1 Technical notes on version 2.3
5 kes Implement a security enhancement: TLS authentication but no
6 encryption. Enabled by setting 'TLS Authentication = yes'.
7 Note when this is on, TLS encryption is turned OFF!
9 kes This patch corrects a problem where the maximum concurrent storage
10 jobs counter gets out of sync during restore jobs causing jobs to
11 'wait on max Storage jobs'. This patch fixes bug #1009.
13 kes This patch fixes bcopy so that it produces correct Volumes.
15 kes This patch eliminates spurious output to the console during a VerifyVolume
16 job that contains encrypted data. It fixes bug #1024.
18 kes This patch prevents the 'status dir' command from trying to use a scratch
19 volume and possibly moving it from one pool to another. This patch fixes
22 kes Add new include to postgresql.c suggested by Marc Cousins so
23 that it compiles correctly with pgre version 8.3.
25 kes Fix --archivedir addition to configure. Replace it with
26 --with-archivedir in configure.in This fixes the regression
28 kes This patch fixes bug #1012 where the job is canceled because
29 of Max Run Time exceeded when the job has not yet started.
31 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
32 one 'part' to write. Instead of each part being stored on disk,
33 written to DVD, then deleted from disk, all parts are written to disk,
34 and only the last is written and deleted from disk.
35 kes This patch fixes the status command to include the formating string for
36 JS_AttrInsterting. It fixes bug #1021.
37 kes This patch should fix the Mac OS X build problem on the latest
38 Darwin, where sys/types.h was not included correctly (apparently
39 due to a change in the Mac headers). The solution was to explicitly
40 ensure that it is defined for the ./configure.
41 This patch also has a rebuild of configure that includes the Debian
42 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
43 kes This patch should ensure that queued messages to the console are
44 displayed as soon as possible. It should fix bug 1007, but has been
47 kes This patch fixes the infinite loop when trying to increase the
48 maximum number of volumes in a Pool during the add command.
49 This patch fixes bug #1008.
53 db Remove extra data on estimate command in joblist for bat.
55 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
56 really change anything, but is the beginning of doing it *right*.
57 To do it completely right the LastWritten date must be passed to
58 the SD, but it is not yet done.
59 kes Minor tweaks to some bat restore SQL.
60 kes This patch fixes bug #1003 where putting the message output from
61 a Verify job into the catalog results in a recursive loop. The problem
62 seems to show up only with postgresql (to be verified).
63 kes Correct %x to %p in postgresql debug statement.
65 kes Fix bug #942 where lots of emails where generated when the heartbeat
66 interval was low and Bacula wanted a different tape from the one in
69 ebl Add new SD despooling attributes and Dir inserting attributes
70 job status codes in the catalog (Status table).
72 ebl Use qmake-qt4 instead of qmake when available (debian system).
74 kes Add a security warning to src/cats/make_catalog_backup.in indicating
75 that passing the password via the command line (arg 3) is insecure.
76 This responds to bug #990 (it doesn't fix it).
78 kes Set default debug_level to zero. This corrects bugs #991 and #993.
79 kes Fix a crash in bat when it cannot connect to the Director for example
80 if the Director is not running.
81 kes Remove redundant INDEX (JobId) from File table in the trunk.
83 kes Make explicit exception to GPL in LICENSE to permit linking
84 the Win32 FD with Microsoft VSS code.
85 kes Apply the Solaris package patch from
86 Masopust, Christian <christian.masopust@siemens.com>
87 kes Apply the patch to optionally add a timestamp in the debug output
88 submitted by Mariusz Czulada <manieq@wp.eu>.
90 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
91 backend (sql_strerror). Fixes bug #989
93 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
94 It applied with no problems.
95 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
97 kes Redirect stderror to stdin on mt status command in mtx-changer.in
98 since the status is returned on stderr on Solaris.
99 kes Activate Close button on tray-monitor window. This fixes
101 kes Check for NULL item in parse_conf.c before calling it. In the
102 case of Device, there is no item and this caused a seg fault when
103 Device appears in the conf file.
104 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
105 avoids pulling in config.h multiple times in some new code.
107 kes Fix spurious warning message printed when creating a volume with
108 a LabelFormat. This fixes bug #976.
110 Release Version 2.2.5
112 kes Add JobId in place of Job name in all the Jmsg() output.
113 kes Correct the APP_DESC for the Win32 storage service (remove an e).
115 kes Make maxvol-test and new more strict maxvol2-test work.
116 kes Print JobId in all Jmsg() job output.
118 kes Add new SD despooling attributes and Dir inserting attributes
119 job status codes. This fixes bug 961.
120 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
122 kes Fix doc issue. This fixes bug #963.
123 kes Fix listing performance problems in bat. Pointed out by
125 kes Remove old debug code.
126 kes Fix bat code that tests for Win32. This should fix bug #968
127 kes Query 5 list wrong Vol after migration. This fixes bug #960
129 ebl Fix #969 where user can't change Replace option in restore menu.
131 kes Save jcr in thread specific data (tsd) for each thread.
132 kes Make Dmsg() print JobId as -%u.
133 kes Make Jmsg, Emsg, and others automatically pickup the jobid
134 for the thread if it exists.
135 kes Remove old reservation debug jid code.
136 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
137 ebl Add an option that permit to specify spool size in job
138 definition. (Applying patches/testing/spoolsize_per_job.patch).
139 You must upgrade SD and DIR at the same time.
140 dvl Add new configuration item --archivedir
141 dvl Adjust regression tests to use tmp not /tmp. This will allow
142 multiple concurrent runs of the regression tests.
144 kes Fix race condition that drops final block written to volume.
145 This happens in rare cases with multiple simultaneous jobs
146 when the Volume fills. This fixes bug #964. May be related
147 to bug #935 and possibly #903.
148 kes Eliminate more strerror() and replace with bstrerror().
149 kes Remove BSD getopt and replace with unrestricted IBM version.
150 kes Fix Win32 build for changed calling sequences.
151 kes More tweaks to the mount volume routines to get everything
152 right. Changed variable name from find to have_vol, which is
153 much easier to understand.
154 kes Enhance btimer debug code.
156 kes Fix FD->SD authorization failure, which was due to spurious
157 wakeups from a pthread_cond_timedwait(). Simply check the
158 predicate before continuing. This fixes bug #953.
159 kes Add const char where needed (more to do). Remove temp debug code.
161 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
162 kes Don't overwrite error message in check_tables_version.
164 kes Unlock batch insert tables with same calls used elsewhere.
165 kes Allow starting 59 jobs a second.
166 kes Make SD session key more random.
167 kes Add retry for SQLite opening db if it fails. Probably helps
169 kes Suppress extra error messages during batch insert failure.
171 kes Add jcr to timer packets so if killed message can be sent to job.
172 kes Add JobId to all Dmsg() output.
173 kes Put some FD auth code on dbglvl rather than fixed.
174 kes Return insert attributes error message in db msg buffer to avoid
175 false error messages. Helps fix bug #966.
176 kes Separate batch init error messages. Probably helps fix bug #966.
177 kes Make SD code that contructs attribute insert check string lengths
179 kes If Dir gets an error during inserting attributes, cancel SD.
180 This reduces unnecessary error messages.
182 kes Correct search boolean for getting Volume info
183 ebl Cleanup batch insert code. Probably fixes bug #965.
184 kes Back out one small change to the reservation system (reserving a volume).
185 kes Rework how a Volume is mounted. It is now much more intelligent and
186 will always attempt to use any mounted volume if possible and reduces
187 calls to the Director asking about volumes.
189 kes Turn off some code when batch insert not enabled.
190 kes Edit FD name in connect error messages.
191 kes Rework the reservation system to take into account that the Director
192 might give us a Volume that is different from the current one being
193 used, and to ensure that we don't exceed Maximum Volume Jobs.
194 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
195 fatal error with multiple jobs running'
196 kes Add more debug code in reservation system.
197 kes Implement maxvol-test to check bug #947.
199 kes Add code to handle tray monitor separated from Win32 FD.
200 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
202 kes Add missed return in fixing verify bug -- trunk only.
203 ebl Fix a command parser issue causing a director segfault.
204 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
206 kes Increase the max block size to 4MB fixes bug #957.
207 kes ERABT if user sets min block size > max block size. Fixes bug #956.
208 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
209 is not properly mounted (recognized) during a poll.
210 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
211 Job that has differences reports Verify OK.
212 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
214 ebl Add an option to operate on all pools with update vol parameters.
215 This complete the project 20. Patch from Nigel Stepp.
216 ebl Add history support to bconsole when using readline.
217 Using Ctrl-D to exit doesn't update .bconsole_history
218 kes Modify new volume algorithm to use max MediaId for generating next
219 volume number rather than the count of Volumes. This should essentially
220 eliminate the failure rate if some volumes were deleted. Bug #921.
221 kes Begin implemention of Optimize Job Scheduling.
222 kes Implement restore callback that Dirk and I agreed on for bat
223 restore. This fixes bug #928. Restore of backup of zero files fails.
224 kes Fix SQL Catalog logging which broke with new db_escape_string
227 Release Version 2.2.4
229 kes Fix bacula_cats.def for new db_escape_string().
230 kes Increase size of name string when FD making connection to SD.
231 May fix bug #953. FD->SD connection failure.
233 kes Add code to help Dan debug 2drive-incremental-2disk test.
234 kes Add code to try to fix bug #908.
235 kes Add waits to multiple exit detection code to try to force pid
236 file to always be deleted.
237 kes Restore good dev.tar.gz to rescue set appropriate binary property.
239 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
240 trying to switch drives by checking for blocking before unblocking.
242 kes Cancel storage daemon in all cases where FD reports error. This
243 should fix virtually all cases of bug #920.
244 kes Fix db_escape_string() for MySQL which did not compile.
246 kes Fix error message that was clobbered when Dir tells SD it does not
247 have write permission on Volume. This should fix a minor point
248 in bug #942, but not the main problem.
249 kes Add code to cancel job in SD if FD connection fails. This should
251 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
252 dvl Pass jcr and db into db_escape_string() to enable better escaping
254 kes Fix migration code to get correct Volume name with multiple volumes
255 by skipping |. Fixes bug #936.
256 kes Implement patch supplied by Landon to fix bug #944 where using
257 TLS with bconsole uses 99+% of the CPU.
258 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
260 kes Move patches into patches directory.
262 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
265 ebl Using 'm' in bconsole will show messages like before,
266 and not memory usage.
267 kes Fix bug #935, and probably also bug #903 where files were not
268 restored. MediaId was not properly set in JobMedia record after
271 kes Suppress chown and chmod error messages if the FD is not running
274 kes Apply Martin Simmons' patch that should turn off the new API usage
275 when batch insert is turned off allowing building on older
277 kes Add ./configure search in qwt-qt4 for qwt package
279 kes Bacula is now free of 3rd party GPL copyrighted code!
281 kes Add guid_to_name.c/h which replace idcache.
282 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
284 ebl Detect if new PosgreSQL batch insert API is present.
285 kes Correct incorrect mempool call causing Director crash. Occurs on
286 systems without va_copy().
287 sb Update spec files for 2.2.1 release
289 kes Fix memory pool call in ua_output.c. bug #934.
290 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
291 Add test program to fnmatch.c
293 kes Integrate patch to README.vc8 from
294 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
295 edit it to get it into Unix patch format.
296 kes Implement mkpath.c to replace old FSF makepath.c
298 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
300 Release Version 2.2.1
302 kes Update POTFILES.in
303 kes Cleanup a few underquoted AC_DEFUNs in configure
304 kes Apply patch from Martin Simmons that adds a test for va_copy to
307 kes Fix bug #921 by increasing the number of tries to create a new volume
309 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
310 can be called multiple times. Implement a version for machines
311 without va_copy() that gets a big buffer.
313 kes Integrate more portable zone offset code into bsmtp.c
314 Submitted by Attila Fülöp.
316 kes Fix bad SD->FD return status reported by
317 (James Harper) <james.harper@bendigoit.com.au>
318 ebl Fix a bug in read_close_session which return random status
319 thanks to James Harper
321 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
322 and directory names during restore of single file/directories.
323 kes Add sanity checks to .sql command when string is empty. Hopefully
324 that will resolve Dirks Director crash.
326 kes Apply patch submitted by Martin Simmons that corrects a seg fault
327 in the bsmtp chat subroutine when debug is >= 10.
329 kes Fix Director crash when running bat SQL queries.
330 kes Add David's notes on Item 8: Copy pools.
332 kes Rework projects file to be current and ready for a vote.
333 kes Enhance lex scanner error message.
335 kes Tweak LICENSE file to mention BSD code.
336 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
337 if specified on the ./configure.
338 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
339 This class is intended to allow us to open a second bsock to the
340 Director while in the restore subdialog.
342 kes Fix configure to create bat Makefile before creating dependencies.
343 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
344 kes Add a tooltip to the tray monitor.
345 dvl Set the Director's PID file before dropping privs. This fixes
348 kes Update AUTHORs file
349 kes Increase the default max concurrent jobs to 20 in FD and SD to
350 correspond with the default .conf files.
351 kes Rewrite the Win32 service routines. This eliminates the 3 copies
352 some different, of the same file created by RN when porting the
354 kes Rearrange some of the Win32 directories and the placement of the files
356 kes Set DEVELOPER flag in version.h
358 ========================================================================
359 Release Version 2.2.0
361 kes Apply a second doc patch from Marc.
362 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
363 improves the tips section that discusses how to setup multiple
366 kes Update bat README file.
367 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
368 corrects a typo in the Recycle status check in db_find_next_volume().
369 This will probably fix a number of annoying problems with multiple
371 kes Modify most of dird/msgchan.c to use bsock class calls rather than
372 bnet calls -- no functionality change.
374 kes Modify the Verify output to specify if files are missing on
375 the Volume(s) or disk. Fixes confusion in bug #916.
376 kes When more than one Volume is read in a migration job, the last
377 Volume bytes reported are from the last read volume rather than
378 the last written volume. Fixed. This fixes bug #910.
379 kes Fix display of Recycle flag after update volume=foo recycle=yes.
380 It previously printed New Recyle flag is: no. This fixes bug
383 kes Correct seg fault when switching tape drives during restore.
384 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
385 be used until after 2.2.0 release.
387 kes Remove fnmatch() in SD that permitted wild card specifications.
390 kes Fix %g in filename returned by SQL for browse tree reported by
392 kes Fix configure so that it puts config.out in the cwd rather than
394 kes Attempt to fix the locking problem reported by Eric in bug #906.
395 kes Make berrno class to leave errno unchanged after constructor call.
396 kes Make bnet_server use the heap rather than the stack to allocate
397 its socket fd pointers to avoid a crash at termination. Problem
398 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
400 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
401 and putting it in depkgs-qt along with Qt4.3.
403 kes Rework code in acquire.c that switches drives for reading when
404 the Media Type does not match. This should fix bug #906
406 ebl Fix a director segfault during job setup #907
407 kes Correct seg fault in postgresql when first operation returns no
408 rows. Fixes Dirks File browser problem seg fault with bat.
410 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
411 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
414 kes Implement PopUp YES/NO dialog for bat.
416 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
418 kes Correct RunScript to terminate job in FD on failure.
419 kes Change abort_on_error and AbortJobOnError to fail_on_error
420 and FailJobOnError in RunScripts.
421 kes Minor tweaks of code formating in RunScripts, principally to
422 avoid depassing 80 columns.
424 kes Eliminate one #ifdef Win32 in bsmtp
425 kes Implement grow tool to grow a file for testing very large databases.
426 kes Add big-vol-test to test Bacula seeking with > 5GB.
429 kes Modify find_next_volume() to return all values in Media record.
430 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
434 kes Update Release notes
436 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
437 Warning, in previous beta version, all media get from scratch keep their
440 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
441 This should fix bug #842. Made a note to look at removing the temp
442 files at the end of the install.
443 kes Add ability to mount and unmount a file device providing it is
444 marked as being removable and has the appropriate mount and unmount
445 commands defined in the Device resource. This fixes bug #830.
446 kes When applying a storage override, release all previous storage
447 definitions rather than just prepending the new storage.
448 This should prevent a good deal of confusion.
450 kes Implement ./configure search for qwt libraries.
452 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
453 Win32 FD. This should fix bug #893.
454 kes Remove an unnecessary beep in Win32 init code.
455 kes Update copyright dates in Win32 executable about boxes.
456 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
457 code with a BSD getopt.c and getopt.h.
458 kes Remove sched.h from the Win32 compat directory -- not used.
459 kes Remove the Exit menu item from the Win32 tray monitor. If you really
460 need to shut it down, do it through the services panel or the command
462 kes Remove some inappropriate Bacula FSFE copyrights.
463 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
464 kes Fix regress config non-portable test as pointed out by
465 Florian Heigl <florian.heigl@gmail.com>
466 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
467 as pointed out by Florian Heigl <florian.heigl@gmail.com>
469 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
470 Reported by Frank Sweetser.
474 kes Fix client-only build.
475 kes Integrate client-only fixes for bsys (initgroups) and conio from
476 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
477 kes Make arguments to get_scratch_volume() in same order as other
479 kes Rework the prune_volumes() subroutine so that after purging and
480 no volume found in desired pool, it will check for a scratch
481 volume. This prevents recycling the whole scratch pool.
482 kes Add code to status storage to print boffset_t (largefile support).
484 kes Move qwt (Graphics libarary for Qt4) to depkgs.
485 kes You now need a --with-qwt=<dir> to be able to build bat.
486 kes Update src/win32/cats/bacula_cats.def to include the new
487 db_get_query_dbids() call on Win32.
489 kes Correct a problem when selecting a scratch volume and moving
490 it to another pool that lost some columns.
491 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
492 kes Enhance Autochanger error messages to include Volume and device name.
493 kes Rework prune_volumes() code to take account of InChanger flag,
494 and to handle recycling volumes going to the Scratch pool and
495 current pool because the RecyclePool directive.
496 kes Implement a better and more efficient db_get_query_dbids() to
497 handle creating and passing back a list of DBIds.
501 kes Start work on new more efficient DBId subroutine. First use
502 will be for recycling volume to Scratch inchanger.
503 kes Increase number of JobIds in pruning from 1000 to 10000.
504 This to be replaced by above routine.
505 kes Begin implementation of building Qt4 on Win32.
506 kes Correct typo in fix I added for bad TLS shutdown.
507 kes Pull 2.0.3 patches into patches directory.
508 kes Update Release notes. Include qt-console in line count.
509 kes Update Projects file.
511 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
512 bug in migration code where a job that spanned two volumes
515 kes Implement new BST_DESPOOLING blocked state. Change from locking
516 during despooling in SD to blocking. This means that other threads
517 can work with the device structure, in particular the reservations
518 system while despooling.
520 kes Fix return in reservation message queue that missed clearing
521 the jcr lock (implemented 26Jun07 below).
522 kes Rename a number of dev methods to make locking function names
524 kes Document locking in lock.c. Move lock structures to new file
527 kes Move reservations message lock to lock jcr only this
529 kes Move main SD locking code into lock.c (new file).
530 kes Update Win32 build to include lock.c
534 kes Dirk committed the qwt library code for drawing graphs in bat.
535 kes Tweak install of qwt so that it is integrated with ./configure.
537 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
538 out by Eric (my typo).
539 ebl Fix configure.in to get batch mode enable
540 kes Return correct string from authenticate.cpp in bat when connecting
542 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
543 spurious line drops when using TLS.
544 kes Do not file reparse points when restoring a file that already
547 kes Implement Windows reparse points -- similar to directories, but
548 we do not descend into it. This is a first cut. They seem to
549 be backed up, but restore is not yet tested.
550 kes Remove restore_blocking in tls code when shutting a socket to leave
551 it in blocking mode. Hopefully this will fix the encryption bug
552 reported by Frank Sweetser.
553 kes When opening a file for backup, tell the OS that we are going to
554 read it sequentially -- optimization.
555 kes Change variable names in authenticate_director() to not conflict
556 with member names in bat. Caused great confusion with compiler,
559 kes Queue openssl error messages in case of comm problem.
560 kes Do shutdown() call if socket terminated.
561 kes Remove some duplicated code in tls.c
562 kes Move more of the bsock member variables into private and access
564 kes Add Frank Sweetser's tls-test to the regression suite.
566 kes Add Swedish sv.po file
568 kes Don't print clock skew message in FD if less than 3 seconds diff.
569 kes Add a bit of VSS info to status client.
570 kes Implement a first cut of Vista VSS, using Win2003 code.
574 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
575 loaded tape but uses first drive).
576 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
577 This was indeed a Win32 issue.
579 kes Simplify search of autochanger for in-use Volume.
580 kes Fix exit condition of check for in-use volume. kes Remove
581 inappropriate my_postgresql_free_result() in db_close()
583 kes Fix bad return in FD when encryption signature not found.
584 Probably caused a crash.
585 kes Inhibit missing encryption signature error messages for
586 file types where no signature computed.
587 kes Correct inverted check on autochanger in reservation system.
588 kes Tweak debug code in autochanger reservation.
590 kes Add some additional locking in the cats directory in subroutines
591 that modify packet variables called from batch insert.
592 kes Rework how dcrs are allocated. new_dcr() can now be called
593 with an existing pointer, and it will simply clean it up.
594 This allows the reservation system to test various different
595 devices, and will permit easy device changes.
596 kes A bunch of changes all over to handle new new_dcr() calling
598 kes Work more on the Volume management in the SD. Remember Volumes
599 for tape drives and for autochangers (even virtual disk changers).
600 kes When looking at the Volume list to reserve a drive, handle
601 autochanger names correctly by interating through the changer
602 devices. Also call the Director to see if a Volume is suitable
604 kes Fix some bugs in bscan. Make sure all media records are written.
605 Make sure that valid JobMedia records are written for disk files.
606 Previously they were completely wrong.
607 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
608 that the URLs don't change and so that the developers will all
609 work off the same copy. Rebuild from scrach.
610 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
614 kes Fix seg fault in FD from incorrect digest size.
615 kes Fix argument to non-OpenSSL crypto.c subroutine.
619 kes Remove a few malloc()s from the encryption code.
620 kes Use the class calls to bsock in filed/backup.c and restore.c in
621 place of the old bnet_xxx code.
622 kes Implement code that does an on the fly calculation of the
623 signing digest during restore of encrypted files. It makes
624 a best guess at the algorithm, and if it is not correct, will
625 then revert to the old code which reads the file after it is
627 kes Implement at least one missing crypto stream in stream_to_ascii()
628 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
629 #877 where a reload with bad syntax causes Dir to exit.
631 Cut: 2.1.14 beta (not released)
633 kes Do not free a volume on a tape drive until another volume is
634 mounted and read, or the autochanger unloads the volume.
635 This should help the SD re-use volumes that are already mounted,
636 and should fix bug #886.
637 kes Apply patch from user brettedgar that allows gnome2-console include
638 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
639 kes Apply patch from Lucien Weller that fixes day of week calculation
640 because of DST flag problem. Fixes bug #887.
642 kes Move find_next_appendable_volume() to after acquiring a valid device
643 in reserve.c. This fixes bug #864 -- confirmed by reporter.
645 kes Unable to reproduce bug 872. However added additional testing for
647 kes Bug #874 resolved by documenting SQLite limitations.
648 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
649 kes Bug #881 resolved by removing typo in mtx-changer script.
650 kes Made Frank Sweetser's wiki the official Bacula wiki with his
651 approval. Added a link to the wiki on the web page, and implemented
652 a backup from http://paramount.ind.wpi.edu
654 kes Fix update allfrompool to pass pool name.
656 kes Convert to pure GPL v2 license.
657 kes Fix sscanf problems reported by Peter Buschman that caused
658 a bus error on Solaris.
659 kes Rework (simplify) the select prompt in bat.
660 kes Move get_jobid_from_tid() into lib and create a
662 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
663 should definitely fix the problem of lost error messages in the
665 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
666 kes Eliminate tcpd.h from the project. Enclose the #include from the
667 library with extern C ...
668 kes Add print of signal name when a signal is trapped.
672 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
674 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
675 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
676 makes SQLit3 run 30 times faster, though a bit less safe.
677 kes Implement --with-batch-insert in configure and detection of thread
678 safe libraries. It is on by default, but turned off if no thread
679 safe library (e.g. SQLite 2) is available.
681 kes Fix Bacula PostgreSQL buffer overruns.
682 kes Do better checking for NULL results returned from PostgreSQL;
683 implement retry for failed queries; clear results buffer after
684 failed query. Hopefully this will correct the PostgreSQL failures.
686 kes Implement algorithm to handle only one appendable volume with
687 Prefer Mounted Volumes = no.
688 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
689 returned from a query.
690 kes Make volume lock recursive.
691 kes Implement an additional volume reservation algorithm that
692 starts by considering all reserved volumes then uses the
693 old brute force algorithm of searching the resources to
694 find a suitable device.
695 kes Add new reservations debug code and refine the old code.
696 kes Update the win32/dll/bacula.defs file.
698 kes Tweak reservations algorithm to permit a few more cases, i.e.
699 volume reserved, but on different drive, ...
700 kes Enhance SD status to include Pool and Media Type for drive in a
701 more readable format (a bit longer).
702 kes Fix PostgreSQL double free.
704 kes Minor refactoring of restore decryption code.
705 kes Add code to smartall.c to detect double free of a buffer.
707 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
708 so that bsmtp will create a correct email address (mailbox only).
709 kes Modify 'memory' command so that the buffers are listed as 'In use'
710 to avoid confusion with Orphaned buffers.
711 kes I reworked the OpenSSL include/lib flags to be handled in
712 the standard Bacula way, which should fix bug #863 concerning
713 non-standard OpenSSL libraries.
715 kes Implement Help Browser window for bat.
716 kes Fix reload bug that reset StorageId to zero.
718 kes Fix TLS #ifdefing when TLS turned off.
719 kes Ensure that when labelling a tape with Slot=0 that InChanger
721 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
723 kes Add StartTime to final uar_sel_jobid_temp query so that we can
724 add DISTINCT (required by PostgreSQL).
725 kes Implement BSOCK authenticate_director() method. Eventually will
726 authenicate all daemons.
727 kes Move several more functions into the BSOCK class.
729 kes Add code to tell the OS that we no longer need a cached
730 file that we were reading. In findlib/bfile.c. Also,
731 only cache files that we are reading. Thanks to
732 Tobias Oetiker <tobi@oetiker.ch> for the idea.
733 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
734 kes Implement script to automatically generate cats and dll .def
736 kes Update README.mingw32 to include new .def file generation.
737 kes Correct typo in UTF-8 error message as reported by:
738 jhernandez <julianhernandez@gmail.com>
739 kes Add additional sm_check() code on debug level 1.
740 kes Set default debug level to 1.
741 kes Trap SIGABRT in attempt to get traceback.
743 kes Reduce bat connect timeout from 30 to 15 seconds.
744 kes More restructuring and implementing BSOCK class in place of
746 kes Remove a few unnecessary malloc() tests in crypto code.
747 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
748 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
749 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
751 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
753 kes Fix Verify InitCatalog. The attributes were not pointing to the
754 correct saved location.
755 kes Implement message callback so that GUI is sure to get all
756 daemon messages. Currently displayed in a dialog in bat.
757 kes Ignore SIGUSR2 (Bacula timer) in bat.
758 kes Apply regress patch from bug #859 to allow regress to work
759 with Solaris compiler.
761 kes Begin adding TLS support to bat.
762 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
763 clean up lex.c and make it more readable.
765 kes Move more bnet functions into the BSOCK class.
766 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
767 kes Complete change of berrno strerror() method to bstrerror()
771 kes Cleanup incorrect email addresses in bsmtp.
772 kes Make bat display initial messages rather than discard them.
774 kes First cut of adding .mod to the run command.
775 kes Implement auto display of messages in bat.
776 kes Enhanced preferences to allow all Bacula output to be
779 kes Try to make bsmtp date routines more generic.
780 kes Fixed bug #856 autochanger documentation.
781 kes Rework bsmtp date editing for Win32. This fixes bug #854.
782 kes Add new cats entry point so Win32 builds.
784 kes Attempt to fix bsmtp date editing on OSes without %z editing.
786 kes Do better checking for the MySQL 64 bit libraries looking for both
787 .a and .so libraries.
788 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
789 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
790 kes Require the thread safe version of MySQL during configure. Thanks
791 to Andre Noll for pointing this out.
792 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
793 continuing in migration code.
794 kes Apply implementation of tray-monitor font derived from gnome-console
795 submitted by Andreas Piesk <a.piesk@gmx.net>
797 kes Eliminate important memory loss in SQLite
798 kes Fixed the batch insert MySQL thread specific data that was not
799 being freed. See cats/mysql.c:db_thread_cleanup().
800 kes Fix restore before command.
801 kes Convert old hdr.name to name() in a few places.
802 kes Implement update jobid command.
803 kes Return all time_t dates in db_get_job_record()
804 kes Stop watchdog in SD earlier.
805 kes Put Pool just after Storage in please mount message.
806 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
809 kes Update the po files.
810 kes Fix Verify InitCatalog by making it cache attributes.
812 kes Change name bacula-bat to bat for man 1 page to correspond to
814 kes Check for client and store NULL pointers in status command. This
816 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
817 kes Fix sign extended editing of %p.
818 kes Clean out a little old #ifdefing in cats/mysql.c
820 kes If time diff between DIR and FD is more than 600 seconds convert
821 INFO message to WARNING.
822 kes Implement heap size display in status for all daemons.
823 kes Attempt to fix MySQL db open memory loss (not successfull).
824 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
825 kes Eliminate memory loss in MySQL (possibly other SQLs) during
826 Query. This looks like a MySQL but but by doing extra releases,
827 the memory goes away. This should fix bug #847.
829 kes When backup fails, cancel SD before waiting for sd termination.
830 kes If SD is waiting for FD to connect during cancel, wake up the
832 kes Fix fsf code so that errno is correctly reported.
833 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
835 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
836 so that Bacula doesn't later stumble into a seg fault.
837 kes Use the term Restore Client in the restore Job report.
838 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
839 the original job's FileSetId.
840 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
841 spooling in migration jobs. Not yet tested.
842 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
843 reading conf file from a pipe. However, do it with open_bpipe()
844 rather than popen. Not yet tested.
846 kes Fix an ugly bug where the VolCatBytes were getting updated
848 kes Implement bconsole memory command that prints current memory
849 usage, plus smartalloc dump.
850 kes Clarify some error messages in backup, admin, and migrate.
851 kes Shrink label dialog to smaller size.
852 kes Invert Cancel OK buttons on restore to be OK Cancel.
853 kes More strerror() to bstrerror() conversions.
855 kes Start implementing bstrerror() in place of strerror().
856 kes Stripping path -- seems to work.
858 kes Prevent door and port files from being restored (mostly
860 kes Free an unreleased buffer in compat code.
861 kes Change console Job name from *Console* to -Console- to eliminate
862 Win32 filename problems. Put Win32 path separator when creating
863 Console file. This fixes bug #846.
864 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
866 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
868 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
869 to force Win32 error message.
871 kes First cut strip path. The data should be passed to the FD,
872 but nothing is done with it yet.
873 kes Enhance the digest and signature routines in the crypto
874 library to accept a JCR and to use it to print error messages
875 so that they will go in the Job report rather than the daemon's
877 kes Simplify some of the verify signature code.
878 kes Simplify a few of the alternative returns in the signature
881 ebl Use only POSIX regex instead of GNU regex in breg.c for
882 File relocation. It fix broken freebsd compilation.
883 kes Convert all other Dir files to use new ua class message
885 kes Tentative fix for missing digest signature in bug 807.
886 kes Correct handle problem in new win32_ftruncate routine.
887 kes Convert ua_purge.c and ua_update.c to use new ua class
888 message routines for bat.
890 kes Correct incorrect installation of LICENSE in Win32 installer.
891 kes Display LICENSE at the beginning of the Win32 install.
892 kes Attempt to correct the need for the png files to be installed
894 kes Reapply my bat.conf install script in qt-console. I think I
895 editted bat.pro instead of bat.pro.in and it was lost.
896 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
897 the /var/lock/subsys for subsysdir. Also corrects typos in the
900 kes First cut update job.
901 kes Correct configure to include qmake of src/qt-console directory.
903 kes Make restore job yes/mod/no print in one command so GUI works.
904 kes First cut implementing backup and restore client.
905 kes Correct editing in Verify output that caused a seg fault.
907 kes Insure that bat.conf is not overwritten during installation.
908 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
909 while I was implementing migration in March 2006 !
911 ebl Cleanup file relocation, using char *RegexWhere instead of
912 char *where + bool where_use_regexp
913 kes Update some manpages and add bat manpage.
914 kes Make a first cut at converting bacula.spec.in for bwx-console
916 kes Apply patch from John Goerzen to add hostname as fourth argument
917 to make_catalog_backup script.
918 kes Fix typos I introduced into bsmtp.c
919 kes Make pm_strxxx() routines handle input of NULL pointer. This
920 is to protect from NULL pointers returned from SQL databases.
921 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
922 kes Add more debug to FIFO code -- fix fifo regression test.
924 kes Implement posix_fadvise in FD, and for reading spool files in SD.
925 kes Add thread timer to bnet_connect() to break from OS if wait time
928 kes Update Win32 build to include new files, new symbols, and
930 kes Implement socket level heartbeat (tcp_keepidle)
931 ebl Commit File relocation patch
932 kes Make bat have 'make install' target.
933 kes Warn during install if old gnome-console binary found.
934 kes Warn during install if old wx-console binary found.
935 kes Add -8 option to bsmtp command line to add content type utf-8.
936 Fixes bug #809. (Character coding problem in bsmtp).
937 kes If < is found in target (from, to, cc) then do not enclose the
938 target in < > in bsmtp. Fixes bug #772 (malformed address).
939 kes When printing certain items in dbcheck, stop after 300000.
940 Fixes bug #822. (dbcheck loops).
941 kes Incorrect status in Dir after waiting for mount with poll set.
944 kes Extend idea of Prefer Mounted Volumes to mean a volume about
946 kes Print waiting to reserve a device every 5 mins.
948 kes Don't call close_part in label.c if tape and relabel.
949 kes Don't free volume if busy in close() -- should help with
951 ebl Fix #824 RunScript bug (After script could be execute twice)
952 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
953 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
954 Add a regression script to test RunScript
956 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
959 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
960 deprecated. No additional bugs will be fixed, and they will be dropped
961 in a future release (probably 2.4.0).
962 kes Change name of wx-console to bwx-console to make it more Bacula
964 kes Change the name of gnome-console to bgnome-console to make it
967 kes Some time in March, a Feature Request with patch from Jorj Bauer
968 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
970 The ability for the director to validate a Client (FD) CN against
971 an arbitrary set of patterns rather than the hostname, with
972 A new 'TLS Allowed CN' set of directives which are implemented
973 in the Client resource. Then pattern matching is used in place
974 of hostname matching against the Certificate's CN. As an example, we
975 have certificates which (a) use a local CA, and (b) have a CN of the
977 kes Add new/changed entry points to Win32 build
978 kes Create unaccepted-projects for projects that are not accepted.
979 kes Simplify locking in the reservations system.
980 kes Add more debug code in reservations.
981 kes Make sure error condition on reserving a volume is handled correctly.
982 kes Correct handling of volume_in_use.
983 kes Correct handling of initializing a device.
984 kes Move handling of broadcasting releasing a device into release_device().
985 kes Correct attaching dcr to dev so that it is only done if device
986 is properly initiated.
988 kes Locking debug level tweaks in SD.
989 kes Tweak new Volume code.
991 kes Add exec external-command [wait-seconds] to bconsole. This
992 executes the external-command. Note! normally external-command
993 should be enclosed in double quotes.
994 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
995 it should normally be off in a production system.
997 kes Implement die command for SD so that we can force it to dump.
998 kes Implement SD lock debug code.
999 kes Implement new algorithm for keeping Volume list in SD. It
1000 is now owned by the device.
1002 kes Implement new code for freeing in use volumes that should
1003 resolve if not all, some of the problems of multiple drive
1004 tape conflicts described in bug 801.
1006 kes Fix gui/bacula-web/images files in svn.
1007 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1009 ebl Fix a bug in batch mode (in string escape)
1010 kes Correct migration prune SQL typo that crept in in a
1011 recent 2.1.x change.
1013 kes Move bnet_despool() into class in bsock.c
1014 kes Modify job report to include director name and Build OS.
1015 kes Move drop root privilege and check_catalog() before fork.
1016 kes Add update database scripts (version 9 to 10) to updatedb directory.
1018 ebl Check size and age of each file after its backup to see if
1019 it has changed during backup, if 'checkfilechanges' is set.
1020 The FD will do an extra check (stat(2)) after
1021 each file backup. mtime, ctime and size are compared with
1022 'before backup' information. If time or size mismatch, an
1023 error message will be generated. You must upgrade FD to use it.
1025 kes Make database name and user configurable
1026 --with-db-name=xxx --with-db-user=xxx
1027 kes Add back database type to message.c for debugging.
1029 kes Implement dir_sql() which issues an SQL query.
1030 kes Modify bat medialist to use dir_sql() and do some minor C++
1031 formatting as well as eliminating a number of pointers, simplifing
1034 kes Fix some of the mtx-changer grep commands for tape label readers.
1035 kes Convert a number of bsendmsg into the appropriate send/warning/error
1036 message class calls.
1037 kes Suppress the using database message in the .sql command.
1038 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1040 kes Add context menu for floating a window.
1041 kes Some minor cleanup and name changes in qt-console
1042 kes Add doing mt setblk 0 in Win32 mtx-changer.
1043 kes Apply Martin's bug fix to move definition of ENODATA for
1045 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1046 sqlite2 and sqlite3.
1048 kes More pruning cleanup.
1049 kes Turn on wait_for_drive by default in mtx-changer.
1050 kes Turn on Batch insert code by default as it now passes regression.
1051 kes Add ./configure --enable-bat to enable building of Bat.
1052 No install yet though.
1054 kes Implement a new .sql command for bat.
1055 kes Implement code to turn off pruning in obtaining the next volume.
1056 Pruning is turned off for the status dir command, but turned on
1057 for SD requests and for the list nextvolume command.
1059 kes Correct Qmsg() that was not updated correctly when committing a
1060 previous change (probably the recent TLS patch).
1062 kes Write new subroutine is_volume_purged() that explicitly checks
1063 if the Volume is purged, and if so marks it as such. This should
1064 resolve problems reported about needing to mount twice to recycle
1066 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1067 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1068 amount of duplicated code.
1069 kes Do volume pruning only for the Media Type desired (reduces pruning time
1070 if multiple Media Types are in the same pool).
1071 kes Implement more detailed info in the Job report for the Bacula version
1073 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1075 ebl Add bbatch tool to bench database and insert mode.
1076 Fix sql quote stuff in batch mode
1077 Fix sql stuff for mysql
1079 kes Correct problems with am/pm scheduling. Fixes bug #808.
1080 kes Implement new prunning code that prunes up to 1000 jobs at
1081 the same time. The same technique can be applied to a number
1082 of other prune/purge subroutines.
1083 kes Add an insanity check when starting a new tape job to ensure
1084 that the tape position has not been changed. If so fail the
1086 kes Fix Win32 build for dlls to add the folllowing:
1087 src/lib/bsock.c -- new file with new entry points
1088 src/lib/dlist.c -- new entry points
1089 src/cats/sql_create.c -- new entry point
1090 src/cats/sql_cmds.c -- new DATA item exported
1092 ebl batch mode cleanup bscan-test is ok now.
1093 kes Implement SD code to check length of disk volume before appending.
1095 kes Correct return status on db_batch... routines.
1096 kes Add call to db_write_batch_file_records() to migration code.
1097 ebl Fix AfterJob timing
1098 kes Move the checking of the database in initializion of the Director
1099 to after we drop privileges. This avoids the need for both root
1100 and bacula access to the DB.
1101 kes Correct a misplaced variable definition in src/filed/backup.c
1102 kes Correct how the new batch insert db_create_attributes_record()
1103 uses the arguments. Caused a seg fault in bscan.
1104 kes Implement lock() and unlock() methods in DEVICE class.
1105 Implement block() and set_block(xx) methods in DEVICE class.
1106 kes Modify bnet_connect() so that it uses time() to check for the
1107 wait time expiring (on some OSes, some system calls may not
1108 return immediately).
1109 kes Modify Verify to obtain the previous JobId when it is actually
1110 running rather than at schedule time (as it was in 1.38.x).
1111 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1113 kes When checking pid in pid file, continue running if the pid is
1114 the same as ours. This occurs on IRIX after a system crash.
1117 kes Extend new GUI API.
1118 kes Make the ua structure a class, and implement send_msg(),
1119 error_msg(), warning_msg(), and info_msg().
1121 kes Apply fix from for building wx-console on the Mac from
1123 kes Implement new select mechanism for GUI programs.
1124 kes Reorganize initialization of stackedWidgets in bat.
1126 kes Add updated nagios plugin supplied by Christian Masopust.
1128 kes More bat implementation.
1129 kes File migrate bug with Pool Occupancy using mediaid instead
1130 of jobids. Fixes bug #795.
1131 kes Fix orphaned buffers in filed backup and verify due to
1132 crypto buffers not freed during errors. Fixes bug #789.
1133 kes Extend new GUI api code to tree commands.
1134 kes Ensure that tree and dot commands check console ACLs.
1135 kes Permit marking directory with trailing slash.
1136 kes Allow 20 console connections (instead of only 10).
1138 kes Add smartctl call to bacula-sd.conf as an example of getting
1141 kes Modify jobq.c to let simultaneous restore jobs run. This may
1142 cause them to fail if they cannot get a drive.
1143 kes Add Client Connect Wait to Storage daemon to permit users to
1144 modify the time the SD waits for a FD connection.
1146 kes Correct virtual changer check which was backwards. This caused
1147 volumes to be unloaded into slots already occupied.
1149 kes Apply Command ACL filter to JobId list in restore command.
1150 kes Correct typeo in var.c patch.
1152 kes Don't let Bacula prune File or Job records for the current Job.
1153 kes Fix variable substitution pad + inc bug reported (with patch)
1156 kes Correct SQLite log table index as reported by Luca Berra.
1158 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1160 kes Begin implementing new comm signals for API.
1161 kes Fix a few places in lib/message.c where the open fd may
1163 kes Continue implementing lib/bsock.c (real class). Make jcr,
1164 who, host, and port private. There are new methods to access
1165 them for non-class use. This required touching a number of files.
1167 kes Add LANG=C to autoconf/randpass so it works with languages other
1168 than English. Fixes bug #788.
1170 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1172 You will not be able to generate Include/Exclude list any more.
1173 It will be fixed soon.
1174 If you want to use this, you can apply
1175 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1177 kes Restore of sockets created false error messages because Bacula
1178 no longer restores sockets, but the code was still trying to
1179 set the attributes on a non-existent file. Reported by a user.
1180 ebl finish RecyclePool feature
1181 Media will takes Pool.RecyclePool
1182 when moving from Scratch to a Pool or when user will do
1183 update volume=xxx frompool
1184 To use it, add RecyclePool = aPool to your Pool resource
1187 RecyclePool = Scratch
1191 kes Expand new BSOCK class adding signal() and new BNET signals.
1192 kes Begin enhancing the dot commands adding a new API function
1193 that returns more information and will make it easier
1194 to interface to the Director from a program.
1196 kes Make DEVICE fd private. Its new name is m_fd, and can be
1197 obtained with dev->fd() outside the class. This is the
1198 first of many DEVICE members to be made private.
1199 kes Implement Michael Renner's idea on having a virtual disk
1200 changer. I made some minor modifications (e.g. I did not
1201 implement the Virtual Changer directive, but simply set
1202 the Changer Command to an empty string.
1204 kes Implement a BSOCK send() method that writes the whole record
1205 in a single write() request rather than in two.
1206 ebl add update volume=xxx recyclepool=yyyy
1207 volume takes recyclepool from pool when using update volume=xxx from pool
1209 kes Fix encryption deblocking bug, which caused some restored files
1210 to be truncated. This fixes bug #763.
1211 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1212 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1214 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1215 ebl Use btime_t instead of uint64_t in media patch.
1217 kes Optimize the use of the database a bit in the Status dir command.
1218 Only open it when needed, ensure that if any previous database
1219 was opened, it is closed.
1221 kes Correct VolCatBytes bug from media patch.
1222 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1223 in the case of orphaned records.
1224 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1225 and File records in 300K chunks to be more efficient. This
1226 idea came from Juan Luis Frances (if I remember right).
1227 kes Apply Eric's scratch patch that moves a purged Volume to
1228 the RecyclePool. Question: how is RecyclePool set? what
1229 happens to the ScratchPool?
1230 kes Apply Eric's media patch that collects read/write media
1231 times as well as byte counts. This patch requires a
1232 simultaneous upgrade of the DIR and SD. Note, there
1233 should be some way to turn off timing. I'm not sure
1234 times are in Bacula units.
1235 kes Apply Eric's batch-insert patch.
1237 kes Update projects list.
1239 kes Implement Include/Exclude file lists in FD as dlists using
1240 the new dlistString class. This permits efficiently having
1241 large include/exclude lists and completes project Item 25.
1242 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1243 console is authorized to cancel the job. This fixes bug
1245 kes Modify SD so that the VolCatJobs medium record is updated
1246 at the beginning of a Job rather than the end. This
1247 fixes bug #775 where exceeding MaxVolJobs caused jobs
1249 kes Added a mutex around getting and setting Volume information
1250 so that multiple simultaneous jobs will single thread.
1252 Switch to using Subversion
1253 kes Remove src/pygtk-console/ from configure
1255 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1256 plus the entrypoints.
1257 kes Apply patch supplied that corrects debug print
1258 in canceling jobs for max run time. Supplied as
1259 part of bug #621, which was previously fixed.
1261 kes Test on job_canceled() and sd_msg_thread_done inside
1262 loop starting the message thread to avoid a race condition.
1264 kes Remove rl_catch_signal from console.c as it conflicted
1265 with the header definition. Fixes bug #765.
1266 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1268 kes Clarify some stored/acquire messages to indicate if the
1269 problem is with read or append.
1271 kes Fix memory leak with storage ids in cats/sql_get.c
1272 kes Terminate watchdog earlier to avoid reference to released
1273 memory -- reported by Jason Austin.
1274 kes Move closing the database from jobq.c to the director daemon
1275 termination routine. This fixes memory leaks for shadow jobs
1276 (i.e. migration jobs).
1277 kes Free up the unique jobid chain items in migrate.c. This fixes
1278 a memory leak problem.
1279 kes Convert some ugly looking for statements to use foreach_alist
1280 in findlib/find.c. This will facilitate converting the structures
1281 to use dlist (for large include/exclude lists).
1282 kes Fix a bug in the btree.c and btree.h routines, then rename them
1283 rblist and add them to be built in src/lib. Include some new
1284 methods written by Rudolf Cejka that make the code more readable
1285 (hides some of the ugly casting).
1286 kes Add set_next() and set_prev() methods which make the code much more
1287 readable. Also add a new dlistString class that facilitates storing
1288 strings in dlists. To be used in the large include/exclude lists.
1289 kes Make some trivial modifications to lib/tree.h that use rblist
1290 rather than dlist for storing the tree links. This was suggested
1291 by Rudolf Cejka. The result of this is that the restore tree now
1292 uses red-black binary trees rather than simple linked lists. This
1293 should give rather dramatic speed improvements for directories
1294 contining large numbers of directories/files (more than 10000).
1296 kes Fix maxruntime bug #621.
1298 ebl Implement the include JobID in spool file name project.
1299 kes Reorder projects file in order determined by Jan 2007 vote.
1300 kes Implement item #12 on project list -- quick release of FD by
1302 kes Fix open of SQLite3 db where user does not have write permission
1303 so that DIR does not crash. Fixes bug #761.
1305 kes Add back missing @ in Win32 Makefile.
1306 kes Change 'Device not configured to autolabel' from INFO
1308 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1309 which should restart an indefinite # of times.
1310 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1311 other DIR specifications.
1313 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1314 Fix path quoting in SQLite scripts.
1315 Fix problems with SHGetFolderPath.
1317 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1319 kes Fix Job restart on error bug that promotes an Inc to a Full
1320 backup. This should fix bug #755.
1321 kes Add qt-console and first cut of code.
1325 kes Fix Bacula->Documentation link on Win32 to point to index.html
1326 instead of bacula.html. Fixed bug #750.
1327 kes Return JobId in db_get_job_record() when JobId==0. This should
1329 kes Do not release source pointers when restarting a failed job.
1331 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1332 This *should* fix bug #747.
1333 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1336 kes Modify USTORE constructor to set an empty store_source string,
1337 and don't copy the store_source string in a cancel. Hopefully
1338 this will fix Arno's seg fault, bug #744.
1339 kes Add back code to disable conio in configure. Fixes bug #743.
1340 kes Correct the Options scanner in the FD to correctly handle
1341 SHA1 option, which was eating the next option. Reported by
1343 kes Add code to indicate when the SD is spooling, spool wait, and
1344 despooling as requested by Alan Brown.
1346 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob