1 Technical notes on version 2.3
5 ebl Fix #955 bug which was introduce with regexwhere relocation.
7 ebl Add an option to operate on all pools with update vol parameters.
8 This complete the project 20. Patch from Nigel Stepp.
9 ebl Add history support to bconsole when using readline.
10 Using Ctrl-D to exit doesn't update .bconsole_history
11 kes Modify new volume algorithm to use max MediaId for generating next
12 volume number rather than the count of Volumes. This should essentially
13 eliminate the failure rate if some volumes were deleted. Bug #921.
14 kes Begin implemention of Optimize Job Scheduling.
15 kes Implement restore callback that Dirk and I agreed on for bat
16 restore. This fixes bug #928. Restore of backup of zero files fails.
17 kes Fix SQL Catalog logging which broke with new db_escape_string
20 kes Fix bacula_cats.def for new db_escape_string().
21 kes Increase size of name string when FD making connection to SD.
22 May fix bug #953. FD->SD connection failure.
24 kes Add code to help Dan debug 2drive-incremental-2disk test.
25 kes Add code to try to fix bug #908.
26 kes Add waits to multiple exit detection code to try to force pid
27 file to always be deleted.
28 kes Restore good dev.tar.gz to rescue set appropriate binary property.
30 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
31 trying to switch drives by checking for blocking before unblocking.
33 kes Cancel storage daemon in all cases where FD reports error. This
34 should fix virtually all cases of bug #920.
35 kes Fix db_escape_string() for MySQL which did not compile.
37 kes Fix error message that was clobbered when Dir tells SD it does not
38 have write permission on Volume. This should fix a minor point
39 in bug #942, but not the main problem.
40 kes Add code to cancel job in SD if FD connection fails. This should
42 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
43 dvl Pass jcr and db into db_escape_string() to enable better escaping
45 kes Fix migration code to get correct Volume name with multiple volumes
46 by skipping |. Fixes bug #936.
47 kes Implement patch supplied by Landon to fix bug #944 where using
48 TLS with bconsole uses 99+% of the CPU.
49 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
51 kes Move patches into patches directory.
53 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
56 ebl Using "m" in bconsole will show messages like before,
58 kes Fix bug #935, and probably also bug #903 where files were not
59 restored. MediaId was not properly set in JobMedia record after
62 kes Suppress chown and chmod error messages if the FD is not running
65 kes Apply Martin Simmons' patch that should turn off the new API usage
66 when batch insert is turned off allowing building on older
68 kes Add ./configure search in qwt-qt4 for qwt package
70 kes Bacula is now free of 3rd party GPL copyrighted code!
72 kes Add guid_to_name.c/h which replace idcache.
73 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
75 ebl Detect if new PosgreSQL batch insert API is present.
76 kes Correct incorrect mempool call causing Director crash. Occurs on
77 systems without va_copy().
78 sb Update spec files for 2.2.1 release
80 kes Fix memory pool call in ua_output.c. bug #934.
81 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
82 Add test program to fnmatch.c
84 kes Integrate patch to README.vc8 from
85 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
86 edit it to get it into Unix patch format.
87 kes Implement mkpath.c to replace old FSF makepath.c
89 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
93 kes Update POTFILES.in
94 kes Cleanup a few underquoted AC_DEFUNs in configure
95 kes Apply patch from Martin Simmons that adds a test for va_copy to
98 kes Fix bug #921 by increasing the number of tries to create a new volume
100 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
101 can be called multiple times. Implement a version for machines
102 without va_copy() that gets a big buffer.
104 kes Integrate more portable zone offset code into bsmtp.c
105 Submitted by Attila Fülöp.
107 kes Fix bad SD->FD return status reported by
108 (James Harper) <james.harper@bendigoit.com.au>
109 ebl Fix a bug in read_close_session which return random status
110 thanks to James Harper
112 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
113 and directory names during restore of single file/directories.
114 kes Add sanity checks to .sql command when string is empty. Hopefully
115 that will resolve Dirks Director crash.
117 kes Apply patch submitted by Martin Simmons that corrects a seg fault
118 in the bsmtp chat subroutine when debug is >= 10.
120 kes Fix Director crash when running bat SQL queries.
121 kes Add David's notes on Item 8: Copy pools.
123 kes Rework projects file to be current and ready for a vote.
124 kes Enhance lex scanner error message.
126 kes Tweak LICENSE file to mention BSD code.
127 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
128 if specified on the ./configure.
129 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
130 This class is intended to allow us to open a second bsock to the
131 Director while in the restore subdialog.
133 kes Fix configure to create bat Makefile before creating dependencies.
134 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
135 kes Add a tooltip to the tray monitor.
136 dvl Set the Director's PID file before dropping privs. This fixes
139 kes Update AUTHORs file
140 kes Increase the default max concurrent jobs to 20 in FD and SD to
141 correspond with the default .conf files.
142 kes Rewrite the Win32 service routines. This eliminates the 3 copies
143 some different, of the same file created by RN when porting the
145 kes Rearrange some of the Win32 directories and the placement of the files
147 kes Set DEVELOPER flag in version.h
149 ========================================================================
150 Release Version 2.2.0
152 kes Apply a second doc patch from Marc.
153 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
154 improves the tips section that discusses how to setup multiple
157 kes Update bat README file.
158 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
159 corrects a typo in the Recycle status check in db_find_next_volume().
160 This will probably fix a number of annoying problems with multiple
162 kes Modify most of dird/msgchan.c to use bsock class calls rather than
163 bnet calls -- no functionality change.
165 kes Modify the Verify output to specify if files are missing on
166 the Volume(s) or disk. Fixes confusion in bug #916.
167 kes When more than one Volume is read in a migration job, the last
168 Volume bytes reported are from the last read volume rather than
169 the last written volume. Fixed. This fixes bug #910.
170 kes Fix display of Recycle flag after update volume=foo recycle=yes.
171 It previously printed New Recyle flag is: no. This fixes bug
174 kes Correct seg fault when switching tape drives during restore.
175 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
176 be used until after 2.2.0 release.
178 kes Remove fnmatch() in SD that permitted wild card specifications.
181 kes Fix %g in filename returned by SQL for browse tree reported by
183 kes Fix configure so that it puts config.out in the cwd rather than
185 kes Attempt to fix the locking problem reported by Eric in bug #906.
186 kes Make berrno class to leave errno unchanged after constructor call.
187 kes Make bnet_server use the heap rather than the stack to allocate
188 its socket fd pointers to avoid a crash at termination. Problem
189 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
191 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
192 and putting it in depkgs-qt along with Qt4.3.
194 kes Rework code in acquire.c that switches drives for reading when
195 the Media Type does not match. This should fix bug #906
197 ebl Fix a director segfault during job setup #907
198 kes Correct seg fault in postgresql when first operation returns no
199 rows. Fixes Dirks File browser problem seg fault with bat.
201 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
202 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
205 kes Implement PopUp YES/NO dialog for bat.
207 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
209 kes Correct RunScript to terminate job in FD on failure.
210 kes Change abort_on_error and AbortJobOnError to fail_on_error
211 and FailJobOnError in RunScripts.
212 kes Minor tweaks of code formating in RunScripts, principally to
213 avoid depassing 80 columns.
215 kes Eliminate one #ifdef Win32 in bsmtp
216 kes Implement grow tool to grow a file for testing very large databases.
217 kes Add big-vol-test to test Bacula seeking with > 5GB.
220 kes Modify find_next_volume() to return all values in Media record.
221 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
225 kes Update Release notes
227 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
228 Warning, in previous beta version, all media get from scratch keep their
231 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
232 This should fix bug #842. Made a note to look at removing the temp
233 files at the end of the install.
234 kes Add ability to mount and unmount a file device providing it is
235 marked as being removable and has the appropriate mount and unmount
236 commands defined in the Device resource. This fixes bug #830.
237 kes When applying a storage override, release all previous storage
238 definitions rather than just prepending the new storage.
239 This should prevent a good deal of confusion.
241 kes Implement ./configure search for qwt libraries.
243 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
244 Win32 FD. This should fix bug #893.
245 kes Remove an unnecessary beep in Win32 init code.
246 kes Update copyright dates in Win32 executable about boxes.
247 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
248 code with a BSD getopt.c and getopt.h.
249 kes Remove sched.h from the Win32 compat directory -- not used.
250 kes Remove the Exit menu item from the Win32 tray monitor. If you really
251 need to shut it down, do it through the services panel or the command
253 kes Remove some inappropriate Bacula FSFE copyrights.
254 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
255 kes Fix regress config non-portable test as pointed out by
256 Florian Heigl <florian.heigl@gmail.com>
257 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
258 as pointed out by Florian Heigl <florian.heigl@gmail.com>
260 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
261 Reported by Frank Sweetser.
265 kes Fix client-only build.
266 kes Integrate client-only fixes for bsys (initgroups) and conio from
267 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
268 kes Make arguments to get_scratch_volume() in same order as other
270 kes Rework the prune_volumes() subroutine so that after purging and
271 no volume found in desired pool, it will check for a scratch
272 volume. This prevents recycling the whole scratch pool.
273 kes Add code to status storage to print boffset_t (largefile support).
275 kes Move qwt (Graphics libarary for Qt4) to depkgs.
276 kes You now need a --with-qwt=<dir> to be able to build bat.
277 kes Update src/win32/cats/bacula_cats.def to include the new
278 db_get_query_dbids() call on Win32.
280 kes Correct a problem when selecting a scratch volume and moving
281 it to another pool that lost some columns.
282 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
283 kes Enhance Autochanger error messages to include Volume and device name.
284 kes Rework prune_volumes() code to take account of InChanger flag,
285 and to handle recycling volumes going to the Scratch pool and
286 current pool because the RecyclePool directive.
287 kes Implement a better and more efficient db_get_query_dbids() to
288 handle creating and passing back a list of DBIds.
292 kes Start work on new more efficient DBId subroutine. First use
293 will be for recycling volume to Scratch inchanger.
294 kes Increase number of JobIds in pruning from 1000 to 10000.
295 This to be replaced by above routine.
296 kes Begin implementation of building Qt4 on Win32.
297 kes Correct typo in fix I added for bad TLS shutdown.
298 kes Pull 2.0.3 patches into patches directory.
299 kes Update Release notes. Include qt-console in line count.
300 kes Update Projects file.
302 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
303 bug in migration code where a job that spanned two volumes
306 kes Implement new BST_DESPOOLING blocked state. Change from locking
307 during despooling in SD to blocking. This means that other threads
308 can work with the device structure, in particular the reservations
309 system while despooling.
311 kes Fix return in reservation message queue that missed clearing
312 the jcr lock (implemented 26Jun07 below).
313 kes Rename a number of dev methods to make locking function names
315 kes Document locking in lock.c. Move lock structures to new file
318 kes Move reservations message lock to lock jcr only this
320 kes Move main SD locking code into lock.c (new file).
321 kes Update Win32 build to include lock.c
325 kes Dirk committed the qwt library code for drawing graphs in bat.
326 kes Tweak install of qwt so that it is integrated with ./configure.
328 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
329 out by Eric (my typo).
330 ebl Fix configure.in to get batch mode enable
331 kes Return correct string from authenticate.cpp in bat when connecting
333 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
334 spurious line drops when using TLS.
335 kes Do not file reparse points when restoring a file that already
338 kes Implement Windows reparse points -- similar to directories, but
339 we do not descend into it. This is a first cut. They seem to
340 be backed up, but restore is not yet tested.
341 kes Remove restore_blocking in tls code when shutting a socket to leave
342 it in blocking mode. Hopefully this will fix the encryption bug
343 reported by Frank Sweetser.
344 kes When opening a file for backup, tell the OS that we are going to
345 read it sequentially -- optimization.
346 kes Change variable names in authenticate_director() to not conflict
347 with member names in bat. Caused great confusion with compiler,
350 kes Queue openssl error messages in case of comm problem.
351 kes Do shutdown() call if socket terminated.
352 kes Remove some duplicated code in tls.c
353 kes Move more of the bsock member variables into private and access
355 kes Add Frank Sweetser's tls-test to the regression suite.
357 kes Add Swedish sv.po file
359 kes Don't print clock skew message in FD if less than 3 seconds diff.
360 kes Add a bit of VSS info to status client.
361 kes Implement a first cut of Vista VSS, using Win2003 code.
365 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
366 loaded tape but uses first drive).
367 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
368 This was indeed a Win32 issue.
370 kes Simplify search of autochanger for in-use Volume.
371 kes Fix exit condition of check for in-use volume. kes Remove
372 inappropriate my_postgresql_free_result() in db_close()
374 kes Fix bad return in FD when encryption signature not found.
375 Probably caused a crash.
376 kes Inhibit missing encryption signature error messages for
377 file types where no signature computed.
378 kes Correct inverted check on autochanger in reservation system.
379 kes Tweak debug code in autochanger reservation.
381 kes Add some additional locking in the cats directory in subroutines
382 that modify packet variables called from batch insert.
383 kes Rework how dcrs are allocated. new_dcr() can now be called
384 with an existing pointer, and it will simply clean it up.
385 This allows the reservation system to test various different
386 devices, and will permit easy device changes.
387 kes A bunch of changes all over to handle new new_dcr() calling
389 kes Work more on the Volume management in the SD. Remember Volumes
390 for tape drives and for autochangers (even virtual disk changers).
391 kes When looking at the Volume list to reserve a drive, handle
392 autochanger names correctly by interating through the changer
393 devices. Also call the Director to see if a Volume is suitable
395 kes Fix some bugs in bscan. Make sure all media records are written.
396 Make sure that valid JobMedia records are written for disk files.
397 Previously they were completely wrong.
398 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
399 that the URLs don't change and so that the developers will all
400 work off the same copy. Rebuild from scrach.
401 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
405 kes Fix seg fault in FD from incorrect digest size.
406 kes Fix argument to non-OpenSSL crypto.c subroutine.
410 kes Remove a few malloc()s from the encryption code.
411 kes Use the class calls to bsock in filed/backup.c and restore.c in
412 place of the old bnet_xxx code.
413 kes Implement code that does an on the fly calculation of the
414 signing digest during restore of encrypted files. It makes
415 a best guess at the algorithm, and if it is not correct, will
416 then revert to the old code which reads the file after it is
418 kes Implement at least one missing crypto stream in stream_to_ascii()
419 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
420 #877 where a reload with bad syntax causes Dir to exit.
422 Cut: 2.1.14 beta (not released)
424 kes Do not free a volume on a tape drive until another volume is
425 mounted and read, or the autochanger unloads the volume.
426 This should help the SD re-use volumes that are already mounted,
427 and should fix bug #886.
428 kes Apply patch from user brettedgar that allows gnome2-console include
429 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
430 kes Apply patch from Lucien Weller that fixes day of week calculation
431 because of DST flag problem. Fixes bug #887.
433 kes Move find_next_appendable_volume() to after acquiring a valid device
434 in reserve.c. This fixes bug #864 -- confirmed by reporter.
436 kes Unable to reproduce bug 872. However added additional testing for
438 kes Bug #874 resolved by documenting SQLite limitations.
439 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
440 kes Bug #881 resolved by removing typo in mtx-changer script.
441 kes Made Frank Sweetser's wiki the official Bacula wiki with his
442 approval. Added a link to the wiki on the web page, and implemented
443 a backup from http://paramount.ind.wpi.edu
445 kes Fix update allfrompool to pass pool name.
447 kes Convert to pure GPL v2 license.
448 kes Fix sscanf problems reported by Peter Buschman that caused
449 a bus error on Solaris.
450 kes Rework (simplify) the select prompt in bat.
451 kes Move get_jobid_from_tid() into lib and create a
453 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
454 should definitely fix the problem of lost error messages in the
456 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
457 kes Eliminate tcpd.h from the project. Enclose the #include from the
458 library with extern C ...
459 kes Add print of signal name when a signal is trapped.
463 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
465 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
466 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
467 makes SQLit3 run 30 times faster, though a bit less safe.
468 kes Implement --with-batch-insert in configure and detection of thread
469 safe libraries. It is on by default, but turned off if no thread
470 safe library (e.g. SQLite 2) is available.
472 kes Fix Bacula PostgreSQL buffer overruns.
473 kes Do better checking for NULL results returned from PostgreSQL;
474 implement retry for failed queries; clear results buffer after
475 failed query. Hopefully this will correct the PostgreSQL failures.
477 kes Implement algorithm to handle only one appendable volume with
478 Prefer Mounted Volumes = no.
479 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
480 returned from a query.
481 kes Make volume lock recursive.
482 kes Implement an additional volume reservation algorithm that
483 starts by considering all reserved volumes then uses the
484 old brute force algorithm of searching the resources to
485 find a suitable device.
486 kes Add new reservations debug code and refine the old code.
487 kes Update the win32/dll/bacula.defs file.
489 kes Tweak reservations algorithm to permit a few more cases, i.e.
490 volume reserved, but on different drive, ...
491 kes Enhance SD status to include Pool and Media Type for drive in a
492 more readable format (a bit longer).
493 kes Fix PostgreSQL double free.
495 kes Minor refactoring of restore decryption code.
496 kes Add code to smartall.c to detect double free of a buffer.
498 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
499 so that bsmtp will create a correct email address (mailbox only).
500 kes Modify 'memory' command so that the buffers are listed as 'In use'
501 to avoid confusion with Orphaned buffers.
502 kes I reworked the OpenSSL include/lib flags to be handled in
503 the standard Bacula way, which should fix bug #863 concerning
504 non-standard OpenSSL libraries.
506 kes Implement Help Browser window for bat.
507 kes Fix reload bug that reset StorageId to zero.
509 kes Fix TLS #ifdefing when TLS turned off.
510 kes Ensure that when labelling a tape with Slot=0 that InChanger
512 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
514 kes Add StartTime to final uar_sel_jobid_temp query so that we can
515 add DISTINCT (required by PostgreSQL).
516 kes Implement BSOCK authenticate_director() method. Eventually will
517 authenicate all daemons.
518 kes Move several more functions into the BSOCK class.
520 kes Add code to tell the OS that we no longer need a cached
521 file that we were reading. In findlib/bfile.c. Also,
522 only cache files that we are reading. Thanks to
523 Tobias Oetiker <tobi@oetiker.ch> for the idea.
524 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
525 kes Implement script to automatically generate cats and dll .def
527 kes Update README.mingw32 to include new .def file generation.
528 kes Correct typo in UTF-8 error message as reported by:
529 jhernandez <julianhernandez@gmail.com>
530 kes Add additional sm_check() code on debug level 1.
531 kes Set default debug level to 1.
532 kes Trap SIGABRT in attempt to get traceback.
534 kes Reduce bat connect timeout from 30 to 15 seconds.
535 kes More restructuring and implementing BSOCK class in place of
537 kes Remove a few unnecessary malloc() tests in crypto code.
538 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
539 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
540 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
542 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
544 kes Fix Verify InitCatalog. The attributes were not pointing to the
545 correct saved location.
546 kes Implement message callback so that GUI is sure to get all
547 daemon messages. Currently displayed in a dialog in bat.
548 kes Ignore SIGUSR2 (Bacula timer) in bat.
549 kes Apply regress patch from bug #859 to allow regress to work
550 with Solaris compiler.
552 kes Begin adding TLS support to bat.
553 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
554 clean up lex.c and make it more readable.
556 kes Move more bnet functions into the BSOCK class.
557 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
558 kes Complete change of berrno strerror() method to bstrerror()
562 kes Cleanup incorrect email addresses in bsmtp.
563 kes Make bat display initial messages rather than discard them.
565 kes First cut of adding .mod to the run command.
566 kes Implement auto display of messages in bat.
567 kes Enhanced preferences to allow all Bacula output to be
570 kes Try to make bsmtp date routines more generic.
571 kes Fixed bug #856 autochanger documentation.
572 kes Rework bsmtp date editing for Win32. This fixes bug #854.
573 kes Add new cats entry point so Win32 builds.
575 kes Attempt to fix bsmtp date editing on OSes without %z editing.
577 kes Do better checking for the MySQL 64 bit libraries looking for both
578 .a and .so libraries.
579 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
580 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
581 kes Require the thread safe version of MySQL during configure. Thanks
582 to Andre Noll for pointing this out.
583 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
584 continuing in migration code.
585 kes Apply implementation of tray-monitor font derived from gnome-console
586 submitted by Andreas Piesk <a.piesk@gmx.net>
588 kes Eliminate important memory loss in SQLite
589 kes Fixed the batch insert MySQL thread specific data that was not
590 being freed. See cats/mysql.c:db_thread_cleanup().
591 kes Fix restore before command.
592 kes Convert old hdr.name to name() in a few places.
593 kes Implement update jobid command.
594 kes Return all time_t dates in db_get_job_record()
595 kes Stop watchdog in SD earlier.
596 kes Put Pool just after Storage in please mount message.
597 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
600 kes Update the po files.
601 kes Fix Verify InitCatalog by making it cache attributes.
603 kes Change name bacula-bat to bat for man 1 page to correspond to
605 kes Check for client and store NULL pointers in status command. This
607 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
608 kes Fix sign extended editing of %p.
609 kes Clean out a little old #ifdefing in cats/mysql.c
611 kes If time diff between DIR and FD is more than 600 seconds convert
612 INFO message to WARNING.
613 kes Implement heap size display in status for all daemons.
614 kes Attempt to fix MySQL db open memory loss (not successfull).
615 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
616 kes Eliminate memory loss in MySQL (possibly other SQLs) during
617 Query. This looks like a MySQL but but by doing extra releases,
618 the memory goes away. This should fix bug #847.
620 kes When backup fails, cancel SD before waiting for sd termination.
621 kes If SD is waiting for FD to connect during cancel, wake up the
623 kes Fix fsf code so that errno is correctly reported.
624 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
626 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
627 so that Bacula doesn't later stumble into a seg fault.
628 kes Use the term Restore Client in the restore Job report.
629 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
630 the original job's FileSetId.
631 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
632 spooling in migration jobs. Not yet tested.
633 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
634 reading conf file from a pipe. However, do it with open_bpipe()
635 rather than popen. Not yet tested.
637 kes Fix an ugly bug where the VolCatBytes were getting updated
639 kes Implement bconsole memory command that prints current memory
640 usage, plus smartalloc dump.
641 kes Clarify some error messages in backup, admin, and migrate.
642 kes Shrink label dialog to smaller size.
643 kes Invert Cancel OK buttons on restore to be OK Cancel.
644 kes More strerror() to bstrerror() conversions.
646 kes Start implementing bstrerror() in place of strerror().
647 kes Stripping path -- seems to work.
649 kes Prevent door and port files from being restored (mostly
651 kes Free an unreleased buffer in compat code.
652 kes Change console Job name from *Console* to -Console- to eliminate
653 Win32 filename problems. Put Win32 path separator when creating
654 Console file. This fixes bug #846.
655 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
657 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
659 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
660 to force Win32 error message.
662 kes First cut strip path. The data should be passed to the FD,
663 but nothing is done with it yet.
664 kes Enhance the digest and signature routines in the crypto
665 library to accept a JCR and to use it to print error messages
666 so that they will go in the Job report rather than the daemon's
668 kes Simplify some of the verify signature code.
669 kes Simplify a few of the alternative returns in the signature
672 ebl Use only POSIX regex instead of GNU regex in breg.c for
673 File relocation. It fix broken freebsd compilation.
674 kes Convert all other Dir files to use new ua class message
676 kes Tentative fix for missing digest signature in bug 807.
677 kes Correct handle problem in new win32_ftruncate routine.
678 kes Convert ua_purge.c and ua_update.c to use new ua class
679 message routines for bat.
681 kes Correct incorrect installation of LICENSE in Win32 installer.
682 kes Display LICENSE at the beginning of the Win32 install.
683 kes Attempt to correct the need for the png files to be installed
685 kes Reapply my bat.conf install script in qt-console. I think I
686 editted bat.pro instead of bat.pro.in and it was lost.
687 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
688 the /var/lock/subsys for subsysdir. Also corrects typos in the
691 kes First cut update job.
692 kes Correct configure to include qmake of src/qt-console directory.
694 kes Make restore job yes/mod/no print in one command so GUI works.
695 kes First cut implementing backup and restore client.
696 kes Correct editing in Verify output that caused a seg fault.
698 kes Insure that bat.conf is not overwritten during installation.
699 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
700 while I was implementing migration in March 2006 !
702 ebl Cleanup file relocation, using char *RegexWhere instead of
703 char *where + bool where_use_regexp
704 kes Update some manpages and add bat manpage.
705 kes Make a first cut at converting bacula.spec.in for bwx-console
707 kes Apply patch from John Goerzen to add hostname as fourth argument
708 to make_catalog_backup script.
709 kes Fix typos I introduced into bsmtp.c
710 kes Make pm_strxxx() routines handle input of NULL pointer. This
711 is to protect from NULL pointers returned from SQL databases.
712 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
713 kes Add more debug to FIFO code -- fix fifo regression test.
715 kes Implement posix_fadvise in FD, and for reading spool files in SD.
716 kes Add thread timer to bnet_connect() to break from OS if wait time
719 kes Update Win32 build to include new files, new symbols, and
721 kes Implement socket level heartbeat (tcp_keepidle)
722 ebl Commit File relocation patch
723 kes Make bat have 'make install' target.
724 kes Warn during install if old gnome-console binary found.
725 kes Warn during install if old wx-console binary found.
726 kes Add -8 option to bsmtp command line to add content type utf-8.
727 Fixes bug #809. (Character coding problem in bsmtp).
728 kes If < is found in target (from, to, cc) then do not enclose the
729 target in < > in bsmtp. Fixes bug #772 (malformed address).
730 kes When printing certain items in dbcheck, stop after 300000.
731 Fixes bug #822. (dbcheck loops).
732 kes Incorrect status in Dir after waiting for mount with poll set.
735 kes Extend idea of Prefer Mounted Volumes to mean a volume about
737 kes Print waiting to reserve a device every 5 mins.
739 kes Don't call close_part in label.c if tape and relabel.
740 kes Don't free volume if busy in close() -- should help with
742 ebl Fix #824 RunScript bug (After script could be execute twice)
743 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
744 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
745 Add a regression script to test RunScript
747 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
750 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
751 deprecated. No additional bugs will be fixed, and they will be dropped
752 in a future release (probably 2.4.0).
753 kes Change name of wx-console to bwx-console to make it more Bacula
755 kes Change the name of gnome-console to bgnome-console to make it
758 kes Some time in March, a Feature Request with patch from Jorj Bauer
759 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
761 The ability for the director to validate a Client (FD) CN against
762 an arbitrary set of patterns rather than the hostname, with
763 A new 'TLS Allowed CN' set of directives which are implemented
764 in the Client resource. Then pattern matching is used in place
765 of hostname matching against the Certificate's CN. As an example, we
766 have certificates which (a) use a local CA, and (b) have a CN of the
768 kes Add new/changed entry points to Win32 build
769 kes Create unaccepted-projects for projects that are not accepted.
770 kes Simplify locking in the reservations system.
771 kes Add more debug code in reservations.
772 kes Make sure error condition on reserving a volume is handled correctly.
773 kes Correct handling of volume_in_use.
774 kes Correct handling of initializing a device.
775 kes Move handling of broadcasting releasing a device into release_device().
776 kes Correct attaching dcr to dev so that it is only done if device
777 is properly initiated.
779 kes Locking debug level tweaks in SD.
780 kes Tweak new Volume code.
782 kes Add exec external-command [wait-seconds] to bconsole. This
783 executes the external-command. Note! normally external-command
784 should be enclosed in double quotes.
785 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
786 it should normally be off in a production system.
788 kes Implement die command for SD so that we can force it to dump.
789 kes Implement SD lock debug code.
790 kes Implement new algorithm for keeping Volume list in SD. It
791 is now owned by the device.
793 kes Implement new code for freeing in use volumes that should
794 resolve if not all, some of the problems of multiple drive
795 tape conflicts described in bug 801.
797 kes Fix gui/bacula-web/images files in svn.
798 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
800 ebl Fix a bug in batch mode (in string escape)
801 kes Correct migration prune SQL typo that crept in in a
804 kes Move bnet_despool() into class in bsock.c
805 kes Modify job report to include director name and Build OS.
806 kes Move drop root privilege and check_catalog() before fork.
807 kes Add update database scripts (version 9 to 10) to updatedb directory.
809 ebl Check size and age of each file after its backup to see if
810 it has changed during backup, if 'checkfilechanges' is set.
811 The FD will do an extra check (stat(2)) after
812 each file backup. mtime, ctime and size are compared with
813 'before backup' information. If time or size mismatch, an
814 error message will be generated. You must upgrade FD to use it.
816 kes Make database name and user configurable
817 --with-db-name=xxx --with-db-user=xxx
818 kes Add back database type to message.c for debugging.
820 kes Implement dir_sql() which issues an SQL query.
821 kes Modify bat medialist to use dir_sql() and do some minor C++
822 formatting as well as eliminating a number of pointers, simplifing
825 kes Fix some of the mtx-changer grep commands for tape label readers.
826 kes Convert a number of bsendmsg into the appropriate send/warning/error
828 kes Suppress the using database message in the .sql command.
829 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
831 kes Add context menu for floating a window.
832 kes Some minor cleanup and name changes in qt-console
833 kes Add doing mt setblk 0 in Win32 mtx-changer.
834 kes Apply Martin's bug fix to move definition of ENODATA for
836 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
839 kes More pruning cleanup.
840 kes Turn on wait_for_drive by default in mtx-changer.
841 kes Turn on Batch insert code by default as it now passes regression.
842 kes Add ./configure --enable-bat to enable building of Bat.
843 No install yet though.
845 kes Implement a new .sql command for bat.
846 kes Implement code to turn off pruning in obtaining the next volume.
847 Pruning is turned off for the status dir command, but turned on
848 for SD requests and for the list nextvolume command.
850 kes Correct Qmsg() that was not updated correctly when committing a
851 previous change (probably the recent TLS patch).
853 kes Write new subroutine is_volume_purged() that explicitly checks
854 if the Volume is purged, and if so marks it as such. This should
855 resolve problems reported about needing to mount twice to recycle
857 kes Rewrite pruning algorithm to do more work in the SQL engine, and
858 to pass a list of JobIds to be deleted to SQL. Also, minimize the
859 amount of duplicated code.
860 kes Do volume pruning only for the Media Type desired (reduces pruning time
861 if multiple Media Types are in the same pool).
862 kes Implement more detailed info in the Job report for the Bacula version
864 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
866 ebl Add bbatch tool to bench database and insert mode.
867 Fix sql quote stuff in batch mode
868 Fix sql stuff for mysql
870 kes Correct problems with am/pm scheduling. Fixes bug #808.
871 kes Implement new prunning code that prunes up to 1000 jobs at
872 the same time. The same technique can be applied to a number
873 of other prune/purge subroutines.
874 kes Add an insanity check when starting a new tape job to ensure
875 that the tape position has not been changed. If so fail the
877 kes Fix Win32 build for dlls to add the folllowing:
878 src/lib/bsock.c -- new file with new entry points
879 src/lib/dlist.c -- new entry points
880 src/cats/sql_create.c -- new entry point
881 src/cats/sql_cmds.c -- new DATA item exported
883 ebl batch mode cleanup bscan-test is ok now.
884 kes Implement SD code to check length of disk volume before appending.
886 kes Correct return status on db_batch... routines.
887 kes Add call to db_write_batch_file_records() to migration code.
888 ebl Fix AfterJob timing
889 kes Move the checking of the database in initializion of the Director
890 to after we drop privileges. This avoids the need for both root
891 and bacula access to the DB.
892 kes Correct a misplaced variable definition in src/filed/backup.c
893 kes Correct how the new batch insert db_create_attributes_record()
894 uses the arguments. Caused a seg fault in bscan.
895 kes Implement lock() and unlock() methods in DEVICE class.
896 Implement block() and set_block(xx) methods in DEVICE class.
897 kes Modify bnet_connect() so that it uses time() to check for the
898 wait time expiring (on some OSes, some system calls may not
900 kes Modify Verify to obtain the previous JobId when it is actually
901 running rather than at schedule time (as it was in 1.38.x).
902 kes Fix src/job.c to handle MaxWaitTime correctly. This should
904 kes When checking pid in pid file, continue running if the pid is
905 the same as ours. This occurs on IRIX after a system crash.
908 kes Extend new GUI API.
909 kes Make the ua structure a class, and implement send_msg(),
910 error_msg(), warning_msg(), and info_msg().
912 kes Apply fix from for building wx-console on the Mac from
914 kes Implement new select mechanism for GUI programs.
915 kes Reorganize initialization of stackedWidgets in bat.
917 kes Add updated nagios plugin supplied by Christian Masopust.
919 kes More bat implementation.
920 kes File migrate bug with Pool Occupancy using mediaid instead
921 of jobids. Fixes bug #795.
922 kes Fix orphaned buffers in filed backup and verify due to
923 crypto buffers not freed during errors. Fixes bug #789.
924 kes Extend new GUI api code to tree commands.
925 kes Ensure that tree and dot commands check console ACLs.
926 kes Permit marking directory with trailing slash.
927 kes Allow 20 console connections (instead of only 10).
929 kes Add smartctl call to bacula-sd.conf as an example of getting
932 kes Modify jobq.c to let simultaneous restore jobs run. This may
933 cause them to fail if they cannot get a drive.
934 kes Add Client Connect Wait to Storage daemon to permit users to
935 modify the time the SD waits for a FD connection.
937 kes Correct virtual changer check which was backwards. This caused
938 volumes to be unloaded into slots already occupied.
940 kes Apply Command ACL filter to JobId list in restore command.
941 kes Correct typeo in var.c patch.
943 kes Don't let Bacula prune File or Job records for the current Job.
944 kes Fix variable substitution pad + inc bug reported (with patch)
947 kes Correct SQLite log table index as reported by Luca Berra.
949 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
951 kes Begin implementing new comm signals for API.
952 kes Fix a few places in lib/message.c where the open fd may
954 kes Continue implementing lib/bsock.c (real class). Make jcr,
955 who, host, and port private. There are new methods to access
956 them for non-class use. This required touching a number of files.
958 kes Add LANG=C to autoconf/randpass so it works with languages other
959 than English. Fixes bug #788.
961 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
963 You will not be able to generate Include/Exclude list any more.
964 It will be fixed soon.
965 If you want to use this, you can apply
966 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
968 kes Restore of sockets created false error messages because Bacula
969 no longer restores sockets, but the code was still trying to
970 set the attributes on a non-existent file. Reported by a user.
971 ebl finish RecyclePool feature
972 Media will takes Pool.RecyclePool
973 when moving from Scratch to a Pool or when user will do
974 update volume=xxx frompool
975 To use it, add RecyclePool = aPool to your Pool resource
978 RecyclePool = Scratch
982 kes Expand new BSOCK class adding signal() and new BNET signals.
983 kes Begin enhancing the dot commands adding a new API function
984 that returns more information and will make it easier
985 to interface to the Director from a program.
987 kes Make DEVICE fd private. Its new name is m_fd, and can be
988 obtained with dev->fd() outside the class. This is the
989 first of many DEVICE members to be made private.
990 kes Implement Michael Renner's idea on having a virtual disk
991 changer. I made some minor modifications (e.g. I did not
992 implement the Virtual Changer directive, but simply set
993 the Changer Command to an empty string.
995 kes Implement a BSOCK send() method that writes the whole record
996 in a single write() request rather than in two.
997 ebl add update volume=xxx recyclepool=yyyy
998 volume takes recyclepool from pool when using update volume=xxx from pool
1000 kes Fix encryption deblocking bug, which caused some restored files
1001 to be truncated. This fixes bug #763.
1002 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1003 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1005 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1006 ebl Use btime_t instead of uint64_t in media patch.
1008 kes Optimize the use of the database a bit in the Status dir command.
1009 Only open it when needed, ensure that if any previous database
1010 was opened, it is closed.
1012 kes Correct VolCatBytes bug from media patch.
1013 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1014 in the case of orphaned records.
1015 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1016 and File records in 300K chunks to be more efficient. This
1017 idea came from Juan Luis Frances (if I remember right).
1018 kes Apply Eric's scratch patch that moves a purged Volume to
1019 the RecyclePool. Question: how is RecyclePool set? what
1020 happens to the ScratchPool?
1021 kes Apply Eric's media patch that collects read/write media
1022 times as well as byte counts. This patch requires a
1023 simultaneous upgrade of the DIR and SD. Note, there
1024 should be some way to turn off timing. I'm not sure
1025 times are in Bacula units.
1026 kes Apply Eric's batch-insert patch.
1028 kes Update projects list.
1030 kes Implement Include/Exclude file lists in FD as dlists using
1031 the new dlistString class. This permits efficiently having
1032 large include/exclude lists and completes project Item 25.
1033 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1034 console is authorized to cancel the job. This fixes bug
1036 kes Modify SD so that the VolCatJobs medium record is updated
1037 at the beginning of a Job rather than the end. This
1038 fixes bug #775 where exceeding MaxVolJobs caused jobs
1040 kes Added a mutex around getting and setting Volume information
1041 so that multiple simultaneous jobs will single thread.
1043 Switch to using Subversion
1044 kes Remove src/pygtk-console/ from configure
1046 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1047 plus the entrypoints.
1048 kes Apply patch supplied that corrects debug print
1049 in canceling jobs for max run time. Supplied as
1050 part of bug #621, which was previously fixed.
1052 kes Test on job_canceled() and sd_msg_thread_done inside
1053 loop starting the message thread to avoid a race condition.
1055 kes Remove rl_catch_signal from console.c as it conflicted
1056 with the header definition. Fixes bug #765.
1057 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1059 kes Clarify some stored/acquire messages to indicate if the
1060 problem is with read or append.
1062 kes Fix memory leak with storage ids in cats/sql_get.c
1063 kes Terminate watchdog earlier to avoid reference to released
1064 memory -- reported by Jason Austin.
1065 kes Move closing the database from jobq.c to the director daemon
1066 termination routine. This fixes memory leaks for shadow jobs
1067 (i.e. migration jobs).
1068 kes Free up the unique jobid chain items in migrate.c. This fixes
1069 a memory leak problem.
1070 kes Convert some ugly looking for statements to use foreach_alist
1071 in findlib/find.c. This will facilitate converting the structures
1072 to use dlist (for large include/exclude lists).
1073 kes Fix a bug in the btree.c and btree.h routines, then rename them
1074 rblist and add them to be built in src/lib. Include some new
1075 methods written by Rudolf Cejka that make the code more readable
1076 (hides some of the ugly casting).
1077 kes Add set_next() and set_prev() methods which make the code much more
1078 readable. Also add a new dlistString class that facilitates storing
1079 strings in dlists. To be used in the large include/exclude lists.
1080 kes Make some trivial modifications to lib/tree.h that use rblist
1081 rather than dlist for storing the tree links. This was suggested
1082 by Rudolf Cejka. The result of this is that the restore tree now
1083 uses red-black binary trees rather than simple linked lists. This
1084 should give rather dramatic speed improvements for directories
1085 contining large numbers of directories/files (more than 10000).
1087 kes Fix maxruntime bug #621.
1089 ebl Implement the include JobID in spool file name project.
1090 kes Reorder projects file in order determined by Jan 2007 vote.
1091 kes Implement item #12 on project list -- quick release of FD by
1093 kes Fix open of SQLite3 db where user does not have write permission
1094 so that DIR does not crash. Fixes bug #761.
1096 kes Add back missing @ in Win32 Makefile.
1097 kes Change 'Device not configured to autolabel' from INFO
1099 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1100 which should restart an indefinite # of times.
1101 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1102 other DIR specifications.
1104 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1105 Fix path quoting in SQLite scripts.
1106 Fix problems with SHGetFolderPath.
1108 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1110 kes Fix Job restart on error bug that promotes an Inc to a Full
1111 backup. This should fix bug #755.
1112 kes Add qt-console and first cut of code.
1116 kes Fix Bacula->Documentation link on Win32 to point to index.html
1117 instead of bacula.html. Fixed bug #750.
1118 kes Return JobId in db_get_job_record() when JobId==0. This should
1120 kes Do not release source pointers when restarting a failed job.
1122 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1123 This *should* fix bug #747.
1124 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1127 kes Modify USTORE constructor to set an empty store_source string,
1128 and don't copy the store_source string in a cancel. Hopefully
1129 this will fix Arno's seg fault, bug #744.
1130 kes Add back code to disable conio in configure. Fixes bug #743.
1131 kes Correct the Options scanner in the FD to correctly handle
1132 SHA1 option, which was eating the next option. Reported by
1134 kes Add code to indicate when the SD is spooling, spool wait, and
1135 despooling as requested by Alan Brown.
1137 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob