusion in bug #916.
226 kes When more than one Volume is read in a migration job, the last
227 Volume bytes reported are from the last read volume rather than
228 the last written volume. Fixed. This fixes bug #910.
229 kes Fix display of Recycle flag after update volume=foo recycle=yes.
230 It previously printed New Recyle flag is: no. This fixes bug
233 kes Correct seg fault when switching tape drives during restore.
234 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
235 be used until after 2.2.0 release.
237 kes Remove fnmatch() in SD that permitted wild card specifications.
240 kes Fix %g in filename returned by SQL for browse tree reported by
242 kes Fix configure so that it puts config.out in the cwd rather than
244 kes Attempt to fix the locking problem reported by Eric in bug #906.
245 kes Make berrno class to leave errno unchanged after constructor call.
246 kes Make bnet_server use the heap rather than the stack to allocate
247 its socket fd pointers to avoid a crash at termination. Problem
248 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
250 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
251 and putting it in depkgs-qt along with Qt4.3.
253 kes Rework code in acquire.c that switches drives for reading when
254 the Media Type does not match. This should fix bug #906
256 ebl Fix a director segfault during job setup #907
257 kes Correct seg fault in postgresql when first operation returns no
258 rows. Fixes Dirks File browser problem seg fault with bat.
260 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
261 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
264 kes Implement PopUp YES/NO dialog for bat.
266 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
268 kes Correct RunScript to terminate job in FD on failure.
269 kes Change abort_on_error and AbortJobOnError to fail_on_error
270 and FailJobOnError in RunScripts.
271 kes Minor tweaks of code formating in RunScripts, principally to
272 avoid depassing 80 columns.
274 kes Eliminate one #ifdef Win32 in bsmtp
275 kes Implement grow tool to grow a file for testing very large databases.
276 kes Add big-vol-test to test Bacula seeking with > 5GB.
279 kes Modify find_next_volume() to return all values in Media record.
280 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
284 kes Update Release notes
286 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
287 Warning, in previous beta version, all media get from scratch keep their
290 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
291 This should fix bug #842. Made a note to look at removing the temp
292 files at the end of the install.
293 kes Add ability to mount and unmount a file device providing it is
294 marked as being removable and has the appropriate mount and unmount
295 commands defined in the Device resource. This fixes bug #830.
296 kes When applying a storage override, release all previous storage
297 definitions rather than just prepending the new storage.
298 This should prevent a good deal of confusion.
300 kes Implement ./configure search for qwt libraries.
302 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
303 Win32 FD. This should fix bug #893.
304 kes Remove an unnecessary beep in Win32 init code.
305 kes Update copyright dates in Win32 executable about boxes.
306 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
307 code with a BSD getopt.c and getopt.h.
308 kes Remove sched.h from the Win32 compat directory -- not used.
309 kes Remove the Exit menu item from the Win32 tray monitor. If you really
310 need to shut it down, do it through the services panel or the command
312 kes Remove some inappropriate Bacula FSFE copyrights.
313 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
314 kes Fix regress config non-portable test as pointed out by
315 Florian Heigl <florian.heigl@gmail.com>
316 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
317 as pointed out by Florian Heigl <florian.heigl@gmail.com>
319 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
320 Reported by Frank Sweetser.
324 kes Fix client-only build.
325 kes Integrate client-only fixes for bsys (initgroups) and conio from
326 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
327 kes Make arguments to get_scratch_volume() in same order as other
329 kes Rework the prune_volumes() subroutine so that after purging and
330 no volume found in desired pool, it will check for a scratch
331 volume. This prevents recycling the whole scratch pool.
332 kes Add code to status storage to print boffset_t (largefile support).
334 kes Move qwt (Graphics libarary for Qt4) to depkgs.
335 kes You now need a --with-qwt=<dir> to be able to build bat.
336 kes Update src/win32/cats/bacula_cats.def to include the new
337 db_get_query_dbids() call on Win32.
339 kes Correct a problem when selecting a scratch volume and moving
340 it to another pool that lost some columns.
341 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
342 kes Enhance Autochanger error messages to include Volume and device name.
343 kes Rework prune_volumes() code to take account of InChanger flag,
344 and to handle recycling volumes going to the Scratch pool and
345 current pool because the RecyclePool directive.
346 kes Implement a better and more efficient db_get_query_dbids() to
347 handle creating and passing back a list of DBIds.
351 kes Start work on new more efficient DBId subroutine. First use
352 will be for recycling volume to Scratch inchanger.
353 kes Increase number of JobIds in pruning from 1000 to 10000.
354 This to be replaced by above routine.
355 kes Begin implementation of building Qt4 on Win32.
356 kes Correct typo in fix I added for bad TLS shutdown.
357 kes Pull 2.0.3 patches into patches directory.
358 kes Update Release notes. Include qt-console in line count.
359 kes Update Projects file.
361 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
362 bug in migration code where a job that spanned two volumes
365 kes Implement new BST_DESPOOLING blocked state. Change from locking
366 during despooling in SD to blocking. This means that other threads
367 can work with the device structure, in particular the reservations
368 system while despooling.
370 kes Fix return in reservation message queue that missed clearing
371 the jcr lock (implemented 26Jun07 below).
372 kes Rename a number of dev methods to make locking function names
374 kes Document locking in lock.c. Move lock structures to new file
377 kes Move reservations message lock to lock jcr only this
379 kes Move main SD locking code into lock.c (new file).
380 kes Update Win32 build to include lock.c
384 kes Dirk committed the qwt library code for drawing graphs in bat.
385 kes Tweak install of qwt so that it is integrated with ./configure.
387 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
388 out by Eric (my typo).
389 ebl Fix configure.in to get batch mode enable
390 kes Return correct string from authenticate.cpp in bat when connecting
392 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
393 spurious line drops when using TLS.
394 kes Do not file reparse points when restoring a file that already
397 kes Implement Windows reparse points -- similar to directories, but
398 we do not descend into it. This is a first cut. They seem to
399 be backed up, but restore is not yet tested.
400 kes Remove restore_blocking in tls code when shutting a socket to leave
401 it in blocking mode. Hopefully this will fix the encryption bug
402 reported by Frank Sweetser.
403 kes When opening a file for backup, tell the OS that we are going to
404 read it sequentially -- optimization.
405 kes Change variable names in authenticate_director() to not conflict
406 with member names in bat. Caused great confusion with compiler,
409 kes Queue openssl error messages in case of comm problem.
410 kes Do shutdown() call if socket terminated.
411 kes Remove some duplicated code in tls.c
412 kes Move more of the bsock member variables into private and access
414 kes Add Frank Sweetser's tls-test to the regression suite.
416 kes Add Swedish sv.po file
418 kes Don't print clock skew message in FD if less than 3 seconds diff.
419 kes Add a bit of VSS info to status client.
420 kes Implement a first cut of Vista VSS, using Win2003 code.
424 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
425 loaded tape but uses first drive).
426 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
427 This was indeed a Win32 issue.
429 kes Simplify search of autochanger for in-use Volume.
430 kes Fix exit condition of check for in-use volume. kes Remove
431 inappropriate my_postgresql_free_result() in db_close()
433 kes Fix bad return in FD when encryption signature not found.
434 Probably caused a crash.
435 kes Inhibit missing encryption signature error messages for
436 file types where no signature computed.
437 kes Correct inverted check on autochanger in reservation system.
438 kes Tweak debug code in autochanger reservation.
440 kes Add some additional locking in the cats directory in subroutines
441 that modify packet variables called from batch insert.
442 kes Rework how dcrs are allocated. new_dcr() can now be called
443 with an existing pointer, and it will simply clean it up.
444 This allows the reservation system to test various different
445 devices, and will permit easy device changes.
446 kes A bunch of changes all over to handle new new_dcr() calling
448 kes Work more on the Volume management in the SD. Remember Volumes
449 for tape drives and for autochangers (even virtual disk changers).
450 kes When looking at the Volume list to reserve a drive, handle
451 autochanger names correctly by interating through the changer
452 devices. Also call the Director to see if a Volume is suitable
454 kes Fix some bugs in bscan. Make sure all media records are written.
455 Make sure that valid JobMedia records are written for disk files.
456 Previously they were completely wrong.
457 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
458 that the URLs don't change and so that the developers will all
459 work off the same copy. Rebuild from scrach.
460 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
464 kes Fix seg fault in FD from incorrect digest size.
465 kes Fix argument to non-OpenSSL crypto.c subroutine.
469 kes Remove a few malloc()s from the encryption code.
470 kes Use the class calls to bsock in filed/backup.c and restore.c in
471 place of the old bnet_xxx code.
472 kes Implement code that does an on the fly calculation of the
473 signing digest during restore of encrypted files. It makes
474 a best guess at the algorithm, and if it is not correct, will
475 then revert to the old code which reads the file after it is
477 kes Implement at least one missing crypto stream in stream_to_ascii()
478 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
479 #877 where a reload with bad syntax causes Dir to exit.
481 Cut: 2.1.14 beta (not released)
483 kes Do not free a volume on a tape drive until another volume is
484 mounted and read, or the autochanger unloads the volume.
485 This should help the SD re-use volumes that are already mounted,
486 and should fix bug #886.
487 kes Apply patch from user brettedgar that allows gnome2-console include
488 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
489 kes Apply patch from Lucien Weller that fixes day of week calculation
490 because of DST flag problem. Fixes bug #887.
492 kes Move find_next_appendable_volume() to after acquiring a valid device
493 in reserve.c. This fixes bug #864 -- confirmed by reporter.
495 kes Unable to reproduce bug 872. However added additional testing for
497 kes Bug #874 resolved by documenting SQLite limitations.
498 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
499 kes Bug #881 resolved by removing typo in mtx-changer script.
500 kes Made Frank Sweetser's wiki the official Bacula wiki with his
501 approval. Added a link to the wiki on the web page, and implemented
502 a backup from http://paramount.ind.wpi.edu
504 kes Fix update allfrompool to pass pool name.
506 kes Convert to pure GPL v2 license.
507 kes Fix sscanf problems reported by Peter Buschman that caused
508 a bus error on Solaris.
509 kes Rework (simplify) the select prompt in bat.
510 kes Move get_jobid_from_tid() into lib and create a
512 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
513 should definitely fix the problem of lost error messages in the
515 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
516 kes Eliminate tcpd.h from the project. Enclose the #include from the
517 library with extern C ...
518 kes Add print of signal name when a signal is trapped.
522 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
524 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
525 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
526 makes SQLit3 run 30 times faster, though a bit less safe.
527 kes Implement --with-batch-insert in configure and detection of thread
528 safe libraries. It is on by default, but turned off if no thread
529 safe library (e.g. SQLite 2) is available.
531 kes Fix Bacula PostgreSQL buffer overruns.
532 kes Do better checking for NULL results returned from PostgreSQL;
533 implement retry for failed queries; clear results buffer after
534 failed query. Hopefully this will correct the PostgreSQL failures.
536 kes Implement algorithm to handle only one appendable volume with
537 Prefer Mounted Volumes = no.
538 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
539 returned from a query.
540 kes Make volume lock recursive.
541 kes Implement an additional volume reservation algorithm that
542 starts by considering all reserved volumes then uses the
543 old brute force algorithm of searching the resources to
544 find a suitable device.
545 kes Add new reservations debug code and refine the old code.
546 kes Update the win32/dll/bacula.defs file.
548 kes Tweak reservations algorithm to permit a few more cases, i.e.
549 volume reserved, but on different drive, ...
550 kes Enhance SD status to include Pool and Media Type for drive in a
551 more readable format (a bit longer).
552 kes Fix PostgreSQL double free.
554 kes Minor refactoring of restore decryption code.
555 kes Add code to smartall.c to detect double free of a buffer.
557 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
558 so that bsmtp will create a correct email address (mailbox only).
559 kes Modify 'memory' command so that the buffers are listed as 'In use'
560 to avoid confusion with Orphaned buffers.
561 kes I reworked the OpenSSL include/lib flags to be handled in
562 the standard Bacula way, which should fix bug #863 concerning
563 non-standard OpenSSL libraries.
565 kes Implement Help Browser window for bat.
566 kes Fix reload bug that reset StorageId to zero.
568 kes Fix TLS #ifdefing when TLS turned off.
569 kes Ensure that when labelling a tape with Slot=0 that InChanger
571 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
573 kes Add StartTime to final uar_sel_jobid_temp query so that we can
574 add DISTINCT (required by PostgreSQL).
575 kes Implement BSOCK authenticate_director() method. Eventually will
576 authenicate all daemons.
577 kes Move several more functions into the BSOCK class.
579 kes Add code to tell the OS that we no longer need a cached
580 file that we were reading. In findlib/bfile.c. Also,
581 only cache files that we are reading. Thanks to
582 Tobias Oetiker <tobi@oetiker.ch> for the idea.
583 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
584 kes Implement script to automatically generate cats and dll .def
586 kes Update README.mingw32 to include new .def file generation.
587 kes Correct typo in UTF-8 error message as reported by:
588 jhernandez <julianhernandez@gmail.com>
589 kes Add additional sm_check() code on debug level 1.
590 kes Set default debug level to 1.
591 kes Trap SIGABRT in attempt to get traceback.
593 kes Reduce bat connect timeout from 30 to 15 seconds.
594 kes More restructuring and implementing BSOCK class in place of
596 kes Remove a few unnecessary malloc() tests in crypto code.
597 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
598 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
599 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
601 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
603 kes Fix Verify InitCatalog. The attributes were not pointing to the
604 correct saved location.
605 kes Implement message callback so that GUI is sure to get all
606 daemon messages. Currently displayed in a dialog in bat.
607 kes Ignore SIGUSR2 (Bacula timer) in bat.
608 kes Apply regress patch from bug #859 to allow regress to work
609 with Solaris compiler.
611 kes Begin adding TLS support to bat.
612 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
613 clean up lex.c and make it more readable.
615 kes Move more bnet functions into the BSOCK class.
616 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
617 kes Complete change of berrno strerror() method to bstrerror()
621 kes Cleanup incorrect email addresses in bsmtp.
622 kes Make bat display initial messages rather than discard them.
624 kes First cut of adding .mod to the run command.
625 kes Implement auto display of messages in bat.
626 kes Enhanced preferences to allow all Bacula output to be
629 kes Try to make bsmtp date routines more generic.
630 kes Fixed bug #856 autochanger documentation.
631 kes Rework bsmtp date editing for Win32. This fixes bug #854.
632 kes Add new cats entry point so Win32 builds.
634 kes Attempt to fix bsmtp date editing on OSes without %z editing.
636 kes Do better checking for the MySQL 64 bit libraries looking for both
637 .a and .so libraries.
638 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
639 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
640 kes Require the thread safe version of MySQL during configure. Thanks
641 to Andre Noll for pointing this out.
642 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
643 continuing in migration code.
644 kes Apply implementation of tray-monitor font derived from gnome-console
645 submitted by Andreas Piesk <a.piesk@gmx.net>
647 kes Eliminate important memory loss in SQLite
648 kes Fixed the batch insert MySQL thread specific data that was not
649 being freed. See cats/mysql.c:db_thread_cleanup().
650 kes Fix restore before command.
651 kes Convert old hdr.name to name() in a few places.
652 kes Implement update jobid command.
653 kes Return all time_t dates in db_get_job_record()
654 kes Stop watchdog in SD earlier.
655 kes Put Pool just after Storage in please mount message.
656 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
659 kes Update the po files.
660 kes Fix Verify InitCatalog by making it cache attributes.
662 kes Change name bacula-bat to bat for man 1 page to correspond to
664 kes Check for client and store NULL pointers in status command. This
666 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
667 kes Fix sign extended editing of %p.
668 kes Clean out a little old #ifdefing in cats/mysql.c
670 kes If time diff between DIR and FD is more than 600 seconds convert
671 INFO message to WARNING.
672 kes Implement heap size display in status for all daemons.
673 kes Attempt to fix MySQL db open memory loss (not successfull).
674 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
675 kes Eliminate memory loss in MySQL (possibly other SQLs) during
676 Query. This looks like a MySQL but but by doing extra releases,
677 the memory goes away. This should fix bug #847.
679 kes When backup fails, cancel SD before waiting for sd termination.
680 kes If SD is waiting for FD to connect during cancel, wake up the
682 kes Fix fsf code so that errno is correctly reported.
683 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
685 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
686 so that Bacula doesn't later stumble into a seg fault.
687 kes Use the term Restore Client in the restore Job report.
688 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
689 the original job's FileSetId.
690 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
691 spooling in migration jobs. Not yet tested.
692 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
693 reading conf file from a pipe. However, do it with open_bpipe()
694 rather than popen. Not yet tested.
696 kes Fix an ugly bug where the VolCatBytes were getting updated
698 kes Implement bconsole memory command that prints current memory
699 usage, plus smartalloc dump.
700 kes Clarify some error messages in backup, admin, and migrate.
701 kes Shrink label dialog to smaller size.
702 kes Invert Cancel OK buttons on restore to be OK Cancel.
703 kes More strerror() to bstrerror() conversions.
705 kes Start implementing bstrerror() in place of strerror().
706 kes Stripping path -- seems to work.
708 kes Prevent door and port files from being restored (mostly
710 kes Free an unreleased buffer in compat code.
711 kes Change console Job name from *Console* to -Console- to eliminate
712 Win32 filename problems. Put Win32 path separator when creating
713 Console file. This fixes bug #846.
714 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
716 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
718 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
719 to force Win32 error message.
721 kes First cut strip path. The data should be passed to the FD,
722 but nothing is done with it yet.
723 kes Enhance the digest and signature routines in the crypto
724 library to accept a JCR and to use it to print error messages
725 so that they will go in the Job report rather than the daemon's
727 kes Simplify some of the verify signature code.
728 kes Simplify a few of the alternative returns in the signature
731 ebl Use only POSIX regex instead of GNU regex in breg.c for
732 File relocation. It fix broken freebsd compilation.
733 kes Convert all other Dir files to use new ua class message
735 kes Tentative fix for missing digest signature in bug 807.
736 kes Correct handle problem in new win32_ftruncate routine.
737 kes Convert ua_purge.c and ua_update.c to use new ua class
738 message routines for bat.
740 kes Correct incorrect installation of LICENSE in Win32 installer.
741 kes Display LICENSE at the beginning of the Win32 install.
742 kes Attempt to correct the need for the png files to be installed
744 kes Reapply my bat.conf install script in qt-console. I think I
745 editted bat.pro instead of bat.pro.in and it was lost.
746 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
747 the /var/lock/subsys for subsysdir. Also corrects typos in the
750 kes First cut update job.
751 kes Correct configure to include qmake of src/qt-console directory.
753 kes Make restore job yes/mod/no print in one command so GUI works.
754 kes First cut implementing backup and restore client.
755 kes Correct editing in Verify output that caused a seg fault.
757 kes Insure that bat.conf is not overwritten during installation.
758 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
759 while I was implementing migration in March 2006 !
761 ebl Cleanup file relocation, using char *RegexWhere instead of
762 char *where + bool where_use_regexp
763 kes Update some manpages and add bat manpage.
764 kes Make a first cut at converting bacula.spec.in for bwx-console
766 kes Apply patch from John Goerzen to add hostname as fourth argument
767 to make_catalog_backup script.
768 kes Fix typos I introduced into bsmtp.c
769 kes Make pm_strxxx() routines handle input of NULL pointer. This
770 is to protect from NULL pointers returned from SQL databases.
771 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
772 kes Add more debug to FIFO code -- fix fifo regression test.
774 kes Implement posix_fadvise in FD, and for reading spool files in SD.
775 kes Add thread timer to bnet_connect() to break from OS if wait time
778 kes Update Win32 build to include new files, new symbols, and
780 kes Implement socket level heartbeat (tcp_keepidle)
781 ebl Commit File relocation patch
782 kes Make bat have 'make install' target.
783 kes Warn during install if old gnome-console binary found.
784 kes Warn during install if old wx-console binary found.
785 kes Add -8 option to bsmtp command line to add content type utf-8.
786 Fixes bug #809. (Character coding problem in bsmtp).
787 kes If < is found in target (from, to, cc) then do not enclose the
788 target in < > in bsmtp. Fixes bug #772 (malformed address).
789 kes When printing certain items in dbcheck, stop after 300000.
790 Fixes bug #822. (dbcheck loops).
791 kes Incorrect status in Dir after waiting for mount with poll set.
794 kes Extend idea of Prefer Mounted Volumes to mean a volume about
796 kes Print waiting to reserve a device every 5 mins.
798 kes Don't call close_part in label.c if tape and relabel.
799 kes Don't free volume if busy in close() -- should help with
801 ebl Fix #824 RunScript bug (After script could be execute twice)
802 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
803 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
804 Add a regression script to test RunScript
806 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
809 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
810 deprecated. No additional bugs will be fixed, and they will be dropped
811 in a future release (probably 2.4.0).
812 kes Change name of wx-console to bwx-console to make it more Bacula
814 kes Change the name of gnome-console to bgnome-console to make it
817 kes Some time in March, a Feature Request with patch from Jorj Bauer
818 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
820 The ability for the director to validate a Client (FD) CN against
821 an arbitrary set of patterns rather than the hostname, with
822 A new 'TLS Allowed CN' set of directives which are implemented
823 in the Client resource. Then pattern matching is used in place
824 of hostname matching against the Certificate's CN. As an example, we
825 have certificates which (a) use a local CA, and (b) have a CN of the
827 kes Add new/changed entry points to Win32 build
828 kes Create unaccepted-projects for projects that are not accepted.
829 kes Simplify locking in the reservations system.
830 kes Add more debug code in reservations.
831 kes Make sure error condition on reserving a volume is handled correctly.
832 kes Correct handling of volume_in_use.
833 kes Correct handling of initializing a device.
834 kes Move handling of broadcasting releasing a device into release_device().
835 kes Correct attaching dcr to dev so that it is only done if device
836 is properly initiated.
838 kes Locking debug level tweaks in SD.
839 kes Tweak new Volume code.
841 kes Add exec external-command [wait-seconds] to bconsole. This
842 executes the external-command. Note! normally external-command
843 should be enclosed in double quotes.
844 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
845 it should normally be off in a production system.
847 kes Implement die command for SD so that we can force it to dump.
848 kes Implement SD lock debug code.
849 kes Implement new algorithm for keeping Volume list in SD. It
850 is now owned by the device.
852 kes Implement new code for freeing in use volumes that should
853 resolve if not all, some of the problems of multiple drive
854 tape conflicts described in bug 801.
856 kes Fix gui/bacula-web/images files in svn.
857 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
859 ebl Fix a bug in batch mode (in string escape)
860 kes Correct migration prune SQL typo that crept in in a
863 kes Move bnet_despool() into class in bsock.c
864 kes Modify job report to include director name and Build OS.
865 kes Move drop root privilege and check_catalog() before fork.
866 kes Add update database scripts (version 9 to 10) to updatedb directory.
868 ebl Check size and age of each file after its backup to see if
869 it has changed during backup, if 'checkfilechanges' is set.
870 The FD will do an extra check (stat(2)) after
871 each file backup. mtime, ctime and size are compared with
872 'before backup' information. If time or size mismatch, an
873 error message will be generated. You must upgrade FD to use it.
875 kes Make database name and user configurable
876 --with-db-name=xxx --with-db-user=xxx
877 kes Add back database type to message.c for debugging.
879 kes Implement dir_sql() which issues an SQL query.
880 kes Modify bat medialist to use dir_sql() and do some minor C++
881 formatting as well as eliminating a number of pointers, simplifing
884 kes Fix some of the mtx-changer grep commands for tape label readers.
885 kes Convert a number of bsendmsg into the appropriate send/warning/error
887 kes Suppress the using database message in the .sql command.
888 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
890 kes Add context menu for floating a window.
891 kes Some minor cleanup and name changes in qt-console
892 kes Add doing mt setblk 0 in Win32 mtx-changer.
893 kes Apply Martin's bug fix to move definition of ENODATA for
895 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
898 kes More pruning cleanup.
899 kes Turn on wait_for_drive by default in mtx-changer.
900 kes Turn on Batch insert code by default as it now passes regression.
901 kes Add ./configure --enable-bat to enable building of Bat.
902 No install yet though.
904 kes Implement a new .sql command for bat.
905 kes Implement code to turn off pruning in obtaining the next volume.
906 Pruning is turned off for the status dir command, but turned on
907 for SD requests and for the list nextvolume command.
909 kes Correct Qmsg() that was not updated correctly when committing a
910 previous change (probably the recent TLS patch).
912 kes Write new subroutine is_volume_purged() that explicitly checks
913 if the Volume is purged, and if so marks it as such. This should
914 resolve problems reported about needing to mount twice to recycle
916 kes Rewrite pruning algorithm to do more work in the SQL engine, and
917 to pass a list of JobIds to be deleted to SQL. Also, minimize the
918 amount of duplicated code.
919 kes Do volume pruning only for the Media Type desired (reduces pruning time
920 if multiple Media Types are in the same pool).
921 kes Implement more detailed info in the Job report for the Bacula version
923 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
925 ebl Add bbatch tool to bench database and insert mode.
926 Fix sql quote stuff in batch mode
927 Fix sql stuff for mysql
929 kes Correct problems with am/pm scheduling. Fixes bug #808.
930 kes Implement new prunning code that prunes up to 1000 jobs at
931 the same time. The same technique can be applied to a number
932 of other prune/purge subroutines.
933 kes Add an insanity check when starting a new tape job to ensure
934 that the tape position has not been changed. If so fail the
936 kes Fix Win32 build for dlls to add the folllowing:
937 src/lib/bsock.c -- new file with new entry points
938 src/lib/dlist.c -- new entry points
939 src/cats/sql_create.c -- new entry point
940 src/cats/sql_cmds.c -- new DATA item exported
942 ebl batch mode cleanup bscan-test is ok now.
943 kes Implement SD code to check length of disk volume before appending.
945 kes Correct return status on db_batch... routines.
946 kes Add call to db_write_batch_file_records() to migration code.
947 ebl Fix AfterJob timing
948 kes Move the checking of the database in initializion of the Director
949 to after we drop privileges. This avoids the need for both root
950 and bacula access to the DB.
951 kes Correct a misplaced variable definition in src/filed/backup.c
952 kes Correct how the new batch insert db_create_attributes_record()
953 uses the arguments. Caused a seg fault in bscan.
954 kes Implement lock() and unlock() methods in DEVICE class.
955 Implement block() and set_block(xx) methods in DEVICE class.
956 kes Modify bnet_connect() so that it uses time() to check for the
957 wait time expiring (on some OSes, some system calls may not
959 kes Modify Verify to obtain the previous JobId when it is actually
960 running rather than at schedule time (as it was in 1.38.x).
961 kes Fix src/job.c to handle MaxWaitTime correctly. This should
963 kes When checking pid in pid file, continue running if the pid is
964 the same as ours. This occurs on IRIX after a system crash.
967 kes Extend new GUI API.
968 kes Make the ua structure a class, and implement send_msg(),
969 error_msg(), warning_msg(), and info_msg().
971 kes Apply fix from for building wx-console on the Mac from
973 kes Implement new select mechanism for GUI programs.
974 kes Reorganize initialization of stackedWidgets in bat.
976 kes Add updated nagios plugin supplied by Christian Masopust.
978 kes More bat implementation.
979 kes File migrate bug with Pool Occupancy using mediaid instead
980 of jobids. Fixes bug #795.
981 kes Fix orphaned buffers in filed backup and verify due to
982 crypto buffers not freed during errors. Fixes bug #789.
983 kes Extend new GUI api code to tree commands.
984 kes Ensure that tree and dot commands check console ACLs.
985 kes Permit marking directory with trailing slash.
986 kes Allow 20 console connections (instead of only 10).
988 kes Add smartctl call to bacula-sd.conf as an example of getting
991 kes Modify jobq.c to let simultaneous restore jobs run. This may
992 cause them to fail if they cannot get a drive.
993 kes Add Client Connect Wait to Storage daemon to permit users to
994 modify the time the SD waits for a FD connection.
996 kes Correct virtual changer check which was backwards. This caused
997 volumes to be unloaded into slots already occupied.
999 kes Apply Command ACL filter to JobId list in restore command.
1000 kes Correct typeo in var.c patch.
1002 kes Don't let Bacula prune File or Job records for the current Job.
1003 kes Fix variable substitution pad + inc bug reported (with patch)
1006 kes Correct SQLite log table index as reported by Luca Berra.
1008 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1010 kes Begin implementing new comm signals for API.
1011 kes Fix a few places in lib/message.c where the open fd may
1013 kes Continue implementing lib/bsock.c (real class). Make jcr,
1014 who, host, and port private. There are new methods to access
1015 them for non-class use. This required touching a number of files.
1017 kes Add LANG=C to autoconf/randpass so it works with languages other
1018 than English. Fixes bug #788.
1020 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1022 You will not be able to generate Include/Exclude list any more.
1023 It will be fixed soon.
1024 If you want to use this, you can apply
1025 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1027 kes Restore of sockets created false error messages because Bacula
1028 no longer restores sockets, but the code was still trying to
1029 set the attributes on a non-existent file. Reported by a user.
1030 ebl finish RecyclePool feature
1031 Media will takes Pool.RecyclePool
1032 when moving from Scratch to a Pool or when user will do
1033 update volume=xxx frompool
1034 To use it, add RecyclePool = aPool to your Pool resource
1037 RecyclePool = Scratch
1041 kes Expand new BSOCK class adding signal() and new BNET signals.
1042 kes Begin enhancing the dot commands adding a new API function
1043 that returns more information and will make it easier
1044 to interface to the Director from a program.
1046 kes Make DEVICE fd private. Its new name is m_fd, and can be
1047 obtained with dev->fd() outside the class. This is the
1048 first of many DEVICE members to be made private.
1049 kes Implement Michael Renner's idea on having a virtual disk
1050 changer. I made some minor modifications (e.g. I did not
1051 implement the Virtual Changer directive, but simply set
1052 the Changer Command to an empty string.
1054 kes Implement a BSOCK send() method that writes the whole record
1055 in a single write() request rather than in two.
1056 ebl add update volume=xxx recyclepool=yyyy
1057 volume takes recyclepool from pool when using update volume=xxx from pool
1059 kes Fix encryption deblocking bug, which caused some restored files
1060 to be truncated. This fixes bug #763.
1061 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1062 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1064 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1065 ebl Use btime_t instead of uint64_t in media patch.
1067 kes Optimize the use of the database a bit in the Status dir command.
1068 Only open it when needed, ensure that if any previous database
1069 was opened, it is closed.
1071 kes Correct VolCatBytes bug from media patch.
1072 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1073 in the case of orphaned records.
1074 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1075 and File records in 300K chunks to be more efficient. This
1076 idea came from Juan Luis Frances (if I remember right).
1077 kes Apply Eric's scratch patch that moves a purged Volume to
1078 the RecyclePool. Question: how is RecyclePool set? what
1079 happens to the ScratchPool?
1080 kes Apply Eric's media patch that collects read/write media
1081 times as well as byte counts. This patch requires a
1082 simultaneous upgrade of the DIR and SD. Note, there
1083 should be some way to turn off timing. I'm not sure
1084 times are in Bacula units.
1085 kes Apply Eric's batch-insert patch.
1087 kes Update projects list.
1089 kes Implement Include/Exclude file lists in FD as dlists using
1090 the new dlistString class. This permits efficiently having
1091 large include/exclude lists and completes project Item 25.
1092 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1093 console is authorized to cancel the job. This fixes bug
1095 kes Modify SD so that the VolCatJobs medium record is updated
1096 at the beginning of a Job rather than the end. This
1097 fixes bug #775 where exceeding MaxVolJobs caused jobs
1099 kes Added a mutex around getting and setting Volume information
1100 so that multiple simultaneous jobs will single thread.
1102 Switch to using Subversion
1103 kes Remove src/pygtk-console/ from configure
1105 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1106 plus the entrypoints.
1107 kes Apply patch supplied that corrects debug print
1108 in canceling jobs for max run time. Supplied as
1109 part of bug #621, which was previously fixed.
1111 kes Test on job_canceled() and sd_msg_thread_done inside
1112 loop starting the message thread to avoid a race condition.
1114 kes Remove rl_catch_signal from console.c as it conflicted
1115 with the header definition. Fixes bug #765.
1116 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1118 kes Clarify some stored/acquire messages to indicate if the
1119 problem is with read or append.
1121 kes Fix memory leak with storage ids in cats/sql_get.c
1122 kes Terminate watchdog earlier to avoid reference to released
1123 memory -- reported by Jason Austin.
1124 kes Move closing the database from jobq.c to the director daemon
1125 termination routine. This fixes memory leaks for shadow jobs
1126 (i.e. migration jobs).
1127 kes Free up the unique jobid chain items in migrate.c. This fixes
1128 a memory leak problem.
1129 kes Convert some ugly looking for statements to use foreach_alist
1130 in findlib/find.c. This will facilitate converting the structures
1131 to use dlist (for large include/exclude lists).
1132 kes Fix a bug in the btree.c and btree.h routines, then rename them
1133 rblist and add them to be built in src/lib. Include some new
1134 methods written by Rudolf Cejka that make the code more readable
1135 (hides some of the ugly casting).
1136 kes Add set_next() and set_prev() methods which make the code much more
1137 readable. Also add a new dlistString class that facilitates storing
1138 strings in dlists. To be used in the large include/exclude lists.
1139 kes Make some trivial modifications to lib/tree.h that use rblist
1140 rather than dlist for storing the tree links. This was suggested
1141 by Rudolf Cejka. The result of this is that the restore tree now
1142 uses red-black binary trees rather than simple linked lists. This
1143 should give rather dramatic speed improvements for directories
1144 contining large numbers of directories/files (more than 10000).
1146 kes Fix maxruntime bug #621.
1148 ebl Implement the include JobID in spool file name project.
1149 kes Reorder projects file in order determined by Jan 2007 vote.
1150 kes Implement item #12 on project list -- quick release of FD by
1152 kes Fix open of SQLite3 db where user does not have write permission
1153 so that DIR does not crash. Fixes bug #761.
1155 kes Add back missing @ in Win32 Makefile.
1156 kes Change 'Device not configured to autolabel' from INFO
1158 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1159 which should restart an indefinite # of times.
1160 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1161 other DIR specifications.
1163 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1164 Fix path quoting in SQLite scripts.
1165 Fix problems with SHGetFolderPath.
1167 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1169 kes Fix Job restart on error bug that promotes an Inc to a Full
1170 backup. This should fix bug #755.
1171 kes Add qt-console and first cut of code.
1175 kes Fix Bacula->Documentation link on Win32 to point to index.html
1176 instead of bacula.html. Fixed bug #750.
1177 kes Return JobId in db_get_job_record() when JobId==0. This should
1179 kes Do not release source pointers when restarting a failed job.
1181 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1182 This *should* fix bug #747.
1183 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1186 kes Modify USTORE constructor to set an empty store_source string,
1187 and don't copy the store_source string in a cancel. Hopefully
1188 this will fix Arno's seg fault, bug #744.
1189 kes Add back code to disable conio in configure. Fixes bug #743.
1190 kes Correct the Options scanner in the FD to correctly handle
1191 SHA1 option, which was eating the next option. Reported by
1193 kes Add code to indicate when the SD is spooling, spool wait, and
1194 despooling as requested by Alan Brown.
1196 Version 2.0.0 released: 4 January 2007