1 Technical notes on version 2.3
5 kes Allow starting 59 jobs a second.
6 kes Make SD session key more random.
7 kes Add retry for SQLite opening db if it fails.
8 kes Suppress extra error messages during batch insert failure.
9 kes Add jcr to timer packets so if killed message can be sent to job.
10 kes Add JobId to all Dmsg() output.
11 kes Put some FD auth code on dbglvl rather than fixed.
12 kes Return insert attributes error message in db msg buffer to avoid
14 kes Separate batch init error messages.
15 kes Make SD code that contructs attribute insert check string lengths
17 kes If Dir gets an error during inserting attributes, cancel SD.
18 This reduces unnecessary error messages.
20 kes Correct search boolean for getting Volume info
21 ebl Cleanup batch code.
22 kes Back out one small change to the reservation system (reserving a volume).
23 kes Rework how a Volume is mounted. It is now much more intelligent and
24 will always attempt to use any mounted volume if possible and reduces
25 calls to the Director asking about volumes.
27 kes Turn off some code when batch insert not enabled.
28 kes Edit FD name in connect error messages.
29 kes Rework the reservation system to take into account that the Director
30 might give us a Volume that is different from the current one being
31 used, and to ensure that we don't exceed Maximum Volume Jobs.
32 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
33 fatal error with multiple jobs running'
34 kes Add more debug code in reservation system.
35 kes Implement maxvol-test to check bug #947.
37 kes Add code to handle tray monitor separated from Win32 FD.
38 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
40 kes Add missed return in fixing verify bug -- trunk only.
41 ebl Fix a command parser issue causing a director segfault.
42 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
44 kes Increase the max block size to 4MB fixes bug #957.
45 kes ERABT if user sets min block size > max block size. Fixes bug #956.
46 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
47 is not properly mounted (recognized) during a poll.
48 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
49 Job that has differences reports Verify OK.
50 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
52 ebl Add an option to operate on all pools with update vol parameters.
53 This complete the project 20. Patch from Nigel Stepp.
54 ebl Add history support to bconsole when using readline.
55 Using Ctrl-D to exit doesn't update .bconsole_history
56 kes Modify new volume algorithm to use max MediaId for generating next
57 volume number rather than the count of Volumes. This should essentially
58 eliminate the failure rate if some volumes were deleted. Bug #921.
59 kes Begin implemention of Optimize Job Scheduling.
60 kes Implement restore callback that Dirk and I agreed on for bat
61 restore. This fixes bug #928. Restore of backup of zero files fails.
62 kes Fix SQL Catalog logging which broke with new db_escape_string
65 kes Fix bacula_cats.def for new db_escape_string().
66 kes Increase size of name string when FD making connection to SD.
67 May fix bug #953. FD->SD connection failure.
69 kes Add code to help Dan debug 2drive-incremental-2disk test.
70 kes Add code to try to fix bug #908.
71 kes Add waits to multiple exit detection code to try to force pid
72 file to always be deleted.
73 kes Restore good dev.tar.gz to rescue set appropriate binary property.
75 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
76 trying to switch drives by checking for blocking before unblocking.
78 kes Cancel storage daemon in all cases where FD reports error. This
79 should fix virtually all cases of bug #920.
80 kes Fix db_escape_string() for MySQL which did not compile.
82 kes Fix error message that was clobbered when Dir tells SD it does not
83 have write permission on Volume. This should fix a minor point
84 in bug #942, but not the main problem.
85 kes Add code to cancel job in SD if FD connection fails. This should
87 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
88 dvl Pass jcr and db into db_escape_string() to enable better escaping
90 kes Fix migration code to get correct Volume name with multiple volumes
91 by skipping |. Fixes bug #936.
92 kes Implement patch supplied by Landon to fix bug #944 where using
93 TLS with bconsole uses 99+% of the CPU.
94 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
96 kes Move patches into patches directory.
98 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
101 ebl Using "m" in bconsole will show messages like before,
102 and not memory usage.
103 kes Fix bug #935, and probably also bug #903 where files were not
104 restored. MediaId was not properly set in JobMedia record after
107 kes Suppress chown and chmod error messages if the FD is not running
110 kes Apply Martin Simmons' patch that should turn off the new API usage
111 when batch insert is turned off allowing building on older
113 kes Add ./configure search in qwt-qt4 for qwt package
115 kes Bacula is now free of 3rd party GPL copyrighted code!
117 kes Add guid_to_name.c/h which replace idcache.
118 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
120 ebl Detect if new PosgreSQL batch insert API is present.
121 kes Correct incorrect mempool call causing Director crash. Occurs on
122 systems without va_copy().
123 sb Update spec files for 2.2.1 release
125 kes Fix memory pool call in ua_output.c. bug #934.
126 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
127 Add test program to fnmatch.c
129 kes Integrate patch to README.vc8 from
130 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
131 edit it to get it into Unix patch format.
132 kes Implement mkpath.c to replace old FSF makepath.c
134 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
136 Release Version 2.2.1
138 kes Update POTFILES.in
139 kes Cleanup a few underquoted AC_DEFUNs in configure
140 kes Apply patch from Martin Simmons that adds a test for va_copy to
143 kes Fix bug #921 by increasing the number of tries to create a new volume
145 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
146 can be called multiple times. Implement a version for machines
147 without va_copy() that gets a big buffer.
149 kes Integrate more portable zone offset code into bsmtp.c
150 Submitted by Attila Fülöp.
152 kes Fix bad SD->FD return status reported by
153 (James Harper) <james.harper@bendigoit.com.au>
154 ebl Fix a bug in read_close_session which return random status
155 thanks to James Harper
157 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
158 and directory names during restore of single file/directories.
159 kes Add sanity checks to .sql command when string is empty. Hopefully
160 that will resolve Dirks Director crash.
162 kes Apply patch submitted by Martin Simmons that corrects a seg fault
163 in the bsmtp chat subroutine when debug is >= 10.
165 kes Fix Director crash when running bat SQL queries.
166 kes Add David's notes on Item 8: Copy pools.
168 kes Rework projects file to be current and ready for a vote.
169 kes Enhance lex scanner error message.
171 kes Tweak LICENSE file to mention BSD code.
172 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
173 if specified on the ./configure.
174 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
175 This class is intended to allow us to open a second bsock to the
176 Director while in the restore subdialog.
178 kes Fix configure to create bat Makefile before creating dependencies.
179 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
180 kes Add a tooltip to the tray monitor.
181 dvl Set the Director's PID file before dropping privs. This fixes
184 kes Update AUTHORs file
185 kes Increase the default max concurrent jobs to 20 in FD and SD to
186 correspond with the default .conf files.
187 kes Rewrite the Win32 service routines. This eliminates the 3 copies
188 some different, of the same file created by RN when porting the
190 kes Rearrange some of the Win32 directories and the placement of the files
192 kes Set DEVELOPER flag in version.h
194 ========================================================================
195 Release Version 2.2.0
197 kes Apply a second doc patch from Marc.
198 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
199 improves the tips section that discusses how to setup multiple
202 kes Update bat README file.
203 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
204 corrects a typo in the Recycle status check in db_find_next_volume().
205 This will probably fix a number of annoying problems with multiple
207 kes Modify most of dird/msgchan.c to use bsock class calls rather than
208 bnet calls -- no functionality change.
210 kes Modify the Verify output to specify if files are missing on
211 the Volume(s) or disk. Fixes confusion in bug #916.
212 kes When more than one Volume is read in a migration job, the last
213 Volume bytes reported are from the last read volume rather than
214 the last written volume. Fixed. This fixes bug #910.
215 kes Fix display of Recycle flag after update volume=foo recycle=yes.
216 It previously printed New Recyle flag is: no. This fixes bug
219 kes Correct seg fault when switching tape drives during restore.
220 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
221 be used until after 2.2.0 release.
223 kes Remove fnmatch() in SD that permitted wild card specifications.
226 kes Fix %g in filename returned by SQL for browse tree reported by
228 kes Fix configure so that it puts config.out in the cwd rather than
230 kes Attempt to fix the locking problem reported by Eric in bug #906.
231 kes Make berrno class to leave errno unchanged after constructor call.
232 kes Make bnet_server use the heap rather than the stack to allocate
233 its socket fd pointers to avoid a crash at termination. Problem
234 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
236 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
237 and putting it in depkgs-qt along with Qt4.3.
239 kes Rework code in acquire.c that switches drives for reading when
240 the Media Type does not match. This should fix bug #906
242 ebl Fix a director segfault during job setup #907
243 kes Correct seg fault in postgresql when first operation returns no
244 rows. Fixes Dirks File browser problem seg fault with bat.
246 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
247 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
250 kes Implement PopUp YES/NO dialog for bat.
252 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
254 kes Correct RunScript to terminate job in FD on failure.
255 kes Change abort_on_error and AbortJobOnError to fail_on_error
256 and FailJobOnError in RunScripts.
257 kes Minor tweaks of code formating in RunScripts, principally to
258 avoid depassing 80 columns.
260 kes Eliminate one #ifdef Win32 in bsmtp
261 kes Implement grow tool to grow a file for testing very large databases.
262 kes Add big-vol-test to test Bacula seeking with > 5GB.
265 kes Modify find_next_volume() to return all values in Media record.
266 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
270 kes Update Release notes
272 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
273 Warning, in previous beta version, all media get from scratch keep their
276 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
277 This should fix bug #842. Made a note to look at removing the temp
278 files at the end of the install.
279 kes Add ability to mount and unmount a file device providing it is
280 marked as being removable and has the appropriate mount and unmount
281 commands defined in the Device resource. This fixes bug #830.
282 kes When applying a storage override, release all previous storage
283 definitions rather than just prepending the new storage.
284 This should prevent a good deal of confusion.
286 kes Implement ./configure search for qwt libraries.
288 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
289 Win32 FD. This should fix bug #893.
290 kes Remove an unnecessary beep in Win32 init code.
291 kes Update copyright dates in Win32 executable about boxes.
292 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
293 code with a BSD getopt.c and getopt.h.
294 kes Remove sched.h from the Win32 compat directory -- not used.
295 kes Remove the Exit menu item from the Win32 tray monitor. If you really
296 need to shut it down, do it through the services panel or the command
298 kes Remove some inappropriate Bacula FSFE copyrights.
299 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
300 kes Fix regress config non-portable test as pointed out by
301 Florian Heigl <florian.heigl@gmail.com>
302 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
303 as pointed out by Florian Heigl <florian.heigl@gmail.com>
305 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
306 Reported by Frank Sweetser.
310 kes Fix client-only build.
311 kes Integrate client-only fixes for bsys (initgroups) and conio from
312 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
313 kes Make arguments to get_scratch_volume() in same order as other
315 kes Rework the prune_volumes() subroutine so that after purging and
316 no volume found in desired pool, it will check for a scratch
317 volume. This prevents recycling the whole scratch pool.
318 kes Add code to status storage to print boffset_t (largefile support).
320 kes Move qwt (Graphics libarary for Qt4) to depkgs.
321 kes You now need a --with-qwt=<dir> to be able to build bat.
322 kes Update src/win32/cats/bacula_cats.def to include the new
323 db_get_query_dbids() call on Win32.
325 kes Correct a problem when selecting a scratch volume and moving
326 it to another pool that lost some columns.
327 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
328 kes Enhance Autochanger error messages to include Volume and device name.
329 kes Rework prune_volumes() code to take account of InChanger flag,
330 and to handle recycling volumes going to the Scratch pool and
331 current pool because the RecyclePool directive.
332 kes Implement a better and more efficient db_get_query_dbids() to
333 handle creating and passing back a list of DBIds.
337 kes Start work on new more efficient DBId subroutine. First use
338 will be for recycling volume to Scratch inchanger.
339 kes Increase number of JobIds in pruning from 1000 to 10000.
340 This to be replaced by above routine.
341 kes Begin implementation of building Qt4 on Win32.
342 kes Correct typo in fix I added for bad TLS shutdown.
343 kes Pull 2.0.3 patches into patches directory.
344 kes Update Release notes. Include qt-console in line count.
345 kes Update Projects file.
347 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
348 bug in migration code where a job that spanned two volumes
351 kes Implement new BST_DESPOOLING blocked state. Change from locking
352 during despooling in SD to blocking. This means that other threads
353 can work with the device structure, in particular the reservations
354 system while despooling.
356 kes Fix return in reservation message queue that missed clearing
357 the jcr lock (implemented 26Jun07 below).
358 kes Rename a number of dev methods to make locking function names
360 kes Document locking in lock.c. Move lock structures to new file
363 kes Move reservations message lock to lock jcr only this
365 kes Move main SD locking code into lock.c (new file).
366 kes Update Win32 build to include lock.c
370 kes Dirk committed the qwt library code for drawing graphs in bat.
371 kes Tweak install of qwt so that it is integrated with ./configure.
373 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
374 out by Eric (my typo).
375 ebl Fix configure.in to get batch mode enable
376 kes Return correct string from authenticate.cpp in bat when connecting
378 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
379 spurious line drops when using TLS.
380 kes Do not file reparse points when restoring a file that already
383 kes Implement Windows reparse points -- similar to directories, but
384 we do not descend into it. This is a first cut. They seem to
385 be backed up, but restore is not yet tested.
386 kes Remove restore_blocking in tls code when shutting a socket to leave
387 it in blocking mode. Hopefully this will fix the encryption bug
388 reported by Frank Sweetser.
389 kes When opening a file for backup, tell the OS that we are going to
390 read it sequentially -- optimization.
391 kes Change variable names in authenticate_director() to not conflict
392 with member names in bat. Caused great confusion with compiler,
395 kes Queue openssl error messages in case of comm problem.
396 kes Do shutdown() call if socket terminated.
397 kes Remove some duplicated code in tls.c
398 kes Move more of the bsock member variables into private and access
400 kes Add Frank Sweetser's tls-test to the regression suite.
402 kes Add Swedish sv.po file
404 kes Don't print clock skew message in FD if less than 3 seconds diff.
405 kes Add a bit of VSS info to status client.
406 kes Implement a first cut of Vista VSS, using Win2003 code.
410 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
411 loaded tape but uses first drive).
412 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
413 This was indeed a Win32 issue.
415 kes Simplify search of autochanger for in-use Volume.
416 kes Fix exit condition of check for in-use volume. kes Remove
417 inappropriate my_postgresql_free_result() in db_close()
419 kes Fix bad return in FD when encryption signature not found.
420 Probably caused a crash.
421 kes Inhibit missing encryption signature error messages for
422 file types where no signature computed.
423 kes Correct inverted check on autochanger in reservation system.
424 kes Tweak debug code in autochanger reservation.
426 kes Add some additional locking in the cats directory in subroutines
427 that modify packet variables called from batch insert.
428 kes Rework how dcrs are allocated. new_dcr() can now be called
429 with an existing pointer, and it will simply clean it up.
430 This allows the reservation system to test various different
431 devices, and will permit easy device changes.
432 kes A bunch of changes all over to handle new new_dcr() calling
434 kes Work more on the Volume management in the SD. Remember Volumes
435 for tape drives and for autochangers (even virtual disk changers).
436 kes When looking at the Volume list to reserve a drive, handle
437 autochanger names correctly by interating through the changer
438 devices. Also call the Director to see if a Volume is suitable
440 kes Fix some bugs in bscan. Make sure all media records are written.
441 Make sure that valid JobMedia records are written for disk files.
442 Previously they were completely wrong.
443 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
444 that the URLs don't change and so that the developers will all
445 work off the same copy. Rebuild from scrach.
446 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
450 kes Fix seg fault in FD from incorrect digest size.
451 kes Fix argument to non-OpenSSL crypto.c subroutine.
455 kes Remove a few malloc()s from the encryption code.
456 kes Use the class calls to bsock in filed/backup.c and restore.c in
457 place of the old bnet_xxx code.
458 kes Implement code that does an on the fly calculation of the
459 signing digest during restore of encrypted files. It makes
460 a best guess at the algorithm, and if it is not correct, will
461 then revert to the old code which reads the file after it is
463 kes Implement at least one missing crypto stream in stream_to_ascii()
464 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
465 #877 where a reload with bad syntax causes Dir to exit.
467 Cut: 2.1.14 beta (not released)
469 kes Do not free a volume on a tape drive until another volume is
470 mounted and read, or the autochanger unloads the volume.
471 This should help the SD re-use volumes that are already mounted,
472 and should fix bug #886.
473 kes Apply patch from user brettedgar that allows gnome2-console include
474 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
475 kes Apply patch from Lucien Weller that fixes day of week calculation
476 because of DST flag problem. Fixes bug #887.
478 kes Move find_next_appendable_volume() to after acquiring a valid device
479 in reserve.c. This fixes bug #864 -- confirmed by reporter.
481 kes Unable to reproduce bug 872. However added additional testing for
483 kes Bug #874 resolved by documenting SQLite limitations.
484 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
485 kes Bug #881 resolved by removing typo in mtx-changer script.
486 kes Made Frank Sweetser's wiki the official Bacula wiki with his
487 approval. Added a link to the wiki on the web page, and implemented
488 a backup from http://paramount.ind.wpi.edu
490 kes Fix update allfrompool to pass pool name.
492 kes Convert to pure GPL v2 license.
493 kes Fix sscanf problems reported by Peter Buschman that caused
494 a bus error on Solaris.
495 kes Rework (simplify) the select prompt in bat.
496 kes Move get_jobid_from_tid() into lib and create a
498 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
499 should definitely fix the problem of lost error messages in the
501 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
502 kes Eliminate tcpd.h from the project. Enclose the #include from the
503 library with extern C ...
504 kes Add print of signal name when a signal is trapped.
508 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
510 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
511 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
512 makes SQLit3 run 30 times faster, though a bit less safe.
513 kes Implement --with-batch-insert in configure and detection of thread
514 safe libraries. It is on by default, but turned off if no thread
515 safe library (e.g. SQLite 2) is available.
517 kes Fix Bacula PostgreSQL buffer overruns.
518 kes Do better checking for NULL results returned from PostgreSQL;
519 implement retry for failed queries; clear results buffer after
520 failed query. Hopefully this will correct the PostgreSQL failures.
522 kes Implement algorithm to handle only one appendable volume with
523 Prefer Mounted Volumes = no.
524 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
525 returned from a query.
526 kes Make volume lock recursive.
527 kes Implement an additional volume reservation algorithm that
528 starts by considering all reserved volumes then uses the
529 old brute force algorithm of searching the resources to
530 find a suitable device.
531 kes Add new reservations debug code and refine the old code.
532 kes Update the win32/dll/bacula.defs file.
534 kes Tweak reservations algorithm to permit a few more cases, i.e.
535 volume reserved, but on different drive, ...
536 kes Enhance SD status to include Pool and Media Type for drive in a
537 more readable format (a bit longer).
538 kes Fix PostgreSQL double free.
540 kes Minor refactoring of restore decryption code.
541 kes Add code to smartall.c to detect double free of a buffer.
543 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
544 so that bsmtp will create a correct email address (mailbox only).
545 kes Modify 'memory' command so that the buffers are listed as 'In use'
546 to avoid confusion with Orphaned buffers.
547 kes I reworked the OpenSSL include/lib flags to be handled in
548 the standard Bacula way, which should fix bug #863 concerning
549 non-standard OpenSSL libraries.
551 kes Implement Help Browser window for bat.
552 kes Fix reload bug that reset StorageId to zero.
554 kes Fix TLS #ifdefing when TLS turned off.
555 kes Ensure that when labelling a tape with Slot=0 that InChanger
557 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
559 kes Add StartTime to final uar_sel_jobid_temp query so that we can
560 add DISTINCT (required by PostgreSQL).
561 kes Implement BSOCK authenticate_director() method. Eventually will
562 authenicate all daemons.
563 kes Move several more functions into the BSOCK class.
565 kes Add code to tell the OS that we no longer need a cached
566 file that we were reading. In findlib/bfile.c. Also,
567 only cache files that we are reading. Thanks to
568 Tobias Oetiker <tobi@oetiker.ch> for the idea.
569 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
570 kes Implement script to automatically generate cats and dll .def
572 kes Update README.mingw32 to include new .def file generation.
573 kes Correct typo in UTF-8 error message as reported by:
574 jhernandez <julianhernandez@gmail.com>
575 kes Add additional sm_check() code on debug level 1.
576 kes Set default debug level to 1.
577 kes Trap SIGABRT in attempt to get traceback.
579 kes Reduce bat connect timeout from 30 to 15 seconds.
580 kes More restructuring and implementing BSOCK class in place of
582 kes Remove a few unnecessary malloc() tests in crypto code.
583 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
584 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
585 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
587 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
589 kes Fix Verify InitCatalog. The attributes were not pointing to the
590 correct saved location.
591 kes Implement message callback so that GUI is sure to get all
592 daemon messages. Currently displayed in a dialog in bat.
593 kes Ignore SIGUSR2 (Bacula timer) in bat.
594 kes Apply regress patch from bug #859 to allow regress to work
595 with Solaris compiler.
597 kes Begin adding TLS support to bat.
598 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
599 clean up lex.c and make it more readable.
601 kes Move more bnet functions into the BSOCK class.
602 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
603 kes Complete change of berrno strerror() method to bstrerror()
607 kes Cleanup incorrect email addresses in bsmtp.
608 kes Make bat display initial messages rather than discard them.
610 kes First cut of adding .mod to the run command.
611 kes Implement auto display of messages in bat.
612 kes Enhanced preferences to allow all Bacula output to be
615 kes Try to make bsmtp date routines more generic.
616 kes Fixed bug #856 autochanger documentation.
617 kes Rework bsmtp date editing for Win32. This fixes bug #854.
618 kes Add new cats entry point so Win32 builds.
620 kes Attempt to fix bsmtp date editing on OSes without %z editing.
622 kes Do better checking for the MySQL 64 bit libraries looking for both
623 .a and .so libraries.
624 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
625 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
626 kes Require the thread safe version of MySQL during configure. Thanks
627 to Andre Noll for pointing this out.
628 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
629 continuing in migration code.
630 kes Apply implementation of tray-monitor font derived from gnome-console
631 submitted by Andreas Piesk <a.piesk@gmx.net>
633 kes Eliminate important memory loss in SQLite
634 kes Fixed the batch insert MySQL thread specific data that was not
635 being freed. See cats/mysql.c:db_thread_cleanup().
636 kes Fix restore before command.
637 kes Convert old hdr.name to name() in a few places.
638 kes Implement update jobid command.
639 kes Return all time_t dates in db_get_job_record()
640 kes Stop watchdog in SD earlier.
641 kes Put Pool just after Storage in please mount message.
642 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
645 kes Update the po files.
646 kes Fix Verify InitCatalog by making it cache attributes.
648 kes Change name bacula-bat to bat for man 1 page to correspond to
650 kes Check for client and store NULL pointers in status command. This
652 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
653 kes Fix sign extended editing of %p.
654 kes Clean out a little old #ifdefing in cats/mysql.c
656 kes If time diff between DIR and FD is more than 600 seconds convert
657 INFO message to WARNING.
658 kes Implement heap size display in status for all daemons.
659 kes Attempt to fix MySQL db open memory loss (not successfull).
660 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
661 kes Eliminate memory loss in MySQL (possibly other SQLs) during
662 Query. This looks like a MySQL but but by doing extra releases,
663 the memory goes away. This should fix bug #847.
665 kes When backup fails, cancel SD before waiting for sd termination.
666 kes If SD is waiting for FD to connect during cancel, wake up the
668 kes Fix fsf code so that errno is correctly reported.
669 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
671 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
672 so that Bacula doesn't later stumble into a seg fault.
673 kes Use the term Restore Client in the restore Job report.
674 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
675 the original job's FileSetId.
676 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
677 spooling in migration jobs. Not yet tested.
678 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
679 reading conf file from a pipe. However, do it with open_bpipe()
680 rather than popen. Not yet tested.
682 kes Fix an ugly bug where the VolCatBytes were getting updated
684 kes Implement bconsole memory command that prints current memory
685 usage, plus smartalloc dump.
686 kes Clarify some error messages in backup, admin, and migrate.
687 kes Shrink label dialog to smaller size.
688 kes Invert Cancel OK buttons on restore to be OK Cancel.
689 kes More strerror() to bstrerror() conversions.
691 kes Start implementing bstrerror() in place of strerror().
692 kes Stripping path -- seems to work.
694 kes Prevent door and port files from being restored (mostly
696 kes Free an unreleased buffer in compat code.
697 kes Change console Job name from *Console* to -Console- to eliminate
698 Win32 filename problems. Put Win32 path separator when creating
699 Console file. This fixes bug #846.
700 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
702 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
704 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
705 to force Win32 error message.
707 kes First cut strip path. The data should be passed to the FD,
708 but nothing is done with it yet.
709 kes Enhance the digest and signature routines in the crypto
710 library to accept a JCR and to use it to print error messages
711 so that they will go in the Job report rather than the daemon's
713 kes Simplify some of the verify signature code.
714 kes Simplify a few of the alternative returns in the signature
717 ebl Use only POSIX regex instead of GNU regex in breg.c for
718 File relocation. It fix broken freebsd compilation.
719 kes Convert all other Dir files to use new ua class message
721 kes Tentative fix for missing digest signature in bug 807.
722 kes Correct handle problem in new win32_ftruncate routine.
723 kes Convert ua_purge.c and ua_update.c to use new ua class
724 message routines for bat.
726 kes Correct incorrect installation of LICENSE in Win32 installer.
727 kes Display LICENSE at the beginning of the Win32 install.
728 kes Attempt to correct the need for the png files to be installed
730 kes Reapply my bat.conf install script in qt-console. I think I
731 editted bat.pro instead of bat.pro.in and it was lost.
732 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
733 the /var/lock/subsys for subsysdir. Also corrects typos in the
736 kes First cut update job.
737 kes Correct configure to include qmake of src/qt-console directory.
739 kes Make restore job yes/mod/no print in one command so GUI works.
740 kes First cut implementing backup and restore client.
741 kes Correct editing in Verify output that caused a seg fault.
743 kes Insure that bat.conf is not overwritten during installation.
744 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
745 while I was implementing migration in March 2006 !
747 ebl Cleanup file relocation, using char *RegexWhere instead of
748 char *where + bool where_use_regexp
749 kes Update some manpages and add bat manpage.
750 kes Make a first cut at converting bacula.spec.in for bwx-console
752 kes Apply patch from John Goerzen to add hostname as fourth argument
753 to make_catalog_backup script.
754 kes Fix typos I introduced into bsmtp.c
755 kes Make pm_strxxx() routines handle input of NULL pointer. This
756 is to protect from NULL pointers returned from SQL databases.
757 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
758 kes Add more debug to FIFO code -- fix fifo regression test.
760 kes Implement posix_fadvise in FD, and for reading spool files in SD.
761 kes Add thread timer to bnet_connect() to break from OS if wait time
764 kes Update Win32 build to include new files, new symbols, and
766 kes Implement socket level heartbeat (tcp_keepidle)
767 ebl Commit File relocation patch
768 kes Make bat have 'make install' target.
769 kes Warn during install if old gnome-console binary found.
770 kes Warn during install if old wx-console binary found.
771 kes Add -8 option to bsmtp command line to add content type utf-8.
772 Fixes bug #809. (Character coding problem in bsmtp).
773 kes If < is found in target (from, to, cc) then do not enclose the
774 target in < > in bsmtp. Fixes bug #772 (malformed address).
775 kes When printing certain items in dbcheck, stop after 300000.
776 Fixes bug #822. (dbcheck loops).
777 kes Incorrect status in Dir after waiting for mount with poll set.
780 kes Extend idea of Prefer Mounted Volumes to mean a volume about
782 kes Print waiting to reserve a device every 5 mins.
784 kes Don't call close_part in label.c if tape and relabel.
785 kes Don't free volume if busy in close() -- should help with
787 ebl Fix #824 RunScript bug (After script could be execute twice)
788 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
789 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
790 Add a regression script to test RunScript
792 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
795 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
796 deprecated. No additional bugs will be fixed, and they will be dropped
797 in a future release (probably 2.4.0).
798 kes Change name of wx-console to bwx-console to make it more Bacula
800 kes Change the name of gnome-console to bgnome-console to make it
803 kes Some time in March, a Feature Request with patch from Jorj Bauer
804 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
806 The ability for the director to validate a Client (FD) CN against
807 an arbitrary set of patterns rather than the hostname, with
808 A new 'TLS Allowed CN' set of directives which are implemented
809 in the Client resource. Then pattern matching is used in place
810 of hostname matching against the Certificate's CN. As an example, we
811 have certificates which (a) use a local CA, and (b) have a CN of the
813 kes Add new/changed entry points to Win32 build
814 kes Create unaccepted-projects for projects that are not accepted.
815 kes Simplify locking in the reservations system.
816 kes Add more debug code in reservations.
817 kes Make sure error condition on reserving a volume is handled correctly.
818 kes Correct handling of volume_in_use.
819 kes Correct handling of initializing a device.
820 kes Move handling of broadcasting releasing a device into release_device().
821 kes Correct attaching dcr to dev so that it is only done if device
822 is properly initiated.
824 kes Locking debug level tweaks in SD.
825 kes Tweak new Volume code.
827 kes Add exec external-command [wait-seconds] to bconsole. This
828 executes the external-command. Note! normally external-command
829 should be enclosed in double quotes.
830 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
831 it should normally be off in a production system.
833 kes Implement die command for SD so that we can force it to dump.
834 kes Implement SD lock debug code.
835 kes Implement new algorithm for keeping Volume list in SD. It
836 is now owned by the device.
838 kes Implement new code for freeing in use volumes that should
839 resolve if not all, some of the problems of multiple drive
840 tape conflicts described in bug 801.
842 kes Fix gui/bacula-web/images files in svn.
843 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
845 ebl Fix a bug in batch mode (in string escape)
846 kes Correct migration prune SQL typo that crept in in a
849 kes Move bnet_despool() into class in bsock.c
850 kes Modify job report to include director name and Build OS.
851 kes Move drop root privilege and check_catalog() before fork.
852 kes Add update database scripts (version 9 to 10) to updatedb directory.
854 ebl Check size and age of each file after its backup to see if
855 it has changed during backup, if 'checkfilechanges' is set.
856 The FD will do an extra check (stat(2)) after
857 each file backup. mtime, ctime and size are compared with
858 'before backup' information. If time or size mismatch, an
859 error message will be generated. You must upgrade FD to use it.
861 kes Make database name and user configurable
862 --with-db-name=xxx --with-db-user=xxx
863 kes Add back database type to message.c for debugging.
865 kes Implement dir_sql() which issues an SQL query.
866 kes Modify bat medialist to use dir_sql() and do some minor C++
867 formatting as well as eliminating a number of pointers, simplifing
870 kes Fix some of the mtx-changer grep commands for tape label readers.
871 kes Convert a number of bsendmsg into the appropriate send/warning/error
873 kes Suppress the using database message in the .sql command.
874 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
876 kes Add context menu for floating a window.
877 kes Some minor cleanup and name changes in qt-console
878 kes Add doing mt setblk 0 in Win32 mtx-changer.
879 kes Apply Martin's bug fix to move definition of ENODATA for
881 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
884 kes More pruning cleanup.
885 kes Turn on wait_for_drive by default in mtx-changer.
886 kes Turn on Batch insert code by default as it now passes regression.
887 kes Add ./configure --enable-bat to enable building of Bat.
888 No install yet though.
890 kes Implement a new .sql command for bat.
891 kes Implement code to turn off pruning in obtaining the next volume.
892 Pruning is turned off for the status dir command, but turned on
893 for SD requests and for the list nextvolume command.
895 kes Correct Qmsg() that was not updated correctly when committing a
896 previous change (probably the recent TLS patch).
898 kes Write new subroutine is_volume_purged() that explicitly checks
899 if the Volume is purged, and if so marks it as such. This should
900 resolve problems reported about needing to mount twice to recycle
902 kes Rewrite pruning algorithm to do more work in the SQL engine, and
903 to pass a list of JobIds to be deleted to SQL. Also, minimize the
904 amount of duplicated code.
905 kes Do volume pruning only for the Media Type desired (reduces pruning time
906 if multiple Media Types are in the same pool).
907 kes Implement more detailed info in the Job report for the Bacula version
909 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
911 ebl Add bbatch tool to bench database and insert mode.
912 Fix sql quote stuff in batch mode
913 Fix sql stuff for mysql
915 kes Correct problems with am/pm scheduling. Fixes bug #808.
916 kes Implement new prunning code that prunes up to 1000 jobs at
917 the same time. The same technique can be applied to a number
918 of other prune/purge subroutines.
919 kes Add an insanity check when starting a new tape job to ensure
920 that the tape position has not been changed. If so fail the
922 kes Fix Win32 build for dlls to add the folllowing:
923 src/lib/bsock.c -- new file with new entry points
924 src/lib/dlist.c -- new entry points
925 src/cats/sql_create.c -- new entry point
926 src/cats/sql_cmds.c -- new DATA item exported
928 ebl batch mode cleanup bscan-test is ok now.
929 kes Implement SD code to check length of disk volume before appending.
931 kes Correct return status on db_batch... routines.
932 kes Add call to db_write_batch_file_records() to migration code.
933 ebl Fix AfterJob timing
934 kes Move the checking of the database in initializion of the Director
935 to after we drop privileges. This avoids the need for both root
936 and bacula access to the DB.
937 kes Correct a misplaced variable definition in src/filed/backup.c
938 kes Correct how the new batch insert db_create_attributes_record()
939 uses the arguments. Caused a seg fault in bscan.
940 kes Implement lock() and unlock() methods in DEVICE class.
941 Implement block() and set_block(xx) methods in DEVICE class.
942 kes Modify bnet_connect() so that it uses time() to check for the
943 wait time expiring (on some OSes, some system calls may not
945 kes Modify Verify to obtain the previous JobId when it is actually
946 running rather than at schedule time (as it was in 1.38.x).
947 kes Fix src/job.c to handle MaxWaitTime correctly. This should
949 kes When checking pid in pid file, continue running if the pid is
950 the same as ours. This occurs on IRIX after a system crash.
953 kes Extend new GUI API.
954 kes Make the ua structure a class, and implement send_msg(),
955 error_msg(), warning_msg(), and info_msg().
957 kes Apply fix from for building wx-console on the Mac from
959 kes Implement new select mechanism for GUI programs.
960 kes Reorganize initialization of stackedWidgets in bat.
962 kes Add updated nagios plugin supplied by Christian Masopust.
964 kes More bat implementation.
965 kes File migrate bug with Pool Occupancy using mediaid instead
966 of jobids. Fixes bug #795.
967 kes Fix orphaned buffers in filed backup and verify due to
968 crypto buffers not freed during errors. Fixes bug #789.
969 kes Extend new GUI api code to tree commands.
970 kes Ensure that tree and dot commands check console ACLs.
971 kes Permit marking directory with trailing slash.
972 kes Allow 20 console connections (instead of only 10).
974 kes Add smartctl call to bacula-sd.conf as an example of getting
977 kes Modify jobq.c to let simultaneous restore jobs run. This may
978 cause them to fail if they cannot get a drive.
979 kes Add Client Connect Wait to Storage daemon to permit users to
980 modify the time the SD waits for a FD connection.
982 kes Correct virtual changer check which was backwards. This caused
983 volumes to be unloaded into slots already occupied.
985 kes Apply Command ACL filter to JobId list in restore command.
986 kes Correct typeo in var.c patch.
988 kes Don't let Bacula prune File or Job records for the current Job.
989 kes Fix variable substitution pad + inc bug reported (with patch)
992 kes Correct SQLite log table index as reported by Luca Berra.
994 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
996 kes Begin implementing new comm signals for API.
997 kes Fix a few places in lib/message.c where the open fd may
999 kes Continue implementing lib/bsock.c (real class). Make jcr,
1000 who, host, and port private. There are new methods to access
1001 them for non-class use. This required touching a number of files.
1003 kes Add LANG=C to autoconf/randpass so it works with languages other
1004 than English. Fixes bug #788.
1006 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1008 You will not be able to generate Include/Exclude list any more.
1009 It will be fixed soon.
1010 If you want to use this, you can apply
1011 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1013 kes Restore of sockets created false error messages because Bacula
1014 no longer restores sockets, but the code was still trying to
1015 set the attributes on a non-existent file. Reported by a user.
1016 ebl finish RecyclePool feature
1017 Media will takes Pool.RecyclePool
1018 when moving from Scratch to a Pool or when user will do
1019 update volume=xxx frompool
1020 To use it, add RecyclePool = aPool to your Pool resource
1023 RecyclePool = Scratch
1027 kes Expand new BSOCK class adding signal() and new BNET signals.
1028 kes Begin enhancing the dot commands adding a new API function
1029 that returns more information and will make it easier
1030 to interface to the Director from a program.
1032 kes Make DEVICE fd private. Its new name is m_fd, and can be
1033 obtained with dev->fd() outside the class. This is the
1034 first of many DEVICE members to be made private.
1035 kes Implement Michael Renner's idea on having a virtual disk
1036 changer. I made some minor modifications (e.g. I did not
1037 implement the Virtual Changer directive, but simply set
1038 the Changer Command to an empty string.
1040 kes Implement a BSOCK send() method that writes the whole record
1041 in a single write() request rather than in two.
1042 ebl add update volume=xxx recyclepool=yyyy
1043 volume takes recyclepool from pool when using update volume=xxx from pool
1045 kes Fix encryption deblocking bug, which caused some restored files
1046 to be truncated. This fixes bug #763.
1047 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1048 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1050 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1051 ebl Use btime_t instead of uint64_t in media patch.
1053 kes Optimize the use of the database a bit in the Status dir command.
1054 Only open it when needed, ensure that if any previous database
1055 was opened, it is closed.
1057 kes Correct VolCatBytes bug from media patch.
1058 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1059 in the case of orphaned records.
1060 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1061 and File records in 300K chunks to be more efficient. This
1062 idea came from Juan Luis Frances (if I remember right).
1063 kes Apply Eric's scratch patch that moves a purged Volume to
1064 the RecyclePool. Question: how is RecyclePool set? what
1065 happens to the ScratchPool?
1066 kes Apply Eric's media patch that collects read/write media
1067 times as well as byte counts. This patch requires a
1068 simultaneous upgrade of the DIR and SD. Note, there
1069 should be some way to turn off timing. I'm not sure
1070 times are in Bacula units.
1071 kes Apply Eric's batch-insert patch.
1073 kes Update projects list.
1075 kes Implement Include/Exclude file lists in FD as dlists using
1076 the new dlistString class. This permits efficiently having
1077 large include/exclude lists and completes project Item 25.
1078 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1079 console is authorized to cancel the job. This fixes bug
1081 kes Modify SD so that the VolCatJobs medium record is updated
1082 at the beginning of a Job rather than the end. This
1083 fixes bug #775 where exceeding MaxVolJobs caused jobs
1085 kes Added a mutex around getting and setting Volume information
1086 so that multiple simultaneous jobs will single thread.
1088 Switch to using Subversion
1089 kes Remove src/pygtk-console/ from configure
1091 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1092 plus the entrypoints.
1093 kes Apply patch supplied that corrects debug print
1094 in canceling jobs for max run time. Supplied as
1095 part of bug #621, which was previously fixed.
1097 kes Test on job_canceled() and sd_msg_thread_done inside
1098 loop starting the message thread to avoid a race condition.
1100 kes Remove rl_catch_signal from console.c as it conflicted
1101 with the header definition. Fixes bug #765.
1102 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1104 kes Clarify some stored/acquire messages to indicate if the
1105 problem is with read or append.
1107 kes Fix memory leak with storage ids in cats/sql_get.c
1108 kes Terminate watchdog earlier to avoid reference to released
1109 memory -- reported by Jason Austin.
1110 kes Move closing the database from jobq.c to the director daemon
1111 termination routine. This fixes memory leaks for shadow jobs
1112 (i.e. migration jobs).
1113 kes Free up the unique jobid chain items in migrate.c. This fixes
1114 a memory leak problem.
1115 kes Convert some ugly looking for statements to use foreach_alist
1116 in findlib/find.c. This will facilitate converting the structures
1117 to use dlist (for large include/exclude lists).
1118 kes Fix a bug in the btree.c and btree.h routines, then rename them
1119 rblist and add them to be built in src/lib. Include some new
1120 methods written by Rudolf Cejka that make the code more readable
1121 (hides some of the ugly casting).
1122 kes Add set_next() and set_prev() methods which make the code much more
1123 readable. Also add a new dlistString class that facilitates storing
1124 strings in dlists. To be used in the large include/exclude lists.
1125 kes Make some trivial modifications to lib/tree.h that use rblist
1126 rather than dlist for storing the tree links. This was suggested
1127 by Rudolf Cejka. The result of this is that the restore tree now
1128 uses red-black binary trees rather than simple linked lists. This
1129 should give rather dramatic speed improvements for directories
1130 contining large numbers of directories/files (more than 10000).
1132 kes Fix maxruntime bug #621.
1134 ebl Implement the include JobID in spool file name project.
1135 kes Reorder projects file in order determined by Jan 2007 vote.
1136 kes Implement item #12 on project list -- quick release of FD by
1138 kes Fix open of SQLite3 db where user does not have write permission
1139 so that DIR does not crash. Fixes bug #761.
1141 kes Add back missing @ in Win32 Makefile.
1142 kes Change 'Device not configured to autolabel' from INFO
1144 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1145 which should restart an indefinite # of times.
1146 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1147 other DIR specifications.
1149 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1150 Fix path quoting in SQLite scripts.
1151 Fix problems with SHGetFolderPath.
1153 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1155 kes Fix Job restart on error bug that promotes an Inc to a Full
1156 backup. This should fix bug #755.
1157 kes Add qt-console and first cut of code.
1161 kes Fix Bacula->Documentation link on Win32 to point to index.html
1162 instead of bacula.html. Fixed bug #750.
1163 kes Return JobId in db_get_job_record() when JobId==0. This should
1165 kes Do not release source pointers when restarting a failed job.
1167 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1168 This *should* fix bug #747.
1169 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1172 kes Modify USTORE constructor to set an empty store_source string,
1173 and don't copy the store_source string in a cancel. Hopefully
1174 this will fix Arno's seg fault, bug #744.
1175 kes Add back code to disable conio in configure. Fixes bug #743.
1176 kes Correct the Options scanner in the FD to correctly handle
1177 SHA1 option, which was eating the next option. Reported by
1179 kes Add code to indicate when the SD is spooling, spool wait, and
1180 despooling as requested by Alan Brown.
1182 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob