1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 kes Remove jobq.c constraint that read and write SD must be
15 different. This may lead to more deadlocks in the SD,
16 but they should be resolved there.
17 kes Ensure that job report is always printed even if job is failed
19 kes Don't print job report twice for failed VBackup jobs.
21 kes Fix editing of retention time difference to use 64 bit
22 int instead of 64 bit unsigned. This should permit very
23 long retention periods.
24 kes Implement code to prohibit a write job from appending to a
25 Volume that will be used for a read operation. This is
26 new code and could possibly cause some conflicts.
28 kes Integrate James Harper's Exchange Win32 plugin patch.
29 kes Apply patch from Marco van Wieringen that implements the new
30 Solaris libsec interface for ACLs so that Bacula can save and
31 restore both the new ACLs and old ACLs.
32 kes Marco's patch also corrects the file dependency generation code
33 so that it works properly both with shared libraries and static
35 kes Marco's patch also includes a small cleanup of the cats Makefile
36 to remove some references to non-existent files.
38 kes Modify win32 Makefiles to use full paths in most cases.
39 In particular add MAINDIR environment variable that points
40 to the main Bacula source directory.
42 kes Add read volume list code to SD -- not yet used.
43 kes Add James' binutils patch
44 kes Split volume management code out of src/stored/reserve.c into
46 kes Modify configure to do an automatic make clean. This ensures
47 that any changes to ./configure options are handled correctly.
49 Beta version 2.5.16 release:
51 ebl Rename JobStat table to JobHistory
52 kes Ensure that only normally terminated jobs are migrated.
54 kes Add Makefile dependency when using LIBTOOL_LINK so that any
55 change in ./configure options will be accounted for.
57 kes Fix typo in the ACL patch that I overlooked.
58 kes Apply Marco's libtool include patch.
60 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
61 errors during restore.
62 kes Minor cleanup of create_restore_volume_list() code.
63 kes Fix typo in console Makefile.in
65 ebl Fix #1110 about RunScript that can't execute a script with
66 Unicode caracters in the path.
68 kes Apply tray-monitor patch from Bastian Friedrich to make it
71 kes Apply cleanup patch from Marco
72 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
73 that implements libtool to create shared objects out of
75 kes Fix tray-monitor so it will speak to new FD.
76 ebl Fix bug with ansi label when volume name length < 6
77 ebl Fix segfault in debug level > 50 with btape.
78 ebl Remove warning message in btape when command is empty.
79 kes Fix Win32 build to pull in new BACULA define.
81 kes Change IncludeDir to Exclude Dir Containing.
82 kes Implement code to prohibit ExcludeDirContaining in an
83 Exclude section (same for Plugin and Options). A bit
84 of a kludge with RES_ITEM2 ...
85 ebl Add field to command list to restrict Runscript console
87 ebl Use a separate JCR when running Console command with Runscript.
88 ebl Permit to mark version as Beta in some ouputs
90 kes Add plugin types in jcr.h to reduce need to cast.
91 kes Do better checking of plugin return values.
92 kes Free plugin context after calling pluginFree() as
94 kes Allow plugin to call JobMessage with NULL context.
95 kes Do not add plugin to global list if loadPlugin returns error.
96 kes Rework plugin.h a bit to reduce dependence on Bacula.
98 kes Move generation of bsr file for Virtual Backup to run section
99 so that it is generated just before actually running.
100 Suggested by Graham Keeling.
102 kes Add malloc and free Bacula entry points for plugins. Increment
103 FD plugin interface version. Create a bacula plugin context
104 structure to keep track of whether or not the plugin is disabled.
105 kes Apply FileIndex fix for plugin name stream suggested by James.
106 kes List plugins in FD status report when debug > 0.
108 ebl Add a new VerId variable that is printed in version command.
109 kes Fix migration SQL not to migrate a job that has not terminated.
110 This is a partial fix to bug #1164.
111 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
112 backup start time bug reported by Graham Keeling.
114 ebl Fix possible bug in cancel_job() with job that are not
117 kes Fix bat build for Win32.
119 kes Copy plugin link field into ffpkt.
121 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
122 It provides FileRegex in bsr files and code to collect regex
123 from the user during restore, an Allow Mixed Priorities feature,
124 and documentation for the above.
125 ebl Remove db berkeley from configure process
126 kes Do dirty check on hostname (Linux only) and if not resolvable
127 use localhost as default.
128 kes Increase vtape max block to 20GB.
130 kes Refactor restore code to create a close_previous_stream(). This
131 This may destabilize the source.
132 kes Implement planned startRestoreFile() plugin call.
133 ebl Remove missing Loaded information from status slots storage command.
134 ebl Fix Console command problem that cancels the job
135 kes Add more plugin restore debug code.
137 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
138 kes Rewrite plugin restore interface a bit to correspond to how Bacula
139 creates and writes to the restored file.
140 kes Add some DebugMessage() calls to the bpipe-fd.c program.
142 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
143 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
144 Bat; allow add and delete in place of mark and unmark.
145 kes Another attempt to fix the endRestoreFile plugin bug noted below.
147 kes Apply dbi driver patch from Joao.
148 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
149 Bastien Friedrich reported the bug.
150 kes Create plugin instance only when FD job starts.
151 kes Add new FD plugin event: bEventCancelCommand when
152 a cancel command is issued to the FD.
154 kes Add cmd_plugin flag to jcr so we can globally know if a
155 command plugin is running.
156 kes If command plugin running, do not attempt (for the moment)
157 to get Win32 extended attributes.
158 kes Ensure that proper Win32 flags are set in bfile packet
159 if plugin_bopen() works on Win32.
160 kes Remove generated src/plugins/fd/Makefile
162 kes Implement build and install of bpipe-fd.so plugin.
163 kes Rework the interface that passes packets to the plugin
164 so that the packet is started and ended by the packet size.
165 This allows the driver to do a sanity check.
167 kes Rework the pluginIO Bacula internal code to enable
168 proper handling of Win32 error codes from GetLastError.
169 kes Apply Joao's patch to regress startover_libdbi.
171 ebl Add -B option to dbcheck to get catalog information
172 kes Fix Win32 build to include new library function.
173 kes Remove some old reader/writer code.
174 kes Implement ./configure --with-plugindir=xxx
175 ebl Fix the mysql bug in the new accurate code
176 kes Improve plugin debug. Create plugin test.
177 kes Set main thread specific data to INVALID because it
178 has no jcr. This allows debug output to work correctly.
179 kes Add src/plugins/fd/Makefile to ./configure process.
180 kes Make first cut attempt to correct SQL that computes the current
181 Pool usage. This is to fix bug #1159.
182 kes Do a bunch of plugin cleanups for Win32 and more careful checking
183 of PluginDirectory and whether or not a plugin was found.
185 kes This code should fix the race condition that leads to a Director
186 crash at job end time when the job list is updated. This was reported
188 kes Add more plugin documentation and fix include of config.h for
189 Win32 build (I hope).
191 ebl Revert to htable instead of rblist
192 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
193 tree instead of htable.
194 ebl Use a dedicate DB link to compute and send the accurate list
197 kes Fix compile errors in filed/fd_plugin.c.
199 kes Remove all double quotes from SQLite creating script and
200 replace by single quotes as suggested by John Huttley.
202 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
203 It significantly improves the performance of dbcheck for
205 kes Fix bad debug code call in src/filed/accurate.c
207 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
208 output. Perhaps we really need to implement M_SAVED.
210 kes Fix bug #1156 FD crash during processing of Accurate data.
211 kes Tweaks to htable code to improved debugging and make names
212 a bit more meaningful.
214 ebl Remove time_t from update_stats()
216 kes Modify the license of the example plugin program to allow
217 it to be used by anyone for making a Bacula plugin.
218 kes Make apply_rp_codes() in bpipe-fd.c be static.
220 kes Remove Encryption and Accurate lines in vbackup output -- not used.
221 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
222 kes Add host name to items printed during dump.
223 kes Make Check File Changes default on.
225 kes Set the default FD timeout to 3 minutes (previously 30).
226 kes Apply Bastian Friedrich's weird spelling correction patch.
228 kes Always print Verify hash differences. Rename variable to make the
229 code slightly more readable.
231 kes Correct tests for MaxFullInterval as reported by
232 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
233 kes Fix MaxDiffInterval code as well.
234 kes Enable Win32 plugin load code in lib.
235 kes Make Verify code that computes disk checksums use the same
236 algorithm as backup when dealing with sparse files.
237 kes Attempt to run VSS on any systems newer than Vista -- should
238 make it work on Windows Server 2008.
239 ebl Change the new statistic implementation. Remove the UseStatistic
240 directive and add a 'update stats [days=...]' command. You can
241 now decide when copy job records from Job table to JobStat.
242 Statistics are much more accurate with this.
244 kes Fix SQL case problem that may cause the failure of DiskToCatalog
246 kes First cut adding SD plugins.
248 kes Add Slot if it is non-zero to writing bsr file after a
250 kes Change a number of bnet_fsend() into class method calls.
251 kes Begin audit of diff of 2.4 branch to trunk code.
253 ebl Fix the mysql creation script that double-created an
254 index of the same field on the Media table.
255 Add an index to on VolumeName to the Media table for mysql.
257 kes Another try at fixing Vbackup. It looks much better this time.
258 Disable file index sanity check in FD with value stored in
259 attributes record because with Vbackup the File Index gets
260 changed, but not the attributes record.
261 Enhance some debug code.
262 Fix handling of re-indexing records that are copied in Vbackup.
264 kes Made level_to_str() know about Virtual backup.
265 kes Set correct Virtual backup write pool.
266 kes Fix compile warning in new dbcheck port code.
267 kes Fix migration code broken by previous virtual backup fix.
269 kes Fix problem of Virtual backup not writing a sequential FileIndex.
270 kes Reset Virtual backup time/date to the value from the last backup.
271 kes Ensure that storage name is passed to SD on read.
272 kes Correct a problem with Level and Virtual backup, rework how
273 bsrs are printed in debug to use standard routine.
274 kes Apply patch from Chris in bug #1133 that provides alternate db port
276 ebl Remove catalog dependency from bcopy tool.
277 ebl Modify catalog scripts to have an easier packaging integration,
278 using default variables.
279 Make difference between SQLite3 and SQLite in db_get_type()
281 kes Apply most of changes in a patch from:
282 Michael Stapelberg <michael+bacula@stapelberg.de>
283 that allow the Bacula FD to compile on IRIX 6.5.
285 kes Apply patch from Bastian Friedrich that accepts a yes on a
286 delete volume command line.
287 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
288 job when reading from one autochanger and writing to another.
289 kes Minor tweaks (copyright dates convert to use method instead of bnet).
291 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
292 drives when no tape is mounted.
294 kes Add additional info to some SD messages.
295 kes Add fix supplied by Martin Simmons for turning off EOL character
296 in new console multi-command code.
298 kes Fix a Verify InitCatalog problem where in certain cases
299 a garbage filename may be entered in the verification database. This
302 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
303 sent in by Riyas Yoosuf.
305 kes Fix seg fault in Dir during estimate command with no level value
306 given. This fixes bug #1140.
308 kes Add message to migration job when the target job is already migrated.
309 This closes bug #1129.
312 kes Raise some restore debug levels.
313 kes Replace off_t by boffset_t where ever I found it.
315 kes Define a machine dependent ioctl request type for use with
318 kes When a migration job actually runs, re-check the Job record
319 and skip if the job is already migrated. This should
320 significantly reduce the problems with bug #1129.
322 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
323 turn off glibc checks that prevent getting good dumps.
324 kes Implement console 'wait mount' command. Doesn't yet work.
325 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
326 kes Break the do_swapping into do_unload, do_swapping, and
327 do_load. It is much more logical that way.
328 kes Implement a set_dcr_from_vol subroutine in acquire.c for
329 reading volumes. This allows the dcr to be refreshed after being
330 zapped when the wrong volume is mounted.
331 This should fix bug #1126 -- During multiple tape restore, bacula
332 does not ask for physical tape change, but rereads same tape
334 kes Apply patch submitted for bug #1107 with a small modification.
335 This fixes a bug where bcopy copied too many records.
336 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
337 This fixes bug #1124.
338 kes Make the default bat restore Pool be Any. This fixes bug #1118.
340 kes Remove debug statement that crashes the SD at the end of
341 a tape during restore. Fixes bug #1125.
343 kes Implement Win32 bat changes made to Branch-2.4
345 kes Tweak separator command in console to start disabled and
346 allow defining no separator character. Also make code a
347 bit more fault tolerant.
348 kes Make btraceback write the traceback to the working directory
349 before attempting to mail it.
350 kes Add a RFC to Projects.
352 kes Attempt to implement a kludge to make Qt work with bat
354 kes Setup rstorage correctly. Virtual backups are working.
356 kes Move setting JobLevel and JobType into a method, which should
357 allow completing Virtual Backups.
358 kes Fix verify jobs to work again.
360 kes Virtual Backup tweaks -- it is close to working.
362 kes Ensure that SD tried to mount a volume not in an autochanger
363 at least once before asking for operator intervention.
364 kes Make SD aware of Virtual Backup jobs.
365 kes Add VirtualFull for bat.
366 kes Changes to get read storage correct for Virtual Backup.
368 kes Remove old code from label.c
369 kes Split display_display_info() out of write_bsr_file()
370 kes do_vbackup_init() working -- i.e. bootstrap file built.
371 kes Change Bacula trademark owner from John Walker to Kern Sibbald
372 kes First non-working cut of vbackup
373 kes Correct FD heartbeat code to use volatile variable accessed by
375 kes Zero thread id with memset if on Win32 in case it is a struct.
376 kes If cannot create JobMedia record, continue to try to write eof
377 and clean up in block.c
379 kes Add code to interface OpenSSL to new Win32 pthreads code which
380 used a structure for thread_t.
382 ebl tweak bat for win32 compilation
384 ebl Remove tokyo cabinet from the source
385 ebl Update configure/autoconf to support berkeley DB
386 ebl Add a sort to db_get_file_list() to improve bsr construction time.
388 kes Add a mtx-changer.conf file that is not overwritten during
389 an upgrade. It fully configures the mtx-changer script.
390 kes Clear in-use bit on vol when unused while swapping.
392 kes Remove sleep at end of ./bacula
393 kes Clear hash packet for hardlinked files correctly. This corrects
394 a long standing bug where hardlinked files selected individually
395 would occasionally not be restored.
397 kes Apply Eric's patch to ensure that autoprune does not return
398 a Volume not in the autochanger unless requested to do so.
399 kes Correct bat restore display of multiple drives. This fixes
401 kes Do find_a_volume() each time an unload is done. This
402 fixes the failure of maxvol2-test.
404 kes Add some SD debug code.
405 kes Do find_a_volume() each time an unload is done.
406 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
407 and adds --with-db-port to ./configure.
408 kes Use Qmsg() in job.c watchdog callback.
410 kes Release main control rwlock if ABORTing.
411 kes Make watchdog connect timeout queue messages rather than sending
412 directly to avoid lock conflicts with the real thread.
413 kes Add const char in dbd.c to avoid compiler warnings.
414 kes Fix python compiler string warning. Note, IMO the GNU C++
415 compiler guys have made a *very* bad change to their compiler.
416 They now force all strings to be 'const' unless you explicitly
417 cast them, which is extremely ugly and ruins nice code as well
418 as creates a lot of useless work.
420 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
421 mt. This fixes bug #1116.
422 kes Add const in python files to reduce compiler warnings.
423 This may have to be backed out because of later compiler
425 kes Fix failure of 2drive-concurrent-test. Always read label;
426 clear_unload() only after drive is defined in acquire_for_read().
428 kes Generally clean up the manual tape loading code. The main
429 conceptual change is that when a volume is marked to be unloaded,
430 its volume name is retained, and it is only marked as unloaded
431 when either the autoloader says it is unloaded or another tape
432 is read on that drive.
434 kes Add debug code and refactor subroutine in stored/mount.c
435 kes Fix format problem in bscan output reported in bug #1105.
436 ebl Fix get_next_volume_for_append logic with autochanger
437 - use pruned volumes if found
438 - don't reset the inchanger flag after getting a recycled volume
440 Fix recycle_oldest_purged_volume to take InChanger flag in account
442 ebl Add mmap/unmmap implementation for tokyodbm under win32
444 kes Make first step toward eliminating globals from config
445 scanning. Also should be a workaround for FORTIFY_SOURCE
446 GNU C bug -- fixes bug #1042.
448 kes Apply duplicate job tests to restarted jobs.
449 kes Copy more data when restarting a job so that run
450 overrides are kept. This should fix bug #1094.
452 kes More word alignment cleanup.
453 kes Fix bug where SD did not ask operator if the device could not
454 be opened. Reported by Eric.
456 kes Add dbuser to DIR conf file (replaces user).
457 kes Add --with-db-password to ./configure
458 kes Fix regress to handle db_password.
459 ebl Add new 'status storage slots' that list autochanger
461 ebl Update vtape driver to compile only under Linux.
462 ebl Fix a bug when restoring with a wrong mediatype.
464 kes Eliminate ints from conf files and structures to avoid
465 word alignment problems
467 kes Fix bug reported by Scott Barninger where the bacula script
468 refers to scripts in the wrong directory. Needed to meet the
469 requirements of recent FHS location changes.
470 ebl Disable vtape for FreeBSD.
472 ebl Modify disk-changer to check if slot contains something before
475 ebl Fix vtape on win32 and debian.
476 ebl Fix autoselect patch (cause segfault).
478 ebl Fix autoselect option broken for a while. Fix #1089. Need some
479 work with StorageId to be able to use a particular drive in a
482 ebl Rename vtape to vtape.
483 ebl Update vtape driver.
485 ebl Modify vtape driver to avoid sparse file.
486 kes Add make clean of qt-source directory during ./configure
487 kes Store last block number written to tape in DEVICE and
488 use it for testing for correct last block on EOT.
490 Release Version 2.4.0:
494 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
495 This fixes bug #1095.
497 kes Add create_postgresql_database.sql to Win32 installer. Should
498 fix problem reported by Juilio Monteiro.
499 kes Get correct slot when auto unloading a device. This fixes bug
502 kes Fix multiple media restore.
503 kes Make DEVICE Slot private and access it via a method.
504 Allows better control over when it is set and cleared.
505 kes Fix possible seg fault if SQL error.
507 kes Add Martin's fixes to argument scanning for the estimate
508 command. This fixes bug #1093.
509 kes Add debug code to SD.
510 kes Fix renaming a Volume, which used the wrong Volume name.
512 kes If operator has rewind tape, print warning, release tape and
513 try once more. If tape is positioned somewhere, something went
514 wrong, so mark the tape in error and try once more. Previously
515 this error was fatal, now it produces an error message.
516 kes Ensure correct volume name displayed during restore
517 kes Ensure that Volume is mounted for restore.
519 kes Fix a few more Coverity reported problems.
521 kes Apply Allan Black's status dir job count patch.
522 ebl Add information about IMPORT/EXPORT slots in mtx-script.
523 kes Enhance a couple of SD debug messages.
524 kes Tweak unload flag setting and ensure it is set during swap.
526 ebl Fix #1091 about bad output in estimate command.
528 kes Modify autochanger locking to attempt to avoid race
530 kes Make sure device not busy before doing label command.
531 kes Display open() errors except when polling. Previously too
532 many were suppressed. This should fix bug #1070.
533 kes Fix Win32 reparse points. Bacula will not recurse into any
534 reparse point directory, including mount points, unless the
535 directory is explicitly mentioned at the top level (same as
536 with Unix). A file that is linked to another file will be
537 backed up -- much as Unix does for hardlinked files.
538 This fixes bug #1041.
540 kes Remove double quotes from ChangeLog and ReleaseNotes
541 kes Remove StorageId test when pruning and recycling (Eric's changes).
542 kes Remove old form of locking when getting volumes -- causes deadlock.
543 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
544 the name unique and to eliminate compile time error.
545 kes Add accurate.o to Win32 FD Makefile
547 kes Fix cats dll build on Win32 after db_update_job_end_record
548 calling sequence change.
549 ebl Switch to tokyo dbm instead of htable in accurate code
550 ebl Include tokyo dbm to bacula source tree
552 kes Fix buffer overruns detected by Coverity.
554 kes Tweak joblog display.
556 kes Implement --without-qwt
557 kes Fix layout of restore tree dialog
558 kes Add configure bat QWT libraries, so that bat can be built
559 with or without the QWT libaries.
561 ebl Add dummy tape driver for regression tests.
562 kes Make sure we unload the right slot when swapping.
564 kes Add debug times, reduce size of two-pool-changer test
566 ebl Tweak autoconf scripts for vtape
568 kes Improve SD reserve debug code.
569 kes Testing an improvement to free up volumes no longer in use.
571 kes Rework SD acquire for read to handle autochanger Volume
573 kes Implement regression that explicitly tests swapping a Volume
574 from one drive to another.
575 kes Enhance disk-changer to detect most error conditions.
576 kes Fix SD code so that it properly swaps a Volume between drives.
577 This fixes bug #1083.
579 kes Apply libdbi patch from Joao Freitas for regress and for
580 Bacula trunk. Regress now works with libdbi. Nice.
581 kes Apply .nobackup patch from bug #1077 submitted by
583 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
584 name into jobs cloned via the run directive.
586 kes Prevent a Volume that is being swapped from being freed from
587 the volume list. This will most likely fix, at least partially,
589 kes Fix strippath so that it does not get a buffer overrun and crash FD.
590 This fixes bug #1078.
591 kes Remove 50 millisec wait in SD that broke debugger.
592 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
593 that a job may run, counted from when the job was scheduled.
594 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
595 a job may block waiting for a resource, counted from when the job starts
596 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
597 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
598 that implements multiple commands per line in the console when using
599 readline. Modify the default to use a semicolon as the command separator.
601 ebl Fix SQL query in migration code.
602 ebl Make accurate mode with hash disk pass regression tests
604 ebl Implement first cut of accurate backup with hash disk.
606 kes Force unload of volume when wrong volume mounted in SD.
608 kes Fix bat seg fault at termination.
609 kes Add Bacula generated version to bat about box.
612 kes Experiment with allowing multiple read jobs.
613 kes Move final volume swapping code to DCR method and
614 call it from acquire_for_read().
615 kes When wrong volume is mounted during read, unload_autochanger.
617 kes Integrate the libdbi changes from Joao Henrique Freitas
619 kes Stop searching for Volumes in SD askdir if DIR returns the
620 same volume name twice in a row.
621 kes Close bat console windows first to eliminate error message
624 kes Tweak the swap Volume from one drive to another code so that
625 it now seems to work.
626 kes Resolve several problems with recycling that broke the new
627 code (these problems are in 2.2.9 as well).
628 kes Remove the volume lock when calling the sysop code.
629 kes Don't mark a reserved volume with no writers as unused otherwise
632 kes Rework class structures for VOLRES, DCR, and DEVICE to make
633 the method names a bit more logical, and for more logically
634 handling the responsibilities.
636 kes Remove redundant code in terminating the scheduler that just
637 causes a seg fault in many cases.
638 kes Cleanup releasing a volume and make it a DCR method.
639 kes Improve algorithm for detecting pre-reserved volume and
642 kes Tweak volume swapping code so it works.
643 kes Correct name overloading in mount.c
644 kes Replace released flag in VOLRES with reserved and add access
645 methods for the VOLRES class.
646 kes Prevent volume from being released while being swapped.
647 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
648 plugin that add %w (where) and %r (replace flag) editing to
650 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
652 kes Refactor parts of stored/mount.c
654 ebl Add sanity checks for VolWriteTime and VolReadTime
655 ebl Take care of bad clock changes while computing VolWriteTime
656 and VolReadTime. This should fix or limit #1066
657 kes Correct error string numbers in dird/catreq.c
658 kes Restructure reserving, acquiring, and mounting volumes. Calls to
659 autochanger are deferred for mount.c -- simplifes the code.
661 kes Do not prune any running job. It just fails the job.
662 kes Lock the volumes when changing dev->reserved_device and marking
663 the volume unused otherwise the device can get reserved by
664 another job before the volume is released, thus blocking it.
666 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
667 kes Fix bug #1063, reuse of freed ptr in list nextvol.
668 kes Release regex compile buffer in filed/job.c
669 kes Add proper type of const char in sql_create.c
670 kes Turn off debug in daemon termination routines
671 kes Move free_volume_list() before devices are freed in stored.c
672 kes Fix reference to uninitalized stack variables in bregex.c.
673 This should correct bug #1067.
675 kes Fix possible seg fault in SD when freeing a volume entry.
677 kes Implement unload_dev() before swap device.
678 ebl Add statistics prunning with option and menu
679 kes Separate unload_dev() from unload_other_device() in autochanger.c
681 kes Apply patch from bug #1069 that corrects spurious error messages
682 when ACLs enabled on SGI but no ACL exists.
683 ebl Fix small segfault in bacula-sd when debug level is 500
684 kes Modify run_program() and run_program_full_output() to use
685 call by reference for the results string. This corrects a long
686 standing problem where the address of the string may be changed
687 in the subroutine but not in the calling program.
689 kes Re-enable code to remember last volume mounted on a non-tape
691 kes Add patch supplied in bug #1068 that fixes a SD crash when using
692 a Virtual autochanger.
693 kes Generate correct JobMedia records during spooling/despooling when
694 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
695 <tih@hamartun.priv.no> for excellent analysis and testing.
697 kes Tweak hash algorithm for htable using Martin Simmons idea
698 for doing a circular shift.
699 kes Remember what volume is in VTLs (previously turned off for
701 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
702 pointed out some problems in creating JobMedia records during
703 spooling with concurrent jobs. Fix the problem by updating the
704 start file position before despooling and generate a jobmedia
705 record at the end of despooling.
707 kes Fix handling of JobMedia records during spooling and when a
708 Volume is changed without actually writing data to the Volume.
710 kes Rework certain SD locking based on gdb tracebacks of deadlocks
711 sent by Eric. This code now uses only the volume_lock() rather
712 than the reservations lock when at EOM and acquiring a new
714 kes Ensure only one exit point in several subroutines.
716 kes Implement bsock code to permit locking. Use the new code in Verify
717 in the FD to prevent the heartbeat thread from disrupting the Verify
718 data sent to the Dir.
719 kes Modify SD locking to eliminate locking the reservations system from
720 outside the system. Use the volume lock when getting media data
721 and reserving a new volume at end of media.
722 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
723 when SD starts are not locked into place.
725 kes Fix error compiling runscript code on 64 bit machines.
726 kes Tweak Win32 mount point code.
727 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
728 cleared giving bad file estimate).
729 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
732 kes Keep Schedule run lists in order as suggested by
735 kes Implement autostart scripts for Debian.
736 ebl Implement upgrade catalog scripts.
738 ebl Apply jobstat patch for long term statistics. Have to implement
739 purge stats command and upgrade scripts.
740 kes Fix mtx-changer.in for broken Debian mt program.
742 kes Fix large number of JobMedia records reported by Eric Bollengier.
744 kes Apply doc fix from bug #1062.
745 kes Resolve crash and improper restore wx-console Win32 restore
746 GUI. Fixes bug #1065.
747 kes Update Win32 wxWidgets to latest version.
748 kes Attempt to do correct handling of Win32 mount points. Should
750 kes Fix Win32 FD backup/restore memory leak due to improper termination
751 of BackupRead/Write. This fixes bug# 1038.
753 ebl Reduce memory usage for accurate backup, working only with ctime
754 and mtime. (not all Lstat field)
755 About 40MB for my Linux system (400.000 files)
757 kes Add dcr->reserved_volume flag that allows us to release a volume
758 even if it is not vol->released. This allows maxvol2 to work when
759 Volumes expire and we are already writing to the device (i.e. a
760 volume is pulled out from under us by another job terminating after
761 we reserve the drive).
763 ebl Permit multiple command/console per runscript definition.
764 RunScript { command = /bin/true ; command = /bin/false ... }
765 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
766 (restart an application) just after the VSS snapshot on windows.
767 kes Don't zap dcr values during release_volume() as they might
768 have the next Volume to be mounted.
769 kes Fix AIX prototype.
771 kes Second cut of drive switching during backup.
774 kes Update Win32 version of wxWidgets to most recent version.
775 kes Tweak Copy job details.
776 kes Rework dir_find_next_appendable_volume to make a bit more effort
777 to find a suitable volume before giving up.
779 kes Make ask_sysop_to_create... to return if waken from wait.
780 This helps get out of blocked conditions.
781 kes Experimental implementation of switch_device in reservations.
782 kes Implement FD version to allow easier protocol changes.
783 kes Add Plugin Options string -- not yet passed to FD.
784 kes Implement PluginOptions ACL.
786 kes Attempt to correct problems with restores with autochangers and
787 use counts going negative
788 kes Rework SD status command and implement API for bat. Implements
789 header, runing waitreservation, devices, volumes, spooling,
790 and terminated status keywords.
791 .status storage=xxx <keyword>
792 kes Clarify TLS error message by adding double quotes around name.
793 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
794 kes Pass jcr to tls routines so debug messages can be handled better.
795 kes Rework jobq resource allocation code, and possibly fix a bug
796 that caused reference counts to get out of sync.
798 kes Rename fd/dir plugin to use Bacula standard underscore.
799 kes Plugin work -- bring dir up to fd level.
800 kes Start implementation of VTL code
801 kes Fix Win32 build after adding new cats subroutine.
803 kes First cut at Duplicate Job implementation.
805 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
806 kes Start PluginOptions string, and refactor a bit of ua_run.c
807 ebl Apply Allan patch that permit to reset recyclepool.
809 kes Test patch -- possible fix or improvement for bug #1053
810 kes Refactor FD and SD status commands to permit new API code in
811 SD, and to fix Win32 build.
812 kes Win32 build is now working.
814 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
815 some ideas in patch from Scott Bailey.
816 kes Begin implementation of duplicate Job control.
817 kes Fix some of Win32 build after recent additions.
818 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
819 which causes the FD to detect whether or not the OS has the
820 honor no dump bit (*BSD systems), and if so, to skip backing up
821 any file with this bit set. The feature is enabled by setting
822 'honor no dump flag = yes' in the Options section of a FileSet.
824 kes Correct po warning message with datarootdir
825 kes Implement more code in dird.c to put configuration parsing in
826 a class rather than use globals.
827 kes Restructure SD status command for implementation of bat API
830 kes Suppress incorrect 'Will not descend from x into y' messages.
831 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
832 daemon globals used by parser.
833 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
835 kes Fix free of plugin_list when none exists.
837 ebl Apply accurate project patch.
839 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
840 on non-mempool object)
841 kes First cut of converting FD .status to work with bat API.
843 .status client=XXX header
844 .status client=XXX running
845 .status client=XXX terminated
846 kes Implement first cut of Copy Job.
847 kes Implement Catalog in Pool resource. It overrides catalog specified
848 in the Client resource.
850 kes Apply patch (with some difficulties) from Joao Henrique Freitas
851 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
853 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
854 ftruncate() actually works. In the case of some (cheap) NAS devices,
855 it does not, and so recycling NAS Volumes does not work. The code
856 simply unlink()s the file, then recreates it. This fixes bug #1011.
858 kes First incomplete cut of big malloc blocks for htable.
859 kes Tweak plugin code.
861 kes Plugin debug code + tweak a couple bat dialog layouts
863 kes Fix creating first JobMedia record during Migration to include
864 proper index. This caused slow restores of migrated jobs.
865 kes Temp fix to plugin name file_index.
866 kes Bacula backed up and restored a MySQL database.
868 kes Implement plugin restore.
869 kes Implement parsing of db_driver to give db_type index.
871 kes First cut of plugin restore code.
872 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
873 and do not strip paths on symbolic links.
874 kes Set catalog backup database and user name from values specified on
875 the ./configure line.
876 ebl Fix #1031 about wrong pool source information in job report.
879 kes Remove a redundant jcr argument to find_files, match_files, and
881 kes Implement '.status dir header|scheduled|running|terminated' that
882 prints the requested status section. With the exception of the
883 header, the other reports have fields separated by tabs (\t).
885 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
886 a resource embedded run command to find a since time if no explicit
887 since time was supplied on the command line.
888 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
889 that updates the state file at job termination time in addition to
890 when the daemon terminates.
892 kes First version where a plugin did a backup.
893 bpipe-fd.so created a backup file, wrote a test
894 string to it, and Bacua could restore this fabricated file.
896 kes Implement DB Driver = string for the DBI driver.
897 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
898 kes First cut of code for loading Win32 plugin dlls. Implement
899 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
900 and implement a dlfcn.h file based on opengroup's definitions of
903 kes First cut plugin directives.
905 kes Apply patch from bug #1049 to prevent stripping the path on a
907 kes Attempt to fix bug #1047 where stripping a path corrupts the
908 heap. Waiting for feedback.
909 kes Correct the Mount message not to suggest labeling a new tape
910 when doing a restore. Submitted by email by John Stoffel.
911 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
912 FD by using casting. Reported in bug #1042.
914 kes A bit of crypto cleanup. More later.
916 Release Version 2.2.8
918 kes Apply patch from Martin to correct bug #1040, bscan sets existing
920 kes Fixed important spelling error in doc -- bug #1045.
922 ebl Fix bextract to be able to extract non-portable Win32 data to
924 kes Move initialization of read/write res lock earlier in the code.
925 This fixes the crash with a null conf file. This fixes bug
927 kes Redefine CURES in lib/parse_conf to be URES and move it all
928 into lib/parse_conf.c -- this responds to bug #1042, but does
929 not fix it. The fix is not to compile with FORTIFY_SOURCE.
930 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
931 the trunk SVN. I don't think this was reported as a bug.
933 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
935 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
937 kes Add DataDespooling and DataCommitting status (committing is
938 the last despooling).
939 kes Finish implementation of new reservations code noted below.
941 kes Fix bsnprintf for float point numbers. I broke recently when
942 parameterizing some variables. This fixes bug #1036.
943 kes Undo recent reservations changes ... will apply them later
944 when they work better.
946 ebl Fixes #1034 which cause mysql to hang the connection after 8h
947 ebl Change default statistics target of filename.name and path.path
948 fields for PostgreSQL. This speeds lookup by indexes. Thanks
950 kes A few more tweaks to new reservation code. Make sure to clear
951 vol released flag when retaking volume. When reading label and
952 label is bad mark volume unused. When recycling, mark volume
953 unused so it can be renamed.
955 kes Fix reserve_volume() so it doesn't release a volume in use
956 (i.e. a volume entry not marked released). This should be
957 the last part needed to fix bug #1018.
959 kes Move Heartbeat documentation from Job to Director resource.
960 This fixes bug #1033.
962 kes Fix existing switch drive SD code to call autochanger to release
963 any old volume. This must be done to keep the autochanger from
964 releasing subsequently newly reserved volumes in doing a close().
965 This should fix bug #1018.
966 kes Fail if attempting to get console input in batch mode. This
967 should help fail RunScript console commands that are incomplete.
968 kes First cut implementing switch_drive() in SD (not actually called).
970 kes Implement first cut running console commands in a RunScript.
972 ebl Fixes bug #1028 where 'Selection Type' option was not usable
974 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
977 Release Version 2.2.7
979 kes Add new free_tls() entry point so that Win32 builds.
980 kes Fix compile warning in src/lib/util.c
981 kes Fix entry point for edit_job_codes() so that Win32 builds.
982 kes Fix seg fault Frank Sweetser reports in regression testing
983 on his systems. The problem was that the original author of
984 bsnprintf.c did not take into account the side effects of
985 using ++x in the argument to a #define.
986 kes Make SD protocol backward compatible with version 2.2.x.
988 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
989 because Bacula no longer restores sockets.
990 ebl Always use ignorecase fileset option on win32 FD.
992 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
993 that implements double quoting include names in conf files,
994 and also allows piping input by having the first character
995 be a vertical bar (|).
996 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
997 that implement %f in RunScripts to pass the FileSet name.
998 kes Skip leading | when lex input comes from a pipe as suggested
999 by Michael Stapelberg <michael@stapelberg.de>.
1001 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1002 Nerijus Baliunas <nerijus@users.sourceforge.net>
1004 kes Implement Plugin Directory and plugin events.
1006 kes Implement a security enhancement: TLS authentication but no
1007 encryption. Enabled by setting 'TLS Authentication = yes'.
1008 Note when this is on, TLS encryption is turned OFF!
1010 kes This patch corrects a problem where the maximum concurrent storage
1011 jobs counter gets out of sync during restore jobs causing jobs to
1012 'wait on max Storage jobs'. This patch fixes bug #1009.
1014 kes This patch fixes bcopy so that it produces correct Volumes.
1016 kes This patch eliminates spurious output to the console during a VerifyVolume
1017 job that contains encrypted data. It fixes bug #1024.
1019 kes This patch prevents the 'status dir' command from trying to use a scratch
1020 volume and possibly moving it from one pool to another. This patch fixes
1023 kes Add new include to postgresql.c suggested by Marc Cousins so
1024 that it compiles correctly with pgre version 8.3.
1026 kes Fix --archivedir addition to configure. Replace it with
1027 --with-archivedir in configure.in This fixes the regression
1029 kes This patch fixes bug #1012 where the job is canceled because
1030 of Max Run Time exceeded when the job has not yet started.
1032 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1033 one 'part' to write. Instead of each part being stored on disk,
1034 written to DVD, then deleted from disk, all parts are written to disk,
1035 and only the last is written and deleted from disk.
1036 kes This patch fixes the status command to include the formating string for
1037 JS_AttrInsterting. It fixes bug #1021.
1038 kes This patch should fix the Mac OS X build problem on the latest
1039 Darwin, where sys/types.h was not included correctly (apparently
1040 due to a change in the Mac headers). The solution was to explicitly
1041 ensure that it is defined for the ./configure.
1042 This patch also has a rebuild of configure that includes the Debian
1043 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1044 kes This patch should ensure that queued messages to the console are
1045 displayed as soon as possible. It should fix bug 1007, but has been
1046 reported not to work.
1048 kes This patch fixes the infinite loop when trying to increase the
1049 maximum number of volumes in a Pool during the add command.
1050 This patch fixes bug #1008.
1052 Release Version 2.2.6
1054 db Remove extra data on estimate command in joblist for bat.
1056 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1057 really change anything, but is the beginning of doing it *right*.
1058 To do it completely right the LastWritten date must be passed to
1059 the SD, but it is not yet done.
1060 kes Minor tweaks to some bat restore SQL.
1061 kes This patch fixes bug #1003 where putting the message output from
1062 a Verify job into the catalog results in a recursive loop. The problem
1063 seems to show up only with postgresql (to be verified).
1064 kes Correct %x to %p in postgresql debug statement.
1066 kes Fix bug #942 where lots of emails where generated when the heartbeat
1067 interval was low and Bacula wanted a different tape from the one in
1070 ebl Add new SD despooling attributes and Dir inserting attributes
1071 job status codes in the catalog (Status table).
1073 ebl Use qmake-qt4 instead of qmake when available (debian system).
1075 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1076 that passing the password via the command line (arg 3) is insecure.
1077 This responds to bug #990 (it doesn't fix it).
1079 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1080 kes Fix a crash in bat when it cannot connect to the Director for example
1081 if the Director is not running.
1082 kes Remove redundant INDEX (JobId) from File table in the trunk.
1083 This fixes bug #992.
1084 kes Make explicit exception to GPL in LICENSE to permit linking
1085 the Win32 FD with Microsoft VSS code.
1086 kes Apply the Solaris package patch from
1087 Masopust, Christian <christian.masopust@siemens.com>
1088 kes Apply the patch to optionally add a timestamp in the debug output
1089 submitted by Mariusz Czulada <manieq@wp.eu>.
1091 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1092 backend (sql_strerror). Fixes bug #989
1094 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1095 It applied with no problems.
1096 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1097 awk are on the path.
1098 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1099 since the status is returned on stderr on Solaris.
1100 kes Activate Close button on tray-monitor window. This fixes
1102 kes Check for NULL item in parse_conf.c before calling it. In the
1103 case of Device, there is no item and this caused a seg fault when
1104 Device appears in the conf file.
1105 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1106 avoids pulling in config.h multiple times in some new code.
1108 kes Fix spurious warning message printed when creating a volume with
1109 a LabelFormat. This fixes bug #976.
1111 Release Version 2.2.5
1113 kes Add JobId in place of Job name in all the Jmsg() output.
1114 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1116 kes Make maxvol-test and new more strict maxvol2-test work.
1117 kes Print JobId in all Jmsg() job output.
1119 kes Add new SD despooling attributes and Dir inserting attributes
1120 job status codes. This fixes bug 961.
1121 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1123 kes Fix doc issue. This fixes bug #963.
1124 kes Fix listing performance problems in bat. Pointed out by
1126 kes Remove old debug code.
1127 kes Fix bat code that tests for Win32. This should fix bug #968
1128 kes Query 5 list wrong Vol after migration. This fixes bug #960
1130 ebl Fix #969 where user can't change Replace option in restore menu.
1132 kes Save jcr in thread specific data (tsd) for each thread.
1133 kes Make Dmsg() print JobId as -%u.
1134 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1135 for the thread if it exists.
1136 kes Remove old reservation debug jid code.
1137 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1138 ebl Add an option that permit to specify spool size in job
1139 definition. (Applying patches/testing/spoolsize_per_job.patch).
1140 You must upgrade SD and DIR at the same time.
1141 dvl Add new configuration item --archivedir
1142 dvl Adjust regression tests to use tmp not /tmp. This will allow
1143 multiple concurrent runs of the regression tests.
1145 kes Fix race condition that drops final block written to volume.
1146 This happens in rare cases with multiple simultaneous jobs
1147 when the Volume fills. This fixes bug #964. May be related
1148 to bug #935 and possibly #903.
1149 kes Eliminate more strerror() and replace with bstrerror().
1150 kes Remove BSD getopt and replace with unrestricted IBM version.
1151 kes Fix Win32 build for changed calling sequences.
1152 kes More tweaks to the mount volume routines to get everything
1153 right. Changed variable name from find to have_vol, which is
1154 much easier to understand.
1155 kes Enhance btimer debug code.
1157 kes Fix FD->SD authorization failure, which was due to spurious
1158 wakeups from a pthread_cond_timedwait(). Simply check the
1159 predicate before continuing. This fixes bug #953.
1160 kes Add const char where needed (more to do). Remove temp debug code.
1162 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1163 kes Don't overwrite error message in check_tables_version.
1165 kes Unlock batch insert tables with same calls used elsewhere.
1166 kes Allow starting 59 jobs a second.
1167 kes Make SD session key more random.
1168 kes Add retry for SQLite opening db if it fails. Probably helps
1170 kes Suppress extra error messages during batch insert failure.
1172 kes Add jcr to timer packets so if killed message can be sent to job.
1173 kes Add JobId to all Dmsg() output.
1174 kes Put some FD auth code on dbglvl rather than fixed.
1175 kes Return insert attributes error message in db msg buffer to avoid
1176 false error messages. Helps fix bug #966.
1177 kes Separate batch init error messages. Probably helps fix bug #966.
1178 kes Make SD code that contructs attribute insert check string lengths
1180 kes If Dir gets an error during inserting attributes, cancel SD.
1181 This reduces unnecessary error messages.
1183 kes Correct search boolean for getting Volume info
1184 ebl Cleanup batch insert code. Probably fixes bug #965.
1185 kes Back out one small change to the reservation system (reserving a volume).
1186 kes Rework how a Volume is mounted. It is now much more intelligent and
1187 will always attempt to use any mounted volume if possible and reduces
1188 calls to the Director asking about volumes.
1190 kes Turn off some code when batch insert not enabled.
1191 kes Edit FD name in connect error messages.
1192 kes Rework the reservation system to take into account that the Director
1193 might give us a Volume that is different from the current one being
1194 used, and to ensure that we don't exceed Maximum Volume Jobs.
1195 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1196 fatal error with multiple jobs running'
1197 kes Add more debug code in reservation system.
1198 kes Implement maxvol-test to check bug #947.
1200 kes Add code to handle tray monitor separated from Win32 FD.
1201 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1203 kes Add missed return in fixing verify bug -- trunk only.
1204 ebl Fix a command parser issue causing a director segfault.
1205 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1206 This fixes bug #954.
1207 kes Increase the max block size to 4MB fixes bug #957.
1208 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1209 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1210 is not properly mounted (recognized) during a poll.
1211 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1212 Job that has differences reports Verify OK.
1213 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1215 ebl Add an option to operate on all pools with update vol parameters.
1216 This complete the project 20. Patch from Nigel Stepp.
1217 ebl Add history support to bconsole when using readline.
1218 Using Ctrl-D to exit doesn't update .bconsole_history
1219 kes Modify new volume algorithm to use max MediaId for generating next
1220 volume number rather than the count of Volumes. This should essentially
1221 eliminate the failure rate if some volumes were deleted. Bug #921.
1222 kes Begin implemention of Optimize Job Scheduling.
1223 kes Implement restore callback that Dirk and I agreed on for bat
1224 restore. This fixes bug #928. Restore of backup of zero files fails.
1225 kes Fix SQL Catalog logging which broke with new db_escape_string
1228 Release Version 2.2.4
1230 kes Fix bacula_cats.def for new db_escape_string().
1231 kes Increase size of name string when FD making connection to SD.
1232 May fix bug #953. FD->SD connection failure.
1234 kes Add code to help Dan debug 2drive-incremental-2disk test.
1235 kes Add code to try to fix bug #908.
1236 kes Add waits to multiple exit detection code to try to force pid
1237 file to always be deleted.
1238 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1239 This fixes bug #950.
1240 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1241 trying to switch drives by checking for blocking before unblocking.
1243 kes Cancel storage daemon in all cases where FD reports error. This
1244 should fix virtually all cases of bug #920.
1245 kes Fix db_escape_string() for MySQL which did not compile.
1247 kes Fix error message that was clobbered when Dir tells SD it does not
1248 have write permission on Volume. This should fix a minor point
1249 in bug #942, but not the main problem.
1250 kes Add code to cancel job in SD if FD connection fails. This should
1252 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1253 dvl Pass jcr and db into db_escape_string() to enable better escaping
1255 kes Fix migration code to get correct Volume name with multiple volumes
1256 by skipping |. Fixes bug #936.
1257 kes Implement patch supplied by Landon to fix bug #944 where using
1258 TLS with bconsole uses 99+% of the CPU.
1259 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1261 kes Move patches into patches directory.
1263 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1266 ebl Using 'm' in bconsole will show messages like before,
1267 and not memory usage.
1268 kes Fix bug #935, and probably also bug #903 where files were not
1269 restored. MediaId was not properly set in JobMedia record after
1272 kes Suppress chown and chmod error messages if the FD is not running
1275 kes Apply Martin Simmons' patch that should turn off the new API usage
1276 when batch insert is turned off allowing building on older
1278 kes Add ./configure search in qwt-qt4 for qwt package
1280 kes Bacula is now free of 3rd party GPL copyrighted code!
1281 kes Remove idcache.c
1282 kes Add guid_to_name.c/h which replace idcache.
1283 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1285 ebl Detect if new PosgreSQL batch insert API is present.
1286 kes Correct incorrect mempool call causing Director crash. Occurs on
1287 systems without va_copy().
1288 sb Update spec files for 2.2.1 release
1290 kes Fix memory pool call in ua_output.c. bug #934.
1291 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1292 Add test program to fnmatch.c
1294 kes Integrate patch to README.vc8 from
1295 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1296 edit it to get it into Unix patch format.
1297 kes Implement mkpath.c to replace old FSF makepath.c
1299 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1301 Release Version 2.2.1
1303 kes Update POTFILES.in
1304 kes Cleanup a few underquoted AC_DEFUNs in configure
1305 kes Apply patch from Martin Simmons that adds a test for va_copy to
1308 kes Fix bug #921 by increasing the number of tries to create a new volume
1310 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1311 can be called multiple times. Implement a version for machines
1312 without va_copy() that gets a big buffer.
1314 kes Integrate more portable zone offset code into bsmtp.c
1315 Submitted by Attila Fülöp.
1317 kes Fix bad SD->FD return status reported by
1318 (James Harper) <james.harper@bendigoit.com.au>
1319 ebl Fix a bug in read_close_session which return random status
1320 thanks to James Harper
1322 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1323 and directory names during restore of single file/directories.
1324 kes Add sanity checks to .sql command when string is empty. Hopefully
1325 that will resolve Dirks Director crash.
1327 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1328 in the bsmtp chat subroutine when debug is >= 10.
1330 kes Fix Director crash when running bat SQL queries.
1331 kes Add David's notes on Item 8: Copy pools.
1333 kes Rework projects file to be current and ready for a vote.
1334 kes Enhance lex scanner error message.
1336 kes Tweak LICENSE file to mention BSD code.
1337 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1338 if specified on the ./configure.
1339 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1340 This class is intended to allow us to open a second bsock to the
1341 Director while in the restore subdialog.
1343 kes Fix configure to create bat Makefile before creating dependencies.
1344 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1345 kes Add a tooltip to the tray monitor.
1346 dvl Set the Director's PID file before dropping privs. This fixes
1349 kes Update AUTHORs file
1350 kes Increase the default max concurrent jobs to 20 in FD and SD to
1351 correspond with the default .conf files.
1352 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1353 some different, of the same file created by RN when porting the
1355 kes Rearrange some of the Win32 directories and the placement of the files
1357 kes Set DEVELOPER flag in version.h
1359 ========================================================================
1360 Release Version 2.2.0
1362 kes Apply a second doc patch from Marc.
1363 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1364 improves the tips section that discusses how to setup multiple
1367 kes Update bat README file.
1368 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1369 corrects a typo in the Recycle status check in db_find_next_volume().
1370 This will probably fix a number of annoying problems with multiple
1372 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1373 bnet calls -- no functionality change.
1375 kes Modify the Verify output to specify if files are missing on
1376 the Volume(s) or disk. Fixes confusion in bug #916.
1377 kes When more than one Volume is read in a migration job, the last
1378 Volume bytes reported are from the last read volume rather than
1379 the last written volume. Fixed. This fixes bug #910.
1380 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1381 It previously printed New Recyle flag is: no. This fixes bug
1384 kes Correct seg fault when switching tape drives during restore.
1385 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1386 be used until after 2.2.0 release.
1388 kes Remove fnmatch() in SD that permitted wild card specifications.
1389 This fixes bug #914.
1391 kes Fix %g in filename returned by SQL for browse tree reported by
1393 kes Fix configure so that it puts config.out in the cwd rather than
1395 kes Attempt to fix the locking problem reported by Eric in bug #906.
1396 kes Make berrno class to leave errno unchanged after constructor call.
1397 kes Make bnet_server use the heap rather than the stack to allocate
1398 its socket fd pointers to avoid a crash at termination. Problem
1399 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1401 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1402 and putting it in depkgs-qt along with Qt4.3.
1404 kes Rework code in acquire.c that switches drives for reading when
1405 the Media Type does not match. This should fix bug #906
1407 ebl Fix a director segfault during job setup #907
1408 kes Correct seg fault in postgresql when first operation returns no
1409 rows. Fixes Dirks File browser problem seg fault with bat.
1411 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1412 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1415 kes Implement PopUp YES/NO dialog for bat.
1417 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1419 kes Correct RunScript to terminate job in FD on failure.
1420 kes Change abort_on_error and AbortJobOnError to fail_on_error
1421 and FailJobOnError in RunScripts.
1422 kes Minor tweaks of code formating in RunScripts, principally to
1423 avoid depassing 80 columns.
1425 kes Eliminate one #ifdef Win32 in bsmtp
1426 kes Implement grow tool to grow a file for testing very large databases.
1427 kes Add big-vol-test to test Bacula seeking with > 5GB.
1430 kes Modify find_next_volume() to return all values in Media record.
1431 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1435 kes Update Release notes
1437 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1438 Warning, in previous beta version, all media get from scratch keep their
1441 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1442 This should fix bug #842. Made a note to look at removing the temp
1443 files at the end of the install.
1444 kes Add ability to mount and unmount a file device providing it is
1445 marked as being removable and has the appropriate mount and unmount
1446 commands defined in the Device resource. This fixes bug #830.
1447 kes When applying a storage override, release all previous storage
1448 definitions rather than just prepending the new storage.
1449 This should prevent a good deal of confusion.
1451 kes Implement ./configure search for qwt libraries.
1453 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1454 Win32 FD. This should fix bug #893.
1455 kes Remove an unnecessary beep in Win32 init code.
1456 kes Update copyright dates in Win32 executable about boxes.
1457 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1458 code with a BSD getopt.c and getopt.h.
1459 kes Remove sched.h from the Win32 compat directory -- not used.
1460 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1461 need to shut it down, do it through the services panel or the command
1463 kes Remove some inappropriate Bacula FSFE copyrights.
1464 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1465 kes Fix regress config non-portable test as pointed out by
1466 Florian Heigl <florian.heigl@gmail.com>
1467 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1468 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1470 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1471 Reported by Frank Sweetser.
1475 kes Fix client-only build.
1476 kes Integrate client-only fixes for bsys (initgroups) and conio from
1477 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1478 kes Make arguments to get_scratch_volume() in same order as other
1480 kes Rework the prune_volumes() subroutine so that after purging and
1481 no volume found in desired pool, it will check for a scratch
1482 volume. This prevents recycling the whole scratch pool.
1483 kes Add code to status storage to print boffset_t (largefile support).
1485 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1486 kes You now need a --with-qwt=<dir> to be able to build bat.
1487 kes Update src/win32/cats/bacula_cats.def to include the new
1488 db_get_query_dbids() call on Win32.
1490 kes Correct a problem when selecting a scratch volume and moving
1491 it to another pool that lost some columns.
1492 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1493 kes Enhance Autochanger error messages to include Volume and device name.
1494 kes Rework prune_volumes() code to take account of InChanger flag,
1495 and to handle recycling volumes going to the Scratch pool and
1496 current pool because the RecyclePool directive.
1497 kes Implement a better and more efficient db_get_query_dbids() to
1498 handle creating and passing back a list of DBIds.
1502 kes Start work on new more efficient DBId subroutine. First use
1503 will be for recycling volume to Scratch inchanger.
1504 kes Increase number of JobIds in pruning from 1000 to 10000.
1505 This to be replaced by above routine.
1506 kes Begin implementation of building Qt4 on Win32.
1507 kes Correct typo in fix I added for bad TLS shutdown.
1508 kes Pull 2.0.3 patches into patches directory.
1509 kes Update Release notes. Include qt-console in line count.
1510 kes Update Projects file.
1512 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1513 bug in migration code where a job that spanned two volumes
1516 kes Implement new BST_DESPOOLING blocked state. Change from locking
1517 during despooling in SD to blocking. This means that other threads
1518 can work with the device structure, in particular the reservations
1519 system while despooling.
1521 kes Fix return in reservation message queue that missed clearing
1522 the jcr lock (implemented 26Jun07 below).
1523 kes Rename a number of dev methods to make locking function names
1525 kes Document locking in lock.c. Move lock structures to new file
1528 kes Move reservations message lock to lock jcr only this
1530 kes Move main SD locking code into lock.c (new file).
1531 kes Update Win32 build to include lock.c
1535 kes Dirk committed the qwt library code for drawing graphs in bat.
1536 kes Tweak install of qwt so that it is integrated with ./configure.
1538 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1539 out by Eric (my typo).
1540 ebl Fix configure.in to get batch mode enable
1541 kes Return correct string from authenticate.cpp in bat when connecting
1543 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1544 spurious line drops when using TLS.
1545 kes Do not file reparse points when restoring a file that already
1548 kes Implement Windows reparse points -- similar to directories, but
1549 we do not descend into it. This is a first cut. They seem to
1550 be backed up, but restore is not yet tested.
1551 kes Remove restore_blocking in tls code when shutting a socket to leave
1552 it in blocking mode. Hopefully this will fix the encryption bug
1553 reported by Frank Sweetser.
1554 kes When opening a file for backup, tell the OS that we are going to
1555 read it sequentially -- optimization.
1556 kes Change variable names in authenticate_director() to not conflict
1557 with member names in bat. Caused great confusion with compiler,
1560 kes Queue openssl error messages in case of comm problem.
1561 kes Do shutdown() call if socket terminated.
1562 kes Remove some duplicated code in tls.c
1563 kes Move more of the bsock member variables into private and access
1565 kes Add Frank Sweetser's tls-test to the regression suite.
1567 kes Add Swedish sv.po file
1569 kes Don't print clock skew message in FD if less than 3 seconds diff.
1570 kes Add a bit of VSS info to status client.
1571 kes Implement a first cut of Vista VSS, using Win2003 code.
1573 Release: 2.1.20 beta
1575 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1576 loaded tape but uses first drive).
1577 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1578 This was indeed a Win32 issue.
1580 kes Simplify search of autochanger for in-use Volume.
1581 kes Fix exit condition of check for in-use volume. kes Remove
1582 inappropriate my_postgresql_free_result() in db_close()
1584 kes Fix bad return in FD when encryption signature not found.
1585 Probably caused a crash.
1586 kes Inhibit missing encryption signature error messages for
1587 file types where no signature computed.
1588 kes Correct inverted check on autochanger in reservation system.
1589 kes Tweak debug code in autochanger reservation.
1591 kes Add some additional locking in the cats directory in subroutines
1592 that modify packet variables called from batch insert.
1593 kes Rework how dcrs are allocated. new_dcr() can now be called
1594 with an existing pointer, and it will simply clean it up.
1595 This allows the reservation system to test various different
1596 devices, and will permit easy device changes.
1597 kes A bunch of changes all over to handle new new_dcr() calling
1599 kes Work more on the Volume management in the SD. Remember Volumes
1600 for tape drives and for autochangers (even virtual disk changers).
1601 kes When looking at the Volume list to reserve a drive, handle
1602 autochanger names correctly by interating through the changer
1603 devices. Also call the Director to see if a Volume is suitable
1604 for the current job.
1605 kes Fix some bugs in bscan. Make sure all media records are written.
1606 Make sure that valid JobMedia records are written for disk files.
1607 Previously they were completely wrong.
1608 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1609 that the URLs don't change and so that the developers will all
1610 work off the same copy. Rebuild from scrach.
1611 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1613 Release: 2.1.18 beta
1615 kes Fix seg fault in FD from incorrect digest size.
1616 kes Fix argument to non-OpenSSL crypto.c subroutine.
1618 Release: 2.1.16 beta
1620 kes Remove a few malloc()s from the encryption code.
1621 kes Use the class calls to bsock in filed/backup.c and restore.c in
1622 place of the old bnet_xxx code.
1623 kes Implement code that does an on the fly calculation of the
1624 signing digest during restore of encrypted files. It makes
1625 a best guess at the algorithm, and if it is not correct, will
1626 then revert to the old code which reads the file after it is
1628 kes Implement at least one missing crypto stream in stream_to_ascii()
1629 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1630 #877 where a reload with bad syntax causes Dir to exit.
1632 Cut: 2.1.14 beta (not released)
1634 kes Do not free a volume on a tape drive until another volume is
1635 mounted and read, or the autochanger unloads the volume.
1636 This should help the SD re-use volumes that are already mounted,
1637 and should fix bug #886.
1638 kes Apply patch from user brettedgar that allows gnome2-console include
1639 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1640 kes Apply patch from Lucien Weller that fixes day of week calculation
1641 because of DST flag problem. Fixes bug #887.
1643 kes Move find_next_appendable_volume() to after acquiring a valid device
1644 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1646 kes Unable to reproduce bug 872. However added additional testing for
1648 kes Bug #874 resolved by documenting SQLite limitations.
1649 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1650 kes Bug #881 resolved by removing typo in mtx-changer script.
1651 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1652 approval. Added a link to the wiki on the web page, and implemented
1653 a backup from http://paramount.ind.wpi.edu
1655 kes Fix update allfrompool to pass pool name.
1657 kes Convert to pure GPL v2 license.
1658 kes Fix sscanf problems reported by Peter Buschman that caused
1659 a bus error on Solaris.
1660 kes Rework (simplify) the select prompt in bat.
1661 kes Move get_jobid_from_tid() into lib and create a
1663 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1664 should definitely fix the problem of lost error messages in the
1666 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1667 kes Eliminate tcpd.h from the project. Enclose the #include from the
1668 library with extern C ...
1669 kes Add print of signal name when a signal is trapped.
1671 Release: 2.1.12 beta
1673 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1675 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1676 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1677 makes SQLit3 run 30 times faster, though a bit less safe.
1678 kes Implement --with-batch-insert in configure and detection of thread
1679 safe libraries. It is on by default, but turned off if no thread
1680 safe library (e.g. SQLite 2) is available.
1682 kes Fix Bacula PostgreSQL buffer overruns.
1683 kes Do better checking for NULL results returned from PostgreSQL;
1684 implement retry for failed queries; clear results buffer after
1685 failed query. Hopefully this will correct the PostgreSQL failures.
1687 kes Implement algorithm to handle only one appendable volume with
1688 Prefer Mounted Volumes = no.
1689 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1690 returned from a query.
1691 kes Make volume lock recursive.
1692 kes Implement an additional volume reservation algorithm that
1693 starts by considering all reserved volumes then uses the
1694 old brute force algorithm of searching the resources to
1695 find a suitable device.
1696 kes Add new reservations debug code and refine the old code.
1697 kes Update the win32/dll/bacula.defs file.
1699 kes Tweak reservations algorithm to permit a few more cases, i.e.
1700 volume reserved, but on different drive, ...
1701 kes Enhance SD status to include Pool and Media Type for drive in a
1702 more readable format (a bit longer).
1703 kes Fix PostgreSQL double free.
1705 kes Minor refactoring of restore decryption code.
1706 kes Add code to smartall.c to detect double free of a buffer.
1708 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1709 so that bsmtp will create a correct email address (mailbox only).
1710 kes Modify 'memory' command so that the buffers are listed as 'In use'
1711 to avoid confusion with Orphaned buffers.
1712 kes I reworked the OpenSSL include/lib flags to be handled in
1713 the standard Bacula way, which should fix bug #863 concerning
1714 non-standard OpenSSL libraries.
1716 kes Implement Help Browser window for bat.
1717 kes Fix reload bug that reset StorageId to zero.
1719 kes Fix TLS #ifdefing when TLS turned off.
1720 kes Ensure that when labelling a tape with Slot=0 that InChanger
1722 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1724 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1725 add DISTINCT (required by PostgreSQL).
1726 kes Implement BSOCK authenticate_director() method. Eventually will
1727 authenicate all daemons.
1728 kes Move several more functions into the BSOCK class.
1730 kes Add code to tell the OS that we no longer need a cached
1731 file that we were reading. In findlib/bfile.c. Also,
1732 only cache files that we are reading. Thanks to
1733 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1734 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1735 kes Implement script to automatically generate cats and dll .def
1736 files for Win32 dll.
1737 kes Update README.mingw32 to include new .def file generation.
1738 kes Correct typo in UTF-8 error message as reported by:
1739 jhernandez <julianhernandez@gmail.com>
1740 kes Add additional sm_check() code on debug level 1.
1741 kes Set default debug level to 1.
1742 kes Trap SIGABRT in attempt to get traceback.
1744 kes Reduce bat connect timeout from 30 to 15 seconds.
1745 kes More restructuring and implementing BSOCK class in place of
1747 kes Remove a few unnecessary malloc() tests in crypto code.
1748 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1749 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1750 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1752 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1754 kes Fix Verify InitCatalog. The attributes were not pointing to the
1755 correct saved location.
1756 kes Implement message callback so that GUI is sure to get all
1757 daemon messages. Currently displayed in a dialog in bat.
1758 kes Ignore SIGUSR2 (Bacula timer) in bat.
1759 kes Apply regress patch from bug #859 to allow regress to work
1760 with Solaris compiler.
1762 kes Begin adding TLS support to bat.
1763 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1764 clean up lex.c and make it more readable.
1766 kes Move more bnet functions into the BSOCK class.
1767 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1768 kes Complete change of berrno strerror() method to bstrerror()
1770 Release: 2.1.10 beta
1772 kes Cleanup incorrect email addresses in bsmtp.
1773 kes Make bat display initial messages rather than discard them.
1775 kes First cut of adding .mod to the run command.
1776 kes Implement auto display of messages in bat.
1777 kes Enhanced preferences to allow all Bacula output to be
1780 kes Try to make bsmtp date routines more generic.
1781 kes Fixed bug #856 autochanger documentation.
1782 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1783 kes Add new cats entry point so Win32 builds.
1785 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1787 kes Do better checking for the MySQL 64 bit libraries looking for both
1788 .a and .so libraries.
1789 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1790 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1791 kes Require the thread safe version of MySQL during configure. Thanks
1792 to Andre Noll for pointing this out.
1793 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1794 continuing in migration code.
1795 kes Apply implementation of tray-monitor font derived from gnome-console
1796 submitted by Andreas Piesk <a.piesk@gmx.net>
1798 kes Eliminate important memory loss in SQLite
1799 kes Fixed the batch insert MySQL thread specific data that was not
1800 being freed. See cats/mysql.c:db_thread_cleanup().
1801 kes Fix restore before command.
1802 kes Convert old hdr.name to name() in a few places.
1803 kes Implement update jobid command.
1804 kes Return all time_t dates in db_get_job_record()
1805 kes Stop watchdog in SD earlier.
1806 kes Put Pool just after Storage in please mount message.
1807 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1810 kes Update the po files.
1811 kes Fix Verify InitCatalog by making it cache attributes.
1813 kes Change name bacula-bat to bat for man 1 page to correspond to
1815 kes Check for client and store NULL pointers in status command. This
1817 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1818 kes Fix sign extended editing of %p.
1819 kes Clean out a little old #ifdefing in cats/mysql.c
1821 kes If time diff between DIR and FD is more than 600 seconds convert
1822 INFO message to WARNING.
1823 kes Implement heap size display in status for all daemons.
1824 kes Attempt to fix MySQL db open memory loss (not successfull).
1825 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1826 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1827 Query. This looks like a MySQL but but by doing extra releases,
1828 the memory goes away. This should fix bug #847.
1830 kes When backup fails, cancel SD before waiting for sd termination.
1831 kes If SD is waiting for FD to connect during cancel, wake up the
1833 kes Fix fsf code so that errno is correctly reported.
1834 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1836 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1837 so that Bacula doesn't later stumble into a seg fault.
1838 kes Use the term Restore Client in the restore Job report.
1839 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1840 the original job's FileSetId.
1841 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1842 spooling in migration jobs. Not yet tested.
1843 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1844 reading conf file from a pipe. However, do it with open_bpipe()
1845 rather than popen. Not yet tested.
1847 kes Fix an ugly bug where the VolCatBytes were getting updated
1849 kes Implement bconsole memory command that prints current memory
1850 usage, plus smartalloc dump.
1851 kes Clarify some error messages in backup, admin, and migrate.
1852 kes Shrink label dialog to smaller size.
1853 kes Invert Cancel OK buttons on restore to be OK Cancel.
1854 kes More strerror() to bstrerror() conversions.
1856 kes Start implementing bstrerror() in place of strerror().
1857 kes Stripping path -- seems to work.
1859 kes Prevent door and port files from being restored (mostly
1861 kes Free an unreleased buffer in compat code.
1862 kes Change console Job name from *Console* to -Console- to eliminate
1863 Win32 filename problems. Put Win32 path separator when creating
1864 Console file. This fixes bug #846.
1865 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1867 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1869 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1870 to force Win32 error message.
1872 kes First cut strip path. The data should be passed to the FD,
1873 but nothing is done with it yet.
1874 kes Enhance the digest and signature routines in the crypto
1875 library to accept a JCR and to use it to print error messages
1876 so that they will go in the Job report rather than the daemon's
1878 kes Simplify some of the verify signature code.
1879 kes Simplify a few of the alternative returns in the signature
1882 ebl Use only POSIX regex instead of GNU regex in breg.c for
1883 File relocation. It fix broken freebsd compilation.
1884 kes Convert all other Dir files to use new ua class message
1886 kes Tentative fix for missing digest signature in bug 807.
1887 kes Correct handle problem in new win32_ftruncate routine.
1888 kes Convert ua_purge.c and ua_update.c to use new ua class
1889 message routines for bat.
1891 kes Correct incorrect installation of LICENSE in Win32 installer.
1892 kes Display LICENSE at the beginning of the Win32 install.
1893 kes Attempt to correct the need for the png files to be installed
1895 kes Reapply my bat.conf install script in qt-console. I think I
1896 editted bat.pro instead of bat.pro.in and it was lost.
1897 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1898 the /var/lock/subsys for subsysdir. Also corrects typos in the
1901 kes First cut update job.
1902 kes Correct configure to include qmake of src/qt-console directory.
1904 kes Make restore job yes/mod/no print in one command so GUI works.
1905 kes First cut implementing backup and restore client.
1906 kes Correct editing in Verify output that caused a seg fault.
1908 kes Insure that bat.conf is not overwritten during installation.
1909 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1910 while I was implementing migration in March 2006 !
1912 ebl Cleanup file relocation, using char *RegexWhere instead of
1913 char *where + bool where_use_regexp
1914 kes Update some manpages and add bat manpage.
1915 kes Make a first cut at converting bacula.spec.in for bwx-console
1917 kes Apply patch from John Goerzen to add hostname as fourth argument
1918 to make_catalog_backup script.
1919 kes Fix typos I introduced into bsmtp.c
1920 kes Make pm_strxxx() routines handle input of NULL pointer. This
1921 is to protect from NULL pointers returned from SQL databases.
1922 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1923 kes Add more debug to FIFO code -- fix fifo regression test.
1925 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1926 kes Add thread timer to bnet_connect() to break from OS if wait time
1929 kes Update Win32 build to include new files, new symbols, and
1931 kes Implement socket level heartbeat (tcp_keepidle)
1932 ebl Commit File relocation patch
1933 kes Make bat have 'make install' target.
1934 kes Warn during install if old gnome-console binary found.
1935 kes Warn during install if old wx-console binary found.
1936 kes Add -8 option to bsmtp command line to add content type utf-8.
1937 Fixes bug #809. (Character coding problem in bsmtp).
1938 kes If < is found in target (from, to, cc) then do not enclose the
1939 target in < > in bsmtp. Fixes bug #772 (malformed address).
1940 kes When printing certain items in dbcheck, stop after 300000.
1941 Fixes bug #822. (dbcheck loops).
1942 kes Incorrect status in Dir after waiting for mount with poll set.
1945 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1947 kes Print waiting to reserve a device every 5 mins.
1949 kes Don't call close_part in label.c if tape and relabel.
1950 kes Don't free volume if busy in close() -- should help with
1952 ebl Fix #824 RunScript bug (After script could be execute twice)
1953 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1954 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1955 Add a regression script to test RunScript
1957 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1960 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1961 deprecated. No additional bugs will be fixed, and they will be dropped
1962 in a future release (probably 2.4.0).
1963 kes Change name of wx-console to bwx-console to make it more Bacula
1965 kes Change the name of gnome-console to bgnome-console to make it
1968 kes Some time in March, a Feature Request with patch from Jorj Bauer
1969 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1971 The ability for the director to validate a Client (FD) CN against
1972 an arbitrary set of patterns rather than the hostname, with
1973 A new 'TLS Allowed CN' set of directives which are implemented
1974 in the Client resource. Then pattern matching is used in place
1975 of hostname matching against the Certificate's CN. As an example, we
1976 have certificates which (a) use a local CA, and (b) have a CN of the
1978 kes Add new/changed entry points to Win32 build
1979 kes Create unaccepted-projects for projects that are not accepted.
1980 kes Simplify locking in the reservations system.
1981 kes Add more debug code in reservations.
1982 kes Make sure error condition on reserving a volume is handled correctly.
1983 kes Correct handling of volume_in_use.
1984 kes Correct handling of initializing a device.
1985 kes Move handling of broadcasting releasing a device into release_device().
1986 kes Correct attaching dcr to dev so that it is only done if device
1987 is properly initiated.
1989 kes Locking debug level tweaks in SD.
1990 kes Tweak new Volume code.
1992 kes Add exec external-command [wait-seconds] to bconsole. This
1993 executes the external-command. Note! normally external-command
1994 should be enclosed in double quotes.
1995 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1996 it should normally be off in a production system.
1998 kes Implement die command for SD so that we can force it to dump.
1999 kes Implement SD lock debug code.
2000 kes Implement new algorithm for keeping Volume list in SD. It
2001 is now owned by the device.
2003 kes Implement new code for freeing in use volumes that should
2004 resolve if not all, some of the problems of multiple drive
2005 tape conflicts described in bug 801.
2007 kes Fix gui/bacula-web/images files in svn.
2008 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2010 ebl Fix a bug in batch mode (in string escape)
2011 kes Correct migration prune SQL typo that crept in in a
2012 recent 2.1.x change.
2014 kes Move bnet_despool() into class in bsock.c
2015 kes Modify job report to include director name and Build OS.
2016 kes Move drop root privilege and check_catalog() before fork.
2017 kes Add update database scripts (version 9 to 10) to updatedb directory.
2019 ebl Check size and age of each file after its backup to see if
2020 it has changed during backup, if 'checkfilechanges' is set.
2021 The FD will do an extra check (stat(2)) after
2022 each file backup. mtime, ctime and size are compared with
2023 'before backup' information. If time or size mismatch, an
2024 error message will be generated. You must upgrade FD to use it.
2026 kes Make database name and user configurable
2027 --with-db-name=xxx --with-db-user=xxx
2028 kes Add back database type to message.c for debugging.
2030 kes Implement dir_sql() which issues an SQL query.
2031 kes Modify bat medialist to use dir_sql() and do some minor C++
2032 formatting as well as eliminating a number of pointers, simplifing
2035 kes Fix some of the mtx-changer grep commands for tape label readers.
2036 kes Convert a number of bsendmsg into the appropriate send/warning/error
2037 message class calls.
2038 kes Suppress the using database message in the .sql command.
2039 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2041 kes Add context menu for floating a window.
2042 kes Some minor cleanup and name changes in qt-console
2043 kes Add doing mt setblk 0 in Win32 mtx-changer.
2044 kes Apply Martin's bug fix to move definition of ENODATA for
2046 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2047 sqlite2 and sqlite3.
2049 kes More pruning cleanup.
2050 kes Turn on wait_for_drive by default in mtx-changer.
2051 kes Turn on Batch insert code by default as it now passes regression.
2052 kes Add ./configure --enable-bat to enable building of Bat.
2053 No install yet though.
2055 kes Implement a new .sql command for bat.
2056 kes Implement code to turn off pruning in obtaining the next volume.
2057 Pruning is turned off for the status dir command, but turned on
2058 for SD requests and for the list nextvolume command.
2060 kes Correct Qmsg() that was not updated correctly when committing a
2061 previous change (probably the recent TLS patch).
2063 kes Write new subroutine is_volume_purged() that explicitly checks
2064 if the Volume is purged, and if so marks it as such. This should
2065 resolve problems reported about needing to mount twice to recycle
2067 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2068 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2069 amount of duplicated code.
2070 kes Do volume pruning only for the Media Type desired (reduces pruning time
2071 if multiple Media Types are in the same pool).
2072 kes Implement more detailed info in the Job report for the Bacula version
2074 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2076 ebl Add bbatch tool to bench database and insert mode.
2077 Fix sql quote stuff in batch mode
2078 Fix sql stuff for mysql
2080 kes Correct problems with am/pm scheduling. Fixes bug #808.
2081 kes Implement new prunning code that prunes up to 1000 jobs at
2082 the same time. The same technique can be applied to a number
2083 of other prune/purge subroutines.
2084 kes Add an insanity check when starting a new tape job to ensure
2085 that the tape position has not been changed. If so fail the
2087 kes Fix Win32 build for dlls to add the folllowing:
2088 src/lib/bsock.c -- new file with new entry points
2089 src/lib/dlist.c -- new entry points
2090 src/cats/sql_create.c -- new entry point
2091 src/cats/sql_cmds.c -- new DATA item exported
2093 ebl batch mode cleanup bscan-test is ok now.
2094 kes Implement SD code to check length of disk volume before appending.
2096 kes Correct return status on db_batch... routines.
2097 kes Add call to db_write_batch_file_records() to migration code.
2098 ebl Fix AfterJob timing
2099 kes Move the checking of the database in initializion of the Director
2100 to after we drop privileges. This avoids the need for both root
2101 and bacula access to the DB.
2102 kes Correct a misplaced variable definition in src/filed/backup.c
2103 kes Correct how the new batch insert db_create_attributes_record()
2104 uses the arguments. Caused a seg fault in bscan.
2105 kes Implement lock() and unlock() methods in DEVICE class.
2106 Implement block() and set_block(xx) methods in DEVICE class.
2107 kes Modify bnet_connect() so that it uses time() to check for the
2108 wait time expiring (on some OSes, some system calls may not
2109 return immediately).
2110 kes Modify Verify to obtain the previous JobId when it is actually
2111 running rather than at schedule time (as it was in 1.38.x).
2112 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2114 kes When checking pid in pid file, continue running if the pid is
2115 the same as ours. This occurs on IRIX after a system crash.
2118 kes Extend new GUI API.
2119 kes Make the ua structure a class, and implement send_msg(),
2120 error_msg(), warning_msg(), and info_msg().
2122 kes Apply fix from for building wx-console on the Mac from
2124 kes Implement new select mechanism for GUI programs.
2125 kes Reorganize initialization of stackedWidgets in bat.
2127 kes Add updated nagios plugin supplied by Christian Masopust.
2129 kes More bat implementation.
2130 kes File migrate bug with Pool Occupancy using mediaid instead
2131 of jobids. Fixes bug #795.
2132 kes Fix orphaned buffers in filed backup and verify due to
2133 crypto buffers not freed during errors. Fixes bug #789.
2134 kes Extend new GUI api code to tree commands.
2135 kes Ensure that tree and dot commands check console ACLs.
2136 kes Permit marking directory with trailing slash.
2137 kes Allow 20 console connections (instead of only 10).
2139 kes Add smartctl call to bacula-sd.conf as an example of getting
2142 kes Modify jobq.c to let simultaneous restore jobs run. This may
2143 cause them to fail if they cannot get a drive.
2144 kes Add Client Connect Wait to Storage daemon to permit users to
2145 modify the time the SD waits for a FD connection.
2147 kes Correct virtual changer check which was backwards. This caused
2148 volumes to be unloaded into slots already occupied.
2150 kes Apply Command ACL filter to JobId list in restore command.
2151 kes Correct typeo in var.c patch.
2153 kes Don't let Bacula prune File or Job records for the current Job.
2154 kes Fix variable substitution pad + inc bug reported (with patch)
2157 kes Correct SQLite log table index as reported by Luca Berra.
2159 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2161 kes Begin implementing new comm signals for API.
2162 kes Fix a few places in lib/message.c where the open fd may
2164 kes Continue implementing lib/bsock.c (real class). Make jcr,
2165 who, host, and port private. There are new methods to access
2166 them for non-class use. This required touching a number of files.
2168 kes Add LANG=C to autoconf/randpass so it works with languages other
2169 than English. Fixes bug #788.
2171 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2173 You will not be able to generate Include/Exclude list any more.
2174 It will be fixed soon.
2175 If you want to use this, you can apply
2176 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2178 kes Restore of sockets created false error messages because Bacula
2179 no longer restores sockets, but the code was still trying to
2180 set the attributes on a non-existent file. Reported by a user.
2181 ebl finish RecyclePool feature
2182 Media will takes Pool.RecyclePool
2183 when moving from Scratch to a Pool or when user will do
2184 update volume=xxx frompool
2185 To use it, add RecyclePool = aPool to your Pool resource
2188 RecyclePool = Scratch
2192 kes Expand new BSOCK class adding signal() and new BNET signals.
2193 kes Begin enhancing the dot commands adding a new API function
2194 that returns more information and will make it easier
2195 to interface to the Director from a program.
2197 kes Make DEVICE fd private. Its new name is m_fd, and can be
2198 obtained with dev->fd() outside the class. This is the
2199 first of many DEVICE members to be made private.
2200 kes Implement Michael Renner's idea on having a virtual disk
2201 changer. I made some minor modifications (e.g. I did not
2202 implement the Virtual Changer directive, but simply set
2203 the Changer Command to an empty string.
2205 kes Implement a BSOCK send() method that writes the whole record
2206 in a single write() request rather than in two.
2207 ebl add update volume=xxx recyclepool=yyyy
2208 volume takes recyclepool from pool when using update volume=xxx from pool
2210 kes Fix encryption deblocking bug, which caused some restored files
2211 to be truncated. This fixes bug #763.
2212 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2213 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2215 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2216 ebl Use btime_t instead of uint64_t in media patch.
2218 kes Optimize the use of the database a bit in the Status dir command.
2219 Only open it when needed, ensure that if any previous database
2220 was opened, it is closed.
2222 kes Correct VolCatBytes bug from media patch.
2223 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2224 in the case of orphaned records.
2225 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2226 and File records in 300K chunks to be more efficient. This
2227 idea came from Juan Luis Frances (if I remember right).
2228 kes Apply Eric's scratch patch that moves a purged Volume to
2229 the RecyclePool. Question: how is RecyclePool set? what
2230 happens to the ScratchPool?
2231 kes Apply Eric's media patch that collects read/write media
2232 times as well as byte counts. This patch requires a
2233 simultaneous upgrade of the DIR and SD. Note, there
2234 should be some way to turn off timing. I'm not sure
2235 times are in Bacula units.
2236 kes Apply Eric's batch-insert patch.
2238 kes Update projects list.
2240 kes Implement Include/Exclude file lists in FD as dlists using
2241 the new dlistString class. This permits efficiently having
2242 large include/exclude lists and completes project Item 25.
2243 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2244 console is authorized to cancel the job. This fixes bug
2246 kes Modify SD so that the VolCatJobs medium record is updated
2247 at the beginning of a Job rather than the end. This
2248 fixes bug #775 where exceeding MaxVolJobs caused jobs
2250 kes Added a mutex around getting and setting Volume information
2251 so that multiple simultaneous jobs will single thread.
2253 Switch to using Subversion
2254 kes Remove src/pygtk-console/ from configure
2256 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2257 plus the entrypoints.
2258 kes Apply patch supplied that corrects debug print
2259 in canceling jobs for max run time. Supplied as
2260 part of bug #621, which was previously fixed.
2262 kes Test on job_canceled() and sd_msg_thread_done inside
2263 loop starting the message thread to avoid a race condition.
2265 kes Remove rl_catch_signal from console.c as it conflicted
2266 with the header definition. Fixes bug #765.
2267 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2269 kes Clarify some stored/acquire messages to indicate if the
2270 problem is with read or append.
2272 kes Fix memory leak with storage ids in cats/sql_get.c
2273 kes Terminate watchdog earlier to avoid reference to released
2274 memory -- reported by Jason Austin.
2275 kes Move closing the database from jobq.c to the director daemon
2276 termination routine. This fixes memory leaks for shadow jobs
2277 (i.e. migration jobs).
2278 kes Free up the unique jobid chain items in migrate.c. This fixes
2279 a memory leak problem.
2280 kes Convert some ugly looking for statements to use foreach_alist
2281 in findlib/find.c. This will facilitate converting the structures
2282 to use dlist (for large include/exclude lists).
2283 kes Fix a bug in the btree.c and btree.h routines, then rename them
2284 rblist and add them to be built in src/lib. Include some new
2285 methods written by Rudolf Cejka that make the code more readable
2286 (hides some of the ugly casting).
2287 kes Add set_next() and set_prev() methods which make the code much more
2288 readable. Also add a new dlistString class that facilitates storing
2289 strings in dlists. To be used in the large include/exclude lists.
2290 kes Make some trivial modifications to lib/tree.h that use rblist
2291 rather than dlist for storing the tree links. This was suggested
2292 by Rudolf Cejka. The result of this is that the restore tree now
2293 uses red-black binary trees rather than simple linked lists. This
2294 should give rather dramatic speed improvements for directories
2295 contining large numbers of directories/files (more than 10000).
2297 kes Fix maxruntime bug #621.
2299 ebl Implement the include JobID in spool file name project.
2300 kes Reorder projects file in order determined by Jan 2007 vote.
2301 kes Implement item #12 on project list -- quick release of FD by
2303 kes Fix open of SQLite3 db where user does not have write permission
2304 so that DIR does not crash. Fixes bug #761.
2306 kes Add back missing @ in Win32 Makefile.
2307 kes Change 'Device not configured to autolabel' from INFO
2309 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2310 which should restart an indefinite # of times.
2311 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2312 other DIR specifications.
2314 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2315 Fix path quoting in SQLite scripts.
2316 Fix problems with SHGetFolderPath.
2318 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2320 kes Fix Job restart on error bug that promotes an Inc to a Full
2321 backup. This should fix bug #755.
2322 kes Add qt-console and first cut of code.
2326 kes Fix Bacula->Documentation link on Win32 to point to index.html
2327 instead of bacula.html. Fixed bug #750.
2328 kes Return JobId in db_get_job_record() when JobId==0. This should
2330 kes Do not release source pointers when restarting a failed job.
2332 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2333 This *should* fix bug #747.
2334 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2337 kes Modify USTORE constructor to set an empty store_source string,
2338 and don't copy the store_source string in a cancel. Hopefully
2339 this will fix Arno's seg fault, bug #744.
2340 kes Add back code to disable conio in configure. Fixes bug #743.
2341 kes Correct the Options scanner in the FD to correctly handle
2342 SHA1 option, which was eating the next option. Reported by
2344 kes Add code to indicate when the SD is spooling, spool wait, and
2345 despooling as requested by Alan Brown.
2347 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob