1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Update faketape driver.
30 ebl Modify faketape driver to avoid sparse file.
31 kes Add make clean of qt-source directory during ./configure
32 kes Store last block number written to tape in DEVICE and
33 use it for testing for correct last block on EOT.
35 Release Version 2.4.0:
39 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
42 kes Add create_postgresql_database.sql to Win32 installer. Should
43 fix problem reported by Juilio Monteiro.
44 kes Get correct slot when auto unloading a device. This fixes bug
47 kes Fix multiple media restore.
48 kes Make DEVICE Slot private and access it via a method.
49 Allows better control over when it is set and cleared.
50 kes Fix possible seg fault if SQL error.
52 kes Add Martin's fixes to argument scanning for the estimate
53 command. This fixes bug #1093.
54 kes Add debug code to SD.
55 kes Fix renaming a Volume, which used the wrong Volume name.
57 kes If operator has rewind tape, print warning, release tape and
58 try once more. If tape is positioned somewhere, something went
59 wrong, so mark the tape in error and try once more. Previously
60 this error was fatal, now it produces an error message.
61 kes Ensure correct volume name displayed during restore
62 kes Ensure that Volume is mounted for restore.
64 kes Fix a few more Coverity reported problems.
66 kes Apply Allan Black's status dir job count patch.
67 ebl Add information about IMPORT/EXPORT slots in mtx-script.
68 kes Enhance a couple of SD debug messages.
69 kes Tweak unload flag setting and ensure it is set during swap.
71 ebl Fix #1091 about bad output in estimate command.
73 kes Modify autochanger locking to attempt to avoid race
75 kes Make sure device not busy before doing label command.
76 kes Display open() errors except when polling. Previously too
77 many were suppressed. This should fix bug #1070.
78 kes Fix Win32 reparse points. Bacula will not recurse into any
79 reparse point directory, including mount points, unless the
80 directory is explicitly mentioned at the top level (same as
81 with Unix). A file that is linked to another file will be
82 backed up -- much as Unix does for hardlinked files.
85 kes Remove double quotes from ChangeLog and ReleaseNotes
86 kes Remove StorageId test when pruning and recycling (Eric's changes).
87 kes Remove old form of locking when getting volumes -- causes deadlock.
88 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
89 the name unique and to eliminate compile time error.
90 kes Add accurate.o to Win32 FD Makefile
92 kes Fix cats dll build on Win32 after db_update_job_end_record
93 calling sequence change.
94 ebl Switch to tokyo dbm instead of htable in accurate code
95 ebl Include tokyo dbm to bacula source tree
97 kes Fix buffer overruns detected by Coverity.
99 kes Tweak joblog display.
101 kes Implement --without-qwt
102 kes Fix layout of restore tree dialog
103 kes Add configure bat QWT libraries, so that bat can be built
104 with or without the QWT libaries.
106 ebl Add dummy tape driver for regression tests.
107 kes Make sure we unload the right slot when swapping.
109 kes Add debug times, reduce size of two-pool-changer test
111 ebl Tweak autoconf scripts for faketape
113 kes Improve SD reserve debug code.
114 kes Testing an improvement to free up volumes no longer in use.
116 kes Rework SD acquire for read to handle autochanger Volume
118 kes Implement regression that explicitly tests swapping a Volume
119 from one drive to another.
120 kes Enhance disk-changer to detect most error conditions.
121 kes Fix SD code so that it properly swaps a Volume between drives.
122 This fixes bug #1083.
124 kes Apply libdbi patch from Joao Freitas for regress and for
125 Bacula trunk. Regress now works with libdbi. Nice.
126 kes Apply .nobackup patch from bug #1077 submitted by
128 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
129 name into jobs cloned via the run directive.
131 kes Prevent a Volume that is being swapped from being freed from
132 the volume list. This will most likely fix, at least partially,
134 kes Fix strippath so that it does not get a buffer overrun and crash FD.
135 This fixes bug #1078.
136 kes Remove 50 millisec wait in SD that broke debugger.
137 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
138 that a job may run, counted from when the job was scheduled.
139 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
140 a job may block waiting for a resource, counted from when the job starts
141 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
142 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
143 that implements multiple commands per line in the console when using
144 readline. Modify the default to use a semicolon as the command separator.
146 ebl Fix SQL query in migration code.
147 ebl Make accurate mode with hash disk pass regression tests
149 ebl Implement first cut of accurate backup with hash disk.
151 kes Force unload of volume when wrong volume mounted in SD.
153 kes Fix bat seg fault at termination.
154 kes Add Bacula generated version to bat about box.
157 kes Experiment with allowing multiple read jobs.
158 kes Move final volume swapping code to DCR method and
159 call it from acquire_for_read().
160 kes When wrong volume is mounted during read, unload_autochanger.
162 kes Integrate the libdbi changes from Joao Henrique Freitas
164 kes Stop searching for Volumes in SD askdir if DIR returns the
165 same volume name twice in a row.
166 kes Close bat console windows first to eliminate error message
169 kes Tweak the swap Volume from one drive to another code so that
170 it now seems to work.
171 kes Resolve several problems with recycling that broke the new
172 code (these problems are in 2.2.9 as well).
173 kes Remove the volume lock when calling the sysop code.
174 kes Don't mark a reserved volume with no writers as unused otherwise
177 kes Rework class structures for VOLRES, DCR, and DEVICE to make
178 the method names a bit more logical, and for more logically
179 handling the responsibilities.
181 kes Remove redundant code in terminating the scheduler that just
182 causes a seg fault in many cases.
183 kes Cleanup releasing a volume and make it a DCR method.
184 kes Improve algorithm for detecting pre-reserved volume and
187 kes Tweak volume swapping code so it works.
188 kes Correct name overloading in mount.c
189 kes Replace released flag in VOLRES with reserved and add access
190 methods for the VOLRES class.
191 kes Prevent volume from being released while being swapped.
192 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
194 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
196 kes Refactor parts of stored/mount.c
198 ebl Add sanity checks for VolWriteTime and VolReadTime
199 ebl Take care of bad clock changes while computing VolWriteTime
200 and VolReadTime. This should fix or limit #1066
201 kes Correct error string numbers in dird/catreq.c
202 kes Restructure reserving, acquiring, and mounting volumes. Calls to
203 autochanger are deferred for mount.c -- simplifes the code.
205 kes Do not prune any running job. It just fails the job.
206 kes Lock the volumes when changing dev->reserved_device and marking
207 the volume unused otherwise the device can get reserved by
208 another job before the volume is released, thus blocking it.
210 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
211 kes Fix bug #1063, reuse of freed ptr in list nextvol.
212 kes Release regex compile buffer in filed/job.c
213 kes Add proper type of const char in sql_create.c
214 kes Turn off debug in daemon termination routines
215 kes Move free_volume_list() before devices are freed in stored.c
216 kes Fix reference to uninitalized stack variables in bregex.c.
217 This should correct bug #1067.
219 kes Fix possible seg fault in SD when freeing a volume entry.
221 kes Implement unload_dev() before swap device.
222 ebl Add statistics prunning with option and menu
223 kes Separate unload_dev() from unload_other_device() in autochanger.c
225 kes Apply patch from bug #1069 that corrects spurious error messages
226 when ACLs enabled on SGI but no ACL exists.
227 ebl Fix small segfault in bacula-sd when debug level is 500
228 kes Modify run_program() and run_program_full_output() to use
229 call by reference for the results string. This corrects a long
230 standing problem where the address of the string may be changed
231 in the subroutine but not in the calling program.
233 kes Re-enable code to remember last volume mounted on a non-tape
235 kes Add patch supplied in bug #1068 that fixes a SD crash when using
236 a Virtual autochanger.
237 kes Generate correct JobMedia records during spooling/despooling when
238 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
239 <tih@hamartun.priv.no> for excellent analysis and testing.
241 kes Tweak hash algorithm for htable using Martin Simmons idea
242 for doing a circular shift.
243 kes Remember what volume is in VTLs (previously turned off for
245 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
246 pointed out some problems in creating JobMedia records during
247 spooling with concurrent jobs. Fix the problem by updating the
248 start file position before despooling and generate a jobmedia
249 record at the end of despooling.
251 kes Fix handling of JobMedia records during spooling and when a
252 Volume is changed without actually writing data to the Volume.
254 kes Rework certain SD locking based on gdb tracebacks of deadlocks
255 sent by Eric. This code now uses only the volume_lock() rather
256 than the reservations lock when at EOM and acquiring a new
258 kes Ensure only one exit point in several subroutines.
260 kes Implement bsock code to permit locking. Use the new code in Verify
261 in the FD to prevent the heartbeat thread from disrupting the Verify
262 data sent to the Dir.
263 kes Modify SD locking to eliminate locking the reservations system from
264 outside the system. Use the volume lock when getting media data
265 and reserving a new volume at end of media.
266 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
267 when SD starts are not locked into place.
269 kes Fix error compiling runscript code on 64 bit machines.
270 kes Tweak Win32 mount point code.
271 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
272 cleared giving bad file estimate).
273 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
276 kes Keep Schedule run lists in order as suggested by
279 kes Implement autostart scripts for Debian.
280 ebl Implement upgrade catalog scripts.
282 ebl Apply jobstat patch for long term statistics. Have to implement
283 purge stats command and upgrade scripts.
284 kes Fix mtx-changer.in for broken Debian mt program.
286 kes Fix large number of JobMedia records reported by Eric Bollengier.
288 kes Apply doc fix from bug #1062.
289 kes Resolve crash and improper restore wx-console Win32 restore
290 GUI. Fixes bug #1065.
291 kes Update Win32 wxWidgets to latest version.
292 kes Attempt to do correct handling of Win32 mount points. Should
294 kes Fix Win32 FD backup/restore memory leak due to improper termination
295 of BackupRead/Write. This fixes bug# 1038.
297 ebl Reduce memory usage for accurate backup, working only with ctime
298 and mtime. (not all Lstat field)
299 About 40MB for my linux system (400.000 files)
301 kes Add dcr->reserved_volume flag that allows us to release a volume
302 even if it is not vol->released. This allows maxvol2 to work when
303 Volumes expire and we are already writing to the device (i.e. a
304 volume is pulled out from under us by another job terminating after
305 we reserve the drive).
307 ebl Permit multiple command/console per runscript definition.
308 RunScript { command = /bin/true ; command = /bin/false ... }
309 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
310 (restart an application) just after the VSS snapshot on windows.
311 kes Don't zap dcr values during release_volume() as they might
312 have the next Volume to be mounted.
313 kes Fix AIX prototype.
315 kes Second cut of drive switching during backup.
318 kes Update Win32 version of wxWidgets to most recent version.
319 kes Tweak Copy job details.
320 kes Rework dir_find_next_appendable_volume to make a bit more effort
321 to find a suitable volume before giving up.
323 kes Make ask_sysop_to_create... to return if waken from wait.
324 This helps get out of blocked conditions.
325 kes Experimental implementation of switch_device in reservations.
326 kes Implement FD version to allow easier protocol changes.
327 kes Add Plugin Options string -- not yet passed to FD.
328 kes Implement PluginOptions ACL.
330 kes Attempt to correct problems with restores with autochangers and
331 use counts going negative
332 kes Rework SD status command and implement API for bat. Implements
333 header, runing waitreservation, devices, volumes, spooling,
334 and terminated status keywords.
335 .status storage=xxx <keyword>
336 kes Clarify TLS error message by adding double quotes around name.
337 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
338 kes Pass jcr to tls routines so debug messages can be handled better.
339 kes Rework jobq resource allocation code, and possibly fix a bug
340 that caused reference counts to get out of sync.
342 kes Rename fd/dir plugin to use Bacula standard underscore.
343 kes Plugin work -- bring dir up to fd level.
344 kes Start implementation of VTL code
345 kes Fix Win32 build after adding new cats subroutine.
347 kes First cut at Duplicate Job implementation.
349 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
350 kes Start PluginOptions string, and refactor a bit of ua_run.c
351 ebl Apply Allan patch that permit to reset recyclepool.
353 kes Test patch -- possible fix or improvement for bug #1053
354 kes Refactor FD and SD status commands to permit new API code in
355 SD, and to fix Win32 build.
356 kes Win32 build is now working.
358 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
359 some ideas in patch from Scott Bailey.
360 kes Begin implementation of duplicate Job control.
361 kes Fix some of Win32 build after recent additions.
362 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
363 which causes the FD to detect whether or not the OS has the
364 honor no dump bit (*BSD systems), and if so, to skip backing up
365 any file with this bit set. The feature is enabled by setting
366 'honor no dump flag = yes' in the Options section of a FileSet.
368 kes Correct po warning message with datarootdir
369 kes Implement more code in dird.c to put configuration parsing in
370 a class rather than use globals.
371 kes Restructure SD status command for implementation of bat API
374 kes Suppress incorrect 'Will not descend from x into y' messages.
375 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
376 daemon globals used by parser.
377 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
379 kes Fix free of plugin_list when none exists.
381 ebl Apply accurate project patch.
383 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
384 on non-mempool object)
385 kes First cut of converting FD .status to work with bat API.
387 .status client=XXX header
388 .status client=XXX running
389 .status client=XXX terminated
390 kes Implement first cut of Copy Job.
391 kes Implement Catalog in Pool resource. It overrides catalog specified
392 in the Client resource.
394 kes Apply patch (with some difficulties) from Joao Henrique Freitas
395 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
397 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
398 ftruncate() actually works. In the case of some (cheap) NAS devices,
399 it does not, and so recycling NAS Volumes does not work. The code
400 simply unlink()s the file, then recreates it. This fixes bug #1011.
402 kes First incomplete cut of big malloc blocks for htable.
403 kes Tweak plugin code.
405 kes Plugin debug code + tweak a couple bat dialog layouts
407 kes Fix creating first JobMedia record during Migration to include
408 proper index. This caused slow restores of migrated jobs.
409 kes Temp fix to plugin name file_index.
410 kes Bacula backed up and restored a MySQL database.
412 kes Implement plugin restore.
413 kes Implement parsing of db_driver to give db_type index.
415 kes First cut of plugin restore code.
416 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
417 and do not strip paths on symbolic links.
418 kes Set catalog backup database and user name from values specified on
419 the ./configure line.
420 ebl Fix #1031 about wrong pool source information in job report.
423 kes Remove a redundant jcr argument to find_files, match_files, and
425 kes Implement '.status dir header|scheduled|running|terminated' that
426 prints the requested status section. With the exception of the
427 header, the other reports have fields separated by tabs (\t).
429 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
430 a resource embedded run command to find a since time if no explicit
431 since time was supplied on the command line.
432 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
433 that updates the state file at job termination time in addition to
434 when the daemon terminates.
436 kes First version where a plugin did a backup.
437 bpipe-fd.so created a backup file, wrote a test
438 string to it, and Bacua could restore this fabricated file.
440 kes Implement DB Driver = string for the DBI driver.
441 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
442 kes First cut of code for loading Win32 plugin dlls. Implement
443 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
444 and implement a dlfcn.h file based on opengroup's definitions of
447 kes First cut plugin directives.
449 kes Apply patch from bug #1049 to prevent stripping the path on a
451 kes Attempt to fix bug #1047 where stripping a path corrupts the
452 heap. Waiting for feedback.
453 kes Correct the Mount message not to suggest labeling a new tape
454 when doing a restore. Submitted by email by John Stoffel.
455 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
456 FD by using casting. Reported in bug #1042.
458 kes A bit of crypto cleanup. More later.
460 Release Version 2.2.8
462 kes Apply patch from Martin to correct bug #1040, bscan sets existing
464 kes Fixed important spelling error in doc -- bug #1045.
466 ebl Fix bextract to be able to extract non-portable Win32 data to
468 kes Move initialization of read/write res lock earlier in the code.
469 This fixes the crash with a null conf file. This fixes bug
471 kes Redefine CURES in lib/parse_conf to be URES and move it all
472 into lib/parse_conf.c -- this responds to bug #1042, but does
473 not fix it. The fix is not to compile with FORTIFY_SOURCE.
474 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
475 the trunk SVN. I don't think this was reported as a bug.
477 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
479 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
481 kes Add DataDespooling and DataCommitting status (committing is
482 the last despooling).
483 kes Finish implementation of new reservations code noted below.
485 kes Fix bsnprintf for float point numbers. I broke recently when
486 parameterizing some variables. This fixes bug #1036.
487 kes Undo recent reservations changes ... will apply them later
488 when they work better.
490 ebl Fixes #1034 which cause mysql to hang the connection after 8h
491 ebl Change default statistics target of filename.name and path.path
492 fields for PostgreSQL. This speeds lookup by indexes. Thanks
494 kes A few more tweaks to new reservation code. Make sure to clear
495 vol released flag when retaking volume. When reading label and
496 label is bad mark volume unused. When recycling, mark volume
497 unused so it can be renamed.
499 kes Fix reserve_volume() so it doesn't release a volume in use
500 (i.e. a volume entry not marked released). This should be
501 the last part needed to fix bug #1018.
503 kes Move Heartbeat documentation from Job to Director resource.
504 This fixes bug #1033.
506 kes Fix existing switch drive SD code to call autochanger to release
507 any old volume. This must be done to keep the autochanger from
508 releasing subsequently newly reserved volumes in doing a close().
509 This should fix bug #1018.
510 kes Fail if attempting to get console input in batch mode. This
511 should help fail RunScript console commands that are incomplete.
512 kes First cut implementing switch_drive() in SD (not actually called).
514 kes Implement first cut running console commands in a RunScript.
516 ebl Fixes bug #1028 where 'Selection Type' option was not usable
518 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
521 Release Version 2.2.7
523 kes Add new free_tls() entry point so that Win32 builds.
524 kes Fix compile warning in src/lib/util.c
525 kes Fix entry point for edit_job_codes() so that Win32 builds.
526 kes Fix seg fault Frank Sweetser reports in regression testing
527 on his systems. The problem was that the original author of
528 bsnprintf.c did not take into account the side effects of
529 using ++x in the argument to a #define.
530 kes Make SD protocol backward compatible with version 2.2.x.
532 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
533 because Bacula no longer restores sockets.
534 ebl Always use ignorecase fileset option on win32 FD.
536 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
537 that implements double quoting include names in conf files,
538 and also allows piping input by having the first character
539 be a vertical bar (|).
540 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
541 that implement %f in RunScripts to pass the FileSet name.
542 kes Skip leading | when lex input comes from a pipe as suggested
543 by Michael Stapelberg <michael@stapelberg.de>.
545 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
546 Nerijus Baliunas <nerijus@users.sourceforge.net>
548 kes Implement Plugin Directory and plugin events.
550 kes Implement a security enhancement: TLS authentication but no
551 encryption. Enabled by setting 'TLS Authentication = yes'.
552 Note when this is on, TLS encryption is turned OFF!
554 kes This patch corrects a problem where the maximum concurrent storage
555 jobs counter gets out of sync during restore jobs causing jobs to
556 'wait on max Storage jobs'. This patch fixes bug #1009.
558 kes This patch fixes bcopy so that it produces correct Volumes.
560 kes This patch eliminates spurious output to the console during a VerifyVolume
561 job that contains encrypted data. It fixes bug #1024.
563 kes This patch prevents the 'status dir' command from trying to use a scratch
564 volume and possibly moving it from one pool to another. This patch fixes
567 kes Add new include to postgresql.c suggested by Marc Cousins so
568 that it compiles correctly with pgre version 8.3.
570 kes Fix --archivedir addition to configure. Replace it with
571 --with-archivedir in configure.in This fixes the regression
573 kes This patch fixes bug #1012 where the job is canceled because
574 of Max Run Time exceeded when the job has not yet started.
576 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
577 one 'part' to write. Instead of each part being stored on disk,
578 written to DVD, then deleted from disk, all parts are written to disk,
579 and only the last is written and deleted from disk.
580 kes This patch fixes the status command to include the formating string for
581 JS_AttrInsterting. It fixes bug #1021.
582 kes This patch should fix the Mac OS X build problem on the latest
583 Darwin, where sys/types.h was not included correctly (apparently
584 due to a change in the Mac headers). The solution was to explicitly
585 ensure that it is defined for the ./configure.
586 This patch also has a rebuild of configure that includes the Debian
587 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
588 kes This patch should ensure that queued messages to the console are
589 displayed as soon as possible. It should fix bug 1007, but has been
590 reported not to work.
592 kes This patch fixes the infinite loop when trying to increase the
593 maximum number of volumes in a Pool during the add command.
594 This patch fixes bug #1008.
596 Release Version 2.2.6
598 db Remove extra data on estimate command in joblist for bat.
600 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
601 really change anything, but is the beginning of doing it *right*.
602 To do it completely right the LastWritten date must be passed to
603 the SD, but it is not yet done.
604 kes Minor tweaks to some bat restore SQL.
605 kes This patch fixes bug #1003 where putting the message output from
606 a Verify job into the catalog results in a recursive loop. The problem
607 seems to show up only with postgresql (to be verified).
608 kes Correct %x to %p in postgresql debug statement.
610 kes Fix bug #942 where lots of emails where generated when the heartbeat
611 interval was low and Bacula wanted a different tape from the one in
614 ebl Add new SD despooling attributes and Dir inserting attributes
615 job status codes in the catalog (Status table).
617 ebl Use qmake-qt4 instead of qmake when available (debian system).
619 kes Add a security warning to src/cats/make_catalog_backup.in indicating
620 that passing the password via the command line (arg 3) is insecure.
621 This responds to bug #990 (it doesn't fix it).
623 kes Set default debug_level to zero. This corrects bugs #991 and #993.
624 kes Fix a crash in bat when it cannot connect to the Director for example
625 if the Director is not running.
626 kes Remove redundant INDEX (JobId) from File table in the trunk.
628 kes Make explicit exception to GPL in LICENSE to permit linking
629 the Win32 FD with Microsoft VSS code.
630 kes Apply the Solaris package patch from
631 Masopust, Christian <christian.masopust@siemens.com>
632 kes Apply the patch to optionally add a timestamp in the debug output
633 submitted by Mariusz Czulada <manieq@wp.eu>.
635 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
636 backend (sql_strerror). Fixes bug #989
638 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
639 It applied with no problems.
640 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
642 kes Redirect stderror to stdin on mt status command in mtx-changer.in
643 since the status is returned on stderr on Solaris.
644 kes Activate Close button on tray-monitor window. This fixes
646 kes Check for NULL item in parse_conf.c before calling it. In the
647 case of Device, there is no item and this caused a seg fault when
648 Device appears in the conf file.
649 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
650 avoids pulling in config.h multiple times in some new code.
652 kes Fix spurious warning message printed when creating a volume with
653 a LabelFormat. This fixes bug #976.
655 Release Version 2.2.5
657 kes Add JobId in place of Job name in all the Jmsg() output.
658 kes Correct the APP_DESC for the Win32 storage service (remove an e).
660 kes Make maxvol-test and new more strict maxvol2-test work.
661 kes Print JobId in all Jmsg() job output.
663 kes Add new SD despooling attributes and Dir inserting attributes
664 job status codes. This fixes bug 961.
665 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
667 kes Fix doc issue. This fixes bug #963.
668 kes Fix listing performance problems in bat. Pointed out by
670 kes Remove old debug code.
671 kes Fix bat code that tests for Win32. This should fix bug #968
672 kes Query 5 list wrong Vol after migration. This fixes bug #960
674 ebl Fix #969 where user can't change Replace option in restore menu.
676 kes Save jcr in thread specific data (tsd) for each thread.
677 kes Make Dmsg() print JobId as -%u.
678 kes Make Jmsg, Emsg, and others automatically pickup the jobid
679 for the thread if it exists.
680 kes Remove old reservation debug jid code.
681 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
682 ebl Add an option that permit to specify spool size in job
683 definition. (Applying patches/testing/spoolsize_per_job.patch).
684 You must upgrade SD and DIR at the same time.
685 dvl Add new configuration item --archivedir
686 dvl Adjust regression tests to use tmp not /tmp. This will allow
687 multiple concurrent runs of the regression tests.
689 kes Fix race condition that drops final block written to volume.
690 This happens in rare cases with multiple simultaneous jobs
691 when the Volume fills. This fixes bug #964. May be related
692 to bug #935 and possibly #903.
693 kes Eliminate more strerror() and replace with bstrerror().
694 kes Remove BSD getopt and replace with unrestricted IBM version.
695 kes Fix Win32 build for changed calling sequences.
696 kes More tweaks to the mount volume routines to get everything
697 right. Changed variable name from find to have_vol, which is
698 much easier to understand.
699 kes Enhance btimer debug code.
701 kes Fix FD->SD authorization failure, which was due to spurious
702 wakeups from a pthread_cond_timedwait(). Simply check the
703 predicate before continuing. This fixes bug #953.
704 kes Add const char where needed (more to do). Remove temp debug code.
706 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
707 kes Don't overwrite error message in check_tables_version.
709 kes Unlock batch insert tables with same calls used elsewhere.
710 kes Allow starting 59 jobs a second.
711 kes Make SD session key more random.
712 kes Add retry for SQLite opening db if it fails. Probably helps
714 kes Suppress extra error messages during batch insert failure.
716 kes Add jcr to timer packets so if killed message can be sent to job.
717 kes Add JobId to all Dmsg() output.
718 kes Put some FD auth code on dbglvl rather than fixed.
719 kes Return insert attributes error message in db msg buffer to avoid
720 false error messages. Helps fix bug #966.
721 kes Separate batch init error messages. Probably helps fix bug #966.
722 kes Make SD code that contructs attribute insert check string lengths
724 kes If Dir gets an error during inserting attributes, cancel SD.
725 This reduces unnecessary error messages.
727 kes Correct search boolean for getting Volume info
728 ebl Cleanup batch insert code. Probably fixes bug #965.
729 kes Back out one small change to the reservation system (reserving a volume).
730 kes Rework how a Volume is mounted. It is now much more intelligent and
731 will always attempt to use any mounted volume if possible and reduces
732 calls to the Director asking about volumes.
734 kes Turn off some code when batch insert not enabled.
735 kes Edit FD name in connect error messages.
736 kes Rework the reservation system to take into account that the Director
737 might give us a Volume that is different from the current one being
738 used, and to ensure that we don't exceed Maximum Volume Jobs.
739 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
740 fatal error with multiple jobs running'
741 kes Add more debug code in reservation system.
742 kes Implement maxvol-test to check bug #947.
744 kes Add code to handle tray monitor separated from Win32 FD.
745 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
747 kes Add missed return in fixing verify bug -- trunk only.
748 ebl Fix a command parser issue causing a director segfault.
749 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
751 kes Increase the max block size to 4MB fixes bug #957.
752 kes ERABT if user sets min block size > max block size. Fixes bug #956.
753 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
754 is not properly mounted (recognized) during a poll.
755 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
756 Job that has differences reports Verify OK.
757 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
759 ebl Add an option to operate on all pools with update vol parameters.
760 This complete the project 20. Patch from Nigel Stepp.
761 ebl Add history support to bconsole when using readline.
762 Using Ctrl-D to exit doesn't update .bconsole_history
763 kes Modify new volume algorithm to use max MediaId for generating next
764 volume number rather than the count of Volumes. This should essentially
765 eliminate the failure rate if some volumes were deleted. Bug #921.
766 kes Begin implemention of Optimize Job Scheduling.
767 kes Implement restore callback that Dirk and I agreed on for bat
768 restore. This fixes bug #928. Restore of backup of zero files fails.
769 kes Fix SQL Catalog logging which broke with new db_escape_string
772 Release Version 2.2.4
774 kes Fix bacula_cats.def for new db_escape_string().
775 kes Increase size of name string when FD making connection to SD.
776 May fix bug #953. FD->SD connection failure.
778 kes Add code to help Dan debug 2drive-incremental-2disk test.
779 kes Add code to try to fix bug #908.
780 kes Add waits to multiple exit detection code to try to force pid
781 file to always be deleted.
782 kes Restore good dev.tar.gz to rescue set appropriate binary property.
784 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
785 trying to switch drives by checking for blocking before unblocking.
787 kes Cancel storage daemon in all cases where FD reports error. This
788 should fix virtually all cases of bug #920.
789 kes Fix db_escape_string() for MySQL which did not compile.
791 kes Fix error message that was clobbered when Dir tells SD it does not
792 have write permission on Volume. This should fix a minor point
793 in bug #942, but not the main problem.
794 kes Add code to cancel job in SD if FD connection fails. This should
796 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
797 dvl Pass jcr and db into db_escape_string() to enable better escaping
799 kes Fix migration code to get correct Volume name with multiple volumes
800 by skipping |. Fixes bug #936.
801 kes Implement patch supplied by Landon to fix bug #944 where using
802 TLS with bconsole uses 99+% of the CPU.
803 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
805 kes Move patches into patches directory.
807 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
810 ebl Using 'm' in bconsole will show messages like before,
811 and not memory usage.
812 kes Fix bug #935, and probably also bug #903 where files were not
813 restored. MediaId was not properly set in JobMedia record after
816 kes Suppress chown and chmod error messages if the FD is not running
819 kes Apply Martin Simmons' patch that should turn off the new API usage
820 when batch insert is turned off allowing building on older
822 kes Add ./configure search in qwt-qt4 for qwt package
824 kes Bacula is now free of 3rd party GPL copyrighted code!
826 kes Add guid_to_name.c/h which replace idcache.
827 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
829 ebl Detect if new PosgreSQL batch insert API is present.
830 kes Correct incorrect mempool call causing Director crash. Occurs on
831 systems without va_copy().
832 sb Update spec files for 2.2.1 release
834 kes Fix memory pool call in ua_output.c. bug #934.
835 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
836 Add test program to fnmatch.c
838 kes Integrate patch to README.vc8 from
839 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
840 edit it to get it into Unix patch format.
841 kes Implement mkpath.c to replace old FSF makepath.c
843 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
845 Release Version 2.2.1
847 kes Update POTFILES.in
848 kes Cleanup a few underquoted AC_DEFUNs in configure
849 kes Apply patch from Martin Simmons that adds a test for va_copy to
852 kes Fix bug #921 by increasing the number of tries to create a new volume
854 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
855 can be called multiple times. Implement a version for machines
856 without va_copy() that gets a big buffer.
858 kes Integrate more portable zone offset code into bsmtp.c
859 Submitted by Attila Fülöp.
861 kes Fix bad SD->FD return status reported by
862 (James Harper) <james.harper@bendigoit.com.au>
863 ebl Fix a bug in read_close_session which return random status
864 thanks to James Harper
866 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
867 and directory names during restore of single file/directories.
868 kes Add sanity checks to .sql command when string is empty. Hopefully
869 that will resolve Dirks Director crash.
871 kes Apply patch submitted by Martin Simmons that corrects a seg fault
872 in the bsmtp chat subroutine when debug is >= 10.
874 kes Fix Director crash when running bat SQL queries.
875 kes Add David's notes on Item 8: Copy pools.
877 kes Rework projects file to be current and ready for a vote.
878 kes Enhance lex scanner error message.
880 kes Tweak LICENSE file to mention BSD code.
881 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
882 if specified on the ./configure.
883 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
884 This class is intended to allow us to open a second bsock to the
885 Director while in the restore subdialog.
887 kes Fix configure to create bat Makefile before creating dependencies.
888 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
889 kes Add a tooltip to the tray monitor.
890 dvl Set the Director's PID file before dropping privs. This fixes
893 kes Update AUTHORs file
894 kes Increase the default max concurrent jobs to 20 in FD and SD to
895 correspond with the default .conf files.
896 kes Rewrite the Win32 service routines. This eliminates the 3 copies
897 some different, of the same file created by RN when porting the
899 kes Rearrange some of the Win32 directories and the placement of the files
901 kes Set DEVELOPER flag in version.h
903 ========================================================================
904 Release Version 2.2.0
906 kes Apply a second doc patch from Marc.
907 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
908 improves the tips section that discusses how to setup multiple
911 kes Update bat README file.
912 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
913 corrects a typo in the Recycle status check in db_find_next_volume().
914 This will probably fix a number of annoying problems with multiple
916 kes Modify most of dird/msgchan.c to use bsock class calls rather than
917 bnet calls -- no functionality change.
919 kes Modify the Verify output to specify if files are missing on
920 the Volume(s) or disk. Fixes confusion in bug #916.
921 kes When more than one Volume is read in a migration job, the last
922 Volume bytes reported are from the last read volume rather than
923 the last written volume. Fixed. This fixes bug #910.
924 kes Fix display of Recycle flag after update volume=foo recycle=yes.
925 It previously printed New Recyle flag is: no. This fixes bug
928 kes Correct seg fault when switching tape drives during restore.
929 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
930 be used until after 2.2.0 release.
932 kes Remove fnmatch() in SD that permitted wild card specifications.
935 kes Fix %g in filename returned by SQL for browse tree reported by
937 kes Fix configure so that it puts config.out in the cwd rather than
939 kes Attempt to fix the locking problem reported by Eric in bug #906.
940 kes Make berrno class to leave errno unchanged after constructor call.
941 kes Make bnet_server use the heap rather than the stack to allocate
942 its socket fd pointers to avoid a crash at termination. Problem
943 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
945 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
946 and putting it in depkgs-qt along with Qt4.3.
948 kes Rework code in acquire.c that switches drives for reading when
949 the Media Type does not match. This should fix bug #906
951 ebl Fix a director segfault during job setup #907
952 kes Correct seg fault in postgresql when first operation returns no
953 rows. Fixes Dirks File browser problem seg fault with bat.
955 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
956 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
959 kes Implement PopUp YES/NO dialog for bat.
961 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
963 kes Correct RunScript to terminate job in FD on failure.
964 kes Change abort_on_error and AbortJobOnError to fail_on_error
965 and FailJobOnError in RunScripts.
966 kes Minor tweaks of code formating in RunScripts, principally to
967 avoid depassing 80 columns.
969 kes Eliminate one #ifdef Win32 in bsmtp
970 kes Implement grow tool to grow a file for testing very large databases.
971 kes Add big-vol-test to test Bacula seeking with > 5GB.
974 kes Modify find_next_volume() to return all values in Media record.
975 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
979 kes Update Release notes
981 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
982 Warning, in previous beta version, all media get from scratch keep their
985 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
986 This should fix bug #842. Made a note to look at removing the temp
987 files at the end of the install.
988 kes Add ability to mount and unmount a file device providing it is
989 marked as being removable and has the appropriate mount and unmount
990 commands defined in the Device resource. This fixes bug #830.
991 kes When applying a storage override, release all previous storage
992 definitions rather than just prepending the new storage.
993 This should prevent a good deal of confusion.
995 kes Implement ./configure search for qwt libraries.
997 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
998 Win32 FD. This should fix bug #893.
999 kes Remove an unnecessary beep in Win32 init code.
1000 kes Update copyright dates in Win32 executable about boxes.
1001 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1002 code with a BSD getopt.c and getopt.h.
1003 kes Remove sched.h from the Win32 compat directory -- not used.
1004 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1005 need to shut it down, do it through the services panel or the command
1007 kes Remove some inappropriate Bacula FSFE copyrights.
1008 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1009 kes Fix regress config non-portable test as pointed out by
1010 Florian Heigl <florian.heigl@gmail.com>
1011 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1012 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1014 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1015 Reported by Frank Sweetser.
1019 kes Fix client-only build.
1020 kes Integrate client-only fixes for bsys (initgroups) and conio from
1021 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1022 kes Make arguments to get_scratch_volume() in same order as other
1024 kes Rework the prune_volumes() subroutine so that after purging and
1025 no volume found in desired pool, it will check for a scratch
1026 volume. This prevents recycling the whole scratch pool.
1027 kes Add code to status storage to print boffset_t (largefile support).
1029 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1030 kes You now need a --with-qwt=<dir> to be able to build bat.
1031 kes Update src/win32/cats/bacula_cats.def to include the new
1032 db_get_query_dbids() call on Win32.
1034 kes Correct a problem when selecting a scratch volume and moving
1035 it to another pool that lost some columns.
1036 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1037 kes Enhance Autochanger error messages to include Volume and device name.
1038 kes Rework prune_volumes() code to take account of InChanger flag,
1039 and to handle recycling volumes going to the Scratch pool and
1040 current pool because the RecyclePool directive.
1041 kes Implement a better and more efficient db_get_query_dbids() to
1042 handle creating and passing back a list of DBIds.
1046 kes Start work on new more efficient DBId subroutine. First use
1047 will be for recycling volume to Scratch inchanger.
1048 kes Increase number of JobIds in pruning from 1000 to 10000.
1049 This to be replaced by above routine.
1050 kes Begin implementation of building Qt4 on Win32.
1051 kes Correct typo in fix I added for bad TLS shutdown.
1052 kes Pull 2.0.3 patches into patches directory.
1053 kes Update Release notes. Include qt-console in line count.
1054 kes Update Projects file.
1056 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1057 bug in migration code where a job that spanned two volumes
1060 kes Implement new BST_DESPOOLING blocked state. Change from locking
1061 during despooling in SD to blocking. This means that other threads
1062 can work with the device structure, in particular the reservations
1063 system while despooling.
1065 kes Fix return in reservation message queue that missed clearing
1066 the jcr lock (implemented 26Jun07 below).
1067 kes Rename a number of dev methods to make locking function names
1069 kes Document locking in lock.c. Move lock structures to new file
1072 kes Move reservations message lock to lock jcr only this
1074 kes Move main SD locking code into lock.c (new file).
1075 kes Update Win32 build to include lock.c
1079 kes Dirk committed the qwt library code for drawing graphs in bat.
1080 kes Tweak install of qwt so that it is integrated with ./configure.
1082 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1083 out by Eric (my typo).
1084 ebl Fix configure.in to get batch mode enable
1085 kes Return correct string from authenticate.cpp in bat when connecting
1087 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1088 spurious line drops when using TLS.
1089 kes Do not file reparse points when restoring a file that already
1092 kes Implement Windows reparse points -- similar to directories, but
1093 we do not descend into it. This is a first cut. They seem to
1094 be backed up, but restore is not yet tested.
1095 kes Remove restore_blocking in tls code when shutting a socket to leave
1096 it in blocking mode. Hopefully this will fix the encryption bug
1097 reported by Frank Sweetser.
1098 kes When opening a file for backup, tell the OS that we are going to
1099 read it sequentially -- optimization.
1100 kes Change variable names in authenticate_director() to not conflict
1101 with member names in bat. Caused great confusion with compiler,
1104 kes Queue openssl error messages in case of comm problem.
1105 kes Do shutdown() call if socket terminated.
1106 kes Remove some duplicated code in tls.c
1107 kes Move more of the bsock member variables into private and access
1109 kes Add Frank Sweetser's tls-test to the regression suite.
1111 kes Add Swedish sv.po file
1113 kes Don't print clock skew message in FD if less than 3 seconds diff.
1114 kes Add a bit of VSS info to status client.
1115 kes Implement a first cut of Vista VSS, using Win2003 code.
1117 Release: 2.1.20 beta
1119 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1120 loaded tape but uses first drive).
1121 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1122 This was indeed a Win32 issue.
1124 kes Simplify search of autochanger for in-use Volume.
1125 kes Fix exit condition of check for in-use volume. kes Remove
1126 inappropriate my_postgresql_free_result() in db_close()
1128 kes Fix bad return in FD when encryption signature not found.
1129 Probably caused a crash.
1130 kes Inhibit missing encryption signature error messages for
1131 file types where no signature computed.
1132 kes Correct inverted check on autochanger in reservation system.
1133 kes Tweak debug code in autochanger reservation.
1135 kes Add some additional locking in the cats directory in subroutines
1136 that modify packet variables called from batch insert.
1137 kes Rework how dcrs are allocated. new_dcr() can now be called
1138 with an existing pointer, and it will simply clean it up.
1139 This allows the reservation system to test various different
1140 devices, and will permit easy device changes.
1141 kes A bunch of changes all over to handle new new_dcr() calling
1143 kes Work more on the Volume management in the SD. Remember Volumes
1144 for tape drives and for autochangers (even virtual disk changers).
1145 kes When looking at the Volume list to reserve a drive, handle
1146 autochanger names correctly by interating through the changer
1147 devices. Also call the Director to see if a Volume is suitable
1148 for the current job.
1149 kes Fix some bugs in bscan. Make sure all media records are written.
1150 Make sure that valid JobMedia records are written for disk files.
1151 Previously they were completely wrong.
1152 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1153 that the URLs don't change and so that the developers will all
1154 work off the same copy. Rebuild from scrach.
1155 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1157 Release: 2.1.18 beta
1159 kes Fix seg fault in FD from incorrect digest size.
1160 kes Fix argument to non-OpenSSL crypto.c subroutine.
1162 Release: 2.1.16 beta
1164 kes Remove a few malloc()s from the encryption code.
1165 kes Use the class calls to bsock in filed/backup.c and restore.c in
1166 place of the old bnet_xxx code.
1167 kes Implement code that does an on the fly calculation of the
1168 signing digest during restore of encrypted files. It makes
1169 a best guess at the algorithm, and if it is not correct, will
1170 then revert to the old code which reads the file after it is
1172 kes Implement at least one missing crypto stream in stream_to_ascii()
1173 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1174 #877 where a reload with bad syntax causes Dir to exit.
1176 Cut: 2.1.14 beta (not released)
1178 kes Do not free a volume on a tape drive until another volume is
1179 mounted and read, or the autochanger unloads the volume.
1180 This should help the SD re-use volumes that are already mounted,
1181 and should fix bug #886.
1182 kes Apply patch from user brettedgar that allows gnome2-console include
1183 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1184 kes Apply patch from Lucien Weller that fixes day of week calculation
1185 because of DST flag problem. Fixes bug #887.
1187 kes Move find_next_appendable_volume() to after acquiring a valid device
1188 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1190 kes Unable to reproduce bug 872. However added additional testing for
1192 kes Bug #874 resolved by documenting SQLite limitations.
1193 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1194 kes Bug #881 resolved by removing typo in mtx-changer script.
1195 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1196 approval. Added a link to the wiki on the web page, and implemented
1197 a backup from http://paramount.ind.wpi.edu
1199 kes Fix update allfrompool to pass pool name.
1201 kes Convert to pure GPL v2 license.
1202 kes Fix sscanf problems reported by Peter Buschman that caused
1203 a bus error on Solaris.
1204 kes Rework (simplify) the select prompt in bat.
1205 kes Move get_jobid_from_tid() into lib and create a
1207 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1208 should definitely fix the problem of lost error messages in the
1210 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1211 kes Eliminate tcpd.h from the project. Enclose the #include from the
1212 library with extern C ...
1213 kes Add print of signal name when a signal is trapped.
1215 Release: 2.1.12 beta
1217 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1219 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1220 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1221 makes SQLit3 run 30 times faster, though a bit less safe.
1222 kes Implement --with-batch-insert in configure and detection of thread
1223 safe libraries. It is on by default, but turned off if no thread
1224 safe library (e.g. SQLite 2) is available.
1226 kes Fix Bacula PostgreSQL buffer overruns.
1227 kes Do better checking for NULL results returned from PostgreSQL;
1228 implement retry for failed queries; clear results buffer after
1229 failed query. Hopefully this will correct the PostgreSQL failures.
1231 kes Implement algorithm to handle only one appendable volume with
1232 Prefer Mounted Volumes = no.
1233 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1234 returned from a query.
1235 kes Make volume lock recursive.
1236 kes Implement an additional volume reservation algorithm that
1237 starts by considering all reserved volumes then uses the
1238 old brute force algorithm of searching the resources to
1239 find a suitable device.
1240 kes Add new reservations debug code and refine the old code.
1241 kes Update the win32/dll/bacula.defs file.
1243 kes Tweak reservations algorithm to permit a few more cases, i.e.
1244 volume reserved, but on different drive, ...
1245 kes Enhance SD status to include Pool and Media Type for drive in a
1246 more readable format (a bit longer).
1247 kes Fix PostgreSQL double free.
1249 kes Minor refactoring of restore decryption code.
1250 kes Add code to smartall.c to detect double free of a buffer.
1252 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1253 so that bsmtp will create a correct email address (mailbox only).
1254 kes Modify 'memory' command so that the buffers are listed as 'In use'
1255 to avoid confusion with Orphaned buffers.
1256 kes I reworked the OpenSSL include/lib flags to be handled in
1257 the standard Bacula way, which should fix bug #863 concerning
1258 non-standard OpenSSL libraries.
1260 kes Implement Help Browser window for bat.
1261 kes Fix reload bug that reset StorageId to zero.
1263 kes Fix TLS #ifdefing when TLS turned off.
1264 kes Ensure that when labelling a tape with Slot=0 that InChanger
1266 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1268 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1269 add DISTINCT (required by PostgreSQL).
1270 kes Implement BSOCK authenticate_director() method. Eventually will
1271 authenicate all daemons.
1272 kes Move several more functions into the BSOCK class.
1274 kes Add code to tell the OS that we no longer need a cached
1275 file that we were reading. In findlib/bfile.c. Also,
1276 only cache files that we are reading. Thanks to
1277 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1278 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1279 kes Implement script to automatically generate cats and dll .def
1280 files for Win32 dll.
1281 kes Update README.mingw32 to include new .def file generation.
1282 kes Correct typo in UTF-8 error message as reported by:
1283 jhernandez <julianhernandez@gmail.com>
1284 kes Add additional sm_check() code on debug level 1.
1285 kes Set default debug level to 1.
1286 kes Trap SIGABRT in attempt to get traceback.
1288 kes Reduce bat connect timeout from 30 to 15 seconds.
1289 kes More restructuring and implementing BSOCK class in place of
1291 kes Remove a few unnecessary malloc() tests in crypto code.
1292 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1293 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1294 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1296 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1298 kes Fix Verify InitCatalog. The attributes were not pointing to the
1299 correct saved location.
1300 kes Implement message callback so that GUI is sure to get all
1301 daemon messages. Currently displayed in a dialog in bat.
1302 kes Ignore SIGUSR2 (Bacula timer) in bat.
1303 kes Apply regress patch from bug #859 to allow regress to work
1304 with Solaris compiler.
1306 kes Begin adding TLS support to bat.
1307 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1308 clean up lex.c and make it more readable.
1310 kes Move more bnet functions into the BSOCK class.
1311 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1312 kes Complete change of berrno strerror() method to bstrerror()
1314 Release: 2.1.10 beta
1316 kes Cleanup incorrect email addresses in bsmtp.
1317 kes Make bat display initial messages rather than discard them.
1319 kes First cut of adding .mod to the run command.
1320 kes Implement auto display of messages in bat.
1321 kes Enhanced preferences to allow all Bacula output to be
1324 kes Try to make bsmtp date routines more generic.
1325 kes Fixed bug #856 autochanger documentation.
1326 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1327 kes Add new cats entry point so Win32 builds.
1329 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1331 kes Do better checking for the MySQL 64 bit libraries looking for both
1332 .a and .so libraries.
1333 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1334 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1335 kes Require the thread safe version of MySQL during configure. Thanks
1336 to Andre Noll for pointing this out.
1337 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1338 continuing in migration code.
1339 kes Apply implementation of tray-monitor font derived from gnome-console
1340 submitted by Andreas Piesk <a.piesk@gmx.net>
1342 kes Eliminate important memory loss in SQLite
1343 kes Fixed the batch insert MySQL thread specific data that was not
1344 being freed. See cats/mysql.c:db_thread_cleanup().
1345 kes Fix restore before command.
1346 kes Convert old hdr.name to name() in a few places.
1347 kes Implement update jobid command.
1348 kes Return all time_t dates in db_get_job_record()
1349 kes Stop watchdog in SD earlier.
1350 kes Put Pool just after Storage in please mount message.
1351 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1354 kes Update the po files.
1355 kes Fix Verify InitCatalog by making it cache attributes.
1357 kes Change name bacula-bat to bat for man 1 page to correspond to
1359 kes Check for client and store NULL pointers in status command. This
1361 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1362 kes Fix sign extended editing of %p.
1363 kes Clean out a little old #ifdefing in cats/mysql.c
1365 kes If time diff between DIR and FD is more than 600 seconds convert
1366 INFO message to WARNING.
1367 kes Implement heap size display in status for all daemons.
1368 kes Attempt to fix MySQL db open memory loss (not successfull).
1369 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1370 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1371 Query. This looks like a MySQL but but by doing extra releases,
1372 the memory goes away. This should fix bug #847.
1374 kes When backup fails, cancel SD before waiting for sd termination.
1375 kes If SD is waiting for FD to connect during cancel, wake up the
1377 kes Fix fsf code so that errno is correctly reported.
1378 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1380 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1381 so that Bacula doesn't later stumble into a seg fault.
1382 kes Use the term Restore Client in the restore Job report.
1383 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1384 the original job's FileSetId.
1385 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1386 spooling in migration jobs. Not yet tested.
1387 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1388 reading conf file from a pipe. However, do it with open_bpipe()
1389 rather than popen. Not yet tested.
1391 kes Fix an ugly bug where the VolCatBytes were getting updated
1393 kes Implement bconsole memory command that prints current memory
1394 usage, plus smartalloc dump.
1395 kes Clarify some error messages in backup, admin, and migrate.
1396 kes Shrink label dialog to smaller size.
1397 kes Invert Cancel OK buttons on restore to be OK Cancel.
1398 kes More strerror() to bstrerror() conversions.
1400 kes Start implementing bstrerror() in place of strerror().
1401 kes Stripping path -- seems to work.
1403 kes Prevent door and port files from being restored (mostly
1405 kes Free an unreleased buffer in compat code.
1406 kes Change console Job name from *Console* to -Console- to eliminate
1407 Win32 filename problems. Put Win32 path separator when creating
1408 Console file. This fixes bug #846.
1409 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1411 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1413 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1414 to force Win32 error message.
1416 kes First cut strip path. The data should be passed to the FD,
1417 but nothing is done with it yet.
1418 kes Enhance the digest and signature routines in the crypto
1419 library to accept a JCR and to use it to print error messages
1420 so that they will go in the Job report rather than the daemon's
1422 kes Simplify some of the verify signature code.
1423 kes Simplify a few of the alternative returns in the signature
1426 ebl Use only POSIX regex instead of GNU regex in breg.c for
1427 File relocation. It fix broken freebsd compilation.
1428 kes Convert all other Dir files to use new ua class message
1430 kes Tentative fix for missing digest signature in bug 807.
1431 kes Correct handle problem in new win32_ftruncate routine.
1432 kes Convert ua_purge.c and ua_update.c to use new ua class
1433 message routines for bat.
1435 kes Correct incorrect installation of LICENSE in Win32 installer.
1436 kes Display LICENSE at the beginning of the Win32 install.
1437 kes Attempt to correct the need for the png files to be installed
1439 kes Reapply my bat.conf install script in qt-console. I think I
1440 editted bat.pro instead of bat.pro.in and it was lost.
1441 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1442 the /var/lock/subsys for subsysdir. Also corrects typos in the
1445 kes First cut update job.
1446 kes Correct configure to include qmake of src/qt-console directory.
1448 kes Make restore job yes/mod/no print in one command so GUI works.
1449 kes First cut implementing backup and restore client.
1450 kes Correct editing in Verify output that caused a seg fault.
1452 kes Insure that bat.conf is not overwritten during installation.
1453 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1454 while I was implementing migration in March 2006 !
1456 ebl Cleanup file relocation, using char *RegexWhere instead of
1457 char *where + bool where_use_regexp
1458 kes Update some manpages and add bat manpage.
1459 kes Make a first cut at converting bacula.spec.in for bwx-console
1461 kes Apply patch from John Goerzen to add hostname as fourth argument
1462 to make_catalog_backup script.
1463 kes Fix typos I introduced into bsmtp.c
1464 kes Make pm_strxxx() routines handle input of NULL pointer. This
1465 is to protect from NULL pointers returned from SQL databases.
1466 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1467 kes Add more debug to FIFO code -- fix fifo regression test.
1469 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1470 kes Add thread timer to bnet_connect() to break from OS if wait time
1473 kes Update Win32 build to include new files, new symbols, and
1475 kes Implement socket level heartbeat (tcp_keepidle)
1476 ebl Commit File relocation patch
1477 kes Make bat have 'make install' target.
1478 kes Warn during install if old gnome-console binary found.
1479 kes Warn during install if old wx-console binary found.
1480 kes Add -8 option to bsmtp command line to add content type utf-8.
1481 Fixes bug #809. (Character coding problem in bsmtp).
1482 kes If < is found in target (from, to, cc) then do not enclose the
1483 target in < > in bsmtp. Fixes bug #772 (malformed address).
1484 kes When printing certain items in dbcheck, stop after 300000.
1485 Fixes bug #822. (dbcheck loops).
1486 kes Incorrect status in Dir after waiting for mount with poll set.
1489 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1491 kes Print waiting to reserve a device every 5 mins.
1493 kes Don't call close_part in label.c if tape and relabel.
1494 kes Don't free volume if busy in close() -- should help with
1496 ebl Fix #824 RunScript bug (After script could be execute twice)
1497 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1498 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1499 Add a regression script to test RunScript
1501 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1504 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1505 deprecated. No additional bugs will be fixed, and they will be dropped
1506 in a future release (probably 2.4.0).
1507 kes Change name of wx-console to bwx-console to make it more Bacula
1509 kes Change the name of gnome-console to bgnome-console to make it
1512 kes Some time in March, a Feature Request with patch from Jorj Bauer
1513 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1515 The ability for the director to validate a Client (FD) CN against
1516 an arbitrary set of patterns rather than the hostname, with
1517 A new 'TLS Allowed CN' set of directives which are implemented
1518 in the Client resource. Then pattern matching is used in place
1519 of hostname matching against the Certificate's CN. As an example, we
1520 have certificates which (a) use a local CA, and (b) have a CN of the
1522 kes Add new/changed entry points to Win32 build
1523 kes Create unaccepted-projects for projects that are not accepted.
1524 kes Simplify locking in the reservations system.
1525 kes Add more debug code in reservations.
1526 kes Make sure error condition on reserving a volume is handled correctly.
1527 kes Correct handling of volume_in_use.
1528 kes Correct handling of initializing a device.
1529 kes Move handling of broadcasting releasing a device into release_device().
1530 kes Correct attaching dcr to dev so that it is only done if device
1531 is properly initiated.
1533 kes Locking debug level tweaks in SD.
1534 kes Tweak new Volume code.
1536 kes Add exec external-command [wait-seconds] to bconsole. This
1537 executes the external-command. Note! normally external-command
1538 should be enclosed in double quotes.
1539 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1540 it should normally be off in a production system.
1542 kes Implement die command for SD so that we can force it to dump.
1543 kes Implement SD lock debug code.
1544 kes Implement new algorithm for keeping Volume list in SD. It
1545 is now owned by the device.
1547 kes Implement new code for freeing in use volumes that should
1548 resolve if not all, some of the problems of multiple drive
1549 tape conflicts described in bug 801.
1551 kes Fix gui/bacula-web/images files in svn.
1552 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1554 ebl Fix a bug in batch mode (in string escape)
1555 kes Correct migration prune SQL typo that crept in in a
1556 recent 2.1.x change.
1558 kes Move bnet_despool() into class in bsock.c
1559 kes Modify job report to include director name and Build OS.
1560 kes Move drop root privilege and check_catalog() before fork.
1561 kes Add update database scripts (version 9 to 10) to updatedb directory.
1563 ebl Check size and age of each file after its backup to see if
1564 it has changed during backup, if 'checkfilechanges' is set.
1565 The FD will do an extra check (stat(2)) after
1566 each file backup. mtime, ctime and size are compared with
1567 'before backup' information. If time or size mismatch, an
1568 error message will be generated. You must upgrade FD to use it.
1570 kes Make database name and user configurable
1571 --with-db-name=xxx --with-db-user=xxx
1572 kes Add back database type to message.c for debugging.
1574 kes Implement dir_sql() which issues an SQL query.
1575 kes Modify bat medialist to use dir_sql() and do some minor C++
1576 formatting as well as eliminating a number of pointers, simplifing
1579 kes Fix some of the mtx-changer grep commands for tape label readers.
1580 kes Convert a number of bsendmsg into the appropriate send/warning/error
1581 message class calls.
1582 kes Suppress the using database message in the .sql command.
1583 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1585 kes Add context menu for floating a window.
1586 kes Some minor cleanup and name changes in qt-console
1587 kes Add doing mt setblk 0 in Win32 mtx-changer.
1588 kes Apply Martin's bug fix to move definition of ENODATA for
1590 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1591 sqlite2 and sqlite3.
1593 kes More pruning cleanup.
1594 kes Turn on wait_for_drive by default in mtx-changer.
1595 kes Turn on Batch insert code by default as it now passes regression.
1596 kes Add ./configure --enable-bat to enable building of Bat.
1597 No install yet though.
1599 kes Implement a new .sql command for bat.
1600 kes Implement code to turn off pruning in obtaining the next volume.
1601 Pruning is turned off for the status dir command, but turned on
1602 for SD requests and for the list nextvolume command.
1604 kes Correct Qmsg() that was not updated correctly when committing a
1605 previous change (probably the recent TLS patch).
1607 kes Write new subroutine is_volume_purged() that explicitly checks
1608 if the Volume is purged, and if so marks it as such. This should
1609 resolve problems reported about needing to mount twice to recycle
1611 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1612 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1613 amount of duplicated code.
1614 kes Do volume pruning only for the Media Type desired (reduces pruning time
1615 if multiple Media Types are in the same pool).
1616 kes Implement more detailed info in the Job report for the Bacula version
1618 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1620 ebl Add bbatch tool to bench database and insert mode.
1621 Fix sql quote stuff in batch mode
1622 Fix sql stuff for mysql
1624 kes Correct problems with am/pm scheduling. Fixes bug #808.
1625 kes Implement new prunning code that prunes up to 1000 jobs at
1626 the same time. The same technique can be applied to a number
1627 of other prune/purge subroutines.
1628 kes Add an insanity check when starting a new tape job to ensure
1629 that the tape position has not been changed. If so fail the
1631 kes Fix Win32 build for dlls to add the folllowing:
1632 src/lib/bsock.c -- new file with new entry points
1633 src/lib/dlist.c -- new entry points
1634 src/cats/sql_create.c -- new entry point
1635 src/cats/sql_cmds.c -- new DATA item exported
1637 ebl batch mode cleanup bscan-test is ok now.
1638 kes Implement SD code to check length of disk volume before appending.
1640 kes Correct return status on db_batch... routines.
1641 kes Add call to db_write_batch_file_records() to migration code.
1642 ebl Fix AfterJob timing
1643 kes Move the checking of the database in initializion of the Director
1644 to after we drop privileges. This avoids the need for both root
1645 and bacula access to the DB.
1646 kes Correct a misplaced variable definition in src/filed/backup.c
1647 kes Correct how the new batch insert db_create_attributes_record()
1648 uses the arguments. Caused a seg fault in bscan.
1649 kes Implement lock() and unlock() methods in DEVICE class.
1650 Implement block() and set_block(xx) methods in DEVICE class.
1651 kes Modify bnet_connect() so that it uses time() to check for the
1652 wait time expiring (on some OSes, some system calls may not
1653 return immediately).
1654 kes Modify Verify to obtain the previous JobId when it is actually
1655 running rather than at schedule time (as it was in 1.38.x).
1656 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1658 kes When checking pid in pid file, continue running if the pid is
1659 the same as ours. This occurs on IRIX after a system crash.
1662 kes Extend new GUI API.
1663 kes Make the ua structure a class, and implement send_msg(),
1664 error_msg(), warning_msg(), and info_msg().
1666 kes Apply fix from for building wx-console on the Mac from
1668 kes Implement new select mechanism for GUI programs.
1669 kes Reorganize initialization of stackedWidgets in bat.
1671 kes Add updated nagios plugin supplied by Christian Masopust.
1673 kes More bat implementation.
1674 kes File migrate bug with Pool Occupancy using mediaid instead
1675 of jobids. Fixes bug #795.
1676 kes Fix orphaned buffers in filed backup and verify due to
1677 crypto buffers not freed during errors. Fixes bug #789.
1678 kes Extend new GUI api code to tree commands.
1679 kes Ensure that tree and dot commands check console ACLs.
1680 kes Permit marking directory with trailing slash.
1681 kes Allow 20 console connections (instead of only 10).
1683 kes Add smartctl call to bacula-sd.conf as an example of getting
1686 kes Modify jobq.c to let simultaneous restore jobs run. This may
1687 cause them to fail if they cannot get a drive.
1688 kes Add Client Connect Wait to Storage daemon to permit users to
1689 modify the time the SD waits for a FD connection.
1691 kes Correct virtual changer check which was backwards. This caused
1692 volumes to be unloaded into slots already occupied.
1694 kes Apply Command ACL filter to JobId list in restore command.
1695 kes Correct typeo in var.c patch.
1697 kes Don't let Bacula prune File or Job records for the current Job.
1698 kes Fix variable substitution pad + inc bug reported (with patch)
1701 kes Correct SQLite log table index as reported by Luca Berra.
1703 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1705 kes Begin implementing new comm signals for API.
1706 kes Fix a few places in lib/message.c where the open fd may
1708 kes Continue implementing lib/bsock.c (real class). Make jcr,
1709 who, host, and port private. There are new methods to access
1710 them for non-class use. This required touching a number of files.
1712 kes Add LANG=C to autoconf/randpass so it works with languages other
1713 than English. Fixes bug #788.
1715 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1717 You will not be able to generate Include/Exclude list any more.
1718 It will be fixed soon.
1719 If you want to use this, you can apply
1720 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1722 kes Restore of sockets created false error messages because Bacula
1723 no longer restores sockets, but the code was still trying to
1724 set the attributes on a non-existent file. Reported by a user.
1725 ebl finish RecyclePool feature
1726 Media will takes Pool.RecyclePool
1727 when moving from Scratch to a Pool or when user will do
1728 update volume=xxx frompool
1729 To use it, add RecyclePool = aPool to your Pool resource
1732 RecyclePool = Scratch
1736 kes Expand new BSOCK class adding signal() and new BNET signals.
1737 kes Begin enhancing the dot commands adding a new API function
1738 that returns more information and will make it easier
1739 to interface to the Director from a program.
1741 kes Make DEVICE fd private. Its new name is m_fd, and can be
1742 obtained with dev->fd() outside the class. This is the
1743 first of many DEVICE members to be made private.
1744 kes Implement Michael Renner's idea on having a virtual disk
1745 changer. I made some minor modifications (e.g. I did not
1746 implement the Virtual Changer directive, but simply set
1747 the Changer Command to an empty string.
1749 kes Implement a BSOCK send() method that writes the whole record
1750 in a single write() request rather than in two.
1751 ebl add update volume=xxx recyclepool=yyyy
1752 volume takes recyclepool from pool when using update volume=xxx from pool
1754 kes Fix encryption deblocking bug, which caused some restored files
1755 to be truncated. This fixes bug #763.
1756 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1757 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1759 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1760 ebl Use btime_t instead of uint64_t in media patch.
1762 kes Optimize the use of the database a bit in the Status dir command.
1763 Only open it when needed, ensure that if any previous database
1764 was opened, it is closed.
1766 kes Correct VolCatBytes bug from media patch.
1767 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1768 in the case of orphaned records.
1769 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1770 and File records in 300K chunks to be more efficient. This
1771 idea came from Juan Luis Frances (if I remember right).
1772 kes Apply Eric's scratch patch that moves a purged Volume to
1773 the RecyclePool. Question: how is RecyclePool set? what
1774 happens to the ScratchPool?
1775 kes Apply Eric's media patch that collects read/write media
1776 times as well as byte counts. This patch requires a
1777 simultaneous upgrade of the DIR and SD. Note, there
1778 should be some way to turn off timing. I'm not sure
1779 times are in Bacula units.
1780 kes Apply Eric's batch-insert patch.
1782 kes Update projects list.
1784 kes Implement Include/Exclude file lists in FD as dlists using
1785 the new dlistString class. This permits efficiently having
1786 large include/exclude lists and completes project Item 25.
1787 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1788 console is authorized to cancel the job. This fixes bug
1790 kes Modify SD so that the VolCatJobs medium record is updated
1791 at the beginning of a Job rather than the end. This
1792 fixes bug #775 where exceeding MaxVolJobs caused jobs
1794 kes Added a mutex around getting and setting Volume information
1795 so that multiple simultaneous jobs will single thread.
1797 Switch to using Subversion
1798 kes Remove src/pygtk-console/ from configure
1800 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1801 plus the entrypoints.
1802 kes Apply patch supplied that corrects debug print
1803 in canceling jobs for max run time. Supplied as
1804 part of bug #621, which was previously fixed.
1806 kes Test on job_canceled() and sd_msg_thread_done inside
1807 loop starting the message thread to avoid a race condition.
1809 kes Remove rl_catch_signal from console.c as it conflicted
1810 with the header definition. Fixes bug #765.
1811 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1813 kes Clarify some stored/acquire messages to indicate if the
1814 problem is with read or append.
1816 kes Fix memory leak with storage ids in cats/sql_get.c
1817 kes Terminate watchdog earlier to avoid reference to released
1818 memory -- reported by Jason Austin.
1819 kes Move closing the database from jobq.c to the director daemon
1820 termination routine. This fixes memory leaks for shadow jobs
1821 (i.e. migration jobs).
1822 kes Free up the unique jobid chain items in migrate.c. This fixes
1823 a memory leak problem.
1824 kes Convert some ugly looking for statements to use foreach_alist
1825 in findlib/find.c. This will facilitate converting the structures
1826 to use dlist (for large include/exclude lists).
1827 kes Fix a bug in the btree.c and btree.h routines, then rename them
1828 rblist and add them to be built in src/lib. Include some new
1829 methods written by Rudolf Cejka that make the code more readable
1830 (hides some of the ugly casting).
1831 kes Add set_next() and set_prev() methods which make the code much more
1832 readable. Also add a new dlistString class that facilitates storing
1833 strings in dlists. To be used in the large include/exclude lists.
1834 kes Make some trivial modifications to lib/tree.h that use rblist
1835 rather than dlist for storing the tree links. This was suggested
1836 by Rudolf Cejka. The result of this is that the restore tree now
1837 uses red-black binary trees rather than simple linked lists. This
1838 should give rather dramatic speed improvements for directories
1839 contining large numbers of directories/files (more than 10000).
1841 kes Fix maxruntime bug #621.
1843 ebl Implement the include JobID in spool file name project.
1844 kes Reorder projects file in order determined by Jan 2007 vote.
1845 kes Implement item #12 on project list -- quick release of FD by
1847 kes Fix open of SQLite3 db where user does not have write permission
1848 so that DIR does not crash. Fixes bug #761.
1850 kes Add back missing @ in Win32 Makefile.
1851 kes Change 'Device not configured to autolabel' from INFO
1853 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1854 which should restart an indefinite # of times.
1855 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1856 other DIR specifications.
1858 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1859 Fix path quoting in SQLite scripts.
1860 Fix problems with SHGetFolderPath.
1862 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1864 kes Fix Job restart on error bug that promotes an Inc to a Full
1865 backup. This should fix bug #755.
1866 kes Add qt-console and first cut of code.
1870 kes Fix Bacula->Documentation link on Win32 to point to index.html
1871 instead of bacula.html. Fixed bug #750.
1872 kes Return JobId in db_get_job_record() when JobId==0. This should
1874 kes Do not release source pointers when restarting a failed job.
1876 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1877 This *should* fix bug #747.
1878 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1881 kes Modify USTORE constructor to set an empty store_source string,
1882 and don't copy the store_source string in a cancel. Hopefully
1883 this will fix Arno's seg fault, bug #744.
1884 kes Add back code to disable conio in configure. Fixes bug #743.
1885 kes Correct the Options scanner in the FD to correctly handle
1886 SHA1 option, which was eating the next option. Reported by
1888 kes Add code to indicate when the SD is spooling, spool wait, and
1889 despooling as requested by Alan Brown.
1891 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob