1 Technical notes on version 2.3
5 kes Correct search boolean for getting Volume info
6 ebl Cleanup batch code.
7 kes Back out one small change to the reservation system (reserving a volume).
8 kes Rework how a Volume is mounted. It is now much more intelligent and
9 will always attempt to use any mounted volume if possible and reduces
10 calls to the Director asking about volumes.
12 kes Turn off some code when batch insert not enabled.
13 kes Edit FD name in connect error messages.
14 kes Rework the reservation system to take into account that the Director
15 might give us a Volume that is different from the current one being
16 used, and to ensure that we don't exceed Maximum Volume Jobs.
17 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
18 fatal error with multiple jobs running'
19 kes Add more debug code in reservation system.
20 kes Implement maxvol-test to check bug #947.
22 kes Add code to handle tray monitor separated from Win32 FD.
23 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
25 kes Add missed return in fixing verify bug -- trunk only.
26 ebl Fix a command parser issue causing a director segfault.
27 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
29 kes Increase the max block size to 4MB fixes bug #957.
30 kes ERABT if user sets min block size > max block size. Fixes bug #956.
31 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
32 is not properly mounted (recognized) during a poll.
33 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
34 Job that has differences reports Verify OK.
35 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
37 ebl Add an option to operate on all pools with update vol parameters.
38 This complete the project 20. Patch from Nigel Stepp.
39 ebl Add history support to bconsole when using readline.
40 Using Ctrl-D to exit doesn't update .bconsole_history
41 kes Modify new volume algorithm to use max MediaId for generating next
42 volume number rather than the count of Volumes. This should essentially
43 eliminate the failure rate if some volumes were deleted. Bug #921.
44 kes Begin implemention of Optimize Job Scheduling.
45 kes Implement restore callback that Dirk and I agreed on for bat
46 restore. This fixes bug #928. Restore of backup of zero files fails.
47 kes Fix SQL Catalog logging which broke with new db_escape_string
50 kes Fix bacula_cats.def for new db_escape_string().
51 kes Increase size of name string when FD making connection to SD.
52 May fix bug #953. FD->SD connection failure.
54 kes Add code to help Dan debug 2drive-incremental-2disk test.
55 kes Add code to try to fix bug #908.
56 kes Add waits to multiple exit detection code to try to force pid
57 file to always be deleted.
58 kes Restore good dev.tar.gz to rescue set appropriate binary property.
60 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
61 trying to switch drives by checking for blocking before unblocking.
63 kes Cancel storage daemon in all cases where FD reports error. This
64 should fix virtually all cases of bug #920.
65 kes Fix db_escape_string() for MySQL which did not compile.
67 kes Fix error message that was clobbered when Dir tells SD it does not
68 have write permission on Volume. This should fix a minor point
69 in bug #942, but not the main problem.
70 kes Add code to cancel job in SD if FD connection fails. This should
72 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
73 dvl Pass jcr and db into db_escape_string() to enable better escaping
75 kes Fix migration code to get correct Volume name with multiple volumes
76 by skipping |. Fixes bug #936.
77 kes Implement patch supplied by Landon to fix bug #944 where using
78 TLS with bconsole uses 99+% of the CPU.
79 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
81 kes Move patches into patches directory.
83 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
86 ebl Using "m" in bconsole will show messages like before,
88 kes Fix bug #935, and probably also bug #903 where files were not
89 restored. MediaId was not properly set in JobMedia record after
92 kes Suppress chown and chmod error messages if the FD is not running
95 kes Apply Martin Simmons' patch that should turn off the new API usage
96 when batch insert is turned off allowing building on older
98 kes Add ./configure search in qwt-qt4 for qwt package
100 kes Bacula is now free of 3rd party GPL copyrighted code!
102 kes Add guid_to_name.c/h which replace idcache.
103 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
105 ebl Detect if new PosgreSQL batch insert API is present.
106 kes Correct incorrect mempool call causing Director crash. Occurs on
107 systems without va_copy().
108 sb Update spec files for 2.2.1 release
110 kes Fix memory pool call in ua_output.c. bug #934.
111 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
112 Add test program to fnmatch.c
114 kes Integrate patch to README.vc8 from
115 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
116 edit it to get it into Unix patch format.
117 kes Implement mkpath.c to replace old FSF makepath.c
119 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
121 Release Version 2.2.1
123 kes Update POTFILES.in
124 kes Cleanup a few underquoted AC_DEFUNs in configure
125 kes Apply patch from Martin Simmons that adds a test for va_copy to
128 kes Fix bug #921 by increasing the number of tries to create a new volume
130 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
131 can be called multiple times. Implement a version for machines
132 without va_copy() that gets a big buffer.
134 kes Integrate more portable zone offset code into bsmtp.c
135 Submitted by Attila Fülöp.
137 kes Fix bad SD->FD return status reported by
138 (James Harper) <james.harper@bendigoit.com.au>
139 ebl Fix a bug in read_close_session which return random status
140 thanks to James Harper
142 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
143 and directory names during restore of single file/directories.
144 kes Add sanity checks to .sql command when string is empty. Hopefully
145 that will resolve Dirks Director crash.
147 kes Apply patch submitted by Martin Simmons that corrects a seg fault
148 in the bsmtp chat subroutine when debug is >= 10.
150 kes Fix Director crash when running bat SQL queries.
151 kes Add David's notes on Item 8: Copy pools.
153 kes Rework projects file to be current and ready for a vote.
154 kes Enhance lex scanner error message.
156 kes Tweak LICENSE file to mention BSD code.
157 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
158 if specified on the ./configure.
159 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
160 This class is intended to allow us to open a second bsock to the
161 Director while in the restore subdialog.
163 kes Fix configure to create bat Makefile before creating dependencies.
164 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
165 kes Add a tooltip to the tray monitor.
166 dvl Set the Director's PID file before dropping privs. This fixes
169 kes Update AUTHORs file
170 kes Increase the default max concurrent jobs to 20 in FD and SD to
171 correspond with the default .conf files.
172 kes Rewrite the Win32 service routines. This eliminates the 3 copies
173 some different, of the same file created by RN when porting the
175 kes Rearrange some of the Win32 directories and the placement of the files
177 kes Set DEVELOPER flag in version.h
179 ========================================================================
180 Release Version 2.2.0
182 kes Apply a second doc patch from Marc.
183 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
184 improves the tips section that discusses how to setup multiple
187 kes Update bat README file.
188 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
189 corrects a typo in the Recycle status check in db_find_next_volume().
190 This will probably fix a number of annoying problems with multiple
192 kes Modify most of dird/msgchan.c to use bsock class calls rather than
193 bnet calls -- no functionality change.
195 kes Modify the Verify output to specify if files are missing on
196 the Volume(s) or disk. Fixes confusion in bug #916.
197 kes When more than one Volume is read in a migration job, the last
198 Volume bytes reported are from the last read volume rather than
199 the last written volume. Fixed. This fixes bug #910.
200 kes Fix display of Recycle flag after update volume=foo recycle=yes.
201 It previously printed New Recyle flag is: no. This fixes bug
204 kes Correct seg fault when switching tape drives during restore.
205 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
206 be used until after 2.2.0 release.
208 kes Remove fnmatch() in SD that permitted wild card specifications.
211 kes Fix %g in filename returned by SQL for browse tree reported by
213 kes Fix configure so that it puts config.out in the cwd rather than
215 kes Attempt to fix the locking problem reported by Eric in bug #906.
216 kes Make berrno class to leave errno unchanged after constructor call.
217 kes Make bnet_server use the heap rather than the stack to allocate
218 its socket fd pointers to avoid a crash at termination. Problem
219 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
221 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
222 and putting it in depkgs-qt along with Qt4.3.
224 kes Rework code in acquire.c that switches drives for reading when
225 the Media Type does not match. This should fix bug #906
227 ebl Fix a director segfault during job setup #907
228 kes Correct seg fault in postgresql when first operation returns no
229 rows. Fixes Dirks File browser problem seg fault with bat.
231 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
232 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
235 kes Implement PopUp YES/NO dialog for bat.
237 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
239 kes Correct RunScript to terminate job in FD on failure.
240 kes Change abort_on_error and AbortJobOnError to fail_on_error
241 and FailJobOnError in RunScripts.
242 kes Minor tweaks of code formating in RunScripts, principally to
243 avoid depassing 80 columns.
245 kes Eliminate one #ifdef Win32 in bsmtp
246 kes Implement grow tool to grow a file for testing very large databases.
247 kes Add big-vol-test to test Bacula seeking with > 5GB.
250 kes Modify find_next_volume() to return all values in Media record.
251 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
255 kes Update Release notes
257 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
258 Warning, in previous beta version, all media get from scratch keep their
261 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
262 This should fix bug #842. Made a note to look at removing the temp
263 files at the end of the install.
264 kes Add ability to mount and unmount a file device providing it is
265 marked as being removable and has the appropriate mount and unmount
266 commands defined in the Device resource. This fixes bug #830.
267 kes When applying a storage override, release all previous storage
268 definitions rather than just prepending the new storage.
269 This should prevent a good deal of confusion.
271 kes Implement ./configure search for qwt libraries.
273 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
274 Win32 FD. This should fix bug #893.
275 kes Remove an unnecessary beep in Win32 init code.
276 kes Update copyright dates in Win32 executable about boxes.
277 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
278 code with a BSD getopt.c and getopt.h.
279 kes Remove sched.h from the Win32 compat directory -- not used.
280 kes Remove the Exit menu item from the Win32 tray monitor. If you really
281 need to shut it down, do it through the services panel or the command
283 kes Remove some inappropriate Bacula FSFE copyrights.
284 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
285 kes Fix regress config non-portable test as pointed out by
286 Florian Heigl <florian.heigl@gmail.com>
287 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
288 as pointed out by Florian Heigl <florian.heigl@gmail.com>
290 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
291 Reported by Frank Sweetser.
295 kes Fix client-only build.
296 kes Integrate client-only fixes for bsys (initgroups) and conio from
297 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
298 kes Make arguments to get_scratch_volume() in same order as other
300 kes Rework the prune_volumes() subroutine so that after purging and
301 no volume found in desired pool, it will check for a scratch
302 volume. This prevents recycling the whole scratch pool.
303 kes Add code to status storage to print boffset_t (largefile support).
305 kes Move qwt (Graphics libarary for Qt4) to depkgs.
306 kes You now need a --with-qwt=<dir> to be able to build bat.
307 kes Update src/win32/cats/bacula_cats.def to include the new
308 db_get_query_dbids() call on Win32.
310 kes Correct a problem when selecting a scratch volume and moving
311 it to another pool that lost some columns.
312 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
313 kes Enhance Autochanger error messages to include Volume and device name.
314 kes Rework prune_volumes() code to take account of InChanger flag,
315 and to handle recycling volumes going to the Scratch pool and
316 current pool because the RecyclePool directive.
317 kes Implement a better and more efficient db_get_query_dbids() to
318 handle creating and passing back a list of DBIds.
322 kes Start work on new more efficient DBId subroutine. First use
323 will be for recycling volume to Scratch inchanger.
324 kes Increase number of JobIds in pruning from 1000 to 10000.
325 This to be replaced by above routine.
326 kes Begin implementation of building Qt4 on Win32.
327 kes Correct typo in fix I added for bad TLS shutdown.
328 kes Pull 2.0.3 patches into patches directory.
329 kes Update Release notes. Include qt-console in line count.
330 kes Update Projects file.
332 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
333 bug in migration code where a job that spanned two volumes
336 kes Implement new BST_DESPOOLING blocked state. Change from locking
337 during despooling in SD to blocking. This means that other threads
338 can work with the device structure, in particular the reservations
339 system while despooling.
341 kes Fix return in reservation message queue that missed clearing
342 the jcr lock (implemented 26Jun07 below).
343 kes Rename a number of dev methods to make locking function names
345 kes Document locking in lock.c. Move lock structures to new file
348 kes Move reservations message lock to lock jcr only this
350 kes Move main SD locking code into lock.c (new file).
351 kes Update Win32 build to include lock.c
355 kes Dirk committed the qwt library code for drawing graphs in bat.
356 kes Tweak install of qwt so that it is integrated with ./configure.
358 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
359 out by Eric (my typo).
360 ebl Fix configure.in to get batch mode enable
361 kes Return correct string from authenticate.cpp in bat when connecting
363 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
364 spurious line drops when using TLS.
365 kes Do not file reparse points when restoring a file that already
368 kes Implement Windows reparse points -- similar to directories, but
369 we do not descend into it. This is a first cut. They seem to
370 be backed up, but restore is not yet tested.
371 kes Remove restore_blocking in tls code when shutting a socket to leave
372 it in blocking mode. Hopefully this will fix the encryption bug
373 reported by Frank Sweetser.
374 kes When opening a file for backup, tell the OS that we are going to
375 read it sequentially -- optimization.
376 kes Change variable names in authenticate_director() to not conflict
377 with member names in bat. Caused great confusion with compiler,
380 kes Queue openssl error messages in case of comm problem.
381 kes Do shutdown() call if socket terminated.
382 kes Remove some duplicated code in tls.c
383 kes Move more of the bsock member variables into private and access
385 kes Add Frank Sweetser's tls-test to the regression suite.
387 kes Add Swedish sv.po file
389 kes Don't print clock skew message in FD if less than 3 seconds diff.
390 kes Add a bit of VSS info to status client.
391 kes Implement a first cut of Vista VSS, using Win2003 code.
395 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
396 loaded tape but uses first drive).
397 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
398 This was indeed a Win32 issue.
400 kes Simplify search of autochanger for in-use Volume.
401 kes Fix exit condition of check for in-use volume. kes Remove
402 inappropriate my_postgresql_free_result() in db_close()
404 kes Fix bad return in FD when encryption signature not found.
405 Probably caused a crash.
406 kes Inhibit missing encryption signature error messages for
407 file types where no signature computed.
408 kes Correct inverted check on autochanger in reservation system.
409 kes Tweak debug code in autochanger reservation.
411 kes Add some additional locking in the cats directory in subroutines
412 that modify packet variables called from batch insert.
413 kes Rework how dcrs are allocated. new_dcr() can now be called
414 with an existing pointer, and it will simply clean it up.
415 This allows the reservation system to test various different
416 devices, and will permit easy device changes.
417 kes A bunch of changes all over to handle new new_dcr() calling
419 kes Work more on the Volume management in the SD. Remember Volumes
420 for tape drives and for autochangers (even virtual disk changers).
421 kes When looking at the Volume list to reserve a drive, handle
422 autochanger names correctly by interating through the changer
423 devices. Also call the Director to see if a Volume is suitable
425 kes Fix some bugs in bscan. Make sure all media records are written.
426 Make sure that valid JobMedia records are written for disk files.
427 Previously they were completely wrong.
428 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
429 that the URLs don't change and so that the developers will all
430 work off the same copy. Rebuild from scrach.
431 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
435 kes Fix seg fault in FD from incorrect digest size.
436 kes Fix argument to non-OpenSSL crypto.c subroutine.
440 kes Remove a few malloc()s from the encryption code.
441 kes Use the class calls to bsock in filed/backup.c and restore.c in
442 place of the old bnet_xxx code.
443 kes Implement code that does an on the fly calculation of the
444 signing digest during restore of encrypted files. It makes
445 a best guess at the algorithm, and if it is not correct, will
446 then revert to the old code which reads the file after it is
448 kes Implement at least one missing crypto stream in stream_to_ascii()
449 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
450 #877 where a reload with bad syntax causes Dir to exit.
452 Cut: 2.1.14 beta (not released)
454 kes Do not free a volume on a tape drive until another volume is
455 mounted and read, or the autochanger unloads the volume.
456 This should help the SD re-use volumes that are already mounted,
457 and should fix bug #886.
458 kes Apply patch from user brettedgar that allows gnome2-console include
459 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
460 kes Apply patch from Lucien Weller that fixes day of week calculation
461 because of DST flag problem. Fixes bug #887.
463 kes Move find_next_appendable_volume() to after acquiring a valid device
464 in reserve.c. This fixes bug #864 -- confirmed by reporter.
466 kes Unable to reproduce bug 872. However added additional testing for
468 kes Bug #874 resolved by documenting SQLite limitations.
469 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
470 kes Bug #881 resolved by removing typo in mtx-changer script.
471 kes Made Frank Sweetser's wiki the official Bacula wiki with his
472 approval. Added a link to the wiki on the web page, and implemented
473 a backup from http://paramount.ind.wpi.edu
475 kes Fix update allfrompool to pass pool name.
477 kes Convert to pure GPL v2 license.
478 kes Fix sscanf problems reported by Peter Buschman that caused
479 a bus error on Solaris.
480 kes Rework (simplify) the select prompt in bat.
481 kes Move get_jobid_from_tid() into lib and create a
483 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
484 should definitely fix the problem of lost error messages in the
486 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
487 kes Eliminate tcpd.h from the project. Enclose the #include from the
488 library with extern C ...
489 kes Add print of signal name when a signal is trapped.
493 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
495 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
496 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
497 makes SQLit3 run 30 times faster, though a bit less safe.
498 kes Implement --with-batch-insert in configure and detection of thread
499 safe libraries. It is on by default, but turned off if no thread
500 safe library (e.g. SQLite 2) is available.
502 kes Fix Bacula PostgreSQL buffer overruns.
503 kes Do better checking for NULL results returned from PostgreSQL;
504 implement retry for failed queries; clear results buffer after
505 failed query. Hopefully this will correct the PostgreSQL failures.
507 kes Implement algorithm to handle only one appendable volume with
508 Prefer Mounted Volumes = no.
509 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
510 returned from a query.
511 kes Make volume lock recursive.
512 kes Implement an additional volume reservation algorithm that
513 starts by considering all reserved volumes then uses the
514 old brute force algorithm of searching the resources to
515 find a suitable device.
516 kes Add new reservations debug code and refine the old code.
517 kes Update the win32/dll/bacula.defs file.
519 kes Tweak reservations algorithm to permit a few more cases, i.e.
520 volume reserved, but on different drive, ...
521 kes Enhance SD status to include Pool and Media Type for drive in a
522 more readable format (a bit longer).
523 kes Fix PostgreSQL double free.
525 kes Minor refactoring of restore decryption code.
526 kes Add code to smartall.c to detect double free of a buffer.
528 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
529 so that bsmtp will create a correct email address (mailbox only).
530 kes Modify 'memory' command so that the buffers are listed as 'In use'
531 to avoid confusion with Orphaned buffers.
532 kes I reworked the OpenSSL include/lib flags to be handled in
533 the standard Bacula way, which should fix bug #863 concerning
534 non-standard OpenSSL libraries.
536 kes Implement Help Browser window for bat.
537 kes Fix reload bug that reset StorageId to zero.
539 kes Fix TLS #ifdefing when TLS turned off.
540 kes Ensure that when labelling a tape with Slot=0 that InChanger
542 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
544 kes Add StartTime to final uar_sel_jobid_temp query so that we can
545 add DISTINCT (required by PostgreSQL).
546 kes Implement BSOCK authenticate_director() method. Eventually will
547 authenicate all daemons.
548 kes Move several more functions into the BSOCK class.
550 kes Add code to tell the OS that we no longer need a cached
551 file that we were reading. In findlib/bfile.c. Also,
552 only cache files that we are reading. Thanks to
553 Tobias Oetiker <tobi@oetiker.ch> for the idea.
554 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
555 kes Implement script to automatically generate cats and dll .def
557 kes Update README.mingw32 to include new .def file generation.
558 kes Correct typo in UTF-8 error message as reported by:
559 jhernandez <julianhernandez@gmail.com>
560 kes Add additional sm_check() code on debug level 1.
561 kes Set default debug level to 1.
562 kes Trap SIGABRT in attempt to get traceback.
564 kes Reduce bat connect timeout from 30 to 15 seconds.
565 kes More restructuring and implementing BSOCK class in place of
567 kes Remove a few unnecessary malloc() tests in crypto code.
568 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
569 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
570 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
572 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
574 kes Fix Verify InitCatalog. The attributes were not pointing to the
575 correct saved location.
576 kes Implement message callback so that GUI is sure to get all
577 daemon messages. Currently displayed in a dialog in bat.
578 kes Ignore SIGUSR2 (Bacula timer) in bat.
579 kes Apply regress patch from bug #859 to allow regress to work
580 with Solaris compiler.
582 kes Begin adding TLS support to bat.
583 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
584 clean up lex.c and make it more readable.
586 kes Move more bnet functions into the BSOCK class.
587 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
588 kes Complete change of berrno strerror() method to bstrerror()
592 kes Cleanup incorrect email addresses in bsmtp.
593 kes Make bat display initial messages rather than discard them.
595 kes First cut of adding .mod to the run command.
596 kes Implement auto display of messages in bat.
597 kes Enhanced preferences to allow all Bacula output to be
600 kes Try to make bsmtp date routines more generic.
601 kes Fixed bug #856 autochanger documentation.
602 kes Rework bsmtp date editing for Win32. This fixes bug #854.
603 kes Add new cats entry point so Win32 builds.
605 kes Attempt to fix bsmtp date editing on OSes without %z editing.
607 kes Do better checking for the MySQL 64 bit libraries looking for both
608 .a and .so libraries.
609 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
610 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
611 kes Require the thread safe version of MySQL during configure. Thanks
612 to Andre Noll for pointing this out.
613 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
614 continuing in migration code.
615 kes Apply implementation of tray-monitor font derived from gnome-console
616 submitted by Andreas Piesk <a.piesk@gmx.net>
618 kes Eliminate important memory loss in SQLite
619 kes Fixed the batch insert MySQL thread specific data that was not
620 being freed. See cats/mysql.c:db_thread_cleanup().
621 kes Fix restore before command.
622 kes Convert old hdr.name to name() in a few places.
623 kes Implement update jobid command.
624 kes Return all time_t dates in db_get_job_record()
625 kes Stop watchdog in SD earlier.
626 kes Put Pool just after Storage in please mount message.
627 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
630 kes Update the po files.
631 kes Fix Verify InitCatalog by making it cache attributes.
633 kes Change name bacula-bat to bat for man 1 page to correspond to
635 kes Check for client and store NULL pointers in status command. This
637 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
638 kes Fix sign extended editing of %p.
639 kes Clean out a little old #ifdefing in cats/mysql.c
641 kes If time diff between DIR and FD is more than 600 seconds convert
642 INFO message to WARNING.
643 kes Implement heap size display in status for all daemons.
644 kes Attempt to fix MySQL db open memory loss (not successfull).
645 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
646 kes Eliminate memory loss in MySQL (possibly other SQLs) during
647 Query. This looks like a MySQL but but by doing extra releases,
648 the memory goes away. This should fix bug #847.
650 kes When backup fails, cancel SD before waiting for sd termination.
651 kes If SD is waiting for FD to connect during cancel, wake up the
653 kes Fix fsf code so that errno is correctly reported.
654 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
656 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
657 so that Bacula doesn't later stumble into a seg fault.
658 kes Use the term Restore Client in the restore Job report.
659 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
660 the original job's FileSetId.
661 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
662 spooling in migration jobs. Not yet tested.
663 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
664 reading conf file from a pipe. However, do it with open_bpipe()
665 rather than popen. Not yet tested.
667 kes Fix an ugly bug where the VolCatBytes were getting updated
669 kes Implement bconsole memory command that prints current memory
670 usage, plus smartalloc dump.
671 kes Clarify some error messages in backup, admin, and migrate.
672 kes Shrink label dialog to smaller size.
673 kes Invert Cancel OK buttons on restore to be OK Cancel.
674 kes More strerror() to bstrerror() conversions.
676 kes Start implementing bstrerror() in place of strerror().
677 kes Stripping path -- seems to work.
679 kes Prevent door and port files from being restored (mostly
681 kes Free an unreleased buffer in compat code.
682 kes Change console Job name from *Console* to -Console- to eliminate
683 Win32 filename problems. Put Win32 path separator when creating
684 Console file. This fixes bug #846.
685 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
687 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
689 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
690 to force Win32 error message.
692 kes First cut strip path. The data should be passed to the FD,
693 but nothing is done with it yet.
694 kes Enhance the digest and signature routines in the crypto
695 library to accept a JCR and to use it to print error messages
696 so that they will go in the Job report rather than the daemon's
698 kes Simplify some of the verify signature code.
699 kes Simplify a few of the alternative returns in the signature
702 ebl Use only POSIX regex instead of GNU regex in breg.c for
703 File relocation. It fix broken freebsd compilation.
704 kes Convert all other Dir files to use new ua class message
706 kes Tentative fix for missing digest signature in bug 807.
707 kes Correct handle problem in new win32_ftruncate routine.
708 kes Convert ua_purge.c and ua_update.c to use new ua class
709 message routines for bat.
711 kes Correct incorrect installation of LICENSE in Win32 installer.
712 kes Display LICENSE at the beginning of the Win32 install.
713 kes Attempt to correct the need for the png files to be installed
715 kes Reapply my bat.conf install script in qt-console. I think I
716 editted bat.pro instead of bat.pro.in and it was lost.
717 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
718 the /var/lock/subsys for subsysdir. Also corrects typos in the
721 kes First cut update job.
722 kes Correct configure to include qmake of src/qt-console directory.
724 kes Make restore job yes/mod/no print in one command so GUI works.
725 kes First cut implementing backup and restore client.
726 kes Correct editing in Verify output that caused a seg fault.
728 kes Insure that bat.conf is not overwritten during installation.
729 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
730 while I was implementing migration in March 2006 !
732 ebl Cleanup file relocation, using char *RegexWhere instead of
733 char *where + bool where_use_regexp
734 kes Update some manpages and add bat manpage.
735 kes Make a first cut at converting bacula.spec.in for bwx-console
737 kes Apply patch from John Goerzen to add hostname as fourth argument
738 to make_catalog_backup script.
739 kes Fix typos I introduced into bsmtp.c
740 kes Make pm_strxxx() routines handle input of NULL pointer. This
741 is to protect from NULL pointers returned from SQL databases.
742 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
743 kes Add more debug to FIFO code -- fix fifo regression test.
745 kes Implement posix_fadvise in FD, and for reading spool files in SD.
746 kes Add thread timer to bnet_connect() to break from OS if wait time
749 kes Update Win32 build to include new files, new symbols, and
751 kes Implement socket level heartbeat (tcp_keepidle)
752 ebl Commit File relocation patch
753 kes Make bat have 'make install' target.
754 kes Warn during install if old gnome-console binary found.
755 kes Warn during install if old wx-console binary found.
756 kes Add -8 option to bsmtp command line to add content type utf-8.
757 Fixes bug #809. (Character coding problem in bsmtp).
758 kes If < is found in target (from, to, cc) then do not enclose the
759 target in < > in bsmtp. Fixes bug #772 (malformed address).
760 kes When printing certain items in dbcheck, stop after 300000.
761 Fixes bug #822. (dbcheck loops).
762 kes Incorrect status in Dir after waiting for mount with poll set.
765 kes Extend idea of Prefer Mounted Volumes to mean a volume about
767 kes Print waiting to reserve a device every 5 mins.
769 kes Don't call close_part in label.c if tape and relabel.
770 kes Don't free volume if busy in close() -- should help with
772 ebl Fix #824 RunScript bug (After script could be execute twice)
773 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
774 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
775 Add a regression script to test RunScript
777 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
780 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
781 deprecated. No additional bugs will be fixed, and they will be dropped
782 in a future release (probably 2.4.0).
783 kes Change name of wx-console to bwx-console to make it more Bacula
785 kes Change the name of gnome-console to bgnome-console to make it
788 kes Some time in March, a Feature Request with patch from Jorj Bauer
789 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
791 The ability for the director to validate a Client (FD) CN against
792 an arbitrary set of patterns rather than the hostname, with
793 A new 'TLS Allowed CN' set of directives which are implemented
794 in the Client resource. Then pattern matching is used in place
795 of hostname matching against the Certificate's CN. As an example, we
796 have certificates which (a) use a local CA, and (b) have a CN of the
798 kes Add new/changed entry points to Win32 build
799 kes Create unaccepted-projects for projects that are not accepted.
800 kes Simplify locking in the reservations system.
801 kes Add more debug code in reservations.
802 kes Make sure error condition on reserving a volume is handled correctly.
803 kes Correct handling of volume_in_use.
804 kes Correct handling of initializing a device.
805 kes Move handling of broadcasting releasing a device into release_device().
806 kes Correct attaching dcr to dev so that it is only done if device
807 is properly initiated.
809 kes Locking debug level tweaks in SD.
810 kes Tweak new Volume code.
812 kes Add exec external-command [wait-seconds] to bconsole. This
813 executes the external-command. Note! normally external-command
814 should be enclosed in double quotes.
815 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
816 it should normally be off in a production system.
818 kes Implement die command for SD so that we can force it to dump.
819 kes Implement SD lock debug code.
820 kes Implement new algorithm for keeping Volume list in SD. It
821 is now owned by the device.
823 kes Implement new code for freeing in use volumes that should
824 resolve if not all, some of the problems of multiple drive
825 tape conflicts described in bug 801.
827 kes Fix gui/bacula-web/images files in svn.
828 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
830 ebl Fix a bug in batch mode (in string escape)
831 kes Correct migration prune SQL typo that crept in in a
834 kes Move bnet_despool() into class in bsock.c
835 kes Modify job report to include director name and Build OS.
836 kes Move drop root privilege and check_catalog() before fork.
837 kes Add update database scripts (version 9 to 10) to updatedb directory.
839 ebl Check size and age of each file after its backup to see if
840 it has changed during backup, if 'checkfilechanges' is set.
841 The FD will do an extra check (stat(2)) after
842 each file backup. mtime, ctime and size are compared with
843 'before backup' information. If time or size mismatch, an
844 error message will be generated. You must upgrade FD to use it.
846 kes Make database name and user configurable
847 --with-db-name=xxx --with-db-user=xxx
848 kes Add back database type to message.c for debugging.
850 kes Implement dir_sql() which issues an SQL query.
851 kes Modify bat medialist to use dir_sql() and do some minor C++
852 formatting as well as eliminating a number of pointers, simplifing
855 kes Fix some of the mtx-changer grep commands for tape label readers.
856 kes Convert a number of bsendmsg into the appropriate send/warning/error
858 kes Suppress the using database message in the .sql command.
859 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
861 kes Add context menu for floating a window.
862 kes Some minor cleanup and name changes in qt-console
863 kes Add doing mt setblk 0 in Win32 mtx-changer.
864 kes Apply Martin's bug fix to move definition of ENODATA for
866 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
869 kes More pruning cleanup.
870 kes Turn on wait_for_drive by default in mtx-changer.
871 kes Turn on Batch insert code by default as it now passes regression.
872 kes Add ./configure --enable-bat to enable building of Bat.
873 No install yet though.
875 kes Implement a new .sql command for bat.
876 kes Implement code to turn off pruning in obtaining the next volume.
877 Pruning is turned off for the status dir command, but turned on
878 for SD requests and for the list nextvolume command.
880 kes Correct Qmsg() that was not updated correctly when committing a
881 previous change (probably the recent TLS patch).
883 kes Write new subroutine is_volume_purged() that explicitly checks
884 if the Volume is purged, and if so marks it as such. This should
885 resolve problems reported about needing to mount twice to recycle
887 kes Rewrite pruning algorithm to do more work in the SQL engine, and
888 to pass a list of JobIds to be deleted to SQL. Also, minimize the
889 amount of duplicated code.
890 kes Do volume pruning only for the Media Type desired (reduces pruning time
891 if multiple Media Types are in the same pool).
892 kes Implement more detailed info in the Job report for the Bacula version
894 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
896 ebl Add bbatch tool to bench database and insert mode.
897 Fix sql quote stuff in batch mode
898 Fix sql stuff for mysql
900 kes Correct problems with am/pm scheduling. Fixes bug #808.
901 kes Implement new prunning code that prunes up to 1000 jobs at
902 the same time. The same technique can be applied to a number
903 of other prune/purge subroutines.
904 kes Add an insanity check when starting a new tape job to ensure
905 that the tape position has not been changed. If so fail the
907 kes Fix Win32 build for dlls to add the folllowing:
908 src/lib/bsock.c -- new file with new entry points
909 src/lib/dlist.c -- new entry points
910 src/cats/sql_create.c -- new entry point
911 src/cats/sql_cmds.c -- new DATA item exported
913 ebl batch mode cleanup bscan-test is ok now.
914 kes Implement SD code to check length of disk volume before appending.
916 kes Correct return status on db_batch... routines.
917 kes Add call to db_write_batch_file_records() to migration code.
918 ebl Fix AfterJob timing
919 kes Move the checking of the database in initializion of the Director
920 to after we drop privileges. This avoids the need for both root
921 and bacula access to the DB.
922 kes Correct a misplaced variable definition in src/filed/backup.c
923 kes Correct how the new batch insert db_create_attributes_record()
924 uses the arguments. Caused a seg fault in bscan.
925 kes Implement lock() and unlock() methods in DEVICE class.
926 Implement block() and set_block(xx) methods in DEVICE class.
927 kes Modify bnet_connect() so that it uses time() to check for the
928 wait time expiring (on some OSes, some system calls may not
930 kes Modify Verify to obtain the previous JobId when it is actually
931 running rather than at schedule time (as it was in 1.38.x).
932 kes Fix src/job.c to handle MaxWaitTime correctly. This should
934 kes When checking pid in pid file, continue running if the pid is
935 the same as ours. This occurs on IRIX after a system crash.
938 kes Extend new GUI API.
939 kes Make the ua structure a class, and implement send_msg(),
940 error_msg(), warning_msg(), and info_msg().
942 kes Apply fix from for building wx-console on the Mac from
944 kes Implement new select mechanism for GUI programs.
945 kes Reorganize initialization of stackedWidgets in bat.
947 kes Add updated nagios plugin supplied by Christian Masopust.
949 kes More bat implementation.
950 kes File migrate bug with Pool Occupancy using mediaid instead
951 of jobids. Fixes bug #795.
952 kes Fix orphaned buffers in filed backup and verify due to
953 crypto buffers not freed during errors. Fixes bug #789.
954 kes Extend new GUI api code to tree commands.
955 kes Ensure that tree and dot commands check console ACLs.
956 kes Permit marking directory with trailing slash.
957 kes Allow 20 console connections (instead of only 10).
959 kes Add smartctl call to bacula-sd.conf as an example of getting
962 kes Modify jobq.c to let simultaneous restore jobs run. This may
963 cause them to fail if they cannot get a drive.
964 kes Add Client Connect Wait to Storage daemon to permit users to
965 modify the time the SD waits for a FD connection.
967 kes Correct virtual changer check which was backwards. This caused
968 volumes to be unloaded into slots already occupied.
970 kes Apply Command ACL filter to JobId list in restore command.
971 kes Correct typeo in var.c patch.
973 kes Don't let Bacula prune File or Job records for the current Job.
974 kes Fix variable substitution pad + inc bug reported (with patch)
977 kes Correct SQLite log table index as reported by Luca Berra.
979 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
981 kes Begin implementing new comm signals for API.
982 kes Fix a few places in lib/message.c where the open fd may
984 kes Continue implementing lib/bsock.c (real class). Make jcr,
985 who, host, and port private. There are new methods to access
986 them for non-class use. This required touching a number of files.
988 kes Add LANG=C to autoconf/randpass so it works with languages other
989 than English. Fixes bug #788.
991 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
993 You will not be able to generate Include/Exclude list any more.
994 It will be fixed soon.
995 If you want to use this, you can apply
996 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
998 kes Restore of sockets created false error messages because Bacula
999 no longer restores sockets, but the code was still trying to
1000 set the attributes on a non-existent file. Reported by a user.
1001 ebl finish RecyclePool feature
1002 Media will takes Pool.RecyclePool
1003 when moving from Scratch to a Pool or when user will do
1004 update volume=xxx frompool
1005 To use it, add RecyclePool = aPool to your Pool resource
1008 RecyclePool = Scratch
1012 kes Expand new BSOCK class adding signal() and new BNET signals.
1013 kes Begin enhancing the dot commands adding a new API function
1014 that returns more information and will make it easier
1015 to interface to the Director from a program.
1017 kes Make DEVICE fd private. Its new name is m_fd, and can be
1018 obtained with dev->fd() outside the class. This is the
1019 first of many DEVICE members to be made private.
1020 kes Implement Michael Renner's idea on having a virtual disk
1021 changer. I made some minor modifications (e.g. I did not
1022 implement the Virtual Changer directive, but simply set
1023 the Changer Command to an empty string.
1025 kes Implement a BSOCK send() method that writes the whole record
1026 in a single write() request rather than in two.
1027 ebl add update volume=xxx recyclepool=yyyy
1028 volume takes recyclepool from pool when using update volume=xxx from pool
1030 kes Fix encryption deblocking bug, which caused some restored files
1031 to be truncated. This fixes bug #763.
1032 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1033 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1035 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1036 ebl Use btime_t instead of uint64_t in media patch.
1038 kes Optimize the use of the database a bit in the Status dir command.
1039 Only open it when needed, ensure that if any previous database
1040 was opened, it is closed.
1042 kes Correct VolCatBytes bug from media patch.
1043 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1044 in the case of orphaned records.
1045 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1046 and File records in 300K chunks to be more efficient. This
1047 idea came from Juan Luis Frances (if I remember right).
1048 kes Apply Eric's scratch patch that moves a purged Volume to
1049 the RecyclePool. Question: how is RecyclePool set? what
1050 happens to the ScratchPool?
1051 kes Apply Eric's media patch that collects read/write media
1052 times as well as byte counts. This patch requires a
1053 simultaneous upgrade of the DIR and SD. Note, there
1054 should be some way to turn off timing. I'm not sure
1055 times are in Bacula units.
1056 kes Apply Eric's batch-insert patch.
1058 kes Update projects list.
1060 kes Implement Include/Exclude file lists in FD as dlists using
1061 the new dlistString class. This permits efficiently having
1062 large include/exclude lists and completes project Item 25.
1063 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1064 console is authorized to cancel the job. This fixes bug
1066 kes Modify SD so that the VolCatJobs medium record is updated
1067 at the beginning of a Job rather than the end. This
1068 fixes bug #775 where exceeding MaxVolJobs caused jobs
1070 kes Added a mutex around getting and setting Volume information
1071 so that multiple simultaneous jobs will single thread.
1073 Switch to using Subversion
1074 kes Remove src/pygtk-console/ from configure
1076 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1077 plus the entrypoints.
1078 kes Apply patch supplied that corrects debug print
1079 in canceling jobs for max run time. Supplied as
1080 part of bug #621, which was previously fixed.
1082 kes Test on job_canceled() and sd_msg_thread_done inside
1083 loop starting the message thread to avoid a race condition.
1085 kes Remove rl_catch_signal from console.c as it conflicted
1086 with the header definition. Fixes bug #765.
1087 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1089 kes Clarify some stored/acquire messages to indicate if the
1090 problem is with read or append.
1092 kes Fix memory leak with storage ids in cats/sql_get.c
1093 kes Terminate watchdog earlier to avoid reference to released
1094 memory -- reported by Jason Austin.
1095 kes Move closing the database from jobq.c to the director daemon
1096 termination routine. This fixes memory leaks for shadow jobs
1097 (i.e. migration jobs).
1098 kes Free up the unique jobid chain items in migrate.c. This fixes
1099 a memory leak problem.
1100 kes Convert some ugly looking for statements to use foreach_alist
1101 in findlib/find.c. This will facilitate converting the structures
1102 to use dlist (for large include/exclude lists).
1103 kes Fix a bug in the btree.c and btree.h routines, then rename them
1104 rblist and add them to be built in src/lib. Include some new
1105 methods written by Rudolf Cejka that make the code more readable
1106 (hides some of the ugly casting).
1107 kes Add set_next() and set_prev() methods which make the code much more
1108 readable. Also add a new dlistString class that facilitates storing
1109 strings in dlists. To be used in the large include/exclude lists.
1110 kes Make some trivial modifications to lib/tree.h that use rblist
1111 rather than dlist for storing the tree links. This was suggested
1112 by Rudolf Cejka. The result of this is that the restore tree now
1113 uses red-black binary trees rather than simple linked lists. This
1114 should give rather dramatic speed improvements for directories
1115 contining large numbers of directories/files (more than 10000).
1117 kes Fix maxruntime bug #621.
1119 ebl Implement the include JobID in spool file name project.
1120 kes Reorder projects file in order determined by Jan 2007 vote.
1121 kes Implement item #12 on project list -- quick release of FD by
1123 kes Fix open of SQLite3 db where user does not have write permission
1124 so that DIR does not crash. Fixes bug #761.
1126 kes Add back missing @ in Win32 Makefile.
1127 kes Change 'Device not configured to autolabel' from INFO
1129 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1130 which should restart an indefinite # of times.
1131 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1132 other DIR specifications.
1134 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1135 Fix path quoting in SQLite scripts.
1136 Fix problems with SHGetFolderPath.
1138 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1140 kes Fix Job restart on error bug that promotes an Inc to a Full
1141 backup. This should fix bug #755.
1142 kes Add qt-console and first cut of code.
1146 kes Fix Bacula->Documentation link on Win32 to point to index.html
1147 instead of bacula.html. Fixed bug #750.
1148 kes Return JobId in db_get_job_record() when JobId==0. This should
1150 kes Do not release source pointers when restarting a failed job.
1152 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1153 This *should* fix bug #747.
1154 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1157 kes Modify USTORE constructor to set an empty store_source string,
1158 and don't copy the store_source string in a cancel. Hopefully
1159 this will fix Arno's seg fault, bug #744.
1160 kes Add back code to disable conio in configure. Fixes bug #743.
1161 kes Correct the Options scanner in the FD to correctly handle
1162 SHA1 option, which was eating the next option. Reported by
1164 kes Add code to indicate when the SD is spooling, spool wait, and
1165 despooling as requested by Alan Brown.
1167 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob