1 Technical notes on version 2.3
5 kes Don't zap dcr values during release_volume() as they might
6 have the next Volume to be mounted.
9 kes Second cut of drive switching during backup.
12 kes Update Win32 version of wxWidgets to most recent version.
13 kes Tweak Copy job details.
14 kes Rework dir_find_next_appendable_volume to make a bit more effort
15 to find a suitable volume before giving up.
17 kes Make ask_sysop_to_create... to return if waken from wait.
18 This helps get out of blocked conditions.
19 kes Experimental implementation of switch_device in reservations.
20 kes Implement FD version to allow easier protocol changes.
21 kes Add Plugin Options string -- not yet passed to FD.
22 kes Implement PluginOptions ACL.
24 kes Attempt to correct problems with restores with autochangers and
25 use counts going negative
26 kes Rework SD status command and implement API for bat. Implements
27 header, runing waitreservation, devices, volumes, spooling,
28 and terminated status keywords.
29 .status storage=xxx <keyword>
30 kes Clarify TLS error message by adding double quotes around name.
31 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
32 kes Pass jcr to tls routines so debug messages can be handled better.
33 kes Rework jobq resource allocation code, and possibly fix a bug
34 that caused reference counts to get out of sync.
36 kes Rename fd/dir plugin to use Bacula standard underscore.
37 kes Plugin work -- bring dir up to fd level.
38 kes Start implementation of VTL code
39 kes Fix Win32 build after adding new cats subroutine.
41 kes First cut at Duplicate Job implementation.
43 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
44 kes Start PluginOptions string, and refactor a bit of ua_run.c
45 ebl Apply Allan patch that permit to reset recyclepool.
47 kes Test patch -- possible fix or improvement for bug #1053
48 kes Refactor FD and SD status commands to permit new API code in
49 SD, and to fix Win32 build.
50 kes Win32 build is now working.
52 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
53 some ideas in patch from Scott Bailey.
54 kes Begin implementation of duplicate Job control.
55 kes Fix some of Win32 build after recent additions.
56 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
57 which causes the FD to detect whether or not the OS has the
58 honor no dump bit (*BSD systems), and if so, to skip backing up
59 any file with this bit set. The feature is enabled by setting
60 'honor no dump flag = yes' in the Options section of a FileSet.
62 kes Correct po warning message with datarootdir
63 kes Implement more code in dird.c to put configuration parsing in
64 a class rather than use globals.
65 kes Restructure SD status command for implementation of bat API
68 kes Suppress incorrect 'Will not descend from x into y' messages.
69 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
70 daemon globals used by parser.
71 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
73 kes Fix free of plugin_list when none exists.
75 ebl Apply accurate project patch.
77 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
78 on non-mempool object)
79 kes First cut of converting FD .status to work with bat API.
81 .status client=XXX header
82 .status client=XXX running
83 .status client=XXX terminated
84 kes Implement first cut of Copy Job.
85 kes Implement Catalog in Pool resource. It overrides catalog specified
86 in the Client resource.
88 kes Apply patch (with some difficulties) from Joao Henrique Freitas
89 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
91 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
92 ftruncate() actually works. In the case of some (cheap) NAS devices,
93 it does not, and so recycling NAS Volumes does not work. The code
94 simply unlink()s the file, then recreates it. This fixes bug #1011.
96 kes First incomplete cut of big malloc blocks for htable.
97 kes Tweak plugin code.
99 kes Plugin debug code + tweak a couple bat dialog layouts
101 kes Fix creating first JobMedia record during Migration to include
102 proper index. This caused slow restores of migrated jobs.
103 kes Temp fix to plugin name file_index.
104 kes Bacula backed up and restored a MySQL database.
106 kes Implement plugin restore.
107 kes Implement parsing of db_driver to give db_type index.
109 kes First cut of plugin restore code.
110 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
111 and do not strip paths on symbolic links.
112 kes Set catalog backup database and user name from values specified on
113 the ./configure line.
114 ebl Fix #1031 about wrong pool source information in job report.
117 kes Remove a redundant jcr argument to find_files, match_files, and
119 kes Implement '.status dir header|scheduled|running|terminated' that
120 prints the requested status section. With the exception of the
121 header, the other reports have fields separated by tabs (\t).
123 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
124 a resource embedded run command to find a since time if no explicit
125 since time was supplied on the command line.
126 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
127 that updates the state file at job termination time in addition to
128 when the daemon terminates.
130 kes First version where a plugin did a backup.
131 bpipe-fd.so created a backup file, wrote a test
132 string to it, and Bacua could restore this fabricated file.
134 kes Implement DB Driver = string for the DBI driver.
135 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
136 kes First cut of code for loading Win32 plugin dlls. Implement
137 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
138 and implement a dlfcn.h file based on opengroup's definitions of
141 kes First cut plugin directives.
143 kes Apply patch from bug #1049 to prevent stripping the path on a
145 kes Attempt to fix bug #1047 where stripping a path corrupts the
146 heap. Waiting for feedback.
147 kes Correct the Mount message not to suggest labeling a new tape
148 when doing a restore. Submitted by email by John Stoffel.
149 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
150 FD by using casting. Reported in bug #1042.
152 kes A bit of crypto cleanup. More later.
154 Release Version 2.2.8
156 kes Apply patch from Martin to correct bug #1040, bscan sets existing
158 kes Fixed important spelling error in doc -- bug #1045.
160 ebl Fix bextract to be able to extract non-portable Win32 data to
162 kes Move initialization of read/write res lock earlier in the code.
163 This fixes the crash with a null conf file. This fixes bug
165 kes Redefine CURES in lib/parse_conf to be URES and move it all
166 into lib/parse_conf.c -- this responds to bug #1042, but does
167 not fix it. The fix is not to compile with FORTIFY_SOURCE.
168 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
169 the trunk SVN. I don't think this was reported as a bug.
171 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
173 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
175 kes Add DataDespooling and DataCommitting status (committing is
176 the last despooling).
177 kes Finish implementation of new reservations code noted below.
179 kes Fix bsnprintf for float point numbers. I broke recently when
180 parameterizing some variables. This fixes bug #1036.
181 kes Undo recent reservations changes ... will apply them later
182 when they work better.
184 ebl Fixes #1034 which cause mysql to hang the connection after 8h
185 ebl Change default statistics target of filename.name and path.path
186 fields for PostgreSQL. This speeds lookup by indexes. Thanks
188 kes A few more tweaks to new reservation code. Make sure to clear
189 vol released flag when retaking volume. When reading label and
190 label is bad mark volume unused. When recycling, mark volume
191 unused so it can be renamed.
193 kes Fix reserve_volume() so it doesn't release a volume in use
194 (i.e. a volume entry not marked released). This should be
195 the last part needed to fix bug #1018.
197 kes Move Heartbeat documentation from Job to Director resource.
198 This fixes bug #1033.
200 kes Fix existing switch drive SD code to call autochanger to release
201 any old volume. This must be done to keep the autochanger from
202 releasing subsequently newly reserved volumes in doing a close().
203 This should fix bug #1018.
204 kes Fail if attempting to get console input in batch mode. This
205 should help fail RunScript console commands that are incomplete.
206 kes First cut implementing switch_drive() in SD (not actually called).
208 kes Implement first cut running console commands in a RunScript.
210 ebl Fixes bug #1028 where 'Selection Type' option was not usable
212 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
215 Release Version 2.2.7
217 kes Add new free_tls() entry point so that Win32 builds.
218 kes Fix compile warning in src/lib/util.c
219 kes Fix entry point for edit_job_codes() so that Win32 builds.
220 kes Fix seg fault Frank Sweetser reports in regression testing
221 on his systems. The problem was that the original author of
222 bsnprintf.c did not take into account the side effects of
223 using ++x in the argument to a #define.
224 kes Make SD protocol backward compatible with version 2.2.x.
226 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
227 because Bacula no longer restores sockets.
228 ebl Always use ignorecase fileset option on win32 FD.
230 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
231 that implements double quoting include names in conf files,
232 and also allows piping input by having the first character
233 be a vertical bar (|).
234 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
235 that implement %f in RunScripts to pass the FileSet name.
236 kes Skip leading | when lex input comes from a pipe as suggested
237 by Michael Stapelberg <michael@stapelberg.de>.
239 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
240 Nerijus Baliunas <nerijus@users.sourceforge.net>
242 kes Implement Plugin Directory and plugin events.
244 kes Implement a security enhancement: TLS authentication but no
245 encryption. Enabled by setting 'TLS Authentication = yes'.
246 Note when this is on, TLS encryption is turned OFF!
248 kes This patch corrects a problem where the maximum concurrent storage
249 jobs counter gets out of sync during restore jobs causing jobs to
250 'wait on max Storage jobs'. This patch fixes bug #1009.
252 kes This patch fixes bcopy so that it produces correct Volumes.
254 kes This patch eliminates spurious output to the console during a VerifyVolume
255 job that contains encrypted data. It fixes bug #1024.
257 kes This patch prevents the 'status dir' command from trying to use a scratch
258 volume and possibly moving it from one pool to another. This patch fixes
261 kes Add new include to postgresql.c suggested by Marc Cousins so
262 that it compiles correctly with pgre version 8.3.
264 kes Fix --archivedir addition to configure. Replace it with
265 --with-archivedir in configure.in This fixes the regression
267 kes This patch fixes bug #1012 where the job is canceled because
268 of Max Run Time exceeded when the job has not yet started.
270 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
271 one 'part' to write. Instead of each part being stored on disk,
272 written to DVD, then deleted from disk, all parts are written to disk,
273 and only the last is written and deleted from disk.
274 kes This patch fixes the status command to include the formating string for
275 JS_AttrInsterting. It fixes bug #1021.
276 kes This patch should fix the Mac OS X build problem on the latest
277 Darwin, where sys/types.h was not included correctly (apparently
278 due to a change in the Mac headers). The solution was to explicitly
279 ensure that it is defined for the ./configure.
280 This patch also has a rebuild of configure that includes the Debian
281 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
282 kes This patch should ensure that queued messages to the console are
283 displayed as soon as possible. It should fix bug 1007, but has been
284 reported not to work.
286 kes This patch fixes the infinite loop when trying to increase the
287 maximum number of volumes in a Pool during the add command.
288 This patch fixes bug #1008.
290 Release Version 2.2.6
292 db Remove extra data on estimate command in joblist for bat.
294 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
295 really change anything, but is the beginning of doing it *right*.
296 To do it completely right the LastWritten date must be passed to
297 the SD, but it is not yet done.
298 kes Minor tweaks to some bat restore SQL.
299 kes This patch fixes bug #1003 where putting the message output from
300 a Verify job into the catalog results in a recursive loop. The problem
301 seems to show up only with postgresql (to be verified).
302 kes Correct %x to %p in postgresql debug statement.
304 kes Fix bug #942 where lots of emails where generated when the heartbeat
305 interval was low and Bacula wanted a different tape from the one in
308 ebl Add new SD despooling attributes and Dir inserting attributes
309 job status codes in the catalog (Status table).
311 ebl Use qmake-qt4 instead of qmake when available (debian system).
313 kes Add a security warning to src/cats/make_catalog_backup.in indicating
314 that passing the password via the command line (arg 3) is insecure.
315 This responds to bug #990 (it doesn't fix it).
317 kes Set default debug_level to zero. This corrects bugs #991 and #993.
318 kes Fix a crash in bat when it cannot connect to the Director for example
319 if the Director is not running.
320 kes Remove redundant INDEX (JobId) from File table in the trunk.
322 kes Make explicit exception to GPL in LICENSE to permit linking
323 the Win32 FD with Microsoft VSS code.
324 kes Apply the Solaris package patch from
325 Masopust, Christian <christian.masopust@siemens.com>
326 kes Apply the patch to optionally add a timestamp in the debug output
327 submitted by Mariusz Czulada <manieq@wp.eu>.
329 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
330 backend (sql_strerror). Fixes bug #989
332 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
333 It applied with no problems.
334 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
336 kes Redirect stderror to stdin on mt status command in mtx-changer.in
337 since the status is returned on stderr on Solaris.
338 kes Activate Close button on tray-monitor window. This fixes
340 kes Check for NULL item in parse_conf.c before calling it. In the
341 case of Device, there is no item and this caused a seg fault when
342 Device appears in the conf file.
343 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
344 avoids pulling in config.h multiple times in some new code.
346 kes Fix spurious warning message printed when creating a volume with
347 a LabelFormat. This fixes bug #976.
349 Release Version 2.2.5
351 kes Add JobId in place of Job name in all the Jmsg() output.
352 kes Correct the APP_DESC for the Win32 storage service (remove an e).
354 kes Make maxvol-test and new more strict maxvol2-test work.
355 kes Print JobId in all Jmsg() job output.
357 kes Add new SD despooling attributes and Dir inserting attributes
358 job status codes. This fixes bug 961.
359 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
361 kes Fix doc issue. This fixes bug #963.
362 kes Fix listing performance problems in bat. Pointed out by
364 kes Remove old debug code.
365 kes Fix bat code that tests for Win32. This should fix bug #968
366 kes Query 5 list wrong Vol after migration. This fixes bug #960
368 ebl Fix #969 where user can't change Replace option in restore menu.
370 kes Save jcr in thread specific data (tsd) for each thread.
371 kes Make Dmsg() print JobId as -%u.
372 kes Make Jmsg, Emsg, and others automatically pickup the jobid
373 for the thread if it exists.
374 kes Remove old reservation debug jid code.
375 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
376 ebl Add an option that permit to specify spool size in job
377 definition. (Applying patches/testing/spoolsize_per_job.patch).
378 You must upgrade SD and DIR at the same time.
379 dvl Add new configuration item --archivedir
380 dvl Adjust regression tests to use tmp not /tmp. This will allow
381 multiple concurrent runs of the regression tests.
383 kes Fix race condition that drops final block written to volume.
384 This happens in rare cases with multiple simultaneous jobs
385 when the Volume fills. This fixes bug #964. May be related
386 to bug #935 and possibly #903.
387 kes Eliminate more strerror() and replace with bstrerror().
388 kes Remove BSD getopt and replace with unrestricted IBM version.
389 kes Fix Win32 build for changed calling sequences.
390 kes More tweaks to the mount volume routines to get everything
391 right. Changed variable name from find to have_vol, which is
392 much easier to understand.
393 kes Enhance btimer debug code.
395 kes Fix FD->SD authorization failure, which was due to spurious
396 wakeups from a pthread_cond_timedwait(). Simply check the
397 predicate before continuing. This fixes bug #953.
398 kes Add const char where needed (more to do). Remove temp debug code.
400 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
401 kes Don't overwrite error message in check_tables_version.
403 kes Unlock batch insert tables with same calls used elsewhere.
404 kes Allow starting 59 jobs a second.
405 kes Make SD session key more random.
406 kes Add retry for SQLite opening db if it fails. Probably helps
408 kes Suppress extra error messages during batch insert failure.
410 kes Add jcr to timer packets so if killed message can be sent to job.
411 kes Add JobId to all Dmsg() output.
412 kes Put some FD auth code on dbglvl rather than fixed.
413 kes Return insert attributes error message in db msg buffer to avoid
414 false error messages. Helps fix bug #966.
415 kes Separate batch init error messages. Probably helps fix bug #966.
416 kes Make SD code that contructs attribute insert check string lengths
418 kes If Dir gets an error during inserting attributes, cancel SD.
419 This reduces unnecessary error messages.
421 kes Correct search boolean for getting Volume info
422 ebl Cleanup batch insert code. Probably fixes bug #965.
423 kes Back out one small change to the reservation system (reserving a volume).
424 kes Rework how a Volume is mounted. It is now much more intelligent and
425 will always attempt to use any mounted volume if possible and reduces
426 calls to the Director asking about volumes.
428 kes Turn off some code when batch insert not enabled.
429 kes Edit FD name in connect error messages.
430 kes Rework the reservation system to take into account that the Director
431 might give us a Volume that is different from the current one being
432 used, and to ensure that we don't exceed Maximum Volume Jobs.
433 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
434 fatal error with multiple jobs running'
435 kes Add more debug code in reservation system.
436 kes Implement maxvol-test to check bug #947.
438 kes Add code to handle tray monitor separated from Win32 FD.
439 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
441 kes Add missed return in fixing verify bug -- trunk only.
442 ebl Fix a command parser issue causing a director segfault.
443 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
445 kes Increase the max block size to 4MB fixes bug #957.
446 kes ERABT if user sets min block size > max block size. Fixes bug #956.
447 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
448 is not properly mounted (recognized) during a poll.
449 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
450 Job that has differences reports Verify OK.
451 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
453 ebl Add an option to operate on all pools with update vol parameters.
454 This complete the project 20. Patch from Nigel Stepp.
455 ebl Add history support to bconsole when using readline.
456 Using Ctrl-D to exit doesn't update .bconsole_history
457 kes Modify new volume algorithm to use max MediaId for generating next
458 volume number rather than the count of Volumes. This should essentially
459 eliminate the failure rate if some volumes were deleted. Bug #921.
460 kes Begin implemention of Optimize Job Scheduling.
461 kes Implement restore callback that Dirk and I agreed on for bat
462 restore. This fixes bug #928. Restore of backup of zero files fails.
463 kes Fix SQL Catalog logging which broke with new db_escape_string
466 Release Version 2.2.4
468 kes Fix bacula_cats.def for new db_escape_string().
469 kes Increase size of name string when FD making connection to SD.
470 May fix bug #953. FD->SD connection failure.
472 kes Add code to help Dan debug 2drive-incremental-2disk test.
473 kes Add code to try to fix bug #908.
474 kes Add waits to multiple exit detection code to try to force pid
475 file to always be deleted.
476 kes Restore good dev.tar.gz to rescue set appropriate binary property.
478 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
479 trying to switch drives by checking for blocking before unblocking.
481 kes Cancel storage daemon in all cases where FD reports error. This
482 should fix virtually all cases of bug #920.
483 kes Fix db_escape_string() for MySQL which did not compile.
485 kes Fix error message that was clobbered when Dir tells SD it does not
486 have write permission on Volume. This should fix a minor point
487 in bug #942, but not the main problem.
488 kes Add code to cancel job in SD if FD connection fails. This should
490 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
491 dvl Pass jcr and db into db_escape_string() to enable better escaping
493 kes Fix migration code to get correct Volume name with multiple volumes
494 by skipping |. Fixes bug #936.
495 kes Implement patch supplied by Landon to fix bug #944 where using
496 TLS with bconsole uses 99+% of the CPU.
497 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
499 kes Move patches into patches directory.
501 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
504 ebl Using 'm' in bconsole will show messages like before,
505 and not memory usage.
506 kes Fix bug #935, and probably also bug #903 where files were not
507 restored. MediaId was not properly set in JobMedia record after
510 kes Suppress chown and chmod error messages if the FD is not running
513 kes Apply Martin Simmons' patch that should turn off the new API usage
514 when batch insert is turned off allowing building on older
516 kes Add ./configure search in qwt-qt4 for qwt package
518 kes Bacula is now free of 3rd party GPL copyrighted code!
520 kes Add guid_to_name.c/h which replace idcache.
521 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
523 ebl Detect if new PosgreSQL batch insert API is present.
524 kes Correct incorrect mempool call causing Director crash. Occurs on
525 systems without va_copy().
526 sb Update spec files for 2.2.1 release
528 kes Fix memory pool call in ua_output.c. bug #934.
529 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
530 Add test program to fnmatch.c
532 kes Integrate patch to README.vc8 from
533 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
534 edit it to get it into Unix patch format.
535 kes Implement mkpath.c to replace old FSF makepath.c
537 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
539 Release Version 2.2.1
541 kes Update POTFILES.in
542 kes Cleanup a few underquoted AC_DEFUNs in configure
543 kes Apply patch from Martin Simmons that adds a test for va_copy to
546 kes Fix bug #921 by increasing the number of tries to create a new volume
548 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
549 can be called multiple times. Implement a version for machines
550 without va_copy() that gets a big buffer.
552 kes Integrate more portable zone offset code into bsmtp.c
553 Submitted by Attila Fülöp.
555 kes Fix bad SD->FD return status reported by
556 (James Harper) <james.harper@bendigoit.com.au>
557 ebl Fix a bug in read_close_session which return random status
558 thanks to James Harper
560 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
561 and directory names during restore of single file/directories.
562 kes Add sanity checks to .sql command when string is empty. Hopefully
563 that will resolve Dirks Director crash.
565 kes Apply patch submitted by Martin Simmons that corrects a seg fault
566 in the bsmtp chat subroutine when debug is >= 10.
568 kes Fix Director crash when running bat SQL queries.
569 kes Add David's notes on Item 8: Copy pools.
571 kes Rework projects file to be current and ready for a vote.
572 kes Enhance lex scanner error message.
574 kes Tweak LICENSE file to mention BSD code.
575 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
576 if specified on the ./configure.
577 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
578 This class is intended to allow us to open a second bsock to the
579 Director while in the restore subdialog.
581 kes Fix configure to create bat Makefile before creating dependencies.
582 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
583 kes Add a tooltip to the tray monitor.
584 dvl Set the Director's PID file before dropping privs. This fixes
587 kes Update AUTHORs file
588 kes Increase the default max concurrent jobs to 20 in FD and SD to
589 correspond with the default .conf files.
590 kes Rewrite the Win32 service routines. This eliminates the 3 copies
591 some different, of the same file created by RN when porting the
593 kes Rearrange some of the Win32 directories and the placement of the files
595 kes Set DEVELOPER flag in version.h
597 ========================================================================
598 Release Version 2.2.0
600 kes Apply a second doc patch from Marc.
601 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
602 improves the tips section that discusses how to setup multiple
605 kes Update bat README file.
606 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
607 corrects a typo in the Recycle status check in db_find_next_volume().
608 This will probably fix a number of annoying problems with multiple
610 kes Modify most of dird/msgchan.c to use bsock class calls rather than
611 bnet calls -- no functionality change.
613 kes Modify the Verify output to specify if files are missing on
614 the Volume(s) or disk. Fixes confusion in bug #916.
615 kes When more than one Volume is read in a migration job, the last
616 Volume bytes reported are from the last read volume rather than
617 the last written volume. Fixed. This fixes bug #910.
618 kes Fix display of Recycle flag after update volume=foo recycle=yes.
619 It previously printed New Recyle flag is: no. This fixes bug
622 kes Correct seg fault when switching tape drives during restore.
623 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
624 be used until after 2.2.0 release.
626 kes Remove fnmatch() in SD that permitted wild card specifications.
629 kes Fix %g in filename returned by SQL for browse tree reported by
631 kes Fix configure so that it puts config.out in the cwd rather than
633 kes Attempt to fix the locking problem reported by Eric in bug #906.
634 kes Make berrno class to leave errno unchanged after constructor call.
635 kes Make bnet_server use the heap rather than the stack to allocate
636 its socket fd pointers to avoid a crash at termination. Problem
637 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
639 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
640 and putting it in depkgs-qt along with Qt4.3.
642 kes Rework code in acquire.c that switches drives for reading when
643 the Media Type does not match. This should fix bug #906
645 ebl Fix a director segfault during job setup #907
646 kes Correct seg fault in postgresql when first operation returns no
647 rows. Fixes Dirks File browser problem seg fault with bat.
649 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
650 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
653 kes Implement PopUp YES/NO dialog for bat.
655 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
657 kes Correct RunScript to terminate job in FD on failure.
658 kes Change abort_on_error and AbortJobOnError to fail_on_error
659 and FailJobOnError in RunScripts.
660 kes Minor tweaks of code formating in RunScripts, principally to
661 avoid depassing 80 columns.
663 kes Eliminate one #ifdef Win32 in bsmtp
664 kes Implement grow tool to grow a file for testing very large databases.
665 kes Add big-vol-test to test Bacula seeking with > 5GB.
668 kes Modify find_next_volume() to return all values in Media record.
669 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
673 kes Update Release notes
675 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
676 Warning, in previous beta version, all media get from scratch keep their
679 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
680 This should fix bug #842. Made a note to look at removing the temp
681 files at the end of the install.
682 kes Add ability to mount and unmount a file device providing it is
683 marked as being removable and has the appropriate mount and unmount
684 commands defined in the Device resource. This fixes bug #830.
685 kes When applying a storage override, release all previous storage
686 definitions rather than just prepending the new storage.
687 This should prevent a good deal of confusion.
689 kes Implement ./configure search for qwt libraries.
691 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
692 Win32 FD. This should fix bug #893.
693 kes Remove an unnecessary beep in Win32 init code.
694 kes Update copyright dates in Win32 executable about boxes.
695 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
696 code with a BSD getopt.c and getopt.h.
697 kes Remove sched.h from the Win32 compat directory -- not used.
698 kes Remove the Exit menu item from the Win32 tray monitor. If you really
699 need to shut it down, do it through the services panel or the command
701 kes Remove some inappropriate Bacula FSFE copyrights.
702 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
703 kes Fix regress config non-portable test as pointed out by
704 Florian Heigl <florian.heigl@gmail.com>
705 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
706 as pointed out by Florian Heigl <florian.heigl@gmail.com>
708 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
709 Reported by Frank Sweetser.
713 kes Fix client-only build.
714 kes Integrate client-only fixes for bsys (initgroups) and conio from
715 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
716 kes Make arguments to get_scratch_volume() in same order as other
718 kes Rework the prune_volumes() subroutine so that after purging and
719 no volume found in desired pool, it will check for a scratch
720 volume. This prevents recycling the whole scratch pool.
721 kes Add code to status storage to print boffset_t (largefile support).
723 kes Move qwt (Graphics libarary for Qt4) to depkgs.
724 kes You now need a --with-qwt=<dir> to be able to build bat.
725 kes Update src/win32/cats/bacula_cats.def to include the new
726 db_get_query_dbids() call on Win32.
728 kes Correct a problem when selecting a scratch volume and moving
729 it to another pool that lost some columns.
730 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
731 kes Enhance Autochanger error messages to include Volume and device name.
732 kes Rework prune_volumes() code to take account of InChanger flag,
733 and to handle recycling volumes going to the Scratch pool and
734 current pool because the RecyclePool directive.
735 kes Implement a better and more efficient db_get_query_dbids() to
736 handle creating and passing back a list of DBIds.
740 kes Start work on new more efficient DBId subroutine. First use
741 will be for recycling volume to Scratch inchanger.
742 kes Increase number of JobIds in pruning from 1000 to 10000.
743 This to be replaced by above routine.
744 kes Begin implementation of building Qt4 on Win32.
745 kes Correct typo in fix I added for bad TLS shutdown.
746 kes Pull 2.0.3 patches into patches directory.
747 kes Update Release notes. Include qt-console in line count.
748 kes Update Projects file.
750 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
751 bug in migration code where a job that spanned two volumes
754 kes Implement new BST_DESPOOLING blocked state. Change from locking
755 during despooling in SD to blocking. This means that other threads
756 can work with the device structure, in particular the reservations
757 system while despooling.
759 kes Fix return in reservation message queue that missed clearing
760 the jcr lock (implemented 26Jun07 below).
761 kes Rename a number of dev methods to make locking function names
763 kes Document locking in lock.c. Move lock structures to new file
766 kes Move reservations message lock to lock jcr only this
768 kes Move main SD locking code into lock.c (new file).
769 kes Update Win32 build to include lock.c
773 kes Dirk committed the qwt library code for drawing graphs in bat.
774 kes Tweak install of qwt so that it is integrated with ./configure.
776 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
777 out by Eric (my typo).
778 ebl Fix configure.in to get batch mode enable
779 kes Return correct string from authenticate.cpp in bat when connecting
781 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
782 spurious line drops when using TLS.
783 kes Do not file reparse points when restoring a file that already
786 kes Implement Windows reparse points -- similar to directories, but
787 we do not descend into it. This is a first cut. They seem to
788 be backed up, but restore is not yet tested.
789 kes Remove restore_blocking in tls code when shutting a socket to leave
790 it in blocking mode. Hopefully this will fix the encryption bug
791 reported by Frank Sweetser.
792 kes When opening a file for backup, tell the OS that we are going to
793 read it sequentially -- optimization.
794 kes Change variable names in authenticate_director() to not conflict
795 with member names in bat. Caused great confusion with compiler,
798 kes Queue openssl error messages in case of comm problem.
799 kes Do shutdown() call if socket terminated.
800 kes Remove some duplicated code in tls.c
801 kes Move more of the bsock member variables into private and access
803 kes Add Frank Sweetser's tls-test to the regression suite.
805 kes Add Swedish sv.po file
807 kes Don't print clock skew message in FD if less than 3 seconds diff.
808 kes Add a bit of VSS info to status client.
809 kes Implement a first cut of Vista VSS, using Win2003 code.
813 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
814 loaded tape but uses first drive).
815 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
816 This was indeed a Win32 issue.
818 kes Simplify search of autochanger for in-use Volume.
819 kes Fix exit condition of check for in-use volume. kes Remove
820 inappropriate my_postgresql_free_result() in db_close()
822 kes Fix bad return in FD when encryption signature not found.
823 Probably caused a crash.
824 kes Inhibit missing encryption signature error messages for
825 file types where no signature computed.
826 kes Correct inverted check on autochanger in reservation system.
827 kes Tweak debug code in autochanger reservation.
829 kes Add some additional locking in the cats directory in subroutines
830 that modify packet variables called from batch insert.
831 kes Rework how dcrs are allocated. new_dcr() can now be called
832 with an existing pointer, and it will simply clean it up.
833 This allows the reservation system to test various different
834 devices, and will permit easy device changes.
835 kes A bunch of changes all over to handle new new_dcr() calling
837 kes Work more on the Volume management in the SD. Remember Volumes
838 for tape drives and for autochangers (even virtual disk changers).
839 kes When looking at the Volume list to reserve a drive, handle
840 autochanger names correctly by interating through the changer
841 devices. Also call the Director to see if a Volume is suitable
843 kes Fix some bugs in bscan. Make sure all media records are written.
844 Make sure that valid JobMedia records are written for disk files.
845 Previously they were completely wrong.
846 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
847 that the URLs don't change and so that the developers will all
848 work off the same copy. Rebuild from scrach.
849 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
853 kes Fix seg fault in FD from incorrect digest size.
854 kes Fix argument to non-OpenSSL crypto.c subroutine.
858 kes Remove a few malloc()s from the encryption code.
859 kes Use the class calls to bsock in filed/backup.c and restore.c in
860 place of the old bnet_xxx code.
861 kes Implement code that does an on the fly calculation of the
862 signing digest during restore of encrypted files. It makes
863 a best guess at the algorithm, and if it is not correct, will
864 then revert to the old code which reads the file after it is
866 kes Implement at least one missing crypto stream in stream_to_ascii()
867 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
868 #877 where a reload with bad syntax causes Dir to exit.
870 Cut: 2.1.14 beta (not released)
872 kes Do not free a volume on a tape drive until another volume is
873 mounted and read, or the autochanger unloads the volume.
874 This should help the SD re-use volumes that are already mounted,
875 and should fix bug #886.
876 kes Apply patch from user brettedgar that allows gnome2-console include
877 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
878 kes Apply patch from Lucien Weller that fixes day of week calculation
879 because of DST flag problem. Fixes bug #887.
881 kes Move find_next_appendable_volume() to after acquiring a valid device
882 in reserve.c. This fixes bug #864 -- confirmed by reporter.
884 kes Unable to reproduce bug 872. However added additional testing for
886 kes Bug #874 resolved by documenting SQLite limitations.
887 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
888 kes Bug #881 resolved by removing typo in mtx-changer script.
889 kes Made Frank Sweetser's wiki the official Bacula wiki with his
890 approval. Added a link to the wiki on the web page, and implemented
891 a backup from http://paramount.ind.wpi.edu
893 kes Fix update allfrompool to pass pool name.
895 kes Convert to pure GPL v2 license.
896 kes Fix sscanf problems reported by Peter Buschman that caused
897 a bus error on Solaris.
898 kes Rework (simplify) the select prompt in bat.
899 kes Move get_jobid_from_tid() into lib and create a
901 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
902 should definitely fix the problem of lost error messages in the
904 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
905 kes Eliminate tcpd.h from the project. Enclose the #include from the
906 library with extern C ...
907 kes Add print of signal name when a signal is trapped.
911 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
913 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
914 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
915 makes SQLit3 run 30 times faster, though a bit less safe.
916 kes Implement --with-batch-insert in configure and detection of thread
917 safe libraries. It is on by default, but turned off if no thread
918 safe library (e.g. SQLite 2) is available.
920 kes Fix Bacula PostgreSQL buffer overruns.
921 kes Do better checking for NULL results returned from PostgreSQL;
922 implement retry for failed queries; clear results buffer after
923 failed query. Hopefully this will correct the PostgreSQL failures.
925 kes Implement algorithm to handle only one appendable volume with
926 Prefer Mounted Volumes = no.
927 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
928 returned from a query.
929 kes Make volume lock recursive.
930 kes Implement an additional volume reservation algorithm that
931 starts by considering all reserved volumes then uses the
932 old brute force algorithm of searching the resources to
933 find a suitable device.
934 kes Add new reservations debug code and refine the old code.
935 kes Update the win32/dll/bacula.defs file.
937 kes Tweak reservations algorithm to permit a few more cases, i.e.
938 volume reserved, but on different drive, ...
939 kes Enhance SD status to include Pool and Media Type for drive in a
940 more readable format (a bit longer).
941 kes Fix PostgreSQL double free.
943 kes Minor refactoring of restore decryption code.
944 kes Add code to smartall.c to detect double free of a buffer.
946 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
947 so that bsmtp will create a correct email address (mailbox only).
948 kes Modify 'memory' command so that the buffers are listed as 'In use'
949 to avoid confusion with Orphaned buffers.
950 kes I reworked the OpenSSL include/lib flags to be handled in
951 the standard Bacula way, which should fix bug #863 concerning
952 non-standard OpenSSL libraries.
954 kes Implement Help Browser window for bat.
955 kes Fix reload bug that reset StorageId to zero.
957 kes Fix TLS #ifdefing when TLS turned off.
958 kes Ensure that when labelling a tape with Slot=0 that InChanger
960 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
962 kes Add StartTime to final uar_sel_jobid_temp query so that we can
963 add DISTINCT (required by PostgreSQL).
964 kes Implement BSOCK authenticate_director() method. Eventually will
965 authenicate all daemons.
966 kes Move several more functions into the BSOCK class.
968 kes Add code to tell the OS that we no longer need a cached
969 file that we were reading. In findlib/bfile.c. Also,
970 only cache files that we are reading. Thanks to
971 Tobias Oetiker <tobi@oetiker.ch> for the idea.
972 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
973 kes Implement script to automatically generate cats and dll .def
975 kes Update README.mingw32 to include new .def file generation.
976 kes Correct typo in UTF-8 error message as reported by:
977 jhernandez <julianhernandez@gmail.com>
978 kes Add additional sm_check() code on debug level 1.
979 kes Set default debug level to 1.
980 kes Trap SIGABRT in attempt to get traceback.
982 kes Reduce bat connect timeout from 30 to 15 seconds.
983 kes More restructuring and implementing BSOCK class in place of
985 kes Remove a few unnecessary malloc() tests in crypto code.
986 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
987 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
988 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
990 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
992 kes Fix Verify InitCatalog. The attributes were not pointing to the
993 correct saved location.
994 kes Implement message callback so that GUI is sure to get all
995 daemon messages. Currently displayed in a dialog in bat.
996 kes Ignore SIGUSR2 (Bacula timer) in bat.
997 kes Apply regress patch from bug #859 to allow regress to work
998 with Solaris compiler.
1000 kes Begin adding TLS support to bat.
1001 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1002 clean up lex.c and make it more readable.
1004 kes Move more bnet functions into the BSOCK class.
1005 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1006 kes Complete change of berrno strerror() method to bstrerror()
1008 Release: 2.1.10 beta
1010 kes Cleanup incorrect email addresses in bsmtp.
1011 kes Make bat display initial messages rather than discard them.
1013 kes First cut of adding .mod to the run command.
1014 kes Implement auto display of messages in bat.
1015 kes Enhanced preferences to allow all Bacula output to be
1018 kes Try to make bsmtp date routines more generic.
1019 kes Fixed bug #856 autochanger documentation.
1020 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1021 kes Add new cats entry point so Win32 builds.
1023 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1025 kes Do better checking for the MySQL 64 bit libraries looking for both
1026 .a and .so libraries.
1027 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1028 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1029 kes Require the thread safe version of MySQL during configure. Thanks
1030 to Andre Noll for pointing this out.
1031 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1032 continuing in migration code.
1033 kes Apply implementation of tray-monitor font derived from gnome-console
1034 submitted by Andreas Piesk <a.piesk@gmx.net>
1036 kes Eliminate important memory loss in SQLite
1037 kes Fixed the batch insert MySQL thread specific data that was not
1038 being freed. See cats/mysql.c:db_thread_cleanup().
1039 kes Fix restore before command.
1040 kes Convert old hdr.name to name() in a few places.
1041 kes Implement update jobid command.
1042 kes Return all time_t dates in db_get_job_record()
1043 kes Stop watchdog in SD earlier.
1044 kes Put Pool just after Storage in please mount message.
1045 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1048 kes Update the po files.
1049 kes Fix Verify InitCatalog by making it cache attributes.
1051 kes Change name bacula-bat to bat for man 1 page to correspond to
1053 kes Check for client and store NULL pointers in status command. This
1055 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1056 kes Fix sign extended editing of %p.
1057 kes Clean out a little old #ifdefing in cats/mysql.c
1059 kes If time diff between DIR and FD is more than 600 seconds convert
1060 INFO message to WARNING.
1061 kes Implement heap size display in status for all daemons.
1062 kes Attempt to fix MySQL db open memory loss (not successfull).
1063 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1064 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1065 Query. This looks like a MySQL but but by doing extra releases,
1066 the memory goes away. This should fix bug #847.
1068 kes When backup fails, cancel SD before waiting for sd termination.
1069 kes If SD is waiting for FD to connect during cancel, wake up the
1071 kes Fix fsf code so that errno is correctly reported.
1072 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1074 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1075 so that Bacula doesn't later stumble into a seg fault.
1076 kes Use the term Restore Client in the restore Job report.
1077 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1078 the original job's FileSetId.
1079 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1080 spooling in migration jobs. Not yet tested.
1081 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1082 reading conf file from a pipe. However, do it with open_bpipe()
1083 rather than popen. Not yet tested.
1085 kes Fix an ugly bug where the VolCatBytes were getting updated
1087 kes Implement bconsole memory command that prints current memory
1088 usage, plus smartalloc dump.
1089 kes Clarify some error messages in backup, admin, and migrate.
1090 kes Shrink label dialog to smaller size.
1091 kes Invert Cancel OK buttons on restore to be OK Cancel.
1092 kes More strerror() to bstrerror() conversions.
1094 kes Start implementing bstrerror() in place of strerror().
1095 kes Stripping path -- seems to work.
1097 kes Prevent door and port files from being restored (mostly
1099 kes Free an unreleased buffer in compat code.
1100 kes Change console Job name from *Console* to -Console- to eliminate
1101 Win32 filename problems. Put Win32 path separator when creating
1102 Console file. This fixes bug #846.
1103 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1105 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1107 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1108 to force Win32 error message.
1110 kes First cut strip path. The data should be passed to the FD,
1111 but nothing is done with it yet.
1112 kes Enhance the digest and signature routines in the crypto
1113 library to accept a JCR and to use it to print error messages
1114 so that they will go in the Job report rather than the daemon's
1116 kes Simplify some of the verify signature code.
1117 kes Simplify a few of the alternative returns in the signature
1120 ebl Use only POSIX regex instead of GNU regex in breg.c for
1121 File relocation. It fix broken freebsd compilation.
1122 kes Convert all other Dir files to use new ua class message
1124 kes Tentative fix for missing digest signature in bug 807.
1125 kes Correct handle problem in new win32_ftruncate routine.
1126 kes Convert ua_purge.c and ua_update.c to use new ua class
1127 message routines for bat.
1129 kes Correct incorrect installation of LICENSE in Win32 installer.
1130 kes Display LICENSE at the beginning of the Win32 install.
1131 kes Attempt to correct the need for the png files to be installed
1133 kes Reapply my bat.conf install script in qt-console. I think I
1134 editted bat.pro instead of bat.pro.in and it was lost.
1135 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1136 the /var/lock/subsys for subsysdir. Also corrects typos in the
1139 kes First cut update job.
1140 kes Correct configure to include qmake of src/qt-console directory.
1142 kes Make restore job yes/mod/no print in one command so GUI works.
1143 kes First cut implementing backup and restore client.
1144 kes Correct editing in Verify output that caused a seg fault.
1146 kes Insure that bat.conf is not overwritten during installation.
1147 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1148 while I was implementing migration in March 2006 !
1150 ebl Cleanup file relocation, using char *RegexWhere instead of
1151 char *where + bool where_use_regexp
1152 kes Update some manpages and add bat manpage.
1153 kes Make a first cut at converting bacula.spec.in for bwx-console
1155 kes Apply patch from John Goerzen to add hostname as fourth argument
1156 to make_catalog_backup script.
1157 kes Fix typos I introduced into bsmtp.c
1158 kes Make pm_strxxx() routines handle input of NULL pointer. This
1159 is to protect from NULL pointers returned from SQL databases.
1160 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1161 kes Add more debug to FIFO code -- fix fifo regression test.
1163 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1164 kes Add thread timer to bnet_connect() to break from OS if wait time
1167 kes Update Win32 build to include new files, new symbols, and
1169 kes Implement socket level heartbeat (tcp_keepidle)
1170 ebl Commit File relocation patch
1171 kes Make bat have 'make install' target.
1172 kes Warn during install if old gnome-console binary found.
1173 kes Warn during install if old wx-console binary found.
1174 kes Add -8 option to bsmtp command line to add content type utf-8.
1175 Fixes bug #809. (Character coding problem in bsmtp).
1176 kes If < is found in target (from, to, cc) then do not enclose the
1177 target in < > in bsmtp. Fixes bug #772 (malformed address).
1178 kes When printing certain items in dbcheck, stop after 300000.
1179 Fixes bug #822. (dbcheck loops).
1180 kes Incorrect status in Dir after waiting for mount with poll set.
1183 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1185 kes Print waiting to reserve a device every 5 mins.
1187 kes Don't call close_part in label.c if tape and relabel.
1188 kes Don't free volume if busy in close() -- should help with
1190 ebl Fix #824 RunScript bug (After script could be execute twice)
1191 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1192 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1193 Add a regression script to test RunScript
1195 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1198 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1199 deprecated. No additional bugs will be fixed, and they will be dropped
1200 in a future release (probably 2.4.0).
1201 kes Change name of wx-console to bwx-console to make it more Bacula
1203 kes Change the name of gnome-console to bgnome-console to make it
1206 kes Some time in March, a Feature Request with patch from Jorj Bauer
1207 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1209 The ability for the director to validate a Client (FD) CN against
1210 an arbitrary set of patterns rather than the hostname, with
1211 A new 'TLS Allowed CN' set of directives which are implemented
1212 in the Client resource. Then pattern matching is used in place
1213 of hostname matching against the Certificate's CN. As an example, we
1214 have certificates which (a) use a local CA, and (b) have a CN of the
1216 kes Add new/changed entry points to Win32 build
1217 kes Create unaccepted-projects for projects that are not accepted.
1218 kes Simplify locking in the reservations system.
1219 kes Add more debug code in reservations.
1220 kes Make sure error condition on reserving a volume is handled correctly.
1221 kes Correct handling of volume_in_use.
1222 kes Correct handling of initializing a device.
1223 kes Move handling of broadcasting releasing a device into release_device().
1224 kes Correct attaching dcr to dev so that it is only done if device
1225 is properly initiated.
1227 kes Locking debug level tweaks in SD.
1228 kes Tweak new Volume code.
1230 kes Add exec external-command [wait-seconds] to bconsole. This
1231 executes the external-command. Note! normally external-command
1232 should be enclosed in double quotes.
1233 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1234 it should normally be off in a production system.
1236 kes Implement die command for SD so that we can force it to dump.
1237 kes Implement SD lock debug code.
1238 kes Implement new algorithm for keeping Volume list in SD. It
1239 is now owned by the device.
1241 kes Implement new code for freeing in use volumes that should
1242 resolve if not all, some of the problems of multiple drive
1243 tape conflicts described in bug 801.
1245 kes Fix gui/bacula-web/images files in svn.
1246 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1248 ebl Fix a bug in batch mode (in string escape)
1249 kes Correct migration prune SQL typo that crept in in a
1250 recent 2.1.x change.
1252 kes Move bnet_despool() into class in bsock.c
1253 kes Modify job report to include director name and Build OS.
1254 kes Move drop root privilege and check_catalog() before fork.
1255 kes Add update database scripts (version 9 to 10) to updatedb directory.
1257 ebl Check size and age of each file after its backup to see if
1258 it has changed during backup, if 'checkfilechanges' is set.
1259 The FD will do an extra check (stat(2)) after
1260 each file backup. mtime, ctime and size are compared with
1261 'before backup' information. If time or size mismatch, an
1262 error message will be generated. You must upgrade FD to use it.
1264 kes Make database name and user configurable
1265 --with-db-name=xxx --with-db-user=xxx
1266 kes Add back database type to message.c for debugging.
1268 kes Implement dir_sql() which issues an SQL query.
1269 kes Modify bat medialist to use dir_sql() and do some minor C++
1270 formatting as well as eliminating a number of pointers, simplifing
1273 kes Fix some of the mtx-changer grep commands for tape label readers.
1274 kes Convert a number of bsendmsg into the appropriate send/warning/error
1275 message class calls.
1276 kes Suppress the using database message in the .sql command.
1277 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1279 kes Add context menu for floating a window.
1280 kes Some minor cleanup and name changes in qt-console
1281 kes Add doing mt setblk 0 in Win32 mtx-changer.
1282 kes Apply Martin's bug fix to move definition of ENODATA for
1284 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1285 sqlite2 and sqlite3.
1287 kes More pruning cleanup.
1288 kes Turn on wait_for_drive by default in mtx-changer.
1289 kes Turn on Batch insert code by default as it now passes regression.
1290 kes Add ./configure --enable-bat to enable building of Bat.
1291 No install yet though.
1293 kes Implement a new .sql command for bat.
1294 kes Implement code to turn off pruning in obtaining the next volume.
1295 Pruning is turned off for the status dir command, but turned on
1296 for SD requests and for the list nextvolume command.
1298 kes Correct Qmsg() that was not updated correctly when committing a
1299 previous change (probably the recent TLS patch).
1301 kes Write new subroutine is_volume_purged() that explicitly checks
1302 if the Volume is purged, and if so marks it as such. This should
1303 resolve problems reported about needing to mount twice to recycle
1305 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1306 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1307 amount of duplicated code.
1308 kes Do volume pruning only for the Media Type desired (reduces pruning time
1309 if multiple Media Types are in the same pool).
1310 kes Implement more detailed info in the Job report for the Bacula version
1312 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1314 ebl Add bbatch tool to bench database and insert mode.
1315 Fix sql quote stuff in batch mode
1316 Fix sql stuff for mysql
1318 kes Correct problems with am/pm scheduling. Fixes bug #808.
1319 kes Implement new prunning code that prunes up to 1000 jobs at
1320 the same time. The same technique can be applied to a number
1321 of other prune/purge subroutines.
1322 kes Add an insanity check when starting a new tape job to ensure
1323 that the tape position has not been changed. If so fail the
1325 kes Fix Win32 build for dlls to add the folllowing:
1326 src/lib/bsock.c -- new file with new entry points
1327 src/lib/dlist.c -- new entry points
1328 src/cats/sql_create.c -- new entry point
1329 src/cats/sql_cmds.c -- new DATA item exported
1331 ebl batch mode cleanup bscan-test is ok now.
1332 kes Implement SD code to check length of disk volume before appending.
1334 kes Correct return status on db_batch... routines.
1335 kes Add call to db_write_batch_file_records() to migration code.
1336 ebl Fix AfterJob timing
1337 kes Move the checking of the database in initializion of the Director
1338 to after we drop privileges. This avoids the need for both root
1339 and bacula access to the DB.
1340 kes Correct a misplaced variable definition in src/filed/backup.c
1341 kes Correct how the new batch insert db_create_attributes_record()
1342 uses the arguments. Caused a seg fault in bscan.
1343 kes Implement lock() and unlock() methods in DEVICE class.
1344 Implement block() and set_block(xx) methods in DEVICE class.
1345 kes Modify bnet_connect() so that it uses time() to check for the
1346 wait time expiring (on some OSes, some system calls may not
1347 return immediately).
1348 kes Modify Verify to obtain the previous JobId when it is actually
1349 running rather than at schedule time (as it was in 1.38.x).
1350 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1352 kes When checking pid in pid file, continue running if the pid is
1353 the same as ours. This occurs on IRIX after a system crash.
1356 kes Extend new GUI API.
1357 kes Make the ua structure a class, and implement send_msg(),
1358 error_msg(), warning_msg(), and info_msg().
1360 kes Apply fix from for building wx-console on the Mac from
1362 kes Implement new select mechanism for GUI programs.
1363 kes Reorganize initialization of stackedWidgets in bat.
1365 kes Add updated nagios plugin supplied by Christian Masopust.
1367 kes More bat implementation.
1368 kes File migrate bug with Pool Occupancy using mediaid instead
1369 of jobids. Fixes bug #795.
1370 kes Fix orphaned buffers in filed backup and verify due to
1371 crypto buffers not freed during errors. Fixes bug #789.
1372 kes Extend new GUI api code to tree commands.
1373 kes Ensure that tree and dot commands check console ACLs.
1374 kes Permit marking directory with trailing slash.
1375 kes Allow 20 console connections (instead of only 10).
1377 kes Add smartctl call to bacula-sd.conf as an example of getting
1380 kes Modify jobq.c to let simultaneous restore jobs run. This may
1381 cause them to fail if they cannot get a drive.
1382 kes Add Client Connect Wait to Storage daemon to permit users to
1383 modify the time the SD waits for a FD connection.
1385 kes Correct virtual changer check which was backwards. This caused
1386 volumes to be unloaded into slots already occupied.
1388 kes Apply Command ACL filter to JobId list in restore command.
1389 kes Correct typeo in var.c patch.
1391 kes Don't let Bacula prune File or Job records for the current Job.
1392 kes Fix variable substitution pad + inc bug reported (with patch)
1395 kes Correct SQLite log table index as reported by Luca Berra.
1397 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1399 kes Begin implementing new comm signals for API.
1400 kes Fix a few places in lib/message.c where the open fd may
1402 kes Continue implementing lib/bsock.c (real class). Make jcr,
1403 who, host, and port private. There are new methods to access
1404 them for non-class use. This required touching a number of files.
1406 kes Add LANG=C to autoconf/randpass so it works with languages other
1407 than English. Fixes bug #788.
1409 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1411 You will not be able to generate Include/Exclude list any more.
1412 It will be fixed soon.
1413 If you want to use this, you can apply
1414 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1416 kes Restore of sockets created false error messages because Bacula
1417 no longer restores sockets, but the code was still trying to
1418 set the attributes on a non-existent file. Reported by a user.
1419 ebl finish RecyclePool feature
1420 Media will takes Pool.RecyclePool
1421 when moving from Scratch to a Pool or when user will do
1422 update volume=xxx frompool
1423 To use it, add RecyclePool = aPool to your Pool resource
1426 RecyclePool = Scratch
1430 kes Expand new BSOCK class adding signal() and new BNET signals.
1431 kes Begin enhancing the dot commands adding a new API function
1432 that returns more information and will make it easier
1433 to interface to the Director from a program.
1435 kes Make DEVICE fd private. Its new name is m_fd, and can be
1436 obtained with dev->fd() outside the class. This is the
1437 first of many DEVICE members to be made private.
1438 kes Implement Michael Renner's idea on having a virtual disk
1439 changer. I made some minor modifications (e.g. I did not
1440 implement the Virtual Changer directive, but simply set
1441 the Changer Command to an empty string.
1443 kes Implement a BSOCK send() method that writes the whole record
1444 in a single write() request rather than in two.
1445 ebl add update volume=xxx recyclepool=yyyy
1446 volume takes recyclepool from pool when using update volume=xxx from pool
1448 kes Fix encryption deblocking bug, which caused some restored files
1449 to be truncated. This fixes bug #763.
1450 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1451 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1453 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1454 ebl Use btime_t instead of uint64_t in media patch.
1456 kes Optimize the use of the database a bit in the Status dir command.
1457 Only open it when needed, ensure that if any previous database
1458 was opened, it is closed.
1460 kes Correct VolCatBytes bug from media patch.
1461 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1462 in the case of orphaned records.
1463 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1464 and File records in 300K chunks to be more efficient. This
1465 idea came from Juan Luis Frances (if I remember right).
1466 kes Apply Eric's scratch patch that moves a purged Volume to
1467 the RecyclePool. Question: how is RecyclePool set? what
1468 happens to the ScratchPool?
1469 kes Apply Eric's media patch that collects read/write media
1470 times as well as byte counts. This patch requires a
1471 simultaneous upgrade of the DIR and SD. Note, there
1472 should be some way to turn off timing. I'm not sure
1473 times are in Bacula units.
1474 kes Apply Eric's batch-insert patch.
1476 kes Update projects list.
1478 kes Implement Include/Exclude file lists in FD as dlists using
1479 the new dlistString class. This permits efficiently having
1480 large include/exclude lists and completes project Item 25.
1481 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1482 console is authorized to cancel the job. This fixes bug
1484 kes Modify SD so that the VolCatJobs medium record is updated
1485 at the beginning of a Job rather than the end. This
1486 fixes bug #775 where exceeding MaxVolJobs caused jobs
1488 kes Added a mutex around getting and setting Volume information
1489 so that multiple simultaneous jobs will single thread.
1491 Switch to using Subversion
1492 kes Remove src/pygtk-console/ from configure
1494 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1495 plus the entrypoints.
1496 kes Apply patch supplied that corrects debug print
1497 in canceling jobs for max run time. Supplied as
1498 part of bug #621, which was previously fixed.
1500 kes Test on job_canceled() and sd_msg_thread_done inside
1501 loop starting the message thread to avoid a race condition.
1503 kes Remove rl_catch_signal from console.c as it conflicted
1504 with the header definition. Fixes bug #765.
1505 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1507 kes Clarify some stored/acquire messages to indicate if the
1508 problem is with read or append.
1510 kes Fix memory leak with storage ids in cats/sql_get.c
1511 kes Terminate watchdog earlier to avoid reference to released
1512 memory -- reported by Jason Austin.
1513 kes Move closing the database from jobq.c to the director daemon
1514 termination routine. This fixes memory leaks for shadow jobs
1515 (i.e. migration jobs).
1516 kes Free up the unique jobid chain items in migrate.c. This fixes
1517 a memory leak problem.
1518 kes Convert some ugly looking for statements to use foreach_alist
1519 in findlib/find.c. This will facilitate converting the structures
1520 to use dlist (for large include/exclude lists).
1521 kes Fix a bug in the btree.c and btree.h routines, then rename them
1522 rblist and add them to be built in src/lib. Include some new
1523 methods written by Rudolf Cejka that make the code more readable
1524 (hides some of the ugly casting).
1525 kes Add set_next() and set_prev() methods which make the code much more
1526 readable. Also add a new dlistString class that facilitates storing
1527 strings in dlists. To be used in the large include/exclude lists.
1528 kes Make some trivial modifications to lib/tree.h that use rblist
1529 rather than dlist for storing the tree links. This was suggested
1530 by Rudolf Cejka. The result of this is that the restore tree now
1531 uses red-black binary trees rather than simple linked lists. This
1532 should give rather dramatic speed improvements for directories
1533 contining large numbers of directories/files (more than 10000).
1535 kes Fix maxruntime bug #621.
1537 ebl Implement the include JobID in spool file name project.
1538 kes Reorder projects file in order determined by Jan 2007 vote.
1539 kes Implement item #12 on project list -- quick release of FD by
1541 kes Fix open of SQLite3 db where user does not have write permission
1542 so that DIR does not crash. Fixes bug #761.
1544 kes Add back missing @ in Win32 Makefile.
1545 kes Change 'Device not configured to autolabel' from INFO
1547 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1548 which should restart an indefinite # of times.
1549 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1550 other DIR specifications.
1552 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1553 Fix path quoting in SQLite scripts.
1554 Fix problems with SHGetFolderPath.
1556 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1558 kes Fix Job restart on error bug that promotes an Inc to a Full
1559 backup. This should fix bug #755.
1560 kes Add qt-console and first cut of code.
1564 kes Fix Bacula->Documentation link on Win32 to point to index.html
1565 instead of bacula.html. Fixed bug #750.
1566 kes Return JobId in db_get_job_record() when JobId==0. This should
1568 kes Do not release source pointers when restarting a failed job.
1570 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1571 This *should* fix bug #747.
1572 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1575 kes Modify USTORE constructor to set an empty store_source string,
1576 and don't copy the store_source string in a cancel. Hopefully
1577 this will fix Arno's seg fault, bug #744.
1578 kes Add back code to disable conio in configure. Fixes bug #743.
1579 kes Correct the Options scanner in the FD to correctly handle
1580 SHA1 option, which was eating the next option. Reported by
1582 kes Add code to indicate when the SD is spooling, spool wait, and
1583 despooling as requested by Alan Brown.
1585 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob