1 Technical notes on version 2.3
5 kes Start implementation of VTL code
6 kes Fix Win32 build after adding new cats subroutine.
8 kes First cut at Duplicate Job implementation.
10 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
11 kes Start PluginOptions string, and refactor a bit of ua_run.c
12 ebl Apply Allan patch that permit to reset recyclepool.
14 kes Test patch -- possible fix or improvement for bug #1053
15 kes Refactor FD and SD status commands to permit new API code in
16 SD, and to fix Win32 build.
17 kes Win32 build is now working.
19 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
20 some ideas in patch from Scott Bailey.
21 kes Begin implementation of duplicate Job control.
22 kes Fix some of Win32 build after recent additions.
23 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
24 which causes the FD to detect whether or not the OS has the
25 honor no dump bit (*BSD systems), and if so, to skip backing up
26 any file with this bit set. The feature is enabled by setting
27 'honor no dump flag = yes' in the Options section of a FileSet.
29 kes Correct po warning message with datarootdir
30 kes Implement more code in dird.c to put configuration parsing in
31 a class rather than use globals.
32 kes Restructure SD status command for implementation of bat API
35 kes Suppress incorrect 'Will not descend from x into y' messages.
36 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
37 daemon globals used by parser.
38 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
40 kes Fix free of plugin_list when none exists.
42 ebl Apply accurate project patch.
44 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
45 on non-mempool object)
46 kes First cut of converting FD .status to work with bat API.
48 .status client=XXX header
49 .status client=XXX running
50 .status client=XXX terminated
51 kes Implement first cut of Copy Job.
52 kes Implement Catalog in Pool resource. It overrides catalog specified
53 in the Client resource.
55 kes Apply patch (with some difficulties) from Joao Henrique Freitas
56 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
58 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
59 ftruncate() actually works. In the case of some (cheap) NAS devices,
60 it does not, and so recycling NAS Volumes does not work. The code
61 simply unlink()s the file, then recreates it. This fixes bug #1011.
63 kes First incomplete cut of big malloc blocks for htable.
64 kes Tweak plugin code.
66 kes Plugin debug code + tweak a couple bat dialog layouts
68 kes Fix creating first JobMedia record during Migration to include
69 proper index. This caused slow restores of migrated jobs.
70 kes Temp fix to plugin name file_index.
71 kes Bacula backed up and restored a MySQL database.
73 kes Implement plugin restore.
74 kes Implement parsing of db_driver to give db_type index.
76 kes First cut of plugin restore code.
77 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
78 and do not strip paths on symbolic links.
79 kes Set catalog backup database and user name from values specified on
81 ebl Fix #1031 about wrong pool source information in job report.
84 kes Remove a redundant jcr argument to find_files, match_files, and
86 kes Implement '.status dir header|scheduled|running|terminated' that
87 prints the requested status section. With the exception of the
88 header, the other reports have fields separated by tabs (\t).
90 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
91 a resource embedded run command to find a since time if no explicit
92 since time was supplied on the command line.
93 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
94 that updates the state file at job termination time in addition to
95 when the daemon terminates.
97 kes First version where a plugin did a backup.
98 bpipe-fd.so created a backup file, wrote a test
99 string to it, and Bacua could restore this fabricated file.
101 kes Implement DB Driver = string for the DBI driver.
102 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
103 kes First cut of code for loading Win32 plugin dlls. Implement
104 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
105 and implement a dlfcn.h file based on opengroup's definitions of
108 kes First cut plugin directives.
110 kes Apply patch from bug #1049 to prevent stripping the path on a
112 kes Attempt to fix bug #1047 where stripping a path corrupts the
113 heap. Waiting for feedback.
114 kes Correct the Mount message not to suggest labeling a new tape
115 when doing a restore. Submitted by email by John Stoffel.
116 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
117 FD by using casting. Reported in bug #1042.
119 kes A bit of crypto cleanup. More later.
121 Release Version 2.2.8
123 kes Apply patch from Martin to correct bug #1040, bscan sets existing
125 kes Fixed important spelling error in doc -- bug #1045.
127 ebl Fix bextract to be able to extract non-portable Win32 data to
129 kes Move initialization of read/write res lock earlier in the code.
130 This fixes the crash with a null conf file. This fixes bug
132 kes Redefine CURES in lib/parse_conf to be URES and move it all
133 into lib/parse_conf.c -- this responds to bug #1042, but does
134 not fix it. The fix is not to compile with FORTIFY_SOURCE.
135 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
136 the trunk SVN. I don't think this was reported as a bug.
138 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
140 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
142 kes Add DataDespooling and DataCommitting status (committing is
143 the last despooling).
144 kes Finish implementation of new reservations code noted below.
146 kes Fix bsnprintf for float point numbers. I broke recently when
147 parameterizing some variables. This fixes bug #1036.
148 kes Undo recent reservations changes ... will apply them later
149 when they work better.
151 ebl Fixes #1034 which cause mysql to hang the connection after 8h
152 ebl Change default statistics target of filename.name and path.path
153 fields for PostgreSQL. This speeds lookup by indexes. Thanks
155 kes A few more tweaks to new reservation code. Make sure to clear
156 vol released flag when retaking volume. When reading label and
157 label is bad mark volume unused. When recycling, mark volume
158 unused so it can be renamed.
160 kes Fix reserve_volume() so it doesn't release a volume in use
161 (i.e. a volume entry not marked released). This should be
162 the last part needed to fix bug #1018.
164 kes Move Heartbeat documentation from Job to Director resource.
165 This fixes bug #1033.
167 kes Fix existing switch drive SD code to call autochanger to release
168 any old volume. This must be done to keep the autochanger from
169 releasing subsequently newly reserved volumes in doing a close().
170 This should fix bug #1018.
171 kes Fail if attempting to get console input in batch mode. This
172 should help fail RunScript console commands that are incomplete.
173 kes First cut implementing switch_drive() in SD (not actually called).
175 kes Implement first cut running console commands in a RunScript.
177 ebl Fixes bug #1028 where 'Selection Type' option was not usable
179 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
182 Release Version 2.2.7
184 kes Add new free_tls() entry point so that Win32 builds.
185 kes Fix compile warning in src/lib/util.c
186 kes Fix entry point for edit_job_codes() so that Win32 builds.
187 kes Fix seg fault Frank Sweetser reports in regression testing
188 on his systems. The problem was that the original author of
189 bsnprintf.c did not take into account the side effects of
190 using ++x in the argument to a #define.
191 kes Make SD protocol backward compatible with version 2.2.x.
193 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
194 because Bacula no longer restores sockets.
195 ebl Always use ignorecase fileset option on win32 FD.
197 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
198 that implements double quoting include names in conf files,
199 and also allows piping input by having the first character
200 be a vertical bar (|).
201 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
202 that implement %f in RunScripts to pass the FileSet name.
203 kes Skip leading | when lex input comes from a pipe as suggested
204 by Michael Stapelberg <michael@stapelberg.de>.
206 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
207 Nerijus Baliunas <nerijus@users.sourceforge.net>
209 kes Implement Plugin Directory and plugin events.
211 kes Implement a security enhancement: TLS authentication but no
212 encryption. Enabled by setting 'TLS Authentication = yes'.
213 Note when this is on, TLS encryption is turned OFF!
215 kes This patch corrects a problem where the maximum concurrent storage
216 jobs counter gets out of sync during restore jobs causing jobs to
217 'wait on max Storage jobs'. This patch fixes bug #1009.
219 kes This patch fixes bcopy so that it produces correct Volumes.
221 kes This patch eliminates spurious output to the console during a VerifyVolume
222 job that contains encrypted data. It fixes bug #1024.
224 kes This patch prevents the 'status dir' command from trying to use a scratch
225 volume and possibly moving it from one pool to another. This patch fixes
228 kes Add new include to postgresql.c suggested by Marc Cousins so
229 that it compiles correctly with pgre version 8.3.
231 kes Fix --archivedir addition to configure. Replace it with
232 --with-archivedir in configure.in This fixes the regression
234 kes This patch fixes bug #1012 where the job is canceled because
235 of Max Run Time exceeded when the job has not yet started.
237 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
238 one 'part' to write. Instead of each part being stored on disk,
239 written to DVD, then deleted from disk, all parts are written to disk,
240 and only the last is written and deleted from disk.
241 kes This patch fixes the status command to include the formating string for
242 JS_AttrInsterting. It fixes bug #1021.
243 kes This patch should fix the Mac OS X build problem on the latest
244 Darwin, where sys/types.h was not included correctly (apparently
245 due to a change in the Mac headers). The solution was to explicitly
246 ensure that it is defined for the ./configure.
247 This patch also has a rebuild of configure that includes the Debian
248 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
249 kes This patch should ensure that queued messages to the console are
250 displayed as soon as possible. It should fix bug 1007, but has been
251 reported not to work.
253 kes This patch fixes the infinite loop when trying to increase the
254 maximum number of volumes in a Pool during the add command.
255 This patch fixes bug #1008.
257 Release Version 2.2.6
259 db Remove extra data on estimate command in joblist for bat.
261 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
262 really change anything, but is the beginning of doing it *right*.
263 To do it completely right the LastWritten date must be passed to
264 the SD, but it is not yet done.
265 kes Minor tweaks to some bat restore SQL.
266 kes This patch fixes bug #1003 where putting the message output from
267 a Verify job into the catalog results in a recursive loop. The problem
268 seems to show up only with postgresql (to be verified).
269 kes Correct %x to %p in postgresql debug statement.
271 kes Fix bug #942 where lots of emails where generated when the heartbeat
272 interval was low and Bacula wanted a different tape from the one in
275 ebl Add new SD despooling attributes and Dir inserting attributes
276 job status codes in the catalog (Status table).
278 ebl Use qmake-qt4 instead of qmake when available (debian system).
280 kes Add a security warning to src/cats/make_catalog_backup.in indicating
281 that passing the password via the command line (arg 3) is insecure.
282 This responds to bug #990 (it doesn't fix it).
284 kes Set default debug_level to zero. This corrects bugs #991 and #993.
285 kes Fix a crash in bat when it cannot connect to the Director for example
286 if the Director is not running.
287 kes Remove redundant INDEX (JobId) from File table in the trunk.
289 kes Make explicit exception to GPL in LICENSE to permit linking
290 the Win32 FD with Microsoft VSS code.
291 kes Apply the Solaris package patch from
292 Masopust, Christian <christian.masopust@siemens.com>
293 kes Apply the patch to optionally add a timestamp in the debug output
294 submitted by Mariusz Czulada <manieq@wp.eu>.
296 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
297 backend (sql_strerror). Fixes bug #989
299 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
300 It applied with no problems.
301 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
303 kes Redirect stderror to stdin on mt status command in mtx-changer.in
304 since the status is returned on stderr on Solaris.
305 kes Activate Close button on tray-monitor window. This fixes
307 kes Check for NULL item in parse_conf.c before calling it. In the
308 case of Device, there is no item and this caused a seg fault when
309 Device appears in the conf file.
310 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
311 avoids pulling in config.h multiple times in some new code.
313 kes Fix spurious warning message printed when creating a volume with
314 a LabelFormat. This fixes bug #976.
316 Release Version 2.2.5
318 kes Add JobId in place of Job name in all the Jmsg() output.
319 kes Correct the APP_DESC for the Win32 storage service (remove an e).
321 kes Make maxvol-test and new more strict maxvol2-test work.
322 kes Print JobId in all Jmsg() job output.
324 kes Add new SD despooling attributes and Dir inserting attributes
325 job status codes. This fixes bug 961.
326 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
328 kes Fix doc issue. This fixes bug #963.
329 kes Fix listing performance problems in bat. Pointed out by
331 kes Remove old debug code.
332 kes Fix bat code that tests for Win32. This should fix bug #968
333 kes Query 5 list wrong Vol after migration. This fixes bug #960
335 ebl Fix #969 where user can't change Replace option in restore menu.
337 kes Save jcr in thread specific data (tsd) for each thread.
338 kes Make Dmsg() print JobId as -%u.
339 kes Make Jmsg, Emsg, and others automatically pickup the jobid
340 for the thread if it exists.
341 kes Remove old reservation debug jid code.
342 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
343 ebl Add an option that permit to specify spool size in job
344 definition. (Applying patches/testing/spoolsize_per_job.patch).
345 You must upgrade SD and DIR at the same time.
346 dvl Add new configuration item --archivedir
347 dvl Adjust regression tests to use tmp not /tmp. This will allow
348 multiple concurrent runs of the regression tests.
350 kes Fix race condition that drops final block written to volume.
351 This happens in rare cases with multiple simultaneous jobs
352 when the Volume fills. This fixes bug #964. May be related
353 to bug #935 and possibly #903.
354 kes Eliminate more strerror() and replace with bstrerror().
355 kes Remove BSD getopt and replace with unrestricted IBM version.
356 kes Fix Win32 build for changed calling sequences.
357 kes More tweaks to the mount volume routines to get everything
358 right. Changed variable name from find to have_vol, which is
359 much easier to understand.
360 kes Enhance btimer debug code.
362 kes Fix FD->SD authorization failure, which was due to spurious
363 wakeups from a pthread_cond_timedwait(). Simply check the
364 predicate before continuing. This fixes bug #953.
365 kes Add const char where needed (more to do). Remove temp debug code.
367 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
368 kes Don't overwrite error message in check_tables_version.
370 kes Unlock batch insert tables with same calls used elsewhere.
371 kes Allow starting 59 jobs a second.
372 kes Make SD session key more random.
373 kes Add retry for SQLite opening db if it fails. Probably helps
375 kes Suppress extra error messages during batch insert failure.
377 kes Add jcr to timer packets so if killed message can be sent to job.
378 kes Add JobId to all Dmsg() output.
379 kes Put some FD auth code on dbglvl rather than fixed.
380 kes Return insert attributes error message in db msg buffer to avoid
381 false error messages. Helps fix bug #966.
382 kes Separate batch init error messages. Probably helps fix bug #966.
383 kes Make SD code that contructs attribute insert check string lengths
385 kes If Dir gets an error during inserting attributes, cancel SD.
386 This reduces unnecessary error messages.
388 kes Correct search boolean for getting Volume info
389 ebl Cleanup batch insert code. Probably fixes bug #965.
390 kes Back out one small change to the reservation system (reserving a volume).
391 kes Rework how a Volume is mounted. It is now much more intelligent and
392 will always attempt to use any mounted volume if possible and reduces
393 calls to the Director asking about volumes.
395 kes Turn off some code when batch insert not enabled.
396 kes Edit FD name in connect error messages.
397 kes Rework the reservation system to take into account that the Director
398 might give us a Volume that is different from the current one being
399 used, and to ensure that we don't exceed Maximum Volume Jobs.
400 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
401 fatal error with multiple jobs running'
402 kes Add more debug code in reservation system.
403 kes Implement maxvol-test to check bug #947.
405 kes Add code to handle tray monitor separated from Win32 FD.
406 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
408 kes Add missed return in fixing verify bug -- trunk only.
409 ebl Fix a command parser issue causing a director segfault.
410 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
412 kes Increase the max block size to 4MB fixes bug #957.
413 kes ERABT if user sets min block size > max block size. Fixes bug #956.
414 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
415 is not properly mounted (recognized) during a poll.
416 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
417 Job that has differences reports Verify OK.
418 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
420 ebl Add an option to operate on all pools with update vol parameters.
421 This complete the project 20. Patch from Nigel Stepp.
422 ebl Add history support to bconsole when using readline.
423 Using Ctrl-D to exit doesn't update .bconsole_history
424 kes Modify new volume algorithm to use max MediaId for generating next
425 volume number rather than the count of Volumes. This should essentially
426 eliminate the failure rate if some volumes were deleted. Bug #921.
427 kes Begin implemention of Optimize Job Scheduling.
428 kes Implement restore callback that Dirk and I agreed on for bat
429 restore. This fixes bug #928. Restore of backup of zero files fails.
430 kes Fix SQL Catalog logging which broke with new db_escape_string
433 Release Version 2.2.4
435 kes Fix bacula_cats.def for new db_escape_string().
436 kes Increase size of name string when FD making connection to SD.
437 May fix bug #953. FD->SD connection failure.
439 kes Add code to help Dan debug 2drive-incremental-2disk test.
440 kes Add code to try to fix bug #908.
441 kes Add waits to multiple exit detection code to try to force pid
442 file to always be deleted.
443 kes Restore good dev.tar.gz to rescue set appropriate binary property.
445 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
446 trying to switch drives by checking for blocking before unblocking.
448 kes Cancel storage daemon in all cases where FD reports error. This
449 should fix virtually all cases of bug #920.
450 kes Fix db_escape_string() for MySQL which did not compile.
452 kes Fix error message that was clobbered when Dir tells SD it does not
453 have write permission on Volume. This should fix a minor point
454 in bug #942, but not the main problem.
455 kes Add code to cancel job in SD if FD connection fails. This should
457 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
458 dvl Pass jcr and db into db_escape_string() to enable better escaping
460 kes Fix migration code to get correct Volume name with multiple volumes
461 by skipping |. Fixes bug #936.
462 kes Implement patch supplied by Landon to fix bug #944 where using
463 TLS with bconsole uses 99+% of the CPU.
464 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
466 kes Move patches into patches directory.
468 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
471 ebl Using 'm' in bconsole will show messages like before,
472 and not memory usage.
473 kes Fix bug #935, and probably also bug #903 where files were not
474 restored. MediaId was not properly set in JobMedia record after
477 kes Suppress chown and chmod error messages if the FD is not running
480 kes Apply Martin Simmons' patch that should turn off the new API usage
481 when batch insert is turned off allowing building on older
483 kes Add ./configure search in qwt-qt4 for qwt package
485 kes Bacula is now free of 3rd party GPL copyrighted code!
487 kes Add guid_to_name.c/h which replace idcache.
488 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
490 ebl Detect if new PosgreSQL batch insert API is present.
491 kes Correct incorrect mempool call causing Director crash. Occurs on
492 systems without va_copy().
493 sb Update spec files for 2.2.1 release
495 kes Fix memory pool call in ua_output.c. bug #934.
496 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
497 Add test program to fnmatch.c
499 kes Integrate patch to README.vc8 from
500 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
501 edit it to get it into Unix patch format.
502 kes Implement mkpath.c to replace old FSF makepath.c
504 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
506 Release Version 2.2.1
508 kes Update POTFILES.in
509 kes Cleanup a few underquoted AC_DEFUNs in configure
510 kes Apply patch from Martin Simmons that adds a test for va_copy to
513 kes Fix bug #921 by increasing the number of tries to create a new volume
515 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
516 can be called multiple times. Implement a version for machines
517 without va_copy() that gets a big buffer.
519 kes Integrate more portable zone offset code into bsmtp.c
520 Submitted by Attila Fülöp.
522 kes Fix bad SD->FD return status reported by
523 (James Harper) <james.harper@bendigoit.com.au>
524 ebl Fix a bug in read_close_session which return random status
525 thanks to James Harper
527 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
528 and directory names during restore of single file/directories.
529 kes Add sanity checks to .sql command when string is empty. Hopefully
530 that will resolve Dirks Director crash.
532 kes Apply patch submitted by Martin Simmons that corrects a seg fault
533 in the bsmtp chat subroutine when debug is >= 10.
535 kes Fix Director crash when running bat SQL queries.
536 kes Add David's notes on Item 8: Copy pools.
538 kes Rework projects file to be current and ready for a vote.
539 kes Enhance lex scanner error message.
541 kes Tweak LICENSE file to mention BSD code.
542 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
543 if specified on the ./configure.
544 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
545 This class is intended to allow us to open a second bsock to the
546 Director while in the restore subdialog.
548 kes Fix configure to create bat Makefile before creating dependencies.
549 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
550 kes Add a tooltip to the tray monitor.
551 dvl Set the Director's PID file before dropping privs. This fixes
554 kes Update AUTHORs file
555 kes Increase the default max concurrent jobs to 20 in FD and SD to
556 correspond with the default .conf files.
557 kes Rewrite the Win32 service routines. This eliminates the 3 copies
558 some different, of the same file created by RN when porting the
560 kes Rearrange some of the Win32 directories and the placement of the files
562 kes Set DEVELOPER flag in version.h
564 ========================================================================
565 Release Version 2.2.0
567 kes Apply a second doc patch from Marc.
568 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
569 improves the tips section that discusses how to setup multiple
572 kes Update bat README file.
573 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
574 corrects a typo in the Recycle status check in db_find_next_volume().
575 This will probably fix a number of annoying problems with multiple
577 kes Modify most of dird/msgchan.c to use bsock class calls rather than
578 bnet calls -- no functionality change.
580 kes Modify the Verify output to specify if files are missing on
581 the Volume(s) or disk. Fixes confusion in bug #916.
582 kes When more than one Volume is read in a migration job, the last
583 Volume bytes reported are from the last read volume rather than
584 the last written volume. Fixed. This fixes bug #910.
585 kes Fix display of Recycle flag after update volume=foo recycle=yes.
586 It previously printed New Recyle flag is: no. This fixes bug
589 kes Correct seg fault when switching tape drives during restore.
590 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
591 be used until after 2.2.0 release.
593 kes Remove fnmatch() in SD that permitted wild card specifications.
596 kes Fix %g in filename returned by SQL for browse tree reported by
598 kes Fix configure so that it puts config.out in the cwd rather than
600 kes Attempt to fix the locking problem reported by Eric in bug #906.
601 kes Make berrno class to leave errno unchanged after constructor call.
602 kes Make bnet_server use the heap rather than the stack to allocate
603 its socket fd pointers to avoid a crash at termination. Problem
604 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
606 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
607 and putting it in depkgs-qt along with Qt4.3.
609 kes Rework code in acquire.c that switches drives for reading when
610 the Media Type does not match. This should fix bug #906
612 ebl Fix a director segfault during job setup #907
613 kes Correct seg fault in postgresql when first operation returns no
614 rows. Fixes Dirks File browser problem seg fault with bat.
616 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
617 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
620 kes Implement PopUp YES/NO dialog for bat.
622 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
624 kes Correct RunScript to terminate job in FD on failure.
625 kes Change abort_on_error and AbortJobOnError to fail_on_error
626 and FailJobOnError in RunScripts.
627 kes Minor tweaks of code formating in RunScripts, principally to
628 avoid depassing 80 columns.
630 kes Eliminate one #ifdef Win32 in bsmtp
631 kes Implement grow tool to grow a file for testing very large databases.
632 kes Add big-vol-test to test Bacula seeking with > 5GB.
635 kes Modify find_next_volume() to return all values in Media record.
636 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
640 kes Update Release notes
642 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
643 Warning, in previous beta version, all media get from scratch keep their
646 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
647 This should fix bug #842. Made a note to look at removing the temp
648 files at the end of the install.
649 kes Add ability to mount and unmount a file device providing it is
650 marked as being removable and has the appropriate mount and unmount
651 commands defined in the Device resource. This fixes bug #830.
652 kes When applying a storage override, release all previous storage
653 definitions rather than just prepending the new storage.
654 This should prevent a good deal of confusion.
656 kes Implement ./configure search for qwt libraries.
658 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
659 Win32 FD. This should fix bug #893.
660 kes Remove an unnecessary beep in Win32 init code.
661 kes Update copyright dates in Win32 executable about boxes.
662 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
663 code with a BSD getopt.c and getopt.h.
664 kes Remove sched.h from the Win32 compat directory -- not used.
665 kes Remove the Exit menu item from the Win32 tray monitor. If you really
666 need to shut it down, do it through the services panel or the command
668 kes Remove some inappropriate Bacula FSFE copyrights.
669 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
670 kes Fix regress config non-portable test as pointed out by
671 Florian Heigl <florian.heigl@gmail.com>
672 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
673 as pointed out by Florian Heigl <florian.heigl@gmail.com>
675 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
676 Reported by Frank Sweetser.
680 kes Fix client-only build.
681 kes Integrate client-only fixes for bsys (initgroups) and conio from
682 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
683 kes Make arguments to get_scratch_volume() in same order as other
685 kes Rework the prune_volumes() subroutine so that after purging and
686 no volume found in desired pool, it will check for a scratch
687 volume. This prevents recycling the whole scratch pool.
688 kes Add code to status storage to print boffset_t (largefile support).
690 kes Move qwt (Graphics libarary for Qt4) to depkgs.
691 kes You now need a --with-qwt=<dir> to be able to build bat.
692 kes Update src/win32/cats/bacula_cats.def to include the new
693 db_get_query_dbids() call on Win32.
695 kes Correct a problem when selecting a scratch volume and moving
696 it to another pool that lost some columns.
697 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
698 kes Enhance Autochanger error messages to include Volume and device name.
699 kes Rework prune_volumes() code to take account of InChanger flag,
700 and to handle recycling volumes going to the Scratch pool and
701 current pool because the RecyclePool directive.
702 kes Implement a better and more efficient db_get_query_dbids() to
703 handle creating and passing back a list of DBIds.
707 kes Start work on new more efficient DBId subroutine. First use
708 will be for recycling volume to Scratch inchanger.
709 kes Increase number of JobIds in pruning from 1000 to 10000.
710 This to be replaced by above routine.
711 kes Begin implementation of building Qt4 on Win32.
712 kes Correct typo in fix I added for bad TLS shutdown.
713 kes Pull 2.0.3 patches into patches directory.
714 kes Update Release notes. Include qt-console in line count.
715 kes Update Projects file.
717 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
718 bug in migration code where a job that spanned two volumes
721 kes Implement new BST_DESPOOLING blocked state. Change from locking
722 during despooling in SD to blocking. This means that other threads
723 can work with the device structure, in particular the reservations
724 system while despooling.
726 kes Fix return in reservation message queue that missed clearing
727 the jcr lock (implemented 26Jun07 below).
728 kes Rename a number of dev methods to make locking function names
730 kes Document locking in lock.c. Move lock structures to new file
733 kes Move reservations message lock to lock jcr only this
735 kes Move main SD locking code into lock.c (new file).
736 kes Update Win32 build to include lock.c
740 kes Dirk committed the qwt library code for drawing graphs in bat.
741 kes Tweak install of qwt so that it is integrated with ./configure.
743 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
744 out by Eric (my typo).
745 ebl Fix configure.in to get batch mode enable
746 kes Return correct string from authenticate.cpp in bat when connecting
748 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
749 spurious line drops when using TLS.
750 kes Do not file reparse points when restoring a file that already
753 kes Implement Windows reparse points -- similar to directories, but
754 we do not descend into it. This is a first cut. They seem to
755 be backed up, but restore is not yet tested.
756 kes Remove restore_blocking in tls code when shutting a socket to leave
757 it in blocking mode. Hopefully this will fix the encryption bug
758 reported by Frank Sweetser.
759 kes When opening a file for backup, tell the OS that we are going to
760 read it sequentially -- optimization.
761 kes Change variable names in authenticate_director() to not conflict
762 with member names in bat. Caused great confusion with compiler,
765 kes Queue openssl error messages in case of comm problem.
766 kes Do shutdown() call if socket terminated.
767 kes Remove some duplicated code in tls.c
768 kes Move more of the bsock member variables into private and access
770 kes Add Frank Sweetser's tls-test to the regression suite.
772 kes Add Swedish sv.po file
774 kes Don't print clock skew message in FD if less than 3 seconds diff.
775 kes Add a bit of VSS info to status client.
776 kes Implement a first cut of Vista VSS, using Win2003 code.
780 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
781 loaded tape but uses first drive).
782 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
783 This was indeed a Win32 issue.
785 kes Simplify search of autochanger for in-use Volume.
786 kes Fix exit condition of check for in-use volume. kes Remove
787 inappropriate my_postgresql_free_result() in db_close()
789 kes Fix bad return in FD when encryption signature not found.
790 Probably caused a crash.
791 kes Inhibit missing encryption signature error messages for
792 file types where no signature computed.
793 kes Correct inverted check on autochanger in reservation system.
794 kes Tweak debug code in autochanger reservation.
796 kes Add some additional locking in the cats directory in subroutines
797 that modify packet variables called from batch insert.
798 kes Rework how dcrs are allocated. new_dcr() can now be called
799 with an existing pointer, and it will simply clean it up.
800 This allows the reservation system to test various different
801 devices, and will permit easy device changes.
802 kes A bunch of changes all over to handle new new_dcr() calling
804 kes Work more on the Volume management in the SD. Remember Volumes
805 for tape drives and for autochangers (even virtual disk changers).
806 kes When looking at the Volume list to reserve a drive, handle
807 autochanger names correctly by interating through the changer
808 devices. Also call the Director to see if a Volume is suitable
810 kes Fix some bugs in bscan. Make sure all media records are written.
811 Make sure that valid JobMedia records are written for disk files.
812 Previously they were completely wrong.
813 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
814 that the URLs don't change and so that the developers will all
815 work off the same copy. Rebuild from scrach.
816 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
820 kes Fix seg fault in FD from incorrect digest size.
821 kes Fix argument to non-OpenSSL crypto.c subroutine.
825 kes Remove a few malloc()s from the encryption code.
826 kes Use the class calls to bsock in filed/backup.c and restore.c in
827 place of the old bnet_xxx code.
828 kes Implement code that does an on the fly calculation of the
829 signing digest during restore of encrypted files. It makes
830 a best guess at the algorithm, and if it is not correct, will
831 then revert to the old code which reads the file after it is
833 kes Implement at least one missing crypto stream in stream_to_ascii()
834 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
835 #877 where a reload with bad syntax causes Dir to exit.
837 Cut: 2.1.14 beta (not released)
839 kes Do not free a volume on a tape drive until another volume is
840 mounted and read, or the autochanger unloads the volume.
841 This should help the SD re-use volumes that are already mounted,
842 and should fix bug #886.
843 kes Apply patch from user brettedgar that allows gnome2-console include
844 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
845 kes Apply patch from Lucien Weller that fixes day of week calculation
846 because of DST flag problem. Fixes bug #887.
848 kes Move find_next_appendable_volume() to after acquiring a valid device
849 in reserve.c. This fixes bug #864 -- confirmed by reporter.
851 kes Unable to reproduce bug 872. However added additional testing for
853 kes Bug #874 resolved by documenting SQLite limitations.
854 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
855 kes Bug #881 resolved by removing typo in mtx-changer script.
856 kes Made Frank Sweetser's wiki the official Bacula wiki with his
857 approval. Added a link to the wiki on the web page, and implemented
858 a backup from http://paramount.ind.wpi.edu
860 kes Fix update allfrompool to pass pool name.
862 kes Convert to pure GPL v2 license.
863 kes Fix sscanf problems reported by Peter Buschman that caused
864 a bus error on Solaris.
865 kes Rework (simplify) the select prompt in bat.
866 kes Move get_jobid_from_tid() into lib and create a
868 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
869 should definitely fix the problem of lost error messages in the
871 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
872 kes Eliminate tcpd.h from the project. Enclose the #include from the
873 library with extern C ...
874 kes Add print of signal name when a signal is trapped.
878 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
880 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
881 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
882 makes SQLit3 run 30 times faster, though a bit less safe.
883 kes Implement --with-batch-insert in configure and detection of thread
884 safe libraries. It is on by default, but turned off if no thread
885 safe library (e.g. SQLite 2) is available.
887 kes Fix Bacula PostgreSQL buffer overruns.
888 kes Do better checking for NULL results returned from PostgreSQL;
889 implement retry for failed queries; clear results buffer after
890 failed query. Hopefully this will correct the PostgreSQL failures.
892 kes Implement algorithm to handle only one appendable volume with
893 Prefer Mounted Volumes = no.
894 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
895 returned from a query.
896 kes Make volume lock recursive.
897 kes Implement an additional volume reservation algorithm that
898 starts by considering all reserved volumes then uses the
899 old brute force algorithm of searching the resources to
900 find a suitable device.
901 kes Add new reservations debug code and refine the old code.
902 kes Update the win32/dll/bacula.defs file.
904 kes Tweak reservations algorithm to permit a few more cases, i.e.
905 volume reserved, but on different drive, ...
906 kes Enhance SD status to include Pool and Media Type for drive in a
907 more readable format (a bit longer).
908 kes Fix PostgreSQL double free.
910 kes Minor refactoring of restore decryption code.
911 kes Add code to smartall.c to detect double free of a buffer.
913 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
914 so that bsmtp will create a correct email address (mailbox only).
915 kes Modify 'memory' command so that the buffers are listed as 'In use'
916 to avoid confusion with Orphaned buffers.
917 kes I reworked the OpenSSL include/lib flags to be handled in
918 the standard Bacula way, which should fix bug #863 concerning
919 non-standard OpenSSL libraries.
921 kes Implement Help Browser window for bat.
922 kes Fix reload bug that reset StorageId to zero.
924 kes Fix TLS #ifdefing when TLS turned off.
925 kes Ensure that when labelling a tape with Slot=0 that InChanger
927 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
929 kes Add StartTime to final uar_sel_jobid_temp query so that we can
930 add DISTINCT (required by PostgreSQL).
931 kes Implement BSOCK authenticate_director() method. Eventually will
932 authenicate all daemons.
933 kes Move several more functions into the BSOCK class.
935 kes Add code to tell the OS that we no longer need a cached
936 file that we were reading. In findlib/bfile.c. Also,
937 only cache files that we are reading. Thanks to
938 Tobias Oetiker <tobi@oetiker.ch> for the idea.
939 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
940 kes Implement script to automatically generate cats and dll .def
942 kes Update README.mingw32 to include new .def file generation.
943 kes Correct typo in UTF-8 error message as reported by:
944 jhernandez <julianhernandez@gmail.com>
945 kes Add additional sm_check() code on debug level 1.
946 kes Set default debug level to 1.
947 kes Trap SIGABRT in attempt to get traceback.
949 kes Reduce bat connect timeout from 30 to 15 seconds.
950 kes More restructuring and implementing BSOCK class in place of
952 kes Remove a few unnecessary malloc() tests in crypto code.
953 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
954 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
955 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
957 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
959 kes Fix Verify InitCatalog. The attributes were not pointing to the
960 correct saved location.
961 kes Implement message callback so that GUI is sure to get all
962 daemon messages. Currently displayed in a dialog in bat.
963 kes Ignore SIGUSR2 (Bacula timer) in bat.
964 kes Apply regress patch from bug #859 to allow regress to work
965 with Solaris compiler.
967 kes Begin adding TLS support to bat.
968 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
969 clean up lex.c and make it more readable.
971 kes Move more bnet functions into the BSOCK class.
972 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
973 kes Complete change of berrno strerror() method to bstrerror()
977 kes Cleanup incorrect email addresses in bsmtp.
978 kes Make bat display initial messages rather than discard them.
980 kes First cut of adding .mod to the run command.
981 kes Implement auto display of messages in bat.
982 kes Enhanced preferences to allow all Bacula output to be
985 kes Try to make bsmtp date routines more generic.
986 kes Fixed bug #856 autochanger documentation.
987 kes Rework bsmtp date editing for Win32. This fixes bug #854.
988 kes Add new cats entry point so Win32 builds.
990 kes Attempt to fix bsmtp date editing on OSes without %z editing.
992 kes Do better checking for the MySQL 64 bit libraries looking for both
993 .a and .so libraries.
994 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
995 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
996 kes Require the thread safe version of MySQL during configure. Thanks
997 to Andre Noll for pointing this out.
998 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
999 continuing in migration code.
1000 kes Apply implementation of tray-monitor font derived from gnome-console
1001 submitted by Andreas Piesk <a.piesk@gmx.net>
1003 kes Eliminate important memory loss in SQLite
1004 kes Fixed the batch insert MySQL thread specific data that was not
1005 being freed. See cats/mysql.c:db_thread_cleanup().
1006 kes Fix restore before command.
1007 kes Convert old hdr.name to name() in a few places.
1008 kes Implement update jobid command.
1009 kes Return all time_t dates in db_get_job_record()
1010 kes Stop watchdog in SD earlier.
1011 kes Put Pool just after Storage in please mount message.
1012 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1015 kes Update the po files.
1016 kes Fix Verify InitCatalog by making it cache attributes.
1018 kes Change name bacula-bat to bat for man 1 page to correspond to
1020 kes Check for client and store NULL pointers in status command. This
1022 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1023 kes Fix sign extended editing of %p.
1024 kes Clean out a little old #ifdefing in cats/mysql.c
1026 kes If time diff between DIR and FD is more than 600 seconds convert
1027 INFO message to WARNING.
1028 kes Implement heap size display in status for all daemons.
1029 kes Attempt to fix MySQL db open memory loss (not successfull).
1030 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1031 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1032 Query. This looks like a MySQL but but by doing extra releases,
1033 the memory goes away. This should fix bug #847.
1035 kes When backup fails, cancel SD before waiting for sd termination.
1036 kes If SD is waiting for FD to connect during cancel, wake up the
1038 kes Fix fsf code so that errno is correctly reported.
1039 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1041 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1042 so that Bacula doesn't later stumble into a seg fault.
1043 kes Use the term Restore Client in the restore Job report.
1044 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1045 the original job's FileSetId.
1046 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1047 spooling in migration jobs. Not yet tested.
1048 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1049 reading conf file from a pipe. However, do it with open_bpipe()
1050 rather than popen. Not yet tested.
1052 kes Fix an ugly bug where the VolCatBytes were getting updated
1054 kes Implement bconsole memory command that prints current memory
1055 usage, plus smartalloc dump.
1056 kes Clarify some error messages in backup, admin, and migrate.
1057 kes Shrink label dialog to smaller size.
1058 kes Invert Cancel OK buttons on restore to be OK Cancel.
1059 kes More strerror() to bstrerror() conversions.
1061 kes Start implementing bstrerror() in place of strerror().
1062 kes Stripping path -- seems to work.
1064 kes Prevent door and port files from being restored (mostly
1066 kes Free an unreleased buffer in compat code.
1067 kes Change console Job name from *Console* to -Console- to eliminate
1068 Win32 filename problems. Put Win32 path separator when creating
1069 Console file. This fixes bug #846.
1070 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1072 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1074 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1075 to force Win32 error message.
1077 kes First cut strip path. The data should be passed to the FD,
1078 but nothing is done with it yet.
1079 kes Enhance the digest and signature routines in the crypto
1080 library to accept a JCR and to use it to print error messages
1081 so that they will go in the Job report rather than the daemon's
1083 kes Simplify some of the verify signature code.
1084 kes Simplify a few of the alternative returns in the signature
1087 ebl Use only POSIX regex instead of GNU regex in breg.c for
1088 File relocation. It fix broken freebsd compilation.
1089 kes Convert all other Dir files to use new ua class message
1091 kes Tentative fix for missing digest signature in bug 807.
1092 kes Correct handle problem in new win32_ftruncate routine.
1093 kes Convert ua_purge.c and ua_update.c to use new ua class
1094 message routines for bat.
1096 kes Correct incorrect installation of LICENSE in Win32 installer.
1097 kes Display LICENSE at the beginning of the Win32 install.
1098 kes Attempt to correct the need for the png files to be installed
1100 kes Reapply my bat.conf install script in qt-console. I think I
1101 editted bat.pro instead of bat.pro.in and it was lost.
1102 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1103 the /var/lock/subsys for subsysdir. Also corrects typos in the
1106 kes First cut update job.
1107 kes Correct configure to include qmake of src/qt-console directory.
1109 kes Make restore job yes/mod/no print in one command so GUI works.
1110 kes First cut implementing backup and restore client.
1111 kes Correct editing in Verify output that caused a seg fault.
1113 kes Insure that bat.conf is not overwritten during installation.
1114 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1115 while I was implementing migration in March 2006 !
1117 ebl Cleanup file relocation, using char *RegexWhere instead of
1118 char *where + bool where_use_regexp
1119 kes Update some manpages and add bat manpage.
1120 kes Make a first cut at converting bacula.spec.in for bwx-console
1122 kes Apply patch from John Goerzen to add hostname as fourth argument
1123 to make_catalog_backup script.
1124 kes Fix typos I introduced into bsmtp.c
1125 kes Make pm_strxxx() routines handle input of NULL pointer. This
1126 is to protect from NULL pointers returned from SQL databases.
1127 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1128 kes Add more debug to FIFO code -- fix fifo regression test.
1130 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1131 kes Add thread timer to bnet_connect() to break from OS if wait time
1134 kes Update Win32 build to include new files, new symbols, and
1136 kes Implement socket level heartbeat (tcp_keepidle)
1137 ebl Commit File relocation patch
1138 kes Make bat have 'make install' target.
1139 kes Warn during install if old gnome-console binary found.
1140 kes Warn during install if old wx-console binary found.
1141 kes Add -8 option to bsmtp command line to add content type utf-8.
1142 Fixes bug #809. (Character coding problem in bsmtp).
1143 kes If < is found in target (from, to, cc) then do not enclose the
1144 target in < > in bsmtp. Fixes bug #772 (malformed address).
1145 kes When printing certain items in dbcheck, stop after 300000.
1146 Fixes bug #822. (dbcheck loops).
1147 kes Incorrect status in Dir after waiting for mount with poll set.
1150 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1152 kes Print waiting to reserve a device every 5 mins.
1154 kes Don't call close_part in label.c if tape and relabel.
1155 kes Don't free volume if busy in close() -- should help with
1157 ebl Fix #824 RunScript bug (After script could be execute twice)
1158 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1159 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1160 Add a regression script to test RunScript
1162 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1165 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1166 deprecated. No additional bugs will be fixed, and they will be dropped
1167 in a future release (probably 2.4.0).
1168 kes Change name of wx-console to bwx-console to make it more Bacula
1170 kes Change the name of gnome-console to bgnome-console to make it
1173 kes Some time in March, a Feature Request with patch from Jorj Bauer
1174 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1176 The ability for the director to validate a Client (FD) CN against
1177 an arbitrary set of patterns rather than the hostname, with
1178 A new 'TLS Allowed CN' set of directives which are implemented
1179 in the Client resource. Then pattern matching is used in place
1180 of hostname matching against the Certificate's CN. As an example, we
1181 have certificates which (a) use a local CA, and (b) have a CN of the
1183 kes Add new/changed entry points to Win32 build
1184 kes Create unaccepted-projects for projects that are not accepted.
1185 kes Simplify locking in the reservations system.
1186 kes Add more debug code in reservations.
1187 kes Make sure error condition on reserving a volume is handled correctly.
1188 kes Correct handling of volume_in_use.
1189 kes Correct handling of initializing a device.
1190 kes Move handling of broadcasting releasing a device into release_device().
1191 kes Correct attaching dcr to dev so that it is only done if device
1192 is properly initiated.
1194 kes Locking debug level tweaks in SD.
1195 kes Tweak new Volume code.
1197 kes Add exec external-command [wait-seconds] to bconsole. This
1198 executes the external-command. Note! normally external-command
1199 should be enclosed in double quotes.
1200 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1201 it should normally be off in a production system.
1203 kes Implement die command for SD so that we can force it to dump.
1204 kes Implement SD lock debug code.
1205 kes Implement new algorithm for keeping Volume list in SD. It
1206 is now owned by the device.
1208 kes Implement new code for freeing in use volumes that should
1209 resolve if not all, some of the problems of multiple drive
1210 tape conflicts described in bug 801.
1212 kes Fix gui/bacula-web/images files in svn.
1213 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1215 ebl Fix a bug in batch mode (in string escape)
1216 kes Correct migration prune SQL typo that crept in in a
1217 recent 2.1.x change.
1219 kes Move bnet_despool() into class in bsock.c
1220 kes Modify job report to include director name and Build OS.
1221 kes Move drop root privilege and check_catalog() before fork.
1222 kes Add update database scripts (version 9 to 10) to updatedb directory.
1224 ebl Check size and age of each file after its backup to see if
1225 it has changed during backup, if 'checkfilechanges' is set.
1226 The FD will do an extra check (stat(2)) after
1227 each file backup. mtime, ctime and size are compared with
1228 'before backup' information. If time or size mismatch, an
1229 error message will be generated. You must upgrade FD to use it.
1231 kes Make database name and user configurable
1232 --with-db-name=xxx --with-db-user=xxx
1233 kes Add back database type to message.c for debugging.
1235 kes Implement dir_sql() which issues an SQL query.
1236 kes Modify bat medialist to use dir_sql() and do some minor C++
1237 formatting as well as eliminating a number of pointers, simplifing
1240 kes Fix some of the mtx-changer grep commands for tape label readers.
1241 kes Convert a number of bsendmsg into the appropriate send/warning/error
1242 message class calls.
1243 kes Suppress the using database message in the .sql command.
1244 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1246 kes Add context menu for floating a window.
1247 kes Some minor cleanup and name changes in qt-console
1248 kes Add doing mt setblk 0 in Win32 mtx-changer.
1249 kes Apply Martin's bug fix to move definition of ENODATA for
1251 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1252 sqlite2 and sqlite3.
1254 kes More pruning cleanup.
1255 kes Turn on wait_for_drive by default in mtx-changer.
1256 kes Turn on Batch insert code by default as it now passes regression.
1257 kes Add ./configure --enable-bat to enable building of Bat.
1258 No install yet though.
1260 kes Implement a new .sql command for bat.
1261 kes Implement code to turn off pruning in obtaining the next volume.
1262 Pruning is turned off for the status dir command, but turned on
1263 for SD requests and for the list nextvolume command.
1265 kes Correct Qmsg() that was not updated correctly when committing a
1266 previous change (probably the recent TLS patch).
1268 kes Write new subroutine is_volume_purged() that explicitly checks
1269 if the Volume is purged, and if so marks it as such. This should
1270 resolve problems reported about needing to mount twice to recycle
1272 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1273 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1274 amount of duplicated code.
1275 kes Do volume pruning only for the Media Type desired (reduces pruning time
1276 if multiple Media Types are in the same pool).
1277 kes Implement more detailed info in the Job report for the Bacula version
1279 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1281 ebl Add bbatch tool to bench database and insert mode.
1282 Fix sql quote stuff in batch mode
1283 Fix sql stuff for mysql
1285 kes Correct problems with am/pm scheduling. Fixes bug #808.
1286 kes Implement new prunning code that prunes up to 1000 jobs at
1287 the same time. The same technique can be applied to a number
1288 of other prune/purge subroutines.
1289 kes Add an insanity check when starting a new tape job to ensure
1290 that the tape position has not been changed. If so fail the
1292 kes Fix Win32 build for dlls to add the folllowing:
1293 src/lib/bsock.c -- new file with new entry points
1294 src/lib/dlist.c -- new entry points
1295 src/cats/sql_create.c -- new entry point
1296 src/cats/sql_cmds.c -- new DATA item exported
1298 ebl batch mode cleanup bscan-test is ok now.
1299 kes Implement SD code to check length of disk volume before appending.
1301 kes Correct return status on db_batch... routines.
1302 kes Add call to db_write_batch_file_records() to migration code.
1303 ebl Fix AfterJob timing
1304 kes Move the checking of the database in initializion of the Director
1305 to after we drop privileges. This avoids the need for both root
1306 and bacula access to the DB.
1307 kes Correct a misplaced variable definition in src/filed/backup.c
1308 kes Correct how the new batch insert db_create_attributes_record()
1309 uses the arguments. Caused a seg fault in bscan.
1310 kes Implement lock() and unlock() methods in DEVICE class.
1311 Implement block() and set_block(xx) methods in DEVICE class.
1312 kes Modify bnet_connect() so that it uses time() to check for the
1313 wait time expiring (on some OSes, some system calls may not
1314 return immediately).
1315 kes Modify Verify to obtain the previous JobId when it is actually
1316 running rather than at schedule time (as it was in 1.38.x).
1317 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1319 kes When checking pid in pid file, continue running if the pid is
1320 the same as ours. This occurs on IRIX after a system crash.
1323 kes Extend new GUI API.
1324 kes Make the ua structure a class, and implement send_msg(),
1325 error_msg(), warning_msg(), and info_msg().
1327 kes Apply fix from for building wx-console on the Mac from
1329 kes Implement new select mechanism for GUI programs.
1330 kes Reorganize initialization of stackedWidgets in bat.
1332 kes Add updated nagios plugin supplied by Christian Masopust.
1334 kes More bat implementation.
1335 kes File migrate bug with Pool Occupancy using mediaid instead
1336 of jobids. Fixes bug #795.
1337 kes Fix orphaned buffers in filed backup and verify due to
1338 crypto buffers not freed during errors. Fixes bug #789.
1339 kes Extend new GUI api code to tree commands.
1340 kes Ensure that tree and dot commands check console ACLs.
1341 kes Permit marking directory with trailing slash.
1342 kes Allow 20 console connections (instead of only 10).
1344 kes Add smartctl call to bacula-sd.conf as an example of getting
1347 kes Modify jobq.c to let simultaneous restore jobs run. This may
1348 cause them to fail if they cannot get a drive.
1349 kes Add Client Connect Wait to Storage daemon to permit users to
1350 modify the time the SD waits for a FD connection.
1352 kes Correct virtual changer check which was backwards. This caused
1353 volumes to be unloaded into slots already occupied.
1355 kes Apply Command ACL filter to JobId list in restore command.
1356 kes Correct typeo in var.c patch.
1358 kes Don't let Bacula prune File or Job records for the current Job.
1359 kes Fix variable substitution pad + inc bug reported (with patch)
1362 kes Correct SQLite log table index as reported by Luca Berra.
1364 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1366 kes Begin implementing new comm signals for API.
1367 kes Fix a few places in lib/message.c where the open fd may
1369 kes Continue implementing lib/bsock.c (real class). Make jcr,
1370 who, host, and port private. There are new methods to access
1371 them for non-class use. This required touching a number of files.
1373 kes Add LANG=C to autoconf/randpass so it works with languages other
1374 than English. Fixes bug #788.
1376 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1378 You will not be able to generate Include/Exclude list any more.
1379 It will be fixed soon.
1380 If you want to use this, you can apply
1381 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1383 kes Restore of sockets created false error messages because Bacula
1384 no longer restores sockets, but the code was still trying to
1385 set the attributes on a non-existent file. Reported by a user.
1386 ebl finish RecyclePool feature
1387 Media will takes Pool.RecyclePool
1388 when moving from Scratch to a Pool or when user will do
1389 update volume=xxx frompool
1390 To use it, add RecyclePool = aPool to your Pool resource
1393 RecyclePool = Scratch
1397 kes Expand new BSOCK class adding signal() and new BNET signals.
1398 kes Begin enhancing the dot commands adding a new API function
1399 that returns more information and will make it easier
1400 to interface to the Director from a program.
1402 kes Make DEVICE fd private. Its new name is m_fd, and can be
1403 obtained with dev->fd() outside the class. This is the
1404 first of many DEVICE members to be made private.
1405 kes Implement Michael Renner's idea on having a virtual disk
1406 changer. I made some minor modifications (e.g. I did not
1407 implement the Virtual Changer directive, but simply set
1408 the Changer Command to an empty string.
1410 kes Implement a BSOCK send() method that writes the whole record
1411 in a single write() request rather than in two.
1412 ebl add update volume=xxx recyclepool=yyyy
1413 volume takes recyclepool from pool when using update volume=xxx from pool
1415 kes Fix encryption deblocking bug, which caused some restored files
1416 to be truncated. This fixes bug #763.
1417 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1418 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1420 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1421 ebl Use btime_t instead of uint64_t in media patch.
1423 kes Optimize the use of the database a bit in the Status dir command.
1424 Only open it when needed, ensure that if any previous database
1425 was opened, it is closed.
1427 kes Correct VolCatBytes bug from media patch.
1428 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1429 in the case of orphaned records.
1430 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1431 and File records in 300K chunks to be more efficient. This
1432 idea came from Juan Luis Frances (if I remember right).
1433 kes Apply Eric's scratch patch that moves a purged Volume to
1434 the RecyclePool. Question: how is RecyclePool set? what
1435 happens to the ScratchPool?
1436 kes Apply Eric's media patch that collects read/write media
1437 times as well as byte counts. This patch requires a
1438 simultaneous upgrade of the DIR and SD. Note, there
1439 should be some way to turn off timing. I'm not sure
1440 times are in Bacula units.
1441 kes Apply Eric's batch-insert patch.
1443 kes Update projects list.
1445 kes Implement Include/Exclude file lists in FD as dlists using
1446 the new dlistString class. This permits efficiently having
1447 large include/exclude lists and completes project Item 25.
1448 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1449 console is authorized to cancel the job. This fixes bug
1451 kes Modify SD so that the VolCatJobs medium record is updated
1452 at the beginning of a Job rather than the end. This
1453 fixes bug #775 where exceeding MaxVolJobs caused jobs
1455 kes Added a mutex around getting and setting Volume information
1456 so that multiple simultaneous jobs will single thread.
1458 Switch to using Subversion
1459 kes Remove src/pygtk-console/ from configure
1461 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1462 plus the entrypoints.
1463 kes Apply patch supplied that corrects debug print
1464 in canceling jobs for max run time. Supplied as
1465 part of bug #621, which was previously fixed.
1467 kes Test on job_canceled() and sd_msg_thread_done inside
1468 loop starting the message thread to avoid a race condition.
1470 kes Remove rl_catch_signal from console.c as it conflicted
1471 with the header definition. Fixes bug #765.
1472 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1474 kes Clarify some stored/acquire messages to indicate if the
1475 problem is with read or append.
1477 kes Fix memory leak with storage ids in cats/sql_get.c
1478 kes Terminate watchdog earlier to avoid reference to released
1479 memory -- reported by Jason Austin.
1480 kes Move closing the database from jobq.c to the director daemon
1481 termination routine. This fixes memory leaks for shadow jobs
1482 (i.e. migration jobs).
1483 kes Free up the unique jobid chain items in migrate.c. This fixes
1484 a memory leak problem.
1485 kes Convert some ugly looking for statements to use foreach_alist
1486 in findlib/find.c. This will facilitate converting the structures
1487 to use dlist (for large include/exclude lists).
1488 kes Fix a bug in the btree.c and btree.h routines, then rename them
1489 rblist and add them to be built in src/lib. Include some new
1490 methods written by Rudolf Cejka that make the code more readable
1491 (hides some of the ugly casting).
1492 kes Add set_next() and set_prev() methods which make the code much more
1493 readable. Also add a new dlistString class that facilitates storing
1494 strings in dlists. To be used in the large include/exclude lists.
1495 kes Make some trivial modifications to lib/tree.h that use rblist
1496 rather than dlist for storing the tree links. This was suggested
1497 by Rudolf Cejka. The result of this is that the restore tree now
1498 uses red-black binary trees rather than simple linked lists. This
1499 should give rather dramatic speed improvements for directories
1500 contining large numbers of directories/files (more than 10000).
1502 kes Fix maxruntime bug #621.
1504 ebl Implement the include JobID in spool file name project.
1505 kes Reorder projects file in order determined by Jan 2007 vote.
1506 kes Implement item #12 on project list -- quick release of FD by
1508 kes Fix open of SQLite3 db where user does not have write permission
1509 so that DIR does not crash. Fixes bug #761.
1511 kes Add back missing @ in Win32 Makefile.
1512 kes Change 'Device not configured to autolabel' from INFO
1514 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1515 which should restart an indefinite # of times.
1516 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1517 other DIR specifications.
1519 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1520 Fix path quoting in SQLite scripts.
1521 Fix problems with SHGetFolderPath.
1523 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1525 kes Fix Job restart on error bug that promotes an Inc to a Full
1526 backup. This should fix bug #755.
1527 kes Add qt-console and first cut of code.
1531 kes Fix Bacula->Documentation link on Win32 to point to index.html
1532 instead of bacula.html. Fixed bug #750.
1533 kes Return JobId in db_get_job_record() when JobId==0. This should
1535 kes Do not release source pointers when restarting a failed job.
1537 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1538 This *should* fix bug #747.
1539 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1542 kes Modify USTORE constructor to set an empty store_source string,
1543 and don't copy the store_source string in a cancel. Hopefully
1544 this will fix Arno's seg fault, bug #744.
1545 kes Add back code to disable conio in configure. Fixes bug #743.
1546 kes Correct the Options scanner in the FD to correctly handle
1547 SHA1 option, which was eating the next option. Reported by
1549 kes Add code to indicate when the SD is spooling, spool wait, and
1550 despooling as requested by Alan Brown.
1552 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob